select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
+ select RTC_LIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
bool
config GENERIC_TIME
- def_bool n
+ def_bool y
config GENERIC_CLOCKEVENTS
- def_bool n
+ def_bool y
config GENERIC_CLOCKEVENTS_BROADCAST
bool
+config GENERIC_CMOS_UPDATE
+ def_bool y
+ depends on SH_SH03 || SH_DREAMCAST
+
config GENERIC_LOCKBREAK
def_bool y
depends on SMP && PREEMPT
config SYS_SUPPORTS_CMT
bool
+config SYS_SUPPORTS_MTU2
+ bool
+
+config SYS_SUPPORTS_TMU
+ bool
+
config STACKTRACE_SUPPORT
def_bool y
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
+ select SYS_SUPPORTS_TMU
config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
- select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
select CPU_HAS_FPU if !CPU_SH4AL_DSP
+ select SYS_SUPPORTS_TMU
config CPU_SH4A
bool
config CPU_SH5
bool
select CPU_HAS_FPU
+ select SYS_SUPPORTS_TMU
config CPU_SHX2
bool
bool "Support SH7201 processor"
select CPU_SH2A
select CPU_HAS_FPU
+ select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_MTU2
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
+ select SYS_SUPPORTS_MTU2
help
Select MX-G if running on an R8A03022BG part.
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
+ select SYS_SUPPORTS_CMT
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
+ select SYS_SUPPORTS_CMT
help
Select SH7721 if you have a SH3-DSP SH7721 CPU.
help
Select SH7723 if you have an SH-MobileR2 CPU.
+config CPU_SUBTYPE_SH7724
+ bool "Support SH7724 processor"
+ select CPU_SH4A
+ select CPU_SHX2
+ select ARCH_SHMOBILE
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_CMT
+ help
+ Select SH7724 if you have an SH-MobileR2R CPU.
+
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
menu "Timer and clock configuration"
-config SH_TMU
- bool "TMU timer support"
- depends on CPU_SH3 || CPU_SH4
+config SH_TIMER_TMU
+ bool "TMU timer driver"
+ depends on SYS_SUPPORTS_TMU
default y
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
help
- This enables the use of the TMU as the system timer.
+ This enables the build of the TMU timer driver.
-config SH_CMT
- bool "CMT timer support"
- depends on SYS_SUPPORTS_CMT && CPU_SH2
+config SH_TIMER_CMT
+ bool "CMT timer driver"
+ depends on SYS_SUPPORTS_CMT
default y
help
- This enables the use of the CMT as the system timer.
-
-#
-# Support for the new-style CMT driver. This will replace SH_CMT
-# once its other dependencies are merged.
-#
-config SH_TIMER_CMT
- bool "CMT clockevents driver"
- depends on SYS_SUPPORTS_CMT && !SH_CMT
- select GENERIC_CLOCKEVENTS
+ This enables build of the CMT timer driver.
-config SH_MTU2
- bool "MTU2 timer support"
- depends on CPU_SH2A
+config SH_TIMER_MTU2
+ bool "MTU2 timer driver"
+ depends on SYS_SUPPORTS_MTU2
default y
help
- This enables the use of the MTU2 as the system timer.
-
-config SH_TIMER_IRQ
- int
- default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
- CPU_SUBTYPE_SH7763
- default "86" if CPU_SUBTYPE_SH7619
- default "140" if CPU_SUBTYPE_SH7206
- default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
- default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
- default "238" if CPU_SUBTYPE_MXG
- default "16"
+ This enables build of the MTU2 timer driver.
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
- CPU_SUBTYPE_SH7786
+ CPU_SUBTYPE_SH7786 || CPU_SUBTYPE_SH7724
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
This is necessary for determining the reference clock value on
platforms lacking an RTC.
+config SH_CLK_CPG
+ def_bool y
+
+config SH_CLK_CPG_LEGACY
+ depends on SH_CLK_CPG
+ def_bool y if !CPU_SUBTYPE_SH7785
+
config SH_CLK_MD
int "CPU Mode Pin Setting"
depends on CPU_SH2
menu "Boot options"
config ZERO_PAGE_OFFSET
- hex "Zero page offset"
- default "0x00004000" if SH_SH03
- default "0x00010000" if PAGE_SIZE_64KB
+ hex
+ default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
+ SH_7751_SOLUTION_ENGINE
+ default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
default "0x00002000" if PAGE_SIZE_8KB
default "0x00001000"
help
This sets the default offset of zero page.
config BOOT_LINK_OFFSET
- hex "Link address offset for booting"
+ hex
+ default "0x00210000" if SH_SHMIN
+ default "0x00400000" if SH_CAYMAN
+ default "0x00810000" if SH_7780_SOLUTION_ENGINE
+ default "0x009e0000" if SH_TITAN
+ default "0x01800000" if SH_SDK7780
+ default "0x02000000" if SH_EDOSK7760
default "0x00800000"
help
This option allows you to set the link address offset of the zImage.
This can be useful if you are on a board which has a small amount of
memory.
+config ENTRY_OFFSET
+ hex
+ default "0x00001000" if PAGE_SIZE_4KB
+ default "0x00002000" if PAGE_SIZE_8KB
+ default "0x00004000" if PAGE_SIZE_16KB
+ default "0x00010000" if PAGE_SIZE_64KB
+ default "0x00000000"
+
config UBC_WAKEUP
bool "Wakeup UBC on startup"
depends on CPU_SH4 && !CPU_SH4A
If unsure, say N.
-config SH64_USER_MISALIGNED_FIXUP
- def_bool y
- prompt "Fixup misaligned loads/stores occurring in user mode"
- depends on SUPERH64
-
config SH64_ID2815_WORKAROUND
bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
depends on CPU_SUBTYPE_SH5_101
See <file:Documentation/sh/register-banks.txt> for further
information on SR.RB and register banking in the kernel in general.
-config CPU_HAS_PTEA
- bool
-
config CPU_HAS_PTEAEX
bool
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
CPU_SUBTYPE_SH7343
- default "0xffe80000" if CPU_SH4
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
+ default "0xffe80000" if CPU_SH4
default "0x00000000"
config EARLY_PRINTK
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
- depends on DEBUG_KERNEL && SUPERH32
+ depends on DEBUG_KERNEL && SUPERH32 && BROKEN
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
For all other cases, say N. If this option seems perplexing, or
you aren't sure, say N.
-config MORE_COMPILE_OPTIONS
- bool "Add any additional compile options"
- help
- If you want to add additional CFLAGS to the kernel build, enable this
- option and then enter what you would like to add in the next question.
- Note however that -g is already appended with the selection of KGDB.
-
-config COMPILE_OPTIONS
- string "Additional compile arguments"
- depends on MORE_COMPILE_OPTIONS
-
config SH64_SR_WATCH
bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
depends on SUPERH64
-config POOR_MANS_STRACE
- bool "Debug: enable rudimentary strace facility"
- depends on SUPERH64
- help
- This option allows system calls to be traced to the console. It also
- aids in detecting kernel stack underflow. It is useful for debugging
- early-userland problems (e.g. init incurring fatal exceptions.)
-
endmenu
cflags-y += $(call cc-option,-mno-fdpic)
cflags-y += $(isaflags-y) -ffreestanding
-cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \
- $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g')
-
OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \
-R .stab -R .stabstr -S
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
# Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG := shx3_defconfig
KBUILD_IMAGE := $(defaultimage-y)
#
# error messages during linking.
#
ifdef CONFIG_SUPERH32
-UTS_MACHINE := sh
-LDFLAGS_vmlinux += -e _stext
+UTS_MACHINE := sh
+BITS := 32
+LDFLAGS_vmlinux += -e _stext
+KBUILD_DEFCONFIG := shx3_defconfig
else
-UTS_MACHINE := sh64
-LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
- --defsym phys_stext_shmedia=phys_stext+1 \
- -e phys_stext_shmedia
+UTS_MACHINE := sh64
+BITS := 64
+LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
+ --defsym phys_stext_shmedia=phys_stext+1 \
+ -e phys_stext_shmedia
+KBUILD_DEFCONFIG := cayman_defconfig
+endif
+
+ifneq ($(SUBARCH),$(ARCH))
+ ifeq ($(CROSS_COMPILE),)
+ CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-)
+ endif
endif
ifdef CONFIG_CPU_LITTLE_ENDIAN
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64'
+ld-bfd := elf32-$(UTS_MACHINE)-linux
+LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
LDFLAGS += -EL
else
-LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4'
+ld-bfd := elf32-$(UTS_MACHINE)big-linux
+LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
LDFLAGS += -EB
endif
-head-y := arch/sh/kernel/init_task.o
-head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o
-head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o
+export ld-bfd BITS
+
+head-y := arch/sh/kernel/init_task.o arch/sh/kernel/head_$(BITS).o
core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
compressed: zImage
-archprepare: maketools arch/sh/lib64/syscalltab.h
+archprepare: maketools
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
+ $(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
define archhelp
@echo '* zImage - Compressed kernel image'
@echo ' uImage.srec - Create an S-record for U-Boot'
endef
-define filechk_gen-syscalltab
- (set -e; \
- echo "/*"; \
- echo " * DO NOT MODIFY."; \
- echo " *"; \
- echo " * This file was generated by arch/sh/Makefile"; \
- echo " * Any changes will be reverted at build time."; \
- echo " */"; \
- echo ""; \
- echo "#ifndef __SYSCALLTAB_H"; \
- echo "#define __SYSCALLTAB_H"; \
- echo ""; \
- echo "#include <linux/kernel.h>"; \
- echo ""; \
- echo "struct syscall_info {"; \
- echo " const char *name;"; \
- echo "} syscall_info_table[] = {"; \
- sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \
- s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \
- echo "};"; \
- echo ""; \
- echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\
- echo ""; \
- echo "#endif /* __SYSCALLTAB_H */" )
-endef
-
-arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
- $(call filechk,gen-syscalltab)
-
-CLEAN_FILES += arch/sh/lib64/syscalltab.h \
- include/asm-sh/machtypes.h
+CLEAN_FILES += include/asm-sh/machtypes.h
Select 7722 SolutionEngine if configuring for a Hitachi SH772
evaluation board.
+config SH_7724_SOLUTION_ENGINE
+ bool "SolutionEngine7724"
+ select SOLUTION_ENGINE
+ depends on CPU_SUBTYPE_SH7724
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+ evaluation board.
+
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
select SOLUTION_ENGINE
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
- select IO_TRAPPED
+ select IO_TRAPPED if MMU
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
- select IO_TRAPPED
+ select IO_TRAPPED if MMU
config SH_SH7785LCR
bool "SH7785LCR"
depends on CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
- select IO_TRAPPED
+ select IO_TRAPPED if MMU
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
* Renesas Technology Corp. R0P7785LC0011RL Support.
*
* Copyright (C) 2008 Yoshihiro Shimoda
+ * Copyright (C) 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sm501.h>
#include <linux/i2c-pca-platform.h>
#include <linux/i2c-algo-pca.h>
#include <linux/irq.h>
-#include <asm/heartbeat.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
#include <mach/sh7785lcr.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <cpu/sh7785.h>
/*
* NOTE: This board has 2 physical memory maps.
plat_irq_setup_pins(IRQ_MODE_IRQ3210);
}
+static int sh7785lcr_clk_init(void)
+{
+ struct clk *clk;
+ int ret;
+
+ clk = clk_get(NULL, "extal");
+ if (!clk || IS_ERR(clk))
+ return PTR_ERR(clk);
+ ret = clk_set_rate(clk, 33333333);
+ clk_put(clk);
+
+ return ret;
+}
+
static void sh7785lcr_power_off(void)
{
unsigned char *p;
writel(0x000307c2, sm501_reg);
}
+/* Return the board specific boot mode pin configuration */
+static int sh7785lcr_mode_pins(void)
+{
+ int value = 0;
+
+ /* These are the factory default settings of S1 and S2.
+ * If you change these dip switches then you will need to
+ * adjust the values below as well.
+ */
+ value |= 1 << MODE_PIN_MODE4; /* Clock Mode 16 */
+ value |= 1 << MODE_PIN_MODE5; /* 32-bit Area0 bus width */
+ value |= 1 << MODE_PIN_MODE6; /* 32-bit Area0 bus width */
+ value |= 1 << MODE_PIN_MODE7; /* Area 0 SRAM interface [fixed] */
+ value |= 1 << MODE_PIN_MODE8; /* Little Endian */
+ value |= 1 << MODE_PIN_MODE9; /* Master Mode */
+ value |= 1 << MODE_PIN_MODE14; /* No PLL step-up */
+
+ return value;
+}
+
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_sh7785lcr __initmv = {
.mv_name = "SH7785LCR",
.mv_setup = sh7785lcr_setup,
+ .mv_clk_init = sh7785lcr_clk_init,
.mv_init_irq = init_sh7785lcr_IRQ,
+ .mv_mode_pins = sh7785lcr_mode_pins,
};
#
# Makefile for the Hitachi Cayman specific parts of the kernel
#
-obj-y := setup.o irq.o
+obj-y := setup.o irq.o panic.o
return irq;
}
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
- if (irq < NR_INTC_IRQS) {
- return intc_irq_describe(p, irq);
- } else if (irq < NR_INTC_IRQS + 8) {
- return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
- } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
- return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
- }
-
- return 0;
-}
-#endif
-
void init_cayman_irq(void)
{
int i;
- epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+ epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
if (!epld_virt) {
printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
return;
--- /dev/null
+/*
+ * Copyright (C) 2003 Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <cpu/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+static void poor_mans_delay(void)
+{
+ int i;
+
+ for (i = 0; i < 2500000; i++)
+ cpu_relax();
+}
+
+static void show_value(unsigned long x)
+{
+ int i;
+ unsigned nibble;
+ for (i = 0; i < 8; i++) {
+ nibble = ((x >> (i * 4)) & 0xf);
+
+ __raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
+ HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+ }
+}
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+ unsigned long panicEXPEVT)
+{
+ while (1) {
+ /* This piece of code displays the PC on the LED display */
+ show_value(panicPC);
+ poor_mans_delay();
+ show_value(panicSSR);
+ poor_mans_delay();
+ show_value(panicEXPEVT);
+ poor_mans_delay();
+ }
+}
{
unsigned char devid, devrev;
- smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+ smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
if (!smsc_superio_virt) {
panic("Unable to remap SMSC SuperIO\n");
}
extern struct irq_chip systemasic_int;
extern void aica_time_init(void);
-extern int gapspci_init(void);
extern int systemasic_irq_demux(int);
static void __init dreamcast_setup(char **cmdline_p)
handle_level_irq);
board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
- if (gapspci_init() < 0)
- printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
}
static struct sh_machine_vector mv_dreamcast __initmv = {
*/
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/ata_platform.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
.resource = sm501_resources,
};
+static struct mtd_partition r2d_partitions[] = {
+ {
+ .name = "U-Boot",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Environment",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x001c0000,
+ }, {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(r2d_partitions),
+ .parts = r2d_partitions,
+};
+
+static struct resource flash_resource = {
+ .start = 0x00000000,
+ .end = 0x02000000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
static struct platform_device *rts7751r2d_devices[] __initdata = {
&sm501_device,
&heartbeat_device,
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
+ if (mach_is_r2d_plus())
+ platform_device_register(&flash_device);
+
spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
return platform_add_devices(rts7751r2d_devices,
--- /dev/null
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y := setup.o irq.o
\ No newline at end of file
--- /dev/null
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+ unsigned long sraddr;
+ unsigned long mraddr;
+ unsigned short mask;
+ unsigned int base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+ if (irq >= IRQ0_BASE &&
+ irq <= IRQ0_END)
+ return IRQ0_IRQ;
+ else if (irq >= IRQ1_BASE &&
+ irq <= IRQ1_END)
+ return IRQ1_IRQ;
+ else
+ return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+ struct fpga_irq set;
+
+ switch (irq) {
+ case IRQ0_IRQ:
+ set.sraddr = IRQ0_SR;
+ set.mraddr = IRQ0_MR;
+ set.mask = IRQ0_MASK;
+ set.base = IRQ0_BASE;
+ break;
+ case IRQ1_IRQ:
+ set.sraddr = IRQ1_SR;
+ set.mraddr = IRQ1_MR;
+ set.mask = IRQ1_MASK;
+ set.base = IRQ1_BASE;
+ break;
+ default:
+ set.sraddr = IRQ2_SR;
+ set.mraddr = IRQ2_MR;
+ set.mask = IRQ2_MASK;
+ set.base = IRQ2_BASE;
+ break;
+ }
+
+ return set;
+}
+
+static void disable_se7724_irq(unsigned int irq)
+{
+ struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+ unsigned int bit = irq - set.base;
+ ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(unsigned int irq)
+{
+ struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+ unsigned int bit = irq - set.base;
+ ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+ .name = "SE7724-FPGA",
+ .mask = disable_se7724_irq,
+ .unmask = enable_se7724_irq,
+ .mask_ack = disable_se7724_irq,
+};
+
+static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+ struct fpga_irq set = get_fpga_irq(irq);
+ unsigned short intv = ctrl_inw(set.sraddr);
+ struct irq_desc *ext_desc;
+ unsigned int ext_irq = set.base;
+
+ intv &= set.mask;
+
+ while (intv) {
+ if (intv & 0x0001) {
+ ext_desc = irq_desc + ext_irq;
+ handle_level_irq(ext_irq, ext_desc);
+ }
+ intv >>= 1;
+ ext_irq++;
+ }
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+ int i;
+
+ ctrl_outw(0xffff, IRQ0_MR); /* mask all */
+ ctrl_outw(0xffff, IRQ1_MR); /* mask all */
+ ctrl_outw(0xffff, IRQ2_MR); /* mask all */
+ ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
+ ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
+ ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
+ ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+
+ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+ set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
+ &se7724_irq_chip,
+ handle_level_irq, "level");
+
+ set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+ set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+ set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+ set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+ set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
--- /dev/null
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+#include <cpu/sh7724.h>
+#include <mach-se/mach/se7724.h>
+
+/*
+ * SWx 1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100 : default
+ * SW32 : 0111 1111 : use on board flash
+ *
+ * SW41 : abxx xxxx -> a = 0 : Analog monitor
+ * 1 : Digital monitor
+ * b = 0 : VGA
+ * 1 : SVGA
+ */
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+ .regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+ [0] = {
+ .name = "SMC91C111" ,
+ .start = 0x1a300300,
+ .end = 0x1a30030f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ0_SMC,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_eth_device = {
+ .name = "smc91x",
+ .num_resources = ARRAY_SIZE(smc91x_eth_resources),
+ .resource = smc91x_eth_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (1 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (2 * 1024 * 1024),
+ }, {
+ .name = "free-area",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x01ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+};
+
+/* LCDC */
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .clock_source = LCDC_CLK_EXTERNAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .clock_divider = 1,
+ .lcd_cfg = {
+ .name = "LB070WV1",
+ .sync = 0, /* hsync and vsync are active low */
+ },
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
+ .board_cfg = {
+ },
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000,
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 106,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ },
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+ [0] = {
+ .name = "CEU0",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu0_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(ceu0_resources),
+ .resource = ceu0_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu0_info,
+ },
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+ [0] = {
+ .name = "CEU1",
+ .start = 0xfe914000,
+ .end = 0xfe91409f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 63,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu1_device = {
+ .name = "sh_mobile_ceu",
+ .id = 1, /* "ceu1" clock */
+ .num_resources = ARRAY_SIZE(ceu1_resources),
+ .resource = ceu1_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu1_info,
+ },
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+ .mode = SH_KEYSC_MODE_1,
+ .scan_timing = 10,
+ .delay = 50,
+ .keycodes = {
+ KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+ KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+ KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+ KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+ KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+ KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+ },
+};
+
+static struct resource keysc_resources[] = {
+ [0] = {
+ .start = 0x1a204000,
+ .end = 0x1a20400f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ0_KEY,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device keysc_device = {
+ .name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
+ .num_resources = ARRAY_SIZE(keysc_resources),
+ .resource = keysc_resources,
+ .dev = {
+ .platform_data = &keysc_info,
+ },
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+ &heartbeat_device,
+ &smc91x_eth_device,
+ &lcdc_device,
+ &nor_flash_device,
+ &ceu0_device,
+ &ceu1_device,
+ &keysc_device,
+};
+
+#define SW4140 0xBA201000
+#define FPGA_OUT 0xBA200400
+#define PORT_HIZA 0xA4050158
+
+#define SW41_A 0x0100
+#define SW41_B 0x0200
+#define SW41_C 0x0400
+#define SW41_D 0x0800
+#define SW41_E 0x1000
+#define SW41_F 0x2000
+#define SW41_G 0x4000
+#define SW41_H 0x8000
+static int __init devices_setup(void)
+{
+ u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+
+ /* Reset Release */
+ ctrl_outw(ctrl_inw(FPGA_OUT) &
+ ~((1 << 1) | /* LAN */
+ (1 << 6) | /* VIDEO DAC */
+ (1 << 12)), /* USB0 */
+ FPGA_OUT);
+
+ /* enable IRQ 0,1,2 */
+ gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+ gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+ gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+ /* enable SCIFA3 */
+ gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+ gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+ gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+ gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+ gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+ /* enable LCDC */
+ gpio_request(GPIO_FN_LCDD23, NULL);
+ gpio_request(GPIO_FN_LCDD22, NULL);
+ gpio_request(GPIO_FN_LCDD21, NULL);
+ gpio_request(GPIO_FN_LCDD20, NULL);
+ gpio_request(GPIO_FN_LCDD19, NULL);
+ gpio_request(GPIO_FN_LCDD18, NULL);
+ gpio_request(GPIO_FN_LCDD17, NULL);
+ gpio_request(GPIO_FN_LCDD16, NULL);
+ gpio_request(GPIO_FN_LCDD15, NULL);
+ gpio_request(GPIO_FN_LCDD14, NULL);
+ gpio_request(GPIO_FN_LCDD13, NULL);
+ gpio_request(GPIO_FN_LCDD12, NULL);
+ gpio_request(GPIO_FN_LCDD11, NULL);
+ gpio_request(GPIO_FN_LCDD10, NULL);
+ gpio_request(GPIO_FN_LCDD9, NULL);
+ gpio_request(GPIO_FN_LCDD8, NULL);
+ gpio_request(GPIO_FN_LCDD7, NULL);
+ gpio_request(GPIO_FN_LCDD6, NULL);
+ gpio_request(GPIO_FN_LCDD5, NULL);
+ gpio_request(GPIO_FN_LCDD4, NULL);
+ gpio_request(GPIO_FN_LCDD3, NULL);
+ gpio_request(GPIO_FN_LCDD2, NULL);
+ gpio_request(GPIO_FN_LCDD1, NULL);
+ gpio_request(GPIO_FN_LCDD0, NULL);
+ gpio_request(GPIO_FN_LCDDISP, NULL);
+ gpio_request(GPIO_FN_LCDHSYN, NULL);
+ gpio_request(GPIO_FN_LCDDCK, NULL);
+ gpio_request(GPIO_FN_LCDVSYN, NULL);
+ gpio_request(GPIO_FN_LCDDON, NULL);
+ gpio_request(GPIO_FN_LCDVEPWC, NULL);
+ gpio_request(GPIO_FN_LCDVCPWC, NULL);
+ gpio_request(GPIO_FN_LCDRD, NULL);
+ gpio_request(GPIO_FN_LCDLCLK, NULL);
+ ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+ /* enable CEU0 */
+ gpio_request(GPIO_FN_VIO0_D15, NULL);
+ gpio_request(GPIO_FN_VIO0_D14, NULL);
+ gpio_request(GPIO_FN_VIO0_D13, NULL);
+ gpio_request(GPIO_FN_VIO0_D12, NULL);
+ gpio_request(GPIO_FN_VIO0_D11, NULL);
+ gpio_request(GPIO_FN_VIO0_D10, NULL);
+ gpio_request(GPIO_FN_VIO0_D9, NULL);
+ gpio_request(GPIO_FN_VIO0_D8, NULL);
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_FLD, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20);
+
+ /* enable CEU1 */
+ gpio_request(GPIO_FN_VIO1_D7, NULL);
+ gpio_request(GPIO_FN_VIO1_D6, NULL);
+ gpio_request(GPIO_FN_VIO1_D5, NULL);
+ gpio_request(GPIO_FN_VIO1_D4, NULL);
+ gpio_request(GPIO_FN_VIO1_D3, NULL);
+ gpio_request(GPIO_FN_VIO1_D2, NULL);
+ gpio_request(GPIO_FN_VIO1_D1, NULL);
+ gpio_request(GPIO_FN_VIO1_D0, NULL);
+ gpio_request(GPIO_FN_VIO1_FLD, NULL);
+ gpio_request(GPIO_FN_VIO1_HD, NULL);
+ gpio_request(GPIO_FN_VIO1_VD, NULL);
+ gpio_request(GPIO_FN_VIO1_CLK, NULL);
+ platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20);
+
+ /* KEYSC */
+ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+ gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+ gpio_request(GPIO_FN_KEYIN4, NULL);
+ gpio_request(GPIO_FN_KEYIN3, NULL);
+ gpio_request(GPIO_FN_KEYIN2, NULL);
+ gpio_request(GPIO_FN_KEYIN1, NULL);
+ gpio_request(GPIO_FN_KEYIN0, NULL);
+ gpio_request(GPIO_FN_KEYOUT3, NULL);
+ gpio_request(GPIO_FN_KEYOUT2, NULL);
+ gpio_request(GPIO_FN_KEYOUT1, NULL);
+ gpio_request(GPIO_FN_KEYOUT0, NULL);
+
+ if (sw & SW41_B) {
+ /* SVGA */
+ lcdc_info.ch[0].lcd_cfg.xres = 800;
+ lcdc_info.ch[0].lcd_cfg.yres = 600;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 142;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 52;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 24;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 2;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ } else {
+ /* VGA */
+ lcdc_info.ch[0].lcd_cfg.xres = 640;
+ lcdc_info.ch[0].lcd_cfg.yres = 480;
+ lcdc_info.ch[0].lcd_cfg.left_margin = 105;
+ lcdc_info.ch[0].lcd_cfg.right_margin = 50;
+ lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
+ lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
+ lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
+ lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
+ }
+
+ if (sw & SW41_A) {
+ /* Digital monitor */
+ lcdc_info.ch[0].interface_type = RGB18;
+ lcdc_info.ch[0].flags = 0;
+ } else {
+ /* Analog monitor */
+ lcdc_info.ch[0].interface_type = RGB24;
+ lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
+ }
+
+ return platform_add_devices(ms7724se_devices,
+ ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+ .mv_name = "ms7724se",
+ .mv_init_irq = init_se7724_IRQ,
+ .mv_nr_irqs = SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR,
+};
#
obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_PCI) += pci.o
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port)) & 0xff;
ctrl_delay();
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
+++ /dev/null
-/*
- * linux/arch/sh/boards/se/7751/pci.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return 13;
- case 1: return 13; /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <mach-se/mach/se7780.h>
+#define INTC_BASE 0xffd00000
+#define INTC_ICR1 (INTC_BASE+0x1c)
+
/*
* Initialize IRQ setting
*/
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+ /* ICR1: detect low level(for 2ndcut) */
+ ctrl_outl(0xAAAA0000, INTC_ICR1);
+
+ /*
+ * FPGA PCISEL register initialize
+ *
+ * CPU || SLOT1 | SLOT2 | S-ATA | USB
+ * -------------------------------------
+ * INTA || INTA | INTD | -- | INTB
+ * -------------------------------------
+ * INTB || INTB | INTA | -- | INTC
+ * -------------------------------------
+ * INTC || INTC | INTB | INTA | --
+ * -------------------------------------
+ * INTD || INTD | INTC | -- | INTA
+ * -------------------------------------
+ */
+ ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
+ ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
}
obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/
obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE) += 7724/
#define RTC_BUSY 1
#define RTC_STOP 2
-extern spinlock_t rtc_lock;
+static DEFINE_SPINLOCK(sh03_rtc_lock);
unsigned long get_cmos_time(void)
{
unsigned int year, mon, day, hour, min, sec;
- spin_lock(&rtc_lock);
+ spin_lock(&sh03_rtc_lock);
again:
do {
sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
goto again;
}
- spin_unlock(&rtc_lock);
+ spin_unlock(&sh03_rtc_lock);
return mktime(year, mon, day, hour, min, sec);
}
int i;
/* gets recalled with irq locally disabled */
- spin_lock(&rtc_lock);
+ spin_lock(&sh03_rtc_lock);
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
break;
cmos_minutes, real_minutes);
retval = -1;
}
- spin_unlock(&rtc_lock);
+ spin_unlock(&sh03_rtc_lock);
return retval;
}
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else
return (*port2adr(port)) & 0xff;
}
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else
v = (*port2adr(port))&0xff;
ctrl_delay();
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
}
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else
*(port2adr(port)) = value;
ctrl_delay();
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
{
if (PXSEG(port))
return *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
return *(volatile unsigned char *)ETHER_IOMAP(port);
else
if (PXSEG(port))
v = *(volatile unsigned char *)port;
- else if (is_pci_ioaddr(port))
- v = *(volatile unsigned char *)pci_ioaddr(port);
else if (port <= 0x3F1)
v = *(volatile unsigned char *)ETHER_IOMAP(port);
else
{
if (PXSEG(port))
return *(volatile unsigned short *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned short *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
{
if (PXSEG(port))
return *(volatile unsigned long *)port;
- else if (is_pci_ioaddr(port))
- return *(volatile unsigned int *)pci_ioaddr(port);
else if (port >= 0x2000)
return *port2adr(port);
else if (port <= 0x3F1)
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
{
if (PXSEG(port))
*(volatile unsigned char *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned char*)pci_ioaddr(port)) = value;
else if (port <= 0x3F1)
*(volatile unsigned char *)ETHER_IOMAP(port) = value;
else
{
if (PXSEG(port))
*(volatile unsigned short *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned short *)pci_ioaddr(port)) = value;
else if (port >= 0x2000)
*port2adr(port) = value;
else if (port <= 0x3F1)
{
if (PXSEG(port))
*(volatile unsigned long *)port = value;
- else if (is_pci_ioaddr(port))
- *((unsigned long*)pci_ioaddr(port)) = value;
else
maybebadio(port);
}
{
if (PXSEG(port))
return ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port2adr(port)) & 0xff;
}
if (PXSEG(port))
v = ctrl_inb(port);
- else if (is_pci_ioaddr(port))
- v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port2adr(port)) & 0xff;
ctrl_delay();
{
if (PXSEG(port))
return ctrl_inw(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inw(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
{
if (PXSEG(port))
return ctrl_inl(port);
- else if (is_pci_ioaddr(port))
- return ctrl_inl(pci_ioaddr(port));
else if (port >= 0x2000)
return ctrl_inw(port2adr(port));
else
{
if (PXSEG(port))
ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
}
{
if (PXSEG(port))
ctrl_outb(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outw(value, port2adr(port));
ctrl_delay();
{
if (PXSEG(port))
ctrl_outw(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outw(value, pci_ioaddr(port));
else if (port >= 0x2000)
ctrl_outw(value, port2adr(port));
else
{
if (PXSEG(port))
ctrl_outl(value, port);
- else if (is_pci_ioaddr(port))
- ctrl_outl(value, pci_ioaddr(port));
else
maybebadio(port);
}
void __iomem *titan_ioport_map(unsigned long port, unsigned int size)
{
- if (PXSEG(port) || is_pci_memaddr(port))
+ if (PXSEG(port))
return (void __iomem *)port;
- else if (is_pci_ioaddr(port))
- return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port2adr(port);
}
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
- CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
-
targets := zImage vmlinux.srec uImage uImage.srec
subdir- := compressed
$$[$(CONFIG_MEMORY_START)]')
endif
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+ CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
+
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
$(KERNEL_MEMORY) + \
-ifeq ($(CONFIG_SUPERH32),y)
-include ${srctree}/arch/sh/boot/compressed/Makefile_32
-else
-include ${srctree}/arch/sh/boot/compressed/Makefile_64
+#
+# linux/arch/sh/boot/compressed/Makefile
+#
+# create a compressed vmlinux image from the original vmlinux
+#
+
+targets := vmlinux vmlinux.bin vmlinux.bin.gz \
+ head_$(BITS).o misc_$(BITS).o piggy.o
+
+OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc_$(BITS).o $(obj)/cache.o
+
+ifdef CONFIG_SH_STANDARD_BIOS
+OBJECTS += $(obj)/../../kernel/sh_bios.o
endif
+
+#
+# IMAGE_OFFSET is the load offset of the compression loader
+#
+IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_PAGE_OFFSET) + \
+ $(KERNEL_MEMORY) + \
+ $(CONFIG_BOOT_LINK_OFFSET)]')
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ORIG_CFLAGS := $(KBUILD_CFLAGS)
+KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+endif
+
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \
+ -T $(obj)/../../kernel/vmlinux.lds
+
+$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
+ $(call if_changed,ld)
+ @:
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+OBJCOPYFLAGS += -R .empty_zero_page
+
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+ $(call if_changed,as_o_S)
+++ /dev/null
-#
-# linux/arch/sh/boot/compressed/Makefile
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz \
- head_32.o misc_32.o piggy.o
-
-OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o
-
-ifdef CONFIG_SH_STANDARD_BIOS
-OBJECTS += $(obj)/../../kernel/sh_bios.o
-endif
-
-#
-# IMAGE_OFFSET is the load offset of the compression loader
-#
-IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_MEMORY_START) + \
- $(CONFIG_BOOT_LINK_OFFSET)]')
-
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
-
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,as_o_S)
+++ /dev/null
-#
-# arch/sh/boot/compressed/Makefile_64
-#
-# create a compressed vmlinux image from the original vmlinux
-#
-# Copyright (C) 2002 Stuart Menefy
-# Copyright (C) 2004 Paul Mundt
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-targets := vmlinux vmlinux.bin vmlinux.bin.gz \
- head_64.o misc_64.o cache.o piggy.o
-
-OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
- $(obj)/cache.o
-
-#
-# ZIMAGE_OFFSET is the load offset of the compression loader
-# (4M for the kernel plus 64K for this loader)
-#
-ZIMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]')
-
-LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \
- -T $(obj)/../../kernel/vmlinux.lds
-
-$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
- $(call if_changed,ld)
- @:
-
-$(obj)/vmlinux.bin: vmlinux FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-
-OBJCOPYFLAGS += -R .empty_zero_page
-
-$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
- $(call if_changed,as_o_S)
* Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
*/
#include <asm/cache.h>
+#include <asm/tlb.h>
#include <cpu/mmu_context.h>
#include <cpu/registers.h>
#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */
#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */
-#if 1
#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */
-#else
-#define OCCR0_INIT_VAL OCCR0_OFF
-#endif
#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */
.text
+++ /dev/null
-/*
- * ld script to make compressed SuperH/shmedia Linux kernel+decompression
- * bootstrap
- * Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka
- */
-
-
-#ifdef CONFIG_LITTLE_ENDIAN
-/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */
-#define NOP 0x6ff0fff0
-#else
-/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */
-#define NOP 0xf0fff06f
-#endif
-
-OUTPUT_FORMAT("elf32-sh64-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section))
-#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align))
-
-SECTIONS
-{
- _text = .; /* Text and read-only data */
-
- .text : {
- *(.text)
- *(.text64)
- *(.text..SHmedia32)
- *(.fixup)
- *(.gnu.warning)
- } = NOP
- . = ALIGN(4);
- .rodata : { *(.rodata) }
-
- /* There is no 'real' reason for eight byte alignment, four would work
- * as well, but gdb downloads much (*4) faster with this.
- */
- . = ALIGN(8);
- .image : { *(.image) }
- . = ALIGN(4);
- _etext = .; /* End of text section */
-
- .data : /* Data */
- FOLLOWING(.image, 4)
- {
- _data = .;
- *(.data)
- }
- _data_image = LOADADDR(.data);/* Address of data section in ROM */
-
- _edata = .; /* End of data section */
-
- .stack : { stack = .; _stack = .; }
-
- . = ALIGN(4);
- __bss_start = .; /* BSS */
- .bss : {
- *(.bss)
- }
- . = ALIGN(4);
- _end = . ;
-}
Do not change this unless you know what you are doing.
-config HD64461_IOBASE
- hex "HD64461 start address"
- depends on HD64461
- default "0xb0000000"
-
config HD64461_ENABLER
bool "HD64461 PCMCIA enabler"
depends on HD64461
printk(KERN_INFO
"HD64461 configured at 0x%x on irq %d(mapped into %d to %d)\n",
- CONFIG_HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
+ HD64461_IOBASE, CONFIG_HD64461_IRQ, HD64461_IRQBASE,
HD64461_IRQBASE + 15);
/* Should be at processor specific part.. */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:46:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:42:06 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:49:14 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:42:53 2009
#
CONFIG_SUPERH=y
# CONFIG_SUPERH32 is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# System type
#
CONFIG_CPU_SH5=y
-# CONFIG_CPU_SUBTYPE_SH7619 is not set
-# CONFIG_CPU_SUBTYPE_SH7201 is not set
-# CONFIG_CPU_SUBTYPE_SH7203 is not set
-# CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7263 is not set
-# CONFIG_CPU_SUBTYPE_MXG is not set
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-# CONFIG_CPU_SUBTYPE_SH7712 is not set
-# CONFIG_CPU_SUBTYPE_SH7720 is not set
-# CONFIG_CPU_SUBTYPE_SH7721 is not set
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_SH7723 is not set
-# CONFIG_CPU_SUBTYPE_SH7763 is not set
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-# CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH7786 is not set
-# CONFIG_CPU_SUBTYPE_SHX3 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-# CONFIG_CPU_SUBTYPE_SH7722 is not set
-# CONFIG_CPU_SUBTYPE_SH7366 is not set
CONFIG_CPU_SUBTYPE_SH5_101=y
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:51:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:44:27 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
CONFIG_SH_DMA_IRQ_MULTI=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_NR_DMA_CHANNELS_BOOL=y
CONFIG_NR_DMA_CHANNELS=9
# CONFIG_PVR2_DMA is not set
CONFIG_MAPLE=y
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_MAPLE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:54:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:45:04 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# Pseudo filesystems
#
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:54:57 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:45:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_CPU_SUBTYPE_SH7760=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 17:58:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:46:26 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:01:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:47:15 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:02:54 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:47:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_USBVIDEO=m
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:06:51 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:48:54 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:07:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:49:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:11:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:50:51 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:14:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:51:34 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:16:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:52:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:20:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:53:28 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
-CONFIG_SH_PCLK_FREQ=32000000
+CONFIG_SH_PCLK_FREQ=33333333
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:24:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:55:10 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
-CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_PCLK_FREQ=33333333
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:29:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:56:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:30:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:57:06 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# LED drivers
#
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
#
# LED Triggers
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:33:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:58:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=1
CONFIG_SERIAL_SH_SCI_CONSOLE=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:34:12 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:59:01 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=1
CONFIG_SERIAL_SH_SCI_CONSOLE=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:34:43 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 12:59:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:39:37 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:01:02 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
CONFIG_CGROUP_DEVICE=y
+# CONFIG_CPUSETS is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:42:00 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:01:44 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_CPU_SUBTYPE_SH7343=y
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:44:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:02:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:45:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:02:52 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:48:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:03:27 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:51:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:04:19 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:55:10 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:05:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc6
+# Tue May 26 13:18:09 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7724_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_TMU=y
+# CONFIG_SH_TIMER_CMT is not set
+CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_SH_SCI is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+# CONFIG_SOC_CAMERA_MT9M111 is not set
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_VIDEO_SH_MOBILE_CEU=y
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:57:31 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:06:02 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 18:59:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:06:44 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:02:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:07:14 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:04:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:07:56 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:09:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:09:16 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:09:47 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_CMT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_CMT=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:10:57 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:10:12 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
#
# Library routines
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc4
+# Tue May 12 14:48:21 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_TMU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+CONFIG_CPU_SUBTYPE_SH7770=y
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+
+#
+# Memory hotplug is currently incompatible with Software Suspend
+#
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+
+#
+# Cache configuration
+#
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=41666666
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_KEXEC_JUMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_ENTRY_OFFSET=0x00001000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+# CONFIG_PROC_FS is not set
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:12:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:10:53 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 22 19:17:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:11:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:19:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:12:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_SH_STANDARD_BIOS=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:20:54 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:13:12 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:21:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:23:31 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:33 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:24:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:14:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
-CONFIG_PCI_AUTO=y
-CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:30:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 13:17:05 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
CONFIG_CPU_SUBTYPE_SH7366=y
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:33:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Mon Apr 27 14:02:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \
CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \
CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
- CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
+ CPU_SUBTYPE_SH7760
config NR_ONCHIP_DMA_CHANNELS
int
code will not have to flush the CPU's caches. If you have a PCI host
bridge integrated with your SH CPU, refer carefully to the chip specs
to see if you can say 'N' here. Otherwise, leave it as 'Y'.
-
-# This is also board-specific
-config PCI_AUTO
- bool
- depends on PCI
- default y
-
-config PCI_AUTO_UPDATE_RESOURCES
- bool
- depends on PCI_AUTO
- default y if !SH_DREAMCAST
- help
- Selecting this option will cause the PCI auto code to leave your
- BAR values alone. Otherwise they will be updated automatically. If
- for some reason, you have a board that simply refuses to work
- with its resources updated beyond what they are when the device
- is powered up, set this to N. Everyone else will want this as Y.
-
#
# Makefile for the PCI specific kernel interface routines under Linux.
#
-
obj-y += pci.o
-obj-$(CONFIG_PCI_AUTO) += pci-auto.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
-obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o
-obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o
-obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o
-obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o
-obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o
-obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o
-obj-$(CONFIG_SH_TITAN) += ops-titan.o
-obj-$(CONFIG_SH_LANDISK) += ops-landisk.o
-obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o
-obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o
-obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o
-obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o
+obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
+ pci-dreamcast.o
+obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
+obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
+obj-$(CONFIG_SH_SH03) += fixups-sh03.o
+obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
+obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
+obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
+obj-$(CONFIG_SH_TITAN) += fixups-titan.o
+obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
+obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
+obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+#include <cpu/irq.h>
+#include "pci-sh5.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int result = -1;
+
+ /* The complication here is that the PCI IRQ lines from the Cayman's 2
+ 5V slots get into the CPU via a different path from the IRQ lines
+ from the 3 3.3V slots. Thus, we have to detect whether the card's
+ interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+ at the point where we cross from 5V to 3.3V is not the normal case.
+
+ The added complication is that we don't know that the 5V slots are
+ always bus 2, because a card containing a PCI-PCI bridge may be
+ plugged into a 3.3V slot, and this changes the bus numbering.
+
+ Also, the Cayman has an intermediate PCI bus that goes a custom
+ expansion board header (and to the secondary bridge). This bus has
+ never been used in practice.
+
+ The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+ The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of
+ the 1ary bridge.
+ */
+
+ struct slot_pin {
+ int slot;
+ int pin;
+ } path[4];
+ int i=0;
+
+ while (dev->bus->number > 0) {
+
+ slot = path[i].slot = PCI_SLOT(dev->devfn);
+ pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin);
+ dev = dev->bus->self;
+ i++;
+ if (i > 3) panic("PCI path to root bus too long!\n");
+ }
+
+ slot = PCI_SLOT(dev->devfn);
+ /* This is the slot on bus 0 through which the device is eventually
+ reachable. */
+
+ /* Now work back up. */
+ if ((slot < 3) || (i == 0)) {
+ /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+ swizzle now. */
+ result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1;
+ } else {
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ if (slot > 0) {
+ panic("PCI expansion bus device found - not handled!\n");
+ } else {
+ if (i > 0) {
+ /* 5V slots */
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ /* 'pin' was swizzled earlier wrt slot, don't do it again. */
+ result = IRQ_P2INTA + (pin - 1);
+ } else {
+ /* IRQ for 2ary PCI-PCI bridge : unused */
+ result = -1;
+ }
+ }
+ }
+
+ return result;
+}
static void __init gapspci_fixup_resources(struct pci_dev *dev)
{
- struct pci_channel *p = board_pci_channels;
+ struct pci_channel *p = dev->sysdata;
printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
*/
dev->resource[1].start = p->io_resource->start + 0x100;
dev->resource[1].end = dev->resource[1].start + 0x200 - 1;
+
+ /*
+ * This is not a normal BAR, prevent any attempts to move
+ * the BAR, as this will result in a bus lock.
+ */
+ dev->resource[1].flags |= IORESOURCE_PCI_FIXED;
+
/*
* Redirect dma memory allocations to special memory window.
*/
--- /dev/null
+/*
+ * arch/sh/drivers/pci/ops-landisk.c
+ *
+ * PCI initialization for the I-O DATA Device, Inc. LANDISK board
+ *
+ * Copyright (C) 2006 kogiidena
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ /*
+ * slot0: pin1-4 = irq5,6,7,8
+ * slot1: pin1-4 = irq6,7,8,5
+ * slot2: pin1-4 = irq7,8,5,6
+ * slot3: pin1-4 = irq8,5,6,7
+ */
+ int irq = ((slot + pin - 1) & 0x3) + 5;
+
+ if ((slot | (pin - 1)) > 0x3) {
+ printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
+ slot, pin - 1 + 'A');
+ return -1;
+ }
+ return irq;
+}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/fixups-lboxre2.c
- *
- * L-BOX RE2 PCI fixups
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include "pci-sh4.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-int pci_fixup_pcic(void)
-{
- unsigned long bcr1, mcr;
-
- bcr1 = ctrl_inl(SH7751_BCR1);
- bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(bcr1, SH4_PCIBCR1);
-
- /* Enable all interrupts, so we known what to fix */
- pci_write_reg(0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
- pci_write_reg(0xfb900047, SH7751_PCICONF1);
- pci_write_reg(0xab000001, SH7751_PCICONF4);
-
- mcr = ctrl_inl(SH7751_MCR);
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(mcr, SH4_PCIMCR);
-
- pci_write_reg(0x0c000000, SH7751_PCICONF5);
- pci_write_reg(0xd0000000, SH7751_PCICONF6);
- pci_write_reg(0x0c000000, SH4_PCILAR0);
- pci_write_reg(0x00000000, SH4_PCILAR1);
-
- return 0;
-}
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include "pci-sh4.h"
-#include <asm/io.h>
-int pci_fixup_pcic(void)
-{
- pci_write_reg(0x000043ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(0xfbb00047, SH7780_PCICMD);
- pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
- pci_write_reg(0x00011912, SH7780_PCISVID);
- pci_write_reg(0x08000000, SH7780_PCICSCR0);
- pci_write_reg(0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
- pci_write_reg(0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+static char irq_tab[] __initdata = {
+ 65, 66, 67, 68,
+};
-#ifdef CONFIG_32BIT
- pci_write_reg(0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ return irq_tab[slot];
+}
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
- SH7780_PCIIOBR);
- pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR);
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+ pci_write_reg(chan, 0x000043ff, SH4_PCIINTM);
+ pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR);
+ pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0);
+ pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0);
+ pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1);
+ pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1);
return 0;
}
/*
* arch/sh/drivers/pci/fixups-rts7751r2d.c
*
- * RTS7751R2D PCI fixups
+ * RTS7751R2D / LBOXRE2 PCI fixups
*
* Copyright (C) 2003 Lineo uSolutions, Inc.
* Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/pci.h>
+#include <mach/lboxre2.h>
+#include <mach/r2d.h>
#include "pci-sh4.h"
+#include <asm/machtypes.h>
#define PCIMCR_MRSET_OFF 0xBFFFFFFF
#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-int pci_fixup_pcic(void)
+static u8 rts7751r2d_irq_tab[] __initdata = {
+ IRQ_PCI_INTA,
+ IRQ_PCI_INTB,
+ IRQ_PCI_INTC,
+ IRQ_PCI_INTD,
+};
+
+static char lboxre2_irq_tab[] __initdata = {
+ IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ if (mach_is_lboxre2())
+ return lboxre2_irq_tab[slot];
+ else
+ return rts7751r2d_irq_tab[slot];
+}
+
+int pci_fixup_pcic(struct pci_channel *chan)
{
unsigned long bcr1, mcr;
bcr1 = ctrl_inl(SH7751_BCR1);
bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- pci_write_reg(bcr1, SH4_PCIBCR1);
+ pci_write_reg(chan, bcr1, SH4_PCIBCR1);
/* Enable all interrupts, so we known what to fix */
- pci_write_reg(0x0000c3ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
+ pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM);
+ pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
- pci_write_reg(0xfb900047, SH7751_PCICONF1);
- pci_write_reg(0xab000001, SH7751_PCICONF4);
+ pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1);
+ pci_write_reg(chan, 0xab000001, SH7751_PCICONF4);
mcr = ctrl_inl(SH7751_MCR);
mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- pci_write_reg(mcr, SH4_PCIMCR);
+ pci_write_reg(chan, mcr, SH4_PCIMCR);
- pci_write_reg(0x0c000000, SH7751_PCICONF5);
- pci_write_reg(0xd0000000, SH7751_PCICONF6);
- pci_write_reg(0x0c000000, SH4_PCILAR0);
- pci_write_reg(0x00000000, SH4_PCILAR1);
+ pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5);
+ pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6);
+ pci_write_reg(chan, 0x0c000000, SH4_PCILAR0);
+ pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
return 0;
}
*
* Copyright (C) 2003 Lineo uSolutions, Inc.
* Copyright (C) 2004 - 2006 Paul Mundt
+ * Copyright (C) 2006 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include "pci-sh4.h"
-#include <asm/io.h>
-int pci_fixup_pcic(void)
+/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
+static char sdk7780_irq_tab[4][16] __initdata = {
+ /* INTA */
+ { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTB */
+ { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTC */
+ { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+ /* INTD */
+ { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ return sdk7780_irq_tab[pin-1][slot];
+}
+int pci_fixup_pcic(struct pci_channel *chan)
{
- ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
/* Enable all interrupts, so we know what to fix */
- pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
- pci_write_reg(0x0000380F, SH7780_PCIAINTM);
+ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR);
/* Set up standard PCI config registers */
- pci_write_reg(0xFB00, SH7780_PCISTATUS);
- pci_write_reg(0x0047, SH7780_PCICMD);
- pci_write_reg(0x00, SH7780_PCIPIF);
- pci_write_reg(0x00, SH7780_PCISUB);
- pci_write_reg(0x06, SH7780_PCIBCC);
- pci_write_reg(0x1912, SH7780_PCISVID);
- pci_write_reg(0x0001, SH7780_PCISID);
-
- pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
- pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
-
- pci_write_reg(0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(0x00000000, SH7780_PCILAR1);
- pci_write_reg(0x00000000, SH7780_PCILSR1);
-
- pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
- pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
+ pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */
+ pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */
+ pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */
- /* Set IOBR for window containing area specified in pci.h */
- pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
- pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
+ pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1);
+ pci_write_reg(chan, 0x00000000, SH4_PCILAR1);
+ pci_write_reg(chan, 0x00000000, SH4_PCILSR1);
- pci_write_reg(0xA5000C01, SH7780_PCICR);
+ pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR);
+ pci_write_reg(chan, 0xA5000C01, SH4_PCICR);
return 0;
}
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(u8 slot, u8 pin)
+{
+ switch (slot) {
+ case 0: return 13;
+ case 1: return 13; /* AMD Ethernet controller */
+ case 2: return -1;
+ case 3: return -1;
+ case 4: return -1;
+ default:
+ printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
+ return -1;
+ }
+}
+
+#define PCIMCR_MRSET_OFF 0xBFFFFFFF
+#define PCIMCR_RFSH_OFF 0xFFFFFFFB
+
+/*
+ * Only long word accesses of the PCIC's internal local registers and the
+ * configuration registers from the CPU is supported.
+ */
+#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
+#define PCIC_READ(x) readl(PCI_REG(x))
+
+/*
+ * Description: This function sets up and initializes the pcic, sets
+ * up the BARS, maps the DRAM into the address space etc, etc.
+ */
+int pci_fixup_pcic(struct pci_channel *chan)
+{
+ unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
+ unsigned short bcr2;
+
+ /*
+ * Initialize the slave bus controller on the pcic. The values used
+ * here should not be hardcoded, but they should be taken from the bsc
+ * on the processor, to make this function as generic as possible.
+ * (i.e. Another sbc may usr different SDRAM timing settings -- in order
+ * for the pcic to work, its settings need to be exactly the same.)
+ */
+ bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
+ bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
+ wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
+ wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
+ wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
+ mcr = (*(volatile unsigned long*)(SH7751_MCR));
+
+ bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
+ (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
+
+ bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
+ PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
+ PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
+ PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
+ PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
+ PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
+ mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
+ PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
+
+
+ /* Enable all interrupts, so we know what to fix */
+ PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
+ PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
+
+ /* Set up standard PCI config registers */
+ PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
+ PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
+ PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
+ PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
+ PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
+ PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
+ PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
+ PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
+ PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
+ PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
+
+ /* Now turn it on... */
+ PCIC_WRITE(SH7751_PCICR, 0xa5000001);
+
+ /*
+ * Set PCIMBR and PCIIOBR here, assuming a single window
+ * (16M MEM, 256K IO) is enough. If a larger space is
+ * needed, the readx/writex and inx/outx functions will
+ * have to do more (e.g. setting registers for each call).
+ */
+
+ /*
+ * Set the MBR so PCI address is one-to-one with window,
+ * meaning all calls go straight through... use BUG_ON to
+ * catch erroneous assumption.
+ */
+ BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE);
+
+ PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start);
+
+ /* Set IOBR for window containing area specified in pci.h */
+ PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK));
+
+ /* All done, may as well say so... */
+ printk("SH7751 PCI: Finished initialization of the PCI controller\n");
+
+ return 1;
+}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/fixups-se7780.c
- *
- * HITACHI UL Solution Engine 7780 PCI fixups
- *
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-#include <asm/io.h>
-
-int pci_fixup_pcic(void)
-{
- ctrl_outl(0x00000001, SH7780_PCI_VCR2);
-
- /* Enable all interrupts, so we know what to fix */
- pci_write_reg(0x0000C3FF, SH7780_PCIIMR);
- pci_write_reg(0x0000380F, SH7780_PCIAINTM);
-
- /* Set up standard PCI config registers */
- ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS));
- ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD));
- ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF));
- ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB));
- ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC));
- ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID));
- ctrl_outw(0x0001, PCI_REG(SH7780_PCISID));
-
- pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */
- pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */
- pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */
-
- pci_write_reg(0x00000000, SH7780_PCIMBAR1);
- pci_write_reg(0x00000000, SH7780_PCILAR1);
- pci_write_reg(0x00000000, SH7780_PCILSR1);
-
- pci_write_reg(0xAB000801, SH7780_PCIIBAR);
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use ifdef to
- * catch erroneous assumption.
- */
- pci_write_reg(0xFD000000 , SH7780_PCIMBR0);
- pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */
-
- /* Set IOBR for window containing area specified in pci.h */
- pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR);
- pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR);
-
- pci_write_reg(0xA5000C01, SH7780_PCICR);
-
- return 0;
-}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/fixups-sh7785lcr.c
- *
- * R0P7785LC0011RL PCI fixups
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * Based on arch/sh/drivers/pci/fixups-r7780rp.c
- * Copyright (C) 2003 Lineo uSolutions, Inc.
- * Copyright (C) 2004 - 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-int pci_fixup_pcic(void)
-{
- pci_write_reg(0x000043ff, SH4_PCIINTM);
- pci_write_reg(0x0000380f, SH4_PCIAINTM);
-
- pci_write_reg(0xfbb00047, SH7780_PCICMD);
- pci_write_reg(0x00000000, SH7780_PCIIBAR);
-
- pci_write_reg(0x00011912, SH7780_PCISVID);
- pci_write_reg(0x08000000, SH7780_PCICSCR0);
- pci_write_reg(0x0000001b, SH7780_PCICSAR0);
- pci_write_reg(0xfd000000, SH7780_PCICSCR1);
- pci_write_reg(0x0000000f, SH7780_PCICSAR1);
-
- pci_write_reg(0xfd000000, SH7780_PCIMBR0);
- pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
-
-#ifdef CONFIG_32BIT
- pci_write_reg(0xc0000000, SH7780_PCIMBR2);
- pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
-#endif
-
- /* Set IOBR for windows containing area specified in pci.h */
- pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
- SH7780_PCIIOBR);
- pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
-
- return 0;
-}
--- /dev/null
+/*
+ * arch/sh/drivers/pci/ops-snapgear.c
+ *
+ * Author: David McCullough <davidm@snapgear.com>
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the SnapGear boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ int irq = -1;
+
+ switch (slot) {
+ case 8: /* the PCI bridge */ break;
+ case 11: irq = 8; break; /* USB */
+ case 12: irq = 11; break; /* PCMCIA */
+ case 13: irq = 5; break; /* eth0 */
+ case 14: irq = 8; break; /* eth1 */
+ case 15: irq = 11; break; /* safenet (unused) */
+ }
+
+ printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
+ slot, pin - 1 + 'A', irq);
+
+ return irq;
+}
--- /dev/null
+/*
+ * arch/sh/drivers/pci/ops-titan.c
+ *
+ * Ported to new API by Paul Mundt <lethal@linux-sh.org>
+ *
+ * Modified from ops-snapgear.c written by David McCullough
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * PCI initialization for the Titan boards
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <mach/titan.h>
+#include "pci-sh4.h"
+
+static char titan_irq_tab[] __initdata = {
+ TITAN_IRQ_WAN,
+ TITAN_IRQ_LAN,
+ TITAN_IRQ_MPCIA,
+ TITAN_IRQ_MPCIB,
+ TITAN_IRQ_USB,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+ int irq = titan_irq_tab[slot];
+
+ printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
+ slot, pin - 1 + 'A', irq);
+
+ return irq;
+}
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <cpu/irq.h>
-#include "pci-sh5.h"
-
-int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int result = -1;
-
- /* The complication here is that the PCI IRQ lines from the Cayman's 2
- 5V slots get into the CPU via a different path from the IRQ lines
- from the 3 3.3V slots. Thus, we have to detect whether the card's
- interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
- at the point where we cross from 5V to 3.3V is not the normal case.
-
- The added complication is that we don't know that the 5V slots are
- always bus 2, because a card containing a PCI-PCI bridge may be
- plugged into a 3.3V slot, and this changes the bus numbering.
-
- Also, the Cayman has an intermediate PCI bus that goes a custom
- expansion board header (and to the secondary bridge). This bus has
- never been used in practice.
-
- The 1ary onboard PCI-PCI bridge is device 3 on bus 0
- The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of
- the 1ary bridge.
- */
-
- struct slot_pin {
- int slot;
- int pin;
- } path[4];
- int i=0;
-
- while (dev->bus->number > 0) {
-
- slot = path[i].slot = PCI_SLOT(dev->devfn);
- pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin);
- dev = dev->bus->self;
- i++;
- if (i > 3) panic("PCI path to root bus too long!\n");
- }
-
- slot = PCI_SLOT(dev->devfn);
- /* This is the slot on bus 0 through which the device is eventually
- reachable. */
-
- /* Now work back up. */
- if ((slot < 3) || (i == 0)) {
- /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
- swizzle now. */
- result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1;
- } else {
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- if (slot > 0) {
- panic("PCI expansion bus device found - not handled!\n");
- } else {
- if (i > 0) {
- /* 5V slots */
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- /* 'pin' was swizzled earlier wrt slot, don't do it again. */
- result = IRQ_P2INTA + (pin - 1);
- } else {
- /* IRQ for 2ary PCI-PCI bridge : unused */
- result = -1;
- }
- }
- }
-
- return result;
-}
-
-struct pci_channel board_pci_channels[] = {
- { &sh5_pci_ops, NULL, NULL, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-int __init pcibios_init_platform(void)
-{
- return sh5pci_init(__pa(memory_start),
- __pa(memory_end) - __pa(memory_start));
-}
/*
- * arch/sh/drivers/pci/ops-dreamcast.c
- *
* PCI operations for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
* Copyright (C) 2002, 2003 Paul Mundt
*
- * This file originally bore the message (with enclosed-$):
- * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
- * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
- *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/module.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <mach/pci.h>
-static struct resource gapspci_io_resource = {
- .name = "GAPSPCI IO",
- .start = GAPSPCI_BBA_CONFIG,
- .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource gapspci_mem_resource = {
- .name = "GAPSPCI mem",
- .start = GAPSPCI_DMA_BASE,
- .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct pci_ops gapspci_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &gapspci_pci_ops, &gapspci_io_resource,
- &gapspci_mem_resource, 0, 1 },
- { 0, }
-};
-EXPORT_SYMBOL(board_pci_channels);
-
/*
* The !gapspci_config_access case really shouldn't happen, ever, unless
* someone implicitly messes around with the last devfn value.. otherwise we
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
- case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
- case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
- }
+ case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
+ case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
+ case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+ }
return PCIBIOS_SUCCESSFUL;
}
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
- case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
- case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
- case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+ case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
-static struct pci_ops gapspci_pci_ops = {
+struct pci_ops gapspci_pci_ops = {
.read = gapspci_read,
.write = gapspci_write,
};
-
-/*
- * gapspci init
- */
-
-int __init gapspci_init(void)
-{
- char idbuf[16];
- int i;
-
- /*
- * FIXME: All of this wants documenting to some degree,
- * even some basic register definitions would be nice.
- *
- * I haven't seen anything this ugly since.. maple.
- */
-
- for (i=0; i<16; i++)
- idbuf[i] = inb(GAPSPCI_REGS+i);
-
- if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
- return -ENODEV;
-
- outl(0x5a14a501, GAPSPCI_REGS+0x18);
-
- for (i=0; i<1000000; i++)
- ;
-
- if (inl(GAPSPCI_REGS+0x18) != 1)
- return -EINVAL;
-
- outl(0x01000000, GAPSPCI_REGS+0x20);
- outl(0x01000000, GAPSPCI_REGS+0x24);
-
- outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
- outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
-
- outl(1, GAPSPCI_REGS+0x14);
- outl(1, GAPSPCI_REGS+0x34);
-
- /* Setting Broadband Adapter */
- outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
- outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
- outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
- outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
- outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
- outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
- outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
-
- return 0;
-}
-
-/* Haven't done anything here as yet */
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/ops-landisk.c
- *
- * PCI initialization for the I-O DATA Device, Inc. LANDISK board
- *
- * Copyright (C) 2006 kogiidena
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff},
- {NULL, NULL, NULL, 0, 0},
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = (64 << 20), /* 64MB */
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- /*
- * slot0: pin1-4 = irq5,6,7,8
- * slot1: pin1-4 = irq6,7,8,5
- * slot2: pin1-4 = irq7,8,5,6
- * slot3: pin1-4 = irq8,5,6,7
- */
- int irq = ((slot + pin - 1) & 0x3) + 5;
-
- if ((slot | (pin - 1)) > 0x3) {
- printk("PCI: Bad IRQ mapping request for slot %d pin %c\n",
- slot, pin - 1 + 'A');
- return -1;
- }
- return irq;
-}
+++ /dev/null
-/*
- * linux/arch/sh/drivers/pci/ops-lboxre2.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * PCI initialization for the NTT COMWARE L-BOX RE2
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/lboxre2.h>
-#include "pci-sh4.h"
-
-static char lboxre2_irq_tab[] __initdata = {
- IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return lboxre2_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE ,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
- .window1 = {
- .base = 0x00000000, /* Unused */
- .size = 0x00000000, /* Unused */
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
+++ /dev/null
-/*
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/highlander.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
- 65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return irq_tab[slot];
-}
-
-static struct resource sh7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .window1 = {
- .base = SH7780_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7780_pcic_init(&sh7780_pci_map);
-}
+++ /dev/null
-/*
- * linux/arch/sh/drivers/pci/ops-rts7751r2d.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas SH7751R RTS7751R2D board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/r2d.h>
-#include "pci-sh4.h"
-
-static u8 rts7751r2d_irq_tab[] __initdata = {
- IRQ_PCI_INTA,
- IRQ_PCI_INTB,
- IRQ_PCI_INTC,
- IRQ_PCI_INTD,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return rts7751r2d_irq_tab[slot];
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = 0x4000,
- .end = SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
-
- .window1 = {
- .base = 0x00000000, /* Unused */
- .size = 0x00000000, /* Unused */
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- __set_io_port_base(SH7751_PCI_IO_BASE);
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
+++ /dev/null
-/*
- * linux/arch/sh/drivers/pci/ops-sdk7780.c
- *
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * PCI initialization for the SDK7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach/sdk7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char sdk7780_irq_tab[4][16] __initdata = {
- /* INTA */
- { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTC */
- { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTD */
- { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return sdk7780_irq_tab[pin-1][slot];
-}
-
-static struct resource sdk7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sdk7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sdk7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
- .window1 = {
- .base = SH7780_CS3_BASE_ADDR,
- .size = 0x04000000,
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n");
- return sh7780_pcic_init(&sdk7780_pci_map);
-}
+++ /dev/null
-/*
- * linux/arch/sh/drivers/pci/ops-se7780.c
- *
- * Copyright (C) 2006 Nobuhiro Iwamatsu
- *
- * PCI initialization for the Hitachi UL Solution Engine 7780SE03
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <mach-se/mach/se7780.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-
-/*
- * IDSEL = AD16 PCI slot
- * IDSEL = AD17 PCI slot
- * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A)
- * IDSEL = AD19 USB Host Controller (NEC uPD7210100A)
- */
-
-/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */
-static char se7780_irq_tab[4][16] __initdata = {
- /* INTA */
- { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTB */
- { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTC */
- { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
- /* INTD */
- { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 },
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return se7780_irq_tab[pin-1][slot];
-}
-
-static struct resource se7780_io_resource = {
- .name = "SH7780_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource se7780_mem_resource = {
- .name = "SH7780_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops se7780_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map se7780_pci_map = {
- .window0 = {
- .base = SH7780_CS2_BASE_ADDR,
- .size = 0x04000000,
- },
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- printk("SH7780 PCI: Finished initialization of the PCI controller\n");
-
- /*
- * FPGA PCISEL register initialize
- *
- * CPU || SLOT1 | SLOT2 | S-ATA | USB
- * -------------------------------------
- * INTA || INTA | INTD | -- | INTB
- * -------------------------------------
- * INTB || INTB | INTA | -- | INTC
- * -------------------------------------
- * INTC || INTC | INTB | INTA | --
- * -------------------------------------
- * INTD || INTD | INTC | -- | INTA
- * -------------------------------------
- */
- ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
- ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
-
- return sh7780_pcic_init(&se7780_pci_map);
-}
+++ /dev/null
-/*
- * linux/arch/sh/drivers/pci/ops-sh03.c
- *
- * PCI initialization for the Interface CTP/PCI-SH03 board
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include "pci-sh7751.h"
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- __set_io_port_base(SH7751_PCI_IO_BASE);
- return 1;
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH03 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH03 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh4_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
/*
* Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780).
*
- * Copyright (C) 2002 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License v2. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/pci.h>
+#include <linux/io.h>
#include <asm/addrspace.h>
-#include <asm/io.h>
#include "pci-sh4.h"
/*
* Direct access to PCI hardware...
*/
#define CONFIG_CMD(bus, devfn, where) \
- P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3))
+ (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3))
static DEFINE_SPINLOCK(sh4_pci_lock);
static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
+ struct pci_channel *chan = bus->sysdata;
unsigned long flags;
u32 data;
* so we must do byte alignment by hand
*/
spin_lock_irqsave(&sh4_pci_lock, flags);
- pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(SH4_PCIPDR);
+ pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(chan, SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
+ struct pci_channel *chan = bus->sysdata;
unsigned long flags;
int shift;
u32 data;
spin_lock_irqsave(&sh4_pci_lock, flags);
- pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
- data = pci_read_reg(SH4_PCIPDR);
+ pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
+ data = pci_read_reg(chan, SH4_PCIPDR);
spin_unlock_irqrestore(&sh4_pci_lock, flags);
switch (size) {
return PCIBIOS_FUNC_NOT_SUPPORTED;
}
- pci_write_reg(data, SH4_PCIPDR);
+ pci_write_reg(chan, data, SH4_PCIPDR);
return PCIBIOS_SUCCESSFUL;
}
* Not really related to pci_ops, but it's common and not worth shoving
* somewhere else for now..
*/
-static unsigned int pci_probe = PCI_PROBE_CONF1;
-
-int __init sh4_pci_check_direct(void)
+int __init sh4_pci_check_direct(struct pci_channel *chan)
{
/*
* Check if configuration works.
*/
- if (pci_probe & PCI_PROBE_CONF1) {
- unsigned int tmp = pci_read_reg(SH4_PCIPAR);
-
- pci_write_reg(P1SEG, SH4_PCIPAR);
+ unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR);
- if (pci_read_reg(SH4_PCIPAR) == P1SEG) {
- pci_write_reg(tmp, SH4_PCIPAR);
- printk(KERN_INFO "PCI: Using configuration type 1\n");
- request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
+ pci_write_reg(chan, P1SEG, SH4_PCIPAR);
- return 0;
- }
-
- pci_write_reg(tmp, SH4_PCIPAR);
+ if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
+ pci_write_reg(chan, tmp, SH4_PCIPAR);
+ printk(KERN_INFO "PCI: Using configuration type 1\n");
+ request_region(chan->reg_base + SH4_PCIPAR, 8,
+ "PCI conf1");
+ return 0;
}
- pr_debug("PCI: pci_check_direct failed\n");
- return -EINVAL;
-}
+ pci_write_reg(chan, tmp, SH4_PCIPAR);
-/* Handle generic fixups */
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
+ printk(KERN_ERR "PCI: %s failed\n", __func__);
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i = 0; i < 4; i++) {
- struct resource *r = &d->resource[i];
-
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- if (!strcmp(str, "off")) {
- pci_probe = 0;
- return NULL;
- }
-
- return str;
+ return -EINVAL;
}
-int __attribute__((weak)) pci_fixup_pcic(void)
+int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan)
{
/* Nothing to do. */
return 0;
#include <asm/io.h>
#include "pci-sh5.h"
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- printk("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
+++ /dev/null
-/*
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Renesas R0P7785LC0011RL board
- * Based on arch/sh/drivers/pci/ops-r7780rp.c
- *
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-static char irq_tab[] __initdata = {
- 65, 66, 67, 68,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- return irq_tab[slot];
-}
-
-static struct resource sh7785_io_resource = {
- .name = "SH7785_IO",
- .start = SH7780_PCI_IO_BASE,
- .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7785_mem_resource = {
- .name = "SH7785_mem",
- .start = SH7780_PCI_MEMORY_BASE,
- .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7785_pci_map = {
- .window0 = {
-#if defined(CONFIG_32BIT)
- .base = SH7780_32BIT_DDR_BASE_ADDR,
- .size = 0x40000000,
-#else
- .base = SH7780_CS0_BASE_ADDR,
- .size = 0x20000000,
-#endif
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7780_pcic_init(&sh7785_pci_map);
-}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/ops-snapgear.c
- *
- * Author: David McCullough <davidm@snapgear.com>
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the SnapGear boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include "pci-sh4.h"
-
-#define SNAPGEAR_PCI_IO 0x4000
-#define SNAPGEAR_PCI_MEM 0xfd000000
-
-/* PCI: default LOCAL memory window sizes (seen from PCI bus) */
-#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB
-#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SNAPGEAR_PCI_IO,
- .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */
- .flags = IORESOURCE_IO,
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SNAPGEAR_PCI_MEM,
- .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */
- .flags = IORESOURCE_MEM,
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { 0, }
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SNAPGEAR_LSR0_SIZE,
- },
-
- .window1 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SNAPGEAR_LSR1_SIZE,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-/*
- * Initialize the SnapGear PCI interface
- * Setup hardware to be Central Funtion
- * Copy the BSR regs to the PCI interface
- * Setup PCI windows into local RAM
- */
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = -1;
-
- switch (slot) {
- case 8: /* the PCI bridge */ break;
- case 11: irq = 8; break; /* USB */
- case 12: irq = 11; break; /* PCMCIA */
- case 13: irq = 5; break; /* eth0 */
- case 14: irq = 8; break; /* eth1 */
- case 15: irq = 11; break; /* safenet (unused) */
- }
-
- printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
-
-void __init pcibios_fixup(void)
-{
- /* Nothing to fixup .. */
-}
+++ /dev/null
-/*
- * arch/sh/drivers/pci/ops-titan.c
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>
- *
- * Modified from ops-snapgear.c written by David McCullough
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Titan boards
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <mach/titan.h>
-#include "pci-sh4.h"
-
-static char titan_irq_tab[] __initdata = {
- TITAN_IRQ_WAN,
- TITAN_IRQ_LAN,
- TITAN_IRQ_MPCIA,
- TITAN_IRQ_MPCIB,
- TITAN_IRQ_USB,
-};
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
- int irq = titan_irq_tab[slot];
-
- printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
- slot, pin - 1 + 'A', irq);
-
- return irq;
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751_mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-struct pci_channel board_pci_channels[] = {
- { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-EXPORT_SYMBOL(board_pci_channels);
-
-static struct sh4_pci_address_map sh7751_pci_map = {
- .window0 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */
- },
-
- .window1 = {
- .base = SH7751_CS2_BASE_ADDR,
- .size = SH7751_MEM_REGION_SIZE*2,
- },
-
- .flags = SH4_PCIC_NO_RESET,
-};
-
-int __init pcibios_init_platform(void)
-{
- return sh7751_pcic_init(&sh7751_pci_map);
-}
+++ /dev/null
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * Copyright 2000, 2001 MontaVista Software Inc.
- * Copyright 2001 Bradley D. LaRonde <brad@ltc.com>
- * Copyright 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * Modified for MIPS by Jun Sun, jsun@mvista.com
- *
- * . Simplify the interface between pci_auto and the rest: a single function.
- * . Assign resources from low address to upper address.
- * . change most int to u32.
- *
- * Further modified to include it as mips generic code, ppopov@mvista.com.
- *
- * 2001-10-26 Bradley D. LaRonde <brad@ltc.com>
- * - Add a top_bus argument to the "early config" functions so that
- * they can set a fake parent bus pointer to convince the underlying
- * pci ops to use type 1 configuration for sub busses.
- * - Set bridge base and limit registers correctly.
- * - Align io and memory base properly before and after bridge setup.
- * - Don't fall through to pci_setup_bars for bridge.
- * - Reformat the debug output to look more like lspci's output.
- *
- * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org
- *
- * 2003-08-05 Paul Mundt <lethal@linux-sh.org>
- * - Don't update the BAR values on systems that already have valid addresses
- * and don't want these updated for whatever reason, by way of a new config
- * option check. However, we still read in the old BAR values so that they
- * can still be reported through the debug output.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#define DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
- int top_bus, int busnr, int devfn)
-{
- static struct pci_dev dev;
- static struct pci_bus bus;
-
- dev.bus = &bus;
- dev.sysdata = hose;
- dev.devfn = devfn;
- bus.number = busnr;
- bus.ops = hose->pci_ops;
-
- if(busnr != top_bus)
- /* Fake a parent bus structure. */
- bus.parent = &bus;
- else
- bus.parent = NULL;
-
- return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type) \
-static int early_##rw##_config_##size(struct pci_channel *hose, \
- int top_bus, int bus, int devfn, int offset, type value) \
-{ \
- return pci_##rw##_config_##size( \
- fake_pci_dev(hose, top_bus, bus, devfn), \
- offset, value); \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-static struct resource *io_resource_inuse;
-static struct resource *mem_resource_inuse;
-
-static u32 pciauto_lower_iospc;
-static u32 pciauto_upper_iospc;
-
-static u32 pciauto_lower_memspc;
-static u32 pciauto_upper_memspc;
-
-static void __init
-pciauto_setup_bars(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int bar_limit)
-{
- u32 bar_response, bar_size, bar_value;
- u32 bar, addr_mask, bar_nr = 0;
- u32 * upper_limit;
- u32 * lower_limit;
- int found_mem64 = 0;
-
- for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
- u32 bar_addr;
-
- /* Read the old BAR value */
- early_read_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- &bar_addr);
-
- /* Tickle the BAR and get the response */
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- 0xffffffff);
-
- early_read_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- &bar_response);
-
- /*
- * Write the old BAR value back out, only update the BAR
- * if we implicitly want resources to be updated, which
- * is done by the generic code further down. -- PFM.
- */
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- bar_addr);
-
- /* If BAR is not implemented go to the next BAR */
- if (!bar_response)
- continue;
-
- /*
- * Workaround for a BAR that doesn't use its upper word,
- * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457).
- * bdl <brad@ltc.com>
- */
- if (!(bar_response & 0xffff0000))
- bar_response |= 0xffff0000;
-
-retry:
- /* Check the BAR type and set our address mask */
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- addr_mask = PCI_BASE_ADDRESS_IO_MASK;
- upper_limit = &pciauto_upper_iospc;
- lower_limit = &pciauto_lower_iospc;
- DBG(" I/O");
- } else {
- if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
- PCI_BASE_ADDRESS_MEM_TYPE_64)
- found_mem64 = 1;
-
- addr_mask = PCI_BASE_ADDRESS_MEM_MASK;
- upper_limit = &pciauto_upper_memspc;
- lower_limit = &pciauto_lower_memspc;
- DBG(" Mem");
- }
-
-
- /* Calculate requested size */
- bar_size = ~(bar_response & addr_mask) + 1;
-
- /* Allocate a base address */
- bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
-
- if ((bar_value + bar_size) > *upper_limit) {
- if (bar_response & PCI_BASE_ADDRESS_SPACE) {
- if (io_resource_inuse->child) {
- io_resource_inuse =
- io_resource_inuse->child;
- pciauto_lower_iospc =
- io_resource_inuse->start;
- pciauto_upper_iospc =
- io_resource_inuse->end + 1;
- goto retry;
- }
-
- } else {
- if (mem_resource_inuse->child) {
- mem_resource_inuse =
- mem_resource_inuse->child;
- pciauto_lower_memspc =
- mem_resource_inuse->start;
- pciauto_upper_memspc =
- mem_resource_inuse->end + 1;
- goto retry;
- }
- }
- DBG(" unavailable -- skipping, value %x size %x\n",
- bar_value, bar_size);
- continue;
- }
-
- if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) {
- DBG(" unavailable -- skipping, value %x size %x\n",
- bar_value, bar_size);
- continue;
- }
-
-#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES
- /* Write it out and update our limit */
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- bar, bar_value);
-#endif
-
- *lower_limit = bar_value + bar_size;
-
- /*
- * If we are a 64-bit decoder then increment to the
- * upper 32 bits of the bar and force it to locate
- * in the lower 4GB of memory.
- */
- if (found_mem64) {
- bar += 4;
- early_write_config_dword(hose, top_bus,
- current_bus,
- pci_devfn,
- bar,
- 0x00000000);
- }
-
- DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size);
-
- bar_nr++;
- }
-
-}
-
-static void __init
-pciauto_prescan_setup_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_PRIMARY_BUS, current_bus);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SECONDARY_BUS, sub_bus + 1);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, 0xff);
-
- /* Align memory and I/O to 1MB and 4KB boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
- & ~(0x100000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
- & ~(0x1000 - 1);
-
- /* Set base (lower limit) of address range behind bridge. */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_MEMORY_BASE, pciauto_lower_memspc >> 16);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16);
-
- /* We don't support prefetchable memory for now, so disable */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_PREF_MEMORY_BASE, 0);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_PREF_MEMORY_LIMIT, 0);
-}
-
-static void __init
-pciauto_postscan_setup_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- u32 temp;
-
- /*
- * [jsun] we always bump up baselines a little, so that if there
- * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
- * spaces.
- */
- pciauto_lower_memspc += 1;
- pciauto_lower_iospc += 1;
-
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, sub_bus);
-
- /* Set upper limit of address range behind bridge. */
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8);
- early_write_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16);
-
- /* Align memory and I/O to 1MB and 4KB boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1))
- & ~(0x100000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1))
- & ~(0x1000 - 1);
-
- /* Enable memory and I/O accesses, enable bus master */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &temp);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY
- | PCI_COMMAND_MASTER);
-}
-
-static void __init
-pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- /* Configure bus number registers */
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_PRIMARY_BUS, current_bus);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SECONDARY_BUS, sub_bus + 1);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, 0xff);
-
- /* Align memory and I/O to 4KB and 4 byte boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
- & ~(0x1000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
- & ~(0x4 - 1);
-
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_IO_BASE_0, pciauto_lower_iospc);
-}
-
-static void __init
-pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose,
- int top_bus,
- int current_bus,
- int pci_devfn,
- int sub_bus)
-{
- u32 temp;
-
- /*
- * [jsun] we always bump up baselines a little, so that if there
- * nothing behind P2P bridge, we don't wind up overlapping IO/MEM
- * spaces.
- */
- pciauto_lower_memspc += 1;
- pciauto_lower_iospc += 1;
-
- /*
- * Configure subordinate bus number. The PCI subsystem
- * bus scan will renumber buses (reserving three additional
- * for this PCI<->CardBus bridge for the case where a CardBus
- * adapter contains a P2P or CB2CB bridge.
- */
-
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_SUBORDINATE_BUS, sub_bus);
-
- /*
- * Reserve an additional 4MB for mem space and 16KB for
- * I/O space. This should cover any additional space
- * requirement of unusual CardBus devices with
- * additional bridges that can consume more address space.
- *
- * Although pcmcia-cs currently will reprogram bridge
- * windows, the goal is to add an option to leave them
- * alone and use the bridge window ranges as the regions
- * that are searched for free resources upon hot-insertion
- * of a device. This will allow a PCI<->CardBus bridge
- * configured by this routine to happily live behind a
- * P2P bridge in a system.
- */
- /* Align memory and I/O to 4KB and 4 byte boundaries. */
- pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1))
- & ~(0x1000 - 1);
- pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1))
- & ~(0x4 - 1);
- /* Set up memory and I/O filter limits, assume 32-bit I/O space */
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1);
-
- /* Enable memory and I/O accesses, enable bus master */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &temp);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
-}
-
-#define PCIAUTO_IDE_MODE_MASK 0x05
-
-static int __init
-pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus)
-{
- int sub_bus;
- u32 pci_devfn, pci_class, cmdstat, found_multi=0;
- unsigned short vid, did;
- unsigned char header_type;
- int devfn_start = 0;
- int devfn_stop = 0xff;
-
- sub_bus = current_bus;
-
- if (hose->first_devfn)
- devfn_start = hose->first_devfn;
- if (hose->last_devfn)
- devfn_stop = hose->last_devfn;
-
- for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-
- if (PCI_FUNC(pci_devfn) && !found_multi)
- continue;
-
- early_read_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_VENDOR_ID, &vid);
-
- if (vid == 0xffff) continue;
-
- early_read_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_HEADER_TYPE, &header_type);
-
- if (!PCI_FUNC(pci_devfn))
- found_multi = header_type & 0x80;
-
- early_read_config_word(hose, top_bus, current_bus, pci_devfn,
- PCI_DEVICE_ID, &did);
-
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_CLASS_REVISION, &pci_class);
-
- DBG("%.2x:%.2x.%x Class %.4x: %.4x:%.4x",
- current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn),
- pci_class >> 16, vid, did);
- if (pci_class & 0xff)
- DBG(" (rev %.2x)", pci_class & 0xff);
- DBG("\n");
-
- if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) {
- DBG(" Bridge: primary=%.2x, secondary=%.2x\n",
- current_bus, sub_bus + 1);
- pciauto_prescan_setup_bridge(hose, top_bus, current_bus,
- pci_devfn, sub_bus);
- DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
- sub_bus + 1,
- pciauto_lower_iospc, pciauto_lower_memspc);
- sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
- DBG("Back to bus %.2x\n", current_bus);
- pciauto_postscan_setup_bridge(hose, top_bus, current_bus,
- pci_devfn, sub_bus);
- continue;
- } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
- DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n",
- current_bus, sub_bus + 1);
- DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
- /* Place CardBus Socket/ExCA registers */
- pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0);
-
- pciauto_prescan_setup_cardbus_bridge(hose, top_bus,
- current_bus, pci_devfn, sub_bus);
-
- DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n",
- sub_bus + 1,
- pciauto_lower_iospc, pciauto_lower_memspc);
- sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1);
- DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus);
- pciauto_postscan_setup_cardbus_bridge(hose, top_bus,
- current_bus, pci_devfn, sub_bus);
- continue;
- } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-
- unsigned char prg_iface;
-
- early_read_config_byte(hose, top_bus, current_bus,
- pci_devfn, PCI_CLASS_PROG, &prg_iface);
- if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
- DBG("Skipping legacy mode IDE controller\n");
- continue;
- }
- }
-
- /*
- * Found a peripheral, enable some standard
- * settings
- */
- early_read_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, &cmdstat);
- early_write_config_dword(hose, top_bus, current_bus, pci_devfn,
- PCI_COMMAND, cmdstat | PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
- early_write_config_byte(hose, top_bus, current_bus, pci_devfn,
- PCI_LATENCY_TIMER, 0x80);
-
- /* Allocate PCI I/O and/or memory space */
- pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5);
- }
- return sub_bus;
-}
-
-int __init
-pciauto_assign_resources(int busno, struct pci_channel *hose)
-{
- /* setup resource limits */
- io_resource_inuse = hose->io_resource;
- mem_resource_inuse = hose->mem_resource;
-
- pciauto_lower_iospc = io_resource_inuse->start;
- pciauto_upper_iospc = io_resource_inuse->end + 1;
- pciauto_lower_memspc = mem_resource_inuse->start;
- pciauto_upper_memspc = mem_resource_inuse->end + 1;
- DBG("Autoconfig PCI channel 0x%p\n", hose);
- DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n",
- busno, pciauto_lower_iospc, pciauto_upper_iospc,
- pciauto_lower_memspc, pciauto_upper_memspc);
-
- return pciauto_bus_scan(hose, busno, busno);
-}
--- /dev/null
+/*
+ * PCI support for the Sega Dreamcast
+ *
+ * Copyright (C) 2001, 2002 M. R. Brown
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file originally bore the message (with enclosed-$):
+ * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
+ * Dreamcast PCI: Supports SEGA Broadband Adaptor only.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/pci.h>
+
+static struct resource gapspci_io_resource = {
+ .name = "GAPSPCI IO",
+ .start = GAPSPCI_BBA_CONFIG,
+ .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource gapspci_mem_resource = {
+ .name = "GAPSPCI mem",
+ .start = GAPSPCI_DMA_BASE,
+ .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct pci_channel dreamcast_pci_controller = {
+ .pci_ops = &gapspci_pci_ops,
+ .io_resource = &gapspci_io_resource,
+ .io_offset = 0x00000000,
+ .mem_resource = &gapspci_mem_resource,
+ .mem_offset = 0x00000000,
+};
+
+/*
+ * gapspci init
+ */
+
+static int __init gapspci_init(void)
+{
+ char idbuf[16];
+ int i;
+
+ /*
+ * FIXME: All of this wants documenting to some degree,
+ * even some basic register definitions would be nice.
+ *
+ * I haven't seen anything this ugly since.. maple.
+ */
+
+ for (i=0; i<16; i++)
+ idbuf[i] = inb(GAPSPCI_REGS+i);
+
+ if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
+ return -ENODEV;
+
+ outl(0x5a14a501, GAPSPCI_REGS+0x18);
+
+ for (i=0; i<1000000; i++)
+ cpu_relax();
+
+ if (inl(GAPSPCI_REGS+0x18) != 1)
+ return -EINVAL;
+
+ outl(0x01000000, GAPSPCI_REGS+0x20);
+ outl(0x01000000, GAPSPCI_REGS+0x24);
+
+ outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+ outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+
+ outl(1, GAPSPCI_REGS+0x14);
+ outl(1, GAPSPCI_REGS+0x34);
+
+ /* Setting Broadband Adapter */
+ outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+ outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+ outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+ outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+ outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+ outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+ outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+
+ register_pci_controller(&dreamcast_pci_controller);
+
+ return 0;
+}
+arch_initcall(gapspci_init);
#define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */
#define SH4_PCIPDR 0x220 /* Port IO Data Register */
-/* Flags */
-#define SH4_PCIC_NO_RESET 0x0001
-
/* arch/sh/kernel/drivers/pci/ops-sh4.c */
extern struct pci_ops sh4_pci_ops;
-int sh4_pci_check_direct(void);
-int pci_fixup_pcic(void);
+int sh4_pci_check_direct(struct pci_channel *chan);
+int pci_fixup_pcic(struct pci_channel *chan);
struct sh4_pci_address_space {
unsigned long base;
struct sh4_pci_address_map {
struct sh4_pci_address_space window0;
struct sh4_pci_address_space window1;
- unsigned long flags;
};
-static inline void pci_write_reg(unsigned long val, unsigned long reg)
+static inline void pci_write_reg(struct pci_channel *chan,
+ unsigned long val, unsigned long reg)
{
- ctrl_outl(val, PCI_REG(reg));
+ ctrl_outl(val, chan->reg_base + reg);
}
-static inline unsigned long pci_read_reg(unsigned long reg)
+static inline unsigned long pci_read_reg(struct pci_channel *chan,
+ unsigned long reg)
{
- return ctrl_inl(PCI_REG(reg));
+ return ctrl_inl(chan->reg_base + reg);
}
+
#endif /* __PCI_SH4_H */
return IRQ_NONE;
}
-int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
+static struct resource sh5_io_resource = { /* place holder */ };
+static struct resource sh5_mem_resource = { /* place holder */ };
+
+static struct pci_channel sh5pci_controller = {
+ .pci_ops = &sh5_pci_ops,
+ .mem_resource = &sh5_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh5_io_resource,
+ .io_offset = 0x00000000,
+};
+
+static int __init sh5pci_init(void)
{
+ unsigned long memStart = __pa(memory_start);
+ unsigned long memSize = __pa(memory_end) - memStart;
u32 lsr0;
u32 uval;
return -EINVAL;
}
- pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+ pcicr_virt = (unsigned long)ioremap_nocache(SH5PCI_ICR_BASE, 1024);
if (!pcicr_virt) {
panic("Unable to remap PCICR\n");
}
- PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+ PCI_IO_AREA = (unsigned long)ioremap_nocache(SH5PCI_IO_BASE, 0x10000);
if (!PCI_IO_AREA) {
panic("Unable to remap PCIIO\n");
}
SH5PCI_WRITE(AINTM, ~0);
SH5PCI_WRITE(PINTM, ~0);
- return 0;
-}
+ sh5_io_resource.start = PCI_IO_AREA;
+ sh5_io_resource.end = PCI_IO_AREA + 0x10000;
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
- int i;
-
- if (dev) {
- for (i= 0; i < 3; i++) {
- bus->resource[i] =
- &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->name = bus->name;
- }
- bus->resource[0]->flags |= IORESOURCE_IO;
- bus->resource[1]->flags |= IORESOURCE_MEM;
-
- /* For now, propagate host limits to the bus;
- * we'll adjust them later. */
- bus->resource[0]->end = 64*1024 - 1 ;
- bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
- bus->resource[0]->start = PCIBIOS_MIN_IO;
- bus->resource[1]->start = PCIBIOS_MIN_MEM;
-
- /* Turn off downstream PF memory address range by default */
- bus->resource[2]->start = 1024*1024;
- bus->resource[2]->end = bus->resource[2]->start - 1;
- }
+ sh5_mem_resource.start = memStart;
+ sh5_mem_resource.end = memStart + memSize;
+
+ register_pci_controller(&sh5pci_controller);
+
+ return 0;
}
+arch_initcall(sh5pci_init);
extern struct pci_ops sh5_pci_ops;
-/* arch/sh/drivers/pci/pci-sh5.c */
-int sh5pci_init(unsigned long memStart, unsigned long memSize);
-
#endif /* __PCI_SH5_H */
/*
- * Low-Level PCI Support for the SH7751
+ * Low-Level PCI Support for the SH7751
*
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
+ * Copyright (C) 2003 - 2009 Paul Mundt
+ * Copyright (C) 2001 Dustin McIntire
*
- * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- * With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
+ * With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#undef DEBUG
-
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/io.h>
#include "pci-sh4.h"
#include <asm/addrspace.h>
-#include <asm/io.h>
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
-static int __init sh7751_pci_init(void)
+static int __init __area_sdram_check(struct pci_channel *chan,
+ unsigned int area)
{
- unsigned int id;
- int ret;
-
- pr_debug("PCI: Starting intialization.\n");
+ unsigned long word;
- /* check for SH7751/SH7751R hardware */
- id = pci_read_reg(SH7751_PCICONF0);
- if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
- id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
- pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
- return -ENODEV;
- }
-
- if ((ret = sh4_pci_check_direct()) != 0)
- return ret;
-
- return pcibios_init_platform();
-}
-subsys_initcall(sh7751_pci_init);
-
-static int __init __area_sdram_check(unsigned int area)
-{
- u32 word;
-
- word = ctrl_inl(SH7751_BCR1);
+ word = __raw_readl(SH7751_BCR1);
/* check BCR for SDRAM in area */
if (((word >> area) & 1) == 0) {
- printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
+ printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
area, word);
return 0;
}
- pci_write_reg(word, SH4_PCIBCR1);
+ pci_write_reg(chan, word, SH4_PCIBCR1);
- word = (u16)ctrl_inw(SH7751_BCR2);
+ word = __raw_readw(SH7751_BCR2);
/* check BCR2 for 32bit SDRAM interface*/
if (((word >> (area << 1)) & 0x3) != 0x3) {
- printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
+ printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
area, word);
return 0;
}
- pci_write_reg(word, SH4_PCIBCR2);
+ pci_write_reg(chan, word, SH4_PCIBCR2);
return 1;
}
-int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
+static struct resource sh7751_io_resource = {
+ .name = "SH7751_IO",
+ .start = SH7751_PCI_IO_BASE,
+ .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7751_mem_resource = {
+ .name = "SH7751_mem",
+ .start = SH7751_PCI_MEMORY_BASE,
+ .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_channel sh7751_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .mem_resource = &sh7751_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh7751_io_resource,
+ .io_offset = 0x00000000,
+ .io_map_base = SH7751_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7751_pci_map = {
+ .window0 = {
+ .base = SH7751_CS3_BASE_ADDR,
+ .size = 0x04000000,
+ },
+};
+
+static int __init sh7751_pci_init(void)
{
- u32 reg;
- u32 word;
+ struct pci_channel *chan = &sh7751_pci_controller;
+ unsigned int id;
+ u32 word, reg;
+ int ret;
+
+ printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+ chan->reg_base = 0xfe200000;
+
+ /* check for SH7751/SH7751R hardware */
+ id = pci_read_reg(chan, SH7751_PCICONF0);
+ if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
+ id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
+ pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
+ return -ENODEV;
+ }
+
+ if ((ret = sh4_pci_check_direct(chan)) != 0)
+ return ret;
/* Set the BCR's to enable PCI access */
reg = ctrl_inl(SH7751_BCR1);
ctrl_outl(reg, SH7751_BCR1);
/* Turn the clocks back on (not done in reset)*/
- pci_write_reg(0, SH4_PCICLKR);
+ pci_write_reg(chan, 0, SH4_PCICLKR);
/* Clear Powerdown IRQ's (not done in reset) */
word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
- pci_write_reg(word, SH4_PCIPINT);
-
- /*
- * This code is unused for some boards as it is done in the
- * bootloader and doing it here means the MAC addresses loaded
- * by the bootloader get lost.
- */
- if (!(map->flags & SH4_PCIC_NO_RESET)) {
- /* toggle PCI reset pin */
- word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
- pci_write_reg(word, SH4_PCICR);
- /* Wait for a long time... not 1 sec. but long enough */
- mdelay(100);
- word = SH4_PCICR_PREFIX;
- pci_write_reg(word, SH4_PCICR);
- }
+ pci_write_reg(chan, word, SH4_PCIPINT);
/* set the command/status bits to:
* Wait Cycle Control + Parity Enable + Bus Master +
*/
word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
- pci_write_reg(word, SH7751_PCICONF1);
+ pci_write_reg(chan, word, SH7751_PCICONF1);
/* define this host as the host bridge */
word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(word, SH7751_PCICONF2);
+ pci_write_reg(chan, word, SH7751_PCICONF2);
/* Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
- * Window0 = map->window0.size @ non-cached area base = SDRAM
- * Window1 = map->window1.size @ cached area base = SDRAM
*/
- word = map->window0.size - 1;
- pci_write_reg(word, SH4_PCILSR0);
- word = map->window1.size - 1;
- pci_write_reg(word, SH4_PCILSR1);
+ word = sh7751_pci_map.window0.size - 1;
+ pci_write_reg(chan, word, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
- word = P2SEGADDR(map->window0.base);
- pci_write_reg(word, SH4_PCILAR0);
- pci_write_reg(word, SH7751_PCICONF5);
- /* Set the values on window 1 PCI config registers */
- word = PHYSADDR(map->window1.base);
- pci_write_reg(word, SH4_PCILAR1);
- pci_write_reg(word, SH7751_PCICONF6);
+ word = P2SEGADDR(sh7751_pci_map.window0.base);
+ pci_write_reg(chan, word, SH4_PCILAR0);
+ pci_write_reg(chan, word, SH7751_PCICONF5);
/* Set the local 16MB PCI memory space window to
* the lowest PCI mapped address
*/
- word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK;
+ word = chan->mem_resource->start & SH4_PCIMBR_MASK;
pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
- pci_write_reg(word , SH4_PCIMBR);
-
- /* Map IO space into PCI IO window
- * The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
- * PCI IO window base address
- */
- pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
- PCIBIOS_MIN_IO, (64 << 10),
- SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ pci_write_reg(chan, word , SH4_PCIMBR);
/* Make sure the MSB's of IO window are set to access PCI space
* correctly */
- word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;
+ word = chan->io_resource->start & SH4_PCIIOBR_MASK;
pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
- pci_write_reg(word, SH4_PCIIOBR);
+ pci_write_reg(chan, word, SH4_PCIIOBR);
/* Set PCI WCRx, BCRx's, copy from BSC locations */
/* check BCR for SDRAM in specified area */
- switch (map->window0.base) {
- case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break;
- case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break;
- case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break;
- case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break;
- case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break;
- case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break;
- case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break;
+ switch (sh7751_pci_map.window0.base) {
+ case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
+ case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
+ case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
+ case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
+ case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
+ case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
+ case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
}
if (!word)
- return 0;
+ return -1;
/* configure the wait control registers */
word = ctrl_inl(SH7751_WCR1);
- pci_write_reg(word, SH4_PCIWCR1);
+ pci_write_reg(chan, word, SH4_PCIWCR1);
word = ctrl_inl(SH7751_WCR2);
- pci_write_reg(word, SH4_PCIWCR2);
+ pci_write_reg(chan, word, SH4_PCIWCR2);
word = ctrl_inl(SH7751_WCR3);
- pci_write_reg(word, SH4_PCIWCR3);
+ pci_write_reg(chan, word, SH4_PCIWCR3);
word = ctrl_inl(SH7751_MCR);
- pci_write_reg(word, SH4_PCIMCR);
+ pci_write_reg(chan, word, SH4_PCIMCR);
/* NOTE: I'm ignoring the PCI error IRQs for now..
* TODO: add support for the internal error interrupts and
* DMA interrupts...
*/
- pci_fixup_pcic();
+ pci_fixup_pcic(chan);
/* SH7751 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
- pci_write_reg(word, SH4_PCICR);
+ pci_write_reg(chan, word, SH4_PCICR);
- return 1;
+ register_pci_controller(chan);
+
+ return 0;
}
+arch_initcall(sh7751_pci_init);
#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
-#define PCI_REG(n) (SH7751_PCIREG_BASE+ n)
#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
#define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
#define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */
#define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */
#define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */
-#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
+#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */
#define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
#define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
#define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
#define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
#define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */
#define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
+ #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */
#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */
#define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */
#define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */
#define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */
- #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
+ #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */
/* PCICONF7 - PCICONF10 are undefined */
#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */
#define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */
#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)
#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7751.c */
-int sh7751_pcic_init(struct sh4_pci_address_map *map);
-
#endif /* _PCI_SH7751_H_ */
/*
- * Low-Level PCI Support for the SH7780
+ * Low-Level PCI Support for the SH7780
*
- * Dustin McIntire (dustin@sensoria.com)
- * Derived from arch/i386/kernel/pci-*.c which bore the message:
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
- *
- * Ported to the new API by Paul Mundt <lethal@linux-sh.org>
- * With cleanup by Paul van Gool <pvangool@mimotech.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
+ * Copyright (C) 2005 - 2009 Paul Mundt
*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-#undef DEBUG
-
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include "pci-sh4.h"
-#define INTC_BASE 0xffd00000
-#define INTC_ICR0 (INTC_BASE+0x0)
-#define INTC_ICR1 (INTC_BASE+0x1c)
-#define INTC_INTPRI (INTC_BASE+0x10)
-#define INTC_INTREQ (INTC_BASE+0x24)
-#define INTC_INTMSK0 (INTC_BASE+0x44)
-#define INTC_INTMSK1 (INTC_BASE+0x48)
-#define INTC_INTMSK2 (INTC_BASE+0x40080)
-#define INTC_INTMSKCLR0 (INTC_BASE+0x64)
-#define INTC_INTMSKCLR1 (INTC_BASE+0x68)
-#define INTC_INTMSKCLR2 (INTC_BASE+0x40084)
-#define INTC_INT2MSKR (INTC_BASE+0x40038)
-#define INTC_INT2MSKCR (INTC_BASE+0x4003c)
+static struct resource sh7785_io_resource = {
+ .name = "SH7785_IO",
+ .start = SH7780_PCI_IO_BASE,
+ .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+ .name = "SH7785_mem",
+ .start = SH7780_PCI_MEMORY_BASE,
+ .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_channel sh7780_pci_controller = {
+ .pci_ops = &sh4_pci_ops,
+ .mem_resource = &sh7785_mem_resource,
+ .mem_offset = 0x00000000,
+ .io_resource = &sh7785_io_resource,
+ .io_offset = 0x00000000,
+ .io_map_base = SH7780_PCI_IO_BASE,
+};
+
+static struct sh4_pci_address_map sh7780_pci_map = {
+ .window0 = {
+#if defined(CONFIG_32BIT)
+ .base = SH7780_32BIT_DDR_BASE_ADDR,
+ .size = 0x40000000,
+#else
+ .base = SH7780_CS0_BASE_ADDR,
+ .size = 0x20000000,
+#endif
+ },
+};
-/*
- * Initialization. Try all known PCI access methods. Note that we support
- * using both PCI BIOS and direct access: in such cases, we use I/O ports
- * to access config space.
- *
- * Note that the platform specific initialization (BSC registers, and memory
- * space mapping) will be called via the platform defined function
- * pcibios_init_platform().
- */
static int __init sh7780_pci_init(void)
{
+ struct pci_channel *chan = &sh7780_pci_controller;
unsigned int id;
- int ret, match = 0;
-
- pr_debug("PCI: Starting intialization.\n");
-
- ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
-
- /* check for SH7780/SH7780R hardware */
- id = pci_read_reg(SH7780_PCIVID);
- if ((id & 0xffff) == SH7780_VENDOR_ID) {
- switch ((id >> 16) & 0xffff) {
- case SH7763_DEVICE_ID:
- case SH7780_DEVICE_ID:
- case SH7781_DEVICE_ID:
- case SH7785_DEVICE_ID:
- match = 1;
- break;
- }
- }
+ const char *type = NULL;
+ int ret;
+ u32 word;
- if (unlikely(!match)) {
- printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id);
+ printk(KERN_NOTICE "PCI: Starting intialization.\n");
+
+ chan->reg_base = 0xfe040000;
+
+ /* Enable CPU access to the PCIC registers. */
+ __raw_writel(PCIECR_ENBL, PCIECR);
+
+ id = __raw_readw(chan->reg_base + SH7780_PCIVID);
+ if (id != SH7780_VENDOR_ID) {
+ printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
return -ENODEV;
}
- /* Setup the INTC */
- if (mach_is_7780se()) {
- /* ICR0: IRL=use separately */
- ctrl_outl(0x00C00020, INTC_ICR0);
- /* ICR1: detect low level(for 2ndcut) */
- ctrl_outl(0xAAAA0000, INTC_ICR1);
- /* INTPRI: priority=3(all) */
- ctrl_outl(0x33333333, INTC_INTPRI);
+ id = __raw_readw(chan->reg_base + SH7780_PCIDID);
+ type = (id == SH7763_DEVICE_ID) ? "SH7763" :
+ (id == SH7780_DEVICE_ID) ? "SH7780" :
+ (id == SH7781_DEVICE_ID) ? "SH7781" :
+ (id == SH7785_DEVICE_ID) ? "SH7785" :
+ NULL;
+ if (unlikely(!type)) {
+ printk(KERN_ERR "PCI: Found an unsupported Renesas host "
+ "controller, device id 0x%04x.\n", id);
+ return -EINVAL;
}
- if ((ret = sh4_pci_check_direct()) != 0)
- return ret;
+ printk(KERN_NOTICE "PCI: Found a Renesas %s host "
+ "controller, revision %d.\n", type,
+ __raw_readb(chan->reg_base + SH7780_PCIRID));
- return pcibios_init_platform();
-}
-core_initcall(sh7780_pci_init);
-
-int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
-{
- u32 word;
+ if ((ret = sh4_pci_check_direct(chan)) != 0)
+ return ret;
/*
- * This code is unused for some boards as it is done in the
- * bootloader and doing it here means the MAC addresses loaded
- * by the bootloader get lost.
- */
- if (!(map->flags & SH4_PCIC_NO_RESET)) {
- /* toggle PCI reset pin */
- word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
- pci_write_reg(word, SH4_PCICR);
- /* Wait for a long time... not 1 sec. but long enough */
- mdelay(100);
- word = SH4_PCICR_PREFIX;
- pci_write_reg(word, SH4_PCICR);
- }
-
- /* set the command/status bits to:
- * Wait Cycle Control + Parity Enable + Bus Master +
- * Mem space enable
+ * Set the class and sub-class codes.
*/
- pci_write_reg(0x00000046, SH7780_PCICMD);
-
- /* define this host as the host bridge */
- word = PCI_BASE_CLASS_BRIDGE << 24;
- pci_write_reg(word, SH7780_PCIRID);
+ __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
+ chan->reg_base + SH7780_PCIBCC);
+ __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
+ chan->reg_base + SH7780_PCISUB);
- /* Set IO and Mem windows to local address
+ /*
+ * Set IO and Mem windows to local address
* Make PCI and local address the same for easy 1 to 1 mapping
*/
- pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0);
- pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1);
+ pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
/* Set the values on window 0 PCI config registers */
- pci_write_reg(map->window0.base, SH4_PCILAR0);
- pci_write_reg(map->window0.base, SH7780_PCIMBAR0);
- /* Set the values on window 1 PCI config registers */
- pci_write_reg(map->window1.base, SH4_PCILAR1);
- pci_write_reg(map->window1.base, SH7780_PCIMBAR1);
-
- /* Map IO space into PCI IO window
- * The IO window is 64K-PCIBIOS_MIN_IO in size
- * IO addresses will be translated to the
- * PCI IO window base address
- */
- pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n",
- PCIBIOS_MIN_IO, (64 << 10),
- SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO);
+ pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
+ pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
- /* NOTE: I'm ignoring the PCI error IRQs for now..
- * TODO: add support for the internal error interrupts and
- * DMA interrupts...
- */
+ pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
+
+ /* Set up standard PCI config registers */
+ __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
+ __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
+ __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
+ __raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
+
+ __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
/* Apply any last-minute PCIC fixups */
- pci_fixup_pcic();
+ pci_fixup_pcic(chan);
+
+ pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
+ pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+ pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
+ pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+ /* Set IOBR for windows containing area specified in pci.h */
+ pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
+ SH7780_PCIIOBR);
+ pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
+ SH7780_PCIIOBMR);
/* SH7780 init done, set central function init complete */
/* use round robin mode to stop a device starving/overruning */
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
- pci_write_reg(word, SH4_PCICR);
+ pci_write_reg(chan, word, SH4_PCICR);
+
+ register_pci_controller(chan);
- return 1;
+ return 0;
}
+arch_initcall(sh7780_pci_init);
#define SH7785_DEVICE_ID 0x0007
/* SH7780 Control Registers */
-#define SH7780_PCI_VCR0 0xFE000000
-#define SH7780_PCI_VCR1 0xFE000004
-#define SH7780_PCI_VCR2 0xFE000008
+#define PCIECR 0xFE000008
+#define PCIECR_ENBL 0x01
/* SH7780 Specific Values */
#define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */
#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
-#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
/* SH7780 PCI Config Registers */
#define SH7780_PCIVID 0x000 /* Vendor ID */
#define SH7780_PCIPMCSR_BSE 0x046
#define SH7780_PCICDD 0x047
-#define SH7780_PCICR 0x100 /* PCI Control Register */
-#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */
-#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */
-#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */
-#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */
#define SH7780_PCIIR 0x114 /* PCI Interrupt Register */
#define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */
#define SH7780_PCIAIR 0x11C /* Error Address Register */
#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
-struct sh4_pci_address_map;
-
-/* arch/sh/drivers/pci/pci-sh7780.c */
-int sh7780_pcic_init(struct sh4_pci_address_map *map);
-
#endif /* _PCI_SH7780_H_ */
/*
- * arch/sh/drivers/pci/pci.c
+ * New-style PCI core.
*
- * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org>
- * Copyright (c) 2004 - 2006 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (c) 2004 - 2009 Paul Mundt
+ * Copyright (c) 2002 M. R. Brown
*
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * These routines require the following board-specific routines:
- * void pcibios_fixup_irqs();
- *
- * See include/asm-sh/pci.h for more information.
+ * Modelled after arch/mips/pci/pci.c:
+ * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/types.h>
#include <linux/dma-debug.h>
-#include <asm/io.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
-static int __init pcibios_init(void)
+unsigned long PCIBIOS_MIN_IO = 0x0000;
+unsigned long PCIBIOS_MIN_MEM = 0;
+
+/*
+ * The PCI controller list.
+ */
+static struct pci_channel *hose_head, **hose_tail = &hose_head;
+
+static int pci_initialized;
+
+static void __devinit pcibios_scanbus(struct pci_channel *hose)
{
- struct pci_channel *p;
+ static int next_busno;
struct pci_bus *bus;
- int busno;
-#ifdef CONFIG_PCI_AUTO
- /* assign resources */
- busno = 0;
- for (p = board_pci_channels; p->pci_ops != NULL; p++)
- busno = pciauto_assign_resources(busno, p) + 1;
-#endif
+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
+ if (bus) {
+ next_busno = bus->subordinate + 1;
+ /* Don't allow 8-bit bus number overflow inside the hose -
+ reserve some space for bridges. */
+ if (next_busno > 224)
+ next_busno = 0;
+
+ pci_bus_size_bridges(bus);
+ pci_bus_assign_resources(bus);
+ pci_enable_bridges(bus);
+ }
+}
+
+static DEFINE_MUTEX(pci_scan_mutex);
- /* scan the buses */
- busno = 0;
- for (p = board_pci_channels; p->pci_ops != NULL; p++) {
- bus = pci_scan_bus(busno, p->pci_ops, p);
- busno = bus->subordinate + 1;
+void __devinit register_pci_controller(struct pci_channel *hose)
+{
+ if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+ goto out;
+ if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+ release_resource(hose->mem_resource);
+ goto out;
}
+ *hose_tail = hose;
+ hose_tail = &hose->next;
+
+ /*
+ * Do not panic here but later - this might hapen before console init.
+ */
+ if (!hose->io_map_base) {
+ printk(KERN_WARNING
+ "registering PCI controller with io_map_base unset\n");
+ }
+
+ /*
+ * Scan the bus if it is register after the PCI subsystem
+ * initialization.
+ */
+ if (pci_initialized) {
+ mutex_lock(&pci_scan_mutex);
+ pcibios_scanbus(hose);
+ mutex_unlock(&pci_scan_mutex);
+ }
+
+ return;
+
+out:
+ printk(KERN_WARNING
+ "Skipping PCI bus scan due to resource conflict\n");
+}
+
+static int __init pcibios_init(void)
+{
+ struct pci_channel *hose;
+
+ /* Scan all of the recorded PCI controllers. */
+ for (hose = hose_head; hose; hose = hose->next)
+ pcibios_scanbus(hose);
+
pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
dma_debug_add_bus(&pci_bus_type);
+ pci_initialized = 1;
+
return 0;
}
subsys_initcall(pcibios_init);
+static void pcibios_fixup_device_resources(struct pci_dev *dev,
+ struct pci_bus *bus)
+{
+ /* Update device resources. */
+ struct pci_channel *hose = bus->sysdata;
+ unsigned long offset = 0;
+ int i;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ if (!dev->resource[i].start)
+ continue;
+ if (dev->resource[i].flags & IORESOURCE_PCI_FIXED)
+ continue;
+ if (dev->resource[i].flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (dev->resource[i].flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ dev->resource[i].start += offset;
+ dev->resource[i].end += offset;
+ }
+}
+
/*
* Called after each bus is probed, but before its children
* are examined.
*/
-void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
- pci_read_bridge_bases(bus);
-}
+ struct pci_dev *dev = bus->self;
+ struct list_head *ln;
+ struct pci_channel *chan = bus->sysdata;
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
- __attribute__ ((weak));
+ if (!dev) {
+ bus->resource[0] = chan->io_resource;
+ bus->resource[1] = chan->mem_resource;
+ }
+
+ for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
+ dev = pci_dev_b(ln);
+
+ if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+ pcibios_fixup_device_resources(dev, bus);
+ }
+}
/*
* We need to avoid collisions with `mirrored' VGA ports
void pcibios_align_resource(void *data, struct resource *res,
resource_size_t size, resource_size_t align)
{
+ struct pci_dev *dev = data;
+ struct pci_channel *chan = dev->sysdata;
+ resource_size_t start = res->start;
+
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
+ if (start < PCIBIOS_MIN_IO + chan->io_resource->start)
+ start = PCIBIOS_MIN_IO + chan->io_resource->start;
+ /*
+ * Put everything into 0x00-0xff region modulo 0x400.
+ */
if (start & 0x300) {
start = (start + 0x3ff) & ~0x3ff;
res->start = start;
}
+ } else if (res->flags & IORESOURCE_MEM) {
+ if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start)
+ start = PCIBIOS_MIN_MEM + chan->mem_resource->start;
}
+
+ res->start = start;
+}
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ struct pci_channel *hose = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (res->flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ region->start = res->start - offset;
+ region->end = res->end - offset;
+}
+
+void __devinit
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ struct pci_channel *hose = dev->sysdata;
+ unsigned long offset = 0;
+
+ if (res->flags & IORESOURCE_IO)
+ offset = hose->io_offset;
+ else if (res->flags & IORESOURCE_MEM)
+ offset = hose->mem_offset;
+
+ res->start = region->start + offset;
+ res->end = region->end + offset;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
pci_read_config_word(dev, PCI_COMMAND, &cmd);
old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
- if (!(mask & (1 << idx)))
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
continue;
+
r = &dev->resource[idx];
+ if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
+ continue;
+ if ((idx == PCI_ROM_RESOURCE) &&
+ (!(r->flags & IORESOURCE_ROM_ENABLE)))
+ continue;
if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because "
- "of resource collisions\n", pci_name(dev));
+ printk(KERN_ERR "PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
return -EINVAL;
}
if (r->flags & IORESOURCE_IO)
if (r->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
if (cmd != old_cmd) {
- printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n",
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
pci_name(dev), old_cmd, cmd);
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
}
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ /*
+ * I/O space can be accessed via normal processor loads and stores on
+ * this platform but for now we elect not to do this and portable
+ * drivers should not do this anyway.
+ */
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ /*
+ * Ignore write-combine; for now only return uncached mappings.
+ */
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot);
+}
+
+static void __iomem *ioport_map_pci(struct pci_dev *dev,
+ unsigned long port, unsigned int nr)
+{
+ struct pci_channel *chan = dev->sysdata;
+
+ if (!chan->io_map_base)
+ chan->io_map_base = generic_io_base;
+
+ return (void __iomem *)(chan->io_map_base + port);
+}
+
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
resource_size_t start = pci_resource_start(dev, bar);
if (maxlen && len > maxlen)
len = maxlen;
+ if (flags & IORESOURCE_IO)
+ return ioport_map_pci(dev, start, len);
+
/*
* Presently the IORESOURCE_MEM case is a bit special, most
* SH7751 style PCI controllers have PCI memory at a fixed
- * location in the address space where no remapping is desired
- * (typically at 0xfd000000, but is_pci_memaddr() will know
- * best). With the IORESOURCE_MEM case more care has to be taken
+ * location in the address space where no remapping is desired.
+ * With the IORESOURCE_MEM case more care has to be taken
* to inhibit page table mapping for legacy cores, but this is
* punted off to __ioremap().
* -- PFM.
*/
- if (flags & IORESOURCE_IO)
- return ioport_map(start, len);
- if (flags & IORESOURCE_MEM)
- return ioremap(start, len);
+ if (flags & IORESOURCE_MEM) {
+ if (flags & IORESOURCE_CACHEABLE)
+ return ioremap(start, len);
+
+ return ioremap_nocache(start, len);
+ }
return NULL;
}
iounmap(addr);
}
EXPORT_SYMBOL(pci_iounmap);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+EXPORT_SYMBOL(PCIBIOS_MIN_IO);
+EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
+#endif
#define flush_cache_vmap(start, end) flush_cache_all()
#define flush_cache_vunmap(start, end) flush_cache_all()
-#define HAVE_ARCH_UNMAPPED_AREA
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHEFLUSH_H */
#ifndef __ASM_SH_CLOCK_H
#define __ASM_SH_CLOCK_H
-#include <linux/kref.h>
#include <linux/list.h>
#include <linux/seq_file.h>
+#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
struct clk_ops {
void (*init)(struct clk *clk);
- void (*enable)(struct clk *clk);
+ int (*enable)(struct clk *clk);
void (*disable)(struct clk *clk);
- void (*recalc)(struct clk *clk);
+ unsigned long (*recalc)(struct clk *clk);
int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
int (*set_parent)(struct clk *clk, struct clk *parent);
long (*round_rate)(struct clk *clk, unsigned long rate);
struct clk *parent;
struct clk_ops *ops;
- struct kref kref;
+ struct list_head children;
+ struct list_head sibling; /* node for children */
+
+ int usecount;
unsigned long rate;
unsigned long flags;
+
+ void __iomem *enable_reg;
+ unsigned int enable_bit;
+
unsigned long arch_flags;
+ void *priv;
+ struct dentry *dentry;
+ struct cpufreq_frequency_table *freq_table;
+};
+
+struct clk_lookup {
+ struct list_head node;
+ const char *dev_id;
+ const char *con_id;
+ struct clk *clk;
};
-#define CLK_ALWAYS_ENABLED (1 << 0)
-#define CLK_RATE_PROPAGATES (1 << 1)
+#define CLK_ENABLE_ON_INIT (1 << 0)
/* Should be defined by processor-specific code */
-void arch_init_clk_ops(struct clk_ops **, int type);
+void __deprecated arch_init_clk_ops(struct clk_ops **, int type);
int __init arch_clk_init(void);
/* arch/sh/kernel/cpu/clock.c */
int clk_init(void);
-
-void clk_recalc_rate(struct clk *);
-
+unsigned long followparent_recalc(struct clk *);
+void recalculate_root_clocks(void);
+void propagate_rate(struct clk *);
+int clk_reparent(struct clk *child, struct clk *parent);
int clk_register(struct clk *);
void clk_unregister(struct clk *);
-static inline int clk_always_enable(const char *id)
-{
- struct clk *clk;
- int ret;
-
- clk = clk_get(NULL, id);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- ret = clk_enable(clk);
- if (ret)
- clk_put(clk);
-
- return ret;
-}
+/* arch/sh/kernel/cpu/clock-cpg.c */
+int __init __deprecated cpg_clk_init(void);
/* the exported API, in addition to clk_set_rate */
/**
IP_N1,
};
+
+struct clk_div_mult_table {
+ unsigned int *divisors;
+ unsigned int nr_divisors;
+ unsigned int *multipliers;
+ unsigned int nr_multipliers;
+};
+
+struct cpufreq_frequency_table;
+void clk_rate_table_build(struct clk *clk,
+ struct cpufreq_frequency_table *freq_table,
+ int nr_freqs,
+ struct clk_div_mult_table *src_table,
+ unsigned long *bitmap);
+
+long clk_rate_table_round(struct clk *clk,
+ struct cpufreq_frequency_table *freq_table,
+ unsigned long rate);
+
+#define SH_CLK_MSTP32(_name, _id, _parent, _enable_reg, \
+ _enable_bit, _flags) \
+{ \
+ .name = _name, \
+ .id = _id, \
+ .parent = _parent, \
+ .enable_reg = (void __iomem *)_enable_reg, \
+ .enable_bit = _enable_bit, \
+ .flags = _flags, \
+}
+
+int sh_clk_mstp32_register(struct clk *clks, int nr);
+
+#define SH_CLK_DIV4(_name, _parent, _reg, _shift, _div_bitmap, _flags) \
+{ \
+ .name = _name, \
+ .parent = _parent, \
+ .enable_reg = (void __iomem *)_reg, \
+ .enable_bit = _shift, \
+ .arch_flags = _div_bitmap, \
+ .flags = _flags, \
+}
+
+int sh_clk_div4_register(struct clk *clks, int nr,
+ struct clk_div_mult_table *table);
+
#endif /* __ASM_SH_CLOCK_H */
int platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize);
+void plat_early_device_setup(void);
+
#define HD64461_PCC_WINDOW 0x01000000
/* Area 6 - Slot 0 - memory and/or IO card */
-#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000)
+#define HD64461_IOBASE 0xb0000000
+#define HD64461_IO_OFFSET(x) (HD64461_IOBASE + (x))
+#define HD64461_PCC0_BASE HD64461_IO_OFFSET(0x8000000)
#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */
#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */
#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */
/* Area 5 - Slot 1 - memory card only */
-#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000)
+#define HD64461_PCC1_BASE HD64461_IO_OFFSET(0x4000000)
#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */
#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */
/* Standby Control Register for HD64461 */
-#define HD64461_STBCR CONFIG_HD64461_IOBASE
+#define HD64461_STBCR HD64461_IO_OFFSET(0x00000000)
#define HD64461_STBCR_CKIO_STBY 0x2000
#define HD64461_STBCR_SAFECKE_IST 0x1000
#define HD64461_STBCR_SLCKE_IST 0x0800
#define HD64461_STBCR_SURTST 0x0001
/* System Configuration Register */
-#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02)
+#define HD64461_SYSCR HD64461_IO_OFFSET(0x02)
/* CPU Data Bus Control Register */
-#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04)
+#define HD64461_SCPUCR HD64461_IO_OFFSET(0x04)
/* Base Address Register */
-#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000)
+#define HD64461_LCDCBAR HD64461_IO_OFFSET(0x1000)
/* Line increment address */
-#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002)
+#define HD64461_LCDCLOR HD64461_IO_OFFSET(0x1002)
/* Controls LCD controller */
-#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004)
+#define HD64461_LCDCCR HD64461_IO_OFFSET(0x1004)
/* LCCDR control bits */
#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */
#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */
/* Controls LCD (1) */
-#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010)
+#define HD64461_LDR1 HD64461_IO_OFFSET(0x1010)
#define HD64461_LDR1_DON 0x01 /* Display On */
#define HD64461_LDR1_DINV 0x80 /* Display Invert */
/* Controls LCD (2) */
-#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012)
-#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */
-#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */
-#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */
-#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */
-#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */
+#define HD64461_LDR2 HD64461_IO_OFFSET(0x1012)
+#define HD64461_LDHNCR HD64461_IO_OFFSET(0x1014) /* Number of horizontal characters */
+#define HD64461_LDHNSR HD64461_IO_OFFSET(0x1016) /* Specify output start position + width of CL1 */
+#define HD64461_LDVNTR HD64461_IO_OFFSET(0x1018) /* Specify total vertical lines */
+#define HD64461_LDVNDR HD64461_IO_OFFSET(0x101a) /* specify number of display vertical lines */
+#define HD64461_LDVSPR HD64461_IO_OFFSET(0x101c) /* specify vertical synchronization pos and AC nr */
/* Controls LCD (3) */
-#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e)
+#define HD64461_LDR3 HD64461_IO_OFFSET(0x101e)
/* Palette Registers */
-#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */
-#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */
-#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */
-#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */
+#define HD64461_CPTWAR HD64461_IO_OFFSET(0x1030) /* Color Palette Write Address Register */
+#define HD64461_CPTWDR HD64461_IO_OFFSET(0x1032) /* Color Palette Write Data Register */
+#define HD64461_CPTRAR HD64461_IO_OFFSET(0x1034) /* Color Palette Read Address Register */
+#define HD64461_CPTRDR HD64461_IO_OFFSET(0x1036) /* Color Palette Read Data Register */
-#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */
-#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */
-#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */
+#define HD64461_GRDOR HD64461_IO_OFFSET(0x1040) /* Display Resolution Offset Register */
+#define HD64461_GRSCR HD64461_IO_OFFSET(0x1042) /* Solid Color Register */
+#define HD64461_GRCFGR HD64461_IO_OFFSET(0x1044) /* Accelerator Configuration Register */
#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */
#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */
#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */
/* Line Drawing Registers */
-#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */
-#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */
-#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */
-#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */
-#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */
-#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */
-#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */
+#define HD64461_LNSARH HD64461_IO_OFFSET(0x1046) /* Line Start Address Register (H) */
+#define HD64461_LNSARL HD64461_IO_OFFSET(0x1048) /* Line Start Address Register (L) */
+#define HD64461_LNAXLR HD64461_IO_OFFSET(0x104a) /* Axis Pixel Length Register */
+#define HD64461_LNDGR HD64461_IO_OFFSET(0x104c) /* Diagonal Register */
+#define HD64461_LNAXR HD64461_IO_OFFSET(0x104e) /* Axial Register */
+#define HD64461_LNERTR HD64461_IO_OFFSET(0x1050) /* Start Error Term Register */
+#define HD64461_LNMDR HD64461_IO_OFFSET(0x1052) /* Line Mode Register */
/* BitBLT Registers */
-#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */
-#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */
-#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */
-#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */
-#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */
-#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */
-#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */
-#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */
-#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */
-#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */
-#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */
-#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */
+#define HD64461_BBTSSARH HD64461_IO_OFFSET(0x1054) /* Source Start Address Register (H) */
+#define HD64461_BBTSSARL HD64461_IO_OFFSET(0x1056) /* Source Start Address Register (L) */
+#define HD64461_BBTDSARH HD64461_IO_OFFSET(0x1058) /* Destination Start Address Register (H) */
+#define HD64461_BBTDSARL HD64461_IO_OFFSET(0x105a) /* Destination Start Address Register (L) */
+#define HD64461_BBTDWR HD64461_IO_OFFSET(0x105c) /* Destination Block Width Register */
+#define HD64461_BBTDHR HD64461_IO_OFFSET(0x105e) /* Destination Block Height Register */
+#define HD64461_BBTPARH HD64461_IO_OFFSET(0x1060) /* Pattern Start Address Register (H) */
+#define HD64461_BBTPARL HD64461_IO_OFFSET(0x1062) /* Pattern Start Address Register (L) */
+#define HD64461_BBTMARH HD64461_IO_OFFSET(0x1064) /* Mask Start Address Register (H) */
+#define HD64461_BBTMARL HD64461_IO_OFFSET(0x1066) /* Mask Start Address Register (L) */
+#define HD64461_BBTROPR HD64461_IO_OFFSET(0x1068) /* ROP Register */
+#define HD64461_BBTMDR HD64461_IO_OFFSET(0x106a) /* BitBLT Mode Register */
/* PC Card Controller Registers */
/* Maps to Physical Area 6 */
-#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */
-#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */
-#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */
-#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */
-#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */
+#define HD64461_PCC0ISR HD64461_IO_OFFSET(0x2000) /* socket 0 interface status */
+#define HD64461_PCC0GCR HD64461_IO_OFFSET(0x2002) /* socket 0 general control */
+#define HD64461_PCC0CSCR HD64461_IO_OFFSET(0x2004) /* socket 0 card status change */
+#define HD64461_PCC0CSCIER HD64461_IO_OFFSET(0x2006) /* socket 0 card status change interrupt enable */
+#define HD64461_PCC0SCR HD64461_IO_OFFSET(0x2008) /* socket 0 software control */
/* Maps to Physical Area 5 */
-#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */
-#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */
-#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */
-#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */
-#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */
+#define HD64461_PCC1ISR HD64461_IO_OFFSET(0x2010) /* socket 1 interface status */
+#define HD64461_PCC1GCR HD64461_IO_OFFSET(0x2012) /* socket 1 general control */
+#define HD64461_PCC1CSCR HD64461_IO_OFFSET(0x2014) /* socket 1 card status change */
+#define HD64461_PCC1CSCIER HD64461_IO_OFFSET(0x2016) /* socket 1 card status change interrupt enable */
+#define HD64461_PCC1SCR HD64461_IO_OFFSET(0x2018) /* socket 1 software control */
/* PCC Interface Status Register */
#define HD64461_PCCISR_READY 0x80 /* card ready */
#define HD64461_PCCSCR_SWP 0x01 /* write protect */
/* PCC0 Output Pins Control Register */
-#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a)
+#define HD64461_P0OCR HD64461_IO_OFFSET(0x202a)
/* PCC1 Output Pins Control Register */
-#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c)
+#define HD64461_P1OCR HD64461_IO_OFFSET(0x202c)
/* PC Card General Control Register */
-#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e)
+#define HD64461_PGCR HD64461_IO_OFFSET(0x202e)
/* Port Control Registers */
-#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */
-#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */
-#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */
-#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */
+#define HD64461_GPACR HD64461_IO_OFFSET(0x4000) /* Port A - Handles IRDA/TIMER */
+#define HD64461_GPBCR HD64461_IO_OFFSET(0x4002) /* Port B - Handles UART */
+#define HD64461_GPCCR HD64461_IO_OFFSET(0x4004) /* Port C - Handles PCMCIA 1 */
+#define HD64461_GPDCR HD64461_IO_OFFSET(0x4006) /* Port D - Handles PCMCIA 1 */
/* Port Control Data Registers */
-#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */
-#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */
-#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */
-#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */
+#define HD64461_GPADR HD64461_IO_OFFSET(0x4010) /* A */
+#define HD64461_GPBDR HD64461_IO_OFFSET(0x4012) /* B */
+#define HD64461_GPCDR HD64461_IO_OFFSET(0x4014) /* C */
+#define HD64461_GPDDR HD64461_IO_OFFSET(0x4016) /* D */
/* Interrupt Control Registers */
-#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */
-#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */
-#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */
-#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */
+#define HD64461_GPAICR HD64461_IO_OFFSET(0x4020) /* A */
+#define HD64461_GPBICR HD64461_IO_OFFSET(0x4022) /* B */
+#define HD64461_GPCICR HD64461_IO_OFFSET(0x4024) /* C */
+#define HD64461_GPDICR HD64461_IO_OFFSET(0x4026) /* D */
/* Interrupt Status Registers */
-#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */
-#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */
-#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */
-#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */
+#define HD64461_GPAISR HD64461_IO_OFFSET(0x4040) /* A */
+#define HD64461_GPBISR HD64461_IO_OFFSET(0x4042) /* B */
+#define HD64461_GPCISR HD64461_IO_OFFSET(0x4044) /* C */
+#define HD64461_GPDISR HD64461_IO_OFFSET(0x4046) /* D */
/* Interrupt Request Register & Interrupt Mask Register */
-#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000)
-#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002)
+#define HD64461_NIRR HD64461_IO_OFFSET(0x5000)
+#define HD64461_NIMR HD64461_IO_OFFSET(0x5002)
#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
#define OFFCHIP_IRQ_BASE 64
__BUILD_MEMORY_STRING(b, u8)
__BUILD_MEMORY_STRING(w, u16)
-__BUILD_MEMORY_STRING(q, u64)
+#ifdef CONFIG_SUPERH32
void __raw_writesl(void __iomem *addr, const void *data, int longlen);
void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+#else
+__BUILD_MEMORY_STRING(l, u32)
+#endif
+
+__BUILD_MEMORY_STRING(q, u64)
#define writesb __raw_writesb
#define writesw __raw_writesw
unsigned long flags);
void __iounmap(void __iomem *addr);
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
- const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-#else
-#define __ioremap(offset, size, flags) ((void __iomem *)(offset))
-#define __iounmap(addr) do { } while (0)
-#define onchip_remap(addr, size, name) (addr)
-#define onchip_unmap(addr) do { } while (0)
-#endif /* CONFIG_MMU */
-
static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
return __ioremap(offset, size, flags);
}
+#else
+#define __ioremap_mode(offset, size, flags) ((void __iomem *)(offset))
+#define __iounmap(addr) do { } while (0)
+#endif /* CONFIG_MMU */
#define ioremap(offset, size) \
__ioremap_mode((offset), (size), 0)
* advised to cap this at the hard limit that they're interested in
* through the machvec.
*/
-#define NR_IRQS 256
+#define NR_IRQS 256
+#define NR_IRQS_LEGACY 8 /* Legacy external IRQ0-7 */
/*
* Convert back and forth between INTEVT and IRQ values.
#include <linux/types.h>
#include <linux/ptrace.h>
-typedef u16 kprobe_opcode_t;
+typedef insn_size_t kprobe_opcode_t;
#define BREAKPOINT_INSTRUCTION 0xc33a
#define MAX_INSN_SIZE 16
void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
void (*mv_ioport_unmap)(void __iomem *);
+
+ int (*mv_clk_init)(void);
+ int (*mv_mode_pins)(void);
};
extern struct sh_machine_vector sh_mv;
* external) PCI controllers.
*/
struct pci_channel {
- struct pci_ops *pci_ops;
- struct resource *io_resource;
- struct resource *mem_resource;
- int first_devfn;
- int last_devfn;
-};
+ struct pci_channel *next;
-/*
- * Each board initializes this array and terminates it with a NULL entry.
- */
-extern struct pci_channel board_pci_channels[];
+ struct pci_ops *pci_ops;
+ struct resource *io_resource;
+ struct resource *mem_resource;
-#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start
-#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start
+ unsigned long io_offset;
+ unsigned long mem_offset;
-/*
- * I/O routine helpers
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
-#define PCI_IO_AREA 0xFE400000
-#define PCI_IO_SIZE 0x00400000
-#elif defined(CONFIG_CPU_SH5)
-extern unsigned long PCI_IO_AREA;
-#define PCI_IO_SIZE 0x00010000
-#else
-#define PCI_IO_AREA 0xFE240000
-#define PCI_IO_SIZE 0x00040000
-#endif
+ unsigned long reg_base;
-#define PCI_MEM_SIZE 0x01000000
+ unsigned long io_map_base;
+};
-#define SH4_PCIIOBR_MASK 0xFFFC0000
-#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
+extern void register_pci_controller(struct pci_channel *hose);
-#if defined(CONFIG_PCI)
-#define is_pci_ioaddr(port) \
- (((port) >= PCIBIOS_MIN_IO) && \
- ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
-#define is_pci_memaddr(port) \
- (((port) >= PCIBIOS_MIN_MEM) && \
- ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
-#else
-#define is_pci_ioaddr(port) (0)
-#define is_pci_memaddr(port) (0)
-#endif
+extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM;
struct pci_dev;
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
extern void pcibios_set_master(struct pci_dev *dev);
static inline void pcibios_penalize_isa_irq(int irq, int active)
#endif
#ifdef CONFIG_PCI
+/*
+ * None of the SH PCI controllers support MWI, it is always treated as a
+ * direct memory write.
+ */
+#define PCI_DISABLE_MWI
+
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
+ unsigned long cacheline_size;
+ u8 byte;
+
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+
+ if (byte == 0)
+ cacheline_size = L1_CACHE_BYTES;
+ else
+ cacheline_size = byte << 2;
+
+ *strat = PCI_DMA_BURST_MULTIPLE;
+ *strategy_parameter = cacheline_size;
}
#endif
+#ifdef CONFIG_SUPERH32
+/*
+ * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped
+ * at the end of the address space in a special non-translatable area.
+ */
+#define PCI_MEM_FIXED_START 0xfd000000
+#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000)
+
+#define is_pci_memory_fixed_range(s, e) \
+ ((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END)
+#else
+#define is_pci_memory_fixed_range(s, e) (0)
+#endif
+
/* Board-specific fixup routines. */
-void pcibios_fixup(void);
-int pcibios_init_platform(void);
int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
-#ifdef CONFIG_PCI_AUTO
-int pciauto_assign_resources(int busno, struct pci_channel *hose);
-#endif
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region, struct resource *res);
-#endif /* __KERNEL__ */
+extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
-/* generic pci stuff */
-#include <asm-generic/pci.h>
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+/* Chances are this interrupt is wired PC-style ... */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
/* generic DMA-mapping stuff */
#include <asm-generic/pci-dma-compat.h>
+#endif /* __KERNEL__ */
#endif /* __ASM_SH_PCI_H */
#define kmap_coherent_init() do { } while (0)
#endif
+/* arch/sh/mm/mmap.c */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
#include <asm-generic/pgtable.h>
#endif /* __ASM_SH_PGTABLE_H */
/* SH-4A types */
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
- CPU_SH7723, CPU_SHX3,
+ CPU_SH7723, CPU_SH7724, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366,
const char *get_cpu_subtype(struct sh_cpuinfo *c);
extern const struct seq_operations cpuinfo_op;
+/* processor boot mode configuration */
+int generic_mode_pins(void);
+int test_mode_pin(int pin);
+
#ifdef CONFIG_VSYSCALL
int vsyscall_init(void);
#else
#define PTRACE_GETDSPREGS 55 /* DSP registers */
#define PTRACE_SETDSPREGS 56
+#define PT_TEXT_END_ADDR 240
+#define PT_TEXT_ADDR 244 /* &(struct user)->start_code */
+#define PT_DATA_ADDR 248 /* &(struct user)->start_data */
+#define PT_TEXT_LEN 252
+
#ifdef __KERNEL__
#include <asm/addrspace.h>
extern void (*rtc_sh_get_time)(struct timespec *);
extern int (*rtc_sh_set_time)(const time_t);
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100 /* battery bad */
+#define RTC_SQWE 0x08 /* enable square-wave output */
+#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
+#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
+
+struct rtc_time;
+unsigned int get_rtc_time(struct rtc_time *);
+int set_rtc_time(struct rtc_time *);
+
#define RTC_CAP_4_DIGIT_YEAR (1 << 0)
struct sh_rtc_platform_info {
{
__asm__(
#ifdef __SH5__
- "byterev %0, %0\n\t"
+ "byterev %1, %0\n\t"
"shari %0, 32, %0"
#else
- "swap.b %0, %0\n\t"
+ "swap.b %1, %0\n\t"
"swap.w %0, %0\n\t"
"swap.b %0, %0"
#endif
: "=r" (x)
- : "0" (x));
+ : "r" (x));
return x;
}
{
__asm__(
#ifdef __SH5__
- "byterev %0, %0\n\t"
+ "byterev %1, %0\n\t"
"shari %0, 32, %0"
#else
- "swap.b %0, %0"
+ "swap.b %1, %0"
#endif
: "=r" (x)
- : "0" (x));
+ : "r" (x));
return x;
}
})
#endif
-int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
struct mem_access *ma);
asmlinkage void do_address_error(struct pt_regs *regs,
+++ /dev/null
-#ifndef __ASM_SH_TIMER_H
-#define __ASM_SH_TIMER_H
-
-#include <linux/sysdev.h>
-#include <linux/clocksource.h>
-#include <cpu/timer.h>
-
-struct sys_timer_ops {
- int (*init)(void);
- int (*start)(void);
- int (*stop)(void);
-#ifndef CONFIG_GENERIC_TIME
- unsigned long (*get_offset)(void);
-#endif
-};
-
-struct sys_timer {
- const char *name;
-
- struct sys_device dev;
- struct sys_timer_ops *ops;
-};
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
-extern struct sys_timer *sys_timer;
-
-#ifndef CONFIG_GENERIC_TIME
-static inline unsigned long get_timer_offset(void)
-{
- return sys_timer->ops->get_offset();
-}
-#endif
-
-/* arch/sh/kernel/timers/timer.c */
-struct sys_timer *get_sys_timer(void);
-
-/* arch/sh/kernel/time.c */
-void handle_timer_tick(void);
-
-extern struct clocksource clocksource_sh;
-
-#endif /* __ASM_SH_TIMER_H */
typedef u32 dma_addr_t;
#ifdef CONFIG_SUPERH32
-typedef u16 opcode_t;
+typedef u16 insn_size_t;
#else
-typedef u32 opcode_t;
+typedef u32 insn_size_t;
#endif
#endif /* __ASSEMBLY__ */
#define BRCR_CMFA (1 << 15)
#define BRCR_CMFB (1 << 14)
+
+#if defined CONFIG_CPU_SH2A
+#define BRCR_CMFCA (1 << 15)
+#define BRCR_CMFCB (1 << 14)
+#define BRCR_CMFDA (1 << 13)
+#define BRCR_CMFDB (1 << 12)
+#define BRCR_PCBB (1 << 6) /* 1: after execution */
+#define BRCR_PCBA (1 << 5) /* 1: after execution */
+#define BRCR_PCTE 0
+#else
#define BRCR_PCTE (1 << 11)
#define BRCR_PCBA (1 << 10) /* 1: after execution */
#define BRCR_DBEB (1 << 7)
#define BRCR_PCBB (1 << 6)
#define BRCR_SEQ (1 << 3)
#define BRCR_UBDE (1 << 0)
+#endif
#ifndef __ASSEMBLY__
/* arch/sh/kernel/cpu/ubc.S */
/*
* SH-4A has support for unaligned 32-bit loads, and 32-bit loads only.
- * Support for 16 and 64-bit accesses are done through shifting and
- * masking relative to the endianness. Unaligned stores are not supported
- * by the instruction encoding, so these continue to use the packed
+ * Support for 64-bit accesses are done through shifting and masking
+ * relative to the endianness. Unaligned stores are not supported by the
+ * instruction encoding, so these continue to use the packed
* struct.
*
* The same note as with the movli.l/movco.l pair applies here, as long
static inline u16 __get_unaligned_cpu16(const u8 *p)
{
#ifdef __LITTLE_ENDIAN
- return __get_unaligned_cpu32(p) & 0xffff;
+ return p[0] | p[1] << 8;
#else
- return __get_unaligned_cpu32(p) >> 16;
+ return p[0] << 8 | p[1];
#endif
}
-#include <cpu-sh2/cpu/ubc.h>
+/*
+ * SH-2A UBC definitions
+ *
+ * Copyright (C) 2008 Kieran Bingham
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_CPU_SH2A_UBC_H
+#define __ASM_CPU_SH2A_UBC_H
+
+#define UBC_BARA 0xfffc0400
+#define UBC_BAMRA 0xfffc0404
+#define UBC_BBRA 0xfffc04a0 /* 16 bit access */
+#define UBC_BDRA 0xfffc0408
+#define UBC_BDMRA 0xfffc040c
+
+#define UBC_BARB 0xfffc0410
+#define UBC_BAMRB 0xfffc0414
+#define UBC_BBRB 0xfffc04b0 /* 16 bit access */
+#define UBC_BDRB 0xfffc0418
+#define UBC_BDMRB 0xfffc041c
+
+#define UBC_BRCR 0xfffc04c0
+
+#endif /* __ASM_CPU_SH2A_UBC_H */
+++ /dev/null
-/*
- * include/asm-sh/cpu-sh3/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH3_TIMER_H
-#define __ASM_CPU_SH3_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH3 processors
- * SH7706
- * SH7709S
- * SH7727
- * SH7729R
- * SH7710
- * SH7720
- * SH7710
- * ---------------------------------------------------------------------------
- */
-
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_TOCR 0xfffffe90 /* Byte access */
-#endif
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU_012_TSTR 0xa412fe92 /* Byte access */
-
-#define TMU0_TCOR 0xa412fe94 /* Long access */
-#define TMU0_TCNT 0xa412fe98 /* Long access */
-#define TMU0_TCR 0xa412fe9c /* Word access */
-
-#define TMU1_TCOR 0xa412fea0 /* Long access */
-#define TMU1_TCNT 0xa412fea4 /* Long access */
-#define TMU1_TCR 0xa412fea8 /* Word access */
-
-#define TMU2_TCOR 0xa412feac /* Long access */
-#define TMU2_TCNT 0xa412feb0 /* Long access */
-#define TMU2_TCR 0xa412feb4 /* Word access */
-
-#else
-#define TMU_012_TSTR 0xfffffe92 /* Byte access */
-
-#define TMU0_TCOR 0xfffffe94 /* Long access */
-#define TMU0_TCNT 0xfffffe98 /* Long access */
-#define TMU0_TCR 0xfffffe9c /* Word access */
-
-#define TMU1_TCOR 0xfffffea0 /* Long access */
-#define TMU1_TCNT 0xfffffea4 /* Long access */
-#define TMU1_TCR 0xfffffea8 /* Word access */
-
-#define TMU2_TCOR 0xfffffeac /* Long access */
-#define TMU2_TCNT 0xfffffeb0 /* Long access */
-#define TMU2_TCR 0xfffffeb4 /* Word access */
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define TMU2_TCPR2 0xfffffeb8 /* Long access */
-#endif
-#endif
-
-#endif /* __ASM_CPU_SH3_TIMER_H */
-
#define CACHE_IC_ADDRESS_ARRAY 0xf0000000
#define CACHE_OC_ADDRESS_ARRAY 0xf4000000
+#define RAMCR 0xFF000074
+
#endif /* __ASM_CPU_SH4_CACHE_H */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define FRQCRA 0xa4150000
+#define FRQCRB 0xa4150004
+#define VCLKCR 0xa4150048
+
+#define FCLKACR 0xa4150008
+#define FCLKBCR 0xa415000c
+#define FRQCR FRQCRA
+#define SCLKACR FCLKACR
+#define SCLKBCR FCLKBCR
+#define FCLKACR 0xa4150008
+#define FCLKBCR 0xa415000c
+#define IrDACLKCR 0xa4150018
+
+#define MSTPCR0 0xa4150030
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
--- /dev/null
+#ifndef __ASM_SH7724_H__
+#define __ASM_SH7724_H__
+
+enum {
+ /* PTA */
+ GPIO_PTA7, GPIO_PTA6, GPIO_PTA5, GPIO_PTA4,
+ GPIO_PTA3, GPIO_PTA2, GPIO_PTA1, GPIO_PTA0,
+
+ /* PTB */
+ GPIO_PTB7, GPIO_PTB6, GPIO_PTB5, GPIO_PTB4,
+ GPIO_PTB3, GPIO_PTB2, GPIO_PTB1, GPIO_PTB0,
+
+ /* PTC */
+ GPIO_PTC7, GPIO_PTC6, GPIO_PTC5, GPIO_PTC4,
+ GPIO_PTC3, GPIO_PTC2, GPIO_PTC1, GPIO_PTC0,
+
+ /* PTD */
+ GPIO_PTD7, GPIO_PTD6, GPIO_PTD5, GPIO_PTD4,
+ GPIO_PTD3, GPIO_PTD2, GPIO_PTD1, GPIO_PTD0,
+
+ /* PTE */
+ GPIO_PTE7, GPIO_PTE6, GPIO_PTE5, GPIO_PTE4,
+ GPIO_PTE3, GPIO_PTE2, GPIO_PTE1, GPIO_PTE0,
+
+ /* PTF */
+ GPIO_PTF7, GPIO_PTF6, GPIO_PTF5, GPIO_PTF4,
+ GPIO_PTF3, GPIO_PTF2, GPIO_PTF1, GPIO_PTF0,
+
+ /* PTG */
+ GPIO_PTG5, GPIO_PTG4,
+ GPIO_PTG3, GPIO_PTG2, GPIO_PTG1, GPIO_PTG0,
+
+ /* PTH */
+ GPIO_PTH7, GPIO_PTH6, GPIO_PTH5, GPIO_PTH4,
+ GPIO_PTH3, GPIO_PTH2, GPIO_PTH1, GPIO_PTH0,
+
+ /* PTJ */
+ GPIO_PTJ7, GPIO_PTJ6, GPIO_PTJ5,
+ GPIO_PTJ3, GPIO_PTJ2, GPIO_PTJ1, GPIO_PTJ0,
+
+ /* PTK */
+ GPIO_PTK7, GPIO_PTK6, GPIO_PTK5, GPIO_PTK4,
+ GPIO_PTK3, GPIO_PTK2, GPIO_PTK1, GPIO_PTK0,
+
+ /* PTL */
+ GPIO_PTL7, GPIO_PTL6, GPIO_PTL5, GPIO_PTL4,
+ GPIO_PTL3, GPIO_PTL2, GPIO_PTL1, GPIO_PTL0,
+
+ /* PTM */
+ GPIO_PTM7, GPIO_PTM6, GPIO_PTM5, GPIO_PTM4,
+ GPIO_PTM3, GPIO_PTM2, GPIO_PTM1, GPIO_PTM0,
+
+ /* PTN */
+ GPIO_PTN7, GPIO_PTN6, GPIO_PTN5, GPIO_PTN4,
+ GPIO_PTN3, GPIO_PTN2, GPIO_PTN1, GPIO_PTN0,
+
+ /* PTQ */
+ GPIO_PTQ7, GPIO_PTQ6, GPIO_PTQ5, GPIO_PTQ4,
+ GPIO_PTQ3, GPIO_PTQ2, GPIO_PTQ1, GPIO_PTQ0,
+
+ /* PTR */
+ GPIO_PTR7, GPIO_PTR6, GPIO_PTR5, GPIO_PTR4,
+ GPIO_PTR3, GPIO_PTR2, GPIO_PTR1, GPIO_PTR0,
+
+ /* PTS */
+ GPIO_PTS6, GPIO_PTS5, GPIO_PTS4,
+ GPIO_PTS3, GPIO_PTS2, GPIO_PTS1, GPIO_PTS0,
+
+ /* PTT */
+ GPIO_PTT7, GPIO_PTT6, GPIO_PTT5, GPIO_PTT4,
+ GPIO_PTT3, GPIO_PTT2, GPIO_PTT1, GPIO_PTT0,
+
+ /* PTU */
+ GPIO_PTU7, GPIO_PTU6, GPIO_PTU5, GPIO_PTU4,
+ GPIO_PTU3, GPIO_PTU2, GPIO_PTU1, GPIO_PTU0,
+
+ /* PTV */
+ GPIO_PTV7, GPIO_PTV6, GPIO_PTV5, GPIO_PTV4,
+ GPIO_PTV3, GPIO_PTV2, GPIO_PTV1, GPIO_PTV0,
+
+ /* PTW */
+ GPIO_PTW7, GPIO_PTW6, GPIO_PTW5, GPIO_PTW4,
+ GPIO_PTW3, GPIO_PTW2, GPIO_PTW1, GPIO_PTW0,
+
+ /* PTX */
+ GPIO_PTX7, GPIO_PTX6, GPIO_PTX5, GPIO_PTX4,
+ GPIO_PTX3, GPIO_PTX2, GPIO_PTX1, GPIO_PTX0,
+
+ /* PTY */
+ GPIO_PTY7, GPIO_PTY6, GPIO_PTY5, GPIO_PTY4,
+ GPIO_PTY3, GPIO_PTY2, GPIO_PTY1, GPIO_PTY0,
+
+ /* PTZ */
+ GPIO_PTZ7, GPIO_PTZ6, GPIO_PTZ5, GPIO_PTZ4,
+ GPIO_PTZ3, GPIO_PTZ2, GPIO_PTZ1, GPIO_PTZ0,
+
+ /* BSC (PTA/PTB/PTJ/PTQ/PTR/PTT) */
+ GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+ GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+ GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+ GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+ GPIO_FN_D15, GPIO_FN_D14, GPIO_FN_D13, GPIO_FN_D12,
+ GPIO_FN_D11, GPIO_FN_D10, GPIO_FN_D9, GPIO_FN_D8,
+ GPIO_FN_D7, GPIO_FN_D6, GPIO_FN_D5, GPIO_FN_D4,
+ GPIO_FN_D3, GPIO_FN_D2, GPIO_FN_D1, GPIO_FN_D0,
+ GPIO_FN_A25, GPIO_FN_A24, GPIO_FN_A23, GPIO_FN_A22,
+ GPIO_FN_CS6B_CE1B, GPIO_FN_CS6A_CE2B,
+ GPIO_FN_CS5B_CE1A, GPIO_FN_CS5A_CE2A,
+ GPIO_FN_WE3_ICIOWR, GPIO_FN_WE2_ICIORD,
+ GPIO_FN_IOIS16, GPIO_FN_WAIT,
+ GPIO_FN_BS,
+
+ /* KEYSC (PTA/PTB)*/
+ GPIO_FN_KEYOUT5_IN5, GPIO_FN_KEYOUT4_IN6, GPIO_FN_KEYIN4,
+ GPIO_FN_KEYIN3, GPIO_FN_KEYIN2, GPIO_FN_KEYIN1, GPIO_FN_KEYIN0,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT2, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT0,
+
+ /* ATAPI (PTA/PTB/PTK/PTR/PTS/PTW) */
+ GPIO_FN_IDED15, GPIO_FN_IDED14, GPIO_FN_IDED13, GPIO_FN_IDED12,
+ GPIO_FN_IDED11, GPIO_FN_IDED10, GPIO_FN_IDED9, GPIO_FN_IDED8,
+ GPIO_FN_IDED7, GPIO_FN_IDED6, GPIO_FN_IDED5, GPIO_FN_IDED4,
+ GPIO_FN_IDED3, GPIO_FN_IDED2, GPIO_FN_IDED1, GPIO_FN_IDED0,
+ GPIO_FN_IDEA2, GPIO_FN_IDEA1, GPIO_FN_IDEA0, GPIO_FN_IDEIOWR,
+ GPIO_FN_IODREQ, GPIO_FN_IDECS0, GPIO_FN_IDECS1, GPIO_FN_IDEIORD,
+ GPIO_FN_DIRECTION, GPIO_FN_EXBUF_ENB, GPIO_FN_IDERST, GPIO_FN_IODACK,
+ GPIO_FN_IDEINT, GPIO_FN_IDEIORDY,
+
+ /* TPU (PTB/PTR/PTS) */
+ GPIO_FN_TPUTO3, GPIO_FN_TPUTO2, GPIO_FN_TPUTO1, GPIO_FN_TPUTO0,
+ GPIO_FN_TPUTI3, GPIO_FN_TPUTI2,
+
+ /* LCDC (PTC/PTD/PTE/PTF/PTM/PTR) */
+ GPIO_FN_LCDD23, GPIO_FN_LCDD22, GPIO_FN_LCDD21, GPIO_FN_LCDD20,
+ GPIO_FN_LCDD19, GPIO_FN_LCDD18, GPIO_FN_LCDD17, GPIO_FN_LCDD16,
+ GPIO_FN_LCDD15, GPIO_FN_LCDD14, GPIO_FN_LCDD13, GPIO_FN_LCDD12,
+ GPIO_FN_LCDD11, GPIO_FN_LCDD10, GPIO_FN_LCDD9, GPIO_FN_LCDD8,
+ GPIO_FN_LCDD7, GPIO_FN_LCDD6, GPIO_FN_LCDD5, GPIO_FN_LCDD4,
+ GPIO_FN_LCDD3, GPIO_FN_LCDD2, GPIO_FN_LCDD1, GPIO_FN_LCDD0,
+ GPIO_FN_LCDVSYN, GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_LCDHSYN,
+ GPIO_FN_LCDCS, GPIO_FN_LCDDON, GPIO_FN_LCDDCK, GPIO_FN_LCDWR,
+ GPIO_FN_LCDVEPWC, GPIO_FN_LCDVCPWC, GPIO_FN_LCDRD, GPIO_FN_LCDLCLK,
+
+ /* SCIF0 (PTF/PTM) */
+ GPIO_FN_SCIF0_TXD, GPIO_FN_SCIF0_RXD, GPIO_FN_SCIF0_SCK,
+
+ /* SCIF1 (PTL) */
+ GPIO_FN_SCIF1_SCK, GPIO_FN_SCIF1_RXD, GPIO_FN_SCIF1_TXD,
+
+ /* SCIF2 (PTE/PTF/PTN) with LCDC, VOU */
+ GPIO_FN_SCIF2_L_TXD, GPIO_FN_SCIF2_L_SCK, GPIO_FN_SCIF2_L_RXD,
+ GPIO_FN_SCIF2_V_TXD, GPIO_FN_SCIF2_V_SCK, GPIO_FN_SCIF2_V_RXD,
+
+ /* SCIF3 (PTL/PTN/PTZ) with VOU, IRQ */
+ GPIO_FN_SCIF3_V_SCK, GPIO_FN_SCIF3_V_RXD, GPIO_FN_SCIF3_V_TXD,
+ GPIO_FN_SCIF3_V_CTS, GPIO_FN_SCIF3_V_RTS,
+ GPIO_FN_SCIF3_I_SCK, GPIO_FN_SCIF3_I_RXD, GPIO_FN_SCIF3_I_TXD,
+ GPIO_FN_SCIF3_I_CTS, GPIO_FN_SCIF3_I_RTS,
+
+ /* SCIF4 (PTE) */
+ GPIO_FN_SCIF4_SCK, GPIO_FN_SCIF4_RXD, GPIO_FN_SCIF4_TXD,
+
+ /* SCIF5 (PTS) */
+ GPIO_FN_SCIF5_SCK, GPIO_FN_SCIF5_RXD, GPIO_FN_SCIF5_TXD,
+
+ /* FSI (PTE/PTU/PTV) */
+ GPIO_FN_FSIMCKB, GPIO_FN_FSIMCKA, GPIO_FN_FSIOASD,
+ GPIO_FN_FSIIABCK, GPIO_FN_FSIIALRCK, GPIO_FN_FSIOABCK,
+ GPIO_FN_FSIOALRCK, GPIO_FN_CLKAUDIOAO, GPIO_FN_FSIIBSD,
+ GPIO_FN_FSIOBSD, GPIO_FN_FSIIBBCK, GPIO_FN_FSIIBLRCK,
+ GPIO_FN_FSIOBBCK, GPIO_FN_FSIOBLRCK, GPIO_FN_CLKAUDIOBO,
+ GPIO_FN_FSIIASD,
+
+ /* AUD (PTG) */
+ GPIO_FN_AUDCK, GPIO_FN_AUDSYNC, GPIO_FN_AUDATA3,
+ GPIO_FN_AUDATA2, GPIO_FN_AUDATA1, GPIO_FN_AUDATA0,
+
+ /* VIO (PTS) (common?) */
+ GPIO_FN_VIO_CKO,
+
+ /* VIO0 (PTH/PTK) */
+ GPIO_FN_VIO0_D15, GPIO_FN_VIO0_D14, GPIO_FN_VIO0_D13, GPIO_FN_VIO0_D12,
+ GPIO_FN_VIO0_D11, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D8,
+ GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D5, GPIO_FN_VIO0_D4,
+ GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D2, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D0,
+ GPIO_FN_VIO0_VD, GPIO_FN_VIO0_CLK,
+ GPIO_FN_VIO0_FLD, GPIO_FN_VIO0_HD,
+
+ /* VIO1 (PTK/PTS) */
+ GPIO_FN_VIO1_D7, GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D5, GPIO_FN_VIO1_D4,
+ GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D2, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D0,
+ GPIO_FN_VIO1_FLD, GPIO_FN_VIO1_HD, GPIO_FN_VIO1_VD, GPIO_FN_VIO1_CLK,
+
+ /* Eth (PTL/PTN/PTX) */
+ GPIO_FN_RMII_RXD0, GPIO_FN_RMII_RXD1,
+ GPIO_FN_RMII_TXD0, GPIO_FN_RMII_TXD1,
+ GPIO_FN_RMII_REF_CLK, GPIO_FN_RMII_TX_EN,
+ GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_CRS_DV,
+ GPIO_FN_LNKSTA, GPIO_FN_MDIO,
+ GPIO_FN_MDC,
+
+ /* System (PTJ) */
+ GPIO_FN_PDSTATUS, GPIO_FN_STATUS2, GPIO_FN_STATUS0,
+
+ /* VOU (PTL/PTM/PTN*/
+ GPIO_FN_DV_D15, GPIO_FN_DV_D14, GPIO_FN_DV_D13, GPIO_FN_DV_D12,
+ GPIO_FN_DV_D11, GPIO_FN_DV_D10, GPIO_FN_DV_D9, GPIO_FN_DV_D8,
+ GPIO_FN_DV_D7, GPIO_FN_DV_D6, GPIO_FN_DV_D5, GPIO_FN_DV_D4,
+ GPIO_FN_DV_D3, GPIO_FN_DV_D2, GPIO_FN_DV_D1, GPIO_FN_DV_D0,
+ GPIO_FN_DV_CLKI, GPIO_FN_DV_CLK, GPIO_FN_DV_VSYNC, GPIO_FN_DV_HSYNC,
+
+ /* MSIOF0 (PTL/PTM) */
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_MSIOF0_MCK, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_MSIOF0_TSYNC, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_RSYNC,
+
+ /* MSIOF1 (PTV) */
+ GPIO_FN_MSIOF1_RXD, GPIO_FN_MSIOF1_TXD,
+ GPIO_FN_MSIOF1_MCK, GPIO_FN_MSIOF1_TSCK,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_MSIOF1_SS2,
+ GPIO_FN_MSIOF1_TSYNC, GPIO_FN_MSIOF1_RSCK,
+ GPIO_FN_MSIOF1_RSYNC,
+
+ /* DMAC (PTU/PTX) */
+ GPIO_FN_DMAC_DACK0, GPIO_FN_DMAC_DREQ0,
+ GPIO_FN_DMAC_DACK1, GPIO_FN_DMAC_DREQ1,
+
+ /* SDHI0 (PTY) */
+ GPIO_FN_SDHI0CD, GPIO_FN_SDHI0WP, GPIO_FN_SDHI0CMD, GPIO_FN_SDHI0CLK,
+ GPIO_FN_SDHI0D3, GPIO_FN_SDHI0D2, GPIO_FN_SDHI0D1, GPIO_FN_SDHI0D0,
+
+ /* SDHI1 (PTW) */
+ GPIO_FN_SDHI1CD, GPIO_FN_SDHI1WP, GPIO_FN_SDHI1CMD, GPIO_FN_SDHI1CLK,
+ GPIO_FN_SDHI1D3, GPIO_FN_SDHI1D2, GPIO_FN_SDHI1D1, GPIO_FN_SDHI1D0,
+
+ /* MMC (PTW/PTX)*/
+ GPIO_FN_MMC_D7, GPIO_FN_MMC_D6, GPIO_FN_MMC_D5, GPIO_FN_MMC_D4,
+ GPIO_FN_MMC_D3, GPIO_FN_MMC_D2, GPIO_FN_MMC_D1, GPIO_FN_MMC_D0,
+ GPIO_FN_MMC_CLK, GPIO_FN_MMC_CMD,
+
+ /* IrDA (PTX) */
+ GPIO_FN_IRDA_OUT, GPIO_FN_IRDA_IN,
+
+ /* TSIF (PTX) */
+ GPIO_FN_TSIF_TS0_SDAT, GPIO_FN_TSIF_TS0_SCK,
+ GPIO_FN_TSIF_TS0_SDEN, GPIO_FN_TSIF_TS0_SPSYNC,
+
+ /* IRQ (PTZ) */
+ GPIO_FN_INTC_IRQ7, GPIO_FN_INTC_IRQ6, GPIO_FN_INTC_IRQ5,
+ GPIO_FN_INTC_IRQ4, GPIO_FN_INTC_IRQ3, GPIO_FN_INTC_IRQ2,
+ GPIO_FN_INTC_IRQ1, GPIO_FN_INTC_IRQ0,
+};
+
+#endif /* __ASM_SH7724_H__ */
#ifndef __ASM_SH7785_H__
#define __ASM_SH7785_H__
+/* Boot Mode Pins, more information in sh7785 manual Rev.1.00, page 1628 */
+enum {
+ MODE_PIN_MODE0, /* CPG - Initial Pck/Bck Frequency [FRQMR1] */
+ MODE_PIN_MODE1, /* CPG - Initial Uck/SHck/DDRck Frequency [FRQMR1] */
+ MODE_PIN_MODE2, /* CPG - Reserved (L: Normal operation) */
+ MODE_PIN_MODE3, /* CPG - Reserved (L: Normal operation) */
+ MODE_PIN_MODE4, /* CPG - Initial PLL setting (72x/36x) */
+ MODE_PIN_MODE5, /* LBSC - Area0 Memory Type / Bus Width [CS0BCR.8] */
+ MODE_PIN_MODE6, /* LBSC - Area0 Memory Type / Bus Width [CS0BCR.9] */
+ MODE_PIN_MODE7, /* LBSC - Area0 Memory Type / Bus Width [CS0BCR.3] */
+ MODE_PIN_MODE8, /* LBSC - Endian Mode (L: Big, H: Little) [BCR.31] */
+ MODE_PIN_MODE9, /* LBSC - Master/Slave Mode (L: Slave) [BCR.30] */
+ MODE_PIN_MODE10, /* CPG - Clock Input (L: Ext Clk, H: Crystal) */
+ MODE_PIN_MODE11, /* PCI - Pin Mode (LL: PCI host, LH: PCI slave) */
+ MODE_PIN_MODE12, /* PCI - Pin Mode (HL: Local bus, HH: DU) */
+ MODE_PIN_MODE13, /* Boot Address Mode (L: 29-bit, H: 32-bit) */
+ MODE_PIN_MODE14, /* Reserved (H: Normal operation) */
+ MODE_PIN_MPMD, /* Emulation Mode (L: Emulation mode, H: LSI mode) */
+};
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_Pxx - GPIO mapped to real I/O pin on CPU
+ */
enum {
/* PA */
GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+++ /dev/null
-/*
- * include/asm-sh/cpu-sh4/timer.h
- *
- * Copyright (C) 2004 Lineo Solutions, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_CPU_SH4_TIMER_H
-#define __ASM_CPU_SH4_TIMER_H
-
-/*
- * ---------------------------------------------------------------------------
- * TMU Common definitions for SH4 processors
- * SH7750S/SH7750R
- * SH7751/SH7751R
- * SH7760
- * SH-X3
- * ---------------------------------------------------------------------------
- */
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
-#define TMU_012_BASE 0xffc10000
-#define TMU_345_BASE 0xffc20000
-#else
-#define TMU_012_BASE 0xffd80000
-#define TMU_345_BASE 0xfe100000
-#endif
-
-#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */
-
-#define TMU_012_TSTR (TMU_012_BASE + 0x04)
-#define TMU_345_TSTR (TMU_345_BASE + 0x04)
-
-#define TMU0_TCOR (TMU_012_BASE + 0x08)
-#define TMU0_TCNT (TMU_012_BASE + 0x0c)
-#define TMU0_TCR (TMU_012_BASE + 0x10)
-
-#define TMU1_TCOR (TMU_012_BASE + 0x14)
-#define TMU1_TCNT (TMU_012_BASE + 0x18)
-#define TMU1_TCR (TMU_012_BASE + 0x1c)
-
-#define TMU2_TCOR (TMU_012_BASE + 0x20)
-#define TMU2_TCNT (TMU_012_BASE + 0x24)
-#define TMU2_TCR (TMU_012_BASE + 0x28)
-#define TMU2_TCPR (TMU_012_BASE + 0x2c)
-
-#define TMU3_TCOR (TMU_345_BASE + 0x08)
-#define TMU3_TCNT (TMU_345_BASE + 0x0c)
-#define TMU3_TCR (TMU_345_BASE + 0x10)
-
-#define TMU4_TCOR (TMU_345_BASE + 0x14)
-#define TMU4_TCNT (TMU_345_BASE + 0x18)
-#define TMU4_TCR (TMU_345_BASE + 0x1c)
-
-#define TMU5_TCOR (TMU_345_BASE + 0x20)
-#define TMU5_TCNT (TMU_345_BASE + 0x24)
-#define TMU5_TCR (TMU_345_BASE + 0x28)
-
-#endif /* __ASM_CPU_SH4_TIMER_H */
#define TOP_PRIORITY 15
extern int intc_evt_to_irq[(0xE20/0x20)+1];
-int intc_irq_describe(char* p, int irq);
extern int platform_int_priority[NR_INTC_IRQS];
#endif /* __ASM_SH_CPU_SH5_IRQ_H */
* -----------------------------+---------------+---------------
* 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash
* 0x04000000 - 0x05ffffff(CS1) | PLD | PLD
- * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C
+ * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C
* 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM
* 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM
* 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107
- * 0x14000000 - 0x17ffffff(CS5) | I2C | USB
+ * 0x14000000 - 0x17ffffff(CS5) | reserved | USB
* 0x18000000 - 0x1bffffff(CS6) | reserved | SD
* 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use)
*
#define PLD_VERSR (PLD_BASE_ADDR + 0x0c)
#define PLD_MMSR (PLD_BASE_ADDR + 0x0e)
+#define PCA9564_ADDR 0x06000000 /* I2C */
+#define PCA9564_SIZE 0x00000100
+
#define SM107_MEM_ADDR 0x10000000
#define SM107_MEM_SIZE 0x00e00000
#define SM107_REG_ADDR 0x13e00000
#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
#define R8A66597_ADDR 0x14000000 /* USB */
#define CG200_ADDR 0x18000000 /* SD */
-#define PCA9564_ADDR 0x06000000 /* I2C */
#else
#define R8A66597_ADDR 0x08000000
#define CG200_ADDR 0x0c000000
-#define PCA9564_ADDR 0x14000000
#endif
#define R8A66597_SIZE 0x00000100
#define CG200_SIZE 0x00010000
-#define PCA9564_SIZE 0x00000100
#endif /* __ASM_SH_RENESAS_SH7785LCR_H */
#define GAPSPCI_IRQ HW_EVENT_EXTERNAL
+extern struct pci_ops gapspci_pci_ops;
+
#endif /* __ASM_SH_DREAMCAST_PCI_H */
--- /dev/null
+#ifndef __ASM_SH_SE7724_H
+#define __ASM_SH_SE7724_H
+
+/*
+ * linux/include/asm-sh/se7724.h
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * Based on se7722.h
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+#define PA_LED (0xba203000) /* 8bit LED */
+#define IRQ_MODE (0xba200010)
+#define IRQ0_SR (0xba200014)
+#define IRQ1_SR (0xba200018)
+#define IRQ2_SR (0xba20001c)
+#define IRQ0_MR (0xba200020)
+#define IRQ1_MR (0xba200024)
+#define IRQ2_MR (0xba200028)
+
+/* IRQ */
+#define IRQ0_IRQ 32
+#define IRQ1_IRQ 33
+#define IRQ2_IRQ 34
+
+/* Bits in IRQ012 registers */
+#define SE7724_FPGA_IRQ_BASE 220
+
+/* IRQ0 */
+#define IRQ0_BASE SE7724_FPGA_IRQ_BASE
+#define IRQ0_KEY (IRQ0_BASE + 12)
+#define IRQ0_RMII (IRQ0_BASE + 13)
+#define IRQ0_SMC (IRQ0_BASE + 14)
+#define IRQ0_MASK 0x7fff
+#define IRQ0_END IRQ0_SMC
+/* IRQ1 */
+#define IRQ1_BASE (IRQ0_END + 1)
+#define IRQ1_TS (IRQ1_BASE + 0)
+#define IRQ1_MASK 0x0001
+#define IRQ1_END IRQ1_TS
+/* IRQ2 */
+#define IRQ2_BASE (IRQ1_END + 1)
+#define IRQ2_USB0 (IRQ1_BASE + 0)
+#define IRQ2_USB1 (IRQ1_BASE + 1)
+#define IRQ2_MASK 0x0003
+#define IRQ2_END IRQ2_USB1
+
+#define SE7724_FPGA_IRQ_NR (IRQ2_END - IRQ0_BASE)
+
+/* arch/sh/boards/se/7724/irq.c */
+void init_se7724_IRQ(void);
+
+#define __IO_PREFIX se7724
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SE7724_H */
obj-y := debugtraps.o idle.o io.o io_generic.o irq.o \
machvec.o process_32.o ptrace_32.o setup.o signal_32.o \
- sys_sh.o sys_sh32.o syscalls_32.o time_32.o topology.o \
+ sys_sh.o sys_sh32.o syscalls_32.o time.o topology.o \
traps.o traps_32.o
-obj-y += cpu/ timers/
+obj-y += cpu/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_DUMP_CODE) += disassemble.o
obj-$(CONFIG_HIBERNATION) += swsusp.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
+
EXTRA_CFLAGS += -Werror
obj-y := debugtraps.o idle.o io.o io_generic.o irq.o machvec.o process_64.o \
ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
- syscalls_64.o time_64.o topology.o traps.o traps_64.o
+ syscalls_64.o time.o topology.o traps.o traps_64.o
-obj-y += cpu/ timers/
-obj-$(CONFIG_VSYSCALL) += vsyscall/
+obj-y += cpu/
obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += sh_ksyms_64.o module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
+obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
+
EXTRA_CFLAGS += -Werror
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o
+obj-$(CONFIG_SH_CLK_CPG) += clock-cpg.o
obj-y += irq/ init.o clock.o
--- /dev/null
+#include <linux/clk.h>
+#include <linux/compiler.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+
+static int sh_clk_mstp32_enable(struct clk *clk)
+{
+ __raw_writel(__raw_readl(clk->enable_reg) & ~(1 << clk->enable_bit),
+ clk->enable_reg);
+ return 0;
+}
+
+static void sh_clk_mstp32_disable(struct clk *clk)
+{
+ __raw_writel(__raw_readl(clk->enable_reg) | (1 << clk->enable_bit),
+ clk->enable_reg);
+}
+
+static struct clk_ops sh_clk_mstp32_clk_ops = {
+ .enable = sh_clk_mstp32_enable,
+ .disable = sh_clk_mstp32_disable,
+ .recalc = followparent_recalc,
+};
+
+int __init sh_clk_mstp32_register(struct clk *clks, int nr)
+{
+ struct clk *clkp;
+ int ret = 0;
+ int k;
+
+ for (k = 0; !ret && (k < nr); k++) {
+ clkp = clks + k;
+ clkp->ops = &sh_clk_mstp32_clk_ops;
+ ret |= clk_register(clkp);
+ }
+
+ return ret;
+}
+
+static unsigned long sh_clk_div4_recalc(struct clk *clk)
+{
+ struct clk_div_mult_table *table = clk->priv;
+ unsigned int idx;
+
+ clk_rate_table_build(clk, clk->freq_table, table->nr_divisors,
+ table, &clk->arch_flags);
+
+ idx = (__raw_readl(clk->enable_reg) >> clk->enable_bit) & 0x000f;
+
+ return clk->freq_table[idx].frequency;
+}
+
+static long sh_clk_div4_round_rate(struct clk *clk, unsigned long rate)
+{
+ return clk_rate_table_round(clk, clk->freq_table, rate);
+}
+
+static struct clk_ops sh_clk_div4_clk_ops = {
+ .recalc = sh_clk_div4_recalc,
+ .round_rate = sh_clk_div4_round_rate,
+};
+
+int __init sh_clk_div4_register(struct clk *clks, int nr,
+ struct clk_div_mult_table *table)
+{
+ struct clk *clkp;
+ void *freq_table;
+ int nr_divs = table->nr_divisors;
+ int freq_table_size = sizeof(struct cpufreq_frequency_table);
+ int ret = 0;
+ int k;
+
+ k = nr_divs + 1;
+ freq_table = alloc_bootmem(freq_table_size * nr * (nr_divs + 1));
+ if (!freq_table)
+ return -ENOMEM;
+
+ for (k = 0; !ret && (k < nr); k++) {
+ clkp = clks + k;
+
+ clkp->ops = &sh_clk_div4_clk_ops;
+ clkp->id = -1;
+ clkp->priv = table;
+
+ clkp->freq_table = freq_table + (k * freq_table_size);
+ clkp->freq_table[nr_divs].frequency = CPUFREQ_TABLE_END;
+
+ ret = clk_register(clkp);
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
+static struct clk master_clk = {
+ .name = "master_clk",
+ .flags = CLK_ENABLE_ON_INIT,
+ .rate = CONFIG_SH_PCLK_FREQ,
+};
+
+static struct clk peripheral_clk = {
+ .name = "peripheral_clk",
+ .parent = &master_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static struct clk bus_clk = {
+ .name = "bus_clk",
+ .parent = &master_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu_clk",
+ .parent = &master_clk,
+ .flags = CLK_ENABLE_ON_INIT,
+};
+
+/*
+ * The ordering of these clocks matters, do not change it.
+ */
+static struct clk *onchip_clocks[] = {
+ &master_clk,
+ &peripheral_clk,
+ &bus_clk,
+ &cpu_clk,
+};
+
+int __init __deprecated cpg_clk_init(void)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
+ struct clk *clk = onchip_clocks[i];
+ arch_init_clk_ops(&clk->ops, i);
+ if (clk->ops)
+ ret |= clk_register(clk);
+ }
+
+ return ret;
+}
+
+/*
+ * Placeholder for compatability, until the lazy CPUs do this
+ * on their own.
+ */
+int __init __weak arch_clk_init(void)
+{
+ return cpg_clk_init();
+}
+#endif /* CONFIG_SH_CPG_CLK_LEGACY */
/*
* arch/sh/kernel/cpu/clock.c - SuperH clock framework
*
- * Copyright (C) 2005, 2006, 2007 Paul Mundt
+ * Copyright (C) 2005 - 2009 Paul Mundt
*
* This clock framework is derived from the OMAP version by:
*
- * Copyright (C) 2004 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Nokia Corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
*
* Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
*
+ * With clkdev bits:
+ *
+ * Copyright (C) 2008 Russell King.
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/list.h>
-#include <linux/kref.h>
#include <linux/kobject.h>
#include <linux/sysdev.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
+#include <linux/debugfs.h>
+#include <linux/cpufreq.h>
#include <asm/clock.h>
-#include <asm/timer.h>
+#include <asm/machvec.h>
static LIST_HEAD(clock_list);
static DEFINE_SPINLOCK(clock_lock);
static DEFINE_MUTEX(clock_list_sem);
-/*
- * Each subtype is expected to define the init routines for these clocks,
- * as each subtype (or processor family) will have these clocks at the
- * very least. These are all provided through the CPG, which even some of
- * the more quirky parts (such as ST40, SH4-202, etc.) still have.
- *
- * The processor-specific code is expected to register any additional
- * clock sources that are of interest.
- */
-static struct clk master_clk = {
- .name = "master_clk",
- .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
- .rate = CONFIG_SH_PCLK_FREQ,
-};
+void clk_rate_table_build(struct clk *clk,
+ struct cpufreq_frequency_table *freq_table,
+ int nr_freqs,
+ struct clk_div_mult_table *src_table,
+ unsigned long *bitmap)
+{
+ unsigned long mult, div;
+ unsigned long freq;
+ int i;
-static struct clk module_clk = {
- .name = "module_clk",
- .parent = &master_clk,
- .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-};
+ for (i = 0; i < nr_freqs; i++) {
+ div = 1;
+ mult = 1;
-static struct clk bus_clk = {
- .name = "bus_clk",
- .parent = &master_clk,
- .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
-};
+ if (src_table->divisors && i < src_table->nr_divisors)
+ div = src_table->divisors[i];
-static struct clk cpu_clk = {
- .name = "cpu_clk",
- .parent = &master_clk,
- .flags = CLK_ALWAYS_ENABLED,
-};
+ if (src_table->multipliers && i < src_table->nr_multipliers)
+ mult = src_table->multipliers[i];
-/*
- * The ordering of these clocks matters, do not change it.
- */
-static struct clk *onchip_clocks[] = {
- &master_clk,
- &module_clk,
- &bus_clk,
- &cpu_clk,
-};
+ if (!div || !mult || (bitmap && !test_bit(i, bitmap)))
+ freq = CPUFREQ_ENTRY_INVALID;
+ else
+ freq = clk->parent->rate * mult / div;
-static void propagate_rate(struct clk *clk)
-{
- struct clk *clkp;
-
- list_for_each_entry(clkp, &clock_list, node) {
- if (likely(clkp->parent != clk))
- continue;
- if (likely(clkp->ops && clkp->ops->recalc))
- clkp->ops->recalc(clkp);
- if (unlikely(clkp->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clkp);
+ freq_table[i].index = i;
+ freq_table[i].frequency = freq;
}
+
+ /* Termination entry */
+ freq_table[i].index = i;
+ freq_table[i].frequency = CPUFREQ_TABLE_END;
}
-static int __clk_enable(struct clk *clk)
+long clk_rate_table_round(struct clk *clk,
+ struct cpufreq_frequency_table *freq_table,
+ unsigned long rate)
{
- /*
- * See if this is the first time we're enabling the clock, some
- * clocks that are always enabled still require "special"
- * initialization. This is especially true if the clock mode
- * changes and the clock needs to hunt for the proper set of
- * divisors to use before it can effectively recalc.
- */
- if (unlikely(atomic_read(&clk->kref.refcount) == 1))
- if (clk->ops && clk->ops->init)
- clk->ops->init(clk);
+ unsigned long rate_error, rate_error_prev = ~0UL;
+ unsigned long rate_best_fit = rate;
+ unsigned long highest, lowest;
+ int i;
- kref_get(&clk->kref);
+ highest = lowest = 0;
- if (clk->flags & CLK_ALWAYS_ENABLED)
- return 0;
+ for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ unsigned long freq = freq_table[i].frequency;
- if (likely(clk->ops && clk->ops->enable))
- clk->ops->enable(clk);
+ if (freq == CPUFREQ_ENTRY_INVALID)
+ continue;
- return 0;
+ if (freq > highest)
+ highest = freq;
+ if (freq < lowest)
+ lowest = freq;
+
+ rate_error = abs(freq - rate);
+ if (rate_error < rate_error_prev) {
+ rate_best_fit = freq;
+ rate_error_prev = rate_error;
+ }
+
+ if (rate_error == 0)
+ break;
+ }
+
+ if (rate >= highest)
+ rate_best_fit = highest;
+ if (rate <= lowest)
+ rate_best_fit = lowest;
+
+ return rate_best_fit;
}
-int clk_enable(struct clk *clk)
+/* Used for clocks that always have same value as the parent clock */
+unsigned long followparent_recalc(struct clk *clk)
{
- unsigned long flags;
- int ret;
-
- if (!clk)
- return -EINVAL;
+ return clk->parent ? clk->parent->rate : 0;
+}
- clk_enable(clk->parent);
+int clk_reparent(struct clk *child, struct clk *parent)
+{
+ list_del_init(&child->sibling);
+ if (parent)
+ list_add(&child->sibling, &parent->children);
+ child->parent = parent;
- spin_lock_irqsave(&clock_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
+ /* now do the debugfs renaming to reattach the child
+ to the proper parent */
- return ret;
+ return 0;
}
-EXPORT_SYMBOL_GPL(clk_enable);
-static void clk_kref_release(struct kref *kref)
+/* Propagate rate to children */
+void propagate_rate(struct clk *tclk)
{
- /* Nothing to do */
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &tclk->children, sibling) {
+ if (clkp->ops && clkp->ops->recalc)
+ clkp->rate = clkp->ops->recalc(clkp);
+
+ propagate_rate(clkp);
+ }
}
static void __clk_disable(struct clk *clk)
{
- int count = kref_put(&clk->kref, clk_kref_release);
-
- if (clk->flags & CLK_ALWAYS_ENABLED)
+ if (clk->usecount == 0) {
+ printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
return;
+ }
- if (!count) { /* count reaches zero, disable the clock */
+ if (!(--clk->usecount)) {
if (likely(clk->ops && clk->ops->disable))
clk->ops->disable(clk);
+ if (likely(clk->parent))
+ __clk_disable(clk->parent);
}
}
spin_lock_irqsave(&clock_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clock_lock, flags);
-
- clk_disable(clk->parent);
}
EXPORT_SYMBOL_GPL(clk_disable);
+static int __clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (clk->usecount++ == 0) {
+ if (clk->parent) {
+ ret = __clk_enable(clk->parent);
+ if (unlikely(ret))
+ goto err;
+ }
+
+ if (clk->ops && clk->ops->enable) {
+ ret = clk->ops->enable(clk);
+ if (ret) {
+ if (clk->parent)
+ __clk_disable(clk->parent);
+ goto err;
+ }
+ }
+ }
+
+ return ret;
+err:
+ clk->usecount--;
+ return ret;
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = __clk_enable(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_enable);
+
+static LIST_HEAD(root_clks);
+
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &root_clks, sibling) {
+ if (clkp->ops && clkp->ops->recalc)
+ clkp->rate = clkp->ops->recalc(clkp);
+ propagate_rate(clkp);
+ }
+}
+
int clk_register(struct clk *clk)
{
+ if (clk == NULL || IS_ERR(clk))
+ return -EINVAL;
+
+ /*
+ * trap out already registered clocks
+ */
+ if (clk->node.next || clk->node.prev)
+ return 0;
+
mutex_lock(&clock_list_sem);
- list_add(&clk->node, &clock_list);
- kref_init(&clk->kref);
+ INIT_LIST_HEAD(&clk->children);
+ clk->usecount = 0;
- mutex_unlock(&clock_list_sem);
+ if (clk->parent)
+ list_add(&clk->sibling, &clk->parent->children);
+ else
+ list_add(&clk->sibling, &root_clks);
- if (clk->flags & CLK_ALWAYS_ENABLED) {
- pr_debug( "Clock '%s' is ALWAYS_ENABLED\n", clk->name);
- if (clk->ops && clk->ops->init)
- clk->ops->init(clk);
- if (clk->ops && clk->ops->enable)
- clk->ops->enable(clk);
- pr_debug( "Enabled.");
- }
+ list_add(&clk->node, &clock_list);
+ if (clk->ops && clk->ops->init)
+ clk->ops->init(clk);
+ mutex_unlock(&clock_list_sem);
return 0;
}
void clk_unregister(struct clk *clk)
{
mutex_lock(&clock_list_sem);
+ list_del(&clk->sibling);
list_del(&clk->node);
mutex_unlock(&clock_list_sem);
}
EXPORT_SYMBOL_GPL(clk_unregister);
+static void clk_enable_init_clocks(void)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clock_list, node)
+ if (clkp->flags & CLK_ENABLE_ON_INIT)
+ clk_enable(clkp);
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
return clk->rate;
int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
{
int ret = -EOPNOTSUPP;
+ unsigned long flags;
- if (likely(clk->ops && clk->ops->set_rate)) {
- unsigned long flags;
+ spin_lock_irqsave(&clock_lock, flags);
- spin_lock_irqsave(&clock_lock, flags);
+ if (likely(clk->ops && clk->ops->set_rate)) {
ret = clk->ops->set_rate(clk, rate, algo_id);
- spin_unlock_irqrestore(&clock_lock, flags);
+ if (ret != 0)
+ goto out_unlock;
+ } else {
+ clk->rate = rate;
+ ret = 0;
}
- if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clk);
+ if (clk->ops && clk->ops->recalc)
+ clk->rate = clk->ops->recalc(clk);
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
-
-void clk_recalc_rate(struct clk *clk)
-{
- if (likely(clk->ops && clk->ops->recalc)) {
- unsigned long flags;
+ propagate_rate(clk);
- spin_lock_irqsave(&clock_lock, flags);
- clk->ops->recalc(clk);
- spin_unlock_irqrestore(&clock_lock, flags);
- }
+out_unlock:
+ spin_unlock_irqrestore(&clock_lock, flags);
- if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clk);
+ return ret;
}
-EXPORT_SYMBOL_GPL(clk_recalc_rate);
+EXPORT_SYMBOL_GPL(clk_set_rate_ex);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
+ unsigned long flags;
int ret = -EINVAL;
- struct clk *old;
if (!parent || !clk)
return ret;
+ if (clk->parent == parent)
+ return 0;
- old = clk->parent;
- if (likely(clk->ops && clk->ops->set_parent)) {
- unsigned long flags;
- spin_lock_irqsave(&clock_lock, flags);
- ret = clk->ops->set_parent(clk, parent);
- spin_unlock_irqrestore(&clock_lock, flags);
- clk->parent = (ret ? old : parent);
- }
+ spin_lock_irqsave(&clock_lock, flags);
+ if (clk->usecount == 0) {
+ if (clk->ops->set_parent)
+ ret = clk->ops->set_parent(clk, parent);
+ else
+ ret = clk_reparent(clk, parent);
+
+ if (ret == 0) {
+ pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+ clk->name, clk->parent->name, clk->rate);
+ if (clk->ops->recalc)
+ clk->rate = clk->ops->recalc(clk);
+ propagate_rate(clk);
+ }
+ } else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&clock_lock, flags);
- if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
- propagate_rate(clk);
return ret;
}
EXPORT_SYMBOL_GPL(clk_set_parent);
}
EXPORT_SYMBOL_GPL(clk_round_rate);
+/*
+ * Find the correct struct clk for the device and connection ID.
+ * We do slightly fuzzy matching here:
+ * An entry with a NULL ID is assumed to be a wildcard.
+ * If an entry has a device ID, it must match
+ * If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following
+ * order of precidence: dev+con > dev only > con only.
+ */
+static struct clk *clk_find(const char *dev_id, const char *con_id)
+{
+ struct clk_lookup *p;
+ struct clk *clk = NULL;
+ int match, best = 0;
+
+ list_for_each_entry(p, &clock_list, node) {
+ match = 0;
+ if (p->dev_id) {
+ if (!dev_id || strcmp(p->dev_id, dev_id))
+ continue;
+ match += 2;
+ }
+ if (p->con_id) {
+ if (!con_id || strcmp(p->con_id, con_id))
+ continue;
+ match += 1;
+ }
+ if (match == 0)
+ continue;
+
+ if (match > best) {
+ clk = p->clk;
+ best = match;
+ }
+ }
+ return clk;
+}
+
+struct clk *clk_get_sys(const char *dev_id, const char *con_id)
+{
+ struct clk *clk;
+
+ mutex_lock(&clock_list_sem);
+ clk = clk_find(dev_id, con_id);
+ mutex_unlock(&clock_list_sem);
+
+ return clk ? clk : ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL_GPL(clk_get_sys);
+
/*
* Returns a clock. Note that we first try to use device id on the bus
* and clock name. If this fails, we try to use clock name only.
*/
struct clk *clk_get(struct device *dev, const char *id)
{
+ const char *dev_id = dev ? dev_name(dev) : NULL;
struct clk *p, *clk = ERR_PTR(-ENOENT);
int idno;
+ clk = clk_get_sys(dev_id, id);
+ if (clk && !IS_ERR(clk))
+ return clk;
+
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
}
EXPORT_SYMBOL_GPL(clk_put);
-void __init __attribute__ ((weak))
-arch_init_clk_ops(struct clk_ops **ops, int type)
-{
-}
-
-int __init __attribute__ ((weak))
-arch_clk_init(void)
-{
- return 0;
-}
-
-static int show_clocks(char *buf, char **start, off_t off,
- int len, int *eof, void *data)
-{
- struct clk *clk;
- char *p = buf;
-
- list_for_each_entry_reverse(clk, &clock_list, node) {
- unsigned long rate = clk_get_rate(clk);
-
- p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
- rate / 1000000, (rate % 1000000) / 10000,
- ((clk->flags & CLK_ALWAYS_ENABLED) ||
- (atomic_read(&clk->kref.refcount) != 1)) ?
- "enabled" : "disabled");
- }
-
- return p - buf;
-}
-
#ifdef CONFIG_PM
static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
{
switch (state.event) {
case PM_EVENT_ON:
/* Resumeing from hibernation */
- if (prev_state.event == PM_EVENT_FREEZE) {
- list_for_each_entry(clkp, &clock_list, node)
- if (likely(clkp->ops)) {
- unsigned long rate = clkp->rate;
-
- if (likely(clkp->ops->set_parent))
- clkp->ops->set_parent(clkp,
- clkp->parent);
- if (likely(clkp->ops->set_rate))
- clkp->ops->set_rate(clkp,
- rate, NO_CHANGE);
- else if (likely(clkp->ops->recalc))
- clkp->ops->recalc(clkp);
- }
+ if (prev_state.event != PM_EVENT_FREEZE)
+ break;
+
+ list_for_each_entry(clkp, &clock_list, node) {
+ if (likely(clkp->ops)) {
+ unsigned long rate = clkp->rate;
+
+ if (likely(clkp->ops->set_parent))
+ clkp->ops->set_parent(clkp,
+ clkp->parent);
+ if (likely(clkp->ops->set_rate))
+ clkp->ops->set_rate(clkp,
+ rate, NO_CHANGE);
+ else if (likely(clkp->ops->recalc))
+ clkp->rate = clkp->ops->recalc(clkp);
+ }
}
break;
case PM_EVENT_FREEZE:
int __init clk_init(void)
{
- int i, ret = 0;
-
- BUG_ON(!master_clk.rate);
-
- for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
- struct clk *clk = onchip_clocks[i];
+ int ret;
- arch_init_clk_ops(&clk->ops, i);
- ret |= clk_register(clk);
+ ret = arch_clk_init();
+ if (unlikely(ret)) {
+ pr_err("%s: CPU clock registration failed.\n", __func__);
+ return ret;
}
- ret |= arch_clk_init();
+ if (sh_mv.mv_clk_init) {
+ ret = sh_mv.mv_clk_init();
+ if (unlikely(ret)) {
+ pr_err("%s: machvec clock initialization failed.\n",
+ __func__);
+ return ret;
+ }
+ }
/* Kick the child clocks.. */
- propagate_rate(&master_clk);
- propagate_rate(&bus_clk);
+ recalculate_root_clocks();
+
+ /* Enable the necessary init clocks */
+ clk_enable_init_clocks();
return ret;
}
-static int __init clk_proc_init(void)
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+
+static int clk_debugfs_register_one(struct clk *c)
{
- struct proc_dir_entry *p;
- p = create_proc_read_entry("clocks", S_IRUSR, NULL,
- show_clocks, NULL);
- if (unlikely(!p))
- return -EINVAL;
+ int err;
+ struct dentry *d, *child;
+ struct clk *pa = c->parent;
+ char s[255];
+ char *p = s;
+
+ p += sprintf(p, "%s", c->name);
+ if (c->id >= 0)
+ sprintf(p, ":%d", c->id);
+ d = debugfs_create_dir(s, pa ? pa->dentry : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dentry = d;
+
+ d = debugfs_create_u8("usecount", S_IRUGO, c->dentry, (u8 *)&c->usecount);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dentry, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dentry, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+err_out:
+ d = c->dentry;
+ list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(c->dentry);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent;
+
+ if (pa && !pa->dentry) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dentry) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clock_list, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
return 0;
+err_out:
+ debugfs_remove(clk_debugfs_root); /* REVISIT: Cleanup correctly */
+ return err;
}
-subsys_initcall(clk_proc_init);
+late_initcall(clk_debugfs_init);
#define speculative_execution_init() do { } while (0)
#endif
+/* 2nd-level cache init */
+void __uses_jump_to_uncached __attribute__ ((weak)) l2_cache_init(void)
+{
+}
+
/*
* Generic first-level cache init
*/
flags &= ~CCR_CACHE_ENABLE;
#endif
+ l2_cache_init();
+
ctrl_outl(flags, CCR);
back_to_cached();
}
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/irq.h>
+#include <linux/bitmap.h>
#include <asm/system.h>
#include <asm/irq.h>
/* Bitmap of IRQ masked */
-static unsigned long imask_mask = 0x7fff;
-static int interrupt_priority = 0;
-
-static void enable_imask_irq(unsigned int irq);
-static void disable_imask_irq(unsigned int irq);
-static void shutdown_imask_irq(unsigned int irq);
-static void mask_and_ack_imask(unsigned int);
-static void end_imask_irq(unsigned int irq);
-
#define IMASK_PRIORITY 15
-static unsigned int startup_imask_irq(unsigned int irq)
-{
- /* Nothing to do */
- return 0; /* never anything pending */
-}
+static DECLARE_BITMAP(imask_mask, IMASK_PRIORITY);
+static int interrupt_priority;
-static struct hw_interrupt_type imask_irq_type = {
- .typename = "SR.IMASK",
- .startup = startup_imask_irq,
- .shutdown = shutdown_imask_irq,
- .enable = enable_imask_irq,
- .disable = disable_imask_irq,
- .ack = mask_and_ack_imask,
- .end = end_imask_irq
-};
-
-void static inline set_interrupt_registers(int ip)
+static inline void set_interrupt_registers(int ip)
{
unsigned long __dummy;
: "t");
}
-static void disable_imask_irq(unsigned int irq)
+static void mask_imask_irq(unsigned int irq)
{
- clear_bit(irq, &imask_mask);
+ clear_bit(irq, imask_mask);
if (interrupt_priority < IMASK_PRIORITY - irq)
interrupt_priority = IMASK_PRIORITY - irq;
-
set_interrupt_registers(interrupt_priority);
}
-static void enable_imask_irq(unsigned int irq)
+static void unmask_imask_irq(unsigned int irq)
{
- set_bit(irq, &imask_mask);
- interrupt_priority = IMASK_PRIORITY - ffz(imask_mask);
-
+ set_bit(irq, imask_mask);
+ interrupt_priority = IMASK_PRIORITY -
+ find_first_zero_bit(imask_mask, IMASK_PRIORITY);
set_interrupt_registers(interrupt_priority);
}
-static void mask_and_ack_imask(unsigned int irq)
-{
- disable_imask_irq(irq);
-}
-
-static void end_imask_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_imask_irq(irq);
-}
-
-static void shutdown_imask_irq(unsigned int irq)
-{
- /* Nothing to do */
-}
+static struct irq_chip imask_irq_chip = {
+ .typename = "SR.IMASK",
+ .mask = mask_imask_irq,
+ .unmask = unmask_imask_irq,
+ .mask_ack = mask_imask_irq,
+};
void make_imask_irq(unsigned int irq)
{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &imask_irq_type;
- enable_irq(irq);
+ set_irq_chip_and_handler_name(irq, &imask_irq_chip,
+ handle_level_irq, "level");
}
static void mask_and_ack_intc(unsigned int);
static void end_intc_irq(unsigned int irq);
-static struct hw_interrupt_type intc_irq_type = {
+static struct irq_chip intc_irq_type = {
.typename = "INTC",
.startup = startup_intc_irq,
.shutdown = shutdown_intc_irq,
enable_intc_irq(irq);
}
-/* For future use, if we ever support IRLM=0) */
-void make_intc_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &intc_irq_type;
- disable_intc_irq(irq);
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-static int IRQ_to_vectorN[NR_INTC_IRQS] = {
- 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */
- -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */
- 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */
- 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */
- 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */
- -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */
- -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */
-
-};
-
-int intc_irq_describe(char* p, int irq)
-{
- if (irq < NR_INTC_IRQS)
- return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20);
- else
- return 0;
-}
-#endif
-
void __init plat_irq_setup(void)
{
unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
unsigned long reg;
int i;
- intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
+ intc_virt = (unsigned long)ioremap_nocache(INTC_BASE, 1024);
if (!intc_virt) {
panic("Unable to remap INTC\n");
}
/* Set default: per-line enable/disable, priority driven ack/eoi */
for (i = 0; i < NR_INTC_IRQS; i++)
- irq_desc[i].chip = &intc_irq_type;
+ set_irq_chip_and_handler(i, &intc_irq_type, handle_level_irq);
/* Disable all interrupts and set all priorities to 0 to avoid trouble */
for (i = 0; i < desc->nr_irqs; i++) {
struct ipr_data *p = desc->ipr_data + i;
+#ifdef CONFIG_SPARSE_IRQ
+ struct irq_desc *irq_desc;
+#endif
BUG_ON(p->ipr_idx >= desc->nr_offsets);
BUG_ON(!desc->ipr_offsets[p->ipr_idx]);
+#ifdef CONFIG_SPARSE_IRQ
+ irq_desc = irq_to_desc_alloc_cpu(p->irq, smp_processor_id());
+ if (unlikely(!irq_desc)) {
+ printk(KERN_INFO "can not get irq_desc for %d\n",
+ p->irq);
+ continue;
+ }
+#endif
+
disable_irq_nosync(p->irq);
set_irq_chip_and_handler_name(p->irq, &desc->chip,
handle_level_irq, "level");
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7619_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
+ return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 7];
}
static struct clk_ops sh7619_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
-{
- clk->rate = clk->parent->rate;
-}
-
static struct clk_ops sh7619_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
+ .recalc = followparent_recalc,
};
static struct clk_ops *sh7619_clk_ops[] = {
if (idx < ARRAY_SIZE(sh7619_clk_ops))
*ops = sh7619_clk_ops[idx];
}
-
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
enum {
UNUSED = 0,
.resource = eth_resources,
};
+static struct sh_timer_config cmt0_platform_data = {
+ .name = "CMT0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+ [0] = {
+ .name = "CMT0",
+ .start = 0xf84a0072,
+ .end = 0xf84a0077,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 86,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt0_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt0_platform_data,
+ },
+ .resource = cmt0_resources,
+ .num_resources = ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+ .name = "CMT1",
+ .channel_offset = 0x08,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+ [0] = {
+ .name = "CMT1",
+ .start = 0xf84a0078,
+ .end = 0xf84a007d,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 87,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt1_device = {
+ .name = "sh_cmt",
+ .id = 1,
+ .dev = {
+ .platform_data = &cmt1_platform_data,
+ },
+ .resource = cmt1_resources,
+ .num_resources = ARRAY_SIZE(cmt1_resources),
+};
+
static struct platform_device *sh7619_devices[] __initdata = {
&sci_device,
ð_device,
+ &cmt0_device,
+ &cmt1_device,
};
static int __init sh7619_devices_setup(void)
{
register_intc_controller(&intc_desc);
}
+
+static struct platform_device *sh7619_early_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+};
+
+#define STBCR3 0xf80a0000
+
+void __init plat_early_device_setup(void)
+{
+ /* enable CMT clock */
+ __raw_writeb(__raw_readb(STBCR3) & ~0x10, STBCR3);
+
+ early_platform_add_devices(sh7619_early_devices,
+ ARRAY_SIZE(sh7619_early_devices));
+}
static void master_clk_init(struct clk *clk)
{
- clk->rate = 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+ return 10000000 * PLL2 * pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7201_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7201_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inw(FREQCR) >> 4) & 0x0007);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7201_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7203_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx-2];
+ return clk->parent->rate / pfc_divisors[idx-2];
}
static struct clk_ops sh7203_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
-{
- clk->rate = clk->parent->rate;
-}
-
static struct clk_ops sh7203_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
+ .recalc = followparent_recalc,
};
static struct clk_ops *sh7203_clk_ops[] = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7206_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
- clk->rate = clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
+ return clk->parent->rate / pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7206_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7206_cpu_clk_ops = {
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
enum {
UNUSED = 0,
SCIF0, SCIF1,
- MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+ MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5,
MTU2_TGI3B, MTU2_TGI3C,
/* interrupt groups */
static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
mask_registers, prio_registers, NULL);
+static struct sh_timer_config mtu2_0_platform_data = {
+ .name = "MTU2_0",
+ .channel_offset = -0x80,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+ [0] = {
+ .name = "MTU2_0",
+ .start = 0xff801300,
+ .end = 0xff801326,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 228,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_0_device = {
+ .name = "sh_mtu2",
+ .id = 0,
+ .dev = {
+ .platform_data = &mtu2_0_platform_data,
+ },
+ .resource = mtu2_0_resources,
+ .num_resources = ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+ .name = "MTU2_1",
+ .channel_offset = -0x100,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+ [0] = {
+ .name = "MTU2_1",
+ .start = 0xff801380,
+ .end = 0xff801390,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 234,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_1_device = {
+ .name = "sh_mtu2",
+ .id = 1,
+ .dev = {
+ .platform_data = &mtu2_1_platform_data,
+ },
+ .resource = mtu2_1_resources,
+ .num_resources = ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+ .name = "MTU2_2",
+ .channel_offset = 0x80,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+ [0] = {
+ .name = "MTU2_2",
+ .start = 0xff801000,
+ .end = 0xff80100a,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 240,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_2_device = {
+ .name = "sh_mtu2",
+ .id = 2,
+ .dev = {
+ .platform_data = &mtu2_2_platform_data,
+ },
+ .resource = mtu2_2_resources,
+ .num_resources = ARRAY_SIZE(mtu2_2_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xff804000,
static struct platform_device *mxg_devices[] __initdata = {
&sci_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
};
static int __init mxg_devices_setup(void)
{
register_intc_controller(&intc_desc);
}
+
+static struct platform_device *mxg_early_devices[] __initdata = {
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(mxg_early_devices,
+ ARRAY_SIZE(mxg_early_devices));
+}
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
enum {
UNUSED = 0,
.resource = rtc_resources,
};
+static struct sh_timer_config mtu2_0_platform_data = {
+ .name = "MTU2_0",
+ .channel_offset = -0x80,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+ [0] = {
+ .name = "MTU2_0",
+ .start = 0xfffe4300,
+ .end = 0xfffe4326,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 108,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_0_device = {
+ .name = "sh_mtu2",
+ .id = 0,
+ .dev = {
+ .platform_data = &mtu2_0_platform_data,
+ },
+ .resource = mtu2_0_resources,
+ .num_resources = ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+ .name = "MTU2_1",
+ .channel_offset = -0x100,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+ [0] = {
+ .name = "MTU2_1",
+ .start = 0xfffe4380,
+ .end = 0xfffe4390,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 116,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_1_device = {
+ .name = "sh_mtu2",
+ .id = 1,
+ .dev = {
+ .platform_data = &mtu2_1_platform_data,
+ },
+ .resource = mtu2_1_resources,
+ .num_resources = ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+ .name = "MTU2_2",
+ .channel_offset = 0x80,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+ [0] = {
+ .name = "MTU2_2",
+ .start = 0xfffe4000,
+ .end = 0xfffe400a,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 124,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_2_device = {
+ .name = "sh_mtu2",
+ .id = 2,
+ .dev = {
+ .platform_data = &mtu2_2_platform_data,
+ },
+ .resource = mtu2_2_resources,
+ .num_resources = ARRAY_SIZE(mtu2_2_resources),
+};
+
static struct platform_device *sh7201_devices[] __initdata = {
&sci_device,
&rtc_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
};
static int __init sh7201_devices_setup(void)
{
register_intc_controller(&intc_desc);
}
+
+static struct platform_device *sh7201_early_devices[] __initdata = {
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
+};
+
+#define STBCR3 0xfffe0408
+
+void __init plat_early_device_setup(void)
+{
+ /* enable MTU2 clock */
+ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+ early_platform_add_devices(sh7201_early_devices,
+ ARRAY_SIZE(sh7201_early_devices));
+}
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
enum {
UNUSED = 0,
},
};
+static struct sh_timer_config cmt0_platform_data = {
+ .name = "CMT0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+ [0] = {
+ .name = "CMT0",
+ .start = 0xfffec002,
+ .end = 0xfffec007,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 142,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt0_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt0_platform_data,
+ },
+ .resource = cmt0_resources,
+ .num_resources = ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+ .name = "CMT1",
+ .channel_offset = 0x08,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+ [0] = {
+ .name = "CMT1",
+ .start = 0xfffec008,
+ .end = 0xfffec00d,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 143,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt1_device = {
+ .name = "sh_cmt",
+ .id = 1,
+ .dev = {
+ .platform_data = &cmt1_platform_data,
+ },
+ .resource = cmt1_resources,
+ .num_resources = ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config mtu2_0_platform_data = {
+ .name = "MTU2_0",
+ .channel_offset = -0x80,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+ [0] = {
+ .name = "MTU2_0",
+ .start = 0xfffe4300,
+ .end = 0xfffe4326,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 146,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_0_device = {
+ .name = "sh_mtu2",
+ .id = 0,
+ .dev = {
+ .platform_data = &mtu2_0_platform_data,
+ },
+ .resource = mtu2_0_resources,
+ .num_resources = ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+ .name = "MTU2_1",
+ .channel_offset = -0x100,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+ [0] = {
+ .name = "MTU2_1",
+ .start = 0xfffe4380,
+ .end = 0xfffe4390,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 153,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_1_device = {
+ .name = "sh_mtu2",
+ .id = 1,
+ .dev = {
+ .platform_data = &mtu2_1_platform_data,
+ },
+ .resource = mtu2_1_resources,
+ .num_resources = ARRAY_SIZE(mtu2_1_resources),
+};
+
static struct resource rtc_resources[] = {
[0] = {
.start = 0xffff2000,
static struct platform_device *sh7203_devices[] __initdata = {
&sci_device,
+ &cmt0_device,
+ &cmt1_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
&rtc_device,
};
{
register_intc_controller(&intc_desc);
}
+
+static struct platform_device *sh7203_early_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+ /* enable CMT clock */
+ __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+ /* enable MTU2 clock */
+ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+ early_platform_add_devices(sh7203_early_devices,
+ ARRAY_SIZE(sh7203_early_devices));
+}
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
enum {
UNUSED = 0,
},
};
+static struct sh_timer_config cmt0_platform_data = {
+ .name = "CMT0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt0_resources[] = {
+ [0] = {
+ .name = "CMT0",
+ .start = 0xfffec002,
+ .end = 0xfffec007,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 140,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt0_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt0_platform_data,
+ },
+ .resource = cmt0_resources,
+ .num_resources = ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+ .name = "CMT1",
+ .channel_offset = 0x08,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 0, /* disabled due to code generation issues */
+};
+
+static struct resource cmt1_resources[] = {
+ [0] = {
+ .name = "CMT1",
+ .start = 0xfffec008,
+ .end = 0xfffec00d,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 144,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt1_device = {
+ .name = "sh_cmt",
+ .id = 1,
+ .dev = {
+ .platform_data = &cmt1_platform_data,
+ },
+ .resource = cmt1_resources,
+ .num_resources = ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config mtu2_0_platform_data = {
+ .name = "MTU2_0",
+ .channel_offset = -0x80,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_0_resources[] = {
+ [0] = {
+ .name = "MTU2_0",
+ .start = 0xfffe4300,
+ .end = 0xfffe4326,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 156,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_0_device = {
+ .name = "sh_mtu2",
+ .id = 0,
+ .dev = {
+ .platform_data = &mtu2_0_platform_data,
+ },
+ .resource = mtu2_0_resources,
+ .num_resources = ARRAY_SIZE(mtu2_0_resources),
+};
+
+static struct sh_timer_config mtu2_1_platform_data = {
+ .name = "MTU2_1",
+ .channel_offset = -0x100,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_1_resources[] = {
+ [0] = {
+ .name = "MTU2_1",
+ .start = 0xfffe4380,
+ .end = 0xfffe4390,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 164,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_1_device = {
+ .name = "sh_mtu2",
+ .id = 1,
+ .dev = {
+ .platform_data = &mtu2_1_platform_data,
+ },
+ .resource = mtu2_1_resources,
+ .num_resources = ARRAY_SIZE(mtu2_1_resources),
+};
+
+static struct sh_timer_config mtu2_2_platform_data = {
+ .name = "MTU2_2",
+ .channel_offset = 0x80,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource mtu2_2_resources[] = {
+ [0] = {
+ .name = "MTU2_2",
+ .start = 0xfffe4000,
+ .end = 0xfffe400a,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 180,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mtu2_2_device = {
+ .name = "sh_mtu2",
+ .id = 2,
+ .dev = {
+ .platform_data = &mtu2_2_platform_data,
+ },
+ .resource = mtu2_2_resources,
+ .num_resources = ARRAY_SIZE(mtu2_2_resources),
+};
+
static struct platform_device *sh7206_devices[] __initdata = {
&sci_device,
+ &cmt0_device,
+ &cmt1_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
};
static int __init sh7206_devices_setup(void)
{
register_intc_controller(&intc_desc);
}
+
+static struct platform_device *sh7206_early_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &mtu2_0_device,
+ &mtu2_1_device,
+ &mtu2_2_device,
+};
+
+#define STBCR3 0xfffe0408
+#define STBCR4 0xfffe040c
+
+void __init plat_early_device_setup(void)
+{
+ /* enable CMT clock */
+ __raw_writeb(__raw_readb(STBCR4) & ~0x04, STBCR4);
+
+ /* enable MTU2 clock */
+ __raw_writeb(__raw_readb(STBCR3) & ~0x20, STBCR3);
+
+ early_platform_add_devices(sh7206_early_devices,
+ ARRAY_SIZE(sh7206_early_devices));
+}
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh3_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
- clk->rate = clk->parent->rate / stc_multipliers[idx];
+ return clk->parent->rate / stc_multipliers[idx];
}
static struct clk_ops sh3_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh3_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ctrl_inw(FRQCR) & 0x0003;
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7705_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
- clk->rate = clk->parent->rate / stc_multipliers[idx];
+ return clk->parent->rate / stc_multipliers[idx];
}
static struct clk_ops sh7705_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7705_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7706_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
- clk->rate = clk->parent->rate / stc_multipliers[idx];
+ return clk->parent->rate / stc_multipliers[idx];
}
static struct clk_ops sh7706_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7706_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7709_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = (frqcr & 0x0080) ?
((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
- clk->rate = clk->parent->rate * stc_multipliers[idx];
+ return clk->parent->rate * stc_multipliers[idx];
}
static struct clk_ops sh7709_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7709_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0007);
- clk->rate = clk->parent->rate / md_table[idx];
+ return clk->parent->rate / md_table[idx];
}
static struct clk_ops sh7710_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
- clk->rate = clk->parent->rate / md_table[idx];
+ return clk->parent->rate / md_table[idx];
}
static struct clk_ops sh7710_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
- clk->rate = clk->parent->rate / md_table[idx];
+ return clk->parent->rate / md_table[idx];
}
static struct clk_ops sh7710_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = frqcr & 0x0007;
- clk->rate = clk->parent->rate / divisors[idx];
+ return clk->parent->rate / divisors[idx];
}
static struct clk_ops sh7712_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int frqcr = ctrl_inw(FRQCR);
int idx = (frqcr & 0x0030) >> 4;
- clk->rate = clk->parent->rate / divisors[idx];
+ return clk->parent->rate / divisors[idx];
}
static struct clk_ops sh7712_cpu_clk_ops = {
#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <asm/rtc.h>
enum {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xfffffe94,
+ .end = 0xfffffe9f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0xe,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xfffffea0,
+ .end = 0xfffffeab,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1a,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xfffffeac,
+ .end = 0xfffffebb,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct platform_device *sh7705_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&sci_device,
&rtc_device,
};
}
__initcall(sh7705_devices_setup);
+static struct platform_device *sh7705_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7705_early_devices,
+ ARRAY_SIZE(sh7705_early_devices));
+}
+
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
enum {
UNUSED = 0,
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xfffffe94,
+ .end = 0xfffffe9f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0xe,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xfffffea0,
+ .end = 0xfffffeab,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1a,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xfffffeac,
+ .end = 0xfffffebb,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct platform_device *sh770x_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&sci_device,
&rtc_device,
};
}
__initcall(sh770x_devices_setup);
+static struct platform_device *sh770x_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh770x_early_devices,
+ ARRAY_SIZE(sh770x_early_devices));
+}
+
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
#include <linux/irq.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <asm/rtc.h>
enum {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xa412fe94,
+ .end = 0xa412fe9f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0xe,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xa412fea0,
+ .end = 0xa412feab,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1a,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xa412feac,
+ .end = 0xa412feb5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct platform_device *sh7710_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&sci_device,
&rtc_device,
};
}
__initcall(sh7710_devices_setup);
+static struct platform_device *sh7710_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7710_early_devices,
+ ARRAY_SIZE(sh7710_early_devices));
+}
+
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
#include <asm/rtc.h>
static struct resource rtc_resources[] = {
.resource = usbf_resources,
};
+static struct sh_timer_config cmt0_platform_data = {
+ .name = "CMT0",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt0_resources[] = {
+ [0] = {
+ .name = "CMT0",
+ .start = 0x044a0010,
+ .end = 0x044a001b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt0_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt0_platform_data,
+ },
+ .resource = cmt0_resources,
+ .num_resources = ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+ .name = "CMT1",
+ .channel_offset = 0x20,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource cmt1_resources[] = {
+ [0] = {
+ .name = "CMT1",
+ .start = 0x044a0020,
+ .end = 0x044a002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt1_device = {
+ .name = "sh_cmt",
+ .id = 1,
+ .dev = {
+ .platform_data = &cmt1_platform_data,
+ },
+ .resource = cmt1_resources,
+ .num_resources = ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config cmt2_platform_data = {
+ .name = "CMT2",
+ .channel_offset = 0x30,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource cmt2_resources[] = {
+ [0] = {
+ .name = "CMT2",
+ .start = 0x044a0030,
+ .end = 0x044a003b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt2_device = {
+ .name = "sh_cmt",
+ .id = 2,
+ .dev = {
+ .platform_data = &cmt2_platform_data,
+ },
+ .resource = cmt2_resources,
+ .num_resources = ARRAY_SIZE(cmt2_resources),
+};
+
+static struct sh_timer_config cmt3_platform_data = {
+ .name = "CMT3",
+ .channel_offset = 0x40,
+ .timer_bit = 3,
+ .clk = "peripheral_clk",
+};
+
+static struct resource cmt3_resources[] = {
+ [0] = {
+ .name = "CMT3",
+ .start = 0x044a0040,
+ .end = 0x044a004b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt3_device = {
+ .name = "sh_cmt",
+ .id = 3,
+ .dev = {
+ .platform_data = &cmt3_platform_data,
+ },
+ .resource = cmt3_resources,
+ .num_resources = ARRAY_SIZE(cmt3_resources),
+};
+
+static struct sh_timer_config cmt4_platform_data = {
+ .name = "CMT4",
+ .channel_offset = 0x50,
+ .timer_bit = 4,
+ .clk = "peripheral_clk",
+};
+
+static struct resource cmt4_resources[] = {
+ [0] = {
+ .name = "CMT4",
+ .start = 0x044a0050,
+ .end = 0x044a005b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt4_device = {
+ .name = "sh_cmt",
+ .id = 4,
+ .dev = {
+ .platform_data = &cmt4_platform_data,
+ },
+ .resource = cmt4_resources,
+ .num_resources = ARRAY_SIZE(cmt4_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x02,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xa412fe94,
+ .end = 0xa412fe9f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0xe,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xa412fea0,
+ .end = 0xa412feab,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1a,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xa412feac,
+ .end = 0xa412feb5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct platform_device *sh7720_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &cmt2_device,
+ &cmt3_device,
+ &cmt4_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&rtc_device,
&sci_device,
&usb_ohci_device,
}
__initcall(sh7720_devices_setup);
+static struct platform_device *sh7720_early_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &cmt2_device,
+ &cmt3_device,
+ &cmt4_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7720_early_devices,
+ ARRAY_SIZE(sh7720_early_devices));
+}
+
enum {
UNUSED = 0,
static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
-static void emi_clk_recalc(struct clk *clk)
+static unsigned long emi_clk_recalc(struct clk *clk)
{
int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
- clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+ return clk->parent->rate / frqcr3_divisors[idx];
}
static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
static struct clk sh4202_emi_clk = {
.name = "emi_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh4202_emi_clk_ops,
};
-static void femi_clk_recalc(struct clk *clk)
+static unsigned long femi_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
- clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+ return clk->parent->rate / frqcr3_divisors[idx];
}
static struct clk_ops sh4202_femi_clk_ops = {
static struct clk sh4202_femi_clk = {
.name = "femi_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh4202_femi_clk_ops,
};
WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
}
-static void shoc_clk_recalc(struct clk *clk)
+static unsigned long shoc_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
- clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+ return clk->parent->rate / frqcr3_divisors[idx];
}
static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
static struct clk sh4202_shoc_clk = {
.name = "shoc_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh4202_shoc_clk_ops,
};
&sh4202_shoc_clk,
};
-static int __init sh4202_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
+ struct clk *clk;
+ int i, ret = 0;
+
+ cpg_clk_init();
+ clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
struct clk *clkp = sh4202_onchip_clocks[i];
clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
+ ret |= clk_register(clkp);
}
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
-
clk_put(clk);
- return 0;
+ return ret;
}
-
-arch_initcall(sh4202_clk_init);
-
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) & 0x0007);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh4_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh4_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh4_cpu_clk_ops = {
if ((cvr & 0x10000000) == 0)
boot_cpu_data.flags |= CPU_HAS_DSP;
- boot_cpu_data.flags |= CPU_HAS_LLSC;
+ boot_cpu_data.flags |= CPU_HAS_LLSC | CPU_HAS_PERF_COUNTER;
boot_cpu_data.cut_major = pvr & 0x7f;
+
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ } else {
+ /* And some SH-4 defaults.. */
+ boot_cpu_data.flags |= CPU_HAS_PTEA;
}
/* FPU detection works for everyone */
- if ((cvr & 0x20000000) == 1)
+ if ((cvr & 0x20000000))
boot_cpu_data.flags |= CPU_HAS_FPU;
/* Mask off the upper chip ID */
switch (pvr) {
case 0x205:
boot_cpu_data.type = CPU_SH7750;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
- CPU_HAS_PERF_COUNTER;
+ boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+ CPU_HAS_PERF_COUNTER;
break;
case 0x206:
boot_cpu_data.type = CPU_SH7750S;
- boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG | CPU_HAS_FPU |
- CPU_HAS_PERF_COUNTER;
+ boot_cpu_data.flags |= CPU_HAS_P2_FLUSH_BUG |
+ CPU_HAS_PERF_COUNTER;
break;
case 0x1100:
boot_cpu_data.type = CPU_SH7751;
- boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x2001:
case 0x2004:
boot_cpu_data.type = CPU_SH7770;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
-
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_LLSC;
break;
case 0x2006:
case 0x200A:
else
boot_cpu_data.type = CPU_SH7780;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
-
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
- CPU_HAS_LLSC;
break;
case 0x3000:
case 0x3003:
case 0x3009:
boot_cpu_data.type = CPU_SH7343;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.flags |= CPU_HAS_LLSC;
break;
case 0x3004:
case 0x3007:
boot_cpu_data.type = CPU_SH7785;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
- CPU_HAS_LLSC;
break;
case 0x4004:
boot_cpu_data.type = CPU_SH7786;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
- CPU_HAS_LLSC | CPU_HAS_PTEAEX;
+ boot_cpu_data.flags |= CPU_HAS_PTEAEX | CPU_HAS_L2_CACHE;
break;
case 0x3008:
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.flags |= CPU_HAS_LLSC;
-
switch (prr) {
case 0x50:
case 0x51:
boot_cpu_data.type = CPU_SH7723;
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
+ boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
break;
case 0x70:
boot_cpu_data.type = CPU_SH7366;
break;
}
break;
+ case 0x300b:
+ boot_cpu_data.type = CPU_SH7724;
+ boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
+ break;
case 0x4000: /* 1st cut */
case 0x4001: /* 2nd cut */
boot_cpu_data.type = CPU_SHX3;
- boot_cpu_data.icache.ways = 4;
- boot_cpu_data.dcache.ways = 4;
- boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
- CPU_HAS_LLSC;
break;
case 0x700:
boot_cpu_data.type = CPU_SH4_501;
boot_cpu_data.type = CPU_SH4_202;
boot_cpu_data.icache.ways = 2;
boot_cpu_data.dcache.ways = 2;
- boot_cpu_data.flags |= CPU_HAS_FPU;
break;
case 0x500 ... 0x501:
switch (prr) {
boot_cpu_data.icache.ways = 2;
boot_cpu_data.dcache.ways = 2;
- boot_cpu_data.flags |= CPU_HAS_FPU;
-
break;
default:
boot_cpu_data.type = CPU_SH_NONE;
break;
}
-#ifdef CONFIG_CPU_HAS_PTEA
- boot_cpu_data.flags |= CPU_HAS_PTEA;
-#endif
-
/*
* On anything that's not a direct-mapped cache, look to the CVR
* for I/D-cache specifics.
}
/*
- * Setup the L2 cache desc
- *
* SH-4A's have an optional PIPT L2.
*/
if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
- /* Bug if we can't decode the L2 info */
- BUG_ON(!(cvr & 0xf));
-
- /* Silicon and specifications have clearly never met.. */
- cvr ^= 0xf;
-
/*
- * Size calculation is much more sensible
- * than it is for the L1.
- *
- * Sizes are 128KB, 258KB, 512KB, and 1MB.
+ * Verify that it really has something hooked up, this
+ * is the safety net for CPUs that have optional L2
+ * support yet do not implement it.
*/
- size = (cvr & 0xf) << 17;
-
- BUG_ON(!size);
-
- boot_cpu_data.scache.way_incr = (1 << 16);
- boot_cpu_data.scache.entry_shift = 5;
- boot_cpu_data.scache.ways = 4;
- boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
-
- boot_cpu_data.scache.entry_mask =
- (boot_cpu_data.scache.way_incr -
- boot_cpu_data.scache.linesz);
-
- boot_cpu_data.scache.sets = size /
- (boot_cpu_data.scache.linesz *
- boot_cpu_data.scache.ways);
-
- boot_cpu_data.scache.way_size =
- (boot_cpu_data.scache.sets *
- boot_cpu_data.scache.linesz);
+ if ((cvr & 0xf) == 0)
+ boot_cpu_data.flags &= ~CPU_HAS_L2_CACHE;
+ else {
+ /*
+ * Silicon and specifications have clearly never
+ * met..
+ */
+ cvr ^= 0xf;
+
+ /*
+ * Size calculation is much more sensible
+ * than it is for the L1.
+ *
+ * Sizes are 128KB, 258KB, 512KB, and 1MB.
+ */
+ size = (cvr & 0xf) << 17;
+
+ boot_cpu_data.scache.way_incr = (1 << 16);
+ boot_cpu_data.scache.entry_shift = 5;
+ boot_cpu_data.scache.ways = 4;
+ boot_cpu_data.scache.linesz = L1_CACHE_BYTES;
+
+ boot_cpu_data.scache.entry_mask =
+ (boot_cpu_data.scache.way_incr -
+ boot_cpu_data.scache.linesz);
+
+ boot_cpu_data.scache.sets = size /
+ (boot_cpu_data.scache.linesz *
+ boot_cpu_data.scache.ways);
+
+ boot_cpu_data.scache.way_size =
+ (boot_cpu_data.scache.sets *
+ boot_cpu_data.scache.linesz);
+ }
}
return 0;
* SH4-202 Setup
*
* Copyright (C) 2006 Paul Mundt
+ * Copyright (C) 2009 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
static struct plat_sci_port sci_platform_data[] = {
{
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct platform_device *sh4202_devices[] __initdata = {
&sci_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
};
static int __init sh4202_devices_setup(void)
}
__initcall(sh4202_devices_setup);
+static struct platform_device *sh4202_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh4202_early_devices,
+ ARRAY_SIZE(sh4202_early_devices));
+}
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
+ HUDI, TMU0, TMU1, TMU2, RTC, SCIF, WDT,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(HUDI, 0x600),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
+ INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+ INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
+ INTC_VECT(WDT, 0x560),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, 0, 0, 0 } },
+ { 0xffd0000c, 0, 16, 4, /* IPRC */ { 0, 0, SCIF, HUDI } },
+ { 0xffd00010, 0, 16, 4, /* IPRD */ { IRL0, IRL1, IRL2, IRL3 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh4-202", vectors, NULL,
+ NULL, prio_registers, NULL);
+
+static struct intc_vect vectors_irlm[] __initdata = {
+ INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0),
+ INTC_VECT(IRL2, 0x300), INTC_VECT(IRL3, 0x360),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irlm, "sh4-202_irlm", vectors_irlm, NULL,
+ NULL, prio_registers, NULL);
+
void __init plat_irq_setup(void)
{
- /* do nothing - all IRL interrupts are handled by the board code */
+ register_intc_controller(&intc_desc);
+}
+
+#define INTC_ICR 0xffd00000UL
+#define INTC_ICR_IRLM (1<<7)
+
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ: /* individual interrupt mode for IRL3-0 */
+ ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+ register_intc_controller(&intc_desc_irlm);
+ break;
+ default:
+ BUG();
+ }
}
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/io.h>
+#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
static struct resource rtc_resources[] = {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+/* SH7750R, SH7751 and SH7751R all have two extra timer channels */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R)
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xfe100008,
+ .end = 0xfe100013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 72,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xfe100014,
+ .end = 0xfe10001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 76,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+#endif
+
static struct platform_device *sh7750_devices[] __initdata = {
&rtc_device,
&sci_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R)
+ &tmu3_device,
+ &tmu4_device,
+#endif
};
static int __init sh7750_devices_setup(void)
}
__initcall(sh7750_devices_setup);
+static struct platform_device *sh7750_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751R)
+ &tmu3_device,
+ &tmu4_device,
+#endif
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7750_early_devices,
+ ARRAY_SIZE(sh7750_early_devices));
+}
+
enum {
UNUSED = 0,
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
#include <linux/io.h>
/* interrupt sources */
IRL0, IRL1, IRL2, IRL3,
- HUDI, GPIOI,
- DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3,
- DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7,
- DMAC_DMAE,
+ HUDI, GPIOI, DMAC,
IRQ4, IRQ5, IRQ6, IRQ7,
HCAN20, HCAN21,
SSI0, SSI1,
HSPI,
MMCIF0, MMCIF1, MMCIF2, MMCIF3,
MFI, ADC, CMT,
- TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
- WDT,
- REF_RCMI, REF_ROVI,
+ TMU0, TMU1, TMU2,
+ WDT, REF,
/* interrupt groups */
- DMAC, DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF, TMU2, REF,
+ DMABRG, SCIF0, SCIF1, SCIF2, SIM, MMCIF,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
- INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
- INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
- INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
- INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0),
- INTC_VECT(DMAC_DMAE, 0x6c0),
+ INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+ INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+ INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+ INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+ INTC_VECT(DMAC, 0x6c0),
INTC_VECT(IRQ4, 0x800), INTC_VECT(IRQ5, 0x820),
INTC_VECT(IRQ6, 0x840), INTC_VECT(IRQ6, 0x860),
INTC_VECT(HCAN20, 0x900), INTC_VECT(HCAN21, 0x920),
INTC_VECT(MFI, 0xe80), /* 0xf80 according to data sheet */
INTC_VECT(ADC, 0xf80), INTC_VECT(CMT, 0xfa0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
+ INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
};
static struct intc_group groups[] __initdata = {
- INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
- DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
- DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
INTC_GROUP(DMABRG, DMABRG0, DMABRG1, DMABRG2),
INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEI),
INTC_GROUP(MMCIF, MMCIF0, MMCIF1, MMCIF2, MMCIF3),
- INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
- INTC_GROUP(REF, REF_RCMI, REF_ROVI),
};
static struct intc_mask_reg mask_registers[] __initdata = {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+
static struct platform_device *sh7760_devices[] __initdata = {
&sci_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
};
static int __init sh7760_devices_setup(void)
}
__initcall(sh7760_devices_setup);
+static struct platform_device *sh7760_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7760_early_devices,
+ ARRAY_SIZE(sh7760_early_devices));
+}
+
#define INTC_ICR 0xffd00000UL
#define INTC_ICR_IRLM (1 << 7)
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7724) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
# Pinmux setup
pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7724) := pinmux-sh7724.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
* is quite simple..
*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define STCPLL(frqcr) ((((frqcr >> 24) & 0x3f) + 1) * 2)
+#else
+#define STCPLL(frqcr) (((frqcr >> 24) & 0x1f) + 1)
+#endif
+
/*
* Instead of having two separate multipliers/divisors set, like this:
*
* I created the divisors2 array, which is used to calculate rate like
* rate = parent * 2 / divisors2[ divisor ];
*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+static int divisors2[] = { 4, 1, 8, 12, 16, 24, 32, 1, 48, 64, 72, 96, 1, 144 };
+#else
static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 };
+#endif
-static void master_clk_recalc(struct clk *clk)
+static unsigned long master_clk_recalc(struct clk *clk)
{
unsigned frqcr = ctrl_inl(FRQCR);
- clk->rate = CONFIG_SH_PCLK_FREQ * (((frqcr >> 24) & 0x1f) + 1);
+ return CONFIG_SH_PCLK_FREQ * STCPLL(frqcr);
}
static void master_clk_init(struct clk *clk)
{
clk->parent = NULL;
- clk->flags |= CLK_RATE_PROPAGATES;
- clk->rate = CONFIG_SH_PCLK_FREQ;
- master_clk_recalc(clk);
+ clk->rate = master_clk_recalc(clk);
}
-
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
unsigned long frqcr = ctrl_inl(FRQCR);
- clk->rate = clk->parent->rate / (((frqcr >> 24) & 0x1f) + 1);
+ return clk->parent->rate / STCPLL(frqcr);
}
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define MASTERDIVS { 12, 16, 24, 30, 32, 36, 48 }
+#define STCMASK 0x3f
+#define DIVCALC(div) (div/2-1)
+#define FRQCRKICK 0x80000000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define MASTERDIVS { 6, 8, 12, 16 }
+#define STCMASK 0x1f
+#define DIVCALC(div) (div-1)
+#define FRQCRKICK 0x00000000
+#else
+#define MASTERDIVS { 2, 3, 4, 6, 8, 16 }
+#define STCMASK 0x1f
+#define DIVCALC(div) (div-1)
+#define FRQCRKICK 0x00000000
+#endif
+
static int master_clk_setrate(struct clk *clk, unsigned long rate, int id)
{
int div = rate / clk->rate;
- int master_divs[] = { 2, 3, 4, 6, 8, 16 };
+ int master_divs[] = MASTERDIVS;
int index;
unsigned long frqcr;
div = master_divs[index - 1];
frqcr = ctrl_inl(FRQCR);
- frqcr &= ~(0xF << 24);
- frqcr |= ( (div-1) << 24);
+ frqcr &= ~(STCMASK << 24);
+ frqcr |= (DIVCALC(div) << 24);
+ frqcr |= FRQCRKICK;
ctrl_outl(frqcr, FRQCR);
return 0;
return index;
}
-static void sh7722_frqcr_recalc(struct clk *clk)
+static unsigned long sh7722_frqcr_recalc(struct clk *clk)
{
struct frqcr_context ctx = sh7722_get_clk_context(clk->name);
unsigned long frqcr = ctrl_inl(FRQCR);
int index;
index = (frqcr >> ctx.shift) & ctx.mask;
- clk->rate = clk->parent->rate * 2 / divisors2[index];
+ return clk->parent->rate * 2 / divisors2[index];
}
static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate,
/* clear FRQCR bits */
frqcr &= ~(ctx.mask << ctx.shift);
frqcr |= div << ctx.shift;
+ frqcr |= FRQCRKICK;
/* ...and perform actual change */
ctrl_outl(frqcr, FRQCR);
/*
* clock ops methods for SIU A/B and IrDA clock
- *
*/
-
#ifndef CONFIG_CPU_SUBTYPE_SH7343
-
static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
{
unsigned long r;
return 0;
}
-static void sh7722_siu_recalc(struct clk *clk)
+static unsigned long sh7722_siu_recalc(struct clk *clk)
{
unsigned long r;
r = ctrl_inl(clk->arch_flags);
- clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+ return clk->parent->rate * 2 / divisors2[r & 0xF];
}
static int sh7722_siu_start_stop(struct clk *clk, int enable)
return 0;
}
-static void sh7722_siu_enable(struct clk *clk)
+static int sh7722_siu_enable(struct clk *clk)
{
- sh7722_siu_start_stop(clk, 1);
+ return sh7722_siu_start_stop(clk, 1);
}
static void sh7722_siu_disable(struct clk *clk)
#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
-static void sh7722_video_enable(struct clk *clk)
+static int sh7722_video_enable(struct clk *clk)
{
unsigned long r;
r = ctrl_inl(VCLKCR);
ctrl_outl( r & ~(1<<8), VCLKCR);
+ return 0;
}
static void sh7722_video_disable(struct clk *clk)
return 0;
}
-static void sh7722_video_recalc(struct clk *clk)
+static unsigned long sh7722_video_recalc(struct clk *clk)
{
unsigned long r;
r = ctrl_inl(VCLKCR);
- clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
+ return clk->parent->rate / ((r & 0x3F) + 1);
}
static struct clk_ops sh7722_video_clk_ops = {
static struct clk sh7722_umem_clock = {
.name = "umem_clk",
.ops = &sh7722_frqcr_clk_ops,
- .flags = CLK_RATE_PROPAGATES,
};
static struct clk sh7722_sh_clock = {
.name = "sh_clk",
.ops = &sh7722_frqcr_clk_ops,
- .flags = CLK_RATE_PROPAGATES,
};
static struct clk sh7722_peripheral_clock = {
.name = "peripheral_clk",
.ops = &sh7722_frqcr_clk_ops,
- .flags = CLK_RATE_PROPAGATES,
};
static struct clk sh7722_sdram_clock = {
static struct clk sh7722_r_clock = {
.name = "r_clk",
.rate = 32768,
- .flags = CLK_RATE_PROPAGATES,
};
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
-
+#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\
+ !defined(CONFIG_CPU_SUBTYPE_SH7724)
/*
* these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
* methods of clk_ops determine which register they should access by
.arch_flags = SCLKBCR,
.ops = &sh7722_siu_clk_ops,
};
+#endif /* CONFIG_CPU_SUBTYPE_SH7343, SH7724 */
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
static struct clk sh7722_irda_clock = {
.name = "irda_clk",
.arch_flags = IrDACLKCR,
.ops = &sh7722_siu_clk_ops,
};
#endif
-#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
static struct clk sh7722_video_clock = {
.name = "video_clk",
break;
default:
return -EINVAL;
- }
+ }
r = ctrl_inl(reg);
return 0;
}
-static void sh7722_mstpcr_enable(struct clk *clk)
+static int sh7722_mstpcr_enable(struct clk *clk)
{
- sh7722_mstpcr_start_stop(clk, 1);
+ return sh7722_mstpcr_start_stop(clk, 1);
}
static void sh7722_mstpcr_disable(struct clk *clk)
sh7722_mstpcr_start_stop(clk, 0);
}
-static void sh7722_mstpcr_recalc(struct clk *clk)
-{
- if (clk->parent)
- clk->rate = clk->parent->rate;
-}
-
static struct clk_ops sh7722_mstpcr_clk_ops = {
.enable = sh7722_mstpcr_enable,
.disable = sh7722_mstpcr_disable,
- .recalc = sh7722_mstpcr_recalc,
+ .recalc = followparent_recalc,
};
-#define MSTPCR(_name, _parent, regnr, bitnr) \
+#define MSTPCR(_name, _parent, regnr, bitnr, _flags) \
{ \
.name = _name, \
+ .flags = _flags, \
.arch_flags = MSTPCR_ARCH_FLAGS(regnr, bitnr), \
.ops = (void *)_parent, \
}
static struct clk sh7722_mstpcr_clocks[] = {
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
- MSTPCR("uram0", "umem_clk", 0, 28),
- MSTPCR("xymem0", "bus_clk", 0, 26),
- MSTPCR("tmu0", "peripheral_clk", 0, 15),
- MSTPCR("cmt0", "r_clk", 0, 14),
- MSTPCR("rwdt0", "r_clk", 0, 13),
- MSTPCR("flctl0", "peripheral_clk", 0, 10),
- MSTPCR("scif0", "peripheral_clk", 0, 7),
- MSTPCR("scif1", "peripheral_clk", 0, 6),
- MSTPCR("scif2", "peripheral_clk", 0, 5),
- MSTPCR("i2c0", "peripheral_clk", 1, 9),
- MSTPCR("rtc0", "r_clk", 1, 8),
- MSTPCR("sdhi0", "peripheral_clk", 2, 18),
- MSTPCR("keysc0", "r_clk", 2, 14),
- MSTPCR("usbf0", "peripheral_clk", 2, 11),
- MSTPCR("2dg0", "bus_clk", 2, 9),
- MSTPCR("siu0", "bus_clk", 2, 8),
- MSTPCR("vou0", "bus_clk", 2, 5),
- MSTPCR("jpu0", "bus_clk", 2, 6),
- MSTPCR("beu0", "bus_clk", 2, 4),
- MSTPCR("ceu0", "bus_clk", 2, 3),
- MSTPCR("veu0", "bus_clk", 2, 2),
- MSTPCR("vpu0", "bus_clk", 2, 1),
- MSTPCR("lcdc0", "bus_clk", 2, 0),
+ MSTPCR("uram0", "umem_clk", 0, 28, CLK_ENABLE_ON_INIT),
+ MSTPCR("xymem0", "bus_clk", 0, 26, CLK_ENABLE_ON_INIT),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
+ MSTPCR("cmt0", "r_clk", 0, 14, 0),
+ MSTPCR("rwdt0", "r_clk", 0, 13, 0),
+ MSTPCR("flctl0", "peripheral_clk", 0, 10, 0),
+ MSTPCR("scif0", "peripheral_clk", 0, 7, 0),
+ MSTPCR("scif1", "peripheral_clk", 0, 6, 0),
+ MSTPCR("scif2", "peripheral_clk", 0, 5, 0),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
+ MSTPCR("rtc0", "r_clk", 1, 8, 0),
+ MSTPCR("sdhi0", "peripheral_clk", 2, 18, 0),
+ MSTPCR("keysc0", "r_clk", 2, 14, 0),
+ MSTPCR("usbf0", "peripheral_clk", 2, 11, 0),
+ MSTPCR("2dg0", "bus_clk", 2, 9, 0),
+ MSTPCR("siu0", "bus_clk", 2, 8, 0),
+ MSTPCR("vou0", "bus_clk", 2, 5, 0),
+ MSTPCR("jpu0", "bus_clk", 2, 6, CLK_ENABLE_ON_INIT),
+ MSTPCR("beu0", "bus_clk", 2, 4, 0),
+ MSTPCR("ceu0", "bus_clk", 2, 3, 0),
+ MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
+ MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
+ MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7723)
/* See page 60 of Datasheet V1.0: Overview -> Block Diagram */
- MSTPCR("tlb0", "cpu_clk", 0, 31),
- MSTPCR("ic0", "cpu_clk", 0, 30),
- MSTPCR("oc0", "cpu_clk", 0, 29),
- MSTPCR("l2c0", "sh_clk", 0, 28),
- MSTPCR("ilmem0", "cpu_clk", 0, 27),
- MSTPCR("fpu0", "cpu_clk", 0, 24),
- MSTPCR("intc0", "cpu_clk", 0, 22),
- MSTPCR("dmac0", "bus_clk", 0, 21),
- MSTPCR("sh0", "sh_clk", 0, 20),
- MSTPCR("hudi0", "peripheral_clk", 0, 19),
- MSTPCR("ubc0", "cpu_clk", 0, 17),
- MSTPCR("tmu0", "peripheral_clk", 0, 15),
- MSTPCR("cmt0", "r_clk", 0, 14),
- MSTPCR("rwdt0", "r_clk", 0, 13),
- MSTPCR("dmac1", "bus_clk", 0, 12),
- MSTPCR("tmu1", "peripheral_clk", 0, 11),
- MSTPCR("flctl0", "peripheral_clk", 0, 10),
- MSTPCR("scif0", "peripheral_clk", 0, 9),
- MSTPCR("scif1", "peripheral_clk", 0, 8),
- MSTPCR("scif2", "peripheral_clk", 0, 7),
- MSTPCR("scif3", "bus_clk", 0, 6),
- MSTPCR("scif4", "bus_clk", 0, 5),
- MSTPCR("scif5", "bus_clk", 0, 4),
- MSTPCR("msiof0", "bus_clk", 0, 2),
- MSTPCR("msiof1", "bus_clk", 0, 1),
- MSTPCR("meram0", "sh_clk", 0, 0),
- MSTPCR("i2c0", "peripheral_clk", 1, 9),
- MSTPCR("rtc0", "r_clk", 1, 8),
- MSTPCR("atapi0", "sh_clk", 2, 28),
- MSTPCR("adc0", "peripheral_clk", 2, 28),
- MSTPCR("tpu0", "bus_clk", 2, 25),
- MSTPCR("irda0", "peripheral_clk", 2, 24),
- MSTPCR("tsif0", "bus_clk", 2, 22),
- MSTPCR("icb0", "bus_clk", 2, 21),
- MSTPCR("sdhi0", "bus_clk", 2, 18),
- MSTPCR("sdhi1", "bus_clk", 2, 17),
- MSTPCR("keysc0", "r_clk", 2, 14),
- MSTPCR("usb0", "bus_clk", 2, 11),
- MSTPCR("2dg0", "bus_clk", 2, 10),
- MSTPCR("siu0", "bus_clk", 2, 8),
- MSTPCR("veu1", "bus_clk", 2, 6),
- MSTPCR("vou0", "bus_clk", 2, 5),
- MSTPCR("beu0", "bus_clk", 2, 4),
- MSTPCR("ceu0", "bus_clk", 2, 3),
- MSTPCR("veu0", "bus_clk", 2, 2),
- MSTPCR("vpu0", "bus_clk", 2, 1),
- MSTPCR("lcdc0", "bus_clk", 2, 0),
+ MSTPCR("tlb0", "cpu_clk", 0, 31, 0),
+ MSTPCR("ic0", "cpu_clk", 0, 30, 0),
+ MSTPCR("oc0", "cpu_clk", 0, 29, 0),
+ MSTPCR("l2c0", "sh_clk", 0, 28, 0),
+ MSTPCR("ilmem0", "cpu_clk", 0, 27, 0),
+ MSTPCR("fpu0", "cpu_clk", 0, 24, 0),
+ MSTPCR("intc0", "cpu_clk", 0, 22, 0),
+ MSTPCR("dmac0", "bus_clk", 0, 21, 0),
+ MSTPCR("sh0", "sh_clk", 0, 20, 0),
+ MSTPCR("hudi0", "peripheral_clk", 0, 19, 0),
+ MSTPCR("ubc0", "cpu_clk", 0, 17, 0),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
+ MSTPCR("cmt0", "r_clk", 0, 14, 0),
+ MSTPCR("rwdt0", "r_clk", 0, 13, 0),
+ MSTPCR("dmac1", "bus_clk", 0, 12, 0),
+ MSTPCR("tmu1", "peripheral_clk", 0, 11, 0),
+ MSTPCR("flctl0", "peripheral_clk", 0, 10, 0),
+ MSTPCR("scif0", "peripheral_clk", 0, 9, 0),
+ MSTPCR("scif1", "peripheral_clk", 0, 8, 0),
+ MSTPCR("scif2", "peripheral_clk", 0, 7, 0),
+ MSTPCR("scif3", "bus_clk", 0, 6, 0),
+ MSTPCR("scif4", "bus_clk", 0, 5, 0),
+ MSTPCR("scif5", "bus_clk", 0, 4, 0),
+ MSTPCR("msiof0", "bus_clk", 0, 2, 0),
+ MSTPCR("msiof1", "bus_clk", 0, 1, 0),
+ MSTPCR("meram0", "sh_clk", 0, 0, CLK_ENABLE_ON_INIT),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
+ MSTPCR("rtc0", "r_clk", 1, 8, 0),
+ MSTPCR("atapi0", "sh_clk", 2, 28, 0),
+ MSTPCR("adc0", "peripheral_clk", 2, 28, 0),
+ MSTPCR("tpu0", "bus_clk", 2, 25, 0),
+ MSTPCR("irda0", "peripheral_clk", 2, 24, 0),
+ MSTPCR("tsif0", "bus_clk", 2, 22, 0),
+ MSTPCR("icb0", "bus_clk", 2, 21, 0),
+ MSTPCR("sdhi0", "bus_clk", 2, 18, 0),
+ MSTPCR("sdhi1", "bus_clk", 2, 17, 0),
+ MSTPCR("keysc0", "r_clk", 2, 14, 0),
+ MSTPCR("usb0", "bus_clk", 2, 11, 0),
+ MSTPCR("2dg0", "bus_clk", 2, 10, 0),
+ MSTPCR("siu0", "bus_clk", 2, 8, 0),
+ MSTPCR("veu1", "bus_clk", 2, 6, CLK_ENABLE_ON_INIT),
+ MSTPCR("vou0", "bus_clk", 2, 5, 0),
+ MSTPCR("beu0", "bus_clk", 2, 4, 0),
+ MSTPCR("ceu0", "bus_clk", 2, 3, 0),
+ MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
+ MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
+ MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7724)
+ /* See Datasheet : Overview -> Block Diagram */
+ MSTPCR("tlb0", "cpu_clk", 0, 31, 0),
+ MSTPCR("ic0", "cpu_clk", 0, 30, 0),
+ MSTPCR("oc0", "cpu_clk", 0, 29, 0),
+ MSTPCR("rs0", "bus_clk", 0, 28, 0),
+ MSTPCR("ilmem0", "cpu_clk", 0, 27, 0),
+ MSTPCR("l2c0", "sh_clk", 0, 26, 0),
+ MSTPCR("fpu0", "cpu_clk", 0, 24, 0),
+ MSTPCR("intc0", "peripheral_clk", 0, 22, 0),
+ MSTPCR("dmac0", "bus_clk", 0, 21, 0),
+ MSTPCR("sh0", "sh_clk", 0, 20, 0),
+ MSTPCR("hudi0", "peripheral_clk", 0, 19, 0),
+ MSTPCR("ubc0", "cpu_clk", 0, 17, 0),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
+ MSTPCR("cmt0", "r_clk", 0, 14, 0),
+ MSTPCR("rwdt0", "r_clk", 0, 13, 0),
+ MSTPCR("dmac1", "bus_clk", 0, 12, 0),
+ MSTPCR("tmu1", "peripheral_clk", 0, 10, 0),
+ MSTPCR("scif0", "peripheral_clk", 0, 9, 0),
+ MSTPCR("scif1", "peripheral_clk", 0, 8, 0),
+ MSTPCR("scif2", "peripheral_clk", 0, 7, 0),
+ MSTPCR("scif3", "bus_clk", 0, 6, 0),
+ MSTPCR("scif4", "bus_clk", 0, 5, 0),
+ MSTPCR("scif5", "bus_clk", 0, 4, 0),
+ MSTPCR("msiof0", "bus_clk", 0, 2, 0),
+ MSTPCR("msiof1", "bus_clk", 0, 1, 0),
+ MSTPCR("keysc0", "r_clk", 1, 12, 0),
+ MSTPCR("rtc0", "r_clk", 1, 11, 0),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
+ MSTPCR("i2c1", "peripheral_clk", 1, 8, 0),
+ MSTPCR("mmc0", "bus_clk", 2, 29, 0),
+ MSTPCR("eth0", "bus_clk", 2, 28, 0),
+ MSTPCR("atapi0", "bus_clk", 2, 26, 0),
+ MSTPCR("tpu0", "bus_clk", 2, 25, 0),
+ MSTPCR("irda0", "peripheral_clk", 2, 24, 0),
+ MSTPCR("tsif0", "bus_clk", 2, 22, 0),
+ MSTPCR("usb1", "bus_clk", 2, 21, 0),
+ MSTPCR("usb0", "bus_clk", 2, 20, 0),
+ MSTPCR("2dg0", "bus_clk", 2, 19, 0),
+ MSTPCR("sdhi0", "bus_clk", 2, 18, 0),
+ MSTPCR("sdhi1", "bus_clk", 2, 17, 0),
+ MSTPCR("veu1", "bus_clk", 2, 15, CLK_ENABLE_ON_INIT),
+ MSTPCR("ceu1", "bus_clk", 2, 13, 0),
+ MSTPCR("beu1", "bus_clk", 2, 12, 0),
+ MSTPCR("2ddmac0", "sh_clk", 2, 10, 0),
+ MSTPCR("spu0", "bus_clk", 2, 9, 0),
+ MSTPCR("jpu0", "bus_clk", 2, 6, 0),
+ MSTPCR("vou0", "bus_clk", 2, 5, 0),
+ MSTPCR("beu0", "bus_clk", 2, 4, 0),
+ MSTPCR("ceu0", "bus_clk", 2, 3, 0),
+ MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
+ MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
+ MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7343)
- MSTPCR("uram0", "umem_clk", 0, 28),
- MSTPCR("xymem0", "bus_clk", 0, 26),
- MSTPCR("tmu0", "peripheral_clk", 0, 15),
- MSTPCR("cmt0", "r_clk", 0, 14),
- MSTPCR("rwdt0", "r_clk", 0, 13),
- MSTPCR("scif0", "peripheral_clk", 0, 7),
- MSTPCR("scif1", "peripheral_clk", 0, 6),
- MSTPCR("scif2", "peripheral_clk", 0, 5),
- MSTPCR("scif3", "peripheral_clk", 0, 4),
- MSTPCR("i2c0", "peripheral_clk", 1, 9),
- MSTPCR("i2c1", "peripheral_clk", 1, 8),
- MSTPCR("sdhi0", "peripheral_clk", 2, 18),
- MSTPCR("keysc0", "r_clk", 2, 14),
- MSTPCR("usbf0", "peripheral_clk", 2, 11),
- MSTPCR("siu0", "bus_clk", 2, 8),
- MSTPCR("jpu0", "bus_clk", 2, 6),
- MSTPCR("vou0", "bus_clk", 2, 5),
- MSTPCR("beu0", "bus_clk", 2, 4),
- MSTPCR("ceu0", "bus_clk", 2, 3),
- MSTPCR("veu0", "bus_clk", 2, 2),
- MSTPCR("vpu0", "bus_clk", 2, 1),
- MSTPCR("lcdc0", "bus_clk", 2, 0),
+ MSTPCR("uram0", "umem_clk", 0, 28, CLK_ENABLE_ON_INIT),
+ MSTPCR("xymem0", "bus_clk", 0, 26, CLK_ENABLE_ON_INIT),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
+ MSTPCR("cmt0", "r_clk", 0, 14, 0),
+ MSTPCR("rwdt0", "r_clk", 0, 13, 0),
+ MSTPCR("scif0", "peripheral_clk", 0, 7, 0),
+ MSTPCR("scif1", "peripheral_clk", 0, 6, 0),
+ MSTPCR("scif2", "peripheral_clk", 0, 5, 0),
+ MSTPCR("scif3", "peripheral_clk", 0, 4, 0),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
+ MSTPCR("i2c1", "peripheral_clk", 1, 8, 0),
+ MSTPCR("sdhi0", "peripheral_clk", 2, 18, 0),
+ MSTPCR("keysc0", "r_clk", 2, 14, 0),
+ MSTPCR("usbf0", "peripheral_clk", 2, 11, 0),
+ MSTPCR("siu0", "bus_clk", 2, 8, 0),
+ MSTPCR("jpu0", "bus_clk", 2, 6, CLK_ENABLE_ON_INIT),
+ MSTPCR("vou0", "bus_clk", 2, 5, 0),
+ MSTPCR("beu0", "bus_clk", 2, 4, 0),
+ MSTPCR("ceu0", "bus_clk", 2, 3, 0),
+ MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
+ MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
+ MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7366)
/* See page 52 of Datasheet V0.40: Overview -> Block Diagram */
- MSTPCR("tlb0", "cpu_clk", 0, 31),
- MSTPCR("ic0", "cpu_clk", 0, 30),
- MSTPCR("oc0", "cpu_clk", 0, 29),
- MSTPCR("rsmem0", "sh_clk", 0, 28),
- MSTPCR("xymem0", "cpu_clk", 0, 26),
- MSTPCR("intc30", "peripheral_clk", 0, 23),
- MSTPCR("intc0", "peripheral_clk", 0, 22),
- MSTPCR("dmac0", "bus_clk", 0, 21),
- MSTPCR("sh0", "sh_clk", 0, 20),
- MSTPCR("hudi0", "peripheral_clk", 0, 19),
- MSTPCR("ubc0", "cpu_clk", 0, 17),
- MSTPCR("tmu0", "peripheral_clk", 0, 15),
- MSTPCR("cmt0", "r_clk", 0, 14),
- MSTPCR("rwdt0", "r_clk", 0, 13),
- MSTPCR("flctl0", "peripheral_clk", 0, 10),
- MSTPCR("scif0", "peripheral_clk", 0, 7),
- MSTPCR("scif1", "bus_clk", 0, 6),
- MSTPCR("scif2", "bus_clk", 0, 5),
- MSTPCR("msiof0", "peripheral_clk", 0, 2),
- MSTPCR("sbr0", "peripheral_clk", 0, 1),
- MSTPCR("i2c0", "peripheral_clk", 1, 9),
- MSTPCR("icb0", "bus_clk", 2, 27),
- MSTPCR("meram0", "sh_clk", 2, 26),
- MSTPCR("dacc0", "peripheral_clk", 2, 24),
- MSTPCR("dacy0", "peripheral_clk", 2, 23),
- MSTPCR("tsif0", "bus_clk", 2, 22),
- MSTPCR("sdhi0", "bus_clk", 2, 18),
- MSTPCR("mmcif0", "bus_clk", 2, 17),
- MSTPCR("usb0", "bus_clk", 2, 11),
- MSTPCR("siu0", "bus_clk", 2, 8),
- MSTPCR("veu1", "bus_clk", 2, 7),
- MSTPCR("vou0", "bus_clk", 2, 5),
- MSTPCR("beu0", "bus_clk", 2, 4),
- MSTPCR("ceu0", "bus_clk", 2, 3),
- MSTPCR("veu0", "bus_clk", 2, 2),
- MSTPCR("vpu0", "bus_clk", 2, 1),
- MSTPCR("lcdc0", "bus_clk", 2, 0),
+ MSTPCR("tlb0", "cpu_clk", 0, 31, 0),
+ MSTPCR("ic0", "cpu_clk", 0, 30, 0),
+ MSTPCR("oc0", "cpu_clk", 0, 29, 0),
+ MSTPCR("rsmem0", "sh_clk", 0, 28, CLK_ENABLE_ON_INIT),
+ MSTPCR("xymem0", "cpu_clk", 0, 26, CLK_ENABLE_ON_INIT),
+ MSTPCR("intc30", "peripheral_clk", 0, 23, 0),
+ MSTPCR("intc0", "peripheral_clk", 0, 22, 0),
+ MSTPCR("dmac0", "bus_clk", 0, 21, 0),
+ MSTPCR("sh0", "sh_clk", 0, 20, 0),
+ MSTPCR("hudi0", "peripheral_clk", 0, 19, 0),
+ MSTPCR("ubc0", "cpu_clk", 0, 17, 0),
+ MSTPCR("tmu0", "peripheral_clk", 0, 15, 0),
+ MSTPCR("cmt0", "r_clk", 0, 14, 0),
+ MSTPCR("rwdt0", "r_clk", 0, 13, 0),
+ MSTPCR("flctl0", "peripheral_clk", 0, 10, 0),
+ MSTPCR("scif0", "peripheral_clk", 0, 7, 0),
+ MSTPCR("scif1", "bus_clk", 0, 6, 0),
+ MSTPCR("scif2", "bus_clk", 0, 5, 0),
+ MSTPCR("msiof0", "peripheral_clk", 0, 2, 0),
+ MSTPCR("sbr0", "peripheral_clk", 0, 1, 0),
+ MSTPCR("i2c0", "peripheral_clk", 1, 9, 0),
+ MSTPCR("icb0", "bus_clk", 2, 27, 0),
+ MSTPCR("meram0", "sh_clk", 2, 26, 0),
+ MSTPCR("dacc0", "peripheral_clk", 2, 24, 0),
+ MSTPCR("dacy0", "peripheral_clk", 2, 23, 0),
+ MSTPCR("tsif0", "bus_clk", 2, 22, 0),
+ MSTPCR("sdhi0", "bus_clk", 2, 18, 0),
+ MSTPCR("mmcif0", "bus_clk", 2, 17, 0),
+ MSTPCR("usb0", "bus_clk", 2, 11, 0),
+ MSTPCR("siu0", "bus_clk", 2, 8, 0),
+ MSTPCR("veu1", "bus_clk", 2, 7, CLK_ENABLE_ON_INIT),
+ MSTPCR("vou0", "bus_clk", 2, 5, 0),
+ MSTPCR("beu0", "bus_clk", 2, 4, 0),
+ MSTPCR("ceu0", "bus_clk", 2, 3, 0),
+ MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT),
+ MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT),
+ MSTPCR("lcdc0", "bus_clk", 2, 0, 0),
#endif
};
&sh7722_sh_clock,
&sh7722_peripheral_clock,
&sh7722_sdram_clock,
-#ifndef CONFIG_CPU_SUBTYPE_SH7343
+#if !defined(CONFIG_CPU_SUBTYPE_SH7343) &&\
+ !defined(CONFIG_CPU_SUBTYPE_SH7724)
&sh7722_siu_a_clock,
&sh7722_siu_b_clock,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
- &sh7722_irda_clock,
#endif
+/* 7724 should support FSI clock */
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
+ &sh7722_irda_clock,
#endif
&sh7722_video_clock,
};
void __init
arch_init_clk_ops(struct clk_ops **ops, int type)
{
- BUG_ON(type < 0 || type > ARRAY_SIZE(onchip_ops));
+ BUG_ON(type < 0 || type >= ARRAY_SIZE(onchip_ops));
*ops = onchip_ops[type];
}
struct clk *clk;
int i;
+ cpg_clk_init();
+
clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) {
pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name);
clk_put(clk);
}
- clk_recalc_rate(&sh7722_r_clock); /* make sure rate gets propagated */
+ propagate_rate(&sh7722_r_clock); /* make sure rate gets propagated */
return 0;
}
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07);
- clk->rate = clk->parent->rate / p0fc_divisors[idx];
+ return clk->parent->rate / p0fc_divisors[idx];
}
static struct clk_ops sh7763_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh7763_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
-{
- clk->rate = clk->parent->rate;
-}
-
static struct clk_ops sh7763_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
+ .recalc = followparent_recalc,
};
static struct clk_ops *sh7763_clk_ops[] = {
*ops = sh7763_clk_ops[idx];
}
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07);
- clk->rate = clk->parent->rate / cfc_divisors[idx];
+ return clk->parent->rate / cfc_divisors[idx];
}
static struct clk_ops sh7763_shyway_clk_ops = {
static struct clk sh7763_shyway_clk = {
.name = "shyway_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh7763_shyway_clk_ops,
};
&sh7763_shyway_clk,
};
-static int __init sh7763_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
+ struct clk *clk;
+ int i, ret = 0;
+
+ cpg_clk_init();
+ clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) {
struct clk *clkp = sh7763_onchip_clocks[i];
clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
+ ret |= clk_register(clkp);
}
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
-
clk_put(clk);
- return 0;
+ return ret;
}
-
-arch_initcall(sh7763_clk_init);
-
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7770_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) & 0x000f);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh7770_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7770_cpu_clk_ops = {
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQCR) & 0x0003);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7780_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh7780_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7780_cpu_clk_ops = {
*ops = sh7780_clk_ops[idx];
}
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
- clk->rate = clk->parent->rate / cfc_divisors[idx];
+ return clk->parent->rate / cfc_divisors[idx];
}
static struct clk_ops sh7780_shyway_clk_ops = {
static struct clk sh7780_shyway_clk = {
.name = "shyway_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh7780_shyway_clk_ops,
};
&sh7780_shyway_clk,
};
-static int __init sh7780_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
+ struct clk *clk;
+ int i, ret = 0;
+ cpg_clk_init();
+
+ clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
struct clk *clkp = sh7780_onchip_clocks[i];
clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
+ ret |= clk_register(clkp);
}
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
-
clk_put(clk);
- return 0;
+ return ret;
}
-
-arch_initcall(sh7780_clk_init);
-
*
* SH7785 support for the clock framework
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
#include <asm/clock.h>
#include <asm/freq.h>
-#include <asm/io.h>
-
-static int ifc_divisors[] = { 1, 2, 4, 6 };
-static int ufc_divisors[] = { 1, 1, 4, 6 };
-static int sfc_divisors[] = { 1, 1, 4, 6 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18,
- 24, 32, 36, 48, 1, 1, 1, 1 };
-static int mfc_divisors[] = { 1, 1, 4, 6 };
-static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18,
- 24, 32, 36, 48, 1, 1, 1, 1 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
-}
+#include <cpu/sh7785.h>
-static struct clk_ops sh7785_master_clk_ops = {
- .init = master_clk_init,
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+ .name = "extal",
+ .id = -1,
+ .rate = 33333333,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long pll_recalc(struct clk *clk)
{
- int idx = (ctrl_inl(FRQMR1) & 0x000f);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
-}
+ int multiplier;
-static struct clk_ops sh7785_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
+ multiplier = test_mode_pin(MODE_PIN_MODE4) ? 36 : 72;
-static void bus_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate * multiplier;
}
-static struct clk_ops sh7785_bus_clk_ops = {
- .recalc = bus_clk_recalc,
+static struct clk_ops pll_clk_ops = {
+ .recalc = pll_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
-}
-
-static struct clk_ops sh7785_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
+static struct clk pll_clk = {
+ .name = "pll_clk",
+ .id = -1,
+ .ops = &pll_clk_ops,
+ .parent = &extal_clk,
+ .flags = CLK_ENABLE_ON_INIT,
};
-static struct clk_ops *sh7785_clk_ops[] = {
- &sh7785_master_clk_ops,
- &sh7785_module_clk_ops,
- &sh7785_bus_clk_ops,
- &sh7785_cpu_clk_ops,
+static struct clk *clks[] = {
+ &extal_clk,
+ &pll_clk,
};
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7785_clk_ops))
- *ops = sh7785_clk_ops[idx];
-}
-
-static void shyway_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
- clk->rate = clk->parent->rate / sfc_divisors[idx];
-}
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+ 24, 32, 36, 48 };
-static struct clk_ops sh7785_shyway_clk_ops = {
- .recalc = shyway_clk_recalc,
+static struct clk_div_mult_table div4_table = {
+ .divisors = div2,
+ .nr_divisors = ARRAY_SIZE(div2),
};
-static struct clk sh7785_shyway_clk = {
- .name = "shyway_clk",
- .flags = CLK_ALWAYS_ENABLED,
- .ops = &sh7785_shyway_clk_ops,
+enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_GA,
+ DIV4_DU, DIV4_P, DIV4_NR };
+
+#define DIV4(_str, _bit, _mask, _flags) \
+ SH_CLK_DIV4(_str, &pll_clk, FRQMR1, _bit, _mask, _flags)
+
+struct clk div4_clks[DIV4_NR] = {
+ [DIV4_P] = DIV4("peripheral_clk", 0, 0x0f80, 0),
+ [DIV4_DU] = DIV4("du_clk", 4, 0x0ff0, 0),
+ [DIV4_GA] = DIV4("ga_clk", 8, 0x0030, 0),
+ [DIV4_DDR] = DIV4("ddr_clk", 12, 0x000c, CLK_ENABLE_ON_INIT),
+ [DIV4_B] = DIV4("bus_clk", 16, 0x0fe0, CLK_ENABLE_ON_INIT),
+ [DIV4_SH] = DIV4("shyway_clk", 20, 0x000c, CLK_ENABLE_ON_INIT),
+ [DIV4_U] = DIV4("umem_clk", 24, 0x000c, CLK_ENABLE_ON_INIT),
+ [DIV4_I] = DIV4("cpu_clk", 28, 0x000e, CLK_ENABLE_ON_INIT),
};
-static void ddr_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
- clk->rate = clk->parent->rate / mfc_divisors[idx];
-}
-
-static struct clk_ops sh7785_ddr_clk_ops = {
- .recalc = ddr_clk_recalc,
-};
-
-static struct clk sh7785_ddr_clk = {
- .name = "ddr_clk",
- .flags = CLK_ALWAYS_ENABLED,
- .ops = &sh7785_ddr_clk_ops,
-};
-
-static void ram_clk_recalc(struct clk *clk)
-{
- int idx = ((ctrl_inl(FRQMR1) >> 24) & 0x0003);
- clk->rate = clk->parent->rate / ufc_divisors[idx];
-}
-
-static struct clk_ops sh7785_ram_clk_ops = {
- .recalc = ram_clk_recalc,
+#define MSTPCR0 0xffc80030
+#define MSTPCR1 0xffc80034
+
+static struct clk mstp_clks[] = {
+ /* MSTPCR0 */
+ SH_CLK_MSTP32("scif_fck", 5, &div4_clks[DIV4_P], MSTPCR0, 29, 0),
+ SH_CLK_MSTP32("scif_fck", 4, &div4_clks[DIV4_P], MSTPCR0, 28, 0),
+ SH_CLK_MSTP32("scif_fck", 3, &div4_clks[DIV4_P], MSTPCR0, 27, 0),
+ SH_CLK_MSTP32("scif_fck", 2, &div4_clks[DIV4_P], MSTPCR0, 26, 0),
+ SH_CLK_MSTP32("scif_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 25, 0),
+ SH_CLK_MSTP32("scif_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 24, 0),
+ SH_CLK_MSTP32("ssi_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 21, 0),
+ SH_CLK_MSTP32("ssi_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 20, 0),
+ SH_CLK_MSTP32("hac_fck", 1, &div4_clks[DIV4_P], MSTPCR0, 17, 0),
+ SH_CLK_MSTP32("hac_fck", 0, &div4_clks[DIV4_P], MSTPCR0, 16, 0),
+ SH_CLK_MSTP32("mmcif_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 13, 0),
+ SH_CLK_MSTP32("flctl_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 12, 0),
+ SH_CLK_MSTP32("tmu345_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 9, 0),
+ SH_CLK_MSTP32("tmu012_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 8, 0),
+ SH_CLK_MSTP32("siof_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 3, 0),
+ SH_CLK_MSTP32("hspi_fck", -1, &div4_clks[DIV4_P], MSTPCR0, 2, 0),
+
+ /* MSTPCR1 */
+ SH_CLK_MSTP32("hudi_fck", -1, NULL, MSTPCR1, 19, 0),
+ SH_CLK_MSTP32("ubc_fck", -1, NULL, MSTPCR1, 17, 0),
+ SH_CLK_MSTP32("dmac_11_6_fck", -1, NULL, MSTPCR1, 5, 0),
+ SH_CLK_MSTP32("dmac_5_0_fck", -1, NULL, MSTPCR1, 4, 0),
+ SH_CLK_MSTP32("gdta_fck", -1, NULL, MSTPCR1, 0, 0),
};
-static struct clk sh7785_ram_clk = {
- .name = "ram_clk",
- .flags = CLK_ALWAYS_ENABLED,
- .ops = &sh7785_ram_clk_ops,
-};
-
-/*
- * Additional SH7785-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7785_onchip_clocks[] = {
- &sh7785_shyway_clk,
- &sh7785_ddr_clk,
- &sh7785_ram_clk,
-};
-
-static int __init sh7785_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sh7785_onchip_clocks); i++) {
- struct clk *clkp = sh7785_onchip_clocks[i];
-
- clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
- }
+ int i, ret = 0;
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
+ for (i = 0; i < ARRAY_SIZE(clks); i++)
+ ret |= clk_register(clks[i]);
- clk_put(clk);
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+ &div4_table);
+ if (!ret)
+ ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks));
- return 0;
+ return ret;
}
-arch_initcall(sh7785_clk_init);
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inl(FRQMR1) & 0x000f);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7786_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops sh7786_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops sh7786_cpu_clk_ops = {
*ops = sh7786_clk_ops[idx];
}
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
- clk->rate = clk->parent->rate / sfc_divisors[idx];
+ return clk->parent->rate / sfc_divisors[idx];
}
static struct clk_ops sh7786_shyway_clk_ops = {
static struct clk sh7786_shyway_clk = {
.name = "shyway_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh7786_shyway_clk_ops,
};
-static void ddr_clk_recalc(struct clk *clk)
+static unsigned long ddr_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
- clk->rate = clk->parent->rate / mfc_divisors[idx];
+ return clk->parent->rate / mfc_divisors[idx];
}
static struct clk_ops sh7786_ddr_clk_ops = {
static struct clk sh7786_ddr_clk = {
.name = "ddr_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &sh7786_ddr_clk_ops,
};
&sh7786_ddr_clk,
};
-static int __init sh7786_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
+ struct clk *clk;
+ int i, ret = 0;
+ cpg_clk_init();
+
+ clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
struct clk *clkp = sh7786_onchip_clocks[i];
clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
+ ret |= clk_register(clkp);
}
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
-
clk_put(clk);
- return 0;
+ return ret;
}
-arch_initcall(sh7786_clk_init);
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> PFC_POS) & PFC_MSK);
- clk->rate = clk->parent->rate / pfc_divisors[idx];
+ return clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops shx3_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> BFC_POS) & BFC_MSK);
- clk->rate = clk->parent->rate / bfc_divisors[idx];
+ return clk->parent->rate / bfc_divisors[idx];
}
static struct clk_ops shx3_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> IFC_POS) & IFC_MSK);
- clk->rate = clk->parent->rate / ifc_divisors[idx];
+ return clk->parent->rate / ifc_divisors[idx];
}
static struct clk_ops shx3_cpu_clk_ops = {
*ops = shx3_clk_ops[idx];
}
-static void shyway_clk_recalc(struct clk *clk)
+static unsigned long shyway_clk_recalc(struct clk *clk)
{
int idx = ((ctrl_inl(FRQCR) >> CFC_POS) & CFC_MSK);
- clk->rate = clk->parent->rate / cfc_divisors[idx];
+ return clk->parent->rate / cfc_divisors[idx];
}
static struct clk_ops shx3_shyway_clk_ops = {
static struct clk shx3_shyway_clk = {
.name = "shyway_clk",
- .flags = CLK_ALWAYS_ENABLED,
+ .flags = CLK_ENABLE_ON_INIT,
.ops = &shx3_shyway_clk_ops,
};
&shx3_shyway_clk,
};
-static int __init shx3_clk_init(void)
+int __init arch_clk_init(void)
{
- struct clk *clk = clk_get(NULL, "master_clk");
- int i;
+ struct clk *clk;
+ int i, ret = 0;
+ cpg_clk_init();
+
+ clk = clk_get(NULL, "master_clk");
for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
struct clk *clkp = shx3_onchip_clocks[i];
clkp->parent = clk;
- clk_register(clkp);
- clk_enable(clkp);
+ ret |= clk_register(clkp);
}
- /*
- * Now that we have the rest of the clocks registered, we need to
- * force the parent clock to propagate so that these clocks will
- * automatically figure out their rate. We cheat by handing the
- * parent clock its current rate and forcing child propagation.
- */
- clk_set_rate(clk, clk_get_rate(clk));
-
clk_put(clk);
- return 0;
+ return ret;
}
-arch_initcall(shx3_clk_init);
--- /dev/null
+/*
+ * SH7724 Pinmux
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Pinmux
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7724.h>
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+ PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA,
+ PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+ PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA,
+ PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+ PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA,
+ PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+ PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA,
+ PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+ PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA,
+ PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+ PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA,
+ PTG5_DATA, PTG4_DATA,
+ PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA,
+ PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+ PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA,
+ PTJ7_DATA, PTJ6_DATA, PTJ5_DATA,
+ PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA,
+ PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+ PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA,
+ PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+ PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA,
+ PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+ PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA,
+ PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+ PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA,
+ PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+ PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA,
+ PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+ PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA,
+ PTS6_DATA, PTS5_DATA, PTS4_DATA,
+ PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA,
+ PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+ PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA,
+ PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+ PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA,
+ PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+ PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA,
+ PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+ PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA,
+ PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+ PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA,
+ PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+ PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA,
+ PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+ PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA,
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PTA7_IN, PTA6_IN, PTA5_IN, PTA4_IN,
+ PTA3_IN, PTA2_IN, PTA1_IN, PTA0_IN,
+ PTB7_IN, PTB6_IN, PTB5_IN, PTB4_IN,
+ PTB3_IN, PTB2_IN, PTB1_IN, PTB0_IN,
+ PTC7_IN, PTC6_IN, PTC5_IN, PTC4_IN,
+ PTC3_IN, PTC2_IN, PTC1_IN, PTC0_IN,
+ PTD7_IN, PTD6_IN, PTD5_IN, PTD4_IN,
+ PTD3_IN, PTD2_IN, PTD1_IN, PTD0_IN,
+ PTE7_IN, PTE6_IN, PTE5_IN, PTE4_IN,
+ PTE3_IN, PTE2_IN, PTE1_IN, PTE0_IN,
+ PTF7_IN, PTF6_IN, PTF5_IN, PTF4_IN,
+ PTF3_IN, PTF2_IN, PTF1_IN, PTF0_IN,
+ PTH7_IN, PTH6_IN, PTH5_IN, PTH4_IN,
+ PTH3_IN, PTH2_IN, PTH1_IN, PTH0_IN,
+ PTJ3_IN, PTJ2_IN, PTJ1_IN, PTJ0_IN,
+ PTK7_IN, PTK6_IN, PTK5_IN, PTK4_IN,
+ PTK3_IN, PTK2_IN, PTK1_IN, PTK0_IN,
+ PTL7_IN, PTL6_IN, PTL5_IN, PTL4_IN,
+ PTL3_IN, PTL2_IN, PTL1_IN, PTL0_IN,
+ PTM7_IN, PTM6_IN, PTM5_IN, PTM4_IN,
+ PTM3_IN, PTM2_IN, PTM1_IN, PTM0_IN,
+ PTN7_IN, PTN6_IN, PTN5_IN, PTN4_IN,
+ PTN3_IN, PTN2_IN, PTN1_IN, PTN0_IN,
+ PTQ7_IN, PTQ6_IN, PTQ5_IN, PTQ4_IN,
+ PTQ3_IN, PTQ2_IN, PTQ1_IN, PTQ0_IN,
+ PTR7_IN, PTR6_IN, PTR5_IN, PTR4_IN,
+ PTR3_IN, PTR2_IN, PTR1_IN, PTR0_IN,
+ PTS6_IN, PTS5_IN, PTS4_IN,
+ PTS3_IN, PTS2_IN, PTS1_IN, PTS0_IN,
+ PTT7_IN, PTT6_IN, PTT5_IN, PTT4_IN,
+ PTT3_IN, PTT2_IN, PTT1_IN, PTT0_IN,
+ PTU7_IN, PTU6_IN, PTU5_IN, PTU4_IN,
+ PTU3_IN, PTU2_IN, PTU1_IN, PTU0_IN,
+ PTV7_IN, PTV6_IN, PTV5_IN, PTV4_IN,
+ PTV3_IN, PTV2_IN, PTV1_IN, PTV0_IN,
+ PTW7_IN, PTW6_IN, PTW5_IN, PTW4_IN,
+ PTW3_IN, PTW2_IN, PTW1_IN, PTW0_IN,
+ PTX7_IN, PTX6_IN, PTX5_IN, PTX4_IN,
+ PTX3_IN, PTX2_IN, PTX1_IN, PTX0_IN,
+ PTY7_IN, PTY6_IN, PTY5_IN, PTY4_IN,
+ PTY3_IN, PTY2_IN, PTY1_IN, PTY0_IN,
+ PTZ7_IN, PTZ6_IN, PTZ5_IN, PTZ4_IN,
+ PTZ3_IN, PTZ2_IN, PTZ1_IN, PTZ0_IN,
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PTA7_IN_PU, PTA6_IN_PU, PTA5_IN_PU, PTA4_IN_PU,
+ PTA3_IN_PU, PTA2_IN_PU, PTA1_IN_PU, PTA0_IN_PU,
+ PTB7_IN_PU, PTB6_IN_PU, PTB5_IN_PU, PTB4_IN_PU,
+ PTB3_IN_PU, PTB2_IN_PU, PTB1_IN_PU, PTB0_IN_PU,
+ PTC7_IN_PU, PTC6_IN_PU, PTC5_IN_PU, PTC4_IN_PU,
+ PTC3_IN_PU, PTC2_IN_PU, PTC1_IN_PU, PTC0_IN_PU,
+ PTD7_IN_PU, PTD6_IN_PU, PTD5_IN_PU, PTD4_IN_PU,
+ PTD3_IN_PU, PTD2_IN_PU, PTD1_IN_PU, PTD0_IN_PU,
+ PTE7_IN_PU, PTE6_IN_PU, PTE5_IN_PU, PTE4_IN_PU,
+ PTE3_IN_PU, PTE2_IN_PU, PTE1_IN_PU, PTE0_IN_PU,
+ PTF7_IN_PU, PTF6_IN_PU, PTF5_IN_PU, PTF4_IN_PU,
+ PTF3_IN_PU, PTF2_IN_PU, PTF1_IN_PU, PTF0_IN_PU,
+ PTH7_IN_PU, PTH6_IN_PU, PTH5_IN_PU, PTH4_IN_PU,
+ PTH3_IN_PU, PTH2_IN_PU, PTH1_IN_PU, PTH0_IN_PU,
+ PTJ3_IN_PU, PTJ2_IN_PU, PTJ1_IN_PU, PTJ0_IN_PU,
+ PTK7_IN_PU, PTK6_IN_PU, PTK5_IN_PU, PTK4_IN_PU,
+ PTK3_IN_PU, PTK2_IN_PU, PTK1_IN_PU, PTK0_IN_PU,
+ PTL7_IN_PU, PTL6_IN_PU, PTL5_IN_PU, PTL4_IN_PU,
+ PTL3_IN_PU, PTL2_IN_PU, PTL1_IN_PU, PTL0_IN_PU,
+ PTM7_IN_PU, PTM6_IN_PU, PTM5_IN_PU, PTM4_IN_PU,
+ PTM3_IN_PU, PTM2_IN_PU, PTM1_IN_PU, PTM0_IN_PU,
+ PTN7_IN_PU, PTN6_IN_PU, PTN5_IN_PU, PTN4_IN_PU,
+ PTN3_IN_PU, PTN2_IN_PU, PTN1_IN_PU, PTN0_IN_PU,
+ PTQ7_IN_PU, PTQ6_IN_PU, PTQ5_IN_PU, PTQ4_IN_PU,
+ PTQ3_IN_PU, PTQ2_IN_PU, PTQ1_IN_PU, PTQ0_IN_PU,
+ PTR7_IN_PU, PTR6_IN_PU, PTR5_IN_PU, PTR4_IN_PU,
+ PTR3_IN_PU, PTR2_IN_PU, PTR1_IN_PU, PTR0_IN_PU,
+ PTS6_IN_PU, PTS5_IN_PU, PTS4_IN_PU,
+ PTS3_IN_PU, PTS2_IN_PU, PTS1_IN_PU, PTS0_IN_PU,
+ PTT7_IN_PU, PTT6_IN_PU, PTT5_IN_PU, PTT4_IN_PU,
+ PTT3_IN_PU, PTT2_IN_PU, PTT1_IN_PU, PTT0_IN_PU,
+ PTU7_IN_PU, PTU6_IN_PU, PTU5_IN_PU, PTU4_IN_PU,
+ PTU3_IN_PU, PTU2_IN_PU, PTU1_IN_PU, PTU0_IN_PU,
+ PTV7_IN_PU, PTV6_IN_PU, PTV5_IN_PU, PTV4_IN_PU,
+ PTV3_IN_PU, PTV2_IN_PU, PTV1_IN_PU, PTV0_IN_PU,
+ PTW7_IN_PU, PTW6_IN_PU, PTW5_IN_PU, PTW4_IN_PU,
+ PTW3_IN_PU, PTW2_IN_PU, PTW1_IN_PU, PTW0_IN_PU,
+ PTX7_IN_PU, PTX6_IN_PU, PTX5_IN_PU, PTX4_IN_PU,
+ PTX3_IN_PU, PTX2_IN_PU, PTX1_IN_PU, PTX0_IN_PU,
+ PTY7_IN_PU, PTY6_IN_PU, PTY5_IN_PU, PTY4_IN_PU,
+ PTY3_IN_PU, PTY2_IN_PU, PTY1_IN_PU, PTY0_IN_PU,
+ PTZ7_IN_PU, PTZ6_IN_PU, PTZ5_IN_PU, PTZ4_IN_PU,
+ PTZ3_IN_PU, PTZ2_IN_PU, PTZ1_IN_PU, PTZ0_IN_PU,
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PTA7_OUT, PTA6_OUT, PTA5_OUT, PTA4_OUT,
+ PTA3_OUT, PTA2_OUT, PTA1_OUT, PTA0_OUT,
+ PTB7_OUT, PTB6_OUT, PTB5_OUT, PTB4_OUT,
+ PTB3_OUT, PTB2_OUT, PTB1_OUT, PTB0_OUT,
+ PTC7_OUT, PTC6_OUT, PTC5_OUT, PTC4_OUT,
+ PTC3_OUT, PTC2_OUT, PTC1_OUT, PTC0_OUT,
+ PTD7_OUT, PTD6_OUT, PTD5_OUT, PTD4_OUT,
+ PTD3_OUT, PTD2_OUT, PTD1_OUT, PTD0_OUT,
+ PTE7_OUT, PTE6_OUT, PTE5_OUT, PTE4_OUT,
+ PTE3_OUT, PTE2_OUT, PTE1_OUT, PTE0_OUT,
+ PTF7_OUT, PTF6_OUT, PTF5_OUT, PTF4_OUT,
+ PTF3_OUT, PTF2_OUT, PTF1_OUT, PTF0_OUT,
+ PTG5_OUT, PTG4_OUT,
+ PTG3_OUT, PTG2_OUT, PTG1_OUT, PTG0_OUT,
+ PTH7_OUT, PTH6_OUT, PTH5_OUT, PTH4_OUT,
+ PTH3_OUT, PTH2_OUT, PTH1_OUT, PTH0_OUT,
+ PTJ7_OUT, PTJ6_OUT, PTJ5_OUT,
+ PTJ3_OUT, PTJ2_OUT, PTJ1_OUT, PTJ0_OUT,
+ PTK7_OUT, PTK6_OUT, PTK5_OUT, PTK4_OUT,
+ PTK3_OUT, PTK2_OUT, PTK1_OUT, PTK0_OUT,
+ PTL7_OUT, PTL6_OUT, PTL5_OUT, PTL4_OUT,
+ PTL3_OUT, PTL2_OUT, PTL1_OUT, PTL0_OUT,
+ PTM7_OUT, PTM6_OUT, PTM5_OUT, PTM4_OUT,
+ PTM3_OUT, PTM2_OUT, PTM1_OUT, PTM0_OUT,
+ PTN7_OUT, PTN6_OUT, PTN5_OUT, PTN4_OUT,
+ PTN3_OUT, PTN2_OUT, PTN1_OUT, PTN0_OUT,
+ PTQ7_OUT, PTQ6_OUT, PTQ5_OUT, PTQ4_OUT,
+ PTQ3_OUT, PTQ2_OUT, PTQ1_OUT, PTQ0_OUT,
+ PTR7_OUT, PTR6_OUT, PTR5_OUT, PTR4_OUT,
+ PTR1_OUT, PTR0_OUT,
+ PTS6_OUT, PTS5_OUT, PTS4_OUT,
+ PTS3_OUT, PTS2_OUT, PTS1_OUT, PTS0_OUT,
+ PTT7_OUT, PTT6_OUT, PTT5_OUT, PTT4_OUT,
+ PTT3_OUT, PTT2_OUT, PTT1_OUT, PTT0_OUT,
+ PTU7_OUT, PTU6_OUT, PTU5_OUT, PTU4_OUT,
+ PTU3_OUT, PTU2_OUT, PTU1_OUT, PTU0_OUT,
+ PTV7_OUT, PTV6_OUT, PTV5_OUT, PTV4_OUT,
+ PTV3_OUT, PTV2_OUT, PTV1_OUT, PTV0_OUT,
+ PTW7_OUT, PTW6_OUT, PTW5_OUT, PTW4_OUT,
+ PTW3_OUT, PTW2_OUT, PTW1_OUT, PTW0_OUT,
+ PTX7_OUT, PTX6_OUT, PTX5_OUT, PTX4_OUT,
+ PTX3_OUT, PTX2_OUT, PTX1_OUT, PTX0_OUT,
+ PTY7_OUT, PTY6_OUT, PTY5_OUT, PTY4_OUT,
+ PTY3_OUT, PTY2_OUT, PTY1_OUT, PTY0_OUT,
+ PTZ7_OUT, PTZ6_OUT, PTZ5_OUT, PTZ4_OUT,
+ PTZ3_OUT, PTZ2_OUT, PTZ1_OUT, PTZ0_OUT,
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PTA7_FN, PTA6_FN, PTA5_FN, PTA4_FN,
+ PTA3_FN, PTA2_FN, PTA1_FN, PTA0_FN,
+ PTB7_FN, PTB6_FN, PTB5_FN, PTB4_FN,
+ PTB3_FN, PTB2_FN, PTB1_FN, PTB0_FN,
+ PTC7_FN, PTC6_FN, PTC5_FN, PTC4_FN,
+ PTC3_FN, PTC2_FN, PTC1_FN, PTC0_FN,
+ PTD7_FN, PTD6_FN, PTD5_FN, PTD4_FN,
+ PTD3_FN, PTD2_FN, PTD1_FN, PTD0_FN,
+ PTE7_FN, PTE6_FN, PTE5_FN, PTE4_FN,
+ PTE3_FN, PTE2_FN, PTE1_FN, PTE0_FN,
+ PTF7_FN, PTF6_FN, PTF5_FN, PTF4_FN,
+ PTF3_FN, PTF2_FN, PTF1_FN, PTF0_FN,
+ PTG5_FN, PTG4_FN,
+ PTG3_FN, PTG2_FN, PTG1_FN, PTG0_FN,
+ PTH7_FN, PTH6_FN, PTH5_FN, PTH4_FN,
+ PTH3_FN, PTH2_FN, PTH1_FN, PTH0_FN,
+ PTJ7_FN, PTJ6_FN, PTJ5_FN,
+ PTJ3_FN, PTJ2_FN, PTJ1_FN, PTJ0_FN,
+ PTK7_FN, PTK6_FN, PTK5_FN, PTK4_FN,
+ PTK3_FN, PTK2_FN, PTK1_FN, PTK0_FN,
+ PTL7_FN, PTL6_FN, PTL5_FN, PTL4_FN,
+ PTL3_FN, PTL2_FN, PTL1_FN, PTL0_FN,
+ PTM7_FN, PTM6_FN, PTM5_FN, PTM4_FN,
+ PTM3_FN, PTM2_FN, PTM1_FN, PTM0_FN,
+ PTN7_FN, PTN6_FN, PTN5_FN, PTN4_FN,
+ PTN3_FN, PTN2_FN, PTN1_FN, PTN0_FN,
+ PTQ7_FN, PTQ6_FN, PTQ5_FN, PTQ4_FN,
+ PTQ3_FN, PTQ2_FN, PTQ1_FN, PTQ0_FN,
+ PTR7_FN, PTR6_FN, PTR5_FN, PTR4_FN,
+ PTR3_FN, PTR2_FN, PTR1_FN, PTR0_FN,
+ PTS6_FN, PTS5_FN, PTS4_FN,
+ PTS3_FN, PTS2_FN, PTS1_FN, PTS0_FN,
+ PTT7_FN, PTT6_FN, PTT5_FN, PTT4_FN,
+ PTT3_FN, PTT2_FN, PTT1_FN, PTT0_FN,
+ PTU7_FN, PTU6_FN, PTU5_FN, PTU4_FN,
+ PTU3_FN, PTU2_FN, PTU1_FN, PTU0_FN,
+ PTV7_FN, PTV6_FN, PTV5_FN, PTV4_FN,
+ PTV3_FN, PTV2_FN, PTV1_FN, PTV0_FN,
+ PTW7_FN, PTW6_FN, PTW5_FN, PTW4_FN,
+ PTW3_FN, PTW2_FN, PTW1_FN, PTW0_FN,
+ PTX7_FN, PTX6_FN, PTX5_FN, PTX4_FN,
+ PTX3_FN, PTX2_FN, PTX1_FN, PTX0_FN,
+ PTY7_FN, PTY6_FN, PTY5_FN, PTY4_FN,
+ PTY3_FN, PTY2_FN, PTY1_FN, PTY0_FN,
+ PTZ7_FN, PTZ6_FN, PTZ5_FN, PTZ4_FN,
+ PTZ3_FN, PTZ2_FN, PTZ1_FN, PTZ0_FN,
+
+
+ PSA15_0, PSA15_1,
+ PSA14_0, PSA14_1,
+ PSA13_0, PSA13_1,
+ PSA12_0, PSA12_1,
+ PSA10_0, PSA10_1,
+ PSA9_0, PSA9_1,
+ PSA8_0, PSA8_1,
+ PSA7_0, PSA7_1,
+ PSA6_0, PSA6_1,
+ PSA5_0, PSA5_1,
+ PSA3_0, PSA3_1,
+ PSA2_0, PSA2_1,
+ PSA1_0, PSA1_1,
+ PSA0_0, PSA0_1,
+
+ PSB14_0, PSB14_1,
+ PSB13_0, PSB13_1,
+ PSB12_0, PSB12_1,
+ PSB11_0, PSB11_1,
+ PSB10_0, PSB10_1,
+ PSB9_0, PSB9_1,
+ PSB8_0, PSB8_1,
+ PSB7_0, PSB7_1,
+ PSB6_0, PSB6_1,
+ PSB5_0, PSB5_1,
+ PSB4_0, PSB4_1,
+ PSB3_0, PSB3_1,
+ PSB2_0, PSB2_1,
+ PSB1_0, PSB1_1,
+ PSB0_0, PSB0_1,
+
+ PSC15_0, PSC15_1,
+ PSC14_0, PSC14_1,
+ PSC13_0, PSC13_1,
+ PSC12_0, PSC12_1,
+ PSC11_0, PSC11_1,
+ PSC10_0, PSC10_1,
+ PSC9_0, PSC9_1,
+ PSC8_0, PSC8_1,
+ PSC7_0, PSC7_1,
+ PSC6_0, PSC6_1,
+ PSC5_0, PSC5_1,
+ PSC4_0, PSC4_1,
+ PSC2_0, PSC2_1,
+ PSC1_0, PSC1_1,
+ PSC0_0, PSC0_1,
+
+ PSD15_0, PSD15_1,
+ PSD14_0, PSD14_1,
+ PSD13_0, PSD13_1,
+ PSD12_0, PSD12_1,
+ PSD11_0, PSD11_1,
+ PSD10_0, PSD10_1,
+ PSD9_0, PSD9_1,
+ PSD8_0, PSD8_1,
+ PSD7_0, PSD7_1,
+ PSD6_0, PSD6_1,
+ PSD5_0, PSD5_1,
+ PSD4_0, PSD4_1,
+ PSD3_0, PSD3_1,
+ PSD2_0, PSD2_1,
+ PSD1_0, PSD1_1,
+ PSD0_0, PSD0_1,
+
+ PSE15_0, PSE15_1,
+ PSE14_0, PSE14_1,
+ PSE13_0, PSE13_1,
+ PSE12_0, PSE12_1,
+ PSE11_0, PSE11_1,
+ PSE10_0, PSE10_1,
+ PSE9_0, PSE9_1,
+ PSE8_0, PSE8_1,
+ PSE7_0, PSE7_1,
+ PSE6_0, PSE6_1,
+ PSE5_0, PSE5_1,
+ PSE4_0, PSE4_1,
+ PSE3_0, PSE3_1,
+ PSE2_0, PSE2_1,
+ PSE1_0, PSE1_1,
+ PSE0_0, PSE0_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ /*PTA*/
+ D23_MARK, KEYOUT2_MARK, IDED15_MARK,
+ D22_MARK, KEYOUT1_MARK, IDED14_MARK,
+ D21_MARK, KEYOUT0_MARK, IDED13_MARK,
+ D20_MARK, KEYIN4_MARK, IDED12_MARK,
+ D19_MARK, KEYIN3_MARK, IDED11_MARK,
+ D18_MARK, KEYIN2_MARK, IDED10_MARK,
+ D17_MARK, KEYIN1_MARK, IDED9_MARK,
+ D16_MARK, KEYIN0_MARK, IDED8_MARK,
+
+ /*PTB*/
+ D31_MARK, TPUTO1_MARK, IDEA1_MARK,
+ D30_MARK, TPUTO0_MARK, IDEA0_MARK,
+ D29_MARK, IODREQ_MARK,
+ D28_MARK, IDECS0_MARK,
+ D27_MARK, IDECS1_MARK,
+ D26_MARK, KEYOUT5_IN5_MARK, IDEIORD_MARK,
+ D25_MARK, KEYOUT4_IN6_MARK, IDEIOWR_MARK,
+ D24_MARK, KEYOUT3_MARK, IDEINT_MARK,
+
+ /*PTC*/
+ LCDD7_MARK,
+ LCDD6_MARK,
+ LCDD5_MARK,
+ LCDD4_MARK,
+ LCDD3_MARK,
+ LCDD2_MARK,
+ LCDD1_MARK,
+ LCDD0_MARK,
+
+ /*PTD*/
+ LCDD15_MARK,
+ LCDD14_MARK,
+ LCDD13_MARK,
+ LCDD12_MARK,
+ LCDD11_MARK,
+ LCDD10_MARK,
+ LCDD9_MARK,
+ LCDD8_MARK,
+
+ /*PTE*/
+ FSIMCKB_MARK,
+ FSIMCKA_MARK,
+ LCDD21_MARK, SCIF2_L_TXD_MARK,
+ LCDD20_MARK, SCIF4_SCK_MARK,
+ LCDD19_MARK, SCIF4_RXD_MARK,
+ LCDD18_MARK, SCIF4_TXD_MARK,
+ LCDD17_MARK,
+ LCDD16_MARK,
+
+ /*PTF*/
+ LCDVSYN_MARK,
+ LCDDISP_MARK, LCDRS_MARK,
+ LCDHSYN_MARK, LCDCS_MARK,
+ LCDDON_MARK,
+ LCDDCK_MARK, LCDWR_MARK,
+ LCDVEPWC_MARK, SCIF0_TXD_MARK,
+ LCDD23_MARK, SCIF2_L_SCK_MARK,
+ LCDD22_MARK, SCIF2_L_RXD_MARK,
+
+ /*PTG*/
+ AUDCK_MARK,
+ AUDSYNC_MARK,
+ AUDATA3_MARK,
+ AUDATA2_MARK,
+ AUDATA1_MARK,
+ AUDATA0_MARK,
+
+ /*PTH*/
+ VIO0_VD_MARK,
+ VIO0_CLK_MARK,
+ VIO0_D7_MARK,
+ VIO0_D6_MARK,
+ VIO0_D5_MARK,
+ VIO0_D4_MARK,
+ VIO0_D3_MARK,
+ VIO0_D2_MARK,
+
+ /*PTJ*/
+ PDSTATUS_MARK,
+ STATUS2_MARK,
+ STATUS0_MARK,
+ A25_MARK, BS_MARK,
+ A24_MARK,
+ A23_MARK,
+ A22_MARK,
+
+ /*PTK*/
+ VIO1_D5_MARK, VIO0_D13_MARK, IDED5_MARK,
+ VIO1_D4_MARK, VIO0_D12_MARK, IDED4_MARK,
+ VIO1_D3_MARK, VIO0_D11_MARK, IDED3_MARK,
+ VIO1_D2_MARK, VIO0_D10_MARK, IDED2_MARK,
+ VIO1_D1_MARK, VIO0_D9_MARK, IDED1_MARK,
+ VIO1_D0_MARK, VIO0_D8_MARK, IDED0_MARK,
+ VIO0_FLD_MARK,
+ VIO0_HD_MARK,
+
+ /*PTL*/
+ DV_D5_MARK, SCIF3_V_SCK_MARK, RMII_RXD0_MARK,
+ DV_D4_MARK, SCIF3_V_RXD_MARK, RMII_RXD1_MARK,
+ DV_D3_MARK, SCIF3_V_TXD_MARK, RMII_REF_CLK_MARK,
+ DV_D2_MARK, SCIF1_SCK_MARK, RMII_TX_EN_MARK,
+ DV_D1_MARK, SCIF1_RXD_MARK, RMII_TXD0_MARK,
+ DV_D0_MARK, SCIF1_TXD_MARK, RMII_TXD1_MARK,
+ DV_D15_MARK,
+ DV_D14_MARK, MSIOF0_MCK_MARK,
+
+ /*PTM*/
+ DV_D13_MARK, MSIOF0_TSCK_MARK,
+ DV_D12_MARK, MSIOF0_RXD_MARK,
+ DV_D11_MARK, MSIOF0_TXD_MARK,
+ DV_D10_MARK, MSIOF0_TSYNC_MARK,
+ DV_D9_MARK, MSIOF0_SS1_MARK, MSIOF0_RSCK_MARK,
+ DV_D8_MARK, MSIOF0_SS2_MARK, MSIOF0_RSYNC_MARK,
+ LCDVCPWC_MARK, SCIF0_RXD_MARK,
+ LCDRD_MARK, SCIF0_SCK_MARK,
+
+ /*PTN*/
+ VIO0_D1_MARK,
+ VIO0_D0_MARK,
+ DV_CLKI_MARK,
+ DV_CLK_MARK, SCIF2_V_SCK_MARK,
+ DV_VSYNC_MARK, SCIF2_V_RXD_MARK,
+ DV_HSYNC_MARK, SCIF2_V_TXD_MARK,
+ DV_D7_MARK, SCIF3_V_CTS_MARK, RMII_RX_ER_MARK,
+ DV_D6_MARK, SCIF3_V_RTS_MARK, RMII_CRS_DV_MARK,
+
+ /*PTQ*/
+ D7_MARK,
+ D6_MARK,
+ D5_MARK,
+ D4_MARK,
+ D3_MARK,
+ D2_MARK,
+ D1_MARK,
+ D0_MARK,
+
+ /*PTR*/
+ CS6B_CE1B_MARK,
+ CS6A_CE2B_MARK,
+ CS5B_CE1A_MARK,
+ CS5A_CE2A_MARK,
+ IOIS16_MARK, LCDLCLK_MARK,
+ WAIT_MARK,
+ WE3_ICIOWR_MARK, TPUTO3_MARK, TPUTI3_MARK,
+ WE2_ICIORD_MARK, TPUTO2_MARK, IDEA2_MARK,
+
+ /*PTS*/
+ VIO_CKO_MARK,
+ VIO1_FLD_MARK, TPUTI2_MARK, IDEIORDY_MARK,
+ VIO1_HD_MARK, SCIF5_SCK_MARK,
+ VIO1_VD_MARK, SCIF5_RXD_MARK,
+ VIO1_CLK_MARK, SCIF5_TXD_MARK,
+ VIO1_D7_MARK, VIO0_D15_MARK, IDED7_MARK,
+ VIO1_D6_MARK, VIO0_D14_MARK, IDED6_MARK,
+
+ /*PTT*/
+ D15_MARK,
+ D14_MARK,
+ D13_MARK,
+ D12_MARK,
+ D11_MARK,
+ D10_MARK,
+ D9_MARK,
+ D8_MARK,
+
+ /*PTU*/
+ DMAC_DACK0_MARK,
+ DMAC_DREQ0_MARK,
+ FSIOASD_MARK,
+ FSIIABCK_MARK,
+ FSIIALRCK_MARK,
+ FSIOABCK_MARK,
+ FSIOALRCK_MARK,
+ CLKAUDIOAO_MARK,
+
+ /*PTV*/
+ FSIIBSD_MARK, MSIOF1_SS2_MARK, MSIOF1_RSYNC_MARK,
+ FSIOBSD_MARK, MSIOF1_SS1_MARK, MSIOF1_RSCK_MARK,
+ FSIIBBCK_MARK, MSIOF1_RXD_MARK,
+ FSIIBLRCK_MARK, MSIOF1_TSYNC_MARK,
+ FSIOBBCK_MARK, MSIOF1_TSCK_MARK,
+ FSIOBLRCK_MARK, MSIOF1_TXD_MARK,
+ CLKAUDIOBO_MARK, MSIOF1_MCK_MARK,
+ FSIIASD_MARK,
+
+ /*PTW*/
+ MMC_D7_MARK, SDHI1CD_MARK, IODACK_MARK,
+ MMC_D6_MARK, SDHI1WP_MARK, IDERST_MARK,
+ MMC_D5_MARK, SDHI1D3_MARK, EXBUF_ENB_MARK,
+ MMC_D4_MARK, SDHI1D2_MARK, DIRECTION_MARK,
+ MMC_D3_MARK, SDHI1D1_MARK,
+ MMC_D2_MARK, SDHI1D0_MARK,
+ MMC_D1_MARK, SDHI1CMD_MARK,
+ MMC_D0_MARK, SDHI1CLK_MARK,
+
+ /*PTX*/
+ DMAC_DACK1_MARK, IRDA_OUT_MARK,
+ DMAC_DREQ1_MARK, IRDA_IN_MARK,
+ TSIF_TS0_SDAT_MARK, LNKSTA_MARK,
+ TSIF_TS0_SCK_MARK, MDIO_MARK,
+ TSIF_TS0_SDEN_MARK, MDC_MARK,
+ TSIF_TS0_SPSYNC_MARK,
+ MMC_CLK_MARK,
+ MMC_CMD_MARK,
+
+ /*PTY*/
+ SDHI0CD_MARK,
+ SDHI0WP_MARK,
+ SDHI0D3_MARK,
+ SDHI0D2_MARK,
+ SDHI0D1_MARK,
+ SDHI0D0_MARK,
+ SDHI0CMD_MARK,
+ SDHI0CLK_MARK,
+
+ /*PTZ*/
+ INTC_IRQ7_MARK, SCIF3_I_CTS_MARK,
+ INTC_IRQ6_MARK, SCIF3_I_RTS_MARK,
+ INTC_IRQ5_MARK, SCIF3_I_SCK_MARK,
+ INTC_IRQ4_MARK, SCIF3_I_RXD_MARK,
+ INTC_IRQ3_MARK, SCIF3_I_TXD_MARK,
+ INTC_IRQ2_MARK,
+ INTC_IRQ1_MARK,
+ INTC_IRQ0_MARK,
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+ /* PTA GPIO */
+ PINMUX_DATA(PTA7_DATA, PTA7_IN, PTA7_OUT, PTA7_IN_PU),
+ PINMUX_DATA(PTA6_DATA, PTA6_IN, PTA6_OUT, PTA6_IN_PU),
+ PINMUX_DATA(PTA5_DATA, PTA5_IN, PTA5_OUT, PTA5_IN_PU),
+ PINMUX_DATA(PTA4_DATA, PTA4_IN, PTA4_OUT, PTA4_IN_PU),
+ PINMUX_DATA(PTA3_DATA, PTA3_IN, PTA3_OUT, PTA3_IN_PU),
+ PINMUX_DATA(PTA2_DATA, PTA2_IN, PTA2_OUT, PTA2_IN_PU),
+ PINMUX_DATA(PTA1_DATA, PTA1_IN, PTA1_OUT, PTA1_IN_PU),
+ PINMUX_DATA(PTA0_DATA, PTA0_IN, PTA0_OUT, PTA0_IN_PU),
+
+ /* PTB GPIO */
+ PINMUX_DATA(PTB7_DATA, PTB7_IN, PTB7_OUT, PTB7_IN_PU),
+ PINMUX_DATA(PTB6_DATA, PTB6_IN, PTB6_OUT, PTB6_IN_PU),
+ PINMUX_DATA(PTB5_DATA, PTB5_IN, PTB5_OUT, PTB5_IN_PU),
+ PINMUX_DATA(PTB4_DATA, PTB4_IN, PTB4_OUT, PTB4_IN_PU),
+ PINMUX_DATA(PTB3_DATA, PTB3_IN, PTB3_OUT, PTB3_IN_PU),
+ PINMUX_DATA(PTB2_DATA, PTB2_IN, PTB2_OUT, PTB2_IN_PU),
+ PINMUX_DATA(PTB1_DATA, PTB1_IN, PTB1_OUT, PTB1_IN_PU),
+ PINMUX_DATA(PTB0_DATA, PTB0_IN, PTB0_OUT, PTB0_IN_PU),
+
+ /* PTC GPIO */
+ PINMUX_DATA(PTC7_DATA, PTC7_IN, PTC7_OUT, PTC7_IN_PU),
+ PINMUX_DATA(PTC6_DATA, PTC6_IN, PTC6_OUT, PTC6_IN_PU),
+ PINMUX_DATA(PTC5_DATA, PTC5_IN, PTC5_OUT, PTC5_IN_PU),
+ PINMUX_DATA(PTC4_DATA, PTC4_IN, PTC4_OUT, PTC4_IN_PU),
+ PINMUX_DATA(PTC3_DATA, PTC3_IN, PTC3_OUT, PTC3_IN_PU),
+ PINMUX_DATA(PTC2_DATA, PTC2_IN, PTC2_OUT, PTC2_IN_PU),
+ PINMUX_DATA(PTC1_DATA, PTC1_IN, PTC1_OUT, PTC1_IN_PU),
+ PINMUX_DATA(PTC0_DATA, PTC0_IN, PTC0_OUT, PTC0_IN_PU),
+
+ /* PTD GPIO */
+ PINMUX_DATA(PTD7_DATA, PTD7_IN, PTD7_OUT, PTD7_IN_PU),
+ PINMUX_DATA(PTD6_DATA, PTD6_IN, PTD6_OUT, PTD6_IN_PU),
+ PINMUX_DATA(PTD5_DATA, PTD5_IN, PTD5_OUT, PTD5_IN_PU),
+ PINMUX_DATA(PTD4_DATA, PTD4_IN, PTD4_OUT, PTD4_IN_PU),
+ PINMUX_DATA(PTD3_DATA, PTD3_IN, PTD3_OUT, PTD3_IN_PU),
+ PINMUX_DATA(PTD2_DATA, PTD2_IN, PTD2_OUT, PTD2_IN_PU),
+ PINMUX_DATA(PTD1_DATA, PTD1_IN, PTD1_OUT, PTD1_IN_PU),
+ PINMUX_DATA(PTD0_DATA, PTD0_IN, PTD0_OUT, PTD0_IN_PU),
+
+ /* PTE GPIO */
+ PINMUX_DATA(PTE7_DATA, PTE7_IN, PTE7_OUT, PTE7_IN_PU),
+ PINMUX_DATA(PTE6_DATA, PTE6_IN, PTE6_OUT, PTE6_IN_PU),
+ PINMUX_DATA(PTE5_DATA, PTE5_IN, PTE5_OUT, PTE5_IN_PU),
+ PINMUX_DATA(PTE4_DATA, PTE4_IN, PTE4_OUT, PTE4_IN_PU),
+ PINMUX_DATA(PTE3_DATA, PTE3_IN, PTE3_OUT, PTE3_IN_PU),
+ PINMUX_DATA(PTE2_DATA, PTE2_IN, PTE2_OUT, PTE2_IN_PU),
+ PINMUX_DATA(PTE1_DATA, PTE1_IN, PTE1_OUT, PTE1_IN_PU),
+ PINMUX_DATA(PTE0_DATA, PTE0_IN, PTE0_OUT, PTE0_IN_PU),
+
+ /* PTF GPIO */
+ PINMUX_DATA(PTF7_DATA, PTF7_IN, PTF7_OUT, PTF7_IN_PU),
+ PINMUX_DATA(PTF6_DATA, PTF6_IN, PTF6_OUT, PTF6_IN_PU),
+ PINMUX_DATA(PTF5_DATA, PTF5_IN, PTF5_OUT, PTF5_IN_PU),
+ PINMUX_DATA(PTF4_DATA, PTF4_IN, PTF4_OUT, PTF4_IN_PU),
+ PINMUX_DATA(PTF3_DATA, PTF3_IN, PTF3_OUT, PTF3_IN_PU),
+ PINMUX_DATA(PTF2_DATA, PTF2_IN, PTF2_OUT, PTF2_IN_PU),
+ PINMUX_DATA(PTF1_DATA, PTF1_IN, PTF1_OUT, PTF1_IN_PU),
+ PINMUX_DATA(PTF0_DATA, PTF0_IN, PTF0_OUT, PTF0_IN_PU),
+
+ /* PTG GPIO */
+ PINMUX_DATA(PTG5_DATA, PTG5_OUT),
+ PINMUX_DATA(PTG4_DATA, PTG4_OUT),
+ PINMUX_DATA(PTG3_DATA, PTG3_OUT),
+ PINMUX_DATA(PTG2_DATA, PTG2_OUT),
+ PINMUX_DATA(PTG1_DATA, PTG1_OUT),
+ PINMUX_DATA(PTG0_DATA, PTG0_OUT),
+
+ /* PTH GPIO */
+ PINMUX_DATA(PTH7_DATA, PTH7_IN, PTH7_OUT, PTH7_IN_PU),
+ PINMUX_DATA(PTH6_DATA, PTH6_IN, PTH6_OUT, PTH6_IN_PU),
+ PINMUX_DATA(PTH5_DATA, PTH5_IN, PTH5_OUT, PTH5_IN_PU),
+ PINMUX_DATA(PTH4_DATA, PTH4_IN, PTH4_OUT, PTH4_IN_PU),
+ PINMUX_DATA(PTH3_DATA, PTH3_IN, PTH3_OUT, PTH3_IN_PU),
+ PINMUX_DATA(PTH2_DATA, PTH2_IN, PTH2_OUT, PTH2_IN_PU),
+ PINMUX_DATA(PTH1_DATA, PTH1_IN, PTH1_OUT, PTH1_IN_PU),
+ PINMUX_DATA(PTH0_DATA, PTH0_IN, PTH0_OUT, PTH0_IN_PU),
+
+ /* PTJ GPIO */
+ PINMUX_DATA(PTJ7_DATA, PTJ7_OUT),
+ PINMUX_DATA(PTJ6_DATA, PTJ6_OUT),
+ PINMUX_DATA(PTJ5_DATA, PTJ5_OUT),
+ PINMUX_DATA(PTJ3_DATA, PTJ3_IN, PTJ3_OUT, PTJ3_IN_PU),
+ PINMUX_DATA(PTJ2_DATA, PTJ2_IN, PTJ2_OUT, PTJ2_IN_PU),
+ PINMUX_DATA(PTJ1_DATA, PTJ1_IN, PTJ1_OUT, PTJ1_IN_PU),
+ PINMUX_DATA(PTJ0_DATA, PTJ0_IN, PTJ0_OUT, PTJ0_IN_PU),
+
+ /* PTK GPIO */
+ PINMUX_DATA(PTK7_DATA, PTK7_IN, PTK7_OUT, PTK7_IN_PU),
+ PINMUX_DATA(PTK6_DATA, PTK6_IN, PTK6_OUT, PTK6_IN_PU),
+ PINMUX_DATA(PTK5_DATA, PTK5_IN, PTK5_OUT, PTK5_IN_PU),
+ PINMUX_DATA(PTK4_DATA, PTK4_IN, PTK4_OUT, PTK4_IN_PU),
+ PINMUX_DATA(PTK3_DATA, PTK3_IN, PTK3_OUT, PTK3_IN_PU),
+ PINMUX_DATA(PTK2_DATA, PTK2_IN, PTK2_OUT, PTK2_IN_PU),
+ PINMUX_DATA(PTK1_DATA, PTK1_IN, PTK1_OUT, PTK1_IN_PU),
+ PINMUX_DATA(PTK0_DATA, PTK0_IN, PTK0_OUT, PTK0_IN_PU),
+
+ /* PTL GPIO */
+ PINMUX_DATA(PTL7_DATA, PTL7_IN, PTL7_OUT, PTL7_IN_PU),
+ PINMUX_DATA(PTL6_DATA, PTL6_IN, PTL6_OUT, PTL6_IN_PU),
+ PINMUX_DATA(PTL5_DATA, PTL5_IN, PTL5_OUT, PTL5_IN_PU),
+ PINMUX_DATA(PTL4_DATA, PTL4_IN, PTL4_OUT, PTL4_IN_PU),
+ PINMUX_DATA(PTL3_DATA, PTL3_IN, PTL3_OUT, PTL3_IN_PU),
+ PINMUX_DATA(PTL2_DATA, PTL2_IN, PTL2_OUT, PTL2_IN_PU),
+ PINMUX_DATA(PTL1_DATA, PTL1_IN, PTL1_OUT, PTL1_IN_PU),
+ PINMUX_DATA(PTL0_DATA, PTL0_IN, PTL0_OUT, PTL0_IN_PU),
+
+ /* PTM GPIO */
+ PINMUX_DATA(PTM7_DATA, PTM7_IN, PTM7_OUT, PTM7_IN_PU),
+ PINMUX_DATA(PTM6_DATA, PTM6_IN, PTM6_OUT, PTM6_IN_PU),
+ PINMUX_DATA(PTM5_DATA, PTM5_IN, PTM5_OUT, PTM5_IN_PU),
+ PINMUX_DATA(PTM4_DATA, PTM4_IN, PTM4_OUT, PTM4_IN_PU),
+ PINMUX_DATA(PTM3_DATA, PTM3_IN, PTM3_OUT, PTM3_IN_PU),
+ PINMUX_DATA(PTM2_DATA, PTM2_IN, PTM2_OUT, PTM2_IN_PU),
+ PINMUX_DATA(PTM1_DATA, PTM1_IN, PTM1_OUT, PTM1_IN_PU),
+ PINMUX_DATA(PTM0_DATA, PTM0_IN, PTM0_OUT, PTM0_IN_PU),
+
+ /* PTN GPIO */
+ PINMUX_DATA(PTN7_DATA, PTN7_IN, PTN7_OUT, PTN7_IN_PU),
+ PINMUX_DATA(PTN6_DATA, PTN6_IN, PTN6_OUT, PTN6_IN_PU),
+ PINMUX_DATA(PTN5_DATA, PTN5_IN, PTN5_OUT, PTN5_IN_PU),
+ PINMUX_DATA(PTN4_DATA, PTN4_IN, PTN4_OUT, PTN4_IN_PU),
+ PINMUX_DATA(PTN3_DATA, PTN3_IN, PTN3_OUT, PTN3_IN_PU),
+ PINMUX_DATA(PTN2_DATA, PTN2_IN, PTN2_OUT, PTN2_IN_PU),
+ PINMUX_DATA(PTN1_DATA, PTN1_IN, PTN1_OUT, PTN1_IN_PU),
+ PINMUX_DATA(PTN0_DATA, PTN0_IN, PTN0_OUT, PTN0_IN_PU),
+
+ /* PTQ GPIO */
+ PINMUX_DATA(PTQ7_DATA, PTQ7_IN, PTQ7_OUT, PTQ7_IN_PU),
+ PINMUX_DATA(PTQ6_DATA, PTQ6_IN, PTQ6_OUT, PTQ6_IN_PU),
+ PINMUX_DATA(PTQ5_DATA, PTQ5_IN, PTQ5_OUT, PTQ5_IN_PU),
+ PINMUX_DATA(PTQ4_DATA, PTQ4_IN, PTQ4_OUT, PTQ4_IN_PU),
+ PINMUX_DATA(PTQ3_DATA, PTQ3_IN, PTQ3_OUT, PTQ3_IN_PU),
+ PINMUX_DATA(PTQ2_DATA, PTQ2_IN, PTQ2_OUT, PTQ2_IN_PU),
+ PINMUX_DATA(PTQ1_DATA, PTQ1_IN, PTQ1_OUT, PTQ1_IN_PU),
+ PINMUX_DATA(PTQ0_DATA, PTQ0_IN, PTQ0_OUT, PTQ0_IN_PU),
+
+ /* PTR GPIO */
+ PINMUX_DATA(PTR7_DATA, PTR7_IN, PTR7_OUT, PTR7_IN_PU),
+ PINMUX_DATA(PTR6_DATA, PTR6_IN, PTR6_OUT, PTR6_IN_PU),
+ PINMUX_DATA(PTR5_DATA, PTR5_IN, PTR5_OUT, PTR5_IN_PU),
+ PINMUX_DATA(PTR4_DATA, PTR4_IN, PTR4_OUT, PTR4_IN_PU),
+ PINMUX_DATA(PTR3_DATA, PTR3_IN, PTR3_IN_PU),
+ PINMUX_DATA(PTR2_DATA, PTR2_IN, PTR2_IN_PU),
+ PINMUX_DATA(PTR1_DATA, PTR1_IN, PTR1_OUT, PTR1_IN_PU),
+ PINMUX_DATA(PTR0_DATA, PTR0_IN, PTR0_OUT, PTR0_IN_PU),
+
+ /* PTS GPIO */
+ PINMUX_DATA(PTS6_DATA, PTS6_IN, PTS6_OUT, PTS6_IN_PU),
+ PINMUX_DATA(PTS5_DATA, PTS5_IN, PTS5_OUT, PTS5_IN_PU),
+ PINMUX_DATA(PTS4_DATA, PTS4_IN, PTS4_OUT, PTS4_IN_PU),
+ PINMUX_DATA(PTS3_DATA, PTS3_IN, PTS3_OUT, PTS3_IN_PU),
+ PINMUX_DATA(PTS2_DATA, PTS2_IN, PTS2_OUT, PTS2_IN_PU),
+ PINMUX_DATA(PTS1_DATA, PTS1_IN, PTS1_OUT, PTS1_IN_PU),
+ PINMUX_DATA(PTS0_DATA, PTS0_IN, PTS0_OUT, PTS0_IN_PU),
+
+ /* PTT GPIO */
+ PINMUX_DATA(PTT7_DATA, PTT7_IN, PTT7_OUT, PTT7_IN_PU),
+ PINMUX_DATA(PTT6_DATA, PTT6_IN, PTT6_OUT, PTT6_IN_PU),
+ PINMUX_DATA(PTT5_DATA, PTT5_IN, PTT5_OUT, PTT5_IN_PU),
+ PINMUX_DATA(PTT4_DATA, PTT4_IN, PTT4_OUT, PTT4_IN_PU),
+ PINMUX_DATA(PTT3_DATA, PTT3_IN, PTT3_OUT, PTT3_IN_PU),
+ PINMUX_DATA(PTT2_DATA, PTT2_IN, PTT2_OUT, PTT2_IN_PU),
+ PINMUX_DATA(PTT1_DATA, PTT1_IN, PTT1_OUT, PTT1_IN_PU),
+ PINMUX_DATA(PTT0_DATA, PTT0_IN, PTT0_OUT, PTT0_IN_PU),
+
+ /* PTU GPIO */
+ PINMUX_DATA(PTU7_DATA, PTU7_IN, PTU7_OUT, PTU7_IN_PU),
+ PINMUX_DATA(PTU6_DATA, PTU6_IN, PTU6_OUT, PTU6_IN_PU),
+ PINMUX_DATA(PTU5_DATA, PTU5_IN, PTU5_OUT, PTU5_IN_PU),
+ PINMUX_DATA(PTU4_DATA, PTU4_IN, PTU4_OUT, PTU4_IN_PU),
+ PINMUX_DATA(PTU3_DATA, PTU3_IN, PTU3_OUT, PTU3_IN_PU),
+ PINMUX_DATA(PTU2_DATA, PTU2_IN, PTU2_OUT, PTU2_IN_PU),
+ PINMUX_DATA(PTU1_DATA, PTU1_IN, PTU1_OUT, PTU1_IN_PU),
+ PINMUX_DATA(PTU0_DATA, PTU0_IN, PTU0_OUT, PTU0_IN_PU),
+
+ /* PTV GPIO */
+ PINMUX_DATA(PTV7_DATA, PTV7_IN, PTV7_OUT, PTV7_IN_PU),
+ PINMUX_DATA(PTV6_DATA, PTV6_IN, PTV6_OUT, PTV6_IN_PU),
+ PINMUX_DATA(PTV5_DATA, PTV5_IN, PTV5_OUT, PTV5_IN_PU),
+ PINMUX_DATA(PTV4_DATA, PTV4_IN, PTV4_OUT, PTV4_IN_PU),
+ PINMUX_DATA(PTV3_DATA, PTV3_IN, PTV3_OUT, PTV3_IN_PU),
+ PINMUX_DATA(PTV2_DATA, PTV2_IN, PTV2_OUT, PTV2_IN_PU),
+ PINMUX_DATA(PTV1_DATA, PTV1_IN, PTV1_OUT, PTV1_IN_PU),
+ PINMUX_DATA(PTV0_DATA, PTV0_IN, PTV0_OUT, PTV0_IN_PU),
+
+ /* PTW GPIO */
+ PINMUX_DATA(PTW7_DATA, PTW7_IN, PTW7_OUT, PTW7_IN_PU),
+ PINMUX_DATA(PTW6_DATA, PTW6_IN, PTW6_OUT, PTW6_IN_PU),
+ PINMUX_DATA(PTW5_DATA, PTW5_IN, PTW5_OUT, PTW5_IN_PU),
+ PINMUX_DATA(PTW4_DATA, PTW4_IN, PTW4_OUT, PTW4_IN_PU),
+ PINMUX_DATA(PTW3_DATA, PTW3_IN, PTW3_OUT, PTW3_IN_PU),
+ PINMUX_DATA(PTW2_DATA, PTW2_IN, PTW2_OUT, PTW2_IN_PU),
+ PINMUX_DATA(PTW1_DATA, PTW1_IN, PTW1_OUT, PTW1_IN_PU),
+ PINMUX_DATA(PTW0_DATA, PTW0_IN, PTW0_OUT, PTW0_IN_PU),
+
+ /* PTX GPIO */
+ PINMUX_DATA(PTX7_DATA, PTX7_IN, PTX7_OUT, PTX7_IN_PU),
+ PINMUX_DATA(PTX6_DATA, PTX6_IN, PTX6_OUT, PTX6_IN_PU),
+ PINMUX_DATA(PTX5_DATA, PTX5_IN, PTX5_OUT, PTX5_IN_PU),
+ PINMUX_DATA(PTX4_DATA, PTX4_IN, PTX4_OUT, PTX4_IN_PU),
+ PINMUX_DATA(PTX3_DATA, PTX3_IN, PTX3_OUT, PTX3_IN_PU),
+ PINMUX_DATA(PTX2_DATA, PTX2_IN, PTX2_OUT, PTX2_IN_PU),
+ PINMUX_DATA(PTX1_DATA, PTX1_IN, PTX1_OUT, PTX1_IN_PU),
+ PINMUX_DATA(PTX0_DATA, PTX0_IN, PTX0_OUT, PTX0_IN_PU),
+
+ /* PTY GPIO */
+ PINMUX_DATA(PTY7_DATA, PTY7_IN, PTY7_OUT, PTY7_IN_PU),
+ PINMUX_DATA(PTY6_DATA, PTY6_IN, PTY6_OUT, PTY6_IN_PU),
+ PINMUX_DATA(PTY5_DATA, PTY5_IN, PTY5_OUT, PTY5_IN_PU),
+ PINMUX_DATA(PTY4_DATA, PTY4_IN, PTY4_OUT, PTY4_IN_PU),
+ PINMUX_DATA(PTY3_DATA, PTY3_IN, PTY3_OUT, PTY3_IN_PU),
+ PINMUX_DATA(PTY2_DATA, PTY2_IN, PTY2_OUT, PTY2_IN_PU),
+ PINMUX_DATA(PTY1_DATA, PTY1_IN, PTY1_OUT, PTY1_IN_PU),
+ PINMUX_DATA(PTY0_DATA, PTY0_IN, PTY0_OUT, PTY0_IN_PU),
+
+ /* PTZ GPIO */
+ PINMUX_DATA(PTZ7_DATA, PTZ7_IN, PTZ7_OUT, PTZ7_IN_PU),
+ PINMUX_DATA(PTZ6_DATA, PTZ6_IN, PTZ6_OUT, PTZ6_IN_PU),
+ PINMUX_DATA(PTZ5_DATA, PTZ5_IN, PTZ5_OUT, PTZ5_IN_PU),
+ PINMUX_DATA(PTZ4_DATA, PTZ4_IN, PTZ4_OUT, PTZ4_IN_PU),
+ PINMUX_DATA(PTZ3_DATA, PTZ3_IN, PTZ3_OUT, PTZ3_IN_PU),
+ PINMUX_DATA(PTZ2_DATA, PTZ2_IN, PTZ2_OUT, PTZ2_IN_PU),
+ PINMUX_DATA(PTZ1_DATA, PTZ1_IN, PTZ1_OUT, PTZ1_IN_PU),
+ PINMUX_DATA(PTZ0_DATA, PTZ0_IN, PTZ0_OUT, PTZ0_IN_PU),
+
+ /* PTA FN */
+ PINMUX_DATA(D23_MARK, PSA15_0, PSA14_0, PTA7_FN),
+ PINMUX_DATA(D22_MARK, PSA15_0, PSA14_0, PTA6_FN),
+ PINMUX_DATA(D21_MARK, PSA15_0, PSA14_0, PTA5_FN),
+ PINMUX_DATA(D20_MARK, PSA15_0, PSA14_0, PTA4_FN),
+ PINMUX_DATA(D19_MARK, PSA15_0, PSA14_0, PTA3_FN),
+ PINMUX_DATA(D18_MARK, PSA15_0, PSA14_0, PTA2_FN),
+ PINMUX_DATA(D17_MARK, PSA15_0, PSA14_0, PTA1_FN),
+ PINMUX_DATA(D16_MARK, PSA15_0, PSA14_0, PTA0_FN),
+
+ PINMUX_DATA(KEYOUT2_MARK, PSA15_0, PSA14_1, PTA7_FN),
+ PINMUX_DATA(KEYOUT1_MARK, PSA15_0, PSA14_1, PTA6_FN),
+ PINMUX_DATA(KEYOUT0_MARK, PSA15_0, PSA14_1, PTA5_FN),
+ PINMUX_DATA(KEYIN4_MARK, PSA15_0, PSA14_1, PTA4_FN),
+ PINMUX_DATA(KEYIN3_MARK, PSA15_0, PSA14_1, PTA3_FN),
+ PINMUX_DATA(KEYIN2_MARK, PSA15_0, PSA14_1, PTA2_FN),
+ PINMUX_DATA(KEYIN1_MARK, PSA15_0, PSA14_1, PTA1_FN),
+ PINMUX_DATA(KEYIN0_MARK, PSA15_0, PSA14_1, PTA0_FN),
+
+ PINMUX_DATA(IDED15_MARK, PSA15_1, PSA14_0, PTA7_FN),
+ PINMUX_DATA(IDED14_MARK, PSA15_1, PSA14_0, PTA6_FN),
+ PINMUX_DATA(IDED13_MARK, PSA15_1, PSA14_0, PTA5_FN),
+ PINMUX_DATA(IDED12_MARK, PSA15_1, PSA14_0, PTA4_FN),
+ PINMUX_DATA(IDED11_MARK, PSA15_1, PSA14_0, PTA3_FN),
+ PINMUX_DATA(IDED10_MARK, PSA15_1, PSA14_0, PTA2_FN),
+ PINMUX_DATA(IDED9_MARK, PSA15_1, PSA14_0, PTA1_FN),
+ PINMUX_DATA(IDED8_MARK, PSA15_1, PSA14_0, PTA0_FN),
+
+ /* PTB FN */
+ PINMUX_DATA(D31_MARK, PSE15_0, PSE14_0, PTB7_FN),
+ PINMUX_DATA(D30_MARK, PSE15_0, PSE14_0, PTB6_FN),
+ PINMUX_DATA(D29_MARK, PSE11_0, PTB5_FN),
+ PINMUX_DATA(D28_MARK, PSE11_0, PTB4_FN),
+ PINMUX_DATA(D27_MARK, PSE11_0, PTB3_FN),
+ PINMUX_DATA(D26_MARK, PSA15_0, PSA14_0, PTB2_FN),
+ PINMUX_DATA(D25_MARK, PSA15_0, PSA14_0, PTB1_FN),
+ PINMUX_DATA(D24_MARK, PSA15_0, PSA14_0, PTB0_FN),
+
+ PINMUX_DATA(IDEA1_MARK, PSE15_1, PSE14_0, PTB7_FN),
+ PINMUX_DATA(IDEA0_MARK, PSE15_1, PSE14_0, PTB6_FN),
+ PINMUX_DATA(IODREQ_MARK, PSE11_1, PTB5_FN),
+ PINMUX_DATA(IDECS0_MARK, PSE11_1, PTB4_FN),
+ PINMUX_DATA(IDECS1_MARK, PSE11_1, PTB3_FN),
+ PINMUX_DATA(IDEIORD_MARK, PSA15_1, PSA14_0, PTB2_FN),
+ PINMUX_DATA(IDEIOWR_MARK, PSA15_1, PSA14_0, PTB1_FN),
+ PINMUX_DATA(IDEINT_MARK, PSA15_1, PSA14_0, PTB0_FN),
+
+ PINMUX_DATA(TPUTO1_MARK, PSE15_0, PSE14_1, PTB7_FN),
+ PINMUX_DATA(TPUTO0_MARK, PSE15_0, PSE14_1, PTB6_FN),
+
+ PINMUX_DATA(KEYOUT5_IN5_MARK, PSA15_0, PSA14_1, PTB2_FN),
+ PINMUX_DATA(KEYOUT4_IN6_MARK, PSA15_0, PSA14_1, PTB1_FN),
+ PINMUX_DATA(KEYOUT3_MARK, PSA15_0, PSA14_1, PTB0_FN),
+
+ /* PTC FN */
+ PINMUX_DATA(LCDD7_MARK, PSD5_0, PTC7_FN),
+ PINMUX_DATA(LCDD6_MARK, PSD5_0, PTC6_FN),
+ PINMUX_DATA(LCDD5_MARK, PSD5_0, PTC5_FN),
+ PINMUX_DATA(LCDD4_MARK, PSD5_0, PTC4_FN),
+ PINMUX_DATA(LCDD3_MARK, PSD5_0, PTC3_FN),
+ PINMUX_DATA(LCDD2_MARK, PSD5_0, PTC2_FN),
+ PINMUX_DATA(LCDD1_MARK, PSD5_0, PTC1_FN),
+ PINMUX_DATA(LCDD0_MARK, PSD5_0, PTC0_FN),
+
+ /* PTD FN */
+ PINMUX_DATA(LCDD15_MARK, PSD5_0, PTD7_FN),
+ PINMUX_DATA(LCDD14_MARK, PSD5_0, PTD6_FN),
+ PINMUX_DATA(LCDD13_MARK, PSD5_0, PTD5_FN),
+ PINMUX_DATA(LCDD12_MARK, PSD5_0, PTD4_FN),
+ PINMUX_DATA(LCDD11_MARK, PSD5_0, PTD3_FN),
+ PINMUX_DATA(LCDD10_MARK, PSD5_0, PTD2_FN),
+ PINMUX_DATA(LCDD9_MARK, PSD5_0, PTD1_FN),
+ PINMUX_DATA(LCDD8_MARK, PSD5_0, PTD0_FN),
+
+ /* PTE FN */
+ PINMUX_DATA(FSIMCKB_MARK, PTE7_FN),
+ PINMUX_DATA(FSIMCKA_MARK, PTE6_FN),
+
+ PINMUX_DATA(LCDD21_MARK, PSC5_0, PSC4_0, PTE5_FN),
+ PINMUX_DATA(LCDD20_MARK, PSD3_0, PSD2_0, PTE4_FN),
+ PINMUX_DATA(LCDD19_MARK, PSA3_0, PSA2_0, PTE3_FN),
+ PINMUX_DATA(LCDD18_MARK, PSA3_0, PSA2_0, PTE2_FN),
+ PINMUX_DATA(LCDD17_MARK, PSD5_0, PTE1_FN),
+ PINMUX_DATA(LCDD16_MARK, PSD5_0, PTE0_FN),
+
+ PINMUX_DATA(SCIF2_L_TXD_MARK, PSC5_0, PSC4_1, PTE5_FN),
+ PINMUX_DATA(SCIF4_SCK_MARK, PSD3_0, PSD2_1, PTE4_FN),
+ PINMUX_DATA(SCIF4_RXD_MARK, PSA3_0, PSA2_1, PTE3_FN),
+ PINMUX_DATA(SCIF4_TXD_MARK, PSA3_0, PSA2_1, PTE2_FN),
+
+ /* PTF FN */
+ PINMUX_DATA(LCDVSYN_MARK, PSD8_0, PTF7_FN),
+ PINMUX_DATA(LCDDISP_MARK, PSD10_0, PSD9_0, PTF6_FN),
+ PINMUX_DATA(LCDHSYN_MARK, PSD10_0, PSD9_0, PTF5_FN),
+ PINMUX_DATA(LCDDON_MARK, PSD8_0, PTF4_FN),
+ PINMUX_DATA(LCDDCK_MARK, PSD10_0, PSD9_0, PTF3_FN),
+ PINMUX_DATA(LCDVEPWC_MARK, PSA6_0, PTF2_FN),
+ PINMUX_DATA(LCDD23_MARK, PSC7_0, PSC6_0, PTF1_FN),
+ PINMUX_DATA(LCDD22_MARK, PSC5_0, PSC4_0, PTF0_FN),
+
+ PINMUX_DATA(LCDRS_MARK, PSD10_0, PSD9_1, PTF6_FN),
+ PINMUX_DATA(LCDCS_MARK, PSD10_0, PSD9_1, PTF5_FN),
+ PINMUX_DATA(LCDWR_MARK, PSD10_0, PSD9_1, PTF3_FN),
+
+ PINMUX_DATA(SCIF0_TXD_MARK, PSA6_1, PTF2_FN),
+ PINMUX_DATA(SCIF2_L_SCK_MARK, PSC7_0, PSC6_1, PTF1_FN),
+ PINMUX_DATA(SCIF2_L_RXD_MARK, PSC5_0, PSC4_1, PTF0_FN),
+
+ /* PTG FN */
+ PINMUX_DATA(AUDCK_MARK, PTG5_FN),
+ PINMUX_DATA(AUDSYNC_MARK, PTG4_FN),
+ PINMUX_DATA(AUDATA3_MARK, PTG3_FN),
+ PINMUX_DATA(AUDATA2_MARK, PTG2_FN),
+ PINMUX_DATA(AUDATA1_MARK, PTG1_FN),
+ PINMUX_DATA(AUDATA0_MARK, PTG0_FN),
+
+ /* PTH FN */
+ PINMUX_DATA(VIO0_VD_MARK, PTH7_FN),
+ PINMUX_DATA(VIO0_CLK_MARK, PTH6_FN),
+ PINMUX_DATA(VIO0_D7_MARK, PTH5_FN),
+ PINMUX_DATA(VIO0_D6_MARK, PTH4_FN),
+ PINMUX_DATA(VIO0_D5_MARK, PTH3_FN),
+ PINMUX_DATA(VIO0_D4_MARK, PTH2_FN),
+ PINMUX_DATA(VIO0_D3_MARK, PTH1_FN),
+ PINMUX_DATA(VIO0_D2_MARK, PTH0_FN),
+
+ /* PTJ FN */
+ PINMUX_DATA(PDSTATUS_MARK, PTJ7_FN),
+ PINMUX_DATA(STATUS2_MARK, PTJ6_FN),
+ PINMUX_DATA(STATUS0_MARK, PTJ5_FN),
+ PINMUX_DATA(A25_MARK, PSA8_0, PTJ3_FN),
+ PINMUX_DATA(BS_MARK, PSA8_1, PTJ3_FN),
+ PINMUX_DATA(A24_MARK, PTJ2_FN),
+ PINMUX_DATA(A23_MARK, PTJ1_FN),
+ PINMUX_DATA(A22_MARK, PTJ0_FN),
+
+ /* PTK FN */
+ PINMUX_DATA(VIO1_D5_MARK, PSB7_0, PSB6_0, PTK7_FN),
+ PINMUX_DATA(VIO1_D4_MARK, PSB7_0, PSB6_0, PTK6_FN),
+ PINMUX_DATA(VIO1_D3_MARK, PSB7_0, PSB6_0, PTK5_FN),
+ PINMUX_DATA(VIO1_D2_MARK, PSB7_0, PSB6_0, PTK4_FN),
+ PINMUX_DATA(VIO1_D1_MARK, PSB7_0, PSB6_0, PTK3_FN),
+ PINMUX_DATA(VIO1_D0_MARK, PSB7_0, PSB6_0, PTK2_FN),
+
+ PINMUX_DATA(VIO0_D13_MARK, PSB7_0, PSB6_1, PTK7_FN),
+ PINMUX_DATA(VIO0_D12_MARK, PSB7_0, PSB6_1, PTK6_FN),
+ PINMUX_DATA(VIO0_D11_MARK, PSB7_0, PSB6_1, PTK5_FN),
+ PINMUX_DATA(VIO0_D10_MARK, PSB7_0, PSB6_1, PTK4_FN),
+ PINMUX_DATA(VIO0_D9_MARK, PSB7_0, PSB6_1, PTK3_FN),
+ PINMUX_DATA(VIO0_D8_MARK, PSB7_0, PSB6_1, PTK2_FN),
+
+ PINMUX_DATA(IDED5_MARK, PSB7_1, PSB6_0, PTK7_FN),
+ PINMUX_DATA(IDED4_MARK, PSB7_1, PSB6_0, PTK6_FN),
+ PINMUX_DATA(IDED3_MARK, PSB7_1, PSB6_0, PTK5_FN),
+ PINMUX_DATA(IDED2_MARK, PSB7_1, PSB6_0, PTK4_FN),
+ PINMUX_DATA(IDED1_MARK, PSB7_1, PSB6_0, PTK3_FN),
+ PINMUX_DATA(IDED0_MARK, PSB7_1, PSB6_0, PTK2_FN),
+
+ PINMUX_DATA(VIO0_FLD_MARK, PTK1_FN),
+ PINMUX_DATA(VIO0_HD_MARK, PTK0_FN),
+
+ /* PTL FN */
+ PINMUX_DATA(DV_D5_MARK, PSB9_0, PSB8_0, PTL7_FN),
+ PINMUX_DATA(DV_D4_MARK, PSB9_0, PSB8_0, PTL6_FN),
+ PINMUX_DATA(DV_D3_MARK, PSE7_0, PSE6_0, PTL5_FN),
+ PINMUX_DATA(DV_D2_MARK, PSC9_0, PSC8_0, PTL4_FN),
+ PINMUX_DATA(DV_D1_MARK, PSC9_0, PSC8_0, PTL3_FN),
+ PINMUX_DATA(DV_D0_MARK, PSC9_0, PSC8_0, PTL2_FN),
+ PINMUX_DATA(DV_D15_MARK, PSD4_0, PTL1_FN),
+ PINMUX_DATA(DV_D14_MARK, PSE5_0, PSE4_0, PTL0_FN),
+
+ PINMUX_DATA(SCIF3_V_SCK_MARK, PSB9_0, PSB8_1, PTL7_FN),
+ PINMUX_DATA(SCIF3_V_RXD_MARK, PSB9_0, PSB8_1, PTL6_FN),
+ PINMUX_DATA(SCIF3_V_TXD_MARK, PSE7_0, PSE6_1, PTL5_FN),
+ PINMUX_DATA(SCIF1_SCK_MARK, PSC9_0, PSC8_1, PTL4_FN),
+ PINMUX_DATA(SCIF1_RXD_MARK, PSC9_0, PSC8_1, PTL3_FN),
+ PINMUX_DATA(SCIF1_TXD_MARK, PSC9_0, PSC8_1, PTL2_FN),
+
+ PINMUX_DATA(RMII_RXD0_MARK, PSB9_1, PSB8_0, PTL7_FN),
+ PINMUX_DATA(RMII_RXD1_MARK, PSB9_1, PSB8_0, PTL6_FN),
+ PINMUX_DATA(RMII_REF_CLK_MARK, PSE7_1, PSE6_0, PTL5_FN),
+ PINMUX_DATA(RMII_TX_EN_MARK, PSC9_1, PSC8_0, PTL4_FN),
+ PINMUX_DATA(RMII_TXD0_MARK, PSC9_1, PSC8_0, PTL3_FN),
+ PINMUX_DATA(RMII_TXD1_MARK, PSC9_1, PSC8_0, PTL2_FN),
+
+ PINMUX_DATA(MSIOF0_MCK_MARK, PSE5_0, PSE4_1, PTL0_FN),
+
+ /* PTM FN */
+ PINMUX_DATA(DV_D13_MARK, PSC13_0, PSC12_0, PTM7_FN),
+ PINMUX_DATA(DV_D12_MARK, PSC13_0, PSC12_0, PTM6_FN),
+ PINMUX_DATA(DV_D11_MARK, PSC13_0, PSC12_0, PTM5_FN),
+ PINMUX_DATA(DV_D10_MARK, PSC13_0, PSC12_0, PTM4_FN),
+ PINMUX_DATA(DV_D9_MARK, PSC11_0, PSC10_0, PTM3_FN),
+ PINMUX_DATA(DV_D8_MARK, PSC11_0, PSC10_0, PTM2_FN),
+
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PSC13_0, PSC12_1, PTM7_FN),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PSC13_0, PSC12_1, PTM6_FN),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PSC13_0, PSC12_1, PTM5_FN),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PSC13_0, PSC12_1, PTM4_FN),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PSC11_0, PSC10_1, PTM3_FN),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PSC11_1, PSC10_0, PTM3_FN),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PSC11_0, PSC10_1, PTM2_FN),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PSC11_1, PSC10_0, PTM2_FN),
+
+ PINMUX_DATA(LCDVCPWC_MARK, PSA6_0, PTM1_FN),
+ PINMUX_DATA(LCDRD_MARK, PSA7_0, PTM0_FN),
+
+ PINMUX_DATA(SCIF0_RXD_MARK, PSA6_1, PTM1_FN),
+ PINMUX_DATA(SCIF0_SCK_MARK, PSA7_1, PTM0_FN),
+
+ /* PTN FN */
+ PINMUX_DATA(VIO0_D1_MARK, PTN7_FN),
+ PINMUX_DATA(VIO0_D0_MARK, PTN6_FN),
+
+ PINMUX_DATA(DV_CLKI_MARK, PSD11_0, PTN5_FN),
+ PINMUX_DATA(DV_CLK_MARK, PSD13_0, PSD12_0, PTN4_FN),
+ PINMUX_DATA(DV_VSYNC_MARK, PSD15_0, PSD14_0, PTN3_FN),
+ PINMUX_DATA(DV_HSYNC_MARK, PSB5_0, PSB4_0, PTN2_FN),
+ PINMUX_DATA(DV_D7_MARK, PSB3_0, PSB2_0, PTN1_FN),
+ PINMUX_DATA(DV_D6_MARK, PSB1_0, PSB0_0, PTN0_FN),
+
+ PINMUX_DATA(SCIF2_V_SCK_MARK, PSD13_0, PSD12_1, PTN4_FN),
+ PINMUX_DATA(SCIF2_V_RXD_MARK, PSD15_0, PSD14_1, PTN3_FN),
+ PINMUX_DATA(SCIF2_V_TXD_MARK, PSB5_0, PSB4_1, PTN2_FN),
+ PINMUX_DATA(SCIF3_V_CTS_MARK, PSB3_0, PSB2_1, PTN1_FN),
+ PINMUX_DATA(SCIF3_V_RTS_MARK, PSB1_0, PSB0_1, PTN0_FN),
+
+ PINMUX_DATA(RMII_RX_ER_MARK, PSB3_1, PSB2_0, PTN1_FN),
+ PINMUX_DATA(RMII_CRS_DV_MARK, PSB1_1, PSB0_0, PTN0_FN),
+
+ /* PTQ FN */
+ PINMUX_DATA(D7_MARK, PTQ7_FN),
+ PINMUX_DATA(D6_MARK, PTQ6_FN),
+ PINMUX_DATA(D5_MARK, PTQ5_FN),
+ PINMUX_DATA(D4_MARK, PTQ4_FN),
+ PINMUX_DATA(D3_MARK, PTQ3_FN),
+ PINMUX_DATA(D2_MARK, PTQ2_FN),
+ PINMUX_DATA(D1_MARK, PTQ1_FN),
+ PINMUX_DATA(D0_MARK, PTQ0_FN),
+
+ /* PTR FN */
+ PINMUX_DATA(CS6B_CE1B_MARK, PTR7_FN),
+ PINMUX_DATA(CS6A_CE2B_MARK, PTR6_FN),
+ PINMUX_DATA(CS5B_CE1A_MARK, PTR5_FN),
+ PINMUX_DATA(CS5A_CE2A_MARK, PTR4_FN),
+ PINMUX_DATA(IOIS16_MARK, PSA5_0, PTR3_FN),
+ PINMUX_DATA(WAIT_MARK, PTR2_FN),
+ PINMUX_DATA(WE3_ICIOWR_MARK, PSA1_0, PSA0_0, PTR1_FN),
+ PINMUX_DATA(WE2_ICIORD_MARK, PSD1_0, PSD0_0, PTR0_FN),
+
+ PINMUX_DATA(LCDLCLK_MARK, PSA5_1, PTR3_FN),
+
+ PINMUX_DATA(IDEA2_MARK, PSD1_1, PSD0_0, PTR0_FN),
+
+ PINMUX_DATA(TPUTO3_MARK, PSA1_0, PSA0_1, PTR1_FN),
+ PINMUX_DATA(TPUTI3_MARK, PSA1_1, PSA0_0, PTR1_FN),
+ PINMUX_DATA(TPUTO2_MARK, PSD1_0, PSD0_1, PTR0_FN),
+
+ /* PTS FN */
+ PINMUX_DATA(VIO_CKO_MARK, PTS6_FN),
+
+ PINMUX_DATA(TPUTI2_MARK, PSE9_0, PSE8_1, PTS5_FN),
+
+ PINMUX_DATA(IDEIORDY_MARK, PSE9_1, PSE8_0, PTS5_FN),
+
+ PINMUX_DATA(VIO1_FLD_MARK, PSE9_0, PSE8_0, PTS5_FN),
+ PINMUX_DATA(VIO1_HD_MARK, PSA10_0, PTS4_FN),
+ PINMUX_DATA(VIO1_VD_MARK, PSA9_0, PTS3_FN),
+ PINMUX_DATA(VIO1_CLK_MARK, PSA9_0, PTS2_FN),
+ PINMUX_DATA(VIO1_D7_MARK, PSB7_0, PSB6_0, PTS1_FN),
+ PINMUX_DATA(VIO1_D6_MARK, PSB7_0, PSB6_0, PTS0_FN),
+
+ PINMUX_DATA(SCIF5_SCK_MARK, PSA10_1, PTS4_FN),
+ PINMUX_DATA(SCIF5_RXD_MARK, PSA9_1, PTS3_FN),
+ PINMUX_DATA(SCIF5_TXD_MARK, PSA9_1, PTS2_FN),
+
+ PINMUX_DATA(VIO0_D15_MARK, PSB7_0, PSB6_1, PTS1_FN),
+ PINMUX_DATA(VIO0_D14_MARK, PSB7_0, PSB6_1, PTS0_FN),
+
+ PINMUX_DATA(IDED7_MARK, PSB7_1, PSB6_0, PTS1_FN),
+ PINMUX_DATA(IDED6_MARK, PSB7_1, PSB6_0, PTS0_FN),
+
+ /* PTT FN */
+ PINMUX_DATA(D15_MARK, PTT7_FN),
+ PINMUX_DATA(D14_MARK, PTT6_FN),
+ PINMUX_DATA(D13_MARK, PTT5_FN),
+ PINMUX_DATA(D12_MARK, PTT4_FN),
+ PINMUX_DATA(D11_MARK, PTT3_FN),
+ PINMUX_DATA(D10_MARK, PTT2_FN),
+ PINMUX_DATA(D9_MARK, PTT1_FN),
+ PINMUX_DATA(D8_MARK, PTT0_FN),
+
+ /* PTU FN */
+ PINMUX_DATA(DMAC_DACK0_MARK, PTU7_FN),
+ PINMUX_DATA(DMAC_DREQ0_MARK, PTU6_FN),
+
+ PINMUX_DATA(FSIOASD_MARK, PSE1_0, PTU5_FN),
+ PINMUX_DATA(FSIIABCK_MARK, PSE1_0, PTU4_FN),
+ PINMUX_DATA(FSIIALRCK_MARK, PSE1_0, PTU3_FN),
+ PINMUX_DATA(FSIOABCK_MARK, PSE1_0, PTU2_FN),
+ PINMUX_DATA(FSIOALRCK_MARK, PSE1_0, PTU1_FN),
+ PINMUX_DATA(CLKAUDIOAO_MARK, PSE0_0, PTU0_FN),
+
+ /* PTV FN */
+ PINMUX_DATA(FSIIBSD_MARK, PSD7_0, PSD6_0, PTV7_FN),
+ PINMUX_DATA(FSIOBSD_MARK, PSD7_0, PSD6_0, PTV6_FN),
+ PINMUX_DATA(FSIIBBCK_MARK, PSC15_0, PSC14_0, PTV5_FN),
+ PINMUX_DATA(FSIIBLRCK_MARK, PSC15_0, PSC14_0, PTV4_FN),
+ PINMUX_DATA(FSIOBBCK_MARK, PSC15_0, PSC14_0, PTV3_FN),
+ PINMUX_DATA(FSIOBLRCK_MARK, PSC15_0, PSC14_0, PTV2_FN),
+ PINMUX_DATA(CLKAUDIOBO_MARK, PSE3_0, PSE2_0, PTV1_FN),
+ PINMUX_DATA(FSIIASD_MARK, PSE10_0, PTV0_FN),
+
+ PINMUX_DATA(MSIOF1_SS2_MARK, PSD7_0, PSD6_1, PTV7_FN),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PSD7_1, PSD6_0, PTV7_FN),
+ PINMUX_DATA(MSIOF1_SS1_MARK, PSD7_0, PSD6_1, PTV6_FN),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PSD7_1, PSD6_0, PTV6_FN),
+ PINMUX_DATA(MSIOF1_RXD_MARK, PSC15_0, PSC14_1, PTV5_FN),
+ PINMUX_DATA(MSIOF1_TSYNC_MARK, PSC15_0, PSC14_1, PTV4_FN),
+ PINMUX_DATA(MSIOF1_TSCK_MARK, PSC15_0, PSC14_1, PTV3_FN),
+ PINMUX_DATA(MSIOF1_TXD_MARK, PSC15_0, PSC14_1, PTV2_FN),
+ PINMUX_DATA(MSIOF1_MCK_MARK, PSE3_0, PSE2_1, PTV1_FN),
+
+ /* PTW FN */
+ PINMUX_DATA(MMC_D7_MARK, PSE13_0, PSE12_0, PTW7_FN),
+ PINMUX_DATA(MMC_D6_MARK, PSE13_0, PSE12_0, PTW6_FN),
+ PINMUX_DATA(MMC_D5_MARK, PSE13_0, PSE12_0, PTW5_FN),
+ PINMUX_DATA(MMC_D4_MARK, PSE13_0, PSE12_0, PTW4_FN),
+ PINMUX_DATA(MMC_D3_MARK, PSA13_0, PTW3_FN),
+ PINMUX_DATA(MMC_D2_MARK, PSA13_0, PTW2_FN),
+ PINMUX_DATA(MMC_D1_MARK, PSA13_0, PTW1_FN),
+ PINMUX_DATA(MMC_D0_MARK, PSA13_0, PTW0_FN),
+
+ PINMUX_DATA(SDHI1CD_MARK, PSE13_0, PSE12_1, PTW7_FN),
+ PINMUX_DATA(SDHI1WP_MARK, PSE13_0, PSE12_1, PTW6_FN),
+ PINMUX_DATA(SDHI1D3_MARK, PSE13_0, PSE12_1, PTW5_FN),
+ PINMUX_DATA(SDHI1D2_MARK, PSE13_0, PSE12_1, PTW4_FN),
+ PINMUX_DATA(SDHI1D1_MARK, PSA13_1, PTW3_FN),
+ PINMUX_DATA(SDHI1D0_MARK, PSA13_1, PTW2_FN),
+ PINMUX_DATA(SDHI1CMD_MARK, PSA13_1, PTW1_FN),
+ PINMUX_DATA(SDHI1CLK_MARK, PSA13_1, PTW0_FN),
+
+ PINMUX_DATA(IODACK_MARK, PSE13_1, PSE12_0, PTW7_FN),
+ PINMUX_DATA(IDERST_MARK, PSE13_1, PSE12_0, PTW6_FN),
+ PINMUX_DATA(EXBUF_ENB_MARK, PSE13_1, PSE12_0, PTW5_FN),
+ PINMUX_DATA(DIRECTION_MARK, PSE13_1, PSE12_0, PTW4_FN),
+
+ /* PTX FN */
+ PINMUX_DATA(DMAC_DACK1_MARK, PSA12_0, PTX7_FN),
+ PINMUX_DATA(DMAC_DREQ1_MARK, PSA12_0, PTX6_FN),
+
+ PINMUX_DATA(IRDA_OUT_MARK, PSA12_1, PTX7_FN),
+ PINMUX_DATA(IRDA_IN_MARK, PSA12_1, PTX6_FN),
+
+ PINMUX_DATA(TSIF_TS0_SDAT_MARK, PSC0_0, PTX5_FN),
+ PINMUX_DATA(TSIF_TS0_SCK_MARK, PSC1_0, PTX4_FN),
+ PINMUX_DATA(TSIF_TS0_SDEN_MARK, PSC2_0, PTX3_FN),
+ PINMUX_DATA(TSIF_TS0_SPSYNC_MARK, PTX2_FN),
+
+ PINMUX_DATA(LNKSTA_MARK, PSC0_1, PTX5_FN),
+ PINMUX_DATA(MDIO_MARK, PSC1_1, PTX4_FN),
+ PINMUX_DATA(MDC_MARK, PSC2_1, PTX3_FN),
+
+ PINMUX_DATA(MMC_CLK_MARK, PTX1_FN),
+ PINMUX_DATA(MMC_CMD_MARK, PTX0_FN),
+
+ /* PTY FN */
+ PINMUX_DATA(SDHI0CD_MARK, PTY7_FN),
+ PINMUX_DATA(SDHI0WP_MARK, PTY6_FN),
+ PINMUX_DATA(SDHI0D3_MARK, PTY5_FN),
+ PINMUX_DATA(SDHI0D2_MARK, PTY4_FN),
+ PINMUX_DATA(SDHI0D1_MARK, PTY3_FN),
+ PINMUX_DATA(SDHI0D0_MARK, PTY2_FN),
+ PINMUX_DATA(SDHI0CMD_MARK, PTY1_FN),
+ PINMUX_DATA(SDHI0CLK_MARK, PTY0_FN),
+
+ /* PTZ FN */
+ PINMUX_DATA(INTC_IRQ7_MARK, PSB10_0, PTZ7_FN),
+ PINMUX_DATA(INTC_IRQ6_MARK, PSB11_0, PTZ6_FN),
+ PINMUX_DATA(INTC_IRQ5_MARK, PSB12_0, PTZ5_FN),
+ PINMUX_DATA(INTC_IRQ4_MARK, PSB13_0, PTZ4_FN),
+ PINMUX_DATA(INTC_IRQ3_MARK, PSB14_0, PTZ3_FN),
+ PINMUX_DATA(INTC_IRQ2_MARK, PTZ2_FN),
+ PINMUX_DATA(INTC_IRQ1_MARK, PTZ1_FN),
+ PINMUX_DATA(INTC_IRQ0_MARK, PTZ0_FN),
+
+ PINMUX_DATA(SCIF3_I_CTS_MARK, PSB10_1, PTZ7_FN),
+ PINMUX_DATA(SCIF3_I_RTS_MARK, PSB11_1, PTZ6_FN),
+ PINMUX_DATA(SCIF3_I_SCK_MARK, PSB12_1, PTZ5_FN),
+ PINMUX_DATA(SCIF3_I_RXD_MARK, PSB13_1, PTZ4_FN),
+ PINMUX_DATA(SCIF3_I_TXD_MARK, PSB14_1, PTZ3_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ /* PTA */
+ PINMUX_GPIO(GPIO_PTA7, PTA7_DATA),
+ PINMUX_GPIO(GPIO_PTA6, PTA6_DATA),
+ PINMUX_GPIO(GPIO_PTA5, PTA5_DATA),
+ PINMUX_GPIO(GPIO_PTA4, PTA4_DATA),
+ PINMUX_GPIO(GPIO_PTA3, PTA3_DATA),
+ PINMUX_GPIO(GPIO_PTA2, PTA2_DATA),
+ PINMUX_GPIO(GPIO_PTA1, PTA1_DATA),
+ PINMUX_GPIO(GPIO_PTA0, PTA0_DATA),
+
+ /* PTB */
+ PINMUX_GPIO(GPIO_PTB7, PTB7_DATA),
+ PINMUX_GPIO(GPIO_PTB6, PTB6_DATA),
+ PINMUX_GPIO(GPIO_PTB5, PTB5_DATA),
+ PINMUX_GPIO(GPIO_PTB4, PTB4_DATA),
+ PINMUX_GPIO(GPIO_PTB3, PTB3_DATA),
+ PINMUX_GPIO(GPIO_PTB2, PTB2_DATA),
+ PINMUX_GPIO(GPIO_PTB1, PTB1_DATA),
+ PINMUX_GPIO(GPIO_PTB0, PTB0_DATA),
+
+ /* PTC */
+ PINMUX_GPIO(GPIO_PTC7, PTC7_DATA),
+ PINMUX_GPIO(GPIO_PTC6, PTC6_DATA),
+ PINMUX_GPIO(GPIO_PTC5, PTC5_DATA),
+ PINMUX_GPIO(GPIO_PTC4, PTC4_DATA),
+ PINMUX_GPIO(GPIO_PTC3, PTC3_DATA),
+ PINMUX_GPIO(GPIO_PTC2, PTC2_DATA),
+ PINMUX_GPIO(GPIO_PTC1, PTC1_DATA),
+ PINMUX_GPIO(GPIO_PTC0, PTC0_DATA),
+
+ /* PTD */
+ PINMUX_GPIO(GPIO_PTD7, PTD7_DATA),
+ PINMUX_GPIO(GPIO_PTD6, PTD6_DATA),
+ PINMUX_GPIO(GPIO_PTD5, PTD5_DATA),
+ PINMUX_GPIO(GPIO_PTD4, PTD4_DATA),
+ PINMUX_GPIO(GPIO_PTD3, PTD3_DATA),
+ PINMUX_GPIO(GPIO_PTD2, PTD2_DATA),
+ PINMUX_GPIO(GPIO_PTD1, PTD1_DATA),
+ PINMUX_GPIO(GPIO_PTD0, PTD0_DATA),
+
+ /* PTE */
+ PINMUX_GPIO(GPIO_PTE7, PTE7_DATA),
+ PINMUX_GPIO(GPIO_PTE6, PTE6_DATA),
+ PINMUX_GPIO(GPIO_PTE5, PTE5_DATA),
+ PINMUX_GPIO(GPIO_PTE4, PTE4_DATA),
+ PINMUX_GPIO(GPIO_PTE3, PTE3_DATA),
+ PINMUX_GPIO(GPIO_PTE2, PTE2_DATA),
+ PINMUX_GPIO(GPIO_PTE1, PTE1_DATA),
+ PINMUX_GPIO(GPIO_PTE0, PTE0_DATA),
+
+ /* PTF */
+ PINMUX_GPIO(GPIO_PTF7, PTF7_DATA),
+ PINMUX_GPIO(GPIO_PTF6, PTF6_DATA),
+ PINMUX_GPIO(GPIO_PTF5, PTF5_DATA),
+ PINMUX_GPIO(GPIO_PTF4, PTF4_DATA),
+ PINMUX_GPIO(GPIO_PTF3, PTF3_DATA),
+ PINMUX_GPIO(GPIO_PTF2, PTF2_DATA),
+ PINMUX_GPIO(GPIO_PTF1, PTF1_DATA),
+ PINMUX_GPIO(GPIO_PTF0, PTF0_DATA),
+
+ /* PTG */
+ PINMUX_GPIO(GPIO_PTG5, PTG5_DATA),
+ PINMUX_GPIO(GPIO_PTG4, PTG4_DATA),
+ PINMUX_GPIO(GPIO_PTG3, PTG3_DATA),
+ PINMUX_GPIO(GPIO_PTG2, PTG2_DATA),
+ PINMUX_GPIO(GPIO_PTG1, PTG1_DATA),
+ PINMUX_GPIO(GPIO_PTG0, PTG0_DATA),
+
+ /* PTH */
+ PINMUX_GPIO(GPIO_PTH7, PTH7_DATA),
+ PINMUX_GPIO(GPIO_PTH6, PTH6_DATA),
+ PINMUX_GPIO(GPIO_PTH5, PTH5_DATA),
+ PINMUX_GPIO(GPIO_PTH4, PTH4_DATA),
+ PINMUX_GPIO(GPIO_PTH3, PTH3_DATA),
+ PINMUX_GPIO(GPIO_PTH2, PTH2_DATA),
+ PINMUX_GPIO(GPIO_PTH1, PTH1_DATA),
+ PINMUX_GPIO(GPIO_PTH0, PTH0_DATA),
+
+ /* PTJ */
+ PINMUX_GPIO(GPIO_PTJ7, PTJ7_DATA),
+ PINMUX_GPIO(GPIO_PTJ6, PTJ6_DATA),
+ PINMUX_GPIO(GPIO_PTJ5, PTJ5_DATA),
+ PINMUX_GPIO(GPIO_PTJ3, PTJ3_DATA),
+ PINMUX_GPIO(GPIO_PTJ2, PTJ2_DATA),
+ PINMUX_GPIO(GPIO_PTJ1, PTJ1_DATA),
+ PINMUX_GPIO(GPIO_PTJ0, PTJ0_DATA),
+
+ /* PTK */
+ PINMUX_GPIO(GPIO_PTK7, PTK7_DATA),
+ PINMUX_GPIO(GPIO_PTK6, PTK6_DATA),
+ PINMUX_GPIO(GPIO_PTK5, PTK5_DATA),
+ PINMUX_GPIO(GPIO_PTK4, PTK4_DATA),
+ PINMUX_GPIO(GPIO_PTK3, PTK3_DATA),
+ PINMUX_GPIO(GPIO_PTK2, PTK2_DATA),
+ PINMUX_GPIO(GPIO_PTK1, PTK1_DATA),
+ PINMUX_GPIO(GPIO_PTK0, PTK0_DATA),
+
+ /* PTL */
+ PINMUX_GPIO(GPIO_PTL7, PTL7_DATA),
+ PINMUX_GPIO(GPIO_PTL6, PTL6_DATA),
+ PINMUX_GPIO(GPIO_PTL5, PTL5_DATA),
+ PINMUX_GPIO(GPIO_PTL4, PTL4_DATA),
+ PINMUX_GPIO(GPIO_PTL3, PTL3_DATA),
+ PINMUX_GPIO(GPIO_PTL2, PTL2_DATA),
+ PINMUX_GPIO(GPIO_PTL1, PTL1_DATA),
+ PINMUX_GPIO(GPIO_PTL0, PTL0_DATA),
+
+ /* PTM */
+ PINMUX_GPIO(GPIO_PTM7, PTM7_DATA),
+ PINMUX_GPIO(GPIO_PTM6, PTM6_DATA),
+ PINMUX_GPIO(GPIO_PTM5, PTM5_DATA),
+ PINMUX_GPIO(GPIO_PTM4, PTM4_DATA),
+ PINMUX_GPIO(GPIO_PTM3, PTM3_DATA),
+ PINMUX_GPIO(GPIO_PTM2, PTM2_DATA),
+ PINMUX_GPIO(GPIO_PTM1, PTM1_DATA),
+ PINMUX_GPIO(GPIO_PTM0, PTM0_DATA),
+
+ /* PTN */
+ PINMUX_GPIO(GPIO_PTN7, PTN7_DATA),
+ PINMUX_GPIO(GPIO_PTN6, PTN6_DATA),
+ PINMUX_GPIO(GPIO_PTN5, PTN5_DATA),
+ PINMUX_GPIO(GPIO_PTN4, PTN4_DATA),
+ PINMUX_GPIO(GPIO_PTN3, PTN3_DATA),
+ PINMUX_GPIO(GPIO_PTN2, PTN2_DATA),
+ PINMUX_GPIO(GPIO_PTN1, PTN1_DATA),
+ PINMUX_GPIO(GPIO_PTN0, PTN0_DATA),
+
+ /* PTQ */
+ PINMUX_GPIO(GPIO_PTQ7, PTQ7_DATA),
+ PINMUX_GPIO(GPIO_PTQ6, PTQ6_DATA),
+ PINMUX_GPIO(GPIO_PTQ5, PTQ5_DATA),
+ PINMUX_GPIO(GPIO_PTQ4, PTQ4_DATA),
+ PINMUX_GPIO(GPIO_PTQ3, PTQ3_DATA),
+ PINMUX_GPIO(GPIO_PTQ2, PTQ2_DATA),
+ PINMUX_GPIO(GPIO_PTQ1, PTQ1_DATA),
+ PINMUX_GPIO(GPIO_PTQ0, PTQ0_DATA),
+
+ /* PTR */
+ PINMUX_GPIO(GPIO_PTR7, PTR7_DATA),
+ PINMUX_GPIO(GPIO_PTR6, PTR6_DATA),
+ PINMUX_GPIO(GPIO_PTR5, PTR5_DATA),
+ PINMUX_GPIO(GPIO_PTR4, PTR4_DATA),
+ PINMUX_GPIO(GPIO_PTR3, PTR3_DATA),
+ PINMUX_GPIO(GPIO_PTR2, PTR2_DATA),
+ PINMUX_GPIO(GPIO_PTR1, PTR1_DATA),
+ PINMUX_GPIO(GPIO_PTR0, PTR0_DATA),
+
+ /* PTS */
+ PINMUX_GPIO(GPIO_PTS6, PTS6_DATA),
+ PINMUX_GPIO(GPIO_PTS5, PTS5_DATA),
+ PINMUX_GPIO(GPIO_PTS4, PTS4_DATA),
+ PINMUX_GPIO(GPIO_PTS3, PTS3_DATA),
+ PINMUX_GPIO(GPIO_PTS2, PTS2_DATA),
+ PINMUX_GPIO(GPIO_PTS1, PTS1_DATA),
+ PINMUX_GPIO(GPIO_PTS0, PTS0_DATA),
+
+ /* PTT */
+ PINMUX_GPIO(GPIO_PTT7, PTT7_DATA),
+ PINMUX_GPIO(GPIO_PTT6, PTT6_DATA),
+ PINMUX_GPIO(GPIO_PTT5, PTT5_DATA),
+ PINMUX_GPIO(GPIO_PTT4, PTT4_DATA),
+ PINMUX_GPIO(GPIO_PTT3, PTT3_DATA),
+ PINMUX_GPIO(GPIO_PTT2, PTT2_DATA),
+ PINMUX_GPIO(GPIO_PTT1, PTT1_DATA),
+ PINMUX_GPIO(GPIO_PTT0, PTT0_DATA),
+
+ /* PTU */
+ PINMUX_GPIO(GPIO_PTU7, PTU7_DATA),
+ PINMUX_GPIO(GPIO_PTU6, PTU6_DATA),
+ PINMUX_GPIO(GPIO_PTU5, PTU5_DATA),
+ PINMUX_GPIO(GPIO_PTU4, PTU4_DATA),
+ PINMUX_GPIO(GPIO_PTU3, PTU3_DATA),
+ PINMUX_GPIO(GPIO_PTU2, PTU2_DATA),
+ PINMUX_GPIO(GPIO_PTU1, PTU1_DATA),
+ PINMUX_GPIO(GPIO_PTU0, PTU0_DATA),
+
+ /* PTV */
+ PINMUX_GPIO(GPIO_PTV7, PTV7_DATA),
+ PINMUX_GPIO(GPIO_PTV6, PTV6_DATA),
+ PINMUX_GPIO(GPIO_PTV5, PTV5_DATA),
+ PINMUX_GPIO(GPIO_PTV4, PTV4_DATA),
+ PINMUX_GPIO(GPIO_PTV3, PTV3_DATA),
+ PINMUX_GPIO(GPIO_PTV2, PTV2_DATA),
+ PINMUX_GPIO(GPIO_PTV1, PTV1_DATA),
+ PINMUX_GPIO(GPIO_PTV0, PTV0_DATA),
+
+ /* PTW */
+ PINMUX_GPIO(GPIO_PTW7, PTW7_DATA),
+ PINMUX_GPIO(GPIO_PTW6, PTW6_DATA),
+ PINMUX_GPIO(GPIO_PTW5, PTW5_DATA),
+ PINMUX_GPIO(GPIO_PTW4, PTW4_DATA),
+ PINMUX_GPIO(GPIO_PTW3, PTW3_DATA),
+ PINMUX_GPIO(GPIO_PTW2, PTW2_DATA),
+ PINMUX_GPIO(GPIO_PTW1, PTW1_DATA),
+ PINMUX_GPIO(GPIO_PTW0, PTW0_DATA),
+
+ /* PTX */
+ PINMUX_GPIO(GPIO_PTX7, PTX7_DATA),
+ PINMUX_GPIO(GPIO_PTX6, PTX6_DATA),
+ PINMUX_GPIO(GPIO_PTX5, PTX5_DATA),
+ PINMUX_GPIO(GPIO_PTX4, PTX4_DATA),
+ PINMUX_GPIO(GPIO_PTX3, PTX3_DATA),
+ PINMUX_GPIO(GPIO_PTX2, PTX2_DATA),
+ PINMUX_GPIO(GPIO_PTX1, PTX1_DATA),
+ PINMUX_GPIO(GPIO_PTX0, PTX0_DATA),
+
+ /* PTY */
+ PINMUX_GPIO(GPIO_PTY7, PTY7_DATA),
+ PINMUX_GPIO(GPIO_PTY6, PTY6_DATA),
+ PINMUX_GPIO(GPIO_PTY5, PTY5_DATA),
+ PINMUX_GPIO(GPIO_PTY4, PTY4_DATA),
+ PINMUX_GPIO(GPIO_PTY3, PTY3_DATA),
+ PINMUX_GPIO(GPIO_PTY2, PTY2_DATA),
+ PINMUX_GPIO(GPIO_PTY1, PTY1_DATA),
+ PINMUX_GPIO(GPIO_PTY0, PTY0_DATA),
+
+ /* PTZ */
+ PINMUX_GPIO(GPIO_PTZ7, PTZ7_DATA),
+ PINMUX_GPIO(GPIO_PTZ6, PTZ6_DATA),
+ PINMUX_GPIO(GPIO_PTZ5, PTZ5_DATA),
+ PINMUX_GPIO(GPIO_PTZ4, PTZ4_DATA),
+ PINMUX_GPIO(GPIO_PTZ3, PTZ3_DATA),
+ PINMUX_GPIO(GPIO_PTZ2, PTZ2_DATA),
+ PINMUX_GPIO(GPIO_PTZ1, PTZ1_DATA),
+ PINMUX_GPIO(GPIO_PTZ0, PTZ0_DATA),
+
+ /* BSC */
+ PINMUX_GPIO(GPIO_FN_D31, D31_MARK),
+ PINMUX_GPIO(GPIO_FN_D30, D30_MARK),
+ PINMUX_GPIO(GPIO_FN_D29, D29_MARK),
+ PINMUX_GPIO(GPIO_FN_D28, D28_MARK),
+ PINMUX_GPIO(GPIO_FN_D27, D27_MARK),
+ PINMUX_GPIO(GPIO_FN_D26, D26_MARK),
+ PINMUX_GPIO(GPIO_FN_D25, D25_MARK),
+ PINMUX_GPIO(GPIO_FN_D24, D24_MARK),
+ PINMUX_GPIO(GPIO_FN_D23, D23_MARK),
+ PINMUX_GPIO(GPIO_FN_D22, D22_MARK),
+ PINMUX_GPIO(GPIO_FN_D21, D21_MARK),
+ PINMUX_GPIO(GPIO_FN_D20, D20_MARK),
+ PINMUX_GPIO(GPIO_FN_D19, D19_MARK),
+ PINMUX_GPIO(GPIO_FN_D18, D18_MARK),
+ PINMUX_GPIO(GPIO_FN_D17, D17_MARK),
+ PINMUX_GPIO(GPIO_FN_D16, D16_MARK),
+ PINMUX_GPIO(GPIO_FN_D15, D15_MARK),
+ PINMUX_GPIO(GPIO_FN_D14, D14_MARK),
+ PINMUX_GPIO(GPIO_FN_D13, D13_MARK),
+ PINMUX_GPIO(GPIO_FN_D12, D12_MARK),
+ PINMUX_GPIO(GPIO_FN_D11, D11_MARK),
+ PINMUX_GPIO(GPIO_FN_D10, D10_MARK),
+ PINMUX_GPIO(GPIO_FN_D9, D9_MARK),
+ PINMUX_GPIO(GPIO_FN_D8, D8_MARK),
+ PINMUX_GPIO(GPIO_FN_D7, D7_MARK),
+ PINMUX_GPIO(GPIO_FN_D6, D6_MARK),
+ PINMUX_GPIO(GPIO_FN_D5, D5_MARK),
+ PINMUX_GPIO(GPIO_FN_D4, D4_MARK),
+ PINMUX_GPIO(GPIO_FN_D3, D3_MARK),
+ PINMUX_GPIO(GPIO_FN_D2, D2_MARK),
+ PINMUX_GPIO(GPIO_FN_D1, D1_MARK),
+ PINMUX_GPIO(GPIO_FN_D0, D0_MARK),
+ PINMUX_GPIO(GPIO_FN_A25, A25_MARK),
+ PINMUX_GPIO(GPIO_FN_A24, A24_MARK),
+ PINMUX_GPIO(GPIO_FN_A23, A23_MARK),
+ PINMUX_GPIO(GPIO_FN_A22, A22_MARK),
+ PINMUX_GPIO(GPIO_FN_CS6B_CE1B, CS6B_CE1B_MARK),
+ PINMUX_GPIO(GPIO_FN_CS6A_CE2B, CS6A_CE2B_MARK),
+ PINMUX_GPIO(GPIO_FN_CS5B_CE1A, CS5B_CE1A_MARK),
+ PINMUX_GPIO(GPIO_FN_CS5A_CE2A, CS5A_CE2A_MARK),
+ PINMUX_GPIO(GPIO_FN_WE3_ICIOWR, WE3_ICIOWR_MARK),
+ PINMUX_GPIO(GPIO_FN_WE2_ICIORD, WE2_ICIORD_MARK),
+ PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+ PINMUX_GPIO(GPIO_FN_WAIT, WAIT_MARK),
+ PINMUX_GPIO(GPIO_FN_BS, BS_MARK),
+
+ /* KEYSC */
+ PINMUX_GPIO(GPIO_FN_KEYOUT5_IN5, KEYOUT5_IN5_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT4_IN6, KEYOUT4_IN6_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN4, KEYIN4_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN3, KEYIN3_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN2, KEYIN2_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN1, KEYIN1_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYIN0, KEYIN0_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT3, KEYOUT3_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT2, KEYOUT2_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT1, KEYOUT1_MARK),
+ PINMUX_GPIO(GPIO_FN_KEYOUT0, KEYOUT0_MARK),
+
+ /* ATAPI */
+ PINMUX_GPIO(GPIO_FN_IDED15, IDED15_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED14, IDED14_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED13, IDED13_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED12, IDED12_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED11, IDED11_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED10, IDED10_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED9, IDED9_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED8, IDED8_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED7, IDED7_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED6, IDED6_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED5, IDED5_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED4, IDED4_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED3, IDED3_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED2, IDED2_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED1, IDED1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDED0, IDED0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA2, IDEA2_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA1, IDEA1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEA0, IDEA0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIOWR, IDEIOWR_MARK),
+ PINMUX_GPIO(GPIO_FN_IODREQ, IODREQ_MARK),
+ PINMUX_GPIO(GPIO_FN_IDECS0, IDECS0_MARK),
+ PINMUX_GPIO(GPIO_FN_IDECS1, IDECS1_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIORD, IDEIORD_MARK),
+ PINMUX_GPIO(GPIO_FN_DIRECTION, DIRECTION_MARK),
+ PINMUX_GPIO(GPIO_FN_EXBUF_ENB, EXBUF_ENB_MARK),
+ PINMUX_GPIO(GPIO_FN_IDERST, IDERST_MARK),
+ PINMUX_GPIO(GPIO_FN_IODACK, IODACK_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEINT, IDEINT_MARK),
+ PINMUX_GPIO(GPIO_FN_IDEIORDY, IDEIORDY_MARK),
+
+ /* TPU */
+ PINMUX_GPIO(GPIO_FN_TPUTO3, TPUTO3_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO2, TPUTO2_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO1, TPUTO1_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTO0, TPUTO0_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTI3, TPUTI3_MARK),
+ PINMUX_GPIO(GPIO_FN_TPUTI2, TPUTI2_MARK),
+
+ /* LCDC */
+ PINMUX_GPIO(GPIO_FN_LCDD23, LCDD23_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD22, LCDD22_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD21, LCDD21_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD20, LCDD20_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD19, LCDD19_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD18, LCDD18_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD17, LCDD17_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD16, LCDD16_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD15, LCDD15_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD14, LCDD14_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD13, LCDD13_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD12, LCDD12_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD11, LCDD11_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD10, LCDD10_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD9, LCDD9_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD8, LCDD8_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD7, LCDD7_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD6, LCDD6_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD5, LCDD5_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD4, LCDD4_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD3, LCDD3_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD2, LCDD2_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD1, LCDD1_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDD0, LCDD0_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVSYN, LCDVSYN_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDISP, LCDDISP_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDRS, LCDRS_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDHSYN, LCDHSYN_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDCS, LCDCS_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDON, LCDDON_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDDCK, LCDDCK_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDWR, LCDWR_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVEPWC, LCDVEPWC_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDVCPWC, LCDVCPWC_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDRD, LCDRD_MARK),
+ PINMUX_GPIO(GPIO_FN_LCDLCLK, LCDLCLK_MARK),
+
+ /* SCIF0 */
+ PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+
+ /* SCIF1 */
+ PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+
+ /* SCIF2 */
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_TXD, SCIF2_L_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_SCK, SCIF2_L_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_L_RXD, SCIF2_L_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_TXD, SCIF2_V_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_SCK, SCIF2_V_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF2_V_RXD, SCIF2_V_RXD_MARK),
+
+ /* SCIF3 */
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_SCK, SCIF3_V_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_RXD, SCIF3_V_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_TXD, SCIF3_V_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_CTS, SCIF3_V_CTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_V_RTS, SCIF3_V_RTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_SCK, SCIF3_I_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_RXD, SCIF3_I_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_TXD, SCIF3_I_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_CTS, SCIF3_I_CTS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_I_RTS, SCIF3_I_RTS_MARK),
+
+ /* SCIF4 */
+ PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK),
+
+ /* SCIF5 */
+ PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK),
+
+ /* FSI */
+ PINMUX_GPIO(GPIO_FN_FSIMCKB, FSIMCKB_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIMCKA, FSIMCKA_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOASD, FSIOASD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIABCK, FSIIABCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIALRCK, FSIIALRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOABCK, FSIOABCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOALRCK, FSIOALRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_CLKAUDIOAO, CLKAUDIOAO_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBSD, FSIIBSD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBSD, FSIOBSD_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBBCK, FSIIBBCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIBLRCK, FSIIBLRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBBCK, FSIOBBCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIOBLRCK, FSIOBLRCK_MARK),
+ PINMUX_GPIO(GPIO_FN_CLKAUDIOBO, CLKAUDIOBO_MARK),
+ PINMUX_GPIO(GPIO_FN_FSIIASD, FSIIASD_MARK),
+
+ /* AUD */
+ PINMUX_GPIO(GPIO_FN_AUDCK, AUDCK_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDSYNC, AUDSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA3, AUDATA3_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA2, AUDATA2_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA1, AUDATA1_MARK),
+ PINMUX_GPIO(GPIO_FN_AUDATA0, AUDATA0_MARK),
+
+ /* VIO */
+ PINMUX_GPIO(GPIO_FN_VIO_CKO, VIO_CKO_MARK),
+
+ /* VIO0 */
+ PINMUX_GPIO(GPIO_FN_VIO0_D15, VIO0_D15_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D14, VIO0_D14_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D13, VIO0_D13_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D12, VIO0_D12_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D11, VIO0_D11_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D10, VIO0_D10_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D9, VIO0_D9_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D8, VIO0_D8_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D7, VIO0_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D6, VIO0_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D5, VIO0_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D4, VIO0_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D3, VIO0_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D2, VIO0_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D1, VIO0_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_D0, VIO0_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_VD, VIO0_VD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_CLK, VIO0_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_FLD, VIO0_FLD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO0_HD, VIO0_HD_MARK),
+
+ /* VIO1 */
+ PINMUX_GPIO(GPIO_FN_VIO1_D7, VIO1_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D6, VIO1_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D5, VIO1_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D4, VIO1_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D3, VIO1_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D2, VIO1_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D1, VIO1_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_D0, VIO1_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_FLD, VIO1_FLD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_HD, VIO1_HD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_VD, VIO1_VD_MARK),
+ PINMUX_GPIO(GPIO_FN_VIO1_CLK, VIO1_CLK_MARK),
+
+ /* Eth */
+ PINMUX_GPIO(GPIO_FN_RMII_RXD0, RMII_RXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_RXD1, RMII_RXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TXD0, RMII_TXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TXD1, RMII_TXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_REF_CLK, RMII_REF_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_TX_EN, RMII_TX_EN_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_RX_ER, RMII_RX_ER_MARK),
+ PINMUX_GPIO(GPIO_FN_RMII_CRS_DV, RMII_CRS_DV_MARK),
+ PINMUX_GPIO(GPIO_FN_LNKSTA, LNKSTA_MARK),
+ PINMUX_GPIO(GPIO_FN_MDIO, MDIO_MARK),
+ PINMUX_GPIO(GPIO_FN_MDC, MDC_MARK),
+
+ /* System */
+ PINMUX_GPIO(GPIO_FN_PDSTATUS, PDSTATUS_MARK),
+ PINMUX_GPIO(GPIO_FN_STATUS2, STATUS2_MARK),
+ PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK),
+
+ /* VOU */
+ PINMUX_GPIO(GPIO_FN_DV_D15, DV_D15_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D14, DV_D14_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D13, DV_D13_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D12, DV_D12_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D11, DV_D11_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D10, DV_D10_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D9, DV_D9_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D8, DV_D8_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D7, DV_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D6, DV_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D5, DV_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D4, DV_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D3, DV_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D2, DV_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D1, DV_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_D0, DV_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_CLKI, DV_CLKI_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_CLK, DV_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_VSYNC, DV_VSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_DV_HSYNC, DV_HSYNC_MARK),
+
+ /* MSIOF0 */
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RXD, MSIOF0_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TXD, MSIOF0_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_MCK, MSIOF0_MCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TSCK, MSIOF0_TSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_SS1, MSIOF0_SS1_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_SS2, MSIOF0_SS2_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_TSYNC, MSIOF0_TSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RSCK, MSIOF0_RSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF0_RSYNC, MSIOF0_RSYNC_MARK),
+
+ /* MSIOF1 */
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RXD, MSIOF1_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TXD, MSIOF1_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_MCK, MSIOF1_MCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TSCK, MSIOF1_TSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_SS1, MSIOF1_SS1_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_SS2, MSIOF1_SS2_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_TSYNC, MSIOF1_TSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RSCK, MSIOF1_RSCK_MARK),
+ PINMUX_GPIO(GPIO_FN_MSIOF1_RSYNC, MSIOF1_RSYNC_MARK),
+
+ /* DMAC */
+ PINMUX_GPIO(GPIO_FN_DMAC_DACK0, DMAC_DACK0_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DREQ0, DMAC_DREQ0_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DACK1, DMAC_DACK1_MARK),
+ PINMUX_GPIO(GPIO_FN_DMAC_DREQ1, DMAC_DREQ1_MARK),
+
+ /* SDHI0 */
+ PINMUX_GPIO(GPIO_FN_SDHI0CD, SDHI0CD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0WP, SDHI0WP_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0CMD, SDHI0CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0CLK, SDHI0CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D3, SDHI0D3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D2, SDHI0D2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D1, SDHI0D1_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI0D0, SDHI0D0_MARK),
+
+ /* SDHI1 */
+ PINMUX_GPIO(GPIO_FN_SDHI1CD, SDHI1CD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1WP, SDHI1WP_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1CMD, SDHI1CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1CLK, SDHI1CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D3, SDHI1D3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D2, SDHI1D2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D1, SDHI1D1_MARK),
+ PINMUX_GPIO(GPIO_FN_SDHI1D0, SDHI1D0_MARK),
+
+ /* MMC */
+ PINMUX_GPIO(GPIO_FN_MMC_D7, MMC_D7_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D6, MMC_D6_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D5, MMC_D5_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D4, MMC_D4_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D3, MMC_D3_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D2, MMC_D2_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D1, MMC_D1_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_D0, MMC_D0_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_CLK, MMC_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_MMC_CMD, MMC_CMD_MARK),
+
+ /* IrDA */
+ PINMUX_GPIO(GPIO_FN_IRDA_OUT, IRDA_OUT_MARK),
+ PINMUX_GPIO(GPIO_FN_IRDA_IN, IRDA_IN_MARK),
+
+ /* TSIF */
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDAT, TSIF_TS0_SDAT_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SCK, TSIF_TS0_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SDEN, TSIF_TS0_SDEN_MARK),
+ PINMUX_GPIO(GPIO_FN_TSIF_TS0_SPSYNC, TSIF_TS0_SPSYNC_MARK),
+
+ /* IRQ */
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ7, INTC_IRQ7_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ6, INTC_IRQ6_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ5, INTC_IRQ5_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ4, INTC_IRQ4_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ3, INTC_IRQ3_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ2, INTC_IRQ2_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ1, INTC_IRQ1_MARK),
+ PINMUX_GPIO(GPIO_FN_INTC_IRQ0, INTC_IRQ0_MARK),
+ };
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("PACR", 0xa4050100, 16, 2) {
+ PTA7_FN, PTA7_OUT, PTA7_IN_PU, PTA7_IN,
+ PTA6_FN, PTA6_OUT, PTA6_IN_PU, PTA6_IN,
+ PTA5_FN, PTA5_OUT, PTA5_IN_PU, PTA5_IN,
+ PTA4_FN, PTA4_OUT, PTA4_IN_PU, PTA4_IN,
+ PTA3_FN, PTA3_OUT, PTA3_IN_PU, PTA3_IN,
+ PTA2_FN, PTA2_OUT, PTA2_IN_PU, PTA2_IN,
+ PTA1_FN, PTA1_OUT, PTA1_IN_PU, PTA1_IN,
+ PTA0_FN, PTA0_OUT, PTA0_IN_PU, PTA0_IN }
+ },
+ { PINMUX_CFG_REG("PBCR", 0xa4050102, 16, 2) {
+ PTB7_FN, PTB7_OUT, PTB7_IN_PU, PTB7_IN,
+ PTB6_FN, PTB6_OUT, PTB6_IN_PU, PTB6_IN,
+ PTB5_FN, PTB5_OUT, PTB5_IN_PU, PTB5_IN,
+ PTB4_FN, PTB4_OUT, PTB4_IN_PU, PTB4_IN,
+ PTB3_FN, PTB3_OUT, PTB3_IN_PU, PTB3_IN,
+ PTB2_FN, PTB2_OUT, PTB2_IN_PU, PTB2_IN,
+ PTB1_FN, PTB1_OUT, PTB1_IN_PU, PTB1_IN,
+ PTB0_FN, PTB0_OUT, PTB0_IN_PU, PTB0_IN }
+ },
+ { PINMUX_CFG_REG("PCCR", 0xa4050104, 16, 2) {
+ PTC7_FN, PTC7_OUT, PTC7_IN_PU, PTC7_IN,
+ PTC6_FN, PTC6_OUT, PTC6_IN_PU, PTC6_IN,
+ PTC5_FN, PTC5_OUT, PTC5_IN_PU, PTC5_IN,
+ PTC4_FN, PTC4_OUT, PTC4_IN_PU, PTC4_IN,
+ PTC3_FN, PTC3_OUT, PTC3_IN_PU, PTC3_IN,
+ PTC2_FN, PTC2_OUT, PTC2_IN_PU, PTC2_IN,
+ PTC1_FN, PTC1_OUT, PTC1_IN_PU, PTC1_IN,
+ PTC0_FN, PTC0_OUT, PTC0_IN_PU, PTC0_IN }
+ },
+ { PINMUX_CFG_REG("PDCR", 0xa4050106, 16, 2) {
+ PTD7_FN, PTD7_OUT, PTD7_IN_PU, PTD7_IN,
+ PTD6_FN, PTD6_OUT, PTD6_IN_PU, PTD6_IN,
+ PTD5_FN, PTD5_OUT, PTD5_IN_PU, PTD5_IN,
+ PTD4_FN, PTD4_OUT, PTD4_IN_PU, PTD4_IN,
+ PTD3_FN, PTD3_OUT, PTD3_IN_PU, PTD3_IN,
+ PTD2_FN, PTD2_OUT, PTD2_IN_PU, PTD2_IN,
+ PTD1_FN, PTD1_OUT, PTD1_IN_PU, PTD1_IN,
+ PTD0_FN, PTD0_OUT, PTD0_IN_PU, PTD0_IN }
+ },
+ { PINMUX_CFG_REG("PECR", 0xa4050108, 16, 2) {
+ PTE7_FN, PTE7_OUT, PTE7_IN_PU, PTE7_IN,
+ PTE6_FN, PTE6_OUT, PTE6_IN_PU, PTE6_IN,
+ PTE5_FN, PTE5_OUT, PTE5_IN_PU, PTE5_IN,
+ PTE4_FN, PTE4_OUT, PTE4_IN_PU, PTE4_IN,
+ PTE3_FN, PTE3_OUT, PTE3_IN_PU, PTE3_IN,
+ PTE2_FN, PTE2_OUT, PTE2_IN_PU, PTE2_IN,
+ PTE1_FN, PTE1_OUT, PTE1_IN_PU, PTE1_IN,
+ PTE0_FN, PTE0_OUT, PTE0_IN_PU, PTE0_IN }
+ },
+ { PINMUX_CFG_REG("PFCR", 0xa405010a, 16, 2) {
+ PTF7_FN, PTF7_OUT, PTF7_IN_PU, PTF7_IN,
+ PTF6_FN, PTF6_OUT, PTF6_IN_PU, PTF6_IN,
+ PTF5_FN, PTF5_OUT, PTF5_IN_PU, PTF5_IN,
+ PTF4_FN, PTF4_OUT, PTF4_IN_PU, PTF4_IN,
+ PTF3_FN, PTF3_OUT, PTF3_IN_PU, PTF3_IN,
+ PTF2_FN, PTF2_OUT, PTF2_IN_PU, PTF2_IN,
+ PTF1_FN, PTF1_OUT, PTF1_IN_PU, PTF1_IN,
+ PTF0_FN, PTF0_OUT, PTF0_IN_PU, PTF0_IN }
+ },
+ { PINMUX_CFG_REG("PGCR", 0xa405010c, 16, 2) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PTG5_FN, PTG5_OUT, 0, 0,
+ PTG4_FN, PTG4_OUT, 0, 0,
+ PTG3_FN, PTG3_OUT, 0, 0,
+ PTG2_FN, PTG2_OUT, 0, 0,
+ PTG1_FN, PTG1_OUT, 0, 0,
+ PTG0_FN, PTG0_OUT, 0, 0 }
+ },
+ { PINMUX_CFG_REG("PHCR", 0xa405010e, 16, 2) {
+ PTH7_FN, PTH7_OUT, PTH7_IN_PU, PTH7_IN,
+ PTH6_FN, PTH6_OUT, PTH6_IN_PU, PTH6_IN,
+ PTH5_FN, PTH5_OUT, PTH5_IN_PU, PTH5_IN,
+ PTH4_FN, PTH4_OUT, PTH4_IN_PU, PTH4_IN,
+ PTH3_FN, PTH3_OUT, PTH3_IN_PU, PTH3_IN,
+ PTH2_FN, PTH2_OUT, PTH2_IN_PU, PTH2_IN,
+ PTH1_FN, PTH1_OUT, PTH1_IN_PU, PTH1_IN,
+ PTH0_FN, PTH0_OUT, PTH0_IN_PU, PTH0_IN }
+ },
+ { PINMUX_CFG_REG("PJCR", 0xa4050110, 16, 2) {
+ PTJ7_FN, PTJ7_OUT, 0, 0,
+ PTJ6_FN, PTJ6_OUT, 0, 0,
+ PTJ5_FN, PTJ5_OUT, 0, 0,
+ 0, 0, 0, 0,
+ PTJ3_FN, PTJ3_OUT, PTJ3_IN_PU, PTJ3_IN,
+ PTJ2_FN, PTJ2_OUT, PTJ2_IN_PU, PTJ2_IN,
+ PTJ1_FN, PTJ1_OUT, PTJ1_IN_PU, PTJ1_IN,
+ PTJ0_FN, PTJ0_OUT, PTJ0_IN_PU, PTJ0_IN }
+ },
+ { PINMUX_CFG_REG("PKCR", 0xa4050112, 16, 2) {
+ PTK7_FN, PTK7_OUT, PTK7_IN_PU, PTK7_IN,
+ PTK6_FN, PTK6_OUT, PTK6_IN_PU, PTK6_IN,
+ PTK5_FN, PTK5_OUT, PTK5_IN_PU, PTK5_IN,
+ PTK4_FN, PTK4_OUT, PTK4_IN_PU, PTK4_IN,
+ PTK3_FN, PTK3_OUT, PTK3_IN_PU, PTK3_IN,
+ PTK2_FN, PTK2_OUT, PTK2_IN_PU, PTK2_IN,
+ PTK1_FN, PTK1_OUT, PTK1_IN_PU, PTK1_IN,
+ PTK0_FN, PTK0_OUT, PTK0_IN_PU, PTK0_IN }
+ },
+ { PINMUX_CFG_REG("PLCR", 0xa4050114, 16, 2) {
+ PTL7_FN, PTL7_OUT, PTL7_IN_PU, PTL7_IN,
+ PTL6_FN, PTL6_OUT, PTL6_IN_PU, PTL6_IN,
+ PTL5_FN, PTL5_OUT, PTL5_IN_PU, PTL5_IN,
+ PTL4_FN, PTL4_OUT, PTL4_IN_PU, PTL4_IN,
+ PTL3_FN, PTL3_OUT, PTL3_IN_PU, PTL3_IN,
+ PTL2_FN, PTL2_OUT, PTL2_IN_PU, PTL2_IN,
+ PTL1_FN, PTL1_OUT, PTL1_IN_PU, PTL1_IN,
+ PTL0_FN, PTL0_OUT, PTL0_IN_PU, PTL0_IN }
+ },
+ { PINMUX_CFG_REG("PMCR", 0xa4050116, 16, 2) {
+ PTM7_FN, PTM7_OUT, PTM7_IN_PU, PTM7_IN,
+ PTM6_FN, PTM6_OUT, PTM6_IN_PU, PTM6_IN,
+ PTM5_FN, PTM5_OUT, PTM5_IN_PU, PTM5_IN,
+ PTM4_FN, PTM4_OUT, PTM4_IN_PU, PTM4_IN,
+ PTM3_FN, PTM3_OUT, PTM3_IN_PU, PTM3_IN,
+ PTM2_FN, PTM2_OUT, PTM2_IN_PU, PTM2_IN,
+ PTM1_FN, PTM1_OUT, PTM1_IN_PU, PTM1_IN,
+ PTM0_FN, PTM0_OUT, PTM0_IN_PU, PTM0_IN }
+ },
+ { PINMUX_CFG_REG("PNCR", 0xa4050118, 16, 2) {
+ PTN7_FN, PTN7_OUT, PTN7_IN_PU, PTN7_IN,
+ PTN6_FN, PTN6_OUT, PTN6_IN_PU, PTN6_IN,
+ PTN5_FN, PTN5_OUT, PTN5_IN_PU, PTN5_IN,
+ PTN4_FN, PTN4_OUT, PTN4_IN_PU, PTN4_IN,
+ PTN3_FN, PTN3_OUT, PTN3_IN_PU, PTN3_IN,
+ PTN2_FN, PTN2_OUT, PTN2_IN_PU, PTN2_IN,
+ PTN1_FN, PTN1_OUT, PTN1_IN_PU, PTN1_IN,
+ PTN0_FN, PTN0_OUT, PTN0_IN_PU, PTN0_IN }
+ },
+ { PINMUX_CFG_REG("PQCR", 0xa405011a, 16, 2) {
+ PTQ7_FN, PTQ7_OUT, PTQ7_IN_PU, PTQ7_IN,
+ PTQ6_FN, PTQ6_OUT, PTQ6_IN_PU, PTQ6_IN,
+ PTQ5_FN, PTQ5_OUT, PTQ5_IN_PU, PTQ5_IN,
+ PTQ4_FN, PTQ4_OUT, PTQ4_IN_PU, PTQ4_IN,
+ PTQ3_FN, PTQ3_OUT, PTQ3_IN_PU, PTQ3_IN,
+ PTQ2_FN, PTQ2_OUT, PTQ2_IN_PU, PTQ2_IN,
+ PTQ1_FN, PTQ1_OUT, PTQ1_IN_PU, PTQ1_IN,
+ PTQ0_FN, PTQ0_OUT, PTQ0_IN_PU, PTQ0_IN }
+ },
+ { PINMUX_CFG_REG("PRCR", 0xa405011c, 16, 2) {
+ PTR7_FN, PTR7_OUT, PTR7_IN_PU, PTR7_IN,
+ PTR6_FN, PTR6_OUT, PTR6_IN_PU, PTR6_IN,
+ PTR5_FN, PTR5_OUT, PTR5_IN_PU, PTR5_IN,
+ PTR4_FN, PTR4_OUT, PTR4_IN_PU, PTR4_IN,
+ PTR3_FN, 0, PTR3_IN_PU, PTR3_IN,
+ PTR2_FN, 0, PTR2_IN_PU, PTR2_IN,
+ PTR1_FN, PTR1_OUT, PTR1_IN_PU, PTR1_IN,
+ PTR0_FN, PTR0_OUT, PTR0_IN_PU, PTR0_IN }
+ },
+ { PINMUX_CFG_REG("PSCR", 0xa405011e, 16, 2) {
+ 0, 0, 0, 0,
+ PTS6_FN, PTS6_OUT, PTS6_IN_PU, PTS6_IN,
+ PTS5_FN, PTS5_OUT, PTS5_IN_PU, PTS5_IN,
+ PTS4_FN, PTS4_OUT, PTS4_IN_PU, PTS4_IN,
+ PTS3_FN, PTS3_OUT, PTS3_IN_PU, PTS3_IN,
+ PTS2_FN, PTS2_OUT, PTS2_IN_PU, PTS2_IN,
+ PTS1_FN, PTS1_OUT, PTS1_IN_PU, PTS1_IN,
+ PTS0_FN, PTS0_OUT, PTS0_IN_PU, PTS0_IN }
+ },
+ { PINMUX_CFG_REG("PTCR", 0xa4050140, 16, 2) {
+ PTT7_FN, PTT7_OUT, PTT7_IN_PU, PTT7_IN,
+ PTT6_FN, PTT6_OUT, PTT6_IN_PU, PTT6_IN,
+ PTT5_FN, PTT5_OUT, PTT5_IN_PU, PTT5_IN,
+ PTT4_FN, PTT4_OUT, PTT4_IN_PU, PTT4_IN,
+ PTT3_FN, PTT3_OUT, PTT3_IN_PU, PTT3_IN,
+ PTT2_FN, PTT2_OUT, PTT2_IN_PU, PTT2_IN,
+ PTT1_FN, PTT1_OUT, PTT1_IN_PU, PTT1_IN,
+ PTT0_FN, PTT0_OUT, PTT0_IN_PU, PTT0_IN }
+ },
+ { PINMUX_CFG_REG("PUCR", 0xa4050142, 16, 2) {
+ PTU7_FN, PTU7_OUT, PTU7_IN_PU, PTU7_IN,
+ PTU6_FN, PTU6_OUT, PTU6_IN_PU, PTU6_IN,
+ PTU5_FN, PTU5_OUT, PTU5_IN_PU, PTU5_IN,
+ PTU4_FN, PTU4_OUT, PTU4_IN_PU, PTU4_IN,
+ PTU3_FN, PTU3_OUT, PTU3_IN_PU, PTU3_IN,
+ PTU2_FN, PTU2_OUT, PTU2_IN_PU, PTU2_IN,
+ PTU1_FN, PTU1_OUT, PTU1_IN_PU, PTU1_IN,
+ PTU0_FN, PTU0_OUT, PTU0_IN_PU, PTU0_IN }
+ },
+ { PINMUX_CFG_REG("PVCR", 0xa4050144, 16, 2) {
+ PTV7_FN, PTV7_OUT, PTV7_IN_PU, PTV7_IN,
+ PTV6_FN, PTV6_OUT, PTV6_IN_PU, PTV6_IN,
+ PTV5_FN, PTV5_OUT, PTV5_IN_PU, PTV5_IN,
+ PTV4_FN, PTV4_OUT, PTV4_IN_PU, PTV4_IN,
+ PTV3_FN, PTV3_OUT, PTV3_IN_PU, PTV3_IN,
+ PTV2_FN, PTV2_OUT, PTV2_IN_PU, PTV2_IN,
+ PTV1_FN, PTV1_OUT, PTV1_IN_PU, PTV1_IN,
+ PTV0_FN, PTV0_OUT, PTV0_IN_PU, PTV0_IN }
+ },
+ { PINMUX_CFG_REG("PWCR", 0xa4050146, 16, 2) {
+ PTW7_FN, PTW7_OUT, PTW7_IN_PU, PTW7_IN,
+ PTW6_FN, PTW6_OUT, PTW6_IN_PU, PTW6_IN,
+ PTW5_FN, PTW5_OUT, PTW5_IN_PU, PTW5_IN,
+ PTW4_FN, PTW4_OUT, PTW4_IN_PU, PTW4_IN,
+ PTW3_FN, PTW3_OUT, PTW3_IN_PU, PTW3_IN,
+ PTW2_FN, PTW2_OUT, PTW2_IN_PU, PTW2_IN,
+ PTW1_FN, PTW1_OUT, PTW1_IN_PU, PTW1_IN,
+ PTW0_FN, PTW0_OUT, PTW0_IN_PU, PTW0_IN }
+ },
+ { PINMUX_CFG_REG("PXCR", 0xa4050148, 16, 2) {
+ PTX7_FN, PTX7_OUT, PTX7_IN_PU, PTX7_IN,
+ PTX6_FN, PTX6_OUT, PTX6_IN_PU, PTX6_IN,
+ PTX5_FN, PTX5_OUT, PTX5_IN_PU, PTX5_IN,
+ PTX4_FN, PTX4_OUT, PTX4_IN_PU, PTX4_IN,
+ PTX3_FN, PTX3_OUT, PTX3_IN_PU, PTX3_IN,
+ PTX2_FN, PTX2_OUT, PTX2_IN_PU, PTX2_IN,
+ PTX1_FN, PTX1_OUT, PTX1_IN_PU, PTX1_IN,
+ PTX0_FN, PTX0_OUT, PTX0_IN_PU, PTX0_IN }
+ },
+ { PINMUX_CFG_REG("PYCR", 0xa405014a, 16, 2) {
+ PTY7_FN, PTY7_OUT, PTY7_IN_PU, PTY7_IN,
+ PTY6_FN, PTY6_OUT, PTY6_IN_PU, PTY6_IN,
+ PTY5_FN, PTY5_OUT, PTY5_IN_PU, PTY5_IN,
+ PTY4_FN, PTY4_OUT, PTY4_IN_PU, PTY4_IN,
+ PTY3_FN, PTY3_OUT, PTY3_IN_PU, PTY3_IN,
+ PTY2_FN, PTY2_OUT, PTY2_IN_PU, PTY2_IN,
+ PTY1_FN, PTY1_OUT, PTY1_IN_PU, PTY1_IN,
+ PTY0_FN, PTY0_OUT, PTY0_IN_PU, PTY0_IN }
+ },
+ { PINMUX_CFG_REG("PZCR", 0xa405014c, 16, 2) {
+ PTZ7_FN, PTZ7_OUT, PTZ7_IN_PU, PTZ7_IN,
+ PTZ6_FN, PTZ6_OUT, PTZ6_IN_PU, PTZ6_IN,
+ PTZ5_FN, PTZ5_OUT, PTZ5_IN_PU, PTZ5_IN,
+ PTZ4_FN, PTZ4_OUT, PTZ4_IN_PU, PTZ4_IN,
+ PTZ3_FN, PTZ3_OUT, PTZ3_IN_PU, PTZ3_IN,
+ PTZ2_FN, PTZ2_OUT, PTZ2_IN_PU, PTZ2_IN,
+ PTZ1_FN, PTZ1_OUT, PTZ1_IN_PU, PTZ1_IN,
+ PTZ0_FN, PTZ0_OUT, PTZ0_IN_PU, PTZ0_IN }
+ },
+ { PINMUX_CFG_REG("PSELA", 0xa405014e, 16, 1) {
+ PSA15_0, PSA15_1,
+ PSA14_0, PSA14_1,
+ PSA13_0, PSA13_1,
+ PSA12_0, PSA12_1,
+ 0, 0,
+ PSA10_0, PSA10_1,
+ PSA9_0, PSA9_1,
+ PSA8_0, PSA8_1,
+ PSA7_0, PSA7_1,
+ PSA6_0, PSA6_1,
+ PSA5_0, PSA5_1,
+ 0, 0,
+ PSA3_0, PSA3_1,
+ PSA2_0, PSA2_1,
+ PSA1_0, PSA1_1,
+ PSA0_0, PSA0_1}
+ },
+ { PINMUX_CFG_REG("PSELB", 0xa4050150, 16, 1) {
+ 0, 0,
+ PSB14_0, PSB14_1,
+ PSB13_0, PSB13_1,
+ PSB12_0, PSB12_1,
+ PSB11_0, PSB11_1,
+ PSB10_0, PSB10_1,
+ PSB9_0, PSB9_1,
+ PSB8_0, PSB8_1,
+ PSB7_0, PSB7_1,
+ PSB6_0, PSB6_1,
+ PSB5_0, PSB5_1,
+ PSB4_0, PSB4_1,
+ PSB3_0, PSB3_1,
+ PSB2_0, PSB2_1,
+ PSB1_0, PSB1_1,
+ PSB0_0, PSB0_1}
+ },
+ { PINMUX_CFG_REG("PSELC", 0xa4050152, 16, 1) {
+ PSC15_0, PSC15_1,
+ PSC14_0, PSC14_1,
+ PSC13_0, PSC13_1,
+ PSC12_0, PSC12_1,
+ PSC11_0, PSC11_1,
+ PSC10_0, PSC10_1,
+ PSC9_0, PSC9_1,
+ PSC8_0, PSC8_1,
+ PSC7_0, PSC7_1,
+ PSC6_0, PSC6_1,
+ PSC5_0, PSC5_1,
+ PSC4_0, PSC4_1,
+ 0, 0,
+ PSC2_0, PSC2_1,
+ PSC1_0, PSC1_1,
+ PSC0_0, PSC0_1}
+ },
+ { PINMUX_CFG_REG("PSELD", 0xa4050154, 16, 1) {
+ PSD15_0, PSD15_1,
+ PSD14_0, PSD14_1,
+ PSD13_0, PSD13_1,
+ PSD12_0, PSD12_1,
+ PSD11_0, PSD11_1,
+ PSD10_0, PSD10_1,
+ PSD9_0, PSD9_1,
+ PSD8_0, PSD8_1,
+ PSD7_0, PSD7_1,
+ PSD6_0, PSD6_1,
+ PSD5_0, PSD5_1,
+ PSD4_0, PSD4_1,
+ PSD3_0, PSD3_1,
+ PSD2_0, PSD2_1,
+ PSD1_0, PSD1_1,
+ PSD0_0, PSD0_1}
+ },
+ { PINMUX_CFG_REG("PSELE", 0xa4050156, 16, 1) {
+ PSE15_0, PSE15_1,
+ PSE14_0, PSE14_1,
+ PSE13_0, PSE13_1,
+ PSE12_0, PSE12_1,
+ PSE11_0, PSE11_1,
+ PSE10_0, PSE10_1,
+ PSE9_0, PSE9_1,
+ PSE8_0, PSE8_1,
+ PSE7_0, PSE7_1,
+ PSE6_0, PSE6_1,
+ PSE5_0, PSE5_1,
+ PSE4_0, PSE4_1,
+ PSE3_0, PSE3_1,
+ PSE2_0, PSE2_1,
+ PSE1_0, PSE1_1,
+ PSE0_0, PSE0_1}
+ },
+ {}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PADR", 0xa4050120, 8) {
+ PTA7_DATA, PTA6_DATA, PTA5_DATA, PTA4_DATA,
+ PTA3_DATA, PTA2_DATA, PTA1_DATA, PTA0_DATA }
+ },
+ { PINMUX_DATA_REG("PBDR", 0xa4050122, 8) {
+ PTB7_DATA, PTB6_DATA, PTB5_DATA, PTB4_DATA,
+ PTB3_DATA, PTB2_DATA, PTB1_DATA, PTB0_DATA }
+ },
+ { PINMUX_DATA_REG("PCDR", 0xa4050124, 8) {
+ PTC7_DATA, PTC6_DATA, PTC5_DATA, PTC4_DATA,
+ PTC3_DATA, PTC2_DATA, PTC1_DATA, PTC0_DATA }
+ },
+ { PINMUX_DATA_REG("PDDR", 0xa4050126, 8) {
+ PTD7_DATA, PTD6_DATA, PTD5_DATA, PTD4_DATA,
+ PTD3_DATA, PTD2_DATA, PTD1_DATA, PTD0_DATA }
+ },
+ { PINMUX_DATA_REG("PEDR", 0xa4050128, 8) {
+ PTE7_DATA, PTE6_DATA, PTE5_DATA, PTE4_DATA,
+ PTE3_DATA, PTE2_DATA, PTE1_DATA, PTE0_DATA }
+ },
+ { PINMUX_DATA_REG("PFDR", 0xa405012a, 8) {
+ PTF7_DATA, PTF6_DATA, PTF5_DATA, PTF4_DATA,
+ PTF3_DATA, PTF2_DATA, PTF1_DATA, PTF0_DATA }
+ },
+ { PINMUX_DATA_REG("PGDR", 0xa405012c, 8) {
+ 0, 0, PTG5_DATA, PTG4_DATA,
+ PTG3_DATA, PTG2_DATA, PTG1_DATA, PTG0_DATA }
+ },
+ { PINMUX_DATA_REG("PHDR", 0xa405012e, 8) {
+ PTH7_DATA, PTH6_DATA, PTH5_DATA, PTH4_DATA,
+ PTH3_DATA, PTH2_DATA, PTH1_DATA, PTH0_DATA }
+ },
+ { PINMUX_DATA_REG("PJDR", 0xa4050130, 8) {
+ PTJ7_DATA, PTJ6_DATA, PTJ5_DATA, 0,
+ PTJ3_DATA, PTJ2_DATA, PTJ1_DATA, PTJ0_DATA }
+ },
+ { PINMUX_DATA_REG("PKDR", 0xa4050132, 8) {
+ PTK7_DATA, PTK6_DATA, PTK5_DATA, PTK4_DATA,
+ PTK3_DATA, PTK2_DATA, PTK1_DATA, PTK0_DATA }
+ },
+ { PINMUX_DATA_REG("PLDR", 0xa4050134, 8) {
+ PTL7_DATA, PTL6_DATA, PTL5_DATA, PTL4_DATA,
+ PTL3_DATA, PTL2_DATA, PTL1_DATA, PTL0_DATA }
+ },
+ { PINMUX_DATA_REG("PMDR", 0xa4050136, 8) {
+ PTM7_DATA, PTM6_DATA, PTM5_DATA, PTM4_DATA,
+ PTM3_DATA, PTM2_DATA, PTM1_DATA, PTM0_DATA }
+ },
+ { PINMUX_DATA_REG("PNDR", 0xa4050138, 8) {
+ PTN7_DATA, PTN6_DATA, PTN5_DATA, PTN4_DATA,
+ PTN3_DATA, PTN2_DATA, PTN1_DATA, PTN0_DATA }
+ },
+ { PINMUX_DATA_REG("PQDR", 0xa405013a, 8) {
+ PTQ7_DATA, PTQ6_DATA, PTQ5_DATA, PTQ4_DATA,
+ PTQ3_DATA, PTQ2_DATA, PTQ1_DATA, PTQ0_DATA }
+ },
+ { PINMUX_DATA_REG("PRDR", 0xa405013c, 8) {
+ PTR7_DATA, PTR6_DATA, PTR5_DATA, PTR4_DATA,
+ PTR3_DATA, PTR2_DATA, PTR1_DATA, PTR0_DATA }
+ },
+ { PINMUX_DATA_REG("PSDR", 0xa405013e, 8) {
+ 0, PTS6_DATA, PTS5_DATA, PTS4_DATA,
+ PTS3_DATA, PTS2_DATA, PTS1_DATA, PTS0_DATA }
+ },
+ { PINMUX_DATA_REG("PTDR", 0xa4050160, 8) {
+ PTT7_DATA, PTT6_DATA, PTT5_DATA, PTT4_DATA,
+ PTT3_DATA, PTT2_DATA, PTT1_DATA, PTT0_DATA }
+ },
+ { PINMUX_DATA_REG("PUDR", 0xa4050162, 8) {
+ PTU7_DATA, PTU6_DATA, PTU5_DATA, PTU4_DATA,
+ PTU3_DATA, PTU2_DATA, PTU1_DATA, PTU0_DATA }
+ },
+ { PINMUX_DATA_REG("PVDR", 0xa4050164, 8) {
+ PTV7_DATA, PTV6_DATA, PTV5_DATA, PTV4_DATA,
+ PTV3_DATA, PTV2_DATA, PTV1_DATA, PTV0_DATA }
+ },
+ { PINMUX_DATA_REG("PWDR", 0xa4050166, 8) {
+ PTW7_DATA, PTW6_DATA, PTW5_DATA, PTW4_DATA,
+ PTW3_DATA, PTW2_DATA, PTW1_DATA, PTW0_DATA }
+ },
+ { PINMUX_DATA_REG("PXDR", 0xa4050168, 8) {
+ PTX7_DATA, PTX6_DATA, PTX5_DATA, PTX4_DATA,
+ PTX3_DATA, PTX2_DATA, PTX1_DATA, PTX0_DATA }
+ },
+ { PINMUX_DATA_REG("PYDR", 0xa405016a, 8) {
+ PTY7_DATA, PTY6_DATA, PTY5_DATA, PTY4_DATA,
+ PTY3_DATA, PTY2_DATA, PTY1_DATA, PTY0_DATA }
+ },
+ { PINMUX_DATA_REG("PZDR", 0xa405016c, 8) {
+ PTZ7_DATA, PTZ6_DATA, PTZ5_DATA, PTZ4_DATA,
+ PTZ3_DATA, PTZ2_DATA, PTZ1_DATA, PTZ0_DATA }
+ },
+ { },
+};
+
+static struct pinmux_info sh7724_pinmux_info = {
+ .name = "sh7724_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PTA7,
+ .last_gpio = GPIO_FN_INTC_IRQ0,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+ return register_pinmux(&sh7724_pinmux_info);
+}
+arch_initcall(plat_pinmux_setup);
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
#include <asm/clock.h>
static struct resource iic0_resources[] = {
.num_resources = ARRAY_SIZE(jpu_resources),
};
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
.name = "CMT",
.channel_offset = 0x60,
.timer_bit = 5,
.num_resources = ARRAY_SIZE(cmt_resources),
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
+ .clk = "scif0",
}, {
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 81, 81, 81, 81 },
+ .clk = "scif1",
}, {
.mapbase = 0xffe20000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 82, 82, 82, 82 },
+ .clk = "scif2",
}, {
.mapbase = 0xffe30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 83, 83, 83, 83 },
+ .clk = "scif3",
}, {
.flags = 0,
}
static struct platform_device *sh7343_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&iic0_device,
&iic1_device,
&sci_device,
static int __init sh7343_devices_setup(void)
{
- clk_always_enable("uram0"); /* URAM */
- clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("veu0"); /* VEU */
- clk_always_enable("vpu0"); /* VPU */
- clk_always_enable("jpu0"); /* JPU */
-
platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
}
__initcall(sh7343_devices_setup);
+static struct platform_device *sh7343_early_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7343_early_devices,
+ ARRAY_SIZE(sh7343_early_devices));
+}
+
enum {
UNUSED = 0,
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
#include <asm/clock.h>
static struct resource iic_resources[] = {
.num_resources = ARRAY_SIZE(veu1_resources),
};
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
.name = "CMT",
.channel_offset = 0x60,
.timer_bit = 5,
.num_resources = ARRAY_SIZE(cmt_resources),
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
+ .clk = "scif0",
}, {
.flags = 0,
}
static struct platform_device *sh7366_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&iic_device,
&sci_device,
&usb_host_device,
static int __init sh7366_devices_setup(void)
{
- clk_always_enable("rsmem0"); /* RSMEM */
- clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("veu1"); /* VEU-2 */
- clk_always_enable("veu0"); /* VEU-1 */
- clk_always_enable("vpu0"); /* VPU */
-
platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
}
__initcall(sh7366_devices_setup);
+static struct platform_device *sh7366_early_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7366_early_devices,
+ ARRAY_SIZE(sh7366_early_devices));
+}
+
enum {
UNUSED=0,
#include <linux/serial_sci.h>
#include <linux/mm.h>
#include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
.num_resources = ARRAY_SIZE(jpu_resources),
};
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
.name = "CMT",
.channel_offset = 0x60,
.timer_bit = 5,
.clk = "cmt0",
.clockevent_rating = 125,
- .clocksource_rating = 200,
+ .clocksource_rating = 125,
};
static struct resource cmt_resources[] = {
.num_resources = ARRAY_SIZE(cmt_resources),
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
+ .clk = "scif0",
},
{
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 81, 81, 81, 81 },
+ .clk = "scif1",
},
{
.mapbase = 0xffe20000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 82, 82, 82, 82 },
+ .clk = "scif2",
},
{
.flags = 0,
static struct platform_device *sh7722_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
&rtc_device,
&usbf_device,
&iic_device,
static int __init sh7722_devices_setup(void)
{
- clk_always_enable("uram0"); /* URAM */
- clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("veu0"); /* VEU */
- clk_always_enable("vpu0"); /* VPU */
- clk_always_enable("jpu0"); /* JPU */
-
platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
}
__initcall(sh7722_devices_setup);
+static struct platform_device *sh7722_early_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7722_early_devices,
+ ARRAY_SIZE(sh7722_early_devices));
+}
+
enum {
UNUSED=0,
#include <linux/mm.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
.num_resources = ARRAY_SIZE(veu1_resources),
};
-static struct sh_cmt_config cmt_platform_data = {
+static struct sh_timer_config cmt_platform_data = {
.name = "CMT",
.channel_offset = 0x60,
.timer_bit = 5,
.clk = "cmt0",
.clockevent_rating = 125,
- .clocksource_rating = 200,
+ .clocksource_rating = 125,
};
static struct resource cmt_resources[] = {
.num_resources = ARRAY_SIZE(cmt_resources),
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu1",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffd90008,
+ .end = 0xffd90013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu1",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffd90014,
+ .end = 0xffd9001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 58,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu1",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffd90020,
+ .end = 0xffd9002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 80, 80, 80, 80 },
+ .clk = "scif0",
},{
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 81, 81, 81, 81 },
+ .clk = "scif1",
},{
.mapbase = 0xffe20000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 82, 82, 82, 82 },
+ .clk = "scif2",
},{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIFA,
.irqs = { 56, 56, 56, 56 },
+ .clk = "scif3",
},{
.mapbase = 0xa4e40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIFA,
.irqs = { 88, 88, 88, 88 },
+ .clk = "scif4",
},{
.mapbase = 0xa4e50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIFA,
.irqs = { 109, 109, 109, 109 },
+ .clk = "scif5",
}, {
.flags = 0,
}
static struct platform_device *sh7723_devices[] __initdata = {
&cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
&sci_device,
&rtc_device,
&iic_device,
static int __init sh7723_devices_setup(void)
{
- clk_always_enable("meram0"); /* MERAM */
- clk_always_enable("veu1"); /* VEU2H1 */
- clk_always_enable("veu0"); /* VEU2H0 */
- clk_always_enable("vpu0"); /* VPU */
-
platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
}
__initcall(sh7723_devices_setup);
+static struct platform_device *sh7723_early_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7723_early_devices,
+ ARRAY_SIZE(sh7723_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC 0x0002
+#define RAMCR_CACHE_L2E 0x0001
+#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+void __uses_jump_to_uncached l2_cache_init(void)
+{
+ /* Enable L2 cache */
+ ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+}
+
enum {
UNUSED=0,
--- /dev/null
+/*
+ * SH7724 Setup
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7723 Setup
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
+#include <asm/clock.h>
+#include <asm/mmzone.h>
+
+/* Serial */
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ .clk = "scif0",
+ }, {
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ .clk = "scif1",
+ }, {
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ .clk = "scif2",
+ }, {
+ .mapbase = 0xa4e30000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 56, 56, 56, 56 },
+ .clk = "scif3",
+ }, {
+ .mapbase = 0xa4e40000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 88, 88, 88, 88 },
+ .clk = "scif4",
+ }, {
+ .mapbase = 0xa4e50000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIFA,
+ .irqs = { 109, 109, 109, 109 },
+ .clk = "scif5",
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+/* RTC */
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xa465fec0,
+ .end = 0xa465fec0 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = 69,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = 70,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = 68,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+/* I2C0 */
+static struct resource iic0_resources[] = {
+ [0] = {
+ .name = "IIC0",
+ .start = 0x04470000,
+ .end = 0x04470018 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 96,
+ .end = 99,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic0_device = {
+ .name = "i2c-sh_mobile",
+ .id = 0, /* "i2c0" clock */
+ .num_resources = ARRAY_SIZE(iic0_resources),
+ .resource = iic0_resources,
+};
+
+/* I2C1 */
+static struct resource iic1_resources[] = {
+ [0] = {
+ .name = "IIC1",
+ .start = 0x04750000,
+ .end = 0x04750018 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 92,
+ .end = 95,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device iic1_device = {
+ .name = "i2c-sh_mobile",
+ .id = 1, /* "i2c1" clock */
+ .num_resources = ARRAY_SIZE(iic1_resources),
+ .resource = iic1_resources,
+};
+
+/* VPU */
+static struct uio_info vpu_platform_data = {
+ .name = "VPU5F",
+ .version = "0",
+ .irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+ [0] = {
+ .name = "VPU",
+ .start = 0xfe900000,
+ .end = 0xfe902807,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device vpu_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 0,
+ .dev = {
+ .platform_data = &vpu_platform_data,
+ },
+ .resource = vpu_resources,
+ .num_resources = ARRAY_SIZE(vpu_resources),
+};
+
+/* VEU0 */
+static struct uio_info veu0_platform_data = {
+ .name = "VEU3F0",
+ .version = "0",
+ .irq = 83,
+};
+
+static struct resource veu0_resources[] = {
+ [0] = {
+ .name = "VEU3F0",
+ .start = 0xfe920000,
+ .end = 0xfe9200cb - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device veu0_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 1,
+ .dev = {
+ .platform_data = &veu0_platform_data,
+ },
+ .resource = veu0_resources,
+ .num_resources = ARRAY_SIZE(veu0_resources),
+};
+
+/* VEU1 */
+static struct uio_info veu1_platform_data = {
+ .name = "VEU3F1",
+ .version = "0",
+ .irq = 54,
+};
+
+static struct resource veu1_resources[] = {
+ [0] = {
+ .name = "VEU3F1",
+ .start = 0xfe924000,
+ .end = 0xfe9240cb - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device veu1_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 2,
+ .dev = {
+ .platform_data = &veu1_platform_data,
+ },
+ .resource = veu1_resources,
+ .num_resources = ARRAY_SIZE(veu1_resources),
+};
+
+static struct sh_timer_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu0",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu0",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu1",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffd90008,
+ .end = 0xffd90013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu1",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffd90014,
+ .end = 0xffd9001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 58,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu1",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffd90020,
+ .end = 0xffd9002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 57,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
+static struct platform_device *sh7724_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+ &sci_device,
+ &rtc_device,
+ &iic0_device,
+ &iic1_device,
+ &vpu_device,
+ &veu0_device,
+ &veu1_device,
+};
+
+static int __init sh7724_devices_setup(void)
+{
+ platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+ platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+ platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
+ return platform_add_devices(sh7724_devices,
+ ARRAY_SIZE(sh7724_devices));
+}
+device_initcall(sh7724_devices_setup);
+
+static struct platform_device *sh7724_early_devices[] __initdata = {
+ &cmt_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7724_early_devices,
+ ARRAY_SIZE(sh7724_early_devices));
+}
+
+#define RAMCR_CACHE_L2FC 0x0002
+#define RAMCR_CACHE_L2E 0x0001
+#define L2_CACHE_ENABLE (RAMCR_CACHE_L2E|RAMCR_CACHE_L2FC)
+void __uses_jump_to_uncached l2_cache_init(void)
+{
+ /* Enable L2 cache */
+ ctrl_outl(L2_CACHE_ENABLE, RAMCR);
+}
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ HUDI,
+ DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3,
+ _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK,
+ DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3,
+ VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI,
+ SCIFA_SCIFA0,
+ VPU_VPUI,
+ TPU_TPUI,
+ CEU21I,
+ BEU21I,
+ USB_USI0,
+ ATAPI,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR,
+ DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR,
+ KEYSC_KEYI,
+ SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,
+ VEU3F0I,
+ MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+ SPU_SPUI0, SPU_SPUI1,
+ SCIFA_SCIFA1,
+/* ICB_ICBI, */
+ ETHI,
+ I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+ I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+ SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2,
+ CMT_CMTI,
+ TSIF_TSIFI,
+/* ICB_LMBI, */
+ FSI_FSI,
+ SCIFA_SCIFA2,
+ TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+ IRDA_IRDAI,
+ SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2,
+ JPU_JPUI,
+ MMC_MMCI0, MMC_MMCI1, MMC_MMCI2,
+ LCDC_LCDCI,
+ TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2,
+
+ /* interrupt groups */
+ DMAC1A, _2DG, DMAC0A, VIO, RTC,
+ DMAC1B, DMAC0B, I2C0, I2C1, SDHI0, SDHI1, SPU, MMC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+ INTC_VECT(DMAC1A_DEI0, 0x700),
+ INTC_VECT(DMAC1A_DEI1, 0x720),
+ INTC_VECT(DMAC1A_DEI2, 0x740),
+ INTC_VECT(DMAC1A_DEI3, 0x760),
+
+ INTC_VECT(_2DG_TRI, 0x780),
+ INTC_VECT(_2DG_INI, 0x7A0),
+ INTC_VECT(_2DG_CEI, 0x7C0),
+ INTC_VECT(_2DG_BRK, 0x7E0),
+
+ INTC_VECT(DMAC0A_DEI0, 0x800),
+ INTC_VECT(DMAC0A_DEI1, 0x820),
+ INTC_VECT(DMAC0A_DEI2, 0x840),
+ INTC_VECT(DMAC0A_DEI3, 0x860),
+
+ INTC_VECT(VIO_CEU20I, 0x880),
+ INTC_VECT(VIO_BEU20I, 0x8A0),
+ INTC_VECT(VIO_VEU3F1, 0x8C0),
+ INTC_VECT(VIO_VOUI, 0x8E0),
+
+ INTC_VECT(SCIFA_SCIFA0, 0x900),
+ INTC_VECT(VPU_VPUI, 0x980),
+ INTC_VECT(TPU_TPUI, 0x9A0),
+ INTC_VECT(CEU21I, 0x9E0),
+ INTC_VECT(BEU21I, 0xA00),
+ INTC_VECT(USB_USI0, 0xA20),
+ INTC_VECT(ATAPI, 0xA60),
+
+ INTC_VECT(RTC_ATI, 0xA80),
+ INTC_VECT(RTC_PRI, 0xAA0),
+ INTC_VECT(RTC_CUI, 0xAC0),
+
+ INTC_VECT(DMAC1B_DEI4, 0xB00),
+ INTC_VECT(DMAC1B_DEI5, 0xB20),
+ INTC_VECT(DMAC1B_DADERR, 0xB40),
+
+ INTC_VECT(DMAC0B_DEI4, 0xB80),
+ INTC_VECT(DMAC0B_DEI5, 0xBA0),
+ INTC_VECT(DMAC0B_DADERR, 0xBC0),
+
+ INTC_VECT(KEYSC_KEYI, 0xBE0),
+ INTC_VECT(SCIF_SCIF0, 0xC00),
+ INTC_VECT(SCIF_SCIF1, 0xC20),
+ INTC_VECT(SCIF_SCIF2, 0xC40),
+ INTC_VECT(VEU3F0I, 0xC60),
+ INTC_VECT(MSIOF_MSIOFI0, 0xC80),
+ INTC_VECT(MSIOF_MSIOFI1, 0xCA0),
+ INTC_VECT(SPU_SPUI0, 0xCC0),
+ INTC_VECT(SPU_SPUI1, 0xCE0),
+ INTC_VECT(SCIFA_SCIFA1, 0xD00),
+
+/* INTC_VECT(ICB_ICBI, 0xD20), */
+ INTC_VECT(ETHI, 0xD60),
+
+ INTC_VECT(I2C1_ALI, 0xD80),
+ INTC_VECT(I2C1_TACKI, 0xDA0),
+ INTC_VECT(I2C1_WAITI, 0xDC0),
+ INTC_VECT(I2C1_DTEI, 0xDE0),
+
+ INTC_VECT(I2C0_ALI, 0xE00),
+ INTC_VECT(I2C0_TACKI, 0xE20),
+ INTC_VECT(I2C0_WAITI, 0xE40),
+ INTC_VECT(I2C0_DTEI, 0xE60),
+
+ INTC_VECT(SDHI0_SDHII0, 0xE80),
+ INTC_VECT(SDHI0_SDHII1, 0xEA0),
+ INTC_VECT(SDHI0_SDHII2, 0xEC0),
+
+ INTC_VECT(CMT_CMTI, 0xF00),
+ INTC_VECT(TSIF_TSIFI, 0xF20),
+/* INTC_VECT(ICB_LMBI, 0xF60), */
+ INTC_VECT(FSI_FSI, 0xF80),
+ INTC_VECT(SCIFA_SCIFA2, 0xFA0),
+
+ INTC_VECT(TMU0_TUNI0, 0x400),
+ INTC_VECT(TMU0_TUNI1, 0x420),
+ INTC_VECT(TMU0_TUNI2, 0x440),
+
+ INTC_VECT(IRDA_IRDAI, 0x480),
+
+ INTC_VECT(SDHI1_SDHII0, 0x4E0),
+ INTC_VECT(SDHI1_SDHII1, 0x500),
+ INTC_VECT(SDHI1_SDHII2, 0x520),
+
+ INTC_VECT(JPU_JPUI, 0x560),
+
+ INTC_VECT(MMC_MMCI0, 0x580),
+ INTC_VECT(MMC_MMCI1, 0x5A0),
+ INTC_VECT(MMC_MMCI2, 0x5C0),
+
+ INTC_VECT(LCDC_LCDCI, 0xF40),
+
+ INTC_VECT(TMU1_TUNI0, 0x920),
+ INTC_VECT(TMU1_TUNI1, 0x940),
+ INTC_VECT(TMU1_TUNI2, 0x960),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(DMAC1A, DMAC1A_DEI0, DMAC1A_DEI1, DMAC1A_DEI2, DMAC1A_DEI3),
+ INTC_GROUP(_2DG, _2DG_TRI, _2DG_INI, _2DG_CEI, _2DG_BRK),
+ INTC_GROUP(DMAC0A, DMAC0A_DEI0, DMAC0A_DEI1, DMAC0A_DEI2, DMAC0A_DEI3),
+ INTC_GROUP(VIO, VIO_CEU20I, VIO_BEU20I, VIO_VEU3F1, VIO_VOUI),
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(DMAC1B, DMAC1B_DEI4, DMAC1B_DEI5, DMAC1B_DADERR),
+ INTC_GROUP(DMAC0B, DMAC0B_DEI4, DMAC0B_DEI5, DMAC0B_DADERR),
+ INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+ INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+ INTC_GROUP(SDHI0, SDHI0_SDHII0, SDHI0_SDHII1, SDHI0_SDHII2),
+ INTC_GROUP(SDHI1, SDHI1_SDHII0, SDHI1_SDHII1, SDHI1_SDHII2),
+ INTC_GROUP(SPU, SPU_SPUI0, SPU_SPUI1),
+ INTC_GROUP(MMC, MMC_MMCI0, MMC_MMCI1, MMC_MMCI2),
+};
+
+/* FIXMEEEEEEEEEEEEEEEEEEE !!!!! */
+/* very bad manual !! */
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+ { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
+ /*SDHII3?*/0, SDHI1_SDHII2, SDHI1_SDHII1, SDHI1_SDHII0 } },
+ { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+ { VIO_VOUI, VIO_VEU3F1, VIO_BEU20I, VIO_CEU20I,
+ DMAC0A_DEI3, DMAC0A_DEI2, DMAC0A_DEI1, DMAC0A_DEI0 } },
+ { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+ { 0, 0, 0, VPU_VPUI, ATAPI, ETHI, 0, /*SCIFA3*/SCIFA_SCIFA0 } },
+ { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+ { DMAC1A_DEI3, DMAC1A_DEI2, DMAC1A_DEI1, DMAC1A_DEI0,
+ SPU_SPUI1, SPU_SPUI0, BEU21I, IRDA_IRDAI } },
+ { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+ { 0, TMU0_TUNI2, TMU0_TUNI1, TMU0_TUNI0,
+ JPU_JPUI, 0, 0, LCDC_LCDCI } },
+ { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+ { KEYSC_KEYI, DMAC0B_DADERR, DMAC0B_DEI5, DMAC0B_DEI4,
+ VEU3F0I, SCIF_SCIF2, SCIF_SCIF1, SCIF_SCIF0 } },
+ { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+ { 0, 0, /*ICB_ICBI*/0, /*SCIFA4*/SCIFA_SCIFA1,
+ CEU21I, 0, MSIOF_MSIOFI1, MSIOF_MSIOFI0 } },
+ { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+ { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+ I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI } },
+ { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+ { /*SDHII3*/0, SDHI0_SDHII2, SDHI0_SDHII1, SDHI0_SDHII0,
+ 0, 0, /*SCIFA5*/SCIFA_SCIFA2, FSI_FSI } },
+ { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+ { 0, 0, 0, CMT_CMTI, 0, /*USB1*/0, USB_USI0, 0 } },
+ { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+ { 0, DMAC1B_DADERR, DMAC1B_DEI5, DMAC1B_DEI4,
+ 0, RTC_ATI, RTC_PRI, RTC_CUI } },
+ { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+ { _2DG_BRK, _2DG_CEI, _2DG_INI, _2DG_TRI,
+ 0, TPU_TPUI, /*ICB_LMBI*/0, TSIF_TSIFI } },
+ { 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+ { 0, 0, 0, 0, 0, 0, 0, 0/*2DDMAC*/ } },
+ { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1,
+ TMU0_TUNI2, IRDA_IRDAI } },
+ { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU_JPUI, LCDC_LCDCI,
+ DMAC1A, BEU21I } },
+ { 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1,
+ TMU1_TUNI2, SPU } },
+ { 0xa408000c, 0, 16, 4, /* IPRD */ { 0, MMC, 0, ATAPI } },
+ { 0xa4080010, 0, 16, 4, /* IPRE */
+ { DMAC0A, /*BEU?VEU?*/VIO, /*SCIFA3*/SCIFA_SCIFA0, /*VPU5F*/
+ VPU_VPUI } },
+ { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B,
+ USB_USI0, CMT_CMTI } },
+ { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1,
+ SCIF_SCIF2, VEU3F0I } },
+ { 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0, MSIOF_MSIOFI1,
+ I2C1, I2C0 } },
+ { 0xa4080020, 0, 16, 4, /* IPRI */ { /*SCIFA4*/SCIFA_SCIFA1, /*ICB*/0,
+ TSIF_TSIFI, _2DG/*ICB?*/ } },
+ { 0xa4080024, 0, 16, 4, /* IPRJ */ { CEU21I, ETHI, FSI_FSI, SDHI1 } },
+ { 0xa4080028, 0, 16, 4, /* IPRK */ { RTC, DMAC1B, /*ICB?*/0, SDHI0 } },
+ { 0xa408002c, 0, 16, 4, /* IPRL */ { /*SCIFA5*/SCIFA_SCIFA2, 0,
+ TPU_TPUI, /*2DDMAC*/0 } },
+ { 0xa4140010, 0, 32, 4, /* INTPRI00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xa414001c, 16, 2, /* ICR1 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+ { 0xa4140024, 0, 8, /* INTREQ00 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7724", vectors, groups,
+ mask_registers, prio_registers, sense_registers,
+ ack_registers);
+
+void __init plat_irq_setup(void)
+{
+ register_intc_controller(&intc_desc);
+}
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/sh_timer.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
.resource = usbf_resources,
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 28,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 29,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 30,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffd88008,
+ .end = 0xffd88013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 96,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffd88014,
+ .end = 0xffd8801f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffd88020,
+ .end = 0xffd8802b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 98,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
static struct platform_device *sh7763_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
&rtc_device,
&sci_device,
&usb_ohci_device,
}
__initcall(sh7763_devices_setup);
+static struct platform_device *sh7763_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7763_early_devices,
+ ARRAY_SIZE(sh7763_early_devices));
+}
+
enum {
UNUSED = 0,
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <linux/io.h>
static struct plat_sci_port sci_platform_data[] = {
{
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffd81008,
+ .end = 0xffd81013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 19,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffd81014,
+ .end = 0xffd8101f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffd81020,
+ .end = 0xffd8102f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
+static struct sh_timer_config tmu6_platform_data = {
+ .name = "TMU6",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu6_resources[] = {
+ [0] = {
+ .name = "TMU6",
+ .start = 0xffd82008,
+ .end = 0xffd82013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu6_device = {
+ .name = "sh_tmu",
+ .id = 6,
+ .dev = {
+ .platform_data = &tmu6_platform_data,
+ },
+ .resource = tmu6_resources,
+ .num_resources = ARRAY_SIZE(tmu6_resources),
+};
+
+static struct sh_timer_config tmu7_platform_data = {
+ .name = "TMU7",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu7_resources[] = {
+ [0] = {
+ .name = "TMU7",
+ .start = 0xffd82014,
+ .end = 0xffd8201f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 23,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu7_device = {
+ .name = "sh_tmu",
+ .id = 7,
+ .dev = {
+ .platform_data = &tmu7_platform_data,
+ },
+ .resource = tmu7_resources,
+ .num_resources = ARRAY_SIZE(tmu7_resources),
+};
+
+static struct sh_timer_config tmu8_platform_data = {
+ .name = "TMU8",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu8_resources[] = {
+ [0] = {
+ .name = "TMU8",
+ .start = 0xffd82020,
+ .end = 0xffd8202b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu8_device = {
+ .name = "sh_tmu",
+ .id = 8,
+ .dev = {
+ .platform_data = &tmu8_platform_data,
+ },
+ .resource = tmu8_resources,
+ .num_resources = ARRAY_SIZE(tmu8_resources),
+};
+
static struct platform_device *sh7770_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+ &tmu6_device,
+ &tmu7_device,
+ &tmu8_device,
&sci_device,
};
}
__initcall(sh7770_devices_setup);
+static struct platform_device *sh7770_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+ &tmu6_device,
+ &tmu7_device,
+ &tmu8_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7770_early_devices,
+ ARRAY_SIZE(sh7770_early_devices));
+}
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL,
+
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+
+ GPIO,
+ TMU0, TMU1, TMU2, TMU2_TICPI,
+ TMU3, TMU4, TMU5, TMU5_TICPI,
+ TMU6, TMU7, TMU8,
+ HAC, IPI, SPDIF, HUDI, I2C,
+ DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
+ I2S0, I2S1, I2S2, I2S3,
+ SRC_RX, SRC_TX, SRC_SPDIF,
+ DU, VIDEO_IN, REMOTE, YUV, USB, ATAPI, CAN, GPS, GFX2D,
+ GFX3D_MBX, GFX3D_DMAC,
+ EXBUS_ATA,
+ SPI0, SPI1,
+ SCIF089, SCIF1234, SCIF567,
+ ADC,
+ BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+ BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+ BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31,
+
+ /* interrupt groups */
+ TMU, DMAC, I2S, SRC, GFX3D, SPI, SCIF, BBDMAC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(GPIO, 0x3e0),
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(TMU3, 0x480), INTC_VECT(TMU4, 0x4a0),
+ INTC_VECT(TMU5, 0x4c0), INTC_VECT(TMU5_TICPI, 0x4e0),
+ INTC_VECT(TMU6, 0x500), INTC_VECT(TMU7, 0x520),
+ INTC_VECT(TMU8, 0x540),
+ INTC_VECT(HAC, 0x580), INTC_VECT(IPI, 0x5c0),
+ INTC_VECT(SPDIF, 0x5e0),
+ INTC_VECT(HUDI, 0x600), INTC_VECT(I2C, 0x620),
+ INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
+ INTC_VECT(DMAC0_DMINT2, 0x680),
+ INTC_VECT(I2S0, 0x6a0), INTC_VECT(I2S1, 0x6c0),
+ INTC_VECT(I2S2, 0x6e0), INTC_VECT(I2S3, 0x700),
+ INTC_VECT(SRC_RX, 0x720), INTC_VECT(SRC_TX, 0x740),
+ INTC_VECT(SRC_SPDIF, 0x760),
+ INTC_VECT(DU, 0x780), INTC_VECT(VIDEO_IN, 0x7a0),
+ INTC_VECT(REMOTE, 0x7c0), INTC_VECT(YUV, 0x7e0),
+ INTC_VECT(USB, 0x840), INTC_VECT(ATAPI, 0x860),
+ INTC_VECT(CAN, 0x880), INTC_VECT(GPS, 0x8a0),
+ INTC_VECT(GFX2D, 0x8c0),
+ INTC_VECT(GFX3D_MBX, 0x900), INTC_VECT(GFX3D_DMAC, 0x920),
+ INTC_VECT(EXBUS_ATA, 0x940),
+ INTC_VECT(SPI0, 0x960), INTC_VECT(SPI1, 0x980),
+ INTC_VECT(SCIF089, 0x9a0), INTC_VECT(SCIF1234, 0x9c0),
+ INTC_VECT(SCIF1234, 0x9e0), INTC_VECT(SCIF1234, 0xa00),
+ INTC_VECT(SCIF1234, 0xa20), INTC_VECT(SCIF567, 0xa40),
+ INTC_VECT(SCIF567, 0xa60), INTC_VECT(SCIF567, 0xa80),
+ INTC_VECT(SCIF089, 0xaa0), INTC_VECT(SCIF089, 0xac0),
+ INTC_VECT(ADC, 0xb20),
+ INTC_VECT(BBDMAC_0_3, 0xba0), INTC_VECT(BBDMAC_0_3, 0xbc0),
+ INTC_VECT(BBDMAC_0_3, 0xbe0), INTC_VECT(BBDMAC_0_3, 0xc00),
+ INTC_VECT(BBDMAC_4_7, 0xc20), INTC_VECT(BBDMAC_4_7, 0xc40),
+ INTC_VECT(BBDMAC_4_7, 0xc60), INTC_VECT(BBDMAC_4_7, 0xc80),
+ INTC_VECT(BBDMAC_8_10, 0xca0), INTC_VECT(BBDMAC_8_10, 0xcc0),
+ INTC_VECT(BBDMAC_8_10, 0xce0), INTC_VECT(BBDMAC_11_14, 0xd00),
+ INTC_VECT(BBDMAC_11_14, 0xd20), INTC_VECT(BBDMAC_11_14, 0xd40),
+ INTC_VECT(BBDMAC_11_14, 0xd60), INTC_VECT(BBDMAC_15_18, 0xd80),
+ INTC_VECT(BBDMAC_15_18, 0xda0), INTC_VECT(BBDMAC_15_18, 0xdc0),
+ INTC_VECT(BBDMAC_15_18, 0xde0), INTC_VECT(BBDMAC_19_22, 0xe00),
+ INTC_VECT(BBDMAC_19_22, 0xe20), INTC_VECT(BBDMAC_19_22, 0xe40),
+ INTC_VECT(BBDMAC_19_22, 0xe60), INTC_VECT(BBDMAC_23_26, 0xe80),
+ INTC_VECT(BBDMAC_23_26, 0xea0), INTC_VECT(BBDMAC_23_26, 0xec0),
+ INTC_VECT(BBDMAC_23_26, 0xee0), INTC_VECT(BBDMAC_27, 0xf00),
+ INTC_VECT(BBDMAC_28, 0xf20), INTC_VECT(BBDMAC_29, 0xf40),
+ INTC_VECT(BBDMAC_30, 0xf60), INTC_VECT(BBDMAC_31, 0xf80),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(TMU, TMU0, TMU1, TMU2, TMU2_TICPI, TMU3, TMU4, TMU5,
+ TMU5_TICPI, TMU6, TMU7, TMU8),
+ INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2),
+ INTC_GROUP(I2S, I2S0, I2S1, I2S2, I2S3),
+ INTC_GROUP(SRC, SRC_RX, SRC_TX, SRC_SPDIF),
+ INTC_GROUP(GFX3D, GFX3D_MBX, GFX3D_DMAC),
+ INTC_GROUP(SPI, SPI0, SPI1),
+ INTC_GROUP(SCIF, SCIF089, SCIF1234, SCIF567),
+ INTC_GROUP(BBDMAC,
+ BBDMAC_0_3, BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14,
+ BBDMAC_15_18, BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27,
+ BBDMAC_28, BBDMAC_29, BBDMAC_30, BBDMAC_31),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { 0xffe00040, 0xffe00044, 32, /* INT2MSKR / INT2MSKCR */
+ { 0, BBDMAC, ADC, SCIF, SPI, EXBUS_ATA, GFX3D, GFX2D,
+ GPS, CAN, ATAPI, USB, YUV, REMOTE, VIDEO_IN, DU, SRC, I2S,
+ DMAC, I2C, HUDI, SPDIF, IPI, HAC, TMU, GPIO } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xffe00000, 0, 32, 8, /* INT2PRI0 */ { GPIO, TMU0, 0, HAC } },
+ { 0xffe00004, 0, 32, 8, /* INT2PRI1 */ { IPI, SPDIF, HUDI, I2C } },
+ { 0xffe00008, 0, 32, 8, /* INT2PRI2 */ { DMAC, I2S, SRC, DU } },
+ { 0xffe0000c, 0, 32, 8, /* INT2PRI3 */ { VIDEO_IN, REMOTE, YUV, USB } },
+ { 0xffe00010, 0, 32, 8, /* INT2PRI4 */ { ATAPI, CAN, GPS, GFX2D } },
+ { 0xffe00014, 0, 32, 8, /* INT2PRI5 */ { 0, GFX3D, EXBUS_ATA, SPI } },
+ { 0xffe00018, 0, 32, 8, /* INT2PRI6 */ { SCIF1234, SCIF567, SCIF089 } },
+ { 0xffe0001c, 0, 32, 8, /* INT2PRI7 */ { ADC, 0, 0, BBDMAC_0_3 } },
+ { 0xffe00020, 0, 32, 8, /* INT2PRI8 */
+ { BBDMAC_4_7, BBDMAC_8_10, BBDMAC_11_14, BBDMAC_15_18 } },
+ { 0xffe00024, 0, 32, 8, /* INT2PRI9 */
+ { BBDMAC_19_22, BBDMAC_23_26, BBDMAC_27, BBDMAC_28 } },
+ { 0xffe00028, 0, 32, 8, /* INT2PRI10 */
+ { BBDMAC_29, BBDMAC_30, BBDMAC_31 } },
+ { 0xffe0002c, 0, 32, 8, /* INT2PRI11 */
+ { TMU1, TMU2, TMU2_TICPI, TMU3 } },
+ { 0xffe00030, 0, 32, 8, /* INT2PRI12 */
+ { TMU4, TMU5, TMU5_TICPI, TMU6 } },
+ { 0xffe00034, 0, 32, 8, /* INT2PRI13 */
+ { TMU7, TMU8 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7770", vectors, groups,
+ mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+static struct intc_vect irq_vectors[] __initdata = {
+ INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
+ INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
+ INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380),
+};
+
+static struct intc_mask_reg irq_mask_registers[] __initdata = {
+ { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, } },
+};
+
+static struct intc_prio_reg irq_prio_registers[] __initdata = {
+ { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, } },
+};
+
+static struct intc_sense_reg irq_sense_registers[] __initdata = {
+ { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, } },
+};
+
+static DECLARE_INTC_DESC(intc_irq_desc, "sh7770-irq", irq_vectors,
+ NULL, irq_mask_registers, irq_prio_registers,
+ irq_sense_registers);
+
+/* External interrupt pins in IRL mode */
+static struct intc_vect irl_vectors[] __initdata = {
+ INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+ INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+ INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+ INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+ INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+ INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+ INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+ INTC_VECT(IRL_HHHL, 0x3c0),
+};
+
+static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+ { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL, } },
+};
+
+static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors,
+ NULL, irl7654_mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
+ NULL, irl3210_mask_registers, NULL, NULL);
+
+#define INTC_ICR0 0xffd00000
+#define INTC_INTMSK0 0xffd00044
+#define INTC_INTMSK1 0xffd00048
+#define INTC_INTMSK2 0xffd40080
+#define INTC_INTMSKCLR1 0xffd00068
+#define INTC_INTMSKCLR2 0xffd40084
+
void __init plat_irq_setup(void)
{
+ /* disable IRQ7-0 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ /* disable holding function, ie enable "SH-4 Mode" */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
+ register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ:
+ /* select IRQ mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
+ register_intc_controller(&intc_irq_desc);
+ break;
+ case IRQ_MODE_IRL7654:
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_irl7654_desc);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_irl3210_desc);
+ break;
+ default:
+ BUG();
+ }
}
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 28,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 29,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 30,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffdc0008,
+ .end = 0xffdc0013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 96,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffdc0014,
+ .end = 0xffdc001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffdc0020,
+ .end = 0xffdc002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 98,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
static struct resource rtc_resources[] = {
[0] = {
};
static struct platform_device *sh7780_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
&rtc_device,
&sci_device,
};
}
__initcall(sh7780_devices_setup);
+static struct platform_device *sh7780_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7780_early_devices,
+ ARRAY_SIZE(sh7780_early_devices));
+}
+
enum {
UNUSED = 0,
#include <linux/serial_sci.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/sh_timer.h>
#include <asm/mmzone.h>
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu012_fck",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 28,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu012_fck",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 29,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu012_fck",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 30,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "tmu345_fck",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffdc0008,
+ .end = 0xffdc0013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 96,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "tmu345_fck",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffdc0014,
+ .end = 0xffdc001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "tmu345_fck",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffdc0020,
+ .end = 0xffdc002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 98,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffea0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 40, 40, 40, 40 },
+ .clk = "scif_fck",
}, {
.mapbase = 0xffeb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 44, 44, 44, 44 },
+ .clk = "scif_fck",
}, {
.mapbase = 0xffec0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 60, 60, 60, 60 },
+ .clk = "scif_fck",
}, {
.mapbase = 0xffed0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 61, 61, 61, 61 },
+ .clk = "scif_fck",
}, {
.mapbase = 0xffee0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 62, 62, 62, 62 },
+ .clk = "scif_fck",
}, {
.mapbase = 0xffef0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 63, 63, 63, 63 },
+ .clk = "scif_fck",
}, {
.flags = 0,
}
};
static struct platform_device *sh7785_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
&sci_device,
};
}
__initcall(sh7785_devices_setup);
+static struct platform_device *sh7785_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7785_early_devices,
+ ARRAY_SIZE(sh7785_early_devices));
+}
+
enum {
UNUSED = 0,
*
* Copyright (C) 2009 Renesas Solutions Corp.
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Paul Mundt <paul.mundt@renesas.com>
*
* Based on SH7785 Setup
*
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <linux/sh_timer.h>
#include <asm/mmzone.h>
static struct plat_sci_port sci_platform_data[] = {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffda0008,
+ .end = 0xffda0013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffda0014,
+ .end = 0xffda001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffda0020,
+ .end = 0xffda002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
+static struct sh_timer_config tmu6_platform_data = {
+ .name = "TMU6",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu6_resources[] = {
+ [0] = {
+ .name = "TMU6",
+ .start = 0xffdc0008,
+ .end = 0xffdc0013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu6_device = {
+ .name = "sh_tmu",
+ .id = 6,
+ .dev = {
+ .platform_data = &tmu6_platform_data,
+ },
+ .resource = tmu6_resources,
+ .num_resources = ARRAY_SIZE(tmu6_resources),
+};
+
+static struct sh_timer_config tmu7_platform_data = {
+ .name = "TMU7",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu7_resources[] = {
+ [0] = {
+ .name = "TMU7",
+ .start = 0xffdc0014,
+ .end = 0xffdc001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu7_device = {
+ .name = "sh_tmu",
+ .id = 7,
+ .dev = {
+ .platform_data = &tmu7_platform_data,
+ },
+ .resource = tmu7_resources,
+ .num_resources = ARRAY_SIZE(tmu7_resources),
+};
+
+static struct sh_timer_config tmu8_platform_data = {
+ .name = "TMU8",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu8_resources[] = {
+ [0] = {
+ .name = "TMU8",
+ .start = 0xffdc0020,
+ .end = 0xffdc002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 45,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu8_device = {
+ .name = "sh_tmu",
+ .id = 8,
+ .dev = {
+ .platform_data = &tmu8_platform_data,
+ },
+ .resource = tmu8_resources,
+ .num_resources = ARRAY_SIZE(tmu8_resources),
+};
+
+static struct sh_timer_config tmu9_platform_data = {
+ .name = "TMU9",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu9_resources[] = {
+ [0] = {
+ .name = "TMU9",
+ .start = 0xffde0008,
+ .end = 0xffde0013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 46,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu9_device = {
+ .name = "sh_tmu",
+ .id = 9,
+ .dev = {
+ .platform_data = &tmu9_platform_data,
+ },
+ .resource = tmu9_resources,
+ .num_resources = ARRAY_SIZE(tmu9_resources),
+};
+
+static struct sh_timer_config tmu10_platform_data = {
+ .name = "TMU10",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu10_resources[] = {
+ [0] = {
+ .name = "TMU10",
+ .start = 0xffde0014,
+ .end = 0xffde001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 46,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu10_device = {
+ .name = "sh_tmu",
+ .id = 10,
+ .dev = {
+ .platform_data = &tmu10_platform_data,
+ },
+ .resource = tmu10_resources,
+ .num_resources = ARRAY_SIZE(tmu10_resources),
+};
+
+static struct sh_timer_config tmu11_platform_data = {
+ .name = "TMU11",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu11_resources[] = {
+ [0] = {
+ .name = "TMU11",
+ .start = 0xffde0020,
+ .end = 0xffde002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 46,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu11_device = {
+ .name = "sh_tmu",
+ .id = 11,
+ .dev = {
+ .platform_data = &tmu11_platform_data,
+ },
+ .resource = tmu11_resources,
+ .num_resources = ARRAY_SIZE(tmu11_resources),
+};
+
static struct resource usb_ohci_resources[] = {
[0] = {
.start = 0xffe70400,
.resource = usb_ohci_resources,
};
+static struct platform_device *sh7786_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+ &tmu6_device,
+ &tmu7_device,
+ &tmu8_device,
+ &tmu9_device,
+ &tmu10_device,
+ &tmu11_device,
+};
+
static struct platform_device *sh7786_devices[] __initdata = {
&sci_device,
&usb_ohci_device,
static int __init sh7786_devices_setup(void)
{
+ int ret;
+
sh7786_usb_setup();
+
+ ret = platform_add_devices(sh7786_early_devices,
+ ARRAY_SIZE(sh7786_early_devices));
+ if (unlikely(ret != 0))
+ return ret;
+
return platform_add_devices(sh7786_devices,
ARRAY_SIZE(sh7786_devices));
}
device_initcall(sh7786_devices_setup);
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7786_early_devices,
+ ARRAY_SIZE(sh7786_early_devices));
+}
+
enum {
UNUSED = 0,
/*
- * SH-X3 Setup
+ * SH-X3 Prototype Setup
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/io.h>
+#include <linux/sh_timer.h>
#include <asm/mmzone.h>
static struct plat_sci_port sci_platform_data[] = {
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffc10008,
+ .end = 0xffc10013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffc10014,
+ .end = 0xffc1001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffc10020,
+ .end = 0xffc1002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+ .name = "TMU3",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu3_resources[] = {
+ [0] = {
+ .name = "TMU3",
+ .start = 0xffc20008,
+ .end = 0xffc20013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 19,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu3_device = {
+ .name = "sh_tmu",
+ .id = 3,
+ .dev = {
+ .platform_data = &tmu3_platform_data,
+ },
+ .resource = tmu3_resources,
+ .num_resources = ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+ .name = "TMU4",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu4_resources[] = {
+ [0] = {
+ .name = "TMU4",
+ .start = 0xffc20014,
+ .end = 0xffc2001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu4_device = {
+ .name = "sh_tmu",
+ .id = 4,
+ .dev = {
+ .platform_data = &tmu4_platform_data,
+ },
+ .resource = tmu4_resources,
+ .num_resources = ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+ .name = "TMU5",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu5_resources[] = {
+ [0] = {
+ .name = "TMU5",
+ .start = 0xffc20020,
+ .end = 0xffc2002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu5_device = {
+ .name = "sh_tmu",
+ .id = 5,
+ .dev = {
+ .platform_data = &tmu5_platform_data,
+ },
+ .resource = tmu5_resources,
+ .num_resources = ARRAY_SIZE(tmu5_resources),
+};
+
+static struct platform_device *shx3_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+ &tmu3_device,
+ &tmu4_device,
+ &tmu5_device,
+};
+
static struct platform_device *shx3_devices[] __initdata = {
&sci_device,
};
static int __init shx3_devices_setup(void)
{
+ int ret;
+
+ ret = platform_add_devices(shx3_early_devices,
+ ARRAY_SIZE(shx3_early_devices));
+ if (unlikely(ret != 0))
+ return ret;
+
return platform_add_devices(shx3_devices,
ARRAY_SIZE(shx3_devices));
}
__initcall(shx3_devices_setup);
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(shx3_early_devices,
+ ARRAY_SIZE(shx3_early_devices));
+}
+
enum {
UNUSED = 0,
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_KALLSYMS) += unwind.o
+# CPU subtype setup
+obj-$(CONFIG_CPU_SH5) += setup-sh5.o
+
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH5) := clock-sh5.o
.init = master_clk_init,
};
-static void module_clk_recalc(struct clk *clk)
+static unsigned long module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(cprc_base) >> 12) & 0x0007;
- clk->rate = clk->parent->rate / ifc_table[idx];
+ return clk->parent->rate / ifc_table[idx];
}
static struct clk_ops sh5_module_clk_ops = {
.recalc = module_clk_recalc,
};
-static void bus_clk_recalc(struct clk *clk)
+static unsigned long bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(cprc_base) >> 3) & 0x0007;
- clk->rate = clk->parent->rate / ifc_table[idx];
+ return clk->parent->rate / ifc_table[idx];
}
static struct clk_ops sh5_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
-static void cpu_clk_recalc(struct clk *clk)
+static unsigned long cpu_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(cprc_base) & 0x0007);
- clk->rate = clk->parent->rate / ifc_table[idx];
+ return clk->parent->rate / ifc_table[idx];
}
static struct clk_ops sh5_cpu_clk_ops = {
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
- cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+ cprc_base = (unsigned long)ioremap_nocache(CPRC_BASE, 1024);
BUG_ON(!cprc_base);
if (idx < ARRAY_SIZE(sh5_clk_ops))
! exceptions
add SP, ZERO, r14
-#ifdef CONFIG_POOR_MANS_STRACE
- /* We've pushed all the registers now, so only r2-r4 hold anything
- * useful. Move them into callee save registers */
- or r2, ZERO, r28
- or r3, ZERO, r29
- or r4, ZERO, r30
-
- /* Preserve r2 as the event code */
- movi evt_debug, r3
- ori r3, 1, r3
- ptabs r3, tr0
-
- or SP, ZERO, r6
- getcon TRA, r5
- blink tr0, LINK
-
- or r28, ZERO, r2
- or r29, ZERO, r3
- or r30, ZERO, r4
-#endif
-
/* For syscall and debug race condition, get TRA now */
getcon TRA, r5
*/
.global ret_from_irq
ret_from_irq:
-#ifdef CONFIG_POOR_MANS_STRACE
- pta evt_debug_ret_from_irq, tr0
- ori SP, 0, r2
- blink tr0, LINK
-#endif
ld.q SP, FRAME_S(FSSR), r6
shlri r6, 30, r6
andi r6, 1, r6
ret_from_exception:
preempt_stop()
-#ifdef CONFIG_POOR_MANS_STRACE
- pta evt_debug_ret_from_exc, tr0
- ori SP, 0, r2
- blink tr0, LINK
-#endif
-
ld.q SP, FRAME_S(FSSR), r6
shlri r6, 30, r6
andi r6, 1, r6
.global syscall_ret
syscall_ret:
st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */
-
-#ifdef CONFIG_POOR_MANS_STRACE
- /* nothing useful in registers at this point */
-
- movi evt_debug2, r5
- ori r5, 1, r5
- ptabs r5, tr0
- ld.q SP, FRAME_R(9), r2
- or SP, ZERO, r3
- blink tr0, LINK
-#endif
-
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
ptabs r5, tr0
blink tr0, LINK
-#ifdef CONFIG_POOR_MANS_STRACE
- /* nothing useful in registers at this point */
-
- movi evt_debug2, r5
- ori r5, 1, r5
- ptabs r5, tr0
- ld.q SP, FRAME_R(9), r2
- or SP, ZERO, r3
- blink tr0, LINK
-#endif
-
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO
-
-
syscall_allowed:
/* Use LINK to deflect the exit point, default is syscall_ret */
pta syscall_ret, tr0
r2(out) : result quadword
This is provided as a cheapskate way of manipulating device
- registers for debugging (to avoid the need to onchip_remap the debug
- module, and to avoid the need to onchip_remap the watchpoint
+ registers for debugging (to avoid the need to ioremap the debug
+ module, and to avoid the need to ioremap the watchpoint
controller in a way that identity maps sufficient bits to avoid the
SH5-101 cut2 silicon defect).
r3 : quadword value to write.
This is provided as a cheapskate way of manipulating device
- registers for debugging (to avoid the need to onchip_remap the debug
- module, and to avoid the need to onchip_remap the watchpoint
+ registers for debugging (to avoid the need to ioremap the debug
+ module, and to avoid the need to ioremap the watchpoint
controller in a way that identity maps sufficient bits to avoid the
SH5-101 cut2 silicon defect).
--- /dev/null
+/*
+ * SH5-101/SH5-103 CPU Setup
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/sh_timer.h>
+#include <asm/addrspace.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = PHYS_PERIPHERAL_BLOCK + 0x01030000,
+ .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+ .type = PORT_SCIF,
+ .irqs = { 39, 40, 42, 0 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = PHYS_PERIPHERAL_BLOCK + 0x01040000,
+ .end = PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = IRQ_PRI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = IRQ_CUI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = IRQ_ATI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+#define TMU_BLOCK_OFF 0x01020000
+#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE (TMU_BASE + 0x8 + (0xc * 0x0))
+#define TMU1_BASE (TMU_BASE + 0x8 + (0xc * 0x1))
+#define TMU2_BASE (TMU_BASE + 0x8 + (0xc * 0x2))
+
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "peripheral_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = TMU0_BASE,
+ .end = TMU0_BASE + 0xc - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TUNI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "peripheral_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = TMU1_BASE,
+ .end = TMU1_BASE + 0xc - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TUNI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "peripheral_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = TMU2_BASE,
+ .end = TMU2_BASE + 0xc - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TUNI2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+static struct platform_device *sh5_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+static struct platform_device *sh5_devices[] __initdata = {
+ &sci_device,
+ &rtc_device,
+};
+
+static int __init sh5_devices_setup(void)
+{
+ int ret;
+
+ ret = platform_add_devices(sh5_early_devices,
+ ARRAY_SIZE(sh5_early_devices));
+ if (unlikely(ret != 0))
+ return ret;
+
+ return platform_add_devices(sh5_devices,
+ ARRAY_SIZE(sh5_devices));
+}
+__initcall(sh5_devices_setup);
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh5_early_devices,
+ ARRAY_SIZE(sh5_early_devices));
+}
* for more details.
*/
#include <linux/module.h>
+#include <linux/pci.h>
#include <asm/machvec.h>
#include <asm/io.h>
int handle_trapped_io(struct pt_regs *regs, unsigned long address)
{
mm_segment_t oldfs;
- opcode_t instruction;
+ insn_size_t instruction;
int tmp;
if (!lookup_tiop(address))
}
#if defined(CONFIG_PROC_FS)
+/*
+ * /proc/interrupts printing:
+ */
+static int show_other_interrupts(struct seq_file *p, int prec)
+{
+ seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+ return 0;
+}
+
int show_interrupts(struct seq_file *p, void *v)
{
- int i = *(loff_t *) v, j;
- struct irqaction * action;
- unsigned long flags;
+ unsigned long flags, any_count = 0;
+ int i = *(loff_t *)v, j, prec;
+ struct irqaction *action;
+ struct irq_desc *desc;
+
+ if (i > nr_irqs)
+ return 0;
+
+ for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec)
+ j *= 10;
+
+ if (i == nr_irqs)
+ return show_other_interrupts(p, prec);
if (i == 0) {
- seq_puts(p, " ");
+ seq_printf(p, "%*s", prec + 8, "");
for_each_online_cpu(j)
- seq_printf(p, "CPU%d ",j);
+ seq_printf(p, "CPU%-8d", j);
seq_putc(p, '\n');
}
- if (i < sh_mv.mv_nr_irqs) {
- spin_lock_irqsave(&irq_desc[i].lock, flags);
- action = irq_desc[i].action;
- if (!action)
- goto unlock;
- seq_printf(p, "%3d: ",i);
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
- seq_printf(p, " %14s", irq_desc[i].chip->name);
- seq_printf(p, "-%-8s", irq_desc[i].name);
- seq_printf(p, " %s", action->name);
+ desc = irq_to_desc(i);
+ if (!desc)
+ return 0;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ for_each_online_cpu(j)
+ any_count |= kstat_irqs_cpu(i, j);
+ action = desc->action;
+ if (!action && !any_count)
+ goto out;
+
+ seq_printf(p, "%*d: ", prec, i);
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+ seq_printf(p, " %14s", desc->chip->name);
+ seq_printf(p, "-%-8s", desc->name);
- for (action=action->next; action; action = action->next)
+ if (action) {
+ seq_printf(p, " %s", action->name);
+ while ((action = action->next) != NULL)
seq_printf(p, ", %s", action->name);
- seq_putc(p, '\n');
-unlock:
- spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == sh_mv.mv_nr_irqs)
- seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count));
+ }
+ seq_putc(p, '\n');
+out:
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
#endif
irq_ctx_init(smp_processor_id());
}
+
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+ nr_irqs = sh_mv.mv_nr_irqs;
+ return 0;
+}
+#endif
/* Calculate the new address for after a step */
static short *get_step_address(struct pt_regs *linux_regs)
{
- opcode_t op = __raw_readw(linux_regs->pc);
+ insn_size_t op = __raw_readw(linux_regs->pc);
long addr;
/* BT */
*/
static unsigned long stepped_address;
-static opcode_t stepped_opcode;
+static insn_size_t stepped_opcode;
static void do_single_step(struct pt_regs *linux_regs)
{
--- /dev/null
+/*
+ * Dummy local timer
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * cloned from:
+ *
+ * linux/arch/arm/mach-realview/localtimer.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+
+static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
+
+/*
+ * Used on SMP for either the local timer or SMP_MSG_TIMER
+ */
+void local_timer_interrupt(void)
+{
+ struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
+
+ clk->event_handler(clk);
+}
+
+static void dummy_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+}
+
+void __cpuinit local_timer_setup(unsigned int cpu)
+{
+ struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
+
+ clk->name = "dummy_timer";
+ clk->features = CLOCK_EVT_FEAT_DUMMY;
+ clk->rating = 200;
+ clk->mult = 1;
+ clk->set_mode = dummy_timer_set_mode;
+ clk->broadcast = smp_timer_broadcast;
+ clk->cpumask = cpumask_of(cpu);
+
+ clockevents_register_device(clk);
+}
mv_set(ioport_map);
mv_set(ioport_unmap);
mv_set(irq_demux);
+ mv_set(mode_pins);
if (!sh_mv.mv_nr_irqs)
sh_mv.mv_nr_irqs = NR_IRQS;
* SHmedia, the LSB of the symbol needs to be asserted
* for the CPU to be in SHmedia mode when it starts executing
* the branch target. */
- relocation |= (sym->st_other & 4);
+ relocation |= !!(sym->st_other & 4);
#endif
switch (ELF32_R_TYPE(rel[i].r_info)) {
if (current_cpu_data.type == CPU_SH7729 ||
current_cpu_data.type == CPU_SH7710 ||
- current_cpu_data.type == CPU_SH7712) {
+ current_cpu_data.type == CPU_SH7712 ||
+ current_cpu_data.type == CPU_SH7203){
ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
} else {
#else
ctrl_outw(0, UBC_BBRA);
ctrl_outw(0, UBC_BBRB);
+ ctrl_outl(0, UBC_BRCR);
#endif
current->thread.ubc_pc = 0;
ubc_usercnt -= 1;
[(addr - (long)&dummy->fpu) >> 2];
} else if (addr == (long) &dummy->u_fpvalid)
tmp = !!tsk_used_math(child);
+ else if (addr == PT_TEXT_ADDR)
+ tmp = child->mm->start_code;
+ else if (addr == PT_DATA_ADDR)
+ tmp = child->mm->start_data;
+ else if (addr == PT_TEXT_END_ADDR)
+ tmp = child->mm->end_code;
+ else if (addr == PT_TEXT_LEN)
+ tmp = child->mm->end_code - child->mm->start_code;
else
tmp = 0;
ret = put_user(tmp, datap);
#include <linux/mmzone.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/platform_device.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
&crash_size, &crash_base);
if (ret == 0 && crash_size) {
if (crash_base <= 0) {
- vp = alloc_bootmem_nopanic(crash_size);
+ vp = alloc_bootmem_nopanic(crash_size);
if (!vp) {
printk(KERN_INFO "crashkernel allocation "
"failed\n");
{}
#endif
-#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
void __cpuinit calibrate_delay(void)
{
struct clk *clk = clk_get(NULL, "cpu_clk");
(loops_per_jiffy/(5000/HZ)) % 100,
loops_per_jiffy);
}
-#endif
void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn)
early_param("elfcorehdr", parse_elfcorehdr);
#endif
+void __init __attribute__ ((weak)) plat_early_device_setup(void)
+{
+}
+
void __init setup_arch(char **cmdline_p)
{
enable_mmu();
parse_early_param();
+ plat_early_device_setup();
+
sh_mv_setup();
/*
#endif
}
+/* processor boot mode configuration */
+int generic_mode_pins(void)
+{
+ pr_warning("generic_mode_pins(): missing mode pin configuration\n");
+ return 0;
+}
+
+int test_mode_pin(int pin)
+{
+ return sh_mv.mv_mode_pins() & (1 << pin);
+}
+
static const char *cpu_name[] = {
[CPU_SH7201] = "SH7201",
[CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
- [CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
+ [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724",
+ [CPU_SH_NONE] = "Unknown"
};
const char *get_cpu_subtype(struct sh_cpuinfo *c)
#include <asm/ftrace.h>
extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-extern struct hw_interrupt_type no_irq_type;
/* platform dependent support */
EXPORT_SYMBOL(dump_fpu);
EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(irq_desc);
-EXPORT_SYMBOL(no_irq_type);
-
EXPORT_SYMBOL(strlen);
/* PCI exports */
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memmove);
EXPORT_SYMBOL(__copy_user);
-
-#ifdef CONFIG_MMU
-EXPORT_SYMBOL(get_vm_area);
-#endif
-
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__sdivsi3_1);
+DECLARE_EXPORT(__sdivsi3_2);
DECLARE_EXPORT(__udivsi3);
DECLARE_EXPORT(__div_table);
--- /dev/null
+/*
+ * arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002 - 2009 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/clockchips.h>
+#include <linux/platform_device.h>
+#include <linux/smp.h>
+#include <linux/rtc.h>
+#include <asm/clock.h>
+#include <asm/rtc.h>
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+#ifdef CONFIG_GENERIC_CMOS_UPDATE
+unsigned long read_persistent_clock(void)
+{
+ struct timespec tv;
+ rtc_sh_get_time(&tv);
+ return tv.tv_sec;
+}
+
+int update_persistent_clock(struct timespec now)
+{
+ return rtc_sh_set_time(now.tv_sec);
+}
+#endif
+
+unsigned int get_rtc_time(struct rtc_time *tm)
+{
+ if (rtc_sh_get_time != null_rtc_get_time) {
+ struct timespec tv;
+
+ rtc_sh_get_time(&tv);
+ rtc_time_to_tm(tv.tv_sec, tm);
+ }
+
+ return RTC_24H;
+}
+EXPORT_SYMBOL(get_rtc_time);
+
+int set_rtc_time(struct rtc_time *tm)
+{
+ unsigned long secs;
+
+ rtc_tm_to_time(tm, &secs);
+ return rtc_sh_set_time(secs);
+}
+EXPORT_SYMBOL(set_rtc_time);
+
+static int __init rtc_generic_init(void)
+{
+ struct platform_device *pdev;
+
+ if (rtc_sh_get_time == null_rtc_get_time)
+ return -ENODEV;
+
+ pdev = platform_device_register_simple("rtc-generic", -1, NULL, 0);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ return 0;
+}
+module_init(rtc_generic_init);
+
+void (*board_time_init)(void);
+
+unsigned long long sched_clock(void)
+{
+ return (jiffies_64 - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ);
+}
+
+static void __init sh_late_time_init(void)
+{
+ /*
+ * Make sure all compiled-in early timers register themselves.
+ * Run probe() for one "earlytimer" device.
+ */
+ early_platform_driver_register_all("earlytimer");
+ early_platform_driver_probe("earlytimer", 1, 0);
+}
+
+void __init time_init(void)
+{
+ if (board_time_init)
+ board_time_init();
+
+ clk_init();
+
+ rtc_sh_get_time(&xtime);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+ local_timer_setup(smp_processor_id());
+#endif
+
+ late_time_init = sh_late_time_init;
+}
+++ /dev/null
-/*
- * arch/sh/kernel/time_32.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002 - 2008 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- *
- * Some code taken from i386 version.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <linux/mc146818rtc.h> /* for rtc_lock */
-#include <linux/smp.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/timer.h>
-#include <asm/kgdb.h>
-
-struct sys_timer *sys_timer;
-
-/* Move this somewhere more sensible.. */
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
- tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
- return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- /*
- * Turn off IRQs when grabbing xtime_lock, so that
- * the sys_timer get_offset code doesn't have to handle it.
- */
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = get_timer_offset();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / NSEC_PER_USEC;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= get_timer_offset() * NSEC_PER_USEC;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
-
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * handle_timer_tick() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-void handle_timer_tick(void)
-{
- if (current->pid)
- profile_tick(CPU_PROFILING);
-
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_seqlock(&xtime_lock);
- do_timer(1);
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_sh_set_time(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* do it again in 60s */
- last_rtc_update = xtime.tv_sec - 600;
- }
- write_sequnlock(&xtime_lock);
-
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-
-#ifdef CONFIG_PM
-int timer_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
- sys_timer->ops->stop();
-
- return 0;
-}
-
-int timer_resume(struct sys_device *dev)
-{
- struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
- sys_timer->ops->start();
-
- return 0;
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct sysdev_class timer_sysclass = {
- .name = "timer",
- .suspend = timer_suspend,
- .resume = timer_resume,
-};
-
-static int __init timer_init_sysfs(void)
-{
- int ret;
-
- if (!sys_timer)
- return 0;
-
- ret = sysdev_class_register(&timer_sysclass);
- if (ret != 0)
- return ret;
-
- sys_timer->dev.cls = &timer_sysclass;
- return sysdev_register(&sys_timer->dev);
-}
-device_initcall(timer_init_sysfs);
-
-void (*board_time_init)(void);
-
-struct clocksource clocksource_sh = {
- .name = "SuperH",
-};
-
-#ifdef CONFIG_GENERIC_TIME
-unsigned long long sched_clock(void)
-{
- unsigned long long cycles;
-
- /* jiffies based sched_clock if no clocksource is installed */
- if (!clocksource_sh.rating)
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
-
- cycles = clocksource_sh.read(&clocksource_sh);
- return cyc2ns(&clocksource_sh, cycles);
-}
-#endif
-
-void __init time_init(void)
-{
- if (board_time_init)
- board_time_init();
-
- clk_init();
-
- rtc_sh_get_time(&xtime);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- local_timer_setup(smp_processor_id());
-#endif
-
- /*
- * Find the timer to use as the system timer, it will be
- * initialized for us.
- */
- sys_timer = get_sys_timer();
- if (unlikely(!sys_timer))
- panic("System timer missing.\n");
-
- printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
-}
+++ /dev/null
-/*
- * arch/sh/kernel/time_64.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- *
- * Original TMU/RTC code taken from sh version.
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Some code taken from i386 version.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <cpu/registers.h> /* required by inline __asm__ stmt. */
-#include <cpu/irq.h>
-#include <asm/addrspace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/delay.h>
-#include <asm/clock.h>
-
-#define TMU_TOCR_INIT 0x00
-#define TMU0_TCR_INIT 0x0020
-#define TMU_TSTR_INIT 1
-#define TMU_TSTR_OFF 0
-
-/* Real Time Clock */
-#define RTC_BLOCK_OFF 0x01040000
-#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
-#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */
-#define RTC_RCR1 (rtc_base + 0x38)
-
-/* Time Management Unit */
-#define TMU_BLOCK_OFF 0x01020000
-#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0)
-#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1)
-#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2)
-
-#define TMU_TOCR tmu_base+0x0 /* Byte access */
-#define TMU_TSTR tmu_base+0x4 /* Byte access */
-
-#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */
-#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */
-#define TMU0_TCR TMU0_BASE+0x8 /* Word access */
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-static unsigned long tmu_base, rtc_base;
-unsigned long cprc_base;
-
-/* Variables to allow interpolation of time of day to resolution better than a
- * jiffy. */
-
-/* This is effectively protected by xtime_lock */
-static unsigned long ctc_last_interrupt;
-static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
-
-#define CTC_JIFFY_SCALE_SHIFT 40
-
-/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
-static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
-
-/* Estimate number of microseconds that have elapsed since the last timer tick,
- by scaling the delta that has occurred in the CTC register.
-
- WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
- the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
- in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm
- probably needs to use TMU.TCNT0 instead. This will work even if the CPU is
- sleeping, though will be coarser.
-
- FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
- is running or if the freq or tick arguments of adjtimex are modified after
- we have calibrated the scaling factor? This will result in either a jump at
- the end of a tick period, or a wrap backwards at the start of the next one,
- if the application is reading the time of day often enough. I think we
- ought to do better than this. For this reason, usecs_per_jiffy is left
- separated out in the calculation below. This allows some future hook into
- the adjtime-related stuff in kernel/timer.c to remove this hazard.
-
-*/
-
-static unsigned long usecs_since_tick(void)
-{
- unsigned long long current_ctc;
- long ctc_ticks_since_interrupt;
- unsigned long long ull_ctc_ticks_since_interrupt;
- unsigned long result;
-
- unsigned long long mul1_out;
- unsigned long long mul1_out_high;
- unsigned long long mul2_out_low, mul2_out_high;
-
- /* Read CTC register */
- asm ("getcon cr62, %0" : "=r" (current_ctc));
- /* Note, the CTC counts down on each CPU clock, not up.
- Note(2), use long type to get correct wraparound arithmetic when
- the counter crosses zero. */
- ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
- ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
-
- /* Inline assembly to do 32x32x32->64 multiplier */
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul1_out) :
- "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
-
- mul1_out_high = mul1_out >> 32;
-
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul2_out_low) :
- "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
-
-#if 1
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul2_out_high) :
- "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
-#endif
-
- result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
-
- return result;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = usecs_since_tick();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / 1000;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * usecs_since_tick();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
-
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
- tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
- return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static inline void do_timer_interrupt(void)
-{
- unsigned long long current_ctc;
-
- if (current->pid)
- profile_tick(CPU_PROFILING);
-
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_seqlock(&xtime_lock);
- asm ("getcon cr62, %0" : "=r" (current_ctc));
- ctc_last_interrupt = (unsigned long) current_ctc;
-
- do_timer(1);
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_sh_set_time(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* do it again in 60 s */
- last_rtc_update = xtime.tv_sec - 600;
- }
- write_sequnlock(&xtime_lock);
-
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- unsigned long timer_status;
-
- /* Clear UNF bit */
- timer_status = ctrl_inw(TMU0_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU0_TCR);
-
- do_timer_interrupt();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED,
- .name = "timer",
-};
-
-void __init time_init(void)
-{
- unsigned long interval;
- struct clk *clk;
-
- tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
- if (!tmu_base) {
- panic("Unable to remap TMU\n");
- }
-
- rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
- if (!rtc_base) {
- panic("Unable to remap RTC\n");
- }
-
- clk = clk_get(NULL, "cpu_clk");
- scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) /
- (unsigned long long)(clk_get_rate(clk) / HZ));
-
- rtc_sh_get_time(&xtime);
-
- setup_irq(TIMER_IRQ, &irq0);
-
- clk = clk_get(NULL, "module_clk");
- interval = (clk_get_rate(clk)/(HZ*4));
-
- printk("Interval = %ld\n", interval);
-
- /* Start TMU0 */
- ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
- ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
- ctrl_outl(interval, TMU0_TCOR);
- ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-}
-
-static struct resource rtc_resources[] = {
- [0] = {
- /* RTC base, filled in by rtc_init */
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = IRQ_PRI,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = IRQ_CUI,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = IRQ_ATI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static int __init rtc_init(void)
-{
- rtc_resources[0].start = rtc_base;
- rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1;
-
- return platform_device_register(&rtc_device);
-}
-device_initcall(rtc_init);
+++ /dev/null
-#
-# Makefile for the various Linux/SuperH timers
-#
-
-obj-y := timer.o
-
-obj-$(CONFIG_SH_TMU) += timer-tmu.o
-obj-$(CONFIG_SH_MTU2) += timer-mtu2.o
-obj-$(CONFIG_SH_CMT) += timer-cmt.o
-
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += timer-broadcast.o
+++ /dev/null
-/*
- * Dummy local timer
- *
- * Copyright (C) 2008 Paul Mundt
- *
- * cloned from:
- *
- * linux/arch/arm/mach-realview/localtimer.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
-#include <linux/clockchips.h>
-#include <linux/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or SMP_MSG_TIMER
- */
-void local_timer_interrupt(void)
-{
- struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
- clk->event_handler(clk);
-}
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(unsigned int cpu)
-{
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
- clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 200;
- clk->mult = 1;
- clk->set_mode = dummy_timer_set_mode;
- clk->broadcast = smp_timer_broadcast;
- clk->cpumask = cpumask_of(cpu);
-
- clockevents_register_device(clk);
-}
+++ /dev/null
-/*
- * arch/sh/kernel/timers/timer-cmt.c - CMT Timer Support
- *
- * Copyright (C) 2005 Yoshinori Sato
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <asm/timer.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7619)
-#define CMT_CMSTR 0xf84a0070
-#define CMT_CMCSR_0 0xf84a0072
-#define CMT_CMCNT_0 0xf84a0074
-#define CMT_CMCOR_0 0xf84a0076
-#define CMT_CMCSR_1 0xf84a0078
-#define CMT_CMCNT_1 0xf84a007a
-#define CMT_CMCOR_1 0xf84a007c
-
-#define STBCR3 0xf80a0000
-#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0)
-#define CMT_CMCSR_INIT 0x0040
-#define CMT_CMCSR_CALIB 0x0000
-#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
- defined(CONFIG_CPU_SUBTYPE_SH7206) || \
- defined(CONFIG_CPU_SUBTYPE_SH7263)
-#define CMT_CMSTR 0xfffec000
-#define CMT_CMCSR_0 0xfffec002
-#define CMT_CMCNT_0 0xfffec004
-#define CMT_CMCOR_0 0xfffec006
-
-#define STBCR4 0xfffe040c
-#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR4) & ~0x04, STBCR4); } while(0)
-#define CMT_CMCSR_INIT 0x0040
-#define CMT_CMCSR_CALIB 0x0000
-#else
-#error "Unknown CPU SUBTYPE"
-#endif
-
-static unsigned long cmt_timer_get_offset(void)
-{
- int count;
- static unsigned short count_p = 0xffff; /* for the first call after boot */
- static unsigned long jiffies_p = 0;
-
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
-
- /* timer count may underflow right here */
- count = ctrl_inw(CMT_CMCOR_0);
- count -= ctrl_inw(CMT_CMCNT_0);
-
- jiffies_t = jiffies;
-
- /*
- * avoiding timer inconsistencies (they are rare, but they happen)...
- * there is one kind of problem that must be avoided here:
- * 1. the timer counter underflows
- */
-
- if (jiffies_t == jiffies_p) {
- if (count > count_p) {
- /* the nutcase */
- if (ctrl_inw(CMT_CMCSR_0) & 0x80) { /* Check CMF bit */
- count -= LATCH;
- } else {
- printk("%s (): hardware timer problem?\n",
- __func__);
- }
- }
- } else
- jiffies_p = jiffies_t;
-
- count_p = count;
-
- count = ((LATCH-1) - count) * TICK_SIZE;
- count = (count + LATCH/2) / LATCH;
-
- return count;
-}
-
-static irqreturn_t cmt_timer_interrupt(int irq, void *dev_id)
-{
- unsigned long timer_status;
-
- /* Clear CMF bit */
- timer_status = ctrl_inw(CMT_CMCSR_0);
- timer_status &= ~0x80;
- ctrl_outw(timer_status, CMT_CMCSR_0);
-
- handle_timer_tick();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction cmt_irq = {
- .name = "timer",
- .handler = cmt_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static void cmt_clk_init(struct clk *clk)
-{
- u8 divisor = CMT_CMCSR_INIT & 0x3;
- ctrl_inw(CMT_CMCSR_0);
- ctrl_outw(CMT_CMCSR_INIT, CMT_CMCSR_0);
- clk->parent = clk_get(NULL, "module_clk");
- clk->rate = clk->parent->rate / (8 << (divisor << 1));
-}
-
-static void cmt_clk_recalc(struct clk *clk)
-{
- u8 divisor = ctrl_inw(CMT_CMCSR_0) & 0x3;
- clk->rate = clk->parent->rate / (8 << (divisor << 1));
-}
-
-static struct clk_ops cmt_clk_ops = {
- .init = cmt_clk_init,
- .recalc = cmt_clk_recalc,
-};
-
-static struct clk cmt0_clk = {
- .name = "cmt0_clk",
- .ops = &cmt_clk_ops,
-};
-
-static int cmt_timer_start(void)
-{
- ctrl_outw(ctrl_inw(CMT_CMSTR) | 0x01, CMT_CMSTR);
- return 0;
-}
-
-static int cmt_timer_stop(void)
-{
- ctrl_outw(ctrl_inw(CMT_CMSTR) & ~0x01, CMT_CMSTR);
- return 0;
-}
-
-static int cmt_timer_init(void)
-{
- unsigned long interval;
-
- cmt_clock_enable();
-
- setup_irq(CONFIG_SH_TIMER_IRQ, &cmt_irq);
-
- cmt0_clk.parent = clk_get(NULL, "module_clk");
-
- cmt_timer_stop();
-
- interval = cmt0_clk.parent->rate / 8 / HZ;
- printk(KERN_INFO "Interval = %ld\n", interval);
-
- ctrl_outw(interval, CMT_CMCOR_0);
-
- clk_register(&cmt0_clk);
- clk_enable(&cmt0_clk);
-
- cmt_timer_start();
-
- return 0;
-}
-
-static struct sys_timer_ops cmt_timer_ops = {
- .init = cmt_timer_init,
- .start = cmt_timer_start,
- .stop = cmt_timer_stop,
-#ifndef CONFIG_GENERIC_TIME
- .get_offset = cmt_timer_get_offset,
-#endif
-};
-
-struct sys_timer cmt_timer = {
- .name = "cmt",
- .ops = &cmt_timer_ops,
-};
+++ /dev/null
-/*
- * arch/sh/kernel/timers/timer-mtu2.c - MTU2 Timer Support
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * Based off of arch/sh/kernel/timers/timer-tmu.c
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <asm/timer.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-/*
- * We use channel 1 for our lowly system timer. Channel 2 would be the other
- * likely candidate, but we leave it alone as it has higher divisors that
- * would be of more use to other more interesting applications.
- *
- * TODO: Presently we only implement a 16-bit single-channel system timer.
- * However, we can implement channel cascade if we go the overflow route and
- * get away with using 2 MTU2 channels as a 32-bit timer.
- */
-#define MTU2_TSTR 0xfffe4280
-#define MTU2_TCR_1 0xfffe4380
-#define MTU2_TMDR_1 0xfffe4381
-#define MTU2_TIOR_1 0xfffe4382
-#define MTU2_TIER_1 0xfffe4384
-#define MTU2_TSR_1 0xfffe4385
-#define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \
- defined(CONFIG_CPU_SUBTYPE_SH7203)
-#define MTU2_TGRA_1 0xfffe4388
-#else
-#define MTU2_TGRA_1 0xfffe438a
-#endif
-
-#define STBCR3 0xfffe0408
-
-#define MTU2_TSTR_CST1 (1 << 1) /* Counter Start 1 */
-
-#define MTU2_TSR_TGFA (1 << 0) /* GRA compare match */
-
-#define MTU2_TIER_TGIEA (1 << 0) /* GRA compare match interrupt enable */
-
-#define MTU2_TCR_INIT 0x22
-
-#define MTU2_TCR_CALIB 0x00
-
-static unsigned long mtu2_timer_get_offset(void)
-{
- int count;
- static int count_p = 0x7fff; /* for the first call after boot */
- static unsigned long jiffies_p = 0;
-
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
-
- /* timer count may underflow right here */
- count = ctrl_inw(MTU2_TCNT_1); /* read the latched count */
-
- jiffies_t = jiffies;
-
- /*
- * avoiding timer inconsistencies (they are rare, but they happen)...
- * there is one kind of problem that must be avoided here:
- * 1. the timer counter underflows
- */
-
- if (jiffies_t == jiffies_p) {
- if (count > count_p) {
- if (ctrl_inb(MTU2_TSR_1) & MTU2_TSR_TGFA) {
- count -= LATCH;
- } else {
- printk("%s (): hardware timer problem?\n",
- __func__);
- }
- }
- } else
- jiffies_p = jiffies_t;
-
- count_p = count;
-
- count = ((LATCH-1) - count) * TICK_SIZE;
- count = (count + LATCH/2) / LATCH;
-
- return count;
-}
-
-static irqreturn_t mtu2_timer_interrupt(int irq, void *dev_id)
-{
- unsigned long timer_status;
-
- /* Clear TGFA bit */
- timer_status = ctrl_inb(MTU2_TSR_1);
- timer_status &= ~MTU2_TSR_TGFA;
- ctrl_outb(timer_status, MTU2_TSR_1);
-
- /* Do timer tick */
- handle_timer_tick();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction mtu2_irq = {
- .name = "timer",
- .handler = mtu2_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static unsigned int divisors[] = { 1, 4, 16, 64, 1, 1, 256 };
-
-static void mtu2_clk_init(struct clk *clk)
-{
- u8 idx = MTU2_TCR_INIT & 0x7;
-
- clk->rate = clk->parent->rate / divisors[idx];
- /* Start TCNT counting */
- ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
-
-}
-
-static void mtu2_clk_recalc(struct clk *clk)
-{
- u8 idx = ctrl_inb(MTU2_TCR_1) & 0x7;
- clk->rate = clk->parent->rate / divisors[idx];
-}
-
-static struct clk_ops mtu2_clk_ops = {
- .init = mtu2_clk_init,
- .recalc = mtu2_clk_recalc,
-};
-
-static struct clk mtu2_clk1 = {
- .name = "mtu2_clk1",
- .ops = &mtu2_clk_ops,
-};
-
-static int mtu2_timer_start(void)
-{
- ctrl_outb(ctrl_inb(MTU2_TSTR) | MTU2_TSTR_CST1, MTU2_TSTR);
- return 0;
-}
-
-static int mtu2_timer_stop(void)
-{
- ctrl_outb(ctrl_inb(MTU2_TSTR) & ~MTU2_TSTR_CST1, MTU2_TSTR);
- return 0;
-}
-
-static int mtu2_timer_init(void)
-{
- unsigned long interval;
-
- setup_irq(CONFIG_SH_TIMER_IRQ, &mtu2_irq);
-
- mtu2_clk1.parent = clk_get(NULL, "module_clk");
-
- ctrl_outb(ctrl_inb(STBCR3) & (~0x20), STBCR3);
-
- /* Normal operation */
- ctrl_outb(0, MTU2_TMDR_1);
- ctrl_outb(MTU2_TCR_INIT, MTU2_TCR_1);
- ctrl_outb(0x01, MTU2_TIOR_1);
-
- /* Enable underflow interrupt */
- ctrl_outb(ctrl_inb(MTU2_TIER_1) | MTU2_TIER_TGIEA, MTU2_TIER_1);
-
- interval = CONFIG_SH_PCLK_FREQ / 16 / HZ;
- printk(KERN_INFO "Interval = %ld\n", interval);
-
- ctrl_outw(interval, MTU2_TGRA_1);
- ctrl_outw(0, MTU2_TCNT_1);
-
- clk_register(&mtu2_clk1);
- clk_enable(&mtu2_clk1);
-
- return 0;
-}
-
-struct sys_timer_ops mtu2_timer_ops = {
- .init = mtu2_timer_init,
- .start = mtu2_timer_start,
- .stop = mtu2_timer_stop,
-#ifndef CONFIG_GENERIC_TIME
- .get_offset = mtu2_timer_get_offset,
-#endif
-};
-
-struct sys_timer mtu2_timer = {
- .name = "mtu2",
- .ops = &mtu2_timer_ops,
-};
+++ /dev/null
-/*
- * arch/sh/kernel/timers/timer-tmu.c - TMU Timer Support
- *
- * Copyright (C) 2005 - 2007 Paul Mundt
- *
- * TMU handling code hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/seqlock.h>
-#include <linux/clockchips.h>
-#include <asm/timer.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/clock.h>
-
-#define TMU_TOCR_INIT 0x00
-#define TMU_TCR_INIT 0x0020
-
-#define TMU0 (0)
-#define TMU1 (1)
-
-static inline void _tmu_start(int tmu_num)
-{
- ctrl_outb(ctrl_inb(TMU_012_TSTR) | (0x1<<tmu_num), TMU_012_TSTR);
-}
-
-static inline void _tmu_set_irq(int tmu_num, int enabled)
-{
- register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
- ctrl_outw( (enabled ? ctrl_inw(tmu_tcr) | (1<<5) : ctrl_inw(tmu_tcr) & ~(1<<5)), tmu_tcr);
-}
-
-static inline void _tmu_stop(int tmu_num)
-{
- ctrl_outb(ctrl_inb(TMU_012_TSTR) & ~(0x1<<tmu_num), TMU_012_TSTR);
-}
-
-static inline void _tmu_clear_status(int tmu_num)
-{
- register unsigned long tmu_tcr = TMU0_TCR + (0xc*tmu_num);
- /* Clear UNF bit */
- ctrl_outw(ctrl_inw(tmu_tcr) & ~0x100, tmu_tcr);
-}
-
-static inline unsigned long _tmu_read(int tmu_num)
-{
- return ctrl_inl(TMU0_TCNT+0xC*tmu_num);
-}
-
-static int tmu_timer_start(void)
-{
- _tmu_start(TMU0);
- _tmu_start(TMU1);
- _tmu_set_irq(TMU0,1);
- return 0;
-}
-
-static int tmu_timer_stop(void)
-{
- _tmu_stop(TMU0);
- _tmu_stop(TMU1);
- _tmu_clear_status(TMU0);
- return 0;
-}
-
-/*
- * also when the module_clk is scaled the TMU1
- * will show the same frequency
- */
-static int tmus_are_scaled;
-
-static cycle_t tmu_timer_read(struct clocksource *cs)
-{
- return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
-}
-
-
-static unsigned long tmu_latest_interval[3];
-static void tmu_timer_set_interval(int tmu_num, unsigned long interval, unsigned int reload)
-{
- unsigned long tmu_tcnt = TMU0_TCNT + tmu_num*0xC;
- unsigned long tmu_tcor = TMU0_TCOR + tmu_num*0xC;
-
- _tmu_stop(tmu_num);
-
- ctrl_outl(interval, tmu_tcnt);
- tmu_latest_interval[tmu_num] = interval;
-
- /*
- * TCNT reloads from TCOR on underflow, clear it if we don't
- * intend to auto-reload
- */
- ctrl_outl( reload ? interval : 0 , tmu_tcor);
-
- _tmu_start(tmu_num);
-}
-
-static int tmu_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- tmu_timer_set_interval(TMU0,cycles, evt->mode == CLOCK_EVT_MODE_PERIODIC);
- _tmu_set_irq(TMU0,1);
- return 0;
-}
-
-static void tmu_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- ctrl_outl(tmu_latest_interval[TMU0], TMU0_TCOR);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- ctrl_outl(0, TMU0_TCOR);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static struct clock_event_device tmu0_clockevent = {
- .name = "tmu0",
- .shift = 32,
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = tmu_set_mode,
- .set_next_event = tmu_set_next_event,
-};
-
-static irqreturn_t tmu_timer_interrupt(int irq, void *dummy)
-{
- struct clock_event_device *evt = &tmu0_clockevent;
- _tmu_clear_status(TMU0);
- _tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT);
-
- switch (tmu0_clockevent.mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_PERIODIC:
- evt->event_handler(evt);
- break;
- default:
- break;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction tmu0_irq = {
- .name = "periodic/oneshot timer",
- .handler = tmu_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-static void __init tmu_clk_init(struct clk *clk)
-{
- u8 divisor = TMU_TCR_INIT & 0x7;
- int tmu_num = clk->name[3]-'0';
- ctrl_outw(TMU_TCR_INIT, TMU0_TCR+(tmu_num*0xC));
- clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1));
-}
-
-static void tmu_clk_recalc(struct clk *clk)
-{
- int tmu_num = clk->name[3]-'0';
- unsigned long prev_rate = clk_get_rate(clk);
- unsigned long flags;
- u8 divisor = ctrl_inw(TMU0_TCR+tmu_num*0xC) & 0x7;
- clk->rate = clk_get_rate(clk->parent) / (4 << (divisor << 1));
-
- if(prev_rate==clk_get_rate(clk))
- return;
-
- if(tmu_num)
- return; /* No more work on TMU1 */
-
- local_irq_save(flags);
- tmus_are_scaled = (prev_rate > clk->rate);
-
- _tmu_stop(TMU0);
-
- tmu0_clockevent.mult = div_sc(clk->rate, NSEC_PER_SEC,
- tmu0_clockevent.shift);
- tmu0_clockevent.max_delta_ns =
- clockevent_delta2ns(-1, &tmu0_clockevent);
- tmu0_clockevent.min_delta_ns =
- clockevent_delta2ns(1, &tmu0_clockevent);
-
- if (tmus_are_scaled)
- tmu_latest_interval[TMU0] >>= 1;
- else
- tmu_latest_interval[TMU0] <<= 1;
-
- tmu_timer_set_interval(TMU0,
- tmu_latest_interval[TMU0],
- tmu0_clockevent.mode == CLOCK_EVT_MODE_PERIODIC);
-
- _tmu_start(TMU0);
-
- local_irq_restore(flags);
-}
-
-static struct clk_ops tmu_clk_ops = {
- .init = tmu_clk_init,
- .recalc = tmu_clk_recalc,
-};
-
-static struct clk tmu0_clk = {
- .name = "tmu0_clk",
- .ops = &tmu_clk_ops,
-};
-
-static struct clk tmu1_clk = {
- .name = "tmu1_clk",
- .ops = &tmu_clk_ops,
-};
-
-static int tmu_timer_init(void)
-{
- unsigned long interval;
- unsigned long frequency;
-
- setup_irq(CONFIG_SH_TIMER_IRQ, &tmu0_irq);
-
- tmu0_clk.parent = clk_get(NULL, "module_clk");
- tmu1_clk.parent = clk_get(NULL, "module_clk");
-
- tmu_timer_stop();
-
-#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7721) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7785) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7786) && \
- !defined(CONFIG_CPU_SUBTYPE_SHX3)
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
-
- clk_register(&tmu0_clk);
- clk_register(&tmu1_clk);
- clk_enable(&tmu0_clk);
- clk_enable(&tmu1_clk);
-
- frequency = clk_get_rate(&tmu0_clk);
- interval = (frequency + HZ / 2) / HZ;
-
- tmu_timer_set_interval(TMU0,interval, 1);
- tmu_timer_set_interval(TMU1,~0,1);
-
- _tmu_start(TMU1);
-
- clocksource_sh.rating = 200;
- clocksource_sh.mask = CLOCKSOURCE_MASK(32);
- clocksource_sh.read = tmu_timer_read;
- clocksource_sh.shift = 10;
- clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk),
- clocksource_sh.shift);
- clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS;
- clocksource_register(&clocksource_sh);
-
- tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC,
- tmu0_clockevent.shift);
- tmu0_clockevent.max_delta_ns =
- clockevent_delta2ns(-1, &tmu0_clockevent);
- tmu0_clockevent.min_delta_ns =
- clockevent_delta2ns(1, &tmu0_clockevent);
-
- tmu0_clockevent.cpumask = cpumask_of(0);
- tmu0_clockevent.rating = 100;
-
- clockevents_register_device(&tmu0_clockevent);
-
- return 0;
-}
-
-static struct sys_timer_ops tmu_timer_ops = {
- .init = tmu_timer_init,
- .start = tmu_timer_start,
- .stop = tmu_timer_stop,
-};
-
-struct sys_timer tmu_timer = {
- .name = "tmu",
- .ops = &tmu_timer_ops,
-};
+++ /dev/null
-/*
- * arch/sh/kernel/timers/timer.c - Common timer code
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/string.h>
-#include <asm/timer.h>
-
-static struct sys_timer *sys_timers[] = {
-#ifdef CONFIG_SH_TMU
- &tmu_timer,
-#endif
-#ifdef CONFIG_SH_MTU2
- &mtu2_timer,
-#endif
-#ifdef CONFIG_SH_CMT
- &cmt_timer,
-#endif
- NULL,
-};
-
-static char timer_override[10];
-static int __init timer_setup(char *str)
-{
- if (str)
- strlcpy(timer_override, str, sizeof(timer_override));
- return 1;
-}
-__setup("timer=", timer_setup);
-
-struct sys_timer *get_sys_timer(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sys_timers); i++) {
- struct sys_timer *t = sys_timers[i];
-
- if (unlikely(!t))
- break;
- if (unlikely(timer_override[0]))
- if ((strcmp(timer_override, t->name) != 0))
- continue;
- if (likely(t->ops->init() == 0))
- return t;
- }
-
- return NULL;
-}
int is_valid_bugaddr(unsigned long addr)
{
- unsigned short opcode;
+ insn_size_t opcode;
if (addr < PAGE_OFFSET)
return 0;
- if (probe_kernel_address((u16 *)addr, opcode))
+ if (probe_kernel_address((insn_size_t *)addr, opcode))
return 0;
return opcode == TRAPA_BUG_OPCODE;
#ifdef CONFIG_BUG
if (__kernel_text_address(instruction_pointer(regs))) {
- opcode_t insn = *(opcode_t *)instruction_pointer(regs);
+ insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
if (insn == TRAPA_BUG_OPCODE)
handle_BUG(regs);
}
# define TRAP_ILLEGAL_SLOT_INST 6
# define TRAP_ADDRESS_ERROR 9
# ifdef CONFIG_CPU_SH2A
+# define TRAP_UBC 12
# define TRAP_FPU_ERROR 13
# define TRAP_DIVZERO_ERROR 17
# define TRAP_DIVOVF_ERROR 18
* (if that instruction is in a branch delay slot)
* - return 0 if emulation okay, -EFAULT on existential error
*/
-static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs,
+static int handle_unaligned_ins(insn_size_t instruction, struct pt_regs *regs,
struct mem_access *ma)
{
int ret, index, count;
* - fetches the instruction from PC+2
*/
static inline int handle_delayslot(struct pt_regs *regs,
- opcode_t old_instruction,
+ insn_size_t old_instruction,
struct mem_access *ma)
{
- opcode_t instruction;
+ insn_size_t instruction;
void __user *addr = (void __user *)(regs->pc +
instruction_size(old_instruction));
static int handle_unaligned_notify_count = 10;
-int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
struct mem_access *ma)
{
u_int rm;
unsigned long error_code = 0;
mm_segment_t oldfs;
siginfo_t info;
- opcode_t instruction;
+ insn_size_t instruction;
int tmp;
/* Intentional ifdef */
#endif
#endif
+#ifdef TRAP_UBC
+ set_exception_table_vec(TRAP_UBC, break_point_trap);
+#endif
+
/* Setup VBR for boot cpu */
per_cpu_trap_init();
}
return -1;
}
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
/* Check accessible. For misaligned access in the kernel, assume the
address is always accessible (and if not, just fault when the
load/store gets done.) */
}
/* Do access_ok check later - it depends on whether it's a load or a store. */
}
-#endif
*address = addr;
return 0;
}
-/* Default value as for sh */
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
static int user_mode_unaligned_fixup_count = 10;
static int user_mode_unaligned_fixup_enable = 1;
-#endif
-
static int kernel_mode_unaligned_fixup_count = 32;
static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result)
}
destreg = (opcode >> 4) & 0x3f;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
if (user_mode(regs)) {
__u64 buffer;
width_shift, (unsigned long) regs->pc);
break;
}
- } else
-#endif
- {
+ } else {
/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
__u64 lo, hi;
}
srcreg = (opcode >> 4) & 0x3f;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
if (user_mode(regs)) {
__u64 buffer;
if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) {
return -1; /* fault */
}
- } else
-#endif
- {
+ } else {
/* kernel mode - we can take short cuts since if we fault, it's a genuine bug */
__u64 val = regs->regs[srcreg];
}
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
/* Never need to fix up misaligned FPU accesses within the kernel since that's a real
error. */
static int misaligned_fpu_load(struct pt_regs *regs,
return -1;
}
}
-#endif
static int misaligned_fixup(struct pt_regs *regs)
{
int error;
int major, minor;
-#if !defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
- /* Never fixup user mode misaligned accesses without this option enabled. */
- return -1;
-#else
- if (!user_mode_unaligned_fixup_enable) return -1;
-#endif
+ if (!user_mode_unaligned_fixup_enable)
+ return -1;
error = read_opcode(regs->pc, &opcode, user_mode(regs));
if (error < 0) {
major = (opcode >> 26) & 0x3f;
minor = (opcode >> 16) & 0xf;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) {
--user_mode_unaligned_fixup_count;
/* Only do 'count' worth of these reports, to remove a potential DoS against syslog */
printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n",
current->comm, task_pid_nr(current), (__u32)regs->pc, opcode);
- } else
-#endif
- if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
+ } else if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) {
--kernel_mode_unaligned_fixup_count;
if (in_interrupt()) {
printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n",
}
break;
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
case (0x94>>2): /* FLD.S */
error = misaligned_fpu_load(regs, opcode, 1, 2, 0);
break;
break;
}
break;
-#endif
default:
/* Fault */
.mode = 0644,
.proc_handler = &proc_dointvec
},
-#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "user_reports",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = &proc_dointvec},
-#endif
{}
};
-#ifdef CONFIG_SUPERH32
-# include "vmlinux_32.lds.S"
+/*
+ * ld script to make SuperH Linux kernel
+ * Written by Niibe Yutaka and Paul Mundt
+ */
+#ifdef CONFIG_SUPERH64
+#define LOAD_OFFSET CONFIG_PAGE_OFFSET
+OUTPUT_ARCH(sh:sh5)
#else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET 0
+OUTPUT_ARCH(sh)
#endif
+
+#include <asm/thread_info.h>
+#include <asm/cache.h>
+#include <asm-generic/vmlinux.lds.h>
+
+ENTRY(_start)
+SECTIONS
+{
+#ifdef CONFIG_PMB_FIXED
+ . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
+ CONFIG_ZERO_PAGE_OFFSET;
+#elif defined(CONFIG_32BIT)
+ . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
+#else
+ . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
+#endif
+
+ _text = .; /* Text and read-only data */
+
+ .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) {
+ *(.empty_zero_page)
+ } = 0
+
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ HEAD_TEXT
+ TEXT_TEXT
+
+#ifdef CONFIG_SUPERH64
+ *(.text64)
+ *(.text..SHmedia32)
+#endif
+
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ _etext = .; /* End of text section */
+ } = 0x0009
+
+ . = ALIGN(16); /* Exception table */
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ NOTES
+ RO_DATA(PAGE_SIZE)
+
+ /*
+ * Code which must be executed uncached and the associated data
+ */
+ . = ALIGN(PAGE_SIZE);
+ .uncached : AT(ADDR(.uncached) - LOAD_OFFSET) {
+ __uncached_start = .;
+ *(.uncached.text)
+ *(.uncached.data)
+ __uncached_end = .;
+ }
+
+ . = ALIGN(THREAD_SIZE);
+ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
+ *(.data.init_task)
+
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
+
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.read_mostly)
+
+ . = ALIGN(PAGE_SIZE);
+ *(.data.page_aligned)
+
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+
+ DATA_DATA
+ CONSTRUCTORS
+ }
+
+ _edata = .; /* End of data section */
+
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .;
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { INIT_DATA }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ SECURITY_INIT
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+
+ . = ALIGN(4);
+ .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) {
+ __machvec_start = .;
+ *(.machvec.init)
+ __machvec_end = .;
+ }
+
+ PERCPU(PAGE_SIZE)
+
+ /*
+ * .exit.text is discarded at runtime, not link time, to deal with
+ * references from __bug_table
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT }
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA }
+
+ . = ALIGN(PAGE_SIZE);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __init_end = .;
+ __bss_start = .; /* BSS */
+ *(.bss.page_aligned)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = .; /* uClinux MTD sucks */
+ _end = . ;
+ }
+
+ /*
+ * When something in the kernel is NOT compiled as a module, the
+ * module cleanup code and data are put into these segments. Both
+ * can then be thrown away, as cleanup code is never called unless
+ * it's a module.
+ */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+}
+++ /dev/null
-/*
- * ld script to make SuperH Linux kernel
- * Written by Niibe Yutaka
- */
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm-generic/vmlinux.lds.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-#else
-OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux")
-#endif
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-SECTIONS
-{
-#ifdef CONFIG_PMB_FIXED
- . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
- CONFIG_ZERO_PAGE_OFFSET;
-#elif defined(CONFIG_32BIT)
- . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
-#else
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
-#endif
-
- _text = .; /* Text and read-only data */
-
- .empty_zero_page : {
- *(.empty_zero_page)
- } = 0
-
- .text : {
- HEAD_TEXT
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
- *(.gnu.warning)
- } = 0x0009
-
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- _etext = .; /* End of text section */
-
- NOTES
- RO_DATA(PAGE_SIZE)
-
- /*
- * Code which must be executed uncached and the associated data
- */
- . = ALIGN(PAGE_SIZE);
- __uncached_start = .;
- .uncached.text : { *(.uncached.text) }
- .uncached.data : { *(.uncached.data) }
- __uncached_end = .;
-
- . = ALIGN(THREAD_SIZE);
- .data : { /* Data */
- *(.data.init_task)
-
- . = ALIGN(L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
-
- . = ALIGN(L1_CACHE_BYTES);
- *(.data.read_mostly)
-
- . = ALIGN(PAGE_SIZE);
- *(.data.page_aligned)
-
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- DATA_DATA
- CONSTRUCTORS
- }
-
- _edata = .; /* End of data section */
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- _sinittext = .;
- .init.text : { INIT_TEXT }
- _einittext = .;
- .init.data : { INIT_DATA }
-
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
-
- SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- . = ALIGN(4);
- __machvec_start = .;
- .machvec.init : { *(.machvec.init) }
- __machvec_end = .;
-
- PERCPU(PAGE_SIZE)
-
- /*
- * .exit.text is discarded at runtime, not link time, to deal with
- * references from __bug_table
- */
- .exit.text : { EXIT_TEXT }
- .exit.data : { EXIT_DATA }
-
- . = ALIGN(PAGE_SIZE);
- .bss : {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- _ebss = .; /* uClinux MTD sucks */
- _end = . ;
- }
-
- /*
- * When something in the kernel is NOT compiled as a module, the
- * module cleanup code and data are put into these segments. Both
- * can then be thrown away, as cleanup code is never called unless
- * it's a module.
- */
- /DISCARD/ : {
- *(.exitcall.exit)
- }
-
- STABS_DEBUG
- DWARF_DEBUG
-}
+++ /dev/null
-/*
- * ld script to make SH64 Linux kernel
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- *
- * benedict.gaster@superh.com: 2nd May 2002
- * Add definition of empty_zero_page to be the first page of kernel image.
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the
- * same time.
- *
- * lethal@linux-sh.org: 9th May 2003
- * Kill off GLOBAL_NAME() usage and other CDC-isms.
- *
- * lethal@linux-sh.org: 19th May 2003
- * Remove support for ancient toolchains.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-
-#define LOAD_OFFSET CONFIG_PAGE_OFFSET
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(sh:sh5)
-
-#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET)
-
-ENTRY(__start)
-SECTIONS
-{
- . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE;
- _text = .; /* Text and read-only data */
-
- .empty_zero_page : C_PHYS(.empty_zero_page) {
- *(.empty_zero_page)
- } = 0
-
- .text : C_PHYS(.text) {
- HEAD_TEXT
- TEXT_TEXT
- *(.text64)
- *(.text..SHmedia32)
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- *(.fixup)
- *(.gnu.warning)
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
- } = 0x6ff0fff0
-#else
- } = 0xf0fff06f
-#endif
-
- /* We likely want __ex_table to be Cache Line aligned */
- . = ALIGN(L1_CACHE_BYTES); /* Exception table */
- __start___ex_table = .;
- __ex_table : C_PHYS(__ex_table) { *(__ex_table) }
- __stop___ex_table = .;
-
- _etext = .; /* End of text section */
-
- NOTES
- RO_DATA(PAGE_SIZE)
-
- . = ALIGN(THREAD_SIZE);
- .data : C_PHYS(.data) { /* Data */
- *(.data.init_task)
-
- . = ALIGN(L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
-
- . = ALIGN(L1_CACHE_BYTES);
- *(.data.read_mostly)
-
- . = ALIGN(PAGE_SIZE);
- *(.data.page_aligned)
-
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
- DATA_DATA
- CONSTRUCTORS
- }
-
- _edata = .; /* End of data section */
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .;
- _sinittext = .;
- .init.text : C_PHYS(.init.text) { INIT_TEXT }
- _einittext = .;
- .init.data : C_PHYS(.init.data) { INIT_DATA }
- . = ALIGN(L1_CACHE_BYTES); /* Better if Cache Line aligned */
- __setup_start = .;
- .init.setup : C_PHYS(.init.setup) { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : C_PHYS(.initcall.init) {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : C_PHYS(.con_initcall.init) {
- *(.con_initcall.init)
- }
- __con_initcall_end = .;
-
- SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- __initramfs_start = .;
- .init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- . = ALIGN(8);
- __machvec_start = .;
- .machvec.init : C_PHYS(.machvec.init) { *(.machvec.init) }
- __machvec_end = .;
-
- PERCPU(PAGE_SIZE)
-
- /*
- * .exit.text is discarded at runtime, not link time, to deal with
- * references from __bug_table
- */
- .exit.text : C_PHYS(.exit.text) { EXIT_TEXT }
- .exit.data : C_PHYS(.exit.data) { EXIT_DATA }
-
- . = ALIGN(PAGE_SIZE);
- .bss : C_PHYS(.bss) {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- _ebss = .; /* uClinux MTD sucks */
- _end = . ;
- }
-
- /*
- * When something in the kernel is NOT compiled as a module, the
- * module cleanup code and data are put into these segments. Both
- * can then be thrown away, as cleanup code is never called unless
- * it's a module.
- */
- /DISCARD/ : {
- *(.exitcall.exit)
- }
-
- STABS_DEBUG
- DWARF_DEBUG
-}
+++ /dev/null
-syscalltab.h
(" =============================================================\n");
}
-/* ======================================================================= */
-
-#ifdef CONFIG_POOR_MANS_STRACE
-
-#include "syscalltab.h"
-
-struct ring_node {
- int evt;
- int ret_addr;
- int event;
- int tra;
- int pid;
- unsigned long sp;
- unsigned long pc;
-};
-
-static struct ring_node event_ring[16];
-static int event_ptr = 0;
-
-struct stored_syscall_data {
- int pid;
- int syscall_number;
-};
-
-#define N_STORED_SYSCALLS 16
-
-static struct stored_syscall_data stored_syscalls[N_STORED_SYSCALLS];
-static int syscall_next=0;
-static int syscall_next_print=0;
-
-void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs)
-{
- int syscallno = tra & 0xff;
- unsigned long sp;
- unsigned long stack_bottom;
- int pid;
- struct ring_node *rr;
-
- pid = current->pid;
- stack_bottom = (unsigned long) task_stack_page(current);
- asm volatile("ori r15, 0, %0" : "=r" (sp));
- rr = event_ring + event_ptr;
- rr->evt = evt;
- rr->ret_addr = ret_addr;
- rr->event = event;
- rr->tra = tra;
- rr->pid = pid;
- rr->sp = sp;
- rr->pc = regs->pc;
-
- if (sp < stack_bottom + 3092) {
- int i, j;
- printk("evt_debug : stack underflow report\n");
- for (j=0, i = event_ptr; j<16; j++) {
- rr = event_ring + i;
- printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",
- rr->evt, rr->event, rr->tra, rr->pid, rr->sp, rr->pc);
- i--;
- i &= 15;
- }
- panic("STACK UNDERFLOW\n");
- }
-
- event_ptr = (event_ptr + 1) & 15;
-
- if ((event == 2) && (evt == 0x160)) {
- if (syscallno < NUM_SYSCALL_INFO_ENTRIES) {
- /* Store the syscall information to print later. We
- * can't print this now - currently we're running with
- * SR.BL=1, so we can't take a tlbmiss (which could occur
- * in the console drivers under printk).
- *
- * Just overwrite old entries on ring overflow - this
- * is only for last-hope debugging. */
- stored_syscalls[syscall_next].pid = current->pid;
- stored_syscalls[syscall_next].syscall_number = syscallno;
- syscall_next++;
- syscall_next &= (N_STORED_SYSCALLS - 1);
- }
- }
-}
-
-static void drain_syscalls(void) {
- while (syscall_next_print != syscall_next) {
- printk("Task %d: %s()\n",
- stored_syscalls[syscall_next_print].pid,
- syscall_info_table[stored_syscalls[syscall_next_print].syscall_number].name);
- syscall_next_print++;
- syscall_next_print &= (N_STORED_SYSCALLS - 1);
- }
-}
-
-void evt_debug2(unsigned int ret)
-{
- drain_syscalls();
- printk("Task %d: syscall returns %08x\n", current->pid, ret);
-}
-
-void evt_debug_ret_from_irq(struct pt_regs *regs)
-{
- int pid;
- struct ring_node *rr;
-
- pid = current->pid;
- rr = event_ring + event_ptr;
- rr->evt = 0xffff;
- rr->ret_addr = 0;
- rr->event = 0;
- rr->tra = 0;
- rr->pid = pid;
- rr->pc = regs->pc;
- event_ptr = (event_ptr + 1) & 15;
-}
-
-void evt_debug_ret_from_exc(struct pt_regs *regs)
-{
- int pid;
- struct ring_node *rr;
-
- pid = current->pid;
- rr = event_ring + event_ptr;
- rr->evt = 0xfffe;
- rr->ret_addr = 0;
- rr->event = 0;
- rr->tra = 0;
- rr->pid = pid;
- rr->pc = regs->pc;
- event_ptr = (event_ptr + 1) & 15;
-}
-
-#endif /* CONFIG_POOR_MANS_STRACE */
-
-/* ======================================================================= */
-
void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs)
{
print_dtlb();
print_itlb();
}
-
-/* ======================================================================= */
-
-/*
-** Depending on <base> scan the MMU, Data or Instruction side
-** looking for a valid mapping matching Eaddr & asid.
-** Return -1 if not found or the TLB id entry otherwise.
-** Note: it works only for 4k pages!
-*/
-static unsigned long
-lookup_mmu_side(unsigned long base, unsigned long Eaddr, unsigned long asid)
-{
- regType_t pteH;
- unsigned long epn;
- int count;
-
- epn = Eaddr & 0xfffff000;
-
- for (count = 0; count < MAX_TLBs; count++, base += TLB_STEP) {
- pteH = getConfigReg(base);
- if (GET_VALID(pteH))
- if ((unsigned long) GET_EPN(pteH) == epn)
- if ((unsigned long) GET_ASID(pteH) == asid)
- break;
- }
- return ((unsigned long) ((count < MAX_TLBs) ? base : -1));
-}
-
-unsigned long lookup_dtlb(unsigned long Eaddr)
-{
- unsigned long asid = get_asid();
- return (lookup_mmu_side((u64) DTLB_BASE, Eaddr, asid));
-}
-
-unsigned long lookup_itlb(unsigned long Eaddr)
-{
- unsigned long asid = get_asid();
- return (lookup_mmu_side((u64) ITLB_BASE, Eaddr, asid));
-}
-
-void print_page(struct page *page)
-{
- printk(" page[%p] -> index 0x%lx, count 0x%x, flags 0x%lx\n",
- page, page->index, page_count(page), page->flags);
- printk(" address_space = %p, pages =%ld\n", page->mapping,
- page->mapping->nrpages);
-
-}
* for more details.
*/
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <cpu/registers.h>
-
-/* THIS IS A PHYSICAL ADDRESS */
-#define HDSP2534_ADDR (0x04002100)
-
-#ifdef CONFIG_SH_CAYMAN
-
-static void poor_mans_delay(void)
-{
- int i;
- for (i = 0; i < 2500000; i++) {
- } /* poor man's delay */
-}
-
-static void show_value(unsigned long x)
-{
- int i;
- unsigned nibble;
- for (i = 0; i < 8; i++) {
- nibble = ((x >> (i * 4)) & 0xf);
-
- ctrl_outb(nibble + ((nibble > 9) ? 55 : 48),
- HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
- }
-}
-
-#endif
-
void
panic_handler(unsigned long panicPC, unsigned long panicSSR,
unsigned long panicEXPEVT)
{
-#ifdef CONFIG_SH_CAYMAN
- while (1) {
- /* This piece of code displays the PC on the LED display */
- show_value(panicPC);
- poor_mans_delay();
- show_value(panicSSR);
- poor_mans_delay();
- show_value(panicEXPEVT);
- poor_mans_delay();
- }
-#endif
-
/* Never return from the panic handler */
for (;;) ;
-
}
.global __sdivsi3
+ .global __sdivsi3_1
+ .global __sdivsi3_2
.section .text..SHmedia32,"ax"
.align 2
/* clobbered: r1,r18,r19,r20,r21,r25,tr0 */
/* result in r0 */
__sdivsi3:
+__sdivsi3_1:
ptb __div_table,tr0
+ gettr tr0,r20
+__sdivsi3_2:
nsb r5, r1
shlld r5, r1, r25 /* normalize; [-2 ..1, 1..2) in s2.62 */
shari r25, 58, r21 /* extract 5(6) bit index (s2.4 with hole -1..1) */
/* bubble */
- gettr tr0,r20
ldx.ub r20, r21, r19 /* u0.8 */
shari r25, 32, r25 /* normalize to s2.30 */
shlli r21, 1, r21
:"0"(loops));
}
-inline void __const_udelay(unsigned long xloops)
+void __const_udelay(unsigned long xloops)
{
__delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
}
default "0x20000000" if MMU && SUPERH64
default "0x00000000"
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 9 64 if PAGE_SIZE_16KB
+ default "9" if PAGE_SIZE_16KB
+ range 7 64 if PAGE_SIZE_64KB
+ default "7" if PAGE_SIZE_64KB
+ range 11 64
+ default "14" if !MMU
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. Keep this in mind when
+ choosing a value for this option.
+
config MEMORY_START
hex "Physical memory start address"
default "0x08000000"
endchoice
-config ENTRY_OFFSET
- hex
- default "0x00001000" if PAGE_SIZE_4KB
- default "0x00002000" if PAGE_SIZE_8KB
- default "0x00004000" if PAGE_SIZE_16KB
- default "0x00010000" if PAGE_SIZE_64KB
- default "0x00000000"
-
choice
prompt "HugeTLB page size"
depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
static inline void sh64_icache_inv_all(void)
{
unsigned long long addr, flag, data;
- unsigned int flags;
+ unsigned long flags;
addr = ICCR0;
flag = ICCR0_ICI;
unsigned long eaddr;
unsigned long after_last_page_start;
unsigned long mm_asid, current_asid;
- unsigned long long flags = 0ULL;
+ unsigned long flags = 0;
mm_asid = cpu_asid(smp_processor_id(), mm);
current_asid = get_asid();
unsigned long long eaddr = start;
unsigned long long eaddr_end = start + len;
unsigned long current_asid, mm_asid;
- unsigned long long flags;
+ unsigned long flags;
unsigned long long epage_start;
/*
* alloco is a NOP if the cache is write-through.
*/
if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)))
- ctrl_inb(eaddr);
+ __raw_readb((unsigned long)eaddr);
}
}
}
static struct kcore_list kcore_mem, kcore_vmalloc;
-int after_bootmem = 0;
void __init mem_init(void)
{
memset(empty_zero_page, 0, PAGE_SIZE);
__flush_wback_region(empty_zero_page, PAGE_SIZE);
- after_bootmem = 1;
-
codesize = (unsigned long) &_etext - (unsigned long) &_text;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
return NULL;
/*
- * If we're on an SH7751 or SH7780 PCI controller, PCI memory is
- * mapped at the end of the address space (typically 0xfd000000)
- * in a non-translatable area, so mapping through page tables for
- * this area is not only pointless, but also fundamentally
- * broken. Just return the physical address instead.
+ * If we're in the fixed PCI memory range, mapping through page
+ * tables is not only pointless, but also fundamentally broken.
+ * Just return the physical address instead.
*
* For boards that map a small PCI memory aperture somewhere in
* P1/P2 space, ioremap() will already do the right thing,
* and we'll never get this far.
*/
- if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
+ if (is_pci_memory_fixed_range(phys_addr, size))
return (void __iomem *)phys_addr;
#if !defined(CONFIG_PMB_FIXED)
unsigned long seg = PXSEG(vaddr);
struct vm_struct *p;
- if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
+ if (seg < P3SEG || vaddr >= P3_ADDR_MAX)
+ return;
+ if (is_pci_memory_fixed_range(vaddr, 0))
return;
#ifdef CONFIG_PMB
#include <linux/io.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <asm/addrspace.h>
#include <asm/tlbflush.h>
#include <asm/mmu.h>
-static void shmedia_mapioaddr(unsigned long, unsigned long);
-static unsigned long shmedia_ioremap(struct resource *, u32, int);
-
-/*
- * Generic mapping function (not visible outside):
- */
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void *__ioremap(unsigned long phys_addr, unsigned long size,
- unsigned long flags)
-{
- void * addr;
- struct vm_struct * area;
- unsigned long offset, last_addr;
- pgprot_t pgprot;
-
- /* Don't allow wraparound or zero size */
- last_addr = phys_addr + size - 1;
- if (!size || last_addr < phys_addr)
- return NULL;
-
- pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ |
- _PAGE_WRITE | _PAGE_DIRTY |
- _PAGE_ACCESSED | _PAGE_SHARED | flags);
-
- /*
- * Mappings have to be page-aligned
- */
- offset = phys_addr & ~PAGE_MASK;
- phys_addr &= PAGE_MASK;
- size = PAGE_ALIGN(last_addr + 1) - phys_addr;
-
- /*
- * Ok, go for it..
- */
- area = get_vm_area(size, VM_IOREMAP);
- if (!area)
- return NULL;
- pr_debug("Get vm_area returns %p addr %p\n", area, area->addr);
- area->phys_addr = phys_addr;
- addr = area->addr;
- if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
- phys_addr, pgprot)) {
- vunmap(addr);
- return NULL;
- }
- return (void *) (offset + (char *)addr);
-}
-EXPORT_SYMBOL(__ioremap);
-
-void __iounmap(void *addr)
-{
- struct vm_struct *area;
-
- vfree((void *) (PAGE_MASK & (unsigned long) addr));
- area = remove_vm_area((void *) (PAGE_MASK & (unsigned long) addr));
- if (!area) {
- printk(KERN_ERR "iounmap: bad address %p\n", addr);
- return;
- }
-
- kfree(area);
-}
-EXPORT_SYMBOL(__iounmap);
-
static struct resource shmedia_iomap = {
.name = "shmedia_iomap",
.start = IOBASE_VADDR + PAGE_SIZE,
.end = IOBASE_END - 1,
};
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va);
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
+ unsigned long flags);
static void shmedia_unmapioaddr(unsigned long vaddr);
-static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz);
+static void __iomem *shmedia_ioremap(struct resource *res, u32 pa,
+ int sz, unsigned long flags);
/*
* We have the same problem as the SPARC, so lets have the same comment:
static struct xresource *xres_alloc(void)
{
- struct xresource *xrp;
- int n;
-
- xrp = xresv;
- for (n = 0; n < XNRES; n++) {
- if (xrp->xflag == 0) {
- xrp->xflag = 1;
- return xrp;
- }
- xrp++;
- }
- return NULL;
+ struct xresource *xrp;
+ int n;
+
+ xrp = xresv;
+ for (n = 0; n < XNRES; n++) {
+ if (xrp->xflag == 0) {
+ xrp->xflag = 1;
+ return xrp;
+ }
+ xrp++;
+ }
+ return NULL;
}
static void xres_free(struct xresource *xrp)
return NULL;
}
-static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size,
- const char *name)
+static void __iomem *shmedia_alloc_io(unsigned long phys, unsigned long size,
+ const char *name, unsigned long flags)
{
- static int printed_full = 0;
- struct xresource *xres;
- struct resource *res;
- char *tack;
- int tlen;
-
- if (name == NULL) name = "???";
-
- if ((xres = xres_alloc()) != 0) {
- tack = xres->xname;
- res = &xres->xres;
- } else {
- if (!printed_full) {
- printk("%s: done with statics, switching to kmalloc\n",
- __func__);
- printed_full = 1;
- }
- tlen = strlen(name);
- tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL);
- if (!tack)
- return -ENOMEM;
- memset(tack, 0, sizeof(struct resource));
- res = (struct resource *) tack;
- tack += sizeof (struct resource);
- }
-
- strncpy(tack, name, XNMLN);
- tack[XNMLN] = 0;
- res->name = tack;
-
- return shmedia_ioremap(res, phys, size);
+ static int printed_full;
+ struct xresource *xres;
+ struct resource *res;
+ char *tack;
+ int tlen;
+
+ if (name == NULL)
+ name = "???";
+
+ xres = xres_alloc();
+ if (xres != 0) {
+ tack = xres->xname;
+ res = &xres->xres;
+ } else {
+ if (!printed_full) {
+ printk(KERN_NOTICE "%s: done with statics, "
+ "switching to kmalloc\n", __func__);
+ printed_full = 1;
+ }
+ tlen = strlen(name);
+ tack = kmalloc(sizeof(struct resource) + tlen + 1, GFP_KERNEL);
+ if (!tack)
+ return NULL;
+ memset(tack, 0, sizeof(struct resource));
+ res = (struct resource *) tack;
+ tack += sizeof(struct resource);
+ }
+
+ strncpy(tack, name, XNMLN);
+ tack[XNMLN] = 0;
+ res->name = tack;
+
+ return shmedia_ioremap(res, phys, size, flags);
}
-static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz)
+static void __iomem *shmedia_ioremap(struct resource *res, u32 pa, int sz,
+ unsigned long flags)
{
- unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
+ unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK);
unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK;
- unsigned long va;
- unsigned int psz;
+ unsigned long va;
+ unsigned int psz;
- if (allocate_resource(&shmedia_iomap, res, round_sz,
+ if (allocate_resource(&shmedia_iomap, res, round_sz,
shmedia_iomap.start, shmedia_iomap.end,
PAGE_SIZE, NULL, NULL) != 0) {
- panic("alloc_io_res(%s): cannot occupy\n",
- (res->name != NULL)? res->name: "???");
- }
+ panic("alloc_io_res(%s): cannot occupy\n",
+ (res->name != NULL) ? res->name : "???");
+ }
- va = res->start;
- pa &= PAGE_MASK;
+ va = res->start;
+ pa &= PAGE_MASK;
psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
- /* log at boot time ... */
- printk("mapioaddr: %6s [%2d page%s] va 0x%08lx pa 0x%08x\n",
- ((res->name != NULL) ? res->name : "???"),
- psz, psz == 1 ? " " : "s", va, pa);
-
- for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
- shmedia_mapioaddr(pa, va);
- va += PAGE_SIZE;
- pa += PAGE_SIZE;
- }
-
- res->start += offset;
- res->end = res->start + sz - 1; /* not strictly necessary.. */
+ for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) {
+ shmedia_mapioaddr(pa, va, flags);
+ va += PAGE_SIZE;
+ pa += PAGE_SIZE;
+ }
- return res->start;
+ return (void __iomem *)(unsigned long)(res->start + offset);
}
static void shmedia_free_io(struct resource *res)
static __init_refok void *sh64_get_page(void)
{
- extern int after_bootmem;
void *page;
- if (after_bootmem) {
- page = (void *)get_zeroed_page(GFP_ATOMIC);
- } else {
+ if (slab_is_available())
+ page = (void *)get_zeroed_page(GFP_KERNEL);
+ else
page = alloc_bootmem_pages(PAGE_SIZE);
- }
if (!page || ((unsigned long)page & ~PAGE_MASK))
panic("sh64_get_page: Out of memory already?\n");
return page;
}
-static void shmedia_mapioaddr(unsigned long pa, unsigned long va)
+static void shmedia_mapioaddr(unsigned long pa, unsigned long va,
+ unsigned long flags)
{
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep, pte;
pgprot_t prot;
- unsigned long flags = 1; /* 1 = CB0-1 device */
pr_debug("shmedia_mapiopage pa %08lx va %08lx\n", pa, va);
+ if (!flags)
+ flags = 1; /* 1 = CB0-1 device */
+
pgdp = pgd_offset_k(va);
if (pgd_none(*pgdp) || !pgd_present(*pgdp)) {
pudp = (pud_t *)sh64_get_page();
}
pmdp = pmd_offset(pudp, va);
- if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) {
+ if (pmd_none(*pmdp) || !pmd_present(*pmdp)) {
ptep = (pte_t *)sh64_get_page();
set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE));
}
pte_clear(&init_mm, vaddr, ptep);
}
-unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *name)
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+ unsigned long flags)
{
- if (size < PAGE_SIZE)
- size = PAGE_SIZE;
+ char name[14];
- return shmedia_alloc_io(phys, size, name);
+ sprintf(name, "phys_%08x", (u32)offset);
+ return shmedia_alloc_io(offset, size, name, flags);
}
-EXPORT_SYMBOL(onchip_remap);
+EXPORT_SYMBOL(__ioremap);
-void onchip_unmap(unsigned long vaddr)
+void __iounmap(void __iomem *virtual)
{
+ unsigned long vaddr = (unsigned long)virtual & PAGE_MASK;
struct resource *res;
unsigned int psz;
return;
}
- psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
-
- printk(KERN_DEBUG "unmapioaddr: %6s [%2d page%s] freed\n",
- res->name, psz, psz == 1 ? " " : "s");
+ psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE;
shmedia_free_io(res);
kfree(res);
}
}
-EXPORT_SYMBOL(onchip_unmap);
+EXPORT_SYMBOL(__iounmap);
-#ifdef CONFIG_PROC_FS
static int
ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
void *data)
for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
if (p + 32 >= e) /* Better than nothing */
break;
- if ((nm = r->name) == 0) nm = "???";
+ nm = r->name;
+ if (nm == NULL)
+ nm = "???";
+
p += sprintf(p, "%08lx-%08lx: %s\n",
(unsigned long)r->start,
(unsigned long)r->end, nm);
return p-buf;
}
-#endif /* CONFIG_PROC_FS */
static int __init register_proc_onchip(void)
{
-#ifdef CONFIG_PROC_FS
- create_proc_read_entry("io_map",0,0, ioremap_proc_info, &shmedia_iomap);
-#endif
+ create_proc_read_entry("io_map", 0, 0, ioremap_proc_info,
+ &shmedia_iomap);
return 0;
}
-
-__initcall(register_proc_onchip);
+late_initcall(register_proc_onchip);
/*
* arch/sh/mm/mmap.c
*
- * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
/*
* To avoid cache aliases, we map the shared page with same color.
*/
-#define COLOUR_ALIGN(addr, pgoff) \
- ((((addr) + shm_align_mask) & ~shm_align_mask) + \
- (((pgoff) << PAGE_SHIFT) & shm_align_mask))
+static inline unsigned long COLOUR_ALIGN(unsigned long addr,
+ unsigned long pgoff)
+{
+ unsigned long base = (addr + shm_align_mask) & ~shm_align_mask;
+ unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
+
+ return base + off;
+}
+
+static inline unsigned long COLOUR_ALIGN_DOWN(unsigned long addr,
+ unsigned long pgoff)
+{
+ unsigned long base = addr & ~shm_align_mask;
+ unsigned long off = (pgoff << PAGE_SHIFT) & shm_align_mask;
+
+ if (base + off <= addr)
+ return base + off;
+
+ return base - off;
+}
unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
addr = COLOUR_ALIGN(addr, pgoff);
}
}
+
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
+ const unsigned long len, const unsigned long pgoff,
+ const unsigned long flags)
+{
+ struct vm_area_struct *vma;
+ struct mm_struct *mm = current->mm;
+ unsigned long addr = addr0;
+ int do_colour_align;
+
+ if (flags & MAP_FIXED) {
+ /* We do not accept a shared mapping if it would violate
+ * cache aliasing constraints.
+ */
+ if ((flags & MAP_SHARED) &&
+ ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask))
+ return -EINVAL;
+ return addr;
+ }
+
+ if (unlikely(len > TASK_SIZE))
+ return -ENOMEM;
+
+ do_colour_align = 0;
+ if (filp || (flags & MAP_SHARED))
+ do_colour_align = 1;
+
+ /* requesting a specific address */
+ if (addr) {
+ if (do_colour_align)
+ addr = COLOUR_ALIGN(addr, pgoff);
+ else
+ addr = PAGE_ALIGN(addr);
+
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+
+ /* check if free_area_cache is useful for us */
+ if (len <= mm->cached_hole_size) {
+ mm->cached_hole_size = 0;
+ mm->free_area_cache = mm->mmap_base;
+ }
+
+ /* either no address requested or can't fit in requested address hole */
+ addr = mm->free_area_cache;
+ if (do_colour_align) {
+ unsigned long base = COLOUR_ALIGN_DOWN(addr-len, pgoff);
+
+ addr = base + len;
+ }
+
+ /* make sure it can fit in the remaining address space */
+ if (likely(addr > len)) {
+ vma = find_vma(mm, addr-len);
+ if (!vma || addr <= vma->vm_start) {
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr-len);
+ }
+ }
+
+ if (unlikely(mm->mmap_base < len))
+ goto bottomup;
+
+ addr = mm->mmap_base-len;
+ if (do_colour_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+
+ do {
+ /*
+ * Lookup failure means no vma is above this address,
+ * else if new region fits below vma->vm_start,
+ * return with success:
+ */
+ vma = find_vma(mm, addr);
+ if (likely(!vma || addr+len <= vma->vm_start)) {
+ /* remember the address as a hint for next time */
+ return (mm->free_area_cache = addr);
+ }
+
+ /* remember the largest hole we saw so far */
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
+
+ /* try just below the current vma->vm_start */
+ addr = vma->vm_start-len;
+ if (do_colour_align)
+ addr = COLOUR_ALIGN_DOWN(addr, pgoff);
+ } while (likely(len < vma->vm_start));
+
+bottomup:
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ mm->cached_hole_size = ~0UL;
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
+ addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
+ /*
+ * Restore the topdown base:
+ */
+ mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = ~0UL;
+
+ return addr;
+}
#endif /* CONFIG_MMU */
/*
case CPU_SH7785:
case CPU_SH7786:
case CPU_SH7723:
+ case CPU_SH7724:
case CPU_SHX3:
lmodel = &op_model_sh4a_ops;
break;
7619SE SH_7619_SOLUTION_ENGINE
7721SE SH_7721_SOLUTION_ENGINE
7722SE SH_7722_SOLUTION_ENGINE
+7724SE SH_7724_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
+obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
+obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
*/
#include <linux/init.h>
-#include <linux/bootmem.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <linux/sh_cmt.h>
+#include <linux/sh_timer.h>
struct sh_cmt_priv {
void __iomem *mapbase;
unsigned long rate;
spinlock_t lock;
struct clock_event_device ced;
+ struct clocksource cs;
unsigned long total_cycles;
};
static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
{
- struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
void __iomem *base = p->mapbase;
unsigned long offs;
static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
unsigned long value)
{
- struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
void __iomem *base = p->mapbase;
unsigned long offs;
int *has_wrapped)
{
unsigned long v1, v2, v3;
+ int o1, o2;
+
+ o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
/* Make sure the timer value is stable. Stolen from acpi_pm.c */
do {
+ o2 = o1;
v1 = sh_cmt_read(p, CMCNT);
v2 = sh_cmt_read(p, CMCNT);
v3 = sh_cmt_read(p, CMCNT);
- } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
- || (v3 > v1 && v3 < v2)));
+ o1 = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+ } while (unlikely((o1 != o2) || (v1 > v2 && v1 < v3)
+ || (v2 > v3 && v2 < v1) || (v3 > v1 && v3 < v2)));
- *has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+ *has_wrapped = o1;
return v2;
}
static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
{
- struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
{
- struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
int ret;
/* enable clock */
pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk);
return ret;
}
- *rate = clk_get_rate(p->clk) / 8;
/* make sure channel is disabled */
sh_cmt_start_stop_ch(p, 0);
/* configure channel, periodic mode and maximum timeout */
- if (p->width == 16)
- sh_cmt_write(p, CMCSR, 0);
- else
+ if (p->width == 16) {
+ *rate = clk_get_rate(p->clk) / 512;
+ sh_cmt_write(p, CMCSR, 0x43);
+ } else {
+ *rate = clk_get_rate(p->clk) / 8;
sh_cmt_write(p, CMCSR, 0x01a4);
+ }
sh_cmt_write(p, CMCOR, 0xffffffff);
sh_cmt_write(p, CMCNT, 0);
spin_unlock_irqrestore(&p->lock, flags);
}
+static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
+{
+ return container_of(cs, struct sh_cmt_priv, cs);
+}
+
+static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
+{
+ struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+ unsigned long flags, raw;
+ unsigned long value;
+ int has_wrapped;
+
+ spin_lock_irqsave(&p->lock, flags);
+ value = p->total_cycles;
+ raw = sh_cmt_get_counter(p, &has_wrapped);
+
+ if (unlikely(has_wrapped))
+ raw += p->match_value;
+ spin_unlock_irqrestore(&p->lock, flags);
+
+ return value + raw;
+}
+
+static int sh_cmt_clocksource_enable(struct clocksource *cs)
+{
+ struct sh_cmt_priv *p = cs_to_sh_cmt(cs);
+ int ret;
+
+ p->total_cycles = 0;
+
+ ret = sh_cmt_start(p, FLAG_CLOCKSOURCE);
+ if (ret)
+ return ret;
+
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 0;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+ return 0;
+}
+
+static void sh_cmt_clocksource_disable(struct clocksource *cs)
+{
+ sh_cmt_stop(cs_to_sh_cmt(cs), FLAG_CLOCKSOURCE);
+}
+
+static int sh_cmt_register_clocksource(struct sh_cmt_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clocksource *cs = &p->cs;
+
+ cs->name = name;
+ cs->rating = rating;
+ cs->read = sh_cmt_clocksource_read;
+ cs->enable = sh_cmt_clocksource_enable;
+ cs->disable = sh_cmt_clocksource_disable;
+ cs->mask = CLOCKSOURCE_MASK(sizeof(unsigned long) * 8);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ pr_info("sh_cmt: %s used as clock source\n", cs->name);
+ clocksource_register(cs);
+ return 0;
+}
+
static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced)
{
return container_of(ced, struct sh_cmt_priv, ced);
clockevents_register_device(ced);
}
-int sh_cmt_register(struct sh_cmt_priv *p, char *name,
- unsigned long clockevent_rating,
- unsigned long clocksource_rating)
+static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
+ unsigned long clockevent_rating,
+ unsigned long clocksource_rating)
{
if (p->width == (sizeof(p->max_match_value) * 8))
p->max_match_value = ~0;
if (clockevent_rating)
sh_cmt_register_clockevent(p, name, clockevent_rating);
+ if (clocksource_rating)
+ sh_cmt_register_clocksource(p, name, clocksource_rating);
+
return 0;
}
static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
{
- struct sh_cmt_config *cfg = pdev->dev.platform_data;
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
struct resource *res;
int irq, ret;
ret = -ENXIO;
if (resource_size(res) == 6) {
p->width = 16;
p->overflow_bit = 0x80;
- p->clear_bits = ~0xc0;
+ p->clear_bits = ~0x80;
} else {
p->width = 32;
p->overflow_bit = 0x8000;
static int __devinit sh_cmt_probe(struct platform_device *pdev)
{
struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
int ret;
+ if (p) {
+ pr_info("sh_cmt: %s kept as earlytimer\n", cfg->name);
+ return 0;
+ }
+
p = kmalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
ret = sh_cmt_setup(p, pdev);
if (ret) {
kfree(p);
-
platform_set_drvdata(pdev, NULL);
}
return ret;
platform_driver_unregister(&sh_cmt_device_driver);
}
+early_platform_init("earlytimer", &sh_cmt_device_driver);
module_init(sh_cmt_init);
module_exit(sh_cmt_exit);
--- /dev/null
+/*
+ * SuperH Timer Support - MTU2
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clockchips.h>
+#include <linux/sh_timer.h>
+
+struct sh_mtu2_priv {
+ void __iomem *mapbase;
+ struct clk *clk;
+ struct irqaction irqaction;
+ struct platform_device *pdev;
+ unsigned long rate;
+ unsigned long periodic;
+ struct clock_event_device ced;
+};
+
+static DEFINE_SPINLOCK(sh_mtu2_lock);
+
+#define TSTR -1 /* shared register */
+#define TCR 0 /* channel register */
+#define TMDR 1 /* channel register */
+#define TIOR 2 /* channel register */
+#define TIER 3 /* channel register */
+#define TSR 4 /* channel register */
+#define TCNT 5 /* channel register */
+#define TGR 6 /* channel register */
+
+static unsigned long mtu2_reg_offs[] = {
+ [TCR] = 0,
+ [TMDR] = 1,
+ [TIOR] = 2,
+ [TIER] = 4,
+ [TSR] = 5,
+ [TCNT] = 6,
+ [TGR] = 8,
+};
+
+static inline unsigned long sh_mtu2_read(struct sh_mtu2_priv *p, int reg_nr)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == TSTR)
+ return ioread8(base + cfg->channel_offset);
+
+ offs = mtu2_reg_offs[reg_nr];
+
+ if ((reg_nr == TCNT) || (reg_nr == TGR))
+ return ioread16(base + offs);
+ else
+ return ioread8(base + offs);
+}
+
+static inline void sh_mtu2_write(struct sh_mtu2_priv *p, int reg_nr,
+ unsigned long value)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == TSTR) {
+ iowrite8(value, base + cfg->channel_offset);
+ return;
+ }
+
+ offs = mtu2_reg_offs[reg_nr];
+
+ if ((reg_nr == TCNT) || (reg_nr == TGR))
+ iowrite16(value, base + offs);
+ else
+ iowrite8(value, base + offs);
+}
+
+static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ spin_lock_irqsave(&sh_mtu2_lock, flags);
+ value = sh_mtu2_read(p, TSTR);
+
+ if (start)
+ value |= 1 << cfg->timer_bit;
+ else
+ value &= ~(1 << cfg->timer_bit);
+
+ sh_mtu2_write(p, TSTR, value);
+ spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+}
+
+static int sh_mtu2_enable(struct sh_mtu2_priv *p)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(p->clk);
+ if (ret) {
+ pr_err("sh_mtu2: cannot enable clock \"%s\"\n", cfg->clk);
+ return ret;
+ }
+
+ /* make sure channel is disabled */
+ sh_mtu2_start_stop_ch(p, 0);
+
+ p->rate = clk_get_rate(p->clk) / 64;
+ p->periodic = (p->rate + HZ/2) / HZ;
+
+ /* "Periodic Counter Operation" */
+ sh_mtu2_write(p, TCR, 0x23); /* TGRA clear, divide clock by 64 */
+ sh_mtu2_write(p, TIOR, 0);
+ sh_mtu2_write(p, TGR, p->periodic);
+ sh_mtu2_write(p, TCNT, 0);
+ sh_mtu2_write(p, TMDR, 0);
+ sh_mtu2_write(p, TIER, 0x01);
+
+ /* enable channel */
+ sh_mtu2_start_stop_ch(p, 1);
+
+ return 0;
+}
+
+static void sh_mtu2_disable(struct sh_mtu2_priv *p)
+{
+ /* disable channel */
+ sh_mtu2_start_stop_ch(p, 0);
+
+ /* stop clock */
+ clk_disable(p->clk);
+}
+
+static irqreturn_t sh_mtu2_interrupt(int irq, void *dev_id)
+{
+ struct sh_mtu2_priv *p = dev_id;
+
+ /* acknowledge interrupt */
+ sh_mtu2_read(p, TSR);
+ sh_mtu2_write(p, TSR, 0xfe);
+
+ /* notify clockevent layer */
+ p->ced.event_handler(&p->ced);
+ return IRQ_HANDLED;
+}
+
+static struct sh_mtu2_priv *ced_to_sh_mtu2(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_mtu2_priv, ced);
+}
+
+static void sh_mtu2_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct sh_mtu2_priv *p = ced_to_sh_mtu2(ced);
+ int disabled = 0;
+
+ /* deal with old setting first */
+ switch (ced->mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ sh_mtu2_disable(p);
+ disabled = 1;
+ break;
+ default:
+ break;
+ }
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_info("sh_mtu2: %s used for periodic clock events\n",
+ ced->name);
+ sh_mtu2_enable(p);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ if (!disabled)
+ sh_mtu2_disable(p);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ break;
+ }
+}
+
+static void sh_mtu2_register_clockevent(struct sh_mtu2_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clock_event_device *ced = &p->ced;
+ int ret;
+
+ memset(ced, 0, sizeof(*ced));
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->rating = rating;
+ ced->cpumask = cpumask_of(0);
+ ced->set_mode = sh_mtu2_clock_event_mode;
+
+ ret = setup_irq(p->irqaction.irq, &p->irqaction);
+ if (ret) {
+ pr_err("sh_mtu2: failed to request irq %d\n",
+ p->irqaction.irq);
+ return;
+ }
+
+ pr_info("sh_mtu2: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+}
+
+static int sh_mtu2_register(struct sh_mtu2_priv *p, char *name,
+ unsigned long clockevent_rating)
+{
+ if (clockevent_rating)
+ sh_mtu2_register_clockevent(p, name, clockevent_rating);
+
+ return 0;
+}
+
+static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
+{
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ struct resource *res;
+ int irq, ret;
+ ret = -ENXIO;
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ if (!cfg) {
+ dev_err(&p->pdev->dev, "missing platform data\n");
+ goto err0;
+ }
+
+ platform_set_drvdata(pdev, p);
+
+ res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ goto err0;
+ }
+
+ irq = platform_get_irq(p->pdev, 0);
+ if (irq < 0) {
+ dev_err(&p->pdev->dev, "failed to get irq\n");
+ goto err0;
+ }
+
+ /* map memory, let mapbase point to our channel */
+ p->mapbase = ioremap_nocache(res->start, resource_size(res));
+ if (p->mapbase == NULL) {
+ pr_err("sh_mtu2: failed to remap I/O memory\n");
+ goto err0;
+ }
+
+ /* setup data for setup_irq() (too early for request_irq()) */
+ p->irqaction.name = cfg->name;
+ p->irqaction.handler = sh_mtu2_interrupt;
+ p->irqaction.dev_id = p;
+ p->irqaction.irq = irq;
+ p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+ p->irqaction.mask = CPU_MASK_NONE;
+
+ /* get hold of clock */
+ p->clk = clk_get(&p->pdev->dev, cfg->clk);
+ if (IS_ERR(p->clk)) {
+ pr_err("sh_mtu2: cannot get clock \"%s\"\n", cfg->clk);
+ ret = PTR_ERR(p->clk);
+ goto err1;
+ }
+
+ return sh_mtu2_register(p, cfg->name, cfg->clockevent_rating);
+ err1:
+ iounmap(p->mapbase);
+ err0:
+ return ret;
+}
+
+static int __devinit sh_mtu2_probe(struct platform_device *pdev)
+{
+ struct sh_mtu2_priv *p = platform_get_drvdata(pdev);
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ int ret;
+
+ if (p) {
+ pr_info("sh_mtu2: %s kept as earlytimer\n", cfg->name);
+ return 0;
+ }
+
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ ret = sh_mtu2_setup(p, pdev);
+ if (ret) {
+ kfree(p);
+ platform_set_drvdata(pdev, NULL);
+ }
+ return ret;
+}
+
+static int __devexit sh_mtu2_remove(struct platform_device *pdev)
+{
+ return -EBUSY; /* cannot unregister clockevent */
+}
+
+static struct platform_driver sh_mtu2_device_driver = {
+ .probe = sh_mtu2_probe,
+ .remove = __devexit_p(sh_mtu2_remove),
+ .driver = {
+ .name = "sh_mtu2",
+ }
+};
+
+static int __init sh_mtu2_init(void)
+{
+ return platform_driver_register(&sh_mtu2_device_driver);
+}
+
+static void __exit sh_mtu2_exit(void)
+{
+ platform_driver_unregister(&sh_mtu2_device_driver);
+}
+
+early_platform_init("earlytimer", &sh_mtu2_device_driver);
+module_init(sh_mtu2_init);
+module_exit(sh_mtu2_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH MTU2 Timer Driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * SuperH Timer Support - TMU
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/sh_timer.h>
+
+struct sh_tmu_priv {
+ void __iomem *mapbase;
+ struct clk *clk;
+ struct irqaction irqaction;
+ struct platform_device *pdev;
+ unsigned long rate;
+ unsigned long periodic;
+ struct clock_event_device ced;
+ struct clocksource cs;
+};
+
+static DEFINE_SPINLOCK(sh_tmu_lock);
+
+#define TSTR -1 /* shared register */
+#define TCOR 0 /* channel register */
+#define TCNT 1 /* channel register */
+#define TCR 2 /* channel register */
+
+static inline unsigned long sh_tmu_read(struct sh_tmu_priv *p, int reg_nr)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == TSTR)
+ return ioread8(base - cfg->channel_offset);
+
+ offs = reg_nr << 2;
+
+ if (reg_nr == TCR)
+ return ioread16(base + offs);
+ else
+ return ioread32(base + offs);
+}
+
+static inline void sh_tmu_write(struct sh_tmu_priv *p, int reg_nr,
+ unsigned long value)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == TSTR) {
+ iowrite8(value, base - cfg->channel_offset);
+ return;
+ }
+
+ offs = reg_nr << 2;
+
+ if (reg_nr == TCR)
+ iowrite16(value, base + offs);
+ else
+ iowrite32(value, base + offs);
+}
+
+static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ spin_lock_irqsave(&sh_tmu_lock, flags);
+ value = sh_tmu_read(p, TSTR);
+
+ if (start)
+ value |= 1 << cfg->timer_bit;
+ else
+ value &= ~(1 << cfg->timer_bit);
+
+ sh_tmu_write(p, TSTR, value);
+ spin_unlock_irqrestore(&sh_tmu_lock, flags);
+}
+
+static int sh_tmu_enable(struct sh_tmu_priv *p)
+{
+ struct sh_timer_config *cfg = p->pdev->dev.platform_data;
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(p->clk);
+ if (ret) {
+ pr_err("sh_tmu: cannot enable clock \"%s\"\n", cfg->clk);
+ return ret;
+ }
+
+ /* make sure channel is disabled */
+ sh_tmu_start_stop_ch(p, 0);
+
+ /* maximum timeout */
+ sh_tmu_write(p, TCOR, 0xffffffff);
+ sh_tmu_write(p, TCNT, 0xffffffff);
+
+ /* configure channel to parent clock / 4, irq off */
+ p->rate = clk_get_rate(p->clk) / 4;
+ sh_tmu_write(p, TCR, 0x0000);
+
+ /* enable channel */
+ sh_tmu_start_stop_ch(p, 1);
+
+ return 0;
+}
+
+static void sh_tmu_disable(struct sh_tmu_priv *p)
+{
+ /* disable channel */
+ sh_tmu_start_stop_ch(p, 0);
+
+ /* stop clock */
+ clk_disable(p->clk);
+}
+
+static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta,
+ int periodic)
+{
+ /* stop timer */
+ sh_tmu_start_stop_ch(p, 0);
+
+ /* acknowledge interrupt */
+ sh_tmu_read(p, TCR);
+
+ /* enable interrupt */
+ sh_tmu_write(p, TCR, 0x0020);
+
+ /* reload delta value in case of periodic timer */
+ if (periodic)
+ sh_tmu_write(p, TCOR, delta);
+ else
+ sh_tmu_write(p, TCOR, 0);
+
+ sh_tmu_write(p, TCNT, delta);
+
+ /* start timer */
+ sh_tmu_start_stop_ch(p, 1);
+}
+
+static irqreturn_t sh_tmu_interrupt(int irq, void *dev_id)
+{
+ struct sh_tmu_priv *p = dev_id;
+
+ /* disable or acknowledge interrupt */
+ if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT)
+ sh_tmu_write(p, TCR, 0x0000);
+ else
+ sh_tmu_write(p, TCR, 0x0020);
+
+ /* notify clockevent layer */
+ p->ced.event_handler(&p->ced);
+ return IRQ_HANDLED;
+}
+
+static struct sh_tmu_priv *cs_to_sh_tmu(struct clocksource *cs)
+{
+ return container_of(cs, struct sh_tmu_priv, cs);
+}
+
+static cycle_t sh_tmu_clocksource_read(struct clocksource *cs)
+{
+ struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
+
+ return sh_tmu_read(p, TCNT) ^ 0xffffffff;
+}
+
+static int sh_tmu_clocksource_enable(struct clocksource *cs)
+{
+ struct sh_tmu_priv *p = cs_to_sh_tmu(cs);
+ int ret;
+
+ ret = sh_tmu_enable(p);
+ if (ret)
+ return ret;
+
+ /* TODO: calculate good shift from rate and counter bit width */
+ cs->shift = 10;
+ cs->mult = clocksource_hz2mult(p->rate, cs->shift);
+ return 0;
+}
+
+static void sh_tmu_clocksource_disable(struct clocksource *cs)
+{
+ sh_tmu_disable(cs_to_sh_tmu(cs));
+}
+
+static int sh_tmu_register_clocksource(struct sh_tmu_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clocksource *cs = &p->cs;
+
+ cs->name = name;
+ cs->rating = rating;
+ cs->read = sh_tmu_clocksource_read;
+ cs->enable = sh_tmu_clocksource_enable;
+ cs->disable = sh_tmu_clocksource_disable;
+ cs->mask = CLOCKSOURCE_MASK(32);
+ cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ pr_info("sh_tmu: %s used as clock source\n", cs->name);
+ clocksource_register(cs);
+ return 0;
+}
+
+static struct sh_tmu_priv *ced_to_sh_tmu(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_tmu_priv, ced);
+}
+
+static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ sh_tmu_enable(p);
+
+ /* TODO: calculate good shift from rate and counter bit width */
+
+ ced->shift = 32;
+ ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
+ ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
+ ced->min_delta_ns = 5000;
+
+ if (periodic) {
+ p->periodic = (p->rate + HZ/2) / HZ;
+ sh_tmu_set_next(p, p->periodic, 1);
+ }
+}
+
+static void sh_tmu_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct sh_tmu_priv *p = ced_to_sh_tmu(ced);
+ int disabled = 0;
+
+ /* deal with old setting first */
+ switch (ced->mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ case CLOCK_EVT_MODE_ONESHOT:
+ sh_tmu_disable(p);
+ disabled = 1;
+ break;
+ default:
+ break;
+ }
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_info("sh_tmu: %s used for periodic clock events\n",
+ ced->name);
+ sh_tmu_clock_event_start(p, 1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ pr_info("sh_tmu: %s used for oneshot clock events\n",
+ ced->name);
+ sh_tmu_clock_event_start(p, 0);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ if (!disabled)
+ sh_tmu_disable(p);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ break;
+ }
+}
+
+static int sh_tmu_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct sh_tmu_priv *p = ced_to_sh_tmu(ced);
+
+ BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+
+ /* program new delta value */
+ sh_tmu_set_next(p, delta, 0);
+ return 0;
+}
+
+static void sh_tmu_register_clockevent(struct sh_tmu_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clock_event_device *ced = &p->ced;
+ int ret;
+
+ memset(ced, 0, sizeof(*ced));
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->features |= CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = rating;
+ ced->cpumask = cpumask_of(0);
+ ced->set_next_event = sh_tmu_clock_event_next;
+ ced->set_mode = sh_tmu_clock_event_mode;
+
+ ret = setup_irq(p->irqaction.irq, &p->irqaction);
+ if (ret) {
+ pr_err("sh_tmu: failed to request irq %d\n",
+ p->irqaction.irq);
+ return;
+ }
+
+ pr_info("sh_tmu: %s used for clock events\n", ced->name);
+ clockevents_register_device(ced);
+}
+
+static int sh_tmu_register(struct sh_tmu_priv *p, char *name,
+ unsigned long clockevent_rating,
+ unsigned long clocksource_rating)
+{
+ if (clockevent_rating)
+ sh_tmu_register_clockevent(p, name, clockevent_rating);
+ else if (clocksource_rating)
+ sh_tmu_register_clocksource(p, name, clocksource_rating);
+
+ return 0;
+}
+
+static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
+{
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ struct resource *res;
+ int irq, ret;
+ ret = -ENXIO;
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ if (!cfg) {
+ dev_err(&p->pdev->dev, "missing platform data\n");
+ goto err0;
+ }
+
+ platform_set_drvdata(pdev, p);
+
+ res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ goto err0;
+ }
+
+ irq = platform_get_irq(p->pdev, 0);
+ if (irq < 0) {
+ dev_err(&p->pdev->dev, "failed to get irq\n");
+ goto err0;
+ }
+
+ /* map memory, let mapbase point to our channel */
+ p->mapbase = ioremap_nocache(res->start, resource_size(res));
+ if (p->mapbase == NULL) {
+ pr_err("sh_tmu: failed to remap I/O memory\n");
+ goto err0;
+ }
+
+ /* setup data for setup_irq() (too early for request_irq()) */
+ p->irqaction.name = cfg->name;
+ p->irqaction.handler = sh_tmu_interrupt;
+ p->irqaction.dev_id = p;
+ p->irqaction.irq = irq;
+ p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+ p->irqaction.mask = CPU_MASK_NONE;
+
+ /* get hold of clock */
+ p->clk = clk_get(&p->pdev->dev, cfg->clk);
+ if (IS_ERR(p->clk)) {
+ pr_err("sh_tmu: cannot get clock \"%s\"\n", cfg->clk);
+ ret = PTR_ERR(p->clk);
+ goto err1;
+ }
+
+ return sh_tmu_register(p, cfg->name,
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ err1:
+ iounmap(p->mapbase);
+ err0:
+ return ret;
+}
+
+static int __devinit sh_tmu_probe(struct platform_device *pdev)
+{
+ struct sh_tmu_priv *p = platform_get_drvdata(pdev);
+ struct sh_timer_config *cfg = pdev->dev.platform_data;
+ int ret;
+
+ if (p) {
+ pr_info("sh_tmu: %s kept as earlytimer\n", cfg->name);
+ return 0;
+ }
+
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ ret = sh_tmu_setup(p, pdev);
+ if (ret) {
+ kfree(p);
+ platform_set_drvdata(pdev, NULL);
+ }
+ return ret;
+}
+
+static int __devexit sh_tmu_remove(struct platform_device *pdev)
+{
+ return -EBUSY; /* cannot unregister clockevent and clocksource */
+}
+
+static struct platform_driver sh_tmu_device_driver = {
+ .probe = sh_tmu_probe,
+ .remove = __devexit_p(sh_tmu_remove),
+ .driver = {
+ .name = "sh_tmu",
+ }
+};
+
+static int __init sh_tmu_init(void)
+{
+ return platform_driver_register(&sh_tmu_device_driver);
+}
+
+static void __exit sh_tmu_exit(void)
+{
+ platform_driver_unregister(&sh_tmu_device_driver);
+}
+
+early_platform_init("earlytimer", &sh_tmu_device_driver);
+module_init(sh_tmu_init);
+module_exit(sh_tmu_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH TMU Timer Driver");
+MODULE_LICENSE("GPL v2");
signed char cdf, cdfm;
int scgd, scgdm, scgds;
- mclk = clk_get(NULL, "module_clk");
+ mclk = clk_get(NULL, "peripheral_clk");
if (IS_ERR(mclk)) {
return PTR_ERR(mclk);
} else {
tristate "Generic RTC support"
# Please consider writing a new RTC driver instead of using the generic
# RTC abstraction
- depends on PARISC || M68K || PPC
+ depends on PARISC || M68K || PPC || SUPERH32
help
Say Y or M here to enable RTC support on systems using the generic
RTC abstraction. If you do not know what you are doing, you should
#include <linux/clk.h>
#include <linux/ctype.h>
#include <linux/err.h>
+#include <linux/list.h>
#ifdef CONFIG_SUPERH
#include <asm/clock.h>
#include <asm/sh_bios.h>
#endif
+#ifdef CONFIG_H8300
+#include <asm/gpio.h>
+#endif
+
#include "sh-sci.h"
struct sci_port {
int break_flag;
#ifdef CONFIG_HAVE_CLK
- /* Port clock */
- struct clk *clk;
+ /* Interface clock */
+ struct clk *iclk;
+ /* Data clock */
+ struct clk *dclk;
#endif
+ struct list_head node;
};
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
+struct sh_sci_priv {
+ spinlock_t lock;
+ struct list_head ports;
+
+#ifdef CONFIG_HAVE_CLK
+ struct notifier_block clk_nb;
#endif
+};
/* Function prototypes */
static void sci_stop_tx(struct uart_port *port);
status = sci_in(port, SCxSR);
} while (!(status & SCxSR_TDxE(port)));
- sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
sci_out(port, SCxTDR, c);
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
*mstpcrl &= ~mask;
}
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
{
h8300_sci_config(port, sci_enable);
}
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
{
h8300_sci_config(port, sci_disable);
}
int copied = 0;
unsigned short status = sci_in(port, SCxSR);
struct tty_struct *tty = port->info->port.tty;
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (uart_handle_break(port))
return 0;
static int sci_notifier(struct notifier_block *self,
unsigned long phase, void *p)
{
- int i;
+ struct sh_sci_priv *priv = container_of(self,
+ struct sh_sci_priv, clk_nb);
+ struct sci_port *sci_port;
+ unsigned long flags;
if ((phase == CPUFREQ_POSTCHANGE) ||
- (phase == CPUFREQ_RESUMECHANGE))
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *s = &sci_ports[i];
- s->port.uartclk = clk_get_rate(s->clk);
- }
+ (phase == CPUFREQ_RESUMECHANGE)) {
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(sci_port, &priv->ports, node)
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
return NOTIFY_OK;
}
-static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+static void sci_clk_enable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ clk_enable(sci_port->dclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+ if (sci_port->iclk)
+ clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ if (sci_port->iclk)
+ clk_disable(sci_port->iclk);
+
+ clk_disable(sci_port->dclk);
+}
#endif
static int sci_request_irq(struct sci_port *port)
static int sci_startup(struct uart_port *port)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (s->enable)
s->enable(port);
-#ifdef CONFIG_HAVE_CLK
- s->clk = clk_get(NULL, "module_clk");
-#endif
-
sci_request_irq(s);
sci_start_tx(port);
sci_start_rx(port, 1);
static void sci_shutdown(struct uart_port *port)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
sci_stop_rx(port);
sci_stop_tx(port);
if (s->disable)
s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
- clk_put(s->clk);
- s->clk = NULL;
-#endif
}
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
static void sci_config_port(struct uart_port *port, int flags)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
port->type = s->type;
- if (port->flags & UPF_IOREMAP && !port->membase) {
-#if defined(CONFIG_SUPERH64)
- port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
- port->membase = (void __iomem *)port->mapbase;
-#else
+ if (port->membase)
+ return;
+
+ if (port->flags & UPF_IOREMAP) {
port->membase = ioremap_nocache(port->mapbase, 0x40);
-#endif
- dev_err(port->dev, "can't remap port#%d\n", port->line);
+ if (IS_ERR(port->membase))
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
+ } else {
+ /*
+ * For the simple (and majority of) cases where we don't
+ * need to do any remapping, just cast the cookie
+ * directly.
+ */
+ port->membase = (void __iomem *)port->mapbase;
}
}
static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
{
- struct sci_port *s = &sci_ports[port->line];
+ struct sci_port *s = to_sci_port(port);
if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
return -EINVAL;
#endif
};
-static void __init sci_init_ports(void)
+static void __devinit sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port,
+ unsigned int index,
+ struct plat_sci_port *p)
{
- static int first = 1;
- int i;
-
- if (!first)
- return;
-
- first = 0;
-
- for (i = 0; i < SCI_NPORTS; i++) {
- sci_ports[i].port.ops = &sci_uart_ops;
- sci_ports[i].port.iotype = UPIO_MEM;
- sci_ports[i].port.line = i;
- sci_ports[i].port.fifosize = 1;
+ sci_port->port.ops = &sci_uart_ops;
+ sci_port->port.iotype = UPIO_MEM;
+ sci_port->port.line = index;
+ sci_port->port.fifosize = 1;
#if defined(__H8300H__) || defined(__H8300S__)
#ifdef __H8300S__
- sci_ports[i].enable = h8300_sci_enable;
- sci_ports[i].disable = h8300_sci_disable;
+ sci_port->enable = h8300_sci_enable;
+ sci_port->disable = h8300_sci_disable;
#endif
- sci_ports[i].port.uartclk = CONFIG_CPU_CLOCK;
+ sci_port->port.uartclk = CONFIG_CPU_CLOCK;
#elif defined(CONFIG_HAVE_CLK)
- /*
- * XXX: We should use a proper SCI/SCIF clock
- */
- {
- struct clk *clk = clk_get(NULL, "module_clk");
- sci_ports[i].port.uartclk = clk_get_rate(clk);
- clk_put(clk);
- }
+ sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+ sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+ sci_port->enable = sci_clk_enable;
+ sci_port->disable = sci_clk_disable;
#else
#error "Need a valid uartclk"
#endif
- sci_ports[i].break_timer.data = (unsigned long)&sci_ports[i];
- sci_ports[i].break_timer.function = sci_break_timer;
+ sci_port->break_timer.data = (unsigned long)sci_port;
+ sci_port->break_timer.function = sci_break_timer;
+ init_timer(&sci_port->break_timer);
- init_timer(&sci_ports[i].break_timer);
- }
-}
-
-int __init early_sci_setup(struct uart_port *port)
-{
- if (unlikely(port->line > SCI_NPORTS))
- return -ENODEV;
+ sci_port->port.mapbase = p->mapbase;
+ sci_port->port.membase = p->membase;
- sci_init_ports();
+ sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
+ sci_port->port.flags = p->flags;
+ sci_port->port.dev = &dev->dev;
+ sci_port->type = sci_port->port.type = p->type;
- sci_ports[port->line].port.membase = port->membase;
- sci_ports[port->line].port.mapbase = port->mapbase;
- sci_ports[port->line].port.type = port->type;
+ memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
- return 0;
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+ struct uart_driver *p = &sci_uart_driver;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+ sci_poll_put_char(port, ch);
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
static void serial_console_write(struct console *co, const char *s,
unsigned count)
{
- struct uart_port *port = &serial_console_port->port;
+ struct uart_port *port = co->data;
+ struct sci_port *sci_port = to_sci_port(port);
unsigned short bits;
- int i;
- for (i = 0; i < count; i++) {
- if (*s == 10)
- sci_poll_put_char(port, '\r');
+ if (sci_port->enable)
+ sci_port->enable(port);
- sci_poll_put_char(port, *s++);
- }
+ uart_console_write(port, s, count, serial_console_putchar);
/* wait until fifo is empty and last bit has been transmitted */
bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
+
+ if (sci_port->disable);
+ sci_port->disable(port);
}
static int __init serial_console_setup(struct console *co, char *options)
{
+ struct sci_port *sci_port;
struct uart_port *port;
int baud = 115200;
int bits = 8;
if (co->index >= SCI_NPORTS)
co->index = 0;
- serial_console_port = &sci_ports[co->index];
- port = &serial_console_port->port;
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+ co->data = port;
/*
* Also need to check port->type, we don't actually have any
*/
if (!port->type)
return -ENODEV;
- if (!port->membase || !port->mapbase)
- return -ENODEV;
-
- port->type = serial_console_port->type;
-
-#ifdef CONFIG_HAVE_CLK
- if (!serial_console_port->clk)
- serial_console_port->clk = clk_get(NULL, "module_clk");
-#endif
- if (port->flags & UPF_IOREMAP)
- sci_config_port(port, 0);
+ sci_config_port(port, 0);
- if (serial_console_port->enable)
- serial_console_port->enable(port);
+ if (sci_port->enable)
+ sci_port->enable(port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
if (ret == 0)
sci_stop_rx(port);
#endif
+ /* TODO: disable clock */
return ret;
}
static struct console serial_console = {
.name = "ttySC",
- .device = uart_console_device,
+ .device = serial_console_device,
.write = serial_console_write,
.setup = serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
- .data = &sci_uart_driver,
};
static int __init sci_console_init(void)
{
- sci_init_ports();
register_console(&serial_console);
return 0;
}
.cons = SCI_CONSOLE,
};
+
+static int sci_remove(struct platform_device *dev)
+{
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
+
+#ifdef CONFIG_HAVE_CLK
+ cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_remove_one_port(&sci_uart_driver, &p->port);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ kfree(priv);
+ return 0;
+}
+
+static int __devinit sci_probe_single(struct platform_device *dev,
+ unsigned int index,
+ struct plat_sci_port *p,
+ struct sci_port *sciport)
+{
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ unsigned long flags;
+ int ret;
+
+ /* Sanity check */
+ if (unlikely(index >= SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port "
+ "%d when only %d are available.\n",
+ index+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping "
+ "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ return 0;
+ }
+
+ sci_init_single(dev, sciport, index, p);
+
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret)
+ return ret;
+
+ INIT_LIST_HEAD(&sciport->node);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ list_add(&sciport->node, &priv->ports);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
/*
* Register a set of serial devices attached to a platform device. The
* list is terminated with a zero flags entry, which means we expect
static int __devinit sci_probe(struct platform_device *dev)
{
struct plat_sci_port *p = dev->dev.platform_data;
+ struct sh_sci_priv *priv;
int i, ret = -EINVAL;
- for (i = 0; p && p->flags != 0; p++, i++) {
- struct sci_port *sciport = &sci_ports[i];
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
- /* Sanity check */
- if (unlikely(i == SCI_NPORTS)) {
- dev_notice(&dev->dev, "Attempting to register port "
- "%d when only %d are available.\n",
- i+1, SCI_NPORTS);
- dev_notice(&dev->dev, "Consider bumping "
- "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
- break;
- }
+ INIT_LIST_HEAD(&priv->ports);
+ spin_lock_init(&priv->lock);
+ platform_set_drvdata(dev, priv);
- sciport->port.mapbase = p->mapbase;
+#ifdef CONFIG_HAVE_CLK
+ priv->clk_nb.notifier_call = sci_notifier;
+ cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
+#endif
- if (p->mapbase && !p->membase) {
- if (p->flags & UPF_IOREMAP) {
- p->membase = ioremap_nocache(p->mapbase, 0x40);
- if (IS_ERR(p->membase)) {
- ret = PTR_ERR(p->membase);
- goto err_unreg;
- }
- } else {
- /*
- * For the simple (and majority of) cases
- * where we don't need to do any remapping,
- * just cast the cookie directly.
- */
- p->membase = (void __iomem *)p->mapbase;
- }
+ if (dev->id != -1) {
+ ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
+ if (ret)
+ goto err_unreg;
+ } else {
+ for (i = 0; p && p->flags != 0; p++, i++) {
+ ret = sci_probe_single(dev, i, p, &sci_ports[i]);
+ if (ret)
+ goto err_unreg;
}
-
- sciport->port.membase = p->membase;
-
- sciport->port.irq = p->irqs[SCIx_TXI_IRQ];
- sciport->port.flags = p->flags;
- sciport->port.dev = &dev->dev;
-
- sciport->type = sciport->port.type = p->type;
-
- memcpy(&sciport->irqs, &p->irqs, sizeof(p->irqs));
-
- uart_add_one_port(&sci_uart_driver, &sciport->port);
}
-#ifdef CONFIG_HAVE_CLK
- cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
#ifdef CONFIG_SH_STANDARD_BIOS
sh_bios_gdb_detach();
#endif
return 0;
err_unreg:
- for (i = i - 1; i >= 0; i--)
- uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
+ sci_remove(dev);
return ret;
}
-static int __devexit sci_remove(struct platform_device *dev)
-{
- int i;
-
-#ifdef CONFIG_HAVE_CLK
- cpufreq_unregister_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
- for (i = 0; i < SCI_NPORTS; i++)
- uart_remove_one_port(&sci_uart_driver, &sci_ports[i].port);
-
- return 0;
-}
-
static int sci_suspend(struct platform_device *dev, pm_message_t state)
{
- int i;
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *p = &sci_ports[i];
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_suspend_port(&sci_uart_driver, &p->port);
- if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
- uart_suspend_port(&sci_uart_driver, &p->port);
- }
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int sci_resume(struct platform_device *dev)
{
- int i;
+ struct sh_sci_priv *priv = platform_get_drvdata(dev);
+ struct sci_port *p;
+ unsigned long flags;
- for (i = 0; i < SCI_NPORTS; i++) {
- struct sci_port *p = &sci_ports[i];
+ spin_lock_irqsave(&priv->lock, flags);
+ list_for_each_entry(p, &priv->ports, node)
+ uart_resume_port(&sci_uart_driver, &p->port);
- if (p->type != PORT_UNKNOWN && p->port.dev == &dev->dev)
- uart_resume_port(&sci_uart_driver, &p->port);
- }
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
printk(banner);
- sci_init_ports();
-
ret = uart_register_driver(&sci_uart_driver);
if (likely(ret == 0)) {
ret = platform_driver_register(&sci_driver);
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
} \
}
-#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
+#ifdef CONFIG_H8300
+/* h8300 don't have SCIF */
+#define CPU_SCIF_FNS(name) \
+ static inline unsigned int sci_##name##_in(struct uart_port *port) \
+ { \
+ return 0; \
+ } \
+ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+ { \
+ }
+#else
+#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
static inline unsigned int sci_##name##_in(struct uart_port *port) \
{ \
SCI_IN(scif_size, scif_offset); \
{ \
SCI_OUT(scif_size, scif_offset, value); \
}
+#endif
#define CPU_SCI_FNS(name, sci_offset, sci_size) \
static inline unsigned int sci_##name##_in(struct uart_port* port) \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
-#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIF_FNS(name)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+# define SCFSR 0x0010
+# define SCASSR 0x0014
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->type == PORT_SCIF)
+ return ctrl_inw((port->mapbase + SCFSR)) & SCIF_BRK ? 1 : 0;
+ if (port->type == PORT_SCIFA)
+ return ctrl_inw((port->mapbase + SCASSR)) & SCIF_BRK ? 1 : 0;
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
- return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+ return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
}
#elif defined(__H8300H__) || defined(__H8300S__)
static inline int sci_rxd_in(struct uart_port *port)
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
if (port->type == PORT_SCIF)
void __init register_intc_controller(struct intc_desc *desc)
{
- unsigned int i, k, smp;
+ unsigned int i, k, smp, cpu = smp_processor_id();
struct intc_desc_int *d;
d = alloc_bootmem(sizeof(*d));
/* register the vectors one by one */
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;
-
+ unsigned int irq = evt2irq(vect->vect);
+#ifdef CONFIG_SPARSE_IRQ
+ struct irq_desc *irq_desc;
+#endif
if (!vect->enum_id)
continue;
- intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect));
+#ifdef CONFIG_SPARSE_IRQ
+ irq_desc = irq_to_desc_alloc_cpu(irq, cpu);
+ if (unlikely(!irq_desc)) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
+ }
+#endif
+
+ intc_register_irq(desc, d, vect->enum_id, irq);
}
}
if (fb_get_options("hitfb", NULL))
return -ENODEV;
- hitfb_fix.mmio_start = CONFIG_HD64461_IOBASE+0x1000;
+ hitfb_fix.mmio_start = HD64461_IO_OFFSET(0x1000);
hitfb_fix.mmio_len = 0x1000;
- hitfb_fix.smem_start = CONFIG_HD64461_IOBASE + 0x02000000;
+ hitfb_fix.smem_start = HD64461_IO_OFFSET(0x02000000);
hitfb_fix.smem_len = 512 * 1024;
lcdclor = fb_readw(HD64461_LCDCLOR);
*/
static inline int clocksource_enable(struct clocksource *cs)
{
- return cs->enable ? cs->enable(cs) : 0;
+ int ret = 0;
+
+ if (cs->enable)
+ ret = cs->enable(cs);
+
+ /* save mult_orig on enable */
+ cs->mult_orig = cs->mult;
+
+ return ret;
}
/**
unsigned int irqs[SCIx_NR_IRQS]; /* ERI, RXI, TXI, BRI */
unsigned int type; /* SCI / SCIF / IRDA */
upf_t flags; /* UPF_* flags */
+ char *clk; /* clock string */
};
-int early_sci_setup(struct uart_port *port);
-
#endif /* __LINUX_SERIAL_SCI_H */
+++ /dev/null
-#ifndef __SH_CMT_H__
-#define __SH_CMT_H__
-
-struct sh_cmt_config {
- char *name;
- unsigned long channel_offset;
- int timer_bit;
- char *clk;
- unsigned long clockevent_rating;
- unsigned long clocksource_rating;
-};
-
-#endif /* __SH_CMT_H__ */
--- /dev/null
+#ifndef __SH_TIMER_H__
+#define __SH_TIMER_H__
+
+struct sh_timer_config {
+ char *name;
+ long channel_offset;
+ int timer_bit;
+ char *clk;
+ unsigned long clockevent_rating;
+ unsigned long clocksource_rating;
+};
+
+#endif /* __SH_TIMER_H__ */
#define CURRENT_TIME (current_kernel_time())
#define CURRENT_TIME_SEC ((struct timespec) { get_seconds(), 0 })
+/* Some architectures do not supply their own clocksource.
+ * This is mainly the case in architectures that get their
+ * inter-tick times by reading the counter on their interval
+ * timer. Since these timers wrap every tick, they're not really
+ * useful as clocksources. Wrapping them to act like one is possible
+ * but not very efficient. So we provide a callout these arches
+ * can implement for use with the jiffies clocksource to provide
+ * finer then tick granular time.
+ */
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+extern u32 arch_gettimeoffset(void);
+#else
+static inline u32 arch_gettimeoffset(void) { return 0; }
+#endif
+
extern void do_gettimeofday(struct timeval *tv);
extern int do_settimeofday(struct timespec *tv);
extern int do_sys_settimeofday(struct timespec *tv, struct timezone *tz);
unsigned long flags;
int ret;
- /* save mult_orig on registration */
- c->mult_orig = c->mult;
-
spin_lock_irqsave(&clocksource_lock, flags);
ret = clocksource_enqueue(c);
if (!ret)
clock->cycle_last = cycle_now;
nsec = cyc2ns(clock, cycle_delta);
+
+ /* If arch requires, add in gettimeoffset() */
+ nsec += arch_gettimeoffset();
+
timespec_add_ns(&xtime, nsec);
nsec = ((s64)cycle_delta * clock->mult_orig) >> clock->shift;
/* convert to nanoseconds: */
nsecs = cyc2ns(clock, cycle_delta);
+ /* If arch requires, add in gettimeoffset() */
+ nsecs += arch_gettimeoffset();
+
} while (read_seqretry(&xtime_lock, seq));
timespec_add_ns(ts, nsecs);
config SOUND_SH_DAC_AUDIO
tristate "SuperH DAC audio support"
- depends on CPU_SH3
+ depends on CPU_SH3 && HIGH_RES_TIMERS
config SOUND_SH_DAC_AUDIO_CHANNEL
int "DAC channel"
#include <linux/sound.h>
#include <linux/soundcard.h>
#include <linux/interrupt.h>
+#include <linux/hrtimer.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/delay.h>
#include <asm/clock.h>
-#include <asm/cpu/dac.h>
-#include <asm/cpu/timer.h>
+#include <cpu/dac.h>
#include <asm/machvec.h>
#include <mach/hp6xx.h>
#include <asm/hd64461.h>
#define MODNAME "sh_dac_audio"
-#define TMU_TOCR_INIT 0x00
-
-#define TMU1_TCR_INIT 0x0020 /* Clock/4, rising edge; interrupt on */
-#define TMU1_TSTR_INIT 0x02 /* Bit to turn on TMU1 */
-
#define BUFFER_SIZE 48000
static int rate;
static int empty;
static char *data_buffer, *buffer_begin, *buffer_end;
static int in_use, device_major;
+static struct hrtimer hrtimer;
+static ktime_t wakeups_per_second;
static void dac_audio_start_timer(void)
{
- u8 tstr;
-
- tstr = ctrl_inb(TMU_TSTR);
- tstr |= TMU1_TSTR_INIT;
- ctrl_outb(tstr, TMU_TSTR);
+ hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL);
}
static void dac_audio_stop_timer(void)
{
- u8 tstr;
-
- tstr = ctrl_inb(TMU_TSTR);
- tstr &= ~TMU1_TSTR_INIT;
- ctrl_outb(tstr, TMU_TSTR);
+ hrtimer_cancel(&hrtimer);
}
static void dac_audio_reset(void)
static void dac_audio_start(void)
{
if (mach_is_hp6xx()) {
- u16 v = inw(HD64461_GPADR);
+ u16 v = __raw_readw(HD64461_GPADR);
v &= ~HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
+ __raw_writew(v, HD64461_GPADR);
}
sh_dac_enable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
- ctrl_outw(TMU1_TCR_INIT, TMU1_TCR);
}
static void dac_audio_stop(void)
{
dac_audio_stop_timer();
if (mach_is_hp6xx()) {
- u16 v = inw(HD64461_GPADR);
+ u16 v = __raw_readw(HD64461_GPADR);
v |= HD64461_GPADR_SPEAKER;
- outw(v, HD64461_GPADR);
+ __raw_writew(v, HD64461_GPADR);
}
- sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
+ sh_dac_output(0, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
sh_dac_disable(CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
}
static void dac_audio_set_rate(void)
{
- unsigned long interval;
- struct clk *clk;
-
- clk = clk_get(NULL, "module_clk");
- interval = (clk_get_rate(clk) / 4) / rate;
- clk_put(clk);
- ctrl_outl(interval, TMU1_TCOR);
- ctrl_outl(interval, TMU1_TCNT);
+ wakeups_per_second = ktime_set(0, 1000000000 / rate);
}
static int dac_audio_ioctl(struct inode *inode, struct file *file,
.release = dac_audio_release,
};
-static irqreturn_t timer1_interrupt(int irq, void *dev)
+static enum hrtimer_restart sh_dac_audio_timer(struct hrtimer *handle)
{
- unsigned long timer_status;
-
- timer_status = ctrl_inw(TMU1_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU1_TCR);
-
if (!empty) {
sh_dac_output(*buffer_begin, CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL);
buffer_begin++;
if (buffer_begin == data_buffer + BUFFER_SIZE)
buffer_begin = data_buffer;
- if (buffer_begin == buffer_end) {
+ if (buffer_begin == buffer_end)
empty = 1;
- dac_audio_stop_timer();
- }
}
- return IRQ_HANDLED;
+
+ if (!empty)
+ hrtimer_start(&hrtimer, wakeups_per_second, HRTIMER_MODE_REL);
+
+ return HRTIMER_NORESTART;
}
static int __init dac_audio_init(void)
{
- int retval;
-
if ((device_major = register_sound_dsp(&dac_audio_fops, -1)) < 0) {
printk(KERN_ERR "Cannot register dsp device");
return device_major;
rate = 8000;
dac_audio_set_rate();
- retval =
- request_irq(TIMER1_IRQ, timer1_interrupt, IRQF_DISABLED, MODNAME, 0);
- if (retval < 0) {
- printk(KERN_ERR "sh_dac_audio: IRQ %d request failed\n",
- TIMER1_IRQ);
- return retval;
- }
+ /* Today: High Resolution Timer driven DAC playback.
+ * The timer callback gets called once per sample. Ouch.
+ *
+ * Future: A much better approach would be to use the
+ * SH7720 CMT+DMAC+DAC hardware combination like this:
+ * - Program sample rate using CMT0 or CMT1
+ * - Program DMAC to use CMT for timing and output to DAC
+ * - Play sound using DMAC, let CPU sleep.
+ * - While at it, rewrite this driver to use ALSA.
+ */
+
+ hrtimer_init(&hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ hrtimer.function = sh_dac_audio_timer;
return 0;
}
static void __exit dac_audio_exit(void)
{
- free_irq(TIMER1_IRQ, 0);
-
unregister_sound_dsp(device_major);
kfree((void *)data_buffer);
}