net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
authorJohan Hovold <johan@kernel.org>
Tue, 23 Dec 2014 11:59:17 +0000 (12:59 +0100)
committerDavid S. Miller <davem@davemloft.net>
Fri, 26 Dec 2014 21:19:50 +0000 (16:19 -0500)
Use generic config_init callback also for KSZ8021 and KSZ8031.

This has been avoided this far due to commit b838b4aced99 ("phy/micrel:
KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY
becomes unresponsive if the broadcast-disable flag is set before
configuring the clock mode.

Turns out that the problem seemingly worked-around by the above
mentioned commit was really due to a hardware-configuration issue, where
the PHY was in fact strapped to address 3 rather than 0.

Tested-by: Bruno Thomsen <bth@kamstrup.dk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/micrel.c

index c530de1e63f5d5eb5bf0ee6e12a7cb25cded50bb..3ad8ca76196d8254afd41359a437a7716defeecb 100644 (file)
@@ -88,6 +88,7 @@ struct kszphy_priv {
 
 static const struct kszphy_type ksz8021_type = {
        .led_mode_reg           = MII_KSZPHY_CTRL_2,
+       .has_broadcast_disable  = true,
        .has_rmii_ref_clk_sel   = true,
 };
 
@@ -258,19 +259,6 @@ static int kszphy_config_init(struct phy_device *phydev)
        return 0;
 }
 
-static int ksz8021_config_init(struct phy_device *phydev)
-{
-       int rc;
-
-       rc = kszphy_config_init(phydev);
-       if (rc)
-               return rc;
-
-       rc = kszphy_broadcast_disable(phydev);
-
-       return rc < 0 ? rc : 0;
-}
-
 static int ksz9021_load_values_from_of(struct phy_device *phydev,
                                       struct device_node *of_node, u16 reg,
                                       char *field1, char *field2,
@@ -584,7 +572,7 @@ static struct phy_driver ksphy_driver[] = {
        .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
        .driver_data    = &ksz8021_type,
        .probe          = kszphy_probe,
-       .config_init    = ksz8021_config_init,
+       .config_init    = kszphy_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .ack_interrupt  = kszphy_ack_interrupt,
@@ -601,7 +589,7 @@ static struct phy_driver ksphy_driver[] = {
        .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
        .driver_data    = &ksz8021_type,
        .probe          = kszphy_probe,
-       .config_init    = ksz8021_config_init,
+       .config_init    = kszphy_config_init,
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .ack_interrupt  = kszphy_ack_interrupt,