#include <plat/control.h>
#include <plat/tc.h>
#include <plat/board.h>
-#include <plat/mux.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
{
.start = INT_24XX_MAIL_U0_MPU,
.flags = IORESOURCE_IRQ,
+ .name = "dsp",
},
{
.start = INT_24XX_MAIL_U3_MPU,
.flags = IORESOURCE_IRQ,
+ .name = "iva",
},
};
static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
{
.start = INT_24XX_MAIL_U0_MPU,
.flags = IORESOURCE_IRQ,
+ .name = "dsp",
},
};
static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
{
.start = OMAP44XX_IRQ_MAIL_U0,
.flags = IORESOURCE_IRQ,
+ .name = "mbox",
},
};
static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
#endif
static struct platform_device mbox_device = {
- .name = "omap2-mailbox",
+ .name = "omap-mailbox",
.id = -1,
};
static inline void omap_init_mbox(void) { }
#endif /* CONFIG_OMAP_MBOX_FWK */
-#if defined(CONFIG_OMAP_STI)
-
-#if defined(CONFIG_ARCH_OMAP2)
-
-#define OMAP2_STI_BASE 0x48068000
-#define OMAP2_STI_CHANNEL_BASE 0x54000000
-#define OMAP2_STI_IRQ 4
-
-static struct resource sti_resources[] = {
- {
- .start = OMAP2_STI_BASE,
- .end = OMAP2_STI_BASE + 0x7ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_STI_CHANNEL_BASE,
- .end = OMAP2_STI_CHANNEL_BASE + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP2_STI_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-#elif defined(CONFIG_ARCH_OMAP3)
-
-#define OMAP3_SDTI_BASE 0x54500000
-#define OMAP3_SDTI_CHANNEL_BASE 0x54600000
-
-static struct resource sti_resources[] = {
- {
- .start = OMAP3_SDTI_BASE,
- .end = OMAP3_SDTI_BASE + 0xFFF,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP3_SDTI_CHANNEL_BASE,
- .end = OMAP3_SDTI_CHANNEL_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-#endif
-
-static struct platform_device sti_device = {
- .name = "sti",
- .id = -1,
- .num_resources = ARRAY_SIZE(sti_resources),
- .resource = sti_resources,
-};
-
-static inline void omap_init_sti(void)
-{
- platform_device_register(&sti_device);
-}
-#else
static inline void omap_init_sti(void) {}
-#endif
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap2420() && controller_nr == 0) {
- omap_cfg_reg(H18_24XX_MMC_CMD);
- omap_cfg_reg(H15_24XX_MMC_CLKI);
- omap_cfg_reg(G19_24XX_MMC_CLKO);
- omap_cfg_reg(F20_24XX_MMC_DAT0);
- omap_cfg_reg(F19_24XX_MMC_DAT_DIR0);
- omap_cfg_reg(G18_24XX_MMC_CMD_DIR);
+ omap_mux_init_signal("sdmmc_cmd", 0);
+ omap_mux_init_signal("sdmmc_clki", 0);
+ omap_mux_init_signal("sdmmc_clko", 0);
+ omap_mux_init_signal("sdmmc_dat0", 0);
+ omap_mux_init_signal("sdmmc_dat_dir0", 0);
+ omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].wires == 4) {
- omap_cfg_reg(H14_24XX_MMC_DAT1);
- omap_cfg_reg(E19_24XX_MMC_DAT2);
- omap_cfg_reg(D19_24XX_MMC_DAT3);
- omap_cfg_reg(E20_24XX_MMC_DAT_DIR1);
- omap_cfg_reg(F18_24XX_MMC_DAT_DIR2);
- omap_cfg_reg(E18_24XX_MMC_DAT_DIR3);
+ omap_mux_init_signal("sdmmc_dat1", 0);
+ omap_mux_init_signal("sdmmc_dat2", 0);
+ omap_mux_init_signal("sdmmc_dat3", 0);
+ omap_mux_init_signal("sdmmc_dat_dir1", 0);
+ omap_mux_init_signal("sdmmc_dat_dir2", 0);
+ omap_mux_init_signal("sdmmc_dat_dir3", 0);
}
/*
if ARCH_OMAP
-menu "TI OMAP Implementations"
+menu "TI OMAP Common Features"
config ARCH_OMAP_OTG
bool
help
"Systems based on omap24xx, omap34xx or omap44xx"
-config ARCH_OMAP2
- bool "TI OMAP2"
- depends on ARCH_OMAP2PLUS
- select CPU_V6
-
-config ARCH_OMAP3
- bool "TI OMAP3"
- depends on ARCH_OMAP2PLUS
- select CPU_V7
- select USB_ARCH_HAS_EHCI
- select ARM_L1_CACHE_SHIFT_6
-
-config ARCH_OMAP4
- bool "TI OMAP4"
- depends on ARCH_OMAP2PLUS
- select CPU_V7
- select ARM_GIC
-
endchoice
comment "OMAP Feature Selections"
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
- default y if LEDS || LEDS_OMAP_DEBUG
+ default y if LEDS
config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot"
Say Y here if you want to use OMAP Mailbox framework support for
DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+ config OMAP_MBOX_KFIFO_SIZE
+ int "Mailbox kfifo default buffer size (bytes)"
+ depends on OMAP_MBOX_FWK
+ default 256
+ help
+ Specify the default size of mailbox's kfifo buffers (bytes).
+ This can also be changed at runtime (via the mbox_kfifo_size
+ module parameter).
+
config OMAP_IOMMU
tristate
choice
prompt "System timer"
- default OMAP_MPU_TIMER
+ default OMAP_32K_TIMER if !ARCH_OMAP15XX
config OMAP_MPU_TIMER
bool "Use mpu timer"