nand: omap2: Replace pr_err with dev_err

Usage of pr_err is frowned upon, so replace it with dev_err.

Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index f97a4ffd489ddf8d1beb36355e628051c97418f5..3b357e920a0c03e187a71f7cab67cb66b373122e 100644 (file)
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1375,7 +1375,7 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
                erased_ecc_vec = bch16_vector;
                break;
        default:
-               pr_err("invalid driver configuration\n");
+               dev_err(&info->pdev->dev, "invalid driver configuration\n");
                return -EINVAL;
        }
 
@@ -1446,7 +1446,8 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
        err = 0;
        for (i = 0; i < eccsteps; i++) {
                if (err_vec[i].error_uncorrectable) {
-                       pr_err("nand: uncorrectable bit-flips found\n");
+                       dev_err(&info->pdev->dev,
+                               "uncorrectable bit-flips found\n");
                        err = -EBADMSG;
                } else if (err_vec[i].error_reported) {
                        for (j = 0; j < err_vec[i].error_count; j++) {
@@ -1483,8 +1484,9 @@ static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
                                                        1 << bit_pos;
                                        }
                                } else {
-                                       pr_err("invalid bit-flip @ %d:%d\n",
-                                                        byte_pos, bit_pos);
+                                       dev_err(&info->pdev->dev,
+                                               "invalid bit-flip @ %d:%d\n",
+                                               byte_pos, bit_pos);
                                        err = -EBADMSG;
                                }
                        }
@@ -1598,13 +1600,13 @@ static bool is_elm_present(struct omap_nand_info *info,
 
        /* check whether elm-id is passed via DT */
        if (!elm_node) {
-               pr_err("nand: error: ELM DT node not found\n");
+               dev_err(&info->pdev->dev, "ELM devicetree node not found\n");
                return false;
        }
        pdev = of_find_device_by_node(elm_node);
        /* check whether ELM device is registered */
        if (!pdev) {
-               pr_err("nand: error: ELM device not found\n");
+               dev_err(&info->pdev->dev, "ELM device not found\n");
                return false;
        }
        /* ELM module available, now configure it */
@@ -1734,14 +1736,14 @@ static int omap_nand_probe(struct platform_device *pdev)
        /* scan NAND device connected to chip controller */
        nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
        if (nand_scan_ident(mtd, 1, NULL)) {
-               pr_err("nand device scan failed, may be bus-width mismatch\n");
+               dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n");
                err = -ENXIO;
                goto return_error;
        }
 
        /* check for small page devices */
        if ((mtd->oobsize < 64) && (pdata->ecc_opt != OMAP_ECC_HAM1_CODE_HW)) {
-               pr_err("small page devices are not supported\n");
+               dev_err(&info->pdev->dev, "small page devices are not supported\n");
                err = -EINVAL;
                goto return_error;
        }
@@ -1896,8 +1898,9 @@ static int omap_nand_probe(struct platform_device *pdev)
                                                        nand_chip->ecc.bytes,
                                                        &ecclayout);
                if (!nand_chip->ecc.priv) {
-                       pr_err("nand: error: unable to use s/w BCH library\n");
+                       dev_err(&info->pdev->dev, "unable to use BCH library\n");
                        err = -EINVAL;
+                       goto return_error;
                }
                break;
 
@@ -1959,7 +1962,7 @@ static int omap_nand_probe(struct platform_device *pdev)
                                                        nand_chip->ecc.bytes,
                                                        &ecclayout);
                if (!nand_chip->ecc.priv) {
-                       pr_err("nand: error: unable to use s/w BCH library\n");
+                       dev_err(&info->pdev->dev, "unable to use BCH library\n");
                        err = -EINVAL;
                        goto return_error;
                }
@@ -2026,7 +2029,7 @@ static int omap_nand_probe(struct platform_device *pdev)
                                ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
                break;
        default:
-               pr_err("nand: error: invalid or unsupported ECC scheme\n");
+               dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n");
                err = -EINVAL;
                goto return_error;
        }
@@ -2038,8 +2041,9 @@ static int omap_nand_probe(struct platform_device *pdev)
        ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
        /* check if NAND device's OOB is enough to store ECC signatures */
        if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
-               pr_err("not enough OOB bytes required = %d, available=%d\n",
-                                          ecclayout->eccbytes, mtd->oobsize);
+               dev_err(&info->pdev->dev,
+                       "not enough OOB bytes required = %d, available=%d\n",
+                       ecclayout->eccbytes, mtd->oobsize);
                err = -EINVAL;
                goto return_error;
        }