[SCSI] 3ware 9000: handle use_sg != 0 for emulated commands
authoradam radford <aradford@gmail.com>
Fri, 9 Sep 2005 22:55:13 +0000 (15:55 -0700)
committerJames Bottomley <jejb@mulgrave.(none)>
Fri, 9 Sep 2005 23:11:16 +0000 (18:11 -0500)
The attached patch updates the driver for the 3ware 9000 series to do
the following:

- Correctly handle single sgl's with use_sg = 1.

This is needed with the latest scsi-block-2.6 merge otherwise the 3w-9xxx
driver will not work.  I tested the patch James sent a few weeks back to fix
this, and it had a bug where the request_buffer was accessed in
twa_scsiop_execute_scsi_complete() when it was invalid.  This is a corrected
variation of that patch.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/3w-9xxx.c

index bc6e4627c7a1e450b097b9a117e01e03e667f293..a6ac61611f35296c2a1d4402940075d10e38dc0a 100644 (file)
@@ -59,6 +59,7 @@
                  Fix 'handled=1' ISR usage, remove bogus IRQ check.
                  Remove un-needed eh_abort handler.
                  Add support for embedded firmware error strings.
+   2.26.02.003 - Correctly handle single sgl's with use_sg=1.
 */
 
 #include <linux/module.h>
@@ -81,7 +82,7 @@
 #include "3w-9xxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "2.26.02.002"
+#define TW_DRIVER_VERSION "2.26.02.003"
 static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
 static unsigned int twa_device_extension_count;
 static int twa_major = -1;
@@ -1805,6 +1806,8 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
                        if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH) {
                                command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
                                command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
+                               if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)
+                                       memcpy(tw_dev->generic_buffer_virt[request_id], tw_dev->srb[request_id]->request_buffer, tw_dev->srb[request_id]->request_bufflen);
                        } else {
                                buffaddr = twa_map_scsi_single_data(tw_dev, request_id);
                                if (buffaddr == 0)
@@ -1823,6 +1826,12 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
 
                if (tw_dev->srb[request_id]->use_sg > 0) {
                        if ((tw_dev->srb[request_id]->use_sg == 1) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
+                               if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL) {
+                                       struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
+                                       char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+                                       memcpy(tw_dev->generic_buffer_virt[request_id], buf, sg->length);
+                                       kunmap_atomic(buf - sg->offset, KM_IRQ0);
+                               }
                                command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
                                command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
                        } else {
@@ -1888,11 +1897,20 @@ out:
 /* This function completes an execute scsi operation */
 static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id)
 {
-       /* Copy the response if too small */
-       if ((tw_dev->srb[request_id]->request_buffer) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
-               memcpy(tw_dev->srb[request_id]->request_buffer,
-                      tw_dev->generic_buffer_virt[request_id],
-                      tw_dev->srb[request_id]->request_bufflen);
+       if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH &&
+           (tw_dev->srb[request_id]->sc_data_direction == DMA_FROM_DEVICE ||
+            tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)) {
+               if (tw_dev->srb[request_id]->use_sg == 0) {
+                       memcpy(tw_dev->srb[request_id]->request_buffer,
+                              tw_dev->generic_buffer_virt[request_id],
+                              tw_dev->srb[request_id]->request_bufflen);
+               }
+               if (tw_dev->srb[request_id]->use_sg == 1) {
+                       struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
+                       char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+                       memcpy(buf, tw_dev->generic_buffer_virt[request_id], sg->length);
+                       kunmap_atomic(buf - sg->offset, KM_IRQ0);
+               }
        }
 } /* End twa_scsiop_execute_scsi_complete() */