ARM: dts: add Vbus regulator for USB 3.0 on exynos5800-peach-pi
authorVivek Gautam <gautam.vivek@samsung.com>
Mon, 19 May 2014 13:32:11 +0000 (22:32 +0900)
committerKukjin Kim <kgene.kim@samsung.com>
Fri, 30 May 2014 17:09:16 +0000 (02:09 +0900)
Add required fixed-regulator for VBUS supply for USB 3.0
controller phy.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
arch/arm/boot/dts/exynos5800-peach-pi.dts

index 05ae280272666b4c2ddad47ed1c97acb06bf2580..e910de3effacd8583ec6f84fd1e2d00967442850 100644 (file)
                pinctrl-0 = <&pwm0_out>;
                pinctrl-names = "default";
        };
+
+       usb300_vbus_reg: regulator-usb300 {
+               compatible = "regulator-fixed";
+               regulator-name = "P5.0V_USB3CON0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gph0 0 0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb300_vbus_en>;
+               enable-active-high;
+       };
+
+       usb301_vbus_reg: regulator-usb301 {
+               compatible = "regulator-fixed";
+               regulator-name = "P5.0V_USB3CON1";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gph0 1 0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb301_vbus_en>;
+               enable-active-high;
+       };
 };
 
 &pinctrl_0 {
        };
 };
 
+&pinctrl_3 {
+       usb300_vbus_en: usb300-vbus-en {
+               samsung,pins = "gph0-0";
+               samsung,pin-function = <1>;
+               samsung,pin-pud = <0>;
+               samsung,pin-drv = <0>;
+       };
+
+       usb301_vbus_en: usb301-vbus-en {
+               samsung,pins = "gph0-1";
+               samsung,pin-function = <1>;
+               samsung,pin-pud = <0>;
+               samsung,pin-drv = <0>;
+       };
+};
+
 &rtc {
        status = "okay";
 };
        ddc = <&i2c_2>;
 };
 
+&usbdrd3_0 {
+       vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd3_1 {
+       vbus-supply = <&usb301_vbus_reg>;
+};
+
 /*
  * Use longest HW watchdog in SoC (32 seconds) since the hardware
  * watchdog provides no debugging information (compared to soft/hard