--- /dev/null
+Add a new UART I/O type for slow busses such as the ixp4xx expansion bus
+--- a/include/linux/serial_8250.h
++++ b/include/linux/serial_8250.h
+@@ -27,6 +27,7 @@ struct plat_serial8250_port {
+ void *private_data;
+ unsigned char regshift; /* register shift */
+ unsigned char iotype; /* UPIO_* */
++ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
+ unsigned char hub6;
+ upf_t flags; /* UPF_* flags */
+ unsigned int type; /* If UPF_FIXED_TYPE */
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -324,6 +324,7 @@ struct uart_port {
+ #define UPIO_AU (4) /* Au1x00 type IO */
+ #define UPIO_TSI (5) /* Tsi108/109 type IO */
+ #define UPIO_RM9000 (6) /* RM9000 type IO */
++#define UPIO_MEM_DELAY (7)
+
+ unsigned int read_status_mask; /* driver specific */
+ unsigned int ignore_status_mask; /* driver specific */
+@@ -368,6 +369,7 @@ struct uart_port {
+
+ unsigned int mctrl; /* current modem ctrl settings */
+ unsigned int timeout; /* character-based timeout */
++ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
+ unsigned int type; /* port type */
+ const struct uart_ops *ops;
+ unsigned int custom_divisor;
+--- a/drivers/tty/serial/8250/8250.c
++++ b/drivers/tty/serial/8250/8250.c
+@@ -400,6 +400,20 @@ static void mem_serial_out(struct uart_p
+ writeb(value, p->membase + offset);
+ }
+
++static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)p;
++ udelay(up->port.rw_delay);
++ return mem_serial_in(p, offset);
++}
++
++static void memdelay_serial_out(struct uart_port *p, int offset, int value)
++{
++ struct uart_8250_port *up = (struct uart_8250_port *)p;
++ udelay(up->port.rw_delay);
++ mem_serial_out(p, offset, value);
++}
++
+ static void mem32_serial_out(struct uart_port *p, int offset, int value)
+ {
+ offset = map_8250_out_reg(p, offset) << p->regshift;
+@@ -459,6 +473,11 @@ static void set_io_from_upio(struct uart
+ p->serial_out = mem32_serial_out;
+ break;
+
++ case UPIO_MEM_DELAY:
++ p->serial_in = memdelay_serial_in;
++ p->serial_out = memdelay_serial_out;
++ break;
++
+ case UPIO_AU:
+ p->serial_in = au_serial_in;
+ p->serial_out = au_serial_out;
+@@ -481,6 +500,7 @@ serial_out_sync(struct uart_8250_port *u
+ switch (p->iotype) {
+ case UPIO_MEM:
+ case UPIO_MEM32:
++ case UPIO_MEM_DELAY:
+ case UPIO_AU:
+ p->serial_out(p, offset, value);
+ p->serial_in(p, UART_LCR); /* safe, no side-effects */
+@@ -2498,6 +2518,7 @@ static int serial8250_request_std_resour
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
++ case UPIO_MEM_DELAY:
+ if (!up->port.mapbase)
+ break;
+
+@@ -2534,6 +2555,7 @@ static void serial8250_release_std_resou
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM:
++ case UPIO_MEM_DELAY:
+ if (!up->port.mapbase)
+ break;
+
+@@ -3050,6 +3072,7 @@ static int __devinit serial8250_probe(st
+ port.set_termios = p->set_termios;
+ port.pm = p->pm;
+ port.dev = &dev->dev;
++ port.rw_delay = p->rw_delay;
+ port.irqflags |= irqflag;
+ ret = serial8250_register_port(&port);
+ if (ret < 0) {
+@@ -3199,6 +3222,7 @@ int serial8250_register_port(struct uart
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
++ uart->port.rw_delay = port->rw_delay;
+ uart->port.private_data = port->private_data;
+ if (port->dev)
+ uart->port.dev = port->dev;
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -2021,6 +2021,7 @@ uart_report_port(struct uart_driver *drv
+ snprintf(address, sizeof(address),
+ "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
+ break;
++ case UPIO_MEM_DELAY:
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
+@@ -2435,6 +2436,7 @@ int uart_match_port(struct uart_port *po
+ case UPIO_HUB6:
+ return (port1->iobase == port2->iobase) &&
+ (port1->hub6 == port2->hub6);
++ case UPIO_MEM_DELAY:
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_AU:
platform_device_register(&cambria_npec_device);
platform_device_register(&cambria_npea_device);
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -27,6 +27,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
-+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -324,6 +324,7 @@ struct uart_port {
- #define UPIO_AU (4) /* Au1x00 type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- #define UPIO_RM9000 (6) /* RM9000 type IO */
-+#define UPIO_MEM_DELAY (7)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
-@@ -368,6 +369,7 @@ struct uart_port {
-
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
-+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
---- a/drivers/tty/serial/8250/8250.c
-+++ b/drivers/tty/serial/8250/8250.c
-@@ -400,6 +400,20 @@ static void mem_serial_out(struct uart_p
- writeb(value, p->membase + offset);
- }
-
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -459,6 +473,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
-+ case UPIO_MEM_DELAY:
-+ p->serial_in = memdelay_serial_in;
-+ p->serial_out = memdelay_serial_out;
-+ break;
-+
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
-@@ -481,6 +500,7 @@ serial_out_sync(struct uart_8250_port *u
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
-+ case UPIO_MEM_DELAY:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
-@@ -2498,6 +2518,7 @@ static int serial8250_request_std_resour
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -2534,6 +2555,7 @@ static void serial8250_release_std_resou
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!up->port.mapbase)
- break;
-
-@@ -3050,6 +3072,7 @@ static int __devinit serial8250_probe(st
- port.set_termios = p->set_termios;
- port.pm = p->pm;
- port.dev = &dev->dev;
-+ port.rw_delay = p->rw_delay;
- port.irqflags |= irqflag;
- ret = serial8250_register_port(&port);
- if (ret < 0) {
-@@ -3199,6 +3222,7 @@ int serial8250_register_port(struct uart
- uart->port.iotype = port->iotype;
- uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
- uart->port.mapbase = port->mapbase;
-+ uart->port.rw_delay = port->rw_delay;
- uart->port.private_data = port->private_data;
- if (port->dev)
- uart->port.dev = port->dev;
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -2021,6 +2021,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
-@@ -2435,6 +2436,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
projects / lede.git / commitdiff