- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
-IXP2000
- - Release Notes for Linux on Intel's IXP2000 Network Processor
msm
- MSM specific documentation
Netwinder
+++ /dev/null
-
--------------------------------------------------------------------------
-Release Notes for Linux on Intel's IXP2000 Network Processor
-
-Maintained by Deepak Saxena <dsaxena@plexity.net>
--------------------------------------------------------------------------
-
-1. Overview
-
-Intel's IXP2000 family of NPUs (IXP2400, IXP2800, IXP2850) is designed
-for high-performance network applications such high-availability
-telecom systems. In addition to an XScale core, it contains up to 8
-"MicroEngines" that run special code, several high-end networking
-interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
-flash interface, and some other odds and ends. For more information, see:
-
-http://developer.intel.com
-
-2. Linux Support
-
-Linux currently supports the following features on the IXP2000 NPUs:
-
-- On-chip serial
-- PCI
-- Flash (MTD/JFFS2)
-- I2C through GPIO
-- Timers (watchdog, OS)
-
-That is about all we can support under Linux ATM b/c the core networking
-components of the chip are accessed via Intel's closed source SDK.
-Please contact Intel directly on issues with using those. There is
-also a mailing list run by some folks at Princeton University that might
-be of help: https://lists.cs.princeton.edu/mailman/listinfo/ixp2xxx
-
-WHATEVER YOU DO, DO NOT POST EMAIL TO THE LINUX-ARM OR LINUX-ARM-KERNEL
-MAILING LISTS REGARDING THE INTEL SDK.
-
-3. Supported Platforms
-
-- Intel IXDP2400 Reference Platform
-- Intel IXDP2800 Reference Platform
-- Intel IXDP2401 Reference Platform
-- Intel IXDP2801 Reference Platform
-- RadiSys ENP-2611
-
-4. Usage Notes
-
-- The IXP2000 platforms usually have rather complex PCI bus topologies
- with large memory space requirements. In addition, b/c of the way the
- Intel SDK is designed, devices are enumerated in a very specific
- way. B/c of this this, we use "pci=firmware" option in the kernel
- command line so that we do not re-enumerate the bus.
-
-- IXDP2x01 systems have variable clock tick rates that we cannot determine
- via HW registers. The "ixdp2x01_clk=XXX" cmd line options allow you
- to pass the clock rate to the board port.
-
-5. Thanks
-
-The IXP2000 work has been funded by Intel Corp. and MontaVista Software, Inc.
-
-The following people have contributed patches/comments/etc:
-
-Naeem F. Afzal
-Lennert Buytenhek
-Jeffrey Daly
-
--------------------------------------------------------------------------
-Last Update: 8/09/2004
F: drivers/amba/
F: include/linux/amba/bus.h
-ARM/ADI ROADRUNNER MACHINE SUPPORT
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-ixp23xx/
-F: arch/arm/mach-ixp23xx/include/mach/
-
ARM/ADS SPHERE MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/INTEL IXP2000 ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/INTEL IXDP2850 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-ARM/INTEL IXP23XX ARM ARCHITECTURE
-M: Lennert Buytenhek <kernel@wantstofly.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Imre Kaloz <kaloz@openwrt.org>
M: Krzysztof Halasa <khc@pm.waw.pl>
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
help
- This enables support for systems based on the Atmel AT91RM9200,
- AT91SAM9 processors.
+ This enables support for systems based on Atmel
+ AT91RM9200 and AT91SAM9* processors.
config ARCH_BCMRING
bool "Broadcom BCMRING"
help
Support for Intel's IOP33X (XScale) family of processors.
-config ARCH_IXP23XX
- bool "IXP23XX-based"
- depends on MMU
- select CPU_XSC3
- select PCI
- select ARCH_USES_GETTIMEOFFSET
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- help
- Support for Intel's IXP23xx (XScale) family of processors.
-
-config ARCH_IXP2000
- bool "IXP2400/2800-based"
- depends on MMU
- select CPU_XSCALE
- select PCI
- select ARCH_USES_GETTIMEOFFSET
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- help
- Support for Intel's IXP2400/2800 (XScale) family of processors.
-
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
source "arch/arm/mach-ixp4xx/Kconfig"
-source "arch/arm/mach-ixp2000/Kconfig"
-
-source "arch/arm/mach-ixp23xx/Kconfig"
-
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
machine-$(CONFIG_ARCH_IOP33X) := iop33x
-machine-$(CONFIG_ARCH_IXP2000) := ixp2000
-machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
-#ifdef CONFIG_ARCH_IXP2000
- mov r1, #-1
- mov r0, #0xd6000000
- str r1, [r0, #0x14]
- str r1, [r0, #0x18]
-#endif
-
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
-obj-$(CONFIG_ARCH_IXP2000) += uengine.o
-obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
+++ /dev/null
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/uengine.h>
-
-#if defined(CONFIG_ARCH_IXP2000)
-#define IXP_UENGINE_CSR_VIRT_BASE IXP2000_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID IXP2000_PRODUCT_ID
-#define IXP_MISC_CONTROL IXP2000_MISC_CONTROL
-#define IXP_RESET1 IXP2000_RESET1
-#else
-#if defined(CONFIG_ARCH_IXP23XX)
-#define IXP_UENGINE_CSR_VIRT_BASE IXP23XX_UENGINE_CSR_VIRT_BASE
-#define IXP_PRODUCT_ID IXP23XX_PRODUCT_ID
-#define IXP_MISC_CONTROL IXP23XX_MISC_CONTROL
-#define IXP_RESET1 IXP23XX_RESET1
-#else
-#error unknown platform
-#endif
-#endif
-
-#define USTORE_ADDRESS 0x000
-#define USTORE_DATA_LOWER 0x004
-#define USTORE_DATA_UPPER 0x008
-#define CTX_ENABLES 0x018
-#define CC_ENABLE 0x01c
-#define CSR_CTX_POINTER 0x020
-#define INDIRECT_CTX_STS 0x040
-#define ACTIVE_CTX_STS 0x044
-#define INDIRECT_CTX_SIG_EVENTS 0x048
-#define INDIRECT_CTX_WAKEUP_EVENTS 0x050
-#define NN_PUT 0x080
-#define NN_GET 0x084
-#define TIMESTAMP_LOW 0x0c0
-#define TIMESTAMP_HIGH 0x0c4
-#define T_INDEX_BYTE_INDEX 0x0f4
-#define LOCAL_CSR_STATUS 0x180
-
-u32 ixp2000_uengine_mask;
-
-static void *ixp2000_uengine_csr_area(int uengine)
-{
- return ((void *)IXP_UENGINE_CSR_VIRT_BASE) + (uengine << 10);
-}
-
-/*
- * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR
- * space means that the microengine we tried to access was also trying
- * to access its own CSR space on the same clock cycle as we did. When
- * this happens, we lose the arbitration process by default, and the
- * read or write we tried to do was not actually performed, so we try
- * again until it succeeds.
- */
-u32 ixp2000_uengine_csr_read(int uengine, int offset)
-{
- void *uebase;
- u32 *local_csr_status;
- u32 *reg;
- u32 value;
-
- uebase = ixp2000_uengine_csr_area(uengine);
-
- local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
- reg = (u32 *)(uebase + offset);
- do {
- value = ixp2000_reg_read(reg);
- } while (ixp2000_reg_read(local_csr_status) & 1);
-
- return value;
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_read);
-
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value)
-{
- void *uebase;
- u32 *local_csr_status;
- u32 *reg;
-
- uebase = ixp2000_uengine_csr_area(uengine);
-
- local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS);
- reg = (u32 *)(uebase + offset);
- do {
- ixp2000_reg_write(reg, value);
- } while (ixp2000_reg_read(local_csr_status) & 1);
-}
-EXPORT_SYMBOL(ixp2000_uengine_csr_write);
-
-void ixp2000_uengine_reset(u32 uengine_mask)
-{
- u32 value;
-
- value = ixp2000_reg_read(IXP_RESET1) & ~ixp2000_uengine_mask;
-
- uengine_mask &= ixp2000_uengine_mask;
- ixp2000_reg_wrb(IXP_RESET1, value | uengine_mask);
- ixp2000_reg_wrb(IXP_RESET1, value);
-}
-EXPORT_SYMBOL(ixp2000_uengine_reset);
-
-void ixp2000_uengine_set_mode(int uengine, u32 mode)
-{
- /*
- * CTL_STR_PAR_EN: unconditionally enable parity checking on
- * control store.
- */
- mode |= 0x10000000;
- ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode);
-
- /*
- * Enable updating of condition codes.
- */
- ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000);
-
- /*
- * Initialise other per-microengine registers.
- */
- ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00);
- ixp2000_uengine_csr_write(uengine, NN_GET, 0x00);
- ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0);
-}
-EXPORT_SYMBOL(ixp2000_uengine_set_mode);
-
-static int make_even_parity(u32 x)
-{
- return hweight32(x) & 1;
-}
-
-static void ustore_write(int uengine, u64 insn)
-{
- /*
- * Generate even parity for top and bottom 20 bits.
- */
- insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41;
- insn |= (u64)make_even_parity(insn & 0x000fffff) << 40;
-
- /*
- * Write to microstore. The second write auto-increments
- * the USTORE_ADDRESS index register.
- */
- ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn);
- ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32));
-}
-
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns)
-{
- int i;
-
- /*
- * Start writing to microstore at address 0.
- */
- ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000);
- for (i = 0; i < insns; i++) {
- u64 insn;
-
- insn = (((u64)ucode[0]) << 32) |
- (((u64)ucode[1]) << 24) |
- (((u64)ucode[2]) << 16) |
- (((u64)ucode[3]) << 8) |
- ((u64)ucode[4]);
- ucode += 5;
-
- ustore_write(uengine, insn);
- }
-
- /*
- * Pad with a few NOPs at the end (to avoid the microengine
- * aborting as it prefetches beyond the last instruction), unless
- * we run off the end of the instruction store first, at which
- * point the address register will wrap back to zero.
- */
- for (i = 0; i < 4; i++) {
- u32 addr;
-
- addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS);
- if (addr == 0x80000000)
- break;
- ustore_write(uengine, 0xf0000c0300ULL);
- }
-
- /*
- * End programming.
- */
- ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000);
-}
-EXPORT_SYMBOL(ixp2000_uengine_load_microcode);
-
-void ixp2000_uengine_init_context(int uengine, int context, int pc)
-{
- /*
- * Select the right context for indirect access.
- */
- ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context);
-
- /*
- * Initialise signal masks to immediately go to Ready state.
- */
- ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1);
- ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1);
-
- /*
- * Set program counter.
- */
- ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc);
-}
-EXPORT_SYMBOL(ixp2000_uengine_init_context);
-
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask)
-{
- u32 mask;
-
- /*
- * Enable the specified context to go to Executing state.
- */
- mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
- mask |= ctx_mask << 8;
- ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_start_contexts);
-
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask)
-{
- u32 mask;
-
- /*
- * Disable the Ready->Executing transition. Note that this
- * does not stop the context until it voluntarily yields.
- */
- mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES);
- mask &= ~(ctx_mask << 8);
- ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask);
-}
-EXPORT_SYMBOL(ixp2000_uengine_stop_contexts);
-
-static int check_ixp_type(struct ixp2000_uengine_code *c)
-{
- u32 product_id;
- u32 rev;
-
- product_id = ixp2000_reg_read(IXP_PRODUCT_ID);
- if (((product_id >> 16) & 0x1f) != 0)
- return 0;
-
- switch ((product_id >> 8) & 0xff) {
-#ifdef CONFIG_ARCH_IXP2000
- case 0: /* IXP2800 */
- if (!(c->cpu_model_bitmask & 4))
- return 0;
- break;
-
- case 1: /* IXP2850 */
- if (!(c->cpu_model_bitmask & 8))
- return 0;
- break;
-
- case 2: /* IXP2400 */
- if (!(c->cpu_model_bitmask & 2))
- return 0;
- break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
- case 4: /* IXP23xx */
- if (!(c->cpu_model_bitmask & 0x3f0))
- return 0;
- break;
-#endif
-
- default:
- return 0;
- }
-
- rev = product_id & 0xff;
- if (rev < c->cpu_min_revision || rev > c->cpu_max_revision)
- return 0;
-
- return 1;
-}
-
-static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b)
-{
- int offset;
- int i;
-
- offset = 0;
-
- for (i = 0; i < 128; i++) {
- u8 b3;
- u8 b2;
- u8 b1;
- u8 b0;
-
- b3 = (gpr_a[i] >> 24) & 0xff;
- b2 = (gpr_a[i] >> 16) & 0xff;
- b1 = (gpr_a[i] >> 8) & 0xff;
- b0 = gpr_a[i] & 0xff;
-
- /* immed[@ai, (b1 << 8) | b0] */
- /* 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII */
- ucode[offset++] = 0xf0;
- ucode[offset++] = (b1 >> 4);
- ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6);
- ucode[offset++] = (b0 << 2);
- ucode[offset++] = 0x80 | i;
-
- /* immed_w1[@ai, (b3 << 8) | b2] */
- /* 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII */
- ucode[offset++] = 0xf4;
- ucode[offset++] = 0x40 | (b3 >> 4);
- ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6);
- ucode[offset++] = (b2 << 2);
- ucode[offset++] = 0x80 | i;
- }
-
- for (i = 0; i < 128; i++) {
- u8 b3;
- u8 b2;
- u8 b1;
- u8 b0;
-
- b3 = (gpr_b[i] >> 24) & 0xff;
- b2 = (gpr_b[i] >> 16) & 0xff;
- b1 = (gpr_b[i] >> 8) & 0xff;
- b0 = gpr_b[i] & 0xff;
-
- /* immed[@bi, (b1 << 8) | b0] */
- /* 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV */
- ucode[offset++] = 0xf0;
- ucode[offset++] = (b1 >> 4);
- ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6);
- ucode[offset++] = (i << 2) | 0x03;
- ucode[offset++] = b0;
-
- /* immed_w1[@bi, (b3 << 8) | b2] */
- /* 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV */
- ucode[offset++] = 0xf4;
- ucode[offset++] = 0x40 | (b3 >> 4);
- ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6);
- ucode[offset++] = (i << 2) | 0x03;
- ucode[offset++] = b2;
- }
-
- /* ctx_arb[kill] */
- ucode[offset++] = 0xe0;
- ucode[offset++] = 0x00;
- ucode[offset++] = 0x01;
- ucode[offset++] = 0x00;
- ucode[offset++] = 0x00;
-}
-
-static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c)
-{
- int per_ctx_regs;
- u32 *gpr_a;
- u32 *gpr_b;
- u8 *ucode;
- int i;
-
- gpr_a = kzalloc(128 * sizeof(u32), GFP_KERNEL);
- gpr_b = kzalloc(128 * sizeof(u32), GFP_KERNEL);
- ucode = kmalloc(513 * 5, GFP_KERNEL);
- if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) {
- kfree(ucode);
- kfree(gpr_b);
- kfree(gpr_a);
- return 1;
- }
-
- per_ctx_regs = 16;
- if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS)
- per_ctx_regs = 32;
-
- for (i = 0; i < 256; i++) {
- struct ixp2000_reg_value *r = c->initial_reg_values + i;
- u32 *bank;
- int inc;
- int j;
-
- if (r->reg == -1)
- break;
-
- bank = (r->reg & 0x400) ? gpr_b : gpr_a;
- inc = (r->reg & 0x80) ? 128 : per_ctx_regs;
-
- j = r->reg & 0x7f;
- while (j < 128) {
- bank[j] = r->value;
- j += inc;
- }
- }
-
- generate_ucode(ucode, gpr_a, gpr_b);
- ixp2000_uengine_load_microcode(uengine, ucode, 513);
- ixp2000_uengine_init_context(uengine, 0, 0);
- ixp2000_uengine_start_contexts(uengine, 0x01);
- for (i = 0; i < 100; i++) {
- u32 status;
-
- status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS);
- if (!(status & 0x80000000))
- break;
- }
- ixp2000_uengine_stop_contexts(uengine, 0x01);
-
- kfree(ucode);
- kfree(gpr_b);
- kfree(gpr_a);
-
- return !!(i == 100);
-}
-
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c)
-{
- int ctx;
-
- if (!check_ixp_type(c))
- return 1;
-
- if (!(ixp2000_uengine_mask & (1 << uengine)))
- return 1;
-
- ixp2000_uengine_reset(1 << uengine);
- ixp2000_uengine_set_mode(uengine, c->uengine_parameters);
- if (set_initial_registers(uengine, c))
- return 1;
- ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns);
-
- for (ctx = 0; ctx < 8; ctx++)
- ixp2000_uengine_init_context(uengine, ctx, 0);
-
- return 0;
-}
-EXPORT_SYMBOL(ixp2000_uengine_load);
-
-
-static int __init ixp2000_uengine_init(void)
-{
- int uengine;
- u32 value;
-
- /*
- * Determine number of microengines present.
- */
- switch ((ixp2000_reg_read(IXP_PRODUCT_ID) >> 8) & 0x1fff) {
-#ifdef CONFIG_ARCH_IXP2000
- case 0: /* IXP2800 */
- case 1: /* IXP2850 */
- ixp2000_uengine_mask = 0x00ff00ff;
- break;
-
- case 2: /* IXP2400 */
- ixp2000_uengine_mask = 0x000f000f;
- break;
-#endif
-
-#ifdef CONFIG_ARCH_IXP23XX
- case 4: /* IXP23xx */
- ixp2000_uengine_mask = (*IXP23XX_EXP_CFG_FUSE >> 8) & 0xf;
- break;
-#endif
-
- default:
- printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n",
- (unsigned int)ixp2000_reg_read(IXP_PRODUCT_ID));
- ixp2000_uengine_mask = 0x00000000;
- break;
- }
-
- /*
- * Reset microengines.
- */
- ixp2000_uengine_reset(ixp2000_uengine_mask);
-
- /*
- * Synchronise timestamp counters across all microengines.
- */
- value = ixp2000_reg_read(IXP_MISC_CONTROL);
- ixp2000_reg_wrb(IXP_MISC_CONTROL, value & ~0x80);
- for (uengine = 0; uengine < 32; uengine++) {
- if (ixp2000_uengine_mask & (1 << uengine)) {
- ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0);
- ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0);
- }
- }
- ixp2000_reg_wrb(IXP_MISC_CONTROL, value | 0x80);
-
- return 0;
-}
-
-subsys_initcall(ixp2000_uengine_init);
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91RM9200=y
CONFIG_MACH_ONEARM=y
CONFIG_ARCH_AT91RM9200DK=y
CONFIG_MACH_AT91RM9200EK=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP2000=y
-CONFIG_ARCH_ENP2611=y
-CONFIG_ARCH_IXDP2400=y
-CONFIG_ARCH_IXDP2800=y
-CONFIG_ARCH_IXDP2401=y
-CONFIG_ARCH_IXDP2801=y
-# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP2000=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-CONFIG_E100=y
-CONFIG_ENP2611_MSF_NET=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IXP2000=y
-CONFIG_WATCHDOG=y
-CONFIG_IXP2000_WATCHDOG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_IXP23XX=y
-CONFIG_MACH_ESPRESSO=y
-CONFIG_MACH_IXDP2351=y
-CONFIG_MACH_ROADRUNNER=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_LEGACY=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_E100=y
-CONFIG_E1000=y
-CONFIG_WAN=y
-CONFIG_HDLC=y
-CONFIG_HDLC_RAW=y
-CONFIG_HDLC_CISCO=y
-CONFIG_HDLC_FR=y
-CONFIG_HDLC_PPP=y
-CONFIG_DLCI=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-/*
- * Generic library functions for the microengines found on the Intel
- * IXP2000 series of network processors.
- *
- * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
- * Dedicated to Marija Kulikova.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation; either version 2.1 of the
- * License, or (at your option) any later version.
- */
-
-#ifndef __IXP2000_UENGINE_H
-#define __IXP2000_UENGINE_H
-
-extern u32 ixp2000_uengine_mask;
-
-struct ixp2000_uengine_code
-{
- u32 cpu_model_bitmask;
- u8 cpu_min_revision;
- u8 cpu_max_revision;
-
- u32 uengine_parameters;
-
- struct ixp2000_reg_value {
- int reg;
- u32 value;
- } *initial_reg_values;
-
- int num_insns;
- u8 *insns;
-};
-
-u32 ixp2000_uengine_csr_read(int uengine, int offset);
-void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
-void ixp2000_uengine_reset(u32 uengine_mask);
-void ixp2000_uengine_set_mode(int uengine, u32 mode);
-void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
-void ixp2000_uengine_init_context(int uengine, int context, int pc);
-void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
-void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
-int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
-
-#define IXP2000_UENGINE_8_CONTEXTS 0x00000000
-#define IXP2000_UENGINE_4_CONTEXTS 0x80000000
-#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000
-#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000
-#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000
-#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000
-#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000
-#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000
-#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000
-#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000
-#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000
-
-
-#endif
config HAVE_AT91_DBGU1
bool
-config HAVE_AT91_USART3
- bool
-
-config HAVE_AT91_USART4
- bool
-
-config HAVE_AT91_USART5
- bool
-
config AT91_SAM9_ALT_RESET
bool
default !ARCH_AT91X40
bool
default !ARCH_AT91X40
+config SOC_AT91SAM9
+ bool
+ select GENERIC_CLOCKEVENTS
+ select CPU_ARM926T
+
menu "Atmel AT91 System-on-Chip"
-choice
- prompt "Atmel AT91 Processor"
+comment "Atmel AT91 Processor"
-config ARCH_AT91RM9200
+config SOC_AT91SAM9
+ bool
+ select CPU_ARM926T
+ select AT91_SAM9_TIME
+ select AT91_SAM9_SMC
+
+config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9260
+ bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
+ or AT91SAM9G20 SoC.
-config ARCH_AT91SAM9261
- bool "AT91SAM9261"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9261
+ bool "AT91SAM9261 or AT91SAM9G10"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ help
+ Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
+
+config SOC_AT91SAM9263
+ bool "AT91SAM9263"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+
+config SOC_AT91SAM9RL
+ bool "AT91SAM9RL"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
+ select HAVE_FB_ATMEL
-config ARCH_AT91SAM9G10
- bool "AT91SAM9G10"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
+config SOC_AT91SAM9G45
+ bool "AT91SAM9G45 or AT91SAM9M10 families"
+ select SOC_AT91SAM9
+ select HAVE_AT91_DBGU1
+ select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
+ This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+
+config SOC_AT91SAM9X5
+ bool "AT91SAM9x5 family"
+ select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select HAVE_NET_MACB
+ help
+ Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
+ This means that your SAM9 name finishes with a '5' (except if it is
+ AT91SAM9G45!).
+ This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
+ and AT91SAM9X35.
+
+choice
+ prompt "Atmel AT91 Processor Devices for non DT boards"
+
+config ARCH_AT91_NONE
+ bool "None"
+
+config ARCH_AT91RM9200
+ bool "AT91RM9200"
+ select SOC_AT91RM9200
+
+config ARCH_AT91SAM9260
+ bool "AT91SAM9260 or AT91SAM9XE"
+ select SOC_AT91SAM9260
+
+config ARCH_AT91SAM9261
+ bool "AT91SAM9261"
+ select SOC_AT91SAM9261
+
+config ARCH_AT91SAM9G10
+ bool "AT91SAM9G10"
+ select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
+ select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_DBGU0
- select HAVE_AT91_USART3
- select HAVE_AT91_USART4
- select HAVE_AT91_USART5
- select HAVE_NET_MACB
+ select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_AT91_USART3
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU1
-
-config ARCH_AT91SAM9X5
- bool "AT91SAM9x5 family"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
- select HAVE_FB_ATMEL
- select HAVE_NET_MACB
- select HAVE_AT91_DBGU0
+ select SOC_AT91SAM9G45
config ARCH_AT91X40
bool "AT91x40"
+ depends on !MMU
select ARCH_USES_GETTIMEOFFSET
endchoice
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
+ <http://www.atmel.com/tools/SAM9G20-EK.aspx>
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
help
- Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
- Engineering Sample.
+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
+ Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
+ families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
+ <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
endif
system clock (of at least several MHz), rounding is less of a
problem so it can be safer to use a decimal values like 100.
-choice
- prompt "Select a UART for early kernel messages"
-
-config AT91_EARLY_DBGU0
- bool "DBGU on rm9200, 9260/9g20, 9261/9g10 and 9rl"
- depends on HAVE_AT91_DBGU0
-
-config AT91_EARLY_DBGU1
- bool "DBGU on 9263 and 9g45"
- depends on HAVE_AT91_DBGU1
-
-config AT91_EARLY_USART0
- bool "USART0"
-
-config AT91_EARLY_USART1
- bool "USART1"
-
-config AT91_EARLY_USART2
- bool "USART2"
- depends on ! ARCH_AT91X40
-
-config AT91_EARLY_USART3
- bool "USART3"
- depends on HAVE_AT91_USART3
-
-config AT91_EARLY_USART4
- bool "USART4"
- depends on HAVE_AT91_USART4
-
-config AT91_EARLY_USART5
- bool "USART5"
- depends on HAVE_AT91_USART5
-
-endchoice
-
endmenu
endif
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam926x_time.o sam9_smc.o
# CPU-specific support
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5) += at91sam9x5.o at91sam926x_time.o sam9_smc.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_SOC_AT91SAM9260) += at91sam9260.o
+obj-$(CONFIG_SOC_AT91SAM9261) += at91sam9261.o
+obj-$(CONFIG_SOC_AT91SAM9263) += at91sam9263.o
+obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9X5) += at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9RL) += at91sam9rl.o
+
+obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91rm9200_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91rm9200_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9260_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9260_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
clk_register(&hck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9261_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9261_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
clk_register(&pck3);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9263_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9263_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9g45_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9g45_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
clk_register(&pck1);
}
-static struct clk_lookup console_clock_lookup;
-
-void __init at91sam9rl_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
at91_uarts[portnr] = pdev;
}
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at91sam9rl_set_console_clock(at91_uarts[portnr]->id);
- }
-}
-
void __init at91_add_device_serial(void)
{
int i;
if (at91_uarts[i])
platform_device_register(at91_uarts[i]);
}
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata onearm_eth_data = {
static void __init onearm_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&onearm_eth_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init afeb9260_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&afeb9260_usbh_data);
{
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init cam60_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* SPI */
at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
{
/* Initialize processor: 20.000 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata carmeva_eth_data = {
static void __init carmeva_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&carmeva_eth_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
- /* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
/* NOR */
cpu9krea_add_device_nor();
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART3 on ttyS4. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+ /* USART4 on ttyS5. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&cpu9krea_usbh_data);
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
- /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata cpuat91_eth_data = {
static void __init cpuat91_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+ ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART2 on ttyS3 (Rx, Tx) */
+ at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+ ATMEL_UART_RTS);
at91_add_device_serial();
/* LEDs. */
at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0 */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb337_eth_data = {
static void __init csb337_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
/* Serial */
+ /* DBGU on ttyS0 */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb337_eth_data);
{
/* Initialize processor: 3.6864 MHz crystal */
at91_initialize(3686400);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* make console=ttyS0 (ie, DBGU) the default */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata csb637_eth_data = {
/* LED(s) */
at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&csb637_eth_data);
/*
* Setup code for AT91SAM Evaluation Kits with Device Tree support
*
- * Covers: * AT91SAM9G45-EKES board
- * * AT91SAM9M10-EKES board
- * * AT91SAM9M10G45-EK board
- *
* Copyright (C) 2011 Atmel,
* 2011 Nicolas Ferre <nicolas.ferre@atmel.com>
*
}
static const char *at91_dt_board_compat[] __initdata = {
- "atmel,at91sam9m10g45ek",
- "atmel,at91sam9x5ek",
- "calao,usb-a9g20",
+ "atmel,at91sam9",
NULL
};
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eb9200_eth_data = {
static void __init eb9200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART2 on ttyS2. (Rx, Tx) - IRDA */
+ at91_register_uart(AT91RM9200_ID_US2, 2, 0);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&eb9200_eth_data);
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ecb_at91eth_data = {
static void __init ecb_at91board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
at91_add_device_serial();
/* Ethernet */
at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata eco920_eth_data = {
static void __init eco920_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+ /* DBGU on ttyS0. (Rx & Tx only */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
at91_add_device_eth(&eco920_eth_data);
at91_add_device_usbh(&eco920_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/* USB Host port */
static void __init flexibity_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&flexibity_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS
- | ATMEL_UART_DTR
- | ATMEL_UART_DSR
- | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US3, 4,
- ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx & Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-
- /* Set the internal pull-up resistor on DRXD */
- at91_set_A_periph(AT91_PIN_PB14, 1);
-
}
/*
static void __init foxg20_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS
+ | ATMEL_UART_DTR
+ | ATMEL_UART_DSR
+ | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US3, 4,
+ ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx & Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+ /* Set the internal pull-up resistor on DRXD */
+ at91_set_A_periph(AT91_PIN_PB14, 1);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&foxg20_usbh_data);
static void __init gsia18s_init_early(void)
{
stamp9g20_init_early();
-
- /*
- * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
- * Used for Internal Analog Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
- /*
- * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
- * Used for GPS or WiFi or Data stream.
- */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
- * Used for External Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US2, 3,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART3 on ttyS4 (Rx, Tx, RTS).
- * Used for RS-485.
- */
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
- /*
- * USART4 on ttyS5 (Rx, Tx).
- * Used for TRX433 Radio Module.
- */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
}
/*
static void __init gsia18s_board_init(void)
{
+ /*
+ * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
+ * Used for Internal Analog Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS |
+ ATMEL_UART_DTR | ATMEL_UART_DSR |
+ ATMEL_UART_DCD | ATMEL_UART_RI);
+ /*
+ * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
+ * Used for GPS or WiFi or Data stream.
+ */
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
+ * Used for External Modem.
+ */
+ at91_register_uart(AT91SAM9260_ID_US2, 3,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ /*
+ * USART3 on ttyS4 (Rx, Tx, RTS).
+ * Used for RS-485.
+ */
+ at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
+
+ /*
+ * USART4 on ttyS5 (Rx, Tx).
+ * Used for TRX433 Radio Module.
+ */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_udc(&udc_data);
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kafa_eth_data = {
static void __init kafa_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kafa_eth_data);
/* Initialize processor: 10 MHz crystal */
at91_initialize(10000000);
-
- /* Set up the LEDs */
- at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
- /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata kb9202_eth_data = {
static void __init kb9202_board_init(void)
{
+ /* Set up the LEDs */
+ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx & Tx only) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+ /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, 0);
+
+ /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&kb9202_eth_data);
{
/* Initialize processor: 20 MHz crystal */
at91_initialize(20000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init neocore926_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
static void __init pcontrol_g20_init_early(void)
{
stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
}
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
static void __init pcontrol_g20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
+ | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
+ at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata picotux200_eth_data = {
static void __init picotux200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&picotux200_eth_data);
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS1 (ie, USART0) */
- at91_set_serial_console(1);
-
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata dk_eth_data = {
static void __init dk_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&dk_eth_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static struct macb_platform_data __initdata ek_eth_data = {
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&ek_eth_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- /* This one is for debugging */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- /* Dialin/-out modem interface */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART3 on ttyS4. (Rx, Tx, RTS) */
- /* RS485 communication */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
*/
static void __init rsi_ews_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ /* This one is for debugging */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ /* Dialin/-out modem interface */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART3 on ttyS4. (Rx, Tx, RTS) */
+ /* RS485 communication */
+ at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
at91_add_device_serial();
at91_set_gpio_output(AT91_PIN_PA21, 0);
/* Ethernet */
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 16.367 MHz crystal */
at91_initialize(16367660);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 not connected on the -EK board */
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 not connected on the -EK board */
+ /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+ at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS Host */
at91_add_device_usbh_ohci(&ek_usbh_hs_data);
{
/* Initialize processor: 12.000 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_add_device_serial();
/* USB HS */
at91_add_device_usba(&ek_usba_udc_data);
static void __init snapper9260_init_early(void)
{
at91_initialize(18432000);
-
- /* Debug on ttyS0 */
- at91_register_uart(0, 0, 0);
- at91_set_serial_console(0);
-
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
}
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
+ /* Debug on ttyS0 */
+ at91_register_uart(0, 0, 0);
+
+ at91_register_uart(AT91SAM9260_ID_US0, 1,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US1, 2,
+ ATMEL_UART_CTS | ATMEL_UART_RTS);
+ at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
at91_add_device_serial();
at91_add_device_usbh(&snapper9260_usbh_data);
at91_add_device_udc(&snapper9260_udc_data);
{
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20evb_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-}
-
-static void __init portuxg20_init_early(void)
-{
- stamp9g20_init_early();
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
}
/*
void __init stamp9g20_board_init(void)
{
/* Serial */
+ /* DGBU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* NAND */
add_device_nand();
static void __init portuxg20_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+ /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART4 on ttyS5. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+ /* USART5 on ttyS6. (Rx, Tx only) */
+ at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
static void __init stamp9g20evb_board_init(void)
{
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
stamp9g20_board_init();
/* USB Host */
at91_add_device_usbh(&usbh_data);
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = portuxg20_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
MACHINE_END
/* Maintainer: taskit GmbH */
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
- .init_early = stamp9g20evb_init_early,
+ .init_early = stamp9g20_init_early,
.init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
MACHINE_END
{
/* Initialize processor: 12.00 MHz crystal */
at91_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init ek_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&ek_usbh_data);
/* Initialize processor: 18.432 MHz crystal */
at91_initialize(18432000);
-
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
/*
static void __init yl9200_board_init(void)
{
+ /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
+ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
+
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+ /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&yl9200_eth_data);
#include <linux/export.h>
#include <asm/proc-fns.h>
#include <asm/cpuidle.h>
+#include <mach/cpu.h>
#include "pm.h"
struct cpuidle_driver *drv,
int index)
{
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
return index;
}
extern struct sys_timer at91x40_timer;
/* Clocks */
-/*
- * function to specify the clock of the default console. As we do not
- * use the device/driver bus, the dev_name is not intialize. So we need
- * to link the clock to a specific con_id only "usart"
- */
-extern void __init at91rm9200_set_console_clock(int id);
-extern void __init at91sam9260_set_console_clock(int id);
-extern void __init at91sam9261_set_console_clock(int id);
-extern void __init at91sam9263_set_console_clock(int id);
-extern void __init at91sam9rl_set_console_clock(int id);
-extern void __init at91sam9g45_set_console_clock(int id);
#ifdef CONFIG_AT91_PMC_UNIT
extern int __init at91_clock_init(unsigned long main_clock);
extern int __init at91_dt_clock_init(void);
#define AT91RM9200_BASE_RTC 0xfffffe00 /* Real-Time Clock */
#define AT91RM9200_BASE_MC 0xffffff00 /* Memory Controllers */
-#define AT91_USART0 AT91RM9200_BASE_US0
-#define AT91_USART1 AT91RM9200_BASE_US1
-#define AT91_USART2 AT91RM9200_BASE_US2
-#define AT91_USART3 AT91RM9200_BASE_US3
-
/*
* Internal Memory.
*/
#define AT91SAM9260_BASE_WDT 0xfffffd40
#define AT91SAM9260_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9260_BASE_US0
-#define AT91_USART1 AT91SAM9260_BASE_US1
-#define AT91_USART2 AT91SAM9260_BASE_US2
-#define AT91_USART3 AT91SAM9260_BASE_US3
-#define AT91_USART4 AT91SAM9260_BASE_US4
-#define AT91_USART5 AT91SAM9260_BASE_US5
-
/*
* Internal Memory.
#define AT91SAM9261_BASE_WDT 0xfffffd40
#define AT91SAM9261_BASE_GPBR 0xfffffd50
-#define AT91_USART0 AT91SAM9261_BASE_US0
-#define AT91_USART1 AT91SAM9261_BASE_US1
-#define AT91_USART2 AT91SAM9261_BASE_US2
-
/*
* Internal Memory.
#define AT91SAM9263_BASE_RTT1 0xfffffd50
#define AT91SAM9263_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9263_BASE_US0
-#define AT91_USART1 AT91SAM9263_BASE_US1
-#define AT91_USART2 AT91SAM9263_BASE_US2
-
#define AT91_SMC AT91_SMC0
/*
#define AT91SAM9G45_BASE_RTC 0xfffffdb0
#define AT91SAM9G45_BASE_GPBR 0xfffffd60
-#define AT91_USART0 AT91SAM9G45_BASE_US0
-#define AT91_USART1 AT91SAM9G45_BASE_US1
-#define AT91_USART2 AT91SAM9G45_BASE_US2
-#define AT91_USART3 AT91SAM9G45_BASE_US3
-
/*
* Internal Memory.
*/
#define AT91SAM9RL_BASE_GPBR 0xfffffd60
#define AT91SAM9RL_BASE_RTC 0xfffffe00
-#define AT91_USART0 AT91SAM9RL_BASE_US0
-#define AT91_USART1 AT91SAM9RL_BASE_US1
-#define AT91_USART2 AT91SAM9RL_BASE_US2
-#define AT91_USART3 AT91SAM9RL_BASE_US3
-
/*
* Internal Memory.
#define AT91SAM9X5_BASE_USART1 0xf8020000
#define AT91SAM9X5_BASE_USART2 0xf8024000
-/*
- * Base addresses for early serial code (uncompress.h)
- */
-#define AT91_DBGU AT91_BASE_DBGU0
-#define AT91_USART0 AT91SAM9X5_BASE_USART0
-#define AT91_USART1 AT91SAM9X5_BASE_USART1
-#define AT91_USART2 AT91SAM9X5_BASE_USART2
-
/*
* Internal Memory.
*/
#define ATMEL_UART_RI 0x20
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-extern void __init at91_set_serial_console(unsigned portnr);
extern struct platform_device *atmel_default_console_device;
#define ARCH_REVISON_9200_BGA (0 << 0)
#define ARCH_REVISON_9200_PQFP (1 << 0)
+#ifndef __ASSEMBLY__
enum at91_soc_type {
/* 920T */
AT91_SOC_RM9200,
return at91_soc_initdata.type != AT91_SOC_NONE;
}
-#ifdef CONFIG_ARCH_AT91RM9200
+#ifdef CONFIG_SOC_AT91RM9200
#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200)
#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA)
#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP)
#define cpu_is_at91rm9200_pqfp() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9260
+#ifdef CONFIG_SOC_AT91SAM9260
#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE)
#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260)
+#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
#else
#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G20
-#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20)
-#else
#define cpu_is_at91sam9g20() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9261
+#ifdef CONFIG_SOC_AT91SAM9261
#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9G10
#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10)
#else
+#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9g10() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263)
#else
#define cpu_is_at91sam9263() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9RL
+#ifdef CONFIG_SOC_AT91SAM9RL
#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL)
#else
#define cpu_is_at91sam9rl() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9G45
+#ifdef CONFIG_SOC_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45)
#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES)
#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10)
#define cpu_is_at91sam9m11() (0)
#endif
-#ifdef CONFIG_ARCH_AT91SAM9X5
+#ifdef CONFIG_SOC_AT91SAM9X5
#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5)
#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15)
#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35)
* definitions may reduce clutter in common drivers.
*/
#define cpu_is_at32ap7000() (0)
+#endif /* __ASSEMBLY__ */
#endif /* __MACH_CPU_H__ */
/* 9263, 9g45 */
#define AT91_BASE_DBGU1 0xffffee00
-#if defined(CONFIG_ARCH_AT91RM9200)
+#if defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
#include <mach/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
#include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
#include <mach/at91sam9261.h>
-#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <mach/at91sam9263.h>
-#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <mach/at91sam9rl.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
#include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91SAM9X5)
#include <mach/at91sam9x5.h>
-#elif defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-#if !defined(CONFIG_ARCH_AT91X40)
/*
* On all at91 except rm9200 and x40 have the System Controller starts
* at address 0xffffc000 and has a size of 16KiB.
/*
* arch/arm/mach-at91/include/mach/uncompress.h
*
- * Copyright (C) 2003 SAN People
+ * Copyright (C) 2003 SAN People
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/atmel_serial.h>
#include <mach/hardware.h>
-#if defined(CONFIG_AT91_EARLY_DBGU0)
-#define UART_OFFSET AT91_BASE_DBGU0
-#elif defined(CONFIG_AT91_EARLY_DBGU1)
-#define UART_OFFSET AT91_BASE_DBGU1
-#elif defined(CONFIG_AT91_EARLY_USART0)
-#define UART_OFFSET AT91_USART0
-#elif defined(CONFIG_AT91_EARLY_USART1)
-#define UART_OFFSET AT91_USART1
-#elif defined(CONFIG_AT91_EARLY_USART2)
-#define UART_OFFSET AT91_USART2
-#elif defined(CONFIG_AT91_EARLY_USART3)
-#define UART_OFFSET AT91_USART3
-#elif defined(CONFIG_AT91_EARLY_USART4)
-#define UART_OFFSET AT91_USART4
-#elif defined(CONFIG_AT91_EARLY_USART5)
-#define UART_OFFSET AT91_USART5
+#include <mach/at91_dbgu.h>
+#include <mach/cpu.h>
+
+void __iomem *at91_uart;
+
+#if !defined(CONFIG_ARCH_AT91X40)
+static const u32 uarts_rm9200[] = {
+ AT91_BASE_DBGU0,
+ AT91RM9200_BASE_US0,
+ AT91RM9200_BASE_US1,
+ AT91RM9200_BASE_US2,
+ AT91RM9200_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9260[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9260_BASE_US0,
+ AT91SAM9260_BASE_US1,
+ AT91SAM9260_BASE_US2,
+ AT91SAM9260_BASE_US3,
+ AT91SAM9260_BASE_US4,
+ AT91SAM9260_BASE_US5,
+ 0,
+};
+
+static const u32 uarts_sam9261[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9261_BASE_US0,
+ AT91SAM9261_BASE_US1,
+ AT91SAM9261_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9263[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9263_BASE_US0,
+ AT91SAM9263_BASE_US1,
+ AT91SAM9263_BASE_US2,
+ 0,
+};
+
+static const u32 uarts_sam9g45[] = {
+ AT91_BASE_DBGU1,
+ AT91SAM9G45_BASE_US0,
+ AT91SAM9G45_BASE_US1,
+ AT91SAM9G45_BASE_US2,
+ AT91SAM9G45_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9rl[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9RL_BASE_US0,
+ AT91SAM9RL_BASE_US1,
+ AT91SAM9RL_BASE_US2,
+ AT91SAM9RL_BASE_US3,
+ 0,
+};
+
+static const u32 uarts_sam9x5[] = {
+ AT91_BASE_DBGU0,
+ AT91SAM9X5_BASE_USART0,
+ AT91SAM9X5_BASE_USART1,
+ AT91SAM9X5_BASE_USART2,
+ 0,
+};
+
+static inline const u32* decomp_soc_detect(u32 dbgu_base)
+{
+ u32 cidr, socid;
+
+ cidr = __raw_readl(dbgu_base + AT91_DBGU_CIDR);
+ socid = cidr & ~AT91_CIDR_VERSION;
+
+ switch (socid) {
+ case ARCH_ID_AT91RM9200:
+ return uarts_rm9200;
+
+ case ARCH_ID_AT91SAM9G20:
+ case ARCH_ID_AT91SAM9260:
+ return uarts_sam9260;
+
+ case ARCH_ID_AT91SAM9261:
+ return uarts_sam9261;
+
+ case ARCH_ID_AT91SAM9263:
+ return uarts_sam9263;
+
+ case ARCH_ID_AT91SAM9G45:
+ return uarts_sam9g45;
+
+ case ARCH_ID_AT91SAM9RL64:
+ return uarts_sam9rl;
+
+ case ARCH_ID_AT91SAM9X5:
+ return uarts_sam9x5;
+ }
+
+ /* at91sam9g10 */
+ if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ return uarts_sam9261;
+ }
+ /* at91sam9xe */
+ else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
+ return uarts_sam9260;
+ }
+
+ return NULL;
+}
+
+static inline void arch_decomp_setup(void)
+{
+ int i = 0;
+ const u32* usarts;
+
+ usarts = decomp_soc_detect(AT91_BASE_DBGU0);
+
+ if (!usarts)
+ usarts = decomp_soc_detect(AT91_BASE_DBGU1);
+ if (!usarts) {
+ at91_uart = NULL;
+ return;
+ }
+
+ do {
+ /* physical address */
+ at91_uart = (void __iomem *)usarts[i];
+
+ if (__raw_readl(at91_uart + ATMEL_US_BRGR))
+ return;
+ i++;
+ } while (usarts[i]);
+
+ at91_uart = NULL;
+}
+#else
+static inline void arch_decomp_setup(void)
+{
+ at91_uart = NULL;
+}
#endif
/*
*/
static void putc(int c)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXRDY))
barrier();
- __raw_writel(c, sys + ATMEL_US_THR);
-#endif
+ __raw_writel(c, at91_uart + ATMEL_US_THR);
}
static inline void flush(void)
{
-#ifdef UART_OFFSET
- void __iomem *sys = (void __iomem *) UART_OFFSET; /* physical address */
+ if (!at91_uart)
+ return;
/* wait for transmission to complete */
- while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+ while (!(__raw_readl(at91_uart + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
barrier();
-#endif
}
-#define arch_decomp_setup()
-
#define arch_decomp_wdog()
#endif
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
- at91_standby();
+ if (cpu_is_at91rm9200())
+ at91rm9200_standby();
+ else if (cpu_is_at91sam9g45())
+ at91sam9g45_standby();
+ else
+ at91sam9_standby();
break;
case PM_SUSPEND_ON:
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
-#ifdef CONFIG_ARCH_AT91RM9200
/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
- at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
-#endif
+ if (cpu_is_at91rm9200())
+ at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
suspend_set_ops(&at91_pm_ops);
#define __ARCH_ARM_MACH_AT91_PM
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91RM9200
#include <mach/at91rm9200_sdramc.h>
/*
"r" (lpr));
}
-#define at91_standby at91rm9200_standby
-
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
-
/* We manage both DDRAM/SDRAM controllers, we need more than one value to
* remember.
*/
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#define at91_standby at91sam9g45_standby
-
-#else
-
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
}
-#define at91_standby at91sam9_standby
-
-#endif
-
#endif
#include <mach/at91_ramc.h>
-#ifdef CONFIG_ARCH_AT91SAM9263
+#ifdef CONFIG_SOC_AT91SAM9263
/*
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
* handle those cases both here and in the Suspend-To-RAM support.
return at91_boot_soc.init != NULL;
}
-#if !defined(CONFIG_ARCH_AT91RM9200)
+#if !defined(CONFIG_SOC_AT91RM9200)
#define at91rm9200_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20))
+#if !defined(CONFIG_SOC_AT91SAM9260)
#define at91sam9260_soc at91_boot_soc
#endif
-#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10))
+#if !defined(CONFIG_SOC_AT91SAM9261)
#define at91sam9261_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9263)
+#if !defined(CONFIG_SOC_AT91SAM9263)
#define at91sam9263_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9G45)
+#if !defined(CONFIG_SOC_AT91SAM9G45)
#define at91sam9g45_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9RL)
+#if !defined(CONFIG_SOC_AT91SAM9RL)
#define at91sam9rl_soc at91_boot_soc
#endif
-#if !defined(CONFIG_ARCH_AT91SAM9X5)
+#if !defined(CONFIG_SOC_AT91SAM9X5)
#define at91sam9x5_soc at91_boot_soc
#endif
select MXC_DEBUG_BOARD
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
static void __maybe_unused ads7846_dev_init(void)
{
if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
- printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
return;
}
gpio_direction_input(ADS7846_PENDOWN);
mx35_clocks_init();
}
-struct sys_timer eukrea_cpuimx35_timer = {
+static struct sys_timer eukrea_cpuimx35_timer = {
.init = eukrea_cpuimx35_timer_init,
};
mx1_clocks_init(32000);
}
-struct sys_timer mx1ads_timer = {
+static struct sys_timer mx1ads_timer = {
.init = mx1ads_timer_init,
};
imx21_add_mxc_nand(&mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- platform_device_register_full(
- (struct platform_device_info *)&mx21ads_cs8900_devinfo);
+ platform_device_register_full(&mx21ads_cs8900_devinfo);
}
static void __init mx21ads_timer_init(void)
mx31_clocks_init(26000000);
}
-struct sys_timer mx31lite_timer = {
+static struct sys_timer mx31lite_timer = {
.init = mx31lite_timer_init,
};
mx31_clocks_init(26000000);
}
-struct sys_timer mx31moboard_timer = {
+static struct sys_timer mx31moboard_timer = {
.init = mx31moboard_timer_init,
};
mx35_clocks_init();
}
-struct sys_timer mx35pdk_timer = {
+static struct sys_timer mx35pdk_timer = {
.init = mx35pdk_timer_init,
};
.init = mx51_efikamx_timer_init,
};
-MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
- /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
+MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)")
.atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init = mx51_efikasb_timer_init,
};
-MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
+MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)")
.atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
mx31_clocks_init(26000000);
}
-struct sys_timer pcm037_timer = {
+static struct sys_timer pcm037_timer = {
.init = pcm037_timer_init,
};
mx35_clocks_init();
}
-struct sys_timer pcm043_timer = {
+static struct sys_timer pcm043_timer = {
.init = pcm043_timer_init,
};
mx35_clocks_init();
}
-struct sys_timer vpr200_timer = {
+static struct sys_timer vpr200_timer = {
.init = vpr200_timer_init,
};
+++ /dev/null
-
-if ARCH_IXP2000
-
-config ARCH_SUPPORTS_BIG_ENDIAN
- bool
- default y
-
-menu "Intel IXP2400/2800 Implementation Options"
-
-comment "IXP2400/2800 Platforms"
-
-config ARCH_ENP2611
- bool "Support Radisys ENP-2611"
- help
- Say 'Y' here if you want your kernel to support the Radisys
- ENP2611 PCI network processing card. For more information on
- this card, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2400
- bool "Support Intel IXDP2400"
- help
- Say 'Y' here if you want your kernel to support the Intel
- IXDP2400 reference platform. For more information on
- this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2800
- bool "Support Intel IXDP2800"
- help
- Say 'Y' here if you want your kernel to support the Intel
- IXDP2800 reference platform. For more information on
- this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2X00
- bool
- depends on ARCH_IXDP2400 || ARCH_IXDP2800
- default y
-
-config ARCH_IXDP2401
- bool "Support Intel IXDP2401"
- help
- Say 'Y' here if you want your kernel to support the Intel
- IXDP2401 reference platform. For more information on
- this platform, see <file:Documentation/arm/IXP2000>.
-
-config ARCH_IXDP2801
- bool "Support Intel IXDP2801 and IXDP28x5"
- help
- Say 'Y' here if you want your kernel to support the Intel
- IXDP2801/2805/2855 reference platforms. For more information on
- this platform, see <file:Documentation/arm/IXP2000>.
-
-config MACH_IXDP28X5
- bool
- depends on ARCH_IXDP2801
- default y
-
-config ARCH_IXDP2X01
- bool
- depends on ARCH_IXDP2401 || ARCH_IXDP2801
- default y
-
-config IXP2000_SUPPORT_BROKEN_PCI_IO
- bool "Support broken PCI I/O on older IXP2000s"
- default y
- help
- Say 'N' here if you only intend to run your kernel on an
- IXP2000 B0 or later model and do not need the PCI I/O
- byteswap workaround. Say 'Y' otherwise.
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-obj-y := core.o pci.o
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_ARCH_ENP2611) += enp2611.o
-obj-$(CONFIG_ARCH_IXDP2400) += ixdp2400.o
-obj-$(CONFIG_ARCH_IXDP2800) += ixdp2800.o
-obj-$(CONFIG_ARCH_IXDP2X00) += ixdp2x00.o
-obj-$(CONFIG_ARCH_IXDP2X01) += ixdp2x01.o
-
+++ /dev/null
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/core.c
- *
- * Common routines used by all IXP2400/2800 based platforms.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (C) MontaVista Software, Inc.
- *
- * Based on work Copyright (C) 2002-2003 Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/gpio-ixp2000.h>
-
-static DEFINE_SPINLOCK(ixp2000_slowport_lock);
-static unsigned long ixp2000_slowport_irq_flags;
-
-/*************************************************************************
- * Slowport access routines
- *************************************************************************/
-void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg)
-{
- spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags);
-
- old_cfg->CCR = *IXP2000_SLOWPORT_CCR;
- old_cfg->WTC = *IXP2000_SLOWPORT_WTC2;
- old_cfg->RTC = *IXP2000_SLOWPORT_RTC2;
- old_cfg->PCR = *IXP2000_SLOWPORT_PCR;
- old_cfg->ADC = *IXP2000_SLOWPORT_ADC;
-
- ixp2000_reg_write(IXP2000_SLOWPORT_CCR, new_cfg->CCR);
- ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
- ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
- ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
- ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
-}
-
-void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
-{
- ixp2000_reg_write(IXP2000_SLOWPORT_CCR, old_cfg->CCR);
- ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
- ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
- ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
- ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
-
- spin_unlock_irqrestore(&ixp2000_slowport_lock,
- ixp2000_slowport_irq_flags);
-}
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP2000 systems
- *************************************************************************/
-static struct map_desc ixp2000_io_desc[] __initdata = {
- {
- .virtual = IXP2000_CAP_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
- .length = IXP2000_CAP_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_INTCTL_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
- .length = IXP2000_INTCTL_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_PCI_CREG_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
- .length = IXP2000_PCI_CREG_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_PCI_CSR_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
- .length = IXP2000_PCI_CSR_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_MSF_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
- .length = IXP2000_MSF_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_SCRATCH_RING_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_SCRATCH_RING_PHYS_BASE),
- .length = IXP2000_SCRATCH_RING_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_SRAM0_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_SRAM0_PHYS_BASE),
- .length = IXP2000_SRAM0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_PCI_IO_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
- .length = IXP2000_PCI_IO_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_PCI_CFG0_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
- .length = IXP2000_PCI_CFG0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = IXP2000_PCI_CFG1_VIRT_BASE,
- .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
- .length = IXP2000_PCI_CFG1_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-void __init ixp2000_map_io(void)
-{
- iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
-
- /* Set slowport to 8-bit mode. */
- ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
-}
-
-
-/*************************************************************************
- * Serial port support for IXP2000
- *************************************************************************/
-static struct plat_serial8250_port ixp2000_serial_port[] = {
- {
- .mapbase = IXP2000_UART_PHYS_BASE,
- .membase = (char *)(IXP2000_UART_VIRT_BASE + 3),
- .irq = IRQ_IXP2000_UART,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = 50000000,
- },
- { },
-};
-
-static struct resource ixp2000_uart_resource = {
- .start = IXP2000_UART_PHYS_BASE,
- .end = IXP2000_UART_PHYS_BASE + 0x1f,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixp2000_serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = ixp2000_serial_port,
- },
- .num_resources = 1,
- .resource = &ixp2000_uart_resource,
-};
-
-void __init ixp2000_uart_init(void)
-{
- platform_device_register(&ixp2000_serial_device);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP2000
- *************************************************************************/
-static unsigned ticks_per_jiffy;
-static unsigned ticks_per_usec;
-static unsigned next_jiffy_time;
-static volatile unsigned long *missing_jiffy_timer_csr;
-
-unsigned long ixp2000_gettimeoffset (void)
-{
- unsigned long offset;
-
- offset = next_jiffy_time - *missing_jiffy_timer_csr;
-
- return offset / ticks_per_usec;
-}
-
-static irqreturn_t ixp2000_timer_interrupt(int irq, void *dev_id)
-{
- /* clear timer 1 */
- ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
-
- while ((signed long)(next_jiffy_time - *missing_jiffy_timer_csr)
- >= ticks_per_jiffy) {
- timer_tick();
- next_jiffy_time -= ticks_per_jiffy;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction ixp2000_timer_irq = {
- .name = "IXP2000 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ixp2000_timer_interrupt,
-};
-
-void __init ixp2000_init_time(unsigned long tick_rate)
-{
- ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
- ticks_per_usec = tick_rate / 1000000;
-
- /*
- * We use timer 1 as our timer interrupt.
- */
- ixp2000_reg_write(IXP2000_T1_CLR, 0);
- ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
- ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
-
- /*
- * We use a second timer as a monotonic counter for tracking
- * missed jiffies. The IXP2000 has four timers, but if we're
- * on an A-step IXP2800, timer 2 and 3 don't work, so on those
- * chips we use timer 4. Timer 4 is the only timer that can
- * be used for the watchdog, so we use timer 2 if we're on a
- * non-buggy chip.
- */
- if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
- printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
-
- ixp2000_reg_write(IXP2000_T4_CLR, 0);
- ixp2000_reg_write(IXP2000_T4_CLD, -1);
- ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
- missing_jiffy_timer_csr = IXP2000_T4_CSR;
- } else {
- ixp2000_reg_write(IXP2000_T2_CLR, 0);
- ixp2000_reg_write(IXP2000_T2_CLD, -1);
- ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
- missing_jiffy_timer_csr = IXP2000_T2_CSR;
- }
- next_jiffy_time = 0xffffffff;
-
- /* register for interrupt */
- setup_irq(IRQ_IXP2000_TIMER1, &ixp2000_timer_irq);
-}
-
-/*************************************************************************
- * GPIO helpers
- *************************************************************************/
-static unsigned long GPIO_IRQ_falling_edge;
-static unsigned long GPIO_IRQ_rising_edge;
-static unsigned long GPIO_IRQ_level_low;
-static unsigned long GPIO_IRQ_level_high;
-
-static void update_gpio_int_csrs(void)
-{
- ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
- ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
- ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
- ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
-}
-
-void gpio_line_config(int line, int direction)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- if (direction == GPIO_OUT) {
- /* if it's an output, it ain't an interrupt anymore */
- GPIO_IRQ_falling_edge &= ~(1 << line);
- GPIO_IRQ_rising_edge &= ~(1 << line);
- GPIO_IRQ_level_low &= ~(1 << line);
- GPIO_IRQ_level_high &= ~(1 << line);
- update_gpio_int_csrs();
-
- ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
- } else if (direction == GPIO_IN) {
- ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
- }
- local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_line_config);
-
-
-/*************************************************************************
- * IRQ handling IXP2000
- *************************************************************************/
-static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- int i;
- unsigned long status = *IXP2000_GPIO_INST;
-
- for (i = 0; i <= 7; i++) {
- if (status & (1<<i)) {
- generic_handle_irq(i + IRQ_IXP2000_GPIO0);
- }
- }
-}
-
-static int ixp2000_GPIO_irq_type(struct irq_data *d, unsigned int type)
-{
- int line = d->irq - IRQ_IXP2000_GPIO0;
-
- /*
- * First, configure this GPIO line as an input.
- */
- ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
-
- /*
- * Then, set the proper trigger type.
- */
- if (type & IRQ_TYPE_EDGE_FALLING)
- GPIO_IRQ_falling_edge |= 1 << line;
- else
- GPIO_IRQ_falling_edge &= ~(1 << line);
- if (type & IRQ_TYPE_EDGE_RISING)
- GPIO_IRQ_rising_edge |= 1 << line;
- else
- GPIO_IRQ_rising_edge &= ~(1 << line);
- if (type & IRQ_TYPE_LEVEL_LOW)
- GPIO_IRQ_level_low |= 1 << line;
- else
- GPIO_IRQ_level_low &= ~(1 << line);
- if (type & IRQ_TYPE_LEVEL_HIGH)
- GPIO_IRQ_level_high |= 1 << line;
- else
- GPIO_IRQ_level_high &= ~(1 << line);
- update_gpio_int_csrs();
-
- return 0;
-}
-
-static void ixp2000_GPIO_irq_mask_ack(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-
- ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
- ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
- ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_mask(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static void ixp2000_GPIO_irq_unmask(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- ixp2000_reg_write(IXP2000_GPIO_INSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
-}
-
-static struct irq_chip ixp2000_GPIO_irq_chip = {
- .irq_ack = ixp2000_GPIO_irq_mask_ack,
- .irq_mask = ixp2000_GPIO_irq_mask,
- .irq_unmask = ixp2000_GPIO_irq_unmask,
- .irq_set_type = ixp2000_GPIO_irq_type,
-};
-
-static void ixp2000_pci_irq_mask(struct irq_data *d)
-{
- unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
- if (d->irq == IRQ_IXP2000_PCIA)
- ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
- else if (d->irq == IRQ_IXP2000_PCIB)
- ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
-}
-
-static void ixp2000_pci_irq_unmask(struct irq_data *d)
-{
- unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
- if (d->irq == IRQ_IXP2000_PCIA)
- ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 26)));
- else if (d->irq == IRQ_IXP2000_PCIB)
- ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
-}
-
-/*
- * Error interrupts. These are used extensively by the microengine drivers
- */
-static void ixp2000_err_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- int i;
- unsigned long status = *IXP2000_IRQ_ERR_STATUS;
-
- for(i = 31; i >= 0; i--) {
- if(status & (1 << i)) {
- generic_handle_irq(IRQ_IXP2000_DRAM0_MIN_ERR + i);
- }
- }
-}
-
-static void ixp2000_err_irq_mask(struct irq_data *d)
-{
- ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
- (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static void ixp2000_err_irq_unmask(struct irq_data *d)
-{
- ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
- (1 << (d->irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
-}
-
-static struct irq_chip ixp2000_err_irq_chip = {
- .irq_ack = ixp2000_err_irq_mask,
- .irq_mask = ixp2000_err_irq_mask,
- .irq_unmask = ixp2000_err_irq_unmask
-};
-
-static struct irq_chip ixp2000_pci_irq_chip = {
- .irq_ack = ixp2000_pci_irq_mask,
- .irq_mask = ixp2000_pci_irq_mask,
- .irq_unmask = ixp2000_pci_irq_unmask
-};
-
-static void ixp2000_irq_mask(struct irq_data *d)
-{
- ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << d->irq));
-}
-
-static void ixp2000_irq_unmask(struct irq_data *d)
-{
- ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << d->irq));
-}
-
-static struct irq_chip ixp2000_irq_chip = {
- .irq_ack = ixp2000_irq_mask,
- .irq_mask = ixp2000_irq_mask,
- .irq_unmask = ixp2000_irq_unmask
-};
-
-void __init ixp2000_init_irq(void)
-{
- int irq;
-
- /*
- * Mask all sources
- */
- ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, 0xffffffff);
- ixp2000_reg_write(IXP2000_FIQ_ENABLE_CLR, 0xffffffff);
-
- /* clear all GPIO edge/level detects */
- ixp2000_reg_write(IXP2000_GPIO_REDR, 0);
- ixp2000_reg_write(IXP2000_GPIO_FEDR, 0);
- ixp2000_reg_write(IXP2000_GPIO_LSHR, 0);
- ixp2000_reg_write(IXP2000_GPIO_LSLR, 0);
- ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
-
- /* clear PCI interrupt sources */
- ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
-
- /*
- * Certain bits in the IRQ status register of the
- * IXP2000 are reserved. Instead of trying to map
- * things non 1:1 from bit position to IRQ number,
- * we mark the reserved IRQs as invalid. This makes
- * our mask/unmask code much simpler.
- */
- for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) {
- if ((1 << irq) & IXP2000_VALID_IRQ_MASK) {
- irq_set_chip_and_handler(irq, &ixp2000_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- } else set_irq_flags(irq, 0);
- }
-
- for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
- if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
- IXP2000_VALID_ERR_IRQ_MASK) {
- irq_set_chip_and_handler(irq, &ixp2000_err_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
- else
- set_irq_flags(irq, 0);
- }
- irq_set_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
-
- for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) {
- irq_set_chip_and_handler(irq, &ixp2000_GPIO_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
- irq_set_chained_handler(IRQ_IXP2000_GPIO, ixp2000_GPIO_irq_handler);
-
- /*
- * Enable PCI irqs. The actual PCI[AB] decoding is done in
- * entry-macro.S, so we don't need a chained handler for the
- * PCI interrupt source.
- */
- ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << IRQ_IXP2000_PCI));
- for (irq = IRQ_IXP2000_PCIA; irq <= IRQ_IXP2000_PCIB; irq++) {
- irq_set_chip_and_handler(irq, &ixp2000_pci_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-}
-
-void ixp2000_restart(char mode, const char *cmd)
-{
- ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
-}
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/enp2611.c
- *
- * Radisys ENP-2611 support.
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
- * original version carries the following notices:
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * ENP-2611 timer tick configuration
- *************************************************************************/
-static void __init enp2611_timer_init(void)
-{
- ixp2000_init_time(50 * 1000 * 1000);
-}
-
-static struct sys_timer enp2611_timer = {
- .init = enp2611_timer_init,
- .offset = ixp2000_gettimeoffset,
-};
-
-
-/*************************************************************************
- * ENP-2611 I/O
- *************************************************************************/
-static struct map_desc enp2611_io_desc[] __initdata = {
- {
- .virtual = ENP2611_CALEB_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
- .length = ENP2611_CALEB_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ENP2611_PM3386_0_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
- .length = ENP2611_PM3386_0_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = ENP2611_PM3386_1_VIRT_BASE,
- .pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
- .length = ENP2611_PM3386_1_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-void __init enp2611_map_io(void)
-{
- ixp2000_map_io();
- iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
-}
-
-
-/*************************************************************************
- * ENP-2611 PCI
- *************************************************************************/
-static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
-{
- sys->mem_offset = 0xe0000000;
- ixp2000_pci_setup(nr, sys);
- return 1;
-}
-
-static void __init enp2611_pci_preinit(void)
-{
- ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
- ixp2000_pci_preinit();
- pcibios_setup("firmware");
-}
-
-static inline int enp2611_pci_valid_device(struct pci_bus *bus,
- unsigned int devfn)
-{
- /* The 82559 ethernet controller appears at both PCI:1:0:0 and
- * PCI:1:2:0, so let's pretend the second one isn't there.
- */
- if (bus->number == 0x01 && devfn == 0x10)
- return 0;
-
- return 1;
-}
-
-static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
-{
- if (enp2611_pci_valid_device(bus, devfn))
- return ixp2000_pci_read_config(bus, devfn, where, size, value);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- if (enp2611_pci_valid_device(bus, devfn))
- return ixp2000_pci_write_config(bus, devfn, where, size, value);
-
- return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops enp2611_pci_ops = {
- .read = enp2611_pci_read_config,
- .write = enp2611_pci_write_config
-};
-
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
- struct pci_sys_data *sys)
-{
- return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
- &sys->resources);
-}
-
-static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- int irq;
-
- if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
- /* IXP2400. */
- irq = IRQ_IXP2000_PCIA;
- } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
- /* 21555 non-transparent bridge. */
- irq = IRQ_IXP2000_PCIB;
- } else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
- /* PCI2050B transparent bridge. */
- irq = -1;
- } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
- /* 82559 ethernet. */
- irq = IRQ_IXP2000_PCIA;
- } else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
- /* SPI-3 option board. */
- irq = IRQ_IXP2000_PCIB;
- } else {
- printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
- "device PCI:%d:%d:%d\n", dev->bus->number,
- PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
- irq = -1;
- }
-
- return irq;
-}
-
-struct hw_pci enp2611_pci __initdata = {
- .nr_controllers = 1,
- .setup = enp2611_pci_setup,
- .preinit = enp2611_pci_preinit,
- .scan = enp2611_pci_scan_bus,
- .map_irq = enp2611_pci_map_irq,
-};
-
-int __init enp2611_pci_init(void)
-{
- if (machine_is_enp2611())
- pci_common_init(&enp2611_pci);
-
- return 0;
-}
-
-subsys_initcall(enp2611_pci_init);
-
-
-/*************************************************************************
- * ENP-2611 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data enp2611_flash_platform_data = {
- .map_name = "cfi_probe",
- .width = 1,
-};
-
-static struct ixp2000_flash_data enp2611_flash_data = {
- .platform_data = &enp2611_flash_platform_data,
- .nr_banks = 1
-};
-
-static struct resource enp2611_flash_resource = {
- .start = 0xc4000000,
- .end = 0xc4000000 + 0x00ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device enp2611_flash = {
- .name = "IXP2000-Flash",
- .id = 0,
- .dev = {
- .platform_data = &enp2611_flash_data,
- },
- .num_resources = 1,
- .resource = &enp2611_flash_resource,
-};
-
-static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
- .sda_pin = ENP2611_GPIO_SDA,
- .scl_pin = ENP2611_GPIO_SCL,
-};
-
-static struct platform_device enp2611_i2c_controller = {
- .name = "IXP2000-I2C",
- .id = 0,
- .dev = {
- .platform_data = &enp2611_i2c_gpio_pins
- },
- .num_resources = 0
-};
-
-static struct platform_device *enp2611_devices[] __initdata = {
- &enp2611_flash,
- &enp2611_i2c_controller
-};
-
-static void __init enp2611_init_machine(void)
-{
- platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
- ixp2000_uart_init();
-}
-
-
-MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .atag_offset = 0x100,
- .map_io = enp2611_map_io,
- .init_irq = ixp2000_init_irq,
- .timer = &enp2611_timer,
- .init_machine = enp2611_init_machine,
- .restart = ixp2000_restart,
-MACHINE_END
-
-
+++ /dev/null
-/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x00030000
-#ifdef __ARMEB__
- orr \rp, \rp, #0x00000003
-#endif
- orr \rv, \rp, #0xfe000000 @ virtual base
- orr \rv, \rv, #0x00f00000
- orr \rp, \rp, #0xc0000000 @ Physical base
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/enp2611.h
- *
- * Register and other defines for Radisys ENP-2611
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
- * original version carries the following notices:
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ENP2611_H
-#define __ENP2611_H
-
-#define ENP2611_CALEB_PHYS_BASE 0xc5000000
-#define ENP2611_CALEB_VIRT_BASE 0xfe000000
-#define ENP2611_CALEB_SIZE 0x00100000
-
-#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000
-#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000
-#define ENP2611_PM3386_0_SIZE 0x00100000
-
-#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000
-#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000
-#define ENP2611_PM3386_1_SIZE 0x00100000
-
-#define ENP2611_GPIO_SCL 7
-#define ENP2611_GPIO_SDA 6
-
-#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4
-#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3
-#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2
-#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1
-#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IXP2000-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/irqs.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \irqnr, #0x0 @clear out irqnr as default
- mov \base, #0xfe000000
- orr \base, \base, #0x00e00000
- orr \base, \base, #0x08
- ldr \irqstat, [\base] @ get interrupts
-
- cmp \irqstat, #0
- beq 1001f
-
- clz \irqnr, \irqstat
- mov \base, #31
- subs \irqnr, \base, \irqnr
-
- /*
- * We handle PCIA and PCIB here so we don't have an
- * extra layer of code just to check these two bits.
- */
- cmp \irqnr, #IRQ_IXP2000_PCI
- bne 1001f
-
- mov \base, #0xfe000000
- orr \base, \base, #0x00c00000
- orr \base, \base, #0x00000100
- orr \base, \base, #0x00000058
- ldr \irqstat, [\base]
-
- mov \tmp, #(1<<26)
- tst \irqstat, \tmp
- movne \irqnr, #IRQ_IXP2000_PCIA
- bne 1001f
-
- mov \tmp, #(1<<27)
- tst \irqstat, \tmp
- movne \irqnr, #IRQ_IXP2000_PCIB
-
-1001:
- .endm
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/gpio.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software, you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * IXP2000 GPIO in/out, edge/level detection for IRQs:
- * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.
- * This must be called *before* the corresponding IRQ is registerd.
- * Use this instead of directly setting the GPIO registers.
- * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#ifndef __ASSEMBLY__
-
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-#define IXP2000_GPIO_LOW 0
-#define IXP2000_GPIO_HIGH 1
-
-extern void gpio_line_config(int line, int direction);
-
-static inline int gpio_line_get(int line)
-{
- return (((*IXP2000_GPIO_PLR) >> line) & 1);
-}
-
-static inline void gpio_line_set(int line, int value)
-{
- if (value == IXP2000_GPIO_HIGH) {
- ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
- } else if (value == IXP2000_GPIO_LOW) {
- ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
- }
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/hardware.h
- *
- * Hardware definitions for IXP2400/2800 based systems
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright (C) 2001-2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#include "ixp2000-regs.h" /* Chipset Registers */
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific bits
- */
-#include "enp2611.h" /* ENP-2611 */
-#include "ixdp2x00.h" /* IXDP2400/2800 */
-#include "ixdp2x01.h" /* IXDP2401/2801 */
-
-#endif /* _ASM_ARCH_HARDWARE_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
- * transactions the other way round (MEM transactions don't have this
- * issue), so if we want to support those models, we need to override
- * the standard I/O functions.
- *
- * B0 and later have a bit that can be set to 1 to get the proper
- * behavior for I/O transactions, which then allows us to use the
- * standard I/O functions. This is what we do if the user does not
- * explicitly ask for support for pre-B0.
- */
-#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-
-#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
-#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
-
-#define outb(v,p) __raw_writeb((v),alignb(___io(p)))
-#define outw(v,p) __raw_writew((v),alignw(___io(p)))
-#define outl(v,p) __raw_writel((v),___io(p))
-
-#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
-#define inw(p) \
- ({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
-#define inl(p) \
- ({ unsigned int __v = (__raw_readl(___io(p))); __v; })
-
-#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l)
-#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l)
-#define outsl(p,d,l) __raw_writesl(___io(p),d,l)
-
-#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l)
-#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l)
-#define insl(p,d,l) __raw_readsl(___io(p),d,l)
-
-#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
-
-#define ioread8(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readb(alignb(p)); \
- } else { \
- __v = __raw_readb(p); \
- } \
- \
- __v; \
- }) \
-
-#define ioread16(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readw(alignw(p)); \
- } else { \
- __v = le16_to_cpu(__raw_readw(p)); \
- } \
- \
- __v; \
- })
-
-#define ioread32(p) \
- ({ \
- unsigned int __v; \
- \
- if (__is_io_address(p)) { \
- __v = __raw_readl(p); \
- } else { \
- __v = le32_to_cpu(__raw_readl(p)); \
- } \
- \
- __v; \
- })
-
-#define iowrite8(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writeb((v), alignb(p)); \
- } else { \
- __raw_writeb((v), p); \
- } \
- })
-
-#define iowrite16(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writew((v), alignw(p)); \
- } else { \
- __raw_writew(cpu_to_le16(v), p); \
- } \
- })
-
-#define iowrite32(v,p) \
- ({ \
- if (__is_io_address(p)) { \
- __raw_writel((v), p); \
- } else { \
- __raw_writel(cpu_to_le32(v), p); \
- } \
- })
-
-#define ioport_map(port, nr) ___io(port)
-
-#define ioport_unmap(addr)
-#else
-#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
-#endif
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/irqs.h
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _IRQS_H
-#define _IRQS_H
-
-/*
- * Do NOT add #ifdef MACHINE_FOO in here.
- * Simpy add your machine IRQs here and increase NR_IRQS if needed to
- * hold your machine's IRQ table.
- */
-
-/*
- * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
- * register has those bit reserved. We just mark those interrupts
- * as invalid and this allows us to do mask/unmask with a single
- * shift operation instead of having to map the IRQ number to
- * a HW IRQ number.
- */
-#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */
-#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/
-#define IRQ_IXP2000_UART 2
-#define IRQ_IXP2000_GPIO 3
-#define IRQ_IXP2000_TIMER1 4
-#define IRQ_IXP2000_TIMER2 5
-#define IRQ_IXP2000_TIMER3 6
-#define IRQ_IXP2000_TIMER4 7
-#define IRQ_IXP2000_PMU 8
-#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */
-#define IRQ_IXP2000_DMA1 10
-#define IRQ_IXP2000_DMA2 11
-#define IRQ_IXP2000_DMA3 12
-#define IRQ_IXP2000_PCI_DOORBELL 13
-#define IRQ_IXP2000_ME_ATTN 14
-#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */
-#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */
-#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */
-#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */
-#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */
-#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */
-#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */
-#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */
-#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */
-
-/* define generic GPIOs */
-#define IRQ_IXP2000_GPIO0 32
-#define IRQ_IXP2000_GPIO1 33
-#define IRQ_IXP2000_GPIO2 34
-#define IRQ_IXP2000_GPIO3 35
-#define IRQ_IXP2000_GPIO4 36
-#define IRQ_IXP2000_GPIO5 37
-#define IRQ_IXP2000_GPIO6 38
-#define IRQ_IXP2000_GPIO7 39
-
-/* split off the 2 PCI sources */
-#define IRQ_IXP2000_PCIA 40
-#define IRQ_IXP2000_PCIB 41
-
-/* Int sources from IRQ_ERROR_STATUS */
-#define IRQ_IXP2000_DRAM0_MIN_ERR 42
-#define IRQ_IXP2000_DRAM0_MAJ_ERR 43
-#define IRQ_IXP2000_DRAM1_MIN_ERR 44
-#define IRQ_IXP2000_DRAM1_MAJ_ERR 45
-#define IRQ_IXP2000_DRAM2_MIN_ERR 46
-#define IRQ_IXP2000_DRAM2_MAJ_ERR 47
-/* 48-57 reserved */
-#define IRQ_IXP2000_SRAM0_ERR 58
-#define IRQ_IXP2000_SRAM1_ERR 59
-#define IRQ_IXP2000_SRAM2_ERR 60
-#define IRQ_IXP2000_SRAM3_ERR 61
-/* 62-65 reserved */
-#define IRQ_IXP2000_MEDIA_ERR 66
-#define IRQ_IXP2000_PCI_ERR 67
-#define IRQ_IXP2000_SP_INT 68
-
-#define NR_IXP2000_IRQS 69
-
-#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x))
-
-#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS))
-
-#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
-#define IXP2000_VALID_ERR_IRQ_MASK (\
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
- IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) )
-
-/*
- * This allows for all the on-chip sources plus up to 32 CPLD based
- * IRQs. Should be more than enough.
- */
-#define IXP2000_BOARD_IRQS 32
-#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
-
-
-/*
- * IXDP2400 specific IRQs
- */
-#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7)
-
-#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1)
-#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS
-
-/* IXDP2800 specific IRQs */
-#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1)
-#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5)
-
-#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1)
-#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS
-
-/*
- * IRQs on both IXDP2x01 boards
- */
-#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2)
-#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3)
-#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4)
-#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5)
-#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6)
-#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7)
-#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8)
-#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16)
-#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17)
-#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18)
-#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19)
-#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21)
-#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22)
-#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24)
-#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25)
-#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26)
-
-#define IXDP2X01_VALID_IRQ_MASK ( \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
-
-/*
- * IXDP2401 specific IRQs
- */
-#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1)
-
-#define IXDP2401_VALID_IRQ_MASK ( \
- IXDP2X01_VALID_IRQ_MASK | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
-
-/*
- * IXDP2801-specific IRQs
- */
-#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0)
-#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27)
-#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28)
-
-#define IXDP2801_VALID_IRQ_MASK ( \
- IXDP2X01_VALID_IRQ_MASK | \
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
- IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
-
-#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1)
-
-#endif /*_IRQS_H*/
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
- *
- * Register and other defines for IXDP2[48]00 platforms
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _IXDP2X00_H_
-#define _IXDP2X00_H_
-
-/*
- * On board CPLD memory map
- */
-#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000
-#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000
-#define IXDP2X00_CPLD_SIZE 0x00100000
-
-
-#define IXDP2X00_CPLD_REG(x) \
- (volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
-
-/*
- * IXDP2400 CPLD registers
- */
-#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0)
-#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4)
-#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8)
-#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc)
-#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10)
-#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14)
-#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18)
-#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48)
-
-/*
- * IXDP2800 CPLD registers
- */
-#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0)
-#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140)
-
-
-#define IXDP2X00_GPIO_I2C_ENABLE 0x02
-#define IXDP2X00_GPIO_SCL 0x07
-#define IXDP2X00_GPIO_SDA 0x06
-
-/*
- * PCI devfns for on-board devices. We need these to be able to
- * properly translate IRQs and for device removal.
- */
-#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */
-#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */
-#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */
-#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
-
-#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */
-#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */
-#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
-
-#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */
-#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */
-#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */
-#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */
-#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */
-
-#ifndef __ASSEMBLY__
-/*
- * The master NPU is always PCI master.
- */
-static inline unsigned int ixdp2x00_master_npu(void)
-{
- return !!ixp2000_is_pcimaster();
-}
-
-/*
- * Helper functions used by ixdp2400 and ixdp2800 specific code
- */
-void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
-void ixdp2x00_slave_pci_postinit(void);
-void ixdp2x00_init_machine(void);
-void ixdp2x00_map_io(void);
-
-#endif
-
-#endif /*_IXDP2X00_H_ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
- *
- * Platform definitions for IXDP2X01 && IXDP2801 systems
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc.
- *
- * Based on original code Copyright (c) 2002-2003 Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __IXDP2X01_H__
-#define __IXDP2X01_H__
-
-#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000
-#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000
-#define IXDP2X01_CPLD_REGION_SIZE 0x00100000
-
-#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
-#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
-
-#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40)
-#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40)
-
-#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60)
-#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60)
-
-#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80)
-#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16)
-
-#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00)
-#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08)
-#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C)
-#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10)
-#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG
-#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14)
-
-#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20)
-
-#define IXDP2X01_CPLD_FLASH_INTERN 0x8000
-#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF
-#define IXDP2X01_FLASH_WINDOW_BITS 25
-#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS)
-#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1)
-
-#define IXDP2X01_UART_CLK 1843200
-
-#define IXDP2X01_GPIO_I2C_ENABLE 0x02
-#define IXDP2X01_GPIO_SCL 0x07
-#define IXDP2X01_GPIO_SDA 0x06
-
-#endif /* __IXDP2x01_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
- *
- * Chipset register definitions for IXP2400/2800 based systems.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#ifndef _IXP2000_REGS_H_
-#define _IXP2000_REGS_H_
-
-/*
- * IXP2000 linux memory map:
- *
- * virt phys size
- * fb000000 db000000 16M PCI CFG1
- * fc000000 da000000 16M PCI CFG0
- * fd000000 d8000000 16M PCI I/O
- * fe[0-7]00000 8M per-platform mappings
- * fe900000 80000000 1M SRAM #0 (first MB)
- * fea00000 cb400000 1M SCRATCH ring get/put
- * feb00000 c8000000 1M MSF
- * fec00000 df000000 1M PCI CSRs
- * fed00000 de000000 1M PCI CREG
- * fee00000 d6000000 1M INTCTL
- * fef00000 c0000000 1M CAP
- */
-
-/*
- * Static I/O regions.
- *
- * Most of the registers are clumped in 4K regions spread throughout
- * the 0xc0000000 -> 0xc0100000 address range, but we just map in
- * the whole range using a single 1 MB section instead of small
- * 4K pages.
- *
- * CAP stands for CSR Access Proxy.
- *
- * If you change the virtual address of this mapping, please propagate
- * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
- * address of the UART located in this region.
- */
-
-#define IXP2000_CAP_PHYS_BASE 0xc0000000
-#define IXP2000_CAP_VIRT_BASE 0xfef00000
-#define IXP2000_CAP_SIZE 0x00100000
-
-/*
- * Addresses for specific on-chip peripherals.
- */
-#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000
-#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000
-#define IXP2000_UART_PHYS_BASE 0xc0030000
-#define IXP2000_UART_VIRT_BASE 0xfef30000
-#define IXP2000_TIMER_VIRT_BASE 0xfef20000
-#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000
-#define IXP2000_GPIO_VIRT_BASE 0xfef10000
-
-/*
- * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual
- * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
- * entry-macro.S, so if you ever change these please propagate
- * the change.
- */
-#define IXP2000_INTCTL_PHYS_BASE 0xd6000000
-#define IXP2000_INTCTL_VIRT_BASE 0xfee00000
-#define IXP2000_INTCTL_SIZE 0x00100000
-
-#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000
-#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000
-#define IXP2000_PCI_CREG_SIZE 0x00100000
-
-#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000
-#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000
-#define IXP2000_PCI_CSR_SIZE 0x00100000
-
-#define IXP2000_MSF_PHYS_BASE 0xc8000000
-#define IXP2000_MSF_VIRT_BASE 0xfeb00000
-#define IXP2000_MSF_SIZE 0x00100000
-
-#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000
-#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000
-#define IXP2000_SCRATCH_RING_SIZE 0x00100000
-
-#define IXP2000_SRAM0_PHYS_BASE 0x80000000
-#define IXP2000_SRAM0_VIRT_BASE 0xfe900000
-#define IXP2000_SRAM0_SIZE 0x00100000
-
-#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000
-#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000
-#define IXP2000_PCI_IO_SIZE 0x01000000
-
-#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000
-#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000
-#define IXP2000_PCI_CFG0_SIZE 0x01000000
-
-#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000
-#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000
-#define IXP2000_PCI_CFG1_SIZE 0x01000000
-
-/*
- * Timers
- */
-#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
-/* Timer control */
-#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00)
-#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04)
-#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08)
-#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c)
-/* Store initial value */
-#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10)
-#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14)
-#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18)
-#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c)
-/* Read current value */
-#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20)
-#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24)
-#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28)
-#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c)
-/* Clear associated timer interrupt */
-#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30)
-#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34)
-#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38)
-#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c)
-/* Timer watchdog enable for T4 */
-#define IXP2000_TWDE IXP2000_TIMER_REG(0x40)
-
-#define WDT_ENABLE 0x00000001
-#define TIMER_DIVIDER_256 0x00000008
-#define TIMER_ENABLE 0x00000080
-#define IRQ_MASK_TIMER1 (1 << 4)
-
-/*
- * Interrupt controller registers
- */
-#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
-#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08)
-#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10)
-#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18)
-#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14)
-#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24)
-#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c)
-#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30)
-#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68)
-#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88)
-#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c)
-#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0)
-#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4)
-#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8)
-#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec)
-#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100)
-#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104)
-#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108)
-#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168)
-#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188)
-#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208)
-#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c)
-
-/*
- * Mask of valid IRQs in the 32-bit IRQ register. We use
- * this to mark certain IRQs as being invalid.
- */
-#define IXP2000_VALID_IRQ_MASK 0x0f0fffff
-
-/*
- * PCI config register access from core
- */
-#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
-#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04)
-#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10)
-#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14)
-#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18)
-
-/*
- * PCI CSRs
- */
-#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
-
-/*
- * PCI outbound interrupts
- */
-#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30)
-#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34)
-/*
- * PCI communications
- */
-#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50)
-#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54)
-#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58)
-#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C)
-#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60)
-#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64)
-#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70)
-#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74)
-
-/*
- * DMA engines
- */
-#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80)
-#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84)
-#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88)
-#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C)
-#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90)
-#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94)
-#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0)
-#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4)
-#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8)
-#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC)
-#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0)
-#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4)
-#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0)
-#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4)
-#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8)
-#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC)
-#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0)
-#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4)
-#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0)
-/*
- * Size masks for BARs
- */
-#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC)
-#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100)
-/*
- * Control and uEngine related
- */
-#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C)
-#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140)
-#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148)
-#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C)
-#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150)
-#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154)
-/*
- * Inbound PCI interrupt control
- */
-#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158)
-#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C)
-
-#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */
-#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */
-
-/* These are from the IRQ register in the PCI ISR register */
-#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */
-#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */
-#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */
-#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */
-#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */
-
-#define IXP2000_PCI_RST_REL (1 << 2)
-#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
-#define CFG_PCI_BOOT_HOST (1 << 2)
-#define CFG_BOOT_PROM (1 << 1)
-
-/*
- * SlowPort CSRs
- *
- * The slowport is used to access things like flash, SONET framer control
- * ports, slave microprocessors, CPLDs, and others of chip memory mapped
- * peripherals.
- */
-#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
-
-#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00)
-#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04)
-#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08)
-#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c)
-#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10)
-#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14)
-#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18)
-#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C)
-#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20)
-#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24)
-#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28)
-
-/*
- * CCR values.
- * The CCR configures the clock division for the slowport interface.
- */
-#define SLOWPORT_CCR_DIV_1 0x00
-#define SLOWPORT_CCR_DIV_2 0x01
-#define SLOWPORT_CCR_DIV_4 0x02
-#define SLOWPORT_CCR_DIV_6 0x03
-#define SLOWPORT_CCR_DIV_8 0x04
-#define SLOWPORT_CCR_DIV_10 0x05
-#define SLOWPORT_CCR_DIV_12 0x06
-#define SLOWPORT_CCR_DIV_14 0x07
-#define SLOWPORT_CCR_DIV_16 0x08
-#define SLOWPORT_CCR_DIV_18 0x09
-#define SLOWPORT_CCR_DIV_20 0x0a
-#define SLOWPORT_CCR_DIV_22 0x0b
-#define SLOWPORT_CCR_DIV_24 0x0c
-#define SLOWPORT_CCR_DIV_26 0x0d
-#define SLOWPORT_CCR_DIV_28 0x0e
-#define SLOWPORT_CCR_DIV_30 0x0f
-
-/*
- * PCR values. PCR configure the mode of the interface.
- */
-#define SLOWPORT_MODE_FLASH 0x00
-#define SLOWPORT_MODE_LUCENT 0x01
-#define SLOWPORT_MODE_PMC_SIERRA 0x02
-#define SLOWPORT_MODE_INTEL_UP 0x03
-#define SLOWPORT_MODE_MOTOROLA_UP 0x04
-
-/*
- * ADC values. Defines data and address bus widths.
- */
-#define SLOWPORT_ADDR_WIDTH_8 0x00
-#define SLOWPORT_ADDR_WIDTH_16 0x01
-#define SLOWPORT_ADDR_WIDTH_24 0x02
-#define SLOWPORT_ADDR_WIDTH_32 0x03
-#define SLOWPORT_DATA_WIDTH_8 0x00
-#define SLOWPORT_DATA_WIDTH_16 0x10
-#define SLOWPORT_DATA_WIDTH_24 0x20
-#define SLOWPORT_DATA_WIDTH_32 0x30
-
-/*
- * Masks and shifts for various fields in the WTC and RTC registers.
- */
-#define SLOWPORT_WRTC_MASK_HD 0x0003
-#define SLOWPORT_WRTC_MASK_PW 0x003c
-#define SLOWPORT_WRTC_MASK_SU 0x03c0
-
-#define SLOWPORT_WRTC_SHIFT_HD 0x00
-#define SLOWPORT_WRTC_SHIFT_SU 0x02
-#define SLOWPORT_WRTC_SHFIT_PW 0x06
-
-
-/*
- * GPIO registers & GPIO interface.
- */
-#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
-#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00)
-#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04)
-#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08)
-#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c)
-#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10)
-#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14)
-#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18)
-#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c)
-#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20)
-#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24)
-#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28)
-#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c)
-#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30)
-#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34)
-#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38)
-#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c)
-#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40)
-
-/*
- * "Global" registers...whatever that's supposed to mean.
- */
-#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
-#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x))
-
-#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000
-#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000
-#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00
-#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200
-#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100
-#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000
-#define IXP2000_MAJ_REV_MASK 0x000000F0
-#define IXP2000_MIN_REV_MASK 0x0000000F
-#define IXP2000_PROD_ID_MASK 0xFFFFFFFF
-
-#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00)
-#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04)
-#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08)
-#define IXP2000_RESET0 GLOBAL_REG(0x0c)
-#define IXP2000_RESET1 GLOBAL_REG(0x10)
-#define IXP2000_CCR GLOBAL_REG(0x14)
-#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18)
-
-#define RSTALL (1 << 16)
-#define WDT_RESET_ENABLE 0x01000000
-
-
-/*
- * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
- * units, but the registers that differ between the two don't overlap,
- * so we can have one register list for both.
- */
-#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
-#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
-#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
-#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
-#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
-#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
-#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
-#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
-#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
-#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
-#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
-#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
-#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
-#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
-#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
-#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
-#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
-#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
-#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
-#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
-#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
-#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
-#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
-#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
-#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
-#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
-#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
-#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
-#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
-#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
-#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
-#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
-
-
-#endif /* _IXP2000_H_ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/memory.h
- *
- * Copyright (c) 2002 Intel Corp.
- * Copyright (c) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#include <mach/ixp2000-regs.h>
-
-#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
-
-#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
-
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
- return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-/*
- * On the IXP2400, we can't use XCB=000 due to chip bugs. We use
- * XCB=101 instead, but that makes all I/O accesses bufferable. This
- * is not a problem in general, but we do have to be slightly more
- * careful because I/O writes are no longer automatically flushed out
- * of the write buffer.
- *
- * In cases where we want to make sure that a write has been flushed
- * out of the write buffer before we proceed, for example when masking
- * a device interrupt before re-enabling IRQs in CPSR, we can use this
- * function, ixp2000_reg_wrb, which performs a write, a readback, and
- * issues a dummy instruction dependent on the value of the readback
- * (mov rX, rX) to make sure that the readback has completed before we
- * continue.
- */
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
- unsigned long dummy;
-
- *((volatile unsigned long *)reg) = val;
-
- dummy = *((volatile unsigned long *)reg);
- __asm__ __volatile__("mov %0, %0" : "+r" (dummy));
-}
-
-/*
- * Boards may multiplex different devices on the 2nd channel of
- * the slowport interface that each need different configuration
- * settings. For example, the IXDP2400 uses channel 2 on the interface
- * to access the CPLD, the switch fabric card, and the media card. Each
- * one needs a different mode so drivers must save/restore the mode
- * before and after each operation.
- *
- * acquire_slowport(&your_config);
- * ...
- * do slowport operations
- * ...
- * release_slowport();
- *
- * Note that while you have the slowport, you are holding a spinlock,
- * so your code should be written as if you explicitly acquired a lock.
- *
- * The configuration only affects device 2 on the slowport, so the
- * MTD map driver does not acquire/release the slowport.
- */
-struct slowport_cfg {
- unsigned long CCR; /* Clock divide */
- unsigned long WTC; /* Write Timing Control */
- unsigned long RTC; /* Read Timing Control */
- unsigned long PCR; /* Protocol Control Register */
- unsigned long ADC; /* Address/Data Width Control */
-};
-
-
-void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
-void ixp2000_release_slowport(struct slowport_cfg *);
-
-/*
- * IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires
- * tweaking of addresses in the MTD driver.
- */
-static inline unsigned ixp2000_has_broken_slowport(void)
-{
- unsigned long id = *IXP2000_PRODUCT_ID;
- unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
- IXP2000_MIN_PROD_TYPE_MASK);
- return (((id_prod ==
- /* fixed in IXP2400-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2400)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
- ((id_prod ==
- /* fixed in IXP2800-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2800)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
- ((id_prod ==
- /* fixed in IXP2850-B0 */
- (IXP2000_MAJ_PROD_TYPE_IXP2000 |
- IXP2000_MIN_PROD_TYPE_IXP2850)) &&
- ((id & IXP2000_MAJ_REV_MASK) == 0)));
-}
-
-static inline unsigned int ixp2000_has_flash(void)
-{
- return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
-}
-
-static inline unsigned int ixp2000_is_pcimaster(void)
-{
- return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
-}
-
-void ixp2000_map_io(void);
-void ixp2000_uart_init(void);
-void ixp2000_init_irq(void);
-void ixp2000_init_time(unsigned long);
-void ixp2000_restart(char, const char *);
-unsigned long ixp2000_gettimeoffset(void);
-
-struct pci_sys_data;
-
-u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
-void ixp2000_pci_preinit(void);
-int ixp2000_pci_setup(int, struct pci_sys_data*);
-struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
-int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
-int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
-
-/*
- * Several of the IXP2000 systems have banked flash so we need to extend the
- * flash_platform_data structure with some private pointers
- */
-struct ixp2000_flash_data {
- struct flash_platform_data *platform_data;
- int nr_banks;
- unsigned long (*bank_setup)(unsigned long);
-};
-
-struct ixp2000_i2c_pins {
- unsigned long sda_pin;
- unsigned long scl_pin;
-};
-
-
-#endif /* !__ASSEMBLY__ */
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/timex.h
- *
- * IXP2000 architecture timex specifications
- */
-
-
-/*
- * Default clock is 50MHz APB, but platform code can override this
- */
-#define CLOCK_TICK_RATE 50000000
-
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/include/mach/uncompress.h
- *
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/serial_reg.h>
-
-#define UART_BASE 0xc0030000
-
-#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x))
-
-#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */
-#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/
-#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/
-#define UARTIER PHYS(0x04) /* Interrupt enable reg */
-#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/
-#define UARTLCR PHYS(0x0c) /* Control reg */
-#define UARTSR PHYS(0x14) /* Status reg */
-
-
-static inline void putc(int c)
-{
- int j = 0x1000;
-
- while (--j && !(*UARTSR & UART_LSR_THRE))
- barrier();
-
- *UARTDR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/ixdp2400.c
- *
- * IXDP2400 platform support
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2400 timer tick
- *************************************************************************/
-static void __init ixdp2400_timer_init(void)
-{
- int numerator, denominator;
- int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
-
- numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
- denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
-
- ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
-}
-
-static struct sys_timer ixdp2400_timer = {
- .init = ixdp2400_timer_init,
- .offset = ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2400 PCI
- *************************************************************************/
-void __init ixdp2400_pci_preinit(void)
-{
- ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
- ixp2000_pci_preinit();
- pcibios_setup("firmware");
-}
-
-int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
-{
- sys->mem_offset = 0xe0000000;
-
- ixp2000_pci_setup(nr, sys);
-
- return 1;
-}
-
-static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- if (ixdp2x00_master_npu()) {
-
- /*
- * Root bus devices. Slave NPU is only one with interrupt.
- * Everything else, we just return -1 b/c nothing else
- * on the root bus has interrupts.
- */
- if(!dev->bus->self) {
- if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
- return IRQ_IXDP2400_INGRESS_NPU;
-
- return -1;
- }
-
- /*
- * Bridge behind the PMC slot.
- * NOTE: Only INTA from the PMC slot is routed. VERY BAD.
- */
- if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
- dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
- !dev->bus->parent->self->bus->parent)
- return IRQ_IXDP2400_PMC;
-
- /*
- * Device behind the first bridge
- */
- if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
- switch(dev->devfn) {
- case IXDP2400_MASTER_ENET_DEVFN:
- return IRQ_IXDP2400_ENET;
-
- case IXDP2400_MEDIA_DEVFN:
- return IRQ_IXDP2400_MEDIA_PCI;
-
- case IXDP2400_SWITCH_FABRIC_DEVFN:
- return IRQ_IXDP2400_SF_PCI;
-
- case IXDP2X00_PMC_DEVFN:
- return IRQ_IXDP2400_PMC;
- }
- }
-
- return -1;
- } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-
-static void ixdp2400_pci_postinit(void)
-{
- struct pci_dev *dev;
-
- if (ixdp2x00_master_npu()) {
- dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
- } else {
- dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
-
- ixdp2x00_slave_pci_postinit();
- }
-}
-
-static struct hw_pci ixdp2400_pci __initdata = {
- .nr_controllers = 1,
- .setup = ixdp2400_pci_setup,
- .preinit = ixdp2400_pci_preinit,
- .postinit = ixdp2400_pci_postinit,
- .scan = ixp2000_pci_scan_bus,
- .map_irq = ixdp2400_pci_map_irq,
-};
-
-int __init ixdp2400_pci_init(void)
-{
- if (machine_is_ixdp2400())
- pci_common_init(&ixdp2400_pci);
-
- return 0;
-}
-
-subsys_initcall(ixdp2400_pci_init);
-
-void __init ixdp2400_init_irq(void)
-{
- ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
-}
-
-MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .atag_offset = 0x100,
- .map_io = ixdp2x00_map_io,
- .init_irq = ixdp2400_init_irq,
- .timer = &ixdp2400_timer,
- .init_machine = ixdp2x00_init_machine,
- .restart = ixp2000_restart,
-MACHINE_END
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/ixdp2800.c
- *
- * IXDP2800 platform support
- *
- * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2800 timer tick
- *************************************************************************/
-
-static void __init ixdp2800_timer_init(void)
-{
- ixp2000_init_time(50000000);
-}
-
-static struct sys_timer ixdp2800_timer = {
- .init = ixdp2800_timer_init,
- .offset = ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2800 PCI
- *************************************************************************/
-static void __init ixdp2800_slave_disable_pci_master(void)
-{
- *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-static void __init ixdp2800_master_wait_for_slave(void)
-{
- volatile u32 *addr;
-
- printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
- "its BAR sizes\n");
-
- addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
- PCI_BASE_ADDRESS_1);
- do {
- *addr = 0xffffffff;
- cpu_relax();
- } while (*addr != 0xfe000008);
-
- addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
- PCI_BASE_ADDRESS_2);
- do {
- *addr = 0xffffffff;
- cpu_relax();
- } while (*addr != 0xc0000008);
-
- /*
- * Configure the slave's SDRAM BAR by hand.
- */
- *addr = 0x40000008;
-}
-
-static void __init ixdp2800_slave_wait_for_master_enable(void)
-{
- printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
-
- while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
- cpu_relax();
-}
-
-void __init ixdp2800_pci_preinit(void)
-{
- printk("ixdp2x00_pci_preinit called\n");
-
- *IXP2000_PCI_ADDR_EXT = 0x0001e000;
-
- if (!ixdp2x00_master_npu())
- ixdp2800_slave_disable_pci_master();
-
- *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
- *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
-
- ixp2000_pci_preinit();
-
- if (ixdp2x00_master_npu()) {
- /*
- * Wait until the slave set its SRAM/SDRAM BAR sizes
- * correctly before we proceed to scan and enumerate
- * the bus.
- */
- ixdp2800_master_wait_for_slave();
-
- /*
- * We configure the SDRAM BARs by hand because they
- * are 1G and fall outside of the regular allocated
- * PCI address space.
- */
- *IXP2000_PCI_SDRAM_BAR = 0x00000008;
- } else {
- /*
- * Wait for the master to complete scanning the bus
- * and assigning resources before we proceed to scan
- * the bus ourselves. Set pci=firmware to honor the
- * master's resource assignment.
- */
- ixdp2800_slave_wait_for_master_enable();
- pcibios_setup("firmware");
- }
-}
-
-/*
- * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
- * of the regular PCI window, because there's only 512M of outbound PCI
- * memory window on each IXP, while we need 1G for each of the BARs.
- */
-static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
-{
- if (machine_is_ixdp2800()) {
- dev->resource[2].start = 0;
- dev->resource[2].end = 0;
- dev->resource[2].flags = 0;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
-
-static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
-{
- sys->mem_offset = 0x00000000;
-
- ixp2000_pci_setup(nr, sys);
-
- return 1;
-}
-
-static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- if (ixdp2x00_master_npu()) {
-
- /*
- * Root bus devices. Slave NPU is only one with interrupt.
- * Everything else, we just return -1 which is invalid.
- */
- if(!dev->bus->self) {
- if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
- return IRQ_IXDP2800_INGRESS_NPU;
-
- return -1;
- }
-
- /*
- * Bridge behind the PMC slot.
- */
- if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
- dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
- !dev->bus->parent->self->bus->parent)
- return IRQ_IXDP2800_PMC;
-
- /*
- * Device behind the first bridge
- */
- if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
- switch(dev->devfn) {
- case IXDP2X00_PMC_DEVFN:
- return IRQ_IXDP2800_PMC;
-
- case IXDP2800_MASTER_ENET_DEVFN:
- return IRQ_IXDP2800_EGRESS_ENET;
-
- case IXDP2800_SWITCH_FABRIC_DEVFN:
- return IRQ_IXDP2800_FABRIC;
- }
- }
-
- return -1;
- } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-static void __init ixdp2800_master_enable_slave(void)
-{
- volatile u32 *addr;
-
- printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
-
- addr = (volatile u32 *)ixp2000_pci_config_addr(0,
- IXDP2X00_SLAVE_NPU_DEVFN,
- PCI_COMMAND);
-
- *addr |= PCI_COMMAND_MASTER;
-}
-
-static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
-{
- volatile u32 *addr;
-
- printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
-
- addr = (volatile u32 *)ixp2000_pci_config_addr(0,
- IXDP2X00_SLAVE_NPU_DEVFN,
- PCI_COMMAND);
- while ((*addr & PCI_COMMAND_MEMORY) == 0)
- cpu_relax();
-}
-
-static void __init ixdp2800_slave_signal_bus_scan_completion(void)
-{
- printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
- *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
-}
-
-static void __init ixdp2800_pci_postinit(void)
-{
- if (!ixdp2x00_master_npu()) {
- ixdp2x00_slave_pci_postinit();
- ixdp2800_slave_signal_bus_scan_completion();
- }
-}
-
-struct __initdata hw_pci ixdp2800_pci __initdata = {
- .nr_controllers = 1,
- .setup = ixdp2800_pci_setup,
- .preinit = ixdp2800_pci_preinit,
- .postinit = ixdp2800_pci_postinit,
- .scan = ixp2000_pci_scan_bus,
- .map_irq = ixdp2800_pci_map_irq,
-};
-
-int __init ixdp2800_pci_init(void)
-{
- if (machine_is_ixdp2800()) {
- struct pci_dev *dev;
-
- pci_common_init(&ixdp2800_pci);
- if (ixdp2x00_master_npu()) {
- dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
-
- ixdp2800_master_enable_slave();
- ixdp2800_master_wait_for_slave_bus_scan();
- } else {
- dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
- }
- }
-
- return 0;
-}
-
-subsys_initcall(ixdp2800_pci_init);
-
-void __init ixdp2800_init_irq(void)
-{
- ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
-}
-
-MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .atag_offset = 0x100,
- .map_io = ixdp2x00_map_io,
- .init_irq = ixdp2800_init_irq,
- .timer = &ixdp2800_timer,
- .init_machine = ixdp2x00_init_machine,
- .restart = ixp2000_restart,
-MACHINE_END
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/ixdp2x00.c
- *
- * Code common to IXDP2400 and IXDP2800 platforms.
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-#include <mach/gpio-ixp2000.h>
-
-/*************************************************************************
- * IXDP2x00 IRQ Initialization
- *************************************************************************/
-static volatile unsigned long *board_irq_mask;
-static volatile unsigned long *board_irq_stat;
-static unsigned long board_irq_count;
-
-#ifdef CONFIG_ARCH_IXDP2400
-/*
- * Slowport configuration for accessing CPLD registers on IXDP2x00
- */
-static struct slowport_cfg slowport_cpld_cfg = {
- .CCR = SLOWPORT_CCR_DIV_2,
- .WTC = 0x00000070,
- .RTC = 0x00000070,
- .PCR = SLOWPORT_MODE_FLASH,
- .ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8
-};
-#endif
-
-static void ixdp2x00_irq_mask(struct irq_data *d)
-{
- unsigned long dummy;
- static struct slowport_cfg old_cfg;
-
- /*
- * This is ugly in common code but really don't know
- * of a better way to handle it. :(
- */
-#ifdef CONFIG_ARCH_IXDP2400
- if (machine_is_ixdp2400())
- ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
- dummy = *board_irq_mask;
- dummy |= IXP2000_BOARD_IRQ_MASK(d->irq);
- ixp2000_reg_wrb(board_irq_mask, dummy);
-
-#ifdef CONFIG_ARCH_IXDP2400
- if (machine_is_ixdp2400())
- ixp2000_release_slowport(&old_cfg);
-#endif
-}
-
-static void ixdp2x00_irq_unmask(struct irq_data *d)
-{
- unsigned long dummy;
- static struct slowport_cfg old_cfg;
-
-#ifdef CONFIG_ARCH_IXDP2400
- if (machine_is_ixdp2400())
- ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
-
- dummy = *board_irq_mask;
- dummy &= ~IXP2000_BOARD_IRQ_MASK(d->irq);
- ixp2000_reg_wrb(board_irq_mask, dummy);
-
- if (machine_is_ixdp2400())
- ixp2000_release_slowport(&old_cfg);
-}
-
-static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- volatile u32 ex_interrupt = 0;
- static struct slowport_cfg old_cfg;
- int i;
-
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
-#ifdef CONFIG_ARCH_IXDP2400
- if (machine_is_ixdp2400())
- ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
-#endif
- ex_interrupt = *board_irq_stat & 0xff;
- if (machine_is_ixdp2400())
- ixp2000_release_slowport(&old_cfg);
-
- if(!ex_interrupt) {
- printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n");
- return;
- }
-
- for(i = 0; i < board_irq_count; i++) {
- if(ex_interrupt & (1 << i)) {
- int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- generic_handle_irq(cpld_irq);
- }
- }
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x00_cpld_irq_chip = {
- .irq_ack = ixdp2x00_irq_mask,
- .irq_mask = ixdp2x00_irq_mask,
- .irq_unmask = ixdp2x00_irq_unmask
-};
-
-void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
-{
- unsigned int irq;
-
- ixp2000_init_irq();
-
- if (!ixdp2x00_master_npu())
- return;
-
- board_irq_stat = stat_reg;
- board_irq_mask = mask_reg;
- board_irq_count = nr_of_irqs;
-
- *board_irq_mask = 0xffffffff;
-
- for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
- irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- /* Hook into PCI interrupt */
- irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
-}
-
-/*************************************************************************
- * IXDP2x00 memory map
- *************************************************************************/
-static struct map_desc ixdp2x00_io_desc __initdata = {
- .virtual = IXDP2X00_VIRT_CPLD_BASE,
- .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
- .length = IXDP2X00_CPLD_SIZE,
- .type = MT_DEVICE
-};
-
-void __init ixdp2x00_map_io(void)
-{
- ixp2000_map_io();
-
- iotable_init(&ixdp2x00_io_desc, 1);
-}
-
-/*************************************************************************
- * IXDP2x00-common PCI init
- *
- * The IXDP2[48]00 has a horrid PCI bus layout. Basically the board
- * contains two NPUs (ingress and egress) connected over PCI, both running
- * instances of the kernel. So far so good. Peers on the PCI bus running
- * Linux is a common design in telecom systems. The problem is that instead
- * of all the devices being controlled by a single host, different
- * devices are controlled by different NPUs on the same bus, leading to
- * multiple hosts on the bus. The exact bus layout looks like:
- *
- * Bus 0
- * Master NPU <-------------------+-------------------> Slave NPU
- * |
- * |
- * P2P
- * |
- *
- * Bus 1 |
- * <--+------+---------+---------+------+-->
- * | | | | |
- * | | | | |
- * ... Dev PMC Media Eth0 Eth1 ...
- *
- * The master controls all but Eth1, which is controlled by the
- * slave. What this means is that the both the master and the slave
- * have to scan the bus, but only one of them can enumerate the bus.
- * In addition, after the bus is scanned, each kernel must remove
- * the device(s) it does not control from the PCI dev list otherwise
- * a driver on each NPU will try to manage it and we will have horrible
- * conflicts. Oh..and the slave NPU needs to see the master NPU
- * for Intel's drivers to work properly. Closed source drivers...
- *
- * The way we deal with this is fairly simple but ugly:
- *
- * 1) Let master scan and enumerate the bus completely.
- * 2) Master deletes Eth1 from device list.
- * 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave)
- * from device list.
- * 4) Find HW designers and LART them.
- *
- * The boards also do not do normal PCI IRQ routing, or any sort of
- * sensical swizzling, so we just need to check where on the bus a
- * device sits and figure out to which CPLD pin the interrupt is routed.
- * See ixdp2[48]00.c files.
- *
- *************************************************************************/
-void ixdp2x00_slave_pci_postinit(void)
-{
- struct pci_dev *dev;
-
- /*
- * Remove PMC device is there is one
- */
- if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
- }
-
- dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
-}
-
-/**************************************************************************
- * IXDP2x00 Machine Setup
- *************************************************************************/
-static struct flash_platform_data ixdp2x00_platform_data = {
- .map_name = "cfi_probe",
- .width = 1,
-};
-
-static struct ixp2000_flash_data ixdp2x00_flash_data = {
- .platform_data = &ixdp2x00_platform_data,
- .nr_banks = 1
-};
-
-static struct resource ixdp2x00_flash_resource = {
- .start = 0xc4000000,
- .end = 0xc4000000 + 0x00ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x00_flash = {
- .name = "IXP2000-Flash",
- .id = 0,
- .dev = {
- .platform_data = &ixdp2x00_flash_data,
- },
- .num_resources = 1,
- .resource = &ixdp2x00_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = {
- .sda_pin = IXDP2X00_GPIO_SDA,
- .scl_pin = IXDP2X00_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x00_i2c_controller = {
- .name = "IXP2000-I2C",
- .id = 0,
- .dev = {
- .platform_data = &ixdp2x00_i2c_gpio_pins,
- },
- .num_resources = 0
-};
-
-static struct platform_device *ixdp2x00_devices[] __initdata = {
- &ixdp2x00_flash,
- &ixdp2x00_i2c_controller
-};
-
-void __init ixdp2x00_init_machine(void)
-{
- gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1);
- gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
-
- platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
- ixp2000_uart_init();
-}
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/ixdp2x01.c
- *
- * Code common to Intel IXDP2401 and IXDP2801 platforms
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * IXDP2x01 IRQ Handling
- *************************************************************************/
-static void ixdp2x01_irq_mask(struct irq_data *d)
-{
- ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
- IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static void ixdp2x01_irq_unmask(struct irq_data *d)
-{
- ixp2000_reg_write(IXDP2X01_INT_MASK_CLR_REG,
- IXP2000_BOARD_IRQ_MASK(d->irq));
-}
-
-static u32 valid_irq_mask;
-
-static void ixdp2x01_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- u32 ex_interrupt;
- int i;
-
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- ex_interrupt = *IXDP2X01_INT_STAT_REG & valid_irq_mask;
-
- if (!ex_interrupt) {
- printk(KERN_ERR "Spurious IXDP2X01 CPLD interrupt!\n");
- return;
- }
-
- for (i = 0; i < IXP2000_BOARD_IRQS; i++) {
- if (ex_interrupt & (1 << i)) {
- int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
- generic_handle_irq(cpld_irq);
- }
- }
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2x01_irq_chip = {
- .irq_mask = ixdp2x01_irq_mask,
- .irq_ack = ixdp2x01_irq_mask,
- .irq_unmask = ixdp2x01_irq_unmask
-};
-
-/*
- * We only do anything if we are the master NPU on the board.
- * The slave NPU only has the ethernet chip going directly to
- * the PCIB interrupt input.
- */
-void __init ixdp2x01_init_irq(void)
-{
- int irq = 0;
-
- /* initialize chip specific interrupts */
- ixp2000_init_irq();
-
- if (machine_is_ixdp2401())
- valid_irq_mask = IXDP2401_VALID_IRQ_MASK;
- else
- valid_irq_mask = IXDP2801_VALID_IRQ_MASK;
-
- /* Mask all interrupts from CPLD, disable simulation */
- ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
- ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
-
- for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
- if (irq & valid_irq_mask) {
- irq_set_chip_and_handler(irq, &ixdp2x01_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- } else {
- set_irq_flags(irq, 0);
- }
- }
-
- /* Hook into PCI interrupts */
- irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x01_irq_handler);
-}
-
-
-/*************************************************************************
- * IXDP2x01 memory map
- *************************************************************************/
-static struct map_desc ixdp2x01_io_desc __initdata = {
- .virtual = IXDP2X01_VIRT_CPLD_BASE,
- .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
- .length = IXDP2X01_CPLD_REGION_SIZE,
- .type = MT_DEVICE
-};
-
-static void __init ixdp2x01_map_io(void)
-{
- ixp2000_map_io();
- iotable_init(&ixdp2x01_io_desc, 1);
-}
-
-
-/*************************************************************************
- * IXDP2x01 serial ports
- *************************************************************************/
-static struct plat_serial8250_port ixdp2x01_serial_port1[] = {
- {
- .mapbase = (unsigned long)IXDP2X01_UART1_PHYS_BASE,
- .membase = (char *)IXDP2X01_UART1_VIRT_BASE,
- .irq = IRQ_IXDP2X01_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = IXDP2X01_UART_CLK,
- },
- { }
-};
-
-static struct resource ixdp2x01_uart_resource1 = {
- .start = IXDP2X01_UART1_PHYS_BASE,
- .end = IXDP2X01_UART1_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device1 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
- .dev = {
- .platform_data = ixdp2x01_serial_port1,
- },
- .num_resources = 1,
- .resource = &ixdp2x01_uart_resource1,
-};
-
-static struct plat_serial8250_port ixdp2x01_serial_port2[] = {
- {
- .mapbase = (unsigned long)IXDP2X01_UART2_PHYS_BASE,
- .membase = (char *)IXDP2X01_UART2_VIRT_BASE,
- .irq = IRQ_IXDP2X01_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM32,
- .regshift = 2,
- .uartclk = IXDP2X01_UART_CLK,
- },
- { }
-};
-
-static struct resource ixdp2x01_uart_resource2 = {
- .start = IXDP2X01_UART2_PHYS_BASE,
- .end = IXDP2X01_UART2_PHYS_BASE + 0xffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_serial_device2 = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
- .dev = {
- .platform_data = ixdp2x01_serial_port2,
- },
- .num_resources = 1,
- .resource = &ixdp2x01_uart_resource2,
-};
-
-static void ixdp2x01_uart_init(void)
-{
- platform_device_register(&ixdp2x01_serial_device1);
- platform_device_register(&ixdp2x01_serial_device2);
-}
-
-
-/*************************************************************************
- * IXDP2x01 timer tick configuration
- *************************************************************************/
-static unsigned int ixdp2x01_clock;
-
-static int __init ixdp2x01_clock_setup(char *str)
-{
- ixdp2x01_clock = simple_strtoul(str, NULL, 10);
-
- return 1;
-}
-
-__setup("ixdp2x01_clock=", ixdp2x01_clock_setup);
-
-static void __init ixdp2x01_timer_init(void)
-{
- if (!ixdp2x01_clock)
- ixdp2x01_clock = 50000000;
-
- ixp2000_init_time(ixdp2x01_clock);
-}
-
-static struct sys_timer ixdp2x01_timer = {
- .init = ixdp2x01_timer_init,
- .offset = ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2x01 PCI
- *************************************************************************/
-void __init ixdp2x01_pci_preinit(void)
-{
- ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
- ixp2000_pci_preinit();
- pcibios_setup("firmware");
-}
-
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot,
- u8 pin)
-{
- u8 bus = dev->bus->number;
- u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
- struct pci_bus *tmp_bus = dev->bus;
-
- /* Primary bus, no interrupts here */
- if (bus == 0) {
- return -1;
- }
-
- /* Lookup first leaf in bus tree */
- while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) {
- tmp_bus = tmp_bus->parent;
- }
-
- /* Select between known bridges */
- switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
- /* Device is located after first MB bridge */
- case 0x0008:
- if (tmp_bus == dev->bus) {
- /* Device is located directly after first MB bridge */
- switch (devpin) {
- case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
- if (machine_is_ixdp2401())
- return IRQ_IXDP2401_INTA_82546;
- return -1;
- case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
- if (machine_is_ixdp2401())
- return IRQ_IXDP2401_INTB_82546;
- return -1;
- case DEVPIN(0, 1): /* PMC INTA# */
- return IRQ_IXDP2X01_SPCI_PMC_INTA;
- case DEVPIN(0, 2): /* PMC INTB# */
- return IRQ_IXDP2X01_SPCI_PMC_INTB;
- case DEVPIN(0, 3): /* PMC INTC# */
- return IRQ_IXDP2X01_SPCI_PMC_INTC;
- case DEVPIN(0, 4): /* PMC INTD# */
- return IRQ_IXDP2X01_SPCI_PMC_INTD;
- }
- }
- break;
- case 0x0010:
- if (tmp_bus == dev->bus) {
- /* Device is located directly after second MB bridge */
- /* Secondary bus of second bridge */
- switch (devpin) {
- case DEVPIN(0, 1): /* DB#0 */
- return IRQ_IXDP2X01_SPCI_DB_0;
- case DEVPIN(1, 1): /* DB#1 */
- return IRQ_IXDP2X01_SPCI_DB_1;
- }
- } else {
- /* Device is located indirectly after second MB bridge */
- /* Not supported now */
- }
- break;
- }
-
- return -1;
-}
-
-
-static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
-{
- sys->mem_offset = 0xe0000000;
-
- if (machine_is_ixdp2801() || machine_is_ixdp28x5())
- sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
-
- return ixp2000_pci_setup(nr, sys);
-}
-
-struct hw_pci ixdp2x01_pci __initdata = {
- .nr_controllers = 1,
- .setup = ixdp2x01_pci_setup,
- .preinit = ixdp2x01_pci_preinit,
- .scan = ixp2000_pci_scan_bus,
- .map_irq = ixdp2x01_pci_map_irq,
-};
-
-int __init ixdp2x01_pci_init(void)
-{
- if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
- machine_is_ixdp28x5())
- pci_common_init(&ixdp2x01_pci);
-
- return 0;
-}
-
-subsys_initcall(ixdp2x01_pci_init);
-
-/*************************************************************************
- * IXDP2x01 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data ixdp2x01_flash_platform_data = {
- .map_name = "cfi_probe",
- .width = 1,
-};
-
-static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
-{
- ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
- ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
- return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
-}
-
-static struct ixp2000_flash_data ixdp2x01_flash_data = {
- .platform_data = &ixdp2x01_flash_platform_data,
- .bank_setup = ixdp2x01_flash_bank_setup
-};
-
-static struct resource ixdp2x01_flash_resource = {
- .start = 0xc4000000,
- .end = 0xc4000000 + 0x01ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2x01_flash = {
- .name = "IXP2000-Flash",
- .id = 0,
- .dev = {
- .platform_data = &ixdp2x01_flash_data,
- },
- .num_resources = 1,
- .resource = &ixdp2x01_flash_resource,
-};
-
-static struct ixp2000_i2c_pins ixdp2x01_i2c_gpio_pins = {
- .sda_pin = IXDP2X01_GPIO_SDA,
- .scl_pin = IXDP2X01_GPIO_SCL,
-};
-
-static struct platform_device ixdp2x01_i2c_controller = {
- .name = "IXP2000-I2C",
- .id = 0,
- .dev = {
- .platform_data = &ixdp2x01_i2c_gpio_pins,
- },
- .num_resources = 0
-};
-
-static struct platform_device *ixdp2x01_devices[] __initdata = {
- &ixdp2x01_flash,
- &ixdp2x01_i2c_controller
-};
-
-static void __init ixdp2x01_init_machine(void)
-{
- ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
- (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
-
- ixdp2x01_flash_data.nr_banks =
- ((*IXDP2X01_CPLD_FLASH_REG & IXDP2X01_CPLD_FLASH_BANK_MASK) + 1);
-
- platform_add_devices(ixdp2x01_devices, ARRAY_SIZE(ixdp2x01_devices));
- ixp2000_uart_init();
- ixdp2x01_uart_init();
-}
-
-static void ixdp2401_restart(char mode, const char *cmd)
-{
- /*
- * Reset flash banking register so that we are pointing at
- * RedBoot bank.
- */
- ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
- ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
- | IXDP2X01_CPLD_FLASH_INTERN));
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
-
- ixp2000_restart(mode, cmd);
-}
-
-static void ixdp280x_restart(char mode, const char *cmd)
-{
- /*
- * On IXDP2801 we need to write this magic sequence to the CPLD
- * to cause a complete reset of the CPU and all external devices
- * and move the flash bank register back to 0.
- */
- unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
-
- reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
- ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
- ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
-
- ixp2000_restart(mode, cmd);
-}
-
-#ifdef CONFIG_ARCH_IXDP2401
-MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .atag_offset = 0x100,
- .map_io = ixdp2x01_map_io,
- .init_irq = ixdp2x01_init_irq,
- .timer = &ixdp2x01_timer,
- .init_machine = ixdp2x01_init_machine,
- .restart = ixdp2401_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_ARCH_IXDP2801
-MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .atag_offset = 0x100,
- .map_io = ixdp2x01_map_io,
- .init_irq = ixdp2x01_init_irq,
- .timer = &ixdp2x01_timer,
- .init_machine = ixdp2x01_init_machine,
- .restart = ixdp280x_restart,
-MACHINE_END
-
-/*
- * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
- * changed the machine ID in the bootloader
- */
-MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .atag_offset = 0x100,
- .map_io = ixdp2x01_map_io,
- .init_irq = ixdp2x01_init_irq,
- .timer = &ixdp2x01_timer,
- .init_machine = ixdp2x01_init_machine,
- .restart = ixdp280x_restart,
-MACHINE_END
-#endif
-
-
+++ /dev/null
-/*
- * arch/arm/mach-ixp2000/pci.c
- *
- * PCI routines for IXDP2400/IXDP2800 boards
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintained by: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-static volatile int pci_master_aborts = 0;
-
-static int clear_master_aborts(void);
-
-u32 *
-ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
- u32 *paddress;
-
- if (PCI_SLOT(devfn) > 7)
- return 0;
-
- /* Must be dword aligned */
- where &= ~3;
-
- /*
- * For top bus, generate type 0, else type 1
- */
- if (!bus_nr) {
- /* only bits[23:16] are used for IDSEL */
- paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
- | (1 << (PCI_SLOT(devfn) + 16))
- | (PCI_FUNC(devfn) << 8) | where);
- } else {
- paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE
- | (bus_nr << 16)
- | (PCI_SLOT(devfn) << 11)
- | (PCI_FUNC(devfn) << 8) | where);
- }
-
- return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
- /*0*/ 0,
- /*1*/ 0xff,
- /*2*/ 0xffff,
- /*3*/ 0,
- /*4*/ 0xffffffff,
-};
-
-
-int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *value)
-{
- u32 n;
- u32 *addr;
-
- n = where % 4;
-
- addr = ixp2000_pci_config_addr(bus->number, devfn, where);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- pci_master_aborts = 0;
- *value = (*addr >> (8*n)) & bytemask[size];
- if (pci_master_aborts) {
- pci_master_aborts = 0;
- *value = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checks by calling clear_master_aborts() b/c the
- * assumption is that the caller did a read first to make sure a device
- * exists.
- */
-int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 value)
-{
- u32 mask;
- u32 *addr;
- u32 temp;
-
- mask = ~(bytemask[size] << ((where % 0x4) * 8));
- addr = ixp2000_pci_config_addr(bus->number, devfn, where);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- temp = (u32) (value) << ((where % 0x4) * 8);
- *addr = (*addr & mask) | temp;
-
- clear_master_aborts();
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static struct pci_ops ixp2000_pci_ops = {
- .read = ixp2000_pci_read_config,
- .write = ixp2000_pci_write_config
-};
-
-struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
- return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
- sysdata, &sysdata->resources);
-}
-
-
-int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-
- volatile u32 temp;
- unsigned long flags;
-
- pci_master_aborts = 1;
-
- local_irq_save(flags);
- temp = *(IXP2000_PCI_CONTROL);
- if (temp & ((1 << 8) | (1 << 5))) {
- ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
- }
-
- temp = *(IXP2000_PCI_CMDSTAT);
- if (temp & (1 << 29)) {
- while (temp & (1 << 29)) {
- ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
- temp = *(IXP2000_PCI_CMDSTAT);
- }
- }
- local_irq_restore(flags);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-int
-clear_master_aborts(void)
-{
- volatile u32 temp;
- unsigned long flags;
-
- local_irq_save(flags);
- temp = *(IXP2000_PCI_CONTROL);
- if (temp & ((1 << 8) | (1 << 5))) {
- ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
- }
-
- temp = *(IXP2000_PCI_CMDSTAT);
- if (temp & (1 << 29)) {
- while (temp & (1 << 29)) {
- ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
- temp = *(IXP2000_PCI_CMDSTAT);
- }
- }
- local_irq_restore(flags);
-
- return 0;
-}
-
-void __init
-ixp2000_pci_preinit(void)
-{
- pci_set_flags(0);
-
- pcibios_min_io = 0;
- pcibios_min_mem = 0;
-
-#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
- /*
- * Configure the PCI unit to properly byteswap I/O transactions,
- * and verify that it worked.
- */
- ixp2000_reg_write(IXP2000_PCI_CONTROL,
- (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
-
- if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
- panic("IXP2000: PCI I/O is broken on this ixp model, and "
- "the needed workaround has not been configured in");
-#endif
-
- hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
- "PCI config cycle to non-existent device");
-}
-
-
-/*
- * IXP2000 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp2000_pci_mem_space = {
- .start = 0xe0000000,
- .end = 0xffffffff,
- .flags = IORESOURCE_MEM,
- .name = "PCI Mem Space"
-};
-
-static struct resource ixp2000_pci_io_space = {
- .start = 0x00010000,
- .end = 0x0001ffff,
- .flags = IORESOURCE_IO,
- .name = "PCI I/O Space"
-};
-
-int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
-{
- if (nr >= 1)
- return 0;
-
- pci_add_resource_offset(&sys->resources,
- &ixp2000_pci_io_space, sys->io_offset);
- pci_add_resource_offset(&sys->resources,
- &ixp2000_pci_mem_space, sys->mem_offset);
-
- return 1;
-}
-
+++ /dev/null
-if ARCH_IXP23XX
-
-config ARCH_SUPPORTS_BIG_ENDIAN
- bool
- default y
-
-menu "Intel IXP23xx Implementation Options"
-
-comment "IXP23xx Platforms"
-
-config MACH_ESPRESSO
- bool "Support IP Fabrics Double Espresso platform"
- help
-
-config MACH_IXDP2351
- bool "Support Intel IXDP2351 platform"
- help
-
-config MACH_ROADRUNNER
- bool "Support ADI RoadRunner platform"
- help
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-obj-y := core.o pci.o
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_MACH_ESPRESSO) += espresso.o
-obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o
-obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o
+++ /dev/null
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000100
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/core.c
- *
- * Core routines for IXP23xx chips
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-
-
-/*************************************************************************
- * Chip specific mappings shared by all IXP23xx systems
- *************************************************************************/
-static struct map_desc ixp23xx_io_desc[] __initdata = {
- { /* XSI-CPP CSRs */
- .virtual = IXP23XX_XSI2CPP_CSR_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_XSI2CPP_CSR_PHYS),
- .length = IXP23XX_XSI2CPP_CSR_SIZE,
- .type = MT_DEVICE,
- }, { /* Expansion Bus Config */
- .virtual = IXP23XX_EXP_CFG_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_EXP_CFG_PHYS),
- .length = IXP23XX_EXP_CFG_SIZE,
- .type = MT_DEVICE,
- }, { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACS,.... */
- .virtual = IXP23XX_PERIPHERAL_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_PERIPHERAL_PHYS),
- .length = IXP23XX_PERIPHERAL_SIZE,
- .type = MT_DEVICE,
- }, { /* CAP CSRs */
- .virtual = IXP23XX_CAP_CSR_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_CAP_CSR_PHYS),
- .length = IXP23XX_CAP_CSR_SIZE,
- .type = MT_DEVICE,
- }, { /* MSF CSRs */
- .virtual = IXP23XX_MSF_CSR_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_MSF_CSR_PHYS),
- .length = IXP23XX_MSF_CSR_SIZE,
- .type = MT_DEVICE,
- }, { /* PCI I/O Space */
- .virtual = IXP23XX_PCI_IO_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_PCI_IO_PHYS),
- .length = IXP23XX_PCI_IO_SIZE,
- .type = MT_DEVICE,
- }, { /* PCI Config Space */
- .virtual = IXP23XX_PCI_CFG_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_PCI_CFG_PHYS),
- .length = IXP23XX_PCI_CFG_SIZE,
- .type = MT_DEVICE,
- }, { /* PCI local CFG CSRs */
- .virtual = IXP23XX_PCI_CREG_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_PCI_CREG_PHYS),
- .length = IXP23XX_PCI_CREG_SIZE,
- .type = MT_DEVICE,
- }, { /* PCI MEM Space */
- .virtual = IXP23XX_PCI_MEM_VIRT,
- .pfn = __phys_to_pfn(IXP23XX_PCI_MEM_PHYS),
- .length = IXP23XX_PCI_MEM_SIZE,
- .type = MT_DEVICE,
- }
-};
-
-void __init ixp23xx_map_io(void)
-{
- iotable_init(ixp23xx_io_desc, ARRAY_SIZE(ixp23xx_io_desc));
-}
-
-
-/***************************************************************************
- * IXP23xx Interrupt Handling
- ***************************************************************************/
-enum ixp23xx_irq_type {
- IXP23XX_IRQ_LEVEL, IXP23XX_IRQ_EDGE
-};
-
-static void ixp23xx_config_irq(unsigned int, enum ixp23xx_irq_type);
-
-static int ixp23xx_irq_set_type(struct irq_data *d, unsigned int type)
-{
- int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
- u32 int_style;
- enum ixp23xx_irq_type irq_type;
- volatile u32 *int_reg;
-
- /*
- * Only GPIOs 6-15 are wired to interrupts on IXP23xx
- */
- if (line < 6 || line > 15)
- return -EINVAL;
-
- switch (type) {
- case IRQ_TYPE_EDGE_BOTH:
- int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
- irq_type = IXP23XX_IRQ_EDGE;
- break;
- case IRQ_TYPE_EDGE_RISING:
- int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
- irq_type = IXP23XX_IRQ_EDGE;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
- irq_type = IXP23XX_IRQ_EDGE;
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
- irq_type = IXP23XX_IRQ_LEVEL;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
- irq_type = IXP23XX_IRQ_LEVEL;
- break;
- default:
- return -EINVAL;
- }
-
- ixp23xx_config_irq(d->irq, irq_type);
-
- if (line >= 8) { /* pins 8-15 */
- line -= 8;
- int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT2R;
- } else { /* pins 0-7 */
- int_reg = (volatile u32 *)IXP23XX_GPIO_GPIT1R;
- }
-
- /*
- * Clear pending interrupts
- */
- *IXP23XX_GPIO_GPISR = (1 << line);
-
- /* Clear the style for the appropriate pin */
- *int_reg &= ~(IXP23XX_GPIO_STYLE_MASK <<
- (line * IXP23XX_GPIO_STYLE_SIZE));
-
- /* Set the new style */
- *int_reg |= (int_style << (line * IXP23XX_GPIO_STYLE_SIZE));
-
- return 0;
-}
-
-static void ixp23xx_irq_mask(struct irq_data *d)
-{
- volatile unsigned long *intr_reg;
- unsigned int irq = d->irq;
-
- if (irq >= 56)
- irq += 8;
-
- intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
- *intr_reg &= ~(1 << (irq % 32));
-}
-
-static void ixp23xx_irq_ack(struct irq_data *d)
-{
- int line = d->irq - IRQ_IXP23XX_GPIO6 + 6;
-
- if ((line < 6) || (line > 15))
- return;
-
- *IXP23XX_GPIO_GPISR = (1 << line);
-}
-
-/*
- * Level triggered interrupts on GPIO lines can only be cleared when the
- * interrupt condition disappears.
- */
-static void ixp23xx_irq_level_unmask(struct irq_data *d)
-{
- volatile unsigned long *intr_reg;
- unsigned int irq = d->irq;
-
- ixp23xx_irq_ack(d);
-
- if (irq >= 56)
- irq += 8;
-
- intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
- *intr_reg |= (1 << (irq % 32));
-}
-
-static void ixp23xx_irq_edge_unmask(struct irq_data *d)
-{
- volatile unsigned long *intr_reg;
- unsigned int irq = d->irq;
-
- if (irq >= 56)
- irq += 8;
-
- intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
- *intr_reg |= (1 << (irq % 32));
-}
-
-static struct irq_chip ixp23xx_irq_level_chip = {
- .irq_ack = ixp23xx_irq_mask,
- .irq_mask = ixp23xx_irq_mask,
- .irq_unmask = ixp23xx_irq_level_unmask,
- .irq_set_type = ixp23xx_irq_set_type
-};
-
-static struct irq_chip ixp23xx_irq_edge_chip = {
- .irq_ack = ixp23xx_irq_ack,
- .irq_mask = ixp23xx_irq_mask,
- .irq_unmask = ixp23xx_irq_edge_unmask,
- .irq_set_type = ixp23xx_irq_set_type
-};
-
-static void ixp23xx_pci_irq_mask(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- *IXP23XX_PCI_XSCALE_INT_ENABLE &= ~(1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-static void ixp23xx_pci_irq_unmask(struct irq_data *d)
-{
- unsigned int irq = d->irq;
-
- *IXP23XX_PCI_XSCALE_INT_ENABLE |= (1 << (IRQ_IXP23XX_INTA + 27 - irq));
-}
-
-/*
- * TODO: Should this just be done at ASM level?
- */
-static void pci_handler(unsigned int irq, struct irq_desc *desc)
-{
- u32 pci_interrupt;
- unsigned int irqno;
-
- pci_interrupt = *IXP23XX_PCI_XSCALE_INT_STATUS;
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- /* See which PCI_INTA, or PCI_INTB interrupted */
- if (pci_interrupt & (1 << 26)) {
- irqno = IRQ_IXP23XX_INTB;
- } else if (pci_interrupt & (1 << 27)) {
- irqno = IRQ_IXP23XX_INTA;
- } else {
- BUG();
- }
-
- generic_handle_irq(irqno);
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixp23xx_pci_irq_chip = {
- .irq_ack = ixp23xx_pci_irq_mask,
- .irq_mask = ixp23xx_pci_irq_mask,
- .irq_unmask = ixp23xx_pci_irq_unmask
-};
-
-static void ixp23xx_config_irq(unsigned int irq, enum ixp23xx_irq_type type)
-{
- switch (type) {
- case IXP23XX_IRQ_LEVEL:
- irq_set_chip_and_handler(irq, &ixp23xx_irq_level_chip,
- handle_level_irq);
- break;
- case IXP23XX_IRQ_EDGE:
- irq_set_chip_and_handler(irq, &ixp23xx_irq_edge_chip,
- handle_edge_irq);
- break;
- }
- set_irq_flags(irq, IRQF_VALID);
-}
-
-void __init ixp23xx_init_irq(void)
-{
- int irq;
-
- /* Route everything to IRQ */
- *IXP23XX_INTR_SEL1 = 0x0;
- *IXP23XX_INTR_SEL2 = 0x0;
- *IXP23XX_INTR_SEL3 = 0x0;
- *IXP23XX_INTR_SEL4 = 0x0;
-
- /* Mask all sources */
- *IXP23XX_INTR_EN1 = 0x0;
- *IXP23XX_INTR_EN2 = 0x0;
- *IXP23XX_INTR_EN3 = 0x0;
- *IXP23XX_INTR_EN4 = 0x0;
-
- /*
- * Configure all IRQs for level-sensitive operation
- */
- for (irq = 0; irq <= NUM_IXP23XX_RAW_IRQS; irq++) {
- ixp23xx_config_irq(irq, IXP23XX_IRQ_LEVEL);
- }
-
- for (irq = IRQ_IXP23XX_INTA; irq <= IRQ_IXP23XX_INTB; irq++) {
- irq_set_chip_and_handler(irq, &ixp23xx_pci_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- irq_set_chained_handler(IRQ_IXP23XX_PCI_INT_RPH, pci_handler);
-}
-
-
-/*************************************************************************
- * Timer-tick functions for IXP23xx
- *************************************************************************/
-#define CLOCK_TICKS_PER_USEC (CLOCK_TICK_RATE / USEC_PER_SEC)
-
-static unsigned long next_jiffy_time;
-
-static unsigned long
-ixp23xx_gettimeoffset(void)
-{
- unsigned long elapsed;
-
- elapsed = *IXP23XX_TIMER_CONT - (next_jiffy_time - LATCH);
-
- return elapsed / CLOCK_TICKS_PER_USEC;
-}
-
-static irqreturn_t
-ixp23xx_timer_interrupt(int irq, void *dev_id)
-{
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
- while ((signed long)(*IXP23XX_TIMER_CONT - next_jiffy_time) >= LATCH) {
- timer_tick();
- next_jiffy_time += LATCH;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction ixp23xx_timer_irq = {
- .name = "IXP23xx Timer Tick",
- .handler = ixp23xx_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-};
-
-void __init ixp23xx_init_timer(void)
-{
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP23XX_TIMER_STATUS = IXP23XX_TIMER1_INT_PEND;
-
- /* Setup the Timer counter value */
- *IXP23XX_TIMER1_RELOAD =
- (LATCH & ~IXP23XX_TIMER_RELOAD_MASK) | IXP23XX_TIMER_ENABLE;
-
- *IXP23XX_TIMER_CONT = 0;
- next_jiffy_time = LATCH;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP23XX_TIMER1, &ixp23xx_timer_irq);
-}
-
-struct sys_timer ixp23xx_timer = {
- .init = ixp23xx_init_timer,
- .offset = ixp23xx_gettimeoffset,
-};
-
-
-/*************************************************************************
- * IXP23xx Platform Initialization
- *************************************************************************/
-static struct resource ixp23xx_uart_resources[] = {
- {
- .start = IXP23XX_UART1_PHYS,
- .end = IXP23XX_UART1_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }, {
- .start = IXP23XX_UART2_PHYS,
- .end = IXP23XX_UART2_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
-};
-
-static struct plat_serial8250_port ixp23xx_uart_data[] = {
- {
- .mapbase = IXP23XX_UART1_PHYS,
- .membase = (char *)(IXP23XX_UART1_VIRT + 3),
- .irq = IRQ_IXP23XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP23XX_UART_XTAL,
- }, {
- .mapbase = IXP23XX_UART2_PHYS,
- .membase = (char *)(IXP23XX_UART2_VIRT + 3),
- .irq = IRQ_IXP23XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP23XX_UART_XTAL,
- },
- { },
-};
-
-static struct platform_device ixp23xx_uart = {
- .name = "serial8250",
- .id = 0,
- .dev.platform_data = ixp23xx_uart_data,
- .num_resources = 2,
- .resource = ixp23xx_uart_resources,
-};
-
-static struct platform_device *ixp23xx_devices[] __initdata = {
- &ixp23xx_uart,
-};
-
-void __init ixp23xx_sys_init(void)
-{
- /* by default, the idle code is disabled */
- disable_hlt();
-
- *IXP23XX_EXP_UNIT_FUSE |= 0xf;
- platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
-}
-
-void ixp23xx_restart(char mode, const char *cmd)
-{
- /* Use on-chip reset capability */
- *IXP23XX_RESET0 |= IXP23XX_RST_ALL;
-}
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/espresso.c
- *
- * Double Espresso-specific routines
- *
- * Author: Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-static int __init espresso_pci_init(void)
-{
- if (machine_is_espresso())
- ixp23xx_pci_slave_init();
-
- return 0;
-};
-subsys_initcall(espresso_pci_init);
-
-static struct physmap_flash_data espresso_flash_data = {
- .width = 2,
-};
-
-static struct resource espresso_flash_resource = {
- .start = 0x90000000,
- .end = 0x91ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device espresso_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &espresso_flash_data,
- },
- .num_resources = 1,
- .resource = &espresso_flash_resource,
-};
-
-static void __init espresso_init(void)
-{
- platform_device_register(&espresso_flash);
-
- /*
- * Mark flash as writeable.
- */
- IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
-
- ixp23xx_sys_init();
-}
-
-MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
- /* Maintainer: Lennert Buytenhek */
- .map_io = ixp23xx_map_io,
- .init_irq = ixp23xx_init_irq,
- .timer = &ixp23xx_timer,
- .atag_offset = 0x100,
- .init_machine = espresso_init,
- .restart = ixp23xx_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <mach/ixp23xx.h>
-
- .macro addruart, rp, rv, tmp
- ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
- ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
-#ifdef __ARMEB__
- orr \rp, \rp, #0x00000003
- orr \rv, \rv, #0x00000003
-#endif
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
- */
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
- ldr \irqnr, [\irqnr] @ get interrupt number
- cmp \irqnr, #0x0 @ spurious interrupt ?
- movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits
- subne \irqnr, \irqnr, #1 @ convert to 0 based
-
-#if 0
- cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH
- bne 1001f
- mov \irqnr, #IRQ_IXP23XX_INTA
-
- ldr \irqnr, =0xf5000030
-
- mov \tmp, #(1<<26)
- tst \irqnr, \tmp
- movne \irqnr, #IRQ_IXP23XX_INTB
-
- mov \tmp, #(1<<27)
- tst \irqnr, \tmp
- movne \irqnr, #IRQ_IXP23XX_INTA
-1001:
-#endif
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/hardware.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- * Copyricht (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Hardware definitions for IXP23XX based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* PCI IO info */
-
-#include "ixp23xx.h"
-
-/*
- * Platform helper functions
- */
-#include "platform.h"
-
-/*
- * Platform-specific headers
- */
-#include "ixdp2351.h"
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/io.h
- *
- * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2003-2005 Intel Corp.
- * Copyright (C) 2005 MontaVista Software, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/irqs.h
- *
- * IRQ definitions for IXP23XX based systems
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- *
- * Copyright (C) 2003-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define NR_IXP23XX_IRQS IRQ_IXP23XX_INTB+1
-#define IRQ_IXP23XX_EXTIRQS NR_IXP23XX_IRQS
-
-
-#define IRQ_IXP23XX_DBG0 0 /* Debug/Execution/MBox */
-#define IRQ_IXP23XX_DBG1 1 /* Debug/Execution/MBox */
-#define IRQ_IXP23XX_NPE_TRG 2 /* npe_trigger */
-#define IRQ_IXP23XX_TIMER1 3 /* Timer[0] */
-#define IRQ_IXP23XX_TIMER2 4 /* Timer[1] */
-#define IRQ_IXP23XX_TIMESTAMP 5 /* Timer[2], Time-stamp */
-#define IRQ_IXP23XX_WDOG 6 /* Time[3], Watchdog Timer */
-#define IRQ_IXP23XX_PCI_DBELL 7 /* PCI Doorbell */
-#define IRQ_IXP23XX_PCI_DMA1 8 /* PCI DMA Channel 1 */
-#define IRQ_IXP23XX_PCI_DMA2 9 /* PCI DMA Channel 2 */
-#define IRQ_IXP23XX_PCI_DMA3 10 /* PCI DMA Channel 3 */
-#define IRQ_IXP23XX_PCI_INT_RPH 11 /* pcxg_pci_int_rph */
-#define IRQ_IXP23XX_CPP_PMU 12 /* xpxg_pm_int_rpl */
-#define IRQ_IXP23XX_SWINT0 13 /* S/W Interrupt0 */
-#define IRQ_IXP23XX_SWINT1 14 /* S/W Interrupt1 */
-#define IRQ_IXP23XX_UART2 15 /* UART1 Interrupt */
-#define IRQ_IXP23XX_UART1 16 /* UART0 Interrupt */
-#define IRQ_IXP23XX_XSI_PMU_ROLLOVER 17 /* AHB Performance M. Unit counter rollover */
-#define IRQ_IXP23XX_XSI_AHB_PM0 18 /* intr_pm_o */
-#define IRQ_IXP23XX_XSI_AHB_ECE0 19 /* intr_ece_o */
-#define IRQ_IXP23XX_XSI_AHB_GASKET 20 /* gas_intr_o */
-#define IRQ_IXP23XX_XSI_CPP 21 /* xsi2cpp_int */
-#define IRQ_IXP23XX_CPP_XSI 22 /* cpp2xsi_int */
-#define IRQ_IXP23XX_ME_ATTN0 23 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN1 24 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN2 25 /* ME_ATTN */
-#define IRQ_IXP23XX_ME_ATTN3 26 /* ME_ATTN */
-#define IRQ_IXP23XX_PCI_ERR_RPH 27 /* PCXG_PCI_ERR_RPH */
-#define IRQ_IXP23XX_D0XG_ECC_CORR 28 /* D0XG_DRAM_ECC_CORR */
-#define IRQ_IXP23XX_D0XG_ECC_UNCORR 29 /* D0XG_DRAM_ECC_UNCORR */
-#define IRQ_IXP23XX_SRAM_ERR1 30 /* SRAM1_ERR */
-#define IRQ_IXP23XX_SRAM_ERR0 31 /* SRAM0_ERR */
-#define IRQ_IXP23XX_MEDIA_ERR 32 /* MEDIA_ERR */
-#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ 33 /* STH_DRAM0_ECC_MAJ */
-#define IRQ_IXP23XX_GPIO6 34 /* GPIO0 interrupts */
-#define IRQ_IXP23XX_GPIO7 35 /* GPIO1 interrupts */
-#define IRQ_IXP23XX_GPIO8 36 /* GPIO2 interrupts */
-#define IRQ_IXP23XX_GPIO9 37 /* GPIO3 interrupts */
-#define IRQ_IXP23XX_GPIO10 38 /* GPIO4 interrupts */
-#define IRQ_IXP23XX_GPIO11 39 /* GPIO5 interrupts */
-#define IRQ_IXP23XX_GPIO12 40 /* GPIO6 interrupts */
-#define IRQ_IXP23XX_GPIO13 41 /* GPIO7 interrupts */
-#define IRQ_IXP23XX_GPIO14 42 /* GPIO8 interrupts */
-#define IRQ_IXP23XX_GPIO15 43 /* GPIO9 interrupts */
-#define IRQ_IXP23XX_SHAC_RING0 44 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING1 45 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING2 46 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING3 47 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING4 48 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING5 49 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING6 50 /* SHAC RING Full */
-#define IRQ_IXP23XX_SHAC_RING7 51 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING8 52 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING9 53 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING10 54 /* SHAC Ring Full */
-#define IRQ_IXP23XX_SHAC_RING11 55 /* SHAC Ring Full */
-#define IRQ_IXP23XX_ME_THREAD_A0_ME0 56 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A1_ME0 57 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A2_ME0 58 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A3_ME0 59 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A4_ME0 60 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A5_ME0 61 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A6_ME0 62 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A7_ME0 63 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A8_ME1 64 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A9_ME1 65 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A10_ME1 66 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A11_ME1 67 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A12_ME1 68 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A13_ME1 69 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A14_ME1 70 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A15_ME1 71 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A16_ME2 72 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A17_ME2 73 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A18_ME2 74 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A19_ME2 75 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A20_ME2 76 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A21_ME2 77 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A22_ME2 78 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A23_ME2 79 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A24_ME3 80 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A25_ME3 81 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A26_ME3 82 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A27_ME3 83 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A28_ME3 84 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A29_ME3 85 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A30_ME3 86 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_A31_ME3 87 /* ME_THREAD_A */
-#define IRQ_IXP23XX_ME_THREAD_B0_ME0 88 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B1_ME0 89 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B2_ME0 90 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B3_ME0 91 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B4_ME0 92 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B5_ME0 93 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B6_ME0 94 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B7_ME0 95 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B8_ME1 96 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B9_ME1 97 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B10_ME1 98 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B11_ME1 99 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B12_ME1 100 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B13_ME1 101 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B14_ME1 102 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B15_ME1 103 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B16_ME2 104 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B17_ME2 105 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B18_ME2 106 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B19_ME2 107 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B20_ME2 108 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B21_ME2 109 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B22_ME2 110 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B23_ME2 111 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B24_ME3 112 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B25_ME3 113 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B26_ME3 114 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B27_ME3 115 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B28_ME3 116 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B29_ME3 117 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B30_ME3 118 /* ME_THREAD_B */
-#define IRQ_IXP23XX_ME_THREAD_B31_ME3 119 /* ME_THREAD_B */
-
-#define NUM_IXP23XX_RAW_IRQS 120
-
-#define IRQ_IXP23XX_INTA 120 /* Indirect pcxg_pci_int_rph */
-#define IRQ_IXP23XX_INTB 121 /* Indirect pcxg_pci_int_rph */
-
-#define NR_IXP23XX_IRQ (IRQ_IXP23XX_INTB + 1)
-
-/*
- * We default to 32 per-board IRQs. Increase this number if you need
- * more, but keep it realistic.
- */
-#define NR_IXP23XX_MACH_IRQS 32
-
-#define NR_IRQS (NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
-
-#define IXP23XX_MACH_IRQ(irq) (NR_IXP23XX_IRQ + (irq))
-
-
-/*
- * IXDP2351-specific interrupts
- */
-
-/*
- * External PCI interrupts signaled through INTB
- *
- */
-#define IXDP2351_INTB_IRQ_BASE 0
-#define IRQ_IXDP2351_INTA_82546 IXP23XX_MACH_IRQ(0)
-#define IRQ_IXDP2351_INTB_82546 IXP23XX_MACH_IRQ(1)
-#define IRQ_IXDP2351_SPCI_DB_0 IXP23XX_MACH_IRQ(2)
-#define IRQ_IXDP2351_SPCI_DB_1 IXP23XX_MACH_IRQ(3)
-#define IRQ_IXDP2351_SPCI_PMC_INTA IXP23XX_MACH_IRQ(4)
-#define IRQ_IXDP2351_SPCI_PMC_INTB IXP23XX_MACH_IRQ(5)
-#define IRQ_IXDP2351_SPCI_PMC_INTC IXP23XX_MACH_IRQ(6)
-#define IRQ_IXDP2351_SPCI_PMC_INTD IXP23XX_MACH_IRQ(7)
-#define IRQ_IXDP2351_SPCI_FIC IXP23XX_MACH_IRQ(8)
-
-#define IXDP2351_INTB_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(0))
-#define IXDP2351_INTB_IRQ_MASK(irq) (1 << IXDP2351_INTB_IRQ_BIT(irq))
-#define IXDP2351_INTB_IRQ_VALID 0x01FF
-#define IXDP2351_INTB_IRQ_NUM 16
-
-/*
- * Other external interrupts signaled through INTA
- */
-#define IXDP2351_INTA_IRQ_BASE 16
-#define IRQ_IXDP2351_IPMI_FROM IXP23XX_MACH_IRQ(16)
-#define IRQ_IXDP2351_125US IXP23XX_MACH_IRQ(17)
-#define IRQ_IXDP2351_DB_0_ADD IXP23XX_MACH_IRQ(18)
-#define IRQ_IXDP2351_DB_1_ADD IXP23XX_MACH_IRQ(19)
-#define IRQ_IXDP2351_DEBUG1 IXP23XX_MACH_IRQ(20)
-#define IRQ_IXDP2351_ADD_UART IXP23XX_MACH_IRQ(21)
-#define IRQ_IXDP2351_FIC_ADD IXP23XX_MACH_IRQ(24)
-#define IRQ_IXDP2351_CS8900 IXP23XX_MACH_IRQ(25)
-#define IRQ_IXDP2351_BBSRAM IXP23XX_MACH_IRQ(26)
-#define IRQ_IXDP2351_CONFIG_MEDIA IXP23XX_MACH_IRQ(27)
-#define IRQ_IXDP2351_CLOCK_REF IXP23XX_MACH_IRQ(28)
-#define IRQ_IXDP2351_A10_NP IXP23XX_MACH_IRQ(29)
-#define IRQ_IXDP2351_A11_NP IXP23XX_MACH_IRQ(30)
-#define IRQ_IXDP2351_DEBUG_NP IXP23XX_MACH_IRQ(31)
-
-#define IXDP2351_INTA_IRQ_BIT(irq) (irq - IXP23XX_MACH_IRQ(16))
-#define IXDP2351_INTA_IRQ_MASK(irq) (1 << IXDP2351_INTA_IRQ_BIT(irq))
-#define IXDP2351_INTA_IRQ_VALID 0xFF3F
-#define IXDP2351_INTA_IRQ_NUM 16
-
-
-/*
- * ADI RoadRunner IRQs
- */
-#define IRQ_ROADRUNNER_PCI_INTA IRQ_IXP23XX_INTA
-#define IRQ_ROADRUNNER_PCI_INTB IRQ_IXP23XX_INTB
-#define IRQ_ROADRUNNER_PCI_INTC IRQ_IXP23XX_GPIO11
-#define IRQ_ROADRUNNER_PCI_INTD IRQ_IXP23XX_GPIO12
-
-/*
- * Put new board definitions here
- */
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
- *
- * Register and other defines for IXDP2351
- *
- * Copyright (c) 2002-2004 Intel Corp.
- * Copytight (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_IXDP2351_H
-#define __ASM_ARCH_IXDP2351_H
-
-/*
- * NP module memory map
- */
-#define IXDP2351_NP_PHYS_BASE (IXP23XX_EXP_BUS_CS4_BASE)
-#define IXDP2351_NP_PHYS_SIZE 0x00100000
-#define IXDP2351_NP_VIRT_BASE 0xeff00000
-
-#define IXDP2351_VIRT_CS8900_BASE (IXDP2351_NP_VIRT_BASE)
-#define IXDP2351_VIRT_CS8900_END (IXDP2351_VIRT_CS8900_BASE + 16)
-
-#define IXDP2351_VIRT_NP_CPLD_BASE (IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
-
-#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
-
-#define IXDP2351_NP_CPLD_RESET1_REG IXDP2351_NP_CPLD_REG(0x00)
-#define IXDP2351_NP_CPLD_LED_REG IXDP2351_NP_CPLD_REG(0x02)
-#define IXDP2351_NP_CPLD_VERSION_REG IXDP2351_NP_CPLD_REG(0x04)
-
-/*
- * Base board module memory map
- */
-
-#define IXDP2351_BB_BASE_PHYS (IXP23XX_EXP_BUS_CS5_BASE)
-#define IXDP2351_BB_SIZE 0x01000000
-#define IXDP2351_BB_BASE_VIRT (0xee000000)
-
-#define IXDP2351_BB_AREA_BASE(offset) (IXDP2351_BB_BASE_VIRT + offset)
-
-#define IXDP2351_VIRT_NVRAM_BASE IXDP2351_BB_AREA_BASE(0x0)
-#define IXDP2351_NVRAM_SIZE (0x20000)
-
-#define IXDP2351_VIRT_MB_IXF1104_BASE IXDP2351_BB_AREA_BASE(0x00020000)
-#define IXDP2351_VIRT_ADD_UART_BASE IXDP2351_BB_AREA_BASE(0x000240C0)
-#define IXDP2351_VIRT_FIC_BASE IXDP2351_BB_AREA_BASE(0x00200000)
-#define IXDP2351_VIRT_DB0_BASE IXDP2351_BB_AREA_BASE(0x00400000)
-#define IXDP2351_VIRT_DB1_BASE IXDP2351_BB_AREA_BASE(0x00600000)
-#define IXDP2351_VIRT_CPLD_BASE IXDP2351_BB_AREA_BASE(0x00024000)
-
-/*
- * On board CPLD registers
- */
-#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
-
-#define IXDP2351_CPLD_RESET0_REG IXDP2351_CPLD_BB_REG(0x00)
-#define IXDP2351_CPLD_RESET1_REG IXDP2351_CPLD_BB_REG(0x04)
-
-#define IXDP2351_CPLD_RESET1_MAGIC 0x55AA
-#define IXDP2351_CPLD_RESET1_ENABLE 0x8000
-
-#define IXDP2351_CPLD_FPGA_CONFIG_REG IXDP2351_CPLD_BB_REG(0x08)
-#define IXDP2351_CPLD_INTB_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x10)
-#define IXDP2351_CPLD_INTA_MASK_SET_REG IXDP2351_CPLD_BB_REG(0x14)
-#define IXDP2351_CPLD_INTB_STAT_REG IXDP2351_CPLD_BB_REG(0x18)
-#define IXDP2351_CPLD_INTA_STAT_REG IXDP2351_CPLD_BB_REG(0x1C)
-#define IXDP2351_CPLD_INTB_RAW_REG IXDP2351_CPLD_BB_REG(0x20) /* read */
-#define IXDP2351_CPLD_INTA_RAW_REG IXDP2351_CPLD_BB_REG(0x24) /* read */
-#define IXDP2351_CPLD_INTB_MASK_CLR_REG IXDP2351_CPLD_INTB_RAW_REG /* write */
-#define IXDP2351_CPLD_INTA_MASK_CLR_REG IXDP2351_CPLD_INTA_RAW_REG /* write */
-#define IXDP2351_CPLD_INTB_SIM_REG IXDP2351_CPLD_BB_REG(0x28)
-#define IXDP2351_CPLD_INTA_SIM_REG IXDP2351_CPLD_BB_REG(0x2C)
- /* Interrupt bits are defined in irqs.h */
-#define IXDP2351_CPLD_BB_GBE0_REG IXDP2351_CPLD_BB_REG(0x30)
-#define IXDP2351_CPLD_BB_GBE1_REG IXDP2351_CPLD_BB_REG(0x34)
-
-/* #define IXDP2351_CPLD_BB_MISC_REG IXDP2351_CPLD_REG(0x1C) */
-/* #define IXDP2351_CPLD_BB_MISC_REV_MASK 0xFF */
-/* #define IXDP2351_CPLD_BB_GDXCS0_REG IXDP2351_CPLD_REG(0x24) */
-/* #define IXDP2351_CPLD_BB_GDXCS1_REG IXDP2351_CPLD_REG(0x28) */
-/* #define IXDP2351_CPLD_BB_CLOCK_REG IXDP2351_CPLD_REG(0x04) */
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
- *
- * Register definitions for IXP23XX
- *
- * Copyright (C) 2003-2005 Intel Corporation.
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_IXP23XX_H
-#define __ASM_ARCH_IXP23XX_H
-
-/*
- * IXP2300 linux memory map:
- *
- * virt phys size
- * fffd0000 a0000000 64K XSI2CPP_CSR
- * fffc0000 c4000000 4K EXP_CFG
- * fff00000 c8000000 64K PERIPHERAL
- * fe000000 1c0000000 16M CAP_CSR
- * fd000000 1c8000000 16M MSF_CSR
- * fb000000 16M ---
- * fa000000 1d8000000 32M PCI_IO
- * f8000000 1da000000 32M PCI_CFG
- * f6000000 1de000000 32M PCI_CREG
- * f4000000 32M ---
- * f0000000 1e0000000 64M PCI_MEM
- * e[c-f]000000 per-platform mappings
- */
-
-
-/****************************************************************************
- * Static mappings.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_CSR_PHYS 0xa0000000
-#define IXP23XX_XSI2CPP_CSR_VIRT 0xfffd0000
-#define IXP23XX_XSI2CPP_CSR_SIZE 0x00010000
-
-#define IXP23XX_EXP_CFG_PHYS 0xc4000000
-#define IXP23XX_EXP_CFG_VIRT 0xfffc0000
-#define IXP23XX_EXP_CFG_SIZE 0x00001000
-
-#define IXP23XX_PERIPHERAL_PHYS 0xc8000000
-#define IXP23XX_PERIPHERAL_VIRT 0xfff00000
-#define IXP23XX_PERIPHERAL_SIZE 0x00010000
-
-#define IXP23XX_CAP_CSR_PHYS 0x1c0000000ULL
-#define IXP23XX_CAP_CSR_VIRT 0xfe000000
-#define IXP23XX_CAP_CSR_SIZE 0x01000000
-
-#define IXP23XX_MSF_CSR_PHYS 0x1c8000000ULL
-#define IXP23XX_MSF_CSR_VIRT 0xfd000000
-#define IXP23XX_MSF_CSR_SIZE 0x01000000
-
-#define IXP23XX_PCI_IO_PHYS 0x1d8000000ULL
-#define IXP23XX_PCI_IO_VIRT 0xfa000000
-#define IXP23XX_PCI_IO_SIZE 0x02000000
-
-#define IXP23XX_PCI_CFG_PHYS 0x1da000000ULL
-#define IXP23XX_PCI_CFG_VIRT 0xf8000000
-#define IXP23XX_PCI_CFG_SIZE 0x02000000
-#define IXP23XX_PCI_CFG0_VIRT IXP23XX_PCI_CFG_VIRT
-#define IXP23XX_PCI_CFG1_VIRT (IXP23XX_PCI_CFG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_CREG_PHYS 0x1de000000ULL
-#define IXP23XX_PCI_CREG_VIRT 0xf6000000
-#define IXP23XX_PCI_CREG_SIZE 0x02000000
-#define IXP23XX_PCI_CSR_VIRT (IXP23XX_PCI_CREG_VIRT + 0x01000000)
-
-#define IXP23XX_PCI_MEM_START 0xe0000000
-#define IXP23XX_PCI_MEM_PHYS 0x1e0000000ULL
-#define IXP23XX_PCI_MEM_VIRT 0xf0000000
-#define IXP23XX_PCI_MEM_SIZE 0x04000000
-
-
-/****************************************************************************
- * XSI2CPP CSRs.
- ****************************************************************************/
-#define IXP23XX_XSI2CPP_REG(x) ((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
-#define IXP23XX_CPP2XSI_CURR_XFER_REG3 IXP23XX_XSI2CPP_REG(0xf8)
-#define IXP23XX_CPP2XSI_ADDR_31 (1 << 19)
-#define IXP23XX_CPP2XSI_PSH_OFF (1 << 20)
-#define IXP23XX_CPP2XSI_COH_OFF (1 << 21)
-
-
-/****************************************************************************
- * Expansion Bus Config.
- ****************************************************************************/
-#define IXP23XX_EXP_CFG_REG(x) ((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
-#define IXP23XX_EXP_CS0 IXP23XX_EXP_CFG_REG(0x00)
-#define IXP23XX_EXP_CS1 IXP23XX_EXP_CFG_REG(0x04)
-#define IXP23XX_EXP_CS2 IXP23XX_EXP_CFG_REG(0x08)
-#define IXP23XX_EXP_CS3 IXP23XX_EXP_CFG_REG(0x0c)
-#define IXP23XX_EXP_CS4 IXP23XX_EXP_CFG_REG(0x10)
-#define IXP23XX_EXP_CS5 IXP23XX_EXP_CFG_REG(0x14)
-#define IXP23XX_EXP_CS6 IXP23XX_EXP_CFG_REG(0x18)
-#define IXP23XX_EXP_CS7 IXP23XX_EXP_CFG_REG(0x1c)
-#define IXP23XX_FLASH_WRITABLE (0x2)
-#define IXP23XX_FLASH_BUS8 (0x1)
-
-#define IXP23XX_EXP_CFG0 IXP23XX_EXP_CFG_REG(0x20)
-#define IXP23XX_EXP_CFG1 IXP23XX_EXP_CFG_REG(0x24)
-#define IXP23XX_EXP_CFG0_MEM_MAP (1 << 31)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL (3 << 22)
-#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN (1 << 21)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL (3 << 19)
-#define IXP23XX_EXP_CFG0_CPP_SPEED_EN (1 << 18)
-#define IXP23XX_EXP_CFG0_PCI_SWIN (3 << 16)
-#define IXP23XX_EXP_CFG0_PCI_DWIN (3 << 14)
-#define IXP23XX_EXP_CFG0_PCI33_MODE (1 << 13)
-#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL (1 << 12)
-#define IXP23XX_EXP_CFG0_CPP_DIV_SEL (1 << 5)
-#define IXP23XX_EXP_CFG0_XSI_NOT_PRES (1 << 4)
-#define IXP23XX_EXP_CFG0_PROM_BOOT (1 << 3)
-#define IXP23XX_EXP_CFG0_PCI_ARB (1 << 2)
-#define IXP23XX_EXP_CFG0_PCI_HOST (1 << 1)
-#define IXP23XX_EXP_CFG0_FLASH_WIDTH (1 << 0)
-
-#define IXP23XX_EXP_UNIT_FUSE IXP23XX_EXP_CFG_REG(0x28)
-#define IXP23XX_EXP_MSF_MUX IXP23XX_EXP_CFG_REG(0x30)
-#define IXP23XX_EXP_CFG_FUSE IXP23XX_EXP_CFG_REG(0x34)
-
-#define IXP23XX_EXP_BUS_PHYS 0x90000000
-#define IXP23XX_EXP_BUS_WINDOW_SIZE 0x01000000
-
-#define IXP23XX_EXP_BUS_CS0_BASE (IXP23XX_EXP_BUS_PHYS + 0x00000000)
-#define IXP23XX_EXP_BUS_CS1_BASE (IXP23XX_EXP_BUS_PHYS + 0x01000000)
-#define IXP23XX_EXP_BUS_CS2_BASE (IXP23XX_EXP_BUS_PHYS + 0x02000000)
-#define IXP23XX_EXP_BUS_CS3_BASE (IXP23XX_EXP_BUS_PHYS + 0x03000000)
-#define IXP23XX_EXP_BUS_CS4_BASE (IXP23XX_EXP_BUS_PHYS + 0x04000000)
-#define IXP23XX_EXP_BUS_CS5_BASE (IXP23XX_EXP_BUS_PHYS + 0x05000000)
-#define IXP23XX_EXP_BUS_CS6_BASE (IXP23XX_EXP_BUS_PHYS + 0x06000000)
-#define IXP23XX_EXP_BUS_CS7_BASE (IXP23XX_EXP_BUS_PHYS + 0x07000000)
-
-
-/****************************************************************************
- * Peripherals.
- ****************************************************************************/
-#define IXP23XX_UART1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x0000)
-#define IXP23XX_UART2_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x1000)
-#define IXP23XX_PMU_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x2000)
-#define IXP23XX_INTC_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x3000)
-#define IXP23XX_GPIO_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x4000)
-#define IXP23XX_TIMER_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x5000)
-#define IXP23XX_NPE0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x6000)
-#define IXP23XX_DSR_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x7000)
-#define IXP23XX_NPE1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x8000)
-#define IXP23XX_ETH0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0x9000)
-#define IXP23XX_ETH1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xA000)
-#define IXP23XX_GIG0_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xB000)
-#define IXP23XX_GIG1_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xC000)
-#define IXP23XX_DDRS_VIRT (IXP23XX_PERIPHERAL_VIRT + 0xD000)
-
-#define IXP23XX_UART1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x0000)
-#define IXP23XX_UART2_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x1000)
-#define IXP23XX_PMU_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x2000)
-#define IXP23XX_INTC_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x3000)
-#define IXP23XX_GPIO_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x4000)
-#define IXP23XX_TIMER_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x5000)
-#define IXP23XX_NPE0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x6000)
-#define IXP23XX_DSR_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x7000)
-#define IXP23XX_NPE1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x8000)
-#define IXP23XX_ETH0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0x9000)
-#define IXP23XX_ETH1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xA000)
-#define IXP23XX_GIG0_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xB000)
-#define IXP23XX_GIG1_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xC000)
-#define IXP23XX_DDRS_PHYS (IXP23XX_PERIPHERAL_PHYS + 0xD000)
-
-
-/****************************************************************************
- * Interrupt controller.
- ****************************************************************************/
-#define IXP23XX_INTC_REG(x) ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
-#define IXP23XX_INTR_ST1 IXP23XX_INTC_REG(0x00)
-#define IXP23XX_INTR_ST2 IXP23XX_INTC_REG(0x04)
-#define IXP23XX_INTR_ST3 IXP23XX_INTC_REG(0x08)
-#define IXP23XX_INTR_ST4 IXP23XX_INTC_REG(0x0c)
-#define IXP23XX_INTR_EN1 IXP23XX_INTC_REG(0x10)
-#define IXP23XX_INTR_EN2 IXP23XX_INTC_REG(0x14)
-#define IXP23XX_INTR_EN3 IXP23XX_INTC_REG(0x18)
-#define IXP23XX_INTR_EN4 IXP23XX_INTC_REG(0x1c)
-#define IXP23XX_INTR_SEL1 IXP23XX_INTC_REG(0x20)
-#define IXP23XX_INTR_SEL2 IXP23XX_INTC_REG(0x24)
-#define IXP23XX_INTR_SEL3 IXP23XX_INTC_REG(0x28)
-#define IXP23XX_INTR_SEL4 IXP23XX_INTC_REG(0x2c)
-#define IXP23XX_INTR_IRQ_ST1 IXP23XX_INTC_REG(0x30)
-#define IXP23XX_INTR_IRQ_ST2 IXP23XX_INTC_REG(0x34)
-#define IXP23XX_INTR_IRQ_ST3 IXP23XX_INTC_REG(0x38)
-#define IXP23XX_INTR_IRQ_ST4 IXP23XX_INTC_REG(0x3c)
-#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET 0x54
-
-
-/****************************************************************************
- * GPIO.
- ****************************************************************************/
-#define IXP23XX_GPIO_REG(x) ((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
-#define IXP23XX_GPIO_GPOUTR IXP23XX_GPIO_REG(0x00)
-#define IXP23XX_GPIO_GPOER IXP23XX_GPIO_REG(0x04)
-#define IXP23XX_GPIO_GPINR IXP23XX_GPIO_REG(0x08)
-#define IXP23XX_GPIO_GPISR IXP23XX_GPIO_REG(0x0c)
-#define IXP23XX_GPIO_GPIT1R IXP23XX_GPIO_REG(0x10)
-#define IXP23XX_GPIO_GPIT2R IXP23XX_GPIO_REG(0x14)
-#define IXP23XX_GPIO_GPCLKR IXP23XX_GPIO_REG(0x18)
-#define IXP23XX_GPIO_GPDBSELR IXP23XX_GPIO_REG(0x1c)
-
-#define IXP23XX_GPIO_STYLE_MASK 0x7
-#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH 0x0
-#define IXP23XX_GPIO_STYLE_ACTIVE_LOW 0x1
-#define IXP23XX_GPIO_STYLE_RISING_EDGE 0x2
-#define IXP23XX_GPIO_STYLE_FALLING_EDGE 0x3
-#define IXP23XX_GPIO_STYLE_TRANSITIONAL 0x4
-
-#define IXP23XX_GPIO_STYLE_SIZE 3
-
-
-/****************************************************************************
- * Timer.
- ****************************************************************************/
-#define IXP23XX_TIMER_REG(x) ((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
-#define IXP23XX_TIMER_CONT IXP23XX_TIMER_REG(0x00)
-#define IXP23XX_TIMER1_TIMESTAMP IXP23XX_TIMER_REG(0x04)
-#define IXP23XX_TIMER1_RELOAD IXP23XX_TIMER_REG(0x08)
-#define IXP23XX_TIMER2_TIMESTAMP IXP23XX_TIMER_REG(0x0c)
-#define IXP23XX_TIMER2_RELOAD IXP23XX_TIMER_REG(0x10)
-#define IXP23XX_TIMER_WDOG IXP23XX_TIMER_REG(0x14)
-#define IXP23XX_TIMER_WDOG_EN IXP23XX_TIMER_REG(0x18)
-#define IXP23XX_TIMER_WDOG_KEY IXP23XX_TIMER_REG(0x1c)
-#define IXP23XX_TIMER_WDOG_KEY_MAGIC 0x482e
-#define IXP23XX_TIMER_STATUS IXP23XX_TIMER_REG(0x20)
-#define IXP23XX_TIMER_SOFT_RESET IXP23XX_TIMER_REG(0x24)
-#define IXP23XX_TIMER_SOFT_RESET_EN IXP23XX_TIMER_REG(0x28)
-
-#define IXP23XX_TIMER_ENABLE (1 << 0)
-#define IXP23XX_TIMER_ONE_SHOT (1 << 1)
-/* Low order bits of reload value ignored */
-#define IXP23XX_TIMER_RELOAD_MASK (0x3)
-#define IXP23XX_TIMER_DISABLED (0x0)
-#define IXP23XX_TIMER1_INT_PEND (1 << 0)
-#define IXP23XX_TIMER2_INT_PEND (1 << 1)
-#define IXP23XX_TIMER_STATUS_TS_PEND (1 << 2)
-#define IXP23XX_TIMER_STATUS_WDOG_PEND (1 << 3)
-#define IXP23XX_TIMER_STATUS_WARM_RESET (1 << 4)
-
-
-/****************************************************************************
- * CAP CSRs.
- ****************************************************************************/
-#define IXP23XX_GLOBAL_REG(x) ((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
-#define IXP23XX_PRODUCT_ID IXP23XX_GLOBAL_REG(0x00)
-#define IXP23XX_MISC_CONTROL IXP23XX_GLOBAL_REG(0x04)
-#define IXP23XX_MSF_CLK_CNTRL IXP23XX_GLOBAL_REG(0x08)
-#define IXP23XX_RESET0 IXP23XX_GLOBAL_REG(0x0c)
-#define IXP23XX_RESET1 IXP23XX_GLOBAL_REG(0x10)
-#define IXP23XX_STRAP_OPTIONS IXP23XX_GLOBAL_REG(0x18)
-
-#define IXP23XX_ENABLE_WATCHDOG (1 << 24)
-#define IXP23XX_SHPC_INIT_COMP (1 << 21)
-#define IXP23XX_RST_ALL (1 << 16)
-#define IXP23XX_RESET_PCI (1 << 2)
-#define IXP23XX_PCI_UNIT_RESET (1 << 1)
-#define IXP23XX_XSCALE_RESET (1 << 0)
-
-#define IXP23XX_UENGINE_CSR_VIRT_BASE (IXP23XX_CAP_CSR_VIRT + 0x18000)
-
-
-/****************************************************************************
- * PCI CSRs.
- ****************************************************************************/
-#define IXP23XX_PCI_CREG(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
-#define IXP23XX_PCI_CMDSTAT IXP23XX_PCI_CREG(0x04)
-#define IXP23XX_PCI_SRAM_BAR IXP23XX_PCI_CREG(0x14)
-#define IXP23XX_PCI_SDRAM_BAR IXP23XX_PCI_CREG(0x18)
-
-
-#define IXP23XX_PCI_CSR(x) ((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
-#define IXP23XX_PCI_OUT_INT_STATUS IXP23XX_PCI_CSR(0x0030)
-#define IXP23XX_PCI_OUT_INT_MASK IXP23XX_PCI_CSR(0x0034)
-#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
-#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
-#define IXP23XX_PCI_CONTROL IXP23XX_PCI_CSR(0x013c)
-#define IXP23XX_PCI_ADDR_EXT IXP23XX_PCI_CSR(0x0140)
-#define IXP23XX_PCI_ME_PUSH_STATUS IXP23XX_PCI_CSR(0x0148)
-#define IXP23XX_PCI_ME_PUSH_EN IXP23XX_PCI_CSR(0x014c)
-#define IXP23XX_PCI_ERR_STATUS IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERROR_STATUS IXP23XX_PCI_CSR(0x0150)
-#define IXP23XX_PCI_ERR_ENABLE IXP23XX_PCI_CSR(0x0154)
-#define IXP23XX_PCI_XSCALE_INT_STATUS IXP23XX_PCI_CSR(0x0158)
-#define IXP23XX_PCI_XSCALE_INT_ENABLE IXP23XX_PCI_CSR(0x015c)
-#define IXP23XX_PCI_CPP_ADDR_BITS IXP23XX_PCI_CSR(0x0160)
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/memory.h
- *
- * Copyright (c) 2003-2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <mach/hardware.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET (0x00000000)
-
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
-
-#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
-
-#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
-
-#define arch_is_coherent() 1
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/platform.h
- *
- * Various bits of code used by platform-level code.
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASSEMBLY__
-
-static inline unsigned long ixp2000_reg_read(volatile void *reg)
-{
- return *((volatile unsigned long *)reg);
-}
-
-static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
-{
- *((volatile unsigned long *)reg) = val;
-}
-
-struct pci_sys_data;
-
-void ixp23xx_map_io(void);
-void ixp23xx_init_irq(void);
-void ixp23xx_sys_init(void);
-void ixp23xx_restart(char, const char *);
-int ixp23xx_pci_setup(int, struct pci_sys_data *);
-void ixp23xx_pci_preinit(void);
-struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
-void ixp23xx_pci_slave_init(void);
-
-extern struct sys_timer ixp23xx_timer;
-
-#define IXP23XX_UART_XTAL 14745600
-
-#ifndef __ASSEMBLY__
-/*
- * Is system memory on the XSI or CPP bus?
- */
-static inline unsigned ixp23xx_cpp_boot(void)
-{
- return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
-}
-#endif
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/time.h
- */
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/timex.h
- *
- * XScale architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE 75000000
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/include/mach/uncompress.h
- *
- * Copyright (C) 2002-2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/ixp23xx.h>
-#include <linux/serial_reg.h>
-
-#define UART_BASE ((volatile u32 *)IXP23XX_UART1_PHYS)
-
-static inline void putc(char c)
-{
- int j;
-
- for (j = 0; j < 0x1000; j++) {
- if (UART_BASE[UART_LSR] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- UART_BASE[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/ixdp2351.c
- *
- * IXDP2351 board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2004 (c) Intel Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * IXDP2351 Interrupt Handling
- */
-static void ixdp2351_inta_mask(struct irq_data *d)
-{
- *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_unmask(struct irq_data *d)
-{
- *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc)
-{
- u16 ex_interrupt =
- *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID;
- int i;
-
- desc->irq_data.chip->irq_mask(&desc->irq_data);
-
- for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) {
- if (ex_interrupt & (1 << i)) {
- int cpld_irq =
- IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i);
- generic_handle_irq(cpld_irq);
- }
- }
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_inta_chip = {
- .irq_ack = ixdp2351_inta_mask,
- .irq_mask = ixdp2351_inta_mask,
- .irq_unmask = ixdp2351_inta_unmask
-};
-
-static void ixdp2351_intb_mask(struct irq_data *d)
-{
- *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_unmask(struct irq_data *d)
-{
- *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq);
-}
-
-static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc)
-{
- u16 ex_interrupt =
- *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID;
- int i;
-
- desc->irq_data.chip->irq_ack(&desc->irq_data);
-
- for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) {
- if (ex_interrupt & (1 << i)) {
- int cpld_irq =
- IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i);
- generic_handle_irq(cpld_irq);
- }
- }
-
- desc->irq_data.chip->irq_unmask(&desc->irq_data);
-}
-
-static struct irq_chip ixdp2351_intb_chip = {
- .irq_ack = ixdp2351_intb_mask,
- .irq_mask = ixdp2351_intb_mask,
- .irq_unmask = ixdp2351_intb_unmask
-};
-
-void __init ixdp2351_init_irq(void)
-{
- int irq;
-
- /* Mask all interrupts from CPLD, disable simulation */
- *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1;
- *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1;
- *IXDP2351_CPLD_INTA_SIM_REG = 0;
- *IXDP2351_CPLD_INTB_SIM_REG = 0;
-
- ixp23xx_init_irq();
-
- for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE);
- irq <
- IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM);
- irq++) {
- if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) {
- set_irq_flags(irq, IRQF_VALID);
- irq_set_chip_and_handler(irq, &ixdp2351_inta_chip,
- handle_level_irq);
- }
- }
-
- for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE);
- irq <
- IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM);
- irq++) {
- if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) {
- set_irq_flags(irq, IRQF_VALID);
- irq_set_chip_and_handler(irq, &ixdp2351_intb_chip,
- handle_level_irq);
- }
- }
-
- irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler);
- irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler);
-}
-
-/*
- * IXDP2351 PCI
- */
-
-/*
- * This board does not do normal PCI IRQ routing, or any
- * sort of swizzling, so we just need to check where on the
- * bus the device is and figure out what CPLD pin it is
- * being routed to.
- */
-#define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
-
-static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- u8 bus = dev->bus->number;
- u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin);
- struct pci_bus *tmp_bus = dev->bus;
-
- /* Primary bus, no interrupts here */
- if (!bus)
- return -1;
-
- /* Lookup first leaf in bus tree */
- while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL))
- tmp_bus = tmp_bus->parent;
-
- /* Select between known bridges */
- switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) {
- /* Device is located after first bridge */
- case 0x0008:
- if (tmp_bus == dev->bus) {
- /* Device is located directy after first bridge */
- switch (devpin) {
- /* Onboard 82546 */
- case DEVPIN(1, 1): /* Onboard 82546 ch 0 */
- return IRQ_IXDP2351_INTA_82546;
- case DEVPIN(1, 2): /* Onboard 82546 ch 1 */
- return IRQ_IXDP2351_INTB_82546;
- /* PMC SLOT */
- case DEVPIN(0, 1): /* PMCP INTA# */
- case DEVPIN(2, 4): /* PMCS INTD# */
- return IRQ_IXDP2351_SPCI_PMC_INTA;
- case DEVPIN(0, 2): /* PMCP INTB# */
- case DEVPIN(2, 1): /* PMCS INTA# */
- return IRQ_IXDP2351_SPCI_PMC_INTB;
- case DEVPIN(0, 3): /* PMCP INTC# */
- case DEVPIN(2, 2): /* PMCS INTB# */
- return IRQ_IXDP2351_SPCI_PMC_INTC;
- case DEVPIN(0, 4): /* PMCP INTD# */
- case DEVPIN(2, 3): /* PMCS INTC# */
- return IRQ_IXDP2351_SPCI_PMC_INTD;
- }
- } else {
- /* Device is located indirectly after first bridge */
- /* Not supported now */
- return -1;
- }
- break;
- case 0x0010:
- if (tmp_bus == dev->bus) {
- /* Device is located directy after second bridge */
- /* Secondary bus of second bridge */
- switch (devpin) {
- case DEVPIN(0, 1): /* DB#0 */
- case DEVPIN(0, 2):
- case DEVPIN(0, 3):
- case DEVPIN(0, 4):
- return IRQ_IXDP2351_SPCI_DB_0;
- case DEVPIN(1, 1): /* DB#1 */
- case DEVPIN(1, 2):
- case DEVPIN(1, 3):
- case DEVPIN(1, 4):
- return IRQ_IXDP2351_SPCI_DB_1;
- case DEVPIN(2, 1): /* FIC1 */
- case DEVPIN(2, 2):
- case DEVPIN(2, 3):
- case DEVPIN(2, 4):
- case DEVPIN(3, 1): /* FIC2 */
- case DEVPIN(3, 2):
- case DEVPIN(3, 3):
- case DEVPIN(3, 4):
- return IRQ_IXDP2351_SPCI_FIC;
- }
- } else {
- /* Device is located indirectly after second bridge */
- /* Not supported now */
- return -1;
- }
- break;
- }
-
- return -1;
-}
-
-struct hw_pci ixdp2351_pci __initdata = {
- .nr_controllers = 1,
- .preinit = ixp23xx_pci_preinit,
- .setup = ixp23xx_pci_setup,
- .scan = ixp23xx_pci_scan_bus,
- .map_irq = ixdp2351_map_irq,
-};
-
-int __init ixdp2351_pci_init(void)
-{
- if (machine_is_ixdp2351())
- pci_common_init(&ixdp2351_pci);
-
- return 0;
-}
-
-subsys_initcall(ixdp2351_pci_init);
-
-/*
- * IXDP2351 Static Mapped I/O
- */
-static struct map_desc ixdp2351_io_desc[] __initdata = {
- {
- .virtual = IXDP2351_NP_VIRT_BASE,
- .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE),
- .length = IXDP2351_NP_PHYS_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = IXDP2351_BB_BASE_VIRT,
- .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS),
- .length = IXDP2351_BB_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ixdp2351_map_io(void)
-{
- ixp23xx_map_io();
- iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc));
-}
-
-static struct physmap_flash_data ixdp2351_flash_data = {
- .width = 1,
-};
-
-static struct resource ixdp2351_flash_resource = {
- .start = 0x90000000,
- .end = 0x93ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ixdp2351_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ixdp2351_flash_data,
- },
- .num_resources = 1,
- .resource = &ixdp2351_flash_resource,
-};
-
-static void __init ixdp2351_init(void)
-{
- platform_device_register(&ixdp2351_flash);
-
- /*
- * Mark flash as writeable
- */
- IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
- ixp23xx_sys_init();
-}
-
-static void ixdp2351_restart(char mode, const char *cmd)
-{
- /* First try machine specific support */
-
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
- (void) *IXDP2351_CPLD_RESET1_REG;
- *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
-
- ixp23xx_restart(mode, cmd);
-}
-
-MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
- /* Maintainer: MontaVista Software, Inc. */
- .map_io = ixdp2351_map_io,
- .init_irq = ixdp2351_init_irq,
- .timer = &ixp23xx_timer,
- .atag_offset = 0x100,
- .init_machine = ixdp2351_init,
- .restart = ixdp2351_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/pci.c
- *
- * PCI routines for IXP23XX based systems
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * based on original code:
- *
- * Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Copyright 2002-2005 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-extern int (*external_fault) (unsigned long, struct pt_regs *);
-
-static volatile int pci_master_aborts = 0;
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int clear_master_aborts(void);
-
-static u32
-*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
- u32 *paddress;
-
- /*
- * Must be dword aligned
- */
- where &= ~3;
-
- /*
- * For top bus, generate type 0, else type 1
- */
- if (!bus_nr) {
- if (PCI_SLOT(devfn) >= 8)
- return 0;
-
- paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
- | (1 << (PCI_SLOT(devfn) + 16))
- | (PCI_FUNC(devfn) << 8) | where);
- } else {
- paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
- | (bus_nr << 16)
- | (PCI_SLOT(devfn) << 11)
- | (PCI_FUNC(devfn) << 8) | where);
- }
-
- return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
- /*0*/ 0,
- /*1*/ 0xff,
- /*2*/ 0xffff,
- /*3*/ 0,
- /*4*/ 0xffffffff,
-};
-
-static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *value)
-{
- u32 n;
- u32 *addr;
-
- n = where % 4;
-
- DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
- bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
- addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- pci_master_aborts = 0;
- *value = (*addr >> (8*n)) & bytemask[size];
- if (pci_master_aborts) {
- pci_master_aborts = 0;
- *value = 0xffffffff;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checking on the address for writes.
- * It's assumed that the user checked for the device existing first
- * by doing a read first.
- */
-static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 value)
-{
- u32 mask;
- u32 *addr;
- u32 temp;
-
- mask = ~(bytemask[size] << ((where % 0x4) * 8));
- addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
- temp = (u32) (value) << ((where % 0x4) * 8);
- *addr = (*addr & mask) | temp;
-
- clear_master_aborts();
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp23xx_pci_ops = {
- .read = ixp23xx_pci_read_config,
- .write = ixp23xx_pci_write_config,
-};
-
-struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
-{
- return pci_scan_root_bus(NULL, sysdata->busnr, &ixp23xx_pci_ops,
- sysdata, &sysdata->resources);
-}
-
-int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
- volatile unsigned long temp;
- unsigned long flags;
-
- pci_master_aborts = 1;
-
- local_irq_save(flags);
- temp = *IXP23XX_PCI_CONTROL;
-
- /*
- * master abort and cmd tgt err
- */
- if (temp & ((1 << 8) | (1 << 5)))
- *IXP23XX_PCI_CONTROL = temp;
-
- temp = *IXP23XX_PCI_CMDSTAT;
-
- if (temp & (1 << 29))
- *IXP23XX_PCI_CMDSTAT = temp;
- local_irq_restore(flags);
-
- /*
- * If it was an imprecise abort, then we need to correct the
- * return address to be _after_ the instruction.
- */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-
- return 0;
-}
-
-int clear_master_aborts(void)
-{
- volatile u32 temp;
-
- temp = *IXP23XX_PCI_CONTROL;
-
- /*
- * master abort and cmd tgt err
- */
- if (temp & ((1 << 8) | (1 << 5)))
- *IXP23XX_PCI_CONTROL = temp;
-
- temp = *IXP23XX_PCI_CMDSTAT;
-
- if (temp & (1 << 29))
- *IXP23XX_PCI_CMDSTAT = temp;
-
- return 0;
-}
-
-static void __init ixp23xx_pci_common_init(void)
-{
-#ifdef __ARMEB__
- *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */
-#endif
- /*
- * ADDR_31 needs to be clear for PCI memory access to CPP memory
- */
- *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
- *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
-
- /*
- * Select correct memory for PCI inbound transactions
- */
- if (ixp23xx_cpp_boot()) {
- *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
- } else {
- *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
-
- /*
- * Enable coherency on A2 silicon.
- */
- if (arch_is_coherent())
- *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
- }
-}
-
-void __init ixp23xx_pci_preinit(void)
-{
- pcibios_min_io = 0;
- pcibios_min_mem = 0xe0000000;
-
- pci_set_flags(0);
-
- ixp23xx_pci_common_init();
-
- hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
- "PCI config cycle to non-existent device");
-
- *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
-}
-
-/*
- * Prevent PCI layer from seeing the inbound host-bridge resources
- */
-static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
-{
- int i;
-
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
-
-/*
- * IXP2300 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp23xx_pci_mem_space = {
- .start = IXP23XX_PCI_MEM_START,
- .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- .name = "PCI Mem Space"
-};
-
-static struct resource ixp23xx_pci_io_space = {
- .start = 0x00000100,
- .end = 0x01ffffff,
- .flags = IORESOURCE_IO,
- .name = "PCI I/O Space"
-};
-
-int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
-{
- if (nr >= 1)
- return 0;
-
- pci_add_resource_offset(&sys->resources,
- &ixp23xx_pci_io_space, sys->io_offset);
- pci_add_resource_offset(&sys->resources,
- &ixp23xx_pci_mem_space, sys->mem_offset);
-
- return 1;
-}
-
-void __init ixp23xx_pci_slave_init(void)
-{
- ixp23xx_pci_common_init();
-}
+++ /dev/null
-/*
- * arch/arm/mach-ixp23xx/roadrunner.c
- *
- * RoadRunner board-specific routines
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2005 (c) MontaVista Software, Inc.
- *
- * Based on 2.4 code Copyright 2005 (c) ADI Engineering Corporation
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/ioport.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-
-/*
- * Interrupt mapping
- */
-#define INTA IRQ_ROADRUNNER_PCI_INTA
-#define INTB IRQ_ROADRUNNER_PCI_INTB
-#define INTC IRQ_ROADRUNNER_PCI_INTC
-#define INTD IRQ_ROADRUNNER_PCI_INTD
-
-#define INTC_PIN IXP23XX_GPIO_PIN_11
-#define INTD_PIN IXP23XX_GPIO_PIN_12
-
-static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel,
- u8 pin)
-{
- static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA};
- static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD};
- static int usb_irq[] = {INTB, INTC, INTD, -1};
- static int mini_pci_1_irq[] = {INTB, INTC, -1, -1};
- static int mini_pci_2_irq[] = {INTC, INTD, -1, -1};
-
- switch(dev->bus->number) {
- case 0:
- switch(dev->devfn) {
- case 0x0: // PCI-PCI bridge
- break;
- case 0x8: // PCI Card Slot
- return pci_card_slot_irq[pin - 1];
- case 0x10: // PMC Slot
- return pmc_card_slot_irq[pin - 1];
- case 0x18: // PMC Slot Secondary Agent
- break;
- case 0x20: // IXP Processor
- break;
- default:
- return NO_IRQ;
- }
- break;
-
- case 1:
- switch(dev->devfn) {
- case 0x0: // IDE Controller
- return (pin == 1) ? INTC : -1;
- case 0x8: // USB fun 0
- case 0x9: // USB fun 1
- case 0xa: // USB fun 2
- return usb_irq[pin - 1];
- case 0x10: // Mini PCI 1
- return mini_pci_1_irq[pin-1];
- case 0x18: // Mini PCI 2
- return mini_pci_2_irq[pin-1];
- case 0x20: // MEM slot
- return (pin == 1) ? INTA : -1;
- default:
- return NO_IRQ;
- }
- break;
-
- default:
- return NO_IRQ;
- }
-
- return NO_IRQ;
-}
-
-static void __init roadrunner_pci_preinit(void)
-{
- irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
- irq_set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
- ixp23xx_pci_preinit();
-}
-
-static struct hw_pci roadrunner_pci __initdata = {
- .nr_controllers = 1,
- .preinit = roadrunner_pci_preinit,
- .setup = ixp23xx_pci_setup,
- .scan = ixp23xx_pci_scan_bus,
- .map_irq = roadrunner_map_irq,
-};
-
-static int __init roadrunner_pci_init(void)
-{
- if (machine_is_roadrunner())
- pci_common_init(&roadrunner_pci);
-
- return 0;
-};
-
-subsys_initcall(roadrunner_pci_init);
-
-static struct physmap_flash_data roadrunner_flash_data = {
- .width = 2,
-};
-
-static struct resource roadrunner_flash_resource = {
- .start = 0x90000000,
- .end = 0x93ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device roadrunner_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &roadrunner_flash_data,
- },
- .num_resources = 1,
- .resource = &roadrunner_flash_resource,
-};
-
-static void __init roadrunner_init(void)
-{
- platform_device_register(&roadrunner_flash);
-
- /*
- * Mark flash as writeable
- */
- IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE;
- IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE;
-
- ixp23xx_sys_init();
-}
-
-MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
- /* Maintainer: Deepak Saxena */
- .map_io = ixp23xx_map_io,
- .init_irq = ixp23xx_init_irq,
- .timer = &ixp23xx_timer,
- .atag_offset = 0x100,
- .init_machine = roadrunner_init,
- .restart = ixp23xx_restart,
-MACHINE_END
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
obj-y += $(usb-fs-m) $(usb-fs-y)
# Specific board support
-obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o
+obj-$(CONFIG_MACH_OMAP_H2) += board-h2.o board-h2-mmc.o \
+ board-nand.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR) += board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
-obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o
-obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2) += board-perseus2.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE) += board-fsample.o board-nand.o
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
-obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o
+obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
+ board-nand.o
obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
}
retval = request_irq(INT_DEFERRED_FIQ, deferred_fiq,
- IRQ_TYPE_EDGE_RISING, "deferred_fiq", 0);
+ IRQ_TYPE_EDGE_RISING, "deferred_fiq", NULL);
if (retval < 0) {
pr_err("Failed to get deferred_fiq IRQ, ret=%d\n", retval);
release_fiq(&fh);
.resource = &nor_resource,
};
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
#define FSAMPLE_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct mtd_info *mtd)
.part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
},
};
-static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
#define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct mtd_info *mtd)
.part_probe_types = h2_part_probes,
},
.ctrl = {
- .cmd_ctrl = h2_nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = h2_nand_dev_ready,
-
},
};
},
};
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
#define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct mtd_info *mtd)
.part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap1/board-nand.c
+ *
+ * Common OMAP1 board NAND code
+ *
+ * Copyright (C) 2004, 2012 Texas Instruments, Inc.
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+#include "common.h"
+
+void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long mask;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+ if (ctrl & NAND_ALE)
+ mask |= 0x04;
+
+ writeb(cmd, this->IO_ADDR_W + mask);
+}
+
gpio_direction_input(PALMZ71_USBDETECT_GPIO);
if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO),
palmz71_powercable, IRQF_SAMPLE_RANDOM,
- "palmz71-cable", 0))
+ "palmz71-cable", NULL))
printk(KERN_ERR
"IRQ request for power cable failed!\n");
- palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), 0);
+ palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL);
}
}
.resource = &nor_resource,
};
-static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *this = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
-}
-
#define P2_NAND_RB_GPIO_PIN 62
static int nand_dev_ready(struct mtd_info *mtd)
.part_probe_types = part_probes,
},
.ctrl = {
- .cmd_ctrl = nand_cmd_ctl,
+ .cmd_ctrl = omap1_nand_cmd_ctl,
.dev_ready = nand_dev_ready,
},
};
{
/* Find the highest supported frequency <= rate and switch to it */
struct mpu_rate * ptr;
- unsigned long dpll1_rate, ref_rate;
+ unsigned long ref_rate;
- dpll1_rate = ck_dpll1_p->rate;
ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
#include <plat/common.h>
+#include <linux/mtd/mtd.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
void omap1_init_irq(void);
void omap1_restart(char, const char *);
+extern void __init omap_check_revision(void);
+
+extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl);
+
extern struct sys_timer omap1_timer;
extern bool omap_32k_timer_init(void);
-extern void __init omap_init_consistent_dma_size(void);
+
+extern u32 omap_irq_flags;
+
+extern int ocpi_enable(void);
#endif /* __ARCH_ARM_MACH_OMAP1_COMMON_H */
fpga_ack_irq(d);
}
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
+static void innovator_fpga_IRQ_demux(unsigned int irq, struct irq_desc *desc)
{
u32 stat;
int fpga_irq;
#include <mach/hardware.h>
+#include "common.h"
+
#define OMAP_DIE_ID_0 0xfffe1800
#define OMAP_DIE_ID_1 0xfffe1804
#define OMAP_PRODUCTION_ID_0 0xfffe2000
#include <plat/mux.h>
#include <plat/tc.h>
+#include <plat/dma.h>
#include "iomap.h"
#include "common.h"
#include "clock.h"
-extern void omap_check_revision(void);
-
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
#include <mach/hardware.h>
+#include "common.h"
+
#define IRQ_BANK(irq) ((irq) >> 5)
#define IRQ_BIT(irq) ((irq) & 0x1f)
void *cb_data;
int active;
- unsigned long addr, size;
+ unsigned long addr;
int rotate, data_type, xres, yres;
int vxres;
int mirror;
}
EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-void omap_set_lcd_dma_src_port(int port)
-{
- lcd_dma.src_port = port;
-}
-
void omap_set_lcd_dma_ext_controller(int external)
{
lcd_dma.ext_ctrl = external;
--- /dev/null
+/*
+ * linux/arch/arm/plat-omap/ocpi.c
+ *
+ * Minimal OCP bus support for omap16xx
+ *
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "common.h"
+
+#define OCPI_BASE 0xfffec320
+#define OCPI_FAULT (OCPI_BASE + 0x00)
+#define OCPI_CMD_FAULT (OCPI_BASE + 0x04)
+#define OCPI_SINT0 (OCPI_BASE + 0x08)
+#define OCPI_TABORT (OCPI_BASE + 0x0c)
+#define OCPI_SINT1 (OCPI_BASE + 0x10)
+#define OCPI_PROT (OCPI_BASE + 0x14)
+#define OCPI_SEC (OCPI_BASE + 0x18)
+
+/* USB OHCI OCPI access error registers */
+#define HOSTUEADDR 0xfffba0e0
+#define HOSTUESTATUS 0xfffba0e4
+
+static struct clk *ocpi_ck;
+
+/*
+ * Enables device access to OMAP buses via the OCPI bridge
+ * FIXME: Add locking
+ */
+int ocpi_enable(void)
+{
+ unsigned int val;
+
+ if (!cpu_is_omap16xx())
+ return -ENODEV;
+
+ /* Enable access for OHCI in OCPI */
+ val = omap_readl(OCPI_PROT);
+ val &= ~0xff;
+ /* val &= (1 << 0); Allow access only to EMIFS */
+ omap_writel(val, OCPI_PROT);
+
+ val = omap_readl(OCPI_SEC);
+ val &= ~0xff;
+ omap_writel(val, OCPI_SEC);
+
+ return 0;
+}
+EXPORT_SYMBOL(ocpi_enable);
+
+static int __init omap_ocpi_init(void)
+{
+ if (!cpu_is_omap16xx())
+ return -ENODEV;
+
+ ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
+ if (IS_ERR(ocpi_ck))
+ return PTR_ERR(ocpi_ck);
+
+ clk_enable(ocpi_ck);
+ ocpi_enable();
+ pr_info("OMAP OCPI interconnect driver loaded\n");
+
+ return 0;
+}
+
+static void __exit omap_ocpi_exit(void)
+{
+ /* REVISIT: Disable OCPI */
+
+ if (!cpu_is_omap16xx())
+ return;
+
+ clk_disable(ocpi_ck);
+ clk_put(ocpi_ck);
+}
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("OMAP OCPI bus controller module");
+MODULE_LICENSE("GPL");
+module_init(omap_ocpi_init);
+module_exit(omap_ocpi_exit);
static void omap_pm_init_proc(void)
{
- struct proc_dir_entry *entry;
-
- entry = create_proc_read_entry("driver/omap_pm",
- S_IWUSR | S_IRUGO, NULL,
- omap_pm_read_proc, NULL);
+ /* XXX Appears to leak memory */
+ create_proc_read_entry("driver/omap_pm",
+ S_IWUSR | S_IRUGO, NULL,
+ omap_pm_read_proc, NULL);
}
#endif /* DEBUG && CONFIG_PROC_FS */
#include <mach/hardware.h>
+#include "common.h"
+
void omap1_restart(char mode, const char *cmd)
{
/*
return 0;
}
-
-int __init omap1_dm_timer_init(void)
+static int __init omap1_dm_timer_init(void)
{
int i;
int ret;
#include <plat/mux.h>
#include <plat/usb.h>
+#include "common.h"
+
/* These routines should handle the standard chip-specific modes
* for usb0/1/2 ports, covering basic mux and transceiver setup.
*
if (cpu_is_omap7xx())
ohci_resources[1].start = INT_7XX_USB_HHC_1;
pdata->ohci_device = &ohci_device;
+ pdata->ocpi_enable = &ocpi_enable;
}
#else
static void am35xx_enable_emac_int(void)
{
- u32 regval;
-
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
- AM35XX_CPGMAC_C0_TX_PULSE_CLR |
- AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
- AM35XX_CPGMAC_C0_RX_THRESH_CLR);
- omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ u32 v;
+
+ v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+ omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static void am35xx_disable_emac_int(void)
{
- u32 regval;
+ u32 v;
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
- AM35XX_CPGMAC_C0_TX_PULSE_CLR);
- omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
- regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+ omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static struct emac_platform_data am35xx_emac_pdata = {
void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
{
- unsigned int regval;
+ u32 v;
int err;
am35xx_emac_pdata.rmii_en = rmii_en;
return;
}
- regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
- regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
- omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
- regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+ v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+ v &= ~AM35XX_CPGMACSS_SW_RST;
+ omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
+ omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
static void __init omap3_evm_init(void)
{
+ struct omap_board_mux *obm;
+
omap3_evm_get_revision();
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
- if (cpu_is_omap3630())
- omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
- else
- omap3_mux_init(omap35x_board_mux, OMAP_PACKAGE_CBB);
+ obm = (cpu_is_omap3630()) ? omap36x_board_mux : omap35x_board_mux;
+ omap3_mux_init(obm, OMAP_PACKAGE_CBB);
omap_board_config = omap3_evm_config;
omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
},
};
-struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
+static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
.i2c_bus_num = 3,
};
-struct omap_dss_device omap4_panda_dvi_device = {
+static struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "dvi",
.channel = OMAP_DSS_CHANNEL_LCD2,
};
-int __init omap4_panda_dvi_init(void)
+static int __init omap4_panda_dvi_init(void)
{
int r;
.default_device = &omap4_panda_dvi_device,
};
-void __init omap4_panda_display_init(void)
+static void __init omap4_panda_display_init(void)
{
int r;
.resource_config = twl4030_rconfig,
};
-struct twl4030_vibra_data rx51_vibra_data __initdata = {
+static struct twl4030_vibra_data rx51_vibra_data __initdata = {
.coexist = 0,
};
-struct twl4030_audio_data rx51_audio_data __initdata = {
+static struct twl4030_audio_data rx51_audio_data __initdata = {
.audio_mclk = 26000000,
.vibra = &rx51_vibra_data,
};
#include <linux/spi/spi.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
+#include <mach/board-zoom.h>
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
void ti81xx_map_io(void);
void omap_barriers_init(void);
-extern void __init omap_init_consistent_dma_size(void);
-
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
static int __init omap3_l3_init(void)
{
- int l;
struct omap_hwmod *oh;
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
if (!(cpu_is_omap34xx()))
return -ENODEV;
- l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
+ snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
oh = omap_hwmod_lookup(oh_name);
static int __init omap4_l3_init(void)
{
- int l, i;
+ int i;
struct omap_hwmod *oh[3];
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
return -ENODEV;
for (i = 0; i < L3_MODULES; i++) {
- l = snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
+ snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
oh[i] = omap_hwmod_lookup(oh_name);
if (!(oh[i]))
pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
- if (!pdata) {
+ if (!pdata->regs) {
pr_err("gpio%d: Memory allocation failed\n", id);
return -ENOMEM;
}
const int t_wpl = 40;
const int t_wph = 30;
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
- int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
int err, ticks_cez;
int cs = cfg->cs, freq = *freq_ptr;
break;
}
- tick_ns = gpmc_ticks_to_ns(1);
div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
gpmc_clk_ns = gpmc_ticks_to_ns(div);
if (gpmc_clk_ns < 15) /* >66Mhz */
irq++;
}
- ret = request_irq(gpmc_irq,
- gpmc_handle_irq, IRQF_SHARED, "gpmc", gpmc_base);
+ ret = request_irq(gpmc_irq, gpmc_handle_irq, IRQF_SHARED, "gpmc", NULL);
if (ret)
pr_err("gpmc: irq-%d could not claim: err %d\n",
gpmc_irq, ret);
.base_id = 0,
};
-int __init hwspinlocks_init(void)
+static int __init hwspinlocks_init(void)
{
int retval = 0;
struct omap_hwmod *oh;
#include <plat/omap-pm.h>
#include <plat/omap_hwmod.h>
#include <plat/multi.h>
+#include <plat/dma.h>
#include "iomap.h"
#include "voltage.h"
#include <mach/hardware.h>
#include "iomap.h"
+#include "common.h"
/* selected INTC register offsets */
void omap3_intc_suspend(void)
{
/* A pending interrupt would prevent OMAP from entering suspend */
- omap_ack_irq(0);
+ omap_ack_irq(NULL);
}
void omap3_intc_prepare_idle(void)
int mux_mode;
mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
- if (mux_mode < 0)
+ if (mux_mode < 0 || !mux)
return mux_mode;
old_mode = omap_mux_read(partition, mux->reg_offset);
#include <asm/cacheflush.h>
#include <asm/memblock.h>
+#include <plat/omap-secure.h>
#include <mach/omap-secure.h>
static phys_addr_t omap_secure_memblock_base;
/*
* Clear WakeupGen SAR backup status.
*/
-void irq_sar_clear(void)
+static void irq_sar_clear(void)
{
u32 val;
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
* omap_hwmod implementation for OMAP2/3/4
*
* Copyright (C) 2009-2011 Nokia Corporation
- * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011-2012 Texas Instruments, Inc.
*
* Paul Walmsley, Benoît Cousson, Kevin Hilman
*
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
+#include <linux/bootmem.h>
#include "common.h"
#include <plat/cpu.h>
/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME "mpu"
+/*
+ * Number of struct omap_hwmod_link records per struct
+ * omap_hwmod_ocp_if record (master->slave and slave->master)
+ */
+#define LINKS_PER_OCP_IF 2
+
/* omap_hwmod_list contains all registered struct omap_hwmods */
static LIST_HEAD(omap_hwmod_list);
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;
+/*
+ * linkspace: ptr to a buffer that struct omap_hwmod_link records are
+ * allocated from - used to reduce the number of small memory
+ * allocations, which has a significant impact on performance
+ */
+static struct omap_hwmod_link *linkspace;
+
+/*
+ * free_ls, max_ls: array indexes into linkspace; representing the
+ * next free struct omap_hwmod_link index, and the maximum number of
+ * struct omap_hwmod_link records allocated (respectively)
+ */
+static unsigned short free_ls, max_ls, ls_supp;
/* Private functions */
+/**
+ * _fetch_next_ocp_if - return the next OCP interface in a list
+ * @p: ptr to a ptr to the list_head inside the ocp_if to return
+ * @i: pointer to the index of the element pointed to by @p in the list
+ *
+ * Return a pointer to the struct omap_hwmod_ocp_if record
+ * containing the struct list_head pointed to by @p, and increment
+ * @p such that a future call to this routine will return the next
+ * record.
+ */
+static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
+ int *i)
+{
+ struct omap_hwmod_ocp_if *oi;
+
+ oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
+ *p = (*p)->next;
+
+ *i = *i + 1;
+
+ return oi;
+}
+
/**
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
* @oh: struct omap_hwmod *
*/
static int _init_interface_clks(struct omap_hwmod *oh)
{
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
struct clk *c;
- int i;
+ int i = 0;
int ret = 0;
- if (oh->slaves_cnt == 0)
- return 0;
-
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os = oh->slaves[i];
+ p = oh->slave_ports.next;
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
if (!os->clk)
continue;
*/
static int _enable_clocks(struct omap_hwmod *oh)
{
- int i;
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
+ int i = 0;
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
if (oh->_clk)
clk_enable(oh->_clk);
- if (oh->slaves_cnt > 0) {
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os = oh->slaves[i];
- struct clk *c = os->_clk;
+ p = oh->slave_ports.next;
- if (c && (os->flags & OCPIF_SWSUP_IDLE))
- clk_enable(c);
- }
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+
+ if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+ clk_enable(os->_clk);
}
/* The opt clocks are controlled by the device driver. */
*/
static int _disable_clocks(struct omap_hwmod *oh)
{
- int i;
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
+ int i = 0;
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
if (oh->_clk)
clk_disable(oh->_clk);
- if (oh->slaves_cnt > 0) {
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os = oh->slaves[i];
- struct clk *c = os->_clk;
+ p = oh->slave_ports.next;
- if (c && (os->flags & OCPIF_SWSUP_IDLE))
- clk_disable(c);
- }
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+
+ if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
+ clk_disable(os->_clk);
}
/* The opt clocks are controlled by the device driver. */
oh->prcm.omap4.clkctrl_offs);
}
-/**
- * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _omap4_disable_module(struct omap_hwmod *oh)
-{
- int v;
-
- /* The module mode does not exist prior OMAP4 */
- if (!cpu_is_omap44xx())
- return -EINVAL;
-
- if (!oh->clkdm || !oh->prcm.omap4.modulemode)
- return -EINVAL;
-
- pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
- omap4_cminst_module_disable(oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
-
- v = _omap4_wait_target_disable(oh);
- if (v)
- pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
- oh->name);
-
- return 0;
-}
-
/**
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
* @oh: struct omap_hwmod *oh
}
/**
- * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
- * @oh: struct omap_hwmod *
+ * _get_mpu_irq_by_name - fetch MPU interrupt line number by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the MPU interrupt number to fetch (optional)
+ * @irq: pointer to an unsigned int to store the MPU IRQ number to
*
- * Returns the array index of the OCP slave port that the MPU
- * addresses the device on, or -EINVAL upon error or not found.
+ * Retrieve a MPU hardware IRQ line number named by @name associated
+ * with the IP block pointed to by @oh. The IRQ number will be filled
+ * into the address pointed to by @dma. When @name is non-null, the
+ * IRQ line number associated with the named entry will be returned.
+ * If @name is null, the first matching entry will be returned. Data
+ * order is not meaningful in hwmod data, so callers are strongly
+ * encouraged to use a non-null @name whenever possible to avoid
+ * unpredictable effects if hwmod data is later added that causes data
+ * ordering to change. Returns 0 upon success or a negative error
+ * code upon error.
*/
-static int __init _find_mpu_port_index(struct omap_hwmod *oh)
+static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name,
+ unsigned int *irq)
{
int i;
- int found = 0;
+ bool found = false;
- if (!oh || oh->slaves_cnt == 0)
- return -EINVAL;
+ if (!oh->mpu_irqs)
+ return -ENOENT;
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os = oh->slaves[i];
+ i = 0;
+ while (oh->mpu_irqs[i].irq != -1) {
+ if (name == oh->mpu_irqs[i].name ||
+ !strcmp(name, oh->mpu_irqs[i].name)) {
+ found = true;
+ break;
+ }
+ i++;
+ }
- if (os->user & OCP_USER_MPU) {
- found = 1;
+ if (!found)
+ return -ENOENT;
+
+ *irq = oh->mpu_irqs[i].irq;
+
+ return 0;
+}
+
+/**
+ * _get_sdma_req_by_name - fetch SDMA request line ID by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the SDMA request line to fetch (optional)
+ * @dma: pointer to an unsigned int to store the request line ID to
+ *
+ * Retrieve an SDMA request line ID named by @name on the IP block
+ * pointed to by @oh. The ID will be filled into the address pointed
+ * to by @dma. When @name is non-null, the request line ID associated
+ * with the named entry will be returned. If @name is null, the first
+ * matching entry will be returned. Data order is not meaningful in
+ * hwmod data, so callers are strongly encouraged to use a non-null
+ * @name whenever possible to avoid unpredictable effects if hwmod
+ * data is later added that causes data ordering to change. Returns 0
+ * upon success or a negative error code upon error.
+ */
+static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
+ unsigned int *dma)
+{
+ int i;
+ bool found = false;
+
+ if (!oh->sdma_reqs)
+ return -ENOENT;
+
+ i = 0;
+ while (oh->sdma_reqs[i].dma_req != -1) {
+ if (name == oh->sdma_reqs[i].name ||
+ !strcmp(name, oh->sdma_reqs[i].name)) {
+ found = true;
break;
}
+ i++;
}
- if (found)
- pr_debug("omap_hwmod: %s: MPU OCP slave port ID %d\n",
- oh->name, i);
- else
- pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n",
- oh->name);
+ if (!found)
+ return -ENOENT;
+
+ *dma = oh->sdma_reqs[i].dma_req;
- return (found) ? i : -EINVAL;
+ return 0;
}
/**
- * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU
- * @oh: struct omap_hwmod *
+ * _get_addr_space_by_name - fetch address space start & end by name
+ * @oh: struct omap_hwmod * to operate on
+ * @name: pointer to the name of the address space to fetch (optional)
+ * @pa_start: pointer to a u32 to store the starting address to
+ * @pa_end: pointer to a u32 to store the ending address to
*
- * Return the virtual address of the base of the register target of
- * device @oh, or NULL on error.
+ * Retrieve address space start and end addresses for the IP block
+ * pointed to by @oh. The data will be filled into the addresses
+ * pointed to by @pa_start and @pa_end. When @name is non-null, the
+ * address space data associated with the named entry will be
+ * returned. If @name is null, the first matching entry will be
+ * returned. Data order is not meaningful in hwmod data, so callers
+ * are strongly encouraged to use a non-null @name whenever possible
+ * to avoid unpredictable effects if hwmod data is later added that
+ * causes data ordering to change. Returns 0 upon success or a
+ * negative error code upon error.
*/
-static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
+ u32 *pa_start, u32 *pa_end)
{
+ int i, j;
struct omap_hwmod_ocp_if *os;
- struct omap_hwmod_addr_space *mem;
- int i = 0, found = 0;
- void __iomem *va_start;
+ struct list_head *p = NULL;
+ bool found = false;
+
+ p = oh->slave_ports.next;
+
+ i = 0;
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+
+ if (!os->addr)
+ return -ENOENT;
+
+ j = 0;
+ while (os->addr[j].pa_start != os->addr[j].pa_end) {
+ if (name == os->addr[j].name ||
+ !strcmp(name, os->addr[j].name)) {
+ found = true;
+ break;
+ }
+ j++;
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found)
+ return -ENOENT;
+
+ *pa_start = os->addr[j].pa_start;
+ *pa_end = os->addr[j].pa_end;
+
+ return 0;
+}
+
+/**
+ * _save_mpu_port_index - find and save the index to @oh's MPU port
+ * @oh: struct omap_hwmod *
+ *
+ * Determines the array index of the OCP slave port that the MPU uses
+ * to address the device, and saves it into the struct omap_hwmod.
+ * Intended to be called during hwmod registration only. No return
+ * value.
+ */
+static void __init _save_mpu_port_index(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_ocp_if *os = NULL;
+ struct list_head *p;
+ int i = 0;
+
+ if (!oh)
+ return;
- if (!oh || oh->slaves_cnt == 0)
+ oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+
+ p = oh->slave_ports.next;
+
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+ if (os->user & OCP_USER_MPU) {
+ oh->_mpu_port = os;
+ oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
+ break;
+ }
+ }
+
+ return;
+}
+
+/**
+ * _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU
+ * @oh: struct omap_hwmod *
+ *
+ * Given a pointer to a struct omap_hwmod record @oh, return a pointer
+ * to the struct omap_hwmod_ocp_if record that is used by the MPU to
+ * communicate with the IP block. This interface need not be directly
+ * connected to the MPU (and almost certainly is not), but is directly
+ * connected to the IP block represented by @oh. Returns a pointer
+ * to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon
+ * error or if there does not appear to be a path from the MPU to this
+ * IP block.
+ */
+static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh)
+{
+ if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0)
return NULL;
- os = oh->slaves[index];
+ return oh->_mpu_port;
+};
+
+/**
+ * _find_mpu_rt_addr_space - return MPU register target address space for @oh
+ * @oh: struct omap_hwmod *
+ *
+ * Returns a pointer to the struct omap_hwmod_addr_space record representing
+ * the register target MPU address space; or returns NULL upon error.
+ */
+static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_ocp_if *os;
+ struct omap_hwmod_addr_space *mem;
+ int found = 0, i = 0;
- if (!os->addr)
+ os = _find_mpu_rt_port(oh);
+ if (!os || !os->addr)
return NULL;
do {
found = 1;
} while (!found && mem->pa_start != mem->pa_end);
- if (found) {
- va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
- if (!va_start) {
- pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
- return NULL;
- }
- pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
- oh->name, va_start);
- } else {
- pr_debug("omap_hwmod: %s: no MPU register target found\n",
- oh->name);
- }
-
- return (found) ? va_start : NULL;
+ return (found) ? mem : NULL;
}
/**
if (!oh)
return -EINVAL;
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ if (oh->flags & HWMOD_NO_IDLEST)
return 0;
- os = oh->slaves[oh->_mpu_port_index];
-
- if (oh->flags & HWMOD_NO_IDLEST)
+ os = _find_mpu_rt_port(oh);
+ if (!os)
return 0;
/* XXX check module SIDLEMODE */
}
}
+/**
+ * _are_any_hardreset_lines_asserted - return true if part of @oh is hard-reset
+ * @oh: struct omap_hwmod *
+ *
+ * If any hardreset line associated with @oh is asserted, then return true.
+ * Otherwise, if @oh has no hardreset lines associated with it, or if
+ * no hardreset lines associated with @oh are asserted, then return false.
+ * This function is used to avoid executing some parts of the IP block
+ * enable/disable sequence if a hardreset line is set.
+ */
+static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
+{
+ int i;
+
+ if (oh->rst_lines_cnt == 0)
+ return false;
+
+ for (i = 0; i < oh->rst_lines_cnt; i++)
+ if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
+ return true;
+
+ return false;
+}
+
+/**
+ * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
+ * @oh: struct omap_hwmod *
+ *
+ * Disable the PRCM module mode related to the hwmod @oh.
+ * Return EINVAL if the modulemode is not supported and 0 in case of success.
+ */
+static int _omap4_disable_module(struct omap_hwmod *oh)
+{
+ int v;
+
+ /* The module mode does not exist prior OMAP4 */
+ if (!cpu_is_omap44xx())
+ return -EINVAL;
+
+ if (!oh->clkdm || !oh->prcm.omap4.modulemode)
+ return -EINVAL;
+
+ pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
+
+ omap4_cminst_module_disable(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->clkdm->clkdm_offs,
+ oh->prcm.omap4.clkctrl_offs);
+
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
+
+ v = _omap4_wait_target_disable(oh);
+ if (v)
+ pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
+ oh->name);
+
+ return 0;
+}
+
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
*
* Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be
- * enabled for this to work. Returns -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
+ * enabled for this to work. Returns -ENOENT if the hwmod cannot be
+ * reset this way, -EINVAL if the hwmod is in the wrong state,
+ * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
*
* In OMAP3 a specific SYSSTATUS register is used to get the reset status.
* Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
if (!oh->class->sysc ||
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
- return -EINVAL;
+ return -ENOENT;
/* clocks must be on for this operation */
if (oh->_state != _HWMOD_STATE_ENABLED) {
* _reset - reset an omap_hwmod
* @oh: struct omap_hwmod *
*
- * Resets an omap_hwmod @oh. The default software reset mechanism for
- * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET
- * bit. However, some hwmods cannot be reset via this method: some
- * are not targets and therefore have no OCP header registers to
- * access; others (like the IVA) have idiosyncratic reset sequences.
- * So for these relatively rare cases, custom reset code can be
- * supplied in the struct omap_hwmod_class .reset function pointer.
- * Passes along the return value from either _reset() or the custom
- * reset function - these must return -EINVAL if the hwmod cannot be
- * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
- * the module did not reset in time, or 0 upon success.
+ * Resets an omap_hwmod @oh. If the module has a custom reset
+ * function pointer defined, then call it to reset the IP block, and
+ * pass along its return value to the caller. Otherwise, if the IP
+ * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield
+ * associated with it, call a function to reset the IP block via that
+ * method, and pass along the return value to the caller. Finally, if
+ * the IP block has some hardreset lines associated with it, assert
+ * all of those, but do _not_ deassert them. (This is because driver
+ * authors have expressed an apparent requirement to control the
+ * deassertion of the hardreset lines themselves.)
+ *
+ * The default software reset mechanism for most OMAP IP blocks is
+ * triggered via the OCP_SYSCONFIG.SOFTRESET bit. However, some
+ * hwmods cannot be reset via this method. Some are not targets and
+ * therefore have no OCP header registers to access. Others (like the
+ * IVA) have idiosyncratic reset sequences. So for these relatively
+ * rare cases, custom reset code can be supplied in the struct
+ * omap_hwmod_class .reset function pointer. Passes along the return
+ * value from either _ocp_softreset() or the custom reset function -
+ * these must return -EINVAL if the hwmod cannot be reset this way or
+ * if the hwmod is in the wrong state, -ETIMEDOUT if the module did
+ * not reset in time, or 0 upon success.
*/
static int _reset(struct omap_hwmod *oh)
{
- int ret;
+ int i, r;
pr_debug("omap_hwmod: %s: resetting\n", oh->name);
- ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
+ if (oh->class->reset) {
+ r = oh->class->reset(oh);
+ } else {
+ if (oh->rst_lines_cnt > 0) {
+ for (i = 0; i < oh->rst_lines_cnt; i++)
+ _assert_hardreset(oh, oh->rst_lines[i].name);
+ return 0;
+ } else {
+ r = _ocp_softreset(oh);
+ if (r == -ENOENT)
+ r = 0;
+ }
+ }
+ /*
+ * OCP_SYSCONFIG bits need to be reprogrammed after a
+ * softreset. The _enable() function should be split to avoid
+ * the rewrite of the OCP_SYSCONFIG register.
+ */
if (oh->class->sysc) {
_update_sysc_cache(oh);
_enable_sysc(oh);
}
- return ret;
+ return r;
}
/**
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
/*
- * hwmods with HWMOD_INIT_NO_IDLE flag set are left
- * in enabled state at init.
- * Now that someone is really trying to enable them,
- * just ensure that the hwmod mux is set.
+ * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
+ * state at init. Now that someone is really trying to enable
+ * them, just ensure that the hwmod mux is set.
*/
if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
/*
return -EINVAL;
}
-
/*
- * If an IP contains only one HW reset line, then de-assert it in order
- * to allow the module state transition. Otherwise the PRCM will return
- * Intransition status, and the init will failed.
+ * If an IP block contains HW reset lines and any of them are
+ * asserted, we let integration code associated with that
+ * block handle the enable. We've received very little
+ * information on what those driver authors need, and until
+ * detailed information is provided and the driver code is
+ * posted to the public lists, this is probably the best we
+ * can do.
*/
- if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
- oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
- _deassert_hardreset(oh, oh->rst_lines[0].name);
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
/* Mux pins for device runtime if populated */
if (oh->mux && (!oh->mux->enabled ||
return -EINVAL;
}
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
+
if (oh->class->sysc)
_idle_sysc(oh);
_del_initiator_dep(oh, mpu_oh);
*/
static int _shutdown(struct omap_hwmod *oh)
{
- int ret;
+ int ret, i;
u8 prev_state;
if (oh->_state != _HWMOD_STATE_IDLE &&
return -EINVAL;
}
+ if (_are_any_hardreset_lines_asserted(oh))
+ return 0;
+
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
if (oh->class->pre_shutdown) {
}
/* XXX Should this code also force-disable the optional clocks? */
- /*
- * If an IP contains only one HW reset line, then assert it
- * after disabling the clocks and before shutting down the IP.
- */
- if (oh->rst_lines_cnt == 1)
- _assert_hardreset(oh, oh->rst_lines[0].name);
+ for (i = 0; i < oh->rst_lines_cnt; i++)
+ _assert_hardreset(oh, oh->rst_lines[i].name);
/* Mux pins to safe mode or use populated off mode values */
if (oh->mux)
}
/**
- * _setup - do initial configuration of omap_hwmod
- * @oh: struct omap_hwmod *
+ * _init_mpu_rt_base - populate the virtual address for a hwmod
+ * @oh: struct omap_hwmod * to locate the virtual address
*
- * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register. Returns 0.
+ * Cache the virtual address used by the MPU to access this IP block's
+ * registers. This address is needed early so the OCP registers that
+ * are part of the device's address space can be ioremapped properly.
+ * No return value.
*/
-static int _setup(struct omap_hwmod *oh, void *data)
+static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
{
- int i, r;
- u8 postsetup_state;
+ struct omap_hwmod_addr_space *mem;
+ void __iomem *va_start;
+
+ if (!oh)
+ return;
+
+ _save_mpu_port_index(oh);
- if (oh->_state != _HWMOD_STATE_CLKS_INITED)
+ if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ return;
+
+ mem = _find_mpu_rt_addr_space(oh);
+ if (!mem) {
+ pr_debug("omap_hwmod: %s: no MPU register target found\n",
+ oh->name);
+ return;
+ }
+
+ va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
+ if (!va_start) {
+ pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+ return;
+ }
+
+ pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
+ oh->name, va_start);
+
+ oh->_mpu_rt_va = va_start;
+}
+
+/**
+ * _init - initialize internal data for the hwmod @oh
+ * @oh: struct omap_hwmod *
+ * @n: (unused)
+ *
+ * Look up the clocks and the address space used by the MPU to access
+ * registers belonging to the hwmod @oh. @oh must already be
+ * registered at this point. This is the first of two phases for
+ * hwmod initialization. Code called here does not touch any hardware
+ * registers, it simply prepares internal data structures. Returns 0
+ * upon success or if the hwmod isn't registered, or -EINVAL upon
+ * failure.
+ */
+static int __init _init(struct omap_hwmod *oh, void *data)
+{
+ int r;
+
+ if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
- /* Set iclk autoidle mode */
- if (oh->slaves_cnt > 0) {
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os = oh->slaves[i];
- struct clk *c = os->_clk;
+ _init_mpu_rt_base(oh, NULL);
- if (!c)
- continue;
+ r = _init_clocks(oh, NULL);
+ if (IS_ERR_VALUE(r)) {
+ WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
+ return -EINVAL;
+ }
- if (os->flags & OCPIF_SWSUP_IDLE) {
- /* XXX omap_iclk_deny_idle(c); */
- } else {
- /* XXX omap_iclk_allow_idle(c); */
- clk_enable(c);
- }
+ oh->_state = _HWMOD_STATE_INITIALIZED;
+
+ return 0;
+}
+
+/**
+ * _setup_iclk_autoidle - configure an IP block's interface clocks
+ * @oh: struct omap_hwmod *
+ *
+ * Set up the module's interface clocks. XXX This function is still mostly
+ * a stub; implementing this properly requires iclk autoidle usecounting in
+ * the clock code. No return value.
+ */
+static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
+{
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
+ int i = 0;
+ if (oh->_state != _HWMOD_STATE_INITIALIZED)
+ return;
+
+ p = oh->slave_ports.next;
+
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+ if (!os->_clk)
+ continue;
+
+ if (os->flags & OCPIF_SWSUP_IDLE) {
+ /* XXX omap_iclk_deny_idle(c); */
+ } else {
+ /* XXX omap_iclk_allow_idle(c); */
+ clk_enable(os->_clk);
}
}
- oh->_state = _HWMOD_STATE_INITIALIZED;
+ return;
+}
- /*
- * In the case of hwmod with hardreset that should not be
- * de-assert at boot time, we have to keep the module
- * initialized, because we cannot enable it properly with the
- * reset asserted. Exit without warning because that behavior is
- * expected.
- */
- if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
- return 0;
+/**
+ * _setup_reset - reset an IP block during the setup process
+ * @oh: struct omap_hwmod *
+ *
+ * Reset the IP block corresponding to the hwmod @oh during the setup
+ * process. The IP block is first enabled so it can be successfully
+ * reset. Returns 0 upon success or a negative error code upon
+ * failure.
+ */
+static int __init _setup_reset(struct omap_hwmod *oh)
+{
+ int r;
- r = _enable(oh);
- if (r) {
- pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
- oh->name, oh->_state);
- return 0;
+ if (oh->_state != _HWMOD_STATE_INITIALIZED)
+ return -EINVAL;
+
+ if (oh->rst_lines_cnt == 0) {
+ r = _enable(oh);
+ if (r) {
+ pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+ oh->name, oh->_state);
+ return -EINVAL;
+ }
}
if (!(oh->flags & HWMOD_INIT_NO_RESET))
- _reset(oh);
+ r = _reset(oh);
+
+ return r;
+}
+
+/**
+ * _setup_postsetup - transition to the appropriate state after _setup
+ * @oh: struct omap_hwmod *
+ *
+ * Place an IP block represented by @oh into a "post-setup" state --
+ * either IDLE, ENABLED, or DISABLED. ("post-setup" simply means that
+ * this function is called at the end of _setup().) The postsetup
+ * state for an IP block can be changed by calling
+ * omap_hwmod_enter_postsetup_state() early in the boot process,
+ * before one of the omap_hwmod_setup*() functions are called for the
+ * IP block.
+ *
+ * The IP block stays in this state until a PM runtime-based driver is
+ * loaded for that IP block. A post-setup state of IDLE is
+ * appropriate for almost all IP blocks with runtime PM-enabled
+ * drivers, since those drivers are able to enable the IP block. A
+ * post-setup state of ENABLED is appropriate for kernels with PM
+ * runtime disabled. The DISABLED state is appropriate for unusual IP
+ * blocks such as the MPU WDTIMER on kernels without WDTIMER drivers
+ * included, since the WDTIMER starts running on reset and will reset
+ * the MPU if left active.
+ *
+ * This post-setup mechanism is deprecated. Once all of the OMAP
+ * drivers have been converted to use PM runtime, and all of the IP
+ * block data and interconnect data is available to the hwmod code, it
+ * should be possible to replace this mechanism with a "lazy reset"
+ * arrangement. In a "lazy reset" setup, each IP block is enabled
+ * when the driver first probes, then all remaining IP blocks without
+ * drivers are either shut down or enabled after the drivers have
+ * loaded. However, this cannot take place until the above
+ * preconditions have been met, since otherwise the late reset code
+ * has no way of knowing which IP blocks are in use by drivers, and
+ * which ones are unused.
+ *
+ * No return value.
+ */
+static void __init _setup_postsetup(struct omap_hwmod *oh)
+{
+ u8 postsetup_state;
+
+ if (oh->rst_lines_cnt > 0)
+ return;
postsetup_state = oh->_postsetup_state;
if (postsetup_state == _HWMOD_STATE_UNKNOWN)
WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
oh->name, postsetup_state);
+ return;
+}
+
+/**
+ * _setup - prepare IP block hardware for use
+ * @oh: struct omap_hwmod *
+ * @n: (unused, pass NULL)
+ *
+ * Configure the IP block represented by @oh. This may include
+ * enabling the IP block, resetting it, and placing it into a
+ * post-setup state, depending on the type of IP block and applicable
+ * flags. IP blocks are reset to prevent any previous configuration
+ * by the bootloader or previous operating system from interfering
+ * with power management or other parts of the system. The reset can
+ * be avoided; see omap_hwmod_no_setup_reset(). This is the second of
+ * two phases for hwmod initialization. Code called here generally
+ * affects the IP block hardware, or system integration hardware
+ * associated with the IP block. Returns 0.
+ */
+static int __init _setup(struct omap_hwmod *oh, void *data)
+{
+ if (oh->_state != _HWMOD_STATE_INITIALIZED)
+ return 0;
+
+ _setup_iclk_autoidle(oh);
+
+ if (!_setup_reset(oh))
+ _setup_postsetup(oh);
+
return 0;
}
*/
static int __init _register(struct omap_hwmod *oh)
{
- int ms_id;
-
if (!oh || !oh->name || !oh->class || !oh->class->name ||
(oh->_state != _HWMOD_STATE_UNKNOWN))
return -EINVAL;
if (_lookup(oh->name))
return -EEXIST;
- ms_id = _find_mpu_port_index(oh);
- if (!IS_ERR_VALUE(ms_id))
- oh->_mpu_port_index = ms_id;
- else
- oh->_int_flags |= _HWMOD_NO_MPU_PORT;
-
list_add_tail(&oh->node, &omap_hwmod_list);
+ INIT_LIST_HEAD(&oh->master_ports);
+ INIT_LIST_HEAD(&oh->slave_ports);
spin_lock_init(&oh->_lock);
oh->_state = _HWMOD_STATE_REGISTERED;
return 0;
}
+/**
+ * _alloc_links - return allocated memory for hwmod links
+ * @ml: pointer to a struct omap_hwmod_link * for the master link
+ * @sl: pointer to a struct omap_hwmod_link * for the slave link
+ *
+ * Return pointers to two struct omap_hwmod_link records, via the
+ * addresses pointed to by @ml and @sl. Will first attempt to return
+ * memory allocated as part of a large initial block, but if that has
+ * been exhausted, will allocate memory itself. Since ideally this
+ * second allocation path will never occur, the number of these
+ * 'supplemental' allocations will be logged when debugging is
+ * enabled. Returns 0.
+ */
+static int __init _alloc_links(struct omap_hwmod_link **ml,
+ struct omap_hwmod_link **sl)
+{
+ unsigned int sz;
+
+ if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
+ *ml = &linkspace[free_ls++];
+ *sl = &linkspace[free_ls++];
+ return 0;
+ }
+
+ sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
+
+ *sl = NULL;
+ *ml = alloc_bootmem(sz);
+
+ memset(*ml, 0, sz);
+
+ *sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
+
+ ls_supp++;
+ pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
+ ls_supp * LINKS_PER_OCP_IF);
+
+ return 0;
+};
+
+/**
+ * _add_link - add an interconnect between two IP blocks
+ * @oi: pointer to a struct omap_hwmod_ocp_if record
+ *
+ * Add struct omap_hwmod_link records connecting the master IP block
+ * specified in @oi->master to @oi, and connecting the slave IP block
+ * specified in @oi->slave to @oi. This code is assumed to run before
+ * preemption or SMP has been enabled, thus avoiding the need for
+ * locking in this code. Changes to this assumption will require
+ * additional locking. Returns 0.
+ */
+static int __init _add_link(struct omap_hwmod_ocp_if *oi)
+{
+ struct omap_hwmod_link *ml, *sl;
+
+ pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
+ oi->slave->name);
+
+ _alloc_links(&ml, &sl);
+
+ ml->ocp_if = oi;
+ INIT_LIST_HEAD(&ml->node);
+ list_add(&ml->node, &oi->master->master_ports);
+ oi->master->masters_cnt++;
+
+ sl->ocp_if = oi;
+ INIT_LIST_HEAD(&sl->node);
+ list_add(&sl->node, &oi->slave->slave_ports);
+ oi->slave->slaves_cnt++;
+
+ return 0;
+}
+
+/**
+ * _register_link - register a struct omap_hwmod_ocp_if
+ * @oi: struct omap_hwmod_ocp_if *
+ *
+ * Registers the omap_hwmod_ocp_if record @oi. Returns -EEXIST if it
+ * has already been registered; -EINVAL if @oi is NULL or if the
+ * record pointed to by @oi is missing required fields; or 0 upon
+ * success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init. This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.
+ */
+static int __init _register_link(struct omap_hwmod_ocp_if *oi)
+{
+ if (!oi || !oi->master || !oi->slave || !oi->user)
+ return -EINVAL;
+
+ if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED)
+ return -EEXIST;
+
+ pr_debug("omap_hwmod: registering link from %s to %s\n",
+ oi->master->name, oi->slave->name);
+
+ /*
+ * Register the connected hwmods, if they haven't been
+ * registered already
+ */
+ if (oi->master->_state != _HWMOD_STATE_REGISTERED)
+ _register(oi->master);
+
+ if (oi->slave->_state != _HWMOD_STATE_REGISTERED)
+ _register(oi->slave);
+
+ _add_link(oi);
+
+ oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED;
+
+ return 0;
+}
+
+/**
+ * _alloc_linkspace - allocate large block of hwmod links
+ * @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
+ *
+ * Allocate a large block of struct omap_hwmod_link records. This
+ * improves boot time significantly by avoiding the need to allocate
+ * individual records one by one. If the number of records to
+ * allocate in the block hasn't been manually specified, this function
+ * will count the number of struct omap_hwmod_ocp_if records in @ois
+ * and use that to determine the allocation size. For SoC families
+ * that require multiple list registrations, such as OMAP3xxx, this
+ * estimation process isn't optimal, so manual estimation is advised
+ * in those cases. Returns -EEXIST if the allocation has already occurred
+ * or 0 upon success.
+ */
+static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
+{
+ unsigned int i = 0;
+ unsigned int sz;
+
+ if (linkspace) {
+ WARN(1, "linkspace already allocated\n");
+ return -EEXIST;
+ }
+
+ if (max_ls == 0)
+ while (ois[i++])
+ max_ls += LINKS_PER_OCP_IF;
+
+ sz = sizeof(struct omap_hwmod_link) * max_ls;
+
+ pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
+ __func__, sz, max_ls);
+
+ linkspace = alloc_bootmem(sz);
+
+ memset(linkspace, 0, sz);
+
+ return 0;
+}
/* Public functions */
}
/**
- * omap_hwmod_register - register an array of hwmods
- * @ohs: pointer to an array of omap_hwmods to register
+ * omap_hwmod_register_links - register an array of hwmod links
+ * @ois: pointer to an array of omap_hwmod_ocp_if to register
*
* Intended to be called early in boot before the clock framework is
- * initialized. If @ohs is not null, will register all omap_hwmods
- * listed in @ohs that are valid for this chip. Returns 0.
+ * initialized. If @ois is not null, will register all omap_hwmods
+ * listed in @ois that are valid for this chip. Returns 0.
*/
-int __init omap_hwmod_register(struct omap_hwmod **ohs)
+int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
{
int r, i;
- if (!ohs)
+ if (!ois)
return 0;
+ if (!linkspace) {
+ if (_alloc_linkspace(ois)) {
+ pr_err("omap_hwmod: could not allocate link space\n");
+ return -ENOMEM;
+ }
+ }
+
i = 0;
do {
- r = _register(ohs[i]);
- WARN(r, "omap_hwmod: %s: _register returned %d\n", ohs[i]->name,
- r);
- } while (ohs[++i]);
+ r = _register_link(ois[i]);
+ WARN(r && r != -EEXIST,
+ "omap_hwmod: _register_link(%s -> %s) returned %d\n",
+ ois[i]->master->name, ois[i]->slave->name, r);
+ } while (ois[++i]);
return 0;
}
-/*
- * _populate_mpu_rt_base - populate the virtual address for a hwmod
+/**
+ * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
+ * @oh: pointer to the hwmod currently being set up (usually not the MPU)
*
- * Must be called only from omap_hwmod_setup_*() so ioremap works properly.
- * Assumes the caller takes care of locking if needed.
+ * If the hwmod data corresponding to the MPU subsystem IP block
+ * hasn't been initialized and set up yet, do so now. This must be
+ * done first since sleep dependencies may be added from other hwmods
+ * to the MPU. Intended to be called only by omap_hwmod_setup*(). No
+ * return value.
*/
-static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
{
- if (oh->_state != _HWMOD_STATE_REGISTERED)
- return 0;
-
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
- return 0;
-
- oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-
- return 0;
+ if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN)
+ pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
+ __func__, MPU_INITIATOR_NAME);
+ else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
+ omap_hwmod_setup_one(MPU_INITIATOR_NAME);
}
/**
* omap_hwmod_setup_one - set up a single hwmod
* @oh_name: const char * name of the already-registered hwmod to set up
*
- * Must be called after omap2_clk_init(). Resolves the struct clk
- * names to struct clk pointers for each registered omap_hwmod. Also
- * calls _setup() on each hwmod. Returns -EINVAL upon error or 0 upon
- * success.
+ * Initialize and set up a single hwmod. Intended to be used for a
+ * small number of early devices, such as the timer IP blocks used for
+ * the scheduler clock. Must be called after omap2_clk_init().
+ * Resolves the struct clk names to struct clk pointers for each
+ * registered omap_hwmod. Also calls _setup() on each hwmod. Returns
+ * -EINVAL upon error or 0 upon success.
*/
int __init omap_hwmod_setup_one(const char *oh_name)
{
struct omap_hwmod *oh;
- int r;
pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
- if (!mpu_oh) {
- pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n",
- oh_name, MPU_INITIATOR_NAME);
- return -EINVAL;
- }
-
oh = _lookup(oh_name);
if (!oh) {
WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
return -EINVAL;
}
- if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
- omap_hwmod_setup_one(MPU_INITIATOR_NAME);
-
- r = _populate_mpu_rt_base(oh, NULL);
- if (IS_ERR_VALUE(r)) {
- WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name);
- return -EINVAL;
- }
-
- r = _init_clocks(oh, NULL);
- if (IS_ERR_VALUE(r)) {
- WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name);
- return -EINVAL;
- }
+ _ensure_mpu_hwmod_is_setup(oh);
+ _init(oh, NULL);
_setup(oh, NULL);
return 0;
}
/**
- * omap_hwmod_setup - do some post-clock framework initialization
+ * omap_hwmod_setup_all - set up all registered IP blocks
*
- * Must be called after omap2_clk_init(). Resolves the struct clk names
- * to struct clk pointers for each registered omap_hwmod. Also calls
- * _setup() on each hwmod. Returns 0 upon success.
+ * Initialize and set up all IP blocks registered with the hwmod code.
+ * Must be called after omap2_clk_init(). Resolves the struct clk
+ * names to struct clk pointers for each registered omap_hwmod. Also
+ * calls _setup() on each hwmod. Returns 0 upon success.
*/
static int __init omap_hwmod_setup_all(void)
{
- int r;
-
- if (!mpu_oh) {
- pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
- __func__, MPU_INITIATOR_NAME);
- return -EINVAL;
- }
-
- r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
-
- r = omap_hwmod_for_each(_init_clocks, NULL);
- WARN(IS_ERR_VALUE(r),
- "omap_hwmod: %s: _init_clocks failed\n", __func__);
+ _ensure_mpu_hwmod_is_setup(NULL);
+ omap_hwmod_for_each(_init, NULL);
omap_hwmod_for_each(_setup, NULL);
return 0;
return r;
}
+/*
+ * IP block data retrieval functions
+ */
+
/**
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
* @oh: struct omap_hwmod *
*/
int omap_hwmod_count_resources(struct omap_hwmod *oh)
{
- int ret, i;
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
+ int ret;
+ int i = 0;
ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh);
- for (i = 0; i < oh->slaves_cnt; i++)
- ret += _count_ocp_if_addr_spaces(oh->slaves[i]);
+ p = oh->slave_ports.next;
+
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
+ ret += _count_ocp_if_addr_spaces(os);
+ }
return ret;
}
*/
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
{
- int i, j, mpu_irqs_cnt, sdma_reqs_cnt;
+ struct omap_hwmod_ocp_if *os;
+ struct list_head *p;
+ int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
int r = 0;
/* For each IRQ, DMA, memory area, fill in array.*/
r++;
}
- for (i = 0; i < oh->slaves_cnt; i++) {
- struct omap_hwmod_ocp_if *os;
- int addr_cnt;
+ p = oh->slave_ports.next;
- os = oh->slaves[i];
+ i = 0;
+ while (i < oh->slaves_cnt) {
+ os = _fetch_next_ocp_if(&p, &i);
addr_cnt = _count_ocp_if_addr_spaces(os);
for (j = 0; j < addr_cnt; j++) {
return r;
}
+/**
+ * omap_hwmod_get_resource_byname - fetch IP block integration data by name
+ * @oh: struct omap_hwmod * to operate on
+ * @type: one of the IORESOURCE_* constants from include/linux/ioport.h
+ * @name: pointer to the name of the data to fetch (optional)
+ * @rsrc: pointer to a struct resource, allocated by the caller
+ *
+ * Retrieve MPU IRQ, SDMA request line, or address space start/end
+ * data for the IP block pointed to by @oh. The data will be filled
+ * into a struct resource record pointed to by @rsrc. The struct
+ * resource must be allocated by the caller. When @name is non-null,
+ * the data associated with the matching entry in the IRQ/SDMA/address
+ * space hwmod data arrays will be returned. If @name is null, the
+ * first array entry will be returned. Data order is not meaningful
+ * in hwmod data, so callers are strongly encouraged to use a non-null
+ * @name whenever possible to avoid unpredictable effects if hwmod
+ * data is later added that causes data ordering to change. This
+ * function is only intended for use by OMAP core code. Device
+ * drivers should not call this function - the appropriate bus-related
+ * data accessor functions should be used instead. Returns 0 upon
+ * success or a negative error code upon error.
+ */
+int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
+ const char *name, struct resource *rsrc)
+{
+ int r;
+ unsigned int irq, dma;
+ u32 pa_start, pa_end;
+
+ if (!oh || !rsrc)
+ return -EINVAL;
+
+ if (type == IORESOURCE_IRQ) {
+ r = _get_mpu_irq_by_name(oh, name, &irq);
+ if (r)
+ return r;
+
+ rsrc->start = irq;
+ rsrc->end = irq;
+ } else if (type == IORESOURCE_DMA) {
+ r = _get_sdma_req_by_name(oh, name, &dma);
+ if (r)
+ return r;
+
+ rsrc->start = dma;
+ rsrc->end = dma;
+ } else if (type == IORESOURCE_MEM) {
+ r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end);
+ if (r)
+ return r;
+
+ rsrc->start = pa_start;
+ rsrc->end = pa_end;
+ } else {
+ return -EINVAL;
+ }
+
+ rsrc->flags = type;
+ rsrc->name = name;
+
+ return 0;
+}
+
/**
* omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
* @oh: struct omap_hwmod *
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
{
struct clk *c;
+ struct omap_hwmod_ocp_if *oi;
if (!oh)
return NULL;
if (oh->_clk) {
c = oh->_clk;
} else {
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+ oi = _find_mpu_rt_port(oh);
+ if (!oi)
return NULL;
- c = oh->slaves[oh->_mpu_port_index]->_clk;
+ c = oi->_clk;
}
if (!c->clkdm)
* @state: state that _setup() should leave the hwmod in
*
* Sets the hwmod state that @oh will enter at the end of _setup()
- * (called by omap_hwmod_setup_*()). Only valid to call between
- * calling omap_hwmod_register() and omap_hwmod_setup_*(). Returns
- * 0 upon success or -EINVAL if there is a problem with the arguments
- * or if the hwmod is in the wrong state.
+ * (called by omap_hwmod_setup_*()). See also the documentation
+ * for _setup_postsetup(), above. Returns 0 upon success or
+ * -EINVAL if there is a problem with the arguments or if the hwmod is
+ * in the wrong state.
*/
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
{
* omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
*
* Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
/*
* OMAP2420 hardware module integration data
*
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
* TI hardware database or other technical documentation. Data that
* is driver-specific or driver-kernel integration-specific belongs
* elsewhere.
*/
-static struct omap_hwmod omap2420_mpu_hwmod;
-static struct omap_hwmod omap2420_iva_hwmod;
-static struct omap_hwmod omap2420_l3_main_hwmod;
-static struct omap_hwmod omap2420_l4_core_hwmod;
-static struct omap_hwmod omap2420_dss_core_hwmod;
-static struct omap_hwmod omap2420_dss_dispc_hwmod;
-static struct omap_hwmod omap2420_dss_rfbi_hwmod;
-static struct omap_hwmod omap2420_dss_venc_hwmod;
-static struct omap_hwmod omap2420_wd_timer2_hwmod;
-static struct omap_hwmod omap2420_gpio1_hwmod;
-static struct omap_hwmod omap2420_gpio2_hwmod;
-static struct omap_hwmod omap2420_gpio3_hwmod;
-static struct omap_hwmod omap2420_gpio4_hwmod;
-static struct omap_hwmod omap2420_dma_system_hwmod;
-static struct omap_hwmod omap2420_mcspi1_hwmod;
-static struct omap_hwmod omap2420_mcspi2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
- .master = &omap2420_l3_main_hwmod,
- .slave = &omap2420_l4_core_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2420_mpu__l3_main = {
- .master = &omap2420_mpu_hwmod,
- .slave = &omap2420_l3_main_hwmod,
- .user = OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_slaves[] = {
- &omap2420_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2420_dss__l3 = {
- .master = &omap2420_dss_core_hwmod,
- .slave = &omap2420_l3_main_hwmod,
- .fw = {
- .omap2 = {
- .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
- .flags = OMAP_FIREWALL_L3,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l3_main_masters[] = {
- &omap2420_l3_main__l4_core,
-};
-
-/* L3 */
-static struct omap_hwmod omap2420_l3_main_hwmod = {
- .name = "l3_main",
- .class = &l3_hwmod_class,
- .masters = omap2420_l3_main_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_l3_main_masters),
- .slaves = omap2420_l3_main_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_l3_main_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-static struct omap_hwmod omap2420_l4_wkup_hwmod;
-static struct omap_hwmod omap2420_uart1_hwmod;
-static struct omap_hwmod omap2420_uart2_hwmod;
-static struct omap_hwmod omap2420_uart3_hwmod;
-static struct omap_hwmod omap2420_i2c1_hwmod;
-static struct omap_hwmod omap2420_i2c2_hwmod;
-static struct omap_hwmod omap2420_mcbsp1_hwmod;
-static struct omap_hwmod omap2420_mcbsp2_hwmod;
-
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_mcspi1_hwmod,
- .clk = "mcspi1_ick",
- .addr = omap2_mcspi1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_mcspi2_hwmod,
- .clk = "mcspi2_ick",
- .addr = omap2_mcspi2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_l4_wkup_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_uart1_hwmod,
- .clk = "uart1_ick",
- .addr = omap2xxx_uart1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_uart2_hwmod,
- .clk = "uart2_ick",
- .addr = omap2xxx_uart2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_uart3_hwmod,
- .clk = "uart3_ick",
- .addr = omap2xxx_uart3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_i2c1_hwmod,
- .clk = "i2c1_ick",
- .addr = omap2_i2c1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_i2c2_hwmod,
- .clk = "i2c2_ick",
- .addr = omap2_i2c2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
- &omap2420_l3_main__l4_core,
-};
-
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
- &omap2420_l4_core__l4_wkup,
- &omap2_l4_core__uart1,
- &omap2_l4_core__uart2,
- &omap2_l4_core__uart3,
- &omap2420_l4_core__i2c1,
- &omap2420_l4_core__i2c2
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap2420_l4_core_hwmod = {
- .name = "l4_core",
- .class = &l4_hwmod_class,
- .masters = omap2420_l4_core_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_l4_core_masters),
- .slaves = omap2420_l4_core_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_l4_core_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_slaves[] = {
- &omap2420_l4_core__l4_wkup,
-};
-
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2420_l4_wkup_masters[] = {
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2420_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &l4_hwmod_class,
- .masters = omap2420_l4_wkup_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_l4_wkup_masters),
- .slaves = omap2420_l4_wkup_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_l4_wkup_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2420_mpu_masters[] = {
- &omap2420_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2420_mpu_hwmod = {
- .name = "mpu",
- .class = &mpu_hwmod_class,
- .main_clk = "mpu_ck",
- .masters = omap2420_mpu_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_mpu_masters),
-};
-
/*
- * IVA1 interface data
+ * IP blocks
*/
-/* IVA <- L3 interface */
-static struct omap_hwmod_ocp_if omap2420_l3__iva = {
- .master = &omap2420_l3_main_hwmod,
- .slave = &omap2420_iva_hwmod,
- .clk = "iva1_ifck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* IVA1 (IVA1) */
+static struct omap_hwmod_class iva1_hwmod_class = {
+ .name = "iva1",
};
-static struct omap_hwmod_ocp_if *omap2420_iva_masters[] = {
- &omap2420_l3__iva,
+static struct omap_hwmod_rst_info omap2420_iva_resets[] = {
+ { .name = "iva", .rst_shift = 8 },
};
-/*
- * IVA2 (IVA2)
- */
-
static struct omap_hwmod omap2420_iva_hwmod = {
.name = "iva",
- .class = &iva_hwmod_class,
- .masters = omap2420_iva_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_iva_masters),
+ .class = &iva1_hwmod_class,
+ .clkdm_name = "iva1_clkdm",
+ .rst_lines = omap2420_iva_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap2420_iva_resets),
+ .main_clk = "iva1_ifck",
};
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
+/* DSP */
+static struct omap_hwmod_class dsp_hwmod_class = {
+ .name = "dsp",
};
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
+static struct omap_hwmod_rst_info omap2420_dsp_resets[] = {
+ { .name = "logic", .rst_shift = 0 },
+ { .name = "mmu", .rst_shift = 1 },
};
-/* timer1 */
-static struct omap_hwmod omap2420_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
- {
- .pa_start = 0x48028000,
- .pa_end = 0x48028000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+static struct omap_hwmod omap2420_dsp_hwmod = {
+ .name = "dsp",
+ .class = &dsp_hwmod_class,
+ .clkdm_name = "dsp_clkdm",
+ .rst_lines = omap2420_dsp_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap2420_dsp_resets),
+ .main_clk = "dsp_fck",
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_timer1_hwmod,
- .clk = "gpt1_ick",
- .addr = omap2420_timer1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = {
- &omap2420_l4_wkup__timer1,
-};
-
-/* timer1 hwmod */
-static struct omap_hwmod omap2420_timer1_hwmod = {
- .name = "timer1",
- .mpu_irqs = omap2_timer1_mpu_irqs,
- .main_clk = "gpt1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT1_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap2420_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer2_hwmod,
- .clk = "gpt2_ick",
- .addr = omap2xxx_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = {
- &omap2420_l4_core__timer2,
-};
-
-/* timer2 hwmod */
-static struct omap_hwmod omap2420_timer2_hwmod = {
- .name = "timer2",
- .mpu_irqs = omap2_timer2_mpu_irqs,
- .main_clk = "gpt2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT2_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2420_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer3_hwmod,
- .clk = "gpt3_ick",
- .addr = omap2xxx_timer3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = {
- &omap2420_l4_core__timer3,
-};
-
-/* timer3 hwmod */
-static struct omap_hwmod omap2420_timer3_hwmod = {
- .name = "timer3",
- .mpu_irqs = omap2_timer3_mpu_irqs,
- .main_clk = "gpt3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT3_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer4 */
-static struct omap_hwmod omap2420_timer4_hwmod;
-
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer4_hwmod,
- .clk = "gpt4_ick",
- .addr = omap2xxx_timer4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = {
- &omap2420_l4_core__timer4,
-};
-
-/* timer4 hwmod */
-static struct omap_hwmod omap2420_timer4_hwmod = {
- .name = "timer4",
- .mpu_irqs = omap2_timer4_mpu_irqs,
- .main_clk = "gpt4_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT4_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer5 */
-static struct omap_hwmod omap2420_timer5_hwmod;
-
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer5_hwmod,
- .clk = "gpt5_ick",
- .addr = omap2xxx_timer5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = {
- &omap2420_l4_core__timer5,
-};
-
-/* timer5 hwmod */
-static struct omap_hwmod omap2420_timer5_hwmod = {
- .name = "timer5",
- .mpu_irqs = omap2_timer5_mpu_irqs,
- .main_clk = "gpt5_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT5_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-
-/* timer6 */
-static struct omap_hwmod omap2420_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer6_hwmod,
- .clk = "gpt6_ick",
- .addr = omap2xxx_timer6_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = {
- &omap2420_l4_core__timer6,
-};
-
-/* timer6 hwmod */
-static struct omap_hwmod omap2420_timer6_hwmod = {
- .name = "timer6",
- .mpu_irqs = omap2_timer6_mpu_irqs,
- .main_clk = "gpt6_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT6_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x20,
+ .syss_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* timer7 */
-static struct omap_hwmod omap2420_timer7_hwmod;
-
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer7_hwmod,
- .clk = "gpt7_ick",
- .addr = omap2xxx_timer7_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class i2c_class = {
+ .name = "i2c",
+ .sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = {
- &omap2420_l4_core__timer7,
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+ .flags = OMAP_I2C_FLAG_NO_FIFO |
+ OMAP_I2C_FLAG_SIMPLE_CLOCK |
+ OMAP_I2C_FLAG_16BIT_DATA_REG |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
-/* timer7 hwmod */
-static struct omap_hwmod omap2420_timer7_hwmod = {
- .name = "timer7",
- .mpu_irqs = omap2_timer7_mpu_irqs,
- .main_clk = "gpt7_fck",
+/* I2C1 */
+static struct omap_hwmod omap2420_i2c1_hwmod = {
+ .name = "i2c1",
+ .mpu_irqs = omap2_i2c1_mpu_irqs,
+ .sdma_reqs = omap2_i2c1_sdma_reqs,
+ .main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT7_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer7_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer8 */
-static struct omap_hwmod omap2420_timer8_hwmod;
-
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer8_hwmod,
- .clk = "gpt8_ick",
- .addr = omap2xxx_timer8_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = {
- &omap2420_l4_core__timer8,
-};
-
-/* timer8 hwmod */
-static struct omap_hwmod omap2420_timer8_hwmod = {
- .name = "timer8",
- .mpu_irqs = omap2_timer8_mpu_irqs,
- .main_clk = "gpt8_fck",
- .prcm = {
- .omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT8_SHIFT,
- .module_offs = CORE_MOD,
+ .module_bit = OMAP2420_EN_I2C1_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+ .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2420_timer8_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer9 */
-static struct omap_hwmod omap2420_timer9_hwmod;
-
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer9_hwmod,
- .clk = "gpt9_ick",
- .addr = omap2xxx_timer9_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = {
- &omap2420_l4_core__timer9,
+ .class = &i2c_class,
+ .dev_attr = &i2c_dev_attr,
+ .flags = HWMOD_16BIT_REG,
};
-/* timer9 hwmod */
-static struct omap_hwmod omap2420_timer9_hwmod = {
- .name = "timer9",
- .mpu_irqs = omap2_timer9_mpu_irqs,
- .main_clk = "gpt9_fck",
+/* I2C2 */
+static struct omap_hwmod omap2420_i2c2_hwmod = {
+ .name = "i2c2",
+ .mpu_irqs = omap2_i2c2_mpu_irqs,
+ .sdma_reqs = omap2_i2c2_sdma_reqs,
+ .main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT9_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
- },
- },
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2420_timer9_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap2420_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer10_hwmod,
- .clk = "gpt10_ick",
- .addr = omap2_timer10_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = {
- &omap2420_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2420_timer10_hwmod = {
- .name = "timer10",
- .mpu_irqs = omap2_timer10_mpu_irqs,
- .main_clk = "gpt10_fck",
- .prcm = {
- .omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT10_SHIFT,
- .module_offs = CORE_MOD,
+ .module_bit = OMAP2420_EN_I2C2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
+ .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2420_timer10_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap2420_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer11_hwmod,
- .clk = "gpt11_ick",
- .addr = omap2_timer11_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = {
- &omap2420_l4_core__timer11,
+ .class = &i2c_class,
+ .dev_attr = &i2c_dev_attr,
+ .flags = HWMOD_16BIT_REG,
};
-/* timer11 hwmod */
-static struct omap_hwmod omap2420_timer11_hwmod = {
- .name = "timer11",
- .mpu_irqs = omap2_timer11_mpu_irqs,
- .main_clk = "gpt11_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT11_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
- },
- },
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2420_timer11_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32,
+ .lch_count = 32,
};
-/* timer12 */
-static struct omap_hwmod omap2420_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_timer12_hwmod,
- .clk = "gpt12_ick",
- .addr = omap2xxx_timer12_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap2420_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap2xxx_dma_hwmod_class,
+ .mpu_irqs = omap2_dma_system_irqs,
+ .main_clk = "core_l3_ck",
+ .dev_attr = &dma_dev_attr,
+ .flags = HWMOD_NO_IDLEST,
};
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = {
- &omap2420_l4_core__timer12,
+/* mailbox */
+static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
+ { .name = "dsp", .irq = 26 },
+ { .name = "iva", .irq = 34 },
+ { .irq = -1 }
};
-/* timer12 hwmod */
-static struct omap_hwmod omap2420_timer12_hwmod = {
- .name = "timer12",
- .mpu_irqs = omap2xxx_timer12_mpu_irqs,
- .main_clk = "gpt12_fck",
+static struct omap_hwmod omap2420_mailbox_hwmod = {
+ .name = "mailbox",
+ .class = &omap2xxx_mailbox_hwmod_class,
+ .mpu_irqs = omap2420_mailbox_irqs,
+ .main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT12_SHIFT,
+ .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
+ .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2420_timer12_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
- {
- .pa_start = 0x48022000,
- .pa_end = 0x4802207f,
- .flags = ADDR_TYPE_RT
- },
- { }
};
-static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_wd_timer2_hwmod,
- .clk = "mpu_wdt_ick",
- .addr = omap2420_wd_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = {
- &omap2420_l4_wkup__wd_timer2,
-};
+/*
+ * 'mcbsp' class
+ * multi channel buffered serial port controller
+ */
-static struct omap_hwmod omap2420_wd_timer2_hwmod = {
- .name = "wd_timer2",
- .class = &omap2xxx_wd_timer_hwmod_class,
- .main_clk = "mpu_wdt_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
- },
- },
- .slaves = omap2420_wd_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_wd_timer2_slaves),
+static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
+ .name = "mcbsp",
};
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = {
- &omap2_l4_core__uart1,
+/* mcbsp1 */
+static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
+ { .name = "tx", .irq = 59 },
+ { .name = "rx", .irq = 60 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap2420_uart1_hwmod = {
- .name = "uart1",
- .mpu_irqs = omap2_uart1_mpu_irqs,
- .sdma_reqs = omap2_uart1_sdma_reqs,
- .main_clk = "uart1_fck",
+static struct omap_hwmod omap2420_mcbsp1_hwmod = {
+ .name = "mcbsp1",
+ .class = &omap2420_mcbsp_hwmod_class,
+ .mpu_irqs = omap2420_mcbsp1_irqs,
+ .sdma_reqs = omap2_mcbsp1_sdma_reqs,
+ .main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
- .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_UART1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
- },
- },
- .slaves = omap2420_uart1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves),
- .class = &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = {
- &omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2420_uart2_hwmod = {
- .name = "uart2",
- .mpu_irqs = omap2_uart2_mpu_irqs,
- .sdma_reqs = omap2_uart2_sdma_reqs,
- .main_clk = "uart2_fck",
- .prcm = {
- .omap2 = {
+ .module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
.module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_UART2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
- },
- },
- .slaves = omap2420_uart2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves),
- .class = &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = {
- &omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2420_uart3_hwmod = {
- .name = "uart3",
- .mpu_irqs = omap2_uart3_mpu_irqs,
- .sdma_reqs = omap2_uart3_sdma_reqs,
- .main_clk = "uart3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 2,
- .module_bit = OMAP24XX_EN_UART3_SHIFT,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+ .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
},
},
- .slaves = omap2420_uart3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves),
- .class = &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = {
- &omap2420_dss__l3,
};
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_dss_core_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
- .flags = OMAP_FIREWALL_L4,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_slaves[] = {
- &omap2420_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- /*
- * The DSS HW needs all DSS clocks enabled during reset. The dss_core
- * driver does not use these clocks.
- */
- { .role = "tv_clk", .clk = "dss_54m_fck" },
- { .role = "sys_clk", .clk = "dss2_fck" },
+/* mcbsp2 */
+static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
+ { .name = "tx", .irq = 62 },
+ { .name = "rx", .irq = 63 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap2420_dss_core_hwmod = {
- .name = "dss_core",
- .class = &omap2_dss_hwmod_class,
- .main_clk = "dss1_fck", /* instead of dss_fck */
- .sdma_reqs = omap2xxx_dss_sdma_chs,
+static struct omap_hwmod omap2420_mcbsp2_hwmod = {
+ .name = "mcbsp2",
+ .class = &omap2420_mcbsp_hwmod_class,
+ .mpu_irqs = omap2420_mcbsp2_irqs,
+ .sdma_reqs = omap2_mcbsp2_sdma_reqs,
+ .main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
- .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+ .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
},
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .slaves = omap2420_dss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_dss_slaves),
- .masters = omap2420_dss_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_dss_masters),
- .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_dss_dispc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_dispc_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
- .flags = OMAP_FIREWALL_L4,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = {
- &omap2420_l4_core__dss_dispc,
-};
-
-static struct omap_hwmod omap2420_dss_dispc_hwmod = {
- .name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
- .mpu_irqs = omap2_dispc_irqs,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
- },
- },
- .slaves = omap2420_dss_dispc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_dss_dispc_slaves),
- .flags = HWMOD_NO_IDLEST,
- .dev_attr = &omap2_3_dss_dispc_dev_attr
-};
+/*
+ * interfaces
+ */
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_dss_rfbi_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_rfbi_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
- .flags = OMAP_FIREWALL_L4,
- }
- },
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2420_i2c1_hwmod,
+ .clk = "i2c1_ick",
+ .addr = omap2_i2c1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = {
- &omap2420_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
- { .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2420_dss_rfbi_hwmod = {
- .name = "dss_rfbi",
- .class = &omap2_rfbi_hwmod_class,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- },
- },
- .opt_clks = dss_rfbi_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
- .slaves = omap2420_dss_rfbi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_dss_rfbi_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
- .master = &omap2420_l4_core_hwmod,
- .slave = &omap2420_dss_venc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_venc_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
- .flags = OMAP_FIREWALL_L4,
- }
- },
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2420_i2c2_hwmod,
+ .clk = "i2c2_ick",
+ .addr = omap2_i2c2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = {
- &omap2420_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2420_dss_venc_hwmod = {
- .name = "dss_venc",
- .class = &omap2_venc_hwmod_class,
- .main_clk = "dss_54m_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- },
- },
- .slaves = omap2420_dss_venc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_dss_venc_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x20,
- .syss_offs = 0x10,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
- .rev = OMAP_I2C_IP_VERSION_1,
- .reset = &omap_i2c_reset,
-};
-
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .flags = OMAP_I2C_FLAG_NO_FIFO |
- OMAP_I2C_FLAG_SIMPLE_CLOCK |
- OMAP_I2C_FLAG_16BIT_DATA_REG |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
-};
-
-/* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = {
- &omap2420_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap2420_i2c1_hwmod = {
- .name = "i2c1",
- .mpu_irqs = omap2_i2c1_mpu_irqs,
- .sdma_reqs = omap2_i2c1_sdma_reqs,
- .main_clk = "i2c1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP2420_EN_I2C1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
- },
- },
- .slaves = omap2420_i2c1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_i2c1_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
- .flags = HWMOD_16BIT_REG,
+/* IVA <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__iva = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2420_iva_hwmod,
+ .clk = "core_l3_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* I2C2 */
+/* DSP <- L3 interface */
+static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2420_dsp_hwmod,
+ .clk = "dsp_ick",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
-static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = {
- &omap2420_l4_core__i2c2,
+static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
+ {
+ .pa_start = 0x48028000,
+ .pa_end = 0x48028000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod omap2420_i2c2_hwmod = {
- .name = "i2c2",
- .mpu_irqs = omap2_i2c2_mpu_irqs,
- .sdma_reqs = omap2_i2c2_sdma_reqs,
- .main_clk = "i2c2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP2420_EN_I2C2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
- },
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_timer1_hwmod,
+ .clk = "gpt1_ick",
+ .addr = omap2420_timer1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
+ {
+ .pa_start = 0x48022000,
+ .pa_end = 0x4802207f,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap2420_i2c2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_i2c2_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
- .flags = HWMOD_16BIT_REG,
+ { }
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_wd_timer2_hwmod,
+ .clk = "mpu_wdt_ick",
+ .addr = omap2420_wd_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_gpio1_hwmod,
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio1_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_gpio2_hwmod,
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio2_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_gpio3_hwmod,
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio3_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
- .master = &omap2420_l4_wkup_hwmod,
- .slave = &omap2420_gpio4_hwmod,
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio4_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
- &omap2420_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2420_gpio1_hwmod = {
- .name = "gpio1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio1_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2420_gpio1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
- &omap2420_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2420_gpio2_hwmod = {
- .name = "gpio2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio2_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2420_gpio2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
- &omap2420_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2420_gpio3_hwmod = {
- .name = "gpio3",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio3_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2420_gpio3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
- &omap2420_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2420_gpio4_hwmod = {
- .name = "gpio4",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio4_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2420_gpio4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32,
- .lch_count = 32,
-};
-
/* dma_system -> L3 */
static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
.master = &omap2420_dma_system_hwmod,
- .slave = &omap2420_l3_main_hwmod,
+ .slave = &omap2xxx_l3_main_hwmod,
.clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
- &omap2420_dma_system__l3,
-};
-
/* l4_core -> dma_system */
static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
- .master = &omap2420_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_dma_system_hwmod,
.clk = "sdma_ick",
.addr = omap2_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
- &omap2420_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap2420_dma_system_hwmod = {
- .name = "dma",
- .class = &omap2xxx_dma_hwmod_class,
- .mpu_irqs = omap2_dma_system_irqs,
- .main_clk = "core_l3_ck",
- .slaves = omap2420_dma_system_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_dma_system_slaves),
- .masters = omap2420_dma_system_masters,
- .masters_cnt = ARRAY_SIZE(omap2420_dma_system_masters),
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2420_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
- { .name = "dsp", .irq = 26 },
- { .name = "iva", .irq = 34 },
- { .irq = -1 }
-};
-
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
- .master = &omap2420_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mailbox_hwmod,
.addr = omap2_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = {
- &omap2420_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap2420_mailbox_hwmod = {
- .name = "mailbox",
- .class = &omap2xxx_mailbox_hwmod_class,
- .mpu_irqs = omap2420_mailbox_irqs,
- .main_clk = "mailboxes_ick",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
- },
- },
- .slaves = omap2420_mailbox_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = {
- &omap2420_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2420_mcspi1_hwmod = {
- .name = "mcspi1_hwmod",
- .mpu_irqs = omap2_mcspi1_mpu_irqs,
- .sdma_reqs = omap2_mcspi1_sdma_reqs,
- .main_clk = "mcspi1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
- },
- },
- .slaves = omap2420_mcspi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves),
- .class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = {
- &omap2420_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2420_mcspi2_hwmod = {
- .name = "mcspi2_hwmod",
- .mpu_irqs = omap2_mcspi2_mpu_irqs,
- .sdma_reqs = omap2_mcspi2_sdma_reqs,
- .main_clk = "mcspi2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
- },
- },
- .slaves = omap2420_mcspi2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves),
- .class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi2_dev_attr,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
- .name = "mcbsp",
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
-};
-
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
- .master = &omap2420_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
.addr = omap2_mcbsp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp1_slaves[] = {
- &omap2420_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap2420_mcbsp1_hwmod = {
- .name = "mcbsp1",
- .class = &omap2420_mcbsp_hwmod_class,
- .mpu_irqs = omap2420_mcbsp1_irqs,
- .sdma_reqs = omap2_mcbsp1_sdma_reqs,
- .main_clk = "mcbsp1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
- },
- },
- .slaves = omap2420_mcbsp1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
-};
-
/* l4_core -> mcbsp2 */
static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
- .master = &omap2420_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.addr = omap2xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2420_mcbsp2_slaves[] = {
+static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
+ &omap2xxx_l3_main__l4_core,
+ &omap2xxx_mpu__l3_main,
+ &omap2xxx_dss__l3,
+ &omap2xxx_l4_core__mcspi1,
+ &omap2xxx_l4_core__mcspi2,
+ &omap2xxx_l4_core__l4_wkup,
+ &omap2_l4_core__uart1,
+ &omap2_l4_core__uart2,
+ &omap2_l4_core__uart3,
+ &omap2420_l4_core__i2c1,
+ &omap2420_l4_core__i2c2,
+ &omap2420_l3__iva,
+ &omap2420_l3__dsp,
+ &omap2420_l4_wkup__timer1,
+ &omap2xxx_l4_core__timer2,
+ &omap2xxx_l4_core__timer3,
+ &omap2xxx_l4_core__timer4,
+ &omap2xxx_l4_core__timer5,
+ &omap2xxx_l4_core__timer6,
+ &omap2xxx_l4_core__timer7,
+ &omap2xxx_l4_core__timer8,
+ &omap2xxx_l4_core__timer9,
+ &omap2xxx_l4_core__timer10,
+ &omap2xxx_l4_core__timer11,
+ &omap2xxx_l4_core__timer12,
+ &omap2420_l4_wkup__wd_timer2,
+ &omap2xxx_l4_core__dss,
+ &omap2xxx_l4_core__dss_dispc,
+ &omap2xxx_l4_core__dss_rfbi,
+ &omap2xxx_l4_core__dss_venc,
+ &omap2420_l4_wkup__gpio1,
+ &omap2420_l4_wkup__gpio2,
+ &omap2420_l4_wkup__gpio3,
+ &omap2420_l4_wkup__gpio4,
+ &omap2420_dma_system__l3,
+ &omap2420_l4_core__dma_system,
+ &omap2420_l4_core__mailbox,
+ &omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
-};
-
-static struct omap_hwmod omap2420_mcbsp2_hwmod = {
- .name = "mcbsp2",
- .class = &omap2420_mcbsp_hwmod_class,
- .mpu_irqs = omap2420_mcbsp2_irqs,
- .sdma_reqs = omap2_mcbsp2_sdma_reqs,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
- },
- },
- .slaves = omap2420_mcbsp2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2420_mcbsp2_slaves),
-};
-
-static __initdata struct omap_hwmod *omap2420_hwmods[] = {
- &omap2420_l3_main_hwmod,
- &omap2420_l4_core_hwmod,
- &omap2420_l4_wkup_hwmod,
- &omap2420_mpu_hwmod,
- &omap2420_iva_hwmod,
-
- &omap2420_timer1_hwmod,
- &omap2420_timer2_hwmod,
- &omap2420_timer3_hwmod,
- &omap2420_timer4_hwmod,
- &omap2420_timer5_hwmod,
- &omap2420_timer6_hwmod,
- &omap2420_timer7_hwmod,
- &omap2420_timer8_hwmod,
- &omap2420_timer9_hwmod,
- &omap2420_timer10_hwmod,
- &omap2420_timer11_hwmod,
- &omap2420_timer12_hwmod,
-
- &omap2420_wd_timer2_hwmod,
- &omap2420_uart1_hwmod,
- &omap2420_uart2_hwmod,
- &omap2420_uart3_hwmod,
- /* dss class */
- &omap2420_dss_core_hwmod,
- &omap2420_dss_dispc_hwmod,
- &omap2420_dss_rfbi_hwmod,
- &omap2420_dss_venc_hwmod,
- /* i2c class */
- &omap2420_i2c1_hwmod,
- &omap2420_i2c2_hwmod,
-
- /* gpio class */
- &omap2420_gpio1_hwmod,
- &omap2420_gpio2_hwmod,
- &omap2420_gpio3_hwmod,
- &omap2420_gpio4_hwmod,
-
- /* dma_system class*/
- &omap2420_dma_system_hwmod,
-
- /* mailbox class */
- &omap2420_mailbox_hwmod,
-
- /* mcbsp class */
- &omap2420_mcbsp1_hwmod,
- &omap2420_mcbsp2_hwmod,
-
- /* mcspi class */
- &omap2420_mcspi1_hwmod,
- &omap2420_mcspi2_hwmod,
NULL,
};
int __init omap2420_hwmod_init(void)
{
- return omap_hwmod_register(omap2420_hwmods);
+ return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
}
* omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips
*
* Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
/*
* OMAP2430 hardware module integration data
*
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
* TI hardware database or other technical documentation. Data that
* is driver-specific or driver-kernel integration-specific belongs
* elsewhere.
*/
-static struct omap_hwmod omap2430_mpu_hwmod;
-static struct omap_hwmod omap2430_iva_hwmod;
-static struct omap_hwmod omap2430_l3_main_hwmod;
-static struct omap_hwmod omap2430_l4_core_hwmod;
-static struct omap_hwmod omap2430_dss_core_hwmod;
-static struct omap_hwmod omap2430_dss_dispc_hwmod;
-static struct omap_hwmod omap2430_dss_rfbi_hwmod;
-static struct omap_hwmod omap2430_dss_venc_hwmod;
-static struct omap_hwmod omap2430_wd_timer2_hwmod;
-static struct omap_hwmod omap2430_gpio1_hwmod;
-static struct omap_hwmod omap2430_gpio2_hwmod;
-static struct omap_hwmod omap2430_gpio3_hwmod;
-static struct omap_hwmod omap2430_gpio4_hwmod;
-static struct omap_hwmod omap2430_gpio5_hwmod;
-static struct omap_hwmod omap2430_dma_system_hwmod;
-static struct omap_hwmod omap2430_mcbsp1_hwmod;
-static struct omap_hwmod omap2430_mcbsp2_hwmod;
-static struct omap_hwmod omap2430_mcbsp3_hwmod;
-static struct omap_hwmod omap2430_mcbsp4_hwmod;
-static struct omap_hwmod omap2430_mcbsp5_hwmod;
-static struct omap_hwmod omap2430_mcspi1_hwmod;
-static struct omap_hwmod omap2430_mcspi2_hwmod;
-static struct omap_hwmod omap2430_mcspi3_hwmod;
-static struct omap_hwmod omap2430_mmc1_hwmod;
-static struct omap_hwmod omap2430_mmc2_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
- .master = &omap2430_l3_main_hwmod,
- .slave = &omap2430_l4_core_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
+/*
+ * IP blocks
+ */
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap2430_mpu__l3_main = {
- .master = &omap2430_mpu_hwmod,
- .slave = &omap2430_l3_main_hwmod,
- .user = OCP_USER_MPU,
+/* IVA2 (IVA2) */
+static struct omap_hwmod_rst_info omap2430_iva_resets[] = {
+ { .name = "logic", .rst_shift = 0 },
+ { .name = "mmu", .rst_shift = 1 },
};
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_slaves[] = {
- &omap2430_mpu__l3_main,
+static struct omap_hwmod omap2430_iva_hwmod = {
+ .name = "iva",
+ .class = &iva_hwmod_class,
+ .clkdm_name = "dsp_clkdm",
+ .rst_lines = omap2430_iva_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap2430_iva_resets),
+ .main_clk = "dsp_fck",
};
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap2430_dss__l3 = {
- .master = &omap2430_dss_core_hwmod,
- .slave = &omap2430_l3_main_hwmod,
- .fw = {
- .omap2 = {
- .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
- .flags = OMAP_FIREWALL_L3,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x20,
+ .syss_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l3_main_masters[] = {
- &omap2430_l3_main__l4_core,
+static struct omap_hwmod_class i2c_class = {
+ .name = "i2c",
+ .sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
-/* L3 */
-static struct omap_hwmod omap2430_l3_main_hwmod = {
- .name = "l3_main",
- .class = &l3_hwmod_class,
- .masters = omap2430_l3_main_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_l3_main_masters),
- .slaves = omap2430_l3_main_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_l3_main_slaves),
- .flags = HWMOD_NO_IDLEST,
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+ .fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_BUS_SHIFT_2 |
+ OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
};
-static struct omap_hwmod omap2430_l4_wkup_hwmod;
-static struct omap_hwmod omap2430_uart1_hwmod;
-static struct omap_hwmod omap2430_uart2_hwmod;
-static struct omap_hwmod omap2430_uart3_hwmod;
-static struct omap_hwmod omap2430_i2c1_hwmod;
-static struct omap_hwmod omap2430_i2c2_hwmod;
-
-static struct omap_hwmod omap2430_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
- .master = &omap2430_usbhsotg_hwmod,
- .slave = &omap2430_l3_main_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU,
+/* I2C1 */
+static struct omap_hwmod omap2430_i2c1_hwmod = {
+ .name = "i2c1",
+ .flags = HWMOD_16BIT_REG,
+ .mpu_irqs = omap2_i2c1_mpu_irqs,
+ .sdma_reqs = omap2_i2c1_sdma_reqs,
+ .main_clk = "i2chs1_fck",
+ .prcm = {
+ .omap2 = {
+ /*
+ * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
+ * I2CHS IP's do not follow the usual pattern.
+ * prcm_reg_id alone cannot be used to program
+ * the iclk and fclk. Needs to be handled using
+ * additional flags when clk handling is moved
+ * to hwmod framework.
+ */
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP2430_EN_I2CHS1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
+ },
+ },
+ .class = &i2c_class,
+ .dev_attr = &i2c_dev_attr,
};
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_i2c1_hwmod,
- .clk = "i2c1_ick",
- .addr = omap2_i2c1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* I2C2 */
+static struct omap_hwmod omap2430_i2c2_hwmod = {
+ .name = "i2c2",
+ .flags = HWMOD_16BIT_REG,
+ .mpu_irqs = omap2_i2c2_mpu_irqs,
+ .sdma_reqs = omap2_i2c2_sdma_reqs,
+ .main_clk = "i2chs2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP2430_EN_I2CHS2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
+ },
+ },
+ .class = &i2c_class,
+ .dev_attr = &i2c_dev_attr,
};
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_i2c2_hwmod,
- .clk = "i2c2_ick",
- .addr = omap2_i2c2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* gpio5 */
+static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
+ { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
+ { .irq = -1 }
};
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_l4_wkup_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap2430_gpio5_hwmod = {
+ .name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap243x_gpio5_irqs,
+ .main_clk = "gpio5_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 2,
+ .module_bit = OMAP2430_EN_GPIO5_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
+ },
+ },
+ .class = &omap2xxx_gpio_hwmod_class,
+ .dev_attr = &omap2xxx_gpio_dev_attr,
};
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_uart1_hwmod,
- .clk = "uart1_ick",
- .addr = omap2xxx_uart1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
};
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_uart2_hwmod,
- .clk = "uart2_ick",
- .addr = omap2xxx_uart2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap2430_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap2xxx_dma_hwmod_class,
+ .mpu_irqs = omap2_dma_system_irqs,
+ .main_clk = "core_l3_ck",
+ .dev_attr = &dma_dev_attr,
+ .flags = HWMOD_NO_IDLEST,
};
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_uart3_hwmod,
- .clk = "uart3_ick",
- .addr = omap2xxx_uart3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* mailbox */
+static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
+ { .irq = 26 },
+ { .irq = -1 }
};
-/*
-* usbhsotg interface data
-*/
-static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
- {
- .pa_start = OMAP243X_HS_BASE,
- .pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap2430_mailbox_hwmod = {
+ .name = "mailbox",
+ .class = &omap2xxx_mailbox_hwmod_class,
+ .mpu_irqs = omap2430_mailbox_irqs,
+ .main_clk = "mailboxes_ick",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
+ },
},
- { }
};
-/* l4_core ->usbhsotg interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_usbhsotg_hwmod,
- .clk = "usb_l4_ick",
- .addr = omap2430_usbhsotg_addrs,
- .user = OCP_USER_MPU,
+/* mcspi3 */
+static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
+ { .irq = 91 },
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_masters[] = {
- &omap2430_usbhsotg__l3,
+static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
+ { .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */
+ { .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */
+ { .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */
+ { .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */
+ { .dma_req = -1 }
};
-static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = {
- &omap2430_l4_core__usbhsotg,
+static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
+ .num_chipselect = 2,
};
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mmc1_hwmod,
- .clk = "mmchs1_ick",
- .addr = omap2430_mmc1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap2430_mcspi3_hwmod = {
+ .name = "mcspi3",
+ .mpu_irqs = omap2430_mcspi3_mpu_irqs,
+ .sdma_reqs = omap2430_mcspi3_sdma_reqs,
+ .main_clk = "mcspi3_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 2,
+ .module_bit = OMAP2430_EN_MCSPI3_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
+ },
+ },
+ .class = &omap2xxx_mcspi_class,
+ .dev_attr = &omap_mcspi3_dev_attr,
};
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mmc2_hwmod,
- .clk = "mmchs2_ick",
- .addr = omap2430_mmc2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* usbhsotg */
+static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
+ .rev_offs = 0x0400,
+ .sysc_offs = 0x0404,
+ .syss_offs = 0x0408,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_slaves[] = {
- &omap2430_l3_main__l4_core,
+static struct omap_hwmod_class usbotg_class = {
+ .name = "usbotg",
+ .sysc = &omap2430_usbhsotg_sysc,
};
-/* Master interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_core_masters[] = {
- &omap2430_l4_core__l4_wkup,
- &omap2430_l4_core__mmc1,
- &omap2430_l4_core__mmc2,
-};
+/* usb_otg_hs */
+static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
-/* L4 CORE */
-static struct omap_hwmod omap2430_l4_core_hwmod = {
- .name = "l4_core",
- .class = &l4_hwmod_class,
- .masters = omap2430_l4_core_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_l4_core_masters),
- .slaves = omap2430_l4_core_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_l4_core_slaves),
- .flags = HWMOD_NO_IDLEST,
+ { .name = "mc", .irq = 92 },
+ { .name = "dma", .irq = 93 },
+ { .irq = -1 }
};
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_slaves[] = {
- &omap2430_l4_core__l4_wkup,
- &omap2_l4_core__uart1,
- &omap2_l4_core__uart2,
- &omap2_l4_core__uart3,
+static struct omap_hwmod omap2430_usbhsotg_hwmod = {
+ .name = "usb_otg_hs",
+ .mpu_irqs = omap2430_usbhsotg_mpu_irqs,
+ .main_clk = "usbhs_ick",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP2430_EN_USBHS_MASK,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
+ },
+ },
+ .class = &usbotg_class,
+ /*
+ * Erratum ID: i479 idle_req / idle_ack mechanism potentially
+ * broken when autoidle is enabled
+ * workaround is to disable the autoidle bit at module level.
+ */
+ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
+ | HWMOD_SWSUP_MSTANDBY,
};
-/* Master interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = {
-};
+/*
+ * 'mcbsp' class
+ * multi channel buffered serial port controller
+ */
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mcspi1_hwmod,
- .clk = "mcspi1_ick",
- .addr = omap2_mcspi1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
+ .rev_offs = 0x007C,
+ .sysc_offs = 0x008C,
+ .sysc_flags = (SYSC_HAS_SOFTRESET),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mcspi2_hwmod,
- .clk = "mcspi2_ick",
- .addr = omap2_mcspi2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mcspi3_hwmod,
- .clk = "mcspi3_ick",
- .addr = omap2430_mcspi3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap2430_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &l4_hwmod_class,
- .masters = omap2430_l4_wkup_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_l4_wkup_masters),
- .slaves = omap2430_l4_wkup_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_l4_wkup_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap2430_mpu_masters[] = {
- &omap2430_mpu__l3_main,
-};
-
-/* MPU */
-static struct omap_hwmod omap2430_mpu_hwmod = {
- .name = "mpu",
- .class = &mpu_hwmod_class,
- .main_clk = "mpu_ck",
- .masters = omap2430_mpu_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_mpu_masters),
-};
-
-/*
- * IVA2_1 interface data
- */
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap2430_l3__iva = {
- .master = &omap2430_l3_main_hwmod,
- .slave = &omap2430_iva_hwmod,
- .clk = "dsp_fck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if *omap2430_iva_masters[] = {
- &omap2430_l3__iva,
-};
-
-/*
- * IVA2 (IVA2)
- */
-
-static struct omap_hwmod omap2430_iva_hwmod = {
- .name = "iva",
- .class = &iva_hwmod_class,
- .masters = omap2430_iva_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_iva_masters),
-};
-
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
-};
-
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
-};
-
-/* timer1 */
-static struct omap_hwmod omap2430_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
- {
- .pa_start = 0x49018000,
- .pa_end = 0x49018000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_timer1_hwmod,
- .clk = "gpt1_ick",
- .addr = omap2430_timer1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
+ .name = "mcbsp",
+ .sysc = &omap2430_mcbsp_sysc,
+ .rev = MCBSP_CONFIG_TYPE2,
};
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = {
- &omap2430_l4_wkup__timer1,
+/* mcbsp1 */
+static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
+ { .name = "tx", .irq = 59 },
+ { .name = "rx", .irq = 60 },
+ { .name = "ovr", .irq = 61 },
+ { .name = "common", .irq = 64 },
+ { .irq = -1 }
};
-/* timer1 hwmod */
-static struct omap_hwmod omap2430_timer1_hwmod = {
- .name = "timer1",
- .mpu_irqs = omap2_timer1_mpu_irqs,
- .main_clk = "gpt1_fck",
+static struct omap_hwmod omap2430_mcbsp1_hwmod = {
+ .name = "mcbsp1",
+ .class = &omap2430_mcbsp_hwmod_class,
+ .mpu_irqs = omap2430_mcbsp1_irqs,
+ .sdma_reqs = omap2_mcbsp1_sdma_reqs,
+ .main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT1_SHIFT,
- .module_offs = WKUP_MOD,
+ .module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
+ .module_offs = CORE_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
+ .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer2 */
-static struct omap_hwmod omap2430_timer2_hwmod;
-
-/* l4_core -> timer2 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer2_hwmod,
- .clk = "gpt2_ick",
- .addr = omap2xxx_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = {
- &omap2430_l4_core__timer2,
+/* mcbsp2 */
+static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
+ { .name = "tx", .irq = 62 },
+ { .name = "rx", .irq = 63 },
+ { .name = "common", .irq = 16 },
+ { .irq = -1 }
};
-/* timer2 hwmod */
-static struct omap_hwmod omap2430_timer2_hwmod = {
- .name = "timer2",
- .mpu_irqs = omap2_timer2_mpu_irqs,
- .main_clk = "gpt2_fck",
+static struct omap_hwmod omap2430_mcbsp2_hwmod = {
+ .name = "mcbsp2",
+ .class = &omap2430_mcbsp_hwmod_class,
+ .mpu_irqs = omap2430_mcbsp2_irqs,
+ .sdma_reqs = omap2_mcbsp2_sdma_reqs,
+ .main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT2_SHIFT,
+ .module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
+ .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap2430_timer3_hwmod;
-
-/* l4_core -> timer3 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer3_hwmod,
- .clk = "gpt3_ick",
- .addr = omap2xxx_timer3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = {
- &omap2430_l4_core__timer3,
+/* mcbsp3 */
+static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
+ { .name = "tx", .irq = 89 },
+ { .name = "rx", .irq = 90 },
+ { .name = "common", .irq = 17 },
+ { .irq = -1 }
};
-/* timer3 hwmod */
-static struct omap_hwmod omap2430_timer3_hwmod = {
- .name = "timer3",
- .mpu_irqs = omap2_timer3_mpu_irqs,
- .main_clk = "gpt3_fck",
+static struct omap_hwmod omap2430_mcbsp3_hwmod = {
+ .name = "mcbsp3",
+ .class = &omap2430_mcbsp_hwmod_class,
+ .mpu_irqs = omap2430_mcbsp3_irqs,
+ .sdma_reqs = omap2_mcbsp3_sdma_reqs,
+ .main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT3_SHIFT,
+ .module_bit = OMAP2430_EN_MCBSP3_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves),
- .class = &omap2xxx_timer_hwmod_class,
};
-/* timer4 */
-static struct omap_hwmod omap2430_timer4_hwmod;
-
-/* l4_core -> timer4 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer4_hwmod,
- .clk = "gpt4_ick",
- .addr = omap2xxx_timer4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* mcbsp4 */
+static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
+ { .name = "tx", .irq = 54 },
+ { .name = "rx", .irq = 55 },
+ { .name = "common", .irq = 18 },
+ { .irq = -1 }
};
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = {
- &omap2430_l4_core__timer4,
+static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
+ { .name = "rx", .dma_req = 20 },
+ { .name = "tx", .dma_req = 19 },
+ { .dma_req = -1 }
};
-/* timer4 hwmod */
-static struct omap_hwmod omap2430_timer4_hwmod = {
- .name = "timer4",
- .mpu_irqs = omap2_timer4_mpu_irqs,
- .main_clk = "gpt4_fck",
+static struct omap_hwmod omap2430_mcbsp4_hwmod = {
+ .name = "mcbsp4",
+ .class = &omap2430_mcbsp_hwmod_class,
+ .mpu_irqs = omap2430_mcbsp4_irqs,
+ .sdma_reqs = omap2430_mcbsp4_sdma_chs,
+ .main_clk = "mcbsp4_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT4_SHIFT,
+ .module_bit = OMAP2430_EN_MCBSP4_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves),
- .class = &omap2xxx_timer_hwmod_class,
};
-/* timer5 */
-static struct omap_hwmod omap2430_timer5_hwmod;
-
-/* l4_core -> timer5 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer5_hwmod,
- .clk = "gpt5_ick",
- .addr = omap2xxx_timer5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* mcbsp5 */
+static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
+ { .name = "tx", .irq = 81 },
+ { .name = "rx", .irq = 82 },
+ { .name = "common", .irq = 19 },
+ { .irq = -1 }
};
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = {
- &omap2430_l4_core__timer5,
+static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
+ { .name = "rx", .dma_req = 22 },
+ { .name = "tx", .dma_req = 21 },
+ { .dma_req = -1 }
};
-/* timer5 hwmod */
-static struct omap_hwmod omap2430_timer5_hwmod = {
- .name = "timer5",
- .mpu_irqs = omap2_timer5_mpu_irqs,
- .main_clk = "gpt5_fck",
+static struct omap_hwmod omap2430_mcbsp5_hwmod = {
+ .name = "mcbsp5",
+ .class = &omap2430_mcbsp_hwmod_class,
+ .mpu_irqs = omap2430_mcbsp5_irqs,
+ .sdma_reqs = omap2430_mcbsp5_sdma_chs,
+ .main_clk = "mcbsp5_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT5_SHIFT,
+ .module_bit = OMAP2430_EN_MCBSP5_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves),
- .class = &omap2xxx_timer_hwmod_class,
};
-/* timer6 */
-static struct omap_hwmod omap2430_timer6_hwmod;
-
-/* l4_core -> timer6 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer6_hwmod,
- .clk = "gpt6_ick",
- .addr = omap2xxx_timer6_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* MMC/SD/SDIO common */
+static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
+ .rev_offs = 0x1fc,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = {
- &omap2430_l4_core__timer6,
+static struct omap_hwmod_class omap2430_mmc_class = {
+ .name = "mmc",
+ .sysc = &omap2430_mmc_sysc,
};
-/* timer6 hwmod */
-static struct omap_hwmod omap2430_timer6_hwmod = {
- .name = "timer6",
- .mpu_irqs = omap2_timer6_mpu_irqs,
- .main_clk = "gpt6_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT6_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
- },
- },
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+/* MMC/SD/SDIO1 */
+static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
+ { .irq = 83 },
+ { .irq = -1 }
};
-/* timer7 */
-static struct omap_hwmod omap2430_timer7_hwmod;
+static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */
+ { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */
+ { .dma_req = -1 }
+};
-/* l4_core -> timer7 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer7_hwmod,
- .clk = "gpt7_ick",
- .addr = omap2xxx_timer7_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
+ { .role = "dbck", .clk = "mmchsdb1_fck" },
};
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = {
- &omap2430_l4_core__timer7,
+static struct omap_mmc_dev_attr mmc1_dev_attr = {
+ .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
-/* timer7 hwmod */
-static struct omap_hwmod omap2430_timer7_hwmod = {
- .name = "timer7",
- .mpu_irqs = omap2_timer7_mpu_irqs,
- .main_clk = "gpt7_fck",
+static struct omap_hwmod omap2430_mmc1_hwmod = {
+ .name = "mmc1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2430_mmc1_mpu_irqs,
+ .sdma_reqs = omap2430_mmc1_sdma_reqs,
+ .opt_clks = omap2430_mmc1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks),
+ .main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT7_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
+ .prcm_reg_id = 2,
+ .module_bit = OMAP2430_EN_MMCHS1_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer7_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+ .dev_attr = &mmc1_dev_attr,
+ .class = &omap2430_mmc_class,
};
-/* timer8 */
-static struct omap_hwmod omap2430_timer8_hwmod;
+/* MMC/SD/SDIO2 */
+static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
+ { .irq = 86 },
+ { .irq = -1 }
+};
-/* l4_core -> timer8 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer8_hwmod,
- .clk = "gpt8_ick",
- .addr = omap2xxx_timer8_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */
+ { .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */
+ { .dma_req = -1 }
};
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = {
- &omap2430_l4_core__timer8,
+static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
+ { .role = "dbck", .clk = "mmchsdb2_fck" },
};
-/* timer8 hwmod */
-static struct omap_hwmod omap2430_timer8_hwmod = {
- .name = "timer8",
- .mpu_irqs = omap2_timer8_mpu_irqs,
- .main_clk = "gpt8_fck",
+static struct omap_hwmod omap2430_mmc2_hwmod = {
+ .name = "mmc2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2430_mmc2_mpu_irqs,
+ .sdma_reqs = omap2430_mmc2_sdma_reqs,
+ .opt_clks = omap2430_mmc2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks),
+ .main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT8_SHIFT,
.module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+ .prcm_reg_id = 2,
+ .module_bit = OMAP2430_EN_MMCHS2_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap2430_timer8_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+ .class = &omap2430_mmc_class,
};
-/* timer9 */
-static struct omap_hwmod omap2430_timer9_hwmod;
+/*
+ * interfaces
+ */
-/* l4_core -> timer9 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer9_hwmod,
- .clk = "gpt9_ick",
- .addr = omap2xxx_timer9_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* L3 -> L4_CORE interface */
+/* l3_core -> usbhsotg interface */
+static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = {
+ .master = &omap2430_usbhsotg_hwmod,
+ .slave = &omap2xxx_l3_main_hwmod,
+ .clk = "core_l3_ck",
+ .user = OCP_USER_MPU,
};
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = {
- &omap2430_l4_core__timer9,
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_i2c1_hwmod,
+ .clk = "i2c1_ick",
+ .addr = omap2_i2c1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer9 hwmod */
-static struct omap_hwmod omap2430_timer9_hwmod = {
- .name = "timer9",
- .mpu_irqs = omap2_timer9_mpu_irqs,
- .main_clk = "gpt9_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT9_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
- },
- },
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2430_timer9_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves),
- .class = &omap2xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap2430_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer10_hwmod,
- .clk = "gpt10_ick",
- .addr = omap2_timer10_addrs,
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_i2c2_hwmod,
+ .clk = "i2c2_ick",
+ .addr = omap2_i2c2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = {
- &omap2430_l4_core__timer10,
-};
-
-/* timer10 hwmod */
-static struct omap_hwmod omap2430_timer10_hwmod = {
- .name = "timer10",
- .mpu_irqs = omap2_timer10_mpu_irqs,
- .main_clk = "gpt10_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT10_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
- },
+static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = {
+ {
+ .pa_start = OMAP243X_HS_BASE,
+ .pa_end = OMAP243X_HS_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2430_timer10_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+ { }
};
-/* timer11 */
-static struct omap_hwmod omap2430_timer11_hwmod;
+/* l4_core ->usbhsotg interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_usbhsotg_hwmod,
+ .clk = "usb_l4_ick",
+ .addr = omap2430_usbhsotg_addrs,
+ .user = OCP_USER_MPU,
+};
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer11_hwmod,
- .clk = "gpt11_ick",
- .addr = omap2_timer11_addrs,
+/* L4 CORE -> MMC1 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_mmc1_hwmod,
+ .clk = "mmchs1_ick",
+ .addr = omap2430_mmc1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = {
- &omap2430_l4_core__timer11,
+/* L4 CORE -> MMC2 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_mmc2_hwmod,
+ .clk = "mmchs2_ick",
+ .addr = omap2430_mmc2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer11 hwmod */
-static struct omap_hwmod omap2430_timer11_hwmod = {
- .name = "timer11",
- .mpu_irqs = omap2_timer11_mpu_irqs,
- .main_clk = "gpt11_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT11_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
- },
- },
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2430_timer11_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+/* l4 core -> mcspi3 interface */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_mcspi3_hwmod,
+ .clk = "mcspi3_ick",
+ .addr = omap2430_mcspi3_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer12 */
-static struct omap_hwmod omap2430_timer12_hwmod;
-
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_timer12_hwmod,
- .clk = "gpt12_ick",
- .addr = omap2xxx_timer12_addrs,
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap2430_l3__iva = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2430_iva_hwmod,
+ .clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = {
- &omap2430_l4_core__timer12,
+static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = {
+ {
+ .pa_start = 0x49018000,
+ .pa_end = 0x49018000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-/* timer12 hwmod */
-static struct omap_hwmod omap2430_timer12_hwmod = {
- .name = "timer12",
- .mpu_irqs = omap2xxx_timer12_mpu_irqs,
- .main_clk = "gpt12_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPT12_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
- },
- },
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap2430_timer12_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves),
- .class = &omap2xxx_timer_hwmod_class,
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_timer1_hwmod,
+ .clk = "gpt1_ick",
+ .addr = omap2430_timer1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
};
static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_wd_timer2_hwmod,
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_wd_timer2_hwmod,
.clk = "mpu_wdt_ick",
.addr = omap2430_wd_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = {
- &omap2430_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap2430_wd_timer2_hwmod = {
- .name = "wd_timer2",
- .class = &omap2xxx_wd_timer_hwmod_class,
- .main_clk = "mpu_wdt_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
- },
- },
- .slaves = omap2430_wd_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_wd_timer2_slaves),
-};
-
-/* UART1 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = {
- &omap2_l4_core__uart1,
-};
-
-static struct omap_hwmod omap2430_uart1_hwmod = {
- .name = "uart1",
- .mpu_irqs = omap2_uart1_mpu_irqs,
- .sdma_reqs = omap2_uart1_sdma_reqs,
- .main_clk = "uart1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_UART1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
- },
- },
- .slaves = omap2430_uart1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves),
- .class = &omap2_uart_class,
-};
-
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = {
- &omap2_l4_core__uart2,
-};
-
-static struct omap_hwmod omap2430_uart2_hwmod = {
- .name = "uart2",
- .mpu_irqs = omap2_uart2_mpu_irqs,
- .sdma_reqs = omap2_uart2_sdma_reqs,
- .main_clk = "uart2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_UART2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
- },
- },
- .slaves = omap2430_uart2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves),
- .class = &omap2_uart_class,
-};
-
-/* UART3 */
-
-static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = {
- &omap2_l4_core__uart3,
-};
-
-static struct omap_hwmod omap2430_uart3_hwmod = {
- .name = "uart3",
- .mpu_irqs = omap2_uart3_mpu_irqs,
- .sdma_reqs = omap2_uart3_sdma_reqs,
- .main_clk = "uart3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 2,
- .module_bit = OMAP24XX_EN_UART3_SHIFT,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
- },
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
+ {
+ .pa_start = 0x4900C000,
+ .pa_end = 0x4900C1ff,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap2430_uart3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves),
- .class = &omap2_uart_class,
-};
-
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = {
- &omap2430_dss__l3,
+ { }
};
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_dss_core_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_addrs,
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio1_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_slaves[] = {
- &omap2430_l4_core__dss,
-};
-
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- /*
- * The DSS HW needs all DSS clocks enabled during reset. The dss_core
- * driver does not use these clocks.
- */
- { .role = "tv_clk", .clk = "dss_54m_fck" },
- { .role = "sys_clk", .clk = "dss2_fck" },
-};
-
-static struct omap_hwmod omap2430_dss_core_hwmod = {
- .name = "dss_core",
- .class = &omap2_dss_hwmod_class,
- .main_clk = "dss1_fck", /* instead of dss_fck */
- .sdma_reqs = omap2xxx_dss_sdma_chs,
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
- },
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
+ {
+ .pa_start = 0x4900E000,
+ .pa_end = 0x4900E1ff,
+ .flags = ADDR_TYPE_RT
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .slaves = omap2430_dss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_dss_slaves),
- .masters = omap2430_dss_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_dss_masters),
- .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
-};
-
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_dss_dispc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_dispc_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ { }
};
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = {
- &omap2430_l4_core__dss_dispc,
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio2_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap2430_dss_dispc_hwmod = {
- .name = "dss_dispc",
- .class = &omap2_dispc_hwmod_class,
- .mpu_irqs = omap2_dispc_irqs,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
- },
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
+ {
+ .pa_start = 0x49010000,
+ .pa_end = 0x490101ff,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap2430_dss_dispc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_dss_dispc_slaves),
- .flags = HWMOD_NO_IDLEST,
- .dev_attr = &omap2_3_dss_dispc_dev_attr
+ { }
};
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_dss_rfbi_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_rfbi_addrs,
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio3_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = {
- &omap2430_l4_core__dss_rfbi,
-};
-
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
- { .role = "ick", .clk = "dss_ick" },
-};
-
-static struct omap_hwmod omap2430_dss_rfbi_hwmod = {
- .name = "dss_rfbi",
- .class = &omap2_rfbi_hwmod_class,
- .main_clk = "dss1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- },
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
+ {
+ .pa_start = 0x49012000,
+ .pa_end = 0x490121ff,
+ .flags = ADDR_TYPE_RT
},
- .opt_clks = dss_rfbi_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
- .slaves = omap2430_dss_rfbi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_dss_rfbi_slaves),
- .flags = HWMOD_NO_IDLEST,
+ { }
};
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_dss_venc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_venc_addrs,
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
+ .master = &omap2xxx_l4_wkup_hwmod,
+ .slave = &omap2xxx_gpio4_hwmod,
+ .clk = "gpios_ick",
+ .addr = omap2430_gpio4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = {
- &omap2430_l4_core__dss_venc,
-};
-
-static struct omap_hwmod omap2430_dss_venc_hwmod = {
- .name = "dss_venc",
- .class = &omap2_venc_hwmod_class,
- .main_clk = "dss_54m_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_DSS1_SHIFT,
- .module_offs = CORE_MOD,
- },
+/* l4_core -> gpio5 */
+static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
+ {
+ .pa_start = 0x480B6000,
+ .pa_end = 0x480B61ff,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap2430_dss_venc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_dss_venc_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x20,
- .syss_offs = 0x10,
- .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .sysc_fields = &omap_hwmod_sysc_type1,
+ { }
};
-static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
- .rev = OMAP_I2C_IP_VERSION_1,
- .reset = &omap_i2c_reset,
+static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_gpio5_hwmod,
+ .clk = "gpio5_ick",
+ .addr = omap2430_gpio5_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_i2c_dev_attr i2c_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_BUS_SHIFT_2 |
- OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
+ .master = &omap2430_dma_system_hwmod,
+ .slave = &omap2xxx_l3_main_hwmod,
+ .clk = "core_l3_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* I2C1 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
- &omap2430_l4_core__i2c1,
-};
-
-static struct omap_hwmod omap2430_i2c1_hwmod = {
- .name = "i2c1",
- .flags = HWMOD_16BIT_REG,
- .mpu_irqs = omap2_i2c1_mpu_irqs,
- .sdma_reqs = omap2_i2c1_sdma_reqs,
- .main_clk = "i2chs1_fck",
- .prcm = {
- .omap2 = {
- /*
- * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
- * I2CHS IP's do not follow the usual pattern.
- * prcm_reg_id alone cannot be used to program
- * the iclk and fclk. Needs to be handled using
- * additional flags when clk handling is moved
- * to hwmod framework.
- */
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_I2CHS1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
- },
- },
- .slaves = omap2430_i2c1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_i2c1_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
-};
-
-/* I2C2 */
-
-static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
- &omap2430_l4_core__i2c2,
-};
-
-static struct omap_hwmod omap2430_i2c2_hwmod = {
- .name = "i2c2",
- .flags = HWMOD_16BIT_REG,
- .mpu_irqs = omap2_i2c2_mpu_irqs,
- .sdma_reqs = omap2_i2c2_sdma_reqs,
- .main_clk = "i2chs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_I2CHS2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
- },
- },
- .slaves = omap2430_i2c2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_i2c2_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c_dev_attr,
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
- {
- .pa_start = 0x4900C000,
- .pa_end = 0x4900C1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_gpio1_hwmod,
- .clk = "gpios_ick",
- .addr = omap2430_gpio1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio2 */
-static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
- {
- .pa_start = 0x4900E000,
- .pa_end = 0x4900E1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_gpio2_hwmod,
- .clk = "gpios_ick",
- .addr = omap2430_gpio2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio3 */
-static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
- {
- .pa_start = 0x49010000,
- .pa_end = 0x490101ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_gpio3_hwmod,
- .clk = "gpios_ick",
- .addr = omap2430_gpio3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup -> gpio4 */
-static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
- {
- .pa_start = 0x49012000,
- .pa_end = 0x490121ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
- .master = &omap2430_l4_wkup_hwmod,
- .slave = &omap2430_gpio4_hwmod,
- .clk = "gpios_ick",
- .addr = omap2430_gpio4_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_core -> gpio5 */
-static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
- {
- .pa_start = 0x480B6000,
- .pa_end = 0x480B61ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_gpio5_hwmod,
- .clk = "gpio5_ick",
- .addr = omap2430_gpio5_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio dev_attr */
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = false,
-};
-
-/* gpio1 */
-static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
- &omap2430_l4_wkup__gpio1,
-};
-
-static struct omap_hwmod omap2430_gpio1_hwmod = {
- .name = "gpio1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio1_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
- },
- },
- .slaves = omap2430_gpio1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
- &omap2430_l4_wkup__gpio2,
-};
-
-static struct omap_hwmod omap2430_gpio2_hwmod = {
- .name = "gpio2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio2_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2430_gpio2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio3 */
-static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
- &omap2430_l4_wkup__gpio3,
-};
-
-static struct omap_hwmod omap2430_gpio3_hwmod = {
- .name = "gpio3",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio3_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2430_gpio3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
- &omap2430_l4_wkup__gpio4,
-};
-
-static struct omap_hwmod omap2430_gpio4_hwmod = {
- .name = "gpio4",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio4_irqs,
- .main_clk = "gpios_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
- },
- },
- .slaves = omap2430_gpio4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio5 */
-static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
- { .irq = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
- &omap2430_l4_core__gpio5,
-};
-
-static struct omap_hwmod omap2430_gpio5_hwmod = {
- .name = "gpio5",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap243x_gpio5_irqs,
- .main_clk = "gpio5_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 2,
- .module_bit = OMAP2430_EN_GPIO5_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
- },
- },
- .slaves = omap2430_gpio5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves),
- .class = &omap2xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
-};
-
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
- .master = &omap2430_dma_system_hwmod,
- .slave = &omap2430_l3_main_hwmod,
- .clk = "core_l3_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
- &omap2430_dma_system__l3,
-};
-
-/* l4_core -> dma_system */
-static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_dma_system_hwmod,
- .clk = "sdma_ick",
- .addr = omap2_dma_system_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
- &omap2430_l4_core__dma_system,
-};
-
-static struct omap_hwmod omap2430_dma_system_hwmod = {
- .name = "dma",
- .class = &omap2xxx_dma_hwmod_class,
- .mpu_irqs = omap2_dma_system_irqs,
- .main_clk = "core_l3_ck",
- .slaves = omap2430_dma_system_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_dma_system_slaves),
- .masters = omap2430_dma_system_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_dma_system_masters),
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* mailbox */
-static struct omap_hwmod omap2430_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_dma_system_hwmod,
+ .clk = "sdma_ick",
+ .addr = omap2_dma_system_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = {
- .master = &omap2430_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mailbox_hwmod,
- .addr = omap2_mailbox_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = {
- &omap2430_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap2430_mailbox_hwmod = {
- .name = "mailbox",
- .class = &omap2xxx_mailbox_hwmod_class,
- .mpu_irqs = omap2430_mailbox_irqs,
- .main_clk = "mailboxes_ick",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
- },
- },
- .slaves = omap2430_mailbox_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mailbox_slaves),
-};
-
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = {
- &omap2430_l4_core__mcspi1,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
- .num_chipselect = 4,
-};
-
-static struct omap_hwmod omap2430_mcspi1_hwmod = {
- .name = "mcspi1_hwmod",
- .mpu_irqs = omap2_mcspi1_mpu_irqs,
- .sdma_reqs = omap2_mcspi1_sdma_reqs,
- .main_clk = "mcspi1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
- },
- },
- .slaves = omap2430_mcspi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves),
- .class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi1_dev_attr,
-};
-
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = {
- &omap2430_l4_core__mcspi2,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
- .num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2430_mcspi2_hwmod = {
- .name = "mcspi2_hwmod",
- .mpu_irqs = omap2_mcspi2_mpu_irqs,
- .sdma_reqs = omap2_mcspi2_sdma_reqs,
- .main_clk = "mcspi2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
- },
- },
- .slaves = omap2430_mcspi2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves),
- .class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi2_dev_attr,
-};
-
-/* mcspi3 */
-static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = {
- { .irq = 91 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 15 }, /* DMA_SPI3_TX0 */
- { .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */
- { .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */
- { .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */
- { .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = {
- &omap2430_l4_core__mcspi3,
-};
-
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
- .num_chipselect = 2,
-};
-
-static struct omap_hwmod omap2430_mcspi3_hwmod = {
- .name = "mcspi3_hwmod",
- .mpu_irqs = omap2430_mcspi3_mpu_irqs,
- .sdma_reqs = omap2430_mcspi3_sdma_reqs,
- .main_clk = "mcspi3_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 2,
- .module_bit = OMAP2430_EN_MCSPI3_SHIFT,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCSPI3_SHIFT,
- },
- },
- .slaves = omap2430_mcspi3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves),
- .class = &omap2xxx_mcspi_class,
- .dev_attr = &omap_mcspi3_dev_attr,
-};
-
-/*
- * usbhsotg
- */
-static struct omap_hwmod_class_sysconfig omap2430_usbhsotg_sysc = {
- .rev_offs = 0x0400,
- .sysc_offs = 0x0404,
- .syss_offs = 0x0408,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class usbotg_class = {
- .name = "usbotg",
- .sysc = &omap2430_usbhsotg_sysc,
-};
-
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = {
-
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod omap2430_usbhsotg_hwmod = {
- .name = "usb_otg_hs",
- .mpu_irqs = omap2430_usbhsotg_mpu_irqs,
- .main_clk = "usbhs_ick",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_USBHS_MASK,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP2430_ST_USBHS_SHIFT,
- },
- },
- .masters = omap2430_usbhsotg_masters,
- .masters_cnt = ARRAY_SIZE(omap2430_usbhsotg_masters),
- .slaves = omap2430_usbhsotg_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_usbhsotg_slaves),
- .class = &usbotg_class,
- /*
- * Erratum ID: i479 idle_req / idle_ack mechanism potentially
- * broken when autoidle is enabled
- * workaround is to disable the autoidle bit at module level.
- */
- .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
-};
-
-/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
- */
-
-static struct omap_hwmod_class_sysconfig omap2430_mcbsp_sysc = {
- .rev_offs = 0x007C,
- .sysc_offs = 0x008C,
- .sysc_flags = (SYSC_HAS_SOFTRESET),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mcbsp_hwmod_class = {
- .name = "mcbsp",
- .sysc = &omap2430_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE2,
-};
-
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = {
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .name = "ovr", .irq = 61 },
- { .name = "common", .irq = 64 },
- { .irq = -1 }
-};
-
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
- .master = &omap2430_l4_core_hwmod,
- .slave = &omap2430_mcbsp1_hwmod,
- .clk = "mcbsp1_ick",
- .addr = omap2_mcbsp1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp1_slaves[] = {
- &omap2430_l4_core__mcbsp1,
-};
-
-static struct omap_hwmod omap2430_mcbsp1_hwmod = {
- .name = "mcbsp1",
- .class = &omap2430_mcbsp_hwmod_class,
- .mpu_irqs = omap2430_mcbsp1_irqs,
- .sdma_reqs = omap2_mcbsp1_sdma_reqs,
- .main_clk = "mcbsp1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
- },
- },
- .slaves = omap2430_mcbsp1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp1_slaves),
+ .addr = omap2_mailbox_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = {
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .name = "common", .irq = 16 },
- { .irq = -1 }
+/* l4_core -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2430_mcbsp1_hwmod,
+ .clk = "mcbsp1_ick",
+ .addr = omap2_mcbsp1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp2 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = {
- .master = &omap2430_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.addr = omap2xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp2_slaves[] = {
- &omap2430_l4_core__mcbsp2,
-};
-
-static struct omap_hwmod omap2430_mcbsp2_hwmod = {
- .name = "mcbsp2",
- .class = &omap2430_mcbsp_hwmod_class,
- .mpu_irqs = omap2430_mcbsp2_irqs,
- .sdma_reqs = omap2_mcbsp2_sdma_reqs,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
- },
- },
- .slaves = omap2430_mcbsp2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp2_slaves),
-};
-
-/* mcbsp3 */
-static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = {
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .name = "common", .irq = 17 },
- { .irq = -1 }
-};
-
static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = {
{
.name = "mpu",
/* l4_core -> mcbsp3 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = {
- .master = &omap2430_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp3_hwmod,
.clk = "mcbsp3_ick",
.addr = omap2430_mcbsp3_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp3_slaves[] = {
- &omap2430_l4_core__mcbsp3,
-};
-
-static struct omap_hwmod omap2430_mcbsp3_hwmod = {
- .name = "mcbsp3",
- .class = &omap2430_mcbsp_hwmod_class,
- .mpu_irqs = omap2430_mcbsp3_irqs,
- .sdma_reqs = omap2_mcbsp3_sdma_reqs,
- .main_clk = "mcbsp3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_MCBSP3_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP3_SHIFT,
- },
- },
- .slaves = omap2430_mcbsp3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp3_slaves),
-};
-
-/* mcbsp4 */
-static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = {
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .name = "common", .irq = 18 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = {
- { .name = "rx", .dma_req = 20 },
- { .name = "tx", .dma_req = 19 },
- { .dma_req = -1 }
-};
-
static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = {
{
.name = "mpu",
/* l4_core -> mcbsp4 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = {
- .master = &omap2430_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp4_hwmod,
.clk = "mcbsp4_ick",
.addr = omap2430_mcbsp4_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp4_slaves[] = {
- &omap2430_l4_core__mcbsp4,
-};
-
-static struct omap_hwmod omap2430_mcbsp4_hwmod = {
- .name = "mcbsp4",
- .class = &omap2430_mcbsp_hwmod_class,
- .mpu_irqs = omap2430_mcbsp4_irqs,
- .sdma_reqs = omap2430_mcbsp4_sdma_chs,
- .main_clk = "mcbsp4_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_MCBSP4_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP4_SHIFT,
- },
- },
- .slaves = omap2430_mcbsp4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp4_slaves),
-};
-
-/* mcbsp5 */
-static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = {
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .name = "common", .irq = 19 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = {
- { .name = "rx", .dma_req = 22 },
- { .name = "tx", .dma_req = 21 },
- { .dma_req = -1 }
-};
-
static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = {
{
.name = "mpu",
/* l4_core -> mcbsp5 */
static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = {
- .master = &omap2430_l4_core_hwmod,
+ .master = &omap2xxx_l4_core_hwmod,
.slave = &omap2430_mcbsp5_hwmod,
.clk = "mcbsp5_ick",
.addr = omap2430_mcbsp5_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap2430_mcbsp5_slaves[] = {
- &omap2430_l4_core__mcbsp5,
-};
-
-static struct omap_hwmod omap2430_mcbsp5_hwmod = {
- .name = "mcbsp5",
- .class = &omap2430_mcbsp_hwmod_class,
- .mpu_irqs = omap2430_mcbsp5_irqs,
- .sdma_reqs = omap2430_mcbsp5_sdma_chs,
- .main_clk = "mcbsp5_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP2430_EN_MCBSP5_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MCBSP5_SHIFT,
- },
- },
- .slaves = omap2430_mcbsp5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mcbsp5_slaves),
-};
-
-/* MMC/SD/SDIO common */
-
-static struct omap_hwmod_class_sysconfig omap2430_mmc_sysc = {
- .rev_offs = 0x1fc,
- .sysc_offs = 0x10,
- .syss_offs = 0x14,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap2430_mmc_class = {
- .name = "mmc",
- .sysc = &omap2430_mmc_sysc,
-};
-
-/* MMC/SD/SDIO1 */
-
-static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = {
- { .irq = 83 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = {
- { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */
- { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */
- { .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = {
- { .role = "dbck", .clk = "mmchsdb1_fck" },
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mmc1_slaves[] = {
+static struct omap_hwmod_ocp_if *omap2430_hwmod_ocp_ifs[] __initdata = {
+ &omap2xxx_l3_main__l4_core,
+ &omap2xxx_mpu__l3_main,
+ &omap2xxx_dss__l3,
+ &omap2430_usbhsotg__l3,
+ &omap2430_l4_core__i2c1,
+ &omap2430_l4_core__i2c2,
+ &omap2xxx_l4_core__l4_wkup,
+ &omap2_l4_core__uart1,
+ &omap2_l4_core__uart2,
+ &omap2_l4_core__uart3,
+ &omap2430_l4_core__usbhsotg,
&omap2430_l4_core__mmc1,
-};
-
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
- .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
-};
-
-static struct omap_hwmod omap2430_mmc1_hwmod = {
- .name = "mmc1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2430_mmc1_mpu_irqs,
- .sdma_reqs = omap2430_mmc1_sdma_reqs,
- .opt_clks = omap2430_mmc1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks),
- .main_clk = "mmchs1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 2,
- .module_bit = OMAP2430_EN_MMCHS1_SHIFT,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MMCHS1_SHIFT,
- },
- },
- .dev_attr = &mmc1_dev_attr,
- .slaves = omap2430_mmc1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mmc1_slaves),
- .class = &omap2430_mmc_class,
-};
-
-/* MMC/SD/SDIO2 */
-
-static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = {
- { .irq = 86 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = {
- { .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */
- { .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */
- { .dma_req = -1 }
-};
-
-static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = {
- { .role = "dbck", .clk = "mmchsdb2_fck" },
-};
-
-static struct omap_hwmod_ocp_if *omap2430_mmc2_slaves[] = {
&omap2430_l4_core__mmc2,
-};
-
-static struct omap_hwmod omap2430_mmc2_hwmod = {
- .name = "mmc2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2430_mmc2_mpu_irqs,
- .sdma_reqs = omap2430_mmc2_sdma_reqs,
- .opt_clks = omap2430_mmc2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks),
- .main_clk = "mmchs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 2,
- .module_bit = OMAP2430_EN_MMCHS2_SHIFT,
- .idlest_reg_id = 2,
- .idlest_idle_bit = OMAP2430_ST_MMCHS2_SHIFT,
- },
- },
- .slaves = omap2430_mmc2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap2430_mmc2_slaves),
- .class = &omap2430_mmc_class,
-};
-
-static __initdata struct omap_hwmod *omap2430_hwmods[] = {
- &omap2430_l3_main_hwmod,
- &omap2430_l4_core_hwmod,
- &omap2430_l4_wkup_hwmod,
- &omap2430_mpu_hwmod,
- &omap2430_iva_hwmod,
-
- &omap2430_timer1_hwmod,
- &omap2430_timer2_hwmod,
- &omap2430_timer3_hwmod,
- &omap2430_timer4_hwmod,
- &omap2430_timer5_hwmod,
- &omap2430_timer6_hwmod,
- &omap2430_timer7_hwmod,
- &omap2430_timer8_hwmod,
- &omap2430_timer9_hwmod,
- &omap2430_timer10_hwmod,
- &omap2430_timer11_hwmod,
- &omap2430_timer12_hwmod,
-
- &omap2430_wd_timer2_hwmod,
- &omap2430_uart1_hwmod,
- &omap2430_uart2_hwmod,
- &omap2430_uart3_hwmod,
- /* dss class */
- &omap2430_dss_core_hwmod,
- &omap2430_dss_dispc_hwmod,
- &omap2430_dss_rfbi_hwmod,
- &omap2430_dss_venc_hwmod,
- /* i2c class */
- &omap2430_i2c1_hwmod,
- &omap2430_i2c2_hwmod,
- &omap2430_mmc1_hwmod,
- &omap2430_mmc2_hwmod,
-
- /* gpio class */
- &omap2430_gpio1_hwmod,
- &omap2430_gpio2_hwmod,
- &omap2430_gpio3_hwmod,
- &omap2430_gpio4_hwmod,
- &omap2430_gpio5_hwmod,
-
- /* dma_system class*/
- &omap2430_dma_system_hwmod,
-
- /* mcbsp class */
- &omap2430_mcbsp1_hwmod,
- &omap2430_mcbsp2_hwmod,
- &omap2430_mcbsp3_hwmod,
- &omap2430_mcbsp4_hwmod,
- &omap2430_mcbsp5_hwmod,
-
- /* mailbox class */
- &omap2430_mailbox_hwmod,
-
- /* mcspi class */
- &omap2430_mcspi1_hwmod,
- &omap2430_mcspi2_hwmod,
- &omap2430_mcspi3_hwmod,
-
- /* usbotg class*/
- &omap2430_usbhsotg_hwmod,
-
+ &omap2xxx_l4_core__mcspi1,
+ &omap2xxx_l4_core__mcspi2,
+ &omap2430_l4_core__mcspi3,
+ &omap2430_l3__iva,
+ &omap2430_l4_wkup__timer1,
+ &omap2xxx_l4_core__timer2,
+ &omap2xxx_l4_core__timer3,
+ &omap2xxx_l4_core__timer4,
+ &omap2xxx_l4_core__timer5,
+ &omap2xxx_l4_core__timer6,
+ &omap2xxx_l4_core__timer7,
+ &omap2xxx_l4_core__timer8,
+ &omap2xxx_l4_core__timer9,
+ &omap2xxx_l4_core__timer10,
+ &omap2xxx_l4_core__timer11,
+ &omap2xxx_l4_core__timer12,
+ &omap2430_l4_wkup__wd_timer2,
+ &omap2xxx_l4_core__dss,
+ &omap2xxx_l4_core__dss_dispc,
+ &omap2xxx_l4_core__dss_rfbi,
+ &omap2xxx_l4_core__dss_venc,
+ &omap2430_l4_wkup__gpio1,
+ &omap2430_l4_wkup__gpio2,
+ &omap2430_l4_wkup__gpio3,
+ &omap2430_l4_wkup__gpio4,
+ &omap2430_l4_core__gpio5,
+ &omap2430_dma_system__l3,
+ &omap2430_l4_core__dma_system,
+ &omap2430_l4_core__mailbox,
+ &omap2430_l4_core__mcbsp1,
+ &omap2430_l4_core__mcbsp2,
+ &omap2430_l4_core__mcbsp3,
+ &omap2430_l4_core__mcbsp4,
+ &omap2430_l4_core__mcbsp5,
NULL,
};
int __init omap2430_hwmod_init(void)
{
- return omap_hwmod_register(omap2430_hwmods);
+ return omap_hwmod_register_links(omap2430_hwmod_ocp_ifs);
}
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
+#include <plat/l3_2xxx.h>
+#include <plat/l4_2xxx.h>
#include "omap_hwmod_common_data.h"
-struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
{
.pa_start = OMAP2_UART1_BASE,
.pa_end = OMAP2_UART1_BASE + SZ_8K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
{
.pa_start = OMAP2_UART2_BASE,
.pa_end = OMAP2_UART2_BASE + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
+static struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
{
.pa_start = OMAP2_UART3_BASE,
.pa_end = OMAP2_UART3_BASE + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
{
.pa_start = 0x4802a000,
.pa_end = 0x4802a000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
{
.pa_start = 0x48078000,
.pa_end = 0x48078000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
{
.pa_start = 0x4807a000,
.pa_end = 0x4807a000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
{
.pa_start = 0x4807c000,
.pa_end = 0x4807c000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
{
.pa_start = 0x4807e000,
.pa_end = 0x4807e000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
{
.pa_start = 0x48080000,
.pa_end = 0x48080000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
{
.pa_start = 0x48082000,
.pa_end = 0x48082000 + SZ_1K - 1,
{ }
};
-struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
+static struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
{
.pa_start = 0x48084000,
.pa_end = 0x48084000 + SZ_1K - 1,
{ }
};
+/*
+ * Common interconnect data
+ */
+
+/* L3 -> L4_CORE interface */
+struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core = {
+ .master = &omap2xxx_l3_main_hwmod,
+ .slave = &omap2xxx_l4_core_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* MPU -> L3 interface */
+struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main = {
+ .master = &omap2xxx_mpu_hwmod,
+ .slave = &omap2xxx_l3_main_hwmod,
+ .user = OCP_USER_MPU,
+};
+
+/* DSS -> l3 */
+struct omap_hwmod_ocp_if omap2xxx_dss__l3 = {
+ .master = &omap2xxx_dss_core_hwmod,
+ .slave = &omap2xxx_l3_main_hwmod,
+ .fw = {
+ .omap2 = {
+ .l3_perm_bit = OMAP2_L3_CORE_FW_CONNID_DSS,
+ .flags = OMAP_FIREWALL_L3,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4_CORE -> L4_WKUP interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_l4_wkup_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART1 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_uart1_hwmod,
+ .clk = "uart1_ick",
+ .addr = omap2xxx_uart1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> UART2 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_uart2_hwmod,
+ .clk = "uart2_ick",
+ .addr = omap2xxx_uart2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 PER -> UART3 interface */
+struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_uart3_hwmod,
+ .clk = "uart3_ick",
+ .addr = omap2xxx_uart3_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi1 interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_mcspi1_hwmod,
+ .clk = "mcspi1_ick",
+ .addr = omap2_mcspi1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4 core -> mcspi2 interface */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_mcspi2_hwmod,
+ .clk = "mcspi2_ick",
+ .addr = omap2_mcspi2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer2 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer2_hwmod,
+ .clk = "gpt2_ick",
+ .addr = omap2xxx_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer3 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer3_hwmod,
+ .clk = "gpt3_ick",
+ .addr = omap2xxx_timer3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer4 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer4_hwmod,
+ .clk = "gpt4_ick",
+ .addr = omap2xxx_timer4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer5 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer5_hwmod,
+ .clk = "gpt5_ick",
+ .addr = omap2xxx_timer5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer6 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer6_hwmod,
+ .clk = "gpt6_ick",
+ .addr = omap2xxx_timer6_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer7 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer7_hwmod,
+ .clk = "gpt7_ick",
+ .addr = omap2xxx_timer7_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer8 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer8_hwmod,
+ .clk = "gpt8_ick",
+ .addr = omap2xxx_timer8_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer9 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer9_hwmod,
+ .clk = "gpt9_ick",
+ .addr = omap2xxx_timer9_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer10 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer10_hwmod,
+ .clk = "gpt10_ick",
+ .addr = omap2_timer10_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer11 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer11_hwmod,
+ .clk = "gpt11_ick",
+ .addr = omap2_timer11_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> timer12 */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12 = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_timer12_hwmod,
+ .clk = "gpt12_ick",
+ .addr = omap2xxx_timer12_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_dss_core_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_dispc */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_dss_dispc_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_dispc_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_rfbi */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_dss_rfbi_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_rfbi_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> dss_venc */
+struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc = {
+ .master = &omap2xxx_l4_core_hwmod,
+ .slave = &omap2xxx_dss_venc_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_venc_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
*/
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
+#include <plat/gpio.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <plat/mcspi.h>
#include <mach/irqs.h>
#include "omap_hwmod_common_data.h"
+#include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
#include "wd_timer.h"
struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = {
.sysc = &omap2xxx_mcspi_sysc,
.rev = OMAP2_MCSPI_REV,
};
+
+/*
+ * IP blocks
+ */
+
+/* L3 */
+struct omap_hwmod omap2xxx_l3_main_hwmod = {
+ .name = "l3_main",
+ .class = &l3_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* L4 CORE */
+struct omap_hwmod omap2xxx_l4_core_hwmod = {
+ .name = "l4_core",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* L4 WKUP */
+struct omap_hwmod omap2xxx_l4_wkup_hwmod = {
+ .name = "l4_wkup",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* MPU */
+struct omap_hwmod omap2xxx_mpu_hwmod = {
+ .name = "mpu",
+ .class = &mpu_hwmod_class,
+ .main_clk = "mpu_ck",
+};
+
+/* IVA2 */
+struct omap_hwmod omap2xxx_iva_hwmod = {
+ .name = "iva",
+ .class = &iva_hwmod_class,
+};
+
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
+};
+
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
+};
+
+/* timer1 */
+
+struct omap_hwmod omap2xxx_timer1_hwmod = {
+ .name = "timer1",
+ .mpu_irqs = omap2_timer1_mpu_irqs,
+ .main_clk = "gpt1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT1_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT1_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer2 */
+
+struct omap_hwmod omap2xxx_timer2_hwmod = {
+ .name = "timer2",
+ .mpu_irqs = omap2_timer2_mpu_irqs,
+ .main_clk = "gpt2_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT2_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT2_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer3 */
+
+struct omap_hwmod omap2xxx_timer3_hwmod = {
+ .name = "timer3",
+ .mpu_irqs = omap2_timer3_mpu_irqs,
+ .main_clk = "gpt3_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT3_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT3_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer4 */
+
+struct omap_hwmod omap2xxx_timer4_hwmod = {
+ .name = "timer4",
+ .mpu_irqs = omap2_timer4_mpu_irqs,
+ .main_clk = "gpt4_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT4_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT4_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer5 */
+
+struct omap_hwmod omap2xxx_timer5_hwmod = {
+ .name = "timer5",
+ .mpu_irqs = omap2_timer5_mpu_irqs,
+ .main_clk = "gpt5_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT5_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT5_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer6 */
+
+struct omap_hwmod omap2xxx_timer6_hwmod = {
+ .name = "timer6",
+ .mpu_irqs = omap2_timer6_mpu_irqs,
+ .main_clk = "gpt6_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT6_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT6_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer7 */
+
+struct omap_hwmod omap2xxx_timer7_hwmod = {
+ .name = "timer7",
+ .mpu_irqs = omap2_timer7_mpu_irqs,
+ .main_clk = "gpt7_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT7_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT7_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer8 */
+
+struct omap_hwmod omap2xxx_timer8_hwmod = {
+ .name = "timer8",
+ .mpu_irqs = omap2_timer8_mpu_irqs,
+ .main_clk = "gpt8_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT8_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT8_SHIFT,
+ },
+ },
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer9 */
+
+struct omap_hwmod omap2xxx_timer9_hwmod = {
+ .name = "timer9",
+ .mpu_irqs = omap2_timer9_mpu_irqs,
+ .main_clk = "gpt9_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT9_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT9_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer10 */
+
+struct omap_hwmod omap2xxx_timer10_hwmod = {
+ .name = "timer10",
+ .mpu_irqs = omap2_timer10_mpu_irqs,
+ .main_clk = "gpt10_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT10_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer11 */
+
+struct omap_hwmod omap2xxx_timer11_hwmod = {
+ .name = "timer11",
+ .mpu_irqs = omap2_timer11_mpu_irqs,
+ .main_clk = "gpt11_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT11_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT11_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* timer12 */
+
+struct omap_hwmod omap2xxx_timer12_hwmod = {
+ .name = "timer12",
+ .mpu_irqs = omap2xxx_timer12_mpu_irqs,
+ .main_clk = "gpt12_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPT12_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPT12_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap2xxx_timer_hwmod_class,
+};
+
+/* wd_timer2 */
+struct omap_hwmod omap2xxx_wd_timer2_hwmod = {
+ .name = "wd_timer2",
+ .class = &omap2xxx_wd_timer_hwmod_class,
+ .main_clk = "mpu_wdt_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_MPU_WDT_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_MPU_WDT_SHIFT,
+ },
+ },
+};
+
+/* UART1 */
+
+struct omap_hwmod omap2xxx_uart1_hwmod = {
+ .name = "uart1",
+ .mpu_irqs = omap2_uart1_mpu_irqs,
+ .sdma_reqs = omap2_uart1_sdma_reqs,
+ .main_clk = "uart1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_UART1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_UART1_SHIFT,
+ },
+ },
+ .class = &omap2_uart_class,
+};
+
+/* UART2 */
+
+struct omap_hwmod omap2xxx_uart2_hwmod = {
+ .name = "uart2",
+ .mpu_irqs = omap2_uart2_mpu_irqs,
+ .sdma_reqs = omap2_uart2_sdma_reqs,
+ .main_clk = "uart2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_UART2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_EN_UART2_SHIFT,
+ },
+ },
+ .class = &omap2_uart_class,
+};
+
+/* UART3 */
+
+struct omap_hwmod omap2xxx_uart3_hwmod = {
+ .name = "uart3",
+ .mpu_irqs = omap2_uart3_mpu_irqs,
+ .sdma_reqs = omap2_uart3_sdma_reqs,
+ .main_clk = "uart3_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 2,
+ .module_bit = OMAP24XX_EN_UART3_SHIFT,
+ .idlest_reg_id = 2,
+ .idlest_idle_bit = OMAP24XX_EN_UART3_SHIFT,
+ },
+ },
+ .class = &omap2_uart_class,
+};
+
+/* dss */
+
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
+ { .role = "tv_clk", .clk = "dss_54m_fck" },
+ { .role = "sys_clk", .clk = "dss2_fck" },
+};
+
+struct omap_hwmod omap2xxx_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .main_clk = "dss1_fck", /* instead of dss_fck */
+ .sdma_reqs = omap2xxx_dss_sdma_chs,
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+ },
+ },
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+ .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+};
+
+struct omap_hwmod omap2xxx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap2_dispc_hwmod_class,
+ .mpu_irqs = omap2_dispc_irqs,
+ .main_clk = "dss1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_stdby_bit = OMAP24XX_ST_DSS_SHIFT,
+ },
+ },
+ .flags = HWMOD_NO_IDLEST,
+ .dev_attr = &omap2_3_dss_dispc_dev_attr
+};
+
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
+};
+
+struct omap_hwmod omap2xxx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .main_clk = "dss1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ },
+ },
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+ .flags = HWMOD_NO_IDLEST,
+};
+
+struct omap_hwmod omap2xxx_dss_venc_hwmod = {
+ .name = "dss_venc",
+ .class = &omap2_venc_hwmod_class,
+ .main_clk = "dss_54m_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_DSS1_SHIFT,
+ .module_offs = CORE_MOD,
+ },
+ },
+ .flags = HWMOD_NO_IDLEST,
+};
+
+/* gpio dev_attr */
+struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr = {
+ .bank_width = 32,
+ .dbck_flag = false,
+};
+
+/* gpio1 */
+struct omap_hwmod omap2xxx_gpio1_hwmod = {
+ .name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio1_irqs,
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+ },
+ },
+ .class = &omap2xxx_gpio_hwmod_class,
+ .dev_attr = &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio2 */
+struct omap_hwmod omap2xxx_gpio2_hwmod = {
+ .name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio2_irqs,
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+ },
+ },
+ .class = &omap2xxx_gpio_hwmod_class,
+ .dev_attr = &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio3 */
+struct omap_hwmod omap2xxx_gpio3_hwmod = {
+ .name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio3_irqs,
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+ },
+ },
+ .class = &omap2xxx_gpio_hwmod_class,
+ .dev_attr = &omap2xxx_gpio_dev_attr,
+};
+
+/* gpio4 */
+struct omap_hwmod omap2xxx_gpio4_hwmod = {
+ .name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio4_irqs,
+ .main_clk = "gpios_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+ },
+ },
+ .class = &omap2xxx_gpio_hwmod_class,
+ .dev_attr = &omap2xxx_gpio_dev_attr,
+};
+
+/* mcspi1 */
+static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
+ .num_chipselect = 4,
+};
+
+struct omap_hwmod omap2xxx_mcspi1_hwmod = {
+ .name = "mcspi1",
+ .mpu_irqs = omap2_mcspi1_mpu_irqs,
+ .sdma_reqs = omap2_mcspi1_sdma_reqs,
+ .main_clk = "mcspi1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_MCSPI1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_MCSPI1_SHIFT,
+ },
+ },
+ .class = &omap2xxx_mcspi_class,
+ .dev_attr = &omap_mcspi1_dev_attr,
+};
+
+/* mcspi2 */
+static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
+ .num_chipselect = 2,
+};
+
+struct omap_hwmod omap2xxx_mcspi2_hwmod = {
+ .name = "mcspi2",
+ .mpu_irqs = omap2_mcspi2_mpu_irqs,
+ .sdma_reqs = omap2_mcspi2_sdma_reqs,
+ .main_clk = "mcspi2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP24XX_EN_MCSPI2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP24XX_ST_MCSPI2_SHIFT,
+ },
+ },
+ .class = &omap2xxx_mcspi_class,
+ .dev_attr = &omap_mcspi2_dev_attr,
+};
* omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips
*
* Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
/*
* OMAP3xxx hardware module integration data
*
- * ALl of the data in this section should be autogeneratable from the
+ * All of the data in this section should be autogeneratable from the
* TI hardware database or other technical documentation. Data that
* is driver-specific or driver-kernel integration-specific belongs
* elsewhere.
*/
-static struct omap_hwmod omap3xxx_mpu_hwmod;
-static struct omap_hwmod omap3xxx_iva_hwmod;
-static struct omap_hwmod omap3xxx_l3_main_hwmod;
-static struct omap_hwmod omap3xxx_l4_core_hwmod;
-static struct omap_hwmod omap3xxx_l4_per_hwmod;
-static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
-static struct omap_hwmod omap3430es1_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_core_hwmod;
-static struct omap_hwmod omap3xxx_dss_dispc_hwmod;
-static struct omap_hwmod omap3xxx_dss_dsi1_hwmod;
-static struct omap_hwmod omap3xxx_dss_rfbi_hwmod;
-static struct omap_hwmod omap3xxx_dss_venc_hwmod;
-static struct omap_hwmod omap3xxx_i2c1_hwmod;
-static struct omap_hwmod omap3xxx_i2c2_hwmod;
-static struct omap_hwmod omap3xxx_i2c3_hwmod;
-static struct omap_hwmod omap3xxx_gpio1_hwmod;
-static struct omap_hwmod omap3xxx_gpio2_hwmod;
-static struct omap_hwmod omap3xxx_gpio3_hwmod;
-static struct omap_hwmod omap3xxx_gpio4_hwmod;
-static struct omap_hwmod omap3xxx_gpio5_hwmod;
-static struct omap_hwmod omap3xxx_gpio6_hwmod;
-static struct omap_hwmod omap34xx_sr1_hwmod;
-static struct omap_hwmod omap34xx_sr2_hwmod;
-static struct omap_hwmod omap34xx_mcspi1;
-static struct omap_hwmod omap34xx_mcspi2;
-static struct omap_hwmod omap34xx_mcspi3;
-static struct omap_hwmod omap34xx_mcspi4;
-static struct omap_hwmod omap3xxx_mmc1_hwmod;
-static struct omap_hwmod omap3xxx_mmc2_hwmod;
-static struct omap_hwmod omap3xxx_mmc3_hwmod;
-static struct omap_hwmod am35xx_usbhsotg_hwmod;
-
-static struct omap_hwmod omap3xxx_dma_system_hwmod;
-
-static struct omap_hwmod omap3xxx_mcbsp1_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
-static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
-
-/* L3 -> L4_CORE interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
- .master = &omap3xxx_l3_main_hwmod,
- .slave = &omap3xxx_l4_core_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L3 -> L4_PER interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
- .master = &omap3xxx_l3_main_hwmod,
- .slave = &omap3xxx_l4_per_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
+/*
+ * IP blocks
+ */
-/* L3 taret configuration and error log registers */
+/* L3 */
static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = {
{ .irq = INT_34XX_L3_DBG_IRQ },
{ .irq = INT_34XX_L3_APP_IRQ },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
- {
- .pa_start = 0x68000000,
- .pa_end = 0x6800ffff,
- .flags = ADDR_TYPE_RT,
- },
- { }
-};
-
-/* MPU -> L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
- .master = &omap3xxx_mpu_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .addr = omap3xxx_l3_main_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* Slave interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_slaves[] = {
- &omap3xxx_mpu__l3_main,
-};
-
-/* DSS -> l3 */
-static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
- .master = &omap3xxx_dss_core_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .fw = {
- .omap2 = {
- .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS,
- .flags = OMAP_FIREWALL_L3,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* Master interfaces on the L3 interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = {
- &omap3xxx_l3_main__l4_core,
- &omap3xxx_l3_main__l4_per,
-};
-
-/* L3 */
static struct omap_hwmod omap3xxx_l3_main_hwmod = {
.name = "l3_main",
.class = &l3_hwmod_class,
.mpu_irqs = omap3xxx_l3_main_irqs,
- .masters = omap3xxx_l3_main_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters),
- .slaves = omap3xxx_l3_main_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_l3_main_slaves),
.flags = HWMOD_NO_IDLEST,
};
-static struct omap_hwmod omap3xxx_l4_wkup_hwmod;
-static struct omap_hwmod omap3xxx_uart1_hwmod;
-static struct omap_hwmod omap3xxx_uart2_hwmod;
-static struct omap_hwmod omap3xxx_uart3_hwmod;
-static struct omap_hwmod omap3xxx_uart4_hwmod;
-static struct omap_hwmod am35xx_uart4_hwmod;
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
-
-/* l3_core -> usbhsotg interface */
-static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
- .master = &omap3xxx_usbhsotg_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
- .user = OCP_USER_MPU,
+/* L4 CORE */
+static struct omap_hwmod omap3xxx_l4_core_hwmod = {
+ .name = "l4_core",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
-/* l3_core -> am35xx_usbhsotg interface */
-static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
- .master = &am35xx_usbhsotg_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
- .user = OCP_USER_MPU,
-};
-/* L4_CORE -> L4_WKUP interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_l4_wkup_hwmod,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* L4 PER */
+static struct omap_hwmod omap3xxx_l4_per_hwmod = {
+ .name = "l4_per",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
-/* L4 CORE -> MMC1 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mmc1_hwmod,
- .clk = "mmchs1_ick",
- .addr = omap2430_mmc1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+/* L4 WKUP */
+static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
+ .name = "l4_wkup",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
-/* L4 CORE -> MMC2 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mmc2_hwmod,
- .clk = "mmchs2_ick",
- .addr = omap2430_mmc2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+/* L4 SEC */
+static struct omap_hwmod omap3xxx_l4_sec_hwmod = {
+ .name = "l4_sec",
+ .class = &l4_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
};
-/* L4 CORE -> MMC3 interface */
-static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
- {
- .pa_start = 0x480ad000,
- .pa_end = 0x480ad1ff,
- .flags = ADDR_TYPE_RT,
- },
- { }
+/* MPU */
+static struct omap_hwmod omap3xxx_mpu_hwmod = {
+ .name = "mpu",
+ .class = &mpu_hwmod_class,
+ .main_clk = "arm_fck",
};
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mmc3_hwmod,
- .clk = "mmchs3_ick",
- .addr = omap3xxx_mmc3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
- .flags = OMAP_FIREWALL_L4
+/* IVA2 (IVA2) */
+static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
+ { .name = "logic", .rst_shift = 0 },
+ { .name = "seq0", .rst_shift = 1 },
+ { .name = "seq1", .rst_shift = 2 },
};
-/* L4 CORE -> UART1 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
- {
- .pa_start = OMAP3_UART1_BASE,
- .pa_end = OMAP3_UART1_BASE + SZ_8K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
+static struct omap_hwmod omap3xxx_iva_hwmod = {
+ .name = "iva",
+ .class = &iva_hwmod_class,
+ .clkdm_name = "iva2_clkdm",
+ .rst_lines = omap3xxx_iva_resets,
+ .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets),
+ .main_clk = "iva2_ck",
};
-static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_uart1_hwmod,
- .clk = "uart1_ick",
- .addr = omap3xxx_uart1_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* timer class */
+static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* L4 CORE -> UART2 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
- {
- .pa_start = OMAP3_UART2_BASE,
- .pa_end = OMAP3_UART2_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
+static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
+ .name = "timer",
+ .sysc = &omap3xxx_timer_1ms_sysc,
+ .rev = OMAP_TIMER_IP_VERSION_1,
};
-static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_uart2_hwmod,
- .clk = "uart2_ick",
- .addr = omap3xxx_uart2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* L4 PER -> UART3 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
- {
- .pa_start = OMAP3_UART3_BASE,
- .pa_end = OMAP3_UART3_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
+static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
+ .name = "timer",
+ .sysc = &omap3xxx_timer_sysc,
+ .rev = OMAP_TIMER_IP_VERSION_1,
};
-static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_uart3_hwmod,
- .clk = "uart3_ick",
- .addr = omap3xxx_uart3_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* secure timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
+ .timer_capability = OMAP_TIMER_SECURE,
};
-/* L4 PER -> UART4 interface */
-static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = {
- {
- .pa_start = OMAP3_UART4_BASE,
- .pa_end = OMAP3_UART4_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
- },
- { }
+/* always-on timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
+ .timer_capability = OMAP_TIMER_ALWON,
};
-static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_uart4_hwmod,
- .clk = "uart4_ick",
- .addr = omap3xxx_uart4_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* pwm timers dev attribute */
+static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
+ .timer_capability = OMAP_TIMER_HAS_PWM,
};
-/* AM35xx: L4 CORE -> UART4 interface */
-static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
- {
- .pa_start = OMAP3_UART4_AM35XX_BASE,
- .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
- .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+/* timer1 */
+static struct omap_hwmod omap3xxx_timer1_hwmod = {
+ .name = "timer1",
+ .mpu_irqs = omap2_timer1_mpu_irqs,
+ .main_clk = "gpt1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT1_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
+ },
},
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_1ms_hwmod_class,
};
-static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &am35xx_uart4_hwmod,
- .clk = "uart4_ick",
- .addr = am35xx_uart4_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* L4 CORE -> I2C1 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_i2c1_hwmod,
- .clk = "i2c1_ick",
- .addr = omap2_i2c1_addr_space,
- .fw = {
+/* timer2 */
+static struct omap_hwmod omap3xxx_timer2_hwmod = {
+ .name = "timer2",
+ .mpu_irqs = omap2_timer2_mpu_irqs,
+ .main_clk = "gpt2_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
- .l4_prot_group = 7,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT2_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_1ms_hwmod_class,
};
-/* L4 CORE -> I2C2 interface */
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_i2c2_hwmod,
- .clk = "i2c2_ick",
- .addr = omap2_i2c2_addr_space,
- .fw = {
+/* timer3 */
+static struct omap_hwmod omap3xxx_timer3_hwmod = {
+ .name = "timer3",
+ .mpu_irqs = omap2_timer3_mpu_irqs,
+ .main_clk = "gpt3_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
- .l4_prot_group = 7,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT3_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/* L4 CORE -> I2C3 interface */
-static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
- {
- .pa_start = 0x48060000,
- .pa_end = 0x48060000 + SZ_128 - 1,
- .flags = ADDR_TYPE_RT,
+/* timer4 */
+static struct omap_hwmod omap3xxx_timer4_hwmod = {
+ .name = "timer4",
+ .mpu_irqs = omap2_timer4_mpu_irqs,
+ .main_clk = "gpt4_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT4_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
+ },
},
- { }
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_i2c3_hwmod,
- .clk = "i2c3_ick",
- .addr = omap3xxx_i2c3_addr_space,
- .fw = {
+/* timer5 */
+static struct omap_hwmod omap3xxx_timer5_hwmod = {
+ .name = "timer5",
+ .mpu_irqs = omap2_timer5_mpu_irqs,
+ .main_clk = "gpt5_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
- .l4_prot_group = 7,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT5_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
- { .irq = 18},
- { .irq = -1 }
-};
-
-static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
- { .irq = 19},
- { .irq = -1 }
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
- {
- .pa_start = OMAP34XX_SR1_BASE,
- .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
- .flags = ADDR_TYPE_RT,
+/* timer6 */
+static struct omap_hwmod omap3xxx_timer6_hwmod = {
+ .name = "timer6",
+ .mpu_irqs = omap2_timer6_mpu_irqs,
+ .main_clk = "gpt6_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT6_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
+ },
},
- { }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_sr1_hwmod,
- .clk = "sr_l4_ick",
- .addr = omap3_sr1_addr_space,
- .user = OCP_USER_MPU,
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/* L4 CORE -> SR1 interface */
-static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
- {
- .pa_start = OMAP34XX_SR2_BASE,
- .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
- .flags = ADDR_TYPE_RT,
+/* timer7 */
+static struct omap_hwmod omap3xxx_timer7_hwmod = {
+ .name = "timer7",
+ .mpu_irqs = omap2_timer7_mpu_irqs,
+ .main_clk = "gpt7_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT7_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
+ },
},
- { }
-};
-
-static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_sr2_hwmod,
- .clk = "sr_l4_ick",
- .addr = omap3_sr2_addr_space,
- .user = OCP_USER_MPU,
+ .dev_attr = &capability_alwon_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/*
-* usbhsotg interface data
-*/
-
-static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
- {
- .pa_start = OMAP34XX_HSUSB_OTG_BASE,
- .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
+/* timer8 */
+static struct omap_hwmod omap3xxx_timer8_hwmod = {
+ .name = "timer8",
+ .mpu_irqs = omap2_timer8_mpu_irqs,
+ .main_clk = "gpt8_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT8_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
+ },
},
- { }
-};
-
-/* l4_core -> usbhsotg */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_usbhsotg_hwmod,
- .clk = "l4_ick",
- .addr = omap3xxx_usbhsotg_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = {
- &omap3xxx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = {
- &omap3xxx_l4_core__usbhsotg,
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
- {
- .pa_start = AM35XX_IPSS_USBOTGSS_BASE,
- .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
- .flags = ADDR_TYPE_RT
+/* timer9 */
+static struct omap_hwmod omap3xxx_timer9_hwmod = {
+ .name = "timer9",
+ .mpu_irqs = omap2_timer9_mpu_irqs,
+ .main_clk = "gpt9_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT9_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
+ },
},
- { }
-};
-
-/* l4_core -> usbhsotg */
-static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &am35xx_usbhsotg_hwmod,
- .clk = "l4_ick",
- .addr = am35xx_usbhsotg_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_masters[] = {
- &am35xx_usbhsotg__l3,
-};
-
-static struct omap_hwmod_ocp_if *am35xx_usbhsotg_slaves[] = {
- &am35xx_l4_core__usbhsotg,
-};
-/* Slave interfaces on the L4_CORE interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
- &omap3xxx_l3_main__l4_core,
-};
-
-/* L4 CORE */
-static struct omap_hwmod omap3xxx_l4_core_hwmod = {
- .name = "l4_core",
- .class = &l4_hwmod_class,
- .slaves = omap3xxx_l4_core_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_core_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_PER interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_per_slaves[] = {
- &omap3xxx_l3_main__l4_per,
-};
-
-/* L4 PER */
-static struct omap_hwmod omap3xxx_l4_per_hwmod = {
- .name = "l4_per",
- .class = &l4_hwmod_class,
- .slaves = omap3xxx_l4_per_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_per_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* Slave interfaces on the L4_WKUP interconnect */
-static struct omap_hwmod_ocp_if *omap3xxx_l4_wkup_slaves[] = {
- &omap3xxx_l4_core__l4_wkup,
-};
-
-/* L4 WKUP */
-static struct omap_hwmod omap3xxx_l4_wkup_hwmod = {
- .name = "l4_wkup",
- .class = &l4_hwmod_class,
- .slaves = omap3xxx_l4_wkup_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_l4_wkup_slaves),
- .flags = HWMOD_NO_IDLEST,
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/* Master interfaces on the MPU device */
-static struct omap_hwmod_ocp_if *omap3xxx_mpu_masters[] = {
- &omap3xxx_mpu__l3_main,
+/* timer10 */
+static struct omap_hwmod omap3xxx_timer10_hwmod = {
+ .name = "timer10",
+ .mpu_irqs = omap2_timer10_mpu_irqs,
+ .main_clk = "gpt10_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT10_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap3xxx_timer_1ms_hwmod_class,
};
-/* MPU */
-static struct omap_hwmod omap3xxx_mpu_hwmod = {
- .name = "mpu",
- .class = &mpu_hwmod_class,
- .main_clk = "arm_fck",
- .masters = omap3xxx_mpu_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_mpu_masters),
+/* timer11 */
+static struct omap_hwmod omap3xxx_timer11_hwmod = {
+ .name = "timer11",
+ .mpu_irqs = omap2_timer11_mpu_irqs,
+ .main_clk = "gpt11_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT11_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
+ },
+ },
+ .dev_attr = &capability_pwm_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
-/*
- * IVA2_2 interface data
- */
-
-/* IVA2 <- L3 interface */
-static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
- .master = &omap3xxx_l3_main_hwmod,
- .slave = &omap3xxx_iva_hwmod,
- .clk = "iva2_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* timer12 */
+static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
+ { .irq = 95, },
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if *omap3xxx_iva_masters[] = {
- &omap3xxx_l3__iva,
+static struct omap_hwmod omap3xxx_timer12_hwmod = {
+ .name = "timer12",
+ .mpu_irqs = omap3xxx_timer12_mpu_irqs,
+ .main_clk = "gpt12_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPT12_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
+ },
+ },
+ .dev_attr = &capability_secure_dev_attr,
+ .class = &omap3xxx_timer_hwmod_class,
};
/*
- * IVA2 (IVA2)
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
*/
-static struct omap_hwmod omap3xxx_iva_hwmod = {
- .name = "iva",
- .class = &iva_hwmod_class,
- .masters = omap3xxx_iva_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_iva_masters),
-};
-
-/* timer class */
-static struct omap_hwmod_class_sysconfig omap3xxx_timer_1ms_sysc = {
+static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+ SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_timer_1ms_hwmod_class = {
- .name = "timer",
- .sysc = &omap3xxx_timer_1ms_sysc,
- .rev = OMAP_TIMER_IP_VERSION_1,
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_class_sysconfig omap3xxx_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x20,
+ .syss_offs = 0x10,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+ .clockact = CLOCKACT_TEST_ICLK,
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_class omap3xxx_timer_hwmod_class = {
- .name = "timer",
- .sysc = &omap3xxx_timer_sysc,
- .rev = OMAP_TIMER_IP_VERSION_1,
+static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
+ .name = "wd_timer",
+ .sysc = &omap3xxx_wd_timer_sysc,
+ .pre_shutdown = &omap2_wd_timer_disable
};
-/* secure timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_secure_dev_attr = {
- .timer_capability = OMAP_TIMER_SECURE,
+static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
+ .name = "wd_timer2",
+ .class = &omap3xxx_wd_timer_hwmod_class,
+ .main_clk = "wdt2_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_WDT2_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
+ },
+ },
+ /*
+ * XXX: Use software supervised mode, HW supervised smartidle seems to
+ * block CORE power domain idle transitions. Maybe a HW bug in wdt2?
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
};
-/* always-on timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
- .timer_capability = OMAP_TIMER_ALWON,
+/* UART1 */
+static struct omap_hwmod omap3xxx_uart1_hwmod = {
+ .name = "uart1",
+ .mpu_irqs = omap2_uart1_mpu_irqs,
+ .sdma_reqs = omap2_uart1_sdma_reqs,
+ .main_clk = "uart1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
+ },
+ },
+ .class = &omap2_uart_class,
};
-/* pwm timers dev attribute */
-static struct omap_timer_capability_dev_attr capability_pwm_dev_attr = {
- .timer_capability = OMAP_TIMER_HAS_PWM,
+/* UART2 */
+static struct omap_hwmod omap3xxx_uart2_hwmod = {
+ .name = "uart2",
+ .mpu_irqs = omap2_uart2_mpu_irqs,
+ .sdma_reqs = omap2_uart2_sdma_reqs,
+ .main_clk = "uart2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
+ },
+ },
+ .class = &omap2_uart_class,
};
-/* timer1 */
-static struct omap_hwmod omap3xxx_timer1_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
- {
- .pa_start = 0x48318000,
- .pa_end = 0x48318000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
+/* UART3 */
+static struct omap_hwmod omap3xxx_uart3_hwmod = {
+ .name = "uart3",
+ .mpu_irqs = omap2_uart3_mpu_irqs,
+ .sdma_reqs = omap2_uart3_sdma_reqs,
+ .main_clk = "uart3_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430_PER_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART3_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
+ },
},
- { }
+ .class = &omap2_uart_class,
};
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
- .master = &omap3xxx_l4_wkup_hwmod,
- .slave = &omap3xxx_timer1_hwmod,
- .clk = "gpt1_ick",
- .addr = omap3xxx_timer1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* UART4 */
+static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
+ { .irq = INT_36XX_UART4_IRQ, },
+ { .irq = -1 }
};
-/* timer1 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = {
- &omap3xxx_l4_wkup__timer1,
+static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
+ { .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, },
+ { .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, },
+ { .dma_req = -1 }
};
-/* timer1 hwmod */
-static struct omap_hwmod omap3xxx_timer1_hwmod = {
- .name = "timer1",
- .mpu_irqs = omap2_timer1_mpu_irqs,
- .main_clk = "gpt1_fck",
+static struct omap_hwmod omap36xx_uart4_hwmod = {
+ .name = "uart4",
+ .mpu_irqs = uart4_mpu_irqs,
+ .sdma_reqs = uart4_sdma_reqs,
+ .main_clk = "uart4_fck",
.prcm = {
.omap2 = {
+ .module_offs = OMAP3430_PER_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT1_SHIFT,
- .module_offs = WKUP_MOD,
+ .module_bit = OMAP3630_EN_UART4_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT1_SHIFT,
+ .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer1_slaves),
- .class = &omap3xxx_timer_1ms_hwmod_class,
+ .class = &omap2_uart_class,
};
-/* timer2 */
-static struct omap_hwmod omap3xxx_timer2_hwmod;
+static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
+ { .irq = INT_35XX_UART4_IRQ, },
+};
-static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
- {
- .pa_start = 0x49032000,
- .pa_end = 0x49032000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
+ { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
+ { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod am35xx_uart4_hwmod = {
+ .name = "uart4",
+ .mpu_irqs = am35xx_uart4_mpu_irqs,
+ .sdma_reqs = am35xx_uart4_sdma_reqs,
+ .main_clk = "uart4_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ },
},
- { }
+ .class = &omap2_uart_class,
};
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer2_hwmod,
- .clk = "gpt2_ick",
- .addr = omap3xxx_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class i2c_class = {
+ .name = "i2c",
+ .sysc = &i2c_sysc,
+ .rev = OMAP_I2C_IP_VERSION_1,
+ .reset = &omap_i2c_reset,
};
-/* timer2 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = {
- &omap3xxx_l4_per__timer2,
+static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
+ { .name = "dispc", .dma_req = 5 },
+ { .name = "dsi1", .dma_req = 74 },
+ { .dma_req = -1 }
+};
+
+/* dss */
+static struct omap_hwmod_opt_clk dss_opt_clks[] = {
+ /*
+ * The DSS HW needs all DSS clocks enabled during reset. The dss_core
+ * driver does not use these clocks.
+ */
+ { .role = "sys_clk", .clk = "dss2_alwon_fck" },
+ { .role = "tv_clk", .clk = "dss_tv_fck" },
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
-/* timer2 hwmod */
-static struct omap_hwmod omap3xxx_timer2_hwmod = {
- .name = "timer2",
- .mpu_irqs = omap2_timer2_mpu_irqs,
- .main_clk = "gpt2_fck",
+static struct omap_hwmod omap3430es1_dss_core_hwmod = {
+ .name = "dss_core",
+ .class = &omap2_dss_hwmod_class,
+ .main_clk = "dss1_alwon_fck", /* instead of dss_fck */
+ .sdma_reqs = omap3xxx_dss_sdma_chs,
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT2_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT2_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer2_slaves),
- .class = &omap3xxx_timer_1ms_hwmod_class,
-};
-
-/* timer3 */
-static struct omap_hwmod omap3xxx_timer3_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
- {
- .pa_start = 0x49034000,
- .pa_end = 0x49034000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer3_hwmod,
- .clk = "gpt3_ick",
- .addr = omap3xxx_timer3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = {
- &omap3xxx_l4_per__timer3,
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
+ .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
-/* timer3 hwmod */
-static struct omap_hwmod omap3xxx_timer3_hwmod = {
- .name = "timer3",
- .mpu_irqs = omap2_timer3_mpu_irqs,
- .main_clk = "gpt3_fck",
+static struct omap_hwmod omap3xxx_dss_core_hwmod = {
+ .name = "dss_core",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .class = &omap2_dss_hwmod_class,
+ .main_clk = "dss1_alwon_fck", /* instead of dss_fck */
+ .sdma_reqs = omap3xxx_dss_sdma_chs,
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT3_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT3_SHIFT,
+ .idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer3_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .opt_clks = dss_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
};
-/* timer4 */
-static struct omap_hwmod omap3xxx_timer4_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
- {
- .pa_start = 0x49036000,
- .pa_end = 0x49036000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
+/*
+ * 'dispc' class
+ * display controller
+ */
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer4_hwmod,
- .clk = "gpt4_ick",
- .addr = omap3xxx_timer4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSC_HAS_ENAWAKEUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* timer4 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = {
- &omap3xxx_l4_per__timer4,
+static struct omap_hwmod_class omap3_dispc_hwmod_class = {
+ .name = "dispc",
+ .sysc = &omap3_dispc_sysc,
};
-/* timer4 hwmod */
-static struct omap_hwmod omap3xxx_timer4_hwmod = {
- .name = "timer4",
- .mpu_irqs = omap2_timer4_mpu_irqs,
- .main_clk = "gpt4_fck",
+static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
+ .name = "dss_dispc",
+ .class = &omap3_dispc_hwmod_class,
+ .mpu_irqs = omap2_dispc_irqs,
+ .main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT4_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT4_SHIFT,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer4_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .flags = HWMOD_NO_IDLEST,
+ .dev_attr = &omap2_3_dss_dispc_dev_attr
};
-/* timer5 */
-static struct omap_hwmod omap3xxx_timer5_hwmod;
+/*
+ * 'dsi' class
+ * display serial interface controller
+ */
-static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
- {
- .pa_start = 0x49038000,
- .pa_end = 0x49038000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
+ .name = "dsi",
};
-/* l4_per -> timer5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer5_hwmod,
- .clk = "gpt5_ick",
- .addr = omap3xxx_timer5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
+ { .irq = 25 },
+ { .irq = -1 }
};
-/* timer5 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = {
- &omap3xxx_l4_per__timer5,
+/* dss_dsi1 */
+static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss2_alwon_fck" },
};
-/* timer5 hwmod */
-static struct omap_hwmod omap3xxx_timer5_hwmod = {
- .name = "timer5",
- .mpu_irqs = omap2_timer5_mpu_irqs,
- .main_clk = "gpt5_fck",
+static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
+ .name = "dss_dsi1",
+ .class = &omap3xxx_dsi_hwmod_class,
+ .mpu_irqs = omap3xxx_dsi1_irqs,
+ .main_clk = "dss1_alwon_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT5_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT5_SHIFT,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer5_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .opt_clks = dss_dsi1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
+ .flags = HWMOD_NO_IDLEST,
};
-/* timer6 */
-static struct omap_hwmod omap3xxx_timer6_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
- {
- .pa_start = 0x4903A000,
- .pa_end = 0x4903A000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
+ { .role = "ick", .clk = "dss_ick" },
};
-/* l4_per -> timer6 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer6_hwmod,
- .clk = "gpt6_ick",
- .addr = omap3xxx_timer6_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
+ .name = "dss_rfbi",
+ .class = &omap2_rfbi_hwmod_class,
+ .main_clk = "dss1_alwon_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
+ },
+ },
+ .opt_clks = dss_rfbi_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+ .flags = HWMOD_NO_IDLEST,
};
-/* timer6 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = {
- &omap3xxx_l4_per__timer6,
+static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
+ /* required only on OMAP3430 */
+ { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
};
-/* timer6 hwmod */
-static struct omap_hwmod omap3xxx_timer6_hwmod = {
- .name = "timer6",
- .mpu_irqs = omap2_timer6_mpu_irqs,
- .main_clk = "gpt6_fck",
+static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
+ .name = "dss_venc",
+ .class = &omap2_venc_hwmod_class,
+ .main_clk = "dss_tv_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT6_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT6_SHIFT,
+ .module_bit = OMAP3430_EN_DSS1_SHIFT,
+ .module_offs = OMAP3430_DSS_MOD,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer6_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .opt_clks = dss_venc_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
+ .flags = HWMOD_NO_IDLEST,
};
-/* timer7 */
-static struct omap_hwmod omap3xxx_timer7_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
- {
- .pa_start = 0x4903C000,
- .pa_end = 0x4903C000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* I2C1 */
+static struct omap_i2c_dev_attr i2c1_dev_attr = {
+ .fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
-/* l4_per -> timer7 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer7_hwmod,
- .clk = "gpt7_ick",
- .addr = omap3xxx_timer7_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod omap3xxx_i2c1_hwmod = {
+ .name = "i2c1",
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .mpu_irqs = omap2_i2c1_mpu_irqs,
+ .sdma_reqs = omap2_i2c1_sdma_reqs,
+ .main_clk = "i2c1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_I2C1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
+ },
+ },
+ .class = &i2c_class,
+ .dev_attr = &i2c1_dev_attr,
};
-/* timer7 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = {
- &omap3xxx_l4_per__timer7,
+/* I2C2 */
+static struct omap_i2c_dev_attr i2c2_dev_attr = {
+ .fifo_depth = 8, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
-/* timer7 hwmod */
-static struct omap_hwmod omap3xxx_timer7_hwmod = {
- .name = "timer7",
- .mpu_irqs = omap2_timer7_mpu_irqs,
- .main_clk = "gpt7_fck",
+static struct omap_hwmod omap3xxx_i2c2_hwmod = {
+ .name = "i2c2",
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .mpu_irqs = omap2_i2c2_mpu_irqs,
+ .sdma_reqs = omap2_i2c2_sdma_reqs,
+ .main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT7_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_I2C2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT7_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
},
},
- .dev_attr = &capability_alwon_dev_attr,
- .slaves = omap3xxx_timer7_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer7_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .class = &i2c_class,
+ .dev_attr = &i2c2_dev_attr,
};
-/* timer8 */
-static struct omap_hwmod omap3xxx_timer8_hwmod;
-
-static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
- {
- .pa_start = 0x4903E000,
- .pa_end = 0x4903E000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* I2C3 */
+static struct omap_i2c_dev_attr i2c3_dev_attr = {
+ .fifo_depth = 64, /* bytes */
+ .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
+ OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
+ OMAP_I2C_FLAG_BUS_SHIFT_2,
};
-/* l4_per -> timer8 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer8_hwmod,
- .clk = "gpt8_ick",
- .addr = omap3xxx_timer8_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
+ { .irq = INT_34XX_I2C3_IRQ, },
+ { .irq = -1 }
};
-/* timer8 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = {
- &omap3xxx_l4_per__timer8,
+static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
+ { .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX },
+ { .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX },
+ { .dma_req = -1 }
};
-/* timer8 hwmod */
-static struct omap_hwmod omap3xxx_timer8_hwmod = {
- .name = "timer8",
- .mpu_irqs = omap2_timer8_mpu_irqs,
- .main_clk = "gpt8_fck",
+static struct omap_hwmod omap3xxx_i2c3_hwmod = {
+ .name = "i2c3",
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
+ .mpu_irqs = i2c3_mpu_irqs,
+ .sdma_reqs = i2c3_sdma_reqs,
+ .main_clk = "i2c3_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT8_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_I2C3_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT8_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap3xxx_timer8_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer8_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .class = &i2c_class,
+ .dev_attr = &i2c3_dev_attr,
};
-/* timer9 */
-static struct omap_hwmod omap3xxx_timer9_hwmod;
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
-static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
- {
- .pa_start = 0x49040000,
- .pa_end = 0x49040000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
- },
- { }
+static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_timer9_hwmod,
- .clk = "gpt9_ick",
- .addr = omap3xxx_timer9_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
+ .name = "gpio",
+ .sysc = &omap3xxx_gpio_sysc,
+ .rev = 1,
};
-/* timer9 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = {
- &omap3xxx_l4_per__timer9,
+/* gpio_dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+ .bank_width = 32,
+ .dbck_flag = true,
};
-/* timer9 hwmod */
-static struct omap_hwmod omap3xxx_timer9_hwmod = {
- .name = "timer9",
- .mpu_irqs = omap2_timer9_mpu_irqs,
- .main_clk = "gpt9_fck",
+/* gpio1 */
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio1_dbck", },
+};
+
+static struct omap_hwmod omap3xxx_gpio1_hwmod = {
+ .name = "gpio1",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio1_irqs,
+ .main_clk = "gpio1_ick",
+ .opt_clks = gpio1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT9_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_GPIO1_SHIFT,
+ .module_offs = WKUP_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT9_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap3xxx_timer9_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer9_slaves),
- .class = &omap3xxx_timer_hwmod_class,
-};
-
-/* timer10 */
-static struct omap_hwmod omap3xxx_timer10_hwmod;
-
-/* l4_core -> timer10 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_timer10_hwmod,
- .clk = "gpt10_ick",
- .addr = omap2_timer10_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* timer10 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = {
- &omap3xxx_l4_core__timer10,
+/* gpio2 */
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio2_dbck", },
};
-/* timer10 hwmod */
-static struct omap_hwmod omap3xxx_timer10_hwmod = {
- .name = "timer10",
- .mpu_irqs = omap2_timer10_mpu_irqs,
- .main_clk = "gpt10_fck",
+static struct omap_hwmod omap3xxx_gpio2_hwmod = {
+ .name = "gpio2",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio2_irqs,
+ .main_clk = "gpio2_ick",
+ .opt_clks = gpio2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT10_SHIFT,
- .module_offs = CORE_MOD,
+ .module_bit = OMAP3430_EN_GPIO2_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap3xxx_timer10_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer10_slaves),
- .class = &omap3xxx_timer_1ms_hwmod_class,
-};
-
-/* timer11 */
-static struct omap_hwmod omap3xxx_timer11_hwmod;
-
-/* l4_core -> timer11 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_timer11_hwmod,
- .clk = "gpt11_ick",
- .addr = omap2_timer11_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* timer11 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = {
- &omap3xxx_l4_core__timer11,
+/* gpio3 */
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio3_dbck", },
};
-/* timer11 hwmod */
-static struct omap_hwmod omap3xxx_timer11_hwmod = {
- .name = "timer11",
- .mpu_irqs = omap2_timer11_mpu_irqs,
- .main_clk = "gpt11_fck",
+static struct omap_hwmod omap3xxx_gpio3_hwmod = {
+ .name = "gpio3",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio3_irqs,
+ .main_clk = "gpio3_ick",
+ .opt_clks = gpio3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT11_SHIFT,
- .module_offs = CORE_MOD,
+ .module_bit = OMAP3430_EN_GPIO3_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT11_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
},
},
- .dev_attr = &capability_pwm_dev_attr,
- .slaves = omap3xxx_timer11_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer11_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* timer12*/
-static struct omap_hwmod omap3xxx_timer12_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = {
- { .irq = 95, },
- { .irq = -1 }
+/* gpio4 */
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio4_dbck", },
};
-static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
- {
- .pa_start = 0x48304000,
- .pa_end = 0x48304000 + SZ_1K - 1,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap3xxx_gpio4_hwmod = {
+ .name = "gpio4",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap2_gpio4_irqs,
+ .main_clk = "gpio4_ick",
+ .opt_clks = gpio4_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO4_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
+ },
},
- { }
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* l4_core -> timer12 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_timer12_hwmod,
- .clk = "gpt12_ick",
- .addr = omap3xxx_timer12_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* gpio5 */
+static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
+ { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+ { .irq = -1 }
};
-/* timer12 slave port */
-static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = {
- &omap3xxx_l4_core__timer12,
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio5_dbck", },
};
-/* timer12 hwmod */
-static struct omap_hwmod omap3xxx_timer12_hwmod = {
- .name = "timer12",
- .mpu_irqs = omap3xxx_timer12_mpu_irqs,
- .main_clk = "gpt12_fck",
+static struct omap_hwmod omap3xxx_gpio5_hwmod = {
+ .name = "gpio5",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap3xxx_gpio5_irqs,
+ .main_clk = "gpio5_ick",
+ .opt_clks = gpio5_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPT12_SHIFT,
- .module_offs = WKUP_MOD,
+ .module_bit = OMAP3430_EN_GPIO5_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPT12_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
},
},
- .dev_attr = &capability_secure_dev_attr,
- .slaves = omap3xxx_timer12_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_timer12_slaves),
- .class = &omap3xxx_timer_hwmod_class,
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
- {
- .pa_start = 0x48314000,
- .pa_end = 0x4831407f,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* gpio6 */
+static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
+ { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
- .master = &omap3xxx_l4_wkup_hwmod,
- .slave = &omap3xxx_wd_timer2_hwmod,
- .clk = "wdt2_ick",
- .addr = omap3xxx_wd_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+ { .role = "dbclk", .clk = "gpio6_dbck", },
};
-/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
- */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+static struct omap_hwmod omap3xxx_gpio6_hwmod = {
+ .name = "gpio6",
+ .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+ .mpu_irqs = omap3xxx_gpio6_irqs,
+ .main_clk = "gpio6_ick",
+ .opt_clks = gpio6_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_GPIO6_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
+ },
+ },
+ .class = &omap3xxx_gpio_hwmod_class,
+ .dev_attr = &gpio_dev_attr,
};
-/* I2C common */
-static struct omap_hwmod_class_sysconfig i2c_sysc = {
- .rev_offs = 0x00,
- .sysc_offs = 0x20,
- .syss_offs = 0x10,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .clockact = CLOCKACT_TEST_ICLK,
- .sysc_fields = &omap_hwmod_sysc_type1,
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+ .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+ IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+ .lch_count = 32,
};
-static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
- .name = "wd_timer",
- .sysc = &omap3xxx_wd_timer_sysc,
- .pre_shutdown = &omap2_wd_timer_disable
+static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x002c,
+ .syss_offs = 0x0028,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
+ SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* wd_timer2 */
-static struct omap_hwmod_ocp_if *omap3xxx_wd_timer2_slaves[] = {
- &omap3xxx_l4_wkup__wd_timer2,
+static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
+ .name = "dma",
+ .sysc = &omap3xxx_dma_sysc,
};
-static struct omap_hwmod omap3xxx_wd_timer2_hwmod = {
- .name = "wd_timer2",
- .class = &omap3xxx_wd_timer_hwmod_class,
- .main_clk = "wdt2_fck",
- .prcm = {
+/* dma_system */
+static struct omap_hwmod omap3xxx_dma_system_hwmod = {
+ .name = "dma",
+ .class = &omap3xxx_dma_hwmod_class,
+ .mpu_irqs = omap2_dma_system_irqs,
+ .main_clk = "core_l3_ick",
+ .prcm = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_WDT2_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_WDT2_SHIFT,
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_ST_SDMA_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT,
},
},
- .slaves = omap3xxx_wd_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
- /*
- * XXX: Use software supervised mode, HW supervised smartidle seems to
- * block CORE power domain idle transitions. Maybe a HW bug in wdt2?
- */
- .flags = HWMOD_SWSUP_SIDLE,
+ .dev_attr = &dma_dev_attr,
+ .flags = HWMOD_NO_IDLEST,
};
-/* UART1 */
+/*
+ * 'mcbsp' class
+ * multi channel buffered serial port controller
+ */
-static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = {
- &omap3_l4_core__uart1,
+static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
+ .sysc_offs = 0x008c,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+ .clockact = 0x2,
};
-static struct omap_hwmod omap3xxx_uart1_hwmod = {
- .name = "uart1",
- .mpu_irqs = omap2_uart1_mpu_irqs,
- .sdma_reqs = omap2_uart1_sdma_reqs,
- .main_clk = "uart1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART1_SHIFT,
- },
- },
- .slaves = omap3xxx_uart1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves),
- .class = &omap2_uart_class,
+static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
+ .name = "mcbsp",
+ .sysc = &omap3xxx_mcbsp_sysc,
+ .rev = MCBSP_CONFIG_TYPE3,
};
-/* UART2 */
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = {
- &omap3_l4_core__uart2,
+/* mcbsp1 */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
+ { .name = "irq", .irq = 16 },
+ { .name = "tx", .irq = 59 },
+ { .name = "rx", .irq = 60 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap3xxx_uart2_hwmod = {
- .name = "uart2",
- .mpu_irqs = omap2_uart2_mpu_irqs,
- .sdma_reqs = omap2_uart2_sdma_reqs,
- .main_clk = "uart2_fck",
+static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
+ .name = "mcbsp1",
+ .class = &omap3xxx_mcbsp_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp1_irqs,
+ .sdma_reqs = omap2_mcbsp1_sdma_reqs,
+ .main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
- .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART2_SHIFT,
+ .module_bit = OMAP3430_EN_MCBSP1_SHIFT,
+ .module_offs = CORE_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART2_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
},
},
- .slaves = omap3xxx_uart2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves),
- .class = &omap2_uart_class,
};
-/* UART3 */
+/* mcbsp2 */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
+ { .name = "irq", .irq = 17 },
+ { .name = "tx", .irq = 62 },
+ { .name = "rx", .irq = 63 },
+ { .irq = -1 }
+};
-static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = {
- &omap3_l4_per__uart3,
+static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
+ .sidetone = "mcbsp2_sidetone",
};
-static struct omap_hwmod omap3xxx_uart3_hwmod = {
- .name = "uart3",
- .mpu_irqs = omap2_uart3_mpu_irqs,
- .sdma_reqs = omap2_uart3_sdma_reqs,
- .main_clk = "uart3_fck",
+static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
+ .name = "mcbsp2",
+ .class = &omap3xxx_mcbsp_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp2_irqs,
+ .sdma_reqs = omap2_mcbsp2_sdma_reqs,
+ .main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
- .module_offs = OMAP3430_PER_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART3_SHIFT,
+ .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART3_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
},
},
- .slaves = omap3xxx_uart3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves),
- .class = &omap2_uart_class,
+ .dev_attr = &omap34xx_mcbsp2_dev_attr,
};
-/* UART4 */
-
-static struct omap_hwmod_irq_info uart4_mpu_irqs[] = {
- { .irq = INT_36XX_UART4_IRQ, },
+/* mcbsp3 */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
+ { .name = "irq", .irq = 22 },
+ { .name = "tx", .irq = 89 },
+ { .name = "rx", .irq = 90 },
{ .irq = -1 }
};
-static struct omap_hwmod_dma_info uart4_sdma_reqs[] = {
- { .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, },
- { .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, },
- { .dma_req = -1 }
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = {
- &omap3_l4_per__uart4,
+static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
+ .sidetone = "mcbsp3_sidetone",
};
-static struct omap_hwmod omap3xxx_uart4_hwmod = {
- .name = "uart4",
- .mpu_irqs = uart4_mpu_irqs,
- .sdma_reqs = uart4_sdma_reqs,
- .main_clk = "uart4_fck",
+static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
+ .name = "mcbsp3",
+ .class = &omap3xxx_mcbsp_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp3_irqs,
+ .sdma_reqs = omap2_mcbsp3_sdma_reqs,
+ .main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
- .module_offs = OMAP3430_PER_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3630_EN_UART4_SHIFT,
+ .module_bit = OMAP3430_EN_MCBSP3_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3630_EN_UART4_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
},
},
- .slaves = omap3xxx_uart4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves),
- .class = &omap2_uart_class,
-};
-
-static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
- { .irq = INT_35XX_UART4_IRQ, },
+ .dev_attr = &omap34xx_mcbsp3_dev_attr,
};
-static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
- { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
- { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+/* mcbsp4 */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
+ { .name = "irq", .irq = 23 },
+ { .name = "tx", .irq = 54 },
+ { .name = "rx", .irq = 55 },
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
- &am35xx_l4_core__uart4,
+static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
+ { .name = "rx", .dma_req = 20 },
+ { .name = "tx", .dma_req = 19 },
+ { .dma_req = -1 }
};
-static struct omap_hwmod am35xx_uart4_hwmod = {
- .name = "uart4",
- .mpu_irqs = am35xx_uart4_mpu_irqs,
- .sdma_reqs = am35xx_uart4_sdma_reqs,
- .main_clk = "uart4_fck",
- .prcm = {
+static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
+ .name = "mcbsp4",
+ .class = &omap3xxx_mcbsp_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp4_irqs,
+ .sdma_reqs = omap3xxx_mcbsp4_sdma_chs,
+ .main_clk = "mcbsp4_fck",
+ .prcm = {
.omap2 = {
- .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .module_bit = OMAP3430_EN_MCBSP4_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
},
},
- .slaves = am35xx_uart4_slaves,
- .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves),
- .class = &omap2_uart_class,
};
-
-static struct omap_hwmod_class i2c_class = {
- .name = "i2c",
- .sysc = &i2c_sysc,
- .rev = OMAP_I2C_IP_VERSION_1,
- .reset = &omap_i2c_reset,
+/* mcbsp5 */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
+ { .name = "irq", .irq = 27 },
+ { .name = "tx", .irq = 81 },
+ { .name = "rx", .irq = 82 },
+ { .irq = -1 }
};
-static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = {
- { .name = "dispc", .dma_req = 5 },
- { .name = "dsi1", .dma_req = 74 },
+static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
+ { .name = "rx", .dma_req = 22 },
+ { .name = "tx", .dma_req = 21 },
{ .dma_req = -1 }
};
-/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = {
- &omap3xxx_dss__l3,
-};
-
-/* l4_core -> dss */
-static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3430es1_dss_core_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
- .flags = OMAP_FIREWALL_L4,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dss_core_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_addrs,
- .fw = {
+static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
+ .name = "mcbsp5",
+ .class = &omap3xxx_mcbsp_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp5_irqs,
+ .sdma_reqs = omap3xxx_mcbsp5_sdma_chs,
+ .main_clk = "mcbsp5_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_MCBSP5_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap3430es1_dss_slaves[] = {
- &omap3430es1_l4_core__dss,
+/* 'mcbsp sidetone' class */
+static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = {
+ .sysc_offs = 0x0010,
+ .sysc_flags = SYSC_HAS_AUTOIDLE,
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_ocp_if *omap3xxx_dss_slaves[] = {
- &omap3xxx_l4_core__dss,
+static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
+ .name = "mcbsp_sidetone",
+ .sysc = &omap3xxx_mcbsp_sidetone_sysc,
};
-static struct omap_hwmod_opt_clk dss_opt_clks[] = {
- /*
- * The DSS HW needs all DSS clocks enabled during reset. The dss_core
- * driver does not use these clocks.
- */
- { .role = "sys_clk", .clk = "dss2_alwon_fck" },
- { .role = "tv_clk", .clk = "dss_tv_fck" },
- /* required only on OMAP3430 */
- { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+/* mcbsp2_sidetone */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
+ { .name = "irq", .irq = 4 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap3430es1_dss_core_hwmod = {
- .name = "dss_core",
- .class = &omap2_dss_hwmod_class,
- .main_clk = "dss1_alwon_fck", /* instead of dss_fck */
- .sdma_reqs = omap3xxx_dss_sdma_chs,
+static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
+ .name = "mcbsp2_sidetone",
+ .class = &omap3xxx_mcbsp_sidetone_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs,
+ .main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
+ .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_stdby_bit = OMAP3430ES1_ST_DSS_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
},
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .slaves = omap3430es1_dss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3430es1_dss_slaves),
- .masters = omap3xxx_dss_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
- .flags = HWMOD_NO_IDLEST | HWMOD_CONTROL_OPT_CLKS_IN_RESET,
};
-static struct omap_hwmod omap3xxx_dss_core_hwmod = {
- .name = "dss_core",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .class = &omap2_dss_hwmod_class,
- .main_clk = "dss1_alwon_fck", /* instead of dss_fck */
- .sdma_reqs = omap3xxx_dss_sdma_chs,
+/* mcbsp3_sidetone */
+static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
+ { .name = "irq", .irq = 5 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
+ .name = "mcbsp3_sidetone",
+ .class = &omap3xxx_mcbsp_sidetone_hwmod_class,
+ .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs,
+ .main_clk = "mcbsp3_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
+ .module_bit = OMAP3430_EN_MCBSP3_SHIFT,
+ .module_offs = OMAP3430_PER_MOD,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT,
- .idlest_stdby_bit = OMAP3430ES2_ST_DSS_STDBY_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
},
},
- .opt_clks = dss_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .slaves = omap3xxx_dss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_slaves),
- .masters = omap3xxx_dss_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
-/*
- * 'dispc' class
- * display controller
- */
-
-static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSC_HAS_ENAWAKEUP),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+/* SR common */
+static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
+ .clkact_shift = 20,
};
-static struct omap_hwmod_class omap3_dispc_hwmod_class = {
- .name = "dispc",
- .sysc = &omap3_dispc_sysc,
+static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
+ .sysc_offs = 0x24,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
+ .clockact = CLOCKACT_TEST_ICLK,
+ .sysc_fields = &omap34xx_sr_sysc_fields,
};
-/* l4_core -> dss_dispc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dss_dispc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_dispc_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
- .flags = OMAP_FIREWALL_L4,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
+ .name = "smartreflex",
+ .sysc = &omap34xx_sr_sysc,
+ .rev = 1,
};
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
- &omap3xxx_l4_core__dss_dispc,
+static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
+ .sidle_shift = 24,
+ .enwkup_shift = 26,
};
-static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
- .name = "dss_dispc",
- .class = &omap3_dispc_hwmod_class,
- .mpu_irqs = omap2_dispc_irqs,
- .main_clk = "dss1_alwon_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
- },
- },
- .slaves = omap3xxx_dss_dispc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_slaves),
- .flags = HWMOD_NO_IDLEST,
- .dev_attr = &omap2_3_dss_dispc_dev_attr
+static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
+ .sysc_offs = 0x38,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_NO_CACHE),
+ .sysc_fields = &omap36xx_sr_sysc_fields,
};
-/*
- * 'dsi' class
- * display serial interface controller
- */
+static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
+ .name = "smartreflex",
+ .sysc = &omap36xx_sr_sysc,
+ .rev = 2,
+};
-static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = {
- .name = "dsi",
+/* SR1 */
+static struct omap_smartreflex_dev_attr sr1_dev_attr = {
+ .sensor_voltdm_name = "mpu_iva",
};
-static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = {
- { .irq = 25 },
+static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
+ { .irq = 18 },
{ .irq = -1 }
};
-/* dss_dsi1 */
-static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
- {
- .pa_start = 0x4804FC00,
- .pa_end = 0x4804FFFF,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap34xx_sr1_hwmod = {
+ .name = "sr1",
+ .class = &omap34xx_smartreflex_hwmod_class,
+ .main_clk = "sr1_fck",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SR1_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+ },
},
- { }
+ .dev_attr = &sr1_dev_attr,
+ .mpu_irqs = omap3_smartreflex_mpu_irqs,
+ .flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
-/* l4_core -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dss_dsi1_hwmod,
- .clk = "dss_ick",
- .addr = omap3xxx_dss_dsi1_addrs,
- .fw = {
+static struct omap_hwmod omap36xx_sr1_hwmod = {
+ .name = "sr1",
+ .class = &omap36xx_smartreflex_hwmod_class,
+ .main_clk = "sr1_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SR1_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .dev_attr = &sr1_dev_attr,
+ .mpu_irqs = omap3_smartreflex_mpu_irqs,
};
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_dsi1_slaves[] = {
- &omap3xxx_l4_core__dss_dsi1,
+/* SR2 */
+static struct omap_smartreflex_dev_attr sr2_dev_attr = {
+ .sensor_voltdm_name = "core",
};
-static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
- { .role = "sys_clk", .clk = "dss2_alwon_fck" },
+static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
+ { .irq = 19 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = {
- .name = "dss_dsi1",
- .class = &omap3xxx_dsi_hwmod_class,
- .mpu_irqs = omap3xxx_dsi1_irqs,
- .main_clk = "dss1_alwon_fck",
+static struct omap_hwmod omap34xx_sr2_hwmod = {
+ .name = "sr2",
+ .class = &omap34xx_smartreflex_hwmod_class,
+ .main_clk = "sr2_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
+ .module_bit = OMAP3430_EN_SR2_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
},
},
- .opt_clks = dss_dsi1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
- .slaves = omap3xxx_dss_dsi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_slaves),
- .flags = HWMOD_NO_IDLEST,
+ .dev_attr = &sr2_dev_attr,
+ .mpu_irqs = omap3_smartreflex_core_irqs,
+ .flags = HWMOD_SET_DEFAULT_CLOCKACT,
};
-/* l4_core -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dss_rfbi_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_rfbi_addrs,
- .fw = {
+static struct omap_hwmod omap36xx_sr2_hwmod = {
+ .name = "sr2",
+ .class = &omap36xx_smartreflex_hwmod_class,
+ .main_clk = "sr2_fck",
+ .prcm = {
.omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
- .flags = OMAP_FIREWALL_L4,
- }
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_SR2_SHIFT,
+ .module_offs = WKUP_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
+ },
},
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .dev_attr = &sr2_dev_attr,
+ .mpu_irqs = omap3_smartreflex_core_irqs,
};
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = {
- &omap3xxx_l4_core__dss_rfbi,
+/*
+ * 'mailbox' class
+ * mailbox module allowing communication between the on-chip processors
+ * using a queued mailbox-interrupt mechanism.
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_mailbox_sysc = {
+ .rev_offs = 0x000,
+ .sysc_offs = 0x010,
+ .syss_offs = 0x014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
- { .role = "ick", .clk = "dss_ick" },
+static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
+ .name = "mailbox",
+ .sysc = &omap3xxx_mailbox_sysc,
};
-static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = {
- .name = "dss_rfbi",
- .class = &omap2_rfbi_hwmod_class,
- .main_clk = "dss1_alwon_fck",
+static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
+ { .irq = 26 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_mailbox_hwmod = {
+ .name = "mailbox",
+ .class = &omap3xxx_mailbox_hwmod_class,
+ .mpu_irqs = omap3xxx_mailbox_irqs,
+ .main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
+ .module_bit = OMAP3430_EN_MAILBOXES_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
},
},
- .opt_clks = dss_rfbi_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
- .slaves = omap3xxx_dss_rfbi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_slaves),
- .flags = HWMOD_NO_IDLEST,
};
-/* l4_core -> dss_venc */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dss_venc_hwmod,
- .clk = "dss_ick",
- .addr = omap2_dss_venc_addrs,
- .fw = {
- .omap2 = {
- .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
- .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
- .flags = OMAP_FIREWALL_L4,
- }
- },
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/*
+ * 'mcspi' class
+ * multichannel serial port interface (mcspi) / master/slave synchronous serial
+ * bus
+ */
+
+static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = {
- &omap3xxx_l4_core__dss_venc,
+static struct omap_hwmod_class omap34xx_mcspi_class = {
+ .name = "mcspi",
+ .sysc = &omap34xx_mcspi_sysc,
+ .rev = OMAP3_MCSPI_REV,
};
-static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = {
- /* required only on OMAP3430 */
- { .role = "tv_dac_clk", .clk = "dss_96m_fck" },
+/* mcspi1 */
+static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
+ .num_chipselect = 4,
};
-static struct omap_hwmod omap3xxx_dss_venc_hwmod = {
- .name = "dss_venc",
- .class = &omap2_venc_hwmod_class,
- .main_clk = "dss_tv_fck",
+static struct omap_hwmod omap34xx_mcspi1 = {
+ .name = "mcspi1",
+ .mpu_irqs = omap2_mcspi1_mpu_irqs,
+ .sdma_reqs = omap2_mcspi1_sdma_reqs,
+ .main_clk = "mcspi1_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_DSS1_SHIFT,
- .module_offs = OMAP3430_DSS_MOD,
+ .module_bit = OMAP3430_EN_MCSPI1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT,
},
},
- .opt_clks = dss_venc_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks),
- .slaves = omap3xxx_dss_venc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dss_venc_slaves),
- .flags = HWMOD_NO_IDLEST,
-};
-
-/* I2C1 */
-
-static struct omap_i2c_dev_attr i2c1_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .class = &omap34xx_mcspi_class,
+ .dev_attr = &omap_mcspi1_dev_attr,
};
-static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
- &omap3_l4_core__i2c1,
+/* mcspi2 */
+static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
+ .num_chipselect = 2,
};
-static struct omap_hwmod omap3xxx_i2c1_hwmod = {
- .name = "i2c1",
- .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = omap2_i2c1_mpu_irqs,
- .sdma_reqs = omap2_i2c1_sdma_reqs,
- .main_clk = "i2c1_fck",
+static struct omap_hwmod omap34xx_mcspi2 = {
+ .name = "mcspi2",
+ .mpu_irqs = omap2_mcspi2_mpu_irqs,
+ .sdma_reqs = omap2_mcspi2_sdma_reqs,
+ .main_clk = "mcspi2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_I2C1_SHIFT,
+ .module_bit = OMAP3430_EN_MCSPI2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT,
},
},
- .slaves = omap3xxx_i2c1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c1_dev_attr,
+ .class = &omap34xx_mcspi_class,
+ .dev_attr = &omap_mcspi2_dev_attr,
};
-/* I2C2 */
-
-static struct omap_i2c_dev_attr i2c2_dev_attr = {
- .fifo_depth = 8, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+/* mcspi3 */
+static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
+ { .name = "irq", .irq = 91 }, /* 91 */
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
- &omap3_l4_core__i2c2,
+static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
+ { .name = "tx0", .dma_req = 15 },
+ { .name = "rx0", .dma_req = 16 },
+ { .name = "tx1", .dma_req = 23 },
+ { .name = "rx1", .dma_req = 24 },
+ { .dma_req = -1 }
};
-static struct omap_hwmod omap3xxx_i2c2_hwmod = {
- .name = "i2c2",
- .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = omap2_i2c2_mpu_irqs,
- .sdma_reqs = omap2_i2c2_sdma_reqs,
- .main_clk = "i2c2_fck",
+static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
+ .num_chipselect = 2,
+};
+
+static struct omap_hwmod omap34xx_mcspi3 = {
+ .name = "mcspi3",
+ .mpu_irqs = omap34xx_mcspi3_mpu_irqs,
+ .sdma_reqs = omap34xx_mcspi3_sdma_reqs,
+ .main_clk = "mcspi3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_I2C2_SHIFT,
+ .module_bit = OMAP3430_EN_MCSPI3_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT,
},
},
- .slaves = omap3xxx_i2c2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c2_dev_attr,
-};
-
-/* I2C3 */
-
-static struct omap_i2c_dev_attr i2c3_dev_attr = {
- .fifo_depth = 64, /* bytes */
- .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
- OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
- OMAP_I2C_FLAG_BUS_SHIFT_2,
+ .class = &omap34xx_mcspi_class,
+ .dev_attr = &omap_mcspi3_dev_attr,
};
-static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
- { .irq = INT_34XX_I2C3_IRQ, },
+/* mcspi4 */
+static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
+ { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
{ .irq = -1 }
};
-static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
- { .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX },
- { .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX },
+static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
+ { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */
+ { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */
{ .dma_req = -1 }
};
-static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
- &omap3_l4_core__i2c3,
+static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
+ .num_chipselect = 1,
};
-static struct omap_hwmod omap3xxx_i2c3_hwmod = {
- .name = "i2c3",
- .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
- .mpu_irqs = i2c3_mpu_irqs,
- .sdma_reqs = i2c3_sdma_reqs,
- .main_clk = "i2c3_fck",
+static struct omap_hwmod omap34xx_mcspi4 = {
+ .name = "mcspi4",
+ .mpu_irqs = omap34xx_mcspi4_mpu_irqs,
+ .sdma_reqs = omap34xx_mcspi4_sdma_reqs,
+ .main_clk = "mcspi4_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_I2C3_SHIFT,
+ .module_bit = OMAP3430_EN_MCSPI4_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT,
},
},
- .slaves = omap3xxx_i2c3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
- .class = &i2c_class,
- .dev_attr = &i2c3_dev_attr,
+ .class = &omap34xx_mcspi_class,
+ .dev_attr = &omap_mcspi4_dev_attr,
};
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
- {
- .pa_start = 0x48310000,
- .pa_end = 0x483101ff,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* usbhsotg */
+static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
+ .rev_offs = 0x0400,
+ .sysc_offs = 0x0404,
+ .syss_offs = 0x0408,
+ .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
- .master = &omap3xxx_l4_wkup_hwmod,
- .slave = &omap3xxx_gpio1_hwmod,
- .addr = omap3xxx_gpio1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class usbotg_class = {
+ .name = "usbotg",
+ .sysc = &omap3xxx_usbhsotg_sysc,
};
-/* l4_per -> gpio2 */
-static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
- {
- .pa_start = 0x49050000,
- .pa_end = 0x490501ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
+/* usb_otg_hs */
+static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_gpio2_hwmod,
- .addr = omap3xxx_gpio2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ { .name = "mc", .irq = 92 },
+ { .name = "dma", .irq = 93 },
+ { .irq = -1 }
};
-/* l4_per -> gpio3 */
-static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
- {
- .pa_start = 0x49052000,
- .pa_end = 0x490521ff,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
+ .name = "usb_otg_hs",
+ .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs,
+ .main_clk = "hsotgusb_ick",
+ .prcm = {
+ .omap2 = {
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
+ .module_offs = CORE_MOD,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
+ },
},
- { }
-};
+ .class = &usbotg_class,
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_gpio3_hwmod,
- .addr = omap3xxx_gpio3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ /*
+ * Erratum ID: i479 idle_req / idle_ack mechanism potentially
+ * broken when autoidle is enabled
+ * workaround is to disable the autoidle bit at module level.
+ */
+ .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
+ | HWMOD_SWSUP_MSTANDBY,
};
-/* l4_per -> gpio4 */
-static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
- {
- .pa_start = 0x49054000,
- .pa_end = 0x490541ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
+/* usb_otg_hs */
+static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_gpio4_hwmod,
- .addr = omap3xxx_gpio4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ { .name = "mc", .irq = 71 },
+ { .irq = -1 }
};
-/* l4_per -> gpio5 */
-static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
- {
- .pa_start = 0x49056000,
- .pa_end = 0x490561ff,
- .flags = ADDR_TYPE_RT
- },
- { }
+static struct omap_hwmod_class am35xx_usbotg_class = {
+ .name = "am35xx_usbotg",
+ .sysc = NULL,
};
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_gpio5_hwmod,
- .addr = omap3xxx_gpio5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod am35xx_usbhsotg_hwmod = {
+ .name = "am35x_otg_hs",
+ .mpu_irqs = am35xx_usbhsotg_mpu_irqs,
+ .main_clk = NULL,
+ .prcm = {
+ .omap2 = {
+ },
+ },
+ .class = &am35xx_usbotg_class,
};
-/* l4_per -> gpio6 */
-static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
- {
- .pa_start = 0x49058000,
- .pa_end = 0x490581ff,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* MMC/SD/SDIO common */
+static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
+ .rev_offs = 0x1fc,
+ .sysc_offs = 0x10,
+ .syss_offs = 0x14,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_gpio6_hwmod,
- .addr = omap3xxx_gpio6_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap34xx_mmc_class = {
+ .name = "mmc",
+ .sysc = &omap34xx_mmc_sysc,
};
-/*
- * 'gpio' class
- * general purpose io module
- */
+/* MMC/SD/SDIO1 */
-static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
+ { .irq = 83, },
+ { .irq = -1 }
};
-static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
- .name = "gpio",
- .sysc = &omap3xxx_gpio_sysc,
- .rev = 1,
+static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 61, },
+ { .name = "rx", .dma_req = 62, },
+ { .dma_req = -1 }
};
-/* gpio_dev_attr*/
-static struct omap_gpio_dev_attr gpio_dev_attr = {
- .bank_width = 32,
- .dbck_flag = true,
+static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
+ { .role = "dbck", .clk = "omap_32k_fck", },
};
-/* gpio1 */
-static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio1_dbck", },
+static struct omap_mmc_dev_attr mmc1_dev_attr = {
+ .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
-static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
- &omap3xxx_l4_wkup__gpio1,
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+ .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
+ OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
-static struct omap_hwmod omap3xxx_gpio1_hwmod = {
- .name = "gpio1",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio1_irqs,
- .main_clk = "gpio1_ick",
- .opt_clks = gpio1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
+static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
+ .name = "mmc1",
+ .mpu_irqs = omap34xx_mmc1_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc1_sdma_reqs,
+ .opt_clks = omap34xx_mmc1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
+ .main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO1_SHIFT,
- .module_offs = WKUP_MOD,
+ .module_bit = OMAP3430_EN_MMC1_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
},
},
- .slaves = omap3xxx_gpio1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio1_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio2 */
-static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio2_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
- &omap3xxx_l4_per__gpio2,
+ .dev_attr = &mmc1_pre_es3_dev_attr,
+ .class = &omap34xx_mmc_class,
};
-static struct omap_hwmod omap3xxx_gpio2_hwmod = {
- .name = "gpio2",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio2_irqs,
- .main_clk = "gpio2_ick",
- .opt_clks = gpio2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
+static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
+ .name = "mmc1",
+ .mpu_irqs = omap34xx_mmc1_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc1_sdma_reqs,
+ .opt_clks = omap34xx_mmc1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
+ .main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO2_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_MMC1_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
},
},
- .slaves = omap3xxx_gpio2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio2_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
+ .dev_attr = &mmc1_dev_attr,
+ .class = &omap34xx_mmc_class,
};
-/* gpio3 */
-static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio3_dbck", },
+/* MMC/SD/SDIO2 */
+
+static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
+ { .irq = INT_24XX_MMC2_IRQ, },
+ { .irq = -1 }
};
-static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
- &omap3xxx_l4_per__gpio3,
+static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 47, },
+ { .name = "rx", .dma_req = 48, },
+ { .dma_req = -1 }
};
-static struct omap_hwmod omap3xxx_gpio3_hwmod = {
- .name = "gpio3",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio3_irqs,
- .main_clk = "gpio3_ick",
- .opt_clks = gpio3_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
+static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
+ { .role = "dbck", .clk = "omap_32k_fck", },
+};
+
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+ .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
+ .name = "mmc2",
+ .mpu_irqs = omap34xx_mmc2_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc2_sdma_reqs,
+ .opt_clks = omap34xx_mmc2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+ .main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO3_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_MMC2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
},
},
- .slaves = omap3xxx_gpio3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio3_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
-
-/* gpio4 */
-static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio4_dbck", },
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
- &omap3xxx_l4_per__gpio4,
+ .dev_attr = &mmc2_pre_es3_dev_attr,
+ .class = &omap34xx_mmc_class,
};
-static struct omap_hwmod omap3xxx_gpio4_hwmod = {
- .name = "gpio4",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap2_gpio4_irqs,
- .main_clk = "gpio4_ick",
- .opt_clks = gpio4_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
+static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
+ .name = "mmc2",
+ .mpu_irqs = omap34xx_mmc2_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc2_sdma_reqs,
+ .opt_clks = omap34xx_mmc2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+ .main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
+ .module_offs = CORE_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO4_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_MMC2_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
},
},
- .slaves = omap3xxx_gpio4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio4_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
+ .class = &omap34xx_mmc_class,
};
-/* gpio5 */
-static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
- { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+/* MMC/SD/SDIO3 */
+
+static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
+ { .irq = 94, },
{ .irq = -1 }
};
-static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio5_dbck", },
+static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
+ { .name = "tx", .dma_req = 77, },
+ { .name = "rx", .dma_req = 78, },
+ { .dma_req = -1 }
};
-static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
- &omap3xxx_l4_per__gpio5,
+static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
+ { .role = "dbck", .clk = "omap_32k_fck", },
};
-static struct omap_hwmod omap3xxx_gpio5_hwmod = {
- .name = "gpio5",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap3xxx_gpio5_irqs,
- .main_clk = "gpio5_ick",
- .opt_clks = gpio5_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
+static struct omap_hwmod omap3xxx_mmc3_hwmod = {
+ .name = "mmc3",
+ .mpu_irqs = omap34xx_mmc3_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc3_sdma_reqs,
+ .opt_clks = omap34xx_mmc3_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks),
+ .main_clk = "mmchs3_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO5_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430_EN_MMC3_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
+ .idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
},
},
- .slaves = omap3xxx_gpio5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio5_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
+ .class = &omap34xx_mmc_class,
};
-/* gpio6 */
-static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
- { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
- { .irq = -1 }
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
- { .role = "dbclk", .clk = "gpio6_dbck", },
+static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap3xxx_usb_host_hs_sysc,
};
-static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
- &omap3xxx_l4_per__gpio6,
+static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
+ { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
};
-static struct omap_hwmod omap3xxx_gpio6_hwmod = {
- .name = "gpio6",
- .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET,
- .mpu_irqs = omap3xxx_gpio6_irqs,
- .main_clk = "gpio6_ick",
- .opt_clks = gpio6_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
- .prcm = {
+static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 },
+ { .name = "ehci-irq", .irq = 77 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap3xxx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_host_hs_irqs,
+ .main_clk = "usbhost_48m_fck",
+ .prcm = {
.omap2 = {
+ .module_offs = OMAP3430ES2_USBHOST_MOD,
.prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_GPIO6_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
+ .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
.idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
},
},
- .slaves = omap3xxx_gpio6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_gpio6_slaves),
- .class = &omap3xxx_gpio_hwmod_class,
- .dev_attr = &gpio_dev_attr,
-};
+ .opt_clks = omap3xxx_usb_host_hs_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
-/* dma_system -> L3 */
-static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
- .master = &omap3xxx_dma_system_hwmod,
- .slave = &omap3xxx_l3_main_hwmod,
- .clk = "core_l3_ick",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
-/* dma attributes */
-static struct omap_dma_dev_attr dma_dev_attr = {
- .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
- IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
- .lch_count = 32,
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
};
-static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
.rev_offs = 0x0000,
- .sysc_offs = 0x002c,
- .syss_offs = 0x0028,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
- SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE |
- SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
- .name = "dma",
- .sysc = &omap3xxx_dma_sysc,
-};
-
-/* dma_system */
-static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
- {
- .pa_start = 0x48056000,
- .pa_end = 0x48056fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = {
- &omap3xxx_dma_system__l3,
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_dma_system_hwmod,
- .clk = "core_l4_ick",
- .addr = omap3xxx_dma_system_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap3xxx_usb_tll_hs_sysc,
};
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = {
- &omap3xxx_l4_core__dma_system,
+static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 },
+ { .irq = -1 }
};
-static struct omap_hwmod omap3xxx_dma_system_hwmod = {
- .name = "dma",
- .class = &omap3xxx_dma_hwmod_class,
- .mpu_irqs = omap2_dma_system_irqs,
- .main_clk = "core_l3_ick",
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap3xxx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_tll_hs_irqs,
+ .main_clk = "usbtll_fck",
.prcm = {
.omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_ST_SDMA_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_SDMA_SHIFT,
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 3,
+ .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
+ .idlest_reg_id = 3,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
},
},
- .slaves = omap3xxx_dma_system_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_dma_system_slaves),
- .masters = omap3xxx_dma_system_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_dma_system_masters),
- .dev_attr = &dma_dev_attr,
- .flags = HWMOD_NO_IDLEST,
};
/*
- * 'mcbsp' class
- * multi channel buffered serial port controller
+ * interfaces
*/
-static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = {
- .sysc_offs = 0x008c,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
- .clockact = 0x2,
-};
-
-static struct omap_hwmod_class omap3xxx_mcbsp_hwmod_class = {
- .name = "mcbsp",
- .sysc = &omap3xxx_mcbsp_sysc,
- .rev = MCBSP_CONFIG_TYPE3,
+/* L3 -> L4_CORE interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_l4_core_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp1 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = {
- { .name = "irq", .irq = 16 },
- { .name = "tx", .irq = 59 },
- { .name = "rx", .irq = 60 },
- { .irq = -1 }
+/* L3 -> L4_PER interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_l4_per_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
+static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = {
{
- .name = "mpu",
- .pa_start = 0x48074000,
- .pa_end = 0x480740ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = 0x68000000,
+ .pa_end = 0x6800ffff,
+ .flags = ADDR_TYPE_RT,
},
{ }
};
-/* l4_core -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mcbsp1_hwmod,
- .clk = "mcbsp1_ick",
- .addr = omap3xxx_mcbsp1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* MPU -> L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = {
+ .master = &omap3xxx_mpu_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .addr = omap3xxx_l3_main_addrs,
+ .user = OCP_USER_MPU,
};
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp1_slaves[] = {
- &omap3xxx_l4_core__mcbsp1,
+/* DSS -> l3 */
+static struct omap_hwmod_ocp_if omap3430es1_dss__l3 = {
+ .master = &omap3430es1_dss_core_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap3xxx_mcbsp1_hwmod = {
- .name = "mcbsp1",
- .class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp1_irqs,
- .sdma_reqs = omap2_mcbsp1_sdma_reqs,
- .main_clk = "mcbsp1_fck",
- .prcm = {
+static struct omap_hwmod_ocp_if omap3xxx_dss__l3 = {
+ .master = &omap3xxx_dss_core_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .fw = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP1_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP1_SHIFT,
- },
+ .l3_perm_bit = OMAP3_L3_CORE_FW_INIT_ID_DSS,
+ .flags = OMAP_FIREWALL_L3,
+ }
},
- .slaves = omap3xxx_mcbsp1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_slaves),
-};
-
-/* mcbsp2 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = {
- { .name = "irq", .irq = 17 },
- { .name = "tx", .irq = 62 },
- { .name = "rx", .irq = 63 },
- { .irq = -1 }
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x49022000,
- .pa_end = 0x490220ff,
- .flags = ADDR_TYPE_RT
- },
- { }
+/* l3_core -> usbhsotg interface */
+static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = {
+ .master = &omap3xxx_usbhsotg_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
};
-/* l4_per -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_mcbsp2_hwmod,
- .clk = "mcbsp2_ick",
- .addr = omap3xxx_mcbsp2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/* l3_core -> am35xx_usbhsotg interface */
+static struct omap_hwmod_ocp_if am35xx_usbhsotg__l3 = {
+ .master = &am35xx_usbhsotg_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_slaves[] = {
- &omap3xxx_l4_per__mcbsp2,
+/* L4_CORE -> L4_WKUP interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_l4_wkup_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp2_dev_attr = {
- .sidetone = "mcbsp2_sidetone",
+/* L4 CORE -> MMC1 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_pre_es3_mmc1_hwmod,
+ .clk = "mmchs1_ick",
+ .addr = omap2430_mmc1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .flags = OMAP_FIREWALL_L4
};
-static struct omap_hwmod omap3xxx_mcbsp2_hwmod = {
- .name = "mcbsp2",
- .class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp2_irqs,
- .sdma_reqs = omap2_mcbsp2_sdma_reqs,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
- },
- },
- .slaves = omap3xxx_mcbsp2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_slaves),
- .dev_attr = &omap34xx_mcbsp2_dev_attr,
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_es3plus_mmc1_hwmod,
+ .clk = "mmchs1_ick",
+ .addr = omap2430_mmc1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .flags = OMAP_FIREWALL_L4
};
-/* mcbsp3 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = {
- { .name = "irq", .irq = 22 },
- { .name = "tx", .irq = 89 },
- { .name = "rx", .irq = 90 },
- { .irq = -1 }
+/* L4 CORE -> MMC2 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__pre_es3_mmc2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_pre_es3_mmc2_hwmod,
+ .clk = "mmchs2_ick",
+ .addr = omap2430_mmc2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .flags = OMAP_FIREWALL_L4
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__es3plus_mmc2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_es3plus_mmc2_hwmod,
+ .clk = "mmchs2_ick",
+ .addr = omap2430_mmc2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .flags = OMAP_FIREWALL_L4
+};
+
+/* L4 CORE -> MMC3 interface */
+static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = {
{
- .name = "mpu",
- .pa_start = 0x49024000,
- .pa_end = 0x490240ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = 0x480ad000,
+ .pa_end = 0x480ad1ff,
+ .flags = ADDR_TYPE_RT,
},
{ }
};
-/* l4_per -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_mcbsp3_hwmod,
- .clk = "mcbsp3_ick",
- .addr = omap3xxx_mcbsp3_addrs,
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_mmc3_hwmod,
+ .clk = "mmchs3_ick",
+ .addr = omap3xxx_mmc3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
+ .flags = OMAP_FIREWALL_L4
};
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_slaves[] = {
- &omap3xxx_l4_per__mcbsp3,
+/* L4 CORE -> UART1 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = {
+ {
+ .pa_start = OMAP3_UART1_BASE,
+ .pa_end = OMAP3_UART1_BASE + SZ_8K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+ },
+ { }
};
-static struct omap_mcbsp_dev_attr omap34xx_mcbsp3_dev_attr = {
- .sidetone = "mcbsp3_sidetone",
+static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_uart1_hwmod,
+ .clk = "uart1_ick",
+ .addr = omap3xxx_uart1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap3xxx_mcbsp3_hwmod = {
- .name = "mcbsp3",
- .class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp3_irqs,
- .sdma_reqs = omap2_mcbsp3_sdma_reqs,
- .main_clk = "mcbsp3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP3_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
- },
+/* L4 CORE -> UART2 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = {
+ {
+ .pa_start = OMAP3_UART2_BASE,
+ .pa_end = OMAP3_UART2_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
- .slaves = omap3xxx_mcbsp3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_slaves),
- .dev_attr = &omap34xx_mcbsp3_dev_attr,
-};
-
-/* mcbsp4 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = {
- { .name = "irq", .irq = 23 },
- { .name = "tx", .irq = 54 },
- { .name = "rx", .irq = 55 },
- { .irq = -1 }
+ { }
};
-static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = {
- { .name = "rx", .dma_req = 20 },
- { .name = "tx", .dma_req = 19 },
- { .dma_req = -1 }
+static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_uart2_hwmod,
+ .clk = "uart2_ick",
+ .addr = omap3xxx_uart2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
+/* L4 PER -> UART3 interface */
+static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = {
{
- .name = "mpu",
- .pa_start = 0x49026000,
- .pa_end = 0x490260ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = OMAP3_UART3_BASE,
+ .pa_end = OMAP3_UART3_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
+static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = {
.master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_mcbsp4_hwmod,
- .clk = "mcbsp4_ick",
- .addr = omap3xxx_mcbsp4_addrs,
+ .slave = &omap3xxx_uart3_hwmod,
+ .clk = "uart3_ick",
+ .addr = omap3xxx_uart3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp4_slaves[] = {
- &omap3xxx_l4_per__mcbsp4,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp4_hwmod = {
- .name = "mcbsp4",
- .class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp4_irqs,
- .sdma_reqs = omap3xxx_mcbsp4_sdma_chs,
- .main_clk = "mcbsp4_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP4_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP4_SHIFT,
- },
+/* L4 PER -> UART4 interface */
+static struct omap_hwmod_addr_space omap36xx_uart4_addr_space[] = {
+ {
+ .pa_start = OMAP3_UART4_BASE,
+ .pa_end = OMAP3_UART4_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
- .slaves = omap3xxx_mcbsp4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_slaves),
-};
-
-/* mcbsp5 */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = {
- { .name = "irq", .irq = 27 },
- { .name = "tx", .irq = 81 },
- { .name = "rx", .irq = 82 },
- { .irq = -1 }
+ { }
};
-static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = {
- { .name = "rx", .dma_req = 22 },
- { .name = "tx", .dma_req = 21 },
- { .dma_req = -1 }
+static struct omap_hwmod_ocp_if omap36xx_l4_per__uart4 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap36xx_uart4_hwmod,
+ .clk = "uart4_ick",
+ .addr = omap36xx_uart4_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
+/* AM35xx: L4 CORE -> UART4 interface */
+static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
{
- .name = "mpu",
- .pa_start = 0x48096000,
- .pa_end = 0x480960ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = OMAP3_UART4_AM35XX_BASE,
+ .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
- { }
};
-/* l4_core -> mcbsp5 */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
+static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
.master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mcbsp5_hwmod,
- .clk = "mcbsp5_ick",
- .addr = omap3xxx_mcbsp5_addrs,
+ .slave = &am35xx_uart4_hwmod,
+ .clk = "uart4_ick",
+ .addr = am35xx_uart4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp5 slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp5_slaves[] = {
- &omap3xxx_l4_core__mcbsp5,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp5_hwmod = {
- .name = "mcbsp5",
- .class = &omap3xxx_mcbsp_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp5_irqs,
- .sdma_reqs = omap3xxx_mcbsp5_sdma_chs,
- .main_clk = "mcbsp5_fck",
- .prcm = {
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c1_hwmod,
+ .clk = "i2c1_ick",
+ .addr = omap2_i2c1_addr_space,
+ .fw = {
.omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP5_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP5_SHIFT,
- },
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
},
- .slaves = omap3xxx_mcbsp5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_slaves),
-};
-/* 'mcbsp sidetone' class */
-
-static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = {
- .sysc_offs = 0x0010,
- .sysc_flags = SYSC_HAS_AUTOIDLE,
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = {
- .name = "mcbsp_sidetone",
- .sysc = &omap3xxx_mcbsp_sidetone_sysc,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcbsp2_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = {
- { .name = "irq", .irq = 4 },
- { .irq = -1 }
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c2_hwmod,
+ .clk = "i2c2_ick",
+ .addr = omap2_i2c2_addr_space,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
+/* L4 CORE -> I2C3 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
{
- .name = "sidetone",
- .pa_start = 0x49028000,
- .pa_end = 0x490280ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = 0x48060000,
+ .pa_end = 0x48060000 + SZ_128 - 1,
+ .flags = ADDR_TYPE_RT,
},
{ }
};
-/* l4_per -> mcbsp2_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_mcbsp2_sidetone_hwmod,
- .clk = "mcbsp2_ick",
- .addr = omap3xxx_mcbsp2_sidetone_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* mcbsp2_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp2_sidetone_slaves[] = {
- &omap3xxx_l4_per__mcbsp2_sidetone,
-};
-
-static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = {
- .name = "mcbsp2_sidetone",
- .class = &omap3xxx_mcbsp_sidetone_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs,
- .main_clk = "mcbsp2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP2_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT,
- },
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_i2c3_hwmod,
+ .clk = "i2c3_ick",
+ .addr = omap3xxx_i2c3_addr_space,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
+ .l4_prot_group = 7,
+ .flags = OMAP_FIREWALL_L4,
+ }
},
- .slaves = omap3xxx_mcbsp2_sidetone_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_slaves),
-};
-
-/* mcbsp3_sidetone */
-static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = {
- { .name = "irq", .irq = 5 },
- { .irq = -1 }
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
{
- .name = "sidetone",
- .pa_start = 0x4902A000,
- .pa_end = 0x4902A0ff,
- .flags = ADDR_TYPE_RT
+ .pa_start = OMAP34XX_SR1_BASE,
+ .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
},
{ }
};
-/* l4_per -> mcbsp3_sidetone */
-static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
- .master = &omap3xxx_l4_per_hwmod,
- .slave = &omap3xxx_mcbsp3_sidetone_hwmod,
- .clk = "mcbsp3_ick",
- .addr = omap3xxx_mcbsp3_sidetone_addrs,
+static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_sr1_hwmod,
+ .clk = "sr_l4_ick",
+ .addr = omap3_sr1_addr_space,
.user = OCP_USER_MPU,
};
-/* mcbsp3_sidetone slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mcbsp3_sidetone_slaves[] = {
- &omap3xxx_l4_per__mcbsp3_sidetone,
+static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap36xx_sr1_hwmod,
+ .clk = "sr_l4_ick",
+ .addr = omap3_sr1_addr_space,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = {
- .name = "mcbsp3_sidetone",
- .class = &omap3xxx_mcbsp_sidetone_hwmod_class,
- .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs,
- .main_clk = "mcbsp3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCBSP3_SHIFT,
- .module_offs = OMAP3430_PER_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT,
- },
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+ {
+ .pa_start = OMAP34XX_SR2_BASE,
+ .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT,
},
- .slaves = omap3xxx_mcbsp3_sidetone_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_slaves),
+ { }
};
-
-/* SR common */
-static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
- .clkact_shift = 20,
+static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_sr2_hwmod,
+ .clk = "sr_l4_ick",
+ .addr = omap3_sr2_addr_space,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
- .sysc_offs = 0x24,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
- .clockact = CLOCKACT_TEST_ICLK,
- .sysc_fields = &omap34xx_sr_sysc_fields,
+static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap36xx_sr2_hwmod,
+ .clk = "sr_l4_ick",
+ .addr = omap3_sr2_addr_space,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
- .name = "smartreflex",
- .sysc = &omap34xx_sr_sysc,
- .rev = 1,
+static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = {
+ {
+ .pa_start = OMAP34XX_HSUSB_OTG_BASE,
+ .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
- .sidle_shift = 24,
- .enwkup_shift = 26
+/* l4_core -> usbhsotg */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_usbhsotg_hwmod,
+ .clk = "l4_ick",
+ .addr = omap3xxx_usbhsotg_addrs,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
- .sysc_offs = 0x38,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
- SYSC_NO_CACHE),
- .sysc_fields = &omap36xx_sr_sysc_fields,
+static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = {
+ {
+ .pa_start = AM35XX_IPSS_USBOTGSS_BASE,
+ .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
- .name = "smartreflex",
- .sysc = &omap36xx_sr_sysc,
- .rev = 2,
+/* l4_core -> usbhsotg */
+static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_usbhsotg_hwmod,
+ .clk = "l4_ick",
+ .addr = am35xx_usbhsotg_addrs,
+ .user = OCP_USER_MPU,
};
-/* SR1 */
-static struct omap_smartreflex_dev_attr sr1_dev_attr = {
- .sensor_voltdm_name = "mpu_iva",
+/* L4_WKUP -> L4_SEC interface */
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__l4_sec = {
+ .master = &omap3xxx_l4_wkup_hwmod,
+ .slave = &omap3xxx_l4_sec_hwmod,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
- &omap3_l4_core__sr1,
+/* IVA2 <- L3 interface */
+static struct omap_hwmod_ocp_if omap3xxx_l3__iva = {
+ .master = &omap3xxx_l3_main_hwmod,
+ .slave = &omap3xxx_iva_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_sr1_hwmod = {
- .name = "sr1_hwmod",
- .class = &omap34xx_smartreflex_hwmod_class,
- .main_clk = "sr1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_SR1_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
- },
+static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = {
+ {
+ .pa_start = 0x48318000,
+ .pa_end = 0x48318000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap3_sr1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .dev_attr = &sr1_dev_attr,
- .mpu_irqs = omap3_smartreflex_mpu_irqs,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
+ { }
};
-static struct omap_hwmod omap36xx_sr1_hwmod = {
- .name = "sr1_hwmod",
- .class = &omap36xx_smartreflex_hwmod_class,
- .main_clk = "sr1_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_SR1_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
- },
- },
- .slaves = omap3_sr1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3_sr1_slaves),
- .dev_attr = &sr1_dev_attr,
- .mpu_irqs = omap3_smartreflex_mpu_irqs,
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = {
+ .master = &omap3xxx_l4_wkup_hwmod,
+ .slave = &omap3xxx_timer1_hwmod,
+ .clk = "gpt1_ick",
+ .addr = omap3xxx_timer1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* SR2 */
-static struct omap_smartreflex_dev_attr sr2_dev_attr = {
- .sensor_voltdm_name = "core",
+static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = {
+ {
+ .pa_start = 0x49032000,
+ .pa_end = 0x49032000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
- &omap3_l4_core__sr2,
+/* l4_per -> timer2 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer2_hwmod,
+ .clk = "gpt2_ick",
+ .addr = omap3xxx_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_sr2_hwmod = {
- .name = "sr2_hwmod",
- .class = &omap34xx_smartreflex_hwmod_class,
- .main_clk = "sr2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_SR2_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
- },
+static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = {
+ {
+ .pa_start = 0x49034000,
+ .pa_end = 0x49034000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap3_sr2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .dev_attr = &sr2_dev_attr,
- .mpu_irqs = omap3_smartreflex_core_irqs,
- .flags = HWMOD_SET_DEFAULT_CLOCKACT,
+ { }
};
-static struct omap_hwmod omap36xx_sr2_hwmod = {
- .name = "sr2_hwmod",
- .class = &omap36xx_smartreflex_hwmod_class,
- .main_clk = "sr2_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_SR2_SHIFT,
- .module_offs = WKUP_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
- },
- },
- .slaves = omap3_sr2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3_sr2_slaves),
- .dev_attr = &sr2_dev_attr,
- .mpu_irqs = omap3_smartreflex_core_irqs,
+/* l4_per -> timer3 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer3_hwmod,
+ .clk = "gpt3_ick",
+ .addr = omap3xxx_timer3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/*
- * 'mailbox' class
- * mailbox module allowing communication between the on-chip processors
- * using a queued mailbox-interrupt mechanism.
- */
+static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = {
+ {
+ .pa_start = 0x49036000,
+ .pa_end = 0x49036000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
-static struct omap_hwmod_class_sysconfig omap3xxx_mailbox_sysc = {
- .rev_offs = 0x000,
- .sysc_offs = 0x010,
- .syss_offs = 0x014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+/* l4_per -> timer4 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer4_hwmod,
+ .clk = "gpt4_ick",
+ .addr = omap3xxx_timer4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
- .name = "mailbox",
- .sysc = &omap3xxx_mailbox_sysc,
+static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = {
+ {
+ .pa_start = 0x49038000,
+ .pa_end = 0x49038000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod omap3xxx_mailbox_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
- { .irq = 26 },
- { .irq = -1 }
+/* l4_per -> timer5 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer5_hwmod,
+ .clk = "gpt5_ick",
+ .addr = omap3xxx_timer5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
+static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = {
{
- .pa_start = 0x48094000,
- .pa_end = 0x480941ff,
- .flags = ADDR_TYPE_RT,
+ .pa_start = 0x4903A000,
+ .pa_end = 0x4903A000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
},
{ }
};
-/* l4_core -> mailbox */
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap3xxx_mailbox_hwmod,
- .addr = omap3xxx_mailbox_addrs,
+/* l4_per -> timer6 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer6_hwmod,
+ .clk = "gpt6_ick",
+ .addr = omap3xxx_timer6_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap3xxx_mailbox_slaves[] = {
- &omap3xxx_l4_core__mailbox,
-};
-
-static struct omap_hwmod omap3xxx_mailbox_hwmod = {
- .name = "mailbox",
- .class = &omap3xxx_mailbox_hwmod_class,
- .mpu_irqs = omap3xxx_mailbox_irqs,
- .main_clk = "mailboxes_ick",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MAILBOXES_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
- },
+static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = {
+ {
+ .pa_start = 0x4903C000,
+ .pa_end = 0x4903C000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap3xxx_mailbox_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mailbox_slaves),
+ { }
};
-/* l4 core -> mcspi1 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_mcspi1,
- .clk = "mcspi1_ick",
- .addr = omap2_mcspi1_addr_space,
+/* l4_per -> timer7 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer7_hwmod,
+ .clk = "gpt7_ick",
+ .addr = omap3xxx_timer7_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4 core -> mcspi2 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_mcspi2,
- .clk = "mcspi2_ick",
- .addr = omap2_mcspi2_addr_space,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = {
+ {
+ .pa_start = 0x4903E000,
+ .pa_end = 0x4903E000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-/* l4 core -> mcspi3 interface */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_mcspi3,
- .clk = "mcspi3_ick",
- .addr = omap2430_mcspi3_addr_space,
+/* l4_per -> timer8 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer8_hwmod,
+ .clk = "gpt8_ick",
+ .addr = omap3xxx_timer8_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* l4 core -> mcspi4 interface */
-static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
+static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = {
{
- .pa_start = 0x480ba000,
- .pa_end = 0x480ba0ff,
- .flags = ADDR_TYPE_RT,
+ .pa_start = 0x49040000,
+ .pa_end = 0x49040000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
},
{ }
};
-static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
- .master = &omap3xxx_l4_core_hwmod,
- .slave = &omap34xx_mcspi4,
- .clk = "mcspi4_ick",
- .addr = omap34xx_mcspi4_addr_space,
+/* l4_per -> timer9 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_timer9_hwmod,
+ .clk = "gpt9_ick",
+ .addr = omap3xxx_timer9_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/*
- * 'mcspi' class
- * multichannel serial port interface (mcspi) / master/slave synchronous serial
- * bus
- */
-
-static struct omap_hwmod_class_sysconfig omap34xx_mcspi_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+/* l4_core -> timer10 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_timer10_hwmod,
+ .clk = "gpt10_ick",
+ .addr = omap2_timer10_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_class omap34xx_mcspi_class = {
- .name = "mcspi",
- .sysc = &omap34xx_mcspi_sysc,
- .rev = OMAP3_MCSPI_REV,
+/* l4_core -> timer11 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_timer11_hwmod,
+ .clk = "gpt11_ick",
+ .addr = omap2_timer11_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcspi1 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = {
- &omap34xx_l4_core__mcspi1,
+static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = {
+ {
+ .pa_start = 0x48304000,
+ .pa_end = 0x48304000 + SZ_1K - 1,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = {
- .num_chipselect = 4,
+/* l4_core -> timer12 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_sec__timer12 = {
+ .master = &omap3xxx_l4_sec_hwmod,
+ .slave = &omap3xxx_timer12_hwmod,
+ .clk = "gpt12_ick",
+ .addr = omap3xxx_timer12_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_mcspi1 = {
- .name = "mcspi1",
- .mpu_irqs = omap2_mcspi1_mpu_irqs,
- .sdma_reqs = omap2_mcspi1_sdma_reqs,
- .main_clk = "mcspi1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCSPI1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCSPI1_SHIFT,
- },
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = {
+ {
+ .pa_start = 0x48314000,
+ .pa_end = 0x4831407f,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap34xx_mcspi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi1_slaves),
- .class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi1_dev_attr,
+ { }
};
-/* mcspi2 */
-static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = {
- &omap34xx_l4_core__mcspi2,
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = {
+ .master = &omap3xxx_l4_wkup_hwmod,
+ .slave = &omap3xxx_wd_timer2_hwmod,
+ .clk = "wdt2_ick",
+ .addr = omap3xxx_wd_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = {
- .num_chipselect = 2,
+/* l4_core -> dss */
+static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3430es1_dss_core_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_mcspi2 = {
- .name = "mcspi2",
- .mpu_irqs = omap2_mcspi2_mpu_irqs,
- .sdma_reqs = omap2_mcspi2_sdma_reqs,
- .main_clk = "mcspi2_fck",
- .prcm = {
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dss_core_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_addrs,
+ .fw = {
.omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCSPI2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCSPI2_SHIFT,
- },
+ .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+ .flags = OMAP_FIREWALL_L4,
+ }
},
- .slaves = omap34xx_mcspi2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi2_slaves),
- .class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi2_dev_attr,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* mcspi3 */
-static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = {
- { .name = "irq", .irq = 91 }, /* 91 */
- { .irq = -1 }
+/* l4_core -> dss_dispc */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dss_dispc_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_dispc_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 15 },
- { .name = "rx0", .dma_req = 16 },
- { .name = "tx1", .dma_req = 23 },
- { .name = "rx1", .dma_req = 24 },
- { .dma_req = -1 }
+static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = {
+ {
+ .pa_start = 0x4804FC00,
+ .pa_end = 0x4804FFFF,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = {
- &omap34xx_l4_core__mcspi3,
+/* l4_core -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dss_dsi1_hwmod,
+ .clk = "dss_ick",
+ .addr = omap3xxx_dss_dsi1_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = {
- .num_chipselect = 2,
+/* l4_core -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dss_rfbi_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_rfbi_addrs,
+ .fw = {
+ .omap2 = {
+ .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP ,
+ .flags = OMAP_FIREWALL_L4,
+ }
+ },
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_mcspi3 = {
- .name = "mcspi3",
- .mpu_irqs = omap34xx_mcspi3_mpu_irqs,
- .sdma_reqs = omap34xx_mcspi3_sdma_reqs,
- .main_clk = "mcspi3_fck",
- .prcm = {
+/* l4_core -> dss_venc */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dss_venc_hwmod,
+ .clk = "dss_ick",
+ .addr = omap2_dss_venc_addrs,
+ .fw = {
.omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCSPI3_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCSPI3_SHIFT,
- },
+ .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION,
+ .l4_prot_group = OMAP3_L4_CORE_FW_DSS_PROT_GROUP,
+ .flags = OMAP_FIREWALL_L4,
+ }
},
- .slaves = omap34xx_mcspi3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi3_slaves),
- .class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi3_dev_attr,
+ .flags = OCPIF_SWSUP_IDLE,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* SPI4 */
-static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = {
- { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */
- { .irq = -1 }
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
+ {
+ .pa_start = 0x48310000,
+ .pa_end = 0x483101ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = {
- { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */
- { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */
- { .dma_req = -1 }
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+ .master = &omap3xxx_l4_wkup_hwmod,
+ .slave = &omap3xxx_gpio1_hwmod,
+ .addr = omap3xxx_gpio1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = {
- &omap34xx_l4_core__mcspi4,
+/* l4_per -> gpio2 */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
+ {
+ .pa_start = 0x49050000,
+ .pa_end = 0x490501ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = {
- .num_chipselect = 1,
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio2_hwmod,
+ .addr = omap3xxx_gpio2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap34xx_mcspi4 = {
- .name = "mcspi4",
- .mpu_irqs = omap34xx_mcspi4_mpu_irqs,
- .sdma_reqs = omap34xx_mcspi4_sdma_reqs,
- .main_clk = "mcspi4_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MCSPI4_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MCSPI4_SHIFT,
- },
+/* l4_per -> gpio3 */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
+ {
+ .pa_start = 0x49052000,
+ .pa_end = 0x490521ff,
+ .flags = ADDR_TYPE_RT
},
- .slaves = omap34xx_mcspi4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap34xx_mcspi4_slaves),
- .class = &omap34xx_mcspi_class,
- .dev_attr = &omap_mcspi4_dev_attr,
+ { }
};
-/*
- * usbhsotg
- */
-static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = {
- .rev_offs = 0x0400,
- .sysc_offs = 0x0404,
- .syss_offs = 0x0408,
- .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE|
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio3_hwmod,
+ .addr = omap3xxx_gpio3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_class usbotg_class = {
- .name = "usbotg",
- .sysc = &omap3xxx_usbhsotg_sysc,
+/* l4_per -> gpio4 */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
+ {
+ .pa_start = 0x49054000,
+ .pa_end = 0x490541ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = {
- { .name = "mc", .irq = 92 },
- { .name = "dma", .irq = 93 },
- { .irq = -1 }
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio4_hwmod,
+ .addr = omap3xxx_gpio4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
- .name = "usb_otg_hs",
- .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs,
- .main_clk = "hsotgusb_ick",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_HSOTGUSB_SHIFT,
- .module_offs = CORE_MOD,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT,
- .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT
- },
+/* l4_per -> gpio5 */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
+ {
+ .pa_start = 0x49056000,
+ .pa_end = 0x490561ff,
+ .flags = ADDR_TYPE_RT
},
- .masters = omap3xxx_usbhsotg_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_masters),
- .slaves = omap3xxx_usbhsotg_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_slaves),
- .class = &usbotg_class,
-
- /*
- * Erratum ID: i479 idle_req / idle_ack mechanism potentially
- * broken when autoidle is enabled
- * workaround is to disable the autoidle bit at module level.
- */
- .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
- | HWMOD_SWSUP_MSTANDBY,
+ { }
};
-/* usb_otg_hs */
-static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = {
-
- { .name = "mc", .irq = 71 },
- { .irq = -1 }
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio5_hwmod,
+ .addr = omap3xxx_gpio5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_class am35xx_usbotg_class = {
- .name = "am35xx_usbotg",
- .sysc = NULL,
+/* l4_per -> gpio6 */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
+ {
+ .pa_start = 0x49058000,
+ .pa_end = 0x490581ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod am35xx_usbhsotg_hwmod = {
- .name = "am35x_otg_hs",
- .mpu_irqs = am35xx_usbhsotg_mpu_irqs,
- .main_clk = NULL,
- .prcm = {
- .omap2 = {
- },
- },
- .masters = am35xx_usbhsotg_masters,
- .masters_cnt = ARRAY_SIZE(am35xx_usbhsotg_masters),
- .slaves = am35xx_usbhsotg_slaves,
- .slaves_cnt = ARRAY_SIZE(am35xx_usbhsotg_slaves),
- .class = &am35xx_usbotg_class,
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_gpio6_hwmod,
+ .addr = omap3xxx_gpio6_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* MMC/SD/SDIO common */
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
+ .master = &omap3xxx_dma_system_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
-static struct omap_hwmod_class_sysconfig omap34xx_mmc_sysc = {
- .rev_offs = 0x1fc,
- .sysc_offs = 0x10,
- .syss_offs = 0x14,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
+ {
+ .pa_start = 0x48056000,
+ .pa_end = 0x48056fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_class omap34xx_mmc_class = {
- .name = "mmc",
- .sysc = &omap34xx_mmc_sysc,
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_dma_system_hwmod,
+ .clk = "core_l4_ick",
+ .addr = omap3xxx_dma_system_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* MMC/SD/SDIO1 */
-
-static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = {
- { .irq = 83, },
- { .irq = -1 }
+static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x48074000,
+ .pa_end = 0x480740ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = {
- { .name = "tx", .dma_req = 61, },
- { .name = "rx", .dma_req = 62, },
- { .dma_req = -1 }
+/* l4_core -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_mcbsp1_hwmod,
+ .clk = "mcbsp1_ick",
+ .addr = omap3xxx_mcbsp1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = {
- { .role = "dbck", .clk = "omap_32k_fck", },
+static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x49022000,
+ .pa_end = 0x490220ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_ocp_if *omap3xxx_mmc1_slaves[] = {
- &omap3xxx_l4_core__mmc1,
+/* l4_per -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_mcbsp2_hwmod,
+ .clk = "mcbsp2_ick",
+ .addr = omap3xxx_mcbsp2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
- .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x49024000,
+ .pa_end = 0x490240ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
- .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
- OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
+/* l4_per -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_mcbsp3_hwmod,
+ .clk = "mcbsp3_ick",
+ .addr = omap3xxx_mcbsp3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
- .name = "mmc1",
- .mpu_irqs = omap34xx_mmc1_mpu_irqs,
- .sdma_reqs = omap34xx_mmc1_sdma_reqs,
- .opt_clks = omap34xx_mmc1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
- .main_clk = "mmchs1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MMC1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
- },
+static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x49026000,
+ .pa_end = 0x490260ff,
+ .flags = ADDR_TYPE_RT
},
- .dev_attr = &mmc1_pre_es3_dev_attr,
- .slaves = omap3xxx_mmc1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
- .class = &omap34xx_mmc_class,
+ { }
};
-static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
- .name = "mmc1",
- .mpu_irqs = omap34xx_mmc1_mpu_irqs,
- .sdma_reqs = omap34xx_mmc1_sdma_reqs,
- .opt_clks = omap34xx_mmc1_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
- .main_clk = "mmchs1_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MMC1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
- },
- },
- .dev_attr = &mmc1_dev_attr,
- .slaves = omap3xxx_mmc1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
- .class = &omap34xx_mmc_class,
+/* l4_per -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_mcbsp4_hwmod,
+ .clk = "mcbsp4_ick",
+ .addr = omap3xxx_mcbsp4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/* MMC/SD/SDIO2 */
-
-static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = {
- { .irq = INT_24XX_MMC2_IRQ, },
- { .irq = -1 }
+static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x48096000,
+ .pa_end = 0x480960ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = {
- { .name = "tx", .dma_req = 47, },
- { .name = "rx", .dma_req = 48, },
- { .dma_req = -1 }
+/* l4_core -> mcbsp5 */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_mcbsp5_hwmod,
+ .clk = "mcbsp5_ick",
+ .addr = omap3xxx_mcbsp5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = {
- { .role = "dbck", .clk = "omap_32k_fck", },
+static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = {
+ {
+ .name = "sidetone",
+ .pa_start = 0x49028000,
+ .pa_end = 0x490280ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = {
- &omap3xxx_l4_core__mmc2,
+/* l4_per -> mcbsp2_sidetone */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_mcbsp2_sidetone_hwmod,
+ .clk = "mcbsp2_ick",
+ .addr = omap3xxx_mcbsp2_sidetone_addrs,
+ .user = OCP_USER_MPU,
};
-/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
- .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = {
+ {
+ .name = "sidetone",
+ .pa_start = 0x4902A000,
+ .pa_end = 0x4902A0ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
- .name = "mmc2",
- .mpu_irqs = omap34xx_mmc2_mpu_irqs,
- .sdma_reqs = omap34xx_mmc2_sdma_reqs,
- .opt_clks = omap34xx_mmc2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
- .main_clk = "mmchs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MMC2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
- },
- },
- .dev_attr = &mmc2_pre_es3_dev_attr,
- .slaves = omap3xxx_mmc2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
- .class = &omap34xx_mmc_class,
+/* l4_per -> mcbsp3_sidetone */
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
+ .master = &omap3xxx_l4_per_hwmod,
+ .slave = &omap3xxx_mcbsp3_sidetone_hwmod,
+ .clk = "mcbsp3_ick",
+ .addr = omap3xxx_mcbsp3_sidetone_addrs,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
- .name = "mmc2",
- .mpu_irqs = omap34xx_mmc2_mpu_irqs,
- .sdma_reqs = omap34xx_mmc2_sdma_reqs,
- .opt_clks = omap34xx_mmc2_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
- .main_clk = "mmchs2_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MMC2_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
- },
+static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
+ {
+ .pa_start = 0x48094000,
+ .pa_end = 0x480941ff,
+ .flags = ADDR_TYPE_RT,
},
- .slaves = omap3xxx_mmc2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
- .class = &omap34xx_mmc_class,
+ { }
};
-/* MMC/SD/SDIO3 */
+/* l4_core -> mailbox */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_mailbox_hwmod,
+ .addr = omap3xxx_mailbox_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
-static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = {
- { .irq = 94, },
- { .irq = -1 }
+/* l4 core -> mcspi1 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_mcspi1,
+ .clk = "mcspi1_ick",
+ .addr = omap2_mcspi1_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = {
- { .name = "tx", .dma_req = 77, },
- { .name = "rx", .dma_req = 78, },
- { .dma_req = -1 }
+/* l4 core -> mcspi2 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_mcspi2,
+ .clk = "mcspi2_ick",
+ .addr = omap2_mcspi2_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = {
- { .role = "dbck", .clk = "omap_32k_fck", },
+/* l4 core -> mcspi3 interface */
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_mcspi3,
+ .clk = "mcspi3_ick",
+ .addr = omap2430_mcspi3_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = {
- &omap3xxx_l4_core__mmc3,
+/* l4 core -> mcspi4 interface */
+static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = {
+ {
+ .pa_start = 0x480ba000,
+ .pa_end = 0x480ba0ff,
+ .flags = ADDR_TYPE_RT,
+ },
+ { }
};
-static struct omap_hwmod omap3xxx_mmc3_hwmod = {
- .name = "mmc3",
- .mpu_irqs = omap34xx_mmc3_mpu_irqs,
- .sdma_reqs = omap34xx_mmc3_sdma_reqs,
- .opt_clks = omap34xx_mmc3_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks),
- .main_clk = "mmchs3_fck",
- .prcm = {
- .omap2 = {
- .prcm_reg_id = 1,
- .module_bit = OMAP3430_EN_MMC3_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430_ST_MMC3_SHIFT,
- },
- },
- .slaves = omap3xxx_mmc3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc3_slaves),
- .class = &omap34xx_mmc_class,
+static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap34xx_mcspi4,
+ .clk = "mcspi4_ick",
+ .addr = omap34xx_mcspi4_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
.master = &omap3xxx_usb_host_hs_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.user = OCP_USER_MPU,
};
-static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
- SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
- SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
- .name = "usb_host_hs",
- .sysc = &omap3xxx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
- &omap3xxx_usb_host_hs__l3_main_2,
-};
-
static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
{
.name = "uhh",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
- &omap3xxx_l4_core__usb_host_hs,
-};
-
-static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
- { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
-};
-
-static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
- { .name = "ohci-irq", .irq = 76 },
- { .name = "ehci-irq", .irq = 77 },
- { .irq = -1 }
-};
-
-static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
- .name = "usb_host_hs",
- .class = &omap3xxx_usb_host_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .mpu_irqs = omap3xxx_usb_host_hs_irqs,
- .main_clk = "usbhost_48m_fck",
- .prcm = {
- .omap2 = {
- .module_offs = OMAP3430ES2_USBHOST_MOD,
- .prcm_reg_id = 1,
- .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
- .idlest_reg_id = 1,
- .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
- .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
- },
- },
- .opt_clks = omap3xxx_usb_host_hs_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
- .slaves = omap3xxx_usb_host_hs_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
- .masters = omap3xxx_usb_host_hs_masters,
- .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
-
- /*
- * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- * id: i660
- *
- * Description:
- * In the following configuration :
- * - USBHOST module is set to smart-idle mode
- * - PRCM asserts idle_req to the USBHOST module ( This typically
- * happens when the system is going to a low power mode : all ports
- * have been suspended, the master part of the USBHOST module has
- * entered the standby state, and SW has cut the functional clocks)
- * - an USBHOST interrupt occurs before the module is able to answer
- * idle_ack, typically a remote wakeup IRQ.
- * Then the USB HOST module will enter a deadlock situation where it
- * is no more accessible nor functional.
- *
- * Workaround:
- * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
- */
-
- /*
- * Errata: USB host EHCI may stall when entering smart-standby mode
- * Id: i571
- *
- * Description:
- * When the USBHOST module is set to smart-standby mode, and when it is
- * ready to enter the standby state (i.e. all ports are suspended and
- * all attached devices are in suspend mode), then it can wrongly assert
- * the Mstandby signal too early while there are still some residual OCP
- * transactions ongoing. If this condition occurs, the internal state
- * machine may go to an undefined state and the USB link may be stuck
- * upon the next resume.
- *
- * Workaround:
- * Don't use smart standby; use only force standby,
- * hence HWMOD_SWSUP_MSTANDBY
- */
-
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
-
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
- .name = "usb_tll_hs",
- .sysc = &omap3xxx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
- { .name = "tll-irq", .irq = 78 },
- { .irq = -1 }
-};
-
static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
{
.name = "tll",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
- &omap3xxx_l4_core__usb_tll_hs,
-};
-
-static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
- .name = "usb_tll_hs",
- .class = &omap3xxx_usb_tll_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .mpu_irqs = omap3xxx_usb_tll_hs_irqs,
- .main_clk = "usbtll_fck",
- .prcm = {
- .omap2 = {
- .module_offs = CORE_MOD,
- .prcm_reg_id = 3,
- .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
- .idlest_reg_id = 3,
- .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
- },
- },
- .slaves = omap3xxx_usb_tll_hs_slaves,
- .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
-};
-
-static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
- &omap3xxx_l3_main_hwmod,
- &omap3xxx_l4_core_hwmod,
- &omap3xxx_l4_per_hwmod,
- &omap3xxx_l4_wkup_hwmod,
- &omap3xxx_mmc3_hwmod,
- &omap3xxx_mpu_hwmod,
-
- &omap3xxx_timer1_hwmod,
- &omap3xxx_timer2_hwmod,
- &omap3xxx_timer3_hwmod,
- &omap3xxx_timer4_hwmod,
- &omap3xxx_timer5_hwmod,
- &omap3xxx_timer6_hwmod,
- &omap3xxx_timer7_hwmod,
- &omap3xxx_timer8_hwmod,
- &omap3xxx_timer9_hwmod,
- &omap3xxx_timer10_hwmod,
- &omap3xxx_timer11_hwmod,
-
- &omap3xxx_wd_timer2_hwmod,
- &omap3xxx_uart1_hwmod,
- &omap3xxx_uart2_hwmod,
- &omap3xxx_uart3_hwmod,
-
- /* i2c class */
- &omap3xxx_i2c1_hwmod,
- &omap3xxx_i2c2_hwmod,
- &omap3xxx_i2c3_hwmod,
-
- /* gpio class */
- &omap3xxx_gpio1_hwmod,
- &omap3xxx_gpio2_hwmod,
- &omap3xxx_gpio3_hwmod,
- &omap3xxx_gpio4_hwmod,
- &omap3xxx_gpio5_hwmod,
- &omap3xxx_gpio6_hwmod,
-
- /* dma_system class*/
- &omap3xxx_dma_system_hwmod,
-
- /* mcbsp class */
- &omap3xxx_mcbsp1_hwmod,
- &omap3xxx_mcbsp2_hwmod,
- &omap3xxx_mcbsp3_hwmod,
- &omap3xxx_mcbsp4_hwmod,
- &omap3xxx_mcbsp5_hwmod,
- &omap3xxx_mcbsp2_sidetone_hwmod,
- &omap3xxx_mcbsp3_sidetone_hwmod,
-
-
- /* mcspi class */
- &omap34xx_mcspi1,
- &omap34xx_mcspi2,
- &omap34xx_mcspi3,
- &omap34xx_mcspi4,
-
+static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l3_main__l4_core,
+ &omap3xxx_l3_main__l4_per,
+ &omap3xxx_mpu__l3_main,
+ &omap3xxx_l4_core__l4_wkup,
+ &omap3xxx_l4_core__mmc3,
+ &omap3_l4_core__uart1,
+ &omap3_l4_core__uart2,
+ &omap3_l4_per__uart3,
+ &omap3_l4_core__i2c1,
+ &omap3_l4_core__i2c2,
+ &omap3_l4_core__i2c3,
+ &omap3xxx_l4_wkup__l4_sec,
+ &omap3xxx_l4_wkup__timer1,
+ &omap3xxx_l4_per__timer2,
+ &omap3xxx_l4_per__timer3,
+ &omap3xxx_l4_per__timer4,
+ &omap3xxx_l4_per__timer5,
+ &omap3xxx_l4_per__timer6,
+ &omap3xxx_l4_per__timer7,
+ &omap3xxx_l4_per__timer8,
+ &omap3xxx_l4_per__timer9,
+ &omap3xxx_l4_core__timer10,
+ &omap3xxx_l4_core__timer11,
+ &omap3xxx_l4_wkup__wd_timer2,
+ &omap3xxx_l4_wkup__gpio1,
+ &omap3xxx_l4_per__gpio2,
+ &omap3xxx_l4_per__gpio3,
+ &omap3xxx_l4_per__gpio4,
+ &omap3xxx_l4_per__gpio5,
+ &omap3xxx_l4_per__gpio6,
+ &omap3xxx_dma_system__l3,
+ &omap3xxx_l4_core__dma_system,
+ &omap3xxx_l4_core__mcbsp1,
+ &omap3xxx_l4_per__mcbsp2,
+ &omap3xxx_l4_per__mcbsp3,
+ &omap3xxx_l4_per__mcbsp4,
+ &omap3xxx_l4_core__mcbsp5,
+ &omap3xxx_l4_per__mcbsp2_sidetone,
+ &omap3xxx_l4_per__mcbsp3_sidetone,
+ &omap34xx_l4_core__mcspi1,
+ &omap34xx_l4_core__mcspi2,
+ &omap34xx_l4_core__mcspi3,
+ &omap34xx_l4_core__mcspi4,
NULL,
};
-/* GP-only hwmods */
-static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = {
- &omap3xxx_timer12_hwmod,
+/* GP-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3xxx_gp_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_sec__timer12,
NULL
};
-/* 3430ES1-only hwmods */
-static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3430es1_dss_core_hwmod,
+/* 3430ES1-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
+ &omap3430es1_dss__l3,
+ &omap3430es1_l4_core__dss,
NULL
};
-/* 3430ES2+-only hwmods */
-static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_dss_core_hwmod,
- &omap3xxx_usbhsotg_hwmod,
- &omap3xxx_usb_host_hs_hwmod,
- &omap3xxx_usb_tll_hs_hwmod,
+/* 3430ES2+-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430es2plus_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_dss__l3,
+ &omap3xxx_l4_core__dss,
+ &omap3xxx_usbhsotg__l3,
+ &omap3xxx_l4_core__usbhsotg,
+ &omap3xxx_usb_host_hs__l3_main_2,
+ &omap3xxx_l4_core__usb_host_hs,
+ &omap3xxx_l4_core__usb_tll_hs,
NULL
};
-/* <= 3430ES3-only hwmods */
-static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
- &omap3xxx_pre_es3_mmc1_hwmod,
- &omap3xxx_pre_es3_mmc2_hwmod,
+/* <= 3430ES3-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430_pre_es3_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__pre_es3_mmc1,
+ &omap3xxx_l4_core__pre_es3_mmc2,
NULL
};
-/* 3430ES3+-only hwmods */
-static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
- &omap3xxx_es3plus_mmc1_hwmod,
- &omap3xxx_es3plus_mmc2_hwmod,
+/* 3430ES3+-only hwmod links */
+static struct omap_hwmod_ocp_if *omap3430_es3plus_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__es3plus_mmc1,
+ &omap3xxx_l4_core__es3plus_mmc2,
NULL
};
-/* 34xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap34xx_hwmods[] = {
- &omap3xxx_iva_hwmod,
- &omap34xx_sr1_hwmod,
- &omap34xx_sr2_hwmod,
- &omap3xxx_mailbox_hwmod,
+/* 34xx-only hwmod links (all ES revisions) */
+static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l3__iva,
+ &omap34xx_l4_core__sr1,
+ &omap34xx_l4_core__sr2,
+ &omap3xxx_l4_core__mailbox,
NULL
};
-/* 36xx-only hwmods (all ES revisions) */
-static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
- &omap3xxx_iva_hwmod,
- &omap3xxx_uart4_hwmod,
- &omap3xxx_dss_core_hwmod,
- &omap36xx_sr1_hwmod,
- &omap36xx_sr2_hwmod,
- &omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
- &omap3xxx_usb_host_hs_hwmod,
- &omap3xxx_usb_tll_hs_hwmod,
- &omap3xxx_es3plus_mmc1_hwmod,
- &omap3xxx_es3plus_mmc2_hwmod,
+/* 36xx-only hwmod links (all ES revisions) */
+static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l3__iva,
+ &omap36xx_l4_per__uart4,
+ &omap3xxx_dss__l3,
+ &omap3xxx_l4_core__dss,
+ &omap36xx_l4_core__sr1,
+ &omap36xx_l4_core__sr2,
+ &omap3xxx_usbhsotg__l3,
+ &omap3xxx_l4_core__usbhsotg,
+ &omap3xxx_l4_core__mailbox,
+ &omap3xxx_usb_host_hs__l3_main_2,
+ &omap3xxx_l4_core__usb_host_hs,
+ &omap3xxx_l4_core__usb_tll_hs,
+ &omap3xxx_l4_core__es3plus_mmc1,
+ &omap3xxx_l4_core__es3plus_mmc2,
NULL
};
-static __initdata struct omap_hwmod *am35xx_hwmods[] = {
- &omap3xxx_dss_core_hwmod, /* XXX ??? */
- &am35xx_usbhsotg_hwmod,
- &am35xx_uart4_hwmod,
- &omap3xxx_usb_host_hs_hwmod,
- &omap3xxx_usb_tll_hs_hwmod,
- &omap3xxx_es3plus_mmc1_hwmod,
- &omap3xxx_es3plus_mmc2_hwmod,
+static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_dss__l3,
+ &omap3xxx_l4_core__dss,
+ &am35xx_usbhsotg__l3,
+ &am35xx_l4_core__usbhsotg,
+ &am35xx_l4_core__uart4,
+ &omap3xxx_usb_host_hs__l3_main_2,
+ &omap3xxx_l4_core__usb_host_hs,
+ &omap3xxx_l4_core__usb_tll_hs,
+ &omap3xxx_l4_core__es3plus_mmc1,
+ &omap3xxx_l4_core__es3plus_mmc2,
NULL
};
-static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
- /* dss class */
- &omap3xxx_dss_dispc_hwmod,
- &omap3xxx_dss_dsi1_hwmod,
- &omap3xxx_dss_rfbi_hwmod,
- &omap3xxx_dss_venc_hwmod,
+static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
+ &omap3xxx_l4_core__dss_dispc,
+ &omap3xxx_l4_core__dss_dsi1,
+ &omap3xxx_l4_core__dss_rfbi,
+ &omap3xxx_l4_core__dss_venc,
NULL
};
int __init omap3xxx_hwmod_init(void)
{
int r;
- struct omap_hwmod **h = NULL;
+ struct omap_hwmod_ocp_if **h = NULL;
unsigned int rev;
- /* Register hwmods common to all OMAP3 */
- r = omap_hwmod_register(omap3xxx_hwmods);
+ /* Register hwmod links common to all OMAP3 */
+ r = omap_hwmod_register_links(omap3xxx_hwmod_ocp_ifs);
if (r < 0)
return r;
- /* Register GP-only hwmods. */
+ /* Register GP-only hwmod links. */
if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
- r = omap_hwmod_register(omap3xxx_gp_hwmods);
+ r = omap_hwmod_register_links(omap3xxx_gp_hwmod_ocp_ifs);
if (r < 0)
return r;
}
rev = omap_rev();
/*
- * Register hwmods common to individual OMAP3 families, all
+ * Register hwmod links common to individual OMAP3 families, all
* silicon revisions (e.g., 34xx, or AM3505/3517, or 36xx)
* All possible revisions should be included in this conditional.
*/
if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
rev == OMAP3430_REV_ES2_1 || rev == OMAP3430_REV_ES3_0 ||
rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
- h = omap34xx_hwmods;
+ h = omap34xx_hwmod_ocp_ifs;
} else if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1) {
- h = am35xx_hwmods;
+ h = am35xx_hwmod_ocp_ifs;
} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
rev == OMAP3630_REV_ES1_2) {
- h = omap36xx_hwmods;
+ h = omap36xx_hwmod_ocp_ifs;
} else {
WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
return -EINVAL;
};
- r = omap_hwmod_register(h);
+ r = omap_hwmod_register_links(h);
if (r < 0)
return r;
/*
- * Register hwmods specific to certain ES levels of a
+ * Register hwmod links specific to certain ES levels of a
* particular family of silicon (e.g., 34xx ES1.0)
*/
h = NULL;
if (rev == OMAP3430_REV_ES1_0) {
- h = omap3430es1_hwmods;
+ h = omap3430es1_hwmod_ocp_ifs;
} else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
- h = omap3430es2plus_hwmods;
+ h = omap3430es2plus_hwmod_ocp_ifs;
};
if (h) {
- r = omap_hwmod_register(h);
+ r = omap_hwmod_register_links(h);
if (r < 0)
return r;
}
h = NULL;
if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
rev == OMAP3430_REV_ES2_1) {
- h = omap3430_pre_es3_hwmods;
+ h = omap3430_pre_es3_hwmod_ocp_ifs;
} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
- h = omap3430_es3plus_hwmods;
+ h = omap3430_es3plus_hwmod_ocp_ifs;
};
if (h)
- r = omap_hwmod_register(h);
+ r = omap_hwmod_register_links(h);
if (r < 0)
return r;
/*
* DSS code presumes that dss_core hwmod is handled first,
* _before_ any other DSS related hwmods so register common
- * DSS hwmods last to ensure that dss_core is already registered.
- * Otherwise some change things may happen, for ex. if dispc
- * is handled before dss_core and DSS is enabled in bootloader
- * DIPSC will be reset with outputs enabled which sometimes leads
- * to unrecoverable L3 error.
- * XXX The long-term fix to this is to ensure modules are set up
- * in dependency order in the hwmod core code.
+ * DSS hwmod links last to ensure that dss_core is already
+ * registered. Otherwise some change things may happen, for
+ * ex. if dispc is handled before dss_core and DSS is enabled
+ * in bootloader DISPC will be reset with outputs enabled
+ * which sometimes leads to unrecoverable L3 error. XXX The
+ * long-term fix to this is to ensure hwmods are set up in
+ * dependency order in the hwmod core code.
*/
- r = omap_hwmod_register(omap3xxx_dss_hwmods);
+ r = omap_hwmod_register_links(omap3xxx_dss_hwmod_ocp_ifs);
return r;
}
/*
* Hardware modules present on the OMAP44xx chips
*
- * Copyright (C) 2009-2011 Texas Instruments, Inc.
+ * Copyright (C) 2009-2012 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley
#define OMAP44XX_IRQ_GIC_START 32
/* Base offset for all OMAP4 dma requests */
-#define OMAP44XX_DMA_REQ_START 1
-
-/* Backward references (IPs with Bus Master capability) */
-static struct omap_hwmod omap44xx_aess_hwmod;
-static struct omap_hwmod omap44xx_dma_system_hwmod;
-static struct omap_hwmod omap44xx_dmm_hwmod;
-static struct omap_hwmod omap44xx_dsp_hwmod;
-static struct omap_hwmod omap44xx_dss_hwmod;
-static struct omap_hwmod omap44xx_emif_fw_hwmod;
-static struct omap_hwmod omap44xx_hsi_hwmod;
-static struct omap_hwmod omap44xx_ipu_hwmod;
-static struct omap_hwmod omap44xx_iss_hwmod;
-static struct omap_hwmod omap44xx_iva_hwmod;
-static struct omap_hwmod omap44xx_l3_instr_hwmod;
-static struct omap_hwmod omap44xx_l3_main_1_hwmod;
-static struct omap_hwmod omap44xx_l3_main_2_hwmod;
-static struct omap_hwmod omap44xx_l3_main_3_hwmod;
-static struct omap_hwmod omap44xx_l4_abe_hwmod;
-static struct omap_hwmod omap44xx_l4_cfg_hwmod;
-static struct omap_hwmod omap44xx_l4_per_hwmod;
-static struct omap_hwmod omap44xx_l4_wkup_hwmod;
-static struct omap_hwmod omap44xx_mmc1_hwmod;
-static struct omap_hwmod omap44xx_mmc2_hwmod;
-static struct omap_hwmod omap44xx_mpu_hwmod;
-static struct omap_hwmod omap44xx_mpu_private_hwmod;
-static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
+#define OMAP44XX_DMA_REQ_START 1
/*
- * Interconnects omap_hwmod structures
- * hwmods that compose the global OMAP interconnect
+ * IP blocks
*/
/*
{ .irq = -1 }
};
-/* l3_main_1 -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_dmm_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
- {
- .pa_start = 0x4e000000,
- .pa_end = 0x4e0007ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* mpu -> dmm */
-static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_dmm_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_dmm_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dmm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = {
- &omap44xx_l3_main_1__dmm,
- &omap44xx_mpu__dmm,
-};
-
static struct omap_hwmod omap44xx_dmm_hwmod = {
.name = "dmm",
.class = &omap44xx_dmm_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
+ .mpu_irqs = omap44xx_dmm_irqs,
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_dmm_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves),
- .mpu_irqs = omap44xx_dmm_irqs,
};
/*
};
/* emif_fw */
-/* dmm -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
- .master = &omap44xx_dmm_hwmod,
- .slave = &omap44xx_emif_fw_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
- {
- .pa_start = 0x4a20c000,
- .pa_end = 0x4a20c0ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> emif_fw */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_emif_fw_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_emif_fw_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* emif_fw slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = {
- &omap44xx_dmm__emif_fw,
- &omap44xx_l4_cfg__emif_fw,
-};
-
static struct omap_hwmod omap44xx_emif_fw_hwmod = {
.name = "emif_fw",
.class = &omap44xx_emif_fw_hwmod_class,
.context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_emif_fw_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves),
};
/*
};
/* l3_instr */
-/* iva -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
- .master = &omap44xx_iva_hwmod,
- .slave = &omap44xx_l3_instr_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 -> l3_instr */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
- .master = &omap44xx_l3_main_3_hwmod,
- .slave = &omap44xx_l3_instr_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_instr slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
- &omap44xx_iva__l3_instr,
- &omap44xx_l3_main_3__l3_instr,
-};
-
static struct omap_hwmod omap44xx_l3_instr_hwmod = {
.name = "l3_instr",
.class = &omap44xx_l3_hwmod_class,
.modulemode = MODULEMODE_HWCTRL,
},
},
- .slaves = omap44xx_l3_instr_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves),
};
/* l3_main_1 */
{ .irq = -1 }
};
-/* dsp -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
- .master = &omap44xx_dsp_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dss -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
- .master = &omap44xx_dss_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = {
- .master = &omap44xx_mmc1_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = {
- .master = &omap44xx_mmc2_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = {
- {
- .pa_start = 0x44000000,
- .pa_end = 0x44000fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* mpu -> l3_main_1 */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_l3_main_1_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_l3_main_1_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
- &omap44xx_dsp__l3_main_1,
- &omap44xx_dss__l3_main_1,
- &omap44xx_l3_main_2__l3_main_1,
- &omap44xx_l4_cfg__l3_main_1,
- &omap44xx_mmc1__l3_main_1,
- &omap44xx_mmc2__l3_main_1,
- &omap44xx_mpu__l3_main_1,
-};
-
static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
.name = "l3_main_1",
.class = &omap44xx_l3_hwmod_class,
.context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_l3_main_1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves),
};
/* l3_main_2 */
-/* dma_system -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
- .master = &omap44xx_dma_system_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
- .master = &omap44xx_hsi_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
- .master = &omap44xx_ipu_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
- .master = &omap44xx_iss_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iva -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
- .master = &omap44xx_iva_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = {
- {
- .pa_start = 0x44800000,
- .pa_end = 0x44801fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_1 -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_l3_main_2_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* l4_cfg -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = {
- .master = &omap44xx_usb_otg_hs_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
- &omap44xx_dma_system__l3_main_2,
- &omap44xx_hsi__l3_main_2,
- &omap44xx_ipu__l3_main_2,
- &omap44xx_iss__l3_main_2,
- &omap44xx_iva__l3_main_2,
- &omap44xx_l3_main_1__l3_main_2,
- &omap44xx_l4_cfg__l3_main_2,
- &omap44xx_usb_otg_hs__l3_main_2,
-};
-
static struct omap_hwmod omap44xx_l3_main_2_hwmod = {
.name = "l3_main_2",
.class = &omap44xx_l3_hwmod_class,
.context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_l3_main_2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves),
};
/* l3_main_3 */
-static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = {
- {
- .pa_start = 0x45000000,
- .pa_end = 0x45000fff,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
+ .name = "l3_main_3",
+ .class = &omap44xx_l3_hwmod_class,
+ .clkdm_name = "l3_instr_clkdm",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
},
- { }
-};
-
-/* l3_main_1 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_l3_main_3_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* l3_main_2 -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> l3_main_3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l3_main_3_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = {
- &omap44xx_l3_main_1__l3_main_3,
- &omap44xx_l3_main_2__l3_main_3,
- &omap44xx_l4_cfg__l3_main_3,
-};
-
-static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
- .name = "l3_main_3",
- .class = &omap44xx_l3_hwmod_class,
- .clkdm_name = "l3_instr_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
- .slaves = omap44xx_l3_main_3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves),
};
/*
};
/* l4_abe */
-/* aess -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
- .master = &omap44xx_aess_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
- .master = &omap44xx_dsp_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l3_main_1 -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu -> l4_abe */
-static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_l4_abe_hwmod,
- .clk = "ocp_abe_iclk",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_abe slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
- &omap44xx_aess__l4_abe,
- &omap44xx_dsp__l4_abe,
- &omap44xx_l3_main_1__l4_abe,
- &omap44xx_mpu__l4_abe,
-};
-
static struct omap_hwmod omap44xx_l4_abe_hwmod = {
.name = "l4_abe",
.class = &omap44xx_l4_hwmod_class,
.clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET,
},
},
- .slaves = omap44xx_l4_abe_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves),
};
/* l4_cfg */
-/* l3_main_1 -> l4_cfg */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
- .master = &omap44xx_l3_main_1_hwmod,
- .slave = &omap44xx_l4_cfg_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = {
- &omap44xx_l3_main_1__l4_cfg,
-};
-
static struct omap_hwmod omap44xx_l4_cfg_hwmod = {
.name = "l4_cfg",
.class = &omap44xx_l4_hwmod_class,
.context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_l4_cfg_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves),
};
/* l4_per */
-/* l3_main_2 -> l4_per */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_l4_per_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = {
- &omap44xx_l3_main_2__l4_per,
-};
-
static struct omap_hwmod omap44xx_l4_per_hwmod = {
.name = "l4_per",
.class = &omap44xx_l4_hwmod_class,
.context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_l4_per_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves),
};
/* l4_wkup */
-/* l4_cfg -> l4_wkup */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_l4_wkup_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_wkup slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = {
- &omap44xx_l4_cfg__l4_wkup,
-};
-
static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
.name = "l4_wkup",
.class = &omap44xx_l4_hwmod_class,
.context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_l4_wkup_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves),
};
/*
};
/* mpu_private */
-/* mpu -> mpu_private */
-static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
- .master = &omap44xx_mpu_hwmod,
- .slave = &omap44xx_mpu_private_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mpu_private slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = {
- &omap44xx_mpu__mpu_private,
-};
-
static struct omap_hwmod omap44xx_mpu_private_hwmod = {
.name = "mpu_private",
.class = &omap44xx_mpu_bus_hwmod_class,
.clkdm_name = "mpuss_clkdm",
- .slaves = omap44xx_mpu_private_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves),
};
/*
{ .dma_req = -1 }
};
-/* aess master ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_masters[] = {
- &omap44xx_aess__l4_abe,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
- {
- .pa_start = 0x401f1000,
- .pa_end = 0x401f13ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> aess */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_aess_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_aess_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
- {
- .pa_start = 0x490f1000,
- .pa_end = 0x490f13ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> aess (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_aess_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_aess_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* aess slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = {
- &omap44xx_l4_abe__aess,
- &omap44xx_l4_abe__aess_dma,
-};
-
static struct omap_hwmod omap44xx_aess_hwmod = {
.name = "aess",
.class = &omap44xx_aess_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_aess_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_aess_slaves),
- .masters = omap44xx_aess_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_aess_masters),
-};
-
-/*
- * 'bandgap' class
- * bangap reference for ldo regulators
- */
-
-static struct omap_hwmod_class omap44xx_bandgap_hwmod_class = {
- .name = "bandgap",
-};
-
-/* bandgap */
-static struct omap_hwmod_opt_clk bandgap_opt_clks[] = {
- { .role = "fclk", .clk = "bandgap_fclk" },
-};
-
-static struct omap_hwmod omap44xx_bandgap_hwmod = {
- .name = "bandgap",
- .class = &omap44xx_bandgap_hwmod_class,
- .clkdm_name = "l4_wkup_clkdm",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET,
- },
- },
- .opt_clks = bandgap_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(bandgap_opt_clks),
};
/*
};
/* counter_32k */
-static struct omap_hwmod omap44xx_counter_32k_hwmod;
-static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = {
- {
- .pa_start = 0x4a304000,
- .pa_end = 0x4a30401f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_wkup -> counter_32k */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_counter_32k_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .addr = omap44xx_counter_32k_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* counter_32k slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = {
- &omap44xx_l4_wkup__counter_32k,
-};
-
static struct omap_hwmod omap44xx_counter_32k_hwmod = {
.name = "counter_32k",
.class = &omap44xx_counter_hwmod_class,
.context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_counter_32k_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_counter_32k_slaves),
};
/*
{ .irq = -1 }
};
-/* dma_system master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
- &omap44xx_dma_system__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
- {
- .pa_start = 0x4a056000,
- .pa_end = 0x4a056fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> dma_system */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_dma_system_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dma_system_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dma_system slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
- &omap44xx_l4_cfg__dma_system,
-};
-
static struct omap_hwmod omap44xx_dma_system_hwmod = {
.name = "dma_system",
.class = &omap44xx_dma_hwmod_class,
},
},
.dev_attr = &dma_dev_attr,
- .slaves = omap44xx_dma_system_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dma_system_slaves),
- .masters = omap44xx_dma_system_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_dma_system_masters),
};
/*
};
/* dmic */
-static struct omap_hwmod omap44xx_dmic_hwmod;
static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = {
{ .irq = 114 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x4012e000,
- .pa_end = 0x4012e07f,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap44xx_dmic_hwmod = {
+ .name = "dmic",
+ .class = &omap44xx_dmic_hwmod_class,
+ .clkdm_name = "abe_clkdm",
+ .mpu_irqs = omap44xx_dmic_irqs,
+ .sdma_reqs = omap44xx_dmic_sdma_reqs,
+ .main_clk = "dmic_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
},
- { }
-};
-
-/* l4_abe -> dmic */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_dmic_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_dmic_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
- {
- .name = "dma",
- .pa_start = 0x4902e000,
- .pa_end = 0x4902e07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> dmic (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_dmic_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_dmic_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* dmic slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = {
- &omap44xx_l4_abe__dmic,
- &omap44xx_l4_abe__dmic_dma,
-};
-
-static struct omap_hwmod omap44xx_dmic_hwmod = {
- .name = "dmic",
- .class = &omap44xx_dmic_hwmod_class,
- .clkdm_name = "abe_clkdm",
- .mpu_irqs = omap44xx_dmic_irqs,
- .sdma_reqs = omap44xx_dmic_sdma_reqs,
- .main_clk = "dmic_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .slaves = omap44xx_dmic_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dmic_slaves),
};
/*
};
static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
- { .name = "mmu_cache", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_dsp_c0_resets[] = {
{ .name = "dsp", .rst_shift = 0 },
-};
-
-/* dsp -> iva */
-static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
- .master = &omap44xx_dsp_hwmod,
- .slave = &omap44xx_iva_hwmod,
- .clk = "dpll_iva_m5x2_ck",
-};
-
-/* dsp master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_masters[] = {
- &omap44xx_dsp__l3_main_1,
- &omap44xx_dsp__l4_abe,
- &omap44xx_dsp__iva,
-};
-
-/* l4_cfg -> dsp */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_dsp_hwmod,
- .clk = "l4_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* dsp slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = {
- &omap44xx_l4_cfg__dsp,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
- .name = "dsp_c0",
- .class = &omap44xx_dsp_hwmod_class,
- .clkdm_name = "tesla_clkdm",
- .flags = HWMOD_INIT_NO_RESET,
- .rst_lines = omap44xx_dsp_c0_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets),
- .prcm = {
- .omap4 = {
- .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET,
- },
- },
+ { .name = "mmu_cache", .rst_shift = 1 },
};
static struct omap_hwmod omap44xx_dsp_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
- .slaves = omap44xx_dsp_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dsp_slaves),
- .masters = omap44xx_dsp_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_dsp_masters),
};
/*
};
/* dss */
-/* dss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_masters[] = {
- &omap44xx_dss__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
- {
- .pa_start = 0x58000000,
- .pa_end = 0x5800007f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = {
- {
- .pa_start = 0x48040000,
- .pa_end = 0x4804007f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_slaves[] = {
- &omap44xx_l3_main_2__dss,
- &omap44xx_l4_per__dss,
-};
-
static struct omap_hwmod_opt_clk dss_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
{ .role = "tv_clk", .clk = "dss_tv_clk" },
},
.opt_clks = dss_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_opt_clks),
- .slaves = omap44xx_dss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_slaves),
- .masters = omap44xx_dss_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_dss_masters),
};
/*
};
/* dss_dispc */
-static struct omap_hwmod omap44xx_dss_dispc_hwmod;
static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = {
{ .irq = 25 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
- {
- .pa_start = 0x58001000,
- .pa_end = 0x58001fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_dispc_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_dispc_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
- {
- .pa_start = 0x48041000,
- .pa_end = 0x48041fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = {
.manager_count = 3,
.has_framedonetv_irq = 1
};
-/* l4_per -> dss_dispc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_dispc_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_dispc_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_dispc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = {
- &omap44xx_l3_main_2__dss_dispc,
- &omap44xx_l4_per__dss_dispc,
-};
-
static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap44xx_dispc_hwmod_class,
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_dss_dispc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves),
.dev_attr = &omap44xx_dss_dispc_dev_attr
};
};
/* dss_dsi1 */
-static struct omap_hwmod omap44xx_dss_dsi1_hwmod;
static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = {
{ .irq = 53 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
- {
- .pa_start = 0x58004000,
- .pa_end = 0x580041ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_dsi1_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_dsi1_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = {
- {
- .pa_start = 0x48044000,
- .pa_end = 0x480441ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss_dsi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_dsi1_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_dsi1_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_dsi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = {
- &omap44xx_l3_main_2__dss_dsi1,
- &omap44xx_l4_per__dss_dsi1,
-};
-
static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
};
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
- .slaves = omap44xx_dss_dsi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves),
};
/* dss_dsi2 */
-static struct omap_hwmod omap44xx_dss_dsi2_hwmod;
static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = {
{ .irq = 84 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
- {
- .pa_start = 0x58005000,
- .pa_end = 0x580051ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_dsi2_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_dsi2_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = {
- {
- .pa_start = 0x48045000,
- .pa_end = 0x480451ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss_dsi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_dsi2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_dsi2_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_dsi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = {
- &omap44xx_l3_main_2__dss_dsi2,
- &omap44xx_l4_per__dss_dsi2,
-};
-
static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = {
{ .role = "sys_clk", .clk = "dss_sys_clk" },
};
},
.opt_clks = dss_dsi2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
- .slaves = omap44xx_dss_dsi2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves),
};
/*
};
/* dss_hdmi */
-static struct omap_hwmod omap44xx_dss_hdmi_hwmod;
static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = {
{ .irq = 101 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
- {
- .pa_start = 0x58006000,
- .pa_end = 0x58006fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_hdmi_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_hdmi_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = {
- {
- .pa_start = 0x48046000,
- .pa_end = 0x48046fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss_hdmi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_hdmi_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_hdmi_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_hdmi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = {
- &omap44xx_l3_main_2__dss_hdmi,
- &omap44xx_l4_per__dss_hdmi,
-};
-
-static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
- { .role = "sys_clk", .clk = "dss_sys_clk" },
+static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = {
+ { .role = "sys_clk", .clk = "dss_sys_clk" },
};
static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
},
.opt_clks = dss_hdmi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
- .slaves = omap44xx_dss_hdmi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves),
};
/*
};
/* dss_rfbi */
-static struct omap_hwmod omap44xx_dss_rfbi_hwmod;
static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = {
{ .dma_req = 13 + OMAP44XX_DMA_REQ_START },
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
- {
- .pa_start = 0x58002000,
- .pa_end = 0x580020ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_rfbi_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_rfbi_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = {
- {
- .pa_start = 0x48042000,
- .pa_end = 0x480420ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss_rfbi */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_rfbi_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_rfbi_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_rfbi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = {
- &omap44xx_l3_main_2__dss_rfbi,
- &omap44xx_l4_per__dss_rfbi,
-};
-
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
{ .role = "ick", .clk = "dss_fck" },
};
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
- .slaves = omap44xx_dss_rfbi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves),
};
/*
};
/* dss_venc */
-static struct omap_hwmod omap44xx_dss_venc_hwmod;
-static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
- {
- .pa_start = 0x58003000,
- .pa_end = 0x580030ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_dss_venc_hwmod,
- .clk = "dss_fck",
- .addr = omap44xx_dss_venc_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = {
- {
- .pa_start = 0x48043000,
- .pa_end = 0x480430ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> dss_venc */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_dss_venc_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_dss_venc_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* dss_venc slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = {
- &omap44xx_l3_main_2__dss_venc,
- &omap44xx_l4_per__dss_venc,
-};
-
static struct omap_hwmod omap44xx_dss_venc_hwmod = {
.name = "dss_venc",
.class = &omap44xx_venc_hwmod_class,
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_dss_venc_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_dss_venc_slaves),
};
/*
};
/* gpio1 */
-static struct omap_hwmod omap44xx_gpio1_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = {
{ .irq = 29 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
- {
- .pa_start = 0x4a310000,
- .pa_end = 0x4a3101ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_wkup -> gpio1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_gpio1_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .addr = omap44xx_gpio1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = {
- &omap44xx_l4_wkup__gpio1,
-};
-
static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio1_dbclk" },
};
.opt_clks = gpio1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio1_slaves),
};
/* gpio2 */
-static struct omap_hwmod omap44xx_gpio2_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = {
{ .irq = 30 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
- {
- .pa_start = 0x48055000,
- .pa_end = 0x480551ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> gpio2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_gpio2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_gpio2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = {
- &omap44xx_l4_per__gpio2,
-};
-
static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio2_dbclk" },
};
.opt_clks = gpio2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio2_slaves),
};
/* gpio3 */
-static struct omap_hwmod omap44xx_gpio3_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = {
{ .irq = 31 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
- {
- .pa_start = 0x48057000,
- .pa_end = 0x480571ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> gpio3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_gpio3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_gpio3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = {
- &omap44xx_l4_per__gpio3,
-};
-
static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio3_dbclk" },
};
.opt_clks = gpio3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio3_slaves),
};
/* gpio4 */
-static struct omap_hwmod omap44xx_gpio4_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = {
{ .irq = 32 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
- {
- .pa_start = 0x48059000,
- .pa_end = 0x480591ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> gpio4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_gpio4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_gpio4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = {
- &omap44xx_l4_per__gpio4,
-};
-
static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio4_dbclk" },
};
.opt_clks = gpio4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio4_slaves),
};
/* gpio5 */
-static struct omap_hwmod omap44xx_gpio5_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = {
{ .irq = 33 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
- {
- .pa_start = 0x4805b000,
- .pa_end = 0x4805b1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> gpio5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_gpio5_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_gpio5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = {
- &omap44xx_l4_per__gpio5,
-};
-
static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio5_dbclk" },
};
.opt_clks = gpio5_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio5_slaves),
};
/* gpio6 */
-static struct omap_hwmod omap44xx_gpio6_hwmod;
static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = {
{ .irq = 34 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
- {
- .pa_start = 0x4805d000,
- .pa_end = 0x4805d1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> gpio6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_gpio6_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_gpio6_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* gpio6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = {
- &omap44xx_l4_per__gpio6,
-};
-
static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
{ .role = "dbclk", .clk = "gpio6_dbclk" },
};
.opt_clks = gpio6_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks),
.dev_attr = &gpio_dev_attr,
- .slaves = omap44xx_gpio6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_gpio6_slaves),
};
/*
{ .irq = -1 }
};
-/* hsi master ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_masters[] = {
- &omap44xx_hsi__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = {
- {
- .pa_start = 0x4a058000,
- .pa_end = 0x4a05bfff,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap44xx_hsi_hwmod = {
+ .name = "hsi",
+ .class = &omap44xx_hsi_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap44xx_hsi_irqs,
+ .main_clk = "hsi_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
},
- { }
-};
-
-/* l4_cfg -> hsi */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_hsi_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_hsi_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* hsi slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = {
- &omap44xx_l4_cfg__hsi,
-};
-
-static struct omap_hwmod omap44xx_hsi_hwmod = {
- .name = "hsi",
- .class = &omap44xx_hsi_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .mpu_irqs = omap44xx_hsi_irqs,
- .main_clk = "hsi_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
- },
- .slaves = omap44xx_hsi_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_hsi_slaves),
- .masters = omap44xx_hsi_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_hsi_masters),
};
/*
};
/* i2c1 */
-static struct omap_hwmod omap44xx_i2c1_hwmod;
static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
{ .irq = 56 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
- {
- .pa_start = 0x48070000,
- .pa_end = 0x480700ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> i2c1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_i2c1_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_i2c1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
- &omap44xx_l4_per__i2c1,
-};
-
static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_i2c1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves),
.dev_attr = &i2c_dev_attr,
};
/* i2c2 */
-static struct omap_hwmod omap44xx_i2c2_hwmod;
static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = {
{ .irq = 57 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
- {
- .pa_start = 0x48072000,
- .pa_end = 0x480720ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> i2c2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_i2c2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_i2c2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
- &omap44xx_l4_per__i2c2,
-};
-
static struct omap_hwmod omap44xx_i2c2_hwmod = {
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_i2c2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves),
.dev_attr = &i2c_dev_attr,
};
/* i2c3 */
-static struct omap_hwmod omap44xx_i2c3_hwmod;
static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = {
{ .irq = 61 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
- {
- .pa_start = 0x48060000,
- .pa_end = 0x480600ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> i2c3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_i2c3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_i2c3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
- &omap44xx_l4_per__i2c3,
-};
-
static struct omap_hwmod omap44xx_i2c3_hwmod = {
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_i2c3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves),
.dev_attr = &i2c_dev_attr,
};
/* i2c4 */
-static struct omap_hwmod omap44xx_i2c4_hwmod;
static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = {
{ .irq = 62 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
- {
- .pa_start = 0x48350000,
- .pa_end = 0x483500ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> i2c4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_i2c4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_i2c4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* i2c4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
- &omap44xx_l4_per__i2c4,
-};
-
static struct omap_hwmod omap44xx_i2c4_hwmod = {
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_i2c4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves),
.dev_attr = &i2c_dev_attr,
};
{ .irq = -1 }
};
-static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = {
+static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
{ .name = "cpu0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_c1_resets[] = {
{ .name = "cpu1", .rst_shift = 1 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = {
{ .name = "mmu_cache", .rst_shift = 2 },
};
-/* ipu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_masters[] = {
- &omap44xx_ipu__l3_main_2,
-};
-
-/* l3_main_2 -> ipu */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_ipu_hwmod,
- .clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* ipu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = {
- &omap44xx_l3_main_2__ipu,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c0_hwmod = {
- .name = "ipu_c0",
- .class = &omap44xx_ipu_hwmod_class,
- .clkdm_name = "ducati_clkdm",
- .flags = HWMOD_INIT_NO_RESET,
- .rst_lines = omap44xx_ipu_c0_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets),
- .prcm = {
- .omap4 = {
- .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
- },
- },
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_ipu_c1_hwmod = {
- .name = "ipu_c1",
- .class = &omap44xx_ipu_hwmod_class,
- .clkdm_name = "ducati_clkdm",
- .flags = HWMOD_INIT_NO_RESET,
- .rst_lines = omap44xx_ipu_c1_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets),
- .prcm = {
- .omap4 = {
- .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET,
- },
- },
-};
-
static struct omap_hwmod omap44xx_ipu_hwmod = {
.name = "ipu",
.class = &omap44xx_ipu_hwmod_class,
.modulemode = MODULEMODE_HWCTRL,
},
},
- .slaves = omap44xx_ipu_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_ipu_slaves),
- .masters = omap44xx_ipu_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_ipu_masters),
};
/*
{ .dma_req = -1 }
};
-/* iss master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_masters[] = {
- &omap44xx_iss__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = {
- {
- .pa_start = 0x52000000,
- .pa_end = 0x520000ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> iss */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_iss_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_iss_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* iss slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iss_slaves[] = {
- &omap44xx_l3_main_2__iss,
-};
-
static struct omap_hwmod_opt_clk iss_opt_clks[] = {
{ .role = "ctrlclk", .clk = "iss_ctrlclk" },
};
},
.opt_clks = iss_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(iss_opt_clks),
- .slaves = omap44xx_iss_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_iss_slaves),
- .masters = omap44xx_iss_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_iss_masters),
};
/*
};
static struct omap_hwmod_rst_info omap44xx_iva_resets[] = {
- { .name = "logic", .rst_shift = 2 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq0_resets[] = {
{ .name = "seq0", .rst_shift = 0 },
-};
-
-static struct omap_hwmod_rst_info omap44xx_iva_seq1_resets[] = {
{ .name = "seq1", .rst_shift = 1 },
-};
-
-/* iva master ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_masters[] = {
- &omap44xx_iva__l3_main_2,
- &omap44xx_iva__l3_instr,
-};
-
-static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
- {
- .pa_start = 0x5a000000,
- .pa_end = 0x5a07ffff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l3_main_2 -> iva */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
- .master = &omap44xx_l3_main_2_hwmod,
- .slave = &omap44xx_iva_hwmod,
- .clk = "l3_div_ck",
- .addr = omap44xx_iva_addrs,
- .user = OCP_USER_MPU,
-};
-
-/* iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = {
- &omap44xx_dsp__iva,
- &omap44xx_l3_main_2__iva,
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
- .name = "iva_seq0",
- .class = &omap44xx_iva_hwmod_class,
- .clkdm_name = "ivahd_clkdm",
- .flags = HWMOD_INIT_NO_RESET,
- .rst_lines = omap44xx_iva_seq0_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets),
- .prcm = {
- .omap4 = {
- .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
- },
- },
-};
-
-/* Pseudo hwmod for reset control purpose only */
-static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
- .name = "iva_seq1",
- .class = &omap44xx_iva_hwmod_class,
- .clkdm_name = "ivahd_clkdm",
- .flags = HWMOD_INIT_NO_RESET,
- .rst_lines = omap44xx_iva_seq1_resets,
- .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets),
- .prcm = {
- .omap4 = {
- .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET,
- },
- },
+ { .name = "logic", .rst_shift = 2 },
};
static struct omap_hwmod omap44xx_iva_hwmod = {
.modulemode = MODULEMODE_HWCTRL,
},
},
- .slaves = omap44xx_iva_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_iva_slaves),
- .masters = omap44xx_iva_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_iva_masters),
};
/*
};
/* kbd */
-static struct omap_hwmod omap44xx_kbd_hwmod;
static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = {
{ .irq = 120 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = {
- {
- .pa_start = 0x4a31c000,
- .pa_end = 0x4a31c07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_wkup -> kbd */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_kbd_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .addr = omap44xx_kbd_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* kbd slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = {
- &omap44xx_l4_wkup__kbd,
-};
-
static struct omap_hwmod omap44xx_kbd_hwmod = {
.name = "kbd",
.class = &omap44xx_kbd_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_kbd_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_kbd_slaves),
};
/*
};
/* mailbox */
-static struct omap_hwmod omap44xx_mailbox_hwmod;
static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = {
{ .irq = 26 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
- {
- .pa_start = 0x4a0f4000,
- .pa_end = 0x4a0f41ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> mailbox */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_mailbox_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mailbox_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mailbox slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = {
- &omap44xx_l4_cfg__mailbox,
-};
-
static struct omap_hwmod omap44xx_mailbox_hwmod = {
.name = "mailbox",
.class = &omap44xx_mailbox_hwmod_class,
.context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_mailbox_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mailbox_slaves),
};
/*
};
/* mcbsp1 */
-static struct omap_hwmod omap44xx_mcbsp1_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = {
{ .irq = 17 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x40122000,
- .pa_end = 0x401220ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp1_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp1_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
- {
- .name = "dma",
- .pa_start = 0x49022000,
- .pa_end = 0x490220ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp1 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp1_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp1_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* mcbsp1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = {
- &omap44xx_l4_abe__mcbsp1,
- &omap44xx_l4_abe__mcbsp1_dma,
-};
-
static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
{ .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" },
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mcbsp1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp1_slaves),
.opt_clks = mcbsp1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp1_opt_clks),
};
/* mcbsp2 */
-static struct omap_hwmod omap44xx_mcbsp2_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = {
{ .irq = 22 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x40124000,
- .pa_end = 0x401240ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp2_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp2_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
- {
- .name = "dma",
- .pa_start = 0x49024000,
- .pa_end = 0x490240ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp2 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp2_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp2_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* mcbsp2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = {
- &omap44xx_l4_abe__mcbsp2,
- &omap44xx_l4_abe__mcbsp2_dma,
-};
-
static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
{ .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" },
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mcbsp2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp2_slaves),
.opt_clks = mcbsp2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp2_opt_clks),
};
/* mcbsp3 */
-static struct omap_hwmod omap44xx_mcbsp3_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = {
{ .irq = 23 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
- {
- .name = "mpu",
- .pa_start = 0x40126000,
- .pa_end = 0x401260ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp3_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp3_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
- {
- .name = "dma",
- .pa_start = 0x49026000,
- .pa_end = 0x490260ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcbsp3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcbsp3_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcbsp3_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* mcbsp3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = {
- &omap44xx_l4_abe__mcbsp3,
- &omap44xx_l4_abe__mcbsp3_dma,
-};
-
static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
{ .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" },
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mcbsp3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp3_slaves),
.opt_clks = mcbsp3_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp3_opt_clks),
};
/* mcbsp4 */
-static struct omap_hwmod omap44xx_mcbsp4_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = {
{ .irq = 16 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = {
- {
- .pa_start = 0x48096000,
- .pa_end = 0x480960ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mcbsp4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mcbsp4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mcbsp4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcbsp4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = {
- &omap44xx_l4_per__mcbsp4,
-};
-
static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = {
{ .role = "pad_fck", .clk = "pad_clks_ck" },
{ .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" },
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mcbsp4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcbsp4_slaves),
.opt_clks = mcbsp4_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp4_opt_clks),
};
};
/* mcpdm */
-static struct omap_hwmod omap44xx_mcpdm_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = {
{ .irq = 112 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
- {
- .pa_start = 0x40132000,
- .pa_end = 0x4013207f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcpdm */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcpdm_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcpdm_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
- {
- .pa_start = 0x49032000,
- .pa_end = 0x4903207f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> mcpdm (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_mcpdm_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_mcpdm_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* mcpdm slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = {
- &omap44xx_l4_abe__mcpdm,
- &omap44xx_l4_abe__mcpdm_dma,
-};
-
static struct omap_hwmod omap44xx_mcpdm_hwmod = {
.name = "mcpdm",
.class = &omap44xx_mcpdm_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mcpdm_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcpdm_slaves),
};
/*
};
/* mcspi1 */
-static struct omap_hwmod omap44xx_mcspi1_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = {
{ .irq = 65 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = {
- {
- .pa_start = 0x48098000,
- .pa_end = 0x480981ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mcspi1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mcspi1_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mcspi1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi1_slaves[] = {
- &omap44xx_l4_per__mcspi1,
-};
-
/* mcspi1 dev_attr */
static struct omap2_mcspi_dev_attr mcspi1_dev_attr = {
.num_chipselect = 4,
},
},
.dev_attr = &mcspi1_dev_attr,
- .slaves = omap44xx_mcspi1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi1_slaves),
};
/* mcspi2 */
-static struct omap_hwmod omap44xx_mcspi2_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = {
{ .irq = 66 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = {
- {
- .pa_start = 0x4809a000,
- .pa_end = 0x4809a1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mcspi2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mcspi2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mcspi2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi2_slaves[] = {
- &omap44xx_l4_per__mcspi2,
-};
-
/* mcspi2 dev_attr */
static struct omap2_mcspi_dev_attr mcspi2_dev_attr = {
.num_chipselect = 2,
},
},
.dev_attr = &mcspi2_dev_attr,
- .slaves = omap44xx_mcspi2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi2_slaves),
};
/* mcspi3 */
-static struct omap_hwmod omap44xx_mcspi3_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = {
{ .irq = 91 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = {
- {
- .pa_start = 0x480b8000,
- .pa_end = 0x480b81ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mcspi3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mcspi3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mcspi3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi3_slaves[] = {
- &omap44xx_l4_per__mcspi3,
-};
-
-/* mcspi3 dev_attr */
-static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
- .num_chipselect = 2,
+/* mcspi3 dev_attr */
+static struct omap2_mcspi_dev_attr mcspi3_dev_attr = {
+ .num_chipselect = 2,
};
static struct omap_hwmod omap44xx_mcspi3_hwmod = {
},
},
.dev_attr = &mcspi3_dev_attr,
- .slaves = omap44xx_mcspi3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi3_slaves),
};
/* mcspi4 */
-static struct omap_hwmod omap44xx_mcspi4_hwmod;
static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = {
{ .irq = 48 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = {
- {
- .pa_start = 0x480ba000,
- .pa_end = 0x480ba1ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mcspi4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mcspi4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mcspi4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mcspi4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mcspi4_slaves[] = {
- &omap44xx_l4_per__mcspi4,
-};
-
/* mcspi4 dev_attr */
static struct omap2_mcspi_dev_attr mcspi4_dev_attr = {
.num_chipselect = 1,
},
},
.dev_attr = &mcspi4_dev_attr,
- .slaves = omap44xx_mcspi4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mcspi4_slaves),
};
/*
{ .dma_req = -1 }
};
-/* mmc1 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_masters[] = {
- &omap44xx_mmc1__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = {
- {
- .pa_start = 0x4809c000,
- .pa_end = 0x4809c3ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mmc1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mmc1_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mmc1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc1_slaves[] = {
- &omap44xx_l4_per__mmc1,
-};
-
/* mmc1 dev_attr */
static struct omap_mmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
},
},
.dev_attr = &mmc1_dev_attr,
- .slaves = omap44xx_mmc1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mmc1_slaves),
- .masters = omap44xx_mmc1_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_mmc1_masters),
};
/* mmc2 */
{ .dma_req = -1 }
};
-/* mmc2 master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_masters[] = {
- &omap44xx_mmc2__l3_main_1,
-};
-
-static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = {
- {
- .pa_start = 0x480b4000,
- .pa_end = 0x480b43ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mmc2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mmc2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mmc2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = {
- &omap44xx_l4_per__mmc2,
-};
-
static struct omap_hwmod omap44xx_mmc2_hwmod = {
.name = "mmc2",
.class = &omap44xx_mmc_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mmc2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mmc2_slaves),
- .masters = omap44xx_mmc2_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_mmc2_masters),
};
/* mmc3 */
-static struct omap_hwmod omap44xx_mmc3_hwmod;
static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = {
{ .irq = 94 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = {
- {
- .pa_start = 0x480ad000,
- .pa_end = 0x480ad3ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mmc3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mmc3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mmc3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = {
- &omap44xx_l4_per__mmc3,
-};
-
static struct omap_hwmod omap44xx_mmc3_hwmod = {
.name = "mmc3",
.class = &omap44xx_mmc_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mmc3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mmc3_slaves),
};
/* mmc4 */
-static struct omap_hwmod omap44xx_mmc4_hwmod;
static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = {
{ .irq = 96 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = {
- {
- .pa_start = 0x480d1000,
- .pa_end = 0x480d13ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mmc4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mmc4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mmc4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = {
- &omap44xx_l4_per__mmc4,
-};
-
static struct omap_hwmod omap44xx_mmc4_hwmod = {
.name = "mmc4",
.class = &omap44xx_mmc_hwmod_class,
.clkdm_name = "l4_per_clkdm",
.mpu_irqs = omap44xx_mmc4_irqs,
-
.sdma_reqs = omap44xx_mmc4_sdma_reqs,
.main_clk = "mmc4_fck",
.prcm = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mmc4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mmc4_slaves),
};
/* mmc5 */
-static struct omap_hwmod omap44xx_mmc5_hwmod;
static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = {
{ .irq = 59 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = {
- {
- .pa_start = 0x480d5000,
- .pa_end = 0x480d53ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> mmc5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_mmc5_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_mmc5_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* mmc5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = {
- &omap44xx_l4_per__mmc5,
-};
-
static struct omap_hwmod omap44xx_mmc5_hwmod = {
.name = "mmc5",
.class = &omap44xx_mmc_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_mmc5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_mmc5_slaves),
};
/*
{ .irq = -1 }
};
-/* mpu master ports */
-static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = {
- &omap44xx_mpu__l3_main_1,
- &omap44xx_mpu__l4_abe,
- &omap44xx_mpu__dmm,
-};
-
static struct omap_hwmod omap44xx_mpu_hwmod = {
.name = "mpu",
.class = &omap44xx_mpu_hwmod_class,
.context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET,
},
},
- .masters = omap44xx_mpu_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_mpu_masters),
};
/*
.sensor_voltdm_name = "core",
};
-static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
- {
- .pa_start = 0x4a0dd000,
- .pa_end = 0x4a0dd03f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> smartreflex_core */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_core_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_smartreflex_core_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_core slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
- &omap44xx_l4_cfg__smartreflex_core,
-};
-
static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
.name = "smartreflex_core",
.class = &omap44xx_smartreflex_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_smartreflex_core_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
.dev_attr = &smartreflex_core_dev_attr,
};
.sensor_voltdm_name = "iva",
};
-static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
- {
- .pa_start = 0x4a0db000,
- .pa_end = 0x4a0db03f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> smartreflex_iva */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_iva_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_smartreflex_iva_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_iva slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
- &omap44xx_l4_cfg__smartreflex_iva,
-};
-
static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
.name = "smartreflex_iva",
.class = &omap44xx_smartreflex_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_smartreflex_iva_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
.dev_attr = &smartreflex_iva_dev_attr,
};
.sensor_voltdm_name = "mpu",
};
-static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
- {
- .pa_start = 0x4a0d9000,
- .pa_end = 0x4a0d903f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> smartreflex_mpu */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_smartreflex_mpu_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_smartreflex_mpu_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* smartreflex_mpu slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
- &omap44xx_l4_cfg__smartreflex_mpu,
-};
-
static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
.name = "smartreflex_mpu",
.class = &omap44xx_smartreflex_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_smartreflex_mpu_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
.dev_attr = &smartreflex_mpu_dev_attr,
};
};
/* spinlock */
-static struct omap_hwmod omap44xx_spinlock_hwmod;
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
- {
- .pa_start = 0x4a0f6000,
- .pa_end = 0x4a0f6fff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> spinlock */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_spinlock_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_spinlock_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* spinlock slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = {
- &omap44xx_l4_cfg__spinlock,
-};
-
static struct omap_hwmod omap44xx_spinlock_hwmod = {
.name = "spinlock",
.class = &omap44xx_spinlock_hwmod_class,
.context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET,
},
},
- .slaves = omap44xx_spinlock_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_spinlock_slaves),
};
/*
};
/* timer1 */
-static struct omap_hwmod omap44xx_timer1_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = {
{ .irq = 37 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = {
- {
- .pa_start = 0x4a318000,
- .pa_end = 0x4a31807f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_wkup -> timer1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_timer1_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .addr = omap44xx_timer1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = {
- &omap44xx_l4_wkup__timer1,
-};
-
static struct omap_hwmod omap44xx_timer1_hwmod = {
.name = "timer1",
.class = &omap44xx_timer_1ms_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer1_slaves),
};
/* timer2 */
-static struct omap_hwmod omap44xx_timer2_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = {
{ .irq = 38 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = {
- {
- .pa_start = 0x48032000,
- .pa_end = 0x4803207f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = {
- &omap44xx_l4_per__timer2,
-};
-
static struct omap_hwmod omap44xx_timer2_hwmod = {
.name = "timer2",
.class = &omap44xx_timer_1ms_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer2_slaves),
};
/* timer3 */
-static struct omap_hwmod omap44xx_timer3_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = {
{ .irq = 39 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = {
- {
- .pa_start = 0x48034000,
- .pa_end = 0x4803407f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = {
- &omap44xx_l4_per__timer3,
-};
-
static struct omap_hwmod omap44xx_timer3_hwmod = {
.name = "timer3",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer3_slaves),
};
/* timer4 */
-static struct omap_hwmod omap44xx_timer4_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = {
{ .irq = 40 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = {
- {
- .pa_start = 0x48036000,
- .pa_end = 0x4803607f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = {
- &omap44xx_l4_per__timer4,
-};
-
static struct omap_hwmod omap44xx_timer4_hwmod = {
.name = "timer4",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer4_slaves),
};
/* timer5 */
-static struct omap_hwmod omap44xx_timer5_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = {
{ .irq = 41 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = {
- {
- .pa_start = 0x40138000,
- .pa_end = 0x4013807f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer5 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer5_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer5_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = {
- {
- .pa_start = 0x49038000,
- .pa_end = 0x4903807f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer5 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer5_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer5_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* timer5 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = {
- &omap44xx_l4_abe__timer5,
- &omap44xx_l4_abe__timer5_dma,
-};
-
static struct omap_hwmod omap44xx_timer5_hwmod = {
.name = "timer5",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer5_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer5_slaves),
};
/* timer6 */
-static struct omap_hwmod omap44xx_timer6_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = {
{ .irq = 42 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = {
- {
- .pa_start = 0x4013a000,
- .pa_end = 0x4013a07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer6 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer6_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer6_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = {
- {
- .pa_start = 0x4903a000,
- .pa_end = 0x4903a07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer6 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer6_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer6_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* timer6 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = {
- &omap44xx_l4_abe__timer6,
- &omap44xx_l4_abe__timer6_dma,
-};
-
static struct omap_hwmod omap44xx_timer6_hwmod = {
.name = "timer6",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer6_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer6_slaves),
};
/* timer7 */
-static struct omap_hwmod omap44xx_timer7_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = {
{ .irq = 43 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = {
- {
- .pa_start = 0x4013c000,
- .pa_end = 0x4013c07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer7 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer7_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer7_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = {
- {
- .pa_start = 0x4903c000,
- .pa_end = 0x4903c07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer7 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer7_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer7_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* timer7 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = {
- &omap44xx_l4_abe__timer7,
- &omap44xx_l4_abe__timer7_dma,
-};
-
static struct omap_hwmod omap44xx_timer7_hwmod = {
.name = "timer7",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_alwon_dev_attr,
- .slaves = omap44xx_timer7_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer7_slaves),
};
/* timer8 */
-static struct omap_hwmod omap44xx_timer8_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = {
{ .irq = 44 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = {
- {
- .pa_start = 0x4013e000,
- .pa_end = 0x4013e07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer8 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer8_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer8_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = {
- {
- .pa_start = 0x4903e000,
- .pa_end = 0x4903e07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> timer8 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_timer8_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_timer8_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* timer8 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = {
- &omap44xx_l4_abe__timer8,
- &omap44xx_l4_abe__timer8_dma,
-};
-
static struct omap_hwmod omap44xx_timer8_hwmod = {
.name = "timer8",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_pwm_dev_attr,
- .slaves = omap44xx_timer8_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer8_slaves),
};
/* timer9 */
-static struct omap_hwmod omap44xx_timer9_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = {
{ .irq = 45 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = {
- {
- .pa_start = 0x4803e000,
- .pa_end = 0x4803e07f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer9 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer9_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer9_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer9 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = {
- &omap44xx_l4_per__timer9,
-};
-
static struct omap_hwmod omap44xx_timer9_hwmod = {
.name = "timer9",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_pwm_dev_attr,
- .slaves = omap44xx_timer9_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer9_slaves),
};
/* timer10 */
-static struct omap_hwmod omap44xx_timer10_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = {
{ .irq = 46 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = {
- {
- .pa_start = 0x48086000,
- .pa_end = 0x4808607f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer10 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer10_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer10_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer10 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = {
- &omap44xx_l4_per__timer10,
-};
-
-static struct omap_hwmod omap44xx_timer10_hwmod = {
- .name = "timer10",
- .class = &omap44xx_timer_1ms_hwmod_class,
- .clkdm_name = "l4_per_clkdm",
- .mpu_irqs = omap44xx_timer10_irqs,
- .main_clk = "timer10_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
+static struct omap_hwmod omap44xx_timer10_hwmod = {
+ .name = "timer10",
+ .class = &omap44xx_timer_1ms_hwmod_class,
+ .clkdm_name = "l4_per_clkdm",
+ .mpu_irqs = omap44xx_timer10_irqs,
+ .main_clk = "timer10_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
},
.dev_attr = &capability_pwm_dev_attr,
- .slaves = omap44xx_timer10_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer10_slaves),
};
/* timer11 */
-static struct omap_hwmod omap44xx_timer11_hwmod;
static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = {
{ .irq = 47 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = {
- {
- .pa_start = 0x48088000,
- .pa_end = 0x4808807f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> timer11 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_timer11_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_timer11_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* timer11 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = {
- &omap44xx_l4_per__timer11,
-};
-
static struct omap_hwmod omap44xx_timer11_hwmod = {
.name = "timer11",
.class = &omap44xx_timer_hwmod_class,
},
},
.dev_attr = &capability_pwm_dev_attr,
- .slaves = omap44xx_timer11_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_timer11_slaves),
};
/*
};
/* uart1 */
-static struct omap_hwmod omap44xx_uart1_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
- {
- .pa_start = 0x4806a000,
- .pa_end = 0x4806a0ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> uart1 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_uart1_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_uart1_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart1 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
- &omap44xx_l4_per__uart1,
-};
-
static struct omap_hwmod omap44xx_uart1_hwmod = {
.name = "uart1",
.class = &omap44xx_uart_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_uart1_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_uart1_slaves),
};
/* uart2 */
-static struct omap_hwmod omap44xx_uart2_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
- {
- .pa_start = 0x4806c000,
- .pa_end = 0x4806c0ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> uart2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_uart2_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_uart2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
- &omap44xx_l4_per__uart2,
-};
-
static struct omap_hwmod omap44xx_uart2_hwmod = {
.name = "uart2",
.class = &omap44xx_uart_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_uart2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_uart2_slaves),
};
/* uart3 */
-static struct omap_hwmod omap44xx_uart3_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
- {
- .pa_start = 0x48020000,
- .pa_end = 0x480200ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> uart3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_uart3_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_uart3_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
- &omap44xx_l4_per__uart3,
-};
-
static struct omap_hwmod omap44xx_uart3_hwmod = {
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_uart3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_uart3_slaves),
};
/* uart4 */
-static struct omap_hwmod omap44xx_uart4_hwmod;
static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
{ .dma_req = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
- {
- .pa_start = 0x4806e000,
- .pa_end = 0x4806e0ff,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_per -> uart4 */
-static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
- .master = &omap44xx_l4_per_hwmod,
- .slave = &omap44xx_uart4_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_uart4_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* uart4 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
- &omap44xx_l4_per__uart4,
-};
-
static struct omap_hwmod omap44xx_uart4_hwmod = {
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_uart4_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_uart4_slaves),
+};
+
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+/* usb_host_hs */
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+ { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap44xx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_host_hs_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_host_hs_irqs,
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
};
/*
{ .irq = -1 }
};
-/* usb_otg_hs master ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_masters[] = {
- &omap44xx_usb_otg_hs__l3_main_2,
-};
-
-static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
- {
- .pa_start = 0x4a0ab000,
- .pa_end = 0x4a0ab003,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_cfg -> usb_otg_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = {
- .master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_usb_otg_hs_hwmod,
- .clk = "l4_div_ck",
- .addr = omap44xx_usb_otg_hs_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_otg_hs slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_usb_otg_hs_slaves[] = {
- &omap44xx_l4_cfg__usb_otg_hs,
-};
-
static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = {
{ .role = "xclk", .clk = "usb_otg_hs_xclk" },
};
},
.opt_clks = usb_otg_hs_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks),
- .slaves = omap44xx_usb_otg_hs_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves),
- .masters = omap44xx_usb_otg_hs_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_masters),
};
/*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
*/
-static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
-static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
- .name = "wd_timer",
- .sysc = &omap44xx_wd_timer_sysc,
- .pre_shutdown = &omap2_wd_timer_disable,
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap44xx_usb_tll_hs_sysc,
};
-/* wd_timer2 */
-static struct omap_hwmod omap44xx_wd_timer2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
- { .irq = 80 + OMAP44XX_IRQ_GIC_START },
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
- {
- .pa_start = 0x4a314000,
- .pa_end = 0x4a31407f,
- .flags = ADDR_TYPE_RT
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap44xx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap44xx_usb_tll_hs_irqs,
+ .main_clk = "usb_tll_hs_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
},
- { }
};
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
- .master = &omap44xx_l4_wkup_hwmod,
- .slave = &omap44xx_wd_timer2_hwmod,
- .clk = "l4_wkup_clk_mux_ck",
- .addr = omap44xx_wd_timer2_addrs,
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type1,
};
-/* wd_timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
- &omap44xx_l4_wkup__wd_timer2,
+static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
+ .name = "wd_timer",
+ .sysc = &omap44xx_wd_timer_sysc,
+ .pre_shutdown = &omap2_wd_timer_disable,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
+ { .irq = 80 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
};
static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_wd_timer2_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer2_slaves),
};
/* wd_timer3 */
-static struct omap_hwmod omap44xx_wd_timer3_hwmod;
static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
- {
- .pa_start = 0x40130000,
- .pa_end = 0x4013007f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> wd_timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_wd_timer3_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_wd_timer3_addrs,
- .user = OCP_USER_MPU,
-};
-
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
- {
- .pa_start = 0x49030000,
- .pa_end = 0x4903007f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
-/* l4_abe -> wd_timer3 (dma) */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
- .master = &omap44xx_l4_abe_hwmod,
- .slave = &omap44xx_wd_timer3_hwmod,
- .clk = "ocp_abe_iclk",
- .addr = omap44xx_wd_timer3_dma_addrs,
- .user = OCP_USER_SDMA,
-};
-
-/* wd_timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
- &omap44xx_l4_abe__wd_timer3,
- &omap44xx_l4_abe__wd_timer3_dma,
-};
-
static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.name = "wd_timer3",
.class = &omap44xx_wd_timer_hwmod_class,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .slaves = omap44xx_wd_timer3_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
};
+
/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
+ * interfaces
*/
-static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
- .master = &omap44xx_usb_host_hs_hwmod,
- .slave = &omap44xx_l3_main_2_hwmod,
+
+/* l3_main_1 -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_dmm_hwmod,
.clk = "l3_div_ck",
- .user = OCP_USER_MPU | OCP_USER_SDMA,
+ .user = OCP_USER_SDMA,
};
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_SOFTRESET),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
- MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
- .sysc_fields = &omap_hwmod_sysc_type2,
+static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
+ {
+ .pa_start = 0x4e000000,
+ .pa_end = 0x4e0007ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
- .name = "usb_host_hs",
- .sysc = &omap44xx_usb_host_hs_sysc,
+/* mpu -> dmm */
+static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_dmm_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_dmm_addrs,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
- &omap44xx_usb_host_hs__l3_main_2,
+/* dmm -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
+ .master = &omap44xx_dmm_hwmod,
+ .slave = &omap44xx_emif_fw_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
{
- .name = "uhh",
- .pa_start = 0x4a064000,
- .pa_end = 0x4a0647ff,
+ .pa_start = 0x4a20c000,
+ .pa_end = 0x4a20c0ff,
.flags = ADDR_TYPE_RT
},
- {
- .name = "ohci",
- .pa_start = 0x4a064800,
- .pa_end = 0x4a064bff,
- },
- {
- .name = "ehci",
- .pa_start = 0x4a064c00,
- .pa_end = 0x4a064fff,
- },
- {}
+ { }
};
-static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
- { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
- { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
- { .irq = -1 }
+/* l4_cfg -> emif_fw */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_emif_fw_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_emif_fw_addrs,
+ .user = OCP_USER_MPU,
};
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+/* iva -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
+ .master = &omap44xx_iva_hwmod,
+ .slave = &omap44xx_l3_instr_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_3 -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
+ .master = &omap44xx_l3_main_3_hwmod,
+ .slave = &omap44xx_l3_instr_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dsp -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
+ .master = &omap44xx_dsp_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dss -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = {
+ .master = &omap44xx_dss_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = {
.master = &omap44xx_l4_cfg_hwmod,
- .slave = &omap44xx_usb_host_hs_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
.clk = "l4_div_ck",
- .addr = omap44xx_usb_host_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
- &omap44xx_l4_cfg__usb_host_hs,
+/* mmc1 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mmc1__l3_main_1 = {
+ .master = &omap44xx_mmc1_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
- .name = "usb_host_hs",
- .class = &omap44xx_usb_host_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .main_clk = "usb_host_hs_fck",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_SWCTRL,
- },
- },
- .mpu_irqs = omap44xx_usb_host_hs_irqs,
- .slaves = omap44xx_usb_host_hs_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
- .masters = omap44xx_usb_host_hs_masters,
- .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+/* mmc2 -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = {
+ .master = &omap44xx_mmc2_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
- /*
- * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
- * id: i660
- *
- * Description:
- * In the following configuration :
- * - USBHOST module is set to smart-idle mode
- * - PRCM asserts idle_req to the USBHOST module ( This typically
- * happens when the system is going to a low power mode : all ports
- * have been suspended, the master part of the USBHOST module has
- * entered the standby state, and SW has cut the functional clocks)
- * - an USBHOST interrupt occurs before the module is able to answer
- * idle_ack, typically a remote wakeup IRQ.
- * Then the USB HOST module will enter a deadlock situation where it
- * is no more accessible nor functional.
- *
- * Workaround:
- * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
- */
+static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = {
+ {
+ .pa_start = 0x44000000,
+ .pa_end = 0x44000fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* mpu -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_l3_main_1_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_l3_main_1_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* dma_system -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
+ .master = &omap44xx_dma_system_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* hsi -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_hsi__l3_main_2 = {
+ .master = &omap44xx_hsi_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* ipu -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = {
+ .master = &omap44xx_ipu_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iss -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = {
+ .master = &omap44xx_iss_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iva -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
+ .master = &omap44xx_iva_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = {
+ {
+ .pa_start = 0x44800000,
+ .pa_end = 0x44801fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_1 -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_l3_main_2_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l4_cfg -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* usb_host_hs -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+ .master = &omap44xx_usb_host_hs_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* usb_otg_hs -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_usb_otg_hs__l3_main_2 = {
+ .master = &omap44xx_usb_otg_hs_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = {
+ {
+ .pa_start = 0x45000000,
+ .pa_end = 0x45000fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_1 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_l3_main_3_addrs,
+ .user = OCP_USER_MPU,
+};
+
+/* l3_main_2 -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l3_main_3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l3_main_3_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* aess -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = {
+ .master = &omap44xx_aess_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "ocp_abe_iclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dsp -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
+ .master = &omap44xx_dsp_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "ocp_abe_iclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_l4_abe_hwmod,
+ .clk = "ocp_abe_iclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> l4_cfg */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = {
+ .master = &omap44xx_l3_main_1_hwmod,
+ .slave = &omap44xx_l4_cfg_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> l4_per */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_l4_per_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> l4_wkup */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_l4_wkup_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* mpu -> mpu_private */
+static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = {
+ .master = &omap44xx_mpu_hwmod,
+ .slave = &omap44xx_mpu_private_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = {
+ {
+ .pa_start = 0x401f1000,
+ .pa_end = 0x401f13ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> aess */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_aess_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_aess_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = {
+ {
+ .pa_start = 0x490f1000,
+ .pa_end = 0x490f13ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> aess (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_aess_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_aess_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = {
+ {
+ .pa_start = 0x4a304000,
+ .pa_end = 0x4a30401f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_wkup -> counter_32k */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = {
+ .master = &omap44xx_l4_wkup_hwmod,
+ .slave = &omap44xx_counter_32k_hwmod,
+ .clk = "l4_wkup_clk_mux_ck",
+ .addr = omap44xx_counter_32k_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
+ {
+ .pa_start = 0x4a056000,
+ .pa_end = 0x4a056fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_dma_system_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dma_system_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x4012e000,
+ .pa_end = 0x4012e07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> dmic */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_dmic_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_dmic_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
+ {
+ .name = "dma",
+ .pa_start = 0x4902e000,
+ .pa_end = 0x4902e07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> dmic (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_dmic_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_dmic_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+/* dsp -> iva */
+static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
+ .master = &omap44xx_dsp_hwmod,
+ .slave = &omap44xx_iva_hwmod,
+ .clk = "dpll_iva_m5x2_ck",
+ .user = OCP_USER_DSP,
+};
+
+/* l4_cfg -> dsp */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_dsp_hwmod,
+ .clk = "l4_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = {
+ {
+ .pa_start = 0x58000000,
+ .pa_end = 0x5800007f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = {
+ {
+ .pa_start = 0x48040000,
+ .pa_end = 0x4804007f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = {
+ {
+ .pa_start = 0x58001000,
+ .pa_end = 0x58001fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_dispc */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_dispc_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_dispc_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = {
+ {
+ .pa_start = 0x48041000,
+ .pa_end = 0x48041fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_dispc */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_dispc_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_dispc_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = {
+ {
+ .pa_start = 0x58004000,
+ .pa_end = 0x580041ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_dsi1_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_dsi1_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = {
+ {
+ .pa_start = 0x48044000,
+ .pa_end = 0x480441ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_dsi1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_dsi1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_dsi1_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = {
+ {
+ .pa_start = 0x58005000,
+ .pa_end = 0x580051ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_dsi2 */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_dsi2_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_dsi2_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = {
+ {
+ .pa_start = 0x48045000,
+ .pa_end = 0x480451ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_dsi2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_dsi2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_dsi2_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = {
+ {
+ .pa_start = 0x58006000,
+ .pa_end = 0x58006fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_hdmi_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_hdmi_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = {
+ {
+ .pa_start = 0x48046000,
+ .pa_end = 0x48046fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_hdmi */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_hdmi_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_hdmi_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = {
+ {
+ .pa_start = 0x58002000,
+ .pa_end = 0x580020ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_rfbi_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_rfbi_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = {
+ {
+ .pa_start = 0x48042000,
+ .pa_end = 0x480420ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_rfbi */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_rfbi_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_rfbi_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = {
+ {
+ .pa_start = 0x58003000,
+ .pa_end = 0x580030ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> dss_venc */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_dss_venc_hwmod,
+ .clk = "dss_fck",
+ .addr = omap44xx_dss_venc_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = {
+ {
+ .pa_start = 0x48043000,
+ .pa_end = 0x480430ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> dss_venc */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_dss_venc_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_dss_venc_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
+ {
+ .pa_start = 0x4a310000,
+ .pa_end = 0x4a3101ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
+ .master = &omap44xx_l4_wkup_hwmod,
+ .slave = &omap44xx_gpio1_hwmod,
+ .clk = "l4_wkup_clk_mux_ck",
+ .addr = omap44xx_gpio1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
+ {
+ .pa_start = 0x48055000,
+ .pa_end = 0x480551ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_gpio2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_gpio2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
+ {
+ .pa_start = 0x48057000,
+ .pa_end = 0x480571ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_gpio3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_gpio3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
+ {
+ .pa_start = 0x48059000,
+ .pa_end = 0x480591ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_gpio4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_gpio4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
+ {
+ .pa_start = 0x4805b000,
+ .pa_end = 0x4805b1ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_gpio5_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_gpio5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
+ {
+ .pa_start = 0x4805d000,
+ .pa_end = 0x4805d1ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_gpio6_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_gpio6_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = {
+ {
+ .pa_start = 0x4a058000,
+ .pa_end = 0x4a05bfff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> hsi */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_hsi_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_hsi_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
+ {
+ .pa_start = 0x48070000,
+ .pa_end = 0x480700ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> i2c1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
+ {
+ .pa_start = 0x48072000,
+ .pa_end = 0x480720ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> i2c2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
+ {
+ .pa_start = 0x48060000,
+ .pa_end = 0x480600ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> i2c3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
+ {
+ .pa_start = 0x48350000,
+ .pa_end = 0x483500ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> i2c4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_i2c4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_i2c4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_2 -> ipu */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_ipu_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = {
+ {
+ .pa_start = 0x52000000,
+ .pa_end = 0x520000ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> iss */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_iss_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_iss_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
+ {
+ .pa_start = 0x5a000000,
+ .pa_end = 0x5a07ffff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l3_main_2 -> iva */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
+ .master = &omap44xx_l3_main_2_hwmod,
+ .slave = &omap44xx_iva_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_iva_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = {
+ {
+ .pa_start = 0x4a31c000,
+ .pa_end = 0x4a31c07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_wkup -> kbd */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = {
+ .master = &omap44xx_l4_wkup_hwmod,
+ .slave = &omap44xx_kbd_hwmod,
+ .clk = "l4_wkup_clk_mux_ck",
+ .addr = omap44xx_kbd_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = {
+ {
+ .pa_start = 0x4a0f4000,
+ .pa_end = 0x4a0f41ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> mailbox */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_mailbox_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mailbox_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x40122000,
+ .pa_end = 0x401220ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp1_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp1_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
+ {
+ .name = "dma",
+ .pa_start = 0x49022000,
+ .pa_end = 0x490220ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp1 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp1_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp1_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x40124000,
+ .pa_end = 0x401240ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp2_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp2_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
+ {
+ .name = "dma",
+ .pa_start = 0x49024000,
+ .pa_end = 0x490240ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp2 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp2_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp2_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
+ {
+ .name = "mpu",
+ .pa_start = 0x40126000,
+ .pa_end = 0x401260ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp3_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp3_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
+ {
+ .name = "dma",
+ .pa_start = 0x49026000,
+ .pa_end = 0x490260ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcbsp3 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcbsp3_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcbsp3_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = {
+ {
+ .pa_start = 0x48096000,
+ .pa_end = 0x480960ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mcbsp4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mcbsp4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mcbsp4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
+ {
+ .pa_start = 0x40132000,
+ .pa_end = 0x4013207f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcpdm */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcpdm_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcpdm_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
+ {
+ .pa_start = 0x49032000,
+ .pa_end = 0x4903207f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> mcpdm (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_mcpdm_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_mcpdm_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = {
+ {
+ .pa_start = 0x48098000,
+ .pa_end = 0x480981ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mcspi1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mcspi1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mcspi1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = {
+ {
+ .pa_start = 0x4809a000,
+ .pa_end = 0x4809a1ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mcspi2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mcspi2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mcspi2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = {
+ {
+ .pa_start = 0x480b8000,
+ .pa_end = 0x480b81ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mcspi3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mcspi3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mcspi3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = {
+ {
+ .pa_start = 0x480ba000,
+ .pa_end = 0x480ba1ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mcspi4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mcspi4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mcspi4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = {
+ {
+ .pa_start = 0x4809c000,
+ .pa_end = 0x4809c3ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mmc1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mmc1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmc1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = {
+ {
+ .pa_start = 0x480b4000,
+ .pa_end = 0x480b43ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mmc2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mmc2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmc2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = {
+ {
+ .pa_start = 0x480ad000,
+ .pa_end = 0x480ad3ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mmc3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mmc3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmc3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = {
+ {
+ .pa_start = 0x480d1000,
+ .pa_end = 0x480d13ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mmc4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mmc4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmc4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = {
+ {
+ .pa_start = 0x480d5000,
+ .pa_end = 0x480d53ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> mmc5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_mmc5_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_mmc5_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
+ {
+ .pa_start = 0x4a0dd000,
+ .pa_end = 0x4a0dd03f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_smartreflex_core_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_smartreflex_core_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
+ {
+ .pa_start = 0x4a0db000,
+ .pa_end = 0x4a0db03f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> smartreflex_iva */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_smartreflex_iva_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_smartreflex_iva_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
+ {
+ .pa_start = 0x4a0d9000,
+ .pa_end = 0x4a0d903f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_smartreflex_mpu_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_smartreflex_mpu_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
+ {
+ .pa_start = 0x4a0f6000,
+ .pa_end = 0x4a0f6fff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_cfg -> spinlock */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_spinlock_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_spinlock_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = {
+ {
+ .pa_start = 0x4a318000,
+ .pa_end = 0x4a31807f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_wkup -> timer1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = {
+ .master = &omap44xx_l4_wkup_hwmod,
+ .slave = &omap44xx_timer1_hwmod,
+ .clk = "l4_wkup_clk_mux_ck",
+ .addr = omap44xx_timer1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = {
+ {
+ .pa_start = 0x48032000,
+ .pa_end = 0x4803207f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = {
+ {
+ .pa_start = 0x48034000,
+ .pa_end = 0x4803407f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = {
+ {
+ .pa_start = 0x48036000,
+ .pa_end = 0x4803607f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = {
+ {
+ .pa_start = 0x40138000,
+ .pa_end = 0x4013807f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer5_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer5_addrs,
+ .user = OCP_USER_MPU,
+};
- /*
- * Errata: USB host EHCI may stall when entering smart-standby mode
- * Id: i571
- *
- * Description:
- * When the USBHOST module is set to smart-standby mode, and when it is
- * ready to enter the standby state (i.e. all ports are suspended and
- * all attached devices are in suspend mode), then it can wrongly assert
- * the Mstandby signal too early while there are still some residual OCP
- * transactions ongoing. If this condition occurs, the internal state
- * machine may go to an undefined state and the USB link may be stuck
- * upon the next resume.
- *
- * Workaround:
- * Don't use smart standby; use only force standby,
- * hence HWMOD_SWSUP_MSTANDBY
- */
+static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = {
+ {
+ .pa_start = 0x49038000,
+ .pa_end = 0x4903807f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer5 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer5_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer5_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = {
+ {
+ .pa_start = 0x4013a000,
+ .pa_end = 0x4013a07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer6_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer6_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = {
+ {
+ .pa_start = 0x4903a000,
+ .pa_end = 0x4903a07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer6 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer6_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer6_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = {
+ {
+ .pa_start = 0x4013c000,
+ .pa_end = 0x4013c07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer7 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer7_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer7_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = {
+ {
+ .pa_start = 0x4903c000,
+ .pa_end = 0x4903c07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer7 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer7_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer7_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = {
+ {
+ .pa_start = 0x4013e000,
+ .pa_end = 0x4013e07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer8 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer8_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer8_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = {
+ {
+ .pa_start = 0x4903e000,
+ .pa_end = 0x4903e07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> timer8 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_timer8_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_timer8_dma_addrs,
+ .user = OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = {
+ {
+ .pa_start = 0x4803e000,
+ .pa_end = 0x4803e07f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer9 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer9_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer9_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = {
+ {
+ .pa_start = 0x48086000,
+ .pa_end = 0x4808607f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer10 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer10_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer10_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = {
+ {
+ .pa_start = 0x48088000,
+ .pa_end = 0x4808807f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> timer11 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_timer11_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_timer11_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
+ {
+ .pa_start = 0x4806a000,
+ .pa_end = 0x4806a0ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> uart1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_uart1_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_uart1_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
+ {
+ .pa_start = 0x4806c000,
+ .pa_end = 0x4806c0ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> uart2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_uart2_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_uart2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
+ {
+ .pa_start = 0x48020000,
+ .pa_end = 0x480200ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_per -> uart3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_uart3_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_uart3_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
+ {
+ .pa_start = 0x4806e000,
+ .pa_end = 0x4806e0ff,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
- /*
- * During system boot; If the hwmod framework resets the module
- * the module will have smart idle settings; which can lead to deadlock
- * (above Errata Id:i660); so, dont reset the module during boot;
- * Use HWMOD_INIT_NO_RESET.
- */
+/* l4_per -> uart4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
+ .master = &omap44xx_l4_per_hwmod,
+ .slave = &omap44xx_uart4_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_uart4_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
- .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
- HWMOD_INIT_NO_RESET,
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x4a064000,
+ .pa_end = 0x4a0647ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x4a064800,
+ .pa_end = 0x4a064bff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x4a064c00,
+ .pa_end = 0x4a064fff,
+ },
+ {}
};
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
- .rev_offs = 0x0000,
- .sysc_offs = 0x0010,
- .syss_offs = 0x0014,
- .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
- SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
- SYSC_HAS_AUTOIDLE),
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
- .sysc_fields = &omap_hwmod_sysc_type1,
+/* l4_cfg -> usb_host_hs */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_host_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
- .name = "usb_tll_hs",
- .sysc = &omap44xx_usb_tll_hs_sysc,
+static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = {
+ {
+ .pa_start = 0x4a0ab000,
+ .pa_end = 0x4a0ab003,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
- { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
- { .irq = -1 }
+/* l4_cfg -> usb_otg_hs */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_otg_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_otg_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
{}
};
+/* l4_cfg -> usb_tll_hs */
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_tll_hs_hwmod,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
- &omap44xx_l4_cfg__usb_tll_hs,
+static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
+ {
+ .pa_start = 0x4a314000,
+ .pa_end = 0x4a31407f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
};
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
- .name = "usb_tll_hs",
- .class = &omap44xx_usb_tll_hs_hwmod_class,
- .clkdm_name = "l3_init_clkdm",
- .main_clk = "usb_tll_hs_ick",
- .prcm = {
- .omap4 = {
- .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
- .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
- .modulemode = MODULEMODE_HWCTRL,
- },
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
+ .master = &omap44xx_l4_wkup_hwmod,
+ .slave = &omap44xx_wd_timer2_hwmod,
+ .clk = "l4_wkup_clk_mux_ck",
+ .addr = omap44xx_wd_timer2_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
+ {
+ .pa_start = 0x40130000,
+ .pa_end = 0x4013007f,
+ .flags = ADDR_TYPE_RT
},
- .mpu_irqs = omap44xx_usb_tll_hs_irqs,
- .slaves = omap44xx_usb_tll_hs_slaves,
- .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+ { }
+};
+
+/* l4_abe -> wd_timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_wd_timer3_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_wd_timer3_addrs,
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
+ {
+ .pa_start = 0x49030000,
+ .pa_end = 0x4903007f,
+ .flags = ADDR_TYPE_RT
+ },
+ { }
+};
+
+/* l4_abe -> wd_timer3 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
+ .master = &omap44xx_l4_abe_hwmod,
+ .slave = &omap44xx_wd_timer3_hwmod,
+ .clk = "ocp_abe_iclk",
+ .addr = omap44xx_wd_timer3_dma_addrs,
+ .user = OCP_USER_SDMA,
};
-static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
-
- /* dmm class */
- &omap44xx_dmm_hwmod,
-
- /* emif_fw class */
- &omap44xx_emif_fw_hwmod,
-
- /* l3 class */
- &omap44xx_l3_instr_hwmod,
- &omap44xx_l3_main_1_hwmod,
- &omap44xx_l3_main_2_hwmod,
- &omap44xx_l3_main_3_hwmod,
-
- /* l4 class */
- &omap44xx_l4_abe_hwmod,
- &omap44xx_l4_cfg_hwmod,
- &omap44xx_l4_per_hwmod,
- &omap44xx_l4_wkup_hwmod,
-
- /* mpu_bus class */
- &omap44xx_mpu_private_hwmod,
-
- /* aess class */
-/* &omap44xx_aess_hwmod, */
-
- /* bandgap class */
- &omap44xx_bandgap_hwmod,
-
- /* counter class */
-/* &omap44xx_counter_32k_hwmod, */
-
- /* dma class */
- &omap44xx_dma_system_hwmod,
-
- /* dmic class */
- &omap44xx_dmic_hwmod,
-
- /* dsp class */
- &omap44xx_dsp_hwmod,
- &omap44xx_dsp_c0_hwmod,
-
- /* dss class */
- &omap44xx_dss_hwmod,
- &omap44xx_dss_dispc_hwmod,
- &omap44xx_dss_dsi1_hwmod,
- &omap44xx_dss_dsi2_hwmod,
- &omap44xx_dss_hdmi_hwmod,
- &omap44xx_dss_rfbi_hwmod,
- &omap44xx_dss_venc_hwmod,
-
- /* gpio class */
- &omap44xx_gpio1_hwmod,
- &omap44xx_gpio2_hwmod,
- &omap44xx_gpio3_hwmod,
- &omap44xx_gpio4_hwmod,
- &omap44xx_gpio5_hwmod,
- &omap44xx_gpio6_hwmod,
-
- /* hsi class */
-/* &omap44xx_hsi_hwmod, */
-
- /* i2c class */
- &omap44xx_i2c1_hwmod,
- &omap44xx_i2c2_hwmod,
- &omap44xx_i2c3_hwmod,
- &omap44xx_i2c4_hwmod,
-
- /* ipu class */
- &omap44xx_ipu_hwmod,
- &omap44xx_ipu_c0_hwmod,
- &omap44xx_ipu_c1_hwmod,
-
- /* iss class */
-/* &omap44xx_iss_hwmod, */
-
- /* iva class */
- &omap44xx_iva_hwmod,
- &omap44xx_iva_seq0_hwmod,
- &omap44xx_iva_seq1_hwmod,
-
- /* kbd class */
- &omap44xx_kbd_hwmod,
-
- /* mailbox class */
- &omap44xx_mailbox_hwmod,
-
- /* mcbsp class */
- &omap44xx_mcbsp1_hwmod,
- &omap44xx_mcbsp2_hwmod,
- &omap44xx_mcbsp3_hwmod,
- &omap44xx_mcbsp4_hwmod,
-
- /* mcpdm class */
- &omap44xx_mcpdm_hwmod,
-
- /* mcspi class */
- &omap44xx_mcspi1_hwmod,
- &omap44xx_mcspi2_hwmod,
- &omap44xx_mcspi3_hwmod,
- &omap44xx_mcspi4_hwmod,
-
- /* mmc class */
- &omap44xx_mmc1_hwmod,
- &omap44xx_mmc2_hwmod,
- &omap44xx_mmc3_hwmod,
- &omap44xx_mmc4_hwmod,
- &omap44xx_mmc5_hwmod,
-
- /* mpu class */
- &omap44xx_mpu_hwmod,
-
- /* smartreflex class */
- &omap44xx_smartreflex_core_hwmod,
- &omap44xx_smartreflex_iva_hwmod,
- &omap44xx_smartreflex_mpu_hwmod,
-
- /* spinlock class */
- &omap44xx_spinlock_hwmod,
-
- /* timer class */
- &omap44xx_timer1_hwmod,
- &omap44xx_timer2_hwmod,
- &omap44xx_timer3_hwmod,
- &omap44xx_timer4_hwmod,
- &omap44xx_timer5_hwmod,
- &omap44xx_timer6_hwmod,
- &omap44xx_timer7_hwmod,
- &omap44xx_timer8_hwmod,
- &omap44xx_timer9_hwmod,
- &omap44xx_timer10_hwmod,
- &omap44xx_timer11_hwmod,
-
- /* uart class */
- &omap44xx_uart1_hwmod,
- &omap44xx_uart2_hwmod,
- &omap44xx_uart3_hwmod,
- &omap44xx_uart4_hwmod,
-
- /* usb host class */
- &omap44xx_usb_host_hs_hwmod,
- &omap44xx_usb_tll_hs_hwmod,
-
- /* usb_otg_hs class */
- &omap44xx_usb_otg_hs_hwmod,
-
- /* wd_timer class */
- &omap44xx_wd_timer2_hwmod,
- &omap44xx_wd_timer3_hwmod,
+static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
+ &omap44xx_l3_main_1__dmm,
+ &omap44xx_mpu__dmm,
+ &omap44xx_dmm__emif_fw,
+ &omap44xx_l4_cfg__emif_fw,
+ &omap44xx_iva__l3_instr,
+ &omap44xx_l3_main_3__l3_instr,
+ &omap44xx_dsp__l3_main_1,
+ &omap44xx_dss__l3_main_1,
+ &omap44xx_l3_main_2__l3_main_1,
+ &omap44xx_l4_cfg__l3_main_1,
+ &omap44xx_mmc1__l3_main_1,
+ &omap44xx_mmc2__l3_main_1,
+ &omap44xx_mpu__l3_main_1,
+ &omap44xx_dma_system__l3_main_2,
+ &omap44xx_hsi__l3_main_2,
+ &omap44xx_ipu__l3_main_2,
+ &omap44xx_iss__l3_main_2,
+ &omap44xx_iva__l3_main_2,
+ &omap44xx_l3_main_1__l3_main_2,
+ &omap44xx_l4_cfg__l3_main_2,
+ &omap44xx_usb_host_hs__l3_main_2,
+ &omap44xx_usb_otg_hs__l3_main_2,
+ &omap44xx_l3_main_1__l3_main_3,
+ &omap44xx_l3_main_2__l3_main_3,
+ &omap44xx_l4_cfg__l3_main_3,
+ &omap44xx_aess__l4_abe,
+ &omap44xx_dsp__l4_abe,
+ &omap44xx_l3_main_1__l4_abe,
+ &omap44xx_mpu__l4_abe,
+ &omap44xx_l3_main_1__l4_cfg,
+ &omap44xx_l3_main_2__l4_per,
+ &omap44xx_l4_cfg__l4_wkup,
+ &omap44xx_mpu__mpu_private,
+ &omap44xx_l4_abe__aess,
+ &omap44xx_l4_abe__aess_dma,
+ &omap44xx_l4_wkup__counter_32k,
+ &omap44xx_l4_cfg__dma_system,
+ &omap44xx_l4_abe__dmic,
+ &omap44xx_l4_abe__dmic_dma,
+ &omap44xx_dsp__iva,
+ &omap44xx_l4_cfg__dsp,
+ &omap44xx_l3_main_2__dss,
+ &omap44xx_l4_per__dss,
+ &omap44xx_l3_main_2__dss_dispc,
+ &omap44xx_l4_per__dss_dispc,
+ &omap44xx_l3_main_2__dss_dsi1,
+ &omap44xx_l4_per__dss_dsi1,
+ &omap44xx_l3_main_2__dss_dsi2,
+ &omap44xx_l4_per__dss_dsi2,
+ &omap44xx_l3_main_2__dss_hdmi,
+ &omap44xx_l4_per__dss_hdmi,
+ &omap44xx_l3_main_2__dss_rfbi,
+ &omap44xx_l4_per__dss_rfbi,
+ &omap44xx_l3_main_2__dss_venc,
+ &omap44xx_l4_per__dss_venc,
+ &omap44xx_l4_wkup__gpio1,
+ &omap44xx_l4_per__gpio2,
+ &omap44xx_l4_per__gpio3,
+ &omap44xx_l4_per__gpio4,
+ &omap44xx_l4_per__gpio5,
+ &omap44xx_l4_per__gpio6,
+ &omap44xx_l4_cfg__hsi,
+ &omap44xx_l4_per__i2c1,
+ &omap44xx_l4_per__i2c2,
+ &omap44xx_l4_per__i2c3,
+ &omap44xx_l4_per__i2c4,
+ &omap44xx_l3_main_2__ipu,
+ &omap44xx_l3_main_2__iss,
+ &omap44xx_l3_main_2__iva,
+ &omap44xx_l4_wkup__kbd,
+ &omap44xx_l4_cfg__mailbox,
+ &omap44xx_l4_abe__mcbsp1,
+ &omap44xx_l4_abe__mcbsp1_dma,
+ &omap44xx_l4_abe__mcbsp2,
+ &omap44xx_l4_abe__mcbsp2_dma,
+ &omap44xx_l4_abe__mcbsp3,
+ &omap44xx_l4_abe__mcbsp3_dma,
+ &omap44xx_l4_per__mcbsp4,
+ &omap44xx_l4_abe__mcpdm,
+ &omap44xx_l4_abe__mcpdm_dma,
+ &omap44xx_l4_per__mcspi1,
+ &omap44xx_l4_per__mcspi2,
+ &omap44xx_l4_per__mcspi3,
+ &omap44xx_l4_per__mcspi4,
+ &omap44xx_l4_per__mmc1,
+ &omap44xx_l4_per__mmc2,
+ &omap44xx_l4_per__mmc3,
+ &omap44xx_l4_per__mmc4,
+ &omap44xx_l4_per__mmc5,
+ &omap44xx_l4_cfg__smartreflex_core,
+ &omap44xx_l4_cfg__smartreflex_iva,
+ &omap44xx_l4_cfg__smartreflex_mpu,
+ &omap44xx_l4_cfg__spinlock,
+ &omap44xx_l4_wkup__timer1,
+ &omap44xx_l4_per__timer2,
+ &omap44xx_l4_per__timer3,
+ &omap44xx_l4_per__timer4,
+ &omap44xx_l4_abe__timer5,
+ &omap44xx_l4_abe__timer5_dma,
+ &omap44xx_l4_abe__timer6,
+ &omap44xx_l4_abe__timer6_dma,
+ &omap44xx_l4_abe__timer7,
+ &omap44xx_l4_abe__timer7_dma,
+ &omap44xx_l4_abe__timer8,
+ &omap44xx_l4_abe__timer8_dma,
+ &omap44xx_l4_per__timer9,
+ &omap44xx_l4_per__timer10,
+ &omap44xx_l4_per__timer11,
+ &omap44xx_l4_per__uart1,
+ &omap44xx_l4_per__uart2,
+ &omap44xx_l4_per__uart3,
+ &omap44xx_l4_per__uart4,
+ &omap44xx_l4_cfg__usb_host_hs,
+ &omap44xx_l4_cfg__usb_otg_hs,
+ &omap44xx_l4_cfg__usb_tll_hs,
+ &omap44xx_l4_wkup__wd_timer2,
+ &omap44xx_l4_abe__wd_timer3,
+ &omap44xx_l4_abe__wd_timer3_dma,
NULL,
};
int __init omap44xx_hwmod_init(void)
{
- return omap_hwmod_register(omap44xx_hwmods);
+ return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs);
}
#include "display.h"
/* Common address space across OMAP2xxx */
-extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[];
-extern struct omap_hwmod_addr_space omap2xxx_timer2_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer3_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer4_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer5_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer6_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer7_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer8_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer9_addrs[];
-extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[];
/* Common address space across OMAP2xxx/3xxx */
/* Common IP block data across OMAP2xxx */
extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[];
extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[];
+extern struct omap_gpio_dev_attr omap2xxx_gpio_dev_attr;
+extern struct omap_hwmod omap2xxx_l3_main_hwmod;
+extern struct omap_hwmod omap2xxx_l4_core_hwmod;
+extern struct omap_hwmod omap2xxx_l4_wkup_hwmod;
+extern struct omap_hwmod omap2xxx_mpu_hwmod;
+extern struct omap_hwmod omap2xxx_iva_hwmod;
+extern struct omap_hwmod omap2xxx_timer1_hwmod;
+extern struct omap_hwmod omap2xxx_timer2_hwmod;
+extern struct omap_hwmod omap2xxx_timer3_hwmod;
+extern struct omap_hwmod omap2xxx_timer4_hwmod;
+extern struct omap_hwmod omap2xxx_timer5_hwmod;
+extern struct omap_hwmod omap2xxx_timer6_hwmod;
+extern struct omap_hwmod omap2xxx_timer7_hwmod;
+extern struct omap_hwmod omap2xxx_timer8_hwmod;
+extern struct omap_hwmod omap2xxx_timer9_hwmod;
+extern struct omap_hwmod omap2xxx_timer10_hwmod;
+extern struct omap_hwmod omap2xxx_timer11_hwmod;
+extern struct omap_hwmod omap2xxx_timer12_hwmod;
+extern struct omap_hwmod omap2xxx_wd_timer2_hwmod;
+extern struct omap_hwmod omap2xxx_uart1_hwmod;
+extern struct omap_hwmod omap2xxx_uart2_hwmod;
+extern struct omap_hwmod omap2xxx_uart3_hwmod;
+extern struct omap_hwmod omap2xxx_dss_core_hwmod;
+extern struct omap_hwmod omap2xxx_dss_dispc_hwmod;
+extern struct omap_hwmod omap2xxx_dss_rfbi_hwmod;
+extern struct omap_hwmod omap2xxx_dss_venc_hwmod;
+extern struct omap_hwmod omap2xxx_gpio1_hwmod;
+extern struct omap_hwmod omap2xxx_gpio2_hwmod;
+extern struct omap_hwmod omap2xxx_gpio3_hwmod;
+extern struct omap_hwmod omap2xxx_gpio4_hwmod;
+extern struct omap_hwmod omap2xxx_mcspi1_hwmod;
+extern struct omap_hwmod omap2xxx_mcspi2_hwmod;
+
+/* Common interface data across OMAP2xxx */
+extern struct omap_hwmod_ocp_if omap2xxx_l3_main__l4_core;
+extern struct omap_hwmod_ocp_if omap2xxx_mpu__l3_main;
+extern struct omap_hwmod_ocp_if omap2xxx_dss__l3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__l4_wkup;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart1;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart2;
+extern struct omap_hwmod_ocp_if omap2_l4_core__uart3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi1;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__mcspi2;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer2;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer3;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer4;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer5;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer6;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer7;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer8;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer9;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer10;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer11;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__timer12;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_dispc;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_rfbi;
+extern struct omap_hwmod_ocp_if omap2xxx_l4_core__dss_venc;
/* Common IP block data */
extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[];
extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];
+extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[];
/* OMAP hwmod classes - forward declarations */
extern struct omap_hwmod_class l3_hwmod_class;
static void omap2_enter_mpu_retention(void)
{
- int only_idle = 0;
-
/* Putting MPU into the WFI state while a transfer is active
* seems to cause the I2C block to timeout. Why? Good question. */
if (omap2_i2c_active())
omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
OMAP2_PM_PWSTCTRL);
- only_idle = 1;
}
omap2_sram_idle();
int per_next_state = PWRDM_POWER_ON;
int core_next_state = PWRDM_POWER_ON;
int per_going_off;
- int core_prev_state, per_prev_state;
+ int core_prev_state;
u32 sdrc_pwr = 0;
mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
pwrdm_post_transition();
/* PER */
- if (per_next_state < PWRDM_POWER_ON) {
- per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+ if (per_next_state < PWRDM_POWER_ON)
omap2_gpio_resume_after_idle();
- }
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
static int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *per_clkdm, *mpu_clkdm, *core_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm;
int ret;
if (!cpu_is_omap34xx())
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
- per_clkdm = clkdm_lookup("per_clkdm");
- core_clkdm = clkdm_lookup("core_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
*/
int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
{
- int nr_regs = irq_setup->nr_regs;
+ int nr_regs;
u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG];
int offset, i;
struct irq_chip_generic *gc;
if (!irq_setup)
return -EINVAL;
+ nr_regs = irq_setup->nr_regs;
+
if (prcm_irq_setup) {
pr_err("PRCM: already initialized; won't reinitialize\n");
return -EINVAL;
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
#endif
-char *cmdline_find_option(char *str)
+static char *cmdline_find_option(char *str)
{
extern char *saved_command_line;
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
struct omap_hwmod *oh;
+ struct resource irq_rsrc, mem_rsrc;
size_t size;
int res = 0;
+ int r;
sprintf(name, "timer%d", gptimer_id);
omap_hwmod_setup_one(name);
if (!oh)
return -ENODEV;
- timer->irq = oh->mpu_irqs[0].irq;
- timer->phys_base = oh->slaves[0]->addr->pa_start;
- size = oh->slaves[0]->addr->pa_end - timer->phys_base;
+ r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq_rsrc);
+ if (r)
+ return -ENXIO;
+ timer->irq = irq_rsrc.start;
+
+ r = omap_hwmod_get_resource_byname(oh, IORESOURCE_MEM, NULL, &mem_rsrc);
+ if (r)
+ return -ENXIO;
+ timer->phys_base = mem_rsrc.start;
+ size = mem_rsrc.end - mem_rsrc.start;
/* Static mapping, never released */
timer->io_base = ioremap(timer->phys_base, size);
tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
if (tmp > 4)
return -ERANGE;
- if (tmp <= 0)
+ if (tmp == 0)
tmp = 1;
t.page_burst_access = (fclk_ps * tmp) / 1000;
select ARM_ERRATA_764369
select CACHE_L2X0
-config UX500_SOC_DB5500
- bool
- select MFD_DB5500_PRCMU
-
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
help
Include support for the snowball development platform.
-config MACH_U5500
- bool "U5500 Development platform"
- select UX500_SOC_DB5500
- help
- Include support for the U5500 development platform.
-
config UX500_AUTO_PLATFORM
def_bool y
- depends on !MACH_U5500
select MACH_MOP500
help
At least one platform needs to be selected in order to build
Choose the UART on which kernel low-level debug messages should be
output.
-config U5500_MODEM_IRQ
- bool "Modem IRQ support"
- depends on UX500_SOC_DB5500
- default y
- help
- Add support for handling IRQ:s from modem side
-
-config U5500_MBOX
- bool "Mailbox support"
- depends on U5500_MODEM_IRQ
- default y
- help
- Add support for U5500 mailbox communication with modem side
-
endif
obj-y := clock.o cpu.o devices.o devices-common.o \
id.o usb.o timer.o
obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
-obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o \
board-mop500-pins.o
-obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
-obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
-
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/amba/mmci.h>
-#include <linux/mmc/host.h>
-
-#include <plat/pincfg.h>
-#include <plat/gpio-nomadik.h>
-#include <mach/db5500-regs.h>
-#include <plat/ste_dma40.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static pin_cfg_t u5500_sdi_pins[] = {
- /* SDI0 (POP eMMC) */
- GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP,
- GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW,
-};
-
-#ifdef CONFIG_STE_DMA40
-struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_PERIPH_TO_MEM,
- .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-
-static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
- .mode = STEDMA40_MODE_LOGICAL,
- .dir = STEDMA40_MEM_TO_PERIPH,
- .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
- .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
-};
-#endif
-
-static struct mmci_platform_data u5500_sdi0_data = {
- .ocr_mask = MMC_VDD_165_195,
- .f_max = 50000000,
- .capabilities = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED,
- .gpio_cd = -1,
- .gpio_wp = -1,
-#ifdef CONFIG_STE_DMA40
- .dma_filter = stedma40_filter,
- .dma_rx_param = &u5500_sdi0_dma_cfg_rx,
- .dma_tx_param = &u5500_sdi0_dma_cfg_tx,
-#endif
-};
-
-void __init u5500_sdi_init(struct device *parent)
-{
- nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
-
- db5500_add_sdi0(parent, &u5500_sdi0_data);
-}
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/mfd/abx500/ab5500.h>
-
-#include <asm/hardware/gic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/pincfg.h>
-#include <plat/i2c.h>
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-
-#include "pins-db5500.h"
-#include "devices-db5500.h"
-#include <linux/led-lm3530.h>
-
-/*
- * GPIO
- */
-
-static pin_cfg_t u5500_pins[] = {
- /* I2C */
- GPIO218_I2C2_SCL | PIN_INPUT_PULLUP,
- GPIO219_I2C2_SDA | PIN_INPUT_PULLUP,
-
- /* DISPLAY_ENABLE */
- GPIO226_GPIO | PIN_OUTPUT_LOW,
-
- /* Backlight Enbale */
- GPIO224_GPIO | PIN_OUTPUT_HIGH,
-};
-/*
- * I2C
- */
-
-#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
-static struct nmk_i2c_controller u5500_i2c##id##_data = { \
- /* \
- * slave data setup time, which is \
- * 250 ns,100ns,10ns which is 14,6,2 \
- * respectively for a 48 Mhz \
- * i2c clock \
- */ \
- .slsu = _slsu, \
- /* Tx FIFO threshold */ \
- .tft = _tft, \
- /* Rx FIFO threshold */ \
- .rft = _rft, \
- /* std. mode operation */ \
- .clk_freq = clk, \
- .sm = _sm, \
-}
-/*
- * The board uses TODO <3> i2c controllers, initialize all of
- * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
- * mode of operation
- */
-
-U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
-
-static struct lm3530_platform_data u5500_als_platform_data = {
- .mode = LM3530_BL_MODE_MANUAL,
- .als_input_mode = LM3530_INPUT_ALS1,
- .max_current = LM3530_FS_CURR_26mA,
- .pwm_pol_hi = true,
- .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
- .brt_ramp_law = 1, /* Linear */
- .brt_ramp_fall = LM3530_RAMP_TIME_8s,
- .brt_ramp_rise = LM3530_RAMP_TIME_8s,
- .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
- .als2_resistor_sel = LM3530_ALS_IMPD_Z,
- .als_vmin = 730, /* mV */
- .als_vmax = 1020, /* mV */
- .brt_val = 0x7F, /* Max brightness */
-};
-
-static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
- {
- /* Backlight */
- I2C_BOARD_INFO("lm3530-led", 0x36),
- .platform_data = &u5500_als_platform_data,
- },
-};
-
-static void __init u5500_i2c_init(struct device *parent)
-{
- db5500_add_i2c2(parent, &u5500_i2c2_data);
- i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
-}
-
-static struct ab5500_platform_data ab5500_plf_data = {
- .irq = {
- .base = 0,
- .count = 0,
- },
- .init_settings = NULL,
- .init_settings_sz = 0,
- .pm_power_off = false,
-};
-
-static struct platform_device ab5500_device = {
- .name = "ab5500-core",
- .id = 0,
- .dev = {
- .platform_data = &ab5500_plf_data,
- },
- .num_resources = 0,
-};
-
-static struct platform_device *u5500_platform_devices[] __initdata = {
- &ab5500_device,
-};
-
-static void __init u5500_uart_init(struct device *parent)
-{
- db5500_add_uart0(parent, NULL);
- db5500_add_uart1(parent, NULL);
- db5500_add_uart2(parent, NULL);
-}
-
-static void __init u5500_init_machine(void)
-{
- struct device *parent = NULL;
- int i;
-
- parent = u5500_init_devices();
- nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
-
- u5500_i2c_init(parent);
- u5500_sdi_init(parent);
- u5500_uart_init(parent);
-
- for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
- u5500_platform_devices[i]->dev.parent = parent;
-
- platform_add_devices(u5500_platform_devices,
- ARRAY_SIZE(u5500_platform_devices));
-}
-
-MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
- .atag_offset = 0x100,
- .map_io = u5500_map_io,
- .init_irq = ux500_init_irq,
- .timer = &ux500_timer,
- .handle_irq = gic_handle_irq,
- .init_machine = u5500_init_machine,
-MACHINE_END
static int __init ux500_l2x0_init(void)
{
- if (cpu_is_u5500())
- l2x0_base = __io_address(U5500_L2CC_BASE);
- else if (cpu_is_u8500())
+ if (cpu_is_u8500())
l2x0_base = __io_address(U8500_L2CC_BASE);
else
ux500_unknown_soc();
unsigned long mturate;
unsigned long retclk;
- if (cpu_is_u5500())
- addr = __io_address(U5500_PRCMU_BASE);
- else if (cpu_is_u8500())
+ if (cpu_is_u8500())
addr = __io_address(U8500_PRCMU_BASE);
else
ux500_unknown_soc();
int __init clk_init(void)
{
- if (cpu_is_u5500()) {
- /* Clock tree for U5500 not implemented yet */
- clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
- clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
- clk_uartclk.rate = 36360000;
- clk_sdmmcclk.rate = 99900000;
- }
-
clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
clkdev_add(&clk_smp_twd_lookup);
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mach/map.h>
-#include <asm/pmu.h>
-
-#include <plat/gpio-nomadik.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-#include <mach/setup.h>
-#include <mach/irqs.h>
-#include <mach/usb.h>
-
-#include "devices-db5500.h"
-#include "ste-dma40-db5500.h"
-
-static struct map_desc u5500_uart_io_desc[] __initdata = {
- __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
-};
-
-static struct map_desc u5500_io_desc[] __initdata = {
- /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
- __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
-
- __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
- __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
-};
-
-static struct resource mbox0_resources[] = {
- {
- .name = "mbox_peer",
- .start = U5500_MBOX0_PEER_START,
- .end = U5500_MBOX0_PEER_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_local",
- .start = U5500_MBOX0_LOCAL_START,
- .end = U5500_MBOX0_LOCAL_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_irq",
- .start = MBOX_PAIR0_VIRT_IRQ,
- .end = MBOX_PAIR0_VIRT_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource mbox1_resources[] = {
- {
- .name = "mbox_peer",
- .start = U5500_MBOX1_PEER_START,
- .end = U5500_MBOX1_PEER_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_local",
- .start = U5500_MBOX1_LOCAL_START,
- .end = U5500_MBOX1_LOCAL_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_irq",
- .start = MBOX_PAIR1_VIRT_IRQ,
- .end = MBOX_PAIR1_VIRT_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource mbox2_resources[] = {
- {
- .name = "mbox_peer",
- .start = U5500_MBOX2_PEER_START,
- .end = U5500_MBOX2_PEER_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_local",
- .start = U5500_MBOX2_LOCAL_START,
- .end = U5500_MBOX2_LOCAL_END,
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "mbox_irq",
- .start = MBOX_PAIR2_VIRT_IRQ,
- .end = MBOX_PAIR2_VIRT_IRQ,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device mbox0_device = {
- .id = 0,
- .name = "mbox",
- .resource = mbox0_resources,
- .num_resources = ARRAY_SIZE(mbox0_resources),
-};
-
-static struct platform_device mbox1_device = {
- .id = 1,
- .name = "mbox",
- .resource = mbox1_resources,
- .num_resources = ARRAY_SIZE(mbox1_resources),
-};
-
-static struct platform_device mbox2_device = {
- .id = 2,
- .name = "mbox",
- .resource = mbox2_resources,
- .num_resources = ARRAY_SIZE(mbox2_resources),
-};
-
-static struct platform_device *db5500_platform_devs[] __initdata = {
- &mbox0_device,
- &mbox1_device,
- &mbox2_device,
-};
-
-static resource_size_t __initdata db5500_gpio_base[] = {
- U5500_GPIOBANK0_BASE,
- U5500_GPIOBANK1_BASE,
- U5500_GPIOBANK2_BASE,
- U5500_GPIOBANK3_BASE,
- U5500_GPIOBANK4_BASE,
- U5500_GPIOBANK5_BASE,
- U5500_GPIOBANK6_BASE,
- U5500_GPIOBANK7_BASE,
-};
-
-static void __init db5500_add_gpios(struct device *parent)
-{
- struct nmk_gpio_platform_data pdata = {
- /* No custom data yet */
- };
-
- dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
- IRQ_DB5500_GPIO0, &pdata);
-}
-
-void __init u5500_map_io(void)
-{
- /*
- * Map the UARTs early so that the DEBUG_LL stuff continues to work.
- */
- iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
-
- ux500_map_io();
-
- iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
-
- _PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
-}
-
-static void __init db5500_pmu_init(void)
-{
- struct resource res[] = {
- [0] = {
- .start = IRQ_DB5500_PMU0,
- .end = IRQ_DB5500_PMU0,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = IRQ_DB5500_PMU1,
- .end = IRQ_DB5500_PMU1,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
- res, ARRAY_SIZE(res));
-}
-
-static int usb_db5500_rx_dma_cfg[] = {
- DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
- DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
- DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
- DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
- DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
- DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
- DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
- DB5500_DMA_DEV38_USB_OTG_IEP_8
-};
-
-static int usb_db5500_tx_dma_cfg[] = {
- DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
- DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
- DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
- DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
- DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
- DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
- DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
- DB5500_DMA_DEV38_USB_OTG_OEP_8
-};
-
-static const char *db5500_read_soc_id(void)
-{
- return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
-}
-
-static struct device * __init db5500_soc_device_init(void)
-{
- const char *soc_id = db5500_read_soc_id();
-
- return ux500_soc_device_init(soc_id);
-}
-
-struct device * __init u5500_init_devices(void)
-{
- struct device *parent;
- int i;
-
- parent = db5500_soc_device_init();
-
- db5500_add_gpios(parent);
- db5500_pmu_init();
- db5500_dma_init(parent);
- db5500_add_rtc(parent);
- db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
-
- for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
- db5500_platform_devs[i]->dev.parent = parent;
-
- platform_add_devices(db5500_platform_devs,
- ARRAY_SIZE(db5500_platform_devs));
-
- return parent;
-}
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
#include <linux/sys_soc.h>
#include <linux/err.h>
void __iomem *dist_base;
void __iomem *cpu_base;
- if (cpu_is_u5500()) {
- dist_base = __io_address(U5500_GIC_DIST_BASE);
- cpu_base = __io_address(U5500_GIC_CPU_BASE);
- } else if (cpu_is_u8500()) {
+ if (cpu_is_u8500()) {
dist_base = __io_address(U8500_GIC_DIST_BASE);
cpu_base = __io_address(U8500_GIC_CPU_BASE);
} else
* Init clocks here so that they are available for system timer
* initialization.
*/
- if (cpu_is_u5500())
- db5500_prcmu_early_init();
if (cpu_is_u8500())
db8500_prcmu_early_init();
clk_init();
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_DB5500_H
-#define __DEVICES_DB5500_H
-
-#include "devices-common.h"
-
-#define db5500_add_i2c1(parent, pdata) \
- dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(parent, pdata) \
- dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(parent, pdata) \
- dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
- IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
- IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
- IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_msp0_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
- IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
- IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(parent, pdata) \
- dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
- IRQ_DB5500_MSP2, pdata)
-
-#define db5500_add_rtc(parent) \
- dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-
-#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
- ux500_add_usb(parent, U5500_USBOTG_BASE, \
- IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-
-#define db5500_add_sdi0(parent, pdata) \
- dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
- IRQ_DB5500_SDMMC0, pdata, \
- 0x10480180)
-#define db5500_add_sdi1(parent, pdata) \
- dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
- IRQ_DB5500_SDMMC1, pdata, \
- 0x10480180)
-#define db5500_add_sdi2(parent, pdata) \
- dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
- IRQ_DB5500_SDMMC2, pdata \
- 0x10480180)
-#define db5500_add_sdi3(parent, pdata) \
- dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
- IRQ_DB5500_SDMMC3, pdata \
- 0x10480180)
-#define db5500_add_sdi4(parent, pdata) \
- dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
- IRQ_DB5500_SDMMC4, pdata \
- 0x10480180)
-
-/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(parent, pdata) \
- dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
- IRQ_DB5500_SPI0, pdata, \
- 0x10080023)
-#define db5500_add_spi1(parent, pdata) \
- dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
- IRQ_DB5500_SPI1, pdata, \
- 0x10080023)
-#define db5500_add_spi2(parent, pdata) \
- dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
- IRQ_DB5500_SPI2, pdata \
- 0x10080023)
-#define db5500_add_spi3(parent, pdata) \
- dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
- IRQ_DB5500_SPI3, pdata \
- 0x10080023)
-
-#define db5500_add_uart0(parent, plat) \
- dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
- IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(parent, plat) \
- dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
- IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(parent, plat) \
- dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
- IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(parent, plat) \
- dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
- IRQ_DB5500_UART3, plat)
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <plat/ste_dma40.h>
-#include <mach/setup.h>
-#include <mach/hardware.h>
-
-#include "ste-dma40-db5500.h"
-
-static struct resource dma40_resources[] = {
- [0] = {
- .start = U5500_DMA_BASE,
- .end = U5500_DMA_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- .name = "base",
- },
- [1] = {
- .start = U5500_DMA_LCPA_BASE,
- .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- .name = "lcpa",
- },
- [2] = {
- .start = IRQ_DB5500_DMA,
- .end = IRQ_DB5500_DMA,
- .flags = IORESOURCE_IRQ
- }
-};
-
-/* Default configuration for physical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
- .mode = STEDMA40_MODE_PHYSICAL,
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_PHY_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_PHY_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/* Default configuration for logical memcpy */
-static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
- .dir = STEDMA40_MEM_TO_MEM,
-
- .src_info.data_width = STEDMA40_BYTE_WIDTH,
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-
- .dst_info.data_width = STEDMA40_BYTE_WIDTH,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
-};
-
-/*
- * Mapping between soruce event lines and physical device address This was
- * created assuming that the event line is tied to a device and therefore the
- * address is constant, however this is not true for at least USB, and the
- * values are just placeholders for USB. This table is preserved and used for
- * now.
- */
-static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
- [DB5500_DMA_DEV24_SDMMC0_RX] = -1,
- [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
- [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
- [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
- [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
- [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
- [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
- [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
- [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
-};
-
-/* Mapping between destination event lines and physical device address */
-static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
- [DB5500_DMA_DEV24_SDMMC0_TX] = -1,
- [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
- [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
- [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
- [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
- [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
- [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
- [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
- [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
-};
-
-static int dma40_memcpy_event[] = {
- DB5500_DMA_MEMCPY_TX_1,
- DB5500_DMA_MEMCPY_TX_2,
- DB5500_DMA_MEMCPY_TX_3,
- DB5500_DMA_MEMCPY_TX_4,
- DB5500_DMA_MEMCPY_TX_5,
-};
-
-static struct stedma40_platform_data dma40_plat_data = {
- .dev_len = ARRAY_SIZE(dma40_rx_map),
- .dev_rx = dma40_rx_map,
- .dev_tx = dma40_tx_map,
- .memcpy = dma40_memcpy_event,
- .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
- .memcpy_conf_phy = &dma40_memcpy_conf_phy,
- .memcpy_conf_log = &dma40_memcpy_conf_log,
- .disabled_channels = {-1},
-};
-
-static struct platform_device dma40_device = {
- .dev = {
- .platform_data = &dma40_plat_data,
- },
- .name = "dma40",
- .id = 0,
- .num_resources = ARRAY_SIZE(dma40_resources),
- .resource = dma40_resources
-};
-
-void __init db5500_dma_init(struct device *parent)
-{
- int ret;
-
- dma40_device.dev.parent = parent;
- ret = platform_device_register(&dma40_device);
- if (ret)
- dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
-
-}
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB5500_REGS_H
-#define __MACH_DB5500_REGS_H
-
-#define U5500_PER1_BASE 0xA0020000
-#define U5500_PER2_BASE 0xA0010000
-#define U5500_PER3_BASE 0x80140000
-#define U5500_PER4_BASE 0x80150000
-#define U5500_PER5_BASE 0x80100000
-#define U5500_PER6_BASE 0x80120000
-
-#define U5500_GIC_DIST_BASE 0xA0411000
-#define U5500_GIC_CPU_BASE 0xA0410100
-#define U5500_DMA_BASE 0x90030000
-#define U5500_STM_BASE 0x90020000
-#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000)
-#define U5500_MCDE_BASE 0xA0400000
-#define U5500_MODEM_BASE 0xB0000000
-#define U5500_L2CC_BASE 0xA0412000
-#define U5500_SCU_BASE 0xA0410000
-#define U5500_DSI1_BASE 0xA0401000
-#define U5500_DSI2_BASE 0xA0402000
-#define U5500_SIA_BASE 0xA0100000
-#define U5500_SVA_BASE 0x80200000
-#define U5500_HSEM_BASE 0xA0000000
-#define U5500_NAND0_BASE 0x60000000
-#define U5500_NAND1_BASE 0x70000000
-#define U5500_TWD_BASE 0xa0410600
-#define U5500_ICN_BASE 0xA0040000
-#define U5500_B2R2_BASE 0xa0200000
-#define U5500_BOOT_ROM_BASE 0x90000000
-
-#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
-#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
-#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000)
-#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000)
-#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000)
-#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000)
-#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000)
-#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000)
-
-#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000)
-#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000)
-#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000)
-
-#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000)
-#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000)
-#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000)
-#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000)
-
-#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000)
-#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000)
-#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000)
-#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000)
-#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000)
-#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
-#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
-#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
-#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
-#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
-#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
-#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
-#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000)
-#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
-#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
-#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000)
-#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000)
-
-#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
-#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
-#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000)
-#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000)
-#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000)
-#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000)
-#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000)
-#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000)
-#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000)
-#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000)
-#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000)
-#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000)
-#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000)
-#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000)
-#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000)
-#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000)
-#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000)
-
-#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000)
-#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
-#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
-#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100)
-#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
-#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
-#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
-#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000)
-#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000)
-#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000)
-
-#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE
-#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80)
-#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE
-#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE
-#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE
-#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE
-#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80)
-#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100)
-
-#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000)
-#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40)
-#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F)
-#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60)
-#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F)
-#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80)
-#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F)
-#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0)
-#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF)
-#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00)
-#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F)
-#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
-#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)
-
-#define U5500_ACCCON_BASE_SEC (0xBFFF0000)
-#define U5500_ACCCON_BASE (0xBFFF1000)
-#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
-#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
-#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4)
-
-#define U5500_ESRAM_BASE 0x40000000
-#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
-#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
-
-#define U5500_MCDE_SIZE 0x1000
-#define U5500_DSI_LINK_SIZE 0x1000
-#define U5500_DSI_LINK_COUNT 0x2
-#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE)
-#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
-
-#endif
* built, so that there's some hint during the build that something is wrong.
*/
-#ifdef CONFIG_UX500_SOC_DB5500
-#define __UX500_UART(n) U5500_UART##n##_BASE
-#endif
-
#ifdef CONFIG_UX500_SOC_DB8500
#define __UX500_UART(n) U8500_UART##n##_BASE
#endif
struct platform_device;
struct amba_device;
-extern struct platform_device u5500_gpio_devs[];
extern struct platform_device u8500_gpio_devs[];
extern struct amba_device ux500_pl031_device;
#define io_p2v(n) __io_address(n)
#include <mach/db8500-regs.h>
-#include <mach/db5500-regs.h>
#define MSP_TX_RX_REG_OFFSET 0
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_U5500_H
-#define __MACH_IRQS_BOARD_U5500_H
-
-#define AB5500_NR_IRQS 5
-#define IRQ_AB5500_BASE IRQ_BOARD_START
-#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS)
-
-#define U5500_IRQ_END IRQ_AB5500_END
-
-#if IRQ_BOARD_END < U5500_IRQ_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END U5500_IRQ_END
-#endif
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB5500_H
-#define __MACH_IRQS_DB5500_H
-
-#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4)
-#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6)
-#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7)
-#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8)
-#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9)
-#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10)
-#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11)
-#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12)
-#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13)
-#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14)
-#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15)
-#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16)
-#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17)
-#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18)
-#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19)
-#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20)
-#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21)
-#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22)
-#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23)
-#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24)
-#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25)
-#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26)
-#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27)
-#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28)
-#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29)
-#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30)
-#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31)
-#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33)
-#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34)
-#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35)
-#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36)
-#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37)
-#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38)
-#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39)
-#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40)
-#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41)
-#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42)
-#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43)
-#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44)
-#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45)
-#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46)
-#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47)
-#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48)
-#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50)
-#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52)
-#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53)
-#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55)
-#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56)
-#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57)
-#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59)
-#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60)
-#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61)
-#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63)
-#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65)
-#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96)
-#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98)
-#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101)
-#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108)
-#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109)
-#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110)
-#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112)
-#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113)
-#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114)
-#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115)
-#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116)
-#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118)
-#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119)
-#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120)
-#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121)
-#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122)
-#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123)
-#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124)
-#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125)
-#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126)
-
-#ifdef CONFIG_UX500_SOC_DB5500
-
-/*
- * After the GPIO ones we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START
-#define IRQ_MODEM_EVENTS_NBR 72
-#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END IRQ_MODEM_EVENTS_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-#endif
/* This will be overridden by SoC-specific irq headers */
#define IRQ_SOC_END IRQ_SOC_START
-#include <mach/irqs-db5500.h>
#include <mach/irqs-db8500.h>
#define IRQ_BOARD_START IRQ_SOC_END
#include <mach/irqs-board-mop500.h>
#endif
-#ifdef CONFIG_MACH_U5500
-#include <mach/irqs-board-u5500.h>
-#endif
-
#define NR_IRQS IRQ_BOARD_END
#endif /* ASM_ARCH_IRQS_H */
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __INC_STE_MBOX_H
-#define __INC_STE_MBOX_H
-
-#define MBOX_BUF_SIZE 16
-#define MBOX_NAME_SIZE 8
-
-/**
- * mbox_recv_cb_t - Definition of the mailbox callback.
- * @mbox_msg: The mailbox message.
- * @priv: The clients private data as specified in the call to mbox_setup.
- *
- * This function will be called upon reception of new mailbox messages.
- */
-typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
-
-/**
- * struct mbox - Mailbox instance struct
- * @list: Linked list head.
- * @pdev: Pointer to device struct.
- * @cb: Callback function. Will be called
- * when new data is received.
- * @client_data: Clients private data. Will be sent back
- * in the callback function.
- * @virtbase_peer: Virtual address for outgoing mailbox.
- * @virtbase_local: Virtual address for incoming mailbox.
- * @buffer: Then internal queue for outgoing messages.
- * @name: Name of this mailbox.
- * @buffer_available: Completion variable to achieve "blocking send".
- * This variable will be signaled when there is
- * internal buffer space available.
- * @client_blocked: To keep track if any client is currently
- * blocked.
- * @lock: Spinlock to protect this mailbox instance.
- * @write_index: Index in internal buffer to write to.
- * @read_index: Index in internal buffer to read from.
- * @allocated: Indicates whether this particular mailbox
- * id has been allocated by someone.
- */
-struct mbox {
- struct list_head list;
- struct platform_device *pdev;
- mbox_recv_cb_t *cb;
- void *client_data;
- void __iomem *virtbase_peer;
- void __iomem *virtbase_local;
- u32 buffer[MBOX_BUF_SIZE];
- char name[MBOX_NAME_SIZE];
- struct completion buffer_available;
- u8 client_blocked;
- spinlock_t lock;
- u8 write_index;
- u8 read_index;
- bool allocated;
-};
-
-/**
- * mbox_setup - Set up a mailbox and return its instance.
- * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU,
- * 2 for modem DSP.
- * @mbox_cb: Pointer to the callback function to be called when a new message
- * is received.
- * @priv: Client user data which will be returned in the callback.
- *
- * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
- */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
-
-/**
- * mbox_send - Send a mailbox message.
- * @mbox: Mailbox instance (returned by mbox_setup)
- * @mbox_msg: The mailbox message to send.
- * @block: Specifies whether this call will block until send is possible,
- * or return an error if the mailbox buffer is full.
- *
- * Returns 0 on success or a negative error code on error. -ENOMEM indicates
- * that the internal buffer is full and you have to try again later (or
- * specify "block" in order to block until send is possible).
- */
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
-
-#endif /*INC_STE_MBOX_H*/
#include <linux/init.h>
void __init ux500_map_io(void);
-extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
-extern struct device * __init u5500_init_devices(void);
extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
-extern void __init u5500_sdi_init(struct device *parent);
-
-extern void __init db5500_dma_init(struct device *parent);
-
extern struct device *ux500_soc_device_init(const char *soc_id);
struct amba_device;
static inline void arch_decomp_setup(void)
{
- /* Check in run time if we run on an U8500 or U5500 */
- if (machine_is_u5500())
- ux500_uart_base = U5500_UART0_BASE;
- else
- ux500_uart_base = U8500_UART2_BASE;
+ /* Use machine_is_foo() macro if you need to switch base someday */
+ ux500_uart_base = U8500_UART2_BASE;
}
#define arch_decomp_wdog() /* nothing to do here */
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-/*
- * Mailbox nomenclature:
- *
- * APE MODEM
- * mbox pairX
- * ..........................
- * . .
- * . peer .
- * . send ---- .
- * . --> | | .
- * . | | .
- * . ---- .
- * . .
- * . local .
- * . rec ---- .
- * . | | <-- .
- * . | | .
- * . ---- .
- * .........................
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/completion.h>
-#include <mach/mbox-db5500.h>
-
-#define MBOX_NAME "mbox"
-
-#define MBOX_FIFO_DATA 0x000
-#define MBOX_FIFO_ADD 0x004
-#define MBOX_FIFO_REMOVE 0x008
-#define MBOX_FIFO_THRES_FREE 0x00C
-#define MBOX_FIFO_THRES_OCCUP 0x010
-#define MBOX_FIFO_STATUS 0x014
-
-#define MBOX_DISABLE_IRQ 0x4
-#define MBOX_ENABLE_IRQ 0x0
-#define MBOX_LATCH 1
-
-/* Global list of all mailboxes */
-static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
-
-static struct mbox *get_mbox_with_id(u8 id)
-{
- u8 i;
- struct list_head *pos = &mboxs;
- for (i = 0; i <= id; i++)
- pos = pos->next;
-
- return (struct mbox *) list_entry(pos, struct mbox, list);
-}
-
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
-{
- int res = 0;
-
- spin_lock(&mbox->lock);
-
- dev_dbg(&(mbox->pdev->dev),
- "About to buffer 0x%X to mailbox 0x%X."
- " ri = %d, wi = %d\n",
- mbox_msg, (u32)mbox, mbox->read_index,
- mbox->write_index);
-
- /* Check if write buffer is full */
- while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
- if (!block) {
- dev_dbg(&(mbox->pdev->dev),
- "Buffer full in non-blocking call! "
- "Returning -ENOMEM!\n");
- res = -ENOMEM;
- goto exit;
- }
- spin_unlock(&mbox->lock);
- dev_dbg(&(mbox->pdev->dev),
- "Buffer full in blocking call! Sleeping...\n");
- mbox->client_blocked = 1;
- wait_for_completion(&mbox->buffer_available);
- dev_dbg(&(mbox->pdev->dev),
- "Blocking send was woken up! Trying again...\n");
- spin_lock(&mbox->lock);
- }
-
- mbox->buffer[mbox->write_index] = mbox_msg;
- mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
-
- /*
- * Indicate that we want an IRQ as soon as there is a slot
- * in the FIFO
- */
- writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
-exit:
- spin_unlock(&mbox->lock);
- return res;
-}
-EXPORT_SYMBOL(mbox_send);
-
-#if defined(CONFIG_DEBUG_FS)
-/*
- * Expected input: <value> <nbr sends>
- * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
- */
-static ssize_t mbox_write_fifo(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- unsigned long mbox_mess;
- unsigned long nbr_sends;
- unsigned long i;
- char int_buf[16];
- char *token;
- char *val;
-
- struct mbox *mbox = (struct mbox *) dev->platform_data;
-
- strncpy((char *) &int_buf, buf, sizeof(int_buf));
- token = (char *) &int_buf;
-
- /* Parse message */
- val = strsep(&token, " ");
- if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
- mbox_mess = 0xDEADBEEF;
-
- val = strsep(&token, " ");
- if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
- nbr_sends = 1;
-
- dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
- mbox_mess, nbr_sends, (u32) mbox);
-
- for (i = 0; i < nbr_sends; i++)
- mbox_send(mbox, mbox_mess, true);
-
- return count;
-}
-
-static ssize_t mbox_read_fifo(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- int mbox_value;
- struct mbox *mbox = (struct mbox *) dev->platform_data;
-
- if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
- return sprintf(buf, "Mailbox is empty\n");
-
- mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
- writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
- return sprintf(buf, "0x%X\n", mbox_value);
-}
-
-static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
-
-static int mbox_show(struct seq_file *s, void *data)
-{
- struct list_head *pos;
- u8 mbox_index = 0;
-
- list_for_each(pos, &mboxs) {
- struct mbox *m =
- (struct mbox *) list_entry(pos, struct mbox, list);
- if (m == NULL) {
- seq_printf(s,
- "Unable to retrieve mailbox %d\n",
- mbox_index);
- continue;
- }
-
- spin_lock(&m->lock);
- if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
- seq_printf(s, "MAILBOX %d not setup or corrupt\n",
- mbox_index);
- spin_unlock(&m->lock);
- continue;
- }
-
- seq_printf(s,
- "===========================\n"
- " MAILBOX %d\n"
- " PEER MAILBOX DUMP\n"
- "---------------------------\n"
- "FIFO: 0x%X (%d)\n"
- "Free Threshold: 0x%.2X (%d)\n"
- "Occupied Threshold: 0x%.2X (%d)\n"
- "Status: 0x%.2X (%d)\n"
- " Free spaces (ot): %d (%d)\n"
- " Occup spaces (ot): %d (%d)\n"
- "===========================\n"
- " LOCAL MAILBOX DUMP\n"
- "---------------------------\n"
- "FIFO: 0x%.X (%d)\n"
- "Free Threshold: 0x%.2X (%d)\n"
- "Occupied Threshold: 0x%.2X (%d)\n"
- "Status: 0x%.2X (%d)\n"
- " Free spaces (ot): %d (%d)\n"
- " Occup spaces (ot): %d (%d)\n"
- "===========================\n"
- "write_index: %d\n"
- "read_index : %d\n"
- "===========================\n"
- "\n",
- mbox_index,
- readl(m->virtbase_peer + MBOX_FIFO_DATA),
- readl(m->virtbase_peer + MBOX_FIFO_DATA),
- readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
- readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
- readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
- readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
- readl(m->virtbase_peer + MBOX_FIFO_STATUS),
- readl(m->virtbase_peer + MBOX_FIFO_STATUS),
- (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
- (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
- (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
- (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
- readl(m->virtbase_local + MBOX_FIFO_DATA),
- readl(m->virtbase_local + MBOX_FIFO_DATA),
- readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
- readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
- readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
- readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
- readl(m->virtbase_local + MBOX_FIFO_STATUS),
- readl(m->virtbase_local + MBOX_FIFO_STATUS),
- (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
- (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
- (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
- (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
- m->write_index, m->read_index);
- mbox_index++;
- spin_unlock(&m->lock);
- }
-
- return 0;
-}
-
-static int mbox_open(struct inode *inode, struct file *file)
-{
- return single_open(file, mbox_show, NULL);
-}
-
-static const struct file_operations mbox_operations = {
- .owner = THIS_MODULE,
- .open = mbox_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-#endif
-
-static irqreturn_t mbox_irq(int irq, void *arg)
-{
- u32 mbox_value;
- int nbr_occup;
- int nbr_free;
- struct mbox *mbox = (struct mbox *) arg;
-
- spin_lock(&mbox->lock);
-
- dev_dbg(&(mbox->pdev->dev),
- "mbox IRQ [%d] received. ri = %d, wi = %d\n",
- irq, mbox->read_index, mbox->write_index);
-
- /*
- * Check if we have any outgoing messages, and if there is space for
- * them in the FIFO.
- */
- if (mbox->read_index != mbox->write_index) {
- /*
- * Check by reading FREE for LOCAL since that indicates
- * OCCUP for PEER
- */
- nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
- >> 4) & 0x7;
- dev_dbg(&(mbox->pdev->dev),
- "Status indicates %d empty spaces in the FIFO!\n",
- nbr_free);
-
- while ((nbr_free > 0) &&
- (mbox->read_index != mbox->write_index)) {
- /* Write the message and latch it into the FIFO */
- writel(mbox->buffer[mbox->read_index],
- (mbox->virtbase_peer + MBOX_FIFO_DATA));
- writel(MBOX_LATCH,
- (mbox->virtbase_peer + MBOX_FIFO_ADD));
- dev_dbg(&(mbox->pdev->dev),
- "Wrote message 0x%X to addr 0x%X\n",
- mbox->buffer[mbox->read_index],
- (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
-
- nbr_free--;
- mbox->read_index =
- (mbox->read_index + 1) % MBOX_BUF_SIZE;
- }
-
- /*
- * Check if we still want IRQ:s when there is free
- * space to send
- */
- if (mbox->read_index != mbox->write_index) {
- dev_dbg(&(mbox->pdev->dev),
- "Still have messages to send, but FIFO full. "
- "Request IRQ again!\n");
- writel(MBOX_ENABLE_IRQ,
- mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
- } else {
- dev_dbg(&(mbox->pdev->dev),
- "No more messages to send. "
- "Do not request IRQ again!\n");
- writel(MBOX_DISABLE_IRQ,
- mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
- }
-
- /*
- * Check if we can signal any blocked clients that it is OK to
- * start buffering again
- */
- if (mbox->client_blocked &&
- (((mbox->write_index + 1) % MBOX_BUF_SIZE)
- != mbox->read_index)) {
- dev_dbg(&(mbox->pdev->dev),
- "Waking up blocked client\n");
- complete(&mbox->buffer_available);
- mbox->client_blocked = 0;
- }
- }
-
- /* Check if we have any incoming messages */
- nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
- if (nbr_occup == 0)
- goto exit;
-
- if (mbox->cb == NULL) {
- dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
- "leaving %d incoming messages in fifo!\n", nbr_occup);
- goto exit;
- }
-
- /* Read and acknowledge the message */
- mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
- writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
-
- /* Notify consumer of new mailbox message */
- dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
- mbox_value);
- mbox->cb(mbox_value, mbox->client_data);
-
-exit:
- dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
- mbox->read_index, mbox->write_index);
- spin_unlock(&mbox->lock);
-
- return IRQ_HANDLED;
-}
-
-/* Setup is executed once for each mbox pair */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
-{
- struct resource *resource;
- int irq;
- int res;
- struct mbox *mbox;
-
- mbox = get_mbox_with_id(mbox_id);
- if (mbox == NULL) {
- dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
- mbox_id);
- goto exit;
- }
-
- /*
- * Check if mailbox has been allocated to someone else,
- * otherwise allocate it
- */
- if (mbox->allocated) {
- dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
- mbox_id);
- mbox = NULL;
- goto exit;
- }
- mbox->allocated = true;
-
- dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
- mbox_id, (u32)mbox);
-
- mbox->client_data = priv;
- mbox->cb = mbox_cb;
-
- /* Get addr for peer mailbox and ioremap it */
- resource = platform_get_resource_byname(mbox->pdev,
- IORESOURCE_MEM,
- "mbox_peer");
- if (resource == NULL) {
- dev_err(&(mbox->pdev->dev),
- "Unable to retrieve mbox peer resource\n");
- mbox = NULL;
- goto exit;
- }
- dev_dbg(&(mbox->pdev->dev),
- "Resource name: %s start: 0x%X, end: 0x%X\n",
- resource->name, resource->start, resource->end);
- mbox->virtbase_peer = ioremap(resource->start, resource_size(resource));
- if (!mbox->virtbase_peer) {
- dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
- mbox = NULL;
- goto exit;
- }
- dev_dbg(&(mbox->pdev->dev),
- "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
- resource->start, resource->end, (u32) mbox->virtbase_peer);
-
- /* Get addr for local mailbox and ioremap it */
- resource = platform_get_resource_byname(mbox->pdev,
- IORESOURCE_MEM,
- "mbox_local");
- if (resource == NULL) {
- dev_err(&(mbox->pdev->dev),
- "Unable to retrieve mbox local resource\n");
- mbox = NULL;
- goto exit;
- }
- dev_dbg(&(mbox->pdev->dev),
- "Resource name: %s start: 0x%X, end: 0x%X\n",
- resource->name, resource->start, resource->end);
- mbox->virtbase_local = ioremap(resource->start, resource_size(resource));
- if (!mbox->virtbase_local) {
- dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
- mbox = NULL;
- goto exit;
- }
- dev_dbg(&(mbox->pdev->dev),
- "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
- resource->start, resource->end, (u32) mbox->virtbase_peer);
-
- init_completion(&mbox->buffer_available);
- mbox->client_blocked = 0;
-
- /* Get IRQ for mailbox and allocate it */
- irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
- if (irq < 0) {
- dev_err(&(mbox->pdev->dev),
- "Unable to retrieve mbox irq resource\n");
- mbox = NULL;
- goto exit;
- }
-
- dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
- res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
- if (res < 0) {
- dev_err(&(mbox->pdev->dev),
- "Unable to allocate mbox irq %d\n", irq);
- mbox = NULL;
- goto exit;
- }
-
- /* Set up mailbox to not launch IRQ on free space in mailbox */
- writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
-
- /*
- * Set up mailbox to launch IRQ on new message if we have
- * a callback set. If not, do not raise IRQ, but keep message
- * in FIFO for manual retrieval
- */
- if (mbox_cb != NULL)
- writel(MBOX_ENABLE_IRQ,
- mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
- else
- writel(MBOX_DISABLE_IRQ,
- mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
-
-#if defined(CONFIG_DEBUG_FS)
- res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
- if (res != 0)
- dev_warn(&(mbox->pdev->dev),
- "Unable to create mbox sysfs entry");
-
- (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
- NULL, &mbox_operations);
-#endif
-
- dev_info(&(mbox->pdev->dev),
- "Mailbox driver with index %d initiated!\n", mbox_id);
-
-exit:
- return mbox;
-}
-EXPORT_SYMBOL(mbox_setup);
-
-
-int __init mbox_probe(struct platform_device *pdev)
-{
- struct mbox local_mbox;
- struct mbox *mbox;
- int res = 0;
- dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
-
- memset(&local_mbox, 0x0, sizeof(struct mbox));
-
- /* Associate our mbox data with the platform device */
- res = platform_device_add_data(pdev,
- (void *) &local_mbox,
- sizeof(struct mbox));
- if (res != 0) {
- dev_err(&(pdev->dev),
- "Unable to allocate driver platform data!\n");
- goto exit;
- }
-
- mbox = (struct mbox *) pdev->dev.platform_data;
- mbox->pdev = pdev;
- mbox->write_index = 0;
- mbox->read_index = 0;
-
- INIT_LIST_HEAD(&(mbox->list));
- list_add_tail(&(mbox->list), &mboxs);
-
- sprintf(mbox->name, "%s", MBOX_NAME);
- spin_lock_init(&mbox->lock);
-
- dev_info(&(pdev->dev), "Mailbox driver loaded\n");
-
-exit:
- return res;
-}
-
-static struct platform_driver mbox_driver = {
- .driver = {
- .name = MBOX_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init mbox_init(void)
-{
- return platform_driver_probe(&mbox_driver, mbox_probe);
-}
-
-module_init(mbox_init);
-
-void __exit mbox_exit(void)
-{
- platform_driver_unregister(&mbox_driver);
-}
-
-module_exit(mbox_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MBOX driver");
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <mach/id.h>
-
-#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
-#define MODEM_INTCON_SIZE 0xFFF
-
-#define DEST_IRQ41_OFFSET 0x2A4
-#define DEST_IRQ43_OFFSET 0x2AC
-#define DEST_IRQ45_OFFSET 0x2B4
-
-#define PRIO_IRQ41_OFFSET 0x6A4
-#define PRIO_IRQ43_OFFSET 0x6AC
-#define PRIO_IRQ45_OFFSET 0x6B4
-
-#define ALLOW_IRQ_OFFSET 0x104
-
-#define MODEM_INTCON_CPU_NBR 0x1
-#define MODEM_INTCON_PRIO_HIGH 0x0
-
-#define MODEM_INTCON_ALLOW_IRQ41 0x0200
-#define MODEM_INTCON_ALLOW_IRQ43 0x0800
-#define MODEM_INTCON_ALLOW_IRQ45 0x2000
-
-#define MODEM_IRQ_REG_OFFSET 0x4
-
-struct modem_irq {
- void __iomem *modem_intcon_base;
-};
-
-
-static void setup_modem_intcon(void __iomem *modem_intcon_base)
-{
- /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
- writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
- writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
- writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
-
- /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
- writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
- writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
- writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
-
- /* IC_ALLOW_ARRAY - IRQ enable */
- writel(MODEM_INTCON_ALLOW_IRQ41 |
- MODEM_INTCON_ALLOW_IRQ43 |
- MODEM_INTCON_ALLOW_IRQ45,
- modem_intcon_base + ALLOW_IRQ_OFFSET);
-}
-
-static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
-{
- int real_irq;
- int virt_irq;
- struct modem_irq *mi = (struct modem_irq *)data;
-
- /* Read modem side IRQ number from modem IRQ controller */
- real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
- virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
-
- pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
- "which will be 0x%X (%d) which translates to "
- "virtual IRQ 0x%X (%d)!\n",
- (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
- real_irq,
- real_irq & 0xFF,
- real_irq & 0xFF,
- virt_irq,
- virt_irq);
-
- if (virt_irq != 0)
- generic_handle_irq(virt_irq);
-
- pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
-
- return IRQ_HANDLED;
-}
-
-static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
-{
- irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
-
- pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
-}
-
-static int modem_irq_init(void)
-{
- int err;
- static struct irq_chip modem_irq_chip;
- struct modem_irq *mi;
-
- if (!cpu_is_u5500())
- return -ENODEV;
-
- pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
- IRQ_DB5500_MODEM);
-
- mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
- if (!mi) {
- pr_err("modem_irq: Could not allocate device\n");
- return -ENOMEM;
- }
-
- mi->modem_intcon_base =
- ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
- pr_debug("modem_irq: ioremapped modem_intcon_base from "
- "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
- (u32)mi->modem_intcon_base);
-
- setup_modem_intcon(mi->modem_intcon_base);
-
- modem_irq_chip = dummy_irq_chip;
- modem_irq_chip.name = "modem_irq";
-
- /* Create the virtual IRQ:s needed */
- create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
- create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
- create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
-
- err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
- modem_cpu_irq_handler, IRQF_ONESHOT,
- "modem_irq", mi);
- if (err)
- pr_err("modem_irq: Could not register IRQ %d\n",
- IRQ_DB5500_MODEM);
-
- return 0;
-}
-
-arch_initcall(modem_irq_init);
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License, version 2
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- */
-
-#ifndef __MACH_DB5500_PINS_H
-#define __MACH_DB5500_PINS_H
-
-#define GPIO0_GPIO PIN_CFG(0, GPIO)
-#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A)
-
-#define GPIO1_GPIO PIN_CFG(1, GPIO)
-#define GPIO1_SM_A3 PIN_CFG(1, ALT_A)
-
-#define GPIO2_GPIO PIN_CFG(2, GPIO)
-#define GPIO2_SM_A4 PIN_CFG(2, ALT_A)
-#define GPIO2_SM_AVD PIN_CFG(2, ALT_B)
-
-#define GPIO3_GPIO PIN_CFG(3, GPIO)
-#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A)
-
-#define GPIO4_GPIO PIN_CFG(4, GPIO)
-#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A)
-
-#define GPIO5_GPIO PIN_CFG(5, GPIO)
-#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A)
-#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B)
-
-#define GPIO6_GPIO PIN_CFG(6, GPIO)
-#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A)
-#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B)
-
-#define GPIO7_GPIO PIN_CFG(7, GPIO)
-#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A)
-#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B)
-
-#define GPIO8_GPIO PIN_CFG(8, GPIO)
-#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A)
-#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B)
-
-#define GPIO9_GPIO PIN_CFG(9, GPIO)
-#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A)
-#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B)
-
-#define GPIO10_GPIO PIN_CFG(10, GPIO)
-#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A)
-#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B)
-
-#define GPIO11_GPIO PIN_CFG(11, GPIO)
-#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A)
-#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B)
-
-#define GPIO12_GPIO PIN_CFG(12, GPIO)
-#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A)
-#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B)
-
-#define GPIO13_GPIO PIN_CFG(13, GPIO)
-#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A)
-#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B)
-#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C)
-
-#define GPIO14_GPIO PIN_CFG(14, GPIO)
-#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A)
-#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B)
-#define GPIO14_SM_CKO PIN_CFG(14, ALT_C)
-
-#define GPIO15_GPIO PIN_CFG(15, GPIO)
-#define GPIO15_SM_A5 PIN_CFG(15, ALT_A)
-#define GPIO15_SM_CLE PIN_CFG(15, ALT_B)
-
-#define GPIO16_GPIO PIN_CFG(16, GPIO)
-#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A)
-#define GPIO16_SM_OEn PIN_CFG(16, ALT_B)
-
-#define GPIO17_GPIO PIN_CFG(17, GPIO)
-#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A)
-#define GPIO17_SM_WEn PIN_CFG(17, ALT_B)
-
-#define GPIO18_GPIO PIN_CFG(18, GPIO)
-#define GPIO18_SM_A6 PIN_CFG(18, ALT_A)
-#define GPIO18_SM_ALE PIN_CFG(18, ALT_B)
-#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C)
-
-#define GPIO19_GPIO PIN_CFG(19, GPIO)
-#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A)
-#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B)
-
-#define GPIO20_GPIO PIN_CFG(20, GPIO)
-#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A)
-#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B)
-
-#define GPIO21_GPIO PIN_CFG(21, GPIO)
-#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A)
-#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B)
-
-#define GPIO22_GPIO PIN_CFG(22, GPIO)
-#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A)
-#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B)
-
-#define GPIO23_GPIO PIN_CFG(23, GPIO)
-#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A)
-#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B)
-#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C)
-
-#define GPIO24_GPIO PIN_CFG(24, GPIO)
-#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A)
-#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B)
-#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C)
-
-#define GPIO25_GPIO PIN_CFG(25, GPIO)
-#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A)
-#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B)
-#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C)
-
-#define GPIO26_GPIO PIN_CFG(26, GPIO)
-#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A)
-#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B)
-
-#define GPIO27_GPIO PIN_CFG(27, GPIO)
-#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A)
-#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B)
-
-#define GPIO28_GPIO PIN_CFG(28, GPIO)
-#define GPIO28_U0_TXD PIN_CFG(28, ALT_A)
-#define GPIO28_SM_A0 PIN_CFG(28, ALT_B)
-
-#define GPIO29_GPIO PIN_CFG(29, GPIO)
-#define GPIO29_U0_RXD PIN_CFG(29, ALT_A)
-#define GPIO29_SM_A1 PIN_CFG(29, ALT_B)
-#define GPIO29_PWM_0 PIN_CFG(29, ALT_C)
-
-#define GPIO30_GPIO PIN_CFG(30, GPIO)
-#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
-#define GPIO30_SM_A2 PIN_CFG(30, ALT_B)
-#define GPIO30_PWM_1 PIN_CFG(30, ALT_C)
-
-#define GPIO31_GPIO PIN_CFG(31, GPIO)
-#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A)
-#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B)
-#define GPIO31_PWM_2 PIN_CFG(31, ALT_C)
-
-#define GPIO32_GPIO PIN_CFG(32, GPIO)
-#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A)
-#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B)
-
-#define GPIO33_GPIO PIN_CFG(33, GPIO)
-#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A)
-#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B)
-
-#define GPIO34_GPIO PIN_CFG(34, GPIO)
-#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A)
-#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B)
-
-#define GPIO35_GPIO PIN_CFG(35, GPIO)
-#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A)
-#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B)
-
-#define GPIO64_GPIO PIN_CFG(64, GPIO)
-#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A)
-#define GPIO64_U0_TXD PIN_CFG(64, ALT_B)
-
-#define GPIO65_GPIO PIN_CFG(65, GPIO)
-#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A)
-#define GPIO65_U0_RXD PIN_CFG(65, ALT_B)
-
-#define GPIO66_GPIO PIN_CFG(66, GPIO)
-#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A)
-
-#define GPIO67_GPIO PIN_CFG(67, GPIO)
-#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A)
-
-#define GPIO68_GPIO PIN_CFG(68, GPIO)
-#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A)
-
-#define GPIO69_GPIO PIN_CFG(69, GPIO)
-#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A)
-
-#define GPIO70_GPIO PIN_CFG(70, GPIO)
-#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A)
-
-#define GPIO71_GPIO PIN_CFG(71, GPIO)
-#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A)
-
-#define GPIO72_GPIO PIN_CFG(72, GPIO)
-#define GPIO72_USB_STP PIN_CFG(72, ALT_A)
-
-#define GPIO73_GPIO PIN_CFG(73, GPIO)
-#define GPIO73_USB_DIR PIN_CFG(73, ALT_A)
-
-#define GPIO74_GPIO PIN_CFG(74, GPIO)
-#define GPIO74_USB_NXT PIN_CFG(74, ALT_A)
-
-#define GPIO75_GPIO PIN_CFG(75, GPIO)
-#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A)
-
-#define GPIO76_GPIO PIN_CFG(76, GPIO)
-
-#define GPIO77_GPIO PIN_CFG(77, GPIO)
-#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A)
-
-#define GPIO78_GPIO PIN_CFG(78, GPIO)
-#define GPIO78_IRQn PIN_CFG(78, ALT_A)
-
-#define GPIO79_GPIO PIN_CFG(79, GPIO)
-#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A)
-
-#define GPIO80_GPIO PIN_CFG(80, GPIO)
-#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A)
-
-#define GPIO81_GPIO PIN_CFG(81, GPIO)
-#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A)
-
-#define GPIO82_GPIO PIN_CFG(82, GPIO)
-#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A)
-
-#define GPIO96_GPIO PIN_CFG(96, GPIO)
-#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A)
-#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B)
-#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C)
-
-#define GPIO97_GPIO PIN_CFG(97, GPIO)
-#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A)
-#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B)
-#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C)
-
-#define GPIO98_GPIO PIN_CFG(98, GPIO)
-#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A)
-#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B)
-#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C)
-
-#define GPIO99_GPIO PIN_CFG(99, GPIO)
-#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A)
-#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B)
-#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C)
-
-#define GPIO100_GPIO PIN_CFG(100, GPIO)
-#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A)
-
-#define GPIO101_GPIO PIN_CFG(101, GPIO)
-#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A)
-
-#define GPIO128_GPIO PIN_CFG(128, GPIO)
-#define GPIO128_KP_I0 PIN_CFG(128, ALT_A)
-#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B)
-
-#define GPIO129_GPIO PIN_CFG(129, GPIO)
-#define GPIO129_KP_O0 PIN_CFG(129, ALT_A)
-#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B)
-
-#define GPIO130_GPIO PIN_CFG(130, GPIO)
-#define GPIO130_KP_I1 PIN_CFG(130, ALT_A)
-#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B)
-
-#define GPIO131_GPIO PIN_CFG(131, GPIO)
-#define GPIO131_KP_O1 PIN_CFG(131, ALT_A)
-#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B)
-
-#define GPIO132_GPIO PIN_CFG(132, GPIO)
-#define GPIO132_KP_I2 PIN_CFG(132, ALT_A)
-#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B)
-#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C)
-
-#define GPIO133_GPIO PIN_CFG(133, GPIO)
-#define GPIO133_KP_O2 PIN_CFG(133, ALT_A)
-#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B)
-#define GPIO133_U0_RXD PIN_CFG(133, ALT_C)
-
-#define GPIO134_GPIO PIN_CFG(134, GPIO)
-#define GPIO134_KP_I3 PIN_CFG(134, ALT_A)
-#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B)
-#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C)
-
-#define GPIO135_GPIO PIN_CFG(135, GPIO)
-#define GPIO135_KP_O3 PIN_CFG(135, ALT_A)
-#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B)
-#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C)
-
-#define GPIO136_GPIO PIN_CFG(136, GPIO)
-#define GPIO136_KP_I4 PIN_CFG(136, ALT_A)
-#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B)
-#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C)
-
-#define GPIO137_GPIO PIN_CFG(137, GPIO)
-#define GPIO137_KP_O4 PIN_CFG(137, ALT_A)
-#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B)
-#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C)
-
-#define GPIO138_GPIO PIN_CFG(138, GPIO)
-#define GPIO138_KP_I5 PIN_CFG(138, ALT_A)
-#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B)
-#define GPIO138_U0_TXD PIN_CFG(138, ALT_C)
-
-#define GPIO139_GPIO PIN_CFG(139, GPIO)
-#define GPIO139_KP_O5 PIN_CFG(139, ALT_A)
-#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B)
-#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C)
-
-#define GPIO140_GPIO PIN_CFG(140, GPIO)
-#define GPIO140_KP_I6 PIN_CFG(140, ALT_A)
-#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B)
-#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C)
-
-#define GPIO141_GPIO PIN_CFG(141, GPIO)
-#define GPIO141_KP_O6 PIN_CFG(141, ALT_A)
-#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B)
-#define GPIO141_U0_RXD PIN_CFG(141, ALT_C)
-
-#define GPIO142_GPIO PIN_CFG(142, GPIO)
-#define GPIO142_KP_I7 PIN_CFG(142, ALT_A)
-#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B)
-#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C)
-
-#define GPIO143_GPIO PIN_CFG(143, GPIO)
-#define GPIO143_KP_O7 PIN_CFG(143, ALT_A)
-#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B)
-#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C)
-
-#define GPIO144_GPIO PIN_CFG(144, GPIO)
-#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A)
-#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B)
-#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C)
-
-#define GPIO145_GPIO PIN_CFG(145, GPIO)
-#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A)
-#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B)
-#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C)
-
-#define GPIO146_GPIO PIN_CFG(146, GPIO)
-#define GPIO146_PWM_0 PIN_CFG(146, ALT_A)
-#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B)
-
-#define GPIO147_GPIO PIN_CFG(147, GPIO)
-#define GPIO147_PWM_1 PIN_CFG(147, ALT_A)
-#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B)
-
-#define GPIO148_GPIO PIN_CFG(148, GPIO)
-#define GPIO148_PWM_2 PIN_CFG(148, ALT_A)
-#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B)
-
-#define GPIO160_GPIO PIN_CFG(160, GPIO)
-#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A)
-
-#define GPIO161_GPIO PIN_CFG(161, GPIO)
-#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A)
-
-#define GPIO162_GPIO PIN_CFG(162, GPIO)
-#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A)
-
-#define GPIO163_GPIO PIN_CFG(163, GPIO)
-
-#define GPIO164_GPIO PIN_CFG(164, GPIO)
-#define GPIO164_GPS_START PIN_CFG(164, ALT_A)
-
-#define GPIO165_GPIO PIN_CFG(165, GPIO)
-#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A)
-#define GPIO165_U3_RXD PIN_CFG(165, ALT_B)
-#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C)
-
-#define GPIO166_GPIO PIN_CFG(166, GPIO)
-#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A)
-#define GPIO166_U3_TXD PIN_CFG(166, ALT_B)
-#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C)
-
-#define GPIO167_GPIO PIN_CFG(167, GPIO)
-#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A)
-#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B)
-#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C)
-
-#define GPIO168_GPIO PIN_CFG(168, GPIO)
-#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A)
-#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B)
-#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C)
-
-#define GPIO169_GPIO PIN_CFG(169, GPIO)
-#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A)
-#define GPIO169_DDR_RC PIN_CFG(169, ALT_B)
-#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C)
-
-#define GPIO170_GPIO PIN_CFG(170, GPIO)
-#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A)
-
-#define GPIO171_GPIO PIN_CFG(171, GPIO)
-#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A)
-#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B)
-#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C)
-
-#define GPIO172_GPIO PIN_CFG(172, GPIO)
-#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A)
-#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B)
-#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C)
-
-#define GPIO173_GPIO PIN_CFG(173, GPIO)
-#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A)
-#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B)
-#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C)
-
-#define GPIO174_GPIO PIN_CFG(174, GPIO)
-#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A)
-#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B)
-#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C)
-
-#define GPIO175_GPIO PIN_CFG(175, GPIO)
-#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A)
-#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B)
-#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C)
-
-#define GPIO176_GPIO PIN_CFG(176, GPIO)
-#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A)
-#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B)
-
-#define GPIO177_GPIO PIN_CFG(177, GPIO)
-#define GPIO177_U2_RXD PIN_CFG(177, ALT_A)
-#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B)
-#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C)
-
-#define GPIO178_GPIO PIN_CFG(178, GPIO)
-#define GPIO178_U2_TXD PIN_CFG(178, ALT_A)
-#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B)
-#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C)
-
-#define GPIO179_GPIO PIN_CFG(179, GPIO)
-#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A)
-#define GPIO179_U3_RXD PIN_CFG(179, ALT_B)
-#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C)
-
-#define GPIO180_GPIO PIN_CFG(180, GPIO)
-#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A)
-#define GPIO180_U3_TXD PIN_CFG(180, ALT_B)
-#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C)
-
-#define GPIO185_GPIO PIN_CFG(185, GPIO)
-#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A)
-#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B)
-
-#define GPIO186_GPIO PIN_CFG(186, GPIO)
-#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A)
-#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B)
-
-#define GPIO187_GPIO PIN_CFG(187, GPIO)
-#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A)
-#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B)
-
-#define GPIO188_GPIO PIN_CFG(188, GPIO)
-#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A)
-#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B)
-
-#define GPIO189_GPIO PIN_CFG(189, GPIO)
-#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A)
-#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B)
-
-#define GPIO190_GPIO PIN_CFG(190, GPIO)
-#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A)
-#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B)
-
-#define GPIO191_GPIO PIN_CFG(191, GPIO)
-#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A)
-#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B)
-#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C)
-
-#define GPIO192_GPIO PIN_CFG(192, GPIO)
-#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A)
-#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B)
-#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C)
-
-#define GPIO193_GPIO PIN_CFG(193, GPIO)
-#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A)
-#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B)
-#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C)
-
-#define GPIO194_GPIO PIN_CFG(194, GPIO)
-#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A)
-#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B)
-#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C)
-
-#define GPIO195_GPIO PIN_CFG(195, GPIO)
-#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A)
-#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B)
-#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C)
-
-#define GPIO196_GPIO PIN_CFG(196, GPIO)
-#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A)
-#define GPIO196_U0_RXD PIN_CFG(196, ALT_B)
-#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C)
-
-#define GPIO197_GPIO PIN_CFG(197, GPIO)
-#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A)
-#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B)
-
-#define GPIO198_GPIO PIN_CFG(198, GPIO)
-#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A)
-
-#define GPIO199_GPIO PIN_CFG(199, GPIO)
-#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A)
-#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B)
-
-#define GPIO200_GPIO PIN_CFG(200, GPIO)
-#define GPIO200_U1_TXD PIN_CFG(200, ALT_A)
-#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B)
-
-#define GPIO201_GPIO PIN_CFG(201, GPIO)
-#define GPIO201_U1_RXD PIN_CFG(201, ALT_A)
-#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B)
-
-#define GPIO202_GPIO PIN_CFG(202, GPIO)
-#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A)
-#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B)
-
-#define GPIO203_GPIO PIN_CFG(203, GPIO)
-#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A)
-#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B)
-
-#define GPIO204_GPIO PIN_CFG(204, GPIO)
-#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A)
-#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B)
-#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C)
-
-#define GPIO205_GPIO PIN_CFG(205, GPIO)
-#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A)
-#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B)
-#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C)
-
-#define GPIO206_GPIO PIN_CFG(206, GPIO)
-#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A)
-#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B)
-#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C)
-
-#define GPIO207_GPIO PIN_CFG(207, GPIO)
-#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A)
-#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B)
-#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C)
-
-#define GPIO208_GPIO PIN_CFG(208, GPIO)
-#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A)
-#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B)
-#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C)
-
-#define GPIO209_GPIO PIN_CFG(209, GPIO)
-#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A)
-#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B)
-#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C)
-
-#define GPIO210_GPIO PIN_CFG(210, GPIO)
-#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A)
-#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B)
-
-#define GPIO211_GPIO PIN_CFG(211, GPIO)
-#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A)
-#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B)
-
-#define GPIO212_GPIO PIN_CFG(212, GPIO)
-#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A)
-#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B)
-
-#define GPIO213_GPIO PIN_CFG(213, GPIO)
-#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A)
-#define GPIO213_LCD_DE PIN_CFG(213, ALT_B)
-#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C)
-
-#define GPIO214_GPIO PIN_CFG(214, GPIO)
-#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A)
-#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B)
-#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C)
-
-#define GPIO215_GPIO PIN_CFG(215, GPIO)
-#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A)
-#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B)
-#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C)
-
-#define GPIO216_GPIO PIN_CFG(216, GPIO)
-#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A)
-#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B)
-
-#define GPIO217_GPIO PIN_CFG(217, GPIO)
-#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A)
-#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B)
-#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C)
-
-#define GPIO218_GPIO PIN_CFG(218, GPIO)
-#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A)
-#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B)
-
-#define GPIO219_GPIO PIN_CFG(219, GPIO)
-#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A)
-#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B)
-
-#define GPIO220_GPIO PIN_CFG(220, GPIO)
-#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A)
-#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B)
-
-#define GPIO221_GPIO PIN_CFG(221, GPIO)
-#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A)
-#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B)
-
-#define GPIO222_GPIO PIN_CFG(222, GPIO)
-#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A)
-#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B)
-
-#define GPIO223_GPIO PIN_CFG(223, GPIO)
-#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A)
-#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B)
-
-#define GPIO224_GPIO PIN_CFG(224, GPIO)
-#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A)
-#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B)
-
-#define GPIO225_GPIO PIN_CFG(225, GPIO)
-#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A)
-#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B)
-
-#define GPIO226_GPIO PIN_CFG(226, GPIO)
-#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A)
-#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B)
-
-#define GPIO227_GPIO PIN_CFG(227, GPIO)
-#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A)
-#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B)
-
-#endif
static void __iomem *scu_base_addr(void)
{
- if (cpu_is_u5500())
- return __io_address(U5500_SCU_BASE);
- else if (cpu_is_u8500())
+ if (cpu_is_u8500())
return __io_address(U8500_SCU_BASE);
else
ux500_unknown_soc();
{
void __iomem *backupram;
- if (cpu_is_u5500())
- backupram = __io_address(U5500_BACKUPRAM0_BASE);
- else if (cpu_is_u8500())
+ if (cpu_is_u8500())
backupram = __io_address(U8500_BACKUPRAM0_BASE);
else
ux500_unknown_soc();
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- *
- * DB5500-SoC-specific configuration for DMA40
- */
-
-#ifndef STE_DMA40_DB5500_H
-#define STE_DMA40_DB5500_H
-
-#define DB5500_DMA_NR_DEV 64
-
-enum dma_src_dev_type {
- DB5500_DMA_DEV0_SPI0_RX = 0,
- DB5500_DMA_DEV1_SPI1_RX = 1,
- DB5500_DMA_DEV2_SPI2_RX = 2,
- DB5500_DMA_DEV3_SPI3_RX = 3,
- DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
- DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
- DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
- DB5500_DMA_DEV7_IRDA_RFS = 7,
- DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
- DB5500_DMA_DEV9_MSP0_RX = 9,
- DB5500_DMA_DEV10_MSP1_RX = 10,
- DB5500_DMA_DEV11_MSP2_RX = 11,
- DB5500_DMA_DEV12_UART0_RX = 12,
- DB5500_DMA_DEV13_UART1_RX = 13,
- DB5500_DMA_DEV14_UART2_RX = 14,
- DB5500_DMA_DEV15_UART3_RX = 15,
- DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
- DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
- DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
- DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
- DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
- DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
- DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
- DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
- DB5500_DMA_DEV24_SDMMC0_RX = 24,
- DB5500_DMA_DEV25_SDMMC1_RX = 25,
- DB5500_DMA_DEV26_SDMMC2_RX = 26,
- DB5500_DMA_DEV27_SDMMC3_RX = 27,
- DB5500_DMA_DEV28_SDMMC4_RX = 28,
- /* 29 - 32 not used */
- DB5500_DMA_DEV33_SDMMC0_RX = 33,
- DB5500_DMA_DEV34_SDMMC1_RX = 34,
- DB5500_DMA_DEV35_SDMMC2_RX = 35,
- DB5500_DMA_DEV36_SDMMC3_RX = 36,
- DB5500_DMA_DEV37_SDMMC4_RX = 37,
- DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
- DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
- DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
- DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
- DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
- DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
- DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
- DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
- /* 46 not used */
- DB5500_DMA_DEV47_MCDE_RX = 47,
- DB5500_DMA_DEV48_CRYPTO1_RX = 48,
- /* 49, 50 not used */
- DB5500_DMA_DEV49_I2C1_RX = 51,
- DB5500_DMA_DEV50_I2C3_RX = 52,
- DB5500_DMA_DEV51_I2C2_RX = 53,
- /* 54 - 60 not used */
- DB5500_DMA_DEV61_CRYPTO0_RX = 61,
- /* 62, 63 not used */
-};
-
-enum dma_dest_dev_type {
- DB5500_DMA_DEV0_SPI0_TX = 0,
- DB5500_DMA_DEV1_SPI1_TX = 1,
- DB5500_DMA_DEV2_SPI2_TX = 2,
- DB5500_DMA_DEV3_SPI3_TX = 3,
- DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
- DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
- DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
- DB5500_DMA_DEV7_IRRC_TX = 7,
- DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
- DB5500_DMA_DEV9_MSP0_TX = 9,
- DB5500_DMA_DEV10_MSP1_TX = 10,
- DB5500_DMA_DEV11_MSP2_TX = 11,
- DB5500_DMA_DEV12_UART0_TX = 12,
- DB5500_DMA_DEV13_UART1_TX = 13,
- DB5500_DMA_DEV14_UART2_TX = 14,
- DB5500_DMA_DEV15_UART3_TX = 15,
- DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
- DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
- DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
- DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
- DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
- DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
- DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
- DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
- DB5500_DMA_DEV24_SDMMC0_TX = 24,
- DB5500_DMA_DEV25_SDMMC1_TX = 25,
- DB5500_DMA_DEV26_SDMMC2_TX = 26,
- DB5500_DMA_DEV27_SDMMC3_TX = 27,
- DB5500_DMA_DEV28_SDMMC4_TX = 28,
- /* 29 - 31 not used */
- DB5500_DMA_DEV32_FSMC_TX = 32,
- DB5500_DMA_DEV33_SDMMC0_TX = 33,
- DB5500_DMA_DEV34_SDMMC1_TX = 34,
- DB5500_DMA_DEV35_SDMMC2_TX = 35,
- DB5500_DMA_DEV36_SDMMC3_TX = 36,
- DB5500_DMA_DEV37_SDMMC4_TX = 37,
- DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
- DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
- DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
- DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
- DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
- DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
- DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
- DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
- /* 46 not used */
- DB5500_DMA_DEV47_STM_TX = 47,
- DB5500_DMA_DEV48_CRYPTO1_TX = 48,
- DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
- DB5500_DMA_DEV50_HASH1_TX = 50,
- DB5500_DMA_DEV51_I2C1_TX = 51,
- DB5500_DMA_DEV52_I2C3_TX = 52,
- DB5500_DMA_DEV53_I2C2_TX = 53,
- /* 54, 55 not used */
- DB5500_DMA_MEMCPY_TX_1 = 56,
- DB5500_DMA_MEMCPY_TX_2 = 57,
- DB5500_DMA_MEMCPY_TX_3 = 58,
- DB5500_DMA_MEMCPY_TX_4 = 59,
- DB5500_DMA_MEMCPY_TX_5 = 60,
- DB5500_DMA_DEV61_CRYPTO0_TX = 61,
- DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
- DB5500_DMA_DEV63_HASH0_TX = 63,
-};
-
-#endif
#include <mach/irqs.h>
#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(u5500_twd_local_timer,
- U5500_TWD_BASE, IRQ_LOCALTIMER);
static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
U8500_TWD_BASE, IRQ_LOCALTIMER);
struct twd_local_timer *twd_local_timer;
int err;
- twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
- &u8500_twd_local_timer;
+ /* Use this to switch local timer base if changed in new ASICs */
+ twd_local_timer = &u8500_twd_local_timer;
if (of_have_populated_dt())
twd_local_timer_of_register();
void __iomem *mtu_timer_base;
void __iomem *prcmu_timer_base;
- if (cpu_is_u5500()) {
- mtu_timer_base = __io_address(U5500_MTU0_BASE);
- prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
- } else if (cpu_is_u8500()) {
+ if (cpu_is_u8500()) {
mtu_timer_base = __io_address(U8500_MTU0_BASE);
prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
} else {
* depending on delay which is not yet calibrated. RTC-RTT is in the
* always-on powerdomain and is used as clockevent instead of twd when
* sleeping.
- * The PRCMU timer 4(3 for DB5500) register a clocksource and
+ * The PRCMU timer 4 register a clocksource and
* sched_clock with higher rating then MTU since is always-on.
*
*/
#define MX51_PAD_NANDF_RB1__GPIO3_9 IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__NANDF_RB1 IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB1__PATA_IORDY IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__SD4_CMD IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__DISP2_WAIT IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
#define MX51_PAD_NANDF_RB2__GPIO3_10 IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB2__USBH3_NXT IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__DISP1_WAIT IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__GPIO3_11 IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RB3__USBH3_CLK IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_NAND__GPIO_NAND IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO_NAND__PATA_INTRQ IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS0__GPIO3_16 IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_CS2__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS2__PATA_CS_0 IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS2__SD4_CLK IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS3__GPIO3_19 IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_CS3__NANDF_CS3 IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS3__PATA_CS_1 IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS3__SD4_DAT0 IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_CS4__FEC_TDATA1 IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
#define MX51_PAD_NANDF_CS4__GPIO3_20 IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_CS4__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
#define MX51_PAD_NANDF_RDY_INT__GPIO3_24 IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_NANDF_D15__GPIO3_25 IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_NANDF_D15__NANDF_D15 IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT6__DISP2_DAT6 IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT6__FEC_TDATA1 IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO1_19 IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT6__KEY_ROW4 IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT6__USBH3_STP IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT7__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT7__FEC_TDATA2 IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO1_29 IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT7__KEY_ROW5 IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT7__USBH3_NXT IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT8__DISP2_DAT8 IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT8__FEC_TDATA3 IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO1_30 IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT8__KEY_ROW6 IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT8__USBH3_DATA0 IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT9__AUD6_RXC IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT9__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT9__FEC_TX_EN IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO1_31 IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT9__USBH3_DATA1 IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT11__AUD6_TXD IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__GPIO1_10 IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT11__USBH3_DATA3 IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT12__AUD6_RXD IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA3__CSPI_SS1 IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_GPIO1_0__CSPI_SS2 IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_0__SD1_CD IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
#define MX51_PAD_GPIO1_1__CSPI_MISO IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_1__SD1_WP IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__CSPI_MOSI IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_SD2_CMD__I2C1_SCL IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_SD2_CLK__CSPI_SCLK IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_SD2_DATA1__SD1_DAT5 IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA2__SD1_DAT6 IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA3__CSPI_SS2 IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
#define MX51_PAD_SD2_DATA3__SD1_DAT7 IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
#define MX51_PAD_GPIO1_2__CCM_OUT_2 IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__GPIO1_2 IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_2__I2C2_SCL IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
#define MX51_PAD_GPIO1_2__PLL1_BYP IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_2__PWM1_PWMO IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPIO1_3 IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__I2C2_SDA IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
#define MX51_PAD_GPIO1_3__PLL2_BYP IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_3__PWM2_PWMO IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_4__EIM_RDY IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__CSI2_MCLK IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__DISP2_PIN16 IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_6__DISP2_PIN17 IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPIO1_6 IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_6__REF_EN_B IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_7__CCM_OUT_0 IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_7__SD2_WP IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
#define MX51_PAD_GPIO1_7__SPDIF_OUT1 IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_8__CSI2_DATA_EN IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_8__SD2_CD IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
#define MX51_PAD_GPIO1_8__USBH3_PWR IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__CCM_OUT_1 IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__DISP2_D1_CS IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__DISP2_SER_CS IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__SD2_LCTL IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO1_9__USBH3_OC IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
#define MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
#define MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_GPIO_8__ESAI1_TX5_RX0 IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
#define MX53_PAD_GPIO_8__GPIO1_8 IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_GPIO_8__EPIT2_EPITO IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
#define MX53_PAD_GPIO_8__UART2_RXD_MUX IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
#define MX53_PAD_GPIO_8__FIRI_TXD IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
#define MX53_PAD_GPIO_8__SPDIF_SRCLK IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
obj-n :=
obj- :=
-# OCPI interconnect support for 1710, 1610 and 5912
-obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
-
# omap_device support (OMAP2+ only at the moment)
obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
#include <plat/board.h>
#include <plat/vram.h>
#include <plat/dsp.h>
+#include <plat/dma.h>
#include <plat/omap-secure.h>
#include <plat/tc.h>
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support. Used
+ * to size arrays. (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT 32
+
#undef DEBUG
#ifndef CONFIG_ARCH_OMAP1
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
- char dma_chan_link_map[dma_lch_count];
+ char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
dma_chan_link_map[lch] = 1;
/* Set the link register of the first channel */
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
- char dma_chan_link_map[dma_lch_count];
+ char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
do {
int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
- struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
+ struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
return -EINVAL;
+ pdata = timer->pdev->dev.platform_data;
if (!pdata->needs_manual_reset)
rate = clk_get_rate(timer->fclk);
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
u32 (*usb1_init)(unsigned nwires);
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+
+ int (*ocpi_enable)(void);
};
struct omap_lcd_config {
extern int __init omap_init_clocksource_32k(void);
+extern void __init omap_check_revision(void);
+
extern void omap_reserve(void);
extern int omap_dss_reset(struct omap_hwmod *);
u32 (*dma_read)(int reg, int lch);
};
+extern void __init omap_init_consistent_dma_size(void);
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
OMAP_TIMER_V1_SYS_STAT_OFFSET;
timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = 0;
+ timer->irq_dis = NULL;
timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
timer->func_base = timer->io_base;
} else {
timer->revision = 2;
- timer->sys_stat = 0;
+ timer->sys_stat = NULL;
timer->irq_stat = timer->io_base + OMAP_TIMER_V2_IRQSTATUS;
timer->irq_ena = timer->io_base + OMAP_TIMER_V2_IRQENABLE_SET;
timer->irq_dis = timer->io_base + OMAP_TIMER_V2_IRQENABLE_CLR;
*/
#define OCP_USER_MPU (1 << 0)
#define OCP_USER_SDMA (1 << 1)
+#define OCP_USER_DSP (1 << 2)
/* omap_hwmod_ocp_if.flags bits */
#define OCPIF_SWSUP_IDLE (1 << 0)
#define OCPIF_CAN_BURST (1 << 1)
+/* omap_hwmod_ocp_if._int_flags possibilities */
+#define _OCPIF_INT_FLAGS_REGISTERED (1 << 0)
+
+
/**
* struct omap_hwmod_ocp_if - OCP interface data
* @master: struct omap_hwmod that initiates OCP transactions on this link
* @width: OCP data width
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
+ * @_int_flags: internal flags (see _OCPIF_INT_FLAGS* macros above)
*
* It may also be useful to add a tag_cnt field for OCP2.x devices.
*
u8 width;
u8 user;
u8 flags;
+ u8 _int_flags;
};
* then this field has to be populated with the correct offset structure.
*/
struct omap_hwmod_class_sysconfig {
- u16 rev_offs;
- u16 sysc_offs;
- u16 syss_offs;
+ u32 rev_offs;
+ u32 sysc_offs;
+ u32 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
int (*reset)(struct omap_hwmod *oh);
};
+/**
+ * struct omap_hwmod_link - internal structure linking hwmods with ocp_ifs
+ * @ocp_if: OCP interface structure record pointer
+ * @node: list_head pointing to next struct omap_hwmod_link in a list
+ */
+struct omap_hwmod_link {
+ struct omap_hwmod_ocp_if *ocp_if;
+ struct list_head node;
+};
+
/**
* struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
* @name: name of the hwmod
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
* @voltdm: pointer to voltage domain (filled in at runtime)
- * @masters: ptr to array of OCP ifs that this hwmod can initiate on
- * @slaves: ptr to array of OCP ifs that this hwmod can respond on
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_mpu_rt_va: cached register target start address (internal use)
- * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @_mpu_port: cached MPU register target slave (internal use)
* @opt_clks_cnt: number of @opt_clks
* @master_cnt: number of @master entries
* @slaves_cnt: number of @slave entries
*
* Parameter names beginning with an underscore are managed internally by
* the omap_hwmod code and should not be set during initialization.
+ *
+ * @masters and @slaves are now deprecated.
*/
struct omap_hwmod {
const char *name;
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
struct clockdomain *clkdm;
- struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
- struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
+ struct list_head master_ports; /* connect to *_IA */
+ struct list_head slave_ports; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
spinlock_t _lock;
struct list_head node;
+ struct omap_hwmod_ocp_if *_mpu_port;
u16 flags;
- u8 _mpu_port_index;
u8 response_lat;
u8 rst_lines_cnt;
u8 opt_clks_cnt;
u8 _postsetup_state;
};
-int omap_hwmod_register(struct omap_hwmod **ohs);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data);
int omap_hwmod_count_resources(struct omap_hwmod *oh);
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
+ const char *name, struct resource *res);
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
extern int omap3xxx_hwmod_init(void);
extern int omap44xx_hwmod_init(void);
+extern int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois);
+
#endif
+++ /dev/null
-/*
- * linux/arch/arm/plat-omap/ocpi.c
- *
- * Minimal OCP bus support for omap16xx
- *
- * Copyright (C) 2003 - 2005 Nokia Corporation
- * Written by Tony Lindgren <tony@atomide.com>
- *
- * Modified for clock framework by Paul Mundt <paul.mundt@nokia.com>.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define OCPI_BASE 0xfffec320
-#define OCPI_FAULT (OCPI_BASE + 0x00)
-#define OCPI_CMD_FAULT (OCPI_BASE + 0x04)
-#define OCPI_SINT0 (OCPI_BASE + 0x08)
-#define OCPI_TABORT (OCPI_BASE + 0x0c)
-#define OCPI_SINT1 (OCPI_BASE + 0x10)
-#define OCPI_PROT (OCPI_BASE + 0x14)
-#define OCPI_SEC (OCPI_BASE + 0x18)
-
-/* USB OHCI OCPI access error registers */
-#define HOSTUEADDR 0xfffba0e0
-#define HOSTUESTATUS 0xfffba0e4
-
-static struct clk *ocpi_ck;
-
-/*
- * Enables device access to OMAP buses via the OCPI bridge
- * FIXME: Add locking
- */
-int ocpi_enable(void)
-{
- unsigned int val;
-
- if (!cpu_is_omap16xx())
- return -ENODEV;
-
- /* Enable access for OHCI in OCPI */
- val = omap_readl(OCPI_PROT);
- val &= ~0xff;
- //val &= (1 << 0); /* Allow access only to EMIFS */
- omap_writel(val, OCPI_PROT);
-
- val = omap_readl(OCPI_SEC);
- val &= ~0xff;
- omap_writel(val, OCPI_SEC);
-
- return 0;
-}
-EXPORT_SYMBOL(ocpi_enable);
-
-static int __init omap_ocpi_init(void)
-{
- if (!cpu_is_omap16xx())
- return -ENODEV;
-
- ocpi_ck = clk_get(NULL, "l3_ocpi_ck");
- if (IS_ERR(ocpi_ck))
- return PTR_ERR(ocpi_ck);
-
- clk_enable(ocpi_ck);
- ocpi_enable();
- printk("OMAP OCPI interconnect driver loaded\n");
-
- return 0;
-}
-
-static void __exit omap_ocpi_exit(void)
-{
- /* REVISIT: Disable OCPI */
-
- if (!cpu_is_omap16xx())
- return;
-
- clk_disable(ocpi_ck);
- clk_put(ocpi_ck);
-}
-
-MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
-MODULE_DESCRIPTION("OMAP OCPI bus controller module");
-MODULE_LICENSE("GPL");
-module_init(omap_ocpi_init);
-module_exit(omap_ocpi_exit);
static int omap_device_fill_resources(struct omap_device *od,
struct resource *res)
{
- int c = 0;
int i, r;
for (i = 0; i < od->hwmods_cnt; i++) {
r = omap_hwmod_fill_resources(od->hwmods[i], res);
res += r;
- c += r;
}
return 0;
* Looks like we need to preserve some bootloader code at the
* beginning of SRAM for jumping to flash for reboot to work...
*/
- memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
- omap_sram_size - SRAM_BOOTLOADER_SZ);
+ memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+ omap_sram_size - SRAM_BOOTLOADER_SZ);
}
/*
#include <mach/hardware.h>
-#include "../mach-omap2/common.h"
-
#ifdef CONFIG_ARCH_OMAP_OTG
void __init
#endif
pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
omap_writel(syscon, OTG_SYSCON_1);
-
- status = 0;
}
#else
config HW_RANDOM_ATMEL
tristate "Atmel Random Number Generator support"
- depends on HW_RANDOM && ARCH_AT91SAM9G45
+ depends on HW_RANDOM && HAVE_CLK
default HW_RANDOM
---help---
This driver provides kernel-side support for the Random Number
config CLKSRC_DBX500_PRCMU
bool "Clocksource PRCMU Timer"
- depends on UX500_SOC_DB5500 || UX500_SOC_DB8500
+ depends on UX500_SOC_DB8500
default y
help
Use the always on PRCMU Timer as clocksource
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on ARCH_AT91
help
Say Y here if you have a 4-wire touchscreen connected to the
- ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
+ ADC Controller on your Atmel SoC.
If unsure, say N.
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
-config AB5500_CORE
- bool "ST-Ericsson AB5500 Mixed Signal Power Management chip"
- depends on ABX500_CORE && MFD_DB5500_PRCMU
- select MFD_CORE
- help
- Select this option to enable access to AB5500 power management
- chip. This connects to the db5500 chip via the I2C bus via PRCMU.
- This chip embeds various other multimedia funtionalities as well.
-
-config AB5500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB5500_CORE && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information from the AB5500
- using the debug filesystem, debugfs.
-
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE
system controller running an XP70 microprocessor, which is accessed
through a register map.
-config MFD_DB5500_PRCMU
- bool "ST-Ericsson DB5500 Power Reset Control Management Unit"
- depends on UX500_SOC_DB5500
- select MFD_CORE
- help
- Select this option to enable support for the DB5500 Power Reset
- and Control Management Unit. This is basically an autonomous
- system controller running an XP70 microprocessor, which is accessed
- through a register map.
-
config MFD_CS5535
tristate "Support for CS5535 and CS5536 southbridge core functions"
select MFD_CORE
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB5500_CORE) += ab5500-core.o
-obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
# ab8500-i2c need to come after db8500-prcmu (which provides the channel)
obj-$(CONFIG_AB8500_I2C_CORE) += ab8500-i2c.o
-obj-$(CONFIG_MFD_DB5500_PRCMU) += db5500-prcmu.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
+++ /dev/null
-/*
- * Copyright (C) 2007-2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Low-level core for exclusive access to the AB5500 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- * Author: Karl Komierowski <karl.komierowski@stericsson.com>
- * Author: Bibek Basu <bibek.basu@stericsson.com>
- *
- * TODO: Event handling with irq_chip. Waiting for PRCMU fw support.
- */
-
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/device.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/spinlock.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/db5500-prcmu.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-#define AB5500_NUM_EVENT_REG 23
-#define AB5500_IT_LATCH0_REG 0x40
-#define AB5500_IT_MASK0_REG 0x60
-
-/*
- * Permissible register ranges for reading and writing per device and bank.
- *
- * The ranges must be listed in increasing address order, and no overlaps are
- * allowed. It is assumed that write permission implies read permission
- * (i.e. only RO and RW permissions should be used). Ranges with write
- * permission must not be split up.
- */
-
-#define NO_RANGE {.count = 0, .range = NULL,}
-static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = {
- [AB5500_DEVID_USB] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_USB,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x83,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x87,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8B,
- .last = 0x8B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x91,
- .last = 0x92,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x93,
- .last = 0x93,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x94,
- .last = 0x94,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xA8,
- .last = 0xB0,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB2,
- .last = 0xB2,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB4,
- .last = 0xBC,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xBF,
- .last = 0xBF,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xC1,
- .last = 0xC5,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- },
- },
- [AB5500_DEVID_ADC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_ADC,
- .nranges = 6,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x1F,
- .last = 0x22,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x23,
- .last = 0x24,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x26,
- .last = 0x2D,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x34,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x37,
- .last = 0x57,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x58,
- .last = 0x58,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- },
- },
- [AB5500_DEVID_LEDS] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_LED,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_VIDEO] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_VDENC,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x08,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x09,
- .last = 0x09,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0A,
- .last = 0x12,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x15,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1B,
- .last = 0x21,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x27,
- .last = 0x2C,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x41,
- .last = 0x41,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x45,
- .last = 0x5B,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x5D,
- .last = 0x5D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x69,
- .last = 0x69,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x6C,
- .last = 0x6D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x81,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_REGULATORS] = {
- .nbanks = 2,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_STARTUP,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1F,
- .last = 0x1F,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x2E,
- .last = 0x2E,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x30,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x50,
- .last = 0x51,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x60,
- .last = 0x61,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x66,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8C,
- .last = 0x96,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xAA,
- .last = 0xB4,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xB7,
- .last = 0xBF,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xC1,
- .last = 0xCA,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xD3,
- .last = 0xE0,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- {
- .bankid = AB5500_BANK_SIM_USBSIM,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x13,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_SIM] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_SIM_USBSIM,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x13,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_RTC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_RTC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x04,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x06,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_CHARGER] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_CHG,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x11,
- .last = 0x11,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x12,
- .last = 0x1B,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_FUELGAUGE] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_FG_BATTCOM_ACC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0C,
- .last = 0x10,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_VIBRATOR] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_VIBRA,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x13,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xFE,
- .last = 0xFE,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_CODEC] = {
- .nbanks = 1,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x48,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xEB,
- .last = 0xFB,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
- [AB5500_DEVID_POWER] = {
- .nbanks = 2,
- .bank = (struct ab5500_i2c_ranges []) {
- {
- .bankid = AB5500_BANK_STARTUP,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x30,
- .last = 0x30,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- {
- .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- },
- },
-};
-
-#define AB5500_IRQ(bank, bit) ((bank) * 8 + (bit))
-
-/* I appologize for the resource names beeing a mix of upper case
- * and lower case but I want them to be exact as the documentation */
-static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = {
- [AB5500_DEVID_LEDS] = {
- .name = "ab5500-leds",
- .id = AB5500_DEVID_LEDS,
- },
- [AB5500_DEVID_POWER] = {
- .name = "ab5500-power",
- .id = AB5500_DEVID_POWER,
- },
- [AB5500_DEVID_REGULATORS] = {
- .name = "ab5500-regulator",
- .id = AB5500_DEVID_REGULATORS,
- },
- [AB5500_DEVID_SIM] = {
- .name = "ab5500-sim",
- .id = AB5500_DEVID_SIM,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "SIMOFF",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(2, 0), /*rising*/
- .end = AB5500_IRQ(2, 1), /*falling*/
- },
- },
- },
- [AB5500_DEVID_RTC] = {
- .name = "ab5500-rtc",
- .id = AB5500_DEVID_RTC,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "RTC_Alarm",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 7),
- .end = AB5500_IRQ(1, 7),
- }
- },
- },
- [AB5500_DEVID_CHARGER] = {
- .name = "ab5500-charger",
- .id = AB5500_DEVID_CHARGER,
- },
- [AB5500_DEVID_ADC] = {
- .name = "ab5500-adc",
- .id = AB5500_DEVID_ADC,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "TRIGGER-0",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 0),
- .end = AB5500_IRQ(0, 0),
- },
- {
- .name = "TRIGGER-1",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 1),
- .end = AB5500_IRQ(0, 1),
- },
- {
- .name = "TRIGGER-2",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 2),
- .end = AB5500_IRQ(0, 2),
- },
- {
- .name = "TRIGGER-3",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 3),
- .end = AB5500_IRQ(0, 3),
- },
- {
- .name = "TRIGGER-4",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 4),
- .end = AB5500_IRQ(0, 4),
- },
- {
- .name = "TRIGGER-5",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 5),
- .end = AB5500_IRQ(0, 5),
- },
- {
- .name = "TRIGGER-6",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 6),
- .end = AB5500_IRQ(0, 6),
- },
- {
- .name = "TRIGGER-7",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 7),
- .end = AB5500_IRQ(0, 7),
- },
- {
- .name = "TRIGGER-VBAT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 8),
- .end = AB5500_IRQ(0, 8),
- },
- {
- .name = "TRIGGER-VBAT-TXON",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(0, 9),
- .end = AB5500_IRQ(0, 9),
- },
- },
- },
- [AB5500_DEVID_FUELGAUGE] = {
- .name = "ab5500-fuelgauge",
- .id = AB5500_DEVID_FUELGAUGE,
- .num_resources = 6,
- .resources = (struct resource[]) {
- {
- .name = "Batt_attach",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 5),
- .end = AB5500_IRQ(7, 5),
- },
- {
- .name = "Batt_removal",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 6),
- .end = AB5500_IRQ(7, 6),
- },
- {
- .name = "UART_framing",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(7, 7),
- .end = AB5500_IRQ(7, 7),
- },
- {
- .name = "UART_overrun",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 0),
- .end = AB5500_IRQ(8, 0),
- },
- {
- .name = "UART_Rdy_RX",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 1),
- .end = AB5500_IRQ(8, 1),
- },
- {
- .name = "UART_Rdy_TX",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 2),
- .end = AB5500_IRQ(8, 2),
- },
- },
- },
- [AB5500_DEVID_VIBRATOR] = {
- .name = "ab5500-vibrator",
- .id = AB5500_DEVID_VIBRATOR,
- },
- [AB5500_DEVID_CODEC] = {
- .name = "ab5500-codec",
- .id = AB5500_DEVID_CODEC,
- .num_resources = 3,
- .resources = (struct resource[]) {
- {
- .name = "audio_spkr1_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 5),
- .end = AB5500_IRQ(9, 5),
- },
- {
- .name = "audio_plllocked",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 6),
- .end = AB5500_IRQ(9, 6),
- },
- {
- .name = "audio_spkr2_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 4),
- .end = AB5500_IRQ(17, 4),
- },
- },
- },
- [AB5500_DEVID_USB] = {
- .name = "ab5500-usb",
- .id = AB5500_DEVID_USB,
- .num_resources = 36,
- .resources = (struct resource[]) {
- {
- .name = "Link_Update",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(22, 1),
- .end = AB5500_IRQ(22, 1),
- },
- {
- .name = "DCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 3),
- .end = AB5500_IRQ(8, 4),
- },
- {
- .name = "VBUS_R",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 5),
- .end = AB5500_IRQ(8, 5),
- },
- {
- .name = "VBUS_F",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 6),
- .end = AB5500_IRQ(8, 6),
- },
- {
- .name = "CHGstate_10_PCVBUSchg",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(8, 7),
- .end = AB5500_IRQ(8, 7),
- },
- {
- .name = "DCIOreverse_ovc",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 0),
- .end = AB5500_IRQ(9, 0),
- },
- {
- .name = "USBCharDetDone",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 1),
- .end = AB5500_IRQ(9, 1),
- },
- {
- .name = "DCIO_no_limit",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 2),
- .end = AB5500_IRQ(9, 2),
- },
- {
- .name = "USB_suspend",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 3),
- .end = AB5500_IRQ(9, 3),
- },
- {
- .name = "DCIOreverse_fwdcurrent",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 4),
- .end = AB5500_IRQ(9, 4),
- },
- {
- .name = "Vbus_Imeasmax_change",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(9, 5),
- .end = AB5500_IRQ(9, 6),
- },
- {
- .name = "OVV",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 5),
- .end = AB5500_IRQ(14, 5),
- },
- {
- .name = "USBcharging_NOTok",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 3),
- .end = AB5500_IRQ(15, 3),
- },
- {
- .name = "usb_adp_sensoroff",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 6),
- .end = AB5500_IRQ(15, 6),
- },
- {
- .name = "usb_adp_probeplug",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 7),
- .end = AB5500_IRQ(15, 7),
- },
- {
- .name = "usb_adp_sinkerror",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 0),
- .end = AB5500_IRQ(16, 6),
- },
- {
- .name = "usb_adp_sourceerror",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 1),
- .end = AB5500_IRQ(16, 1),
- },
- {
- .name = "usb_idgnd_r",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 2),
- .end = AB5500_IRQ(16, 2),
- },
- {
- .name = "usb_idgnd_f",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 3),
- .end = AB5500_IRQ(16, 3),
- },
- {
- .name = "usb_iddetR1",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 4),
- .end = AB5500_IRQ(16, 5),
- },
- {
- .name = "usb_iddetR2",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(16, 6),
- .end = AB5500_IRQ(16, 7),
- },
- {
- .name = "usb_iddetR3",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 0),
- .end = AB5500_IRQ(17, 1),
- },
- {
- .name = "usb_iddetR4",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 2),
- .end = AB5500_IRQ(17, 3),
- },
- {
- .name = "CharTempWindowOk",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(17, 7),
- .end = AB5500_IRQ(18, 0),
- },
- {
- .name = "USB_SprDetect",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 1),
- .end = AB5500_IRQ(18, 1),
- },
- {
- .name = "usb_adp_probe_unplug",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 2),
- .end = AB5500_IRQ(18, 2),
- },
- {
- .name = "VBUSChDrop",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 3),
- .end = AB5500_IRQ(18, 4),
- },
- {
- .name = "dcio_char_rec_done",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 5),
- .end = AB5500_IRQ(18, 5),
- },
- {
- .name = "Charging_stopped_by_temp",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(18, 6),
- .end = AB5500_IRQ(18, 6),
- },
- {
- .name = "CHGstate_11_SafeModeVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 1),
- .end = AB5500_IRQ(21, 2),
- },
- {
- .name = "CHGstate_12_comletedVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 2),
- .end = AB5500_IRQ(21, 2),
- },
- {
- .name = "CHGstate_13_completedVBUS",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 3),
- .end = AB5500_IRQ(21, 3),
- },
- {
- .name = "CHGstate_14_FullChgDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 4),
- .end = AB5500_IRQ(21, 4),
- },
- {
- .name = "CHGstate_15_SafeModeDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 5),
- .end = AB5500_IRQ(21, 5),
- },
- {
- .name = "CHGstate_16_OFFsuspendDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 6),
- .end = AB5500_IRQ(21, 6),
- },
- {
- .name = "CHGstate_17_completedDCIO",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(21, 7),
- .end = AB5500_IRQ(21, 7),
- },
- },
- },
- [AB5500_DEVID_OTP] = {
- .name = "ab5500-otp",
- .id = AB5500_DEVID_OTP,
- },
- [AB5500_DEVID_VIDEO] = {
- .name = "ab5500-video",
- .id = AB5500_DEVID_VIDEO,
- .num_resources = 1,
- .resources = (struct resource[]) {
- {
- .name = "plugTVdet",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(22, 2),
- .end = AB5500_IRQ(22, 2),
- },
- },
- },
- [AB5500_DEVID_DBIECI] = {
- .name = "ab5500-dbieci",
- .id = AB5500_DEVID_DBIECI,
- .num_resources = 10,
- .resources = (struct resource[]) {
- {
- .name = "COLL",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 0),
- .end = AB5500_IRQ(14, 0),
- },
- {
- .name = "RESERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 1),
- .end = AB5500_IRQ(14, 1),
- },
- {
- .name = "FRAERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 2),
- .end = AB5500_IRQ(14, 2),
- },
- {
- .name = "COMERR",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 3),
- .end = AB5500_IRQ(14, 3),
- },
- {
- .name = "BSI_indicator",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 4),
- .end = AB5500_IRQ(14, 4),
- },
- {
- .name = "SPDSET",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 6),
- .end = AB5500_IRQ(14, 6),
- },
- {
- .name = "DSENT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(14, 7),
- .end = AB5500_IRQ(14, 7),
- },
- {
- .name = "DREC",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 0),
- .end = AB5500_IRQ(15, 0),
- },
- {
- .name = "ACCINT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 1),
- .end = AB5500_IRQ(15, 1),
- },
- {
- .name = "NOPINT",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(15, 2),
- .end = AB5500_IRQ(15, 2),
- },
- },
- },
- [AB5500_DEVID_ONSWA] = {
- .name = "ab5500-onswa",
- .id = AB5500_DEVID_ONSWA,
- .num_resources = 2,
- .resources = (struct resource[]) {
- {
- .name = "ONSWAn_rising",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 3),
- .end = AB5500_IRQ(1, 3),
- },
- {
- .name = "ONSWAn_falling",
- .flags = IORESOURCE_IRQ,
- .start = AB5500_IRQ(1, 4),
- .end = AB5500_IRQ(1, 4),
- },
- },
- },
-};
-
-/*
- * Functionality for getting/setting register values.
- */
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab,
- u8 bank, u8 reg,
- u8 *value)
-{
- int err;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1);
-
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-static int get_register_page_interruptible(struct ab5500 *ab, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- int err;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- while (numregs) {
- /* The hardware limit for get page is 4 */
- u8 curnum = min_t(u8, numregs, 4u);
-
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
- first_reg, regvals, curnum);
- if (err)
- goto out;
-
- numregs -= curnum;
- first_reg += curnum;
- regvals += curnum;
- }
-
-out:
- mutex_unlock(&ab->access_mutex);
- return err;
-}
-
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
-{
- int err = 0;
-
- if (bank >= AB5500_NUM_BANKS)
- return -EINVAL;
-
- if (bitmask) {
- u8 buf;
-
- err = mutex_lock_interruptible(&ab->access_mutex);
- if (err)
- return err;
-
- if (bitmask == 0xFF) /* No need to read in this case. */
- buf = bitvalues;
- else { /* Read and modify the register value. */
- err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr,
- reg, &buf, 1);
- if (err)
- return err;
-
- buf = ((~bitmask & buf) | (bitmask & bitvalues));
- }
- /* Write the new value. */
- err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg,
- &buf, 1);
-
- mutex_unlock(&ab->access_mutex);
- }
- return err;
-}
-
-static int
-set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value)
-{
- return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
- 0xff, value);
-}
-
-/*
- * Read/write permission checking functions.
- */
-static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank)
-{
- u8 i;
-
- if (devid < AB5500_NUM_DEVICES) {
- for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) {
- if (ab5500_bank_ranges[devid].bank[i].bankid == bank)
- return &ab5500_bank_ranges[devid].bank[i];
- }
- }
- return NULL;
-}
-
-static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
- u8 i; /* range loop index */
- const struct ab5500_i2c_ranges *bankref;
-
- bankref = get_bankref(devid, bank);
- if (bankref == NULL || last_reg < first_reg)
- return false;
-
- for (i = 0; i < bankref->nranges; i++) {
- if (first_reg < bankref->range[i].first)
- break;
- if ((last_reg <= bankref->range[i].last) &&
- (bankref->range[i].perm & AB5500_PERM_WR))
- return true;
- }
- return false;
-}
-
-static bool reg_write_allowed(u8 devid, u8 bank, u8 reg)
-{
- return page_write_allowed(devid, bank, reg, reg);
-}
-
-static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg)
-{
- u8 i;
- const struct ab5500_i2c_ranges *bankref;
-
- bankref = get_bankref(devid, bank);
- if (bankref == NULL || last_reg < first_reg)
- return false;
-
-
- /* Find the range (if it exists in the list) that includes first_reg. */
- for (i = 0; i < bankref->nranges; i++) {
- if (first_reg < bankref->range[i].first)
- return false;
- if (first_reg <= bankref->range[i].last)
- break;
- }
- /* Make sure that the entire range up to and including last_reg is
- * readable. This may span several of the ranges in the list.
- */
- while ((i < bankref->nranges) &&
- (bankref->range[i].perm & AB5500_PERM_RD)) {
- if (last_reg <= bankref->range[i].last)
- return true;
- if ((++i >= bankref->nranges) ||
- (bankref->range[i].first !=
- (bankref->range[i - 1].last + 1))) {
- break;
- }
- }
- return false;
-}
-
-static bool reg_read_allowed(u8 devid, u8 bank, u8 reg)
-{
- return page_read_allowed(devid, bank, reg, reg);
-}
-
-
-/*
- * The exported register access functionality.
- */
-static int ab5500_get_chip_id(struct device *dev)
-{
- struct ab5500 *ab = dev_get_drvdata(dev->parent);
-
- return (int)ab->chip_id;
-}
-
-static int ab5500_mask_and_set_register_interruptible(struct device *dev,
- u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
-{
- struct ab5500 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB5500_NUM_BANKS <= bank) ||
- !reg_write_allowed(pdev->id, bank, reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg,
- bitmask, bitvalues);
-}
-
-static int ab5500_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 value)
-{
- return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF,
- value);
-}
-
-static int ab5500_get_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 *value)
-{
- struct ab5500 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB5500_NUM_BANKS <= bank) ||
- !reg_read_allowed(pdev->id, bank, reg))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return ab5500_get_register_interruptible_raw(ab, bank, reg, value);
-}
-
-static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- struct ab5500 *ab;
- struct platform_device *pdev = to_platform_device(dev);
-
- if ((AB5500_NUM_BANKS <= bank) ||
- !page_read_allowed(pdev->id, bank,
- first_reg, (first_reg + numregs - 1)))
- return -EINVAL;
-
- ab = dev_get_drvdata(dev->parent);
- return get_register_page_interruptible(ab, bank, first_reg, regvals,
- numregs);
-}
-
-static int
-ab5500_event_registers_startup_state_get(struct device *dev, u8 *event)
-{
- struct ab5500 *ab;
-
- ab = dev_get_drvdata(dev->parent);
- if (!ab->startup_events_read)
- return -EAGAIN; /* Try again later */
-
- memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG);
- return 0;
-}
-
-static struct abx500_ops ab5500_ops = {
- .get_chip_id = ab5500_get_chip_id,
- .get_register = ab5500_get_register_interruptible,
- .set_register = ab5500_set_register_interruptible,
- .get_register_page = ab5500_get_register_page_interruptible,
- .set_register_page = NULL,
- .mask_and_set_register = ab5500_mask_and_set_register_interruptible,
- .event_registers_startup_state_get =
- ab5500_event_registers_startup_state_get,
- .startup_irq_enabled = NULL,
-};
-
-/*
- * ab5500_setup : Basic set-up, datastructure creation/destruction
- * and I2C interface.This sets up a default config
- * in the AB5500 chip so that it will work as expected.
- * @ab : Pointer to ab5500 structure
- * @settings : Pointer to struct abx500_init_settings
- * @size : Size of init data
- */
-static int __init ab5500_setup(struct ab5500 *ab,
- struct abx500_init_settings *settings, unsigned int size)
-{
- int err = 0;
- int i;
-
- for (i = 0; i < size; i++) {
- err = ab5500_mask_and_set_register_interruptible_raw(ab,
- settings[i].bank,
- settings[i].reg,
- 0xFF, settings[i].setting);
- if (err)
- goto exit_no_setup;
-
- /* If event mask register update the event mask in ab5500 */
- if ((settings[i].bank == AB5500_BANK_IT) &&
- (AB5500_MASK_BASE <= settings[i].reg) &&
- (settings[i].reg <= AB5500_MASK_END)) {
- ab->mask[settings[i].reg - AB5500_MASK_BASE] =
- settings[i].setting;
- }
- }
-exit_no_setup:
- return err;
-}
-
-struct ab_family_id {
- u8 id;
- char *name;
-};
-
-static const struct ab_family_id ids[] __initdata = {
- /* AB5500 */
- {
- .id = AB5500_1_0,
- .name = "1.0"
- },
- {
- .id = AB5500_1_1,
- .name = "1.1"
- },
- /* Terminator */
- {
- .id = 0x00,
- }
-};
-
-static int __init ab5500_probe(struct platform_device *pdev)
-{
- struct ab5500 *ab;
- struct ab5500_platform_data *ab5500_plf_data =
- pdev->dev.platform_data;
- int err;
- int i;
-
- ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL);
- if (!ab) {
- dev_err(&pdev->dev,
- "could not allocate ab5500 device\n");
- return -ENOMEM;
- }
-
- /* Initialize data structure */
- mutex_init(&ab->access_mutex);
- mutex_init(&ab->irq_lock);
- ab->dev = &pdev->dev;
-
- platform_set_drvdata(pdev, ab);
-
- /* Read chip ID register */
- err = ab5500_get_register_interruptible_raw(ab,
- AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
- AB5500_CHIP_ID, &ab->chip_id);
- if (err) {
- dev_err(&pdev->dev, "could not communicate with the analog "
- "baseband chip\n");
- goto exit_no_detect;
- }
-
- for (i = 0; ids[i].id != 0x0; i++) {
- if (ids[i].id == ab->chip_id) {
- snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1,
- "AB5500 %s", ids[i].name);
- break;
- }
- }
- if (ids[i].id == 0x0) {
- dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n",
- ab->chip_id);
- dev_err(&pdev->dev, "driver not started!\n");
- goto exit_no_detect;
- }
-
- /* Clear and mask all interrupts */
- for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) {
- u8 latchreg = AB5500_IT_LATCH0_REG + i;
- u8 maskreg = AB5500_IT_MASK0_REG + i;
- u8 val;
-
- ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT,
- latchreg, &val);
- set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff);
- ab->mask[i] = ab->oldmask[i] = 0xff;
- }
-
- err = abx500_register_ops(&pdev->dev, &ab5500_ops);
- if (err) {
- dev_err(&pdev->dev, "ab5500_register ops error\n");
- goto exit_no_detect;
- }
-
- /* Set up and register the platform devices. */
- for (i = 0; i < AB5500_NUM_DEVICES; i++) {
- ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i];
- ab5500_devs[i].pdata_size =
- sizeof(ab5500_plf_data->dev_data[i]);
- }
-
- err = mfd_add_devices(&pdev->dev, 0, ab5500_devs,
- ARRAY_SIZE(ab5500_devs), NULL,
- ab5500_plf_data->irq.base);
- if (err) {
- dev_err(&pdev->dev, "ab5500_mfd_add_device error\n");
- goto exit_no_detect;
- }
-
- err = ab5500_setup(ab, ab5500_plf_data->init_settings,
- ab5500_plf_data->init_settings_sz);
- if (err) {
- dev_err(&pdev->dev, "ab5500_setup error\n");
- goto exit_no_detect;
- }
-
- ab5500_setup_debugfs(ab);
-
- dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]);
- return 0;
-
-exit_no_detect:
- kfree(ab);
- return err;
-}
-
-static int __exit ab5500_remove(struct platform_device *pdev)
-{
- struct ab5500 *ab = platform_get_drvdata(pdev);
-
- ab5500_remove_debugfs();
- mfd_remove_devices(&pdev->dev);
- kfree(ab);
- return 0;
-}
-
-static struct platform_driver ab5500_driver = {
- .driver = {
- .name = "ab5500-core",
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(ab5500_remove),
-};
-
-static int __init ab5500_core_init(void)
-{
- return platform_driver_probe(&ab5500_driver, ab5500_probe);
-}
-
-static void __exit ab5500_core_exit(void)
-{
- platform_driver_unregister(&ab5500_driver);
-}
-
-subsys_initcall(ab5500_core_init);
-module_exit(ab5500_core_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB5500 core driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Debugfs support for the AB5500 MFD driver
- */
-
-#include <linux/module.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/mfd/abx500.h>
-#include <linux/mfd/abx500/ab5500.h>
-#include <linux/uaccess.h>
-
-#include "ab5500-core.h"
-#include "ab5500-debugfs.h"
-
-static struct ab5500_i2c_ranges ab5500_reg_ranges[AB5500_NUM_BANKS] = {
- [AB5500_BANK_LED] = {
- .bankid = AB5500_BANK_LED,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_ADC] = {
- .bankid = AB5500_BANK_ADC,
- .nranges = 6,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x1F,
- .last = 0x22,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x23,
- .last = 0x24,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x26,
- .last = 0x2D,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x34,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x37,
- .last = 0x57,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x58,
- .last = 0x58,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- [AB5500_BANK_RTC] = {
- .bankid = AB5500_BANK_RTC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x04,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x06,
- .last = 0x0C,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_STARTUP] = {
- .bankid = AB5500_BANK_STARTUP,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1F,
- .last = 0x1F,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x2E,
- .last = 0x2E,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x2F,
- .last = 0x30,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x50,
- .last = 0x51,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x60,
- .last = 0x61,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x66,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8C,
- .last = 0x96,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xAA,
- .last = 0xB4,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xB7,
- .last = 0xBF,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xC1,
- .last = 0xCA,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xD3,
- .last = 0xE0,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_DBI_ECI] = {
- .bankid = AB5500_BANK_DBI_ECI,
- .nranges = 3,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x07,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x10,
- .last = 0x10,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x13,
- .last = 0x13,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_CHG] = {
- .bankid = AB5500_BANK_CHG,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x11,
- .last = 0x11,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x12,
- .last = 0x1B,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- .bankid = AB5500_BANK_FG_BATTCOM_ACC,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x0B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0C,
- .last = 0x10,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_USB] = {
- .bankid = AB5500_BANK_USB,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x83,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x87,
- .last = 0x8A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x8B,
- .last = 0x8B,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x91,
- .last = 0x92,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x93,
- .last = 0x93,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x94,
- .last = 0x94,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xA8,
- .last = 0xB0,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB2,
- .last = 0xB2,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xB4,
- .last = 0xBC,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xBF,
- .last = 0xBF,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0xC1,
- .last = 0xC5,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- [AB5500_BANK_IT] = {
- .bankid = AB5500_BANK_IT,
- .nranges = 4,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x02,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x20,
- .last = 0x36,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x40,
- .last = 0x56,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x60,
- .last = 0x76,
- .perm = AB5500_PERM_RO,
- },
- },
- },
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- .bankid = AB5500_BANK_VDDDIG_IO_I2C_CLK_TST,
- .nranges = 7,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x02,
- .last = 0x02,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x12,
- .last = 0x12,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x30,
- .last = 0x34,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x40,
- .last = 0x44,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x50,
- .last = 0x54,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x60,
- .last = 0x64,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x70,
- .last = 0x74,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP,
- .nranges = 13,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x01,
- .last = 0x01,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x02,
- .last = 0x02,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0D,
- .last = 0x0F,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1C,
- .last = 0x1C,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1E,
- .last = 0x1E,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x20,
- .last = 0x21,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x25,
- .last = 0x25,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x28,
- .last = 0x2A,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x30,
- .last = 0x33,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x40,
- .last = 0x43,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x50,
- .last = 0x53,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x60,
- .last = 0x63,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x70,
- .last = 0x73,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_VIBRA] = {
- .bankid = AB5500_BANK_VIBRA,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x10,
- .last = 0x13,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xFE,
- .last = 0xFE,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- .bankid = AB5500_BANK_AUDIO_HEADSETUSB,
- .nranges = 2,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x48,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0xEB,
- .last = 0xFB,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_SIM_USBSIM] = {
- .bankid = AB5500_BANK_SIM_USBSIM,
- .nranges = 1,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x13,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- },
- },
- [AB5500_BANK_VDENC] = {
- .bankid = AB5500_BANK_VDENC,
- .nranges = 12,
- .range = (struct ab5500_reg_range[]) {
- {
- .first = 0x00,
- .last = 0x08,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x09,
- .last = 0x09,
- .perm = AB5500_PERM_RO,
- },
- {
- .first = 0x0A,
- .last = 0x12,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x15,
- .last = 0x19,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x1B,
- .last = 0x21,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x27,
- .last = 0x2C,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x41,
- .last = 0x41,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x45,
- .last = 0x5B,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x5D,
- .last = 0x5D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x69,
- .last = 0x69,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x6C,
- .last = 0x6D,
- .perm = AB5500_PERM_RW,
- },
- {
- .first = 0x80,
- .last = 0x81,
- .perm = AB5500_PERM_RW,
- },
- },
- },
-};
-
-static int ab5500_registers_print(struct seq_file *s, void *p)
-{
- struct ab5500 *ab = s->private;
- unsigned int i;
- u8 bank = (u8)ab->debug_bank;
-
- seq_printf(s, "ab5500 register values:\n");
- for (bank = 0; bank < AB5500_NUM_BANKS; bank++) {
- seq_printf(s, " bank %u, %s (0x%x):\n", bank,
- bankinfo[bank].name,
- bankinfo[bank].slave_addr);
- for (i = 0; i < ab5500_reg_ranges[bank].nranges; i++) {
- u8 reg;
- int err;
-
- for (reg = ab5500_reg_ranges[bank].range[i].first;
- reg <= ab5500_reg_ranges[bank].range[i].last;
- reg++) {
- u8 value;
-
- err = ab5500_get_register_interruptible_raw(ab,
- bank, reg,
- &value);
- if (err < 0) {
- dev_err(ab->dev, "get_reg failed %d"
- "bank 0x%x reg 0x%x\n",
- err, bank, reg);
- return err;
- }
-
- err = seq_printf(s, "[%d/0x%02X]: 0x%02X\n",
- bank, reg, value);
- if (err < 0) {
- dev_err(ab->dev,
- "seq_printf overflow\n");
- /*
- * Error is not returned here since
- * the output is wanted in any case
- */
- return 0;
- }
- }
- }
- }
- return 0;
-}
-
-static int ab5500_registers_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab5500_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab5500_registers_fops = {
- .open = ab5500_registers_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static int ab5500_bank_print(struct seq_file *s, void *p)
-{
- struct ab5500 *ab = s->private;
-
- seq_printf(s, "%d\n", ab->debug_bank);
- return 0;
-}
-
-static int ab5500_bank_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab5500_bank_print, inode->i_private);
-}
-
-static ssize_t ab5500_bank_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
- unsigned long user_bank;
- int err;
-
- /* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_bank);
- if (err)
- return -EINVAL;
-
- if (user_bank >= AB5500_NUM_BANKS) {
- dev_err(ab->dev,
- "debugfs error input > number of banks\n");
- return -EINVAL;
- }
-
- ab->debug_bank = user_bank;
-
- return buf_size;
-}
-
-static int ab5500_address_print(struct seq_file *s, void *p)
-{
- struct ab5500 *ab = s->private;
-
- seq_printf(s, "0x%02X\n", ab->debug_address);
- return 0;
-}
-
-static int ab5500_address_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab5500_address_print, inode->i_private);
-}
-
-static ssize_t ab5500_address_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
- unsigned long user_address;
- int err;
-
- /* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf) - 1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_address);
- if (err)
- return -EINVAL;
- if (user_address > 0xff) {
- dev_err(ab->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- ab->debug_address = user_address;
- return buf_size;
-}
-
-static int ab5500_val_print(struct seq_file *s, void *p)
-{
- struct ab5500 *ab = s->private;
- int err;
- u8 regvalue;
-
- err = ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err) {
- dev_err(ab->dev, "get_reg failed %d, bank 0x%x"
- ", reg 0x%x\n", err, ab->debug_bank,
- ab->debug_address);
- return -EINVAL;
- }
- seq_printf(s, "0x%02X\n", regvalue);
-
- return 0;
-}
-
-static int ab5500_val_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab5500_val_print, inode->i_private);
-}
-
-static ssize_t ab5500_val_write(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab5500 *ab = ((struct seq_file *)(file->private_data))->private;
- char buf[32];
- int buf_size;
- unsigned long user_val;
- int err;
- u8 regvalue;
-
- /* Get userspace string and assure termination */
- buf_size = min(count, (sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- err = strict_strtoul(buf, 0, &user_val);
- if (err)
- return -EINVAL;
- if (user_val > 0xff) {
- dev_err(ab->dev,
- "debugfs error input > 0xff\n");
- return -EINVAL;
- }
- err = ab5500_mask_and_set_register_interruptible_raw(
- ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, 0xFF, (u8)user_val);
- if (err)
- return -EINVAL;
-
- ab5500_get_register_interruptible_raw(ab, (u8)ab->debug_bank,
- (u8)ab->debug_address, ®value);
- if (err)
- return -EINVAL;
-
- return buf_size;
-}
-
-static const struct file_operations ab5500_bank_fops = {
- .open = ab5500_bank_open,
- .write = ab5500_bank_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab5500_address_fops = {
- .open = ab5500_address_open,
- .write = ab5500_address_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static const struct file_operations ab5500_val_fops = {
- .open = ab5500_val_open,
- .write = ab5500_val_write,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-static struct dentry *ab5500_dir;
-static struct dentry *ab5500_reg_file;
-static struct dentry *ab5500_bank_file;
-static struct dentry *ab5500_address_file;
-static struct dentry *ab5500_val_file;
-
-void __init ab5500_setup_debugfs(struct ab5500 *ab)
-{
- ab->debug_bank = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP;
- ab->debug_address = AB5500_CHIP_ID;
-
- ab5500_dir = debugfs_create_dir("ab5500", NULL);
- if (!ab5500_dir)
- goto exit_no_debugfs;
-
- ab5500_reg_file = debugfs_create_file("all-bank-registers",
- S_IRUGO, ab5500_dir, ab, &ab5500_registers_fops);
- if (!ab5500_reg_file)
- goto exit_destroy_dir;
-
- ab5500_bank_file = debugfs_create_file("register-bank",
- (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_bank_fops);
- if (!ab5500_bank_file)
- goto exit_destroy_reg;
-
- ab5500_address_file = debugfs_create_file("register-address",
- (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_address_fops);
- if (!ab5500_address_file)
- goto exit_destroy_bank;
-
- ab5500_val_file = debugfs_create_file("register-value",
- (S_IRUGO | S_IWUGO), ab5500_dir, ab, &ab5500_val_fops);
- if (!ab5500_val_file)
- goto exit_destroy_address;
-
- return;
-
-exit_destroy_address:
- debugfs_remove(ab5500_address_file);
-exit_destroy_bank:
- debugfs_remove(ab5500_bank_file);
-exit_destroy_reg:
- debugfs_remove(ab5500_reg_file);
-exit_destroy_dir:
- debugfs_remove(ab5500_dir);
-exit_no_debugfs:
- dev_err(ab->dev, "failed to create debugfs entries.\n");
- return;
-}
-
-void __exit ab5500_remove_debugfs(void)
-{
- debugfs_remove(ab5500_val_file);
- debugfs_remove(ab5500_address_file);
- debugfs_remove(ab5500_bank_file);
- debugfs_remove(ab5500_reg_file);
- debugfs_remove(ab5500_dir);
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Debugfs interface to the AB5500 core driver
- */
-
-#ifdef CONFIG_DEBUG_FS
-
-void ab5500_setup_debugfs(struct ab5500 *ab);
-void ab5500_remove_debugfs(void);
-
-#else /* !CONFIG_DEBUG_FS */
-
-static inline void ab5500_setup_debugfs(struct ab5500 *ab)
-{
-}
-
-static inline void ab5500_remove_debugfs(void)
-{
-}
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
- *
- * U5500 PRCM Unit interface driver
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/completion.h>
-#include <linux/irq.h>
-#include <linux/jiffies.h>
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/dbx500-prcmu.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/db5500-regs.h>
-#include "dbx500-prcmu-regs.h"
-
-#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
-#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
-#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1)
-#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2)
-#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3)
-#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4)
-#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5)
-#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6)
-#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7)
-#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8)
-#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9)
-#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa)
-#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb)
-#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc)
-#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd)
-#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe)
-#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf)
-
-/* Req Mailboxes */
-#define PRCM_REQ_MB0 (tcdm_base + 0xFD8)
-#define PRCM_REQ_MB1 (tcdm_base + 0xFCC)
-#define PRCM_REQ_MB2 (tcdm_base + 0xFC4)
-#define PRCM_REQ_MB3 (tcdm_base + 0xFC0)
-#define PRCM_REQ_MB4 (tcdm_base + 0xF98)
-#define PRCM_REQ_MB5 (tcdm_base + 0xF90)
-#define PRCM_REQ_MB6 (tcdm_base + 0xF8C)
-#define PRCM_REQ_MB7 (tcdm_base + 0xF84)
-
-/* Ack Mailboxes */
-#define PRCM_ACK_MB0 (tcdm_base + 0xF38)
-#define PRCM_ACK_MB1 (tcdm_base + 0xF30)
-#define PRCM_ACK_MB2 (tcdm_base + 0xF24)
-#define PRCM_ACK_MB3 (tcdm_base + 0xF20)
-#define PRCM_ACK_MB4 (tcdm_base + 0xF1C)
-#define PRCM_ACK_MB5 (tcdm_base + 0xF14)
-#define PRCM_ACK_MB6 (tcdm_base + 0xF0C)
-#define PRCM_ACK_MB7 (tcdm_base + 0xF08)
-
-enum mb_return_code {
- RC_SUCCESS,
- RC_FAIL,
-};
-
-/* Mailbox 0 headers. */
-enum mb0_header {
- /* request */
- RMB0H_PWR_STATE_TRANS = 1,
- RMB0H_WAKE_UP_CFG,
- RMB0H_RD_WAKE_UP_ACK,
- /* acknowledge */
- AMB0H_WAKE_UP = 1,
-};
-
-/* Mailbox 5 headers. */
-enum mb5_header {
- MB5H_I2C_WRITE = 1,
- MB5H_I2C_READ,
-};
-
-/* Request mailbox 5 fields. */
-#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0)
-#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1)
-#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2)
-#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4)
-
-/* Acknowledge mailbox 5 fields. */
-#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0)
-#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4)
-
-#define NUM_MB 8
-#define MBOX_BIT BIT
-#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
-
-/*
-* Used by MCDE to setup all necessary PRCMU registers
-*/
-#define PRCMU_RESET_DSIPLL 0x00004000
-#define PRCMU_UNCLAMP_DSIPLL 0x00400800
-
-/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/
-#define PRCMU_DSI_CLOCK_SETTING 0x00000128
-/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
-#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135
-#define PRCMU_PLLDSI_FREQ_SETTING 0x00020121
-#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002
-#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000201
-#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101
-
-#define PRCMU_ENABLE_PLLDSI 0x00000001
-#define PRCMU_DISABLE_PLLDSI 0x00000000
-
-#define PRCMU_DSI_RESET_SW 0x00000003
-#define PRCMU_RESOUTN0_PIN 0x00000001
-#define PRCMU_RESOUTN1_PIN 0x00000002
-#define PRCMU_RESOUTN2_PIN 0x00000004
-
-#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
-
-/*
- * mb0_transfer - state needed for mailbox 0 communication.
- * @lock: The transaction lock.
- */
-static struct {
- spinlock_t lock;
-} mb0_transfer;
-
-/*
- * mb5_transfer - state needed for mailbox 5 communication.
- * @lock: The transaction lock.
- * @work: The transaction completion structure.
- * @ack: Reply ("acknowledge") data.
- */
-static struct {
- struct mutex lock;
- struct completion work;
- struct {
- u8 header;
- u8 status;
- u8 value[4];
- } ack;
-} mb5_transfer;
-
-/* PRCMU TCDM base IO address. */
-static __iomem void *tcdm_base;
-
-/**
- * db5500_prcmu_abb_read() - Read register value(s) from the ABB.
- * @slave: The I2C slave address.
- * @reg: The (start) register address.
- * @value: The read out value(s).
- * @size: The number of registers to read.
- *
- * Reads register value(s) from the ABB.
- * @size has to be <= 4.
- */
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
- int r;
-
- if ((size < 1) || (4 < size))
- return -EINVAL;
-
- mutex_lock(&mb5_transfer.lock);
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
- cpu_relax();
- writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
- writeb(reg, PRCM_REQ_MB5_I2C_REG);
- writeb(size, PRCM_REQ_MB5_I2C_SIZE);
- writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER);
-
- writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb5_transfer.work);
-
- r = 0;
- if ((mb5_transfer.ack.header == MB5H_I2C_READ) &&
- (mb5_transfer.ack.status == RC_SUCCESS))
- memcpy(value, mb5_transfer.ack.value, (size_t)size);
- else
- r = -EIO;
-
- mutex_unlock(&mb5_transfer.lock);
-
- return r;
-}
-
-/**
- * db5500_prcmu_abb_write() - Write register value(s) to the ABB.
- * @slave: The I2C slave address.
- * @reg: The (start) register address.
- * @value: The value(s) to write.
- * @size: The number of registers to write.
- *
- * Writes register value(s) to the ABB.
- * @size has to be <= 4.
- */
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
- int r;
-
- if ((size < 1) || (4 < size))
- return -EINVAL;
-
- mutex_lock(&mb5_transfer.lock);
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
- cpu_relax();
- writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
- writeb(reg, PRCM_REQ_MB5_I2C_REG);
- writeb(size, PRCM_REQ_MB5_I2C_SIZE);
- memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size);
- writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER);
-
- writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb5_transfer.work);
-
- if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) &&
- (mb5_transfer.ack.status == RC_SUCCESS))
- r = 0;
- else
- r = -EIO;
-
- mutex_unlock(&mb5_transfer.lock);
-
- return r;
-}
-
-int db5500_prcmu_enable_dsipll(void)
-{
- int i;
-
- /* Enable DSIPLL_RESETN resets */
- writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
- /* Unclamp DSIPLL in/out */
- writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
- /* Set DSI PLL FREQ */
- writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
- writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
- PRCM_DSI_PLLOUT_SEL);
- /* Enable Escape clocks */
- writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
-
- /* Start DSI PLL */
- writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
- /* Reset DSI PLL */
- writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
- for (i = 0; i < 10; i++) {
- if ((readl(PRCM_PLLDSI_LOCKP) &
- PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED)
- break;
- udelay(100);
- }
- /* Release DSIPLL_RESETN */
- writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
- return 0;
-}
-
-int db5500_prcmu_disable_dsipll(void)
-{
- /* Disable dsi pll */
- writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
- /* Disable escapeclock */
- writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
- return 0;
-}
-
-int db5500_prcmu_set_display_clocks(void)
-{
- /* HDMI and TVCLK Should be handled somewhere else */
- /* PLLDIV=8, PLLSW=2, CLKEN=1 */
- writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
- /* PLLDIV=14, PLLSW=2, CLKEN=1 */
- writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
- return 0;
-}
-
-static void ack_dbb_wakeup(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&mb0_transfer.lock, flags);
-
- while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
- cpu_relax();
-
- writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER);
- writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
-
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
-}
-
-static inline void print_unknown_header_warning(u8 n, u8 header)
-{
- pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
- header, n);
-}
-
-static bool read_mailbox_0(void)
-{
- bool r;
- u8 header;
-
- header = readb(PRCM_ACK_MB0_HEADER);
- switch (header) {
- case AMB0H_WAKE_UP:
- r = true;
- break;
- default:
- print_unknown_header_warning(0, header);
- r = false;
- break;
- }
- writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
- return r;
-}
-
-static bool read_mailbox_1(void)
-{
- writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_2(void)
-{
- writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_3(void)
-{
- writel(MBOX_BIT(3), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_4(void)
-{
- writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_5(void)
-{
- u8 header;
-
- header = readb(PRCM_ACK_MB5_HEADER);
- switch (header) {
- case MB5H_I2C_READ:
- memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4);
- case MB5H_I2C_WRITE:
- mb5_transfer.ack.header = header;
- mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE);
- complete(&mb5_transfer.work);
- break;
- default:
- print_unknown_header_warning(5, header);
- break;
- }
- writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_6(void)
-{
- writel(MBOX_BIT(6), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool read_mailbox_7(void)
-{
- writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
- return false;
-}
-
-static bool (* const read_mailbox[NUM_MB])(void) = {
- read_mailbox_0,
- read_mailbox_1,
- read_mailbox_2,
- read_mailbox_3,
- read_mailbox_4,
- read_mailbox_5,
- read_mailbox_6,
- read_mailbox_7
-};
-
-static irqreturn_t prcmu_irq_handler(int irq, void *data)
-{
- u32 bits;
- u8 n;
- irqreturn_t r;
-
- bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
- if (unlikely(!bits))
- return IRQ_NONE;
-
- r = IRQ_HANDLED;
- for (n = 0; bits; n++) {
- if (bits & MBOX_BIT(n)) {
- bits -= MBOX_BIT(n);
- if (read_mailbox[n]())
- r = IRQ_WAKE_THREAD;
- }
- }
- return r;
-}
-
-static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
-{
- ack_dbb_wakeup();
- return IRQ_HANDLED;
-}
-
-void __init db5500_prcmu_early_init(void)
-{
- tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE);
- spin_lock_init(&mb0_transfer.lock);
- mutex_init(&mb5_transfer.lock);
- init_completion(&mb5_transfer.work);
-}
-
-/**
- * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
- *
- */
-int __init db5500_prcmu_init(void)
-{
- int r = 0;
-
- if (ux500_is_svp() || !cpu_is_u5500())
- return -ENODEV;
-
- /* Clean up the mailbox interrupts after pre-kernel code. */
- writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
-
- r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
- prcmu_irq_thread_fn, 0, "prcmu", NULL);
- if (r < 0) {
- pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n");
- return -EBUSY;
- }
- return 0;
-}
-
-arch_initcall(db5500_prcmu_init);
config RTC_DRV_AT91RM9200
tristate "AT91RM9200 or some AT91SAM9 RTC"
- depends on ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
+ depends on ARCH_AT91
help
Driver for the internal RTC (Realtime Clock) module found on
Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
need_transceiver = need_transceiver
|| machine_is_omap_h2() || machine_is_omap_h3();
- if (cpu_is_omap16xx())
- ocpi_enable();
+ /* XXX OMAP16xx only */
+ if (config->ocpi_enable)
+ config->ocpi_enable();
#ifdef CONFIG_USB_OTG
if (need_transceiver) {
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab5500, and ab8500.
+ * ab3100 and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
-#define AB5500_1_0 0x20
-#define AB5500_1_1 0x21
-#define AB5500_2_0 0x24
/*
* AB3100, EVENTA1, A2 and A3 event register flags
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson 2011
- *
- * License Terms: GNU General Public License v2
- */
-#ifndef MFD_AB5500_H
-#define MFD_AB5500_H
-
-struct device;
-
-enum ab5500_devid {
- AB5500_DEVID_ADC,
- AB5500_DEVID_LEDS,
- AB5500_DEVID_POWER,
- AB5500_DEVID_REGULATORS,
- AB5500_DEVID_SIM,
- AB5500_DEVID_RTC,
- AB5500_DEVID_CHARGER,
- AB5500_DEVID_FUELGAUGE,
- AB5500_DEVID_VIBRATOR,
- AB5500_DEVID_CODEC,
- AB5500_DEVID_USB,
- AB5500_DEVID_OTP,
- AB5500_DEVID_VIDEO,
- AB5500_DEVID_DBIECI,
- AB5500_DEVID_ONSWA,
- AB5500_NUM_DEVICES,
-};
-
-enum ab5500_banks {
- AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
- AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
- AB5500_BANK_VDENC = 2,
- AB5500_BANK_SIM_USBSIM = 3,
- AB5500_BANK_LED = 4,
- AB5500_BANK_ADC = 5,
- AB5500_BANK_RTC = 6,
- AB5500_BANK_STARTUP = 7,
- AB5500_BANK_DBI_ECI = 8,
- AB5500_BANK_CHG = 9,
- AB5500_BANK_FG_BATTCOM_ACC = 10,
- AB5500_BANK_USB = 11,
- AB5500_BANK_IT = 12,
- AB5500_BANK_VIBRA = 13,
- AB5500_BANK_AUDIO_HEADSETUSB = 14,
- AB5500_NUM_BANKS = 15,
-};
-
-enum ab5500_banks_addr {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
- AB5500_ADDR_VDENC = 0x06,
- AB5500_ADDR_SIM_USBSIM = 0x04,
- AB5500_ADDR_LED = 0x10,
- AB5500_ADDR_ADC = 0x0A,
- AB5500_ADDR_RTC = 0x0F,
- AB5500_ADDR_STARTUP = 0x03,
- AB5500_ADDR_DBI_ECI = 0x07,
- AB5500_ADDR_CHG = 0x0B,
- AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
- AB5500_ADDR_USB = 0x05,
- AB5500_ADDR_IT = 0x0E,
- AB5500_ADDR_VIBRA = 0x02,
- AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
-};
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB5500_IT_SOURCE0_REG 0x20
-#define AB5500_IT_SOURCE1_REG 0x21
-#define AB5500_IT_SOURCE2_REG 0x22
-#define AB5500_IT_SOURCE3_REG 0x23
-#define AB5500_IT_SOURCE4_REG 0x24
-#define AB5500_IT_SOURCE5_REG 0x25
-#define AB5500_IT_SOURCE6_REG 0x26
-#define AB5500_IT_SOURCE7_REG 0x27
-#define AB5500_IT_SOURCE8_REG 0x28
-#define AB5500_IT_SOURCE9_REG 0x29
-#define AB5500_IT_SOURCE10_REG 0x2A
-#define AB5500_IT_SOURCE11_REG 0x2B
-#define AB5500_IT_SOURCE12_REG 0x2C
-#define AB5500_IT_SOURCE13_REG 0x2D
-#define AB5500_IT_SOURCE14_REG 0x2E
-#define AB5500_IT_SOURCE15_REG 0x2F
-#define AB5500_IT_SOURCE16_REG 0x30
-#define AB5500_IT_SOURCE17_REG 0x31
-#define AB5500_IT_SOURCE18_REG 0x32
-#define AB5500_IT_SOURCE19_REG 0x33
-#define AB5500_IT_SOURCE20_REG 0x34
-#define AB5500_IT_SOURCE21_REG 0x35
-#define AB5500_IT_SOURCE22_REG 0x36
-#define AB5500_IT_SOURCE23_REG 0x37
-
-#define AB5500_NUM_IRQ_REGS 23
-
-/**
- * struct ab5500
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @dev: a pointer to the device struct for this chip driver
- * @ab5500_irq: the analog baseband irq
- * @irq_base: the platform configuration irq base for subdevices
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @irq_lock: a lock to protect the mask
- * @abb_events: a local bit mask of the prcmu wakeup events
- * @event_mask: a local copy of the mask event registers
- * @last_event_mask: a copy of the last event_mask written to hardware
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab5500 {
- struct mutex access_mutex;
- struct device *dev;
- unsigned int ab5500_irq;
- unsigned int irq_base;
- char chip_name[32];
- u8 chip_id;
- struct mutex irq_lock;
- u32 abb_events;
- u8 mask[AB5500_NUM_IRQ_REGS];
- u8 oldmask[AB5500_NUM_IRQ_REGS];
- u8 startup_events[AB5500_NUM_IRQ_REGS];
- bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
- unsigned int debug_bank;
- unsigned int debug_address;
-#endif
-};
-
-struct ab5500_platform_data {
- struct {unsigned int base; unsigned int count; } irq;
- void *dev_data[AB5500_NUM_DEVICES];
- struct abx500_init_settings *init_settings;
- unsigned int init_settings_sz;
- bool pm_power_off;
-};
-
-#endif /* MFD_AB5500_H */
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * U5500 PRCMU API.
- */
-#ifndef __MFD_DB5500_PRCMU_H
-#define __MFD_DB5500_PRCMU_H
-
-static inline int prcmu_resetout(u8 resoutn, u8 state)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
-{
- return 0;
-}
-
-static inline u16 db5500_prcmu_get_reset_code(void)
-{
- return 0;
-}
-
-static inline bool db5500_prcmu_is_ac_wake_requested(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_arm_opp(u8 opp)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_get_arm_opp(void)
-{
- return 0;
-}
-
-static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
-
-static inline void db5500_prcmu_system_reset(u16 reset_code) {}
-
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_set_display_clocks(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_enable_dsipll(void)
-{
- return 0;
-}
-
-#endif /* CONFIG_MFD_DB5500_PRCMU */
-
-#endif /* __MFD_DB5500_PRCMU_H */
#define EPOD_ID_ESRAM34 7
#define NUM_EPOD_ID 8
-/*
- * DB5500 EPODs
- */
-#define DB5500_EPOD_ID_BASE 0x0100
-#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
-#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
-#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
-#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
-#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
-#define DB5500_NUM_EPOD_ID 7
-
/*
* state definition for EPOD (power domain)
* - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
#define EPOD_STATE_ON_CLK_OFF 0x03
#define EPOD_STATE_ON 0x04
-/* DB5500 CLKOUT IDs */
-enum {
- DB5500_CLKOUT0 = 0,
- DB5500_CLKOUT1,
-};
-
-/* DB5500 CLKOUTx sources */
-enum {
- DB5500_CLKOUT_REF_CLK_SEL0,
- DB5500_CLKOUT_RTC_CLK0_SEL0,
- DB5500_CLKOUT_ULP_CLK_SEL0,
- DB5500_CLKOUT_STATIC0,
- DB5500_CLKOUT_REFCLK,
- DB5500_CLKOUT_ULPCLK,
- DB5500_CLKOUT_ARMCLK,
- DB5500_CLKOUT_SYSACC0CLK,
- DB5500_CLKOUT_SOC0PLLCLK,
- DB5500_CLKOUT_SOC1PLLCLK,
- DB5500_CLKOUT_DDRPLLCLK,
- DB5500_CLKOUT_TVCLK,
- DB5500_CLKOUT_IRDACLK,
-};
-
/*
* CLKOUT sources
*/
};
#include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+#if defined(CONFIG_UX500_SOC_DB8500)
#include <mach/id.h>
static inline void __init prcmu_early_init(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_early_init();
- else
- return db8500_prcmu_early_init();
+ return db8500_prcmu_early_init();
}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
{
- if (cpu_is_u5500())
- return db5500_prcmu_set_power_state(state, keep_ulp_clk,
- keep_ap_pll);
- else
- return db8500_prcmu_set_power_state(state, keep_ulp_clk,
- keep_ap_pll);
+ return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
}
static inline u8 prcmu_get_power_state_result(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_power_state_result();
+ return db8500_prcmu_get_power_state_result();
}
static inline int prcmu_gic_decouple(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_decouple();
+ return db8500_prcmu_gic_decouple();
}
static inline int prcmu_gic_recouple(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_recouple();
+ return db8500_prcmu_gic_recouple();
}
static inline bool prcmu_gic_pending_irq(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_pending_irq();
+ return db8500_prcmu_gic_pending_irq();
}
static inline bool prcmu_is_cpu_in_wfi(int cpu)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_is_cpu_in_wfi(cpu);
+ return db8500_prcmu_is_cpu_in_wfi(cpu);
}
static inline int prcmu_copy_gic_settings(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_copy_gic_settings();
+ return db8500_prcmu_copy_gic_settings();
}
static inline bool prcmu_pending_irq(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_pending_irq();
+ return db8500_prcmu_pending_irq();
}
static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_epod(epod_id, epod_state);
+ return db8500_prcmu_set_epod(epod_id, epod_state);
}
static inline void prcmu_enable_wakeups(u32 wakeups)
{
- if (cpu_is_u5500())
- db5500_prcmu_enable_wakeups(wakeups);
- else
- db8500_prcmu_enable_wakeups(wakeups);
+ db8500_prcmu_enable_wakeups(wakeups);
}
static inline void prcmu_disable_wakeups(void)
static inline void prcmu_config_abb_event_readout(u32 abb_events)
{
- if (cpu_is_u5500())
- db5500_prcmu_config_abb_event_readout(abb_events);
- else
- db8500_prcmu_config_abb_event_readout(abb_events);
+ db8500_prcmu_config_abb_event_readout(abb_events);
}
static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
{
- if (cpu_is_u5500())
- db5500_prcmu_get_abb_event_buffer(buf);
- else
- db8500_prcmu_get_abb_event_buffer(buf);
+ db8500_prcmu_get_abb_event_buffer(buf);
}
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
static inline int prcmu_request_clock(u8 clock, bool enable)
{
- if (cpu_is_u5500())
- return db5500_prcmu_request_clock(clock, enable);
- else
- return db8500_prcmu_request_clock(clock, enable);
+ return db8500_prcmu_request_clock(clock, enable);
}
unsigned long prcmu_clock_rate(u8 clock);
static inline int prcmu_set_ddr_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_ddr_opp(opp);
+ return db8500_prcmu_set_ddr_opp(opp);
}
static inline int prcmu_get_ddr_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_ddr_opp();
+ return db8500_prcmu_get_ddr_opp();
}
static inline int prcmu_set_arm_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_arm_opp(opp);
+ return db8500_prcmu_set_arm_opp(opp);
}
static inline int prcmu_get_arm_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_arm_opp();
+ return db8500_prcmu_get_arm_opp();
}
static inline int prcmu_set_ape_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_ape_opp(opp);
+ return db8500_prcmu_set_ape_opp(opp);
}
static inline int prcmu_get_ape_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_ape_opp();
+ return db8500_prcmu_get_ape_opp();
}
static inline void prcmu_system_reset(u16 reset_code)
{
- if (cpu_is_u5500())
- return db5500_prcmu_system_reset(reset_code);
- else
- return db8500_prcmu_system_reset(reset_code);
+ return db8500_prcmu_system_reset(reset_code);
}
static inline u16 prcmu_get_reset_code(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_get_reset_code();
- else
- return db8500_prcmu_get_reset_code();
+ return db8500_prcmu_get_reset_code();
}
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
static inline void prcmu_modem_reset(void)
{
- if (cpu_is_u5500())
- return;
- else
- return db8500_prcmu_modem_reset();
+ return db8500_prcmu_modem_reset();
}
static inline bool prcmu_is_ac_wake_requested(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_is_ac_wake_requested();
- else
- return db8500_prcmu_is_ac_wake_requested();
+ return db8500_prcmu_is_ac_wake_requested();
}
static inline int prcmu_set_display_clocks(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_set_display_clocks();
- else
- return db8500_prcmu_set_display_clocks();
+ return db8500_prcmu_set_display_clocks();
}
static inline int prcmu_disable_dsipll(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_disable_dsipll();
- else
- return db8500_prcmu_disable_dsipll();
+ return db8500_prcmu_disable_dsipll();
}
static inline int prcmu_enable_dsipll(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_enable_dsipll();
- else
- return db8500_prcmu_enable_dsipll();
+ return db8500_prcmu_enable_dsipll();
}
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_esram0_deep_sleep(state);
+ return db8500_prcmu_config_esram0_deep_sleep(state);
}
static inline int prcmu_config_hotdog(u8 threshold)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_hotdog(threshold);
+ return db8500_prcmu_config_hotdog(threshold);
}
static inline int prcmu_config_hotmon(u8 low, u8 high)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_hotmon(low, high);
+ return db8500_prcmu_config_hotmon(low, high);
}
static inline int prcmu_start_temp_sense(u16 cycles32k)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_start_temp_sense(cycles32k);
+ return db8500_prcmu_start_temp_sense(cycles32k);
}
static inline int prcmu_stop_temp_sense(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_stop_temp_sense();
+ return db8500_prcmu_stop_temp_sense();
}
static inline u32 prcmu_read(unsigned int reg)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_read(reg);
+ return db8500_prcmu_read(reg);
}
static inline void prcmu_write(unsigned int reg, u32 value)
{
- if (cpu_is_u5500())
- return;
- else
- db8500_prcmu_write(reg, value);
+ db8500_prcmu_write(reg, value);
}
static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
{
- if (cpu_is_u5500())
- return;
- else
- db8500_prcmu_write_masked(reg, mask, value);
+ db8500_prcmu_write_masked(reg, mask, value);
}
static inline int prcmu_enable_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_enable_a9wdog(id);
+ return db8500_prcmu_enable_a9wdog(id);
}
static inline int prcmu_disable_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_disable_a9wdog(id);
+ return db8500_prcmu_disable_a9wdog(id);
}
static inline int prcmu_kick_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_kick_a9wdog(id);
+ return db8500_prcmu_kick_a9wdog(id);
}
static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_load_a9wdog(id, timeout);
+ return db8500_prcmu_load_a9wdog(id, timeout);
}
static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+ return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
}
#else
prcmu_write_masked(reg, bits, 0);
}
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+#if defined(CONFIG_UX500_SOC_DB8500)
/**
* prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
projects / firefly-linux-kernel-4.4.55.git / commitdiff