ARM: dts: AM33XX: Add LCDC info into am335x-evm
authorBenoit Parrot <bparrot@ti.com>
Thu, 8 Aug 2013 23:28:14 +0000 (18:28 -0500)
committerBenoit Cousson <bcousson@baylibre.com>
Fri, 11 Oct 2013 19:06:42 +0000 (21:06 +0200)
Add LCDC device node in DT for am33xx
Add LCDC and Panel info in DT for am335x-evm

Changes:
- remove redundant/unnecessary SoC specific setting in the board dts
- resolved conflicts on for_3.13/dts

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
arch/arm/boot/dts/am335x-evm.dts
arch/arm/boot/dts/am33xx.dtsi

index ff834add842db250140dd547bf66a1e12fa6bc1e..eabacf9b8c3146036f2b930bd084fef832233b67 100644 (file)
                brightness-levels = <0 51 53 56 62 75 101 152 255>;
                default-brightness-level = <8>;
        };
+
+       panel {
+               compatible = "ti,tilcdc,panel";
+               status = "okay";
+               pinctrl-names = "default";
+               pinctrl-0 = <&lcd_pins_s0>;
+               panel-info {
+                       ac-bias           = <255>;
+                       ac-bias-intrpt    = <0>;
+                       dma-burst-sz      = <16>;
+                       bpp               = <32>;
+                       fdd               = <0x80>;
+                       sync-edge         = <0>;
+                       sync-ctrl         = <1>;
+                       raster-order      = <0>;
+                       fifo-th           = <0>;
+               };
+
+               display-timings {
+                       800x480p62 {
+                               clock-frequency = <30000000>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hfront-porch = <39>;
+                               hback-porch = <39>;
+                               hsync-len = <47>;
+                               vback-porch = <29>;
+                               vfront-porch = <13>;
+                               vsync-len = <2>;
+                               hsync-active = <1>;
+                               vsync-active = <1>;
+                       };
+               };
+       };
 };
 
 &am33xx_pinmux {
                        0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
                >;
        };
+
+       lcd_pins_s0: lcd_pins_s0 {
+               pinctrl-single,pins = <
+                       0x20 0x01       /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+                       0x24 0x01       /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+                       0x28 0x01       /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+                       0x2c 0x01       /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+                       0x30 0x01       /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+                       0x34 0x01       /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+                       0x38 0x01       /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+                       0x3c 0x01       /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+                       0xa0 0x00       /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+                       0xa4 0x00       /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+                       0xa8 0x00       /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+                       0xac 0x00       /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+                       0xb0 0x00       /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+                       0xb4 0x00       /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+                       0xb8 0x00       /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+                       0xbc 0x00       /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+                       0xc0 0x00       /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+                       0xc4 0x00       /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+                       0xc8 0x00       /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+                       0xcc 0x00       /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+                       0xd0 0x00       /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+                       0xd4 0x00       /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+                       0xd8 0x00       /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+                       0xdc 0x00       /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+                       0xe0 0x00       /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+                       0xe4 0x00       /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+                       0xe8 0x00       /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+                       0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+               >;
+       };
 };
 
 &uart0 {
        };
 };
 
+&lcdc {
+       status = "okay";
+};
+
 &elm {
        status = "okay";
 };
index c87bf4b8acf2423e99228abc3bbcac58f13fac92..7db3c81d1563f398a629603b5ae63c3e805eab11 100644 (file)
                        status = "disabled";
                };
 
+               lcdc: lcdc@4830e000 {
+                       compatible = "ti,am33xx-tilcdc";
+                       reg = <0x4830e000 0x1000>;
+                       interrupt-parent = <&intc>;
+                       interrupts = <36>;
+                       ti,hwmods = "lcdc";
+                       status = "disabled";
+               };
+
                tscadc: tscadc@44e0d000 {
                        compatible = "ti,am3359-tscadc";
                        reg = <0x44e0d000 0x1000>;