ARM: at91/dt: kizbox: rename to at91-kizbox
authorGaël PORTAY <g.portay@overkiz.com>
Thu, 30 Apr 2015 07:33:32 +0000 (09:33 +0200)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Thu, 30 Apr 2015 07:53:17 +0000 (09:53 +0200)
Rename to match AT91 naming convention.

Signed-off-by: Gaël PORTAY <g.portay@overkiz.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/at91-kizbox.dts [new file with mode: 0644]
arch/arm/boot/dts/kizbox.dts [deleted file]

index 86217db2937ab331666b710c1bd639c68caad516..640c913924cca14ba9e78d4b7ca5677056fec9b7 100644 (file)
@@ -20,9 +20,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
        tny_a9263.dtb \
        usb_a9263.dtb \
        at91-foxg20.dtb \
+       at91-kizbox.dtb \
        at91sam9g20ek.dtb \
        at91sam9g20ek_2mmc.dtb \
-       kizbox.dtb \
        tny_a9g20.dtb \
        usb_a9g20.dtb \
        usb_a9g20_lpw.dtb \
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
new file mode 100644 (file)
index 0000000..e07afae
--- /dev/null
@@ -0,0 +1,150 @@
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+
+       model = "Overkiz kizbox";
+       compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+       chosen {
+               bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
+       };
+
+       memory {
+               reg = <0x20000000 0x2000000>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <18432000>;
+               };
+
+               main_xtal {
+                       clock-frequency = <18432000>;
+               };
+       };
+
+       ahb {
+               apb {
+                       dbgu: serial@fffff200 {
+                               status = "okay";
+                       };
+
+                       usart0: serial@fffb0000 {
+                               status = "okay";
+                       };
+
+                       usart1: serial@fffb4000 {
+                               status = "okay";
+                       };
+
+                       macb0: ethernet@fffc4000 {
+                               phy-mode = "mii";
+                               pinctrl-0 = <&pinctrl_macb_rmii
+                                            &pinctrl_macb_rmii_mii_alt>;
+                               status = "okay";
+                       };
+
+                       watchdog@fffffd40 {
+                               timeout-sec = <15>;
+                               atmel,max-heartbeat-sec = <16>;
+                               atmel,min-heartbeat-sec = <0>;
+                               status = "okay";
+                       };
+               };
+
+               nand0: nand@40000000 {
+                       nand-bus-width = <8>;
+                       nand-ecc-mode = "soft";
+                       status = "okay";
+
+                       bootloaderkernel@0 {
+                               label = "bootloader-kernel";
+                               reg = <0x0 0xc0000>;
+                       };
+
+                       ubi@c0000 {
+                               label = "ubi";
+                               reg = <0xc0000 0x7f40000>;
+                       };
+
+               };
+
+               usb0: ohci@00500000 {
+                       num-ports = <1>;
+                       status = "okay";
+               };
+       };
+
+       i2c@0 {
+               status = "okay";
+
+               pcf8563@51 {
+                       /* nxp pcf8563 rtc */
+                       compatible = "nxp,pcf8563";
+                       reg = <0x51>;
+               };
+
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led1g {
+                       label = "led1:green";
+                       gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               led1r {
+                       label = "led1:red";
+                       gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+
+               led2g {
+                       label = "led2:green";
+                       gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+                       default-state = "on";
+               };
+
+               led2r {
+                       label = "led2:red";
+                       gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "none";
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x100>;
+                       gpio-key,wakeup;
+               };
+
+               mode {
+                       label = "mode";
+                       gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+                       linux,code = <0x101>;
+                       gpio-key,wakeup;
+               };
+       };
+};
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
deleted file mode 100644 (file)
index e83e4f9..0000000
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
-       model = "Overkiz kizbox";
-       compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-       chosen {
-               bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
-       };
-
-       memory {
-               reg = <0x20000000 0x2000000>;
-       };
-
-       clocks {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-
-               main_clock: clock@0 {
-                       compatible = "atmel,osc", "fixed-clock";
-                       clock-frequency = <18432000>;
-               };
-
-               main_xtal {
-                       clock-frequency = <18432000>;
-               };
-       };
-
-       ahb {
-               apb {
-                       dbgu: serial@fffff200 {
-                               status = "okay";
-                       };
-
-                       usart0: serial@fffb0000 {
-                               status = "okay";
-                       };
-
-                       usart1: serial@fffb4000 {
-                               status = "okay";
-                       };
-
-                       macb0: ethernet@fffc4000 {
-                               phy-mode = "mii";
-                               pinctrl-0 = <&pinctrl_macb_rmii
-                                            &pinctrl_macb_rmii_mii_alt>;
-                               status = "okay";
-                       };
-
-                       watchdog@fffffd40 {
-                               timeout-sec = <15>;
-                               atmel,max-heartbeat-sec = <16>;
-                               atmel,min-heartbeat-sec = <0>;
-                               status = "okay";
-                       };
-               };
-
-               nand0: nand@40000000 {
-                       nand-bus-width = <8>;
-                       nand-ecc-mode = "soft";
-                       status = "okay";
-
-                       bootloaderkernel@0 {
-                               label = "bootloader-kernel";
-                               reg = <0x0 0xc0000>;
-                       };
-
-                       ubi@c0000 {
-                               label = "ubi";
-                               reg = <0xc0000 0x7f40000>;
-                       };
-
-               };
-
-               usb0: ohci@00500000 {
-                       num-ports = <1>;
-                       status = "okay";
-               };
-       };
-
-       i2c@0 {
-               status = "okay";
-
-               pcf8563@51 {
-                       /* nxp pcf8563 rtc */
-                       compatible = "nxp,pcf8563";
-                       reg = <0x51>;
-               };
-
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led1g {
-                       label = "led1:green";
-                       gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "none";
-               };
-
-               led1r {
-                       label = "led1:red";
-                       gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "none";
-               };
-
-               led2g {
-                       label = "led2:green";
-                       gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "none";
-                       default-state = "on";
-               };
-
-               led2r {
-                       label = "led2:red";
-                       gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "none";
-               };
-       };
-
-       gpio_keys {
-               compatible = "gpio-keys";
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x100>;
-                       gpio-key,wakeup;
-               };
-
-               mode {
-                       label = "mode";
-                       gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-                       linux,code = <0x101>;
-                       gpio-key,wakeup;
-               };
-       };
-};