xhci: Setup array of USB 2.0 and USB 3.0 ports.
authorSarah Sharp <sarah.a.sharp@linux.intel.com>
Tue, 26 Oct 2010 23:47:13 +0000 (16:47 -0700)
committerSarah Sharp <sarah.a.sharp@linux.intel.com>
Sat, 20 Nov 2010 00:23:18 +0000 (16:23 -0800)
An xHCI host controller contains USB 2.0 and USB 3.0 ports, which can
occur in any order in the PORTSC registers.  We cannot read the port speed
bits in the PORTSC registers at init time to determine the port speed,
since those bits are only valid when a USB device is plugged into the
port.

Instead, we read the "Supported Protocol Capability" registers in the xHC
Extended Capabilities space.  Those describe the protocol, port offset in
the PORTSC registers, and port count.  We use those registers to create
two arrays of pointers to the PORTSC registers, one for USB 3.0 ports, and
another for USB 2.0 ports.  A third array keeps track of the port protocol
major revision, and is indexed with the internal xHCI port number.

This commit is a bit big, but it should be queued for stable because the "Don't
let the USB core disable SuperSpeed ports" patch depends on it.  There is no
other way to determine which ports are SuperSpeed ports without this patch.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Cc: stable@kernel.org
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci.h

index d178761c39817ec71c0b9461e69a01eb6856e473..0fae58ef8afe7c43b145074fd8cbb1fe7b30e248 100644 (file)
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
        xhci->dcbaa = NULL;
 
        scratchpad_free(xhci);
+
+       xhci->num_usb2_ports = 0;
+       xhci->num_usb3_ports = 0;
+       kfree(xhci->usb2_ports);
+       kfree(xhci->usb3_ports);
+       kfree(xhci->port_array);
+
        xhci->page_size = 0;
        xhci->page_shift = 0;
        xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
                        &xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+               u32 __iomem *addr, u8 major_revision)
+{
+       u32 temp, port_offset, port_count;
+       int i;
+
+       if (major_revision > 0x03) {
+               xhci_warn(xhci, "Ignoring unknown port speed, "
+                               "Ext Cap %p, revision = 0x%x\n",
+                               addr, major_revision);
+               /* Ignoring port protocol we can't understand. FIXME */
+               return;
+       }
+
+       /* Port offset and count in the third dword, see section 7.2 */
+       temp = xhci_readl(xhci, addr + 2);
+       port_offset = XHCI_EXT_PORT_OFF(temp);
+       port_count = XHCI_EXT_PORT_COUNT(temp);
+       xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+                       "count = %u, revision = 0x%x\n",
+                       addr, port_offset, port_count, major_revision);
+       /* Port count includes the current port offset */
+       if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+               /* WTF? "Valid values are ‘1’ to MaxPorts" */
+               return;
+       port_offset--;
+       for (i = port_offset; i < (port_offset + port_count); i++) {
+               /* Duplicate entry.  Ignore the port if the revisions differ. */
+               if (xhci->port_array[i] != 0) {
+                       xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+                                       " port %u\n", addr, i);
+                       xhci_warn(xhci, "Port was marked as USB %u, "
+                                       "duplicated as USB %u\n",
+                                       xhci->port_array[i], major_revision);
+                       /* Only adjust the roothub port counts if we haven't
+                        * found a similar duplicate.
+                        */
+                       if (xhci->port_array[i] != major_revision &&
+                               xhci->port_array[i] != (u8) -1) {
+                               if (xhci->port_array[i] == 0x03)
+                                       xhci->num_usb3_ports--;
+                               else
+                                       xhci->num_usb2_ports--;
+                               xhci->port_array[i] = (u8) -1;
+                       }
+                       /* FIXME: Should we disable the port? */
+               }
+               xhci->port_array[i] = major_revision;
+               if (major_revision == 0x03)
+                       xhci->num_usb3_ports++;
+               else
+                       xhci->num_usb2_ports++;
+       }
+       /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+       u32 __iomem *addr;
+       u32 offset;
+       unsigned int num_ports;
+       int i, port_index;
+
+       addr = &xhci->cap_regs->hcc_params;
+       offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+       if (offset == 0) {
+               xhci_err(xhci, "No Extended Capability registers, "
+                               "unable to set up roothub.\n");
+               return -ENODEV;
+       }
+
+       num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+       xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+       if (!xhci->port_array)
+               return -ENOMEM;
+
+       /*
+        * For whatever reason, the first capability offset is from the
+        * capability register base, not from the HCCPARAMS register.
+        * See section 5.3.6 for offset calculation.
+        */
+       addr = &xhci->cap_regs->hc_capbase + offset;
+       while (1) {
+               u32 cap_id;
+
+               cap_id = xhci_readl(xhci, addr);
+               if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+                       xhci_add_in_port(xhci, num_ports, addr,
+                                       (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+               offset = XHCI_EXT_CAPS_NEXT(cap_id);
+               if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+                               == num_ports)
+                       break;
+               /*
+                * Once you're into the Extended Capabilities, the offset is
+                * always relative to the register holding the offset.
+                */
+               addr += offset;
+       }
+
+       if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+               xhci_warn(xhci, "No ports on the roothubs?\n");
+               return -ENODEV;
+       }
+       xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+                       xhci->num_usb2_ports, xhci->num_usb3_ports);
+       /*
+        * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+        * Not sure how the USB core will handle a hub with no ports...
+        */
+       if (xhci->num_usb2_ports) {
+               xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+                               xhci->num_usb2_ports, flags);
+               if (!xhci->usb2_ports)
+                       return -ENOMEM;
+
+               port_index = 0;
+               for (i = 0; i < num_ports; i++)
+                       if (xhci->port_array[i] != 0x03) {
+                               xhci->usb2_ports[port_index] =
+                                       &xhci->op_regs->port_status_base +
+                                       NUM_PORT_REGS*i;
+                               xhci_dbg(xhci, "USB 2.0 port at index %u, "
+                                               "addr = %p\n", i,
+                                               xhci->usb2_ports[port_index]);
+                               port_index++;
+                       }
+       }
+       if (xhci->num_usb3_ports) {
+               xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+                               xhci->num_usb3_ports, flags);
+               if (!xhci->usb3_ports)
+                       return -ENOMEM;
+
+               port_index = 0;
+               for (i = 0; i < num_ports; i++)
+                       if (xhci->port_array[i] == 0x03) {
+                               xhci->usb3_ports[port_index] =
+                                       &xhci->op_regs->port_status_base +
+                                       NUM_PORT_REGS*i;
+                               xhci_dbg(xhci, "USB 3.0 port at index %u, "
+                                               "addr = %p\n", i,
+                                               xhci->usb3_ports[port_index]);
+                               port_index++;
+                       }
+       }
+       return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
        if (scratchpad_alloc(xhci, flags))
                goto fail;
+       if (xhci_setup_port_arrays(xhci, flags))
+               goto fail;
 
        return 0;
 
index 85e65647d44518cf3c3bbf0873816b344b90cf53..170c367112d2e8046f39ec596703c126f2050f84 100644 (file)
@@ -453,6 +453,24 @@ struct xhci_doorbell_array {
 #define STREAM_ID_TO_DB(p)     (((p) & 0xffff) << 16)
 
 
+/**
+ * struct xhci_protocol_caps
+ * @revision:          major revision, minor revision, capability ID,
+ *                     and next capability pointer.
+ * @name_string:       Four ASCII characters to say which spec this xHC
+ *                     follows, typically "USB ".
+ * @port_info:         Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+       u32     revision;
+       u32     name_string;
+       u32     port_info;
+};
+
+#define        XHCI_EXT_PORT_MAJOR(x)  (((x) >> 24) & 0xff)
+#define        XHCI_EXT_PORT_OFF(x)    ((x) & 0xff)
+#define        XHCI_EXT_PORT_COUNT(x)  (((x) >> 8) & 0xff)
+
 /**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
        u32                     suspended_ports[8];     /* which ports are
                                                           suspended */
        unsigned long           resume_done[MAX_HC_PORTS];
+       /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+       u8                      *port_array;
+       /* Array of pointers to USB 3.0 PORTSC registers */
+       u32 __iomem             **usb3_ports;
+       unsigned int            num_usb3_ports;
+       /* Array of pointers to USB 2.0 PORTSC registers */
+       u32 __iomem             **usb2_ports;
+       unsigned int            num_usb2_ports;
 };
 
 /* For testing purposes */