+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_ASHMEM=y
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_RK30=y
-# CONFIG_DDR_TEST is not set
-CONFIG_ARCH_RK3066B=y
-CONFIG_MACH_RK3066B_M701=y
-CONFIG_FIQ_DEBUGGER=y
-CONFIG_FIQ_DEBUGGER_NO_SLEEP=y
-CONFIG_FIQ_DEBUGGER_CONSOLE=y
-CONFIG_FIQ_DEBUGGER_CONSOLE_DEFAULT_ENABLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_NR_CPUS=2
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_COMPACTION=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_WAKELOCK=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_DEBUG=y
-CONFIG_SUSPEND_TIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NF_CONNTRACK_H323=y
-CONFIG_NF_CONNTRACK_IRC=y
-CONFIG_NF_CONNTRACK_NETBIOS_NS=y
-CONFIG_NF_CONNTRACK_PPTP=y
-CONFIG_NF_CONNTRACK_SANE=y
-CONFIG_NF_CONNTRACK_SIP=y
-CONFIG_NF_CONNTRACK_TFTP=y
-CONFIG_NF_CT_NETLINK=y
-CONFIG_NETFILTER_TPROXY=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_TARGET_NFLOG=y
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
-CONFIG_NETFILTER_XT_TARGET_TPROXY=y
-CONFIG_NETFILTER_XT_TARGET_TRACE=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
-CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-CONFIG_NETFILTER_XT_MATCH_MAC=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_POLICY=y
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
-CONFIG_NETFILTER_XT_MATCH_QTAGUID=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA2_LOG=y
-CONFIG_NETFILTER_XT_MATCH_SOCKET=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
-CONFIG_NETFILTER_XT_MATCH_STRING=y
-CONFIG_NETFILTER_XT_MATCH_TIME=y
-CONFIG_NETFILTER_XT_MATCH_U32=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_AH=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-CONFIG_NF_CONNTRACK_IPV6=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_TARGET_LOG=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-CONFIG_IP6_NF_TARGET_REJECT_SKERR=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_IGMP_SNOOPING is not set
-CONFIG_PHONET=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_CLS_U32=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_U32=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM4325=y
-CONFIG_BT_AUTOSLEEP=y
-CONFIG_RFKILL=y
-CONFIG_RFKILL_RK=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_RKNAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_MISC_DEVICES=y
-CONFIG_UID_STAT=y
-CONFIG_APANIC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN_80211=y
-CONFIG_RKWIFI=y
-CONFIG_USB_USBNET=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOLAC=y
-CONFIG_PPPOPNS=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYRESET=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_JOYSTICK_XPAD=y
-CONFIG_JOYSTICK_XPAD_FF=y
-CONFIG_JOYSTICK_XPAD_LEDS=y
-CONFIG_INPUT_TABLET=y
-CONFIG_TABLET_USB_ACECAD=y
-CONFIG_TABLET_USB_AIPTEK=y
-CONFIG_TABLET_USB_GTCO=y
-CONFIG_TABLET_USB_HANWANG=y
-CONFIG_TABLET_USB_KBTAB=y
-CONFIG_TABLET_USB_WACOM=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_FT5306=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_KEYCHORD=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_COMPASS_AK8975=y
-CONFIG_GS_MMA8452=y
-CONFIG_GS_LIS3DH=y
-CONFIG_GYRO_L3G4200D=y
-CONFIG_LS_CM3217=y
-CONFIG_SENSOR_DEVICE=y
-CONFIG_GSENSOR_DEVICE=y
-CONFIG_GS_KXTIK=y
-CONFIG_COMPASS_DEVICE=y
-CONFIG_GYROSCOPE_DEVICE=y
-CONFIG_LIGHT_DEVICE=y
-CONFIG_LS_AL3006=y
-CONFIG_LS_STK3171=y
-CONFIG_PROXIMITY_DEVICE=y
-CONFIG_PS_AL3006=y
-CONFIG_PS_STK3171=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_RK29=y
-CONFIG_UART0_RK29=y
-CONFIG_UART0_CTS_RTS_RK29=y
-CONFIG_UART3_RK29=y
-CONFIG_UART3_CTS_RTS_RK29=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-# CONFIG_I2C_COMPAT is not set
-CONFIG_I2C0_CONTROLLER_RK30=y
-CONFIG_I2C1_CONTROLLER_RK30=y
-CONFIG_I2C2_CONTROLLER_RK30=y
-CONFIG_I2C3_CONTROLLER_RK30=y
-CONFIG_I2C4_CONTROLLER_RK30=y
-CONFIG_GPIO_WM831X=y
-CONFIG_EXPANDED_GPIO_NUM=0
-CONFIG_EXPANDED_GPIO_IRQ_NUM=0
-CONFIG_SPI_FPGA_GPIO_NUM=0
-CONFIG_SPI_FPGA_GPIO_IRQ_NUM=0
-CONFIG_POWER_SUPPLY=y
-CONFIG_TEST_POWER=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_WM831X_I2C=y
-CONFIG_MFD_TPS65090=y
-CONFIG_MFD_RK610=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_WM831X=y
-CONFIG_RK30_PWM_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2659=y
-CONFIG_SOC_CAMERA_OV5642=y
-CONFIG_VIDEO_RK29=y
-CONFIG_VIDEO_RK29_CAMMEM_ION=y
-CONFIG_ION=y
-CONFIG_ION_ROCKCHIP=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_DISPLAY_SUPPORT=y
-CONFIG_LCD_B101EW05=y
-CONFIG_FB_ROCKCHIP=y
-CONFIG_LCDC_RK31=y
-CONFIG_LCDC1_RK31=y
-CONFIG_RGA_RK30=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_RK29_SOC=y
-CONFIG_SND_RK29_SOC_I2S_2CH=y
-CONFIG_SND_I2S_DMA_EVENT_STATIC=y
-CONFIG_SND_RK29_SOC_RK610=y
-CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_ACRUX=y
-CONFIG_HID_ACRUX_FF=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_EMS_FF=y
-CONFIG_HID_ELECOM=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_KEYTOUCH=y
-CONFIG_HID_KYE=y
-CONFIG_HID_UCLOGIC=y
-CONFIG_HID_WALTOP=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_KENSINGTON=y
-CONFIG_HID_LCPOWER=y
-CONFIG_HID_LOGITECH=y
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_LOGIG940_FF=y
-CONFIG_LOGIWII_FF=y
-CONFIG_HID_MAGICMOUSE=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_MULTITOUCH=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_ORTEK=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_PICOLCD=y
-CONFIG_HID_QUANTA=y
-CONFIG_HID_ROCCAT_ARVO=y
-CONFIG_HID_ROCCAT_KONE=y
-CONFIG_HID_ROCCAT_KONEPLUS=y
-CONFIG_HID_ROCCAT_KOVAPLUS=y
-CONFIG_HID_ROCCAT_PYRA=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_WACOM=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_ZEROPLUS_FF=y
-CONFIG_HID_ZYDACRON=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_OPTION=y
-CONFIG_USB_GADGET=y
-CONFIG_USB20_HOST=y
-CONFIG_USB20_OTG=y
-CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_EMBEDDED_SDIO=y
-CONFIG_MMC_PARANOID_SD_INIT=y
-CONFIG_SDMMC_RK29=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_SWITCH=y
-CONFIG_SWITCH_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_WM831X=y
-CONFIG_TPS65910_RTC=y
-CONFIG_STAGING=y
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_TIMED_GPIO=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-# CONFIG_CMMB is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-# CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHEDSTATS=y
-CONFIG_SLUB_DEBUG_ON=y
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
-CONFIG_ENABLE_DEFAULT_TRACERS=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_TWOFISH=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
#ifndef __ASM_ARCH_CAMERA_RK29_H_
#define __ASM_ARCH_CAMERA_RK29_H_
-#define RK29_CAM_DRV_NAME "rk29-camera"
+#define RK29_CAM_DRV_NAME "rk-camera-rk29"
#include <plat/rk_camera.h>
#define TPS65910_HOST_IRQ RK2928_PIN1_PB2
#include "board-rk2928-a720-tps65910.c"
#endif
-#ifdef CONFIG_REGULATOR_ACT8931
-#include "board-rk2928-sdk-act8931.c"
-#endif
-
static struct i2c_board_info __initdata i2c0_info[] = {
#if defined (CONFIG_MFD_TPS65910)
{
.platform_data = &tps65910_data,
},
#endif
-#if defined (CONFIG_REGULATOR_ACT8931)
- {
- .type = "act8931",
- .addr = 0x5b,
- .flags = 0,
- .platform_data=&act8931_data,
- },
-#endif
-
};
#endif
#ifdef CONFIG_I2C1_RK30
+++ /dev/null
-#include <linux/regulator/machine.h>
-#include <linux/regulator/act8931.h>
-#include <mach/sram.h>
-#include <linux/platform_device.h>
-
-#include <mach/gpio.h>
-#include <mach/iomux.h>
-
-#define gpio_readl(offset) readl_relaxed(RK2928_GPIO3_BASE + offset)
-#define gpio_writel(v, offset) do { writel_relaxed(v, RK2928_GPIO3_BASE + offset); dsb(); } while (0)
-
-#define GPIO_SWPORTA_DR 0x0000
-#define GPIO_SWPORTA_DDR 0x0004
-
-#define GPIO3_D2_OUTPUT (1<<26)
-#define GPIO3_D2_OUTPUT_HIGH (1<<26)
-#define GPIO3_D2_OUTPUT_LOW (~(1<<26))
-
-#ifdef CONFIG_REGULATOR_ACT8931
-#define PMU_POWER_SLEEP RK2928_PIN3_PD2
-extern int platform_device_register(struct platform_device *pdev);
-
-int act8931_pre_init(struct act8931 *act8931){
-
- int val = 0;
- int i = 0;
- int err = -1;
-
- printk("%s,line=%d\n", __func__,__LINE__);
-
-
-}
-int act8931_set_init(struct act8931 *act8931)
-{
- struct regulator *dcdc;
- struct regulator *ldo;
- printk("%s,line=%d\n", __func__,__LINE__);
-
- #ifdef CONFIG_RK30_PWM_REGULATOR
- platform_device_register(&pwm_regulator_device[0]);
- #endif
-
- ldo = regulator_get(NULL, "act_ldo1"); //vcc28_cif
- regulator_set_voltage(ldo, 2800000, 2800000);
- regulator_enable(ldo);
- printk("%s set ldo1 vcc28_cif=%dmV end\n", __func__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- ldo = regulator_get(NULL, "act_ldo2"); // vcc18_cif
- regulator_set_voltage(ldo, 1800000, 1800000);
- regulator_enable(ldo);
- printk("%s set ldo2 vcc18_cif=%dmV end\n", __func__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- ldo = regulator_get(NULL, "act_ldo3"); // vcca_30
- regulator_set_voltage(ldo, 3000000, 3000000);
- regulator_enable(ldo);
- printk("%s set ldo3 vcca_30=%dmV end\n", __func__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- ldo = regulator_get(NULL, "act_ldo4"); //vcc_lcd
- regulator_set_voltage(ldo, 3300000, 3300000);
- regulator_enable(ldo);
- printk("%s set ldo4 vcc_lcd=%dmV end\n", __func__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- dcdc = regulator_get(NULL, "act_dcdc1"); //vcc_io
- regulator_set_voltage(dcdc, 3000000, 3000000);
- regulator_enable(dcdc);
- printk("%s set dcdc1 vcc_io=%dmV end\n", __func__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
- dcdc = regulator_get(NULL, "act_dcdc2"); //vcc_ddr
- regulator_set_voltage(dcdc, 1500000, 1500000); // 1.5*4/5 = 1.2 and Vout=1.5v
- regulator_enable(dcdc);
- printk("%s set dcdc2 vcc_ddr=%dmV end\n", __func__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
- dcdc = regulator_get(NULL, "vdd_cpu"); //vdd_arm
- regulator_set_voltage(dcdc, 1200000, 1200000);
- regulator_enable(dcdc);
- printk("%s set dcdc3 vdd_arm=%dmV end\n", __func__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
-
- printk("%s,line=%d END\n", __func__,__LINE__);
-
- return 0;
-}
-
-static struct regulator_consumer_supply act8931_buck1_supply[] = {
- {
- .supply = "act_dcdc1",
- },
-
-};
-static struct regulator_consumer_supply act8931_buck2_supply[] = {
- {
- .supply = "act_dcdc2",
- },
-
-};
-static struct regulator_consumer_supply act8931_buck3_supply[] = {
- {
- .supply = "act_dcdc3",
- },
- {
- .supply = "vdd_cpu",
- },
-};
-
-static struct regulator_consumer_supply act8931_ldo1_supply[] = {
- {
- .supply = "act_ldo1",
- },
-};
-static struct regulator_consumer_supply act8931_ldo2_supply[] = {
- {
- .supply = "act_ldo2",
- },
-};
-
-static struct regulator_consumer_supply act8931_ldo3_supply[] = {
- {
- .supply = "act_ldo3",
- },
-};
-static struct regulator_consumer_supply act8931_ldo4_supply[] = {
- {
- .supply = "act_ldo4",
- },
-};
-
-static struct regulator_init_data act8931_buck1 = {
- .constraints = {
- .name = "ACT_DCDC1",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_buck1_supply),
- .consumer_supplies = act8931_buck1_supply,
-};
-
-/* */
-static struct regulator_init_data act8931_buck2 = {
- .constraints = {
- .name = "ACT_DCDC2",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_buck2_supply),
- .consumer_supplies = act8931_buck2_supply,
-};
-
-/* */
-static struct regulator_init_data act8931_buck3 = {
- .constraints = {
- .name = "ACT_DCDC3",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_buck3_supply),
- .consumer_supplies = act8931_buck3_supply,
-};
-
-static struct regulator_init_data act8931_ldo1 = {
- .constraints = {
- .name = "ACT_LDO1",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
-
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_ldo1_supply),
- .consumer_supplies = act8931_ldo1_supply,
-};
-
-/* */
-static struct regulator_init_data act8931_ldo2 = {
- .constraints = {
- .name = "ACT_LDO2",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
-
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_ldo2_supply),
- .consumer_supplies = act8931_ldo2_supply,
-};
-
-/* */
-static struct regulator_init_data act8931_ldo3 = {
- .constraints = {
- .name = "ACT_LDO3",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
-
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_ldo3_supply),
- .consumer_supplies = act8931_ldo3_supply,
-};
-
-/* */
-static struct regulator_init_data act8931_ldo4 = {
- .constraints = {
- .name = "ACT_LDO1",
- .min_uV = 600000,
- .max_uV = 3900000,
- .apply_uV = 1,
-
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_STANDBY | REGULATOR_MODE_NORMAL,
-
- },
- .num_consumer_supplies = ARRAY_SIZE(act8931_ldo4_supply),
- .consumer_supplies = act8931_ldo4_supply,
-};
-
-struct act8931_regulator_subdev act8931_regulator_subdev_id[] = {
- {
- .id=0,
- .initdata=&act8931_ldo1,
- },
-
- {
- .id=1,
- .initdata=&act8931_ldo2,
- },
-
- {
- .id=2,
- .initdata=&act8931_ldo3,
- },
-
- {
- .id=3,
- .initdata=&act8931_ldo4,
- },
-
- {
- .id=4,
- .initdata=&act8931_buck1,
- },
-
- {
- .id=5,
- .initdata=&act8931_buck2,
- },
- {
- .id=6,
- .initdata=&act8931_buck3,
- },
-
-};
-
-struct act8931_platform_data act8931_data={
- .set_init=act8931_set_init,
- .num_regulators=7,
- .regulators=act8931_regulator_subdev_id,
-
-};
-
-
-#endif
-
config MACH_RK3066B_SDK
bool "RK3066B SDK board"
-config MACH_RK3066B_M701
- bool "RK3066B M701 board"
endchoice
obj-$(CONFIG_MACH_RK3066B_FPGA) += board-rk3066b-fpga.o
obj-$(CONFIG_MACH_RK3066B_SDK) += board-rk3066b-sdk.o
-obj-$(CONFIG_MACH_RK3066B_M701) += board-rk3066b-m701.o
+++ /dev/null
-#include <mach/gpio.h>
-#include <plat/key.h>
-
-#define EV_ENCALL KEY_F4
-#define EV_MENU KEY_F1
-
-#define PRESS_LEV_LOW 1
-#define PRESS_LEV_HIGH 0
-
-static struct rk29_keys_button key_button[] = {
- {
- .desc = "vol-",
- .code = KEY_VOLUMEDOWN,
- .adc_value = 1,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "play",
- .code = KEY_POWER,
- .gpio = RK30_PIN0_PA4,
- .active_low = PRESS_LEV_LOW,
- .wakeup = 1,
- },
- {
- .desc = "vol+",
- .code = KEY_VOLUMEUP,
- .adc_value = 630,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "menu",
- .code = EV_MENU,
- .adc_value = 155,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "home",
- .code = KEY_HOME,
- .adc_value = 550,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "esc",
- .code = KEY_BACK,
- .adc_value = 386,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "camera",
- .code = KEY_CAMERA,
- .adc_value = 827,
- .gpio = INVALID_GPIO,
- .active_low = PRESS_LEV_LOW,
- },
-};
-struct rk29_keys_platform_data rk29_keys_pdata = {
- .buttons = key_button,
- .nbuttons = ARRAY_SIZE(key_button),
- .chn = 1, //chn: 0-7, if do not use ADC,set 'chn' -1
-};
-
+++ /dev/null
-/*
- *
- * Copyright (C) 2012 ROCKCHIP, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/skbuff.h>
-#include <linux/spi/spi.h>
-#include <linux/mmc/host.h>
-#include <linux/ion.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <mach/dvfs.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/board.h>
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/gpio.h>
-#include <mach/iomux.h>
-#include <linux/fb.h>
-#include <linux/regulator/machine.h>
-#include <linux/rfkill-rk.h>
-#include <linux/sensor-dev.h>
-#include <linux/mfd/tps65910.h>
-#include <linux/regulator/rk29-pwm-regulator.h>
-#if defined(CONFIG_HDMI_RK30)
- #include "../../../drivers/video/rockchip/hdmi/rk_hdmi.h"
-#endif
-
-#if defined(CONFIG_SPIM_RK29)
-#include "../../../drivers/spi/rk29_spim.h"
-#endif
-#if defined(CONFIG_MU509)
-#include <linux/mu509.h>
-#endif
-#if defined(CONFIG_MW100)
-#include <linux/mw100.h>
-#endif
-#if defined(CONFIG_MT6229)
-#include <linux/mt6229.h>
-#endif
-#if defined(CONFIG_SEW868)
-#include <linux/sew868.h>
-#endif
-#if defined(CONFIG_ANDROID_TIMED_GPIO)
-#include "../../../drivers/staging/android/timed_gpio.h"
-#endif
-
-#ifdef CONFIG_THREE_FB_BUFFER
-#define RK30_FB0_MEM_SIZE 12*SZ_1M
-#else
-#define RK30_FB0_MEM_SIZE 8*SZ_1M
-#endif
-
-#include "board-rk3066b-sdk-camera.c"
-#include "board-rk3066b-m701-key.c"
-
-#if defined(CONFIG_TOUCHSCREEN_GT8XX)
-#define TOUCH_RESET_PIN RK30_PIN2_PC0
-#define TOUCH_PWR_PIN RK30_PIN2_PB4
-static int goodix_init_platform_hw(void)
-{
- int ret;
-
- rk30_mux_api_set(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME, GPIO2C_GPIO2C0);
- rk30_mux_api_set(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME, GPIO2B_GPIO2B4);
- printk("%s:0x%x,0x%x\n",__func__,rk30_mux_api_get(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME),rk30_mux_api_get(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME));
-
- if (TOUCH_PWR_PIN != INVALID_GPIO) {
- ret = gpio_request(TOUCH_PWR_PIN, "goodix power pin");
- if (ret != 0) {
- gpio_free(TOUCH_PWR_PIN);
- printk("goodix power error\n");
- return -EIO;
- }
- gpio_direction_output(TOUCH_PWR_PIN, 0);
- gpio_set_value(TOUCH_PWR_PIN, GPIO_LOW);
- msleep(100);
- }
-
- if (TOUCH_RESET_PIN != INVALID_GPIO) {
- ret = gpio_request(TOUCH_RESET_PIN, "goodix reset pin");
- if (ret != 0) {
- gpio_free(TOUCH_RESET_PIN);
- printk("goodix gpio_request error\n");
- return -EIO;
- }
- gpio_direction_output(TOUCH_RESET_PIN, 1);
- msleep(100);
- //gpio_set_value(TOUCH_RESET_PIN, GPIO_LOW);
- //msleep(100);
- //gpio_set_value(TOUCH_RESET_PIN, GPIO_HIGH);
- //msleep(500);
- }
- return 0;
-}
-
-struct goodix_platform_data goodix_info = {
- .model = 8105,
- .irq_pin = RK30_PIN0_PD4,
- .rest_pin = TOUCH_RESET_PIN,
- .init_platform_hw = goodix_init_platform_hw,
-};
-#endif
-
-#if defined (CONFIG_TOUCHSCREEN_FT5306)
-
-#define TOUCH_RESET_PIN RK30_PIN2_PC0
-#define TOUCH_INT_PIN RK30_PIN0_PD4
-#define TOUCH_PWR_PIN RK30_PIN2_PB4
-
-static int ft5x0x_init_platform_hw(void)
-{
-
- rk30_mux_api_set(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME, GPIO2C_GPIO2C0);
- rk30_mux_api_set(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME, GPIO2B_GPIO2B4);
- //printk("%s:0x%x,0x%x\n",__func__,rk30_mux_api_get(GPIO2C0_LCDC1DATA16_SMCADDR0_TRACECLK_NAME),rk30_mux_api_get(GPIO2B4_LCDC1DATA12_SMCDATA12_TRACEDATA12_NAME));
-
- printk("==ft5x0x_init_platform_hw =\n");
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("ft5606_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("ift5606_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- mdelay(50);
- gpio_direction_input(TOUCH_INT_PIN);
- mdelay(10);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
- msleep(300);
- return 0;
-}
-
-void ft5x0x_exit_platform_hw(void)
-{
- printk("ft5606_exit_platform_hw\n");
- gpio_free(TOUCH_RESET_PIN);
- gpio_free(TOUCH_INT_PIN);
-}
-
-int ft5x0x_platform_sleep(void)
-{
- printk("ft5606_platform_sleep\n");
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- return 0;
-}
-
-int ft5x0x_platform_wakeup(void)
-{
- printk("ft5606_platform_wakeup\n");
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
- msleep(300);
- return 0;
-}
-
-static struct ft5606_platform_data ft5x0x_info = {
- .init_platform_hw= ft5x0x_init_platform_hw,
- .exit_platform_hw= ft5x0x_exit_platform_hw,
- .platform_sleep = ft5x0x_platform_sleep,
- .platform_wakeup = ft5x0x_platform_wakeup,
-};
-#endif
-
-
-static struct spi_board_info board_spi_devices[] = {
-};
-
-/***********************************************************
-* rk30 backlight
-************************************************************/
-#ifdef CONFIG_BACKLIGHT_RK29_BL
-#define PWM_ID 2
-#define PWM_MUX_NAME GPIO3D5_PWM2_JTAGTCK_OTGDRVVBUS_NAME
-#define PWM_MUX_MODE GPIO3D_PWM2
-#define PWM_MUX_MODE_GPIO GPIO3D_GPIO3D5
-#define PWM_GPIO RK30_PIN3_PD5
-#define PWM_EFFECT_VALUE 0
-
-#define LCD_DISP_ON_PIN
-
-#ifdef LCD_DISP_ON_PIN
-#define BL_EN_PIN RK30_PIN0_PA2
-#define BL_EN_VALUE GPIO_HIGH
-#endif
-static int rk29_backlight_io_init(void)
-{
- int ret = 0;
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
-#ifdef LCD_DISP_ON_PIN
- // rk30_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
-
- ret = gpio_request(BL_EN_PIN, NULL);
- if (ret != 0) {
- gpio_free(BL_EN_PIN);
- }
-
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
-#endif
- return ret;
-}
-
-static int rk29_backlight_io_deinit(void)
-{
- int ret = 0;
-#ifdef LCD_DISP_ON_PIN
- gpio_free(BL_EN_PIN);
-#endif
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- return ret;
-}
-
-static int rk29_backlight_pwm_suspend(void)
-{
- int ret = 0;
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- if (gpio_request(PWM_GPIO, NULL)) {
- printk("func %s, line %d: request gpio fail\n", __FUNCTION__, __LINE__);
- return -1;
- }
- gpio_direction_output(PWM_GPIO, GPIO_LOW);
-#ifdef LCD_DISP_ON_PIN
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, !BL_EN_VALUE);
-#endif
- return ret;
-}
-
-static int rk29_backlight_pwm_resume(void)
-{
- gpio_free(PWM_GPIO);
- rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
-#ifdef LCD_DISP_ON_PIN
- msleep(30);
- gpio_direction_output(BL_EN_PIN, 1);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
-#endif
- return 0;
-}
-
-static struct rk29_bl_info rk29_bl_info = {
- .pwm_id = PWM_ID,
- .bl_ref = PWM_EFFECT_VALUE,
- .io_init = rk29_backlight_io_init,
- .io_deinit = rk29_backlight_io_deinit,
- .pwm_suspend = rk29_backlight_pwm_suspend,
- .pwm_resume = rk29_backlight_pwm_resume,
-};
-
-static struct platform_device rk29_device_backlight = {
- .name = "rk29_backlight",
- .id = -1,
- .dev = {
- .platform_data = &rk29_bl_info,
- }
-};
-
-#endif
-
-#ifdef CONFIG_RK29_SUPPORT_MODEM
-
-#define RK30_MODEM_POWER RK30_PIN2_PB0
-#define RK30_MODEM_POWER_IOMUX rk29_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0)
-
-static int rk30_modem_io_init(void)
-{
- printk("%s\n", __FUNCTION__);
- RK30_MODEM_POWER_IOMUX;
-
- return 0;
-}
-
-static struct rk29_io_t rk30_modem_io = {
- .io_addr = RK30_MODEM_POWER,
- .enable = GPIO_HIGH,
- .disable = GPIO_LOW,
- .io_init = rk30_modem_io_init,
-};
-
-static struct platform_device rk30_device_modem = {
- .name = "rk30_modem",
- .id = -1,
- .dev = {
- .platform_data = &rk30_modem_io,
- }
-};
-#endif
-#if defined(CONFIG_MU509)
-static int mu509_io_init(void)
-{
-
- rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
- rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
- rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
- rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
- return 0;
-}
-
-static int mu509_io_deinit(void)
-{
-
- return 0;
-}
-
-struct rk29_mu509_data rk29_mu509_info = {
- .io_init = mu509_io_init,
- .io_deinit = mu509_io_deinit,
- .modem_power_en = RK30_PIN2_PB0,
- .bp_power = RK30_PIN2_PB0,
- .bp_reset = RK30_PIN2_PD1,
- .ap_wakeup_bp = RK30_PIN2_PB7,
- .bp_wakeup_ap = RK30_PIN6_PA0,
-};
-struct platform_device rk29_device_mu509 = {
- .name = "mu509",
- .id = -1,
- .dev = {
- .platform_data = &rk29_mu509_info,
- }
- };
-#endif
-#if defined(CONFIG_MW100)
-static int mw100_io_init(void)
-{
- rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
- rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
- rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
- rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
- return 0;
-}
-
-static int mw100_io_deinit(void)
-{
-
- return 0;
-}
-
-struct rk29_mw100_data rk29_mw100_info = {
- .io_init = mw100_io_init,
- .io_deinit = mw100_io_deinit,
- .modem_power_en = RK30_PIN6_PB0,
- .bp_power = RK30_PIN2_PB0,
- .bp_reset = RK30_PIN2_PD1,
- .ap_wakeup_bp = RK30_PIN2_PB7,
- .bp_wakeup_ap = RK30_PIN6_PA0,
-};
-struct platform_device rk29_device_mw100 = {
- .name = "mw100",
- .id = -1,
- .dev = {
- .platform_data = &rk29_mw100_info,
- }
- };
-#endif
-#if defined(CONFIG_MT6229)
-static int mt6229_io_init(void)
-{
- rk30_mux_api_set(GPIO2B0_LCDC1DATA8_SMCDATA8_TRACEDATA8_NAME, GPIO2B_GPIO2B0);
- rk30_mux_api_set(GPIO2D1_LCDC1DEN_SMCWEN_NAME, GPIO2D_GPIO2D1);
- rk30_mux_api_set(GPIO2B7_LCDC1DATA15_SMCADDR19_HSADCDATA7_NAME, GPIO2B_GPIO2B7);
- rk30_mux_api_set(GPIO2C0_LCDCDATA16_GPSCLK_HSADCCLKOUT_NAME, GPIO2C_GPIO2C0);
- return 0;
-}
-
-static int mt6229_io_deinit(void)
-{
-
- return 0;
-}
-
-struct rk29_mt6229_data rk29_mt6229_info = {
- .io_init = mt6229_io_init,
- .io_deinit = mt6229_io_deinit,
- .modem_power_en = RK30_PIN2_PB0,
- .bp_power = RK30_PIN2_PB0,//RK30_PIN2_PB6,
- .bp_reset = RK30_PIN2_PD1,
- .ap_wakeup_bp = RK30_PIN2_PC0,
- .bp_wakeup_ap = RK30_PIN6_PA0,
-};
-struct platform_device rk29_device_mt6229 = {
- .name = "mt6229",
- .id = -1,
- .dev = {
- .platform_data = &rk29_mt6229_info,
- }
- };
-#endif
-#if defined(CONFIG_SEW868)
-static int sew868_io_init(void)
-{
- rk30_mux_api_set(GPIO2B6_LCDC1DATA14_SMCADDR18_TSSYNC_NAME, GPIO2B_GPIO2B6);
- rk30_mux_api_set(GPIO4D2_SMCDATA10_TRACEDATA10_NAME, GPIO4D_GPIO4D2);
- rk30_mux_api_set(GPIO4D4_SMCDATA12_TRACEDATA12_NAME, GPIO4D_GPIO4D4);
- return 0;
-}
-static int sew868_io_deinit(void)
-{
- return 0;
-}
-struct rk30_sew868_data rk30_sew868_info = {
- .io_init = sew868_io_init,
- .io_deinit = sew868_io_deinit,
- .bp_power = RK30_PIN6_PB2,
- .bp_power_active_low = 1,
- .bp_sys = RK30_PIN2_PB6,
- .bp_reset = RK30_PIN4_PD2,
- .bp_reset_active_low = 1,
- .bp_wakeup_ap = RK30_PIN4_PD4,
- .ap_wakeup_bp = NULL,
-};
-
-struct platform_device rk30_device_sew868 = {
- .name = "sew868",
- .id = -1,
- .dev = {
- .platform_data = &rk30_sew868_info,
- }
- };
-#endif
-
-
-#if defined (CONFIG_GS_MMA7660)
-#define MMA7660_INT_PIN RK30_PIN4_PC0
-static int gs_init_platform_hw(void)
-{
- rk30_mux_api_set(GPIO4C0_SMCDATA0_TRACEDATA0_NAME, GPIO4C_GPIO4C0);
- if(gpio_request(MMA7660_INT_PIN, NULL) != 0){
- gpio_free(MMA7660_INT_PIN);
- printk("gsensor gpio_request error\n");
- return -EIO;
- }
- //gpio_direction_input(MMA7660_INT_PIN);
- gpio_pull_updown(MMA7660_INT_PIN, 1);
- return 0;
-}
-
-
-static struct gs_platform_data mma7660_info = {
- .model= 7660,
- .swap_xy = 0,
- .init_platform_hw= gs_init_platform_hw,
-};
-#endif
-
-
-/*MMA8452 gsensor*/
-#if defined (CONFIG_GS_MMA8452)
-#define MMA8452_INT_PIN RK30_PIN3_PD7
-
-static int mma8452_init_platform_hw(void)
-{
- return 0;
-}
-
-static struct sensor_platform_data mma8452_info = {
- .type = SENSOR_TYPE_ACCEL,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .init_platform_hw = mma8452_init_platform_hw,
- .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
-};
-#endif
-#if defined (CONFIG_GS_LIS3DH)
-#define LIS3DH_INT_PIN RK30_PIN3_PD7
-
-static int lis3dh_init_platform_hw(void)
-{
-
- return 0;
-}
-
-static struct sensor_platform_data lis3dh_info = {
- .type = SENSOR_TYPE_ACCEL,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .init_platform_hw = lis3dh_init_platform_hw,
- .orientation = {-1, 0, 0, 0, 0, 1, 0, -1, 0},
-};
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
-static struct sensor_platform_data akm8975_info =
-{
- .type = SENSOR_TYPE_COMPASS,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .m_layout =
- {
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
-
- {
- {1, 0, 0},
- {0, 1, 0},
- {0, 0, 1},
- },
- }
-};
-
-#endif
-
-#if defined(CONFIG_GYRO_L3G4200D)
-
-#include <linux/l3g4200d.h>
-#define L3G4200D_INT_PIN RK30_PIN0_PB4
-
-static int l3g4200d_init_platform_hw(void)
-{
- return 0;
-}
-
-static struct sensor_platform_data l3g4200d_info = {
- .type = SENSOR_TYPE_GYROSCOPE,
- .irq_enable = 1,
- .poll_delay_ms = 30,
- .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
- .init_platform_hw = l3g4200d_init_platform_hw,
- .x_min = 40,//x_min,y_min,z_min = (0-100) according to hardware
- .y_min = 40,
- .z_min = 20,
-};
-
-#endif
-
-#ifdef CONFIG_LS_CM3217
-static struct sensor_platform_data cm3217_info = {
- .type = SENSOR_TYPE_LIGHT,
- .irq_enable = 0,
- .poll_delay_ms = 500,
-};
-
-#endif
-
-#ifdef CONFIG_FB_ROCKCHIP
-
-#define LCD_CS_PIN INVALID_GPIO
-#define LCD_CS_VALUE GPIO_HIGH
-
-#define LCD_EN_PIN RK30_PIN0_PB0
-#define LCD_EN_VALUE GPIO_HIGH
-
-static int rk_fb_io_init(struct rk29_fb_setting_info *fb_setting)
-{
- int ret = 0;
-
- if(LCD_CS_PIN !=INVALID_GPIO)
- {
- ret = gpio_request(LCD_CS_PIN, NULL);
- if (ret != 0)
- {
- gpio_free(LCD_CS_PIN);
- printk(KERN_ERR "request lcd cs pin fail!\n");
- return -1;
- }
- else
- {
- gpio_direction_output(LCD_CS_PIN, LCD_CS_VALUE);
- }
- }
-
- if(LCD_EN_PIN !=INVALID_GPIO)
- {
- ret = gpio_request(LCD_EN_PIN, NULL);
- if (ret != 0)
- {
- gpio_free(LCD_EN_PIN);
- printk(KERN_ERR "request lcd en pin fail!\n");
- return -1;
- }
- else
- {
- gpio_direction_output(LCD_EN_PIN, LCD_EN_VALUE);
- }
- }
- return 0;
-}
-static int rk_fb_io_disable(void)
-{
- if(LCD_CS_PIN !=INVALID_GPIO)
- {
- gpio_set_value(LCD_CS_PIN, !LCD_CS_VALUE);
- }
- if(LCD_EN_PIN !=INVALID_GPIO)
- {
- gpio_set_value(LCD_EN_PIN, !LCD_EN_VALUE);
- }
- return 0;
-}
-static int rk_fb_io_enable(void)
-{
- if(LCD_CS_PIN !=INVALID_GPIO)
- {
- gpio_set_value(LCD_CS_PIN, LCD_CS_VALUE);
- }
- if(LCD_EN_PIN !=INVALID_GPIO)
- {
- gpio_set_value(LCD_EN_PIN, LCD_EN_VALUE);
- }
- return 0;
-}
-
-#if defined(CONFIG_LCDC0_RK31)
-struct rk29fb_info lcdc0_screen_info = {
- .prop = PRMRY, //primary display device
- .io_init = rk_fb_io_init,
- .io_disable = rk_fb_io_disable,
- .io_enable = rk_fb_io_enable,
- .set_screen_info = set_lcd_info,
-};
-#endif
-
-#if defined(CONFIG_LCDC1_RK31)
-struct rk29fb_info lcdc1_screen_info = {
- #if defined(CONFIG_HDMI_RK30)
- .prop = EXTEND, //extend display device
- .lcd_info = NULL,
- .set_screen_info = hdmi_init_lcdc,
- #endif
-};
-#endif
-
-static struct resource resource_fb[] = {
- [0] = {
- .name = "fb0 buf",
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "ipp buf", //for rotate
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .name = "fb2 buf",
- .start = 0,
- .end = 0,//RK30_FB0_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device device_fb = {
- .name = "rk-fb",
- .id = -1,
- .num_resources = ARRAY_SIZE(resource_fb),
- .resource = resource_fb,
-};
-#endif
-
-#if defined(CONFIG_LCDC0_RK31)
-static struct resource resource_lcdc0[] = {
- [0] = {
- .name = "lcdc0 reg",
- .start = RK30_LCDC0_PHYS,
- .end = RK30_LCDC0_PHYS + RK30_LCDC0_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-
- [1] = {
- .name = "lcdc0 irq",
- .start = IRQ_LCDC0,
- .end = IRQ_LCDC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device device_lcdc0 = {
- .name = "rk30-lcdc",
- .id = 0,
- .num_resources = ARRAY_SIZE(resource_lcdc0),
- .resource = resource_lcdc0,
- .dev = {
- .platform_data = &lcdc0_screen_info,
- },
-};
-#endif
-#if defined(CONFIG_LCDC1_RK31)
-static struct resource resource_lcdc1[] = {
- [0] = {
- .name = "lcdc1 reg",
- .start = RK30_LCDC1_PHYS,
- .end = RK30_LCDC1_PHYS + RK30_LCDC1_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "lcdc1 irq",
- .start = IRQ_LCDC1,
- .end = IRQ_LCDC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device device_lcdc1 = {
- .name = "rk30-lcdc",
- .id = 1,
- .num_resources = ARRAY_SIZE(resource_lcdc1),
- .resource = resource_lcdc1,
- .dev = {
- .platform_data = &lcdc1_screen_info,
- },
-};
-#endif
-
-#ifdef CONFIG_ANDROID_TIMED_GPIO
-static struct timed_gpio timed_gpios[] = {
- {
- .name = "vibrator",
- .gpio = RK30_PIN3_PD3,
- .max_timeout = 1000,
- .active_low = 0,
- .adjust_time =20, //adjust for diff product
- },
-};
-
-static struct timed_gpio_platform_data rk29_vibrator_info = {
- .num_gpios = 1,
- .gpios = timed_gpios,
-};
-
-static struct platform_device rk29_device_vibrator = {
- .name = "timed-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rk29_vibrator_info,
- },
-
-};
-#endif
-
-#ifdef CONFIG_LEDS_GPIO_PLATFORM
-static struct gpio_led rk29_leds[] = {
- {
- .name = "button-backlight",
- .gpio = RK30_PIN2_PB3,
- .default_trigger = "timer",
- .active_low = 0,
- .retain_state_suspended = 0,
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static struct gpio_led_platform_data rk29_leds_pdata = {
- .leds = rk29_leds,
- .num_leds = ARRAY_SIZE(rk29_leds),
-};
-
-static struct platform_device rk29_device_gpio_leds = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rk29_leds_pdata,
- },
-};
-#endif
-
-#ifdef CONFIG_RK_IRDA
-#define IRDA_IRQ_PIN RK30_PIN0_PA3
-
-static int irda_iomux_init(void)
-{
- int ret = 0;
-
- //irda irq pin
- ret = gpio_request(IRDA_IRQ_PIN, NULL);
- if (ret != 0) {
- gpio_free(IRDA_IRQ_PIN);
- printk(">>>>>> IRDA_IRQ_PIN gpio_request err \n ");
- }
- gpio_pull_updown(IRDA_IRQ_PIN, PullDisable);
- gpio_direction_input(IRDA_IRQ_PIN);
-
- return 0;
-}
-
-static int irda_iomux_deinit(void)
-{
- gpio_free(IRDA_IRQ_PIN);
- return 0;
-}
-
-static struct irda_info rk29_irda_info = {
- .intr_pin = IRDA_IRQ_PIN,
- .iomux_init = irda_iomux_init,
- .iomux_deinit = irda_iomux_deinit,
- //.irda_pwr_ctl = bu92747guw_power_ctl,
-};
-
-static struct platform_device irda_device = {
-#ifdef CONFIG_RK_IRDA_NET
- .name = "rk_irda",
-#else
- .name = "bu92747_irda",
-#endif
- .id = -1,
- .dev = {
- .platform_data = &rk29_irda_info,
- }
-};
-#endif
-
-#ifdef CONFIG_ION
-#define ION_RESERVE_SIZE (80 * SZ_1M)
-static struct ion_platform_data rk30_ion_pdata = {
- .nr = 1,
- .heaps = {
- {
- .type = ION_HEAP_TYPE_CARVEOUT,
- .id = ION_NOR_HEAP_ID,
- .name = "norheap",
- .size = ION_RESERVE_SIZE,
- }
- },
-};
-
-static struct platform_device device_ion = {
- .name = "ion-rockchip",
- .id = 0,
- .dev = {
- .platform_data = &rk30_ion_pdata,
- },
-};
-#endif
-
-/**************************************************************************************************
- * SDMMC devices, include the module of SD,MMC,and sdio.noted by xbw at 2012-03-05
-**************************************************************************************************/
-#ifdef CONFIG_SDMMC_RK29
-#include "board-rk3066b-sdk-sdmmc.c"
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
-#define SDMMC0_WRITE_PROTECT_PIN RK30_PIN3_PB7 //According to your own project to set the value of write-protect-pin.
-#endif
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
-#define SDMMC1_WRITE_PROTECT_PIN RK30_PIN3_PC7 //According to your own project to set the value of write-protect-pin.
-#endif
-
-#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK30_PIN6_PB2
-
-#endif //endif ---#ifdef CONFIG_SDMMC_RK29
-
-#ifdef CONFIG_SDMMC0_RK29
-static int rk29_sdmmc0_cfg_gpio(void)
-{
-#ifdef CONFIG_SDMMC_RK29_OLD
- rk30_mux_api_set(GPIO3B1_SDMMC0CMD_NAME, GPIO3B_SDMMC0_CMD);
- rk30_mux_api_set(GPIO3B0_SDMMC0CLKOUT_NAME, GPIO3B_SDMMC0_CLKOUT);
- rk30_mux_api_set(GPIO3B2_SDMMC0DATA0_NAME, GPIO3B_SDMMC0_DATA0);
- rk30_mux_api_set(GPIO3B3_SDMMC0DATA1_NAME, GPIO3B_SDMMC0_DATA1);
- rk30_mux_api_set(GPIO3B4_SDMMC0DATA2_NAME, GPIO3B_SDMMC0_DATA2);
- rk30_mux_api_set(GPIO3B5_SDMMC0DATA3_NAME, GPIO3B_SDMMC0_DATA3);
-
- rk30_mux_api_set(GPIO3B6_SDMMC0DETECTN_NAME, GPIO3B_GPIO3B6);
-
- rk30_mux_api_set(GPIO3A7_SDMMC0PWREN_NAME, GPIO3A_GPIO3A7);
- gpio_request(RK30_PIN3_PA7, "sdmmc-power");
- gpio_direction_output(RK30_PIN3_PA7, GPIO_LOW);
-
-#else
- rk29_sdmmc_set_iomux(0, 0xFFFF);
-
- rk30_mux_api_set(GPIO3B0_SDMMC0DETECTN_NAME, GPIO3B_SDMMC0DETECTN);
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- gpio_request(SDMMC0_WRITE_PROTECT_PIN, "sdmmc-wp");
- gpio_direction_input(SDMMC0_WRITE_PROTECT_PIN);
-#endif
-
-#endif
-
- return 0;
-}
-
-#define CONFIG_SDMMC0_USE_DMA
-struct rk29_sdmmc_platform_data default_sdmmc0_data = {
- .host_ocr_avail =
- (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
- MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
- MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36),
- .host_caps =
- (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc0_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-
- .dma_name = "sd_mmc",
-#ifdef CONFIG_SDMMC0_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
- .detect_irq = RK30_PIN3_PB6, // INVALID_GPIO
- .enable_sd_wakeup = 0,
-
-#if defined(CONFIG_SDMMC0_RK29_WRITE_PROTECT)
- .write_prt = SDMMC0_WRITE_PROTECT_PIN,
-#else
- .write_prt = INVALID_GPIO,
-#endif
-};
-#endif // CONFIG_SDMMC0_RK29
-
-#ifdef CONFIG_SDMMC1_RK29
-#define CONFIG_SDMMC1_USE_DMA
-static int rk29_sdmmc1_cfg_gpio(void)
-{
-#if defined(CONFIG_SDMMC_RK29_OLD)
- rk30_mux_api_set(GPIO3C0_SMMC1CMD_NAME, GPIO3C_SMMC1_CMD);
- rk30_mux_api_set(GPIO3C5_SDMMC1CLKOUT_NAME, GPIO3C_SDMMC1_CLKOUT);
- rk30_mux_api_set(GPIO3C1_SDMMC1DATA0_NAME, GPIO3C_SDMMC1_DATA0);
- rk30_mux_api_set(GPIO3C2_SDMMC1DATA1_NAME, GPIO3C_SDMMC1_DATA1);
- rk30_mux_api_set(GPIO3C3_SDMMC1DATA2_NAME, GPIO3C_SDMMC1_DATA2);
- rk30_mux_api_set(GPIO3C4_SDMMC1DATA3_NAME, GPIO3C_SDMMC1_DATA3);
- //rk30_mux_api_set(GPIO3C6_SDMMC1DETECTN_NAME, GPIO3C_SDMMC1_DETECT_N);
-
-#else
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- gpio_request(SDMMC1_WRITE_PROTECT_PIN, "sdio-wp");
- gpio_direction_input(SDMMC1_WRITE_PROTECT_PIN);
-#endif
-
-#endif
-
- return 0;
-}
-
-struct rk29_sdmmc_platform_data default_sdmmc1_data = {
- .host_ocr_avail =
- (MMC_VDD_25_26 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_28_29 |
- MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 |
- MMC_VDD_33_34),
-
-#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
- .host_caps = (MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-#else
- .host_caps =
- (MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-#endif
-
- .io_init = rk29_sdmmc1_cfg_gpio,
-
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-
- .dma_name = "sdio",
-#ifdef CONFIG_SDMMC1_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-
-#if !defined(CONFIG_USE_SDMMC1_FOR_WIFI_DEVELOP_BOARD)
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- .status = rk29sdk_wifi_status,
- .register_status_notify = rk29sdk_wifi_status_register,
-#endif
-#if 0
- .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
-#endif
-
-#if defined(CONFIG_SDMMC1_RK29_WRITE_PROTECT)
- .write_prt = SDMMC1_WRITE_PROTECT_PIN,
-#else
- .write_prt = INVALID_GPIO,
-#endif
-
-#else
- .detect_irq = INVALID_GPIO,
- .enable_sd_wakeup = 0,
-#endif
-
-};
-#endif //endif--#ifdef CONFIG_SDMMC1_RK29
-
-/**************************************************************************************************
- * the end of setting for SDMMC devices
-**************************************************************************************************/
-
-#ifdef CONFIG_BATTERY_RK30_ADC
-static struct rk30_adc_battery_platform_data rk30_adc_battery_platdata = {
- .dc_det_pin = RK30_PIN0_PB2,
- .batt_low_pin = RK30_PIN0_PB1,
- .charge_set_pin = INVALID_GPIO,
- .charge_ok_pin = RK30_PIN0_PA6,
- .dc_det_level = GPIO_LOW,
- .charge_ok_level = GPIO_HIGH,
-};
-
-static struct platform_device rk30_device_adc_battery = {
- .name = "rk30-battery",
- .id = -1,
- .dev = {
- .platform_data = &rk30_adc_battery_platdata,
- },
-};
-#endif
-#ifdef CONFIG_RK30_PWM_REGULATOR
-const static int pwm_voltage_map[] = {
- 1000000, 1025000, 1050000, 1075000, 1100000, 1125000, 1150000, 1175000, 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, 1375000, 1400000
-};
-
-static struct regulator_consumer_supply pwm_dcdc1_consumers[] = {
- {
- .supply = "vdd_core",
- }
-};
-
-struct regulator_init_data pwm_regulator_init_dcdc[1] =
-{
- {
- .constraints = {
- .name = "PWM_DCDC1",
- .min_uV = 600000,
- .max_uV = 1800000, //0.6-1.8V
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwm_dcdc1_consumers),
- .consumer_supplies = pwm_dcdc1_consumers,
- },
-};
-
-static struct pwm_platform_data pwm_regulator_info[1] = {
- {
- .pwm_id = 3,
- .pwm_gpio = RK30_PIN3_PD6,
- .pwm_iomux_name = GPIO3D6_PWM3_JTAGTMS_HOSTDRVVBUS_NAME,
- .pwm_iomux_pwm = GPIO3D_PWM3,
- .pwm_iomux_gpio = GPIO3D_GPIO3D6,
- .pwm_voltage = 1000000,
- .suspend_voltage = 1050000,
- .min_uV = 1000000,
- .max_uV = 1400000,
- .coefficient = 455, //45.5%
- .pwm_voltage_map = pwm_voltage_map,
- .init_data = &pwm_regulator_init_dcdc[0],
- },
-};
-
-struct platform_device pwm_regulator_device[1] = {
- {
- .name = "pwm-voltage-regulator",
- .id = 0,
- .dev = {
- .platform_data = &pwm_regulator_info[0],
- }
- },
-};
-#endif
-
-#ifdef CONFIG_RK29_VMAC
-#define PHY_PWR_EN_GPIO RK30_PIN1_PD6
-#include "board-rk30-sdk-vmac.c"
-#endif
-
-#ifdef CONFIG_RFKILL_RK
-// bluetooth rfkill device, its driver in net/rfkill/rfkill-rk.c
-static struct rfkill_rk_platform_data rfkill_rk_platdata = {
- .type = RFKILL_TYPE_BLUETOOTH,
-
- .poweron_gpio = { // BT_REG_ON
- .io = RK30_PIN3_PC7,
- .enable = GPIO_HIGH,
- .iomux = {
- .name = GPIO3C7_SDMMC1WRITEPRT_RMIICRS_NAME,
- .fgpio = GPIO3C_GPIO3C7,
- },
- },
-
- .reset_gpio = { // BT_RST
- .io = RK30_PIN3_PD1, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW,
- .iomux = {
- .name = GPIO3D1_SDMMC1BACKENDPWR_MIIMDCLK_NAME,
- .fgpio = GPIO3D_GPIO3D1,
- },
- },
-
- .wake_gpio = { // BT_WAKE, use to control bt's sleep and wakeup
- .io = RK30_PIN3_PC6, // set io to INVALID_GPIO for disable it
- .enable = GPIO_HIGH,
- .iomux = {
- .name = GPIO3C6_SDMMC1DETECTN_RMIIRXERR_NAME,
- .fgpio = GPIO3C_GPIO3C6,
- },
- },
-
- .wake_host_irq = { // BT_HOST_WAKE, for bt wakeup host when it is in deep sleep
- .gpio = {
- .io = RK30_PIN0_PA5, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW, // set GPIO_LOW for falling, set 0 for rising
- .iomux = {
- .name = NULL,
- },
- },
- },
-
- .rts_gpio = { // UART_RTS, enable or disable BT's data coming
- .io = RK30_PIN1_PA3, // set io to INVALID_GPIO for disable it
- .enable = GPIO_LOW,
- .iomux = {
- .name = GPIO1A3_UART0RTSN_NAME,
- .fgpio = GPIO1A_GPIO1A3,
- .fmux = GPIO1A_UART0RTSN,
- },
- },
-};
-
-static struct platform_device device_rfkill_rk = {
- .name = "rfkill_rk",
- .id = -1,
- .dev = {
- .platform_data = &rfkill_rk_platdata,
- },
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
-#ifdef CONFIG_FB_ROCKCHIP
- &device_fb,
-#endif
-#if defined(CONFIG_LCDC0_RK31)
- &device_lcdc0,
-#endif
-#if defined(CONFIG_LCDC1_RK31)
- &device_lcdc1,
-#endif
-
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- &rk29_device_backlight,
-#endif
-
-#ifdef CONFIG_ION
- &device_ion,
-#endif
-#ifdef CONFIG_ANDROID_TIMED_GPIO
- &rk29_device_vibrator,
-#endif
-#ifdef CONFIG_LEDS_GPIO_PLATFORM
- &rk29_device_gpio_leds,
-#endif
-#ifdef CONFIG_RK_IRDA
- &irda_device,
-#endif
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- &rk29sdk_wifi_device,
-#endif
-#ifdef CONFIG_RK29_SUPPORT_MODEM
- &rk30_device_modem,
-#endif
-#if defined(CONFIG_MU509)
- &rk29_device_mu509,
-#endif
-#if defined(CONFIG_MW100)
- &rk29_device_mw100,
-#endif
-#if defined(CONFIG_MT6229)
- &rk29_device_mt6229,
-#endif
-#if defined(CONFIG_SEW868)
- &rk30_device_sew868,
-#endif
-#ifdef CONFIG_BATTERY_RK30_ADC
- &rk30_device_adc_battery,
-#endif
-#ifdef CONFIG_RFKILL_RK
- &device_rfkill_rk,
-#endif
-};
-
-// i2c
-#ifdef CONFIG_I2C0_RK30
-static struct i2c_board_info __initdata i2c0_info[] = {
-#if defined (CONFIG_GS_MMA7660)
- {
- .type = "gs_mma7660",
- .addr = 0x4c,
- .flags = 0,
- .irq = MMA7660_INT_PIN,
- .platform_data = &mma7660_info,
- },
-#endif
-#if defined (CONFIG_GS_MMA8452)
- {
- .type = "gs_mma8452",
- .addr = 0x1d,
- .flags = 0,
- .irq = MMA8452_INT_PIN,
- .platform_data = &mma8452_info,
- },
-#endif
-#if defined (CONFIG_GS_LIS3DH)
- {
- .type = "gs_lis3dh",
- .addr = 0x19, //0x19(SA0-->VCC), 0x18(SA0-->GND)
- .flags = 0,
- .irq = LIS3DH_INT_PIN,
- .platform_data = &lis3dh_info,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
- {
- .type = "ak8975",
- .addr = 0x0d,
- .flags = 0,
- .irq = RK30_PIN0_PD5,
- .platform_data = &akm8975_info,
- },
-#endif
-#if defined (CONFIG_GYRO_L3G4200D)
- {
- .type = "l3g4200d_gryo",
- .addr = 0x69,
- .flags = 0,
- .irq = L3G4200D_INT_PIN,
- .platform_data = &l3g4200d_info,
- },
-#endif
-#if defined (CONFIG_SND_SOC_RK1000)
- {
- .type = "rk1000_i2c_codec",
- .addr = 0x60,
- .flags = 0,
- },
- {
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_RT5631)
- {
- .type = "rt5631",
- .addr = 0x1a,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_ES8323)
- {
- .type = "es8323",
- .addr = 0x10,
- .flags = 0,
- },
-#endif
-#ifdef CONFIG_MFD_RK610
- {
- .type = "rk610_ctl",
- .addr = 0x40,
- .flags = 0,
- },
-#ifdef CONFIG_RK610_TVOUT
- {
- .type = "rk610_tvout",
- .addr = 0x42,
- .flags = 0,
- },
-#endif
-#ifdef CONFIG_RK610_HDMI
- {
- .type = "rk610_hdmi",
- .addr = 0x46,
- .flags = 0,
- .irq = RK29_PIN5_PA2,
- },
-#endif
-#ifdef CONFIG_SND_SOC_RK610
- {//RK610_CODEC addr from 0x60 to 0x80 (0x60~0x80)
- .type = "rk610_i2c_codec",
- .addr = 0x60,
- .flags = 0,
- },
-#endif
-#endif
-
-};
-#endif
-
-#define PMIC_TYPE_WM8326 1
-#define PMIC_TYPE_TPS65910 2
-int __sramdata g_pmic_type = 0;
-#ifdef CONFIG_I2C1_RK30
-#ifdef CONFIG_MFD_WM831X_I2C
-#include "board-rk3066b-sdk-wm8326.c"
-#endif
-#ifdef CONFIG_MFD_TPS65910
-#define TPS65910_HOST_IRQ RK30_PIN6_PA4
-#include "board-rk3066b-sdk-tps65910.c"
-#endif
-
-static struct i2c_board_info __initdata i2c1_info[] = {
-#if defined (CONFIG_MFD_WM831X_I2C)
- {
- .type = "wm8326",
- .addr = 0x34,
- .flags = 0,
- .irq = RK30_PIN0_PB3,
- .platform_data = &wm831x_platdata,
- },
-#endif
-#if defined (CONFIG_MFD_TPS65910)
- {
- .type = "tps65910",
- .addr = TPS65910_I2C_ID0,
- .flags = 0,
- .irq = TPS65910_HOST_IRQ,
- .platform_data = &tps65910_data,
- },
-#endif
-};
-#endif
-
-void __sramfunc board_pmu_suspend(void)
-{
- #if defined (CONFIG_MFD_WM831X_I2C)
- if(g_pmic_type == PMIC_TYPE_WM8326)
- board_pmu_wm8326_suspend();
- #endif
- #if defined (CONFIG_MFD_TPS65910)
- if(g_pmic_type == PMIC_TYPE_TPS65910)
- board_pmu_tps65910_suspend();
- #endif
-}
-
-void __sramfunc board_pmu_resume(void)
-{
- #if defined (CONFIG_MFD_WM831X_I2C)
- if(g_pmic_type == PMIC_TYPE_WM8326)
- board_pmu_wm8326_resume();
- #endif
- #if defined (CONFIG_MFD_TPS65910)
- if(g_pmic_type == PMIC_TYPE_TPS65910)
- board_pmu_tps65910_resume();
- #endif
-}
-
- int __sramdata gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
-
-void __sramfunc rk30_pwm_logic_suspend_voltage(void)
-{
-#ifdef CONFIG_RK30_PWM_REGULATOR
-
-// int gpio0d7_iomux,gpio0d7_do,gpio0d7_dir,gpio0d7_en;
- sram_udelay(10000);
- gpio0d7_iomux = readl_relaxed(GRF_GPIO0D_IOMUX);
- gpio0d7_do = grf_readl(GRF_GPIO0H_DO);
- gpio0d7_dir = grf_readl(GRF_GPIO0H_DIR);
- gpio0d7_en = grf_readl(GRF_GPIO0H_EN);
-
- writel_relaxed((1<<30), GRF_GPIO0D_IOMUX);
- grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DIR);
- grf_writel((1<<31)|(1<<15), GRF_GPIO0H_DO);
- grf_writel((1<<31)|(1<<15), GRF_GPIO0H_EN);
-#endif
-}
-void __sramfunc rk30_pwm_logic_resume_voltage(void)
-{
-#ifdef CONFIG_RK30_PWM_REGULATOR
- writel_relaxed((1<<30)|gpio0d7_iomux, GRF_GPIO0D_IOMUX);
- grf_writel((1<<31)|gpio0d7_en, GRF_GPIO0H_EN);
- grf_writel((1<<31)|gpio0d7_dir, GRF_GPIO0H_DIR);
- grf_writel((1<<31)|gpio0d7_do, GRF_GPIO0H_DO);
- sram_udelay(10000);
-
-#endif
-
-}
-extern void pwm_suspend_voltage(void);
-extern void pwm_resume_voltage(void);
-void rk30_pwm_suspend_voltage_set(void)
-{
-#ifdef CONFIG_RK30_PWM_REGULATOR
- pwm_suspend_voltage();
-#endif
-}
-void rk30_pwm_resume_voltage_set(void)
-{
-#ifdef CONFIG_RK30_PWM_REGULATOR
- pwm_resume_voltage();
-#endif
-}
-
-
-#ifdef CONFIG_I2C2_RK30
-static struct i2c_board_info __initdata i2c2_info[] = {
-#if defined (CONFIG_TOUCHSCREEN_GT8XX)
- {
- .type = "Goodix-TS",
- .addr = 0x55,
- .flags = 0,
- .irq = RK30_PIN0_PD4,
- .platform_data = &goodix_info,
- },
-#endif
-#if defined (CONFIG_TOUCHSCREEN_FT5306)
- {
- .type = "ft5x0x_ts",
- .addr = 0x38,
- .flags = 0,
- .irq = RK30_PIN0_PD4,
- .platform_data = &ft5x0x_info,
- },
-#endif
-#if defined (CONFIG_LS_CM3217)
- {
- .type = "lightsensor",
- .addr = 0x10,
- .flags = 0,
- .platform_data = &cm3217_info,
- },
-#endif
-};
-#endif
-
-#ifdef CONFIG_I2C3_RK30
-static struct i2c_board_info __initdata i2c3_info[] = {
-};
-#endif
-
-#ifdef CONFIG_I2C4_RK30
-static struct i2c_board_info __initdata i2c4_info[] = {
-};
-#endif
-
-#ifdef CONFIG_I2C_GPIO_RK30
-#define I2C_SDA_PIN INVALID_GPIO// RK30_PIN2_PD6 //set sda_pin here
-#define I2C_SCL_PIN INVALID_GPIO//RK30_PIN2_PD7 //set scl_pin here
-static int rk30_i2c_io_init(void)
-{
- //set iomux (gpio) here
- //rk30_mux_api_set(GPIO2D7_I2C1SCL_NAME, GPIO2D_GPIO2D7);
- //rk30_mux_api_set(GPIO2D6_I2C1SDA_NAME, GPIO2D_GPIO2D6);
-
- return 0;
-}
-struct i2c_gpio_platform_data default_i2c_gpio_data = {
- .sda_pin = I2C_SDA_PIN,
- .scl_pin = I2C_SCL_PIN,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(100),
- .bus_num = 5,
- .io_init = rk30_i2c_io_init,
-};
-static struct i2c_board_info __initdata i2c_gpio_info[] = {
-};
-#endif
-
-static void __init rk30_i2c_register_board_info(void)
-{
-#ifdef CONFIG_I2C0_RK30
- i2c_register_board_info(0, i2c0_info, ARRAY_SIZE(i2c0_info));
-#endif
-#ifdef CONFIG_I2C1_RK30
- i2c_register_board_info(1, i2c1_info, ARRAY_SIZE(i2c1_info));
-#endif
-#ifdef CONFIG_I2C2_RK30
- i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
-#endif
-#ifdef CONFIG_I2C3_RK30
- i2c_register_board_info(3, i2c3_info, ARRAY_SIZE(i2c3_info));
-#endif
-#ifdef CONFIG_I2C4_RK30
- i2c_register_board_info(4, i2c4_info, ARRAY_SIZE(i2c4_info));
-#endif
-#ifdef CONFIG_I2C_GPIO_RK30
- i2c_register_board_info(5, i2c_gpio_info, ARRAY_SIZE(i2c_gpio_info));
-#endif
-}
-//end of i2c
-
-#define POWER_ON_PIN RK30_PIN0_PA0 //power_hold
-static void rk30_pm_power_off(void)
-{
- printk(KERN_ERR "rk30_pm_power_off start...\n");
- gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
-#if defined(CONFIG_MFD_WM831X)
- wm831x_set_bits(Wm831x,WM831X_GPIO_LEVEL,0x0001,0x0000); //set sys_pwr 0
- wm831x_device_shutdown(Wm831x);//wm8326 shutdown
-#endif
- while (1);
-}
-
-static void __init machine_rk30_board_init(void)
-{
- //avs_init();
- gpio_request(POWER_ON_PIN, "poweronpin");
- gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
-
- pm_power_off = rk30_pm_power_off;
-
- rk30_i2c_register_board_info();
- spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
- platform_add_devices(devices, ARRAY_SIZE(devices));
- board_usb_detect_init(RK30_PIN0_PA7);
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- rk29sdk_wifi_bt_gpio_control_init();
-#endif
-}
-
-static void __init rk30_reserve(void)
-{
-#ifdef CONFIG_ION
- rk30_ion_pdata.heaps[0].base = board_mem_reserve_add("ion", ION_RESERVE_SIZE);
-#endif
-#ifdef CONFIG_FB_ROCKCHIP
- resource_fb[0].start = board_mem_reserve_add("fb0", RK30_FB0_MEM_SIZE);
- resource_fb[0].end = resource_fb[0].start + RK30_FB0_MEM_SIZE - 1;
- #if 0
- resource_fb[1].start = board_mem_reserve_add("ipp buf", RK30_FB0_MEM_SIZE);
- resource_fb[1].end = resource_fb[1].start + RK30_FB0_MEM_SIZE - 1;
- resource_fb[2].start = board_mem_reserve_add("fb2", RK30_FB0_MEM_SIZE);
- resource_fb[2].end = resource_fb[2].start + RK30_FB0_MEM_SIZE - 1;
- #endif
-#endif
-#ifdef CONFIG_VIDEO_RK29
- rk30_camera_request_reserve_mem();
-#endif
- board_mem_reserved();
-}
-
-/**
- * dvfs_cpu_logic_table: table for arm and logic dvfs
- * @frequency : arm frequency
- * @cpu_volt : arm voltage depend on frequency
- * @logic_volt : logic voltage arm requests depend on frequency
- * comments : min arm/logic voltage
- */
-static struct dvfs_arm_table dvfs_cpu_logic_table[] = {
-#if 0
- {.frequency = 252 * 1000, .cpu_volt = 1075 * 1000, .logic_volt = 1125 * 1000},//0.975V/1.000V
-#endif
- {.frequency = 504 * 1000, .cpu_volt = 975 * 1000, .logic_volt = 1000 * 1000},//0.975V/1.000V
- {.frequency = 816 * 1000, .cpu_volt = 1000 * 1000, .logic_volt = 1000 * 1000},//1.000V/1.025V
- {.frequency = 1200 * 1000, .cpu_volt = 1025 * 1000, .logic_volt = 1000 * 1000},//1.100V/1.050V
-#if 0
- {.frequency = 1008 * 1000, .cpu_volt = 1125 * 1000, .logic_volt = 1150 * 1000},//1.025V/1.050V
- {.frequency = 1272 * 1000, .cpu_volt = 1225 * 1000, .logic_volt = 1200 * 1000},//1.150V/1.100V
- {.frequency = 1416 * 1000, .cpu_volt = 1300 * 1000, .logic_volt = 1200 * 1000},//1.225V/1.100V
- {.frequency = 1512 * 1000, .cpu_volt = 1350 * 1000, .logic_volt = 1250 * 1000},//1.300V/1.150V
- {.frequency = 1608 * 1000, .cpu_volt = 1425 * 1000, .logic_volt = 1300 * 1000},//1.325V/1.175V
-#endif
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-static struct cpufreq_frequency_table dvfs_gpu_table[] = {
- {.frequency = 266 * 1000, .index = 1000 * 1000},
- {.frequency = 400 * 1000, .index = 1000 * 1000},
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-static struct cpufreq_frequency_table dvfs_ddr_table[] = {
- {.frequency = 300 * 1000, .index = 1000 * 1000},
- {.frequency = 400 * 1000, .index = 1000 * 1000},
- {.frequency = CPUFREQ_TABLE_END},
-};
-
-#define DVFS_CPU_TABLE_SIZE (ARRAY_SIZE(dvfs_cpu_logic_table))
-static struct cpufreq_frequency_table cpu_dvfs_table[DVFS_CPU_TABLE_SIZE];
-static struct cpufreq_frequency_table dep_cpu2core_table[DVFS_CPU_TABLE_SIZE];
-
-void __init board_clock_init(void)
-{
- rk30_clock_data_init(periph_pll_default, codec_pll_default, RK30_CLOCKS_DEFAULT_FLAGS);
- dvfs_set_arm_logic_volt(dvfs_cpu_logic_table, cpu_dvfs_table, dep_cpu2core_table);
- dvfs_set_freq_volt_table(clk_get(NULL, "gpu"), dvfs_gpu_table);
- dvfs_set_freq_volt_table(clk_get(NULL, "ddr"), dvfs_ddr_table);
-}
-
-MACHINE_START(RK30, "RK30board")
- .boot_params = PLAT_PHYS_OFFSET + 0x800,
- .fixup = rk30_fixup,
- .reserve = &rk30_reserve,
- .map_io = rk30_map_io,
- .init_irq = rk30_init_irq,
- .timer = &rk30_timer,
- .init_machine = machine_rk30_board_init,
-MACHINE_END
udelay(100);
ldo = regulator_get(NULL, "vdig2"); // vdd11
- regulator_set_voltage(ldo, 1000000, 1000000);
+ regulator_set_voltage(ldo, 1100000, 1100000);
regulator_enable(ldo);
printk("%s set vdig2 vdd11=%dmV end\n", __func__, regulator_get_voltage(ldo));
regulator_put(ldo);
udelay(100);
dcdc = regulator_get(NULL, "vdd_cpu"); //vdd_cpu
- regulator_set_voltage(dcdc, 1000000, 1000000);
+ regulator_set_voltage(dcdc, 1200000, 1200000);
regulator_enable(dcdc);
printk("%s set vdd1 vdd_cpu=%dmV end\n", __func__, regulator_get_voltage(dcdc));
regulator_put(dcdc);
gpio_free(BL_EN_PIN);
#endif
rk30_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- gpio_request(PWM_GPIO, NULL);
gpio_direction_output(PWM_GPIO, GPIO_LOW);
return ret;
}
{
ps_clksel1=force_cpu_hpclk_11(ps->clksel1);
}
+ else{
+ ps_clksel1=ps->clksel1;
+ }
//return form slow
//cru_writel(PLL_MODE_NORM(APLL_ID), CRU_MODE_CON);
//a/h/p clk sel
#ifdef CONFIG_I2C0_RK30
static struct rk30_i2c_platform_data default_i2c0_data = {
.bus_num = 0,
-#if defined(CONFIG_ARCH_RK3066B)
- .is_div_from_arm = 0,
-#else
.is_div_from_arm = 1,
-#endif
.adap_type = I2C0_ADAP_TYPE,
.check_idle = &i2c_check_idle,
};
#ifdef CONFIG_I2C1_RK30
static struct rk30_i2c_platform_data default_i2c1_data = {
.bus_num = 1,
-#if defined(CONFIG_ARCH_RK3066B)
- .is_div_from_arm = 0,
-#else
.is_div_from_arm = 1,
-#endif
.adap_type = I2C1_ADAP_TYPE,
.check_idle = &i2c_check_idle,
};
rk30_init_uart();
rk30_init_i2c();
rk30_init_spim();
+#ifdef CONFIG_MTD_NAND_RK29XX
+ platform_device_register(&device_nand);
+#endif
+#ifdef CONFIG_KEYS_RK29
+ platform_device_register(&device_keys);
+#endif
#ifdef CONFIG_RGA_RK30
platform_device_register(&device_rga);
#endif
#ifdef CONFIG_ADC_RK30
platform_device_register(&device_adc);
#endif
-#ifdef CONFIG_KEYS_RK29
- platform_device_register(&device_keys);
-#endif
#if !defined(CONFIG_ARCH_RK3066B)
platform_device_register(&device_tsadc);
#endif
platform_device_register(&device_wdt);
#endif
platform_device_register(&device_arm_pmu);
-#ifdef CONFIG_MTD_NAND_RK29XX
- platform_device_register(&device_nand);
-#endif
return 0;
}
#define __ASM_ARCH_CAMERA_RK30_H_
#if defined(CONFIG_ARCH_RK3066B)
-#define RK29_CAM_DRV_NAME "rk3066b-camera"
+#define RK29_CAM_DRV_NAME "rk-camera-rk3066b"
#define RK_SUPPORT_CIF0 1
#define RK_SUPPORT_CIF1 0
#elif defined(CONFIG_ARCH_RK30)
-#define RK29_CAM_DRV_NAME "rk30-camera"
+#define RK29_CAM_DRV_NAME "rk-camera-rk30"
#define RK_SUPPORT_CIF0 1
#define RK_SUPPORT_CIF1 1
#endif
#include <plat/rk_camera.h>
-#define CONFIG_CAMERA_INPUT_FMT_SUPPORT (RK_CAM_INPUT_FMT_YUV422)
#define CONFIG_CAMERA_SCALE_CROP_MACHINE RK_CAM_SCALE_CROP_IPP
#if (CONFIG_CAMERA_SCALE_CROP_MACHINE==RK_CAM_SCALE_CROP_ARM)
void (*exit_platform_hw)(void);
};
-struct ft5606_platform_data {
- int (*get_pendown_state)(void);
- int (*init_platform_hw)(void);
- int (*platform_sleep)(void);
- int (*platform_wakeup)(void);
- void (*exit_platform_hw)(void);
-};
struct akm8975_platform_data {
short m_layout[4][3][3];
#define RK_CAM_SCALE_CROP_RGA 2
#define RK_CAM_SCALE_CROP_PP 3
-#define RK_CAM_INPUT_FMT_YUV422 (1<<0)
-#define RK_CAM_INPUT_FMT_RAW10 (1<<1)
-#define RK_CAM_INPUT_FMT_RAW12 (1<<2)
-
/* v4l2_subdev_core_ops.ioctl ioctl_cmd macro */
#define RK29_CAM_SUBDEV_ACTIVATE 0x00
#define RK29_CAM_SUBDEV_DEACTIVATE 0x01
\r
.gpio_res = {\r
{\r
- #if CONFIG_SENSOR_IIC_ADDR_0 \r
.gpio_reset = CONFIG_SENSOR_RESET_PIN_0,\r
.gpio_power = CONFIG_SENSOR_POWER_PIN_0,\r
.gpio_powerdown = CONFIG_SENSOR_POWERDN_PIN_0,\r
.gpio_flag = (CONFIG_SENSOR_POWERACTIVE_LEVEL_0|CONFIG_SENSOR_RESETACTIVE_LEVEL_0|CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0|CONFIG_SENSOR_FLASHACTIVE_LEVEL_0),\r
.gpio_init = 0, \r
.dev_name = SENSOR_DEVICE_NAME_0,\r
- #else\r
- .gpio_reset = INVALID_GPIO,\r
- .gpio_power = INVALID_GPIO,\r
- .gpio_powerdown = INVALID_GPIO,\r
- .gpio_flash = INVALID_GPIO,\r
- .gpio_flag = 0,\r
- .gpio_init = 0, \r
- .dev_name = NULL,\r
- #endif\r
}, {\r
- #if CONFIG_SENSOR_IIC_ADDR_1 \r
.gpio_reset = CONFIG_SENSOR_RESET_PIN_1,\r
.gpio_power = CONFIG_SENSOR_POWER_PIN_1,\r
.gpio_powerdown = CONFIG_SENSOR_POWERDN_PIN_1,\r
.gpio_flag = (CONFIG_SENSOR_POWERACTIVE_LEVEL_1|CONFIG_SENSOR_RESETACTIVE_LEVEL_1|CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1|CONFIG_SENSOR_FLASHACTIVE_LEVEL_1),\r
.gpio_init = 0,\r
.dev_name = SENSOR_DEVICE_NAME_1,\r
- #else\r
- .gpio_reset = INVALID_GPIO,\r
- .gpio_power = INVALID_GPIO,\r
- .gpio_powerdown = INVALID_GPIO,\r
- .gpio_flash = INVALID_GPIO,\r
- .gpio_flag = 0,\r
- .gpio_init = 0, \r
- .dev_name = NULL,\r
- #endif\r
}, \r
#ifdef CONFIG_SENSOR_01\r
{\r
#define ENABLE_32BIT_BYPASS (0x01<<6)
#define DISABLE_32BIT_BYPASS (0x00<<6)
-
-#define MIN(x,y) ((x<y) ? x: y)
-#define MAX(x,y) ((x>y) ? x: y)
-#define RK_SENSOR_24MHZ 24*1000*1000 /* MHz */
-#define RK_SENSOR_48MHZ 48
-
-#define write_cif_reg(base,addr, val) __raw_writel(val, addr+(base))
-#define read_cif_reg(base,addr) __raw_readl(addr+(base))
-#define mask_cif_reg(addr, msk, val) write_cif_reg(addr, (val)|((~(msk))&read_cif_reg(addr)))
-
#if defined(CONFIG_ARCH_RK30)
//CRU,PIXCLOCK
#define CRU_PCLK_REG30 0xbc
#define MASK_RST_CIF1 (0x01 << 31)
#define RQUEST_RST_CIF0 (0x01 << 14)
#define RQUEST_RST_CIF1 (0x01 << 15)
+#endif
+#define MIN(x,y) ((x<y) ? x: y)
+#define MAX(x,y) ((x>y) ? x: y)
+#define RK_SENSOR_24MHZ 24*1000*1000 /* MHz */
+#define RK_SENSOR_48MHZ 48
+
+#define write_cif_reg(base,addr, val) __raw_writel(val, addr+(base))
+#define read_cif_reg(base,addr) __raw_readl(addr+(base))
+#define mask_cif_reg(addr, msk, val) write_cif_reg(addr, (val)|((~(msk))&read_cif_reg(addr)))
+
+#if defined(CONFIG_ARCH_RK30)
#define write_cru_reg(addr, val) __raw_writel(val, addr+RK30_CRU_BASE)
#define read_cru_reg(addr) __raw_readl(addr+RK30_CRU_BASE)
#define mask_cru_reg(addr, msk, val) write_cru_reg(addr,(val)|((~(msk))&read_cru_reg(addr)))
#endif
-#if defined(CONFIG_ARCH_RK3066B)
-//GRF_IO_CON3 0x100
-#define CIF_DRIVER_STRENGTH_2MA (0x00 << 12)
-#define CIF_DRIVER_STRENGTH_4MA (0x01 << 12)
-#define CIF_DRIVER_STRENGTH_8MA (0x02 << 12)
-#define CIF_DRIVER_STRENGTH_12MA (0x03 << 12)
-#define CIF_DRIVER_STRENGTH_MASK (0x03 << 28)
-
-//GRF_IO_CON4 0x104
-#define CIF_CLKOUT_AMP_3V3 (0x00 << 10)
-#define CIF_CLKOUT_AMP_1V8 (0x01 << 10)
-#define CIF_CLKOUT_AMP_MASK (0x01 << 26)
-
-#define write_grf_reg(addr, val) __raw_writel(val, addr+RK30_GRF_BASE)
-#define read_grf_reg(addr) __raw_readl(addr+RK30_GRF_BASE)
-#define mask_grf_reg(addr, msk, val) write_grf_reg(addr,(val)|((~(msk))&read_grf_reg(addr)))
-#else
-#define write_grf_reg(addr, val)
-#define read_grf_reg(addr) 0
-#define mask_grf_reg(addr, msk, val)
-#endif
-
#if defined(CONFIG_ARCH_RK2928)
#define write_cru_reg(addr, val)
#define read_cru_reg(addr) 0
3.fix bug in prob func:request mem twice.
4.video_vq may be null when reinit work,fix it
5.arm scale algorithm has something wrong(may exceed the bound of width or height) ,fix it.
-*v0.x.15:
-* 1. support rk3066b;
*/
-#define RK_CAM_VERSION_CODE KERNEL_VERSION(0, 2, 0x15)
+#define RK_CAM_VERSION_CODE KERNEL_VERSION(0, 2, 0x13)
/* limit to rk29 hardware capabilities */
#define RK_CAM_BUS_PARAM (SOCAM_MASTER |\
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct rk_camera_dev *pcdev = ici->priv;
-#if CAMERA_VIDEOBUF_ARM_ACCESS
struct rk29_camera_vbinfo *vb_info;
-#endif
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %zd\n", __func__,
vb, vb->baddr, vb->bsize);
struct soc_camera_device *icd = vq->priv_data;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct rk_camera_dev *pcdev = ici->priv;
-#if CAMERA_VIDEOBUF_ARM_ACCESS
struct rk29_camera_vbinfo *vb_info =NULL;
-#endif
-
#ifdef DEBUG
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
vb, vb->baddr, vb->bsize);
clk_disable(pcdev->cif_clk_out);
clk_disable(pcdev->pd_cif);
-
return;
}
goto ebusy;
}
- RKCAMERA_DG("%s driver attached to %s\n",RK29_CAM_DRV_NAME,dev_name(icd->pdev));
+ dev_info(&icd->dev, "RK Camera driver attached to camera%d(%s)\n",
+ icd->devnum,dev_name(icd->pdev));
pcdev->frame_inval = RK_CAM_FRAME_INVAL_INIT;
pcdev->active = NULL;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct rk_camera_dev *pcdev = ici->priv;
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
-#if CAMERA_VIDEOBUF_ARM_ACCESS
struct rk29_camera_vbinfo *vb_info;
unsigned int i;
-#endif
mutex_lock(&camera_lock);
BUG_ON(icd != pcdev->icd);
- RKCAMERA_DG("%s driver detached from %s\n",RK29_CAM_DRV_NAME,dev_name(icd->pdev));
+ dev_info(&icd->dev, "RK Camera driver detached from camera%d(%s)\n",
+ icd->devnum,dev_name(icd->pdev));
/* ddl@rock-chips.com: Application will call VIDIOC_STREAMOFF before close device, but
stream may be turn on again before close device, if suspend and resume happened. */
struct v4l2_crop a;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct rk_camera_dev *pcdev = ici->priv;
-#if CIF_DO_CROP
unsigned long tmp_cifctrl;
-#endif
+ int flags;
//change the crop and scale parameters
switch(cif_index){
case 0:
rk30_mux_api_set(GPIO3B3_CIFCLKOUT_NAME, GPIO3B_CIFCLKOUT);
- write_grf_reg(GRF_IO_CON3, (CIF_DRIVER_STRENGTH_MASK|CIF_DRIVER_STRENGTH_8MA));
- write_grf_reg(GRF_IO_CON4, (CIF_CLKOUT_AMP_MASK|CIF_CLKOUT_AMP_1V8));
- #if (CONFIG_CAMERA_INPUT_FMT_SUPPORT & (RK_CAM_INPUT_FMT_RAW10|RK_CAM_INPUT_FMT_RAW12))
- rk30_mux_api_set(GPIO3B4_CIFDATA0_HSADCDATA8_NAME, GPIO3B_CIFDATA0);
- rk30_mux_api_set(GPIO3B5_CIFDATA1_HSADCDATA9_NAME, GPIO3B_CIFDATA1);
- #endif
- #if (CONFIG_CAMERA_INPUT_FMT_SUPPORT & RK_CAM_INPUT_FMT_RAW12)
- rk30_mux_api_set(GPIO3B6_CIFDATA10_I2C3SDA_NAME, GPIO3B_CIFDATA10);
- rk30_mux_api_set(GPIO3B7_CIFDATA11_I2C3SCL_NAME, GPIO3B_CIFDATA11);
- RKCAMERA_TR("%s(%d): WARNING: Cif 0 is configurated that support RAW 12bit, so I2C3 is invalidate!!\n",__FUNCTION__,__LINE__);
- #endif
-
+ rk30_mux_api_set(GPIO3B4_CIFDATA0_HSADCDATA8_NAME, GPIO3B_CIFDATA0);
+ rk30_mux_api_set(GPIO3B5_CIFDATA1_HSADCDATA9_NAME, GPIO3B_CIFDATA1);
+ rk30_mux_api_set(GPIO3B6_CIFDATA10_I2C3SDA_NAME, GPIO3B_CIFDATA10);
+ rk30_mux_api_set(GPIO3B7_CIFDATA11_I2C3SCL_NAME, GPIO3B_CIFDATA11);
break;
default:
- RKCAMERA_TR("%s(%d): Cif index(%d) is invalidate!!!\n",__FUNCTION__,__LINE__, cif_index);
- break;
- }
+ printk("cif index is erro!!!\n");
+ }
#elif defined(CONFIG_ARCH_RK30)
switch(cif_index){
case 0:
rk30_mux_api_set(GPIO1B3_CIF0CLKOUT_NAME, GPIO1B_CIF0_CLKOUT);
- #if (CONFIG_CAMERA_INPUT_FMT_SUPPORT & (RK_CAM_INPUT_FMT_RAW10|RK_CAM_INPUT_FMT_RAW12))
- rk30_mux_api_set(GPIO1B4_CIF0DATA0_NAME, GPIO1B_CIF0_DATA0);
- rk30_mux_api_set(GPIO1B5_CIF0DATA1_NAME, GPIO1B_CIF0_DATA1);
- #endif
- #if (CONFIG_CAMERA_INPUT_FMT_SUPPORT & RK_CAM_INPUT_FMT_RAW12)
- rk30_mux_api_set(GPIO1B6_CIFDATA10_NAME, GPIO1B_CIF_DATA10);
- rk30_mux_api_set(GPIO1B7_CIFDATA11_NAME, GPIO1B_CIF_DATA11);
- #endif
break;
case 1:
rk30_mux_api_set(GPIO1C0_CIF1DATA2_RMIICLKOUT_RMIICLKIN_NAME,GPIO1C_CIF1_DATA2);
rk30_mux_api_set(GPIO1D7_CIF1CLKOUT_NAME,GPIO1D_CIF1_CLKOUT);
break;
default:
- RKCAMERA_TR("%s(%d): Cif index(%d) is invalidate!!!\n",__FUNCTION__,__LINE__, cif_index);
- break;
+ printk("cif index is erro!!!\n");
}
+#else
#endif
struct rk29camera_mem_res *meminfo_ptr,*meminfo_ptrr;
int irq,i;
int err = 0;
+ static int ipp_mem = 0;
- printk("%s version: v%d.%d.%d Zoom by %s\n",RK29_CAM_DRV_NAME,(RK_CAM_VERSION_CODE&0xff0000)>>16,
- (RK_CAM_VERSION_CODE&0xff00)>>8,RK_CAM_VERSION_CODE&0xff,CAMERA_SCALE_CROP_MACHINE);
+ RKCAMERA_DG("%s(%d) Enter..\n",__FUNCTION__,__LINE__);
if ((pdev->id == RK_CAM_PLATFORM_DEV_ID_1) && (RK_SUPPORT_CIF1 == 0)) {
RKCAMERA_TR("%s(%d): This chip is not support CIF1!!\n",__FUNCTION__,__LINE__);
}
meminfo_ptr->vbase = pcdev->vipmem_virbase = ioremap_cached(meminfo_ptr->start,meminfo_ptr->size);
if (pcdev->vipmem_virbase == NULL) {
- RKCAMERA_TR("%s(%d): ioremap of CIF internal memory(Ex:IPP process/raw process) failed\n",__FUNCTION__,__LINE__);
+ dev_err(pcdev->dev, "ioremap() of vip internal memory(Ex:IPP process/raw process) failed\n");
err = -ENXIO;
goto exit_ioremap_vipmem;
}
static int rk_camera_init_async(void *unused)
{
+ RKCAMERA_DG("%s..%s..%d \n",__FUNCTION__,__FILE__,__LINE__);
platform_driver_register(&rk_camera_driver);
return 0;
}
soc_camera_power_set(icd, icl, 0);
mutex_unlock(&icd->video_lock);
- printk("Probe %s success\n", dev_name(icd->pdev));
+ dev_info(dev, "Probe %s success\n", dev_name(icd->pdev));
return 0;
evidstart:
#include <linux/err.h>
#include <linux/slab.h>
-#if defined(CONFIG_ARCH_RK3066B)
-#define RK610_RESET_PIN RK30_PIN2_PC5
-#elif defined(CONFIG_ARCH_RK30)
+#ifdef CONFIG_ARCH_RK30
#define RK610_RESET_PIN RK30_PIN0_PC6
#else
#define RK610_RESET_PIN RK29_PIN6_PC1
return -ENOMEM;
}
memset(core_info, 0, sizeof(struct rk610_core_info));
- #if defined(CONFIG_SND_RK29_SOC_I2S_8CH)
- iis_clk = clk_get_sys("rk29_i2s.0", "i2s");
- #elif defined(CONFIG_SND_RK29_SOC_I2S_2CH)
- iis_clk = clk_get_sys("rk29_i2s.1", "i2s");
- #else
- iis_clk = clk_get_sys("rk29_i2s.2", "i2s");
- #endif
+
+ iis_clk = clk_get_sys("rk29_i2s.0", "i2s");
if (IS_ERR(iis_clk)) {
printk("failed to get i2s clk\n");
ret = PTR_ERR(iis_clk);
DBG("got i2s clk ok!\n");
clk_enable(iis_clk);
clk_set_rate(iis_clk, 11289600);
- #if defined(CONFIG_ARCH_RK29)
+ #ifdef CONFIG_ARCH_RK29
rk29_mux_api_set(GPIO2D0_I2S0CLK_MIIRXCLKIN_NAME, GPIO2H_I2S0_CLK);
- #elif defined(CONFIG_ARCH_RK3066B)
- rk30_mux_api_set(GPIO1C0_I2SCLK_NAME, GPIO1C_I2SCLK);
- #elif defined(CONFIG_ARCH_RK30)
- rk30_mux_api_set(GPIO0B0_I2S8CHCLK_NAME, GPIO0B_I2S_8CH_CLK);
+ #else
+ rk30_mux_api_set(GPIO0B0_I2S8CHCLK_NAME, GPIO0B_I2S_8CH_CLK);
#endif
clk_put(iis_clk);
}
help
Support the voltage and current regulators of the ACT8891 series of PMIC devices.
-config REGULATOR_ACT8931
- tristate "Active Semi ACT8931 PMIC regulators"
- depends on I2C
- help
- Support the voltage and current regulators of the ACT8931 series of PMIC devices.
-
config RK29_PWM_REGULATOR
tristate "rk2918 pwm voltage regulator"
help
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
obj-$(CONFIG_REGULATOR_ACT8891) += act8891.o
-obj-$(CONFIG_REGULATOR_ACT8931) += act8931.o
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
+++ /dev/null
-/*
- * Regulator driver for Active-semi act8931 PMIC chip for rk29xx
- *
- * Copyright (C) 2010, 2011 ROCKCHIP, Inc.
-
- * Based on act8891.c that is work by zhangqing<zhangqing@rock-chips.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/bug.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/kernel.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/act8931.h>
-#include <mach/gpio.h>
-#include <linux/delay.h>
-#include <mach/iomux.h>
-#include <linux/slab.h>
-
-#if 0
-#define DBG(x...) printk(KERN_INFO x)
-#else
-#define DBG(x...)
-#endif
-#if 1
-#define DBG_INFO(x...) printk(KERN_INFO x)
-#else
-#define DBG_INFO(x...)
-#endif
-#define PM_CONTROL
-
-struct act8931 {
- struct device *dev;
- struct mutex io_lock;
- struct i2c_client *i2c;
- int num_regulators;
- struct regulator_dev **rdev;
-};
-
-static u8 act8931_reg_read(struct act8931 *act8931, u8 reg);
-static int act8931_set_bits(struct act8931 *act8931, u8 reg, u16 mask, u16 val);
-
-
-#define act8931_BUCK1_SET_VOL_BASE 0x20
-#define act8931_BUCK2_SET_VOL_BASE 0x30
-#define act8931_BUCK3_SET_VOL_BASE 0x40
-#define act8931_LDO1_SET_VOL_BASE 0x50
-#define act8931_LDO2_SET_VOL_BASE 0x54
-#define act8931_LDO3_SET_VOL_BASE 0x60
-#define act8931_LDO4_SET_VOL_BASE 0x64
-
-#define act8931_BUCK1_CONTR_BASE 0x22
-#define act8931_BUCK2_CONTR_BASE 0x32
-#define act8931_BUCK3_CONTR_BASE 0x42
-#define act8931_LDO1_CONTR_BASE 0x51
-#define act8931_LDO2_CONTR_BASE 0x55
-#define act8931_LDO3_CONTR_BASE 0x61
-#define act8931_LDO4_CONTR_BASE 0x65
-
-#define BUCK_VOL_MASK 0x3f
-#define LDO_VOL_MASK 0x3f
-
-#define VOL_MIN_IDX 0x00
-#define VOL_MAX_IDX 0x3f
-
-const static int buck_set_vol_base_addr[] = {
- act8931_BUCK1_SET_VOL_BASE,
- act8931_BUCK2_SET_VOL_BASE,
- act8931_BUCK3_SET_VOL_BASE,
-};
-const static int buck_contr_base_addr[] = {
- act8931_BUCK1_CONTR_BASE,
- act8931_BUCK2_CONTR_BASE,
- act8931_BUCK3_CONTR_BASE,
-};
-#define act8931_BUCK_SET_VOL_REG(x) (buck_set_vol_base_addr[x])
-#define act8931_BUCK_CONTR_REG(x) (buck_contr_base_addr[x])
-
-
-const static int ldo_set_vol_base_addr[] = {
- act8931_LDO1_SET_VOL_BASE,
- act8931_LDO2_SET_VOL_BASE,
- act8931_LDO3_SET_VOL_BASE,
- act8931_LDO4_SET_VOL_BASE,
-};
-const static int ldo_contr_base_addr[] = {
- act8931_LDO1_CONTR_BASE,
- act8931_LDO2_CONTR_BASE,
- act8931_LDO3_CONTR_BASE,
- act8931_LDO4_CONTR_BASE,
-};
-#define act8931_LDO_SET_VOL_REG(x) (ldo_set_vol_base_addr[x])
-#define act8931_LDO_CONTR_REG(x) (ldo_contr_base_addr[x])
-
-const static int buck_voltage_map[] = {
- 600, 625, 650, 675, 700, 725, 750, 775,
- 800, 825, 850, 875, 900, 925, 950, 975,
- 1000, 1025, 1050, 1075, 1100, 1125, 1150,
- 1175, 1200, 1250, 1300, 1350, 1400, 1450,
- 1500, 1550, 1600, 1650, 1700, 1750, 1800,
- 1850, 1900, 1950, 2000, 2050, 2100, 2150,
- 2200, 2250, 2300, 2350, 2400, 2500, 2600,
- 2700, 2800, 2850, 2900, 3000, 3100, 3200,
- 3300, 3400, 3500, 3600, 3700, 3800, 3900,
-};
-
-const static int ldo_voltage_map[] = {
- 600, 625, 650, 675, 700, 725, 750, 775,
- 800, 825, 850, 875, 900, 925, 950, 975,
- 1000, 1025, 1050, 1075, 1100, 1125, 1150,
- 1175, 1200, 1250, 1300, 1350, 1400, 1450,
- 1500, 1550, 1600, 1650, 1700, 1750, 1800,
- 1850, 1900, 1950, 2000, 2050, 2100, 2150,
- 2200, 2250, 2300, 2350, 2400, 2500, 2600,
- 2700, 2800, 2850, 2900, 3000, 3100, 3200,
- 3300, 3400, 3500, 3600, 3700, 3800, 3900,
-};
-
-static int act8931_ldo_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- return 1000 * ldo_voltage_map[index];
-}
-static int act8931_ldo_is_enabled(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev) -ACT8931_LDO1;
- u16 val;
- u16 mask=0x80;
- val = act8931_reg_read(act8931, act8931_LDO_CONTR_REG(ldo));
- if (val < 0)
- return val;
- val=val&~0x7f;
- if (val & mask)
- return 1;
- else
- return 0;
-}
-static int act8931_ldo_enable(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo= rdev_get_id(dev) -ACT8931_LDO1;
- u16 mask=0x80;
- int ret;
- return act8931_set_bits(act8931, act8931_LDO_CONTR_REG(ldo), mask, 0x80);
-
-}
-static int act8931_ldo_disable(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo= rdev_get_id(dev) -ACT8931_LDO1;
- u16 mask=0x80;
- int ret;
- return act8931_set_bits(act8931, act8931_LDO_CONTR_REG(ldo), mask, 0);
-
-}
-static int act8931_ldo_get_voltage(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo= rdev_get_id(dev) -ACT8931_LDO1;
- u16 reg = 0;
- int val;
- reg = act8931_reg_read(act8931,act8931_LDO_SET_VOL_REG(ldo));
- reg &= LDO_VOL_MASK;
- val = 1000 * ldo_voltage_map[reg];
- return val;
-}
-static int act8931_ldo_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo= rdev_get_id(dev) -ACT8931_LDO1;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const int *vol_map =ldo_voltage_map;
- u16 val;
- int ret = 0;
- if (min_vol < vol_map[VOL_MIN_IDX] ||
- min_vol > vol_map[VOL_MAX_IDX])
- return -EINVAL;
-
- for (val = VOL_MIN_IDX; val <= VOL_MAX_IDX;
- val++){
- if (vol_map[val] >= min_vol)
- break; }
-
- if (vol_map[val] > max_vol)
- return -EINVAL;
-
- ret = act8931_set_bits(act8931, act8931_LDO_SET_VOL_REG(ldo),
- LDO_VOL_MASK, val);
- if (ret)
- return ret;
-
-}
-static int act8931_ldo_get_mode(struct regulator_dev *dev, unsigned index)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev) -ACT8931_LDO1 ;
- u16 mask = 0xcf;
- u16 val;
- val = act8931_reg_read(act8931, act8931_LDO_CONTR_REG(ldo));
- val=val|mask;
- if (val== mask)
- return REGULATOR_MODE_NORMAL;
- else
- return REGULATOR_MODE_STANDBY;
-
-}
-static int act8931_ldo_set_mode(struct regulator_dev *dev, unsigned int mode)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev) -ACT8931_LDO1 ;
- u16 mask = 0x20;
- switch(mode)
- {
- case REGULATOR_MODE_NORMAL:
- return act8931_set_bits(act8931, act8931_LDO_CONTR_REG(ldo), mask, 0);
- case REGULATOR_MODE_STANDBY:
- return act8931_set_bits(act8931, act8931_LDO_CONTR_REG(ldo), mask, mask);
- default:
- printk("error:pmu_act8931 only lowpower and nomal mode\n");
- return -EINVAL;
- }
-
-
-}
-static struct regulator_ops act8931_ldo_ops = {
- .set_voltage = act8931_ldo_set_voltage,
- .get_voltage = act8931_ldo_get_voltage,
- .list_voltage = act8931_ldo_list_voltage,
- .is_enabled = act8931_ldo_is_enabled,
- .enable = act8931_ldo_enable,
- .disable = act8931_ldo_disable,
- .get_mode = act8931_ldo_get_mode,
- .set_mode = act8931_ldo_set_mode,
-
-};
-
-static int act8931_dcdc_list_voltage(struct regulator_dev *dev, unsigned index)
-{
- return 1000 * buck_voltage_map[index];
-}
-static int act8931_dcdc_is_enabled(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1;
- u16 val;
- u16 mask=0x80;
- val = act8931_reg_read(act8931, act8931_BUCK_CONTR_REG(buck));
- if (val < 0)
- return val;
- val=val&~0x7f;
- if (val & mask)
- return 1;
- else
- return 0;
-}
-static int act8931_dcdc_enable(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- u16 mask=0x80;
- return act8931_set_bits(act8931, act8931_BUCK_CONTR_REG(buck), mask, 0x80);
-
-}
-static int act8931_dcdc_disable(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- u16 mask=0x80;
- return act8931_set_bits(act8931, act8931_BUCK_CONTR_REG(buck), mask, 0);
-}
-static int act8931_dcdc_get_voltage(struct regulator_dev *dev)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- u16 reg = 0;
- int val;
- reg = act8931_reg_read(act8931,act8931_BUCK_SET_VOL_REG(buck));
- reg &= BUCK_VOL_MASK;
- DBG("%d\n", reg);
- val = 1000 * buck_voltage_map[reg];
- DBG("%d\n", val);
- return val;
-}
-static int act8931_dcdc_set_voltage(struct regulator_dev *dev,
- int min_uV, int max_uV)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
- const int *vol_map = buck_voltage_map;
- u16 val;
- int ret = 0;
-
- DBG("%s, min_uV = %d, max_uV = %d!\n", __func__, min_uV, max_uV);
- if (min_vol < vol_map[VOL_MIN_IDX] ||
- min_vol > vol_map[VOL_MAX_IDX])
- return -EINVAL;
-
- for (val = VOL_MIN_IDX; val <= VOL_MAX_IDX;
- val++){
- if (vol_map[val] >= min_vol)
- break;}
-
- if (vol_map[val] > max_vol)
- return -EINVAL;
- ret = act8931_set_bits(act8931, act8931_BUCK_SET_VOL_REG(buck),
- BUCK_VOL_MASK, val);
- ret = act8931_set_bits(act8931, act8931_BUCK_SET_VOL_REG(buck) + 0x01,
- BUCK_VOL_MASK, val);
- //if (ret)
- return ret;
-}
-static int act8931_dcdc_get_mode(struct regulator_dev *dev, unsigned index)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- u16 mask = 0xcf;
- u16 val;
- val = act8931_reg_read(act8931, act8931_BUCK_CONTR_REG(buck));
- val=val|mask;
- if (val== mask)
- return REGULATOR_MODE_STANDBY;
- else
- return REGULATOR_MODE_NORMAL;
-
-}
-static int act8931_dcdc_set_mode(struct regulator_dev *dev, unsigned int mode)
-{
- struct act8931 *act8931 = rdev_get_drvdata(dev);
- int buck = rdev_get_id(dev) -ACT8931_DCDC1 ;
- u16 mask = 0x20;
- switch(mode)
- {
- case REGULATOR_MODE_STANDBY:
- return act8931_set_bits(act8931, act8931_BUCK_CONTR_REG(buck), mask, 0);
- case REGULATOR_MODE_NORMAL:
- return act8931_set_bits(act8931, act8931_BUCK_CONTR_REG(buck), mask, mask);
- default:
- printk("error:pmu_act8931 only powersave and pwm mode\n");
- return -EINVAL;
- }
-
-
-}
-static struct regulator_ops act8931_dcdc_ops = {
- .set_voltage = act8931_dcdc_set_voltage,
- .get_voltage = act8931_dcdc_get_voltage,
- .list_voltage= act8931_dcdc_list_voltage,
- .is_enabled = act8931_dcdc_is_enabled,
- .enable = act8931_dcdc_enable,
- .disable = act8931_dcdc_disable,
- .get_mode = act8931_dcdc_get_mode,
- .set_mode = act8931_dcdc_set_mode,
-};
-static struct regulator_desc regulators[] = {
- {
- .name = "ACT_LDO1",
- .id =0,
- .ops = &act8931_ldo_ops,
- .n_voltages = ARRAY_SIZE(ldo_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "ACT_LDO2",
- .id = 1,
- .ops = &act8931_ldo_ops,
- .n_voltages = ARRAY_SIZE(ldo_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "ACT_LDO3",
- .id = 2,
- .ops = &act8931_ldo_ops,
- .n_voltages = ARRAY_SIZE(ldo_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "ACT_LDO4",
- .id = 3,
- .ops = &act8931_ldo_ops,
- .n_voltages = ARRAY_SIZE(ldo_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
-
- {
- .name = "ACT_DCDC1",
- .id = 4,
- .ops = &act8931_dcdc_ops,
- .n_voltages = ARRAY_SIZE(buck_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "ACT_DCDC2",
- .id = 5,
- .ops = &act8931_dcdc_ops,
- .n_voltages = ARRAY_SIZE(buck_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
- {
- .name = "ACT_DCDC3",
- .id = 6,
- .ops = &act8931_dcdc_ops,
- .n_voltages = ARRAY_SIZE(buck_voltage_map),
- .type = REGULATOR_VOLTAGE,
- .owner = THIS_MODULE,
- },
-
-};
-
-/*
- *
- */
-static int act8931_i2c_read(struct i2c_client *i2c, char reg, int count, u16 *dest)
-{
- int ret;
- struct i2c_adapter *adap;
- struct i2c_msg msgs[2];
-
- if(!i2c)
- return ret;
-
- if (count != 1)
- return -EIO;
-
- adap = i2c->adapter;
-
- msgs[0].addr = i2c->addr;
- msgs[0].buf = ®
- msgs[0].flags = i2c->flags;
- msgs[0].len = 1;
- msgs[0].scl_rate = 200*1000;
-
- msgs[1].buf = dest;
- msgs[1].addr = i2c->addr;
- msgs[1].flags = i2c->flags | I2C_M_RD;
- msgs[1].len = 1;
- msgs[1].scl_rate = 200*1000;
- ret = i2c_transfer(adap, msgs, 2);
-
- DBG("***run in %s %d msgs[1].buf = %d\n",__FUNCTION__,__LINE__,*(msgs[1].buf));
-
- return 0;
-}
-
-static int act8931_i2c_write(struct i2c_client *i2c, char reg, int count, const u16 src)
-{
- int ret=-1;
-
- struct i2c_adapter *adap;
- struct i2c_msg msg;
- char tx_buf[2];
-
- if(!i2c)
- return ret;
- if (count != 1)
- return -EIO;
-
- adap = i2c->adapter;
- tx_buf[0] = reg;
- tx_buf[1] = src;
-
- msg.addr = i2c->addr;
- msg.buf = &tx_buf[0];
- msg.len = 1 +1;
- msg.flags = i2c->flags;
- msg.scl_rate = 200*1000;
-
- ret = i2c_transfer(adap, &msg, 1);
- return 0;
-}
-
-static u8 act8931_reg_read(struct act8931 *act8931, u8 reg)
-{
- u16 val = 0;
-
- mutex_lock(&act8931->io_lock);
-
- act8931_i2c_read(act8931->i2c, reg, 1, &val);
-
- DBG("reg read 0x%02x -> 0x%02x\n", (int)reg, (unsigned)val&0xff);
-
- mutex_unlock(&act8931->io_lock);
-
- return val & 0xff;
-}
-
-static int act8931_set_bits(struct act8931 *act8931, u8 reg, u16 mask, u16 val)
-{
- u16 tmp;
- int ret;
-
- mutex_lock(&act8931->io_lock);
-
- ret = act8931_i2c_read(act8931->i2c, reg, 1, &tmp);
- DBG("1 reg read 0x%02x -> 0x%02x\n", (int)reg, (unsigned)tmp&0xff);
- tmp = (tmp & ~mask) | val;
- if (ret == 0) {
- ret = act8931_i2c_write(act8931->i2c, reg, 1, tmp);
- DBG("reg write 0x%02x -> 0x%02x\n", (int)reg, (unsigned)val&0xff);
- }
- act8931_i2c_read(act8931->i2c, reg, 1, &tmp);
- DBG("2 reg read 0x%02x -> 0x%02x\n", (int)reg, (unsigned)tmp&0xff);
- mutex_unlock(&act8931->io_lock);
-
- return ret;
-}
-static int __devinit setup_regulators(struct act8931 *act8931, struct act8931_platform_data *pdata)
-{
- int i, err;
-
- act8931->num_regulators = pdata->num_regulators;
- act8931->rdev = kcalloc(pdata->num_regulators,
- sizeof(struct regulator_dev *), GFP_KERNEL);
- if (!act8931->rdev) {
- return -ENOMEM;
- }
- /* Instantiate the regulators */
- for (i = 0; i < pdata->num_regulators; i++) {
- int id = pdata->regulators[i].id;
- act8931->rdev[i] = regulator_register(®ulators[id],
- act8931->dev, pdata->regulators[i].initdata, act8931);
-/*
- if (IS_ERR(act8931->rdev[i])) {
- err = PTR_ERR(act8931->rdev[i]);
- dev_err(act8931->dev, "regulator init failed: %d\n",
- err);
- goto error;
- }*/
- }
-
- return 0;
-error:
- while (--i >= 0)
- regulator_unregister(act8931->rdev[i]);
- kfree(act8931->rdev);
- act8931->rdev = NULL;
- return err;
-}
-
-static int __devinit act8931_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
-{
- struct act8931 *act8931;
- struct act8931_platform_data *pdata = i2c->dev.platform_data;
- int ret;
- act8931 = kzalloc(sizeof(struct act8931), GFP_KERNEL);
- if (act8931 == NULL) {
- ret = -ENOMEM;
- goto err;
- }
- act8931->i2c = i2c;
- act8931->dev = &i2c->dev;
- i2c_set_clientdata(i2c, act8931);
- mutex_init(&act8931->io_lock);
-
- if (pdata) {
- ret = setup_regulators(act8931, pdata);
- if (ret < 0)
- goto err;
- } else
- dev_warn(act8931->dev, "No platform init data supplied\n");
-
- pdata->set_init(act8931);
-
- return 0;
-
-err:
- return ret;
-
-}
-
-static int __devexit act8931_i2c_remove(struct i2c_client *i2c)
-{
- struct act8931 *act8931 = i2c_get_clientdata(i2c);
- int i;
-
- for (i = 0; i < act8931->num_regulators; i++)
- if (act8931->rdev[i])
- regulator_unregister(act8931->rdev[i]);
- kfree(act8931->rdev);
- i2c_set_clientdata(i2c, NULL);
- kfree(act8931);
-
- return 0;
-}
-
-static const struct i2c_device_id act8931_i2c_id[] = {
- { "act8931", 0 },
- { }
-};
-
-MODULE_DEVICE_TABLE(i2c, act8931_i2c_id);
-
-static struct i2c_driver act8931_i2c_driver = {
- .driver = {
- .name = "act8931",
- .owner = THIS_MODULE,
- },
- .probe = act8931_i2c_probe,
- .remove = __devexit_p(act8931_i2c_remove),
- .id_table = act8931_i2c_id,
-};
-
-static int __init act8931_module_init(void)
-{
- int ret;
- ret = i2c_add_driver(&act8931_i2c_driver);
- if (ret != 0)
- pr_err("Failed to register I2C driver: %d\n", ret);
- return ret;
-}
-//module_init(act8931_module_init);
-//subsys_initcall(act8931_module_init);
-//rootfs_initcall(act8931_module_init);
-subsys_initcall_sync(act8931_module_init);
-
-static void __exit act8931_module_exit(void)
-{
- i2c_del_driver(&act8931_i2c_driver);
-}
-module_exit(act8931_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("xhc <xhc@rock-chips.com>");
-MODULE_DESCRIPTION("act8931 PMIC driver");
-
-
core_if->srp_success = 0;
core_if->srp_timer_started = 0;
+ core_if->usb_wakeup = 0;
// if(dwc_core_if == NULL)
dwc_core_if = core_if;
return core_if;
DWC_PRINT("_______________________dwc_otg flags_______________________________\n");
DWC_PRINT("core_if->op_state = %x\n",_core_if->op_state);
DWC_PRINT("core_if->usb_mode = %x\n",_core_if->usb_mode);
+ DWC_PRINT("core_if->usb_wakeup = %x\n",_core_if->usb_wakeup);
}
#ifndef CONFIG_DWC_OTG_HOST_ONLY
uint16_t rx_fifo_size;
/** Size of Non-periodic Tx FIFO (Bytes) */
uint16_t nperio_tx_fifo_size;
-
+
+ /** 1 if wakeup in system sleep mode, 0 otherwise */
+ uint8_t usb_wakeup;
+
/** 1 if DMA is enabled, 0 otherwise. */
uint8_t dma_enable;
printk("dwc_otg_force_host,already in A_HOST mode,everest\n");
return;
}
+ if(pldata->phy_suspend)
+ pldata->phy_suspend(pldata,USB_PHY_ENABLED);
del_timer(&otg_dev->pcd->check_vbus_timer);
// force disconnect
/* soft disconnect */
otg_dev->core_if->op_state = B_PERIPHERAL;
/* Reset the Controller */
dwc_otg_core_reset( core_if );
+ //otg_dev->pcd->phy_suspend = 1;
otg_dev->pcd->vbus_status = 0;
dwc_otg_pcd_start_vbus_timer( otg_dev->pcd );
{
return _count;
}
-
- if(pldata->phy_status==USB_PHY_SUSPEND){
- pldata->clock_enable(pldata, 1);
- pldata->phy_suspend(pldata,USB_PHY_ENABLED);
- }
switch(new_mode)
{
if(USB_MODE_FORCE_DEVICE == core_if->usb_mode)
{
core_if->usb_mode = new_mode;
+ if(pldata->phy_suspend)
+ pldata->phy_suspend(pldata,USB_PHY_ENABLED);
del_timer(&otg_dev->pcd->check_vbus_timer);
dwc_otg_set_gusbcfg(core_if, new_mode);
msleep(50);
}
else if(USB_MODE_FORCE_HOST == core_if->usb_mode)
{
+ if(pldata->phy_suspend)
+ pldata->phy_suspend(pldata,USB_PHY_ENABLED);
core_if->usb_mode = new_mode;
dwc_otg_set_gusbcfg(core_if, new_mode);
msleep(100);
if (_core_if->hcd_cb && _core_if->hcd_cb->stop) {
_core_if->hcd_cb->stop( _core_if->hcd_cb->p );
}
- if(pldata->phy_status==USB_PHY_ENABLED){
+ if(pldata->phy_suspend)
pldata->phy_suspend(pldata,USB_PHY_SUSPEND);
- udelay(3);
- pldata->clock_enable(pldata, 0);
- }
+ udelay(3);
+ pldata->clock_enable(pldata, 0);
}
else if(val == 1)
{
DWC_PRINT("enable host controller:%s\n",pdev->name);
- if( pldata->phy_status == USB_PHY_SUSPEND ){
- pldata->clock_enable( pldata, 1);
- pldata->phy_suspend(pldata, USB_PHY_ENABLED);
- }
+ pldata->clock_enable(pldata, 1);
+ pldata->phy_suspend(pldata,USB_PHY_ENABLED);
mdelay(5);
if (_core_if->hcd_cb && _core_if->hcd_cb->start) {
_core_if->hcd_cb->start( _core_if->hcd_cb->p );
struct dwc_otg_platform_data *pldata = dev->platform_data;
// clock and hw init
- if(pldata->hw_init)
- pldata->hw_init();
-
if(pldata->soft_reset)
pldata->soft_reset();
pldata->clock_enable(pldata, 1);
}
+ if(pldata->hw_init)
+ pldata->hw_init();
if(pldata->phy_suspend)
pldata->phy_suspend(pldata, USB_PHY_ENABLED);
/* Clear any pending interrupts */
dwc_write_reg32( &core_if->core_global_regs->gintsts, 0xFFFFFFFF);
dwc_otg_disable_global_interrupts(core_if);
- if( pldata->phy_status == 0 ){
- /* no vbus detect here , close usb phy */
- pldata->phy_suspend(pldata, USB_PHY_SUSPEND);
- udelay(3);
- pldata->clock_enable( pldata, 0);
- }
-// del_timer(&otg_dev->pcd->check_vbus_timer);
+ pldata->phy_suspend(pldata,USB_PHY_SUSPEND);
+ del_timer(&otg_dev->pcd->check_vbus_timer);
return 0;
}
DWC_PRINT("%s,A_HOST mode\n", __func__);
return 0;
}
+#ifndef CONFIG_DWC_OTG_HOST_ONLY
+
+ pldata->phy_suspend(pldata,USB_PHY_ENABLED);
+
+ /* soft disconnect */
+ /* 20100226,HSL@RK,if not disconnect,when usb cable in,will auto reconnect
+ * besause now USB PHY is enable,and get USB RESET irq.
+ */
+ /* soft disconnect */
+ dctl.d32 = dwc_read_reg32( &core_if->dev_if->dev_global_regs->dctl );
+ dctl.b.sftdiscon = 1;
+ dwc_write_reg32( &core_if->dev_if->dev_global_regs->dctl, dctl.d32 );
+
+ /* Clear any pending interrupts */
+ dwc_write_reg32( &global_regs->gintsts, 0xeFFFFFFF);
+
+ dwc_otg_enable_global_interrupts(core_if);
+ mod_timer(&otg_dev->pcd->check_vbus_timer , jiffies + HZ);
+
+//sendwakeup:
+ if(core_if->usb_wakeup)
+ {
+ core_if->usb_wakeup = 0;
+ }
+ DWC_PRINT("%s gahbcfg:0x%x\n", __func__, global_regs->gahbcfg);
+#endif
return 0;
}
struct dwc_otg_platform_data *pldata = dev->platform_data;
// clock and hw init
- if(pldata->hw_init)
- pldata->hw_init();
-
if(pldata->soft_reset)
pldata->soft_reset();
pldata->clock_enable(pldata, 1);
}
+ if(pldata->hw_init)
+ pldata->hw_init();
if(pldata->phy_suspend)
pldata->phy_suspend(pldata, USB_PHY_ENABLED);
/*
DWC_PRINT("%s, usb device mode\n", __func__);
return 0;
}
- if(!(dwc_otg_hcd->host_enabled&1))
+ if(!dwc_otg_hcd->host_enabled)
return 0;
hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0);
#ifdef CONFIG_USB_SUSPEND
return 0;
}
//#ifdef CONFIG_USB_SUSPEND
- if(!(dwc_otg_hcd->host_enabled&1))
+ if(!dwc_otg_hcd->host_enabled)
return 0;
//#endif
#ifndef CONFIG_DWC_REMOTE_WAKEUP
}
dwc_otg_hcd->host_enabled = dwc_otg_hcd->host_setenable;
- if(dwc_otg_hcd->host_setenable == 2) // enable -> disable
+ if(dwc_otg_hcd->host_setenable == 0) // enable -> disable
{
DWC_PRINT("%s, disable host controller\n", __func__);
#if 1
else{
// no device, suspend host
if((dwc_read_reg32(core_if->host_if->hprt0) & 1) == 0)
- dwc_otg_hcd->host_setenable = 2;
+ dwc_otg_hcd->host_setenable = 0;
}
- if((dwc_otg_hcd->host_enabled)&&(dwc_otg_hcd->host_setenable != dwc_otg_hcd->host_enabled)){
- schedule_delayed_work(&dwc_otg_hcd->host_enable_work, 8);
+ if(dwc_otg_hcd->host_setenable != dwc_otg_hcd->host_enabled){
+ schedule_delayed_work(&dwc_otg_hcd->host_enable_work, 8);
}
// dwc_otg_hcd->connect_detect_timer.expires = jiffies + (HZ<<1); /* 1 s */
mod_timer(&dwc_otg_hcd->connect_detect_timer,jiffies + (HZ<<1));
local_irq_save(flags);
_pcd->check_vbus_timer.expires = jiffies + (HZ); /* 1 s */
if(!pldata->get_status(USB_STATUS_ID)){ // id low
- if( pldata->phy_status){
- pldata->clock_enable( pldata, 1);
- pldata->phy_suspend(pldata, USB_PHY_ENABLED);
- }
+
+ if( pldata->phy_status)
+ pldata->phy_suspend(pldata, USB_PHY_ENABLED);
}
else if(pldata->get_status(USB_STATUS_BVABLID)){ // bvalid
/* if usb not connect before ,then start connect */
_pcd->vbus_status = 1;
if(_pcd->conn_en)
goto connect;
- else if( pldata->phy_status == USB_PHY_ENABLED ){
+ else{
// not connect, suspend phy
pldata->phy_suspend(pldata, USB_PHY_SUSPEND);
udelay(3);
_pcd->vbus_status = 2;
// not connect, suspend phy
- if( pldata->phy_status == USB_PHY_ENABLED ){
- pldata->phy_suspend(pldata, USB_PHY_SUSPEND);
- udelay(3);
- pldata->clock_enable( pldata, 0);
- }
+ pldata->phy_suspend(pldata, USB_PHY_SUSPEND);
+ udelay(3);
+ pldata->clock_enable( pldata, 0);
}
}else {
_pcd->vbus_status = 0;
_pcd->conn_status = 0;
dwc_otg_msc_unlock(_pcd);
}
- else if( pldata->phy_status == USB_PHY_ENABLED ){
+ /* every 500 ms open usb phy power and start 1 jiffies timer to get vbus */
+ else if( pldata->phy_status == 0 ){
/* no vbus detect here , close usb phy */
pldata->phy_suspend(pldata, USB_PHY_SUSPEND);
udelay(3);
connect:
if(_pcd->conn_status==0)
dwc_otg_msc_lock(_pcd);
- if( pldata->phy_status){
- pldata->clock_enable( pldata, 1);
- pldata->phy_suspend(pldata, USB_PHY_ENABLED);
- }
+ pldata->clock_enable( pldata, 1);
+ pldata->phy_suspend(pldata, USB_PHY_ENABLED);
schedule_delayed_work( &_pcd->reconnect , 8 ); /* delay 1 jiffies */
_pcd->check_vbus_timer.expires = jiffies + (HZ<<1); /* 1 s */
add_timer(&_pcd->check_vbus_timer);
pcd->vbus_status = 0;
pcd->phy_suspend = 0;
if(dwc_otg_is_device_mode(core_if))
- mod_timer(&pcd->check_vbus_timer, jiffies+(HZ<<4)); // delay 16 S
+ mod_timer(&pcd->check_vbus_timer, jiffies+(HZ<<2)); // delay 16 S
return 0;
}
/**
usbpdata->phy_status = 0;\r
}\r
#endif\r
+\r
}\r
void usb20otg_soft_reset(void)\r
{\r
+#if 1\r
cru_set_soft_reset(SOFT_RST_USBOTG0, true);\r
cru_set_soft_reset(SOFT_RST_USBPHY0, true);\r
cru_set_soft_reset(SOFT_RST_OTGC0, true);\r
cru_set_soft_reset(SOFT_RST_USBPHY0, false);\r
cru_set_soft_reset(SOFT_RST_OTGC0, false);\r
mdelay(1);\r
+#endif\r
}\r
void usb20otg_clock_init(void* pdata)\r
{\r
void usb20otg_clock_enable(void* pdata, int enable)\r
{\r
struct dwc_otg_platform_data *usbpdata=pdata;\r
-\r
+ #if 1\r
if(enable){\r
clk_enable(usbpdata->ahbclk);\r
clk_enable(usbpdata->phyclk);\r
clk_disable(usbpdata->phyclk);\r
clk_disable(usbpdata->ahbclk);\r
}\r
+ #endif\r
}\r
int usb20otg_get_status(int id)\r
{\r
.clock_init=usb20otg_clock_init,\r
.clock_enable=usb20otg_clock_enable,\r
.get_status=usb20otg_get_status,\r
-#ifdef CONFIG_ARCH_RK3066B\r
.power_enable=usb20otg_power_enable,\r
-#endif \r
+ \r
};\r
\r
struct platform_device device_usb20_otg = {\r
}\r
void usb20host_soft_reset(void)\r
{\r
+#if 1\r
cru_set_soft_reset(SOFT_RST_USBOTG1, true);\r
cru_set_soft_reset(SOFT_RST_USBPHY1, true);\r
cru_set_soft_reset(SOFT_RST_OTGC1, true);\r
cru_set_soft_reset(SOFT_RST_USBPHY1, false);\r
cru_set_soft_reset(SOFT_RST_OTGC1, false);\r
mdelay(1);\r
+#endif\r
}\r
void usb20host_clock_init(void* pdata)\r
{\r
void usb20host_clock_enable(void* pdata, int enable)\r
{\r
struct dwc_otg_platform_data *usbpdata=pdata;\r
- \r
+ #if 1\r
if(enable){\r
clk_enable(usbpdata->ahbclk);\r
clk_enable(usbpdata->phyclk);\r
clk_disable(usbpdata->phyclk);\r
clk_disable(usbpdata->ahbclk);\r
}\r
+ #endif\r
}\r
int usb20host_get_status(int id)\r
{\r
.clock_init=usb20host_clock_init,\r
.clock_enable=usb20host_clock_enable,\r
.get_status=usb20host_get_status,\r
-#ifdef CONFIG_ARCH_RK3066B\r
.power_enable=usb20host_power_enable,\r
-#endif \r
};\r
\r
struct platform_device device_usb20_host = {\r
+++ /dev/null
-
-/* include/linux/regulator/act8931.h
- *
- * Copyright (C) 2011 ROCKCHIP, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __LINUX_REGULATOR_act8931_H
-#define __LINUX_REGULATOR_act8931_H
-
-#include <linux/regulator/machine.h>
-
-//#define ACT8931_START 30
-
-#define ACT8931_LDO1 0 //(0+ACT8931_START)
-#define ACT8931_LDO2 1 // (1+ACT8931_START)
-#define ACT8931_LDO3 2 //(2+ACT8931_START)
-#define ACT8931_LDO4 3 //(3+ACT8931_START)
-
-
-#define ACT8931_DCDC1 4 //(4+ACT8931_START)
-#define ACT8931_DCDC2 5 //(5+ACT8931_START)
-#define ACT8931_DCDC3 6 //(6+ACT8931_START)
-
-
-#define act8931_NUM_REGULATORS 7
-struct act8931;
-
-/*
- * Register definitions to all subdrivers
- */
-static u8 act8931_reg_read(struct act8931 *act8931, u8 reg);
-static int act8931_set_bits(struct act8931 *act8931, u8 reg, u16 mask, u16 val);
-
-
-#define act8931_BUCK1_SET_VOL_BASE 0x20
-#define act8931_BUCK2_SET_VOL_BASE 0x30
-#define act8931_BUCK3_SET_VOL_BASE 0x40
-#define act8931_LDO1_SET_VOL_BASE 0x50
-#define act8931_LDO2_SET_VOL_BASE 0x54
-#define act8931_LDO3_SET_VOL_BASE 0x60
-#define act8931_LDO4_SET_VOL_BASE 0x64
-
-#define act8931_BUCK1_CONTR_BASE 0x22
-#define act8931_BUCK2_CONTR_BASE 0x32
-#define act8931_BUCK3_CONTR_BASE 0x42
-#define act8931_LDO1_CONTR_BASE 0x51
-#define act8931_LDO2_CONTR_BASE 0x55
-#define act8931_LDO3_CONTR_BASE 0x61
-#define act8931_LDO4_CONTR_BASE 0x65
-
-#define BUCK_VOL_MASK 0x3f
-#define LDO_VOL_MASK 0x3f
-
-#define VOL_MIN_IDX 0x00
-#define VOL_MAX_IDX 0x3f
-
-struct act8931_regulator_subdev {
- int id;
- struct regulator_init_data *initdata;
-};
-
-struct act8931_platform_data {
- int num_regulators;
- int (*set_init)(struct act8931 *act8931);
- struct act8931_regulator_subdev *regulators;
-};
-
-
-#endif
-
projects / firefly-linux-kernel-4.4.55.git / commitdiff