[POWERPC] 4xx: Change Kilauea PCIe bus ranges in dts file
authorStefan Roese <sr@denx.de>
Sat, 15 Dec 2007 08:10:56 +0000 (19:10 +1100)
committerJosh Boyer <jwboyer@linux.vnet.ibm.com>
Sun, 23 Dec 2007 19:36:33 +0000 (13:36 -0600)
Currently we have some limitations in the 4xx PCIe driver and can't
support all possible PCIe busses. But the current limits in the
dts file are quite low (only 16 busses per RC). This patch increases
the number to 64 per RC.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
arch/powerpc/boot/dts/kilauea.dts

index 38141991310f71d9dedaf9a1cc028e46266cade7..67c7ea179a076df6d0055372a98fca6db2e93c87 100644 (file)
                        /* Inbound 2GB range starting at 0 */
                        dma-ranges = <42000000 0 0 0 0 80000000>;
 
-                       /* This drives busses 0x00 to 0x0f */
-                       bus-range = <00 0f>;
+                       /* This drives busses 0x00 to 0x3f */
+                       bus-range = <00 3f>;
 
                        /* Legacy interrupts (note the weird polarity, the bridge seems
                         * to invert PCIe legacy interrupts).
                        /* Inbound 2GB range starting at 0 */
                        dma-ranges = <42000000 0 0 0 0 80000000>;
 
-                       /* This drives busses 0x10 to 0x1f */
-                       bus-range = <10 1f>;
+                       /* This drives busses 0x40 to 0x7f */
+                       bus-range = <40 7f>;
 
                        /* Legacy interrupts (note the weird polarity, the bridge seems
                         * to invert PCIe legacy interrupts).