powerpc/mpc5121: update mpc5121ads DTS
authorAnatolij Gustschin <agust@denx.de>
Tue, 16 Feb 2010 18:12:04 +0000 (11:12 -0700)
committerGrant Likely <grant.likely@secretlab.ca>
Tue, 16 Feb 2010 18:12:04 +0000 (11:12 -0700)
Collects several changes needed after applying
previous mpc5121 platform and driver patches:

- Add mpc5121 reset module node
- Clean up and fix NAND description, remove unused properties
  here and correct NAND flash chip size.
- Clean up I2C nodes: remove obsolete "cell-index" properties,
  add "fsl,preserve-clocking" property
- Add I2C RTC node for m41t61 RTC
- Add I2C nodes for AD7414 temperature sensor and AT24C32CD3 EEPROM
- Fix compatible property in DMA node
- Clean up CAN nodes, remove unused "cell-index" properties
- Fix compatible property in DIU node
- USB node changes:
    - use "fsl,mpc5121-usb2-dr" compatible property only
    - remove "port0" and "port1" properties as these are only used
      for multi-port host(MHP) module which is not available
      on MPC5121.
    - use 'fsl,invert-drvvbus' and 'fsl,invert-pwr-fault' in
      USB node for internal PHY to specify polarities
      of the appropriate port pins.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
arch/powerpc/boot/dts/mpc5121ads.dts

index c353dac33416a705ef4872b00a9448a1a2792cd2..d2b2db7cb4a29b47ec9ffdf8224d3e40d9add92b 100644 (file)
                interrupt-parent = < &ipic >;
                #address-cells = <1>;
                #size-cells = <1>;
-               bank-width = <1>;
                // ADS has two Hynix 512MB Nand flash chips in a single
-               // stacked package .
+               // stacked package.
                chips = <2>;
-               nand0@0 {
-                       label = "nand0";
-                       reg = <0x00000000 0x02000000>;  // first 32 MB of chip 0
-               };
-               nand1@20000000 {
-                       label = "nand1";
-                       reg = <0x20000000 0x02000000>;  // first 32 MB of chip 1
+               nand@0 {
+                       label = "nand";
+                       reg = <0x00000000 0x40000000>;  // 512MB + 512MB
                };
        };
 
                        interrupt-parent = < &ipic >;
                };
 
+               reset@e00 {     // Reset module
+                       compatible = "fsl,mpc5121-reset";
+                       reg = <0xe00 0x100>;
+               };
+
                clock@f00 {     // Clock control
                        compatible = "fsl,mpc5121-clock";
                        reg = <0xf00 0x100>;
                        interrupt-parent = < &ipic >;
                };
 
-               mscan@1300 {
+               can@1300 {
                        compatible = "fsl,mpc5121-mscan";
-                       cell-index = <0>;
                        interrupts = <12 0x8>;
                        interrupt-parent = < &ipic >;
                        reg = <0x1300 0x80>;
                };
 
-               mscan@1380 {
+               can@1380 {
                        compatible = "fsl,mpc5121-mscan";
-                       cell-index = <1>;
                        interrupts = <13 0x8>;
                        interrupt-parent = < &ipic >;
                        reg = <0x1380 0x80>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-                       cell-index = <0>;
                        reg = <0x1700 0x20>;
                        interrupts = <9 0x8>;
                        interrupt-parent = < &ipic >;
+                       fsl,preserve-clocking;
+
+                       hwmon@4a {
+                               compatible = "adi,ad7414";
+                               reg = <0x4a>;
+                       };
+
+                       eeprom@50 {
+                               compatible = "at,24c32";
+                               reg = <0x50>;
+                       };
+
+                       rtc@68 {
+                               compatible = "stm,m41t62";
+                               reg = <0x68>;
+                       };
                };
 
                i2c@1720 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-                       cell-index = <1>;
                        reg = <0x1720 0x20>;
                        interrupts = <10 0x8>;
                        interrupt-parent = < &ipic >;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "fsl,mpc5121-i2c", "fsl-i2c";
-                       cell-index = <2>;
                        reg = <0x1740 0x20>;
                        interrupts = <11 0x8>;
                        interrupt-parent = < &ipic >;
                };
 
                display@2100 {
-                       compatible = "fsl,mpc5121-diu", "fsl-diu";
+                       compatible = "fsl,mpc5121-diu", "fsl,diu";
                        reg = <0x2100 0x100>;
                        interrupts = <64 0x8>;
                        interrupt-parent = < &ipic >;
 
                // USB1 using external ULPI PHY
                //usb@3000 {
-               //      compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+               //      compatible = "fsl,mpc5121-usb2-dr";
                //      reg = <0x3000 0x1000>;
                //      #address-cells = <1>;
                //      #size-cells = <0>;
                //      interrupts = <43 0x8>;
                //      dr_mode = "otg";
                //      phy_type = "ulpi";
-               //      port1;
                //};
 
                // USB0 using internal UTMI PHY
                usb@4000 {
-                       compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+                       compatible = "fsl,mpc5121-usb2-dr";
                        reg = <0x4000 0x1000>;
                        #address-cells = <1>;
                        #size-cells = <0>;
                        interrupts = <44 0x8>;
                        dr_mode = "otg";
                        phy_type = "utmi_wide";
-                       port0;
+                       fsl,invert-drvvbus;
+                       fsl,invert-pwr-fault;
                };
 
                // IO control
                };
 
                dma@14000 {
-                       compatible = "fsl,mpc5121-dma2";
+                       compatible = "fsl,mpc5121-dma";
                        reg = <0x14000 0x1800>;
                        interrupts = <65 0x8>;
                        interrupt-parent = < &ipic >;