static void amd76x_check(struct mem_ctl_info *mci)
{
struct amd76x_error_info info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
amd76x_get_error_info(mci, &info);
amd76x_process_error_info(mci, &info, 1);
}
u32 ems_mode;
struct amd76x_error_info discard;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems);
ems_mode = (ems >> 10) & 0x3;
if (mci == NULL)
return -ENOMEM;
- debugf0("%s(): mci = %p\n", __func__, mci);
+ debugf0("mci = %p\n", mci);
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail:
static int __devinit amd76x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* don't need to call pci_enable_device() */
return amd76x_probe1(pdev, ent->driver_data);
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (amd76x_pci)
edac_pci_release_generic_ctl(amd76x_pci);
reg += aw;
size = of_read_number(reg, sw);
reg += sw;
- debugf1("%s: start 0x%lx, size 0x%lx\n", __func__,
- start, size);
+ debugf1("start 0x%lx, size 0x%lx\n", start, size);
pdata->total_mem += size;
} while (reg < reg_end);
of_node_put(np);
- debugf0("%s: total_mem 0x%lx\n", __func__, pdata->total_mem);
+ debugf0("total_mem 0x%lx\n", pdata->total_mem);
}
static void cpc925_init_csrows(struct mem_ctl_info *mci)
*offset = pa & (PAGE_SIZE - 1);
*pfn = pa >> PAGE_SHIFT;
- debugf0("%s: ECC physical address 0x%lx\n", __func__, pa);
+ debugf0("ECC physical address 0x%lx\n", pa);
}
static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome)
goto err2;
}
- debugf0("%s: Successfully added edac device for %s\n",
- __func__, dev_info->ctl_name);
+ debugf0("Successfully added edac device for %s\n",
+ dev_info->ctl_name);
continue;
if (dev_info->exit)
dev_info->exit(dev_info);
- debugf0("%s: Successfully deleted edac device for %s\n",
- __func__, dev_info->ctl_name);
+ debugf0("Successfully deleted edac device for %s\n",
+ dev_info->ctl_name);
}
}
mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET);
si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT;
- debugf0("%s, Mem Scrub Ctrl Register 0x%x\n", __func__, mscr);
+ debugf0("Mem Scrub Ctrl Register 0x%x\n", mscr);
if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
(si == 0)) {
((mbcr & MBCR_64BITBUS_MASK) == 0))
dual = 1;
- debugf0("%s: %s channel\n", __func__,
- (dual > 0) ? "Dual" : "Single");
+ debugf0("%s channel\n", (dual > 0) ? "Dual" : "Single");
return dual;
}
struct resource *r;
int res = 0, nr_channels;
- debugf0("%s: %s platform device found!\n", __func__, pdev->name);
+ debugf0("%s platform device found!\n", pdev->name);
if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) {
res = -ENOMEM;
cpc925_add_edac_devices(vbase);
/* get this far and it's successful */
- debugf0("%s: success\n", __func__);
+ debugf0("success\n");
res = 0;
goto out;
u32 remap;
struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
if (page < pvt->tolm)
return page;
int i;
struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* convert the addr to 4k page */
page = sec1_add >> (PAGE_SHIFT - 4);
int row;
struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
if (error_one & 0x0202) {
error_2b = ded_add;
if (!handle_error)
return;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 0, 0, 0,
-1, -1, -1,
"e752x UE log memory write", "", NULL);
{
struct e752x_error_info info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
e752x_get_error_info(mci, &info);
e752x_process_error_info(mci, &info, 1);
}
pci_read_config_byte(pdev, E752X_DRB + index, &value);
/* convert a 128 or 64 MiB DRB to a page size. */
cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ debugf3("(%d) cumul_size 0x%x\n", index,
cumul_size);
if (cumul_size == last_cumul_size)
continue; /* not populated */
int drc_chan; /* Number of channels 0=1chan,1=2chan */
struct e752x_error_info discard;
- debugf0("%s(): mci\n", __func__);
+ debugf0("mci\n");
debugf0("Starting Probe1\n");
/* check to see if device 0 function 1 is enabled; if it isn't, we
if (mci == NULL)
return -ENOMEM;
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->mtype_cap = MEM_FLAG_RDDR;
/* 3100 IMCH supports SECDEC only */
mci->edac_ctl_cap = (dev_idx == I3100) ? EDAC_FLAG_SECDED :
mci->mod_ver = E752X_REVISION;
mci->pdev = &pdev->dev;
- debugf3("%s(): init pvt\n", __func__);
+ debugf3("init pvt\n");
pvt = (struct e752x_pvt *)mci->pvt_info;
pvt->dev_info = &e752x_devs[dev_idx];
pvt->mc_symmetric = ((ddrcsr & 0x10) != 0);
return -ENODEV;
}
- debugf3("%s(): more mci init\n", __func__);
+ debugf3("more mci init\n");
mci->ctl_name = pvt->dev_info->ctl_name;
mci->dev_name = pci_name(pdev);
mci->edac_check = e752x_check;
mci->edac_cap = EDAC_FLAG_SECDED; /* the only mode supported */
else
mci->edac_cap |= EDAC_FLAG_NONE;
- debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
+ debugf3("tolm, remapbase, remaplimit\n");
/* load the top of low memory, remap base, and remap limit vars */
pci_read_config_word(pdev, E752X_TOLM, &pci_data);
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail:
static int __devinit e752x_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* wake up and enable device */
if (pci_enable_device(pdev) < 0)
struct mem_ctl_info *mci;
struct e752x_pvt *pvt;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (e752x_pci)
edac_pci_release_generic_ctl(e752x_pci);
{
int pci_rc;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit e752x_exit(void)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
pci_unregister_driver(&e752x_driver);
}
/* FIXME - is this valid for both SECDED and S4ECD4ED? */
static inline int e7xxx_find_channel(u16 syndrome)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
if ((syndrome & 0xff00) == 0)
return 0;
u32 remap;
struct e7xxx_pvt *pvt = (struct e7xxx_pvt *)mci->pvt_info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
if ((page < pvt->tolm) ||
((page >= 0x100000) && (page < pvt->remapbase)))
int row;
int channel;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* read the error address */
error_1b = info->dram_celog_add;
/* FIXME - should use PAGE_SHIFT */
static void process_ce_no_info(struct mem_ctl_info *mci)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 0, 0, 0, -1, -1, -1,
"e7xxx CE log register overflow", "", NULL);
}
u32 error_2b, block_page;
int row;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* read the error address */
error_2b = info->dram_uelog_add;
/* FIXME - should use PAGE_SHIFT */
static void process_ue_no_info(struct mem_ctl_info *mci)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 0, 0, 0, -1, -1, -1,
"e7xxx UE log register overflow", "", NULL);
{
struct e7xxx_error_info info;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
e7xxx_get_error_info(mci, &info);
e7xxx_process_error_info(mci, &info, 1);
}
pci_read_config_byte(pdev, E7XXX_DRB + index, &value);
/* convert a 64 or 32 MiB DRB to a page size. */
cumul_size = value << (25 + drc_drbg - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ debugf3("(%d) cumul_size 0x%x\n", index,
cumul_size);
if (cumul_size == last_cumul_size)
continue; /* not populated */
int drc_chan;
struct e7xxx_error_info discard;
- debugf0("%s(): mci\n", __func__);
+ debugf0("mci\n");
pci_read_config_dword(pdev, E7XXX_DRC, &drc);
if (mci == NULL)
return -ENOMEM;
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->mtype_cap = MEM_FLAG_RDDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
EDAC_FLAG_S4ECD4ED;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = E7XXX_REVISION;
mci->pdev = &pdev->dev;
- debugf3("%s(): init pvt\n", __func__);
+ debugf3("init pvt\n");
pvt = (struct e7xxx_pvt *)mci->pvt_info;
pvt->dev_info = &e7xxx_devs[dev_idx];
pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL,
goto fail0;
}
- debugf3("%s(): more mci init\n", __func__);
+ debugf3("more mci init\n");
mci->ctl_name = pvt->dev_info->ctl_name;
mci->dev_name = pci_name(pdev);
mci->edac_check = e7xxx_check;
mci->ctl_page_to_phys = ctl_page_to_phys;
e7xxx_init_csrows(mci, pdev, dev_idx, drc);
mci->edac_cap |= EDAC_FLAG_NONE;
- debugf3("%s(): tolm, remapbase, remaplimit\n", __func__);
+ debugf3("tolm, remapbase, remaplimit\n");
/* load the top of low memory, remap base, and remap limit vars */
pci_read_config_word(pdev, E7XXX_TOLM, &pci_data);
pvt->tolm = ((u32) pci_data) << 4;
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail1;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail1:
static int __devinit e7xxx_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* wake up and enable device */
return pci_enable_device(pdev) ?
struct mem_ctl_info *mci;
struct e7xxx_pvt *pvt;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (e7xxx_pci)
edac_pci_release_generic_ctl(e7xxx_pci);
void *pvt, *p;
int err;
- debugf4("%s() instances=%d blocks=%d\n",
- __func__, nr_instances, nr_blocks);
+ debugf4("instances=%d blocks=%d\n",
+ nr_instances, nr_blocks);
/* Calculate the size of memory we need to allocate AND
* determine the offsets of the various item arrays
/* Name of this edac device */
snprintf(dev_ctl->name,sizeof(dev_ctl->name),"%s",edac_device_name);
- debugf4("%s() edac_dev=%p next after end=%p\n",
- __func__, dev_ctl, pvt + sz_private );
+ debugf4("edac_dev=%p next after end=%p\n",
+ dev_ctl, pvt + sz_private );
/* Initialize every Instance */
for (instance = 0; instance < nr_instances; instance++) {
snprintf(blk->name, sizeof(blk->name),
"%s%d", edac_block_name, block+offset_value);
- debugf4("%s() instance=%d inst_p=%p block=#%d "
+ debugf4("instance=%d inst_p=%p block=#%d "
"block_p=%p name='%s'\n",
- __func__, instance, inst, block,
+ instance, inst, block,
blk, blk->name);
/* if there are NO attributes OR no attribute pointer
attrib_p = &dev_attrib[block*nr_instances*nr_attrib];
blk->block_attributes = attrib_p;
- debugf4("%s() THIS BLOCK_ATTRIB=%p\n",
- __func__, blk->block_attributes);
+ debugf4("THIS BLOCK_ATTRIB=%p\n",
+ blk->block_attributes);
/* Initialize every user specified attribute in this
* block with the data the caller passed in
attrib->block = blk; /* up link */
- debugf4("%s() alloc-attrib=%p attrib_name='%s' "
+ debugf4("alloc-attrib=%p attrib_name='%s' "
"attrib-spec=%p spec-name=%s\n",
- __func__, attrib, attrib->attr.name,
+ attrib, attrib->attr.name,
&attrib_spec[attr],
attrib_spec[attr].attr.name
);
struct edac_device_ctl_info *edac_dev;
struct list_head *item;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
list_for_each(item, &edac_device_list) {
edac_dev = list_entry(item, struct edac_device_ctl_info, link);
void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev,
unsigned msec)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* take the arg 'msec' and set it into the control structure
* to used in the time period calculation
*/
int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
#ifdef CONFIG_EDAC_DEBUG
if (edac_debug_level >= 3)
{
struct edac_device_ctl_info *edac_dev;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mutex_lock(&device_ctls_mutex);
{
struct edac_device_ctl_info *edac_dev = to_edacdev(kobj);
- debugf4("%s() control index=%d\n", __func__, edac_dev->dev_idx);
+ debugf4("control index=%d\n", edac_dev->dev_idx);
/* decrement the EDAC CORE module ref count */
module_put(edac_dev->owner);
struct bus_type *edac_subsys;
int err;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
/* get the /sys/devices/system/edac reference */
edac_subsys = edac_get_sysfs_subsys();
if (edac_subsys == NULL) {
- debugf1("%s() no edac_subsys error\n", __func__);
+ debugf1("no edac_subsys error\n");
err = -ENODEV;
goto err_out;
}
&edac_subsys->dev_root->kobj,
"%s", edac_dev->name);
if (err) {
- debugf1("%s()Failed to register '.../edac/%s'\n",
- __func__, edac_dev->name);
+ debugf1("Failed to register '.../edac/%s'\n",
+ edac_dev->name);
goto err_kobj_reg;
}
kobject_uevent(&edac_dev->kobj, KOBJ_ADD);
* edac_device_unregister_sysfs_main_kobj() must be used
*/
- debugf4("%s() Registered '.../edac/%s' kobject\n",
- __func__, edac_dev->name);
+ debugf4("Registered '.../edac/%s' kobject\n",
+ edac_dev->name);
return 0;
*/
void edac_device_unregister_sysfs_main_kobj(struct edac_device_ctl_info *dev)
{
- debugf0("%s()\n", __func__);
- debugf4("%s() name of kobject is: %s\n",
- __func__, kobject_name(&dev->kobj));
+ debugf0("\n");
+ debugf4("name of kobject is: %s\n",
+ kobject_name(&dev->kobj));
/*
* Unregister the edac device's kobject and
{
struct edac_device_instance *instance;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
/* map from this kobj to the main control struct
* and then dec the main kobj count
{
struct edac_device_block *block;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
/* get the container of the kobj */
block = to_block(kobj);
struct edac_dev_sysfs_block_attribute *sysfs_attrib;
struct kobject *main_kobj;
- debugf4("%s() Instance '%s' inst_p=%p block '%s' block_p=%p\n",
- __func__, instance->name, instance, block->name, block);
- debugf4("%s() block kobj=%p block kobj->parent=%p\n",
- __func__, &block->kobj, &block->kobj.parent);
+ debugf4("Instance '%s' inst_p=%p block '%s' block_p=%p\n",
+ instance->name, instance, block->name, block);
+ debugf4("block kobj=%p block kobj->parent=%p\n",
+ &block->kobj, &block->kobj.parent);
/* init this block's kobject */
memset(&block->kobj, 0, sizeof(struct kobject));
&instance->kobj,
"%s", block->name);
if (err) {
- debugf1("%s() Failed to register instance '%s'\n",
- __func__, block->name);
+ debugf1("Failed to register instance '%s'\n",
+ block->name);
kobject_put(main_kobj);
err = -ENODEV;
goto err_out;
if (sysfs_attrib && block->nr_attribs) {
for (i = 0; i < block->nr_attribs; i++, sysfs_attrib++) {
- debugf4("%s() creating block attrib='%s' "
+ debugf4("creating block attrib='%s' "
"attrib->%p to kobj=%p\n",
- __func__,
sysfs_attrib->attr.name,
sysfs_attrib, &block->kobj);
err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl,
&edac_dev->kobj, "%s", instance->name);
if (err != 0) {
- debugf2("%s() Failed to register instance '%s'\n",
- __func__, instance->name);
+ debugf2("Failed to register instance '%s'\n",
+ instance->name);
kobject_put(main_kobj);
goto err_out;
}
- debugf4("%s() now register '%d' blocks for instance %d\n",
- __func__, instance->nr_blocks, idx);
+ debugf4("now register '%d' blocks for instance %d\n",
+ instance->nr_blocks, idx);
/* register all blocks of this instance */
for (i = 0; i < instance->nr_blocks; i++) {
}
kobject_uevent(&instance->kobj, KOBJ_ADD);
- debugf4("%s() Registered instance %d '%s' kobject\n",
- __func__, idx, instance->name);
+ debugf4("Registered instance %d '%s' kobject\n",
+ idx, instance->name);
return 0;
int i, j;
int err;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* iterate over creation of the instances */
for (i = 0; i < edac_dev->nr_instances; i++) {
int err;
struct kobject *edac_kobj = &edac_dev->kobj;
- debugf0("%s() idx=%d\n", __func__, edac_dev->dev_idx);
+ debugf0("idx=%d\n", edac_dev->dev_idx);
/* go create any main attributes callers wants */
err = edac_device_add_main_sysfs_attributes(edac_dev);
if (err) {
- debugf0("%s() failed to add sysfs attribs\n", __func__);
+ debugf0("failed to add sysfs attribs\n");
goto err_out;
}
err = sysfs_create_link(edac_kobj,
&edac_dev->dev->kobj, EDAC_DEVICE_SYMLINK);
if (err) {
- debugf0("%s() sysfs_create_link() returned err= %d\n",
- __func__, err);
+ debugf0("sysfs_create_link() returned err= %d\n",
+ err);
goto err_remove_main_attribs;
}
*/
err = edac_device_create_instances(edac_dev);
if (err) {
- debugf0("%s() edac_device_create_instances() "
- "returned err= %d\n", __func__, err);
+ debugf0("edac_device_create_instances() "
+ "returned err= %d\n", err);
goto err_remove_link;
}
- debugf4("%s() create-instances done, idx=%d\n",
- __func__, edac_dev->dev_idx);
+ debugf4("create-instances done, idx=%d\n",
+ edac_dev->dev_idx);
return 0;
*/
void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* remove any main attributes for this device */
edac_device_remove_main_sysfs_attributes(edac_dev);
layer = edac_align_ptr(&ptr, sizeof(*layer), n_layers);
for (i = 0; i < n_layers; i++) {
count *= layers[i].size;
- debugf4("%s: errcount layer %d size %d\n", __func__, i, count);
+ debugf4("errcount layer %d size %d\n", i, count);
ce_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count);
ue_per_layer[i] = edac_align_ptr(&ptr, sizeof(u32), count);
tot_errcount += 2 * count;
}
- debugf4("%s: allocating %d error counters\n", __func__, tot_errcount);
+ debugf4("allocating %d error counters\n", tot_errcount);
pvt = edac_align_ptr(&ptr, sz_pvt, 1);
size = ((unsigned long)pvt) + sz_pvt;
- debugf1("%s(): allocating %u bytes for mci data (%d %s, %d csrows/channels)\n",
- __func__, size,
+ debugf1("allocating %u bytes for mci data (%d %s, %d csrows/channels)\n",
+ size,
tot_dimms,
per_rank ? "ranks" : "dimms",
tot_csrows * tot_channels);
memset(&pos, 0, sizeof(pos));
row = 0;
chn = 0;
- debugf4("%s: initializing %d %s\n", __func__, tot_dimms,
+ debugf4("initializing %d %s\n", tot_dimms,
per_rank ? "ranks" : "dimms");
for (i = 0; i < tot_dimms; i++) {
chan = mci->csrows[row]->channels[chn];
mci->dimms[off] = dimm;
dimm->mci = mci;
- debugf2("%s: %d: %s%i (%d:%d:%d): row %d, chan %d\n", __func__,
- i, per_rank ? "rank" : "dimm", off,
+ debugf2("%d: %s%i (%d:%d:%d): row %d, chan %d\n", i,
+ per_rank ? "rank" : "dimm", off,
pos[0], pos[1], pos[2], row, chn);
/*
*/
void edac_mc_free(struct mem_ctl_info *mci)
{
- debugf1("%s()\n", __func__);
+ debugf1("\n");
/* the mci instance is freed here, when the sysfs object is dropped */
edac_unregister_sysfs(mci);
struct mem_ctl_info *mci;
struct list_head *item;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
*/
static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* if this instance is not in the POLL state, then simply return */
if (mci->op_state != OP_RUNNING_POLL)
status = cancel_delayed_work(&mci->work);
if (status == 0) {
- debugf0("%s() not canceled, flush the queue\n",
- __func__);
+ debugf0("not canceled, flush the queue\n");
/* workq instance might be running, wait for it */
flush_workqueue(edac_workqueue);
/* FIXME - should a warning be printed if no error detection? correction? */
int edac_mc_add_mc(struct mem_ctl_info *mci)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
#ifdef CONFIG_EDAC_DEBUG
if (edac_debug_level >= 3)
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mutex_lock(&mem_ctls_mutex);
void *virt_addr;
unsigned long flags = 0;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* ECC error page was not in our memory. Ignore it. */
if (!pfn_valid(page))
struct csrow_info **csrows = mci->csrows;
int row, i, j, n;
- debugf1("MC%d: %s(): 0x%lx\n", mci->mc_idx, __func__, page);
+ debugf1("MC%d: 0x%lx\n", mci->mc_idx, page);
row = -1;
for (i = 0; i < mci->nr_csrows; i++) {
if (n == 0)
continue;
- debugf3("MC%d: %s(): first(0x%lx) page(0x%lx) last(0x%lx) "
- "mask(0x%lx)\n", mci->mc_idx, __func__,
+ debugf3("MC%d: first(0x%lx) page(0x%lx) last(0x%lx) "
+ "mask(0x%lx)\n", mci->mc_idx,
csrow->first_page, page, csrow->last_page,
csrow->page_mask);
u16 error_count; /* FIXME: make it a parameter */
u8 grain_bits;
- debugf3("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf3("MC%d\n", mci->mc_idx);
/*
* Check if the event report is consistent and if the memory
* get csrow/channel of the DIMM, in order to allow
* incrementing the compat API counters
*/
- debugf4("%s: %s csrows map: (%d,%d)\n",
- __func__,
+ debugf4("%s csrows map: (%d,%d)\n",
mci->mem_is_per_rank ? "rank" : "dimm",
dimm->csrow, dimm->cschannel);
if (!enable_per_layer_report) {
strcpy(label, "any memory");
} else {
- debugf4("%s: csrow/channel to increment: (%d,%d)\n",
- __func__, row, chan);
+ debugf4("csrow/channel to increment: (%d,%d)\n",
+ row, chan);
if (p == label)
strcpy(label, "unknown memory");
if (type == HW_EVENT_ERR_CORRECTED) {
dev_set_name(&csrow->dev, "csrow%d", index);
dev_set_drvdata(&csrow->dev, csrow);
- debugf0("%s(): creating (virtual) csrow node %s\n", __func__,
- dev_name(&csrow->dev));
+ debugf0("creating (virtual) csrow node %s\n", dev_name(&csrow->dev));
err = device_add(&csrow->dev);
if (err < 0)
err = device_add(&dimm->dev);
- debugf0("%s(): creating rank/dimm device %s\n", __func__,
- dev_name(&dimm->dev));
+ debugf0("creating rank/dimm device %s\n", dev_name(&dimm->dev));
return err;
}
dev_set_drvdata(&mci->dev, mci);
pm_runtime_forbid(&mci->dev);
- debugf0("%s(): creating device %s\n", __func__,
- dev_name(&mci->dev));
+ debugf0("creating device %s\n", dev_name(&mci->dev));
err = device_add(&mci->dev);
if (err < 0) {
bus_unregister(&mci->bus);
if (dimm->nr_pages == 0)
continue;
#ifdef CONFIG_EDAC_DEBUG
- debugf1("%s creating dimm%d, located at ",
- __func__, i);
+ debugf1("creating dimm%d, located at ",
+ i);
if (edac_debug_level >= 1) {
int lay;
for (lay = 0; lay < mci->n_layers; lay++)
#endif
err = edac_create_dimm_object(mci, dimm, i);
if (err) {
- debugf1("%s() failure: create dimm %d obj\n",
- __func__, i);
+ debugf1("failure: create dimm %d obj\n",
+ i);
goto fail;
}
}
{
int i;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
#ifdef CONFIG_EDAC_DEBUG
debugfs_remove(mci->debugfs);
struct dimm_info *dimm = mci->dimms[i];
if (dimm->nr_pages == 0)
continue;
- debugf0("%s(): removing device %s\n", __func__,
- dev_name(&dimm->dev));
+ debugf0("removing device %s\n", dev_name(&dimm->dev));
put_device(&dimm->dev);
device_del(&dimm->dev);
}
/* get the /sys/devices/system/edac subsys reference */
edac_subsys = edac_get_sysfs_subsys();
if (edac_subsys == NULL) {
- debugf1("%s() no edac_subsys\n", __func__);
+ debugf1("no edac_subsys\n");
return -EINVAL;
}
*/
static void __exit edac_exit(void)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* tear down the various subsystems */
edac_workqueue_teardown();
void *p = NULL, *pvt;
unsigned int size;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
pci = edac_align_ptr(&p, sizeof(*pci), 1);
pvt = edac_align_ptr(&p, 1, sz_pvt);
*/
void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci)
{
- debugf1("%s()\n", __func__);
+ debugf1("\n");
edac_pci_remove_sysfs(pci);
}
struct edac_pci_ctl_info *pci;
struct list_head *item;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
list_for_each(item, &edac_pci_list) {
pci = list_entry(item, struct edac_pci_ctl_info, link);
struct list_head *item, *insert_before;
struct edac_pci_ctl_info *rover;
- debugf1("%s()\n", __func__);
+ debugf1("\n");
insert_before = &edac_pci_list;
int msec;
unsigned long delay;
- debugf3("%s() checking\n", __func__);
+ debugf3("checking\n");
mutex_lock(&edac_pci_ctls_mutex);
static void edac_pci_workq_setup(struct edac_pci_ctl_info *pci,
unsigned int msec)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
INIT_DELAYED_WORK(&pci->work, edac_pci_workq_function);
queue_delayed_work(edac_workqueue, &pci->work,
{
int status;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
status = cancel_delayed_work(&pci->work);
if (status == 0)
void edac_pci_reset_delay_period(struct edac_pci_ctl_info *pci,
unsigned long value)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
edac_pci_workq_teardown(pci);
*/
int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
pci->pci_idx = edac_idx;
pci->start_time = jiffies;
{
struct edac_pci_ctl_info *pci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mutex_lock(&edac_pci_ctls_mutex);
*/
static void edac_pci_generic_check(struct edac_pci_ctl_info *pci)
{
- debugf4("%s()\n", __func__);
+ debugf4("\n");
edac_pci_do_parity_check();
}
pdata->edac_idx = edac_pci_idx++;
if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
- debugf3("%s(): failed edac_pci_add_device()\n", __func__);
+ debugf3("failed edac_pci_add_device()\n");
edac_pci_free_ctl_info(pci);
return NULL;
}
*/
void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci)
{
- debugf0("%s() pci mod=%s\n", __func__, pci->mod_name);
+ debugf0("pci mod=%s\n", pci->mod_name);
edac_pci_del_device(pci->dev);
edac_pci_free_ctl_info(pci);
{
struct edac_pci_ctl_info *pci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* Form pointer to containing struct, the pci control struct */
pci = to_instance(kobj);
struct kobject *main_kobj;
int err;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* First bump the ref count on the top main kobj, which will
* track the number of PCI instances we have, and thus nest
err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance,
edac_pci_top_main_kobj, "pci%d", idx);
if (err != 0) {
- debugf2("%s() failed to register instance pci%d\n",
- __func__, idx);
+ debugf2("failed to register instance pci%d\n",
+ idx);
kobject_put(edac_pci_top_main_kobj);
goto error_out;
}
kobject_uevent(&pci->kobj, KOBJ_ADD);
- debugf1("%s() Register instance 'pci%d' kobject\n", __func__, idx);
+ debugf1("Register instance 'pci%d' kobject\n", idx);
return 0;
static void edac_pci_unregister_sysfs_instance_kobj(
struct edac_pci_ctl_info *pci)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* Unregister the instance kobject and allow its release
* function release the main reference count and then
*/
static void edac_pci_release_main_kobj(struct kobject *kobj)
{
- debugf0("%s() here to module_put(THIS_MODULE)\n", __func__);
+ debugf0("here to module_put(THIS_MODULE)\n");
kfree(kobj);
int err;
struct bus_type *edac_subsys;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* check and count if we have already created the main kobject */
if (atomic_inc_return(&edac_pci_sysfs_refcount) != 1)
*/
edac_subsys = edac_get_sysfs_subsys();
if (edac_subsys == NULL) {
- debugf1("%s() no edac_subsys\n", __func__);
+ debugf1("no edac_subsys\n");
err = -ENODEV;
goto decrement_count_fail;
}
* level main kobj for EDAC PCI
*/
if (!try_module_get(THIS_MODULE)) {
- debugf1("%s() try_module_get() failed\n", __func__);
+ debugf1("try_module_get() failed\n");
err = -ENODEV;
goto mod_get_fail;
}
*/
static void edac_pci_main_kobj_teardown(void)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* Decrement the count and only if no more controller instances
* are connected perform the unregisteration of the top level
* main kobj
*/
if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) {
- debugf0("%s() called kobject_put on main kobj\n",
- __func__);
+ debugf0("called kobject_put on main kobj\n");
kobject_put(edac_pci_top_main_kobj);
}
edac_put_sysfs_subsys();
int err;
struct kobject *edac_kobj = &pci->kobj;
- debugf0("%s() idx=%d\n", __func__, pci->pci_idx);
+ debugf0("idx=%d\n", pci->pci_idx);
/* create the top main EDAC PCI kobject, IF needed */
err = edac_pci_main_kobj_setup();
err = sysfs_create_link(edac_kobj, &pci->dev->kobj, EDAC_PCI_SYMLINK);
if (err) {
- debugf0("%s() sysfs_create_link() returned err= %d\n",
- __func__, err);
+ debugf0("sysfs_create_link() returned err= %d\n",
+ err);
goto symlink_fail;
}
*/
void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci)
{
- debugf0("%s() index=%d\n", __func__, pci->pci_idx);
+ debugf0("index=%d\n", pci->pci_idx);
/* Remove the symlink */
sysfs_remove_link(&pci->kobj, EDAC_PCI_SYMLINK);
* if this 'pci' is the last instance.
* If it is, the main kobject will be unregistered as a result
*/
- debugf0("%s() calling edac_pci_main_kobj_teardown()\n", __func__);
+ debugf0("calling edac_pci_main_kobj_teardown()\n");
edac_pci_main_kobj_teardown();
}
{
int before_count;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* if policy has PCI check off, leave now */
if (!check_pci_errors)
{
struct i3000_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i3000_get_error_info(mci, &info);
i3000_process_error_info(mci, &info, 1);
}
unsigned long mchbar;
void __iomem *window;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
mchbar &= I3000_MCHBAR_MASK;
if (!mci)
return -ENOMEM;
- debugf3("MC: %s(): init mci\n", __func__);
+ debugf3("MC: init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
if (interleaved)
cumul_size <<= 1;
- debugf3("MC: %s(): (%d) cumul_size 0x%x\n",
- __func__, i, cumul_size);
+ debugf3("MC: (%d) cumul_size 0x%x\n",
+ i, cumul_size);
if (cumul_size == last_cumul_size)
continue;
rc = -ENODEV;
if (edac_mc_add_mc(mci)) {
- debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("MC: failed edac_mc_add_mc()\n");
goto fail;
}
}
/* get this far and it's successful */
- debugf3("MC: %s(): success\n", __func__);
+ debugf3("MC: success\n");
return 0;
fail:
{
int rc;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
if (pci_enable_device(pdev) < 0)
return -EIO;
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (i3000_pci)
edac_pci_release_generic_ctl(i3000_pci);
{
int pci_rc;
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit i3000_exit(void)
{
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
pci_unregister_driver(&i3000_driver);
if (!i3000_registered) {
{
struct i3200_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i3200_get_and_clear_error_info(mci, &info);
i3200_process_error_info(mci, &info);
}
void __iomem *window;
struct i3200_priv *priv;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
window = i3200_map_mchbar(pdev);
if (!window)
if (!mci)
return -ENOMEM;
- debugf3("MC: %s(): init mci\n", __func__);
+ debugf3("MC: init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
rc = -ENODEV;
if (edac_mc_add_mc(mci)) {
- debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("MC: failed edac_mc_add_mc()\n");
goto fail;
}
/* get this far and it's successful */
- debugf3("MC: %s(): success\n", __func__);
+ debugf3("MC: success\n");
return 0;
fail:
{
int rc;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
if (pci_enable_device(pdev) < 0)
return -EIO;
struct mem_ctl_info *mci;
struct i3200_priv *priv;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mci = edac_mc_del_mc(&pdev->dev);
if (!mci)
{
int pci_rc;
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit i3200_exit(void)
{
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
pci_unregister_driver(&i3200_driver);
if (!i3200_registered) {
static void i5000_check_error(struct mem_ctl_info *mci)
{
struct i5000_error_info info;
- debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
+ debugf4("MC%d\n", mci->mc_idx);
i5000_get_error_info(mci, &info);
i5000_process_error_info(mci, &info, 1);
}
int num_channels;
int num_dimms_per_channel;
- debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __FILE__, __func__,
- pdev->bus->number,
+ debugf0("MC: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
/* We only are looking for func 0 of the set */
i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
&num_channels);
- debugf0("MC: %s(): Number of Branches=2 Channels= %d DIMMS= %d\n",
- __func__, num_channels, num_dimms_per_channel);
+ debugf0("MC: Number of Branches=2 Channels= %d DIMMS= %d\n",
+ num_channels, num_dimms_per_channel);
/* allocate a new MC control structure */
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
+ debugf0("MC: %s(): mci = %p\n", __FILE__, mci);
mci->pdev = &pdev->dev; /* record ptr to the generic device */
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
- __FILE__, __func__);
+ debugf0("MC: %s(): failed edac_mc_add_mc()\n",
+ __FILE__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
{
int rc;
- debugf0("MC: %s: %s()\n", __FILE__, __func__);
+ debugf0("MC: %s()\n", __FILE__);
/* wake up device */
rc = pci_enable_device(pdev);
{
struct mem_ctl_info *mci;
- debugf0("%s: %s()\n", __FILE__, __func__);
+ debugf0("%s()\n", __FILE__);
if (i5000_pci)
edac_pci_release_generic_ctl(i5000_pci);
{
int pci_rc;
- debugf2("MC: %s: %s()\n", __FILE__, __func__);
+ debugf2("MC: %s()\n", __FILE__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
*/
static void __exit i5000_exit(void)
{
- debugf2("MC: %s: %s()\n", __FILE__, __func__);
+ debugf2("MC: %s()\n", __FILE__);
pci_unregister_driver(&i5000_driver);
}
static void i5400_check_error(struct mem_ctl_info *mci)
{
struct i5400_error_info info;
- debugf4("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
+ debugf4("MC%d\n", mci->mc_idx);
i5400_get_error_info(mci, &info);
i5400_process_error_info(mci, &info);
}
size_mb = pvt->dimm_info[slot][channel].megabytes;
- debugf2("%s: dimm (branch %d channel %d slot %d): %d.%03d GB\n",
- __func__,
+ debugf2("dimm (branch %d channel %d slot %d): %d.%03d GB\n",
channel / 2, channel % 2, slot,
size_mb / 1000, size_mb % 1000);
if (dev_idx >= ARRAY_SIZE(i5400_devs))
return -EINVAL;
- debugf0("MC: %s: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __FILE__, __func__,
- pdev->bus->number,
+ debugf0("MC: %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+ __FILE__, pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
/* We only are looking for func 0 of the set */
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
+ debugf0("MC: %s(): mci = %p\n", __FILE__, mci);
mci->pdev = &pdev->dev; /* record ptr to the generic device */
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: %s: %s(): failed edac_mc_add_mc()\n",
- __FILE__, __func__);
+ debugf0("MC: %s(): failed edac_mc_add_mc()\n",
+ __FILE__);
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
{
int rc;
- debugf0("MC: %s: %s()\n", __FILE__, __func__);
+ debugf0("MC: %s()\n", __FILE__);
/* wake up device */
rc = pci_enable_device(pdev);
{
struct mem_ctl_info *mci;
- debugf0("%s: %s()\n", __FILE__, __func__);
+ debugf0("%s()\n", __FILE__);
if (i5400_pci)
edac_pci_release_generic_ctl(i5400_pci);
{
int pci_rc;
- debugf2("MC: %s: %s()\n", __FILE__, __func__);
+ debugf2("MC: %s()\n", __FILE__);
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
*/
static void __exit i5400_exit(void)
{
- debugf2("MC: %s: %s()\n", __FILE__, __func__);
+ debugf2("MC: %s()\n", __FILE__);
pci_unregister_driver(&i5400_driver);
}
if (rc == -EIO)
return rc;
- debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
- __func__,
+ debugf0("MC: pdev bus %u dev=0x%x fn=0x%x\n",
pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+ debugf0("MC: mci = %p\n", mci);
mci->pdev = &pdev->dev; /* record ptr to the generic device */
/* add this new MC control structure to EDAC's list of MCs */
if (edac_mc_add_mc(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: failed edac_mc_add_mc()\n");
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
struct mem_ctl_info *mci;
char *tmp;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("\n");
if (i7300_pci)
edac_pci_release_generic_ctl(i7300_pci);
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
*/
static void __exit i7300_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
pci_unregister_driver(&i7300_driver);
}
long value; \
int rc; \
\
- debugf1("%s()\n", __func__); \
+ debugf1("\n"); \
pvt = mci->pvt_info; \
\
if (pvt->inject.enable) \
struct i7core_pvt *pvt; \
\
pvt = mci->pvt_info; \
- debugf1("%s() pvt=%p\n", __func__, pvt); \
+ debugf1("pvt=%p\n", pvt); \
if (pvt->inject.param < 0) \
return sprintf(data, "any\n"); \
else \
struct mem_ctl_info *mci = to_mci(dev); \
struct i7core_pvt *pvt = mci->pvt_info; \
\
- debugf1("%s()\n", __func__); \
+ debugf1("\n"); \
if (!pvt->ce_count_available || (pvt->is_registered)) \
return sprintf(data, "data unavailable\n"); \
return sprintf(data, "%lu\n", \
dev_set_name(pvt->addrmatch_dev, "inject_addrmatch");
dev_set_drvdata(pvt->addrmatch_dev, mci);
- debugf1("%s(): creating %s\n", __func__,
- dev_name(pvt->addrmatch_dev));
+ debugf1("creating %s\n", dev_name(pvt->addrmatch_dev));
rc = device_add(pvt->addrmatch_dev);
if (rc < 0)
dev_set_name(pvt->chancounts_dev, "all_channel_counts");
dev_set_drvdata(pvt->chancounts_dev, mci);
- debugf1("%s(): creating %s\n", __func__,
- dev_name(pvt->chancounts_dev));
+ debugf1("creating %s\n", dev_name(pvt->chancounts_dev));
rc = device_add(pvt->chancounts_dev);
if (rc < 0)
{
int i;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("\n");
for (i = 0; i < i7core_dev->n_devs; i++) {
struct pci_dev *pdev = i7core_dev->pdev[i];
if (!pdev)
int new0, new1, new2;
if (!pvt->pci_mcr[4]) {
- debugf0("%s MCR registers not found\n", __func__);
+ debugf0("MCR registers not found\n");
return;
}
struct i7core_pvt *pvt;
if (unlikely(!mci || !mci->pvt_info)) {
- debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
- __func__, &i7core_dev->pdev[0]->dev);
+ debugf0("MC: dev = %p\n", &i7core_dev->pdev[0]->dev);
i7core_printk(KERN_ERR, "Couldn't find mci handler\n");
return;
pvt = mci->pvt_info;
- debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
- __func__, mci, &i7core_dev->pdev[0]->dev);
+ debugf0("MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
/* Disable scrubrate setting */
if (pvt->enable_scrub)
if (unlikely(!mci))
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
- __func__, mci, &i7core_dev->pdev[0]->dev);
+ debugf0("MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev);
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: failed edac_mc_add_mc()\n");
/* FIXME: perhaps some code should go here that disables error
* reporting if we just enabled it
*/
goto fail0;
}
if (i7core_create_sysfs_devices(mci)) {
- debugf0("MC: " __FILE__
- ": %s(): failed to create sysfs nodes\n", __func__);
+ debugf0("MC: failed to create sysfs nodes\n");
edac_mc_del_mc(mci->pdev);
rc = -EINVAL;
goto fail0;
{
struct i7core_dev *i7core_dev;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("\n");
/*
* we have a trouble here: pdev value for removal will be wrong, since
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
*/
static void __exit i7core_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
pci_unregister_driver(&i7core_driver);
}
{
struct i82443bxgx_edacmc_error_info info;
- debugf1("MC%d: %s: %s()\n", mci->mc_idx, __FILE__, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i82443bxgx_edacmc_get_error_info(mci, &info);
i82443bxgx_edacmc_process_error_info(mci, &info, 1);
}
dimm = csrow->channels[0]->dimm;
pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
- debugf1("MC%d: %s: %s() Row=%d DRB = %#0x\n",
- mci->mc_idx, __FILE__, __func__, index, drbar);
+ debugf1("MC%d: Row=%d DRB = %#0x\n",
+ mci->mc_idx,index, drbar);
row_high_limit = ((u32) drbar << 23);
/* find the DRAM Chip Select Base address and mask */
- debugf1("MC%d: %s: %s() Row=%d, "
+ debugf1("MC%d: Row=%d, "
"Boundary Address=%#0x, Last = %#0x\n",
- mci->mc_idx, __FILE__, __func__, index, row_high_limit,
+ mci->mc_idx, index, row_high_limit,
row_high_limit_last);
/* 440GX goes to 2GB, represented with a DRB of 0. */
enum mem_type mtype;
enum edac_type edac_mode;
- debugf0("MC: %s: %s()\n", __FILE__, __func__);
+ debugf0("MC: %s()\n", __FILE__);
/* Something is really hosed if PCI config space reads from
* the MC aren't working.
if (mci == NULL)
return -ENOMEM;
- debugf0("MC: %s: %s(): mci = %p\n", __FILE__, __func__, mci);
+ debugf0("MC: %s(): mci = %p\n", __FILE__, mci);
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
edac_mode = EDAC_SECDED;
break;
default:
- debugf0("%s(): Unknown/reserved ECC state "
- "in NBXCFG register!\n", __func__);
+ debugf0("Unknown/reserved ECC state "
+ "in NBXCFG register!\n");
edac_mode = EDAC_UNKNOWN;
break;
}
mci->ctl_page_to_phys = NULL;
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail;
}
__func__);
}
- debugf3("MC: %s: %s(): success\n", __FILE__, __func__);
+ debugf3("MC: %s(): success\n", __FILE__);
return 0;
fail:
{
int rc;
- debugf0("MC: %s: %s()\n", __FILE__, __func__);
+ debugf0("MC: %s()\n", __FILE__);
/* don't need to call pci_enable_device() */
rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
{
struct mem_ctl_info *mci;
- debugf0("%s: %s()\n", __FILE__, __func__);
+ debugf0("%s()\n", __FILE__);
if (i82443bxgx_pci)
edac_pci_release_generic_ctl(i82443bxgx_pci);
{
struct i82860_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i82860_get_error_info(mci, &info);
i82860_process_error_info(mci, &info, 1);
}
pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
cumul_size = (value & I82860_GBA_MASK) <<
(I82860_GBA_SHIFT - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ debugf3("(%d) cumul_size 0x%x\n", index,
cumul_size);
if (cumul_size == last_cumul_size)
if (!mci)
return -ENOMEM;
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
{
int rc;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
i82860_printk(KERN_INFO, "i82860 init one\n");
if (pci_enable_device(pdev) < 0)
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (i82860_pci)
edac_pci_release_generic_ctl(i82860_pci);
{
int pci_rc;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit i82860_exit(void)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
pci_unregister_driver(&i82860_driver);
{
struct i82875p_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i82875p_get_error_info(mci, &info);
i82875p_process_error_info(mci, &info, 1);
}
value = readb(ovrfl_window + I82875P_DRB + index);
cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT);
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ debugf3("(%d) cumul_size 0x%x\n", index,
cumul_size);
if (cumul_size == last_cumul_size)
continue; /* not populated */
u32 nr_chans;
struct i82875p_error_info discard;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
ovrfl_pdev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL);
goto fail0;
}
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->dev_name = pci_name(pdev);
mci->edac_check = i82875p_check;
mci->ctl_page_to_phys = NULL;
- debugf3("%s(): init pvt\n", __func__);
+ debugf3("init pvt\n");
pvt = (struct i82875p_pvt *)mci->pvt_info;
pvt->ovrfl_pdev = ovrfl_pdev;
pvt->ovrfl_window = ovrfl_window;
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail1;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail1:
{
int rc;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
i82875p_printk(KERN_INFO, "i82875p init one\n");
if (pci_enable_device(pdev) < 0)
struct mem_ctl_info *mci;
struct i82875p_pvt *pvt = NULL;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (i82875p_pci)
edac_pci_release_generic_ctl(i82875p_pci);
{
int pci_rc;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit i82875p_exit(void)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
i82875p_remove_one(mci_pdev);
pci_dev_put(mci_pdev);
{
struct i82975x_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
i82975x_get_error_info(mci, &info);
i82975x_process_error_info(mci, &info, 1);
}
*/
if (csrow->nr_channels > 1)
cumul_size <<= 1;
- debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index,
+ debugf3("(%d) cumul_size 0x%x\n", index,
cumul_size);
nr_pages = cumul_size - last_cumul_size;
u8 c1drb[4];
#endif
- debugf0("%s()\n", __func__);
+ debugf0("\n");
pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar);
if (!(mchbar & 1)) {
- debugf3("%s(): failed, MCHBAR disabled!\n", __func__);
+ debugf3("failed, MCHBAR disabled!\n");
goto fail0;
}
mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */
goto fail1;
}
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->dev_name = pci_name(pdev);
mci->edac_check = i82975x_check;
mci->ctl_page_to_phys = NULL;
- debugf3("%s(): init pvt\n", __func__);
+ debugf3("init pvt\n");
pvt = (struct i82975x_pvt *) mci->pvt_info;
pvt->mch_window = mch_window;
i82975x_init_csrows(mci, pdev, mch_window);
/* finalize this instance of memory controller with edac core */
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail2;
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail2:
{
int rc;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (pci_enable_device(pdev) < 0)
return -EIO;
struct mem_ctl_info *mci;
struct i82975x_pvt *pvt;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mci = edac_mc_del_mc(&pdev->dev);
if (mci == NULL)
{
int pci_rc;
- debugf3("%s()\n", __func__);
+ debugf3("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit i82975x_exit(void)
{
- debugf3("%s()\n", __func__);
+ debugf3("\n");
pci_unregister_driver(&i82975x_driver);
out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0);
if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
- debugf3("%s(): failed edac_pci_add_device()\n", __func__);
+ debugf3("failed edac_pci_add_device()\n");
goto err;
}
}
devres_remove_group(&op->dev, mpc85xx_pci_err_probe);
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
printk(KERN_INFO EDAC_MOD_STR " PCI err registered\n");
return 0;
struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR,
orig_pci_err_cap_dr);
pdata->edac_idx = edac_dev_idx++;
if (edac_device_add_device(edac_dev) > 0) {
- debugf3("%s(): failed edac_device_add_device()\n", __func__);
+ debugf3("failed edac_device_add_device()\n");
goto err;
}
devres_remove_group(&op->dev, mpc85xx_l2_err_probe);
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
printk(KERN_INFO EDAC_MOD_STR " L2 err registered\n");
return 0;
struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev);
struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (edac_op_state == EDAC_OPSTATE_INT) {
out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, 0);
goto err;
}
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 |
MEM_FLAG_DDR | MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT, ~0);
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto err;
}
if (mpc85xx_create_sysfs_attributes(mci)) {
edac_mc_del_mc(mci->pdev);
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto err;
}
}
devres_remove_group(&op->dev, mpc85xx_mc_err_probe);
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
printk(KERN_INFO EDAC_MOD_STR " MC err registered\n");
return 0;
struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
struct mpc85xx_mc_pdata *pdata = mci->pvt_info;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (edac_op_state == EDAC_OPSTATE_INT) {
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_INT_EN, 0);
MV64X60_PCIx_ERR_MASK_VAL);
if (edac_pci_add_device(pci, pdata->edac_idx) > 0) {
- debugf3("%s(): failed edac_pci_add_device()\n", __func__);
+ debugf3("failed edac_pci_add_device()\n");
goto err;
}
devres_remove_group(&pdev->dev, mv64x60_pci_err_probe);
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
{
struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev);
- debugf0("%s()\n", __func__);
+ debugf0("\n");
edac_pci_del_device(&pdev->dev);
pdata->edac_idx = edac_dev_idx++;
if (edac_device_add_device(edac_dev) > 0) {
- debugf3("%s(): failed edac_device_add_device()\n", __func__);
+ debugf3("failed edac_device_add_device()\n");
goto err;
}
devres_remove_group(&pdev->dev, mv64x60_sram_err_probe);
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
{
struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
- debugf0("%s()\n", __func__);
+ debugf0("\n");
edac_device_del_device(&pdev->dev);
edac_device_free_ctl_info(edac_dev);
pdata->edac_idx = edac_dev_idx++;
if (edac_device_add_device(edac_dev) > 0) {
- debugf3("%s(): failed edac_device_add_device()\n", __func__);
+ debugf3("failed edac_device_add_device()\n");
goto err;
}
devres_remove_group(&pdev->dev, mv64x60_cpu_err_probe);
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
{
struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
- debugf0("%s()\n", __func__);
+ debugf0("\n");
edac_device_del_device(&pdev->dev);
edac_device_free_ctl_info(edac_dev);
goto err2;
}
- debugf3("%s(): init mci\n", __func__);
+ debugf3("init mci\n");
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
out_le32(pdata->mc_vbase + MV64X60_SDRAM_ERR_ECC_CNTL, ctl);
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto err;
}
}
/* get this far and it's successful */
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
{
struct mem_ctl_info *mci = platform_get_drvdata(pdev);
- debugf0("%s()\n", __func__);
+ debugf0("\n");
edac_mc_del_mc(&pdev->dev);
edac_mc_free(mci);
{
struct r82600_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
r82600_get_error_info(mci, &info);
r82600_process_error_info(mci, &info, 1);
}
/* find the DRAM Chip Select Base address and mask */
pci_read_config_byte(pdev, R82600_DRBA + index, &drbar);
- debugf1("%s() Row=%d DRBA = %#0x\n", __func__, index, drbar);
+ debugf1("Row=%d DRBA = %#0x\n", index, drbar);
row_high_limit = ((u32) drbar << 24);
/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
- debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n",
- __func__, index, row_high_limit, row_high_limit_last);
+ debugf1("Row=%d, Boundary Address=%#0x, Last = %#0x\n",
+ index, row_high_limit, row_high_limit_last);
/* Empty row [p.57] */
if (row_high_limit == row_high_limit_last)
u32 sdram_refresh_rate;
struct r82600_error_info discard;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
pci_read_config_dword(pdev, R82600_EAP, &eapr);
scrub_disabled = eapr & BIT(31);
sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
- debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
- sdram_refresh_rate);
- debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
+ debugf2("sdram refresh rate = %#0x\n", sdram_refresh_rate);
+ debugf2("DRAMC register = %#0x\n", dramcr);
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = R82600_NR_CSROWS;
layers[0].is_virt_csrow = true;
if (mci == NULL)
return -ENOMEM;
- debugf0("%s(): mci = %p\n", __func__, mci);
+ debugf0("mci = %p\n", mci);
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
if (ecc_enabled(dramcr)) {
if (scrub_disabled)
- debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
- "%#0x\n", __func__, mci, eapr);
+ debugf3("mci = %p - Scrubbing disabled! EAP: "
+ "%#0x\n", mci, eapr);
} else
mci->edac_cap = EDAC_FLAG_NONE;
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
- debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("failed edac_mc_add_mc()\n");
goto fail;
}
/* get this far and it's successful */
if (disable_hardware_scrub) {
- debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n",
- __func__);
+ debugf3("Disabling Hardware Scrub (scrub on error)\n");
pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
}
__func__);
}
- debugf3("%s(): success\n", __func__);
+ debugf3("success\n");
return 0;
fail:
static int __devinit r82600_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- debugf0("%s()\n", __func__);
+ debugf0("\n");
/* don't need to call pci_enable_device() */
return r82600_probe1(pdev, ent->driver_data);
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
if (r82600_pci)
edac_pci_release_generic_ctl(r82600_pci);
{
int i;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("\n");
for (i = 0; i < sbridge_dev->n_devs; i++) {
struct pci_dev *pdev = sbridge_dev->pdev[i];
if (!pdev)
struct sbridge_pvt *pvt;
if (unlikely(!mci || !mci->pvt_info)) {
- debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
- __func__, &sbridge_dev->pdev[0]->dev);
+ debugf0("MC: dev = %p\n", &sbridge_dev->pdev[0]->dev);
sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
return;
pvt = mci->pvt_info;
- debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
- __func__, mci, &sbridge_dev->pdev[0]->dev);
+ debugf0("MC: mci = %p, dev = %p\n",
+ mci, &sbridge_dev->pdev[0]->dev);
mce_unregister_decode_chain(&sbridge_mce_dec);
if (unlikely(!mci))
return -ENOMEM;
- debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
- __func__, mci, &sbridge_dev->pdev[0]->dev);
+ debugf0("MC: mci = %p, dev = %p\n",
+ mci, &sbridge_dev->pdev[0]->dev);
pvt = mci->pvt_info;
memset(pvt, 0, sizeof(*pvt));
/* add this new MC control structure to EDAC's list of MCs */
if (unlikely(edac_mc_add_mc(mci))) {
- debugf0("MC: " __FILE__
- ": %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf0("MC: failed edac_mc_add_mc()\n");
rc = -EINVAL;
goto fail0;
}
{
struct sbridge_dev *sbridge_dev;
- debugf0(__FILE__ ": %s()\n", __func__);
+ debugf0("\n");
/*
* we have a trouble here: pdev value for removal will be wrong, since
{
int pci_rc;
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
*/
static void __exit sbridge_exit(void)
{
- debugf2("MC: " __FILE__ ": %s()\n", __func__);
+ debugf2("\n");
pci_unregister_driver(&sbridge_driver);
}
{
struct x38_error_info info;
- debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ debugf1("MC%d\n", mci->mc_idx);
x38_get_and_clear_error_info(mci, &info);
x38_process_error_info(mci, &info);
}
bool stacked;
void __iomem *window;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
window = x38_map_mchbar(pdev);
if (!window)
if (!mci)
return -ENOMEM;
- debugf3("MC: %s(): init mci\n", __func__);
+ debugf3("MC: init mci\n");
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
rc = -ENODEV;
if (edac_mc_add_mc(mci)) {
- debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ debugf3("MC: failed edac_mc_add_mc()\n");
goto fail;
}
/* get this far and it's successful */
- debugf3("MC: %s(): success\n", __func__);
+ debugf3("MC: success\n");
return 0;
fail:
{
int rc;
- debugf0("MC: %s()\n", __func__);
+ debugf0("MC:\n");
if (pci_enable_device(pdev) < 0)
return -EIO;
{
struct mem_ctl_info *mci;
- debugf0("%s()\n", __func__);
+ debugf0("\n");
mci = edac_mc_del_mc(&pdev->dev);
if (!mci)
{
int pci_rc;
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
/* Ensure that the OPSTATE is set correctly for POLL or NMI */
opstate_init();
static void __exit x38_exit(void)
{
- debugf3("MC: %s()\n", __func__);
+ debugf3("MC:\n");
pci_unregister_driver(&x38_driver);
if (!x38_registered) {
projects / firefly-linux-kernel-4.4.55.git / commitdiff