dma: Add Xilinx AXI DMA DT Binding Documentation
authorSrikanth Thokala <sthokal@xilinx.com>
Mon, 28 Jul 2014 12:17:48 +0000 (17:47 +0530)
committerVinod Koul <vinod.koul@intel.com>
Tue, 19 Aug 2014 17:04:59 +0000 (22:34 +0530)
Device-tree binding documentation of Xilinx DMA Engine

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
new file mode 100644 (file)
index 0000000..2291c40
--- /dev/null
@@ -0,0 +1,65 @@
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-dma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain DMA registers location and length.
+- dma-channel child node: Should have atleast one channel and can have upto
+       two channels per device. This node specifies the properties of each
+       DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells whether configured for Scatter-mode in
+       the hardware.
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+       "xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel DMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+       {32,64...1024}.
+
+Option child node properties:
+- xlnx,include-dre: Tells whether hardware is configured for Data
+       Realignment Engine.
+
+Example:
+++++++++
+
+axi_dma_0: axidma@40400000 {
+       compatible = "xlnx,axi-dma-1.00.a";
+       #dma_cells = <1>;
+       reg = < 0x40400000 0x10000 >;
+       dma-channel@40400000 {
+               compatible = "xlnx,axi-dma-mm2s-channel";
+               interrupts = < 0 59 4 >;
+               xlnx,datawidth = <0x40>;
+       } ;
+       dma-channel@40400030 {
+               compatible = "xlnx,axi-dma-s2mm-channel";
+               interrupts = < 0 58 4 >;
+               xlnx,datawidth = <0x40>;
+       } ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+       where Channel ID is '0' for write/tx and '1' for read/rx
+       channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+dmatest_0: dmatest@0 {
+       compatible ="xlnx,axi-dma-test-1.00.a";
+       dmas = <&axi_dma_0 0
+               &axi_dma_0 1>;
+       dma-names = "dma0", "dma1";
+} ;