* can build the DRM (part of PI DRI). 4/21/2000 S + B */
#include <asm/current.h>
#endif /* __alpha__ */
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/fs.h>
#define __OS_HAS_AGP (defined(CONFIG_AGP) || (defined(CONFIG_AGP_MODULE) && defined(MODULE)))
#define __OS_HAS_MTRR (defined(CONFIG_MTRR))
+struct module;
+
struct drm_file;
struct drm_device;
#include <linux/wait.h>
#include <linux/mempool.h>
#include <linux/bio.h>
-#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/gfp.h>
#include <linux/bsg.h>
#include <asm/scatterlist.h>
+struct module;
struct scsi_ioctl_command;
struct request_queue;
#include <linux/percpu.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/completion.h>
#define CPUIDLE_NAME_LEN 16
#define CPUIDLE_DESC_LEN 32
+struct module;
+
struct cpuidle_device;
#include <linux/lockdep.h>
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/atomic.h>
#include <asm/device.h>
struct device_private;
struct device_driver;
struct driver_private;
+struct module;
struct class;
struct subsys_private;
struct bus_type;
#ifndef _LINUX_FIRMWARE_H
#define _LINUX_FIRMWARE_H
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/gfp.h>
struct page **pages;
};
+struct module;
struct device;
struct builtin_fw {
#include <linux/kallsyms.h>
#include <linux/linkage.h>
#include <linux/bitops.h>
-#include <linux/module.h>
#include <linux/ktime.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <asm/ftrace.h>
+struct module;
struct ftrace_hash;
#ifdef CONFIG_FUNCTION_TRACER
#include <linux/types.h>
#ifdef __KERNEL__
-#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/device.h> /* for struct device */
#include <linux/sched.h> /* for completion */
union i2c_smbus_data;
struct i2c_board_info;
+struct module;
+
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
/*
* The master routines are the ones normally used to transmit data to devices
* The in-kernel interface.
*/
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/device.h>
#include <linux/proc_fs.h>
+struct module;
+
/* Opaque type for a IPMI message user. One of these is needed to
send and receive messages. */
typedef struct ipmi_user *ipmi_user_t;
#include <linux/ipmi_msgdefs.h>
#include <linux/proc_fs.h>
-#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/ipmi.h>
#define __LINUX_MDIO_BITBANG_H
#include <linux/phy.h>
-#include <linux/module.h>
+
+struct module;
struct mdiobb_ctrl;
#define __MTD_MTD_H__
#include <linux/types.h>
-#include <linux/module.h>
#include <linux/uio.h>
#include <linux/notifier.h>
#include <linux/device.h>
struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
};
+struct module; /* only needed for owner field in mtd_info */
+
struct mtd_info {
u_char type;
uint32_t flags;
#include <linux/device.h>
#include <linux/list.h>
-#include <linux/module.h>
+struct module;
struct i2c_client;
struct spi_device;
#define SUNRPC_SVC_XPRT_H
#include <linux/sunrpc/svc.h>
-#include <linux/module.h>
+
+struct module;
struct svc_xprt_ops {
struct svc_xprt *(*xpo_create)(struct svc_serv *,
#include <linux/types.h>
#include <linux/list.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/err.h>
#include <linux/slab.h>
+struct module;
+
struct ts_config;
#define TS_AUTOLOAD 1 /* Automatically load textsearch modules when needed */
#ifndef _UIO_DRIVER_H_
#define _UIO_DRIVER_H_
-#include <linux/module.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
+struct module;
struct uio_map;
/**
#define __VLYNQ_H__
#include <linux/device.h>
-#include <linux/module.h>
#include <linux/types.h>
+struct module;
+
#define VLYNQ_NUM_IRQS 32
struct vlynq_mapping {
#ifndef __SAA7146__
#define __SAA7146__
-#include <linux/module.h> /* for module-version */
#include <linux/delay.h> /* for delay-stuff */
#include <linux/slab.h> /* for kmalloc/kfree */
#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */
#define SAA7146_ISR_CLEAR(x,y) \
saa7146_write(x, ISR, (y));
+struct module;
+
struct saa7146_dev;
struct saa7146_extension;
struct saa7146_vv;
#ifndef V4L2_INT_DEVICE_H
#define V4L2_INT_DEVICE_H
-#include <linux/module.h>
#include <media/v4l2-common.h>
#define V4L2NAMESIZE 32
v4l2_int_type_slave
};
+struct module;
+
struct v4l2_int_device;
struct v4l2_int_master {
#include <linux/types.h>
#include <linux/list.h>
-#include <linux/module.h>
#include <linux/atomic.h>
#include <linux/if.h>
#include <linux/skbuff.h>
IEEE80211_CRYPTO_TKIP_COUNTERMEASURES = (1 << 0),
};
+struct module;
+
struct lib80211_crypto_ops {
const char *name;
struct list_head list;
#include <linux/list_nulls.h>
#include <linux/timer.h>
#include <linux/cache.h>
-#include <linux/module.h>
#include <linux/lockdep.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h> /* struct sk_buff */
struct timewait_sock_ops;
struct inet_hashinfo;
struct raw_hashinfo;
+struct module;
/* Networking protocol blocks we attach to sockets.
* socket layer -> transport layer interface
*
*/
-#include <linux/module.h>
#include <linux/sched.h> /* wake_up() */
#include <linux/mutex.h> /* struct mutex */
#include <linux/rwsem.h> /* struct rw_semaphore */
#ifdef CONFIG_PCI
struct pci_dev;
#endif
+struct module;
/* device allocation stuff */
/*
* Because linux/module.h has tracepoints in the header, and ftrace.h
- * eventually includes this file, define_trace.h includes linux/module.h
+ * used to include this file, define_trace.h includes linux/module.h
* But we do not want the module.h to override the TRACE_SYSTEM macro
* variable that define_trace.h is processing, so we only set it
* when module events are being processed, which would happen when