regulator: Replace set_voltage with set_voltage_sel
authorSangbeom Kim <sbkim73@samsung.com>
Wed, 13 Jun 2012 08:28:18 +0000 (17:28 +0900)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 13 Jun 2012 17:45:09 +0000 (18:45 +0100)
To apply delay time for voltage change,
replace s5m8767_set_voltage with s5m8767_set_voltage_sel.

Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
drivers/regulator/s5m8767.c

index 4edf344fb7c441a761a6732c91e797d00f5a77e2..a4a3c7eefd1f3a5cd3b176c6ff7e466d5f768eda 100644 (file)
@@ -357,32 +357,34 @@ static int s5m8767_convert_voltage_to_sel(
        return selector;
 }
 
-static inline void s5m8767_set_high(struct s5m8767_info *s5m8767)
+static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
 {
        int temp_index = s5m8767->buck_gpioindex;
 
        gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
        gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
        gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
+
+       return 0;
 }
 
-static inline void s5m8767_set_low(struct s5m8767_info *s5m8767)
+static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
 {
        int temp_index = s5m8767->buck_gpioindex;
 
        gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
        gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
        gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
+
+       return 0;
 }
 
-static int s5m8767_set_voltage(struct regulator_dev *rdev,
-                               int min_uV, int max_uV, unsigned *selector)
+static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
+                                  unsigned selector)
 {
        struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
-       const struct s5m_voltage_desc *desc;
        int reg_id = rdev_get_id(rdev);
-       int sel, reg, mask, ret = 0, old_index, index = 0;
-       u8 val;
+       int reg, mask, ret = 0, old_index, index = 0;
        u8 *buck234_vol = NULL;
 
        switch (reg_id) {
@@ -407,15 +409,9 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       desc = reg_voltage_map[reg_id];
-
-       sel = s5m8767_convert_voltage_to_sel(desc, min_uV, max_uV);
-       if (sel < 0)
-               return sel;
-
        /* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
        if (buck234_vol) {
-               while (*buck234_vol != sel) {
+               while (*buck234_vol != selector) {
                        buck234_vol++;
                        index++;
                }
@@ -423,22 +419,16 @@ static int s5m8767_set_voltage(struct regulator_dev *rdev,
                s5m8767->buck_gpioindex = index;
 
                if (index > old_index)
-                       s5m8767_set_high(s5m8767);
+                       return s5m8767_set_high(s5m8767);
                else
-                       s5m8767_set_low(s5m8767);
+                       return s5m8767_set_low(s5m8767);
        } else {
                ret = s5m8767_get_voltage_register(rdev, &reg);
                if (ret)
                        return ret;
 
-               s5m_reg_read(s5m8767->iodev, reg, &val);
-               val = (val & ~mask) | sel;
-
-               ret = s5m_reg_write(s5m8767->iodev, reg, val);
+               return s5m_reg_update(s5m8767->iodev, reg, selector, mask);
        }
-
-       *selector = sel;
-       return ret;
 }
 
 static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
@@ -463,7 +453,7 @@ static struct regulator_ops s5m8767_ops = {
        .enable                 = s5m8767_reg_enable,
        .disable                = s5m8767_reg_disable,
        .get_voltage_sel        = s5m8767_get_voltage_sel,
-       .set_voltage            = s5m8767_set_voltage,
+       .set_voltage_sel        = s5m8767_set_voltage_sel,
        .set_voltage_time_sel   = s5m8767_set_voltage_time_sel,
 };