icside: remove superfluous ->maskproc method

[inspired by pata_icside]

Enabling/disabling of card IRQs is handled fine by IRQ and IDE
subsystems so there is no need for custom ->maskproc method.

Moreover icside_maskproc() would enable IRQ only if it was already
enabled [because of 'if (state->enabled && !mask)' check].

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index c5269fa1f73328980bce11497850ba4d6497b281..5af3d0ffaf0af972630e9ac09f2cd546969b48be 100644 (file)
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -65,8 +65,6 @@ static struct cardinfo icside_cardinfo_v6_2 = {
 };
 
 struct icside_state {
-       unsigned int channel;
-       unsigned int enabled;
        void __iomem *irq_port;
        void __iomem *ioc_base;
        unsigned int sel;
@@ -116,18 +114,11 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
        struct icside_state *state = ec->irq_data;
        void __iomem *base = state->irq_port;
 
-       state->enabled = 1;
+       writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
+       readb(base + ICS_ARCIN_V6_INTROFFSET_2);
 
-       switch (state->channel) {
-       case 0:
-               writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
-               readb(base + ICS_ARCIN_V6_INTROFFSET_2);
-               break;
-       case 1:
-               writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
-               readb(base + ICS_ARCIN_V6_INTROFFSET_1);
-               break;
-       }
+       writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
+       readb(base + ICS_ARCIN_V6_INTROFFSET_1);
 }
 
 /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
@@ -137,8 +128,6 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
 {
        struct icside_state *state = ec->irq_data;
 
-       state->enabled = 0;
-
        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
        readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
 }
@@ -160,44 +149,6 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = {
        .irqpending     = icside_irqpending_arcin_v6,
 };
 
-/*
- * Handle routing of interrupts.  This is called before
- * we write the command to the drive.
- */
-static void icside_maskproc(ide_drive_t *drive, int mask)
-{
-       ide_hwif_t *hwif = drive->hwif;
-       struct expansion_card *ec = ECARD_DEV(hwif->dev);
-       struct icside_state *state = ecard_get_drvdata(ec);
-       unsigned long flags;
-
-       local_irq_save(flags);
-
-       state->channel = hwif->channel;
-
-       if (state->enabled && !mask) {
-               switch (hwif->channel) {
-               case 0:
-                       writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-                       readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-                       break;
-               case 1:
-                       writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-                       readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-                       break;
-               }
-       } else {
-               readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
-               readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
-       }
-
-       local_irq_restore(flags);
-}
-
-static const struct ide_port_ops icside_v6_no_dma_port_ops = {
-       .maskproc               = icside_maskproc,
-};
-
 #ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 /*
  * SG-DMA support.
@@ -275,7 +226,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 
 static const struct ide_port_ops icside_v6_port_ops = {
        .set_dma_mode           = icside_set_dma_mode,
-       .maskproc               = icside_maskproc,
 };
 
 static void icside_dma_host_set(ide_drive_t *drive, int on)
@@ -319,11 +269,6 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
         */
        BUG_ON(dma_channel_active(ec->dma));
 
-       /*
-        * Ensure that we have the right interrupt routed.
-        */
-       icside_maskproc(drive, 0);
-
        /*
         * Route the DMA signals to the correct interface.
         */
@@ -452,7 +397,6 @@ err_free:
 
 static const struct ide_port_info icside_v6_port_info __initdata = {
        .init_dma               = icside_dma_off_init,
-       .port_ops               = &icside_v6_no_dma_port_ops,
        .dma_ops                = &icside_v6_dma_ops,
        .host_flags             = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
        .mwdma_mask             = ATA_MWDMA2,