USB: Add MSM OTG Controller driver
authorPavankumar Kondeti <pkondeti@codeaurora.org>
Tue, 7 Dec 2010 12:23:55 +0000 (17:53 +0530)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 10 Dec 2010 22:23:31 +0000 (14:23 -0800)
This driver implements PHY initialization, clock management, ULPI IO ops
and simple OTG state machine to kick host/peripheral based on Id/VBUS
line status.  VBUS/Id lines are tied to a reference voltage on some boards.
Hence provide debugfs interface to select host/peripheral mode.

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/otg/Kconfig
drivers/usb/otg/Makefile
drivers/usb/otg/msm72k_otg.c [new file with mode: 0644]
include/linux/usb/msm_hsusb.h [new file with mode: 0644]
include/linux/usb/msm_hsusb_hw.h [new file with mode: 0644]

index 5ce07528cd0c630c3da29b4789d69e1542534cf3..915c729872f8ebb7b4024245918e8d53a5d05ef2 100644 (file)
@@ -81,4 +81,14 @@ config USB_LANGWELL_OTG
          To compile this driver as a module, choose M here: the
          module will be called langwell_otg.
 
+config USB_MSM_OTG_72K
+       tristate "OTG support for Qualcomm on-chip USB controller"
+       depends on (USB || USB_GADGET) && ARCH_MSM
+       select USB_OTG_UTILS
+       help
+         Enable this to support the USB OTG transceiver on MSM chips. It
+         handles PHY initialization, clock management, and workarounds
+         required after resetting the hardware. This driver is required
+         even for peripheral only or host only mode configuration.
+
 endif # USB || OTG
index 66f1b83e4fa784e7bb1493bd3d52d5fd40dc7044..3b1b0960fb6853ae121329487b1e5549a823b9f9 100644 (file)
@@ -15,3 +15,4 @@ obj-$(CONFIG_TWL4030_USB)     += twl4030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)    += nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)         += ulpi.o
+obj-$(CONFIG_USB_MSM_OTG_72K)  += msm72k_otg.o
diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm72k_otg.c
new file mode 100644 (file)
index 0000000..46f468a
--- /dev/null
@@ -0,0 +1,850 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#include <mach/clk.h>
+
+#define MSM_USB_BASE   (motg->regs)
+#define DRIVER_NAME    "msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC   (10 * 1000)
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       int cnt = 0;
+
+       /* initiate read operation */
+       writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+              USB_ULPI_VIEWPORT);
+
+       /* wait for completion */
+       while (cnt < ULPI_IO_TIMEOUT_USEC) {
+               if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+                       break;
+               udelay(1);
+               cnt++;
+       }
+
+       if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+               dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+                       readl(USB_ULPI_VIEWPORT));
+               return -ETIMEDOUT;
+       }
+       return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       int cnt = 0;
+
+       /* initiate write operation */
+       writel(ULPI_RUN | ULPI_WRITE |
+              ULPI_ADDR(reg) | ULPI_DATA(val),
+              USB_ULPI_VIEWPORT);
+
+       /* wait for completion */
+       while (cnt < ULPI_IO_TIMEOUT_USEC) {
+               if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+                       break;
+               udelay(1);
+               cnt++;
+       }
+
+       if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+               dev_err(otg->dev, "ulpi_write: timeout\n");
+               return -ETIMEDOUT;
+       }
+       return 0;
+}
+
+static struct otg_io_access_ops msm_otg_io_ops = {
+       .read = ulpi_read,
+       .write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+       struct msm_otg_platform_data *pdata = motg->pdata;
+       int *seq = pdata->phy_init_seq;
+
+       if (!seq)
+               return;
+
+       while (seq[0] >= 0) {
+               dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+                               seq[0], seq[1]);
+               ulpi_write(&motg->otg, seq[0], seq[1]);
+               seq += 2;
+       }
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+       int ret;
+
+       if (assert) {
+               ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
+               if (ret)
+                       dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
+       } else {
+               ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
+               if (ret)
+                       dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
+       }
+       return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+       int ret;
+
+       ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
+       if (ret) {
+               dev_err(motg->otg.dev, "usb phy clk assert failed\n");
+               return ret;
+       }
+       usleep_range(10000, 12000);
+       ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+       if (ret)
+               dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
+       return ret;
+}
+
+static int msm_otg_phy_reset(struct msm_otg *motg)
+{
+       u32 val;
+       int ret;
+       int retries;
+
+       ret = msm_otg_link_clk_reset(motg, 1);
+       if (ret)
+               return ret;
+       ret = msm_otg_phy_clk_reset(motg);
+       if (ret)
+               return ret;
+       ret = msm_otg_link_clk_reset(motg, 0);
+       if (ret)
+               return ret;
+
+       val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+       writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
+
+       for (retries = 3; retries > 0; retries--) {
+               ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
+                               ULPI_CLR(ULPI_FUNC_CTRL));
+               if (!ret)
+                       break;
+               ret = msm_otg_phy_clk_reset(motg);
+               if (ret)
+                       return ret;
+       }
+       if (!retries)
+               return -ETIMEDOUT;
+
+       /* This reset calibrates the phy, if the above write succeeded */
+       ret = msm_otg_phy_clk_reset(motg);
+       if (ret)
+               return ret;
+
+       for (retries = 3; retries > 0; retries--) {
+               ret = ulpi_read(&motg->otg, ULPI_DEBUG);
+               if (ret != -ETIMEDOUT)
+                       break;
+               ret = msm_otg_phy_clk_reset(motg);
+               if (ret)
+                       return ret;
+       }
+       if (!retries)
+               return -ETIMEDOUT;
+
+       dev_info(motg->otg.dev, "phy_reset: success\n");
+       return 0;
+}
+
+#define LINK_RESET_TIMEOUT_USEC                (250 * 1000)
+static int msm_otg_reset(struct otg_transceiver *otg)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       struct msm_otg_platform_data *pdata = motg->pdata;
+       int cnt = 0;
+       int ret;
+       u32 val = 0;
+       u32 ulpi_val = 0;
+
+       ret = msm_otg_phy_reset(motg);
+       if (ret) {
+               dev_err(otg->dev, "phy_reset failed\n");
+               return ret;
+       }
+
+       ulpi_init(motg);
+
+       writel(USBCMD_RESET, USB_USBCMD);
+       while (cnt < LINK_RESET_TIMEOUT_USEC) {
+               if (!(readl(USB_USBCMD) & USBCMD_RESET))
+                       break;
+               udelay(1);
+               cnt++;
+       }
+       if (cnt >= LINK_RESET_TIMEOUT_USEC)
+               return -ETIMEDOUT;
+
+       /* select ULPI phy */
+       writel(0x80000000, USB_PORTSC);
+
+       msleep(100);
+
+       writel(0x0, USB_AHBBURST);
+       writel(0x00, USB_AHBMODE);
+
+       if (pdata->otg_control == OTG_PHY_CONTROL) {
+               val = readl(USB_OTGSC);
+               if (pdata->mode == USB_OTG) {
+                       ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+                       val |= OTGSC_IDIE | OTGSC_BSVIE;
+               } else if (pdata->mode == USB_PERIPHERAL) {
+                       ulpi_val = ULPI_INT_SESS_VALID;
+                       val |= OTGSC_BSVIE;
+               }
+               writel(val, USB_OTGSC);
+               ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
+               ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
+       }
+
+       return 0;
+}
+
+static void msm_otg_start_host(struct otg_transceiver *otg, int on)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       struct msm_otg_platform_data *pdata = motg->pdata;
+       struct usb_hcd *hcd;
+
+       if (!otg->host)
+               return;
+
+       hcd = bus_to_hcd(otg->host);
+
+       if (on) {
+               dev_dbg(otg->dev, "host on\n");
+
+               if (pdata->vbus_power)
+                       pdata->vbus_power(1);
+               /*
+                * Some boards have a switch cotrolled by gpio
+                * to enable/disable internal HUB. Enable internal
+                * HUB before kicking the host.
+                */
+               if (pdata->setup_gpio)
+                       pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+               usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+#endif
+       } else {
+               dev_dbg(otg->dev, "host off\n");
+
+#ifdef CONFIG_USB
+               usb_remove_hcd(hcd);
+#endif
+               if (pdata->setup_gpio)
+                       pdata->setup_gpio(OTG_STATE_UNDEFINED);
+               if (pdata->vbus_power)
+                       pdata->vbus_power(0);
+       }
+}
+
+static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       struct usb_hcd *hcd;
+
+       /*
+        * Fail host registration if this board can support
+        * only peripheral configuration.
+        */
+       if (motg->pdata->mode == USB_PERIPHERAL) {
+               dev_info(otg->dev, "Host mode is not supported\n");
+               return -ENODEV;
+       }
+
+       if (!host) {
+               if (otg->state == OTG_STATE_A_HOST) {
+                       msm_otg_start_host(otg, 0);
+                       otg->host = NULL;
+                       otg->state = OTG_STATE_UNDEFINED;
+                       schedule_work(&motg->sm_work);
+               } else {
+                       otg->host = NULL;
+               }
+
+               return 0;
+       }
+
+       hcd = bus_to_hcd(host);
+       hcd->power_budget = motg->pdata->power_budget;
+
+       otg->host = host;
+       dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
+
+       /*
+        * Kick the state machine work, if peripheral is not supported
+        * or peripheral is already registered with us.
+        */
+       if (motg->pdata->mode == USB_HOST || otg->gadget)
+               schedule_work(&motg->sm_work);
+
+       return 0;
+}
+
+static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+       struct msm_otg_platform_data *pdata = motg->pdata;
+
+       if (!otg->gadget)
+               return;
+
+       if (on) {
+               dev_dbg(otg->dev, "gadget on\n");
+               /*
+                * Some boards have a switch cotrolled by gpio
+                * to enable/disable internal HUB. Disable internal
+                * HUB before kicking the gadget.
+                */
+               if (pdata->setup_gpio)
+                       pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+               usb_gadget_vbus_connect(otg->gadget);
+       } else {
+               dev_dbg(otg->dev, "gadget off\n");
+               usb_gadget_vbus_disconnect(otg->gadget);
+               if (pdata->setup_gpio)
+                       pdata->setup_gpio(OTG_STATE_UNDEFINED);
+       }
+
+}
+
+static int msm_otg_set_peripheral(struct otg_transceiver *otg,
+                       struct usb_gadget *gadget)
+{
+       struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+
+       /*
+        * Fail peripheral registration if this board can support
+        * only host configuration.
+        */
+       if (motg->pdata->mode == USB_HOST) {
+               dev_info(otg->dev, "Peripheral mode is not supported\n");
+               return -ENODEV;
+       }
+
+       if (!gadget) {
+               if (otg->state == OTG_STATE_B_PERIPHERAL) {
+                       msm_otg_start_peripheral(otg, 0);
+                       otg->gadget = NULL;
+                       otg->state = OTG_STATE_UNDEFINED;
+                       schedule_work(&motg->sm_work);
+               } else {
+                       otg->gadget = NULL;
+               }
+
+               return 0;
+       }
+       otg->gadget = gadget;
+       dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
+
+       /*
+        * Kick the state machine work, if host is not supported
+        * or host is already registered with us.
+        */
+       if (motg->pdata->mode == USB_PERIPHERAL || otg->host)
+               schedule_work(&motg->sm_work);
+
+       return 0;
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+       struct msm_otg_platform_data *pdata = motg->pdata;
+       u32 otgsc = readl(USB_OTGSC);
+
+       switch (pdata->mode) {
+       case USB_OTG:
+               if (pdata->otg_control == OTG_PHY_CONTROL) {
+                       if (otgsc & OTGSC_ID)
+                               set_bit(ID, &motg->inputs);
+                       else
+                               clear_bit(ID, &motg->inputs);
+
+                       if (otgsc & OTGSC_BSV)
+                               set_bit(B_SESS_VLD, &motg->inputs);
+                       else
+                               clear_bit(B_SESS_VLD, &motg->inputs);
+               } else if (pdata->otg_control == OTG_USER_CONTROL) {
+                       if (pdata->default_mode == USB_HOST) {
+                               clear_bit(ID, &motg->inputs);
+                       } else if (pdata->default_mode == USB_PERIPHERAL) {
+                               set_bit(ID, &motg->inputs);
+                               set_bit(B_SESS_VLD, &motg->inputs);
+                       } else {
+                               set_bit(ID, &motg->inputs);
+                               clear_bit(B_SESS_VLD, &motg->inputs);
+                       }
+               }
+               break;
+       case USB_HOST:
+               clear_bit(ID, &motg->inputs);
+               break;
+       case USB_PERIPHERAL:
+               set_bit(ID, &motg->inputs);
+               if (otgsc & OTGSC_BSV)
+                       set_bit(B_SESS_VLD, &motg->inputs);
+               else
+                       clear_bit(B_SESS_VLD, &motg->inputs);
+               break;
+       default:
+               break;
+       }
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+       struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+       struct otg_transceiver *otg = &motg->otg;
+
+       switch (otg->state) {
+       case OTG_STATE_UNDEFINED:
+               dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
+               msm_otg_reset(otg);
+               msm_otg_init_sm(motg);
+               otg->state = OTG_STATE_B_IDLE;
+               /* FALL THROUGH */
+       case OTG_STATE_B_IDLE:
+               dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
+               if (!test_bit(ID, &motg->inputs) && otg->host) {
+                       /* disable BSV bit */
+                       writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+                       msm_otg_start_host(otg, 1);
+                       otg->state = OTG_STATE_A_HOST;
+               } else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) {
+                       msm_otg_start_peripheral(otg, 1);
+                       otg->state = OTG_STATE_B_PERIPHERAL;
+               }
+               break;
+       case OTG_STATE_B_PERIPHERAL:
+               dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
+               if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+                               !test_bit(ID, &motg->inputs)) {
+                       msm_otg_start_peripheral(otg, 0);
+                       otg->state = OTG_STATE_B_IDLE;
+                       msm_otg_reset(otg);
+                       schedule_work(w);
+               }
+               break;
+       case OTG_STATE_A_HOST:
+               dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
+               if (test_bit(ID, &motg->inputs)) {
+                       msm_otg_start_host(otg, 0);
+                       otg->state = OTG_STATE_B_IDLE;
+                       msm_otg_reset(otg);
+                       schedule_work(w);
+               }
+               break;
+       default:
+               break;
+       }
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+       struct msm_otg *motg = data;
+       struct otg_transceiver *otg = &motg->otg;
+       u32 otgsc = 0;
+
+       otgsc = readl(USB_OTGSC);
+       if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+               return IRQ_NONE;
+
+       if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+               if (otgsc & OTGSC_ID)
+                       set_bit(ID, &motg->inputs);
+               else
+                       clear_bit(ID, &motg->inputs);
+               dev_dbg(otg->dev, "ID set/clear\n");
+       } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+               if (otgsc & OTGSC_BSV)
+                       set_bit(B_SESS_VLD, &motg->inputs);
+               else
+                       clear_bit(B_SESS_VLD, &motg->inputs);
+               dev_dbg(otg->dev, "BSV set/clear\n");
+       }
+
+       writel(otgsc, USB_OTGSC);
+       schedule_work(&motg->sm_work);
+       return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+       struct msm_otg *motg = s->private;
+       struct otg_transceiver *otg = &motg->otg;
+
+       switch (otg->state) {
+       case OTG_STATE_A_HOST:
+               seq_printf(s, "host\n");
+               break;
+       case OTG_STATE_B_PERIPHERAL:
+               seq_printf(s, "peripheral\n");
+               break;
+       default:
+               seq_printf(s, "none\n");
+               break;
+       }
+
+       return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+       return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+                               size_t count, loff_t *ppos)
+{
+       struct msm_otg *motg = file->private_data;
+       char buf[16];
+       struct otg_transceiver *otg = &motg->otg;
+       int status = count;
+       enum usb_mode_type req_mode;
+
+       memset(buf, 0x00, sizeof(buf));
+
+       if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+               status = -EFAULT;
+               goto out;
+       }
+
+       if (!strncmp(buf, "host", 4)) {
+               req_mode = USB_HOST;
+       } else if (!strncmp(buf, "peripheral", 10)) {
+               req_mode = USB_PERIPHERAL;
+       } else if (!strncmp(buf, "none", 4)) {
+               req_mode = USB_NONE;
+       } else {
+               status = -EINVAL;
+               goto out;
+       }
+
+       switch (req_mode) {
+       case USB_NONE:
+               switch (otg->state) {
+               case OTG_STATE_A_HOST:
+               case OTG_STATE_B_PERIPHERAL:
+                       set_bit(ID, &motg->inputs);
+                       clear_bit(B_SESS_VLD, &motg->inputs);
+                       break;
+               default:
+                       goto out;
+               }
+               break;
+       case USB_PERIPHERAL:
+               switch (otg->state) {
+               case OTG_STATE_B_IDLE:
+               case OTG_STATE_A_HOST:
+                       set_bit(ID, &motg->inputs);
+                       set_bit(B_SESS_VLD, &motg->inputs);
+                       break;
+               default:
+                       goto out;
+               }
+               break;
+       case USB_HOST:
+               switch (otg->state) {
+               case OTG_STATE_B_IDLE:
+               case OTG_STATE_B_PERIPHERAL:
+                       clear_bit(ID, &motg->inputs);
+                       break;
+               default:
+                       goto out;
+               }
+               break;
+       default:
+               goto out;
+       }
+
+       schedule_work(&motg->sm_work);
+out:
+       return status;
+}
+
+const struct file_operations msm_otg_mode_fops = {
+       .open = msm_otg_mode_open,
+       .read = seq_read,
+       .write = msm_otg_mode_write,
+       .llseek = seq_lseek,
+       .release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+       msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+       if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+               return -ENODEV;
+
+       msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+                               msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+       if (!msm_otg_dbg_mode) {
+               debugfs_remove(msm_otg_dbg_root);
+               msm_otg_dbg_root = NULL;
+               return -ENODEV;
+       }
+
+       return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+       debugfs_remove(msm_otg_dbg_mode);
+       debugfs_remove(msm_otg_dbg_root);
+}
+
+static int __init msm_otg_probe(struct platform_device *pdev)
+{
+       int ret = 0;
+       struct resource *res;
+       struct msm_otg *motg;
+       struct otg_transceiver *otg;
+
+       dev_info(&pdev->dev, "msm_otg probe\n");
+       if (!pdev->dev.platform_data) {
+               dev_err(&pdev->dev, "No platform data given. Bailing out\n");
+               return -ENODEV;
+       }
+
+       motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+       if (!motg) {
+               dev_err(&pdev->dev, "unable to allocate msm_otg\n");
+               return -ENOMEM;
+       }
+
+       motg->pdata = pdev->dev.platform_data;
+       otg = &motg->otg;
+       otg->dev = &pdev->dev;
+
+       motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+       if (IS_ERR(motg->phy_reset_clk)) {
+               dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+               ret = PTR_ERR(motg->phy_reset_clk);
+               goto free_motg;
+       }
+
+       motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+       if (IS_ERR(motg->clk)) {
+               dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+               ret = PTR_ERR(motg->clk);
+               goto put_phy_reset_clk;
+       }
+
+       motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+       if (IS_ERR(motg->pclk)) {
+               dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+               ret = PTR_ERR(motg->pclk);
+               goto put_clk;
+       }
+
+       /*
+        * USB core clock is not present on all MSM chips. This
+        * clock is introduced to remove the dependency on AXI
+        * bus frequency.
+        */
+       motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
+       if (IS_ERR(motg->core_clk))
+               motg->core_clk = NULL;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "failed to get platform resource mem\n");
+               ret = -ENODEV;
+               goto put_core_clk;
+       }
+
+       motg->regs = ioremap(res->start, resource_size(res));
+       if (!motg->regs) {
+               dev_err(&pdev->dev, "ioremap failed\n");
+               ret = -ENOMEM;
+               goto put_core_clk;
+       }
+       dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+       motg->irq = platform_get_irq(pdev, 0);
+       if (!motg->irq) {
+               dev_err(&pdev->dev, "platform_get_irq failed\n");
+               ret = -ENODEV;
+               goto free_regs;
+       }
+
+       clk_enable(motg->clk);
+       clk_enable(motg->pclk);
+       if (motg->core_clk)
+               clk_enable(motg->core_clk);
+
+       writel(0, USB_USBINTR);
+       writel(0, USB_OTGSC);
+
+       INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+       ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+                                       "msm_otg", motg);
+       if (ret) {
+               dev_err(&pdev->dev, "request irq failed\n");
+               goto disable_clks;
+       }
+
+       otg->init = msm_otg_reset;
+       otg->set_host = msm_otg_set_host;
+       otg->set_peripheral = msm_otg_set_peripheral;
+
+       otg->io_ops = &msm_otg_io_ops;
+
+       ret = otg_set_transceiver(&motg->otg);
+       if (ret) {
+               dev_err(&pdev->dev, "otg_set_transceiver failed\n");
+               goto free_irq;
+       }
+
+       platform_set_drvdata(pdev, motg);
+       device_init_wakeup(&pdev->dev, 1);
+
+       if (motg->pdata->mode == USB_OTG &&
+                       motg->pdata->otg_control == OTG_USER_CONTROL) {
+               ret = msm_otg_debugfs_init(motg);
+               if (ret)
+                       dev_dbg(&pdev->dev, "mode debugfs file is"
+                                       "not available\n");
+       }
+
+       return 0;
+
+free_irq:
+       free_irq(motg->irq, motg);
+disable_clks:
+       clk_disable(motg->pclk);
+       clk_disable(motg->clk);
+free_regs:
+       iounmap(motg->regs);
+put_core_clk:
+       if (motg->core_clk)
+               clk_put(motg->core_clk);
+       clk_put(motg->pclk);
+put_clk:
+       clk_put(motg->clk);
+put_phy_reset_clk:
+       clk_put(motg->phy_reset_clk);
+free_motg:
+       kfree(motg);
+       return ret;
+}
+
+static int __devexit msm_otg_remove(struct platform_device *pdev)
+{
+       struct msm_otg *motg = platform_get_drvdata(pdev);
+       struct otg_transceiver *otg = &motg->otg;
+
+       if (otg->host || otg->gadget)
+               return -EBUSY;
+
+       msm_otg_debugfs_cleanup();
+       cancel_work_sync(&motg->sm_work);
+       device_init_wakeup(&pdev->dev, 0);
+       otg_set_transceiver(NULL);
+
+       free_irq(motg->irq, motg);
+
+       clk_disable(motg->pclk);
+       clk_disable(motg->clk);
+       if (motg->core_clk)
+               clk_disable(motg->core_clk);
+
+       iounmap(motg->regs);
+
+       clk_put(motg->phy_reset_clk);
+       clk_put(motg->pclk);
+       clk_put(motg->clk);
+       if (motg->core_clk)
+               clk_put(motg->core_clk);
+
+       kfree(motg);
+
+       return 0;
+}
+
+static struct platform_driver msm_otg_driver = {
+       .remove = __devexit_p(msm_otg_remove),
+       .driver = {
+               .name = DRIVER_NAME,
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init msm_otg_init(void)
+{
+       return platform_driver_probe(&msm_otg_driver, msm_otg_probe);
+}
+
+static void __exit msm_otg_exit(void)
+{
+       platform_driver_unregister(&msm_otg_driver);
+}
+
+module_init(msm_otg_init);
+module_exit(msm_otg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
new file mode 100644 (file)
index 0000000..b796df9
--- /dev/null
@@ -0,0 +1,108 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+
+/**
+ * Supported USB modes
+ *
+ * USB_PERIPHERAL       Only peripheral mode is supported.
+ * USB_HOST             Only host mode is supported.
+ * USB_OTG              OTG mode is supported.
+ *
+ */
+enum usb_mode_type {
+       USB_NONE = 0,
+       USB_PERIPHERAL,
+       USB_HOST,
+       USB_OTG,
+};
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL      Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL     Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL    Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL    Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+       OTG_NO_CONTROL = 0,
+       OTG_PHY_CONTROL,
+       OTG_PMIC_CONTROL,
+       OTG_USER_CONTROL,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm72k_otg driver.
+ * @phy_init_seq: PHY configuration sequence. val, reg pairs
+ *              terminated by -1.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ * @default_mode: Default operational mode. Applicable only if
+ *              OTG switch is controller by user.
+ *
+ */
+struct msm_otg_platform_data {
+       int *phy_init_seq;
+       void (*vbus_power)(bool on);
+       unsigned power_budget;
+       enum usb_mode_type mode;
+       enum otg_control_type otg_control;
+       enum usb_mode_type default_mode;
+       void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @phy_reset_clk: clock struct of usb_phy_clk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ *
+ */
+struct msm_otg {
+       struct otg_transceiver otg;
+       struct msm_otg_platform_data *pdata;
+       int irq;
+       struct clk *clk;
+       struct clk *pclk;
+       struct clk *phy_reset_clk;
+       struct clk *core_clk;
+       void __iomem *regs;
+#define ID             0
+#define B_SESS_VLD     1
+       unsigned long inputs;
+       struct work_struct sm_work;
+};
+
+#endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
new file mode 100644 (file)
index 0000000..b061cff
--- /dev/null
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
+#define __LINUX_USB_GADGET_MSM72K_UDC_H__
+
+#ifdef CONFIG_ARCH_MSM7X00A
+#define USB_SBUSCFG          (MSM_USB_BASE + 0x0090)
+#else
+#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
+#endif
+#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
+
+#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
+#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
+
+#define USBCMD_RESET   2
+#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
+#define PORTSC_PTS_MASK         (3 << 30)
+#define PORTSC_PTS_ULPI         (3 << 30)
+
+#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN              (1 << 30)
+#define ULPI_WRITE            (1 << 29)
+#define ULPI_READ             (0 << 29)
+#define ULPI_ADDR(n)          (((n) & 255) << 16)
+#define ULPI_DATA(n)          ((n) & 255)
+#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
+
+/* OTG definitions */
+#define OTGSC_INTSTS_MASK      (0x7f << 16)
+#define OTGSC_ID               (1 << 8)
+#define OTGSC_BSV              (1 << 11)
+#define OTGSC_IDIS             (1 << 16)
+#define OTGSC_BSVIS            (1 << 19)
+#define OTGSC_IDIE             (1 << 24)
+#define OTGSC_BSVIE            (1 << 27)
+
+#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */