add sdio wifi power
author林辉辉 <lhh@rock-chips.com>
Thu, 3 Jun 2010 03:00:59 +0000 (03:00 +0000)
committer黄涛 <huangtao@rock-chips.com>
Mon, 21 Jun 2010 05:35:22 +0000 (13:35 +0800)
arch/arm/mach-rk2818/board-midsdk.c
drivers/mmc/host/rk2818-sdmmc.c
drivers/net/wireless/libertas/Makefile
drivers/net/wireless/libertas/if_sdio.c [deleted file]
drivers/net/wireless/libertas/if_sdio1.c
drivers/net/wireless/libertas/wifi_power.c [new file with mode: 0644]
drivers/net/wireless/libertas/wifi_power.h [new file with mode: 0644]
drivers/net/wireless/wlan/wlan.c

index 2ea8b427e34a10d95c6c677bcb0c1008c6b50eb4..a7dc2cf26d5f054715b7818f4c15b1c3b0a3717d 100644 (file)
@@ -162,7 +162,7 @@ void rk2818_sdmmc1_cfg_gpio(struct platform_device *dev)
 {
        rk2818_mux_api_set(GPIOG_MMC1_SEL_NAME, IOMUXA_SDMMC1_CMD_DATA0_CLKOUT);
        rk2818_mux_api_set(GPIOG_MMC1D_SEL_NAME, IOMUXA_SDMMC1_DATA123);
-#if 1
+#if 0
        /* wifi power up (gpio control) */
        rk2818_mux_api_set(GPIOH7_HSADCCLK_SEL_NAME,IOMUXB_GPIO1_D7);
        rk2818_mux_api_set(GPIOF5_APWM3_DPWM3_NAME,IOMUXB_GPIO1_B5);
index d9a14aeac32940264f7e3513b4f26bbe6a38fd46..ae7c9307a1bf81312fe354e88c61d00ce7640032 100644 (file)
@@ -38,6 +38,8 @@
 
 #include "rk2818-sdmmc.h"
 
+struct mmc_host *wifi_mmc_host = NULL;
+
 #define RK2818_MCI_DATA_ERROR_FLAGS    (SDMMC_INT_DRTO | SDMMC_INT_DCRC | SDMMC_INT_HTO | SDMMC_INT_SBE | SDMMC_INT_EBE)
 #define RK2818_MCI_CMD_ERROR_FLAGS     (SDMMC_INT_RTO | SDMMC_INT_RCRC | SDMMC_INT_RE | SDMMC_INT_HLE)
 #define RK2818_MCI_ERROR_FLAGS         (RK2818_MCI_DATA_ERROR_FLAGS | RK2818_MCI_CMD_ERROR_FLAGS | SDMMC_INT_HLE)
@@ -1300,6 +1302,8 @@ static int rk2818_sdmmc_probe(struct platform_device *pdev)
 
        dev_info(&pdev->dev, "RK2818 MMC controller used as %s, at irq %d\n", 
                                host->dma_name, host->irq);
+       if (strncmp(host->dma_name, "sdio", 4) == 0)
+               wifi_mmc_host = mmc;
 
        return 0;
 
@@ -1321,6 +1325,9 @@ static int __exit rk2818_sdmmc_remove(struct platform_device *pdev)
 {
        struct rk2818_sdmmc_host *host = platform_get_drvdata(pdev);
 
+       if (strncmp(host->dma_name, "sdio", 4) == 0)
+               wifi_mmc_host = NULL;
+
        writel(0xFFFFFFFF, host->regs + SDMMC_RINTSTS);
        writel(0, host->regs + SDMMC_INTMASK); // disable all mmc interrupt first
 
index d2cb7eff6d54ac20ae9044012d0ef67280a13237..2079e36c8521b00045f6e4ce394a279de05e86ee 100644 (file)
@@ -9,5 +9,5 @@ libertas_spi-objs += if_spi.o
 obj-$(CONFIG_LIBERTAS)     += libertas.o
 obj-$(CONFIG_LIBERTAS_USB) += usb8xxx.o
 obj-$(CONFIG_LIBERTAS_CS)  += libertas_cs.o
-obj-$(CONFIG_LIBERTAS_SDIO) += libertas_sdio.o
+obj-$(CONFIG_LIBERTAS_SDIO) += libertas_sdio.o wifi_power.o
 obj-$(CONFIG_LIBERTAS_SPI) += libertas_spi.o
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
deleted file mode 100644 (file)
index 485a8d4..0000000
+++ /dev/null
@@ -1,1168 +0,0 @@
-/*
- *  linux/drivers/net/wireless/libertas/if_sdio.c
- *
- *  Copyright 2007-2008 Pierre Ossman
- *
- * Inspired by if_cs.c, Copyright 2007 Holger Schurig
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This hardware has more or less no CMD53 support, so all registers
- * must be accessed using sdio_readb()/sdio_writeb().
- *
- * Transfers must be in one transaction or the firmware goes bonkers.
- * This means that the transfer must either be small enough to do a
- * byte based transfer or it must be padded to a multiple of the
- * current block size.
- *
- * As SDIO is still new to the kernel, it is unfortunately common with
- * bugs in the host controllers related to that. One such bug is that
- * controllers cannot do transfers that aren't a multiple of 4 bytes.
- * If you don't have time to fix the host controller driver, you can
- * work around the problem by modifying if_sdio_host_to_card() and
- * if_sdio_card_to_host() to pad the data.
- */
-
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/firmware.h>
-#include <linux/netdevice.h>
-#include <linux/delay.h>
-#include <linux/mmc/card.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/mmc/sdio_ids.h>
-
-#include "host.h"
-#include "decl.h"
-#include "defs.h"
-#include "dev.h"
-#include "cmd.h"
-#include "if_sdio.h"
-
-/* The if_sdio_remove() callback function is called when
- * user removes this module from kernel space or ejects
- * the card from the slot. The driver handles these 2 cases
- * differently for SD8688 combo chip.
- * If the user is removing the module, the FUNC_SHUTDOWN
- * command for SD8688 is sent to the firmware.
- * If the card is removed, there is no need to send this command.
- *
- * The variable 'user_rmmod' is used to distinguish these two
- * scenarios. This flag is initialized as FALSE in case the card
- * is removed, and will be set to TRUE for module removal when
- * module_exit function is called.
- */
-static u8 user_rmmod;
-
-static char *lbs_helper_name = NULL;
-module_param_named(helper_name, lbs_helper_name, charp, 0644);
-
-static char *lbs_fw_name = NULL;
-module_param_named(fw_name, lbs_fw_name, charp, 0644);
-
-static const struct sdio_device_id if_sdio_ids[] = {
-       { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
-                       SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
-       { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
-                       SDIO_DEVICE_ID_MARVELL_8688WLAN) },
-       { /* end: all zeroes */                         },
-};
-
-MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
-
-struct if_sdio_model {
-       int model;
-       const char *helper;
-       const char *firmware;
-};
-
-static struct if_sdio_model if_sdio_models[] = {
-       {
-               /* 8385 */
-               .model = IF_SDIO_MODEL_8385,
-               .helper = "sd8385_helper.bin",
-               .firmware = "sd8385.bin",
-       },
-       {
-               /* 8686 */
-               .model = IF_SDIO_MODEL_8686,
-               .helper = "sd8686_helper.bin",
-               .firmware = "sd8686.bin",
-       },
-       {
-               /* 8688 */
-               .model = IF_SDIO_MODEL_8688,
-               .helper = "sd8688_helper.bin",
-               .firmware = "sd8688.bin",
-       },
-};
-
-struct if_sdio_packet {
-       struct if_sdio_packet   *next;
-       u16                     nb;
-       u8                      buffer[0] __attribute__((aligned(4)));
-};
-
-struct if_sdio_card {
-       struct sdio_func        *func;
-       struct lbs_private      *priv;
-
-       int                     model;
-       unsigned long           ioport;
-       unsigned int            scratch_reg;
-
-       const char              *helper;
-       const char              *firmware;
-
-       u8                      buffer[65536];
-
-       spinlock_t              lock;
-       struct if_sdio_packet   *packets;
-
-       struct workqueue_struct *workqueue;
-       struct work_struct      packet_worker;
-
-       u8                      rx_unit;
-};
-
-/********************************************************************/
-/* I/O                                                              */
-/********************************************************************/
-
-/*
- *  For SD8385/SD8686, this function reads firmware status after
- *  the image is downloaded, or reads RX packet length when
- *  interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
- *  For SD8688, this function reads firmware status only.
- */
-static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
-{
-       int ret;
-       u16 scratch;
-
-       scratch = sdio_readb(card->func, card->scratch_reg, &ret);
-       if (!ret)
-               scratch |= sdio_readb(card->func, card->scratch_reg + 1,
-                                       &ret) << 8;
-
-       if (err)
-               *err = ret;
-
-       if (ret)
-               return 0xffff;
-
-       return scratch;
-}
-
-static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
-{
-       int ret;
-       u8 rx_unit;
-
-       rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
-
-       if (ret)
-               rx_unit = 0;
-
-       return rx_unit;
-}
-
-static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
-{
-       int ret;
-       u16 rx_len;
-
-       switch (card->model) {
-       case IF_SDIO_MODEL_8385:
-       case IF_SDIO_MODEL_8686:
-               rx_len = if_sdio_read_scratch(card, &ret);
-               break;
-       case IF_SDIO_MODEL_8688:
-       default: /* for newer chipsets */
-               rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
-               if (!ret)
-                       rx_len <<= card->rx_unit;
-               else
-                       rx_len = 0xffff;        /* invalid length */
-
-               break;
-       }
-
-       if (err)
-               *err = ret;
-
-       return rx_len;
-}
-
-static int if_sdio_handle_cmd(struct if_sdio_card *card,
-               u8 *buffer, unsigned size)
-{
-       struct lbs_private *priv = card->priv;
-       int ret;
-       unsigned long flags;
-       u8 i;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       if (size > LBS_CMD_BUFFER_SIZE) {
-               lbs_deb_sdio("response packet too large (%d bytes)\n",
-                       (int)size);
-               ret = -E2BIG;
-               goto out;
-       }
-
-       spin_lock_irqsave(&priv->driver_lock, flags);
-
-       i = (priv->resp_idx == 0) ? 1 : 0;
-       BUG_ON(priv->resp_len[i]);
-       priv->resp_len[i] = size;
-       memcpy(priv->resp_buf[i], buffer, size);
-       lbs_notify_command_response(priv, i);
-
-       spin_unlock_irqrestore(&card->priv->driver_lock, flags);
-
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-       return ret;
-}
-
-static int if_sdio_handle_data(struct if_sdio_card *card,
-               u8 *buffer, unsigned size)
-{
-       int ret;
-       struct sk_buff *skb;
-       char *data;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       if (size > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
-               lbs_deb_sdio("response packet too large (%d bytes)\n",
-                       (int)size);
-               ret = -E2BIG;
-               goto out;
-       }
-
-       skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
-       if (!skb) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       skb_reserve(skb, NET_IP_ALIGN);
-
-       data = skb_put(skb, size);
-
-       memcpy(data, buffer, size);
-
-       lbs_process_rxed_packet(card->priv, skb);
-
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static int if_sdio_handle_event(struct if_sdio_card *card,
-               u8 *buffer, unsigned size)
-{
-       int ret;
-       u32 event;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       if (card->model == IF_SDIO_MODEL_8385) {
-               event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
-               if (ret)
-                       goto out;
-
-               /* right shift 3 bits to get the event id */
-               event >>= 3;
-       } else {
-               if (size < 4) {
-                       lbs_deb_sdio("event packet too small (%d bytes)\n",
-                               (int)size);
-                       ret = -EINVAL;
-                       goto out;
-               }
-               event = buffer[3] << 24;
-               event |= buffer[2] << 16;
-               event |= buffer[1] << 8;
-               event |= buffer[0] << 0;
-       }
-
-       lbs_queue_event(card->priv, event & 0xFF);
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static int if_sdio_card_to_host(struct if_sdio_card *card)
-{
-       int ret;
-       u8 status;
-       u16 size, type, chunk;
-       unsigned long timeout;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       size = if_sdio_read_rx_len(card, &ret);
-       if (ret)
-               goto out;
-
-       if (size < 4) {
-               lbs_deb_sdio("invalid packet size (%d bytes) from firmware\n",
-                       (int)size);
-               ret = -EINVAL;
-               goto out;
-       }
-
-       timeout = jiffies + HZ;
-       while (1) {
-               status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-               if (ret)
-                       goto out;
-               if (status & IF_SDIO_IO_RDY)
-                       break;
-               if (time_after(jiffies, timeout)) {
-                       ret = -ETIMEDOUT;
-                       goto out;
-               }
-               mdelay(1);
-       }
-
-       /*
-        * The transfer must be in one transaction or the firmware
-        * goes suicidal. There's no way to guarantee that for all
-        * controllers, but we can at least try.
-        */
-       chunk = sdio_align_size(card->func, size);
-
-       ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk);
-       if (ret)
-               goto out;
-
-       chunk = card->buffer[0] | (card->buffer[1] << 8);
-       type = card->buffer[2] | (card->buffer[3] << 8);
-
-       lbs_deb_sdio("packet of type %d and size %d bytes\n",
-               (int)type, (int)chunk);
-
-       if (chunk > size) {
-               lbs_deb_sdio("packet fragment (%d > %d)\n",
-                       (int)chunk, (int)size);
-               ret = -EINVAL;
-               goto out;
-       }
-
-       if (chunk < size) {
-               lbs_deb_sdio("packet fragment (%d < %d)\n",
-                       (int)chunk, (int)size);
-       }
-
-       switch (type) {
-       case MVMS_CMD:
-               ret = if_sdio_handle_cmd(card, card->buffer + 4, chunk - 4);
-               if (ret)
-                       goto out;
-               break;
-       case MVMS_DAT:
-               ret = if_sdio_handle_data(card, card->buffer + 4, chunk - 4);
-               if (ret)
-                       goto out;
-               break;
-       case MVMS_EVENT:
-               ret = if_sdio_handle_event(card, card->buffer + 4, chunk - 4);
-               if (ret)
-                       goto out;
-               break;
-       default:
-               lbs_deb_sdio("invalid type (%d) from firmware\n",
-                               (int)type);
-               ret = -EINVAL;
-               goto out;
-       }
-
-out:
-       if (ret)
-               lbs_pr_err("problem fetching packet from firmware\n");
-
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static void if_sdio_host_to_card_worker(struct work_struct *work)
-{
-       struct if_sdio_card *card;
-       struct if_sdio_packet *packet;
-       unsigned long timeout;
-       u8 status;
-       int ret;
-       unsigned long flags;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       card = container_of(work, struct if_sdio_card, packet_worker);
-
-       while (1) {
-               spin_lock_irqsave(&card->lock, flags);
-               packet = card->packets;
-               if (packet)
-                       card->packets = packet->next;
-               spin_unlock_irqrestore(&card->lock, flags);
-
-               if (!packet)
-                       break;
-
-               sdio_claim_host(card->func);
-
-               timeout = jiffies + HZ;
-               while (1) {
-                       status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-                       if (ret)
-                               goto release;
-                       if (status & IF_SDIO_IO_RDY)
-                               break;
-                       if (time_after(jiffies, timeout)) {
-                               ret = -ETIMEDOUT;
-                               goto release;
-                       }
-                       mdelay(1);
-               }
-
-               ret = sdio_writesb(card->func, card->ioport,
-                               packet->buffer, packet->nb);
-               if (ret)
-                       goto release;
-release:
-               sdio_release_host(card->func);
-
-               kfree(packet);
-       }
-
-       lbs_deb_leave(LBS_DEB_SDIO);
-}
-
-/********************************************************************/
-/* Firmware                                                         */
-/********************************************************************/
-
-static int if_sdio_prog_helper(struct if_sdio_card *card)
-{
-       int ret;
-       u8 status;
-       const struct firmware *fw;
-       unsigned long timeout;
-       u8 *chunk_buffer;
-       u32 chunk_size;
-       const u8 *firmware;
-       size_t size;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       ret = request_firmware(&fw, card->helper, &card->func->dev);
-       if (ret) {
-               lbs_pr_err("can't load helper firmware\n");
-               goto out;
-       }
-
-       chunk_buffer = kzalloc(64, GFP_KERNEL);
-       if (!chunk_buffer) {
-               ret = -ENOMEM;
-               goto release_fw;
-       }
-
-       sdio_claim_host(card->func);
-
-       ret = sdio_set_block_size(card->func, 32);
-       if (ret)
-               goto release;
-
-       firmware = fw->data;
-       size = fw->size;
-
-       while (size) {
-               timeout = jiffies + HZ;
-               while (1) {
-                       status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-                       if (ret)
-                               goto release;
-                       if ((status & IF_SDIO_IO_RDY) &&
-                                       (status & IF_SDIO_DL_RDY))
-                               break;
-                       if (time_after(jiffies, timeout)) {
-                               ret = -ETIMEDOUT;
-                               goto release;
-                       }
-                       mdelay(1);
-               }
-
-               chunk_size = min(size, (size_t)60);
-
-               *((__le32*)chunk_buffer) = cpu_to_le32(chunk_size);
-               memcpy(chunk_buffer + 4, firmware, chunk_size);
-/*
-               lbs_deb_sdio("sending %d bytes chunk\n", chunk_size);
-*/
-               ret = sdio_writesb(card->func, card->ioport,
-                               chunk_buffer, 64);
-               if (ret)
-                       goto release;
-
-               firmware += chunk_size;
-               size -= chunk_size;
-       }
-
-       /* an empty block marks the end of the transfer */
-       memset(chunk_buffer, 0, 4);
-       ret = sdio_writesb(card->func, card->ioport, chunk_buffer, 64);
-       if (ret)
-               goto release;
-
-       lbs_deb_sdio("waiting for helper to boot...\n");
-
-       /* wait for the helper to boot by looking at the size register */
-       timeout = jiffies + HZ;
-       while (1) {
-               u16 req_size;
-
-               req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
-               if (ret)
-                       goto release;
-
-               req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
-               if (ret)
-                       goto release;
-
-               if (req_size != 0)
-                       break;
-
-               if (time_after(jiffies, timeout)) {
-                       ret = -ETIMEDOUT;
-                       goto release;
-               }
-
-               msleep(10);
-       }
-
-       ret = 0;
-
-release:
-       sdio_release_host(card->func);
-       kfree(chunk_buffer);
-release_fw:
-       release_firmware(fw);
-
-out:
-       if (ret)
-               lbs_pr_err("failed to load helper firmware\n");
-
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static int if_sdio_prog_real(struct if_sdio_card *card)
-{
-       int ret;
-       u8 status;
-       const struct firmware *fw;
-       unsigned long timeout;
-       u8 *chunk_buffer;
-       u32 chunk_size;
-       const u8 *firmware;
-       size_t size, req_size;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       ret = request_firmware(&fw, card->firmware, &card->func->dev);
-       if (ret) {
-               lbs_pr_err("can't load firmware\n");
-               goto out;
-       }
-
-       chunk_buffer = kzalloc(512, GFP_KERNEL);
-       if (!chunk_buffer) {
-               ret = -ENOMEM;
-               goto release_fw;
-       }
-
-       sdio_claim_host(card->func);
-
-       ret = sdio_set_block_size(card->func, 32);
-       if (ret)
-               goto release;
-
-       firmware = fw->data;
-       size = fw->size;
-
-       while (size) {
-               timeout = jiffies + HZ;
-               while (1) {
-                       status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
-                       if (ret)
-                               goto release;
-                       if ((status & IF_SDIO_IO_RDY) &&
-                                       (status & IF_SDIO_DL_RDY))
-                               break;
-                       if (time_after(jiffies, timeout)) {
-                               ret = -ETIMEDOUT;
-                               goto release;
-                       }
-                       mdelay(1);
-               }
-
-               req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
-               if (ret)
-                       goto release;
-
-               req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
-               if (ret)
-                       goto release;
-/*
-               lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
-*/
-               if (req_size == 0) {
-                       lbs_deb_sdio("firmware helper gave up early\n");
-                       ret = -EIO;
-                       goto release;
-               }
-
-               if (req_size & 0x01) {
-                       lbs_deb_sdio("firmware helper signalled error\n");
-                       ret = -EIO;
-                       goto release;
-               }
-
-               if (req_size > size)
-                       req_size = size;
-
-               while (req_size) {
-                       chunk_size = min(req_size, (size_t)512);
-
-                       memcpy(chunk_buffer, firmware, chunk_size);
-/*
-                       lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n",
-                               chunk_size, (chunk_size + 31) / 32 * 32);
-*/
-                       ret = sdio_writesb(card->func, card->ioport,
-                               chunk_buffer, roundup(chunk_size, 32));
-                       if (ret)
-                               goto release;
-
-                       firmware += chunk_size;
-                       size -= chunk_size;
-                       req_size -= chunk_size;
-               }
-       }
-
-       ret = 0;
-
-       lbs_deb_sdio("waiting for firmware to boot...\n");
-
-       /* wait for the firmware to boot */
-       timeout = jiffies + HZ;
-       while (1) {
-               u16 scratch;
-
-               scratch = if_sdio_read_scratch(card, &ret);
-               if (ret)
-                       goto release;
-
-               if (scratch == IF_SDIO_FIRMWARE_OK)
-                       break;
-
-               if (time_after(jiffies, timeout)) {
-                       ret = -ETIMEDOUT;
-                       goto release;
-               }
-
-               msleep(10);
-       }
-
-       ret = 0;
-
-release:
-       sdio_release_host(card->func);
-       kfree(chunk_buffer);
-release_fw:
-       release_firmware(fw);
-
-out:
-       if (ret)
-               lbs_pr_err("failed to load firmware\n");
-
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static int if_sdio_prog_firmware(struct if_sdio_card *card)
-{
-       int ret;
-       u16 scratch;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       sdio_claim_host(card->func);
-       scratch = if_sdio_read_scratch(card, &ret);
-       sdio_release_host(card->func);
-
-       if (ret)
-               goto out;
-
-       lbs_deb_sdio("firmware status = %#x\n", scratch);
-
-       if (scratch == IF_SDIO_FIRMWARE_OK) {
-               lbs_deb_sdio("firmware already loaded\n");
-               goto success;
-       }
-
-       ret = if_sdio_prog_helper(card);
-       if (ret)
-               goto out;
-
-       ret = if_sdio_prog_real(card);
-       if (ret)
-               goto out;
-
-success:
-       sdio_claim_host(card->func);
-       sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
-       sdio_release_host(card->func);
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-/*******************************************************************/
-/* Libertas callbacks                                              */
-/*******************************************************************/
-
-static int if_sdio_host_to_card(struct lbs_private *priv,
-               u8 type, u8 *buf, u16 nb)
-{
-       int ret;
-       struct if_sdio_card *card;
-       struct if_sdio_packet *packet, *cur;
-       u16 size;
-       unsigned long flags;
-
-       lbs_deb_enter_args(LBS_DEB_SDIO, "type %d, bytes %d", type, nb);
-
-       card = priv->card;
-
-       if (nb > (65536 - sizeof(struct if_sdio_packet) - 4)) {
-               ret = -EINVAL;
-               goto out;
-       }
-
-       /*
-        * The transfer must be in one transaction or the firmware
-        * goes suicidal. There's no way to guarantee that for all
-        * controllers, but we can at least try.
-        */
-       size = sdio_align_size(card->func, nb + 4);
-
-       packet = kzalloc(sizeof(struct if_sdio_packet) + size,
-                       GFP_ATOMIC);
-       if (!packet) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       packet->next = NULL;
-       packet->nb = size;
-
-       /*
-        * SDIO specific header.
-        */
-       packet->buffer[0] = (nb + 4) & 0xff;
-       packet->buffer[1] = ((nb + 4) >> 8) & 0xff;
-       packet->buffer[2] = type;
-       packet->buffer[3] = 0;
-
-       memcpy(packet->buffer + 4, buf, nb);
-
-       spin_lock_irqsave(&card->lock, flags);
-
-       if (!card->packets)
-               card->packets = packet;
-       else {
-               cur = card->packets;
-               while (cur->next)
-                       cur = cur->next;
-               cur->next = packet;
-       }
-
-       switch (type) {
-       case MVMS_CMD:
-               priv->dnld_sent = DNLD_CMD_SENT;
-               break;
-       case MVMS_DAT:
-               priv->dnld_sent = DNLD_DATA_SENT;
-               break;
-       default:
-               lbs_deb_sdio("unknown packet type %d\n", (int)type);
-       }
-
-       spin_unlock_irqrestore(&card->lock, flags);
-
-       queue_work(card->workqueue, &card->packet_worker);
-
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-/*******************************************************************/
-/* SDIO callbacks                                                  */
-/*******************************************************************/
-
-static void if_sdio_interrupt(struct sdio_func *func)
-{
-       int ret;
-       struct if_sdio_card *card;
-       u8 cause;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       card = sdio_get_drvdata(func);
-
-       cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
-       if (ret)
-               goto out;
-
-       lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
-
-       sdio_writeb(card->func, ~cause, IF_SDIO_H_INT_STATUS, &ret);
-       if (ret)
-               goto out;
-
-       /*
-        * Ignore the define name, this really means the card has
-        * successfully received the command.
-        */
-       if (cause & IF_SDIO_H_INT_DNLD)
-               lbs_host_to_card_done(card->priv);
-
-
-       if (cause & IF_SDIO_H_INT_UPLD) {
-               ret = if_sdio_card_to_host(card);
-               if (ret)
-                       goto out;
-       }
-
-       ret = 0;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-}
-
-static int if_sdio_probe(struct sdio_func *func,
-               const struct sdio_device_id *id)
-{
-       struct if_sdio_card *card;
-       struct lbs_private *priv;
-       int ret, i;
-       unsigned int model;
-       struct if_sdio_packet *packet;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       for (i = 0;i < func->card->num_info;i++) {
-               if (sscanf(func->card->info[i],
-                               "802.11 SDIO ID: %x", &model) == 1)
-                       break;
-               if (sscanf(func->card->info[i],
-                               "ID: %x", &model) == 1)
-                       break;
-               if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
-                       model = IF_SDIO_MODEL_8385;
-                       break;
-               }
-       }
-
-       if (i == func->card->num_info) {
-               lbs_pr_err("unable to identify card model\n");
-               return -ENODEV;
-       }
-
-       card = kzalloc(sizeof(struct if_sdio_card), GFP_KERNEL);
-       if (!card)
-               return -ENOMEM;
-
-       card->func = func;
-       card->model = model;
-
-       switch (card->model) {
-       case IF_SDIO_MODEL_8385:
-               card->scratch_reg = IF_SDIO_SCRATCH_OLD;
-               break;
-       case IF_SDIO_MODEL_8686:
-               card->scratch_reg = IF_SDIO_SCRATCH;
-               break;
-       case IF_SDIO_MODEL_8688:
-       default: /* for newer chipsets */
-               card->scratch_reg = IF_SDIO_FW_STATUS;
-               break;
-       }
-
-       spin_lock_init(&card->lock);
-       card->workqueue = create_workqueue("libertas_sdio");
-       INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
-
-       for (i = 0;i < ARRAY_SIZE(if_sdio_models);i++) {
-               if (card->model == if_sdio_models[i].model)
-                       break;
-       }
-
-       if (i == ARRAY_SIZE(if_sdio_models)) {
-               lbs_pr_err("unkown card model 0x%x\n", card->model);
-               ret = -ENODEV;
-               goto free;
-       }
-
-       card->helper = if_sdio_models[i].helper;
-       card->firmware = if_sdio_models[i].firmware;
-
-       if (lbs_helper_name) {
-               lbs_deb_sdio("overriding helper firmware: %s\n",
-                       lbs_helper_name);
-               card->helper = lbs_helper_name;
-       }
-
-       if (lbs_fw_name) {
-               lbs_deb_sdio("overriding firmware: %s\n", lbs_fw_name);
-               card->firmware = lbs_fw_name;
-       }
-
-       sdio_claim_host(func);
-
-       ret = sdio_enable_func(func);
-       if (ret)
-               goto release;
-
-       ret = sdio_claim_irq(func, if_sdio_interrupt);
-       if (ret)
-               goto disable;
-
-       card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
-       if (ret)
-               goto release_int;
-
-       card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
-       if (ret)
-               goto release_int;
-
-       card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
-       if (ret)
-               goto release_int;
-
-       sdio_release_host(func);
-
-       sdio_set_drvdata(func, card);
-
-       lbs_deb_sdio("class = 0x%X, vendor = 0x%X, "
-                       "device = 0x%X, model = 0x%X, ioport = 0x%X\n",
-                       func->class, func->vendor, func->device,
-                       model, (unsigned)card->ioport);
-
-       ret = if_sdio_prog_firmware(card);
-       if (ret)
-               goto reclaim;
-
-       priv = lbs_add_card(card, &func->dev);
-       if (!priv) {
-               ret = -ENOMEM;
-               goto reclaim;
-       }
-
-       card->priv = priv;
-
-       priv->card = card;
-       priv->hw_host_to_card = if_sdio_host_to_card;
-
-       priv->fw_ready = 1;
-
-       sdio_claim_host(func);
-
-       /*
-        * Get rx_unit if the chip is SD8688 or newer.
-        * SD8385 & SD8686 do not have rx_unit.
-        */
-       if ((card->model != IF_SDIO_MODEL_8385)
-                       && (card->model != IF_SDIO_MODEL_8686))
-               card->rx_unit = if_sdio_read_rx_unit(card);
-       else
-               card->rx_unit = 0;
-
-       /*
-        * Enable interrupts now that everything is set up
-        */
-       sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
-       sdio_release_host(func);
-       if (ret)
-               goto reclaim;
-
-       /*
-        * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
-        */
-       if (card->model == IF_SDIO_MODEL_8688) {
-               struct cmd_header cmd;
-
-               memset(&cmd, 0, sizeof(cmd));
-
-               lbs_deb_sdio("send function INIT command\n");
-               if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
-                               lbs_cmd_copyback, (unsigned long) &cmd))
-                       lbs_pr_alert("CMD_FUNC_INIT cmd failed\n");
-       }
-
-       ret = lbs_start_card(priv);
-       if (ret)
-               goto err_activate_card;
-
-out:
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-
-err_activate_card:
-       flush_workqueue(card->workqueue);
-       lbs_remove_card(priv);
-reclaim:
-       sdio_claim_host(func);
-release_int:
-       sdio_release_irq(func);
-disable:
-       sdio_disable_func(func);
-release:
-       sdio_release_host(func);
-free:
-       destroy_workqueue(card->workqueue);
-       while (card->packets) {
-               packet = card->packets;
-               card->packets = card->packets->next;
-               kfree(packet);
-       }
-
-       kfree(card);
-
-       goto out;
-}
-
-static void if_sdio_remove(struct sdio_func *func)
-{
-       struct if_sdio_card *card;
-       struct if_sdio_packet *packet;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       card = sdio_get_drvdata(func);
-
-       if (user_rmmod && (card->model == IF_SDIO_MODEL_8688)) {
-               /*
-                * FUNC_SHUTDOWN is required for SD8688 WLAN/BT
-                * multiple functions
-                */
-               struct cmd_header cmd;
-
-               memset(&cmd, 0, sizeof(cmd));
-
-               lbs_deb_sdio("send function SHUTDOWN command\n");
-               if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
-                               &cmd, sizeof(cmd), lbs_cmd_copyback,
-                               (unsigned long) &cmd))
-                       lbs_pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
-       }
-
-
-       lbs_deb_sdio("call remove card\n");
-       lbs_stop_card(card->priv);
-       lbs_remove_card(card->priv);
-       card->priv->surpriseremoved = 1;
-
-       flush_workqueue(card->workqueue);
-       destroy_workqueue(card->workqueue);
-
-       sdio_claim_host(func);
-       sdio_release_irq(func);
-       sdio_disable_func(func);
-       sdio_release_host(func);
-
-       while (card->packets) {
-               packet = card->packets;
-               card->packets = card->packets->next;
-               kfree(packet);
-       }
-
-       kfree(card);
-
-       lbs_deb_leave(LBS_DEB_SDIO);
-}
-
-static struct sdio_driver if_sdio_driver = {
-       .name           = "libertas_sdio",
-       .id_table       = if_sdio_ids,
-       .probe          = if_sdio_probe,
-       .remove         = if_sdio_remove,
-};
-
-/*******************************************************************/
-/* Module functions                                                */
-/*******************************************************************/
-
-static int __init if_sdio_init_module(void)
-{
-       int ret = 0;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
-       printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
-
-       ret = sdio_register_driver(&if_sdio_driver);
-
-       /* Clear the flag in case user removes the card. */
-       user_rmmod = 0;
-
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
-
-       return ret;
-}
-
-static void __exit if_sdio_exit_module(void)
-{
-       lbs_deb_enter(LBS_DEB_SDIO);
-
-       /* Set the flag as user is removing this module. */
-       user_rmmod = 1;
-
-       sdio_unregister_driver(&if_sdio_driver);
-
-       lbs_deb_leave(LBS_DEB_SDIO);
-}
-
-module_init(if_sdio_init_module);
-module_exit(if_sdio_exit_module);
-
-MODULE_DESCRIPTION("Libertas SDIO WLAN Driver");
-MODULE_AUTHOR("Pierre Ossman");
-MODULE_LICENSE("GPL");
index eddb65c14aaae789e10289f68149d41b602b6fc4..90a47d35032a0ae1e4110a0156153fd8949469a4 100755 (executable)
@@ -34,6 +34,7 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/host.h>
 
 #include "host.h"
 #include "decl.h"
@@ -41,6 +42,9 @@
 #include "dev.h"
 #include "cmd.h"
 #include "if_sdio.h"
+#include "wifi_power.h"
+
+extern struct mmc_host *wifi_mmc_host;
 
 /* The if_sdio_remove() callback function is called when
  * user removes this module from kernel space or ejects
@@ -1141,21 +1145,48 @@ static struct sdio_driver if_sdio_driver = {
 
 //static int __init if_sdio_init_module2(void)
 //void if_sdio_init_module2(struct work_struct *work)
+int wifi_no_power_gpio = 0;  /* 0-No 1-Yes */
 void if_sdio_init_module2(void)
 {
-       int ret = 0;
-
-       lbs_deb_enter(LBS_DEB_SDIO);
+       int ret = 0,timeout;
+       
+       wifi_sdio_func = NULL;
+       wifi_no_power_gpio = 0;
+       
+       //lbs_deb_enter(LBS_DEB_SDIO);
 
        printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
        printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
 
-       ret = sdio_register_driver(&if_sdio_driver);
-
        /* Clear the flag in case user removes the card. */
        user_rmmod = 0;
-
-       lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+       ///lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+       
+       ret = sdio_register_driver(&if_sdio_driver);
+       
+#ifdef WIFI_GPIO_POWER_CONTROL 
+       if (wifi_mmc_host->bus_ops != NULL) /* mmc/card is attached already. */
+       {
+               printk("SDIO maybe be attached already.\n");
+               wifi_no_power_gpio = 1;
+               return ;
+       }
+       
+       wifi_turn_on_card();
+       wifi_power_up_wifi();
+       
+       mmc_detect_change(wifi_mmc_host, 2);
+       
+       for (timeout = 100; timeout >=0; timeout--)
+       {
+           if (wifi_sdio_func != NULL)
+               break;
+           msleep(50);
+       }
+       if (timeout <= 0)
+          printk("No WiFi function card has been attached.\n");
+#endif
+       return ;
 }
 EXPORT_SYMBOL(if_sdio_init_module2);
 
@@ -1173,20 +1204,47 @@ static int __init if_sdio_init_module(void)
 #endif
 
 
-static void __exit if_sdio_exit_module(void)
+void if_sdio_exit_module(void)
 {
+       int timeout;
+       
        lbs_deb_enter(LBS_DEB_SDIO);
 
        /* Set the flag as user is removing this module. */
        user_rmmod = 1;
 
        sdio_unregister_driver(&if_sdio_driver);
+       
+#ifdef WIFI_GPIO_POWER_CONTROL
 
+       if (wifi_no_power_gpio == 1)
+           return;
+           
+       if (wifi_mmc_host == NULL)
+       {
+           printk("No SDIO host is present.\n");
+           return;
+       }
+       
+       wifi_power_down_wifi();
+       wifi_turn_off_card();
+       
+       mmc_detect_change(wifi_mmc_host, 2);
+       
+       for (timeout = 50; timeout >= 0; timeout--)
+       {
+               msleep(100);
+               if (wifi_mmc_host->bus_ops == NULL)
+               break;
+       }
+       if (timeout < 0)
+               printk("Fail to release SDIO card.\n");
+#endif
        lbs_deb_leave(LBS_DEB_SDIO);
 }
-
+EXPORT_SYMBOL(if_sdio_exit_module);
 //module_init(if_sdio_init_module);
-module_exit(if_sdio_exit_module);
+//module_exit(if_sdio_exit_module);
 
 MODULE_DESCRIPTION("Libertas SDIO WLAN Driver");
 MODULE_AUTHOR("Pierre Ossman");
diff --git a/drivers/net/wireless/libertas/wifi_power.c b/drivers/net/wireless/libertas/wifi_power.c
new file mode 100644 (file)
index 0000000..e56fbac
--- /dev/null
@@ -0,0 +1,110 @@
+/*
+ * wifi_power.c
+ *
+ * Power control for WIFI module.
+ *
+ * There are Power supply and Power Up/Down controls for WIFI typically.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include "wifi_power.h"
+#if (WIFI_GPIO_POWER_CONTROL == 1)
+struct wifi_power power_gpio = 
+{
+       POWER_USE_GPIO, POWER_GPIO_IOMUX, GPIOH7_HSADCCLK_SEL_NAME,
+       IOMUXB_GPIO1_D7, RK2818_PIN_PH7, GPIO_HIGH
+       
+};
+
+struct wifi_power power_save_gpio = 
+{
+       0, 0, 0, 0, 0, 0
+}; 
+
+int wifi_gpio_operate(struct wifi_power *gpio, int flag)
+{
+       int sensitive;
+
+       if (gpio->use_gpio == POWER_NOT_USE_GPIO)
+               return 0;       
+       if (gpio->gpio_iomux == POWER_GPIO_IOMUX)
+       {
+               rk2818_mux_api_set(gpio->iomux_name, gpio->iomux_value);
+       }
+       
+       if (flag == GPIO_SWITCH_ON)
+               sensitive = gpio->sensi_level;
+       else
+               sensitive = 1 - gpio->sensi_level;
+       gpio_request(gpio->gpio_id, "wifi_power");      
+       gpio_direction_output(gpio->gpio_id,sensitive);
+       return 0;
+}
+
+
+int wifi_turn_on_card(void)
+{
+       
+       if (wifi_gpio_operate(&power_gpio, GPIO_SWITCH_ON) != 0)
+       {
+               printk("Couldn't set GPIO [ON] successfully for power supply.\n");
+               return -1;
+       }
+       
+       return 0;
+}
+
+int wifi_turn_off_card(void)
+{
+       
+       if (wifi_gpio_operate(&power_gpio, GPIO_SWITCH_OFF) != 0)
+       {
+               printk("Couldn't set GPIO [OFF] successfully for power supply.\n");
+               return -1;
+       }
+       
+       return 0;
+}
+
+int wifi_power_up_wifi(void)
+{
+
+       if (wifi_gpio_operate(&power_save_gpio, GPIO_SWITCH_ON) != 0)
+       {
+               printk("Couldn't set GPIO [ON] successfully for power up.\n");
+               return -1;
+       }
+       mdelay(5);
+       
+       if (wifi_gpio_operate(&power_save_gpio, GPIO_SWITCH_OFF) != 0)
+       {
+               printk("Couldn't set GPIO [ON] successfully for power up.\n");
+               return -1;
+       }
+       msleep(150);
+
+       if (wifi_gpio_operate(&power_save_gpio, GPIO_SWITCH_ON) != 0)
+       {
+               printk("Couldn't set GPIO [ON] successfully for power up.\n");
+               return -1;
+       }
+       msleep(50);
+
+       return 0;
+}
+
+int wifi_power_down_wifi(void)
+{
+       if (wifi_gpio_operate(&power_save_gpio, GPIO_SWITCH_OFF) != 0)
+       {
+               printk("Couldn't set GPIO [OFF] successfully for power down.\n");
+               return -1;
+       }
+       
+       return 0;
+}
+
+#endif /* WIFI_GPIO_POWER_CONTROL */
+
diff --git a/drivers/net/wireless/libertas/wifi_power.h b/drivers/net/wireless/libertas/wifi_power.h
new file mode 100644 (file)
index 0000000..d90a510
--- /dev/null
@@ -0,0 +1,56 @@
+/*
+ * wifi_power.h
+ *
+ * WIFI power control.
+ *
+ * Yongle Lai
+ */
+
+#ifndef WIFI_POWER_H
+#define WIFI_POWER_H
+
+#define WIFI_GPIO_POWER_CONTROL 1
+
+#if (WIFI_GPIO_POWER_CONTROL == 1)
+
+#include <mach/gpio.h>
+#include <mach/iomux.h>
+
+#define POWER_NOT_USE_GPIO             0
+#define POWER_USE_GPIO                         1
+
+#define POWER_GPIO_NOT_IOMUX   0
+#define POWER_GPIO_IOMUX                       1
+
+#define GPIO_SWITCH_OFF                                0
+#define GPIO_SWITCH_ON                         1
+
+struct wifi_power
+{
+       u8 use_gpio;                    /* If uses GPIO to control wifi power supply. 0 - no, 1 - yes. */
+       u8 gpio_iomux;          /* If the GPIO is iomux. 0 - no, 1 - yes. */
+       char *iomux_name;       /* IOMUX name */
+       u8      iomux_value;    /* IOMUX value - which function is choosen. */
+       u8      gpio_id;                        /* GPIO number */
+       u8      sensi_level;    /* GPIO sensitive level. */
+};
+
+/*
+ * Power supply via control GPIO.
+ */
+#define POWER_VIA_GPIO                 1               /*  */
+#define POWER_GPIO_MUTEX               1                                                               /* 1 - GPIO is a io mutexed IO */
+#define POWER_GPIO_MUTEX_NAME          GPIOH6_IQ_SEL_NAME
+#define POWER_GPIO_MUTEXT_VAL          IOMUXB_GPIO1_D6
+#define POWER_GPIO_ID                                          GPIOPortH_Pin6
+#define POWER_LEVEL_SENSITIVE          GPIO_HIGH
+
+int wifi_turn_on_card(void);
+int wifi_turn_off_card(void);
+int wifi_power_up_wifi(void);
+int wifi_power_down_wifi(void);
+int wifi_power_reset(void);
+
+#endif /* WIFI_GPIO_POWER_CONTROL */
+
+#endif /* WIFI_POWER_H */
index 97af40b29b83eba7a4dd152f42dd628b5a898763..e9f37fceeef0c77cf89b2f1ef058bf3b85cbd10b 100644 (file)
@@ -3,6 +3,7 @@
 #include <linux/module.h>
 
 extern void if_sdio_init_module2(void);
+extern void if_sdio_exit_module(void);
 
 static int wlan_init_module(void)
 {
@@ -12,6 +13,12 @@ static int wlan_init_module(void)
        return 0;
 }
 
-module_init(wlan_init_module);
+static int wlan_exit_module(void)
+{
+       printk("move wlan driver..........\n");
+       if_sdio_exit_module();
 
-//module_exit(wlan_exit_module);
+       return 0;
+}
+module_init(wlan_init_module);
+module_exit(wlan_exit_module);