ARM: sun4i: dt: Add support for the INet-97F_Rev_02 board
authorDavid Lanzendörfer <david.lanzendoerfer@o2s.ch>
Sat, 1 Mar 2014 19:26:38 +0000 (20:26 +0100)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Tue, 4 Mar 2014 16:47:03 +0000 (17:47 +0100)
This patch adds basic support for the INet-97F_Rev_02 board found in various
low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02)

Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts [new file with mode: 0644]

index 5cddd54972b0317ebd5a49460a7b45eb08572b46..1bf946fd7113d32565199fdae95d20083969ae54 100644 (file)
@@ -282,6 +282,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
        sun4i-a10-cubieboard.dtb \
        sun4i-a10-mini-xplus.dtb \
        sun4i-a10-hackberry.dtb \
+       sun4i-a10-inet97fv2.dtb \
        sun4i-a10-olinuxino-lime.dtb \
        sun4i-a10-pcduino.dtb \
        sun5i-a10s-olinuxino-micro.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
new file mode 100644 (file)
index 0000000..fe9272e
--- /dev/null
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+       model = "INet-97F Rev 02";
+       compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       soc@01c00000 {
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins_a>;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1c000 {
+                       status = "okay";
+               };
+
+               ohci1: usb@01c1c400 {
+                       status = "okay";
+               };
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               status = "okay";
+       };
+};