[SCSI] Revert "[SCSI] qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
authorJoe Carnuccio <joe.carnuccio@qlogic.com>
Fri, 8 Feb 2013 06:57:56 +0000 (01:57 -0500)
committerJames Bottomley <JBottomley@Parallels.com>
Fri, 22 Feb 2013 12:55:45 +0000 (12:55 +0000)
This reverts commit 4dc77c36f86c2dc4e3f483146d33b64d12c0da3f.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
drivers/scsi/qla2xxx/qla_init.c

index 8888d9b8473c568f5ff3f82b721e56c5de17cca6..51f007f27fd8a6ff3d7252dbcdb9558e883fbdaf 100644 (file)
@@ -3159,7 +3159,7 @@ static int
 qla2x00_configure_fabric(scsi_qla_host_t *vha)
 {
        int     rval;
-       fc_port_t       *fcport;
+       fc_port_t       *fcport, *fcptemp;
        uint16_t        next_loopid;
        uint16_t        mb[MAILBOX_REGISTER_COUNT];
        uint16_t        loop_id;
@@ -3197,7 +3197,7 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
                    0xfc, mb, BIT_1|BIT_0);
                if (rval != QLA_SUCCESS) {
                        set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
-                       break;
+                       return rval;
                }
                if (mb[0] != MBS_COMMAND_COMPLETE) {
                        ql_dbg(ql_dbg_disc, vha, 0x2042,
@@ -3233,12 +3233,10 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
                if (rval != QLA_SUCCESS)
                        break;
 
-               /* Add new ports to existing port list */
-               list_splice_tail_init(&new_fcports, &vha->vp_fcports);
-
-               /* Starting free loop ID. */
-               next_loopid = ha->min_external_loopid;
-
+               /*
+                * Logout all previous fabric devices marked lost, except
+                * FCP2 devices.
+                */
                list_for_each_entry(fcport, &vha->vp_fcports, list) {
                        if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
                                break;
@@ -3246,7 +3244,6 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
                        if ((fcport->flags & FCF_FABRIC_DEVICE) == 0)
                                continue;
 
-                       /* Logout lost/gone fabric devices (non-FCP2) */
                        if (fcport->scan_state != QLA_FCPORT_SCAN_FOUND &&
                            atomic_read(&fcport->state) == FCS_ONLINE) {
                                qla2x00_mark_device_lost(vha, fcport,
@@ -3260,30 +3257,76 @@ qla2x00_configure_fabric(scsi_qla_host_t *vha)
                                            fcport->d_id.b.domain,
                                            fcport->d_id.b.area,
                                            fcport->d_id.b.al_pa);
+                                       fcport->loop_id = FC_NO_LOOP_ID;
                                }
                                continue;
                        }
                        fcport->scan_state = QLA_FCPORT_SCAN_NONE;
+               }
 
-                       /* Login fabric devices that need a login */
-                       if ((fcport->flags & FCF_LOGIN_NEEDED) != 0 &&
-                           atomic_read(&vha->loop_down_timer) == 0) {
-                               if (fcport->loop_id == FC_NO_LOOP_ID) {
-                                       fcport->loop_id = next_loopid;
-                                       rval = qla2x00_find_new_loop_id(
-                                           base_vha, fcport);
-                                       if (rval != QLA_SUCCESS) {
-                                               /* Ran out of IDs to use */
-                                               continue;
-                                       }
+               /* Starting free loop ID. */
+               next_loopid = ha->min_external_loopid;
+
+               /*
+                * Scan through our port list and login entries that need to be
+                * logged in.
+                */
+               list_for_each_entry(fcport, &vha->vp_fcports, list) {
+                       if (atomic_read(&vha->loop_down_timer) ||
+                           test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
+                               break;
+
+                       if ((fcport->flags & FCF_FABRIC_DEVICE) == 0 ||
+                           (fcport->flags & FCF_LOGIN_NEEDED) == 0)
+                               continue;
+
+                       if (fcport->loop_id == FC_NO_LOOP_ID) {
+                               fcport->loop_id = next_loopid;
+                               rval = qla2x00_find_new_loop_id(
+                                   base_vha, fcport);
+                               if (rval != QLA_SUCCESS) {
+                                       /* Ran out of IDs to use */
+                                       break;
                                }
                        }
+                       /* Login and update database */
+                       qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
+               }
+
+               /* Exit if out of loop IDs. */
+               if (rval != QLA_SUCCESS) {
+                       break;
+               }
+
+               /*
+                * Login and add the new devices to our port list.
+                */
+               list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
+                       if (atomic_read(&vha->loop_down_timer) ||
+                           test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))
+                               break;
+
+                       /* Find a new loop ID to use. */
+                       fcport->loop_id = next_loopid;
+                       rval = qla2x00_find_new_loop_id(base_vha, fcport);
+                       if (rval != QLA_SUCCESS) {
+                               /* Ran out of IDs to use */
+                               break;
+                       }
 
                        /* Login and update database */
                        qla2x00_fabric_dev_login(vha, fcport, &next_loopid);
+
+                       list_move_tail(&fcport->list, &vha->vp_fcports);
                }
        } while (0);
 
+       /* Free all new device structures not processed. */
+       list_for_each_entry_safe(fcport, fcptemp, &new_fcports, list) {
+               list_del(&fcport->list);
+               kfree(fcport);
+       }
+
        if (rval) {
                ql_dbg(ql_dbg_disc, vha, 0x2068,
                    "Configure fabric error exit rval=%d.\n", rval);