machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
-machine-$(CONFIG_ARCH_MX25) := mx25
+machine-$(CONFIG_ARCH_MX25) := imx
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
config IMX_HAVE_DMA_V1
bool
-if ARCH_MX1
-
config SOC_IMX1
+ bool
select CPU_ARM920T
select IMX_HAVE_DMA_V1
select IMX_HAVE_IOMUX_V1
+
+config SOC_IMX21
+ bool
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+
+config SOC_IMX25
+ bool
+ select CPU_ARM926T
+ select ARCH_MXC_IOMUX_V3
+ select HAVE_FB_IMX
+ select ARCH_MXC_AUDMUX_V2
+
+config SOC_IMX27
bool
+ select CPU_ARM926T
+ select ARCH_MXC_AUDMUX_V1
+ select IMX_HAVE_DMA_V1
+ select IMX_HAVE_IOMUX_V1
+
+if ARCH_MX1
comment "MX1 platforms:"
config MACH_MXLADS
if ARCH_MX2
-config SOC_IMX21
- select CPU_ARM926T
- select ARCH_MXC_AUDMUX_V1
- select IMX_HAVE_DMA_V1
- select IMX_HAVE_IOMUX_V1
- bool
-
-config SOC_IMX27
- select CPU_ARM926T
- select ARCH_MXC_AUDMUX_V1
- select IMX_HAVE_DMA_V1
- select IMX_HAVE_IOMUX_V1
- bool
-
choice
prompt "CPUs:"
default MACH_MX21
endif
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+ bool "Support MX25PDK (3DS) Platform"
+ select SOC_IMX25
+ select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMXDI_RTC
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+
+config MACH_EUKREA_CPUIMX25
+ bool "Support Eukrea CPUIMX25 Platform"
+ select SOC_IMX25
+ select IMX_HAVE_PLATFORM_ESDHC
+ select IMX_HAVE_PLATFORM_FLEXCAN
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMXDI_RTC
+ select IMX_HAVE_PLATFORM_IMX_FB
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select MXC_ULPI if USB_ULPI
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX25
+ default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+ bool "Eukrea MBIMXSD development board"
+ select IMX_HAVE_PLATFORM_IMX_SSI
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+endif
+
if MACH_MX27
comment "MX27 platforms:"
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
+zreladdr-$(CONFIG_ARCH_MX25) := 0x80008000
+params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
+
zreladdr-$(CONFIG_MACH_MX27) := 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
--- /dev/null
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+ ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+ return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+ unsigned long rate = get_rate_mpll();
+
+ if (cctl & (1 << 14))
+ rate = (rate * 3) >> 2;
+
+ return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+ return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+ return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+ unsigned long ofs = (per & 0x3) * 8;
+ unsigned long reg = per & ~0x3;
+ unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+ unsigned long fref;
+
+ if (readl(CRM_BASE + 0x64) & (1 << per))
+ fref = get_rate_upll();
+ else
+ fref = get_rate_ahb(NULL);
+
+ return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+ return get_rate_per(15);
+}
+
+static unsigned long get_rate_ssi2(struct clk *clk)
+{
+ return get_rate_per(14);
+}
+
+static unsigned long get_rate_ssi1(struct clk *clk)
+{
+ return get_rate_per(13);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+ return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+ return get_rate_per(8);
+}
+
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+ return get_rate_per(5);
+}
+
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+ return get_rate_per(7);
+}
+
+static unsigned long get_rate_esdhc1(struct clk *clk)
+{
+ return get_rate_per(3);
+}
+
+static unsigned long get_rate_esdhc2(struct clk *clk)
+{
+ return get_rate_per(4);
+}
+
+static unsigned long get_rate_csi(struct clk *clk)
+{
+ return get_rate_per(0);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+ unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+ unsigned long rate = get_rate_upll();
+
+ return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg |= 1 << clk->enable_shift;
+ __raw_writel(reg, clk->enable_reg);
+
+ return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+ u32 reg;
+
+ reg = __raw_readl(clk->enable_reg);
+ reg &= ~(1 << clk->enable_shift);
+ __raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
+ static struct clk name = { \
+ .id = i, \
+ .enable_reg = CRM_BASE + er, \
+ .enable_shift = es, \
+ .get_rate = gr, \
+ .set_rate = sr, \
+ .enable = clk_cgcr_enable, \
+ .disable = clk_cgcr_disable, \
+ .secondary = s, \
+ }
+
+/*
+ * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
+ * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
+ * taken from the Freescale released BSP.
+ *
+ * bit reg offset clock
+ *
+ * 0 CGCR1 0 AUDMUX
+ * 12 CGCR1 12 ESAI
+ * 16 CGCR1 16 GPIO1
+ * 17 CGCR1 17 GPIO2
+ * 18 CGCR1 18 GPIO3
+ * 23 CGCR1 23 I2C1
+ * 24 CGCR1 24 I2C2
+ * 25 CGCR1 25 I2C3
+ * 27 CGCR1 27 IOMUXC
+ * 28 CGCR1 28 KPP
+ * 30 CGCR1 30 OWIRE
+ * 36 CGCR2 4 RTIC
+ * 51 CGCR2 19 WDOG
+ */
+
+DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL);
+DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL,
+ &esdhc1_ahb_clk);
+DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL);
+DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL,
+ &esdhc2_ahb_clk);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
+DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
+DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
+DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
+DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
+DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
+ &esdhc1_per_clk);
+DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
+ &esdhc2_per_clk);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
+DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
+DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+ { \
+ .dev_id = d, \
+ .con_id = n, \
+ .clk = &c, \
+ },
+
+static struct clk_lookup lookups[] = {
+ _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+ _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+ _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+ _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+ _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+ _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+ _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+ _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+ _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+ _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
+ _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+ _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+ _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+ _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+ _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
+ _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+ _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
+ _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+ _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
+ _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
+};
+
+int __init mx25_clocks_init(void)
+{
+ clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+ /* Turn off all clocks except the ones we need to survive, namely:
+ * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+ * SCC
+ */
+ __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+ __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+ __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
+ clk_enable(&uart1_clk);
+#endif
+
+ /* Clock source for lcdc and csi is upll */
+ __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
+ CRM_BASE + 0x64);
+
+ mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx25.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_fec_data imx25_fec_data __initconst;
+#define imx25_add_fec(pdata) \
+ imx_add_fec(&imx25_fec_data, pdata)
+
+extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+#define imx25_add_flexcan(id, pdata) \
+ imx_add_flexcan(&imx25_flexcan_data[id], pdata)
+#define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata)
+#define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+#define imx25_add_fsl_usb2_udc(pdata) \
+ imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
+
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+#define imx25_add_imxdi_rtc(pdata) \
+ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
+
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+#define imx25_add_imx2_wdt(pdata) \
+ imx_add_imx2_wdt(&imx25_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+#define imx25_add_imx_fb(pdata) \
+ imx_add_imx_fb(&imx25_imx_fb_data, pdata)
+
+extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
+#define imx25_add_imx_i2c(id, pdata) \
+ imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
+#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
+#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
+#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
+
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+#define imx25_add_imx_keypad(pdata) \
+ imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
+
+extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
+#define imx25_add_imx_ssi(id, pdata) \
+ imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
+
+extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
+#define imx25_add_imx_uart(id, pdata) \
+ imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
+#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
+#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
+#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
+#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
+#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
+
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+#define imx25_add_mx2_camera(pdata) \
+ imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+#define imx25_add_mxc_ehci_otg(pdata) \
+ imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+#define imx25_add_mxc_ehci_hs(pdata) \
+ imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
+
+extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
+#define imx25_add_mxc_nand(pdata) \
+ imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
+
+extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+#define imx25_add_spi_imx(id, pdata) \
+ imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
+#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
+#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
+#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
+
+extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
+#define imx25_add_esdhc(id, pdata) \
+ imx_add_esdhc(&imx25_esdhc_data[id], pdata)
--- /dev/null
+/*
+ * Copyright (C) 2010 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <video/platform_lcd.h>
+
+#include <mach/hardware.h>
+#include <mach/iomux-mx25.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mx25.h>
+#include <mach/imx-uart.h>
+#include <mach/audmux.h>
+
+#include "devices-imx25.h"
+
+static struct pad_desc eukrea_mbimxsd_pads[] = {
+ /* LCD */
+ MX25_PAD_LD0__LD0,
+ MX25_PAD_LD1__LD1,
+ MX25_PAD_LD2__LD2,
+ MX25_PAD_LD3__LD3,
+ MX25_PAD_LD4__LD4,
+ MX25_PAD_LD5__LD5,
+ MX25_PAD_LD6__LD6,
+ MX25_PAD_LD7__LD7,
+ MX25_PAD_LD8__LD8,
+ MX25_PAD_LD9__LD9,
+ MX25_PAD_LD10__LD10,
+ MX25_PAD_LD11__LD11,
+ MX25_PAD_LD12__LD12,
+ MX25_PAD_LD13__LD13,
+ MX25_PAD_LD14__LD14,
+ MX25_PAD_LD15__LD15,
+ MX25_PAD_GPIO_E__LD16,
+ MX25_PAD_GPIO_F__LD17,
+ MX25_PAD_HSYNC__HSYNC,
+ MX25_PAD_VSYNC__VSYNC,
+ MX25_PAD_LSCLK__LSCLK,
+ MX25_PAD_OE_ACD__OE_ACD,
+ MX25_PAD_CONTRAST__CONTRAST,
+ /* LCD_PWR */
+ MX25_PAD_PWM__GPIO_1_26,
+ /* LED */
+ MX25_PAD_POWER_FAIL__GPIO_3_19,
+ /* SWITCH */
+ MX25_PAD_VSTBY_ACK__GPIO_3_18,
+ /* UART2 */
+ MX25_PAD_UART2_RTS__UART2_RTS,
+ MX25_PAD_UART2_CTS__UART2_CTS,
+ MX25_PAD_UART2_TXD__UART2_TXD,
+ MX25_PAD_UART2_RXD__UART2_RXD,
+ /* SD1 */
+ MX25_PAD_SD1_CMD__SD1_CMD,
+ MX25_PAD_SD1_CLK__SD1_CLK,
+ MX25_PAD_SD1_DATA0__SD1_DATA0,
+ MX25_PAD_SD1_DATA1__SD1_DATA1,
+ MX25_PAD_SD1_DATA2__SD1_DATA2,
+ MX25_PAD_SD1_DATA3__SD1_DATA3,
+ /* SD1 CD */
+ MX25_PAD_DE_B__GPIO_2_20,
+ /* I2S */
+ MX25_PAD_KPP_COL3__AUD5_TXFS,
+ MX25_PAD_KPP_COL2__AUD5_TXC,
+ MX25_PAD_KPP_COL1__AUD5_RXD,
+ MX25_PAD_KPP_COL0__AUD5_TXD,
+ /* CAN */
+ MX25_PAD_GPIO_D__CAN2_RX,
+ MX25_PAD_GPIO_C__CAN2_TX,
+};
+
+#define GPIO_LED1 83
+#define GPIO_SWITCH1 82
+#define GPIO_SD1CD 52
+#define GPIO_LCDPWR 26
+
+static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
+ {
+ .mode = {
+ .name = "CMO-QVGA",
+ .refresh = 60,
+ .xres = 320,
+ .yres = 240,
+ .pixclock = KHZ2PICOS(6500),
+ .left_margin = 30,
+ .right_margin = 38,
+ .upper_margin = 20,
+ .lower_margin = 3,
+ .hsync_len = 15,
+ .vsync_len = 4,
+ },
+ .bpp = 16,
+ .pcr = 0xCAD08B80,
+ }, {
+ .mode = {
+ .name = "DVI-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 32000,
+ .hsync_len = 7,
+ .left_margin = 100,
+ .right_margin = 100,
+ .vsync_len = 7,
+ .upper_margin = 7,
+ .lower_margin = 100,
+ },
+ .pcr = 0xFA208B80,
+ .bpp = 16,
+ }, {
+ .mode = {
+ .name = "DVI-SVGA",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 25000,
+ .hsync_len = 7,
+ .left_margin = 75,
+ .right_margin = 75,
+ .vsync_len = 7,
+ .upper_margin = 7,
+ .lower_margin = 75,
+ },
+ .pcr = 0xFA208B80,
+ .bpp = 16,
+ },
+};
+
+static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
+ .mode = eukrea_mximxsd_modes,
+ .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00040060,
+};
+
+static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power)
+ gpio_direction_output(GPIO_LCDPWR, 1);
+ else
+ gpio_direction_output(GPIO_LCDPWR, 0);
+}
+
+static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
+ .set_power = eukrea_mbimxsd_lcd_power_set,
+};
+
+static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
+};
+
+static struct gpio_led eukrea_mbimxsd_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .active_low = 1,
+ .gpio = GPIO_LED1,
+ },
+};
+
+static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+ .leds = eukrea_mbimxsd_leds,
+ .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
+};
+
+static struct platform_device eukrea_mbimxsd_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &eukrea_mbimxsd_led_info,
+ },
+};
+
+static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
+ {
+ .gpio = GPIO_SWITCH1,
+ .code = BTN_0,
+ .desc = "BP1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
+ .buttons = eukrea_mbimxsd_gpio_buttons,
+ .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
+};
+
+static struct platform_device eukrea_mbimxsd_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &eukrea_mbimxsd_button_data,
+ }
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &eukrea_mbimxsd_leds_gpio,
+ &eukrea_mbimxsd_button_device,
+ &eukrea_mbimxsd_lcd_powerdev,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ },
+};
+
+static const
+struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
+ .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx25 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimxsd25_baseboard_init(void)
+{
+ if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
+ ARRAY_SIZE(eukrea_mbimxsd_pads)))
+ printk(KERN_ERR "error setting mbimxsd pads !\n");
+
+#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
+ /* SSI unit master I2S codec connected to SSI_AUD5*/
+ mxc_audmux_v2_configure_port(0,
+ MXC_AUDMUX_V2_PTCR_SYN |
+ MXC_AUDMUX_V2_PTCR_TFSDIR |
+ MXC_AUDMUX_V2_PTCR_TFSEL(4) |
+ MXC_AUDMUX_V2_PTCR_TCLKDIR |
+ MXC_AUDMUX_V2_PTCR_TCSEL(4),
+ MXC_AUDMUX_V2_PDCR_RXDSEL(4)
+ );
+ mxc_audmux_v2_configure_port(4,
+ MXC_AUDMUX_V2_PTCR_SYN,
+ MXC_AUDMUX_V2_PDCR_RXDSEL(0)
+ );
+#endif
+
+ imx25_add_imx_uart1(&uart_pdata);
+ imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
+ imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
+
+ imx25_add_flexcan1(NULL);
+ imx25_add_esdhc(0, NULL);
+
+ gpio_request(GPIO_LED1, "LED1");
+ gpio_direction_output(GPIO_LED1, 1);
+ gpio_free(GPIO_LED1);
+
+ gpio_request(GPIO_SWITCH1, "SWITCH1");
+ gpio_direction_input(GPIO_SWITCH1);
+ gpio_free(GPIO_SWITCH1);
+
+ gpio_request(GPIO_LCDPWR, "LCDPWR");
+ gpio_direction_output(GPIO_LCDPWR, 1);
+ gpio_free(GPIO_SWITCH1);
+
+ i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
+ ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
--- /dev/null
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#include <mach/eukrea-baseboards.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc eukrea_cpuimx25_pads[] = {
+ /* FEC - RMII */
+ MX25_PAD_FEC_MDC__FEC_MDC,
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ /* I2C1 */
+ MX25_PAD_I2C1_CLK__I2C1_CLK,
+ MX25_PAD_I2C1_DAT__I2C1_DAT,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static const struct mxc_nand_platform_data
+eukrea_cpuimx25_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+static const struct imxi2c_platform_data
+eukrea_cpuimx25_i2c0_data __initconst = {
+ .bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
+ .portsc = MXC_EHCI_MODE_UTMI,
+ .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+ .portsc = MXC_EHCI_MODE_SERIAL,
+ .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+ MXC_EHCI_IPPUE_DOWN,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx25_otg_mode(char *options)
+{
+ if (!strcmp(options, "host"))
+ otg_mode_host = 1;
+ else if (!strcmp(options, "device"))
+ otg_mode_host = 0;
+ else
+ pr_info("otg_mode neither \"host\" nor \"device\". "
+ "Defaulting to device\n");
+ return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
+
+static void __init eukrea_cpuimx25_init(void)
+{
+ if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
+ ARRAY_SIZE(eukrea_cpuimx25_pads)))
+ printk(KERN_ERR "error setting cpuimx25 pads !\n");
+
+ imx25_add_imx_uart0(&uart_pdata);
+ imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
+ imx25_add_imxdi_rtc(NULL);
+ imx25_add_fec(&mx25_fec_pdata);
+
+ i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
+ ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
+ imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
+
+ if (otg_mode_host)
+ imx25_add_mxc_ehci_otg(&otg_pdata);
+ else
+ imx25_add_fsl_usb2_udc(&otg_device_pdata);
+
+ imx25_add_mxc_ehci_hs(&usbh2_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+ eukrea_mbimxsd25_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx25_timer_init(void)
+{
+ mx25_clocks_init();
+}
+
+static struct sys_timer eukrea_cpuimx25_timer = {
+ .init = eukrea_cpuimx25_timer_init,
+};
+
+MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+ /* Maintainer: Eukrea Electromatique */
+ .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .map_io = mx25_map_io,
+ .init_irq = mx25_init_irq,
+ .init_machine = eukrea_cpuimx25_init,
+ .timer = &eukrea_cpuimx25_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
+/*
+ * This machine is known as:
+ * - i.MX25 3-Stack Development System
+ * - i.MX25 Platform Development Kit (i.MX25 PDK)
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include <mach/iomux-mx25.h>
+
+#include "devices-imx25.h"
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct pad_desc mx25pdk_pads[] = {
+ MX25_PAD_FEC_MDC__FEC_MDC,
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+ MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+ /* LCD */
+ MX25_PAD_LD0__LD0,
+ MX25_PAD_LD1__LD1,
+ MX25_PAD_LD2__LD2,
+ MX25_PAD_LD3__LD3,
+ MX25_PAD_LD4__LD4,
+ MX25_PAD_LD5__LD5,
+ MX25_PAD_LD6__LD6,
+ MX25_PAD_LD7__LD7,
+ MX25_PAD_LD8__LD8,
+ MX25_PAD_LD9__LD9,
+ MX25_PAD_LD10__LD10,
+ MX25_PAD_LD11__LD11,
+ MX25_PAD_LD12__LD12,
+ MX25_PAD_LD13__LD13,
+ MX25_PAD_LD14__LD14,
+ MX25_PAD_LD15__LD15,
+ MX25_PAD_GPIO_E__LD16,
+ MX25_PAD_GPIO_F__LD17,
+ MX25_PAD_HSYNC__HSYNC,
+ MX25_PAD_VSYNC__VSYNC,
+ MX25_PAD_LSCLK__LSCLK,
+ MX25_PAD_OE_ACD__OE_ACD,
+ MX25_PAD_CONTRAST__CONTRAST,
+
+ /* Keypad */
+ MX25_PAD_KPP_ROW0__KPP_ROW0,
+ MX25_PAD_KPP_ROW1__KPP_ROW1,
+ MX25_PAD_KPP_ROW2__KPP_ROW2,
+ MX25_PAD_KPP_ROW3__KPP_ROW3,
+ MX25_PAD_KPP_COL0__KPP_COL0,
+ MX25_PAD_KPP_COL1__KPP_COL1,
+ MX25_PAD_KPP_COL2__KPP_COL2,
+ MX25_PAD_KPP_COL3__KPP_COL3,
+
+ /* SD1 */
+ MX25_PAD_SD1_CMD__SD1_CMD,
+ MX25_PAD_SD1_CLK__SD1_CLK,
+ MX25_PAD_SD1_DATA0__SD1_DATA0,
+ MX25_PAD_SD1_DATA1__SD1_DATA1,
+ MX25_PAD_SD1_DATA2__SD1_DATA2,
+ MX25_PAD_SD1_DATA3__SD1_DATA3,
+};
+
+static const struct fec_platform_data mx25_fec_pdata __initconst = {
+ .phy = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO 35
+#define FEC_RESET_B_GPIO 104
+
+static void __init mx25pdk_fec_reset(void)
+{
+ gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+ gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+ gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
+ gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+ udelay(2);
+
+ /* turn on PHY power and lift reset */
+ gpio_set_value(FEC_ENABLE_GPIO, 1);
+ gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
+static const struct mxc_nand_platform_data
+mx25pdk_nand_board_info __initconst = {
+ .width = 1,
+ .hw_ecc = 1,
+ .flash_bbt = 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+ {
+ .mode = {
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39683,
+ .left_margin = 45,
+ .right_margin = 114,
+ .upper_margin = 33,
+ .lower_margin = 11,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ },
+ .bpp = 16,
+ .pcr = 0xFA208B80,
+ },
+};
+
+static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
+ .mode = mx25pdk_modes,
+ .num_modes = ARRAY_SIZE(mx25pdk_modes),
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+};
+
+static const uint32_t mx25pdk_keymap[] = {
+ KEY(0, 0, KEY_UP),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_VOLUMEDOWN),
+ KEY(0, 3, KEY_HOME),
+ KEY(1, 0, KEY_RIGHT),
+ KEY(1, 1, KEY_LEFT),
+ KEY(1, 2, KEY_ENTER),
+ KEY(1, 3, KEY_VOLUMEUP),
+ KEY(2, 0, KEY_F6),
+ KEY(2, 1, KEY_F8),
+ KEY(2, 2, KEY_F9),
+ KEY(2, 3, KEY_F10),
+ KEY(3, 0, KEY_F1),
+ KEY(3, 1, KEY_F2),
+ KEY(3, 2, KEY_F3),
+ KEY(3, 3, KEY_POWER),
+};
+
+static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
+ .keymap = mx25pdk_keymap,
+ .keymap_size = ARRAY_SIZE(mx25pdk_keymap),
+};
+
+static void __init mx25pdk_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+ ARRAY_SIZE(mx25pdk_pads));
+
+ imx25_add_imx_uart0(&uart_pdata);
+ imx25_add_mxc_ehci_hs(NULL);
+ imx25_add_mxc_nand(&mx25pdk_nand_board_info);
+ imx25_add_imxdi_rtc(NULL);
+ imx25_add_imx_fb(&mx25pdk_fb_pdata);
+ imx25_add_imx2_wdt(NULL);
+
+ mx25pdk_fec_reset();
+ imx25_add_fec(&mx25_fec_pdata);
+ imx25_add_imx_keypad(&mx25pdk_keymap_data);
+
+ imx25_add_esdhc(0, NULL);
+}
+
+static void __init mx25pdk_timer_init(void)
+{
+ mx25_clocks_init();
+}
+
+static struct sys_timer mx25pdk_timer = {
+ .init = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+ /* Maintainer: Freescale Semiconductor, Inc. */
+ .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .map_io = mx25_map_io,
+ .init_irq = mx25_init_irq,
+ .init_machine = mx25pdk_init,
+ .timer = &mx25pdk_timer,
+MACHINE_END
+
--- /dev/null
+/*
+ * Copyright (C) 1999,2000 Arm Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX25 boards.
+ */
+static struct map_desc mx25_io_desc[] __initdata = {
+ imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
+ imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX25);
+ mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+ mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+ iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
+}
+
+int imx25_register_gpios(void);
+
+void __init mx25_init_irq(void)
+{
+ mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
+ imx25_register_gpios();
+}
+
+++ /dev/null
-if ARCH_MX25
-
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
- bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_ESDHC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
-
-config MACH_EUKREA_CPUIMX25
- bool "Support Eukrea CPUIMX25 Platform"
- select IMX_HAVE_PLATFORM_ESDHC
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select MXC_ULPI if USB_ULPI
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25
- default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_IMX_SSI
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-endif
+++ /dev/null
-obj-y := mm.o
-obj-$(CONFIG_ARCH_MX25) += clock.o
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+++ /dev/null
- zreladdr-y := 0x80008000
-params_phys-y := 0x80000100
-initrd_phys-y := 0x80800000
+++ /dev/null
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
-#define CCM_MPCTL 0x00
-#define CCM_UPCTL 0x04
-#define CCM_CCTL 0x08
-#define CCM_CGCR0 0x0C
-#define CCM_CGCR1 0x10
-#define CCM_CGCR2 0x14
-#define CCM_PCDR0 0x18
-#define CCM_PCDR1 0x1C
-#define CCM_PCDR2 0x20
-#define CCM_PCDR3 0x24
-#define CCM_RCSR 0x28
-#define CCM_CRDR 0x2C
-#define CCM_DCVR0 0x30
-#define CCM_DCVR1 0x34
-#define CCM_DCVR2 0x38
-#define CCM_DCVR3 0x3c
-#define CCM_LTR0 0x40
-#define CCM_LTR1 0x44
-#define CCM_LTR2 0x48
-#define CCM_LTR3 0x4c
-
-static unsigned long get_rate_mpll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_upll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-unsigned long get_rate_arm(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_mpll();
-
- if (cctl & (1 << 14))
- rate = (rate * 3) >> 2;
-
- return rate / ((cctl >> 30) + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-
- return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_per(int per)
-{
- unsigned long ofs = (per & 0x3) * 8;
- unsigned long reg = per & ~0x3;
- unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
- unsigned long fref;
-
- if (readl(CRM_BASE + 0x64) & (1 << per))
- fref = get_rate_upll();
- else
- fref = get_rate_ahb(NULL);
-
- return fref / (val + 1);
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
- return get_rate_per(15);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
- return get_rate_per(14);
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
- return get_rate_per(13);
-}
-
-static unsigned long get_rate_i2c(struct clk *clk)
-{
- return get_rate_per(6);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- return get_rate_per(8);
-}
-
-static unsigned long get_rate_gpt(struct clk *clk)
-{
- return get_rate_per(5);
-}
-
-static unsigned long get_rate_lcdc(struct clk *clk)
-{
- return get_rate_per(7);
-}
-
-static unsigned long get_rate_esdhc1(struct clk *clk)
-{
- return get_rate_per(3);
-}
-
-static unsigned long get_rate_esdhc2(struct clk *clk)
-{
- return get_rate_per(4);
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
- return get_rate_per(0);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_upll();
-
- return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
-}
-
-static int clk_cgcr_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_cgcr_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = CRM_BASE + er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = clk_cgcr_enable, \
- .disable = clk_cgcr_disable, \
- .secondary = s, \
- }
-
-/*
- * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
- * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
- * taken from the Freescale released BSP.
- *
- * bit reg offset clock
- *
- * 0 CGCR1 0 AUDMUX
- * 12 CGCR1 12 ESAI
- * 16 CGCR1 16 GPIO1
- * 17 CGCR1 17 GPIO2
- * 18 CGCR1 18 GPIO3
- * 23 CGCR1 23 I2C1
- * 24 CGCR1 24 I2C2
- * 25 CGCR1 25 I2C3
- * 27 CGCR1 27 IOMUXC
- * 28 CGCR1 28 KPP
- * 30 CGCR1 30 OWIRE
- * 36 CGCR2 4 RTIC
- * 51 CGCR2 19 WDOG
- */
-
-DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
-DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
-DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL);
-DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL,
- &esdhc1_ahb_clk);
-DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL);
-DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL,
- &esdhc2_ahb_clk);
-DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
-DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
-DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
-DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
-DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
-DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
-DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
-DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
-DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
-DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
- &esdhc1_per_clk);
-DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
- &esdhc2_per_clk);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
-DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
-DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
- _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
- _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
- _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
- _REGISTER_CLOCK("fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
-};
-
-int __init mx25_clocks_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks except the ones we need to survive, namely:
- * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
- * SCC
- */
- __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
- __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
- __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart1_clk);
-#endif
-
- /* Clock source for lcdc and csi is upll */
- __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
- CRM_BASE + 0x64);
-
- mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx25.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx25_fec_data __initconst;
-#define imx25_add_fec(pdata) \
- imx_add_fec(&imx25_fec_data, pdata)
-
-extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
-#define imx25_add_flexcan(id, pdata) \
- imx_add_flexcan(&imx25_flexcan_data[id], pdata)
-#define imx25_add_flexcan0(pdata) imx25_add_flexcan(0, pdata)
-#define imx25_add_flexcan1(pdata) imx25_add_flexcan(1, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
-#define imx25_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
-#define imx25_add_imxdi_rtc(pdata) \
- imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
-#define imx25_add_imx2_wdt(pdata) \
- imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
-#define imx25_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
-#define imx25_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
-#define imx25_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
-#define imx25_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
-#define imx25_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
-#define imx25_add_mx2_camera(pdata) \
- imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
-#define imx25_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
-#define imx25_add_mxc_ehci_hs(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
-#define imx25_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
-#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
-#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
-
-extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
-#define imx25_add_esdhc(id, pdata) \
- imx_add_esdhc(&imx25_esdhc_data[id], pdata)
+++ /dev/null
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <video/platform_lcd.h>
-
-#include <mach/hardware.h>
-#include <mach/iomux-mx25.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/mx25.h>
-#include <mach/imx-uart.h>
-#include <mach/audmux.h>
-
-#include "devices-imx25.h"
-
-static struct pad_desc eukrea_mbimxsd_pads[] = {
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
- /* LCD_PWR */
- MX25_PAD_PWM__GPIO_1_26,
- /* LED */
- MX25_PAD_POWER_FAIL__GPIO_3_19,
- /* SWITCH */
- MX25_PAD_VSTBY_ACK__GPIO_3_18,
- /* UART2 */
- MX25_PAD_UART2_RTS__UART2_RTS,
- MX25_PAD_UART2_CTS__UART2_CTS,
- MX25_PAD_UART2_TXD__UART2_TXD,
- MX25_PAD_UART2_RXD__UART2_RXD,
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- MX25_PAD_DE_B__GPIO_2_20,
- /* I2S */
- MX25_PAD_KPP_COL3__AUD5_TXFS,
- MX25_PAD_KPP_COL2__AUD5_TXC,
- MX25_PAD_KPP_COL1__AUD5_RXD,
- MX25_PAD_KPP_COL0__AUD5_TXD,
- /* CAN */
- MX25_PAD_GPIO_D__CAN2_RX,
- MX25_PAD_GPIO_C__CAN2_TX,
-};
-
-#define GPIO_LED1 83
-#define GPIO_SWITCH1 82
-#define GPIO_SD1CD 52
-#define GPIO_LCDPWR 26
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
- {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .left_margin = 30,
- .right_margin = 38,
- .upper_margin = 20,
- .lower_margin = 3,
- .hsync_len = 15,
- .vsync_len = 4,
- },
- .bpp = 16,
- .pcr = 0xCAD08B80,
- }, {
- .mode = {
- .name = "DVI-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 32000,
- .hsync_len = 7,
- .left_margin = 100,
- .right_margin = 100,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 100,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- }, {
- .mode = {
- .name = "DVI-SVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 600,
- .pixclock = 25000,
- .hsync_len = 7,
- .left_margin = 75,
- .right_margin = 75,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 75,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
- .mode = eukrea_mximxsd_modes,
- .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDPWR, 1);
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
- .set_power = eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
-};
-
-static struct gpio_led eukrea_mbimxsd_leds[] = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
- .leds = eukrea_mbimxsd_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &eukrea_mbimxsd_led_info,
- },
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
- .buttons = eukrea_mbimxsd_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device eukrea_mbimxsd_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &eukrea_mbimxsd_button_data,
- }
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_leds_gpio,
- &eukrea_mbimxsd_button_device,
- &eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
- /* SSI unit master I2S codec connected to SSI_AUD5*/
- mxc_audmux_v2_configure_port(0,
- MXC_AUDMUX_V2_PTCR_SYN |
- MXC_AUDMUX_V2_PTCR_TFSDIR |
- MXC_AUDMUX_V2_PTCR_TFSEL(4) |
- MXC_AUDMUX_V2_PTCR_TCLKDIR |
- MXC_AUDMUX_V2_PTCR_TCSEL(4),
- MXC_AUDMUX_V2_PDCR_RXDSEL(4)
- );
- mxc_audmux_v2_configure_port(4,
- MXC_AUDMUX_V2_PTCR_SYN,
- MXC_AUDMUX_V2_PDCR_RXDSEL(0)
- );
-#endif
-
- imx25_add_imx_uart1(&uart_pdata);
- imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
- imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
- imx25_add_flexcan1(NULL);
- imx25_add_esdhc(0, NULL);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDPWR, "LCDPWR");
- gpio_direction_output(GPIO_LCDPWR, 1);
- gpio_free(GPIO_SWITCH1);
-
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
+++ /dev/null
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include <mach/iomux-mx25.h>
-
-#include "devices-imx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct pad_desc eukrea_cpuimx25_pads[] = {
- /* FEC - RMII */
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- /* I2C1 */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
- .portsc = MXC_EHCI_MODE_UTMI,
- .flags = MXC_EHCI_INTERFACE_DIFF_UNI,
-};
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .portsc = MXC_EHCI_MODE_SERIAL,
- .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
- MXC_EHCI_IPPUE_DOWN,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = 1;
- else if (!strcmp(options, "device"))
- otg_mode_host = 0;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
- ARRAY_SIZE(eukrea_cpuimx25_pads)))
- printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
- imx25_add_fec(&mx25_fec_pdata);
-
- i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
- imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
- if (otg_mode_host)
- imx25_add_mxc_ehci_otg(&otg_pdata);
- else
- imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
- eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-static struct sys_timer eukrea_cpuimx25_timer = {
- .init = eukrea_cpuimx25_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
- /* Maintainer: Eukrea Electromatique */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
- .map_io = mx25_map_io,
- .init_irq = mx25_init_irq,
- .init_machine = eukrea_cpuimx25_init,
- .timer = &eukrea_cpuimx25_timer,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- * - i.MX25 3-Stack Development System
- * - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/input/matrix_keypad.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-#include <mach/iomux-mx25.h>
-
-#include "devices-imx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct pad_desc mx25pdk_pads[] = {
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
- MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
-
- /* Keypad */
- MX25_PAD_KPP_ROW0__KPP_ROW0,
- MX25_PAD_KPP_ROW1__KPP_ROW1,
- MX25_PAD_KPP_ROW2__KPP_ROW2,
- MX25_PAD_KPP_ROW3__KPP_ROW3,
- MX25_PAD_KPP_COL0__KPP_COL0,
- MX25_PAD_KPP_COL1__KPP_COL1,
- MX25_PAD_KPP_COL2__KPP_COL2,
- MX25_PAD_KPP_COL3__KPP_COL3,
-
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO 35
-#define FEC_RESET_B_GPIO 104
-
-static void __init mx25pdk_fec_reset(void)
-{
- gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
- gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
- gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
- gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
- udelay(2);
-
- /* turn on PHY power and lift reset */
- gpio_set_value(FEC_ENABLE_GPIO, 1);
- gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
- {
- .mode = {
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39683,
- .left_margin = 45,
- .right_margin = 114,
- .upper_margin = 33,
- .lower_margin = 11,
- .hsync_len = 1,
- .vsync_len = 1,
- },
- .bpp = 16,
- .pcr = 0xFA208B80,
- },
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
- .mode = mx25pdk_modes,
- .num_modes = ARRAY_SIZE(mx25pdk_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(0, 2, KEY_VOLUMEDOWN),
- KEY(0, 3, KEY_HOME),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(1, 3, KEY_VOLUMEUP),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
- KEY(3, 0, KEY_F1),
- KEY(3, 1, KEY_F2),
- KEY(3, 2, KEY_F3),
- KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
- .keymap = mx25pdk_keymap,
- .keymap_size = ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static void __init mx25pdk_init(void)
-{
- mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
- ARRAY_SIZE(mx25pdk_pads));
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_mxc_ehci_hs(NULL);
- imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- imx25_add_imxdi_rtc(NULL);
- imx25_add_imx_fb(&mx25pdk_fb_pdata);
- imx25_add_imx2_wdt(NULL);
-
- mx25pdk_fec_reset();
- imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
- imx25_add_esdhc(0, NULL);
-}
-
-static void __init mx25pdk_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-static struct sys_timer mx25pdk_timer = {
- .init = mx25pdk_timer_init,
-};
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
- .map_io = mx25_map_io,
- .init_irq = mx25_init_irq,
- .init_machine = mx25pdk_init,
- .timer = &mx25pdk_timer,
-MACHINE_END
-
+++ /dev/null
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/mx25.h>
-#include <mach/iomux-v3.h>
-
-/*
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX25 boards.
- */
-static struct map_desc mx25_io_desc[] __initdata = {
- imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx25_map_io(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX25);
- mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
- mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
-
- iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
-}
-
-int imx25_register_gpios(void);
-
-void __init mx25_init_irq(void)
-{
- mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
- imx25_register_gpios();
-}
-
config ARCH_MX25
bool "MX25-based"
- select CPU_ARM926T
- select ARCH_MXC_IOMUX_V3
- select HAVE_FB_IMX
- select ARCH_MXC_AUDMUX_V2
help
This enables support for systems based on the Freescale i.MX25 family
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
projects / firefly-linux-kernel-4.4.55.git / commitdiff