ARM: dts: qcom: Add SATA support on IPQ8064/AP148

Add SATA PHY and SATA AHCI controller nodes to device tree to enable
generic ahci support on the IPQ8064/AP148 board.

Signed-off-by: Kumar Gala <galak@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 95e64955fb8e2aed02a886e218e3a58bf326c899..55b2910efd872170ca19a99d867be4a34dd60794 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -81,5 +81,13 @@
                                };
                        };
                };
+
+               sata-phy@1b400000 {
+                       status = "ok";
+               };
+
+               sata@29000000 {
+                       status = "ok";
+               };
        };
 };

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 244f857f0e6f63a8408b22b499c017d0abf7ac05..63b2146f563b541e4994697af5ee1bbb41a4abd1 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -234,6 +234,39 @@
                        };
                };
 
+               sata_phy: sata-phy@1b400000 {
+                       compatible = "qcom,ipq806x-sata-phy";
+                       reg = <0x1b400000 0x200>;
+
+                       clocks = <&gcc SATA_PHY_CFG_CLK>;
+                       clock-names = "cfg";
+
+                       #phy-cells = <0>;
+                       status = "disabled";
+               };
+
+               sata@29000000 {
+                       compatible = "qcom,ipq806x-ahci", "generic-ahci";
+                       reg = <0x29000000 0x180>;
+
+                       interrupts = <0 209 0x0>;
+
+                       clocks = <&gcc SFAB_SATA_S_H_CLK>,
+                                <&gcc SATA_H_CLK>,
+                                <&gcc SATA_A_CLK>,
+                                <&gcc SATA_RXOOB_CLK>,
+                                <&gcc SATA_PMALIVE_CLK>;
+                       clock-names = "slave_face", "iface", "core",
+                                       "rxoob", "pmalive";
+
+                       assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+                       assigned-clock-rates = <100000000>, <100000000>;
+
+                       phys = <&sata_phy>;
+                       phy-names = "sata-phy";
+                       status = "disabled";
+               };
+
                qcom,ssbi@500000 {
                        compatible = "qcom,ssbi";
                        reg = <0x00500000 0x1000>;