Staging: slicoss: remove SLIC_ETHTOOL_SUPPORT
authorGreg Kroah-Hartman <gregkh@suse.de>
Thu, 26 Feb 2009 22:52:19 +0000 (14:52 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 3 Apr 2009 21:53:07 +0000 (14:53 -0700)
It was always enabled, so just always use it.

Cleaned up the ioctl code a bit as well to make it more readable.

Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/slicoss/slicoss.c

index bb91d49a65611798a0bf15f6277138348cd32b96..ddd8e9c892f559a0491ca2cc1bdef2d0553cd172 100644 (file)
@@ -94,8 +94,6 @@
 #include <asm/unaligned.h>
 
 #include <linux/ethtool.h>
-#define SLIC_ETHTOOL_SUPPORT     1
-
 #include <linux/uaccess.h>
 #include "slicdbg.h"
 #include "slichw.h"
@@ -609,35 +607,27 @@ static int slic_entry_halt(struct net_device *dev)
 
 static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
+       struct adapter *adapter = (struct adapter *)netdev_priv(dev);
+       struct ethtool_cmd edata;
+       struct ethtool_cmd ecmd;
+       u32 data[7];
+       u32 intagg;
+
        ASSERT(rq);
        switch (cmd) {
        case SIOCSLICSETINTAGG:
-               {
-                       struct adapter *adapter = (struct adapter *)
-                                                       netdev_priv(dev);
-                       u32 data[7];
-                       u32 intagg;
-
-                       if (copy_from_user(data, rq->ifr_data, 28)) {
-                               DBG_ERROR
-                                   ("copy_from_user FAILED getting initial \
-                                    params\n");
-                               return -EFAULT;
-                       }
-                       intagg = data[0];
-                       printk(KERN_EMERG
-                              "%s: set interrupt aggregation to %d\n",
-                              __func__, intagg);
-                       slic_intagg_set(adapter, intagg);
-                       return 0;
-               }
+               if (copy_from_user(data, rq->ifr_data, 28))
+                       return -EFAULT;
+               intagg = data[0];
+               printk(KERN_EMERG "%s: set interrupt aggregation to %d\n",
+                      __func__, intagg);
+               slic_intagg_set(adapter, intagg);
+               return 0;
 
 #ifdef SLIC_TRACE_DUMP_ENABLED
        case SIOCSLICTRACEDUMP:
                {
-                       ulong data[7];
-                       ulong value;
-
+                       u32 value;
                        DBG_IOCTL("slic_ioctl  SIOCSLIC_TRACE_DUMP\n");
 
                        if (copy_from_user(data, rq->ifr_data, 28)) {
@@ -670,101 +660,75 @@ static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
                        return 0;
                }
 #endif
-#if SLIC_ETHTOOL_SUPPORT
        case SIOCETHTOOL:
-               {
-                       struct adapter *adapter = (struct adapter *)
-                                                       netdev_priv(dev);
-                       struct ethtool_cmd data;
-                       struct ethtool_cmd ecmd;
+               ASSERT(adapter);
+               if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
+                       return -EFAULT;
+
+               if (ecmd.cmd == ETHTOOL_GSET) {
+                       edata.supported = (SUPPORTED_10baseT_Half |
+                                          SUPPORTED_10baseT_Full |
+                                          SUPPORTED_100baseT_Half |
+                                          SUPPORTED_100baseT_Full |
+                                          SUPPORTED_Autoneg | SUPPORTED_MII);
+                       edata.port = PORT_MII;
+                       edata.transceiver = XCVR_INTERNAL;
+                       edata.phy_address = 0;
+                       if (adapter->linkspeed == LINK_100MB)
+                               edata.speed = SPEED_100;
+                       else if (adapter->linkspeed == LINK_10MB)
+                               edata.speed = SPEED_10;
+                       else
+                               edata.speed = 0;
+
+                       if (adapter->linkduplex == LINK_FULLD)
+                               edata.duplex = DUPLEX_FULL;
+                       else
+                               edata.duplex = DUPLEX_HALF;
 
-                       ASSERT(adapter);
-                       if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
+                       edata.autoneg = AUTONEG_ENABLE;
+                       edata.maxtxpkt = 1;
+                       edata.maxrxpkt = 1;
+                       if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
                                return -EFAULT;
 
-                       if (ecmd.cmd == ETHTOOL_GSET) {
-                               data.supported =
-                                   (SUPPORTED_10baseT_Half |
-                                    SUPPORTED_10baseT_Full |
-                                    SUPPORTED_100baseT_Half |
-                                    SUPPORTED_100baseT_Full |
-                                    SUPPORTED_Autoneg | SUPPORTED_MII);
-                               data.port = PORT_MII;
-                               data.transceiver = XCVR_INTERNAL;
-                               data.phy_address = 0;
-                               if (adapter->linkspeed == LINK_100MB)
-                                       data.speed = SPEED_100;
-                               else if (adapter->linkspeed == LINK_10MB)
-                                       data.speed = SPEED_10;
-                               else
-                                       data.speed = 0;
+               } else if (ecmd.cmd == ETHTOOL_SSET) {
+                       if (!capable(CAP_NET_ADMIN))
+                               return -EPERM;
 
-                               if (adapter->linkduplex == LINK_FULLD)
-                                       data.duplex = DUPLEX_FULL;
-                               else
-                                       data.duplex = DUPLEX_HALF;
-
-                               data.autoneg = AUTONEG_ENABLE;
-                               data.maxtxpkt = 1;
-                               data.maxrxpkt = 1;
-                               if (copy_to_user
-                                   (rq->ifr_data, &data, sizeof(data)))
-                                       return -EFAULT;
-
-                       } else if (ecmd.cmd == ETHTOOL_SSET) {
-                               if (!capable(CAP_NET_ADMIN))
-                                       return -EPERM;
-
-                               if (adapter->linkspeed == LINK_100MB)
-                                       data.speed = SPEED_100;
-                               else if (adapter->linkspeed == LINK_10MB)
-                                       data.speed = SPEED_10;
-                               else
-                                       data.speed = 0;
+                       if (adapter->linkspeed == LINK_100MB)
+                               edata.speed = SPEED_100;
+                       else if (adapter->linkspeed == LINK_10MB)
+                               edata.speed = SPEED_10;
+                       else
+                               edata.speed = 0;
 
-                               if (adapter->linkduplex == LINK_FULLD)
-                                       data.duplex = DUPLEX_FULL;
+                       if (adapter->linkduplex == LINK_FULLD)
+                               edata.duplex = DUPLEX_FULL;
+                       else
+                               edata.duplex = DUPLEX_HALF;
+
+                       edata.autoneg = AUTONEG_ENABLE;
+                       edata.maxtxpkt = 1;
+                       edata.maxrxpkt = 1;
+                       if ((ecmd.speed != edata.speed) ||
+                           (ecmd.duplex != edata.duplex)) {
+                               u32 speed;
+                               u32 duplex;
+
+                               if (ecmd.speed == SPEED_10)
+                                       speed = 0;
                                else
-                                       data.duplex = DUPLEX_HALF;
-
-                               data.autoneg = AUTONEG_ENABLE;
-                               data.maxtxpkt = 1;
-                               data.maxrxpkt = 1;
-                               if ((ecmd.speed != data.speed) ||
-                                   (ecmd.duplex != data.duplex)) {
-                                       u32 speed;
-                                       u32 duplex;
-
-                                       if (ecmd.speed == SPEED_10) {
-                                               speed = 0;
-                                               SLIC_DISPLAY
-                                                   ("%s: slic ETHTOOL set \
-                                                    link speed==10MB",
-                                                    dev->name);
-                                       } else {
-                                               speed = PCR_SPEED_100;
-                                               SLIC_DISPLAY
-                                                   ("%s: slic ETHTOOL set \
-                                                   link speed==100MB",
-                                                    dev->name);
-                                       }
-                                       if (ecmd.duplex == DUPLEX_FULL) {
-                                               duplex = PCR_DUPLEX_FULL;
-                                               SLIC_DISPLAY
-                                                   (": duplex==FULL\n");
-                                       } else {
-                                               duplex = 0;
-                                               SLIC_DISPLAY
-                                                   (": duplex==HALF\n");
-                                       }
-                                       slic_link_config(adapter,
-                                                        speed, duplex);
-                                       slic_link_event_handler(adapter);
-                               }
+                                       speed = PCR_SPEED_100;
+                               if (ecmd.duplex == DUPLEX_FULL)
+                                       duplex = PCR_DUPLEX_FULL;
+                               else
+                                       duplex = 0;
+                               slic_link_config(adapter, speed, duplex);
+                               slic_link_event_handler(adapter);
                        }
-                       return 0;
                }
-#endif
+               return 0;
        default:
                return -EOPNOTSUPP;
        }