Staging: winbond: wbusb.c Coding style fixes.
authorLars Lindley <lindley@coyote.org>
Fri, 2 Apr 2010 08:57:35 +0000 (10:57 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 11 May 2010 18:35:50 +0000 (11:35 -0700)
I fixed the reported checkpatch.pl problems except for a bunch of
long lines and some printk:s.
I also removed versioning comments.

Signed-off-by: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/winbond/wbusb.c

index 3482eec186516930725bb11a3bb51d2ee83cc782..d7694e6a37a1e8a5ee308c45ea0bf9a64398eedd 100644 (file)
@@ -142,19 +142,17 @@ static void hal_set_radio_mode(struct hw_data *pHwData, unsigned char radio_off)
        if (pHwData->SurpriseRemove)
                return;
 
-       if (radio_off)          //disable Baseband receive off
-       {
-               pHwData->CurrentRadioSw = 1;    // off
+       if (radio_off) {        /* disable Baseband receive off */
+               pHwData->CurrentRadioSw = 1;    /* off */
                reg->M24_MacControl &= 0xffffffbf;
        } else {
-               pHwData->CurrentRadioSw = 0;    // on
+               pHwData->CurrentRadioSw = 0;    /* on */
                reg->M24_MacControl |= 0x00000040;
        }
        Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
 }
 
-static void
-hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
+static void hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
 {
        struct wb35_reg *reg = &pHwData->reg;
 
@@ -163,17 +161,18 @@ hal_set_current_channel_ex(struct hw_data *pHwData, struct chan_info channel)
 
        printk("Going to channel: %d/%d\n", channel.band, channel.ChanNo);
 
-       RFSynthesizer_SwitchingChannel(pHwData, channel);       // Switch channel
+       RFSynthesizer_SwitchingChannel(pHwData, channel); /* Switch channel */
        pHwData->Channel = channel.ChanNo;
        pHwData->band = channel.band;
 #ifdef _PE_STATE_DUMP_
        printk("Set channel is %d, band =%d\n", pHwData->Channel,
               pHwData->band);
 #endif
-       reg->M28_MacControl &= ~0xff;   // Clean channel information field
+       reg->M28_MacControl &= ~0xff;   /* Clean channel information field */
        reg->M28_MacControl |= channel.ChanNo;
        Wb35Reg_WriteWithCallbackValue(pHwData, 0x0828, reg->M28_MacControl,
-                                      (s8 *) & channel, sizeof(struct chan_info));
+                                      (s8 *) &channel,
+                                      sizeof(struct chan_info));
 }
 
 static void hal_set_current_channel(struct hw_data *pHwData, struct chan_info channel)
@@ -188,21 +187,22 @@ static void hal_set_accept_broadcast(struct hw_data *pHwData, u8 enable)
        if (pHwData->SurpriseRemove)
                return;
 
-       reg->M00_MacControl &= ~0x02000000;     //The HW value
+       reg->M00_MacControl &= ~0x02000000;     /* The HW value */
 
        if (enable)
-               reg->M00_MacControl |= 0x02000000;      //The HW value
+               reg->M00_MacControl |= 0x02000000;      /* The HW value */
 
        Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
 }
 
-//for wep key error detection, we need to accept broadcast packets to be received temporary.
+/* For wep key error detection, we need to accept broadcast packets to be received temporary. */
 static void hal_set_accept_promiscuous(struct hw_data *pHwData, u8 enable)
 {
        struct wb35_reg *reg = &pHwData->reg;
 
        if (pHwData->SurpriseRemove)
                return;
+
        if (enable) {
                reg->M00_MacControl |= 0x00400000;
                Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
@@ -219,9 +219,9 @@ static void hal_set_accept_multicast(struct hw_data *pHwData, u8 enable)
        if (pHwData->SurpriseRemove)
                return;
 
-       reg->M00_MacControl &= ~0x01000000;     //The HW value
+       reg->M00_MacControl &= ~0x01000000;     /* The HW value */
        if (enable)
-               reg->M00_MacControl |= 0x01000000;      //The HW value
+               reg->M00_MacControl |= 0x01000000;      /* The HW value */
        Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
 }
 
@@ -232,13 +232,12 @@ static void hal_set_accept_beacon(struct hw_data *pHwData, u8 enable)
        if (pHwData->SurpriseRemove)
                return;
 
-       // 20040108 debug
-       if (!enable)            //Due to SME and MLME are not suitable for 35
+       if (!enable)    /* Due to SME and MLME are not suitable for 35 */
                return;
 
-       reg->M00_MacControl &= ~0x04000000;     //The HW value
+       reg->M00_MacControl &= ~0x04000000;     /* The HW value */
        if (enable)
-               reg->M00_MacControl |= 0x04000000;      //The HW value
+               reg->M00_MacControl |= 0x04000000;      /* The HW value */
 
        Wb35Reg_Write(pHwData, 0x0800, reg->M00_MacControl);
 }
@@ -283,8 +282,7 @@ static const struct ieee80211_ops wbsoft_ops = {
        .get_tsf                = wbsoft_get_tsf,
 };
 
-static void
-hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
+static void hal_set_ethernet_address(struct hw_data *pHwData, u8 *current_address)
 {
        u32 ltmp[2];
 
@@ -294,14 +292,12 @@ hal_set_ethernet_address(struct hw_data *pHwData, u8 * current_address)
        memcpy(pHwData->CurrentMacAddress, current_address, ETH_ALEN);
 
        ltmp[0] = cpu_to_le32(*(u32 *) pHwData->CurrentMacAddress);
-       ltmp[1] =
-           cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
+       ltmp[1] = cpu_to_le32(*(u32 *) (pHwData->CurrentMacAddress + 4)) & 0xffff;
 
        Wb35Reg_BurstWrite(pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT);
 }
 
-static void
-hal_get_permanent_address(struct hw_data *pHwData, u8 * pethernet_address)
+static void hal_get_permanent_address(struct hw_data *pHwData, u8 *pethernet_address)
 {
        if (pHwData->SurpriseRemove)
                return;
@@ -319,7 +315,7 @@ static void hal_stop(struct hw_data *pHwData)
        pHwData->Wb35Tx.tx_halt = 1;
        Wb35Tx_stop(pHwData);
 
-       reg->D00_DmaControl &= ~0xc0000000;     //Tx Off, Rx Off
+       reg->D00_DmaControl &= ~0xc0000000;     /* Tx Off, Rx Off */
        Wb35Reg_Write(pHwData, 0x0400, reg->D00_DmaControl);
 }
 
@@ -346,14 +342,14 @@ u8 hal_get_antenna_number(struct hw_data *pHwData)
 }
 
 /* 0 : radio on; 1: radio off */
-static u8 hal_get_hw_radio_off(struct hw_data * pHwData)
+static u8 hal_get_hw_radio_off(struct hw_data *pHwData)
 {
        struct wb35_reg *reg = &pHwData->reg;
 
        if (pHwData->SurpriseRemove)
                return 1;
 
-       //read the bit16 of register U1B0
+       /* read the bit16 of register U1B0 */
        Wb35Reg_Read(pHwData, 0x3b0, &reg->U1B0);
        if ((reg->U1B0 & 0x00010000)) {
                pHwData->CurrentRadioHw = 1;
@@ -387,104 +383,98 @@ static void hal_led_control(unsigned long data)
 
        if (pHwData->LED_control) {
                ltmp2 = pHwData->LED_control & 0xff;
-               if (ltmp2 == 5) // 5 is WPS mode
-               {
+               if (ltmp2 == 5) { /* 5 is WPS mode */
                        TimeInterval = 100;
                        ltmp2 = (pHwData->LED_control >> 8) & 0xff;
                        switch (ltmp2) {
-                       case 1: // [0.2 On][0.1 Off]...
+                       case 1: /* [0.2 On][0.1 Off]... */
                                pHwData->LED_Blinking %= 3;
-                               ltmp = 0x1010;  // Led 1 & 0 Green and Red
-                               if (pHwData->LED_Blinking == 2) // Turn off
+                               ltmp = 0x1010;  /* Led 1 & 0 Green and Red */
+                               if (pHwData->LED_Blinking == 2) /* Turn off */
                                        ltmp = 0;
                                break;
-                       case 2: // [0.1 On][0.1 Off]...
+                       case 2: /* [0.1 On][0.1 Off]... */
                                pHwData->LED_Blinking %= 2;
-                               ltmp = 0x0010;  // Led 0 red color
-                               if (pHwData->LED_Blinking)      // Turn off
+                               ltmp = 0x0010;  /* Led 0 red color */
+                               if (pHwData->LED_Blinking) /* Turn off */
                                        ltmp = 0;
                                break;
-                       case 3: // [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]...
+                       case 3: /* [0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.1 On][0.1 Off][0.5 Off]... */
                                pHwData->LED_Blinking %= 15;
-                               ltmp = 0x0010;  // Led 0 red color
-                               if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2))        // Turn off 0.6 sec
+                               ltmp = 0x0010;  /* Led 0 red color */
+                               if ((pHwData->LED_Blinking >= 9) || (pHwData->LED_Blinking % 2)) /* Turn off 0.6 sec */
                                        ltmp = 0;
                                break;
-                       case 4: // [300 On][ off ]
-                               ltmp = 0x1000;  // Led 1 Green color
+                       case 4: /* [300 On][ off ] */
+                               ltmp = 0x1000;  /* Led 1 Green color */
                                if (pHwData->LED_Blinking >= 3000)
-                                       ltmp = 0;       // led maybe on after 300sec * 32bit counter overlap.
+                                       ltmp = 0; /* led maybe on after 300sec * 32bit counter overlap. */
                                break;
                        }
                        pHwData->LED_Blinking++;
 
                        reg->U1BC_LEDConfigure = ltmp;
-                       if (LEDSet != 7)        // Only 111 mode has 2 LEDs on PCB.
-                       {
-                               reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8;   // Copy LED result to each LED control register
+                       if (LEDSet != 7) { /* Only 111 mode has 2 LEDs on PCB. */
+                               reg->U1BC_LEDConfigure |= (ltmp & 0xff) << 8; /* Copy LED result to each LED control register */
                                reg->U1BC_LEDConfigure |= (ltmp & 0xff00) >> 8;
                        }
                        Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
                }
-       } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw)  // If radio off
-       {
+       } else if (pHwData->CurrentRadioSw || pHwData->CurrentRadioHw) { /* If radio off */
                if (reg->U1BC_LEDConfigure & 0x1010) {
                        reg->U1BC_LEDConfigure &= ~0x1010;
                        Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure);
                }
        } else {
                switch (LEDSet) {
-               case 4: // [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
-                       if (!pHwData->LED_LinkOn)       // Blink only if not Link On
-                       {
-                               // Blinking if scanning is on progress
+               case 4: /* [100] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
+                       if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
+                               /* Blinking if scanning is on progress */
                                if (pHwData->LED_Scanning) {
                                        if (pHwData->LED_Blinking == 0) {
                                                reg->U1BC_LEDConfigure |= 0x10;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */
                                                pHwData->LED_Blinking = 1;
                                                TimeInterval = 300;
                                        } else {
                                                reg->U1BC_LEDConfigure &= ~0x10;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                                pHwData->LED_Blinking = 0;
                                                TimeInterval = 300;
                                        }
                                } else {
-                                       //Turn Off LED_0
+                                       /* Turn Off LED_0 */
                                        if (reg->U1BC_LEDConfigure & 0x10) {
                                                reg->U1BC_LEDConfigure &= ~0x10;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                        }
                                }
                        } else {
-                               // Turn On LED_0
+                               /* Turn On LED_0 */
                                if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
                                        reg->U1BC_LEDConfigure |= 0x10;
-                                       Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                       Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                }
                        }
                        break;
-
-               case 6: // [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing
-                       if (!pHwData->LED_LinkOn)       // Blink only if not Link On
-                       {
-                               // Blinking if scanning is on progress
+               case 6: /* [110] Only 1 Led be placed on PCB and use pin 21 of IC. Use LED_0 for showing */
+                       if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
+                               /* Blinking if scanning is on progress */
                                if (pHwData->LED_Scanning) {
                                        if (pHwData->LED_Blinking == 0) {
                                                reg->U1BC_LEDConfigure &= ~0xf;
                                                reg->U1BC_LEDConfigure |= 0x10;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 On
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 On */
                                                pHwData->LED_Blinking = 1;
                                                TimeInterval = 300;
                                        } else {
                                                reg->U1BC_LEDConfigure &= ~0x1f;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                                pHwData->LED_Blinking = 0;
                                                TimeInterval = 300;
                                        }
                                } else {
-                                       // 20060901 Gray blinking if in disconnect state and not scanning
+                                       /* Gray blinking if in disconnect state and not scanning */
                                        ltmp = reg->U1BC_LEDConfigure;
                                        reg->U1BC_LEDConfigure &= ~0x1f;
                                        if (LED_GRAY2[(pHwData->LED_Blinking % 30)]) {
@@ -494,85 +484,78 @@ static void hal_led_control(unsigned long data)
                                        }
                                        pHwData->LED_Blinking++;
                                        if (reg->U1BC_LEDConfigure != ltmp)
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                        TimeInterval = 100;
                                }
                        } else {
-                               // Turn On LED_0
+                               /* Turn On LED_0 */
                                if ((reg->U1BC_LEDConfigure & 0x10) == 0) {
                                        reg->U1BC_LEDConfigure |= 0x10;
-                                       Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_0 Off
+                                       Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_0 Off */
                                }
                        }
                        break;
-
-               case 5: // [101] Only 1 Led be placed on PCB and use LED_1 for showing
-                       if (!pHwData->LED_LinkOn)       // Blink only if not Link On
-                       {
-                               // Blinking if scanning is on progress
+               case 5: /* [101] Only 1 Led be placed on PCB and use LED_1 for showing */
+                       if (!pHwData->LED_LinkOn) { /* Blink only if not Link On */
+                               /* Blinking if scanning is on progress */
                                if (pHwData->LED_Scanning) {
                                        if (pHwData->LED_Blinking == 0) {
-                                               reg->U1BC_LEDConfigure |=
-                                                   0x1000;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
+                                               reg->U1BC_LEDConfigure |= 0x1000;
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
                                                pHwData->LED_Blinking = 1;
                                                TimeInterval = 300;
                                        } else {
-                                               reg->U1BC_LEDConfigure &=
-                                                   ~0x1000;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
+                                               reg->U1BC_LEDConfigure &= ~0x1000;
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */
                                                pHwData->LED_Blinking = 0;
                                                TimeInterval = 300;
                                        }
                                } else {
-                                       //Turn Off LED_1
+                                       /* Turn Off LED_1 */
                                        if (reg->U1BC_LEDConfigure & 0x1000) {
-                                               reg->U1BC_LEDConfigure &=
-                                                   ~0x1000;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 Off
+                                               reg->U1BC_LEDConfigure &= ~0x1000;
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 Off */
                                        }
                                }
                        } else {
-                               // Is transmitting/receiving ??
+                               /* Is transmitting/receiving ?? */
                                if ((adapter->RxByteCount !=
                                     pHwData->RxByteCountLast)
                                    || (adapter->TxByteCount !=
                                        pHwData->TxByteCountLast)) {
                                        if ((reg->U1BC_LEDConfigure & 0x3000) !=
                                            0x3000) {
-                                               reg->U1BC_LEDConfigure |=
-                                                   0x3000;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
+                                               reg->U1BC_LEDConfigure |= 0x3000;
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
                                        }
-                                       // Update variable
+                                       /* Update variable */
                                        pHwData->RxByteCountLast =
                                            adapter->RxByteCount;
                                        pHwData->TxByteCountLast =
                                            adapter->TxByteCount;
                                        TimeInterval = 200;
                                } else {
-                                       // Turn On LED_1 and blinking if transmitting/receiving
+                                       /* Turn On LED_1 and blinking if transmitting/receiving */
                                        if ((reg->U1BC_LEDConfigure & 0x3000) !=
                                            0x1000) {
                                                reg->U1BC_LEDConfigure &=
                                                    ~0x3000;
                                                reg->U1BC_LEDConfigure |=
                                                    0x1000;
-                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); // LED_1 On
+                                               Wb35Reg_Write(pHwData, 0x03bc, reg->U1BC_LEDConfigure); /* LED_1 On */
                                        }
                                }
                        }
                        break;
-
-               default:        // Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active
+               default: /* Default setting. 2 LED be placed on PCB. LED_0: Link On LED_1 Active */
                        if ((reg->U1BC_LEDConfigure & 0x3000) != 0x3000) {
-                               reg->U1BC_LEDConfigure |= 0x3000;       // LED_1 is always on and event enable
+                               reg->U1BC_LEDConfigure |= 0x3000;       /* LED_1 is always on and event enable */
                                Wb35Reg_Write(pHwData, 0x03bc,
                                              reg->U1BC_LEDConfigure);
                        }
 
                        if (pHwData->LED_Blinking) {
-                               // Gray blinking
+                               /* Gray blinking */
                                reg->U1BC_LEDConfigure &= ~0x0f;
                                reg->U1BC_LEDConfigure |= 0x10;
                                reg->U1BC_LEDConfigure |=
@@ -584,7 +567,7 @@ static void hal_led_control(unsigned long data)
                                if (pHwData->LED_Blinking < 40)
                                        TimeInterval = 100;
                                else {
-                                       pHwData->LED_Blinking = 0;      // Stop blinking
+                                       pHwData->LED_Blinking = 0; /* Stop blinking */
                                        reg->U1BC_LEDConfigure &= ~0x0f;
                                        Wb35Reg_Write(pHwData, 0x03bc,
                                                      reg->U1BC_LEDConfigure);
@@ -593,16 +576,14 @@ static void hal_led_control(unsigned long data)
                        }
 
                        if (pHwData->LED_LinkOn) {
-                               if (!(reg->U1BC_LEDConfigure & 0x10))   // Check the LED_0
-                               {
-                                       //Try to turn ON LED_0 after gray blinking
+                               if (!(reg->U1BC_LEDConfigure & 0x10)) { /* Check the LED_0 */
+                                       /* Try to turn ON LED_0 after gray blinking */
                                        reg->U1BC_LEDConfigure |= 0x10;
-                                       pHwData->LED_Blinking = 1;      //Start blinking
+                                       pHwData->LED_Blinking = 1; /* Start blinking */
                                        TimeInterval = 50;
                                }
                        } else {
-                               if (reg->U1BC_LEDConfigure & 0x10)      // Check the LED_0
-                               {
+                               if (reg->U1BC_LEDConfigure & 0x10) { /* Check the LED_0 */
                                        reg->U1BC_LEDConfigure &= ~0x10;
                                        Wb35Reg_Write(pHwData, 0x03bc,
                                                      reg->U1BC_LEDConfigure);
@@ -611,7 +592,7 @@ static void hal_led_control(unsigned long data)
                        break;
                }
 
-               //20060828.1 Active send null packet to avoid AP disconnect
+               /* Active send null packet to avoid AP disconnect */
                if (pHwData->LED_LinkOn) {
                        pHwData->NullPacketCount += TimeInterval;
                        if (pHwData->NullPacketCount >=
@@ -622,7 +603,7 @@ static void hal_led_control(unsigned long data)
        }
 
        pHwData->time_count += TimeInterval;
-       Wb35Tx_CurrentTime(adapter, pHwData->time_count);       // 20060928 add
+       Wb35Tx_CurrentTime(adapter, pHwData->time_count);
        pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(TimeInterval);
        add_timer(&pHwData->LEDTimer);
 }
@@ -654,7 +635,7 @@ static int hal_init_hardware(struct ieee80211_hw *hw)
        SoftwareSet = hal_software_set(pHwData);
 
 #ifdef Vendor2
-       // Try to make sure the EEPROM contain
+       /* Try to make sure the EEPROM contain */
        SoftwareSet >>= 8;
        if (SoftwareSet != 0x82)
                return false;