[SCSI] sym53c8xx: Remove ->device_id
authorMatthew Wilcox <matthew@wil.cx>
Fri, 5 Oct 2007 19:55:06 +0000 (15:55 -0400)
committerJames Bottomley <jejb@mulgrave.localdomain>
Tue, 23 Oct 2007 19:11:10 +0000 (15:11 -0400)
Following the same path as ->revision_id, remove ->device_id

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/sym53c8xx_2/sym_fw.c
drivers/scsi/sym53c8xx_2/sym_glue.c
drivers/scsi/sym53c8xx_2/sym_glue.h
drivers/scsi/sym53c8xx_2/sym_hipd.c
drivers/scsi/sym53c8xx_2/sym_hipd.h
drivers/scsi/sym53c8xx_2/sym_nvram.c

index 2be0ae17e06c230975ec27ba79f55881a63a1352..3d4db802c06f941110568757c6635d8c628041c7 100644 (file)
@@ -205,13 +205,13 @@ sym_fw2_patch(struct sym_hcb *np)
         *  Remove a couple of work-arounds specific to C1010 if 
         *  they are not desirable. See `sym_fw2.h' for more details.
         */
-       if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_66 &&
+       if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66 &&
              np->s.device->revision < 0x1 &&
              np->pciclk_khz < 60000)) {
                scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
                scripta0->datao_phase[1] = cpu_to_scr(0);
        }
-       if (!(np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
+       if (!(np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
              np->s.device->revision < 0xff */)) {
                scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
                scripta0->sel_done[1] = cpu_to_scr(0);
index 3ed3ed86d35019e02282f0eec992fcb04b325601..cbe31f2923bcd01103f84121346784da4384d0b2 100644 (file)
@@ -1255,7 +1255,7 @@ static int sym_host_info(struct sym_hcb *np, char *ptr, off_t offset, int len)
 
        copy_info(&info, "Chip " NAME53C "%s, device id 0x%x, "
                         "revision id 0x%x\n", np->s.chip_name,
-                        np->device_id, np->s.device->revision);
+                        np->s.device->device, np->s.device->revision);
        copy_info(&info, "At PCI address %s, IRQ " IRQ_FMT "\n",
                pci_name(np->s.device), IRQ_PRM(np->s.device->irq));
        copy_info(&info, "Min. period factor %d, %s SCSI BUS%s\n",
@@ -1410,7 +1410,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
        np->verbose     = sym_driver_setup.verbose;
        np->s.device    = pdev;
        np->s.unit      = unit;
-       np->device_id   = dev->chip.device_id;
        np->features    = dev->chip.features;
        np->clock_divn  = dev->chip.nr_divisor;
        np->maxoffs     = dev->chip.offset_max;
@@ -1528,7 +1527,6 @@ static struct Scsi_Host * __devinit sym_attach(struct scsi_host_template *tpnt,
 static void __devinit sym_get_nvram(struct sym_device *devp, struct sym_nvram *nvp)
 {
        devp->nvram = nvp;
-       devp->device_id = devp->chip.device_id;
        nvp->type = 0;
 
        sym_read_nvram(devp, nvp);
index d5ba5aae6c5ad63be89ea953544d27e7c7b33c21..b961f704ccb1718fab96901a25cc05f02fa8f077 100644 (file)
@@ -212,7 +212,6 @@ struct sym_device {
        } s;
        struct sym_chip chip;
        struct sym_nvram *nvram;
-       u_short device_id;
        u_char host_id;
 };
 
index 9f4198ce845eac70ed217177552f310ae9120bc0..5443394a60e56cc51e832bffb964ad4b72db44c0 100644 (file)
@@ -804,7 +804,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
         *  In dual channel mode, contention occurs if internal cycles
         *  are used. Disable internal cycles.
         */
-       if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
+       if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
            np->s.device->revision < 0x1)
                np->rv_ccntl0   |=  DILS;
 
@@ -828,9 +828,9 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
         *  this driver. The generic ncr driver that does not use 
         *  LOAD/STORE instructions does not need this work-around.
         */
-       if ((np->device_id == PCI_DEVICE_ID_NCR_53C810 &&
+       if ((np->s.device->device == PCI_DEVICE_ID_NCR_53C810 &&
             np->s.device->revision >= 0x10 && np->s.device->revision <= 0x11) ||
-           (np->device_id == PCI_DEVICE_ID_NCR_53C860 &&
+           (np->s.device->device == PCI_DEVICE_ID_NCR_53C860 &&
             np->s.device->revision <= 0x1))
                np->features &= ~(FE_WRIE|FE_ERL|FE_ERMP);
 
@@ -897,7 +897,7 @@ static int sym_prepare_setting(struct Scsi_Host *shost, struct sym_hcb *np, stru
        if ((SYM_SETUP_SCSI_LED || 
             (nvram->type == SYM_SYMBIOS_NVRAM ||
              (nvram->type == SYM_TEKRAM_NVRAM &&
-              np->device_id == PCI_DEVICE_ID_NCR_53C895))) &&
+              np->s.device->device == PCI_DEVICE_ID_NCR_53C895))) &&
            !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01))
                np->features |= FE_LED0;
 
@@ -1798,7 +1798,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
        /*
         *  For now, disable AIP generation on C1010-66.
         */
-       if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_66)
+       if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_66)
                OUTB(np, nc_aipcntl1, DISAIP);
 
        /*
@@ -1808,7 +1808,7 @@ void sym_start_up (struct sym_hcb *np, int reason)
         *  that from SCRIPTS for each selection/reselection, but 
         *  I just don't want. :)
         */
-       if (np->device_id == PCI_DEVICE_ID_LSI_53C1010_33 &&
+       if (np->s.device->device == PCI_DEVICE_ID_LSI_53C1010_33 &&
            np->s.device->revision < 1)
                OUTB(np, nc_stest1, INB(np, nc_stest1) | 0x30);
 
@@ -1817,9 +1817,9 @@ void sym_start_up (struct sym_hcb *np, int reason)
         *  Disable overlapped arbitration for some dual function devices, 
         *  regardless revision id (kind of post-chip-design feature. ;-))
         */
-       if (np->device_id == PCI_DEVICE_ID_NCR_53C875)
+       if (np->s.device->device == PCI_DEVICE_ID_NCR_53C875)
                OUTB(np, nc_ctest0, (1<<5));
-       else if (np->device_id == PCI_DEVICE_ID_NCR_53C896)
+       else if (np->s.device->device == PCI_DEVICE_ID_NCR_53C896)
                np->rv_ccntl0 |= DPR;
 
        /*
index 3aa8060a4d2a3c826215bc20b23aa3dd602d424c..b8908e10162a6df153f62dad78b06eede4d47385 100644 (file)
@@ -918,7 +918,6 @@ struct sym_hcb {
        /*
         *  General controller parameters and configuration.
         */
-       u_short device_id;      /* PCI device id                */
        u_int   features;       /* Chip features map            */
        u_char  myaddr;         /* SCSI id of the adapter       */
        u_char  maxburst;       /* log base 2 of dwords burst   */
index 15d69298ab6ec9668e14bc83a091c15eb17e53f1..5662fbb3ff60d40dd12e14cfcdd104400e4d2123 100644 (file)
@@ -696,7 +696,7 @@ static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram)
        u_short csum;
        int x;
 
-       switch (np->device_id) {
+       switch (np->pdev->device) {
        case PCI_DEVICE_ID_NCR_53C885:
        case PCI_DEVICE_ID_NCR_53C895:
        case PCI_DEVICE_ID_NCR_53C896: