ARM: OMAP2+: serial: Remove the un-used slave idle hooks
authorSantosh Shilimkar <santosh.shilimkar@ti.com>
Wed, 15 May 2013 14:48:40 +0000 (20:18 +0530)
committerPaul Walmsley <paul@pwsan.com>
Sun, 19 May 2013 22:37:01 +0000 (16:37 -0600)
UART IP idle handling now taken care by runtime pm backend(hwmod) indirectly
and OMAP serial driver is also cleaned up accordingly.

So remove the un-used slave idle platforms hooks now.

Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org> # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
arch/arm/mach-omap2/serial.c

index 8396b5b7e912d91e48adbcc3b785041845b9f677..f6601563aa6903f93e04f9656a58593907f89b0e 100644 (file)
@@ -95,38 +95,9 @@ static void omap_uart_enable_wakeup(struct device *dev, bool enable)
                omap_hwmod_disable_wakeup(od->hwmods[0]);
 }
 
-/*
- * Errata i291: [UART]:Cannot Acknowledge Idle Requests
- * in Smartidle Mode When Configured for DMA Operations.
- * WA: configure uart in force idle mode.
- */
-static void omap_uart_set_noidle(struct device *dev)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct omap_device *od = to_omap_device(pdev);
-
-       omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_NO);
-}
-
-static void omap_uart_set_smartidle(struct device *dev)
-{
-       struct platform_device *pdev = to_platform_device(dev);
-       struct omap_device *od = to_omap_device(pdev);
-       u8 idlemode;
-
-       if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
-               idlemode = HWMOD_IDLEMODE_SMART_WKUP;
-       else
-               idlemode = HWMOD_IDLEMODE_SMART;
-
-       omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
-}
-
 #else
 static void omap_uart_enable_wakeup(struct device *dev, bool enable)
 {}
-static void omap_uart_set_noidle(struct device *dev) {}
-static void omap_uart_set_smartidle(struct device *dev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
@@ -299,8 +270,6 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
        omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
        omap_up.flags = UPF_BOOT_AUTOCONF;
        omap_up.get_context_loss_count = omap_pm_get_dev_context_loss_count;
-       omap_up.set_forceidle = omap_uart_set_smartidle;
-       omap_up.set_noidle = omap_uart_set_noidle;
        omap_up.enable_wakeup = omap_uart_enable_wakeup;
        omap_up.dma_rx_buf_size = info->dma_rx_buf_size;
        omap_up.dma_rx_timeout = info->dma_rx_timeout;