--- /dev/null
+# $Id: Makefile 2480 2005-11-14 02:07:33Z nbd $
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=wlc
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/wlc
+
+include $(TOPDIR)/package/rules.mk
+
+define Package/wlc
+SECTION:=base
+CATEGORY:=Base system
+DEPENDS:=@PACKAGE_KMOD_BRCM_WL
+DEFAULT:=y
+TITLE:=Utility for configuring the Broadcom wl driver
+DESCRIPTION:=Utility for configuring the Broadcom wl driver
+endef
+
+
+define Build/Prepare
+ mkdir -p $(PKG_BUILD_DIR)
+ $(CP) src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR)\
+ $(TARGET_CONFIGURE_OPTS) \
+ CC="$(TARGET_CC)" \
+ CFLAGS="-I$(PKG_BUILD_DIR)/include $(TARGET_CFLAGS)" \
+ all
+endef
+
+define Package/wlc/install
+ install -d -m0755 $(1)/sbin
+ install -m0755 $(PKG_BUILD_DIR)/wlc $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,wlc))
--- /dev/null
+all: wlc
+clean:
+ rm -f *.o wlc
+
+wlc: wlc.o ioctl.o
+%.o: %.c
+ $(CC) $(CFLAGS) -Wall -c -o $@ $<
+
+.PHONY: all clean
--- /dev/null
+/*
+ * Misc system wide definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: bcmdefs.h,v 1.1.1.3 2006/04/08 06:13:39 honor Exp $
+ */
+
+#ifndef _bcmdefs_h_
+#define _bcmdefs_h_
+
+/*
+ * One doesn't need to include this file explicitly, gets included automatically if
+ * typedefs.h is included.
+ */
+
+/* Reclaiming text and data :
+ * The following macros specify special linker sections that can be reclaimed
+ * after a system is considered 'up'.
+ */
+#if defined(__GNUC__) && defined(BCMRECLAIM)
+extern bool bcmreclaimed;
+#define BCMINITDATA(_data) __attribute__ ((__section__ (".dataini." #_data))) _data
+#define BCMINITFN(_fn) __attribute__ ((__section__ (".textini." #_fn))) _fn
+#else /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
+#define BCMINITDATA(_data) _data
+#define BCMINITFN(_fn) _fn
+#define bcmreclaimed 0
+#endif /* #if defined(__GNUC__) && defined(BCMRECLAIM) */
+
+/* Reclaim uninit functions if BCMNODOWN is defined */
+/* and if they are not already removed by -gc-sections */
+#ifdef BCMNODOWN
+#define BCMUNINITFN(_fn) BCMINITFN(_fn)
+#else
+#define BCMUNINITFN(_fn) _fn
+#endif
+
+#ifdef BCMRECLAIM
+#define CONST
+#else
+#define CONST const
+#endif /* BCMRECLAIM */
+
+/* Compatibility with old-style BCMRECLAIM */
+#define BCMINIT(_id) _id
+
+
+/* Put some library data/code into ROM to reduce RAM requirements */
+#if defined(__GNUC__) && defined(BCMROMOFFLOAD)
+#define BCMROMDATA(_data) __attribute__ ((__section__ (".datarom." #_data))) _data
+#define BCMROMFN(_fn) __attribute__ ((__section__ (".textrom." #_fn))) _fn
+#else
+#define BCMROMDATA(_data) _data
+#define BCMROMFN(_fn) _fn
+#endif
+
+/* Bus types */
+#define SB_BUS 0 /* Silicon Backplane */
+#define PCI_BUS 1 /* PCI target */
+#define PCMCIA_BUS 2 /* PCMCIA target */
+#define SDIO_BUS 3 /* SDIO target */
+#define JTAG_BUS 4 /* JTAG */
+#define NO_BUS 0xFF /* Bus that does not support R/W REG */
+
+/* Allows optimization for single-bus support */
+#ifdef BCMBUSTYPE
+#define BUSTYPE(bus) (BCMBUSTYPE)
+#else
+#define BUSTYPE(bus) (bus)
+#endif
+
+/* Defines for DMA Address Width - Shared between OSL and HNDDMA */
+#define DMADDR_MASK_32 0x0 /* Address mask for 32-bits */
+#define DMADDR_MASK_30 0xc0000000 /* Address mask for 30-bits */
+#define DMADDR_MASK_0 0xffffffff /* Address mask for 0-bits (hi-part) */
+
+#define DMADDRWIDTH_30 30 /* 30-bit addressing capability */
+#define DMADDRWIDTH_32 32 /* 32-bit addressing capability */
+#define DMADDRWIDTH_63 63 /* 64-bit addressing capability */
+#define DMADDRWIDTH_64 64 /* 64-bit addressing capability */
+
+/* packet headroom necessary to accomodate the largest header in the system, (i.e TXOFF).
+ * By doing, we avoid the need to allocate an extra buffer for the header when bridging to WL.
+ * There is a compile time check in wlc.c which ensure that this value is at least as big
+ * as TXOFF. This value is used in dma_rxfill (hnddma.c).
+ */
+#define BCMEXTRAHDROOM 160
+
+/* Headroom required for dongle-to-host communication. Packets allocated
+ * locally in the dongle (e.g. for CDC ioctls or RNDIS messages) should
+ * leave this much room in front for low-level message headers which may
+ * be needed to get across the dongle bus to the host. (These messages
+ * don't go over the network, so room for the full WL header above would
+ * be a waste.)
+ */
+#define BCMDONGLEHDRSZ 8
+
+
+
+#endif /* _bcmdefs_h_ */
--- /dev/null
+/*
+ * Misc useful os-independent macros and functions.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: bcmutils.h,v 1.1.1.16 2006/04/08 06:13:39 honor Exp $
+ */
+
+#ifndef _bcmutils_h_
+#define _bcmutils_h_
+
+/* ** driver/apps-shared section ** */
+
+#define BCME_STRLEN 64 /* Max string length for BCM errors */
+#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
+
+
+/*
+ * error codes could be added but the defined ones shouldn't be changed/deleted
+ * these error codes are exposed to the user code
+ * when ever a new error code is added to this list
+ * please update errorstring table with the related error string and
+ * update osl files with os specific errorcode map
+*/
+
+#define BCME_OK 0 /* Success */
+#define BCME_ERROR -1 /* Error generic */
+#define BCME_BADARG -2 /* Bad Argument */
+#define BCME_BADOPTION -3 /* Bad option */
+#define BCME_NOTUP -4 /* Not up */
+#define BCME_NOTDOWN -5 /* Not down */
+#define BCME_NOTAP -6 /* Not AP */
+#define BCME_NOTSTA -7 /* Not STA */
+#define BCME_BADKEYIDX -8 /* BAD Key Index */
+#define BCME_RADIOOFF -9 /* Radio Off */
+#define BCME_NOTBANDLOCKED -10 /* Not band locked */
+#define BCME_NOCLK -11 /* No Clock */
+#define BCME_BADRATESET -12 /* BAD Rate valueset */
+#define BCME_BADBAND -13 /* BAD Band */
+#define BCME_BUFTOOSHORT -14 /* Buffer too short */
+#define BCME_BUFTOOLONG -15 /* Buffer too long */
+#define BCME_BUSY -16 /* Busy */
+#define BCME_NOTASSOCIATED -17 /* Not Associated */
+#define BCME_BADSSIDLEN -18 /* Bad SSID len */
+#define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */
+#define BCME_BADCHAN -20 /* Bad Channel */
+#define BCME_BADADDR -21 /* Bad Address */
+#define BCME_NORESOURCE -22 /* Not Enough Resources */
+#define BCME_UNSUPPORTED -23 /* Unsupported */
+#define BCME_BADLEN -24 /* Bad length */
+#define BCME_NOTREADY -25 /* Not Ready */
+#define BCME_EPERM -26 /* Not Permitted */
+#define BCME_NOMEM -27 /* No Memory */
+#define BCME_ASSOCIATED -28 /* Associated */
+#define BCME_RANGE -29 /* Not In Range */
+#define BCME_NOTFOUND -30 /* Not Found */
+#define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */
+#define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */
+#define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */
+#define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */
+#define BCME_SDIO_ERROR -35 /* SDIO Bus Error */
+#define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */
+#define BCME_LAST BCME_DONGLE_DOWN
+
+/* These are collection of BCME Error strings */
+#define BCMERRSTRINGTABLE { \
+ "OK", \
+ "Undefined error", \
+ "Bad Argument", \
+ "Bad Option", \
+ "Not up", \
+ "Not down", \
+ "Not AP", \
+ "Not STA", \
+ "Bad Key Index", \
+ "Radio Off", \
+ "Not band locked", \
+ "No clock", \
+ "Bad Rate valueset", \
+ "Bad Band", \
+ "Buffer too short", \
+ "Buffer too long", \
+ "Busy", \
+ "Not Associated", \
+ "Bad SSID len", \
+ "Out of Range Channel", \
+ "Bad Channel", \
+ "Bad Address", \
+ "Not Enough Resources", \
+ "Unsupported", \
+ "Bad length", \
+ "Not Ready", \
+ "Not Permitted", \
+ "No Memory", \
+ "Associated", \
+ "Not In Range", \
+ "Not Found", \
+ "WME Not Enabled", \
+ "TSPEC Not Found", \
+ "ACM Not Supported", \
+ "Not WME Association", \
+ "SDIO Bus Error", \
+ "Dongle Not Accessible" \
+}
+
+#ifndef ABS
+#define ABS(a) (((a) < 0)?-(a):(a))
+#endif /* ABS */
+
+#ifndef MIN
+#define MIN(a, b) (((a) < (b))?(a):(b))
+#endif /* MIN */
+
+#ifndef MAX
+#define MAX(a, b) (((a) > (b))?(a):(b))
+#endif /* MAX */
+
+#define CEIL(x, y) (((x) + ((y)-1)) / (y))
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
+#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
+#define VALID_MASK(mask) !((mask) & ((mask) + 1))
+#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
+
+/* bit map related macros */
+#ifndef setbit
+#ifndef NBBY /* the BSD family defines NBBY */
+#define NBBY 8 /* 8 bits per byte */
+#endif /* #ifndef NBBY */
+#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define isset(a, i) (((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define isclr(a, i) ((((uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif /* setbit */
+
+#define NBITS(type) (sizeof(type) * 8)
+#define NBITVAL(nbits) (1 << (nbits))
+#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
+#define NBITMASK(nbits) MAXBITVAL(nbits)
+#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
+
+/* basic mux operation - can be optimized on several architectures */
+#define MUX(pred, true, false) ((pred) ? (true) : (false))
+
+/* modulo inc/dec - assumes x E [0, bound - 1] */
+#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
+
+/* modulo inc/dec, bound = 2^k */
+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
+
+/* modulo add/sub - assumes x, y E [0, bound - 1] */
+#define MODADD(x, y, bound) \
+ MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
+#define MODSUB(x, y, bound) \
+ MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
+
+/* module add/sub, bound = 2^k */
+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
+
+/* crc defines */
+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
+
+/* bcm_format_flags() bit description structure */
+typedef struct bcm_bit_desc {
+ uint32 bit;
+ char* name;
+} bcm_bit_desc_t;
+
+/* tag_ID/length/value_buffer tuple */
+typedef struct bcm_tlv {
+ uint8 id;
+ uint8 len;
+ uint8 data[1];
+} bcm_tlv_t;
+
+/* Check that bcm_tlv_t fits into the given buflen */
+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
+
+/* buffer length for ethernet address from bcm_ether_ntoa() */
+#define ETHER_ADDR_STR_LEN 18 /* 18-bytes of Ethernet address buffer length */
+
+/* unaligned load and store macros */
+#ifdef IL_BIGENDIAN
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+ a[0] = (v >> 24) & 0xff;
+ a[1] = (v >> 16) & 0xff;
+ a[2] = (v >> 8) & 0xff;
+ a[3] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+ return ((a[0] << 8) | a[1]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+ a[0] = (v >> 8) & 0xff;
+ a[1] = v & 0xff;
+}
+
+#else
+
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+ a[3] = (v >> 24) & 0xff;
+ a[2] = (v >> 16) & 0xff;
+ a[1] = (v >> 8) & 0xff;
+ a[0] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+ return ((a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+ a[1] = (v >> 8) & 0xff;
+ a[0] = v & 0xff;
+}
+
+#endif /* IL_BIGENDIAN */
+
+#endif /* _bcmutils_h_ */
--- /dev/null
+/*
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental types and constants relating to 802.11
+ *
+ * $Id: 802.11.h,v 1.1.1.17 2006/04/15 01:29:08 michael Exp $
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#pragma pack(1)
+#define PACKED
+#endif
+
+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN 24 /* d11 header length with A3 */
+#define DOT11_A4_HDR_LEN 30 /* d11 header length with A4 */
+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN /* MAC header length */
+#define DOT11_FCS_LEN 4 /* d11 FCS length */
+#define DOT11_ICV_LEN 4 /* d11 ICV length */
+#define DOT11_ICV_AES_LEN 8 /* d11 ICV/AES length */
+#define DOT11_QOS_LEN 2 /* d11 QoS length */
+#define DOT11_HTC_LEN 4 /* d11 HT Control field length */
+
+#define DOT11_KEY_INDEX_SHIFT 6 /* d11 key index shift */
+#define DOT11_IV_LEN 4 /* d11 IV length */
+#define DOT11_IV_TKIP_LEN 8 /* d11 IV TKIP length */
+#define DOT11_IV_AES_OCB_LEN 4 /* d11 IV/AES/OCB length */
+#define DOT11_IV_AES_CCM_LEN 8 /* d11 IV/AES/CCM length */
+#define DOT11_IV_MAX_LEN 8 /* maximum iv len for any encryption */
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN 2304 /* max MPDU body length */
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \
+ DOT11_QOS_LEN + \
+ DOT11_IV_AES_CCM_LEN + \
+ DOT11_MAX_MPDU_BODY_LEN + \
+ DOT11_ICV_LEN + \
+ DOT11_FCS_LEN) /* d11 max MPDU length */
+
+#define DOT11_MAX_SSID_LEN 32 /* d11 max ssid length */
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN 2347 /* d11 default RTS length */
+#define DOT11_MAX_RTS_LEN 2347 /* d11 max RTS length */
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN 256 /* d11 min fragmentation length */
+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength
+ * of the attached PHY
+ */
+#define DOT11_DEFAULT_FRAG_LEN 2346 /* d11 default fragmentation length */
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD 1 /* d11 min beacon period */
+#define DOT11_MAX_BEACON_PERIOD 0xFFFF /* d11 max beacon period */
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD 1 /* d11 min DTIM period */
+#define DOT11_MAX_DTIM_PERIOD 0xFF /* d11 max DTIM period */
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN 8 /* d11 LLC/SNAP header length */
+#define DOT11_OUI_LEN 3 /* d11 OUI length */
+struct dot11_llc_snap_header {
+ uint8 dsap; /* always 0xAA */
+ uint8 ssap; /* always 0xAA */
+ uint8 ctl; /* always 0x03 */
+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
+ * Bridge-Tunnel: 0x00 0x00 0xF8
+ */
+ uint16 type; /* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN) /* RCF1042 header length */
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ * The fields are defined such that the shorter 1, 2, and 3
+ * address headers just use the first k fields.
+ */
+struct dot11_header {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr a1; /* address 1 */
+ struct ether_addr a2; /* address 2 */
+ struct ether_addr a3; /* address 3 */
+ uint16 seq; /* sequence control */
+ struct ether_addr a4; /* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr ta; /* transmitter address */
+} PACKED;
+#define DOT11_RTS_LEN 16 /* d11 RTS frame length */
+
+struct dot11_cts_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+} PACKED;
+#define DOT11_CTS_LEN 10 /* d11 CTS frame length */
+
+struct dot11_ack_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+} PACKED;
+#define DOT11_ACK_LEN 10 /* d11 ACK frame length */
+
+struct dot11_ps_poll_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* AID */
+ struct ether_addr bssid; /* receiver address, STA in AP */
+ struct ether_addr ta; /* transmitter address */
+} PACKED;
+#define DOT11_PS_POLL_LEN 16 /* d11 PS poll frame length */
+
+struct dot11_cf_end_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr bssid; /* transmitter address, STA in AP */
+} PACKED;
+#define DOT11_CS_END_LEN 16 /* d11 CF-END frame length */
+
+/* BA/BAR Control parameters */
+#define DOT11_BA_CTL_POLICY_NORMAL 0x0000 /* normal ack */
+#define DOT11_BA_CTL_POLICY_NOACK 0x0001 /* no ack */
+#define DOT11_BA_CTL_POLICY_MASK 0x0001 /* ack policy mask */
+
+#define DOT11_BA_CTL_MTID 0x0002 /* multi tid BA */
+#define DOT11_BA_CTL_COMPRESSED 0x0004 /* compressed bitmap */
+
+#define DOT11_BA_CTL_NUMMSDU_MASK 0x0FC0 /* num msdu in bitmap mask */
+#define DOT11_BA_CTL_NUMMSDU_SHIFT 6 /* num msdu in bitmap shift */
+
+#define DOT11_BA_CTL_TID_MASK 0xF000 /* tid mask */
+#define DOT11_BA_CTL_TID_SHIFT 12 /* tid shift */
+
+struct dot11_ba_req_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr ta; /* transmitter address */
+ uint16 bar_control; /* BAR Control */
+ uint16 seqnum; /* Starting Sequence control */
+} PACKED;
+#define DOT11_BA_REQ_LEN 20 /* BAR frame length */
+
+#define DOT11_BA_BITMAP_LEN 128 /* bitmap length */
+#define DOT11_BA_CMP_BITMAP_LEN 8 /* compressed bitmap length */
+struct dot11_ba_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr ta; /* transmitter address */
+ uint16 ba_control; /* BA Control */
+ uint16 seqnum; /* Starting Sequence control */
+ uint8 bitmap[DOT11_BA_BITMAP_LEN]; /* Block Ack Bitmap */
+} PACKED;
+#define DOT11_BA_LEN 20 /* BA frame length (without bitmap) */
+
+/* Management frame header */
+struct dot11_management_header {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr da; /* receiver address */
+ struct ether_addr sa; /* transmitter address */
+ struct ether_addr bssid; /* BSS ID */
+ uint16 seq; /* sequence control */
+} PACKED;
+#define DOT11_MGMT_HDR_LEN 24 /* d11 management header length */
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+ uint32 timestamp[2];
+ uint16 beacon_interval;
+ uint16 capability;
+} PACKED;
+#define DOT11_BCN_PRB_LEN 12 /* d11 beacon probe frame length */
+
+struct dot11_auth {
+ uint16 alg; /* algorithm */
+ uint16 seq; /* sequence control */
+ uint16 status; /* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info
+ * elt
+ */
+
+struct dot11_assoc_req {
+ uint16 capability; /* capability information */
+ uint16 listen; /* listen interval */
+} PACKED;
+#define DOT11_ASSOC_REQ_FIXED_LEN 4 /* length of assoc frame without info elts */
+
+struct dot11_reassoc_req {
+ uint16 capability; /* capability information */
+ uint16 listen; /* listen interval */
+ struct ether_addr ap; /* Current AP address */
+} PACKED;
+#define DOT11_REASSOC_REQ_FIXED_LEN 10 /* length of assoc frame without info elts */
+
+struct dot11_assoc_resp {
+ uint16 capability; /* capability information */
+ uint16 status; /* status code */
+ uint16 aid; /* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint8 data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN 3 /* d11 action measurement header length */
+
+struct dot11_action_switch_channel {
+ uint8 category;
+ uint8 action;
+ uint8 data[5]; /* for switch IE */
+} PACKED;
+
+struct dot11_action_ht_ch_width {
+ uint8 category;
+ uint8 action;
+ uint8 ch_width;
+} PACKED;
+
+struct dot11_action_ht_mimops {
+ uint8 category;
+ uint8 action;
+ uint8 enable;
+ uint8 psmode;
+} PACKED;
+
+/* ************* 802.11h related definitions. ************* */
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 power;
+} dot11_power_cnst_t;
+
+typedef struct {
+ uint8 min;
+ uint8 max;
+} dot11_power_cap_t;
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 tx_pwr;
+ uint8 margin;
+} dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 first_channel;
+ uint8 num_channels;
+} dot11_supp_channels_t;
+
+/* channel switch announcement (CSA) mode type - 802.11h-2003 $7.3.2.20 */
+#define DOT11_CSA_MODE_ADVISORY 0 /* no DOT11_CSA_MODE_NO_TX restriction imposed */
+#define DOT11_CSA_MODE_NO_TX 1 /* no transmission upon receiving CSA frame. */
+
+/* CSA IE data structure */
+struct dot11_channel_switch {
+ uint8 id;
+ uint8 len;
+ uint8 mode;
+ uint8 channel;
+ uint8 count;
+} PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
+#define DOT11_SWITCH_IE_LEN 3 /* length of IE data, not including 2 byte header */
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 0 /* d11 measurement basic type */
+#define DOT11_MEASURE_TYPE_CCA 1 /* d11 measurement CCA type */
+#define DOT11_MEASURE_TYPE_RPI 2 /* d11 measurement PRI type */
+
+/* Measurement Mode field */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE (1<<1) /* d11 measurement enable */
+#define DOT11_MEASURE_MODE_REQUEST (1<<2) /* d11 measurement request */
+#define DOT11_MEASURE_MODE_REPORT (1<<3) /* d11 measurement report */
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE (1<<0) /* d11 measurement late */
+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1) /* d11 measurement incapable */
+#define DOT11_MEASURE_MODE_REFUSED (1<<2) /* d11 measurement refuse */
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0)) /* d11 measurement basic map BSS */
+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1)) /* d11 measurement map OFDM */
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2)) /* d11 measurement map unknown */
+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3)) /* d11 measurement map radar */
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4)) /* d11 measurement map unmeasuremnt */
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+} dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14 /* d11 measurement request IE length */
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3 /* d11 measurement request IE fixed length */
+
+struct dot11_meas_rep {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ union
+ {
+ struct {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+ } PACKED basic;
+ uint8 data[1];
+ } PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN 3 /* d11 measurement response IE fixed length */
+
+struct dot11_meas_rep_basic {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN 12 /* d11 measurement basic report length */
+
+struct dot11_quiet {
+ uint8 id;
+ uint8 len;
+ uint8 count; /* TBTTs until beacon interval in quiet starts */
+ uint8 period; /* Beacon intervals between periodic quiet periods ? */
+ uint16 duration; /* Length of quiet period, in TU's */
+ uint16 offset; /* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+typedef struct {
+ uint8 channel;
+ uint8 map;
+} chan_map_tuple_t;
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 eaddr[ETHER_ADDR_LEN];
+ uint8 interval;
+ chan_map_tuple_t map[1];
+} dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI "\x00\x50\xf2" /* WME OUI */
+#define WME_VER 1 /* WME version */
+#define WME_TYPE 2 /* WME type */
+#define WME_SUBTYPE_IE 0 /* Information Element */
+#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */
+#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE 0 /* Best Effort */
+#define AC_BK 1 /* Background */
+#define AC_VI 2 /* Video */
+#define AC_VO 3 /* Voice */
+#define AC_COUNT 4 /* number of ACs */
+
+typedef uint8 ac_bitmap_t; /* AC bitmap of (1 << AC_xx) */
+
+#define AC_BITMAP_NONE 0x0 /* No ACs */
+#define AC_BITMAP_ALL 0xf /* All ACs */
+#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0)
+
+/* WME Information Element (IE) */
+struct wme_ie {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 qosinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7 /* WME IE length */
+
+struct edcf_acparam {
+ uint8 ACI;
+ uint8 ECW;
+ uint16 TXOP; /* stored in network order (ls octet first) */
+} PACKED;
+typedef struct edcf_acparam edcf_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_param_ie {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 qosinfo;
+ uint8 rsvd;
+ edcf_acparam_t acparam[AC_COUNT];
+} PACKED;
+typedef struct wme_param_ie wme_param_ie_t;
+#define WME_PARAM_IE_LEN 24 /* WME Parameter IE length */
+
+/* QoS Info field for IE as sent from AP */
+#define WME_QI_AP_APSD_MASK 0x80 /* U-APSD Supported mask */
+#define WME_QI_AP_APSD_SHIFT 7 /* U-APSD Supported shift */
+#define WME_QI_AP_COUNT_MASK 0x0f /* Parameter set count mask */
+#define WME_QI_AP_COUNT_SHIFT 0 /* Parameter set count shift */
+
+/* QoS Info field for IE as sent from STA */
+#define WME_QI_STA_MAXSPLEN_MASK 0x60 /* Max Service Period Length mask */
+#define WME_QI_STA_MAXSPLEN_SHIFT 5 /* Max Service Period Length shift */
+#define WME_QI_STA_APSD_ALL_MASK 0xf /* APSD all AC bits mask */
+#define WME_QI_STA_APSD_ALL_SHIFT 0 /* APSD all AC bits shift */
+#define WME_QI_STA_APSD_BE_MASK 0x8 /* APSD AC_BE mask */
+#define WME_QI_STA_APSD_BE_SHIFT 3 /* APSD AC_BE shift */
+#define WME_QI_STA_APSD_BK_MASK 0x4 /* APSD AC_BK mask */
+#define WME_QI_STA_APSD_BK_SHIFT 2 /* APSD AC_BK shift */
+#define WME_QI_STA_APSD_VI_MASK 0x2 /* APSD AC_VI mask */
+#define WME_QI_STA_APSD_VI_SHIFT 1 /* APSD AC_VI shift */
+#define WME_QI_STA_APSD_VO_MASK 0x1 /* APSD AC_VO mask */
+#define WME_QI_STA_APSD_VO_SHIFT 0 /* APSD AC_VO shift */
+
+/* ACI */
+#define EDCF_AIFSN_MIN 1 /* AIFSN minimum value */
+#define EDCF_AIFSN_MAX 15 /* AIFSN maximum value */
+#define EDCF_AIFSN_MASK 0x0f /* AIFSN mask */
+#define EDCF_ACM_MASK 0x10 /* ACM mask */
+#define EDCF_ACI_MASK 0x60 /* ACI mask */
+#define EDCF_ACI_SHIFT 5 /* ACI shift */
+
+/* ECW */
+#define EDCF_ECW_MIN 0 /* cwmin/cwmax exponent minimum value */
+#define EDCF_ECW_MAX 15 /* cwmin/cwmax exponent maximum value */
+#define EDCF_ECW2CW(exp) ((1 << (exp)) - 1)
+#define EDCF_ECWMIN_MASK 0x0f /* cwmin exponent form mask */
+#define EDCF_ECWMAX_MASK 0xf0 /* cwmax exponent form mask */
+#define EDCF_ECWMAX_SHIFT 4 /* cwmax exponent form shift */
+
+/* TXOP */
+#define EDCF_TXOP_MIN 0 /* TXOP minimum value */
+#define EDCF_TXOP_MAX 65535 /* TXOP maximum value */
+#define EDCF_TXOP2USEC(txop) ((txop) << 5)
+
+/* Default EDCF parameters that AP advertises for STA to use; WMM draft Table 12 */
+#define EDCF_AC_BE_ACI_STA 0x03 /* STA ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_STA 0xA4 /* STA ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_STA 0x0000 /* STA TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_STA 0x27 /* STA ACI value for background AC */
+#define EDCF_AC_BK_ECW_STA 0xA4 /* STA ECW value for background AC */
+#define EDCF_AC_BK_TXOP_STA 0x0000 /* STA TXOP value for background AC */
+#define EDCF_AC_VI_ACI_STA 0x42 /* STA ACI value for video AC */
+#define EDCF_AC_VI_ECW_STA 0x43 /* STA ECW value for video AC */
+#define EDCF_AC_VI_TXOP_STA 0x005e /* STA TXOP value for video AC */
+#define EDCF_AC_VO_ACI_STA 0x62 /* STA ACI value for audio AC */
+#define EDCF_AC_VO_ECW_STA 0x32 /* STA ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_STA 0x002f /* STA TXOP value for audio AC */
+
+/* Default EDCF parameters that AP uses; WMM draft Table 14 */
+#define EDCF_AC_BE_ACI_AP 0x03 /* AP ACI value for best effort AC */
+#define EDCF_AC_BE_ECW_AP 0x64 /* AP ECW value for best effort AC */
+#define EDCF_AC_BE_TXOP_AP 0x0000 /* AP TXOP value for best effort AC */
+#define EDCF_AC_BK_ACI_AP 0x27 /* AP ACI value for background AC */
+#define EDCF_AC_BK_ECW_AP 0xA4 /* AP ECW value for background AC */
+#define EDCF_AC_BK_TXOP_AP 0x0000 /* AP TXOP value for background AC */
+#define EDCF_AC_VI_ACI_AP 0x41 /* AP ACI value for video AC */
+#define EDCF_AC_VI_ECW_AP 0x43 /* AP ECW value for video AC */
+#define EDCF_AC_VI_TXOP_AP 0x005e /* AP TXOP value for video AC */
+#define EDCF_AC_VO_ACI_AP 0x61 /* AP ACI value for audio AC */
+#define EDCF_AC_VO_ECW_AP 0x32 /* AP ECW value for audio AC */
+#define EDCF_AC_VO_TXOP_AP 0x002f /* AP TXOP value for audio AC */
+
+struct dot11_qbss_load_ie {
+ uint8 id; /* 11, DOT11_MNG_QBSS_LOAD_ID */
+ uint8 length;
+ uint16 station_count; /* total number of STAs associated */
+ uint8 channel_utilization; /* % of time, normalized to 255, QAP sensed medium busy */
+ uint16 aac; /* available admission capacity */
+} PACKED;
+typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t;
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */
+#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define INTEGER_SHIFT 13 /* integer shift */
+#define FRACTION_MASK 0x1FFF /* fraction mask */
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+ uint8 category; /* DOT11_ACTION_NOTIFICATION */
+ uint8 action;
+ uint8 token;
+ uint8 status;
+ uint8 data[1]; /* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */
+
+/* WME Action Codes */
+#define WME_ADDTS_REQUEST 0 /* WME ADDTS request */
+#define WME_ADDTS_RESPONSE 1 /* WME ADDTS response */
+#define WME_DELTS_REQUEST 2 /* WME DELTS request */
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED 0 /* WME admission accepted */
+#define WME_INVALID_PARAMETERS 1 /* WME invalide parameters */
+#define WME_ADMISSION_REFUSED 3 /* WME admission refused */
+
+/* Macro to take a pointer to a beacon or probe response
+ * header and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM 0 /* d11 open authentication */
+#define DOT11_SHARED_KEY 1 /* d11 shared authentication */
+#define DOT11_CHALLENGE_LEN 128 /* d11 chanllenge text length */
+
+/* Frame control macros */
+#define FC_PVER_MASK 0x3 /* PVER mask */
+#define FC_PVER_SHIFT 0 /* PVER shift */
+#define FC_TYPE_MASK 0xC /* type mask */
+#define FC_TYPE_SHIFT 2 /* type shift */
+#define FC_SUBTYPE_MASK 0xF0 /* subtype mask */
+#define FC_SUBTYPE_SHIFT 4 /* subtype shift */
+#define FC_TODS 0x100 /* to DS */
+#define FC_TODS_SHIFT 8 /* to DS shift */
+#define FC_FROMDS 0x200 /* from DS */
+#define FC_FROMDS_SHIFT 9 /* from DS shift */
+#define FC_MOREFRAG 0x400 /* more frag. */
+#define FC_MOREFRAG_SHIFT 10 /* more frag. shift */
+#define FC_RETRY 0x800 /* retry */
+#define FC_RETRY_SHIFT 11 /* retry shift */
+#define FC_PM 0x1000 /* PM */
+#define FC_PM_SHIFT 12 /* PM shift */
+#define FC_MOREDATA 0x2000 /* more data */
+#define FC_MOREDATA_SHIFT 13 /* more data shift */
+#define FC_WEP 0x4000 /* WEP */
+#define FC_WEP_SHIFT 14 /* WEP shift */
+#define FC_ORDER 0x8000 /* order */
+#define FC_ORDER_SHIFT 15 /* order shift */
+
+/* sequence control macros */
+#define SEQNUM_SHIFT 4 /* seq. number shift */
+#define SEQNUM_MAX 0x1000 /* max seqnum + 1 */
+#define FRAGNUM_MASK 0xF /* frag. number mask */
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG 0 /* management type */
+#define FC_TYPE_CTL 1 /* control type */
+#define FC_TYPE_DATA 2 /* data type */
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ 0 /* assoc. request */
+#define FC_SUBTYPE_ASSOC_RESP 1 /* assoc. response */
+#define FC_SUBTYPE_REASSOC_REQ 2 /* reassoc. request */
+#define FC_SUBTYPE_REASSOC_RESP 3 /* reassoc. response */
+#define FC_SUBTYPE_PROBE_REQ 4 /* probe request */
+#define FC_SUBTYPE_PROBE_RESP 5 /* probe response */
+#define FC_SUBTYPE_BEACON 8 /* beacon */
+#define FC_SUBTYPE_ATIM 9 /* ATIM */
+#define FC_SUBTYPE_DISASSOC 10 /* disassoc. */
+#define FC_SUBTYPE_AUTH 11 /* authentication */
+#define FC_SUBTYPE_DEAUTH 12 /* de-authentication */
+#define FC_SUBTYPE_ACTION 13 /* action */
+
+/* Control Subtypes */
+#define FC_SUBTYPE_BLOCKACK_REQ 8 /* Block Ack Req */
+#define FC_SUBTYPE_BLOCKACK 9 /* Block Ack */
+#define FC_SUBTYPE_PS_POLL 10 /* PS poll */
+#define FC_SUBTYPE_RTS 11 /* RTS */
+#define FC_SUBTYPE_CTS 12 /* CTS */
+#define FC_SUBTYPE_ACK 13 /* ACK */
+#define FC_SUBTYPE_CF_END 14 /* CF-END */
+#define FC_SUBTYPE_CF_END_ACK 15 /* CF-END ACK */
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA 0 /* Data */
+#define FC_SUBTYPE_DATA_CF_ACK 1 /* Data + CF-ACK */
+#define FC_SUBTYPE_DATA_CF_POLL 2 /* Data + CF-Poll */
+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3 /* Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_NULL 4 /* Null */
+#define FC_SUBTYPE_CF_ACK 5 /* CF-Ack */
+#define FC_SUBTYPE_CF_POLL 6 /* CF-Poll */
+#define FC_SUBTYPE_CF_ACK_POLL 7 /* CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA 8 /* QoS Data */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK 9 /* QoS Data + CF-Ack */
+#define FC_SUBTYPE_QOS_DATA_CF_POLL 10 /* QoS Data + CF-Poll */
+#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL 11 /* QoS Data + CF-Ack + CF-Poll */
+#define FC_SUBTYPE_QOS_NULL 12 /* QoS Null */
+#define FC_SUBTYPE_QOS_CF_POLL 14 /* QoS CF-Poll */
+#define FC_SUBTYPE_QOS_CF_ACK_POLL 15 /* QoS CF-Ack + CF-Poll */
+
+/* Data Subtype Groups */
+#define FC_SUBTYPE_ANY_QOS(s) (((s) & 8) != 0)
+#define FC_SUBTYPE_ANY_NULL(s) (((s) & 4) != 0)
+#define FC_SUBTYPE_ANY_CF_POLL(s) (((s) & 2) != 0)
+#define FC_SUBTYPE_ANY_CF_ACK(s) (((s) & 1) != 0)
+
+/* Type/Subtype Combos */
+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK) /* FC kind mask */
+
+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT)) /* FC kind */
+
+#define FC_SUBTYPE(fc) (((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT) /* Subtype from FC */
+#define FC_TYPE(fc) (((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT) /* Type from FC */
+
+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ) /* assoc. request */
+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP) /* assoc. response */
+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ) /* reassoc. request */
+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP) /* reassoc. response */
+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ) /* probe request */
+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP) /* probe response */
+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON) /* beacon */
+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC) /* disassoc */
+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH) /* authentication */
+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH) /* deauthentication */
+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION) /* action */
+
+#define FC_BLOCKACK_REQ FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ) /* Block Ack Req */
+#define FC_BLOCKACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK) /* Block Ack */
+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL) /* PS poll */
+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS) /* RTS */
+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS) /* CTS */
+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK) /* ACK */
+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END) /* CF-END */
+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK) /* CF-END ACK */
+
+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA) /* data */
+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL) /* null data */
+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK) /* data CF ACK */
+#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA) /* QoS data */
+#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL) /* QoS null */
+
+/* QoS Control Field */
+
+/* 802.1D Priority */
+#define QOS_PRIO_SHIFT 0 /* QoS priority shift */
+#define QOS_PRIO_MASK 0x0007 /* QoS priority mask */
+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT) /* QoS priority */
+
+/* Traffic Identifier */
+#define QOS_TID_SHIFT 0 /* QoS TID shift */
+#define QOS_TID_MASK 0x000f /* QoS TID mask */
+#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT) /* QoS TID */
+
+/* End of Service Period (U-APSD) */
+#define QOS_EOSP_SHIFT 4 /* QoS End of Service Period shift */
+#define QOS_EOSP_MASK 0x0010 /* QoS End of Service Period mask */
+#define QOS_EOSP(qos) (((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT) /* Qos EOSP */
+
+/* Ack Policy */
+#define QOS_ACK_NORMAL_ACK 0 /* Normal Ack */
+#define QOS_ACK_NO_ACK 1 /* No Ack (eg mcast) */
+#define QOS_ACK_NO_EXP_ACK 2 /* No Explicit Ack */
+#define QOS_ACK_BLOCK_ACK 3 /* Block Ack */
+#define QOS_ACK_SHIFT 5 /* QoS ACK shift */
+#define QOS_ACK_MASK 0x0060 /* QoS ACK mask */
+#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT) /* QoS ACK */
+
+/* A-MSDU flag */
+#define QOS_AMSDU_SHIFT 7 /* AMSDU shift */
+#define QOS_AMSDU_MASK 0x0080 /* AMSDU mask */
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN 2 /* d11 management auth. algo. length */
+#define DOT11_MNG_AUTH_SEQ_LEN 2 /* d11 management auth. seq. length */
+#define DOT11_MNG_BEACON_INT_LEN 2 /* d11 management beacon interval length */
+#define DOT11_MNG_CAP_LEN 2 /* d11 management cap. length */
+#define DOT11_MNG_AP_ADDR_LEN 6 /* d11 management AP address length */
+#define DOT11_MNG_LISTEN_INT_LEN 2 /* d11 management listen interval length */
+#define DOT11_MNG_REASON_LEN 2 /* d11 management reason length */
+#define DOT11_MNG_AID_LEN 2 /* d11 management AID length */
+#define DOT11_MNG_STATUS_LEN 2 /* d11 management status length */
+#define DOT11_MNG_TIMESTAMP_LEN 8 /* d11 management timestamp length */
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK 0x3fff /* d11 AID mask */
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED 0 /* d11 RC reserved */
+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer
+ * valid
+ */
+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station
+ * is leaving (or has left) IBSS or ESS
+ */
+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */
+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable
+ * to handle all currently associated
+ * stations
+ */
+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from
+ * nonauthenticated station
+ */
+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from
+ * nonassociated station
+ */
+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is
+ * leaving (or has left) BSS
+ */
+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is
+ * not authenticated with responding
+ * station
+ */
+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_STATUS_SUCCESS 0 /* Successful */
+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */
+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested
+ * capabilities in the Capability
+ * Information field
+ */
+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability
+ * to confirm that association exists
+ */
+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason
+ * outside the scope of this standard
+ */
+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support
+ * the specified authentication
+ * algorithm
+ */
+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame
+ * with authentication transaction
+ * sequence number out of expected
+ * sequence
+ */
+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of
+ * challenge failure
+ */
+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout
+ * waiting for next frame in sequence
+ */
+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is
+ * unable to handle additional
+ * associated stations
+ */
+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting
+ * station not supporting all of the
+ * data rates in the BSSBasicRateSet
+ * parameter
+ */
+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting
+ * station not supporting the Short
+ * Preamble option
+ */
+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting
+ * station not supporting the PBCC
+ * Modulation option
+ */
+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting
+ * station not supporting the Channel
+ * Agility option
+ */
+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum
+ * Management capability is required.
+ */
+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info
+ * in the Power Cap element is
+ * unacceptable.
+ */
+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info
+ * in the Supported Channel element is
+ * unacceptable
+ */
+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting
+ * station not supporting the Short Slot
+ * Time option
+ */
+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting
+ * station not supporting the ER-PBCC
+ * Modulation option
+ */
+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting
+ * station not supporting the DSS-OFDM
+ * option
+ */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN 1 /* d11 management DS parameter length */
+#define DOT11_MNG_IBSS_PARAM_LEN 2 /* d11 management IBSS parameter length */
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap
+ */
+#define DOT11_MNG_TIM_FIXED_LEN 3 /* d11 management TIM fixed length */
+#define DOT11_MNG_TIM_DTIM_COUNT 0 /* d11 management DTIM count */
+#define DOT11_MNG_TIM_DTIM_PERIOD 1 /* d11 management DTIM period */
+#define DOT11_MNG_TIM_BITMAP_CTL 2 /* d11 management TIM BITMAP control */
+#define DOT11_MNG_TIM_PVB 3 /* d11 management TIM PVB */
+
+/* TLV defines */
+#define TLV_TAG_OFF 0 /* tag offset */
+#define TLV_LEN_OFF 1 /* length offset */
+#define TLV_HDR_LEN 2 /* header length */
+#define TLV_BODY_OFF 2 /* body offset */
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID 0 /* d11 management SSID id */
+#define DOT11_MNG_RATES_ID 1 /* d11 management rates id */
+#define DOT11_MNG_FH_PARMS_ID 2 /* d11 management FH parameter id */
+#define DOT11_MNG_DS_PARMS_ID 3 /* d11 management DS parameter id */
+#define DOT11_MNG_CF_PARMS_ID 4 /* d11 management CF parameter id */
+#define DOT11_MNG_TIM_ID 5 /* d11 management TIM id */
+#define DOT11_MNG_IBSS_PARMS_ID 6 /* d11 management IBSS parameter id */
+#define DOT11_MNG_COUNTRY_ID 7 /* d11 management country id */
+#define DOT11_MNG_HOPPING_PARMS_ID 8 /* d11 management hopping parameter id */
+#define DOT11_MNG_HOPPING_TABLE_ID 9 /* d11 management hopping table id */
+#define DOT11_MNG_REQUEST_ID 10 /* d11 management request id */
+#define DOT11_MNG_QBSS_LOAD_ID 11 /* d11 management QBSS Load id */
+#define DOT11_MNG_CHALLENGE_ID 16 /* d11 management chanllenge id */
+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */
+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */
+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */
+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */
+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */
+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement */
+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */
+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */
+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */
+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
+#define DOT11_MNG_ERP_ID 42 /* d11 management ERP id */
+#define DOT11_MNG_TS_DELAY_ID 43 /* d11 management TS Delay id */
+#define DOT11_MNG_NONERP_ID 47 /* d11 management NON-ERP id */
+#define DOT11_MNG_RSN_ID 48 /* d11 management RSN id */
+#define DOT11_MNG_EXT_RATES_ID 50 /* d11 management ext. rates id */
+#define DOT11_MNG_WPA_ID 221 /* d11 management WPA id */
+#define DOT11_MNG_PROPR_ID 221 /* d11 management proprietary id */
+
+/* Rate element Basic flag and rate mask */
+#define DOT11_RATE_BASIC 0x80 /* flag for a Basic Rate */
+#define DOT11_RATE_MASK 0x7F /* mask for numeric part of rate */
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present
+ *in the BSS
+ */
+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for
+ *ERP-OFDM frames
+ */
+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed,
+ * 1 == not allowed
+ */
+/* TS Delay element offset & size */
+#define DOT11_MGN_TS_DELAY_LEN 4 /* length of TS DELAY IE */
+#define TS_DELAY_FIELD_SIZE 4 /* TS DELAY field size */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS 0x0001 /* d11 cap. ESS */
+#define DOT11_CAP_IBSS 0x0002 /* d11 cap. IBSS */
+#define DOT11_CAP_POLLABLE 0x0004 /* d11 cap. pollable */
+#define DOT11_CAP_POLL_RQ 0x0008 /* d11 cap. poll request */
+#define DOT11_CAP_PRIVACY 0x0010 /* d11 cap. privacy */
+#define DOT11_CAP_SHORT 0x0020 /* d11 cap. short */
+#define DOT11_CAP_PBCC 0x0040 /* d11 cap. PBCC */
+#define DOT11_CAP_AGILITY 0x0080 /* d11 cap. agility */
+#define DOT11_CAP_SPECTRUM 0x0100 /* d11 cap. spectrum */
+#define DOT11_CAP_SHORTSLOT 0x0400 /* d11 cap. shortslot */
+#define DOT11_CAP_CCK_OFDM 0x2000 /* d11 cap. CCK/OFDM */
+
+/* Action Frame Constants */
+#define DOT11_ACTION_CAT_ERR_MASK 0x80 /* d11 action category error mask */
+#define DOT11_ACTION_CAT_MASK 0x7F /* d11 action category mask */
+#define DOT11_ACTION_CAT_SPECT_MNG 0x00 /* d11 action category spectrum management */
+#define DOT11_ACTION_CAT_BLOCKACK 0x03 /* d11 action category block ack */
+#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */
+
+#define DOT11_ACTION_ID_M_REQ 0 /* d11 action measurement request */
+#define DOT11_ACTION_ID_M_REP 1 /* d11 action measurement response */
+#define DOT11_ACTION_ID_TPC_REQ 2 /* d11 action TPC request */
+#define DOT11_ACTION_ID_TPC_REP 3 /* d11 action TPC response */
+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4 /* d11 action channel switch */
+
+/* HT (EWC) action ids */
+#define DOT11_ACTION_ID_HT_CH_WIDTH 0 /* mimo ps action frame id */
+#define DOT11_ACTION_ID_HT_MIMO_PS 1 /* mimo ps action frame id */
+
+/* Block Ack action types */
+#define DOT11_BA_ACTION_ADDBA_REQ 0 /* ADDBA Req action frame type */
+#define DOT11_BA_ACTION_ADDBA_RESP 1 /* ADDBA Resp action frame type */
+#define DOT11_BA_ACTION_DELBA 2 /* DELBA action frame type */
+
+/* ADDBA action parameters */
+#define DOT11_ADDBA_PARAM_POLICY_MASK 0x0002 /* policy mask(ack vs delayed) */
+#define DOT11_ADDBA_PARAM_POLICY_SHIFT 1 /* policy shift */
+#define DOT11_ADDBA_PARAM_TID_MASK 0x003c /* tid mask */
+#define DOT11_ADDBA_PARAM_TID_SHIFT 2 /* tid shift */
+#define DOT11_ADDBA_PARAM_BSIZE_MASK 0xffc0 /* buffer size mask */
+#define DOT11_ADDBA_PARAM_BSIZE_SHIFT 6 /* buffer size shift */
+
+#define DOT11_ADDBA_POLICY_DELAYED 0 /* delayed BA policy */
+#define DOT11_ADDBA_POLICY_IMMEDIATE 1 /* immediate BA policy */
+
+struct dot11_addba_req {
+ uint8 category; /* category of action frame (3) */
+ uint8 action; /* action: addba req */
+ uint8 token; /* identifier */
+ uint16 addba_param_set; /* parameter set */
+ uint16 timeout; /* timeout in seconds */
+ uint16 start_seqnum; /* starting sequence number */
+}PACKED;
+typedef struct dot11_addba_req dot11_addba_req_t;
+#define DOT11_ADDBA_REQ_LEN 9 /* length of addba req frame */
+
+struct dot11_addba_resp {
+ uint8 category; /* category of action frame (3) */
+ uint8 action; /* action: addba resp */
+ uint8 token; /* identifier */
+ uint16 status; /* status of add request */
+ uint16 addba_param_set; /* negotiated parameter set */
+ uint16 timeout; /* negotiated timeout in seconds */
+}PACKED;
+typedef struct dot11_addba_resp dot11_addba_resp_t;
+#define DOT11_ADDBA_RESP_LEN 9 /* length of addba resp frame */
+
+/* DELBA action parameters */
+#define DOT11_DELBA_PARAM_INIT_MASK 0x0800 /* initiator mask */
+#define DOT11_DELBA_PARAM_INIT_SHIFT 11 /* initiator shift */
+#define DOT11_DELBA_PARAM_TID_MASK 0xf000 /* tid mask */
+#define DOT11_DELBA_PARAM_TID_SHIFT 12 /* tid shift */
+
+struct dot11_delba {
+ uint8 category; /* category of action frame (3) */
+ uint8 action; /* action: addba req */
+ uint16 delba_param_set; /* paarmeter set */
+ uint16 reason; /* reason for dellba */
+}PACKED;
+typedef struct dot11_delba dot11_delba_t;
+#define DOT11_DELBA_LEN 6 /* length of delba frame */
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE 0 /* d11 infrastructure */
+#define DOT11_BSSTYPE_INDEPENDENT 1 /* d11 independent */
+#define DOT11_BSSTYPE_ANY 2 /* d11 any BSS type */
+#define DOT11_SCANTYPE_ACTIVE 0 /* d11 scan active */
+#define DOT11_SCANTYPE_PASSIVE 1 /* d11 scan passive */
+
+/* 802.11 BRCM "Compromise" Pre N constants */
+#define PREN_PREAMBLE 24 /* green field preamble time */
+#define PREN_MM_EXT 16 /* extra mixed mode preamble time */
+#define PREN_PREAMBLE_EXT 4 /* extra preamble (multiply by unique_streams-1) */
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME 9 /* APHY slot time */
+#define APHY_SIFS_TIME 16 /* APHY SIFS time */
+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME)) /* APHY DIFS time */
+#define APHY_PREAMBLE_TIME 16 /* APHY preamble time */
+#define APHY_SIGNAL_TIME 4 /* APHY signal time */
+#define APHY_SYMBOL_TIME 4 /* APHY symbol time */
+#define APHY_SERVICE_NBITS 16 /* APHY service nbits */
+#define APHY_TAIL_NBITS 6 /* APHY tail nbits */
+#define APHY_CWMIN 15 /* APHY cwmin */
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME 20 /* BPHY slot time */
+#define BPHY_SIFS_TIME 10 /* BPHY SIFS time */
+#define BPHY_DIFS_TIME 50 /* BPHY DIFS time */
+#define BPHY_PLCP_TIME 192 /* BPHY PLCP time */
+#define BPHY_PLCP_SHORT_TIME 96 /* BPHY PLCP short time */
+#define BPHY_CWMIN 31 /* BPHY cwmin */
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION 6 /* d11 OFDM signal extension */
+
+#define PHY_CWMAX 1023 /* PHY cwmax */
+
+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+ uint32 txfrag; /* dot11TransmittedFragmentCount */
+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
+ uint32 txfail; /* dot11FailedCount */
+ uint32 txretry; /* dot11RetryCount */
+ uint32 txretrie; /* dot11MultipleRetryCount */
+ uint32 rxdup; /* dot11FrameduplicateCount */
+ uint32 txrts; /* dot11RTSSuccessCount */
+ uint32 txnocts; /* dot11RTSFailureCount */
+ uint32 txnoack; /* dot11ACKFailureCount */
+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
+ uint32 rxcrc; /* dot11FCSErrorCount */
+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */
+ uint32 rxundec; /* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI "\x00\x10\x18" /* Broadcom OUI */
+
+/* OUI for BRCM proprietary IE */
+#define BRCM_PROP_OUI "\x00\x90\x4C" /* Broadcom proprietary OUI */
+
+/* BRCM info element */
+struct brcm_ie {
+ uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */
+ uint8 len; /* IE length */
+ uint8 oui[3]; /* Proprietary OUI, BRCM_OUI */
+ uint8 ver; /* type/ver of this IE */
+ uint8 assoc; /* # of assoc STAs */
+ uint8 flags; /* misc flags */
+ uint8 flags1; /* misc flags */
+ uint16 amsdu_mtu_pref; /* preferred A-MSDU MTU */
+} PACKED;
+typedef struct brcm_ie brcm_ie_t;
+#define BRCM_IE_LEN 11 /* BRCM IE length */
+#define BRCM_IE_VER 2 /* BRCM IE version */
+#define BRCM_IE_LEGACY_AES_VER 1 /* BRCM IE legacy AES version */
+
+/* brcm_ie flags */
+#define BRF_ABCAP 0x1 /* afterburner capable */
+#define BRF_ABRQRD 0x2 /* afterburner requested */
+#define BRF_LZWDS 0x4 /* lazy wds enabled */
+#define BRF_BLOCKACK 0x8 /* BlockACK capable */
+#define BRF_ABCOUNTER_MASK 0xf0 /* afterburner wds "state" counter */
+#define BRF_ABCOUNTER_SHIFT 4 /* offset of afterburner wds "state" counter */
+
+/* brcm_ie flags1 */
+#define BRF1_AMSDU 0x1 /* A-MSDU capable */
+
+#define AB_WDS_TIMEOUT_MAX 15 /* afterburner wds Max count indicating not
+ * locally capable
+ */
+#define AB_WDS_TIMEOUT_MIN 1 /* afterburner wds, use zero count as indicating
+ * "downrev"
+ */
+
+/* EWC definitions */
+#define MCSSET_LEN 16 /* 16-bits per 8-bit set to give 128-bits bitmap of MCS Index */
+
+struct ewc_cap {
+ uint16 cap;
+ uint8 params;
+ uint8 supp_mcs[MCSSET_LEN];
+ uint16 ext_htcap;
+ uint32 txbf_cap;
+ uint8 as_cap;
+} PACKED;
+typedef struct ewc_cap ewc_cap_t;
+
+/* CAP IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the capability IE is primarily used to convey this nodes abilities */
+struct ewc_cap_ie {
+ uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */
+ uint8 len; /* IE length */
+ uint8 oui[3]; /* Proprietary OUI, BRCM_PROP_OUI */
+ uint8 type; /* type inidicates what follows */
+ ewc_cap_t cap;
+} PACKED;
+typedef struct ewc_cap_ie ewc_cap_ie_t;
+
+#define EWC_CAP_IE_LEN (26+4)
+#define EWC_CAP_IE_TYPE 51
+
+#define EWC_CAP_ADC_CODING 0x0001 /* Advance coding support */
+#define EWC_CAP_40MHZ 0x0002 /* FALSE:20Mhz, TRUE: 20 and 40MHZ supported */
+#define EWC_CAP_MIMO_PS_MASK 0x000C /* Mimo PS mask */
+#define EWC_CAP_MIMO_PS_SHIFT 0x0002 /* Mimo PS shift */
+#define EWC_CAP_MIMO_PS_OFF 0x0003 /* Mimo PS, no restriction */
+#define EWC_CAP_MIMO_PS_RTS 0x0001 /* Mimo PS, send RTS/CTS around MIMO frames */
+#define EWC_CAP_MIMO_PS_ON 0x0000 /* Mimo PS, MIMO disallowed */
+#define EWC_CAP_GF 0x0010 /* Greenfield preamble support */
+#define EWC_CAP_SHORT_GI_20 0x0020 /* 20MHZ short guard interval support */
+#define EWC_CAP_SHORT_GI_40 0x0040 /* 40Mhz short guard interval support */
+#define EWC_CAP_TX_STBC 0x0080 /* Tx STBC support */
+#define EWC_CAP_RX_STBC_MASK 0x0300 /* Rx STBC mask */
+#define EWC_CAP_RX_STBC_SHIFT 8 /* Rx STBC shift */
+#define EWC_CAP_DELAYED_BA 0x0400 /* delayed BA support */
+#define EWC_CAP_MAX_AMSDU 0x0800 /* Max AMSDU size in bytes , 0=3839, 1=7935 */
+#define EWC_CAP_DSSS_CCK 0x1000 /* DSSS/CCK supported by the BSS */
+#define EWC_CAP_PSMP 0x2000 /* Power Save Multi Poll support */
+#define EWC_CAP_STBC_CTL 0x4000 /* STBC control frame support */
+#define EWC_CAP_LSIG_TXOP 0x8000 /* L-SIG TXOP protection support */
+
+#define EWC_MAX_AMSDU 7935 /* max amsdu size (bytes) per the EWC spec */
+#define EWC_MIN_AMSDU 3835 /* min amsdu size (bytes) per the EWC spec */
+
+#define EWC_PARAMS_RX_FACTOR_MASK 0x03 /* ampdu rcv factor mask */
+#define EWC_PARAMS_DENSITY_MASK 0x1C /* ampdu density mask */
+#define EWC_PARAMS_DENSITY_SHIFT 2 /* ampdu density shift */
+
+/* EWC/AMPDU specific define */
+#define AMPDU_MAX_MPDU_DENSITY 7 /* max mpdu density; in 1/8 usec units */
+#define AMPDU_MAX_RX_FACTOR 3 /* max rcv ampdu len (64kb) */
+#define AMPDU_RX_FACTOR_BASE 8*1024 /* ampdu factor base for rx len */
+#define AMPDU_DELIMITER_LEN 4 /* length of ampdu delimiter */
+
+struct ewc_add {
+ uint8 ctl_ch; /* control channel number */
+ uint8 byte1; /* ext ch,rec. ch. width, RIFS support */
+ uint16 opmode; /* operation mode */
+ uint16 misc_bits; /* misc bits */
+ uint8 basic_mcs[MCSSET_LEN]; /* required MCS set */
+} PACKED;
+typedef struct ewc_add ewc_add_t;
+
+/* ADD IE: EWC 1.0 spec. simply stole a 802.11 IE, we use our prop. IE until this is resolved */
+/* the additional IE is primarily used to convey the current BSS configuration */
+struct ewc_add_ie {
+ uint8 id; /* IE ID, 221, DOT11_MNG_PROPR_ID */
+ uint8 len; /* IE length */
+ uint8 oui[3]; /* Proprietary OUI, BRCM_PROP_OUI */
+ uint8 type; /* indicates what follows */
+ ewc_add_t add;
+} PACKED;
+typedef struct ewc_add_ie ewc_add_ie_t;
+
+#define EWC_ADD_IE_LEN (22+4)
+#define EWC_ADD_IE_TYPE 52
+
+/* byte1 defn's */
+#define EWC_EXT_CH_MASK 0x03 /* extension channel mask */
+#define EWC_EXT_CH_UPPER 0x01 /* ext. ch. on upper sb */
+#define EWC_EXT_CH_LOWER 0x03 /* ext. ch. on lower sb */
+#define EWC_EXT_CH_NONE 0x00 /* extension channel mask */
+#define EWC_BW_ANY 0x04 /* set, STA can use 20 or 40MHz */
+#define EWC_RIFS_PERMITTED 0x08 /* RIFS allowed */
+
+/* opmode defn's */
+#define EWC_OPMODE_MASK 0x0003 /* protection mode mask */
+#define EWC_OPMODE_PURE 0x0000 /* protection mode PURE */
+#define EWC_OPMODE_HT20IN40 0x0002 /* protection mode 20MHz HT in 40MHz BSS */
+#define EWC_OPMODE_MIXED 0x0003 /* protection mode Mixed Mode */
+#define EWC_NONGF_PRESENT 0x0004 /* protection mode non-GF */
+
+/* misc_bites defn's */
+#define EWC_BASIC_STBC_MCS 0x007f /* basic STBC MCS */
+#define EWC_DUAL_STBC_PROT 0x0080 /* Dual STBC Protection */
+#define EWC_SECOND_BCN 0x0100 /* Secondary beacon support */
+#define EWC_LSIG_TXOP 0x0200 /* L-SIG TXOP Protection full support */
+#define EWC_PCO_ACTIVE 0x0400 /* PCO active */
+#define EWC_PCO_PHASE 0x0800 /* PCO phase */
+
+/* Macros for opmode */
+#define EWC_MIXEDMODE_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
+ == EWC_OPMODE_MIXED) /* mixed mode present */
+#define EWC_HT20_PRESENT(add) ((ltoh16_ua(&add.opmode) & EWC_OPMODE_MASK) \
+ == EWC_OPMODE_HT20IN40) /* 20MHz HT present */
+#define EWC_USE_PROTECTION(add) (EWC_HT20_PRESENT((add)) || \
+ EWC_MIXEDMODE_PRESENT((add))) /* use protection */
+
+/* Vendor IE structure */
+struct vndr_ie {
+ uchar id;
+ uchar len;
+ uchar oui [3];
+ uchar data [1]; /* Variable size data */
+}PACKED;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN 2 /* id + len field */
+#define VNDR_IE_MIN_LEN 3 /* size of the oui field */
+#define VNDR_IE_MAX_LEN 256 /* verdor IE max length */
+
+/* WPA definitions */
+#define WPA_VERSION 1 /* WPA version */
+#define WPA_OUI "\x00\x50\xF2" /* WPA OUI */
+
+#define WPA2_VERSION 1 /* WPA2 version */
+#define WPA2_VERSION_LEN 2 /* WAP2 version length */
+#define WPA2_OUI "\x00\x0F\xAC" /* WPA2 OUI */
+
+#define WPA_OUI_LEN 3 /* WPA OUI length */
+
+/* RSN authenticated key managment suite */
+#define RSN_AKM_NONE 0 /* None (IBSS) */
+#define RSN_AKM_UNSPECIFIED 1 /* Over 802.1x */
+#define RSN_AKM_PSK 2 /* Pre-shared Key */
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */
+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */
+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */
+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */
+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX TKIP_MIC_AUTH_TX /* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX TKIP_MIC_AUTH_RX /* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE 16 /* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
--- /dev/null
+/*
+ * Broadcom Ethernettype protocol definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: bcmeth.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
+ */
+
+/*
+ * Broadcom Ethernet protocol defines
+ */
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#pragma pack(1)
+#define PACKED
+#endif
+
+/* ETHER_TYPE_BRCM is defined in ethernet.h */
+
+/*
+ * Following the 2byte BRCM ether_type is a 16bit BRCM subtype field
+ * in one of two formats: (only subtypes 32768-65535 are in use now)
+ *
+ * subtypes 0-32767:
+ * 8 bit subtype (0-127)
+ * 8 bit length in bytes (0-255)
+ *
+ * subtypes 32768-65535:
+ * 16 bit big-endian subtype
+ * 16 bit big-endian length in bytes (0-65535)
+ *
+ * length is the number of additional bytes beyond the 4 or 6 byte header
+ *
+ * Reserved values:
+ * 0 reserved
+ * 5-15 reserved for iLine protocol assignments
+ * 17-126 reserved, assignable
+ * 127 reserved
+ * 32768 reserved
+ * 32769-65534 reserved, assignable
+ * 65535 reserved
+ */
+
+/*
+ * While adding the subtypes and their specific processing code make sure
+ * bcmeth_bcm_hdr_t is the first data structure in the user specific data structure definition
+ */
+
+#define BCMILCP_SUBTYPE_RATE 1
+#define BCMILCP_SUBTYPE_LINK 2
+#define BCMILCP_SUBTYPE_CSA 3
+#define BCMILCP_SUBTYPE_LARQ 4
+#define BCMILCP_SUBTYPE_VENDOR 5
+#define BCMILCP_SUBTYPE_FLH 17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG 32769
+#define BCMILCP_SUBTYPE_CERT 32770
+#define BCMILCP_SUBTYPE_SES 32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED 0
+#define BCMILCP_BCM_SUBTYPE_EVENT 1
+#define BCMILCP_BCM_SUBTYPE_SES 2
+/*
+ * The EAPOL type is not used anymore. Instead EAPOL messages are now embedded
+ * within BCMILCP_BCM_SUBTYPE_EVENT type messages
+ */
+/* #define BCMILCP_BCM_SUBTYPE_EAPOL 3 */
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0
+
+/* These fields are stored in network order */
+typedef struct bcmeth_hdr
+{
+ uint16 subtype; /* Vendor specific..32769 */
+ uint16 length;
+ uint8 version; /* Version is 0 */
+ uint8 oui[3]; /* Broadcom OUI */
+ /* user specific Data */
+ uint16 usr_subtype;
+} PACKED bcmeth_hdr_t;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _BCMETH_H_ */
--- /dev/null
+/*
+ * Broadcom Event protocol definitions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ * $Id: bcmevent.h,v 1.1.1.3 2006/02/27 03:43:16 honor Exp $
+ *
+ */
+
+/*
+ * Broadcom Ethernet Events protocol defines
+ *
+ */
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#pragma pack(1)
+#define PACKED
+#endif /* defined(__GNUC__) */
+
+#define BCM_EVENT_MSG_VERSION 1 /* wl_event_msg_t struct version */
+#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */
+
+/* flags */
+#define WLC_EVENT_MSG_LINK 0x01 /* link is up */
+#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */
+#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */
+
+/* theses fields are stored in network order */
+typedef struct
+{
+ uint16 version;
+ uint16 flags; /* see flags below */
+ uint32 event_type; /* Message (see below) */
+ uint32 status; /* Status code (see below) */
+ uint32 reason; /* Reason code (if applicable) */
+ uint32 auth_type; /* WLC_E_AUTH */
+ uint32 datalen; /* data buf */
+ struct ether_addr addr; /* Station address (if applicable) */
+ char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */
+} PACKED wl_event_msg_t;
+
+/* used by driver msgs */
+typedef struct bcm_event {
+ struct ether_header eth;
+ bcmeth_hdr_t bcm_hdr;
+ wl_event_msg_t event;
+ /* data portion follows */
+} PACKED bcm_event_t;
+
+#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+/* Event messages */
+#define WLC_E_SET_SSID 0 /* indicates status of set SSID */
+#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */
+#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */
+#define WLC_E_AUTH 3 /* 802.11 AUTH request */
+#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */
+#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */
+#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */
+#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */
+#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */
+#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */
+#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */
+#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */
+#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */
+#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */
+#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */
+#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */
+#define WLC_E_LINK 16 /* generic link indication */
+#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */
+#define WLC_E_ROAM 19 /* roam attempt occurred: indicate status & reason */
+#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */
+#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */
+#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */
+#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */
+#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */
+#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */
+#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */
+#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */
+#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */
+#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */
+#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */
+#define WLC_E_LAST 31 /* highest val + 1 for range checking */
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */
+#define WLC_E_STATUS_FAIL 1 /* operation failed */
+#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */
+#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */
+#define WLC_E_STATUS_ABORT 4 /* operation was aborted */
+#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */
+#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */
+#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */
+
+/* roam reason codes */
+#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */
+#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */
+#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */
+#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */
+#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */
+#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */
+#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */
+#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */
+#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */
+
+/* prune reason codes */
+#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* ecryption mismatch */
+#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */
+#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */
+#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */
+#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */
+#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */
+#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */
+#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */
+#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */
+#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */
+#define WLC_E_PRUNE_CCXFAST_PREVAP 11 /* CCX FAST ROAM: prune previous AP */
+#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */
+#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */
+#define WLC_E_PRUNE_CCXFAST_DROAM 14 /* CCX FAST ROAM: prune unqulified AP */
+#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */
+#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */
+#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */
+
+/* WLC_SET_CALLBACK data type */
+typedef struct wlc_event_cb {
+ void (*fn)(void *, bcm_event_t *); /* Callback function */
+ void *context; /* Passed to callback function */
+} wlc_event_cb_t;
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif /* PACKED */
+
+#endif /* _BCMEVENT_H_ */
--- /dev/null
+/*
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: ethernet.h,v 1.1.1.14 2006/02/27 03:43:16 honor Exp $
+ */
+
+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#pragma pack(1)
+#define PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define ETHER_ADDR_LEN 6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define ETHER_TYPE_LEN 2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define ETHER_CRC_LEN 4
+
+/*
+ * The length of the combined header.
+ */
+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define ETHER_MIN_LEN 64
+
+/*
+ * The minimum packet user data length.
+ */
+#define ETHER_MIN_DATA 46
+
+/*
+ * The maximum packet length.
+ */
+#define ETHER_MAX_LEN 1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define ETHER_MAX_DATA 1500
+
+/* ether types */
+#define ETHER_TYPE_IP 0x0800 /* IP */
+#define ETHER_TYPE_ARP 0x0806 /* ARP */
+#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */
+#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */
+#define ETHER_TYPE_802_1X 0x888e /* 802.1x */
+#ifdef BCMWPA2
+#define ETHER_TYPE_802_1X_PREAUTH 0x88c7 /* 802.1x preauthentication */
+#endif
+
+/* Broadcom subtype follows ethertype; First 2 bytes are reserved; Next 2 are subtype; */
+#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4 byte subtype */
+#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */
+
+/* ether header */
+#define ETHER_DEST_OFFSET 0 /* dest address offset */
+#define ETHER_SRC_OFFSET 6 /* src address offset */
+#define ETHER_TYPE_OFFSET 12 /* ether type offset */
+
+/*
+ * A macro to validate a length with
+ */
+#define ETHER_IS_VALID_LEN(foo) \
+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct ether_header {
+ uint8 ether_dhost[ETHER_ADDR_LEN];
+ uint8 ether_shost[ETHER_ADDR_LEN];
+ uint16 ether_type;
+} PACKED;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct ether_addr {
+ uint8 octet[ETHER_ADDR_LEN];
+} PACKED;
+#endif /* !__INCif_etherh Quick and ugly hack for VxWorks */
+
+/*
+ * Takes a pointer, sets locally admininistered
+ * address bit in the 48-bit Ethernet address.
+ */
+#define ETHER_SET_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
+
+/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
+#define ether_cmp(a, b) (!(((short*)a)[0] == ((short*)b)[0]) | \
+ !(((short*)a)[1] == ((short*)b)[1]) | \
+ !(((short*)a)[2] == ((short*)b)[2]))
+
+/* copy an ethernet address - assumes the pointers can be referenced as shorts */
+#define ether_copy(s, d) { \
+ ((short*)d)[0] = ((short*)s)[0]; \
+ ((short*)d)[1] = ((short*)s)[1]; \
+ ((short*)d)[2] = ((short*)s)[2]; }
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
+ ((uint8 *)(ea))[1] & \
+ ((uint8 *)(ea))[2] & \
+ ((uint8 *)(ea))[3] & \
+ ((uint8 *)(ea))[4] & \
+ ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
+ ((uint8 *)(ea))[1] | \
+ ((uint8 *)(ea))[2] | \
+ ((uint8 *)(ea))[3] | \
+ ((uint8 *)(ea))[4] | \
+ ((uint8 *)(ea))[5]) == 0)
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _NET_ETHERNET_H_ */
--- /dev/null
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wpa.h,v 1.1.1.4 2006/02/27 03:43:16 honor Exp $
+ */
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+/* enable structure packing */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#pragma pack(1)
+#define PACKED
+#endif
+
+/* Reason Codes */
+
+/* 10 and 11 are from TGh. */
+#define DOT11_RC_BAD_PC 10 /* Unacceptable power capability element */
+#define DOT11_RC_BAD_CHANNELS 11 /* Unacceptable supported channels element */
+/* 12 is unused */
+/* 13 through 23 taken from P802.11i/D3.0, November 2002 */
+#define DOT11_RC_INVALID_WPA_IE 13 /* Invalid info. element */
+#define DOT11_RC_MIC_FAILURE 14 /* Michael failure */
+#define DOT11_RC_4WH_TIMEOUT 15 /* 4-way handshake timeout */
+#define DOT11_RC_GTK_UPDATE_TIMEOUT 16 /* Group key update timeout */
+#define DOT11_RC_WPA_IE_MISMATCH 17 /* WPA IE in 4-way handshake differs from
+ * (re-)assoc. request/probe response
+ */
+#define DOT11_RC_INVALID_MC_CIPHER 18 /* Invalid multicast cipher */
+#define DOT11_RC_INVALID_UC_CIPHER 19 /* Invalid unicast cipher */
+#define DOT11_RC_INVALID_AKMP 20 /* Invalid authenticated key management protocol */
+#define DOT11_RC_BAD_WPA_VERSION 21 /* Unsupported WPA version */
+#define DOT11_RC_INVALID_WPA_CAP 22 /* Invalid WPA IE capabilities */
+#define DOT11_RC_8021X_AUTH_FAIL 23 /* 802.1X authentication failure */
+
+#define WPA2_PMKID_LEN 16
+
+/* WPA IE fixed portion */
+typedef struct
+{
+ uint8 tag; /* TAG */
+ uint8 length; /* TAG length */
+ uint8 oui[3]; /* IE OUI */
+ uint8 oui_type; /* OUI type */
+ struct {
+ uint8 low;
+ uint8 high;
+ } PACKED version; /* IE version */
+} PACKED wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN 4
+#define WPA_IE_FIXED_LEN 8
+#define WPA_IE_TAG_FIXED_LEN 6
+
+#ifdef BCMWPA2
+typedef struct {
+ uint8 tag; /* TAG */
+ uint8 length; /* TAG length */
+ struct {
+ uint8 low;
+ uint8 high;
+ } PACKED version; /* IE version */
+} PACKED wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN 4
+#define WPA_RSN_IE_TAG_FIXED_LEN 2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+#endif
+
+/* WPA suite/multicast suite */
+typedef struct
+{
+ uint8 oui[3];
+ uint8 type;
+} PACKED wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN 4
+
+/* WPA unicast suite list/key management suite list */
+typedef struct
+{
+ struct {
+ uint8 low;
+ uint8 high;
+ } PACKED count;
+ wpa_suite_t list[1];
+} PACKED wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN 2
+#ifdef BCMWPA2
+typedef struct
+{
+ struct {
+ uint8 low;
+ uint8 high;
+ } PACKED count;
+ wpa_pmkid_t list[1];
+} PACKED wpa_pmkid_list_t;
+#endif
+
+/* WPA cipher suites */
+#define WPA_CIPHER_NONE 0 /* None */
+#define WPA_CIPHER_WEP_40 1 /* WEP (40-bit) */
+#define WPA_CIPHER_TKIP 2 /* TKIP: default for WPA */
+#define WPA_CIPHER_AES_OCB 3 /* AES (OCB) */
+#define WPA_CIPHER_AES_CCM 4 /* AES (CCM) */
+#define WPA_CIPHER_WEP_104 5 /* WEP (104-bit) */
+
+#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \
+ (cipher) == WPA_CIPHER_WEP_40 || \
+ (cipher) == WPA_CIPHER_WEP_104 || \
+ (cipher) == WPA_CIPHER_TKIP || \
+ (cipher) == WPA_CIPHER_AES_OCB || \
+ (cipher) == WPA_CIPHER_AES_CCM)
+
+/* WPA TKIP countermeasures parameters */
+#define WPA_TKIP_CM_DETECT 60 /* multiple MIC failure window (seconds) */
+#define WPA_TKIP_CM_BLOCK 60 /* countermeasures active window (seconds) */
+
+/* WPA capabilities defined in 802.11i */
+#define WPA_CAP_4_REPLAY_CNTRS 2
+#define WPA_CAP_16_REPLAY_CNTRS 3
+#define WPA_CAP_REPLAY_CNTR_SHIFT 2
+#define WPA_CAP_REPLAY_CNTR_MASK 0x000c
+
+/* WPA Specific defines */
+#define WPA_CAP_LEN 2 /* Length of RSN capabilities in RSN IE (2 octets) */
+
+#ifdef BCMWPA2
+#define WPA_CAP_WPA2_PREAUTH 1
+#endif /* BCMWPA2 */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _proto_wpa_h_ */
--- /dev/null
+/*
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id: typedefs.h,v 1.1.1.12 2006/04/08 06:13:40 honor Exp $
+ */
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+/*
+ * Inferred Typedefs
+ *
+ */
+
+/* Infer the compile environment based on preprocessor symbols and pramas.
+ * Override type definitions as needed, and include configuration dependent
+ * header files to define types.
+ */
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE false
+#endif
+#ifndef TRUE
+#define TRUE true
+#endif
+
+#endif /* __cplusplus */
+
+#if defined(_NEED_SIZE_T_)
+typedef long unsigned int size_t;
+#endif
+
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+
+
+/* Do not support the (u)int64 types with strict ansi for GNU C */
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+/* pick up ushort & uint from standard types.h */
+#if defined(linux) && defined(__KERNEL__)
+#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */
+#else
+#include <sys/types.h>
+#endif
+
+/* use the default typedefs in the next section of this file */
+#define USE_TYPEDEF_DEFAULTS
+
+/*
+ * Default Typedefs
+ *
+ */
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef /* @abstract@ */ unsigned char bool;
+#endif
+
+/* define uchar, ushort, uint, ulong */
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long ulong;
+#endif
+
+/* define [u]int8/16/32/64, uintptr */
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_UINTPTR
+typedef unsigned int uintptr;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short int16;
+#endif
+
+#ifndef TYPEDEF_INT32
+typedef signed int int32;
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+/* define float32/64, float_t */
+
+#ifndef TYPEDEF_FLOAT32
+typedef float float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double float64;
+#endif
+
+/*
+ * abstracted floating point type allows for compile time selection of
+ * single or double precision arithmetic. Compiling with -DFLOAT32
+ * selects single precision; the default is double precision.
+ */
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else /* default to double precision floating point */
+typedef float64 float_t;
+#endif
+
+#endif /* TYPEDEF_FLOAT_T */
+
+/* define macro values */
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef TRUE
+#define TRUE 1 /* TRUE */
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifndef OFF
+#define OFF 0
+#endif
+
+#ifndef ON
+#define ON 1 /* ON = 1 */
+#endif
+
+#define AUTO (-1) /* Auto = -1 */
+
+/* define PTRSZ, INLINE */
+
+#ifndef PTRSZ
+#define PTRSZ sizeof(char*)
+#endif
+
+#ifndef INLINE
+
+#ifdef _MSC_VER
+
+#define INLINE __inline
+
+#elif __GNUC__
+
+#define INLINE __inline__
+
+#else
+
+#define INLINE
+
+#endif /* _MSC_VER */
+
+#endif /* INLINE */
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_UINTPTR
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+/*
+ * Including the bcmdefs.h here, to make sure everyone including typedefs.h
+ * gets this automatically
+*/
+#include <bcmdefs.h>
+
+#endif /* _TYPEDEFS_H_ */
--- /dev/null
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wlioctl.h,v 1.1.1.22 2006/04/15 01:29:08 michael Exp $
+ */
+
+#ifndef _wlioctl_h_
+#define _wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/bcmeth.h>
+#include <proto/bcmevent.h>
+#include <proto/802.11.h>
+
+#ifdef __NetBSD__
+/* NetBSD 2.0 does not have SIOCDEVPRIVATE. This is NetBSD 2.0 specific */
+#define SIOCDEVPRIVATE _IOWR('i', 139, struct ifreq)
+#endif
+
+/* require default structure packing */
+#if !defined(__GNUC__)
+#pragma pack(push, 8)
+#endif
+
+/* A chanspec holds the channel number, band, bandwidth and control sideband */
+typedef uint16 chanspec_t;
+#define WL_CHANSPEC_CHAN_MASK 0x00ff
+
+#define WL_CHANSPEC_CTL_SB_MASK 0x0300
+#define WL_CHANSPEC_CTL_SB_SHIFT 8
+#define WL_CHANSPEC_CTL_SB_LOWER 0x0100
+#define WL_CHANSPEC_CTL_SB_UPPER 0x0200
+#define WL_CHANSPEC_CTL_SB_NONE 0x0300
+
+#define WL_CHANSPEC_BW_MASK 0x0C00
+#define WL_CHANSPEC_BW_SHIFT 10
+#define WL_CHANSPEC_BW_10 0x0400
+#define WL_CHANSPEC_BW_20 0x0800
+#define WL_CHANSPEC_BW_40 0x0C00
+
+#define WL_CHANSPEC_BAND_MASK 0xf000
+#define WL_CHANSPEC_BAND_SHIFT 12
+#define WL_CHANSPEC_BAND_5G 0x1000
+#define WL_CHANSPEC_BAND_2G 0x2000
+#define INVCHANSPEC 255
+
+/* Legacy structure to help keep backward compatible wl tool and tray app */
+
+#define LEGACY_WL_BSS_INFO_VERSION 107 /* older version of wl_bss_info struct */
+
+typedef struct wl_bss_info_107 {
+ uint32 version; /* version field */
+ uint32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ struct ether_addr BSSID;
+ uint16 beacon_period; /* units are Kusec */
+ uint16 capability; /* Capability information */
+ uint8 SSID_len;
+ uint8 SSID[32];
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ uint8 channel; /* Channel no. */
+ uint16 atim_window; /* units are Kusec */
+ uint8 dtim_period; /* DTIM period */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ int8 phy_noise; /* noise (in dBm) */
+ uint32 ie_length; /* byte length of Information Elements */
+ /* variable length Information Elements */
+} wl_bss_info_107_t;
+
+/*
+ * Per-bss information structure.
+ */
+
+#define WL_BSS_INFO_VERSION 108 /* current version of wl_bss_info struct */
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in wl_scan_results_t)
+ */
+typedef struct wl_bss_info {
+ uint32 version; /* version field */
+ uint32 length; /* byte length of data in this record,
+ * starting at version and including IEs
+ */
+ struct ether_addr BSSID;
+ uint16 beacon_period; /* units are Kusec */
+ uint16 capability; /* Capability information */
+ uint8 SSID_len;
+ uint8 SSID[32];
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ chanspec_t chanspec; /* chanspec for bss */
+ uint16 atim_window; /* units are Kusec */
+ uint8 dtim_period; /* DTIM period */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ int8 phy_noise; /* noise (in dBm) */
+
+ bool n_cap; /* BSS is 802.11N Capable */
+ uint32 nbss_cap; /* 802.11N BSS Capabilities (based on EWC_CAP_*) */
+ uint8 ctl_ch; /* 802.11N BSS control channel number */
+ uint32 reserved[2]; /* Reserved for expansion of BSS properties */
+ uint8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
+
+ uint16 ie_offset; /* offset at which IEs start, from beginning */
+ uint32 ie_length; /* byte length of Information Elements */
+ /* Add new fields here */
+ /* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+ uint32 SSID_len;
+ uchar SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+ wlc_ssid_t ssid; /* default: {0, ""} */
+ struct ether_addr bssid; /* default: bcast */
+ int8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+ int32 nprobes; /* -1 use default, number of probes per channel */
+ int32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ int32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ int32 home_time; /* -1 use default, dwell time for the home channel
+ * between channel scans
+ */
+ int32 channel_num; /* 0 use default (all available channels), count of
+ * channels in channel_list
+ */
+ uint16 channel_list[1]; /* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+ uint32 buflen;
+ uint32 version;
+ uint32 count;
+ wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+
+#define WL_NUMRATES 255 /* max # of rates in a rateset */
+typedef struct wl_rateset {
+ uint32 count; /* # rates in this set */
+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+ /* in - # of elements, out - # of entries */
+ uint32 count;
+ /* variable length uint32 list */
+ uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
+
+/* defines used by the nrate iovar */
+#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
+#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */
+#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
+#define NRATE_STF_SHIFT 8 /* stf mode shift */
+
+#define ANTENNA_NUM_1 1 /* total number of antennas to be used */
+#define ANTENNA_NUM_2 2
+#define ANTENNA_NUM_3 3
+#define ANTENNA_NUM_4 4
+
+typedef struct wl_channels_in_country {
+ uint32 buflen;
+ uint32 band;
+ char country_abbrev[WLC_CNTRY_BUF_SZ];
+ uint32 count;
+ uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+ uint32 buflen;
+ uint32 band_set;
+ uint32 band;
+ uint32 count;
+ char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC 1
+#define WL_RM_TYPE_CCA 2
+#define WL_RM_TYPE_RPI 3
+
+#define WL_RM_FLAG_PARALLEL (1<<0)
+
+#define WL_RM_FLAG_LATE (1<<1)
+#define WL_RM_FLAG_INCAPABLE (1<<2)
+#define WL_RM_FLAG_REFUSED (1<<3)
+
+typedef struct wl_rm_req_elt {
+ int8 type;
+ int8 flags;
+ chanspec_t chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+ uint32 token; /* overall measurement set token */
+ uint32 count; /* number of measurement requests */
+ wl_rm_req_elt_t req[1]; /* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN 8
+
+typedef struct wl_rm_rep_elt {
+ int8 type;
+ int8 flags;
+ chanspec_t chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+ uint32 len; /* byte length of data block */
+ uint8 data[1]; /* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+ uint8 rpi[WL_RPI_REP_BIN_NUM];
+ int8 rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+ uint32 token; /* overall measurement set token */
+ uint32 len; /* length of measurement report block */
+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN 8
+
+
+#if defined(BCMSUP_PSK)
+typedef enum sup_auth_status {
+ WLC_SUP_DISCONNECTED = 0,
+ WLC_SUP_CONNECTING,
+ WLC_SUP_IDREQUIRED,
+ WLC_SUP_AUTHENTICATING,
+ WLC_SUP_AUTHENTICATED,
+ WLC_SUP_KEYXCHANGE,
+ WLC_SUP_KEYED,
+ WLC_SUP_TIMEOUT
+} sup_auth_status_t;
+#endif /* BCMCCX | BCMSUP_PSK */
+
+/* Enumerate crypto algorithms */
+#define CRYPTO_ALGO_OFF 0
+#define CRYPTO_ALGO_WEP1 1
+#define CRYPTO_ALGO_TKIP 2
+#define CRYPTO_ALGO_WEP128 3
+#define CRYPTO_ALGO_AES_CCM 4
+#define CRYPTO_ALGO_AES_OCB_MSDU 5
+#define CRYPTO_ALGO_AES_OCB_MPDU 6
+#define CRYPTO_ALGO_NALG 7
+
+#define WSEC_GEN_MIC_ERROR 0x0001
+#define WSEC_GEN_REPLAY 0x0002
+
+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
+
+typedef struct wl_wsec_key {
+ uint32 index; /* key index */
+ uint32 len; /* key length */
+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
+ uint32 pad_1[18];
+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ uint32 flags; /* misc flags */
+ uint32 pad_2[2];
+ int pad_3;
+ int iv_initialized; /* has IV been initialized already? */
+ int pad_4;
+ /* Rx IV */
+ struct {
+ uint32 hi; /* upper 32 bits of IV */
+ uint16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ uint32 pad_5[2];
+ struct ether_addr ea; /* per station */
+} wl_wsec_key_t;
+
+#define WSEC_MIN_PSK_LEN 8
+#define WSEC_MAX_PSK_LEN 64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE (1<<0)
+
+/* receptacle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+ ushort key_len; /* octets in key material */
+ ushort flags; /* key handling qualification */
+ uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED 0x0001
+#define TKIP_ENABLED 0x0002
+#define AES_ENABLED 0x0004
+#define WSEC_SWFLAG 0x0008
+#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
+#define FIPS_ENABLED 0x0080
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
+#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
+/* #define WPA_AUTH_8021X 0x0020 */ /* 802.1x, reserved */
+#ifdef BCMWPA2
+#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
+#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
+#endif /* BCMWPA2 */
+
+#ifdef BCMWPA2
+/* pmkid */
+#define MAXPMKID 16
+
+typedef struct _pmkid
+{
+ struct ether_addr BSSID;
+ uint8 PMKID[WPA2_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list
+{
+ uint32 npmkid;
+ pmkid_t pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+ struct ether_addr BSSID;
+ uint8 preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+ uint32 npmkid_cand;
+ pmkid_cand_t pmkid_cand[1];
+} pmkid_cand_list_t;
+#endif /* BCMWPA2 */
+
+typedef struct wl_led_info {
+ uint32 index; /* led index */
+ uint32 behavior;
+ bool activehi;
+} wl_led_info_t;
+
+typedef struct wlc_assoc_info {
+ uint32 req_len;
+ uint32 resp_len;
+ uint32 flags;
+ struct dot11_assoc_req req;
+ struct ether_addr reassoc_bssid; /* used in reassoc's */
+ struct dot11_assoc_resp resp;
+} wl_assoc_info_t;
+/* flags */
+#define WLC_ASSOC_REQ_IS_REASSOC 0x01 /* assoc req was actually a reassoc */
+/* srom read/write struct passed through ioctl */
+typedef struct {
+ uint byteoff; /* byte offset */
+ uint nbytes; /* number of bytes */
+ uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+ uint32 byteoff; /* byte offset of the field in d11regs_t */
+ uint32 val; /* read/write value of the field */
+ uint32 size; /* sizeof the field */
+ uint band; /* band (optional) */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */
+/* PCL - Power Control Loop */
+/* current gain setting is replaced by user input */
+#define WL_ATTEN_APP_INPUT_PCL_OFF 0 /* turn off PCL, apply supplied input */
+#define WL_ATTEN_PCL_ON 1 /* turn on PCL */
+/* current gain setting is maintained */
+#define WL_ATTEN_PCL_OFF 2 /* turn off PCL. */
+typedef struct {
+ uint16 auto_ctrl; /* WL_ATTEN_XX */
+ uint16 bb; /* Baseband attenuation */
+ uint16 radio; /* Radio attenuation */
+ uint16 txctl1; /* Radio TX_CTL1 value */
+} atten_t;
+
+/* defines used by poweridx iovar - it controls power in a-band */
+/* current gain setting is maintained */
+#define WL_PWRIDX_PCL_OFF -2 /* turn off PCL. */
+#define WL_PWRIDX_PCL_ON -1 /* turn on PCL */
+#define WL_PWRIDX_LOWER_LIMIT -2 /* lower limit */
+#define WL_PWRIDX_UPPER_LIMIT 63 /* upper limit */
+/* value >= 0 causes
+ * - input to be set to that value
+ * - PCL to be off
+ */
+
+/* Used to get specific STA parameters */
+typedef struct {
+ uint32 val;
+ struct ether_addr ea;
+} scb_val_t;
+
+
+/* Event data type */
+typedef struct wlc_event {
+ wl_event_msg_t event; /* encapsulated event */
+ struct ether_addr *addr; /* used to keep a trace of the potential present of
+ * an address in wlc_event_msg_t
+ */
+ void *data; /* used to hang additional data on an event */
+ struct wlc_event *next; /* enables ordered list of pending events */
+} wlc_event_t;
+
+#define BCM_MAC_STATUS_INDICATION (0x40010200L)
+
+/* Please update the following when modifying this structure:
+ * StaInfo Twiki page flags section - description of the sta_info_t struct
+ * src/wl/exe/wlu.c - print of sta_info_t
+ * Pay attention to version if structure changes.
+ */
+typedef struct {
+ uint16 ver; /* version of this struct */
+ uint16 len; /* length in bytes of this structure */
+ uint16 cap; /* sta's advertised capabilities */
+ uint32 flags; /* flags defined below */
+ uint32 idle; /* time since data pkt rx'd from sta */
+ struct ether_addr ea; /* Station address */
+ wl_rateset_t rateset; /* rateset in use */
+ uint32 in; /* seconds elapsed since associated */
+ uint32 listen_interval_inms; /* Min Listen interval in ms for this STA */
+} sta_info_t;
+
+#define WL_STA_VER 2
+
+/* Flags for sta_info_t indicating properties of STA */
+#define WL_STA_BRCM 0x1 /* Running a Broadcom driver */
+#define WL_STA_WME 0x2 /* WMM association */
+#define WL_STA_ABCAP 0x4 /* Afterburner-capable */
+#define WL_STA_AUTHE 0x8 /* Authenticated */
+#define WL_STA_ASSOC 0x10 /* Associated */
+#define WL_STA_AUTHO 0x20 /* Authorized */
+#define WL_STA_WDS 0x40 /* Wireless Distribution System */
+#define WL_STA_WDS_LINKUP 0x80 /* WDS traffic/probes flowing properly */
+#define WL_STA_PS 0x100 /* STA is in power save mode from AP's viewpoint */
+#define WL_STA_APSD_BE 0x200 /* APSD delv/trigger for AC_BE is default enabled */
+#define WL_STA_APSD_BK 0x400 /* APSD delv/trigger for AC_BK is default enabled */
+#define WL_STA_APSD_VI 0x800 /* APSD delv/trigger for AC_VI is default enabled */
+#define WL_STA_APSD_VO 0x1000 /* APSD delv/trigger for AC_VO is default enabled */
+#define WL_STA_N_CAP 0x2000 /* STA 802.11n capable */
+
+#define WL_WDS_LINKUP WL_STA_WDS_LINKUP /* deprecated */
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+ WLC_WW = 0, /* Worldwide */
+ WLC_THA, /* Thailand */
+ WLC_ISR, /* Israel */
+ WLC_JDN, /* Jordan */
+ WLC_PRC, /* China */
+ WLC_JPN, /* Japan */
+ WLC_FCC, /* USA */
+ WLC_EUR, /* Europe */
+ WLC_USL, /* US Low Band only */
+ WLC_JPH, /* Japan High Band only */
+ WLC_ALL, /* All the channels in this band */
+ WLC_11D, /* Represents locale received by 11d beacons */
+ WLC_LAST_LOCALE,
+ WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+ int hw_channel;
+ int target_channel;
+ int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+ uint count; /* number of MAC addresses */
+ struct ether_addr ea[1]; /* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+ uint rx_good_pkt;
+ uint rx_bad_pkt;
+ uint tx_good_pkt;
+ uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ bool set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+ uint vendorid; /* PCI vendor id */
+ uint deviceid; /* device id of chip */
+ uint radiorev; /* radio revision */
+ uint chiprev; /* chip revision */
+ uint corerev; /* core revision */
+ uint boardid; /* board identifier (usu. PCI sub-device id) */
+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
+ uint boardrev; /* board revision */
+ uint driverrev; /* driver version */
+ uint ucoderev; /* microcode version */
+ uint bus; /* bus type */
+ uint chipnum; /* chip number */
+} wlc_rev_info_t;
+
+#define WL_BRAND_MAX 10
+typedef struct wl_instance_info {
+ uint instance;
+ char brand[WL_BRAND_MAX];
+} wl_instance_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC 0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION 1
+
+#define WLC_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */
+#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC 0
+#define WLC_GET_VERSION 1
+#define WLC_UP 2
+#define WLC_DOWN 3
+#define WLC_DUMP 6
+#define WLC_GET_MSGLEVEL 7
+#define WLC_SET_MSGLEVEL 8
+#define WLC_GET_PROMISC 9
+#define WLC_SET_PROMISC 10
+#define WLC_GET_RATE 12
+/* #define WLC_SET_RATE 13 */ /* no longer supported */
+#define WLC_GET_INSTANCE 14
+/* #define WLC_GET_FRAG 15 */ /* no longer supported */
+/* #define WLC_SET_FRAG 16 */ /* no longer supported */
+/* #define WLC_GET_RTS 17 */ /* no longer supported */
+/* #define WLC_SET_RTS 18 */ /* no longer supported */
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_SET_AUTH 22
+#define WLC_GET_BSSID 23
+#define WLC_SET_BSSID 24
+#define WLC_GET_SSID 25
+#define WLC_SET_SSID 26
+#define WLC_RESTART 27
+#define WLC_GET_CHANNEL 29
+#define WLC_SET_CHANNEL 30
+#define WLC_GET_SRL 31
+#define WLC_SET_SRL 32
+#define WLC_GET_LRL 33
+#define WLC_SET_LRL 34
+#define WLC_GET_PLCPHDR 35
+#define WLC_SET_PLCPHDR 36
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
+/* #define WLC_GET_WEP 42 */ /* no longer supported */
+/* #define WLC_SET_WEP 43 */ /* no longer supported */
+#define WLC_GET_KEY 44
+#define WLC_SET_KEY 45
+#define WLC_GET_REGULATORY 46
+#define WLC_SET_REGULATORY 47
+#define WLC_GET_PASSIVE 48
+#define WLC_SET_PASSIVE 49
+#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
+#define WLC_REASSOC 53
+#define WLC_GET_ROAM_TRIGGER 54
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_GET_TXANT 61
+#define WLC_SET_TXANT 62
+#define WLC_GET_ANTDIV 63
+#define WLC_SET_ANTDIV 64
+/* #define WLC_GET_TXPWR 65 */ /* no longer supported */
+/* #define WLC_SET_TXPWR 66 */ /* no longer supported */
+#define WLC_GET_CLOSED 67
+#define WLC_SET_CLOSED 68
+#define WLC_GET_MACLIST 69
+#define WLC_SET_MACLIST 70
+#define WLC_GET_RATESET 71
+#define WLC_SET_RATESET 72
+#define WLC_GET_LOCALE 73
+#define WLC_LONGTRAIN 74
+#define WLC_GET_BCNPRD 75
+#define WLC_SET_BCNPRD 76
+#define WLC_GET_DTIMPRD 77
+#define WLC_SET_DTIMPRD 78
+#define WLC_GET_SROM 79
+#define WLC_SET_SROM 80
+#define WLC_GET_WEP_RESTRICT 81
+#define WLC_SET_WEP_RESTRICT 82
+#define WLC_GET_COUNTRY 83
+#define WLC_SET_COUNTRY 84
+#define WLC_GET_PM 85
+#define WLC_SET_PM 86
+#define WLC_GET_WAKE 87
+#define WLC_SET_WAKE 88
+#define WLC_GET_D11CNTS 89
+#define WLC_GET_FORCELINK 90 /* ndis only */
+#define WLC_SET_FORCELINK 91 /* ndis only */
+#define WLC_FREQ_ACCURACY 92
+#define WLC_CARRIER_SUPPRESS 93
+#define WLC_GET_PHYREG 94
+#define WLC_SET_PHYREG 95
+#define WLC_GET_RADIOREG 96
+#define WLC_SET_RADIOREG 97
+#define WLC_GET_REVINFO 98
+#define WLC_GET_UCANTDIV 99
+#define WLC_SET_UCANTDIV 100
+#define WLC_R_REG 101
+#define WLC_W_REG 102
+#define WLC_DIAG_LOOPBACK 103
+#define WLC_RESET_D11CNTS 104
+#define WLC_GET_MACMODE 105
+#define WLC_SET_MACMODE 106
+#define WLC_GET_MONITOR 107
+#define WLC_SET_MONITOR 108
+#define WLC_GET_GMODE 109
+#define WLC_SET_GMODE 110
+#define WLC_GET_LEGACY_ERP 111
+#define WLC_SET_LEGACY_ERP 112
+#define WLC_GET_RX_ANT 113
+#define WLC_GET_CURR_RATESET 114 /* current rateset */
+#define WLC_GET_SCANSUPPRESS 115
+#define WLC_SET_SCANSUPPRESS 116
+#define WLC_GET_AP 117
+#define WLC_SET_AP 118
+#define WLC_GET_EAP_RESTRICT 119
+#define WLC_SET_EAP_RESTRICT 120
+#define WLC_SCB_AUTHORIZE 121
+#define WLC_SCB_DEAUTHORIZE 122
+#define WLC_GET_WDSLIST 123
+#define WLC_SET_WDSLIST 124
+#define WLC_GET_ATIM 125
+#define WLC_SET_ATIM 126
+#define WLC_GET_RSSI 127
+#define WLC_GET_PHYANTDIV 128
+#define WLC_SET_PHYANTDIV 129
+#define WLC_AP_RX_ONLY 130
+#define WLC_GET_TX_PATH_PWR 131
+#define WLC_SET_TX_PATH_PWR 132
+#define WLC_GET_WSEC 133
+#define WLC_SET_WSEC 134
+#define WLC_GET_PHY_NOISE 135
+#define WLC_GET_BSS_INFO 136
+#define WLC_GET_PKTCNTS 137
+#define WLC_GET_LAZYWDS 138
+#define WLC_SET_LAZYWDS 139
+#define WLC_GET_BANDLIST 140
+#define WLC_GET_BAND 141
+#define WLC_SET_BAND 142
+#define WLC_SCB_DEAUTHENTICATE 143
+#define WLC_GET_SHORTSLOT 144
+#define WLC_GET_SHORTSLOT_OVERRIDE 145
+#define WLC_SET_SHORTSLOT_OVERRIDE 146
+#define WLC_GET_SHORTSLOT_RESTRICT 147
+#define WLC_SET_SHORTSLOT_RESTRICT 148
+#define WLC_GET_GMODE_PROTECTION 149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
+#define WLC_UPGRADE 152
+/* #define WLC_GET_MRATE 153 */ /* no longer supported */
+/* #define WLC_SET_MRATE 154 */ /* no longer supported */
+#define WLC_GET_ASSOCLIST 159
+#define WLC_GET_CLK 160
+#define WLC_SET_CLK 161
+#define WLC_GET_UP 162
+#define WLC_OUT 163
+#define WLC_GET_WPA_AUTH 164
+#define WLC_SET_WPA_AUTH 165
+#define WLC_GET_PROTECTION_CONTROL 178
+#define WLC_SET_PROTECTION_CONTROL 179
+#define WLC_GET_PHYLIST 180
+#define WLC_GET_KEY_SEQ 183
+/* #define WLC_GET_GMODE_PROTECTION_CTS 198 */ /* no longer supported */
+/* #define WLC_SET_GMODE_PROTECTION_CTS 199 */ /* no longer supported */
+#define WLC_GET_PIOMODE 203
+#define WLC_SET_PIOMODE 204
+#define WLC_SET_LED 209
+#define WLC_GET_LED 210
+#define WLC_GET_CHANNEL_SEL 215
+#define WLC_START_CHANNEL_SEL 216
+#define WLC_GET_VALID_CHANNELS 217
+#define WLC_GET_FAKEFRAG 218
+#define WLC_SET_FAKEFRAG 219
+#define WLC_GET_WET 230
+#define WLC_SET_WET 231
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
+#define WLC_GET_RADAR 242
+#define WLC_SET_RADAR 243
+#define WLC_SET_SPECT_MANAGMENT 244
+#define WLC_GET_SPECT_MANAGMENT 245
+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER 248
+#define WLC_GET_CS_SCAN_TIMER 249
+#define WLC_SEND_PWR_CONSTRAINT 254
+#define WLC_CURRENT_PWR 256
+#define WLC_GET_CHANNELS_IN_COUNTRY 260
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_GET_VAR 262 /* get value of named variable */
+#define WLC_SET_VAR 263 /* set named variable to value */
+#define WLC_NVRAM_GET 264 /* deprecated */
+#define WLC_NVRAM_SET 265
+#define WLC_SET_WSEC_PMK 268
+#define WLC_GET_AUTH_MODE 269
+#define WLC_SET_AUTH_MODE 270
+#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
+#define WLC_NVOTPW 274
+#define WLC_OTPW 275
+#define WLC_SET_LOCALE 278
+#define WLC_LAST 279 /* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE 0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE 0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
+#define OID_WL_NDCONFIG_ITEM (WL_OID_BASE + WLC_NDCONFIG_ITEM)
+
+#define WL_DECRYPT_STATUS_SUCCESS 1
+#define WL_DECRYPT_STATUS_FAILURE 2
+#define WL_DECRYPT_STATUS_UNKNOWN 3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS 0
+#define WLC_UPGRADE_PENDING 1
+
+#ifdef CONFIG_USBRNDIS_RETAIL
+/* struct passed in for WLC_NDCONFIG_ITEM */
+typedef struct {
+ char *name;
+ void *param;
+} ndconfig_item_t;
+#endif
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE (1<<0)
+#define WL_RADIO_HW_DISABLE (1<<1)
+#define WL_RADIO_MPC_DISABLE (1<<2)
+#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
+
+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE (1<<31)
+
+/* "diag" iovar argument and error code */
+#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
+#define WL_DIAG_MEMORY 3 /* d11 memory test */
+#define WL_DIAG_LED 4 /* LED test */
+#define WL_DIAG_REG 5 /* d11/phy register test */
+#define WL_DIAG_SROM 6 /* srom read/crc test */
+#define WL_DIAG_DMA 7 /* DMA test */
+
+#define WL_DIAGERR_SUCCESS 0
+#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
+#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
+#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
+#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
+#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
+#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
+#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
+#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
+#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
+#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
+
+/* band types */
+#define WLC_BAND_AUTO 0 /* auto-select */
+#define WLC_BAND_5G 1 /* 5 Ghz */
+#define WLC_BAND_2G 2 /* 2.4 Ghz */
+#define WLC_BAND_ALL 3 /* all bands */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define WLC_PHY_TYPE_A 0
+#define WLC_PHY_TYPE_B 1
+#define WLC_PHY_TYPE_G 2
+#define WLC_PHY_TYPE_N 4
+#define WLC_PHY_TYPE_NULL 0xf
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
+
+/*
+ *
+ */
+#define GMODE_LEGACY_B 0
+#define GMODE_AUTO 1
+#define GMODE_ONLY 2
+#define GMODE_B_DEFERRED 3
+#define GMODE_PERFORMANCE 4
+#define GMODE_LRS 5
+#define GMODE_MAX 6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO -1
+#define WLC_PLCP_SHORT 0
+#define WLC_PLCP_LONG 1
+
+/* values for g_protection_override and n_protection_override */
+#define WLC_PROTECTION_AUTO -1
+#define WLC_PROTECTION_OFF 0
+#define WLC_PROTECTION_ON 1
+
+/* values for g_protection_control and n_protection_control */
+#define WLC_PROTECTION_CTL_OFF 0
+#define WLC_PROTECTION_CTL_LOCAL 1
+#define WLC_PROTECTION_CTL_OVERLAP 2
+
+/* deprecated const names for g_protection_override */
+#define WLC_G_PROTECTION_AUTO WLC_PROTECTION_AUTO
+#define WLC_G_PROTECTION_OFF WLC_PROTECTION_OFF
+#define WLC_G_PROTECTION_ON WLC_PROTECTION_ON
+
+/* deprecated const names for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF WLC_PROTECTION_CTL_OFF
+#define WLC_G_PROTECTION_CTL_LOCAL WLC_PROTECTION_CTL_LOCAL
+#define WLC_G_PROTECTION_CTL_OVERLAP WLC_PROTECTION_CTL_OVERLAP
+
+/* deprecated const names for get/set g_protection_control */
+#define WLC_GET_GMODE_PROTECTION_CONTROL WLC_GET_PROTECTION_CONTROL
+#define WLC_SET_GMODE_PROTECTION_CONTROL WLC_SET_PROTECTION_CONTROL
+
+/* values for n_protection */
+#define WLC_N_PROTECTION_OFF 0
+#define WLC_N_PROTECTION_MIXEDMODE 1
+#define WLC_N_PROTECTION_CTS 2
+
+/* values for n_preamble_type */
+#define WLC_N_PREAMBLE_MIXEDMODE 0
+#define WLC_N_PREAMBLE_GF 1
+
+/* Values for PM */
+#define PM_OFF 0
+#define PM_MAX 1
+#define PM_FAST 2
+
+
+
+typedef struct {
+ int npulses; /* required number of pulses at n * t_int */
+ int ncontig; /* required number of pulses at t_int */
+ int min_pw; /* minimum pulse width (20 MHz clocks) */
+ int max_pw; /* maximum pulse width (20 MHz clocks) */
+ uint16 thresh0; /* Radar detection, thresh 0 */
+ uint16 thresh1; /* Radar detection, thresh 1 */
+ int npulses_lp; /* Radar detection, minimum long pulses */
+ int min_pw_lp; /* Minimum pulsewidth for long pulses */
+ int max_pw_lp; /* Maximum pulsewidth for long pulses */
+ int min_fm_lp; /* Minimum fm for long pulses */
+ int max_deltat_lp; /* Maximum deltat for long pulses */
+ int min_deltat; /* Minimum spacing between pulses */
+} wl_radar_args_t;
+
+/* radar iovar SET defines */
+#define WL_RADAR_DETECTOR_OFF 0 /* radar detector off */
+#define WL_RADAR_DETECTOR_ON 1 /* radar detector on */
+#define WL_RADAR_SIMULATED 2 /* force radar detector to declare
+ * detection once
+ */
+
+/* dfs_status iovar-related defines */
+
+/* cac - channel availability check,
+ * ism - in-service monitoring
+ * csa - channel switching announcement
+ */
+
+/* cac state values */
+#define WL_DFS_CACSTATE_IDLE 0 /* state for operating in non-radar channel */
+#define WL_DFS_CACSTATE_PREISM_CAC 1 /* CAC in progress */
+#define WL_DFS_CACSTATE_ISM 2 /* ISM in progress */
+#define WL_DFS_CACSTATE_CSA 3 /* csa */
+#define WL_DFS_CACSTATE_POSTISM_CAC 4 /* ISM CAC */
+#define WL_DFS_CACSTATE_PREISM_OOC 5 /* PREISM OOC */
+#define WL_DFS_CACSTATE_POSTISM_OOC 6 /* POSTISM OOC */
+#define WL_DFS_CACSTATES 7 /* this many states exist */
+
+/* data structure used in 'dfs_status' wl interface, which is used to query dfs status */
+typedef struct {
+ uint state; /* noted by WL_DFS_CACSTATE_XX. */
+ uint duration; /* time spent in ms in state. */
+ /* as dfs enters ISM state, it removes the operational channel from quiet channel
+ * list and notes the channel in channel_cleared. set to 0 if no channel is cleared
+ */
+ chanspec_t chanspec_cleared;
+ /* chanspec cleared used to be a uint, add another to uint16 to maintain size */
+ uint16 pad;
+} wl_dfs_status_t;
+
+#define NUM_PWRCTRL_RATES 12
+
+typedef struct tx_inst_power {
+} tx_inst_power_t;
+
+
+/* regulatory enforcement levels */
+#define SPECT_MNGMT_OFF 0 /* both 11h and 11d disabled */
+#define SPECT_MNGMT_LOOSE_11H 1 /* allow non-11h APs in scan lists */
+#define SPECT_MNGMT_STRICT_11H 2 /* prune out non-11h APs from scan list */
+#define SPECT_MNGMT_STRICT_11D 3 /* switch to 802.11D mode */
+/* SPECT_MNGMT_LOOSE_11H_D - same as SPECT_MNGMT_LOOSE with the exception that Country IE
+ * adoption is done irregardless of capability-spectrum_management
+ */
+#define SPECT_MNGMT_LOOSE_11H_D 4 /* operation defined above */
+
+#define WL_CHAN_VALID_HW (1 << 0) /* valid with current HW */
+#define WL_CHAN_VALID_SW (1 << 1) /* valid with current country setting */
+#define WL_CHAN_BAND_5G (1 << 2) /* 5GHz-band channel */
+#define WL_CHAN_RADAR (1 << 3) /* radar sensitive channel */
+#define WL_CHAN_INACTIVE (1 << 4) /* temporarily inactive due to radar */
+#define WL_CHAN_PASSIVE (1 << 5) /* channel is in passive mode */
+#define WL_CHAN_RESTRICTED (1 << 6) /* restricted use channel */
+
+/* BTC mode used by "btc_mode" iovar */
+#define WL_BTC_DISABLE 0 /* disable BT coexistance */
+#define WL_BTC_ENABLE 1 /* enable BT coexistance */
+#define WL_BTC_PREMPT 2 /* enable BT coexistance and BT pre-emption */
+
+#define WL_MPC_VAL 0x00400000
+#define WL_APSTA_VAL 0x00800000
+#define WL_DFS_VAL 0x01000000
+#define WL_BA_VAL 0x02000000
+#define WL_NITRO_VAL 0x04000000
+#define WL_CAC_VAL 0x08000000
+#define WL_AMSDU_VAL 0x10000000
+#define WL_AMPDU_VAL 0x20000000
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define WL_LED_OFF 0 /* always off */
+#define WL_LED_ON 1 /* always on */
+#define WL_LED_ACTIVITY 2 /* activity */
+#define WL_LED_RADIO 3 /* radio enabled */
+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
+#define WL_LED_WI1 7
+#define WL_LED_WI2 8
+#define WL_LED_WI3 9
+#define WL_LED_ASSOC 10 /* associated state indicator */
+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
+#define WL_LED_NUMBEHAVIOR 12
+
+/* led behavior numeric value format */
+#define WL_LED_BEH_MASK 0x7f /* behavior mask */
+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
+
+/* max # of channels returnd by the get valid channels iovar */
+#define WL_NUMCHANSPECS 100
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
+
+/* number of bytes needed to define a 128-bit mask for MAC event reporting */
+#define WL_EVENTING_MASK_LEN 16
+
+/* Structures and constants used for "vndr_ie" IOVar interface */
+#define VNDR_IE_CMD_LEN 4 /* length of the set command string:
+ * "add", "del" (+ NULL)
+ */
+
+/* 802.11 Mgmt Packet flags */
+#define VNDR_IE_BEACON_FLAG 0x1
+#define VNDR_IE_PRBRSP_FLAG 0x2
+#define VNDR_IE_ASSOCRSP_FLAG 0x4
+#define VNDR_IE_AUTHRSP_FLAG 0x8
+
+#define VNDR_IE_INFO_HDR_LEN (sizeof(uint32))
+
+typedef struct {
+ uint32 pktflag; /* bitmask indicating which packet(s) contain this IE */
+ vndr_ie_t vndr_ie_data; /* vendor IE data */
+} vndr_ie_info_t;
+
+typedef struct {
+ int iecount; /* number of entries in the vndr_ie_list[] array */
+ vndr_ie_info_t vndr_ie_list[1]; /* variable size list of vndr_ie_info_t structs */
+} vndr_ie_buf_t;
+
+typedef struct {
+ char cmd[VNDR_IE_CMD_LEN]; /* vndr_ie IOVar set command : "add", "del" + NULL */
+ vndr_ie_buf_t vndr_ie_buffer; /* buffer containing Vendor IE list information */
+} vndr_ie_setbuf_t;
+
+/* join target preference types */
+#define WL_JOIN_PREF_RSSI 1 /* by RSSI, mandatory */
+#define WL_JOIN_PREF_WPA 2 /* by akm and ciphers, optional, RSN and WPA as values */
+#define WL_JOIN_PREF_BAND 3 /* by 802.11 band, optional, WLC_BAND_XXXX as values */
+
+/* band preference */
+#define WLJP_BAND_ASSOC_PREF 255 /* use assoc preference settings */
+ /* others use WLC_BAND_XXXX as values */
+
+/* any multicast cipher suite */
+#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
+
+struct tsinfo_arg {
+ uint8 octets[3];
+};
+
+#if !defined(__GNUC__)
+#pragma pack(pop)
+#endif
+
+#define NFIFO 6 /* # tx/rx fifopairs */
+
+#define WL_CNT_T_VERSION 1 /* current version of wl_cnt_t struct */
+
+typedef struct {
+ uint16 version; /* see definition of WL_CNT_T_VERSION */
+ uint16 length; /* length of entire structure */
+
+ /* transmit stat counters */
+ uint32 txframe; /* tx data frames */
+ uint32 txbyte; /* tx data bytes */
+ uint32 txretrans; /* tx mac retransmits */
+ uint32 txerror; /* tx data errors (derived: sum of others) */
+ uint32 txctl; /* tx management frames */
+ uint32 txprshort; /* tx short preamble frames */
+ uint32 txserr; /* tx status errors */
+ uint32 txnobuf; /* tx out of buffers errors */
+ uint32 txnoassoc; /* tx discard because we're not associated */
+ uint32 txrunt; /* tx runt frames */
+ uint32 txchit; /* tx header cache hit (fastpath) */
+ uint32 txcmiss; /* tx header cache miss (slowpath) */
+
+ /* transmit chip error counters */
+ uint32 txuflo; /* tx fifo underflows */
+ uint32 txphyerr; /* tx phy errors (indicated in tx status) */
+ uint32 txphycrs;
+
+ /* receive stat counters */
+ uint32 rxframe; /* rx data frames */
+ uint32 rxbyte; /* rx data bytes */
+ uint32 rxerror; /* rx data errors (derived: sum of others) */
+ uint32 rxctl; /* rx management frames */
+ uint32 rxnobuf; /* rx out of buffers errors */
+ uint32 rxnondata; /* rx non data frames in the data channel errors */
+ uint32 rxbadds; /* rx bad DS errors */
+ uint32 rxbadcm; /* rx bad control or management frames */
+ uint32 rxfragerr; /* rx fragmentation errors */
+ uint32 rxrunt; /* rx runt frames */
+ uint32 rxgiant; /* rx giant frames */
+ uint32 rxnoscb; /* rx no scb error */
+ uint32 rxbadproto; /* rx invalid frames */
+ uint32 rxbadsrcmac; /* rx frames with Invalid Src Mac */
+ uint32 rxbadda; /* rx frames tossed for invalid da */
+ uint32 rxfilter; /* rx frames filtered out */
+
+ /* receive chip error counters */
+ uint32 rxoflo; /* rx fifo overflow errors */
+ uint32 rxuflo[NFIFO]; /* rx dma descriptor underflow errors */
+
+ uint32 d11cnt_txrts_off; /* d11cnt txrts value when reset d11cnt */
+ uint32 d11cnt_rxcrc_off; /* d11cnt rxcrc value when reset d11cnt */
+ uint32 d11cnt_txnocts_off; /* d11cnt txnocts value when reset d11cnt */
+
+ /* misc counters */
+ uint32 dmade; /* tx/rx dma descriptor errors */
+ uint32 dmada; /* tx/rx dma data errors */
+ uint32 dmape; /* tx/rx dma descriptor protocol errors */
+ uint32 reset; /* reset count */
+ uint32 tbtt; /* cnts the TBTT int's */
+ uint32 txdmawar;
+ uint32 pkt_callback_reg_fail; /* callbacks register failure */
+
+ /* MAC counters: 32-bit version of d11.h's macstat_t */
+ uint32 txallfrm; /* total number of frames sent, incl. Data, ACK, RTS, CTS,
+ * Control Management (includes retransmissions)
+ */
+ uint32 txrtsfrm; /* number of RTS sent out by the MAC */
+ uint32 txctsfrm; /* number of CTS sent out by the MAC */
+ uint32 txackfrm; /* number of ACK frames sent out */
+ uint32 txdnlfrm; /* Not used */
+ uint32 txbcnfrm; /* beacons transmitted */
+ uint32 txfunfl[8]; /* per-fifo tx underflows */
+ uint32 txtplunfl; /* Template underflows (mac was too slow to transmit ACK/CTS
+ * or BCN)
+ */
+ uint32 txphyerror; /* Transmit phy error, type of error is reported in tx-status for
+ * driver enqueued frames
+ */
+ uint32 rxfrmtoolong; /* Received frame longer than legal limit (2346 bytes) */
+ uint32 rxfrmtooshrt; /* Received frame did not contain enough bytes for its frame type */
+ uint32 rxinvmachdr; /* Either the protocol version != 0 or frame type not
+ * data/control/management
+ */
+ uint32 rxbadfcs; /* number of frames for which the CRC check failed in the MAC */
+ uint32 rxbadplcp; /* parity check of the PLCP header failed */
+ uint32 rxcrsglitch; /* PHY was able to correlate the preamble but not the header */
+ uint32 rxstrt; /* Number of received frames with a good PLCP
+ * (i.e. passing parity check)
+ */
+ uint32 rxdfrmucastmbss; /* Number of received DATA frames with good FCS and matching RA */
+ uint32 rxmfrmucastmbss; /* number of received mgmt frames with good FCS and matching RA */
+ uint32 rxcfrmucast; /* number of received CNTRL frames with good FCS and matching RA */
+ uint32 rxrtsucast; /* number of unicast RTS addressed to the MAC (good FCS) */
+ uint32 rxctsucast; /* number of unicast CTS addressed to the MAC (good FCS) */
+ uint32 rxackucast; /* number of ucast ACKS received (good FCS) */
+ uint32 rxdfrmocast; /* number of received DATA frames (good FCS and not matching RA) */
+ uint32 rxmfrmocast; /* number of received MGMT frames (good FCS and not matching RA) */
+ uint32 rxcfrmocast; /* number of received CNTRL frame (good FCS and not matching RA) */
+ uint32 rxrtsocast; /* number of received RTS not addressed to the MAC */
+ uint32 rxctsocast; /* number of received CTS not addressed to the MAC */
+ uint32 rxdfrmmcast; /* number of RX Data multicast frames received by the MAC */
+ uint32 rxmfrmmcast; /* number of RX Management multicast frames received by the MAC */
+ uint32 rxcfrmmcast; /* number of RX Control multicast frames received by the MAC
+ * (unlikely to see these)
+ */
+ uint32 rxbeaconmbss; /* beacons received from member of BSS */
+ uint32 rxdfrmucastobss; /* number of unicast frames addressed to the MAC from
+ * other BSS (WDS FRAME)
+ */
+ uint32 rxbeaconobss; /* beacons received from other BSS */
+ uint32 rxrsptmout; /* Number of response timeouts for transmitted frames
+ * expecting a response
+ */
+ uint32 bcntxcancl; /* transmit beacons canceled due to receipt of beacon (IBSS) */
+ uint32 rxf0ovfl; /* Number of receive fifo 0 overflows */
+ uint32 rxf1ovfl; /* Number of receive fifo 1 overflows (obsolete) */
+ uint32 rxf2ovfl; /* Number of receive fifo 2 overflows (obsolete) */
+ uint32 txsfovfl; /* Number of transmit status fifo overflows (obsolete) */
+ uint32 pmqovfl; /* Number of PMQ overflows */
+ uint32 rxcgprqfrm; /* Number of received Probe requests that made it into
+ * the PRQ fifo
+ */
+ uint32 rxcgprsqovfl; /* Rx Probe Request Que overflow in the AP */
+ uint32 txcgprsfail; /* Tx Probe Response Fail. AP sent probe response but did
+ * not get ACK
+ */
+ uint32 txcgprssuc; /* Tx Probe Response Success (ACK was received) */
+ uint32 prs_timeout; /* Number of probe requests that were dropped from the PRQ
+ * fifo because a probe response could not be sent out within
+ * the time limit defined in M_PRS_MAXTIME
+ */
+ uint32 rxnack; /* Number of NACKS received (Afterburner) */
+ uint32 frmscons; /* Number of frames completed without transmission because of an
+ * Afterburner re-queue
+ */
+ uint32 txnack; /* Number of NACKs transmitted (Afterburner) */
+ uint32 txglitch_nack; /* obsolete */
+ uint32 txburst; /* obsolete */
+
+ /* 802.11 MIB counters, pp. 614 of 802.11 reaff doc. */
+ uint32 txfrag; /* dot11TransmittedFragmentCount */
+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
+ uint32 txfail; /* dot11FailedCount */
+ uint32 txretry; /* dot11RetryCount */
+ uint32 txretrie; /* dot11MultipleRetryCount */
+ uint32 rxdup; /* dot11FrameduplicateCount */
+ uint32 txrts; /* dot11RTSSuccessCount */
+ uint32 txnocts; /* dot11RTSFailureCount */
+ uint32 txnoack; /* dot11ACKFailureCount */
+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
+ uint32 rxcrc; /* dot11FCSErrorCount */
+ uint32 txfrmsnt; /* dot11TransmittedFrameCount (bogus MIB?) */
+ uint32 rxundec; /* dot11WEPUndecryptableCount */
+
+ /* WPA2 counters (see rxundec for DecryptFailureCount) */
+ uint32 tkipmicfaill; /* TKIPLocalMICFailures */
+ uint32 tkipcntrmsr; /* TKIPCounterMeasuresInvoked */
+ uint32 tkipreplay; /* TKIPReplays */
+ uint32 ccmpfmterr; /* CCMPFormatErrors */
+ uint32 ccmpreplay; /* CCMPReplays */
+ uint32 ccmpundec; /* CCMPDecryptErrors */
+ uint32 fourwayfail; /* FourWayHandshakeFailures */
+ uint32 wepundec; /* dot11WEPUndecryptableCount */
+ uint32 wepicverr; /* dot11WEPICVErrorCount */
+ uint32 decsuccess; /* DecryptSuccessCount */
+ uint32 tkipicverr; /* TKIPICVErrorCount */
+ uint32 wepexcluded; /* dot11WEPExcludedCount */
+
+ uint32 txchanrej; /* Tx frames suppressed due to channel rejection */
+ uint32 psmwds; /* Count PSM watchdogs */
+ uint32 phywatchdog; /* Count Phy lockups */
+} wl_cnt_t;
+
+#define WL_WME_CNT_VERSION 1 /* current version of wl_wme_cnt_t */
+
+typedef struct {
+ uint32 packets;
+ uint32 bytes;
+} wl_traffic_stats_t;
+
+typedef struct {
+ uint16 version; /* see definition of WL_CNT_T_VERSION */
+ uint16 length; /* length of entire structure */
+
+ wl_traffic_stats_t tx[AC_COUNT]; /* Packets transmitted */
+ wl_traffic_stats_t tx_failed[AC_COUNT]; /* Packets dropped or failed to transmit */
+ wl_traffic_stats_t rx[AC_COUNT]; /* Packets received */
+ wl_traffic_stats_t rx_failed[AC_COUNT]; /* Packets failed to receive */
+
+ wl_traffic_stats_t forward[AC_COUNT]; /* Packets forwarded by AP */
+
+ wl_traffic_stats_t tx_expired[AC_COUNT]; /* packets dropped due to lifetime expiry */
+
+} wl_wme_cnt_t;
+
+#ifdef WLBA
+
+#define WLC_BA_CNT_VERSION 1 /* current version of wlc_ba_cnt_t */
+
+/* block ack related stats */
+typedef struct wlc_ba_cnt {
+ uint16 version; /* WLC_BA_CNT_VERSION */
+ uint16 length; /* length of entire structure */
+
+ /* transmit stat counters */
+ uint32 txpdu; /* pdus sent */
+ uint32 txsdu; /* sdus sent */
+ uint32 txfc; /* tx side flow controlled packets */
+ uint32 txfci; /* tx side flow control initiated */
+ uint32 txretrans; /* retransmitted pdus */
+ uint32 txbatimer; /* ba resend due to timer */
+ uint32 txdrop; /* dropped packets */
+ uint32 txaddbareq; /* addba req sent */
+ uint32 txaddbaresp; /* addba resp sent */
+ uint32 txdelba; /* delba sent */
+ uint32 txba; /* ba sent */
+ uint32 txbar; /* bar sent */
+ uint32 txpad[4]; /* future */
+
+ /* receive side counters */
+ uint32 rxpdu; /* pdus recd */
+ uint32 rxqed; /* pdus buffered before sending up */
+ uint32 rxdup; /* duplicate pdus */
+ uint32 rxnobuf; /* pdus discarded due to no buf */
+ uint32 rxaddbareq; /* addba req recd */
+ uint32 rxaddbaresp; /* addba resp recd */
+ uint32 rxdelba; /* delba recd */
+ uint32 rxba; /* ba recd */
+ uint32 rxbar; /* bar recd */
+ uint32 rxinvba; /* invalid ba recd */
+ uint32 rxbaholes; /* ba recd with holes */
+ uint32 rxunexp; /* unexpected packets */
+ uint32 rxpad[4]; /* future */
+} wlc_ba_cnt_t;
+#endif /* WLBA */
+
+/* structure for per-tid ampdu control */
+struct ampdu_tid_control {
+ uint8 tid; /* tid */
+ uint8 enable; /* enable/disable */
+};
+
+/* structure for addts arguments */
+/* For ioctls that take a list of TSPEC */
+struct tslist {
+ int count; /* number of tspecs */
+ struct tsinfo_arg tsinfo[1]; /* variable length array of tsinfo */
+};
+
+/* structure for addts/delts arguments */
+typedef struct tspec_arg {
+ uint16 version; /* see definition of TSPEC_ARG_VERSION */
+ uint16 length; /* length of entire structure */
+ uint flag; /* bit field */
+ /* TSPEC Arguments */
+ struct tsinfo_arg tsinfo; /* TS Info bit field */
+ uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
+ uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
+ uint min_srv_interval; /* Minimum Service Interval (us) */
+ uint max_srv_interval; /* Maximum Service Interval (us) */
+ uint inactivity_interval; /* Inactivity Interval (us) */
+ uint suspension_interval; /* Suspension Interval (us) */
+ uint srv_start_time; /* Service Start Time (us) */
+ uint min_data_rate; /* Minimum Data Rate (bps) */
+ uint mean_data_rate; /* Mean Data Rate (bps) */
+ uint peak_data_rate; /* Peak Data Rate (bps) */
+ uint max_burst_size; /* Maximum Burst Size (bytes) */
+ uint delay_bound; /* Delay Bound (us) */
+ uint min_phy_rate; /* Minimum PHY Rate (bps) */
+ uint16 surplus_bw; /* Surplus Bandwidth Allowance Factor */
+ uint16 medium_time; /* Medium Time (32 us/s periods) */
+} tspec_arg_t;
+
+/* current version of wl_tspec_arg_t struct */
+#define TSPEC_ARG_VERSION 1 /* current version of wl_tspec_arg_t struct */
+#define TSPEC_ARG_LENGTH 55 /* argment length from tsinfo to medium_time */
+
+/* define for flag */
+#define TSPEC_PENDING 0 /* TSPEC pending */
+#define TSPEC_ACCEPTED 1 /* TSPEC accepted */
+#define TSPEC_REJECTED 2 /* TSPEC rejected */
+#define TSPEC_UNKNOWN 3 /* TSPEC unknown */
+#define TSPEC_STATUS_MASK 7 /* TSPEC status mask */
+
+
+/* Software feature flag defines used by wlfeatureflag */
+#define WL_SWFL_ABBFL 0x0001 /* Allow Afterburner on systems w/o hardware BFL */
+#define WL_SWFL_ABENCORE 0x0002 /* Allow AB on non-4318E chips */
+
+#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
+
+/* Packet lifetime configuration per ac */
+typedef struct wl_lifetime {
+ uint32 ac; /* access class */
+ uint32 lifetime; /* Packet lifetime value in ms */
+} wl_lifetime_t;
+
+#endif /* _wlioctl_h_ */
--- /dev/null
+/*
+ * Broadcom wireless network adapter utility functions
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wlutils.h,v 1.1.1.12 2006/02/27 03:43:20 honor Exp $
+ */
+
+#ifndef _wlutils_h_
+#define _wlutils_h_
+
+#include <typedefs.h>
+#include <wlioctl.h>
+
+/*
+ * Pass a wlioctl request to the specified interface.
+ * @param name interface name
+ * @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST
+ * @param buf buffer for passing in and/or receiving data
+ * @param len length of buf
+ * @return >= 0 if successful or < 0 otherwise
+ */
+extern int wl_ioctl(char *name, int cmd, void *buf, int len);
+
+/*
+ * Probe the specified interface.
+ * @param name interface name
+ * @return >= 0 if a Broadcom wireless device or < 0 otherwise
+ */
+extern int wl_probe(char *name);
+
+extern int wl_iovar_set(char *ifname, char *iovar, void *param, int paramlen);
+extern int wl_iovar_get(char *ifname, char *iovar, void *bufptr, int buflen);
+/*
+ * Set/Get named variable.
+ * @param ifname interface name
+ * @param iovar variable name
+ * @param param input param value/buffer
+ * @param paramlen input param value/buffer length
+ * @param bufptr io buffer
+ * @param buflen io buffer length
+ * @param val val or val pointer for int routines
+ * @return success == 0, failure != 0
+ */
+/*
+ * set named driver variable to int value
+ * calling example: wl_iovar_setint(ifname, "arate", rate)
+*/
+static inline int
+wl_iovar_setint(char *ifname, char *iovar, int val)
+{
+ return wl_iovar_set(ifname, iovar, &val, sizeof(val));
+}
+
+/*
+ * get named driver variable to int value and return error indication
+ * calling example: wl_iovar_getint(ifname, "arate", &rate)
+ */
+static inline int
+wl_iovar_getint(char *ifname, char *iovar, int *val)
+{
+ return wl_iovar_get(ifname, iovar, val, sizeof(int));
+}
+
+/*
+ * Set/Get named variable indexed by BSS Configuration
+ * @param ifname interface name
+ * @param iovar variable name
+ * @param bssidx bsscfg index
+ * @param param input param value/buffer
+ * @param paramlen input param value/buffer length
+ * @param bufptr io buffer
+ * @param buflen io buffer length
+ * @param val val or val pointer for int routines
+ * @return success == 0, failure != 0
+ */
+extern int wl_bssiovar_get(char *ifname, char *iovar, int bssidx, void *outbuf, int len);
+extern int wl_bssiovar_set(char *ifname, char *iovar, int bssidx, void *param, int paramlen);
+/*
+ * set named & bss indexed driver variable to int value
+ */
+static inline int
+wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val)
+{
+ return wl_bssiovar_set(ifname, iovar, bssidx, &val, sizeof(int));
+}
+
+static inline int
+wl_bssiovar_getint(char *ifname, char *iovar, int bssidx, int *val)
+{
+ return wl_bssiovar_get(ifname, iovar, bssidx, val, sizeof(int));
+}
+
+extern int wl_bssiovar_setint(char *ifname, char *iovar, int bssidx, int val);
+
+#endif /* _wlutils_h_ */
--- /dev/null
+/*
+ * Wireless network adapter utilities
+ *
+ * Copyright 2006, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id: wl.c,v 1.1.1.11 2006/02/27 03:43:20 honor Exp $
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <net/if.h>
+#include <linux/types.h>
+
+typedef u_int64_t u64;
+typedef u_int32_t u32;
+typedef u_int16_t u16;
+typedef u_int8_t u8;
+#include <linux/sockios.h>
+#include <linux/ethtool.h>
+
+#include <typedefs.h>
+#include <wlioctl.h>
+#include <bcmutils.h>
+#include <wlutils.h>
+
+int
+wl_ioctl(char *name, int cmd, void *buf, int len)
+{
+ struct ifreq ifr;
+ wl_ioctl_t ioc;
+ int ret = 0;
+ int s;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return errno;
+ }
+
+ /* do it */
+ ioc.cmd = cmd;
+ ioc.buf = buf;
+ ioc.len = len;
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ ifr.ifr_data = (caddr_t) &ioc;
+ if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0)
+
+ /* cleanup */
+ close(s);
+ return ret;
+}
+
+static inline int
+wl_get_dev_type(char *name, void *buf, int len)
+{
+ int s;
+ int ret;
+ struct ifreq ifr;
+ struct ethtool_drvinfo info;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return -1;
+ }
+
+ /* get device type */
+ memset(&info, 0, sizeof(info));
+ info.cmd = ETHTOOL_GDRVINFO;
+ ifr.ifr_data = (caddr_t)&info;
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ if ((ret = ioctl(s, SIOCETHTOOL, &ifr)) < 0) {
+ *(char *)buf = '\0';
+ } else
+ strncpy(buf, info.driver, len);
+
+ close(s);
+ return ret;
+}
+
+int
+wl_probe(char *name)
+{
+ int ret, val;
+ char buf[3];
+ if ((ret = wl_get_dev_type(name, buf, 3)) < 0)
+ return ret;
+ /* Check interface */
+ if (strncmp(buf, "wl", 2))
+ return -1;
+ if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val))))
+ return ret;
+ if (val > WLC_IOCTL_VERSION)
+ return -1;
+
+ return ret;
+}
+
+static int
+wl_iovar_getbuf(char *ifname, char *iovar, void *param, int paramlen, void *bufptr, int buflen)
+{
+ int err;
+ uint namelen;
+ uint iolen;
+
+ namelen = strlen(iovar) + 1; /* length of iovar name plus null */
+ iolen = namelen + paramlen;
+
+ /* check for overflow */
+ if (iolen > buflen)
+ return (BCME_BUFTOOSHORT);
+
+ memcpy(bufptr, iovar, namelen); /* copy iovar name including null */
+ memcpy((int8*)bufptr + namelen, param, paramlen);
+
+ err = wl_ioctl(ifname, WLC_GET_VAR, bufptr, buflen);
+
+ return (err);
+}
+
+static int
+wl_iovar_setbuf(char *ifname, char *iovar, void *param, int paramlen, void *bufptr, int buflen)
+{
+ uint namelen;
+ uint iolen;
+
+ namelen = strlen(iovar) + 1; /* length of iovar name plus null */
+ iolen = namelen + paramlen;
+
+ /* check for overflow */
+ if (iolen > buflen)
+ return (BCME_BUFTOOSHORT);
+
+ memcpy(bufptr, iovar, namelen); /* copy iovar name including null */
+ memcpy((int8*)bufptr + namelen, param, paramlen);
+
+ return wl_ioctl(ifname, WLC_SET_VAR, bufptr, iolen);
+}
+
+int
+wl_iovar_set(char *ifname, char *iovar, void *param, int paramlen)
+{
+ char smbuf[WLC_IOCTL_SMLEN];
+
+ return wl_iovar_setbuf(ifname, iovar, param, paramlen, smbuf, sizeof(smbuf));
+}
+
+int
+wl_iovar_get(char *ifname, char *iovar, void *bufptr, int buflen)
+{
+ char smbuf[WLC_IOCTL_SMLEN];
+ int ret;
+
+ /* use the return buffer if it is bigger than what we have on the stack */
+ if (buflen > sizeof(smbuf)) {
+ ret = wl_iovar_getbuf(ifname, iovar, NULL, 0, bufptr, buflen);
+ } else {
+ ret = wl_iovar_getbuf(ifname, iovar, NULL, 0, smbuf, sizeof(smbuf));
+ if (ret == 0)
+ memcpy(bufptr, smbuf, buflen);
+ }
+
+ return ret;
+}
+
+
+/*
+ * format a bsscfg indexed iovar buffer
+ */
+static int
+wl_bssiovar_mkbuf(char *iovar, int bssidx, void *param, int paramlen, void *bufptr, int buflen,
+ int *plen)
+{
+ char *prefix = "bsscfg:";
+ int8* p;
+ uint prefixlen;
+ uint namelen;
+ uint iolen;
+
+ prefixlen = strlen(prefix); /* length of bsscfg prefix */
+ namelen = strlen(iovar) + 1; /* length of iovar name + null */
+ iolen = prefixlen + namelen + sizeof(int) + paramlen;
+
+ /* check for overflow */
+ if (buflen < 0 || iolen > (uint)buflen) {
+ *plen = 0;
+ return BCME_BUFTOOSHORT;
+ }
+
+ p = (int8*)bufptr;
+
+ /* copy prefix, no null */
+ memcpy(p, prefix, prefixlen);
+ p += prefixlen;
+
+ /* copy iovar name including null */
+ memcpy(p, iovar, namelen);
+ p += namelen;
+
+ /* bss config index as first param */
+ memcpy(p, &bssidx, sizeof(int32));
+ p += sizeof(int32);
+
+ /* parameter buffer follows */
+ if (paramlen)
+ memcpy(p, param, paramlen);
+
+ *plen = iolen;
+ return 0;
+}
+
+/*
+ * set named & bss indexed driver variable to buffer value
+ */
+static int
+wl_bssiovar_setbuf(char *ifname, char *iovar, int bssidx, void *param, int paramlen, void *bufptr,
+ int buflen)
+{
+ int err;
+ int iolen;
+
+ err = wl_bssiovar_mkbuf(iovar, bssidx, param, paramlen, bufptr, buflen, &iolen);
+ if (err)
+ return err;
+
+ return wl_ioctl(ifname, WLC_SET_VAR, bufptr, iolen);
+}
+
+/*
+ * get named & bss indexed driver variable buffer value
+ */
+static int
+wl_bssiovar_getbuf(char *ifname, char *iovar, int bssidx, void *param, int paramlen, void *bufptr,
+ int buflen)
+{
+ int err;
+ int iolen;
+
+ err = wl_bssiovar_mkbuf(iovar, bssidx, param, paramlen, bufptr, buflen, &iolen);
+ if (err)
+ return err;
+
+ return wl_ioctl(ifname, WLC_GET_VAR, bufptr, buflen);
+}
+
+/*
+ * set named & bss indexed driver variable to buffer value
+ */
+int
+wl_bssiovar_set(char *ifname, char *iovar, int bssidx, void *param, int paramlen)
+{
+ char smbuf[WLC_IOCTL_SMLEN];
+
+ return wl_bssiovar_setbuf(ifname, iovar, bssidx, param, paramlen, smbuf, sizeof(smbuf));
+}
+
+/*
+ * get named & bss indexed driver variable buffer value
+ */
+int
+wl_bssiovar_get(char *ifname, char *iovar, int bssidx, void *outbuf, int len)
+{
+ char smbuf[WLC_IOCTL_SMLEN];
+ int err;
+
+ /* use the return buffer if it is bigger than what we have on the stack */
+ if (len > (int)sizeof(smbuf)) {
+ err = wl_bssiovar_getbuf(ifname, iovar, bssidx, NULL, 0, outbuf, len);
+ } else {
+ memset(smbuf, 0, sizeof(smbuf));
+ err = wl_bssiovar_getbuf(ifname, iovar, bssidx, NULL, 0, smbuf, sizeof(smbuf));
+ if (err == 0)
+ memcpy(outbuf, smbuf, len);
+ }
+
+ return err;
+}
+
+void
+wl_printlasterror(char *name)
+{
+ char err_buf[WLC_IOCTL_SMLEN];
+ strcpy(err_buf, "bcmerrstr");
+
+ fprintf(stderr, "Error: ");
+ if ( wl_ioctl(name, WLC_GET_VAR, err_buf, sizeof (err_buf)) != 0)
+ fprintf(stderr, "Error getting the Errorstring from driver\n");
+ else
+ fprintf(stderr, err_buf);
+}
--- /dev/null
+/*
+ * wlc - Broadcom Wireless Driver Control Utility
+ *
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <glob.h>
+#include <ctype.h>
+
+#include <typedefs.h>
+#include <wlutils.h>
+#include <proto/802.11.h>
+
+#define VERSION "0.1"
+#define BUFSIZE 8192
+#define PTABLE_MAGIC 0xbadc0ded
+#define PTABLE_SLT1 1
+#define PTABLE_SLT2 2
+#define PTABLE_ACKW 3
+#define PTABLE_ADHM 4
+#define PTABLE_END 0xffffffff
+
+/*
+ * Copy each token in wordlist delimited by space into word
+ * Taken from Broadcom shutils.h
+ */
+#define foreach(word, wordlist, next) \
+ for (next = &wordlist[strspn(wordlist, " ")], \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '); \
+ strlen(word); \
+ next = next ? &next[strspn(next, " ")] : "", \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '))
+
+static char wlbuf[8192];
+static char interface[16] = "wl0";
+static unsigned long ptable[128];
+static unsigned long kmem_offset = 0;
+static int vif = 0, debug = 1, fromstdin = 0;
+
+typedef enum {
+ NONE = 0x00,
+
+ /* types */
+ PARAM_TYPE = 0x00f,
+ INT = 0x001,
+ STRING = 0x002,
+
+ /* options */
+ PARAM_OPTIONS = 0x0f0,
+ NOARG = 0x010,
+
+ /* modes */
+ PARAM_MODE = 0xf00,
+ GET = 0x100,
+ SET = 0x200,
+} wlc_param;
+
+struct wlc_call {
+ const char *name;
+ wlc_param param;
+ int (*handler)(wlc_param param, void *data, void *value);
+ union {
+ int num;
+ char *str;
+ void *ptr;
+ } data;
+ const char *desc;
+};
+
+/* can't use the system include because of the stupid broadcom header files */
+extern struct ether_addr *ether_aton(const char *asc);
+extern char *ether_ntoa(const struct ether_addr *addr);
+
+/*
+ * find the starting point of wl.o in memory
+ * by reading /proc/ksyms
+ */
+static inline void wlc_get_mem_offset(void)
+{
+ FILE *f;
+ char s[64];
+
+ /* yes, i'm lazy ;) */
+ f = popen("grep '\\[wl]' /proc/ksyms | sort", "r");
+ if (fgets(s, 64, f) == 0)
+ return;
+
+ pclose(f);
+
+ s[8] = 0;
+ kmem_offset = strtoul(s, NULL, 16);
+
+ /* sanity check */
+ if (kmem_offset < 0xc0000000)
+ kmem_offset = 0;
+}
+
+
+static int ptable_init(void)
+{
+ glob_t globbuf;
+ struct stat statbuf;
+ int fd;
+
+ if (ptable[0] == PTABLE_MAGIC)
+ return 0;
+
+ glob("/lib/modules/2.4.*/wl.o", 0, NULL, &globbuf);
+
+ if (globbuf.gl_pathv[0] == NULL)
+ return -1;
+
+ if ((fd = open(globbuf.gl_pathv[0], O_RDONLY)) < 0)
+ return -1;
+
+ if (fstat(fd, &statbuf) < 0)
+ goto failed;
+
+ if (statbuf.st_size <= 512)
+ goto failed;
+
+ if (lseek(fd, statbuf.st_size - 512, SEEK_SET) < 0) {
+ perror("lseek");
+ goto failed;
+ }
+
+ if (read(fd, ptable, 512) < 512)
+ goto failed;
+
+ if (ptable[0] != PTABLE_MAGIC)
+ goto failed;
+
+ close(fd);
+
+ wlc_get_mem_offset();
+ if (kmem_offset == 0)
+ return -1;
+
+ return 0;
+
+failed:
+ close(fd);
+
+ return -1;
+}
+
+static inline unsigned long wlc_kmem_read(unsigned long offset)
+{
+ int fd;
+ unsigned long ret;
+
+ if ((fd = open("/dev/kmem", O_RDONLY )) < 0)
+ return -1;
+
+ lseek(fd, 0x70000000, SEEK_SET);
+ lseek(fd, (kmem_offset - 0x70000000) + offset, SEEK_CUR);
+ read(fd, &ret, 4);
+ close(fd);
+
+ return ret;
+}
+
+static inline void wlc_kmem_write(unsigned long offset, unsigned long value)
+{
+ int fd;
+
+ if ((fd = open("/dev/kmem", O_WRONLY )) < 0)
+ return;
+
+ lseek(fd, 0x70000000, SEEK_SET);
+ lseek(fd, (kmem_offset - 0x70000000) + offset, SEEK_CUR);
+ write(fd, &value, 4);
+ close(fd);
+}
+
+static int wlc_patcher_getval(unsigned long key, unsigned long *val)
+{
+ unsigned long *pt = &ptable[1];
+ unsigned long tmp;
+
+ if (ptable_init() < 0) {
+ fprintf(stderr, "Could not load the ptable\n");
+ return -1;
+ }
+
+ while (*pt != PTABLE_END) {
+ if (*pt == key) {
+ tmp = wlc_kmem_read(pt[1]);
+
+ if (tmp == pt[2])
+ *val = 0xffffffff;
+ else
+ *val = tmp;
+
+ return 0;
+ }
+ pt += 3;
+ }
+
+ return -1;
+}
+
+static int wlc_patcher_setval(unsigned long key, unsigned long val)
+{
+ unsigned long *pt = &ptable[1];
+
+ if (ptable_init() < 0) {
+ fprintf(stderr, "Could not load the ptable\n");
+ return -1;
+ }
+
+ if (val != 0xffffffff)
+ val = (pt[2] & ~(0xffff)) | (val & 0xffff);
+
+ while (*pt != PTABLE_END) {
+ if (*pt == key) {
+ if (val == 0xffffffff) /* default */
+ val = pt[2];
+
+ wlc_kmem_write(pt[1], val);
+ }
+ pt += 3;
+ }
+
+ return 0;
+}
+
+static int wlc_slottime(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret = 0;
+
+ if ((param & PARAM_MODE) == SET) {
+ wlc_patcher_setval(PTABLE_SLT1, *val);
+ wlc_patcher_setval(PTABLE_SLT2, ((*val == -1) ? *val : *val + 510));
+ } else if ((param & PARAM_MODE) == GET) {
+ ret = wlc_patcher_getval(PTABLE_SLT1, (unsigned long *) val);
+ if (*val != 0xffffffff)
+ *val &= 0xffff;
+ }
+
+ return ret;
+}
+
+static int wlc_noack(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret = 0;
+
+ if ((param & PARAM_MODE) == SET) {
+ wlc_patcher_setval(PTABLE_ACKW, ((*val) ? 1 : 0));
+ } else if ((param & PARAM_MODE) == GET) {
+ ret = wlc_patcher_getval(PTABLE_ACKW, (unsigned long *) val);
+ *val &= 0xffff;
+ *val = (*val ? 1 : 0);
+ }
+
+ return ret;
+}
+
+static int wlc_ibss_merge(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret = 0;
+
+ if ((param & PARAM_MODE) == SET) {
+ /* overwrite the instruction with 'lui v0,0x0' - fake a return
+ * status of 0 for wlc_bcn_tsf_later */
+ wlc_patcher_setval(PTABLE_ACKW, ((*val) ? -1 : 0x3c020000));
+ } else if ((param & PARAM_MODE) == GET) {
+ ret = wlc_patcher_getval(PTABLE_ACKW, (unsigned long *) val);
+ *val = ((*val == -1) ? 1 : 0);
+ }
+
+ return ret;
+}
+
+static int wlc_ioctl(wlc_param param, void *data, void *value)
+{
+ unsigned int *var = ((unsigned int *) data);
+ unsigned int ioc = *var;
+
+ if (param & NOARG) {
+ return wl_ioctl(interface, ioc, NULL, 0);
+ }
+ switch(param & PARAM_TYPE) {
+ case INT:
+ return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, sizeof(int));
+ case STRING:
+ return wl_ioctl(interface, ((param & SET) ? (ioc) : (ioc >> 16)) & 0xffff, value, BUFSIZE);
+ }
+ return 0;
+}
+
+static int wlc_iovar(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ char *iov = *((char **) data);
+ int ret = 0;
+
+ if (param & SET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_iovar_setint(interface, iov, *val);
+ }
+ }
+ if (param & GET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_iovar_getint(interface, iov, val);
+ }
+ }
+
+ return ret;
+}
+
+static int wlc_bssiovar(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ char *iov = *((char **) data);
+ int ret = 0;
+
+ if (param & SET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_bssiovar_setint(interface, iov, vif, *val);
+ }
+ }
+ if (param & GET) {
+ switch(param & PARAM_TYPE) {
+ case INT:
+ ret = wl_bssiovar_getint(interface, iov, vif, val);
+ }
+ }
+
+ return ret;
+}
+
+static int wlc_vif_enabled(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int buf[3];
+ int ret = 0;
+
+ sprintf((char *) buf, "bss");
+ buf[1] = vif;
+ if (param & SET) {
+ buf[2] = (*val ? 1 : 0);
+ ret = wl_ioctl(interface, WLC_SET_VAR, buf, sizeof(buf));
+ } else if (param & GET) {
+ ret = wl_ioctl(interface, WLC_GET_VAR, buf, sizeof(buf));
+ *val = buf[0];
+ }
+
+ return ret;
+}
+
+static int wlc_ssid(wlc_param param, void *data, void *value)
+{
+ int ret = -1, ret2 = -1;
+ char *dest = (char *) value;
+ wlc_ssid_t ssid;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_bssiovar_get(interface, "ssid", vif, &ssid, sizeof(ssid));
+
+ if (ret)
+ /* if we can't get the ssid through the bssiovar, try WLC_GET_SSID */
+ ret = wl_ioctl(interface, WLC_GET_SSID, &ssid, sizeof(ssid));
+
+ if (!ret) {
+ memcpy(dest, ssid.SSID, ssid.SSID_len);
+ dest[ssid.SSID_len] = 0;
+ }
+ } else if ((param & PARAM_MODE) == SET) {
+ strncpy(ssid.SSID, value, 32);
+ ssid.SSID_len = strlen(value);
+
+ if (ssid.SSID_len > 32)
+ ssid.SSID_len = 32;
+
+ if (vif == 0) {
+ /* for the main interface, also try the WLC_SET_SSID call */
+ ret2 = wl_ioctl(interface, WLC_SET_SSID, &ssid, sizeof(ssid));
+ }
+
+ ret = wl_bssiovar_set(interface, "ssid", vif, &ssid, sizeof(ssid));
+ ret = (!ret2 ? 0 : ret);
+ }
+
+ return ret;
+}
+
+static int wlc_int(wlc_param param, void *data, void *value)
+{
+ int *var = *((int **) data);
+ int *val = (int *) value;
+
+ if ((param & PARAM_MODE) == SET) {
+ *var = *val;
+ } else if ((param & PARAM_MODE) == GET) {
+ *val = *var;
+ }
+
+ return 0;
+}
+
+static int wlc_flag(wlc_param param, void *data, void *value)
+{
+ int *var = *((int **) data);
+
+ *var = 1;
+
+ return 0;
+}
+
+static int wlc_string(wlc_param param, void *data, void *value)
+{
+ char *var = *((char **) data);
+
+ if ((param & PARAM_MODE) == GET) {
+ strcpy(value, var);
+ }
+
+ return 0;
+}
+
+static int wlc_afterburner(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret = 0;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_iovar_getint(interface, "afterburner", val);
+ } else {
+ wl_iovar_setint(interface, "wlfeatureflag", (*val ? 3 : 0));
+ ret = wl_iovar_setint(interface, "afterburner", (*val ? 1 : 0));
+ wl_iovar_setint(interface, "afterburner_override", *val);
+ }
+
+ return ret;
+}
+
+static int wlc_maclist(wlc_param param, void *data, void *value)
+{
+ unsigned int *var = ((unsigned int *) data);
+ unsigned int ioc = *var;
+ int limit = (sizeof(wlbuf) - 4) / sizeof(struct ether_addr);
+ struct maclist *list = (struct maclist *) wlbuf;
+ char *str = (char *) value;
+ char astr[30], *p;
+ struct ether_addr *addr;
+ int isset = 0;
+ int ret;
+
+ if ((param & PARAM_MODE) == GET) {
+ list->count = limit;
+ ret = wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf));
+
+ if (!ret)
+ while (list->count)
+ str += sprintf(str, "%s%s", ((((char *) value) == str) ? "" : " "), ether_ntoa(&list->ea[list->count-- - 1]));
+
+ return ret;
+ } else {
+ while (*str && isspace(*str))
+ *str++;
+
+ if (*str == '+') {
+ str++;
+
+ list->count = limit;
+ if (wl_ioctl(interface, (ioc >> 16) & 0xffff, wlbuf, sizeof(wlbuf)) == 0)
+ isset = 1;
+
+ while (*str && isspace(*str))
+ str++;
+ }
+
+ if (!isset)
+ memset(wlbuf, 0, sizeof(wlbuf));
+
+ foreach(astr, str, p) {
+ if (list->count >= limit)
+ break;
+
+ if ((addr = ether_aton(astr)) != NULL)
+ memcpy(&list->ea[list->count++], addr, sizeof(struct ether_addr));
+ }
+
+ return wl_ioctl(interface, ioc & 0xffff, wlbuf, sizeof(wlbuf));
+ }
+}
+
+static int wlc_radio(wlc_param param, void *data, void *value)
+{
+ int *val = (int *) value;
+ int ret;
+
+ if ((param & PARAM_MODE) == GET) {
+ ret = wl_ioctl(interface, WLC_GET_RADIO, val, sizeof(int));
+ *val = ((*val & 1) ? 0 : 1);
+ } else {
+ *val = (1 << 16) | (*val ? 0 : 1);
+ ret = wl_ioctl(interface, WLC_SET_RADIO, val, sizeof(int));
+ }
+
+ return ret;
+}
+
+static int wlc_wsec_key(wlc_param param, void *null, void *value)
+{
+ wl_wsec_key_t wsec_key;
+ unsigned char *index = value;
+ unsigned char *key;
+ unsigned char *data;
+ unsigned char hex[3];
+
+ if ((param & PARAM_MODE) != SET)
+ return 0;
+
+ memset(&wsec_key, 0, sizeof(wsec_key));
+ if (index[0] == '=') {
+ wsec_key.flags = WL_PRIMARY_KEY;
+ index++;
+ }
+
+ if ((index[0] < '1') || (index[0] > '4') || (index[1] != ','))
+ return -1;
+
+ key = index + 2;
+ if (strncmp(key, "d:", 2) == 0) { /* delete key */
+ } else if (strncmp(key, "s:", 2) == 0) { /* ascii key */
+ key += 2;
+ wsec_key.len = strlen(key);
+
+ if ((wsec_key.len != 5) && (wsec_key.len != 13))
+ return -1;
+
+ strcpy(wsec_key.data, key);
+ } else { /* hex key */
+ wsec_key.len = strlen(key);
+ if ((wsec_key.len != 10) && (wsec_key.len != 26))
+ return -1;
+
+ wsec_key.len /= 2;
+ data = wsec_key.data;
+ hex[2] = 0;
+ do {
+ hex[0] = *(key++);
+ hex[1] = *(key++);
+ *(data++) = (unsigned char) strtoul(hex, NULL, 16);
+ } while (*key != 0);
+ }
+
+ return wl_bssiovar_set(interface, "wsec_key", vif, &wsec_key, sizeof(wsec_key));
+}
+
+static inline int cw2ecw(int cw)
+{
+ int i;
+ for (cw++, i = 0; cw; i++) cw >>=1;
+ return i - 1;
+}
+
+static int wlc_wme_ac(wlc_param param, void *data, void *value)
+{
+ char *type = *((char **) data);
+ char *settings = (char *) value;
+ char cmd[100], *p, *val;
+ edcf_acparam_t params[AC_COUNT];
+ int ret;
+ int intval;
+ int cur = -1;
+ char *buf = wlbuf;
+
+ if ((param & PARAM_MODE) != SET)
+ return -1;
+
+ memset(params, 0, sizeof(params));
+ ret = wl_iovar_get(interface, type, params, sizeof(params));
+ memset(buf, 0, BUFSIZE);
+ strcpy(buf, type);
+ buf += strlen(buf) + 1;
+
+ foreach(cmd, settings, p) {
+ val = strchr(cmd, '=');
+ if (val == NULL) {
+ if (strcmp(cmd, "be") == 0)
+ cur = AC_BE;
+ else if (strcmp(cmd, "bk") == 0)
+ cur = AC_BK;
+ else if (strcmp(cmd, "vi") == 0)
+ cur = AC_VI;
+ else if (strcmp(cmd, "vo") == 0)
+ cur = AC_VO;
+ else
+ return -1;
+
+ /* just in case */
+ params[cur].ACI = (params[cur].ACI & (0x3 << 5)) | (cur << 5);
+ } else {
+ *(val++) = 0;
+
+ intval = strtoul(val, NULL, 10);
+ if (strcmp(cmd, "cwmin") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf)) | cw2ecw(intval);
+ else if (strcmp(cmd, "ecwmin") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf)) | (intval & 0xf);
+ else if (strcmp(cmd, "cwmax") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | (cw2ecw(intval) << 4);
+ else if (strcmp(cmd, "ecwmax") == 0)
+ params[cur].ECW = (params[cur].ECW & ~(0xf << 4)) | ((intval & 0xf) << 4);
+ else if (strcmp(cmd, "aifsn") == 0)
+ params[cur].ACI = (params[cur].ACI & ~(0xf)) | (intval & 0xf);
+ else if (strcmp(cmd, "txop") == 0)
+ params[cur].TXOP = intval >> 5;
+ else if (strcmp(cmd, "force") == 0)
+ params[cur].ACI = (params[cur].ACI & ~(1 << 4)) | ((intval) ? (1 << 4) : 0);
+ else return -1;
+
+ memcpy(buf, ¶ms[cur], sizeof(edcf_acparam_t));
+ wl_ioctl(interface, WLC_SET_VAR, wlbuf, BUFSIZE);
+ }
+ }
+ return ret;
+}
+
+static const struct wlc_call wlc_calls[] = {
+ {
+ .name = "version",
+ .param = STRING|NOARG,
+ .handler = wlc_string,
+ .data.str = VERSION,
+ .desc = "Version of this program"
+ },
+ {
+ .name = "debug",
+ .param = INT,
+ .handler = wlc_int,
+ .data.ptr = &debug,
+ .desc = "wlc debug level"
+ },
+ {
+ .name = "stdin",
+ .param = NOARG,
+ .handler = wlc_flag,
+ .data.ptr = &fromstdin,
+ .desc = "Accept input from stdin"
+ },
+ {
+ .name = "up",
+ .param = NOARG,
+ .handler = wlc_ioctl,
+ .data.num = WLC_UP,
+ .desc = "Bring the interface up"
+ },
+ {
+ .name = "down",
+ .param = NOARG,
+ .handler = wlc_ioctl,
+ .data.num = WLC_DOWN,
+ .desc = "Bring the interface down"
+ },
+ {
+ .name = "radio",
+ .param = INT,
+ .handler = wlc_radio,
+ .desc = "Radio enabled flag"
+ },
+ {
+ .name = "ap",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_AP << 16) | WLC_SET_AP),
+ .desc = "Access Point mode"
+ },
+ {
+ .name = "mssid",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "mssid",
+ .desc = "Multi-ssid mode"
+ },
+ {
+ .name = "apsta",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "apsta",
+ .desc = "AP+STA mode"
+ },
+ {
+ .name = "infra",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_INFRA << 16) | WLC_SET_INFRA),
+ .desc = "Infrastructure mode"
+ },
+ {
+ .name = "wet",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_WET << 16) | WLC_SET_WET),
+ .desc = "Wireless repeater mode",
+ },
+ {
+ .name = "statimeout",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "sta_retry_time",
+ .desc = "STA connection timeout"
+ },
+ {
+ .name = "country",
+ .param = STRING,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_COUNTRY << 16) | WLC_SET_COUNTRY),
+ .desc = "Country code"
+ },
+ {
+ .name = "channel",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_CHANNEL << 16) | WLC_SET_CHANNEL),
+ .desc = "Channel",
+ },
+ {
+ .name = "vif",
+ .param = INT,
+ .handler = wlc_int,
+ .data.ptr = &vif,
+ .desc = "Current vif index"
+ },
+ {
+ .name = "enabled",
+ .param = INT,
+ .handler = wlc_vif_enabled,
+ .desc = "vif enabled flag"
+ },
+ {
+ .name = "ssid",
+ .param = STRING,
+ .handler = wlc_ssid,
+ .desc = "Interface ESSID"
+ },
+ {
+ .name = "closed",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "closednet",
+ .desc = "Hidden ESSID flag"
+ },
+ {
+ .name = "wsec",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wsec",
+ .desc = "Security mode flags"
+ },
+ {
+ .name = "wepkey",
+ .param = STRING,
+ .handler = wlc_wsec_key,
+ .desc = "Set/Remove WEP keys"
+ },
+ {
+ .name = "wsec_restrict",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wsec_restrict",
+ .desc = "Drop unencrypted traffic"
+ },
+ {
+ .name = "eap_restrict",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "eap_restrict",
+ .desc = "Only allow 802.1X traffic until 802.1X authorized"
+ },
+ {
+ .name = "wpa_auth",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "wpa_auth",
+ .desc = "WPA authentication modes"
+ },
+ {
+ .name = "ap_isolate",
+ .param = INT,
+ .handler = wlc_bssiovar,
+ .data.str = "ap_isolate",
+ .desc = "Isolate connected clients"
+ },
+ {
+ .name = "supplicant",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "sup_wpa",
+ .desc = "Built-in WPA supplicant"
+ },
+ {
+ .name = "maxassoc",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "maxassoc",
+ .desc = "Max. number of associated clients",
+ },
+ {
+ .name = "wme",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wme",
+ .desc = "WME enabled"
+ },
+ {
+ .name = "wme_ac_ap",
+ .param = STRING,
+ .handler = wlc_wme_ac,
+ .data.str = "wme_ac_ap",
+ .desc = "Set WME AC options for AP mode",
+ },
+ {
+ .name = "wme_ac_sta",
+ .param = STRING,
+ .handler = wlc_wme_ac,
+ .data.str = "wme_ac_sta",
+ .desc = "Set WME AC options for STA mode",
+ },
+ {
+ .name = "wme_noack",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wme_noack",
+ .desc = "WME ACK disable request",
+ },
+ {
+ .name = "fragthresh",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "fragthresh",
+ .desc = "Fragmentation threshold",
+ },
+ {
+ .name = "rtsthresh",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "rtsthresh",
+ .desc = "RTS threshold"
+ },
+ {
+ .name = "rxant",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_ANTDIV << 16) | WLC_SET_ANTDIV),
+ .desc = "Rx antenna selection"
+ },
+ {
+ .name = "txant",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_TXANT << 16) | WLC_SET_TXANT),
+ .desc = "Tx antenna selection"
+ },
+ {
+ .name = "dtim",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_DTIMPRD << 16) | WLC_SET_DTIMPRD),
+ .desc = "DTIM period",
+ },
+ {
+ .name = "bcn",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_BCNPRD << 16) | WLC_SET_BCNPRD),
+ .desc = "Beacon interval"
+ },
+ {
+ .name = "frameburst",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_FAKEFRAG << 16) | WLC_SET_FAKEFRAG),
+ .desc = "Framebursting"
+ },
+ {
+ .name = "monitor",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_MONITOR << 16) | WLC_SET_MONITOR),
+ .desc = "Monitor mode"
+ },
+ {
+ .name = "passive",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_PASSIVE << 16) | WLC_SET_PASSIVE),
+ .desc = "Passive mode"
+ },
+ {
+ .name = "macfilter",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_MACMODE << 16) | WLC_SET_MACMODE),
+ .desc = "MAC filter mode (0:disabled, 1:deny, 2:allow)"
+ },
+ {
+ .name = "maclist",
+ .param = STRING,
+ .data.num = ((WLC_GET_MACLIST << 16) | WLC_SET_MACLIST),
+ .handler = wlc_maclist,
+ .desc = "MAC filter list"
+ },
+ {
+ .name = "autowds",
+ .param = INT,
+ .handler = wlc_ioctl,
+ .data.num = ((WLC_GET_LAZYWDS << 16) | WLC_SET_LAZYWDS),
+ .desc = "Automatic WDS"
+ },
+ {
+ .name = "wds",
+ .param = STRING,
+ .data.num = ((WLC_GET_WDSLIST << 16) | WLC_SET_WDSLIST),
+ .handler = wlc_maclist,
+ .desc = "WDS connection list"
+ },
+ {
+ .name = "wdstimeout",
+ .param = INT,
+ .handler = wlc_iovar,
+ .data.str = "wdstimeout",
+ .desc = "WDS link detection timeout"
+ },
+ {
+ .name = "afterburner",
+ .param = INT,
+ .handler = wlc_afterburner,
+ .desc = "Broadcom Afterburner"
+ },
+ {
+ .name = "slottime",
+ .param = INT,
+ .handler = wlc_slottime,
+ .desc = "Slot time (-1 = auto)"
+ },
+ {
+ .name = "txack",
+ .param = INT,
+ .handler = wlc_noack,
+ .desc = "Tx ACK enabled flag"
+ },
+ {
+ .name = "ibss_merge",
+ .param = INT,
+ .handler = wlc_ibss_merge,
+ .desc = "Allow IBSS merge in Ad-Hoc mode"
+ }
+};
+#define wlc_calls_size (sizeof(wlc_calls) / sizeof(struct wlc_call))
+
+static void usage(char *cmd)
+{
+ int i;
+ fprintf(stderr, "Usage: %s <command> [<argument> ...]\n"
+ "\n"
+ "Available commands:\n", cmd);
+ for (i = 0; i < wlc_calls_size; i++) {
+ fprintf(stderr, "\t%-16s\t%s\n", wlc_calls[i].name ?: "", wlc_calls[i].desc ?: "");
+ }
+ fprintf(stderr, "\n");
+ exit(1);
+}
+
+static int do_command(const struct wlc_call *cmd, char *arg)
+{
+ static char buf[BUFSIZE];
+ int set;
+ int ret = 0;
+ char *format, *end;
+ int intval;
+
+ if (debug >= 10) {
+ fprintf(stderr, "do_command %-16s\t'%s'\n", cmd->name, arg);
+ }
+
+ if ((arg == NULL) && ((cmd->param & PARAM_TYPE) != NONE)) {
+ set = 0;
+ ret = cmd->handler(cmd->param | GET, (void *) &cmd->data, (void *) buf);
+ if (ret == 0) {
+ switch(cmd->param & PARAM_TYPE) {
+ case INT:
+ intval = *((int *) buf);
+
+ if (intval > 65535)
+ format = "0x%08x\n";
+ else if (intval > 255)
+ format = "0x%04x\n";
+ else
+ format = "%d\n";
+
+ fprintf(stdout, format, intval);
+ break;
+ case STRING:
+ fprintf(stdout, "%s\n", buf);
+ }
+ }
+ } else { /* SET */
+ set = 1;
+ switch(cmd->param & PARAM_TYPE) {
+ case INT:
+ intval = strtoul(arg, &end, 10);
+ if (end && !(*end)) {
+ memcpy(buf, &intval, sizeof(intval));
+ } else {
+ fprintf(stderr, "%s: Invalid argument\n", cmd->name);
+ return -1;
+ }
+ break;
+ case STRING:
+ strncpy(buf, arg, BUFSIZE);
+ buf[BUFSIZE - 1] = 0;
+ }
+
+ ret = cmd->handler(cmd->param | SET, (void *) &cmd->data, (void *) buf);
+ }
+
+ if ((debug > 0) && (ret != 0))
+ fprintf(stderr, "Command '%s %s' failed: %d\n", (set == 1 ? "set" : "get"), cmd->name, ret);
+
+ return ret;
+}
+
+static struct wlc_call *find_cmd(char *name)
+{
+ int found = 0, i = 0;
+
+ while (!found && (i < wlc_calls_size)) {
+ if (strcmp(name, wlc_calls[i].name) == 0)
+ found = 1;
+ else
+ i++;
+ }
+
+ return (struct wlc_call *) (found ? &wlc_calls[i] : NULL);
+}
+
+int main(int argc, char **argv)
+{
+ static char buf[BUFSIZE];
+ char *s, *s2;
+ char *cmd = argv[0];
+ struct wlc_call *call;
+ int ret = 0;
+
+ if (argc < 2)
+ usage(argv[0]);
+
+ for(interface[2] = '0'; (interface[2] < '3') && (wl_probe(interface) != 0); interface[2]++);
+ if (interface[2] == '3') {
+ fprintf(stderr, "No Broadcom wl interface found!\n");
+ return -1;
+ }
+
+ argv++;
+ argc--;
+ while ((argc > 0) && (argv[0] != NULL)) {
+ if ((call = find_cmd(argv[0])) == NULL) {
+ fprintf(stderr, "Invalid command: %s\n\n", argv[0]);
+ usage(cmd);
+ }
+ if ((argc > 1) && (!(call->param & NOARG))) {
+ ret = do_command(call, argv[1]);
+ argv += 2;
+ argc -= 2;
+ } else {
+ ret = do_command(call, NULL);
+ argv++;
+ argc--;
+ }
+ }
+
+ while (fromstdin && !feof(stdin)) {
+ *buf = 0;
+ fgets(buf, BUFSIZE - 1, stdin);
+
+ if (*buf == 0)
+ continue;
+
+ if ((s = strchr(buf, '\r')) != NULL)
+ *s = 0;
+ if ((s = strchr(buf, '\n')) != NULL)
+ *s = 0;
+
+ s = buf;
+ while (isspace(*s))
+ s++;
+
+ if (!*s)
+ continue;
+
+ if ((s2 = strchr(buf, ' ')) != NULL)
+ *(s2++) = 0;
+
+ while (s2 && isspace(*s2))
+ s2++;
+
+ if ((call = find_cmd(buf)) == NULL) {
+ fprintf(stderr, "Invalid command: %s\n", buf);
+ ret = -1;
+ } else
+ ret = do_command(call, ((call->param & NOARG) ? NULL : s2));
+ }
+
+ return ret;
+}
projects / lede.git / commitdiff