--- /dev/null
+#include <linux/io.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/iomux.h>
+#include <mach/cru.h>
+#include <asm/io.h>
+#include <mach/gpio.h>
+
+#define cru_readl(offset) readl_relaxed(RK30_CRU_BASE + offset)
+#define cru_writel(v, offset) do { writel_relaxed(v, RK30_CRU_BASE + offset); dsb(); } while (0)
+
+#if defined(CONFIG_RK30_I2C_INSRAM)
+
+/******************need set when you use i2c*************************/
+#define I2C_SPEED 100
+#define I2C_SADDR (0x2D) /* slave address ,wm8310 addr is 0x34*/
+#define SRAM_I2C_CH 1 //CH==0, i2c0,CH==1, i2c1,CH==2, i2c2,CH==3, i2c3
+#define SRAM_I2C_ADDRBASE (RK30_I2C1_BASE + SZ_4K )//RK29_I2C0_BASE\RK29_I2C2_BASE\RK29_I2C3_BASE
+#define I2C_SLAVE_ADDR_LEN 1 // 2:slav addr is 10bit ,1:slav addr is 7bit
+#define I2C_SLAVE_REG_LEN 1 // 2:slav reg addr is 16 bit ,1:is 8 bit
+#define SRAM_I2C_DATA_BYTE 1 //i2c transmission data is 1bit(8wei) or 2bit(16wei)
+#define GRF_GPIO_IOMUX 0xd4 //GRF_GPIO2D_IOMUX
+/*ch=0:GRF_GPIO2L_IOMUX,ch=1:GRF_GPIO1L_IOMUX,ch=2:GRF_GPIO5H_IOMUX,ch=3:GRF_GPIO2L_IOMUX*/
+#define I2C_GRF_GPIO_IOMUX (0x01<<14)|(0x01<<12)
+/*CH=0:(~(0x03<<30))&(~(0x03<<28))|(0x01<<30)|(0x01<<28),CH=1:(~(0x03<<14))&(~(0x03<<12))|(0x01<<14)|(0x01<<12),
+CH=2:(~(0x03<<24))&(~(0x03<<22))|(0x01<<24)|(0x01<<22),CH=3:(~(0x03<<26))&(~(0x03<<24))|(0x02<<26)|(0x02<<24)*/
+/***************************************/
+
+#define I2C_SLAVE_TYPE (((I2C_SLAVE_ADDR_LEN-1)<<4)|((I2C_SLAVE_REG_LEN-1)))
+
+#define uint8 unsigned char
+#define uint16 unsigned short
+#define uint32 unsigned int
+uint32 __sramdata data[5];
+
+#define CRU_CLKGATE0_CON 0xd0
+#define CRU_CLKGATE8_CON 0xf0
+#define CRU_CLKSEL1_CON 0x48
+#define GRF_GPIO5H_IOMUX 0x74
+#define GRF_GPIO2L_IOMUX 0x58
+#define GRF_GPIO1L_IOMUX 0x50
+
+#define COMPLETE_READ (1<<STATE_START|1<<STATE_READ|1<<STATE_STOP)
+#define COMPLETE_WRITE (1<<STATE_START|1<<STATE_WRITE|1<<STATE_STOP)
+
+/* Control register */
+#define I2C_CON 0x0000
+#define I2C_CON_EN (1 << 0)
+#define I2C_CON_MOD(mod) ((mod) << 1)
+#define I2C_CON_MASK (3 << 1)
+enum{
+ I2C_CON_MOD_TX = 0,
+ I2C_CON_MOD_TRX,
+ I2C_CON_MOD_RX,
+ I2C_CON_MOD_RRX,
+};
+#define I2C_CON_START (1 << 3)
+#define I2C_CON_STOP (1 << 4)
+#define I2C_CON_LASTACK (1 << 5)
+#define I2C_CON_ACTACK (1 << 6)
+
+/* Clock dividor register */
+#define I2C_CLKDIV 0x0004
+#define I2C_CLKDIV_VAL(divl, divh) (((divl) & 0xffff) | (((divh) << 16) & 0xffff0000))
+#define rk30_ceil(x, y) \
+ ({ unsigned long __x = (x), __y = (y); (__x + __y - 1) / __y; })
+
+/* the slave address accessed for master rx mode */
+#define I2C_MRXADDR 0x0008
+#define I2C_MRXADDR_LOW (1 << 24)
+#define I2C_MRXADDR_MID (1 << 25)
+#define I2C_MRXADDR_HIGH (1 << 26)
+
+/* the slave register address accessed for master rx mode */
+#define I2C_MRXRADDR 0x000c
+#define I2C_MRXRADDR_LOW (1 << 24)
+#define I2C_MRXRADDR_MID (1 << 25)
+#define I2C_MRXRADDR_HIGH (1 << 26)
+
+/* master tx count */
+#define I2C_MTXCNT 0x0010
+
+/* master rx count */
+#define I2C_MRXCNT 0x0014
+
+/* interrupt enable register */
+#define I2C_IEN 0x0018
+#define I2C_BTFIEN (1 << 0)
+#define I2C_BRFIEN (1 << 1)
+#define I2C_MBTFIEN (1 << 2)
+#define I2C_MBRFIEN (1 << 3)
+#define I2C_STARTIEN (1 << 4)
+#define I2C_STOPIEN (1 << 5)
+#define I2C_NAKRCVIEN (1 << 6)
+#define IRQ_MST_ENABLE (I2C_MBTFIEN | I2C_MBRFIEN | I2C_NAKRCVIEN | I2C_STARTIEN | I2C_STOPIEN)
+#define IRQ_ALL_DISABLE 0
+
+/* interrupt pending register */
+#define I2C_IPD 0x001c
+#define I2C_BTFIPD (1 << 0)
+#define I2C_BRFIPD (1 << 1)
+#define I2C_MBTFIPD (1 << 2)
+#define I2C_MBRFIPD (1 << 3)
+#define I2C_STARTIPD (1 << 4)
+#define I2C_STOPIPD (1 << 5)
+#define I2C_NAKRCVIPD (1 << 6)
+#define I2C_IPD_ALL_CLEAN 0x7f
+
+/* finished count */
+#define I2C_FCNT 0x0020
+
+/* I2C tx data register */
+#define I2C_TXDATA_BASE 0X0100
+
+/* I2C rx data register */
+#define I2C_RXDATA_BASE 0x0200
+
+void __sramfunc sram_i2c_enable(void);
+void __sramfunc sram_i2c_disenable(void);
+
+void __sramfunc sram_printch(char byte);
+void __sramfunc sram_printhex(unsigned int hex);
+
+#define sram_udelay(usecs) SRAM_LOOP((usecs)*SRAM_LOOPS_PER_USEC)
+
+/*-------------------------------------------------------------------------------------------------------
+Name : sram_i2c_init
+Desc : initialize the necessary registers
+Params : channel-determine which I2C bus we used
+Return : none
+------------------------------------------------------------------------------------------------------*/
+
+void __sramfunc sram_i2c_init()
+{
+ unsigned int div, divl, divh;
+ //enable cru_clkgate8 clock
+ data[1] = cru_readl(CLK_GATE_CLKID_CONS(CLK_GATE_CLKID(8)));
+
+ cru_writel(CLK_GATE_W_MSK(CLK_GATE_PCLK_I2C1)|CLK_UN_GATE(CLK_GATE_PCLK_I2C1),
+ CLK_GATE_CLKID_CONS(CLK_GATE_PCLK_I2C1));
+
+ data[2] = readl_relaxed(RK30_GRF_BASE + GRF_GPIO_IOMUX);
+ writel_relaxed(data[2]| I2C_GRF_GPIO_IOMUX, RK30_GRF_BASE + GRF_GPIO_IOMUX);
+
+ div = rk30_ceil(24*1000*1000, I2C_SPEED*1000 * 8);
+ divh = divl = rk30_ceil(div, 2);
+ writel_relaxed(I2C_CLKDIV_VAL(divl, divh), SRAM_I2C_ADDRBASE + I2C_CLKDIV);
+ data[3] = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_CLKDIV);
+ sram_printhex(data[3]);
+}
+
+
+/*-------------------------------------------------------------------------------------------------------
+Name : sram_i2c_deinit
+Desc : de-initialize the necessary registers
+Params : noe
+Return : none
+------------------------------------------------------------------------------------------------------*/
+void __sramfunc sram_i2c_deinit(void)
+{
+ //restore iomux reg
+ writel_relaxed(data[2], RK30_GRF_BASE + GRF_GPIO_IOMUX);
+
+ //restore scu clock reg
+ cru_writel(data[1], CLK_GATE_CLKID_CONS(CLK_GATE_PCLK_I2C1));
+
+
+}
+
+/*-------------------------------------------------------------------------------------------------------
+Name : sram_i2c_start
+Desc : start i2c
+Params : none
+Return : none
+------------------------------------------------------------------------------------------------------*/
+void __sramfunc sram_i2c_read_enable(void)
+{
+ writel_relaxed(((((I2C_CON_EN | I2C_CON_MOD(1)) | I2C_CON_LASTACK) )| I2C_CON_START) & (~(I2C_CON_STOP)) , SRAM_I2C_ADDRBASE + I2C_CON);
+}
+void __sramfunc sram_i2c_write_enable(void)
+{
+ writel_relaxed(((((I2C_CON_EN | I2C_CON_MOD(0)) | I2C_CON_LASTACK) )| I2C_CON_START) & (~(I2C_CON_STOP)) , SRAM_I2C_ADDRBASE + I2C_CON);
+}
+
+void __sramfunc sram_i2c_disenable(void)
+{
+ writel_relaxed(0, SRAM_I2C_ADDRBASE + I2C_CON);
+}
+
+void __sramfunc sram_i2c_clean_start(void)
+{
+ unsigned int con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_CON);
+
+ con = (con & (~I2C_CON_START)) ;
+ writel_relaxed(con, SRAM_I2C_ADDRBASE + I2C_CON);
+}
+void __sramfunc sram_i2c_send_start(void)
+{
+ unsigned int con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_CON);
+ con |= I2C_CON_START;
+ if(con & I2C_CON_STOP)
+ sram_printch('E');
+ writel_relaxed(con, SRAM_I2C_ADDRBASE + I2C_CON);
+}
+void __sramfunc sram_i2c_send_stop(void)
+{
+ unsigned int con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_CON);
+ con &= ~I2C_CON_START;
+ con |= I2C_CON_STOP;
+ if(con & I2C_CON_START)
+ sram_printch('E');
+ writel_relaxed(con, SRAM_I2C_ADDRBASE + I2C_CON);
+}
+void __sramfunc sram_i2c_clean_stop(void)
+{
+ unsigned int con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_CON);
+
+ con = (con & (~I2C_CON_STOP)) ;
+ writel_relaxed(con, SRAM_I2C_ADDRBASE + I2C_CON);
+}
+
+void __sramfunc sram_i2c_get_ipd_event(int type)
+{
+ int time = 2000;
+ unsigned int con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_IPD);
+ writel_relaxed(type, SRAM_I2C_ADDRBASE + I2C_IEN);
+ do{
+ sram_udelay(10);
+ con = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_IPD);
+ }while(((--time) & (~(con & type))));
+ writel_relaxed(type,SRAM_I2C_ADDRBASE + I2C_IPD);
+
+ if(time <= 0){
+ sram_printch('T');
+ }
+}
+
+void __sramfunc sram_i2c_write_prepare(uint8 I2CSlaveAddr, uint8 regAddr,uint8 pdata)
+{
+ u32 data = 0;
+ unsigned int addr = (I2CSlaveAddr & 0x7f) << 1;
+
+ data = (addr | (regAddr << 8))|(pdata << 16);
+ writel_relaxed(data , SRAM_I2C_ADDRBASE + I2C_TXDATA_BASE);
+ writel_relaxed(3, SRAM_I2C_ADDRBASE + I2C_MTXCNT);
+}
+uint8 __sramfunc sram_i2c_read_prepare(uint8 I2CSlaveAddr, uint8 regAddr)
+{
+ unsigned int addr = (I2CSlaveAddr & 0x7f) << 1;
+
+ writel_relaxed(addr | I2C_MRXADDR_LOW, SRAM_I2C_ADDRBASE + I2C_MRXADDR);
+ writel_relaxed(regAddr | I2C_MRXADDR_LOW, SRAM_I2C_ADDRBASE + I2C_MRXRADDR);
+ writel_relaxed(SRAM_I2C_DATA_BYTE, SRAM_I2C_ADDRBASE + I2C_MRXCNT);
+ return 0;
+}
+
+uint8 __sramfunc sram_i2c_read_get_data(uint8 I2CSlaveAddr, uint8 regAddr)
+{
+ unsigned int ret;
+ ret = readl_relaxed(SRAM_I2C_ADDRBASE + I2C_RXDATA_BASE);
+ ret = ret & 0x000000ff;
+ return ret;
+
+}
+uint8 __sramfunc sram_i2c_write(uint8 I2CSlaveAddr, uint8 regAddr,uint8 data)
+{
+ sram_i2c_write_enable();
+ sram_i2c_get_ipd_event(I2C_STARTIPD);
+ sram_i2c_clean_start();
+
+ sram_i2c_write_prepare(I2CSlaveAddr,regAddr,data);
+ sram_i2c_get_ipd_event(I2C_MBTFIPD);
+
+ sram_i2c_send_stop();
+ sram_i2c_get_ipd_event(I2C_STOPIPD);
+ sram_i2c_clean_stop();
+ sram_i2c_disenable();
+ return 0;
+
+}
+
+uint8 __sramfunc sram_i2c_read(uint8 I2CSlaveAddr, uint8 regAddr)
+{
+ unsigned int data;
+ sram_i2c_read_enable();
+ sram_i2c_get_ipd_event(I2C_STARTIPD);
+ sram_i2c_clean_start();
+
+ sram_i2c_read_prepare(I2CSlaveAddr,regAddr);
+ sram_i2c_get_ipd_event(I2C_MBRFIPD);
+
+ data = sram_i2c_read_get_data(I2CSlaveAddr,regAddr);
+
+ sram_i2c_send_stop();
+ sram_i2c_get_ipd_event(I2C_STOPIPD);
+ sram_i2c_clean_stop();
+ sram_i2c_disenable();
+ return data;
+}
+
+void __sramfunc rk30_suspend_voltage_set(unsigned int vol)
+{
+ uint8 slaveaddr;
+ uint16 slavereg;
+ uint8 data,ret;
+ slaveaddr = I2C_SADDR; //slave device addr
+ slavereg = 0x22; // reg addr
+ data = 0x23; //set arm 1.0v
+
+ sram_i2c_init(); //init i2c device
+// ret = sram_i2c_read(slaveaddr, slavereg);
+// sram_printhex(ret);
+ sram_i2c_write(slaveaddr, slavereg, data);//
+ sram_i2c_deinit(); //deinit i2c device
+
+}
+
+void __sramfunc rk30_suspend_voltage_resume(unsigned int vol)
+{
+ uint8 slaveaddr;
+ uint16 slavereg;
+ uint8 data,ret;
+ slaveaddr = I2C_SADDR; //slave device addr
+ slavereg = 0x22; // reg addr
+ data = 0x2b;
+
+ sram_i2c_init(); //init i2c device
+// ret = sram_i2c_read(slaveaddr, slavereg);
+ sram_i2c_write(slaveaddr, slavereg, data);
+ sram_i2c_deinit(); //deinit i2c device
+}
+#else
+void __sramfunc rk30_suspend_voltage_set(unsigned int vol)
+{
+
+}
+void __sramfunc rk30_suspend_voltage_resume(unsigned int vol)
+{
+
+}
+#endif
+
+
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff