ARM: Auto calculate ZRELADDR and provide option for exceptions

As long as the zImage is placed within the 128MB range from the start of
memory, ZRELADDR (Address where the decompressed kernel will be placed,
usually == PHYS_OFFSET + TEXT_OFFSET) can be determined at run-time by
masking PC with 0xf80000000.

Running through all the Makefile.boot, all those zreladdr-y
addresses == 0x[0-f][08]00_0000 + TEXT_OFFSET can be determined at
run-time.

Option CONFIG_AUTO_ZRELADDR and CONFIG_ZRELADDR are introduced,
CONFIG_ZRELADDR _must_ be explicitly specified if:

- ((zreladdr-y - TEXT_OFFSET) & ~0xf8000000) != 0, which means
  masking PC with 0xf8000000 will result in an incorrect address.
  Currently this is only a problem on u300.

- or the assumption of the zImage being loaded by the bootloader within
  the first 128MB of RAM is incorrect

- or when ZBOOT_ROM is used, where the above assumption is usually wrong.

[ukleinek: changed mask from 0xf0000000 to 0xf8000000 for mx1 and shark
+ some review fixes from the mailing list]

Original-Idea-and-Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Eric Miao <eric.miao@canonical.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a53ac6570b66700fca4d97d94dadd80bfb9017f9..0b0cf0d2872f66b15aad4ebdff80b75e30750f1a 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1490,6 +1490,105 @@ config ATAGS_PROC
          Should the atags used to boot the kernel be exported in an "atags"
          file in procfs. Useful with kexec.
 
+config AUTO_ZRELADDR
+       bool "Auto calculation of the decompressed kernel image address"
+       depends on !ZBOOT_ROM && !ARCH_U300
+       help
+         ZRELADDR is the physical address where the decompressed kernel
+         image will be placed. If AUTO_ZRELADDR is selected, the address
+         will be determined at run-time by masking the current IP with
+         0xf8000000. This assumes the zImage being placed in the first 128MB
+         from start of memory.
+
+config ZRELADDR
+       hex "Physical address of the decompressed kernel image"
+       depends on !AUTO_ZRELADDR
+       default 0x00008000 if ARCH_BCMRING ||\
+               ARCH_CNS3XXX ||\
+               ARCH_DOVE ||\
+               ARCH_EBSA110 ||\
+               ARCH_FOOTBRIDGE ||\
+               ARCH_INTEGRATOR ||\
+               ARCH_IOP13XX ||\
+               ARCH_IOP33X ||\
+               ARCH_IXP2000 ||\
+               ARCH_IXP23XX ||\
+               ARCH_IXP4XX ||\
+               ARCH_KIRKWOOD ||\
+               ARCH_KS8695 ||\
+               ARCH_LOKI ||\
+               ARCH_MMP ||\
+               ARCH_MV78XX0 ||\
+               ARCH_NOMADIK ||\
+               ARCH_NUC93X ||\
+               ARCH_NS9XXX ||\
+               ARCH_ORION5X ||\
+               ARCH_SPEAR3XX ||\
+               ARCH_SPEAR6XX ||\
+               ARCH_U8500 ||\
+               ARCH_VERSATILE ||\
+               ARCH_W90X900
+       default 0x08008000 if ARCH_MX1 ||\
+               ARCH_SHARK
+       default 0x10008000 if ARCH_MSM ||\
+               ARCH_OMAP1 ||\
+               ARCH_RPC
+       default 0x20008000 if ARCH_S5P6440 ||\
+               ARCH_S5P6442 ||\
+               ARCH_S5PC100 ||\
+               ARCH_S5PV210
+       default 0x30008000 if ARCH_S3C2410 ||\
+               ARCH_S3C2400 ||\
+               ARCH_S3C2412 ||\
+               ARCH_S3C2416 ||\
+               ARCH_S3C2440 ||\
+               ARCH_S3C2443
+       default 0x40008000 if ARCH_STMP378X ||\
+               ARCH_STMP37XX ||\
+               ARCH_SH7372 ||\
+               ARCH_SH7377
+       default 0x50008000 if ARCH_S3C64XX ||\
+               ARCH_SH7367
+       default 0x60008000 if ARCH_VEXPRESS
+       default 0x80008000 if ARCH_MX25 ||\
+               ARCH_MX3 ||\
+               ARCH_NETX ||\
+               ARCH_OMAP2PLUS ||\
+               ARCH_PNX4008
+       default 0x90008000 if ARCH_MX5 ||\
+               ARCH_MX91231
+       default 0xa0008000 if ARCH_IOP32X ||\
+               ARCH_PXA ||\
+               MACH_MX27
+       default 0xc0008000 if ARCH_LH7A40X ||\
+               MACH_MX21
+       default 0xf0008000 if ARCH_AAEC2000 ||\
+               ARCH_L7200
+       default 0xc0028000 if ARCH_CLPS711X
+       default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+       default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
+       default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
+       default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
+       default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
+       default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
+       default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
+       default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
+       default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+       default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
+       default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
+       default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
+       default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
+       default 0xc0208000 if ARCH_SA1100 && SA1111
+       default 0xc0008000 if ARCH_SA1100 && !SA1111
+       default 0x30108000 if ARCH_S3C2410 && PM_H1940
+       default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
+       default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
+       help
+         ZRELADDR is the physical address where the decompressed kernel
+         image will be placed. ZRELADDR has to be specified when the
+         assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
+         selected.
+
 endmenu
 
 menu "CPU Power Management"

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4113e2af044ea1764aeb0681ad7f50a74c..f705213caa881af9c07e181c0d2a3a1a26a5d98a 100644 (file)
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,18 +14,16 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
-include $(srctree)/$(MACHINE)/Makefile.boot
+-include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+export INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -67,7 +65,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(ZRELADDR)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 2a80c9de6eafb9e11745d78ddc230fe15b3411b4..cc8380b879fefca2c4c6a35b900867fc7256c030 100644 (file)
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD   = head.o
 OBJS   = misc.o decompress.o
 FONTC  = $(srctree)/drivers/video/console/font_acorn_8x8.c
@@ -79,8 +80,6 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
-# Supply ZRELADDR to the decompressor via a linker symbol.
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d27faa131796d6f7fa058830dca862a6375ea336..abf4d65acf6243de88d3a0df342afabce87436e2 100644 (file)
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -170,9 +170,16 @@ not_angel:
 
                .text
                adr     r0, LC0
- ARM(          ldmia   r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
- THUMB(                ldmia   r0, {r1, r2, r3, r4, r5, r6, r11, ip}   )
+ ARM(          ldmia   r0, {r1, r2, r3, r5, r6, r11, ip, sp})
+ THUMB(                ldmia   r0, {r1, r2, r3, r5, r6, r11, ip}       )
  THUMB(                ldr     sp, [r0, #32]                           )
+#ifdef CONFIG_AUTO_ZRELADDR
+               @ determine final kernel image address
+               and     r4, pc, #0xf8000000
+               add     r4, r4, #TEXT_OFFSET
+#else
+               ldr     r4, =CONFIG_ZRELADDR
+#endif
                subs    r0, r0, r1              @ calculate the delta offset
 
                                                @ if delta is zero, we are
@@ -310,7 +317,6 @@ wont_overwrite:     mov     r0, r4
 LC0:           .word   LC0                     @ r1
                .word   __bss_start             @ r2
                .word   _end                    @ r3
-               .word   zreladdr                @ r4
                .word   _start                  @ r5
                .word   _image_size             @ r6
                .word   _got_start              @ r11