rt2x00: Fix rt2800 txpower setting to correct value
authorRA-Jay Hung <Jay_Hung@ralinktech.com>
Sun, 20 Feb 2011 12:55:25 +0000 (13:55 +0100)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 21 Feb 2011 20:39:59 +0000 (15:39 -0500)
TX_PWR_CFG_* setting need to consider below cases
-compesate 20M/40M tx power delta for 2.4/5GHZ band
-limit maximum EIRP tx power to power_level of
 regulatory requirement

Signed-off-by: RA-Jay Hung <jay_hung@ralinktech.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2800.h
drivers/net/wireless/rt2x00/rt2800lib.c
drivers/net/wireless/rt2x00/rt2x00.h

index ef8f605d108188815cb721ccef0b521ecde557cb..457887c85937a1bd9e0665f0c0a343e179abd4c8 100644 (file)
@@ -1703,11 +1703,14 @@ struct mac_iveiv_entry {
  */
 
 /*
- * BBP 1: TX Antenna & Power
- * POWER: 0 - normal, 1 - drop tx power by 6dBm, 2 - drop tx power by 12dBm,
- *     3 - increase tx power by 6dBm
- */
-#define BBP1_TX_POWER                  FIELD8(0x07)
+ * BBP 1: TX Antenna & Power Control
+ * POWER_CTRL:
+ * 0 - normal,
+ * 1 - drop tx power by 6dBm,
+ * 2 - drop tx power by 12dBm,
+ * 3 - increase tx power by 6dBm
+ */
+#define BBP1_TX_POWER_CTRL             FIELD8(0x07)
 #define BBP1_TX_ANTENNA                        FIELD8(0x18)
 
 /*
@@ -2001,23 +2004,26 @@ struct mac_iveiv_entry {
 #define EEPROM_RSSI_A2_LNA_A2          FIELD16(0xff00)
 
 /*
- * EEPROM Maximum TX power values
+ * EEPROM EIRP Maximum TX power values(unit: dbm)
  */
-#define EEPROM_MAX_TX_POWER            0x0027
-#define EEPROM_MAX_TX_POWER_24GHZ      FIELD16(0x00ff)
-#define EEPROM_MAX_TX_POWER_5GHZ       FIELD16(0xff00)
+#define EEPROM_EIRP_MAX_TX_POWER       0x0027
+#define EEPROM_EIRP_MAX_TX_POWER_2GHZ  FIELD16(0x00ff)
+#define EEPROM_EIRP_MAX_TX_POWER_5GHZ  FIELD16(0xff00)
 
 /*
  * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
  * This is delta in 40MHZ.
- * VALUE: Tx Power dalta value (MAX=4)
+ * VALUE: Tx Power dalta value, MAX=4(unit: dbm)
  * TYPE: 1: Plus the delta value, 0: minus the delta value
- * TXPOWER: Enable:
+ * ENABLE: enable tx power compensation for 40BW
  */
 #define EEPROM_TXPOWER_DELTA           0x0028
-#define EEPROM_TXPOWER_DELTA_VALUE     FIELD16(0x003f)
-#define EEPROM_TXPOWER_DELTA_TYPE      FIELD16(0x0040)
-#define EEPROM_TXPOWER_DELTA_TXPOWER   FIELD16(0x0080)
+#define EEPROM_TXPOWER_DELTA_VALUE_2G  FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE_2G   FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_ENABLE_2G FIELD16(0x0080)
+#define EEPROM_TXPOWER_DELTA_VALUE_5G  FIELD16(0x3f00)
+#define EEPROM_TXPOWER_DELTA_TYPE_5G   FIELD16(0x4000)
+#define EEPROM_TXPOWER_DELTA_ENABLE_5G FIELD16(0x8000)
 
 /*
  * EEPROM TXPOWER 802.11BG
@@ -2215,4 +2221,9 @@ struct mac_iveiv_entry {
 #define TXPOWER_A_TO_DEV(__txpower) \
        clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
 
+/*
+ *  Board's maximun TX power limitation
+ */
+#define EIRP_MAX_TX_POWER_LIMIT        0x50
+
 #endif /* RT2800_H */
index c62b4a593eb8584bb542e89f284b4d5d82482b3b..ab41f9e18ca9ea6f4ebcf9a49ad22e9f3fb79bd5 100644 (file)
@@ -1684,30 +1684,116 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
        rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
 }
 
+static int rt2800_get_txpower_bw_comp(struct rt2x00_dev *rt2x00dev,
+                                     enum ieee80211_band band)
+{
+       u16 eeprom;
+       u8 comp_en;
+       u8 comp_type;
+       int comp_value;
+
+       rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_DELTA, &eeprom);
+
+       if (eeprom == 0xffff)
+               return 0;
+
+       if (band == IEEE80211_BAND_2GHZ) {
+               comp_en = rt2x00_get_field16(eeprom,
+                                EEPROM_TXPOWER_DELTA_ENABLE_2G);
+               if (comp_en) {
+                       comp_type = rt2x00_get_field16(eeprom,
+                                          EEPROM_TXPOWER_DELTA_TYPE_2G);
+                       comp_value = rt2x00_get_field16(eeprom,
+                                           EEPROM_TXPOWER_DELTA_VALUE_2G);
+                       if (!comp_type)
+                               comp_value = -comp_value;
+               }
+       } else {
+               comp_en = rt2x00_get_field16(eeprom,
+                                EEPROM_TXPOWER_DELTA_ENABLE_5G);
+               if (comp_en) {
+                       comp_type = rt2x00_get_field16(eeprom,
+                                          EEPROM_TXPOWER_DELTA_TYPE_5G);
+                       comp_value = rt2x00_get_field16(eeprom,
+                                           EEPROM_TXPOWER_DELTA_VALUE_5G);
+                       if (!comp_type)
+                               comp_value = -comp_value;
+               }
+       }
+
+       return comp_value;
+}
+
+static u8 rt2800_compesate_txpower(struct rt2x00_dev *rt2x00dev,
+                                    int is_rate_b,
+                                    enum ieee80211_band band,
+                                    int power_level,
+                                    u8 txpower)
+{
+       u32 reg;
+       u16 eeprom;
+       u8 criterion;
+       u8 eirp_txpower;
+       u8 eirp_txpower_criterion;
+       u8 reg_limit;
+       int bw_comp = 0;
+
+       if (!((band == IEEE80211_BAND_5GHZ) && is_rate_b))
+               return txpower;
+
+       if (test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+               bw_comp = rt2800_get_txpower_bw_comp(rt2x00dev, band);
+
+       if (test_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags)) {
+               /*
+                * Check if eirp txpower exceed txpower_limit.
+                * We use OFDM 6M as criterion and its eirp txpower
+                * is stored at EEPROM_EIRP_MAX_TX_POWER.
+                * .11b data rate need add additional 4dbm
+                * when calculating eirp txpower.
+                */
+               rt2800_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+               criterion = rt2x00_get_field32(reg, TX_PWR_CFG_0_6MBS);
+
+               rt2x00_eeprom_read(rt2x00dev,
+                                  EEPROM_EIRP_MAX_TX_POWER, &eeprom);
+
+               if (band == IEEE80211_BAND_2GHZ)
+                       eirp_txpower_criterion = rt2x00_get_field16(eeprom,
+                                                EEPROM_EIRP_MAX_TX_POWER_2GHZ);
+               else
+                       eirp_txpower_criterion = rt2x00_get_field16(eeprom,
+                                                EEPROM_EIRP_MAX_TX_POWER_5GHZ);
+
+               eirp_txpower = eirp_txpower_criterion + (txpower - criterion) +
+                                      (is_rate_b ? 4 : 0) + bw_comp;
+
+               reg_limit = (eirp_txpower > power_level) ?
+                                       (eirp_txpower - power_level) : 0;
+       } else
+               reg_limit = 0;
+
+       return txpower + bw_comp - reg_limit;
+}
+
 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
-                                 const int max_txpower)
+                                 struct ieee80211_conf *conf)
 {
        u8 txpower;
-       u8 max_value = (u8)max_txpower;
        u16 eeprom;
-       int i;
+       int i, is_rate_b;
        u32 reg;
        u8 r1;
        u32 offset;
+       enum ieee80211_band band = conf->channel->band;
+       int power_level = conf->power_level;
 
        /*
-        * set to normal tx power mode: +/- 0dBm
+        * set to normal bbp tx power control mode: +/- 0dBm
         */
        rt2800_bbp_read(rt2x00dev, 1, &r1);
-       rt2x00_set_field8(&r1, BBP1_TX_POWER, 0);
+       rt2x00_set_field8(&r1, BBP1_TX_POWER_CTRL, 0);
        rt2800_bbp_write(rt2x00dev, 1, r1);
-
-       /*
-        * The eeprom contains the tx power values for each rate. These
-        * values map to 100% tx power. Each 16bit word contains four tx
-        * power values and the order is the same as used in the TX_PWR_CFG
-        * registers.
-        */
        offset = TX_PWR_CFG_0;
 
        for (i = 0; i < EEPROM_TXPOWER_BYRATE_SIZE; i += 2) {
@@ -1721,73 +1807,99 @@ static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
                rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i,
                                   &eeprom);
 
-               /* TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
+               is_rate_b = i ? 0 : 1;
+               /*
+                * TX_PWR_CFG_0: 1MBS, TX_PWR_CFG_1: 24MBS,
                 * TX_PWR_CFG_2: MCS4, TX_PWR_CFG_3: MCS12,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE0);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE0, txpower);
 
-               /* TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
+               /*
+                * TX_PWR_CFG_0: 2MBS, TX_PWR_CFG_1: 36MBS,
                 * TX_PWR_CFG_2: MCS5, TX_PWR_CFG_3: MCS13,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE1);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE1, txpower);
 
-               /* TX_PWR_CFG_0: 55MBS, TX_PWR_CFG_1: 48MBS,
+               /*
+                * TX_PWR_CFG_0: 5.5MBS, TX_PWR_CFG_1: 48MBS,
                 * TX_PWR_CFG_2: MCS6,  TX_PWR_CFG_3: MCS14,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE2);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE2, txpower);
 
-               /* TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
+               /*
+                * TX_PWR_CFG_0: 11MBS, TX_PWR_CFG_1: 54MBS,
                 * TX_PWR_CFG_2: MCS7,  TX_PWR_CFG_3: MCS15,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE3);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE3, txpower);
 
                /* read the next four txpower values */
                rt2x00_eeprom_read(rt2x00dev, EEPROM_TXPOWER_BYRATE + i + 1,
                                   &eeprom);
 
-               /* TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
+               is_rate_b = 0;
+               /*
+                * TX_PWR_CFG_0: 6MBS, TX_PWR_CFG_1: MCS0,
                 * TX_PWR_CFG_2: MCS8, TX_PWR_CFG_3: unknown,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE0);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE4, txpower);
 
-               /* TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
+               /*
+                * TX_PWR_CFG_0: 9MBS, TX_PWR_CFG_1: MCS1,
                 * TX_PWR_CFG_2: MCS9, TX_PWR_CFG_3: unknown,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE1);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE5, txpower);
 
-               /* TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
+               /*
+                * TX_PWR_CFG_0: 12MBS, TX_PWR_CFG_1: MCS2,
                 * TX_PWR_CFG_2: MCS10, TX_PWR_CFG_3: unknown,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE2);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE6, txpower);
 
-               /* TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
+               /*
+                * TX_PWR_CFG_0: 18MBS, TX_PWR_CFG_1: MCS3,
                 * TX_PWR_CFG_2: MCS11, TX_PWR_CFG_3: unknown,
-                * TX_PWR_CFG_4: unknown */
+                * TX_PWR_CFG_4: unknown
+                */
                txpower = rt2x00_get_field16(eeprom,
                                             EEPROM_TXPOWER_BYRATE_RATE3);
-               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7,
-                                  min(txpower, max_value));
+               txpower = rt2800_compesate_txpower(rt2x00dev, is_rate_b, band,
+                                            power_level, txpower);
+               rt2x00_set_field32(&reg, TX_PWR_CFG_RATE7, txpower);
 
                rt2800_register_write(rt2x00dev, offset, reg);
 
@@ -1846,11 +1958,13 @@ void rt2800_config(struct rt2x00_dev *rt2x00dev,
        /* Always recalculate LNA gain before changing configuration */
        rt2800_config_lna_gain(rt2x00dev, libconf);
 
-       if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+       if (flags & IEEE80211_CONF_CHANGE_CHANNEL) {
                rt2800_config_channel(rt2x00dev, libconf->conf,
                                      &libconf->rf, &libconf->channel);
+               rt2800_config_txpower(rt2x00dev, libconf->conf);
+       }
        if (flags & IEEE80211_CONF_CHANGE_POWER)
-               rt2800_config_txpower(rt2x00dev, libconf->conf->power_level);
+               rt2800_config_txpower(rt2x00dev, libconf->conf);
        if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
                rt2800_config_retry_limit(rt2x00dev, libconf);
        if (flags & IEEE80211_CONF_CHANGE_PS)
@@ -3040,13 +3154,6 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
                                   default_lna_gain);
        rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
 
-       rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &word);
-       if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_24GHZ) == 0xff)
-               rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_24GHZ, MAX_G_TXPOWER);
-       if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_5GHZ) == 0xff)
-               rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_5GHZ, MAX_A_TXPOWER);
-       rt2x00_eeprom_write(rt2x00dev, EEPROM_MAX_TX_POWER, word);
-
        return 0;
 }
 EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
@@ -3162,6 +3269,15 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
        rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
 #endif /* CONFIG_RT2X00_LIB_LEDS */
 
+       /*
+        * Check if support EIRP tx power limit feature.
+        */
+       rt2x00_eeprom_read(rt2x00dev, EEPROM_EIRP_MAX_TX_POWER, &eeprom);
+
+       if (rt2x00_get_field16(eeprom, EEPROM_EIRP_MAX_TX_POWER_2GHZ) <
+                                       EIRP_MAX_TX_POWER_LIMIT)
+               __set_bit(CONFIG_SUPPORT_POWER_LIMIT, &rt2x00dev->flags);
+
        return 0;
 }
 EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
@@ -3314,7 +3430,6 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
        char *default_power1;
        char *default_power2;
        unsigned int i;
-       unsigned short max_power;
        u16 eeprom;
 
        /*
@@ -3439,26 +3554,21 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
        spec->channels_info = info;
 
-       rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &eeprom);
-       max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_24GHZ);
        default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
        default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
 
        for (i = 0; i < 14; i++) {
-               info[i].max_power = max_power;
-               info[i].default_power1 = TXPOWER_G_FROM_DEV(default_power1[i]);
-               info[i].default_power2 = TXPOWER_G_FROM_DEV(default_power2[i]);
+               info[i].default_power1 = default_power1[i];
+               info[i].default_power2 = default_power2[i];
        }
 
        if (spec->num_channels > 14) {
-               max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_5GHZ);
                default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
                default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
 
                for (i = 14; i < spec->num_channels; i++) {
-                       info[i].max_power = max_power;
-                       info[i].default_power1 = TXPOWER_A_FROM_DEV(default_power1[i]);
-                       info[i].default_power2 = TXPOWER_A_FROM_DEV(default_power2[i]);
+                       info[i].default_power1 = default_power1[i];
+                       info[i].default_power2 = default_power2[i];
                }
        }
 
index fd28836a00726723769c0043b4e94b30601afb87..64c6ef52fe567a0178360380dc4b89147ddca8f8 100644 (file)
@@ -667,6 +667,7 @@ enum rt2x00_flags {
         */
        CONFIG_SUPPORT_HW_BUTTON,
        CONFIG_SUPPORT_HW_CRYPTO,
+       CONFIG_SUPPORT_POWER_LIMIT,
        DRIVER_SUPPORT_CONTROL_FILTERS,
        DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL,
        DRIVER_SUPPORT_PRE_TBTT_INTERRUPT,