mmc: omap_hsmmc: adapt hsmmc to use pbias regulator
authorBalaji T K <balajitk@ti.com>
Wed, 19 Feb 2014 14:56:40 +0000 (20:26 +0530)
committerChris Ball <chris@printf.net>
Tue, 4 Mar 2014 16:44:50 +0000 (11:44 -0500)
In DT case, PBAIS registers are programmed via regulator,
use regulator APIs to control PBIAS.

Signed-off-by: Balaji T K <balajitk@ti.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
drivers/mmc/host/omap_hsmmc.c

index 6f4b6b47c1c09659665a0638d6b3107c1e7e66e8..f46190cfae17a2c7593fad5b01c4d47e8ef457ce 100644 (file)
 #define OMAP_MMC_MAX_CLOCK     52000000
 #define DRIVER_NAME            "omap_hsmmc"
 
+#define VDD_1V8                        1800000         /* 180000 uV */
+#define VDD_3V0                        3000000         /* 300000 uV */
+#define VDD_165_195            (ffs(MMC_VDD_165_195) - 1)
+
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -164,6 +168,8 @@ struct omap_hsmmc_host {
         */
        struct  regulator       *vcc;
        struct  regulator       *vcc_aux;
+       struct  regulator       *pbias;
+       bool                    pbias_enabled;
        int                     pbias_disable;
        void    __iomem         *base;
        resource_size_t         mapbase;
@@ -277,6 +283,15 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
        if (mmc_slot(host).before_set_reg)
                mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
+       if (host->pbias) {
+               if (host->pbias_enabled == 1) {
+                       ret = regulator_disable(host->pbias);
+                       if (!ret)
+                               host->pbias_enabled = 0;
+               }
+               regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+       }
+
        /*
         * Assume Vcc regulator is used only to power the card ... OMAP
         * VDDS is used to power the pins, optionally with a transceiver to
@@ -311,9 +326,27 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
                }
        }
 
+       if (host->pbias) {
+               if (vdd <= VDD_165_195)
+                       ret = regulator_set_voltage(host->pbias, VDD_1V8,
+                                                               VDD_1V8);
+               else
+                       ret = regulator_set_voltage(host->pbias, VDD_3V0,
+                                                               VDD_3V0);
+               if (ret < 0)
+                       goto error_set_power;
+
+               if (host->pbias_enabled == 0) {
+                       ret = regulator_enable(host->pbias);
+                       if (!ret)
+                               host->pbias_enabled = 1;
+               }
+       }
+
        if (mmc_slot(host).after_set_reg)
                mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
 
+error_set_power:
        return ret;
 }
 
@@ -347,6 +380,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
        reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
        host->vcc_aux = IS_ERR(reg) ? NULL : reg;
 
+       reg = devm_regulator_get_optional(host->dev, "pbias");
+       host->pbias = IS_ERR(reg) ? NULL : reg;
+
        /* For eMMC do not power off when not in sleep state */
        if (mmc_slot(host).no_regulator_off_init)
                return 0;
@@ -1831,6 +1867,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
        host->base      = ioremap(host->mapbase, SZ_4K);
        host->power_mode = MMC_POWER_OFF;
        host->next_data.cookie = 1;
+       host->pbias_enabled = 0;
 
        platform_set_drvdata(pdev, host);