+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32.27
-# Fri Oct 28 10:41:46 2011
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_HAVE_SCHED_CLOCK=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-CONFIG_CONSTRUCTORS=y
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZO=y
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_LZMA is not set
-CONFIG_KERNEL_LZO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_TREE_RCU=y
-# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_RCU_TRACE is not set
-CONFIG_RCU_FANOUT=32
-# CONFIG_RCU_FANOUT_EXACT is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_DEBUG=y
-# CONFIG_CGROUP_NS is not set
-CONFIG_CGROUP_FREEZER=y
-# CONFIG_CGROUP_DEVICE is not set
-# CONFIG_CPUSETS is not set
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-# CONFIG_CGROUP_MEM_RES_CTLR is not set
-CONFIG_CGROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_PANIC_TIMEOUT=5
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_ASHMEM=y
-CONFIG_AIO=y
-
-#
-# Kernel Performance Events And Counters
-#
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-
-#
-# GCOV-based kernel profiling
-#
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_FREEZER=y
-
-#
-# System Type
-#
-CONFIG_MMU=y
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_STMP3XXX is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PC1XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-CONFIG_ARCH_RK29=y
-# CONFIG_MACH_RK29SDK is not set
-# CONFIG_MACH_RK29SDK_DDR3 is not set
-# CONFIG_MACH_RK29WINACCORD is not set
-# CONFIG_MACH_RK29FIH is not set
-# CONFIG_MACH_RK29_MALATA is not set
-# CONFIG_MACH_RK29_PHONESDK is not set
-# CONFIG_MACH_RK29_A22 is not set
-# CONFIG_MACH_RK29_TD8801 is not set
-CONFIG_MACH_RK29_TD8801_V2=y
-# CONFIG_MACH_RK29_PHONEPADSDK is not set
-# CONFIG_MACH_RK29_newton is not set
-# CONFIG_DDR_TYPE_DDRII is not set
-CONFIG_DDR_TYPE_LPDDR=y
-# CONFIG_DDR_TYPE_DDR3_800D is not set
-# CONFIG_DDR_TYPE_DDR3_800E is not set
-# CONFIG_DDR_TYPE_DDR3_1066E is not set
-# CONFIG_DDR_TYPE_DDR3_1066F is not set
-# CONFIG_DDR_TYPE_DDR3_1066G is not set
-# CONFIG_DDR_TYPE_DDR3_1333F is not set
-# CONFIG_DDR_TYPE_DDR3_1333G is not set
-# CONFIG_DDR_TYPE_DDR3_1333H is not set
-# CONFIG_DDR_TYPE_DDR3_1333J is not set
-# CONFIG_DDR_TYPE_DDR3_1600G is not set
-# CONFIG_DDR_TYPE_DDR3_1600H is not set
-# CONFIG_DDR_TYPE_DDR3_1600J is not set
-# CONFIG_DDR_TYPE_DDR3_1600K is not set
-# CONFIG_DDR_TYPE_DDR3_1866J is not set
-# CONFIG_DDR_TYPE_DDR3_1866K is not set
-# CONFIG_DDR_TYPE_DDR3_1866L is not set
-# CONFIG_DDR_TYPE_DDR3_1866M is not set
-# CONFIG_DDR_TYPE_DDR3_2133K is not set
-# CONFIG_DDR_TYPE_DDR3_2133L is not set
-# CONFIG_DDR_TYPE_DDR3_2133M is not set
-# CONFIG_DDR_TYPE_DDR3_2133N is not set
-# CONFIG_DDR_TYPE_DDR3_DEFAULT is not set
-CONFIG_RK29_MEM_SIZE_M=512
-CONFIG_DDR_SDRAM_FREQ=192
-# CONFIG_DDR_RECONFIG is not set
-CONFIG_WIFI_CONTROL_FUNC=y
-
-#
-# RK29 VPU (Video Processing Unit) support
-#
-CONFIG_RK29_VPU=y
-CONFIG_RK29_VPU_SERVICE=y
-# CONFIG_RK29_VPU_DEBUG is not set
-CONFIG_RK29_JTAG=y
-CONFIG_RK29_LAST_LOG=y
-
-#
-# support for RK29 power manage
-#
-# CONFIG_RK29_WORKING_POWER_MANAGEMENT is not set
-CONFIG_RK29_CLK_SWITCH_TO_32K=y
-CONFIG_RK29_GPIO_SUSPEND=y
-# CONFIG_RK29_SPI_INSRAM is not set
-CONFIG_RK29_I2C_INSRAM=y
-# CONFIG_RK29_CHARGE_EARLYSUSPEND is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_V7=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_HAS_TLS_REG=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-CONFIG_ARM_GIC=y
-CONFIG_PL330=y
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-# CONFIG_KSM is not set
-CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
-
-#
-# CPU Power Management
-#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_NEON=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_HAS_WAKELOCK=y
-CONFIG_HAS_EARLYSUSPEND=y
-CONFIG_WAKELOCK=y
-CONFIG_WAKELOCK_STAT=y
-CONFIG_USER_WAKELOCK=y
-CONFIG_EARLYSUSPEND=y
-# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
-# CONFIG_CONSOLE_EARLYSUSPEND is not set
-CONFIG_FB_EARLYSUSPEND=y
-# CONFIG_APM_EMULATION is not set
-# CONFIG_PM_RUNTIME is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-CONFIG_ANDROID_PARANOID_NETWORK=y
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_RDS is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_BNEP is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_MRVL is not set
-CONFIG_BT_HCIBCM4325=y
-CONFIG_IDBLOCK=y
-# CONFIG_WIFI_MAC is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-# CONFIG_LIB80211 is not set
-
-#
-# CFG80211 needs to be enabled for MAC80211
-#
-
-#
-# Some wireless drivers require a rate control algorithm
-#
-# CONFIG_WIMAX is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_PM is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND is not set
-CONFIG_MTD_RKNAND=y
-CONFIG_MTD_NAND_RK29XX=y
-CONFIG_MTD_RKNAND_BUFFER=y
-# CONFIG_MTD_EMMC_CLK_POWER_SAVE is not set
-# CONFIG_MTD_NAND_RK29XX_DEBUG is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# LPDDR flash memory drivers
-#
-# CONFIG_MTD_LPDDR is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MG_DISK is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_ANDROID_PMEM=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_KERNEL_DEBUGGER_CORE is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_UID_STAT is not set
-# CONFIG_WL127X_RFKILL is not set
-CONFIG_APANIC=y
-CONFIG_APANIC_PLABEL="kpanic"
-# CONFIG_STE is not set
-# CONFIG_MTK23D is not set
-CONFIG_TDSC8800=y
-# CONFIG_FM580X is not set
-# CONFIG_MU509 is not set
-# CONFIG_RK29_NEWTON is not set
-CONFIG_RK29_SC8800=y
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_RK29_SUPPORT_MODEM is not set
-CONFIG_RK29_GPS=y
-CONFIG_GPS_GNS7560=y
-
-#
-# Motion Sensors Support
-#
-# CONFIG_MPU_NONE is not set
-# CONFIG_MPU_SENSORS_MPU3050 is not set
-# CONFIG_MPU_SENSORS_MPU6000 is not set
-# CONFIG_MPU_SENSORS_TIMERIRQ is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=y
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_DM_UEVENT=y
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_RK29_VMAC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_WLAN=y
-CONFIG_WLAN_80211=y
-# CONFIG_WIFI_NONE is not set
-CONFIG_BCM4329=y
-# CONFIG_MV8686 is not set
-# CONFIG_BCM4319 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPPOLAC is not set
-# CONFIG_PPPOPNS is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-CONFIG_INPUT_POLLDEV=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-CONFIG_INPUT_KEYRESET=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYS_RK29=y
-# CONFIG_SYNAPTICS_SO340010 is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_QT2160 is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_WM831X_GPIO is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_XPT2046_SPI is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_ILI2102_IIC is not set
-# CONFIG_TOUCHSCREEN_IT7250 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_HANNSTAR_P1003 is not set
-# CONFIG_ATMEL_MXT224 is not set
-# CONFIG_SINTEK_3FA16 is not set
-# CONFIG_EETI_EGALAX is not set
-# CONFIG_TOUCHSCREEN_IT7260 is not set
-# CONFIG_TOUCHSCREEN_NAS is not set
-# CONFIG_LAIBAO_TS is not set
-# CONFIG_TOUCHSCREEN_GT801_IIC is not set
-# CONFIG_TOUCHSCREEN_GT818_IIC is not set
-CONFIG_TOUCHSCREEN_PIXCIR=y
-# CONFIG_TOUCHSCREEN_FT5X0X is not set
-# CONFIG_D70_L3188A is not set
-# CONFIG_TOUCHSCREEN_GT819 is not set
-# CONFIG_TOUCHSCREEN_FT5406 is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_LPSENSOR_ISL29028 is not set
-# CONFIG_INPUT_LPSENSOR_CM3602 is not set
-# CONFIG_INPUT_LPSENSOR_AL3006 is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYCHORD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INPUT_CM109 is not set
-CONFIG_INPUT_UINPUT=y
-# CONFIG_INPUT_GPIO is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-CONFIG_INPUT_WM831X_ON=y
-CONFIG_MAG_SENSORS=y
-CONFIG_COMPASS_AK8975=y
-# CONFIG_COMPASS_AK8973 is not set
-# CONFIG_COMPASS_MMC328X is not set
-CONFIG_G_SENSOR_DEVICE=y
-# CONFIG_GS_MMA7660 is not set
-# CONFIG_GS_MMA8452 is not set
-CONFIG_GS_BMA023=y
-# CONFIG_GS_L3G4200D is not set
-# CONFIG_INPUT_JOGBALL is not set
-# CONFIG_LIGHT_SENSOR_DEVICE is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVMEM=y
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MAX3100 is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_RK29=y
-CONFIG_SERIAL_RK29_STANDARD=y
-CONFIG_UART0_RK29=y
-CONFIG_UART0_CTS_RTS_RK29=y
-# CONFIG_UART0_DMA_RK29 is not set
-CONFIG_UART1_RK29=y
-CONFIG_UART2_RK29=y
-CONFIG_UART2_CTS_RTS_RK29=y
-# CONFIG_UART2_DMA_RK29 is not set
-CONFIG_UART3_RK29=y
-# CONFIG_UART3_CTS_RTS_RK29 is not set
-# CONFIG_UART3_DMA_RK29 is not set
-CONFIG_SERIAL_RK29_CONSOLE=y
-# CONFIG_SERIAL_SC8800 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_DCC_TTY is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-CONFIG_I2C_RK29=y
-
-#
-# Now, there are four I2C interfaces selected by developer.
-#
-CONFIG_I2C0_RK29=y
-CONFIG_RK29_I2C0_CONTROLLER=y
-# CONFIG_RK29_I2C0_GPIO is not set
-CONFIG_I2C1_RK29=y
-CONFIG_RK29_I2C1_CONTROLLER=y
-# CONFIG_RK29_I2C1_GPIO is not set
-CONFIG_I2C2_RK29=y
-CONFIG_RK29_I2C2_CONTROLLER=y
-# CONFIG_RK29_I2C2_GPIO is not set
-CONFIG_I2C3_RK29=y
-CONFIG_RK29_I2C3_CONTROLLER=y
-# CONFIG_RK29_I2C3_GPIO is not set
-# CONFIG_I2C_DEV_RK29 is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_PCA963X is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_GPIO is not set
-CONFIG_SPIM_RK29=y
-CONFIG_SPIM0_RK29=y
-CONFIG_SPIM1_RK29=y
-CONFIG_LCD_USE_SPIM_CONTROL=y
-# CONFIG_LCD_USE_SPI0 is not set
-CONFIG_LCD_USE_SPI1=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_ADC=y
-# CONFIG_ADC_RK28 is not set
-CONFIG_ADC_RK29=y
-
-#
-# Headset device support
-#
-CONFIG_RK_HEADSET_DET=y
-
-#
-# PPS support
-#
-# CONFIG_PPS is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-CONFIG_GPIO_WM831X=y
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_MC33880 is not set
-
-#
-# AC97 GPIO expanders:
-#
-# CONFIG_GPIO_PCA9554 is not set
-# CONFIG_IOEXTEND_TCA6424 is not set
-CONFIG_EXPANDED_GPIO_NUM=0
-CONFIG_EXPANDED_GPIO_IRQ_NUM=0
-# CONFIG_EXPAND_GPIO_SOFT_INTERRUPT is not set
-CONFIG_SPI_FPGA_GPIO_NUM=96
-CONFIG_SPI_FPGA_GPIO_IRQ_NUM=16
-# CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-CONFIG_WM831X_BACKUP=y
-CONFIG_WM831X_POWER=y
-CONFIG_WM831X_CHARGER_DISPLAY=y
-# CONFIG_WM831X_WITH_BATTERY is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_STC3100 is not set
-# CONFIG_BATTERY_BQ27510 is not set
-# CONFIG_BATTERY_BQ27541 is not set
-# CONFIG_BATTERY_BQ3060 is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TPS65910_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-CONFIG_MFD_WM831X=y
-CONFIG_MFD_WM831X_I2C=y
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM831X_SPI_A22 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_MC13783 is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_EZX_PCAP is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM831X=y
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_RK2818_REGULATOR_CHARGE is not set
-# CONFIG_RK2818_REGULATOR_LP8725 is not set
-# CONFIG_RK29_PWM_REGULATOR is not set
-CONFIG_MEDIA_SUPPORT=y
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEOBUF_GEN=y
-CONFIG_VIDEOBUF_DMA_CONTIG=y
-# CONFIG_VIDEO_RK29XX_VOUT is not set
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-CONFIG_SOC_CAMERA=y
-# CONFIG_SOC_CAMERA_MT9M001 is not set
-# CONFIG_SOC_CAMERA_MT9M111 is not set
-# CONFIG_SOC_CAMERA_MT9M112 is not set
-# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T111 is not set
-# CONFIG_SOC_CAMERA_MT9P111 is not set
-# CONFIG_SOC_CAMERA_MT9D112 is not set
-# CONFIG_SOC_CAMERA_MT9D113 is not set
-# CONFIG_SOC_CAMERA_MT9V022 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
-# CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
-# CONFIG_SOC_CAMERA_OV7675 is not set
-# CONFIG_SOC_CAMERA_OV2655 is not set
-# CONFIG_SOC_CAMERA_OV2659 is not set
-# CONFIG_SOC_CAMERA_OV9650 is not set
-# CONFIG_SOC_CAMERA_OV2640 is not set
-# CONFIG_SOC_CAMERA_OV3640 is not set
-# CONFIG_SOC_CAMERA_OV5642 is not set
-CONFIG_SOC_CAMERA_OV5640=y
-CONFIG_OV5640_AUTOFOCUS=y
-# CONFIG_OV5640_FIXEDFOCUS is not set
-# CONFIG_SOC_CAMERA_S5K6AA is not set
-# CONFIG_SOC_CAMERA_GT2005 is not set
-# CONFIG_SOC_CAMERA_GC0307 is not set
-# CONFIG_SOC_CAMERA_GC0308 is not set
-CONFIG_SOC_CAMERA_GC0309=y
-# CONFIG_SOC_CAMERA_GC2015 is not set
-# CONFIG_SOC_CAMERA_HI253 is not set
-# CONFIG_SOC_CAMERA_HI704 is not set
-# CONFIG_SOC_CAMERA_SIV120B is not set
-# CONFIG_SOC_CAMERA_SID130B is not set
-# CONFIG_SOC_CAMERA_NT99250 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-CONFIG_VIDEO_RK29=y
-CONFIG_VIDEO_RK29_WORK_ONEFRAME=y
-# CONFIG_VIDEO_RK29_WORK_PINGPONG is not set
-CONFIG_VIDEO_RK29_WORK_IPP=y
-# CONFIG_VIDEO_RK29_WORK_NOT_IPP is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-CONFIG_USB_GSPCA=m
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-CONFIG_USB_PWC_INPUT_EVDEV=y
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-CONFIG_SMS_SIANO_MDTV=m
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_RK2818 is not set
-CONFIG_FB_RK29=y
-CONFIG_FB_WORK_IPP=y
-# CONFIG_FB_SCALING_OSD is not set
-CONFIG_FB_ROTATE_VIDEO=y
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_BROADSHEET is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_WM831X=y
-# CONFIG_BACKLIGHT_RK29_BL is not set
-# CONFIG_FIH_TOUCHKEY_LED is not set
-# CONFIG_BACKLIGHT_AW9364 is not set
-CONFIG_BUTTON_LIGHT=y
-
-#
-# Display device support
-#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
-# CONFIG_LCD_NULL is not set
-# CONFIG_LCD_TD043MGEA1 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_TJ048NC01CA is not set
-# CONFIG_LCD_HL070VM4AU is not set
-# CONFIG_LCD_HSD070IDW1 is not set
-# CONFIG_LCD_RGB_TFT480800_25_E is not set
-# CONFIG_LCD_HSD100PXN is not set
-# CONFIG_LCD_HSD07PFW1 is not set
-# CONFIG_LCD_BYD8688FTGF is not set
-# CONFIG_LCD_B101AW06 is not set
-# CONFIG_LCD_LS035Y8DX02A is not set
-CONFIG_LCD_LS035Y8DX04A=y
-# CONFIG_LCD_CPTCLAA038LA31XE is not set
-# CONFIG_LCD_A060SE02 is not set
-# CONFIG_LCD_S1D13521 is not set
-# CONFIG_LCD_NT35582 is not set
-# CONFIG_LCD_NT35580 is not set
-# CONFIG_LCD_IPS1P5680_V1_E is not set
-# CONFIG_LCD_MCU_TFT480800_25_E is not set
-# CONFIG_LCD_NT35510 is not set
-# CONFIG_LCD_ILI9803_CPT4_3 is not set
-# CONFIG_DEFAULT_OUT_HDMI is not set
-# CONFIG_LCD_AT070TNA2 is not set
-# CONFIG_LCD_AT070TN93 is not set
-
-#
-# HDMI
-#
-# CONFIG_HDMI is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_CHARGER_CLUT224=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_RK29_SOC=y
-CONFIG_SND_RK29_SOC_I2S=y
-# CONFIG_SND_RK29_SOC_I2S_2CH is not set
-CONFIG_SND_RK29_SOC_I2S_8CH=y
-# CONFIG_SND_I2S_DMA_EVENT_DYNAMIC is not set
-CONFIG_SND_I2S_DMA_EVENT_STATIC=y
-# CONFIG_SND_RK29_SOC_WM8988 is not set
-# CONFIG_SND_RK29_SOC_WM8900 is not set
-# CONFIG_SND_RK29_SOC_alc5621 is not set
-# CONFIG_SND_RK29_SOC_alc5631 is not set
-# CONFIG_SND_RK29_SOC_RT5625 is not set
-CONFIG_SND_RK29_SOC_WM8994=y
-# CONFIG_SND_RK29_SOC_CS42L52 is not set
-# CONFIG_SND_RK29_CODEC_SOC_MASTER is not set
-CONFIG_SND_RK29_CODEC_SOC_SLAVE=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_WM8994=y
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_OTG_BLACKLIST_HUB=y
-# CONFIG_USB_MON is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
-#
-
-#
-# also be needed; see USB_STORAGE Help for more info
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-CONFIG_USB_SERIAL=y
-# CONFIG_USB_SERIAL_CONSOLE is not set
-# CONFIG_USB_EZUSB is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-CONFIG_USB_SERIAL_OPTION=y
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-CONFIG_USB_GADGET_DWC_OTG=y
-CONFIG_USB_DWC_OTG=y
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-CONFIG_USB_GADGET_DUALSPEED=y
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-CONFIG_USB_ANDROID=y
-# CONFIG_USB_ANDROID_ACM is not set
-CONFIG_USB_ANDROID_ADB=y
-CONFIG_USB_ANDROID_MASS_STORAGE=y
-# CONFIG_USB_ANDROID_RNDIS is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_USB11_HOST is not set
-# CONFIG_USB20_HOST is not set
-CONFIG_USB20_OTG=y
-# CONFIG_DWC_OTG_HOST_ONLY is not set
-CONFIG_DWC_OTG_DEVICE_ONLY=y
-# CONFIG_DWC_OTG_BOTH_HOST_SLAVE is not set
-CONFIG_DWC_CONN_EN=y
-# CONFIG_DWC_OTG_DEBUG is not set
-# CONFIG_DWC_REMOTE_WAKEUP is not set
-CONFIG_DWC_OTG=y
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_MMC_EMBEDDED_SDIO=y
-CONFIG_MMC_PARANOID_SD_INIT=y
-
-#
-# MMC/SD/SDIO Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD/SDIO Host Controller Drivers
-#
-CONFIG_SDMMC_RK29=y
-
-#
-# Now, there are two SDMMC controllers selected, SDMMC0 and SDMMC1.
-#
-CONFIG_SDMMC_RK29_OLD=y
-CONFIG_SDMMC0_RK29=y
-CONFIG_SDMMC1_RK29=y
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_SWITCH=y
-CONFIG_SWITCH_GPIO=y
-# CONFIG_ACCESSIBILITY is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_ALARM=y
-CONFIG_RTC_INTF_ALARM_DEV=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_HYM8563 is not set
-# CONFIG_RTC_M41T66 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_S35392A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-CONFIG_RTC_DRV_WM831X=y
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
-CONFIG_STAGING=y
-# CONFIG_STAGING_EXCLUDE_BUILD is not set
-# CONFIG_USB_IP_COMMON is not set
-# CONFIG_PRISM2_USB is not set
-# CONFIG_ECHO is not set
-# CONFIG_COMEDI is not set
-# CONFIG_ASUS_OLED is not set
-# CONFIG_TRANZPORT is not set
-
-#
-# Android
-#
-CONFIG_ANDROID=y
-CONFIG_ANDROID_BINDER_IPC=y
-CONFIG_ANDROID_LOGGER=y
-CONFIG_ANDROID_RAM_CONSOLE=y
-CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
-CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
-# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set
-CONFIG_ANDROID_TIMED_OUTPUT=y
-CONFIG_ANDROID_TIMED_GPIO=y
-CONFIG_ANDROID_LOW_MEMORY_KILLER=y
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_LINE6_USB is not set
-# CONFIG_USB_SERIAL_QUATECH2 is not set
-# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_FB_UDL is not set
-
-#
-# RAR Register Driver
-#
-# CONFIG_RAR_REGISTER is not set
-# CONFIG_IIO is not set
-
-#
-# GPU Vivante
-#
-CONFIG_VIVANTE=y
-
-#
-# IPP
-#
-CONFIG_RK29_IPP=y
-# CONFIG_DEINTERLACE is not set
-
-#
-# CMMB
-#
-CONFIG_CMMB=y
-CONFIG_SMS_HOSTLIB_SUBSYS=y
-CONFIG_SMS_SPI_ROCKCHIP=y
-# CONFIG_TEST_CODE is not set
-# CONFIG_RK29_SMC is not set
-
-#
-# CIR support
-#
-# CONFIG_RK_CIR is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
-# CONFIG_EXT4_FS_XATTR is not set
-# CONFIG_EXT4_DEBUG is not set
-CONFIG_JBD=y
-CONFIG_JBD2=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-# CONFIG_CUSE is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-CONFIG_NLS_CODEPAGE_936=y
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=y
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-# CONFIG_FTRACE is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_VMAC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=y
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_REED_SOLOMON=y
-CONFIG_REED_SOLOMON_ENC8=y
-CONFIG_REED_SOLOMON_DEC8=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
-#define grf_readl(offset) readl(RK29_GRF_BASE + offset)
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
help
Support for the ROCKCHIP Board For A22.
-config MACH_RK29_TD8801_V2
- depends on ARCH_RK29
- bool "ROCKCHIP Board Rk29 For TD8801_v2"
- help
- Support for the ROCKCHIP Board For TD8801_v2.
-
config MACH_RK29_PHONEPADSDK
depends on ARCH_RK29
bool "ROCKCHIP Board Rk29 For Phone Pad Sdk"
obj-$(CONFIG_MACH_RK29_PHONESDK) += board-rk29-phonesdk.o board-rk29-phonesdk-key.o board-rk29-phonesdk-rfkill.o
obj-$(CONFIG_MACH_RK29FIH) += board-rk29-fih.o board-rk29-fih-key.o board-rk29sdk-rfkill.o board-rk29sdk-power.o
obj-$(CONFIG_MACH_RK29_A22) += board-rk29-a22.o board-rk29-a22-key.o board-rk29-a22-rfkill.o
-obj-$(CONFIG_MACH_RK29_TD8801_V2) += board-rk29-td8801_v2.o board-rk29-td8801_v2-key.o board-rk29-td8801_v2-rfkill.o
obj-$(CONFIG_MACH_RK29_PHONEPADSDK) += board-rk29phonepadsdk.o board-rk29phonepadsdk-key.o board-rk29phonepadsdk-rfkill.o board-rk29phonepadsdk-power.o
obj-$(CONFIG_MACH_RK29_newton) += board-rk29-newton.o board-rk29-newton-key.o board-newton-rfkill.o board-rk29sdk-power.o
obj-$(CONFIG_MACH_RK29_K97) += board-rk29-k97.o board-rk29k97-key.o board-rk29sdk-rfkill.o board-rk29sdk-power.o
MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
.io_init = rk29_sdmmc1_cfg_gpio,
.dma_name = "sdio",
-#if !defined(CONFIG_SDMMC_RK29_OLD)
.set_iomux = rk29_sdmmc_set_iomux,
-#endif
#ifdef CONFIG_SDMMC1_USE_DMA
.use_dma = 1,
#else
+++ /dev/null
-#include <mach/key.h>
-#include <mach/gpio.h>
-
-#define EV_ENCALL KEY_F4
-#define EV_MENU KEY_F1
-
-#define PRESS_LEV_LOW 1
-#define PRESS_LEV_HIGH 0
-
-static struct rk29_keys_button key_button[] = {
- {
- .desc = "menu",
- .code = EV_MENU,
- .gpio = RK29_PIN6_PA0,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "vol+",
- .code = KEY_VOLUMEUP,
- .gpio = RK29_PIN6_PA1,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "vol-",
- .code = KEY_VOLUMEDOWN,
- .gpio = RK29_PIN6_PA2,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "home",
- .code = KEY_HOME,
- .gpio = RK29_PIN6_PA3,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "search",
- .code = KEY_SEARCH,
- .gpio = RK29_PIN6_PA4,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "esc",
- .code = KEY_BACK,
- .gpio = RK29_PIN6_PA5,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "sensor",
- .code = KEY_CAMERA,
- .gpio = RK29_PIN6_PA6,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "play",
- .code = KEY_POWER,
- .gpio = RK29_PIN6_PA7,
- .active_low = PRESS_LEV_LOW,
- .wakeup = 1,
- },
-#if 0
- {
- .desc = "vol+",
- .code = KEY_VOLUMEDOWN,
- .adc_value = 95,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "vol-",
- .code = KEY_VOLUMEUP,
- .adc_value = 249,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "menu",
- .code = EV_MENU,
- .adc_value = 406,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "home",
- .code = KEY_HOME,
- .code_long_press = KEY_F4,
- .adc_value = 561,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "esc",
- .code = KEY_ESC,
- .adc_value = 726,
- .active_low = PRESS_LEV_LOW,
- },
- {
- .desc = "adkey6",
- .code = KEY_BACK,
- .code_long_press = EV_ENCALL,
- .adc_value = 899,
- .active_low = PRESS_LEV_LOW,
- },
-#endif
-};
-struct rk29_keys_platform_data rk29_keys_pdata = {
- .buttons = key_button,
- .nbuttons = ARRAY_SIZE(key_button),
- .chn = -1, //chn: 0-7, if do not use ADC,set 'chn' -1
-};
+++ /dev/null
-/*
- * Copyright (C) 2010 ROCKCHIP, Inc.
- * Author: roger_chen <cz@rock-chips.com>
- *
- * This program is the bluetooth device bcm4329's driver,
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/rfkill.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/wakelock.h>
-#include <linux/fs.h>
-#include <asm/uaccess.h>
-#include <mach/gpio.h>
-#include <asm/irq.h>
-#include <mach/iomux.h>
-#include <linux/wakelock.h>
-#include <linux/timer.h>
-#include <mach/board.h>
-#if 0
-#define DBG(x...) printk(KERN_INFO x)
-#else
-#define DBG(x...)
-#endif
-
-#define BT_WAKE_HOST_SUPPORT 1
-
-struct bt_ctrl
-{
- struct rfkill *bt_rfk;
-#if BT_WAKE_HOST_SUPPORT
- struct timer_list tl;
- bool b_HostWake;
- struct wake_lock bt_wakelock;
-#endif
-};
-
-#define BT_GPIO_POWER RK29_PIN5_PD6
-#define IOMUX_BT_GPIO_POWER rk29_mux_api_set(GPIO5D6_SDMMC1PWREN_NAME, GPIO5H_GPIO5D6);
-#define BT_GPIO_RESET RK29_PIN6_PC7
-#define BT_GPIO_WAKE_UP RK29_PIN6_PD0
-#define BT_GPIO_WAKE_UP_HOST RK29_PIN4_PD4
-#define IOMUX_BT_GPIO_WAKE_UP_HOST() rk29_mux_api_set(GPIO4D4_CPUTRACECLK_NAME,GPIO4H_GPIO4D4);
-
-//bt cts paired to uart rts
-#define UART_RTS RK29_PIN2_PA7
-#define IOMUX_UART_RTS_GPIO rk29_mux_api_set(GPIO2A7_UART2RTSN_NAME, GPIO2L_GPIO2A7);
-#define IOMUX_UART_RTS rk29_mux_api_set(GPIO2A7_UART2RTSN_NAME, GPIO2L_UART2_RTS_N);
-
-#define BT_WAKE_LOCK_TIMEOUT 10 //s
-
-static const char bt_name[] = "bcm4329";
-extern int rk29sdk_bt_power_state;
-extern int rk29sdk_wifi_power_state;
-
-struct bt_ctrl gBtCtrl;
-
-#if BT_WAKE_HOST_SUPPORT
-void resetBtHostSleepTimer(void)
-{
- mod_timer(&(gBtCtrl.tl),jiffies + BT_WAKE_LOCK_TIMEOUT*HZ);//ÔÙÖØÐÂÉèÖó¬Ê±Öµ¡£
-}
-
-void btWakeupHostLock(void)
-{
- if(gBtCtrl.b_HostWake == false){
- DBG("*************************Lock\n");
-
- wake_lock(&(gBtCtrl.bt_wakelock));
- gBtCtrl.b_HostWake = true;
- }
-}
-
-void btWakeupHostUnlock(void)
-{
- if(gBtCtrl.b_HostWake == true){
- DBG("*************************UnLock\n");
- wake_unlock(&(gBtCtrl.bt_wakelock)); //ÈÃϵͳ˯Ãß
- gBtCtrl.b_HostWake = false;
- }
-}
-
-static void timer_hostSleep(unsigned long arg)
-{
- DBG("%s---b_HostWake=%d\n",__FUNCTION__,gBtCtrl.b_HostWake);
- btWakeupHostUnlock();
-}
-
-
-#ifdef CONFIG_PM
-static int bcm4329_rfkill_suspend(struct platform_device *pdev, pm_message_t state)
-{
- DBG("%s\n",__FUNCTION__);
-
- //To prevent uart to receive bt data when suspended
- IOMUX_UART_RTS_GPIO;
- gpio_request(UART_RTS, "uart_rts");
- gpio_direction_output(UART_RTS, 0);
- gpio_set_value(UART_RTS, GPIO_HIGH);
-
- return 0;
-}
-
-static int bcm4329_rfkill_resume(struct platform_device *pdev)
-{
- DBG("%s\n",__FUNCTION__);
-
- btWakeupHostLock();
- resetBtHostSleepTimer();
-
- gpio_set_value(UART_RTS, GPIO_LOW);
- IOMUX_UART_RTS;
-
- return 0;
-}
-#else
-#define bcm4329_rfkill_suspend NULL
-#define bcm4329_rfkill_resume NULL
-#endif
-
-static irqreturn_t bcm4329_wake_host_irq(int irq, void *dev)
-{
- DBG("%s\n",__FUNCTION__);
-
- btWakeupHostLock();
- resetBtHostSleepTimer();
- return IRQ_HANDLED;
-}
-#endif
-
-#ifdef CONFIG_BT_HCIBCM4325
-int bcm4325_sleep(int bSleep)
-{
-// printk("*************bt enter sleep***************\n");
- if (bSleep)
- gpio_set_value(BT_GPIO_WAKE_UP, GPIO_LOW); //low represent bt device may enter sleep
- else
- gpio_set_value(BT_GPIO_WAKE_UP, GPIO_HIGH); //high represent bt device must be awake
-
- //printk("sleep=%d\n",bSleep);
-}
-#endif
-
-static int bcm4329_set_block(void *data, bool blocked)
-{
- DBG("%s---blocked :%d\n", __FUNCTION__, blocked);
-
- IOMUX_BT_GPIO_POWER;
-
- if (false == blocked) {
- gpio_set_value(BT_GPIO_POWER, GPIO_HIGH); /* bt power on */
- gpio_set_value(BT_GPIO_RESET, GPIO_LOW);
- mdelay(200);
- gpio_set_value(BT_GPIO_RESET, GPIO_HIGH); /* bt reset deactive*/
- mdelay(200);
-
-#if BT_WAKE_HOST_SUPPORT
- btWakeupHostLock();
-#endif
- pr_info("bt turn on power\n");
- }
- else {
-#if BT_WAKE_HOST_SUPPORT
- btWakeupHostUnlock();
-#endif
- if (!rk29sdk_wifi_power_state) {
- gpio_set_value(BT_GPIO_POWER, GPIO_LOW); /* bt power off */
- mdelay(20);
- pr_info("bt shut off power\n");
- }else {
- pr_info("bt shouldn't shut off power, wifi is using it!\n");
- }
-
- gpio_set_value(BT_GPIO_RESET, GPIO_LOW); /* bt reset active*/
- mdelay(20);
- }
-
- rk29sdk_bt_power_state = !blocked;
- return 0;
-}
-
-
-static const struct rfkill_ops bcm4329_rfk_ops = {
- .set_block = bcm4329_set_block,
-};
-
-static int __devinit bcm4329_rfkill_probe(struct platform_device *pdev)
-{
- int rc = 0;
- bool default_state = true;
-
- DBG("Enter::%s,line=%d\n",__FUNCTION__,__LINE__);
-
- /* default to bluetooth off */
- bcm4329_set_block(NULL, default_state); /* blocked -> bt off */
-
- gBtCtrl.bt_rfk = rfkill_alloc(bt_name,
- NULL,
- RFKILL_TYPE_BLUETOOTH,
- &bcm4329_rfk_ops,
- NULL);
-
- if (!gBtCtrl.bt_rfk)
- {
- printk("fail to rfkill_allocate************\n");
- return -ENOMEM;
- }
-
- rfkill_set_states(gBtCtrl.bt_rfk, default_state, false);
-
- rc = rfkill_register(gBtCtrl.bt_rfk);
- if (rc)
- {
- printk("failed to rfkill_register,rc=0x%x\n",rc);
- rfkill_destroy(gBtCtrl.bt_rfk);
- }
-
- gpio_request(BT_GPIO_POWER, NULL);
- gpio_request(BT_GPIO_RESET, NULL);
- gpio_request(BT_GPIO_WAKE_UP, NULL);
-
-#if BT_WAKE_HOST_SUPPORT
- init_timer(&(gBtCtrl.tl));
- gBtCtrl.tl.expires = jiffies + BT_WAKE_LOCK_TIMEOUT*HZ;
- gBtCtrl.tl.function = timer_hostSleep;
- add_timer(&(gBtCtrl.tl));
- gBtCtrl.b_HostWake = false;
-
- wake_lock_init(&(gBtCtrl.bt_wakelock), WAKE_LOCK_SUSPEND, "bt_wake");
-
- rc = gpio_request(BT_GPIO_WAKE_UP_HOST, "bt_wake");
- if (rc) {
- printk("%s:failed to request RAHO_BT_WAKE_UP_HOST\n",__FUNCTION__);
- }
-
- IOMUX_BT_GPIO_WAKE_UP_HOST();
- gpio_pull_updown(BT_GPIO_WAKE_UP_HOST,GPIOPullUp);
- rc = request_irq(gpio_to_irq(BT_GPIO_WAKE_UP_HOST),bcm4329_wake_host_irq,IRQF_TRIGGER_FALLING,NULL,NULL);
- if(rc)
- {
- printk("%s:failed to request RAHO_BT_WAKE_UP_HOST irq\n",__FUNCTION__);
- gpio_free(BT_GPIO_WAKE_UP_HOST);
- }
- enable_irq_wake(gpio_to_irq(BT_GPIO_WAKE_UP_HOST)); // so RAHO_BT_WAKE_UP_HOST can wake up system
-
- printk(KERN_INFO "bcm4329 module has been initialized,rc=0x%x\n",rc);
- #endif
-
- return rc;
-
-
-}
-
-
-static int __devexit bcm4329_rfkill_remove(struct platform_device *pdev)
-{
- if (gBtCtrl.bt_rfk)
- rfkill_unregister(gBtCtrl.bt_rfk);
- gBtCtrl.bt_rfk = NULL;
-#if BT_WAKE_HOST_SUPPORT
- del_timer(&(gBtCtrl.tl));//ɾµô¶¨Ê±Æ÷
- btWakeupHostUnlock();
- wake_lock_destroy(&(gBtCtrl.bt_wakelock));
-#endif
- platform_set_drvdata(pdev, NULL);
-
- DBG("Enter::%s,line=%d\n",__FUNCTION__,__LINE__);
- return 0;
-}
-
-static struct platform_driver bcm4329_rfkill_driver = {
- .probe = bcm4329_rfkill_probe,
- .remove = __devexit_p(bcm4329_rfkill_remove),
- .driver = {
- .name = "rk29sdk_rfkill",
- .owner = THIS_MODULE,
- },
-#if BT_WAKE_HOST_SUPPORT
- .suspend = bcm4329_rfkill_suspend,
- .resume = bcm4329_rfkill_resume,
-#endif
-};
-
-/*
- * Module initialization
- */
-static int __init bcm4329_mod_init(void)
-{
- int ret;
- DBG("Enter::%s,line=%d\n",__FUNCTION__,__LINE__);
- ret = platform_driver_register(&bcm4329_rfkill_driver);
- printk("ret=0x%x\n", ret);
- return ret;
-}
-
-static void __exit bcm4329_mod_exit(void)
-{
- platform_driver_unregister(&bcm4329_rfkill_driver);
-}
-
-module_init(bcm4329_mod_init);
-module_exit(bcm4329_mod_exit);
-MODULE_DESCRIPTION("bcm4329 Bluetooth driver");
-MODULE_AUTHOR("roger_chen cz@rock-chips.com");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* arch/arm/mach-rk29/board-rk29-phonesdk.c
- *
- * Copyright (C) 2010 ROCKCHIP, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/skbuff.h>
-#include <linux/spi/spi.h>
-#include <linux/mmc/host.h>
-#include <linux/android_pmem.h>
-#include <linux/usb/android_composite.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <asm/hardware/gic.h>
-
-#include <mach/iomux.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-#include <mach/rk29_iomap.h>
-#include <mach/board.h>
-#include <mach/rk29_nand.h>
-#include <mach/rk29_camera.h> /* ddl@rock-chips.com : camera support */
-#include <media/soc_camera.h> /* ddl@rock-chips.com : camera support */
-#include <mach/vpu_mem.h>
-#include <mach/sram.h>
-#include <mach/ddr.h>
-#include <mach/cpufreq.h>
-
-#include <linux/regulator/rk29-pwm-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/wm831x/pdata.h>
-#include <linux/mfd/wm831x/core.h>
-#include <linux/mfd/wm831x/gpio.h>
-#include <linux/mfd/wm8994/pdata.h>
-#include <linux/mfd/wm8994/registers.h>
-
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mpu.h>
-#include "devices.h"
-
-
-#if defined(CONFIG_TDSC8800)
-#include <linux/mtk23d.h>
-#endif
-
-#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
-#include "../../../drivers/testcode/gpio_wave.h"
-#endif
-
-#include "../../../drivers/headset_observe/rk_headset.h"
-#include "../../../drivers/staging/android/timed_gpio.h"
-/*set touchscreen different type header*/
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI)
-#include "../../../drivers/input/touchscreen/xpt2046_ts.h"
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
-#include "../../../drivers/input/touchscreen/xpt2046_tslib_ts.h"
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
-#include "../../../drivers/input/touchscreen/xpt2046_cbn_ts.h"
-#endif
-#include "../../../drivers/misc/gps/rk29_gps.h"
-#include "../../../drivers/tty/serial/sc8800.h"
-#ifdef CONFIG_VIDEO_RK29
-/*---------------- Camera Sensor Macro Define Begin ------------------------*/
-/*---------------- Camera Sensor Configuration Macro Begin ------------------------*/
-#define CONFIG_SENSOR_0 RK29_CAM_SENSOR_OV5640 /* back camera sensor */
-#define CONFIG_SENSOR_IIC_ADDR_0 0x78
-#define CONFIG_SENSOR_IIC_ADAPTER_ID_0 3
-#define CONFIG_SENSOR_POWER_PIN_0 INVALID_GPIO
-#define CONFIG_SENSOR_RESET_PIN_0 INVALID_GPIO
-#define CONFIG_SENSOR_POWERDN_PIN_0 RK29_PIN6_PB7
-#define CONFIG_SENSOR_FALSH_PIN_0 RK29_PIN6_PB5
-#define CONFIG_SENSOR_POWERACTIVE_LEVEL_0 RK29_CAM_POWERACTIVE_L
-#define CONFIG_SENSOR_RESETACTIVE_LEVEL_0 RK29_CAM_RESETACTIVE_L
-#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_0 RK29_CAM_POWERDNACTIVE_H
-#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_0 RK29_CAM_FLASHACTIVE_H
-
-#define CONFIG_SENSOR_TORCH_PIN_0 RK29_PIN4_PD1
-
-
-#define CONFIG_SENSOR_1 RK29_CAM_SENSOR_GC0309 /* front camera sensor */
-#define CONFIG_SENSOR_IIC_ADDR_1 0x42
-#define CONFIG_SENSOR_IIC_ADAPTER_ID_1 3
-#define CONFIG_SENSOR_POWER_PIN_1 INVALID_GPIO
-#define CONFIG_SENSOR_RESET_PIN_1 INVALID_GPIO
-#define CONFIG_SENSOR_POWERDN_PIN_1 RK29_PIN5_PD7
-#define CONFIG_SENSOR_FALSH_PIN_1 INVALID_GPIO
-#define CONFIG_SENSOR_POWERACTIVE_LEVEL_1 RK29_CAM_POWERACTIVE_L
-#define CONFIG_SENSOR_RESETACTIVE_LEVEL_1 RK29_CAM_RESETACTIVE_L
-#define CONFIG_SENSOR_POWERDNACTIVE_LEVEL_1 RK29_CAM_POWERDNACTIVE_H
-#define CONFIG_SENSOR_FLASHACTIVE_LEVEL_1 RK29_CAM_FLASHACTIVE_L
-
-#define CONFIG_SENSOR_TORCH_PIN_1 RK29_PIN4_PD1
-
-#endif //#ifdef CONFIG_VIDEO_RK29
-/*---------------- Camera Sensor Configuration Macro End------------------------*/
-#include "../../../drivers/media/video/rk29_camera.c"
-/*---------------- Camera Sensor Macro Define End ------------------------*/
-
-
-#include "../../../drivers/cmmb/siano/smsspiphy.h"
-/* Set memory size of pmem */
-#ifdef CONFIG_RK29_MEM_SIZE_M
-#define SDRAM_SIZE (CONFIG_RK29_MEM_SIZE_M * SZ_1M)
-#else
-#define SDRAM_SIZE SZ_512M
-#endif
-#define PMEM_GPU_SIZE SZ_64M
-#define PMEM_UI_SIZE SZ_32M
-#define PMEM_VPU_SIZE SZ_64M
-#define PMEM_CAM_SIZE PMEM_CAM_NECESSARY
-#ifdef CONFIG_VIDEO_RK29_WORK_IPP
-#define MEM_CAMIPP_SIZE PMEM_CAMIPP_NECESSARY
-#else
-#define MEM_CAMIPP_SIZE 0
-#endif
-#define MEM_FB_SIZE (3*SZ_2M)//(3*SZ_2M)
-#ifdef CONFIG_FB_WORK_IPP
-#define MEM_FBIPP_SIZE SZ_2M//SZ_8M //1920 x 1080 x 2 x 2 //RGB565 = x2;RGB888 = x4
-#else
-#define MEM_FBIPP_SIZE 0
-#endif
-#if SDRAM_SIZE > SZ_512M
-#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SZ_512M - PMEM_GPU_SIZE)
-#else
-#define PMEM_GPU_BASE (RK29_SDRAM_PHYS + SDRAM_SIZE - PMEM_GPU_SIZE)
-#endif
-#define PMEM_UI_BASE (PMEM_GPU_BASE - PMEM_UI_SIZE)
-#define PMEM_VPU_BASE (PMEM_UI_BASE - PMEM_VPU_SIZE)
-#define PMEM_CAM_BASE (PMEM_VPU_BASE - PMEM_CAM_SIZE)
-#define MEM_CAMIPP_BASE (PMEM_CAM_BASE - MEM_CAMIPP_SIZE)
-#define MEM_FB_BASE (MEM_CAMIPP_BASE - MEM_FB_SIZE)
-#define MEM_FBIPP_BASE (MEM_FB_BASE - MEM_FBIPP_SIZE)
-#define LINUX_SIZE (MEM_FBIPP_BASE - RK29_SDRAM_PHYS)
-
-#define PREALLOC_WLAN_SEC_NUM 4
-#define PREALLOC_WLAN_BUF_NUM 160
-#define PREALLOC_WLAN_SECTION_HEADER 24
-
-#define WLAN_SECTION_SIZE_0 (PREALLOC_WLAN_BUF_NUM * 128)
-#define WLAN_SECTION_SIZE_1 (PREALLOC_WLAN_BUF_NUM * 128)
-#define WLAN_SECTION_SIZE_2 (PREALLOC_WLAN_BUF_NUM * 512)
-#define WLAN_SECTION_SIZE_3 (PREALLOC_WLAN_BUF_NUM * 1024)
-
-#define WLAN_SKB_BUF_NUM 16
-#define UNLOCK_SECURITY_KEY ~(0x1<<5)
-#define LOCK_SECURITY_KEY 0x00
-
-static struct sk_buff *wlan_static_skb[WLAN_SKB_BUF_NUM];
-
-struct wifi_mem_prealloc {
- void *mem_ptr;
- unsigned long size;
-};
-
-extern struct sys_timer rk29_timer;
-
-static int rk29_nand_io_init(void)
-{
- return 0;
-}
-
-struct rk29_nand_platform_data rk29_nand_data = {
- .width = 1, /* data bus width in bytes */
- .hw_ecc = 1, /* hw ecc 0: soft ecc */
- .num_flash = 1,
- .io_init = rk29_nand_io_init,
-};
-
-#ifdef CONFIG_FB_RK29
-/*****************************************************************************************
- * lcd devices
- * author: zyw@rock-chips.com
- *****************************************************************************************/
-//#ifdef CONFIG_LCD_TD043MGEA1
-#define LCD_RXD_PIN RK29_PIN2_PC7
-#define LCD_TXD_PIN RK29_PIN3_PA1// RK29_PIN2_PC6
-#define LCD_CLK_PIN RK29_PIN3_PA2//RK29_PIN2_PC4
-#define LCD_CS_PIN RK29_PIN3_PA5//RK29_PIN2_PC5
-/*****************************************************************************************
-* frame buffer devices
-* author: zyw@rock-chips.com
-*****************************************************************************************/
-#define FB_ID 0
-#define FB_DISPLAY_ON_PIN INVALID_GPIO//RK29_PIN6_PD0
-#define FB_LCD_STANDBY_PIN INVALID_GPIO//RK29_PIN6_PD1
-#define FB_LCD_CABC_EN_PIN INVALID_GPIO//RK29_PIN6_PD2
-#define FB_MCU_FMK_PIN INVALID_GPIO
-
-#define FB_DISPLAY_ON_VALUE GPIO_HIGH
-#define FB_LCD_STANDBY_VALUE GPIO_HIGH
-
-//#endif
-static int rk29_lcd_io_init(void)
-{
- int ret = 0;
- //printk("rk29_lcd_io_init\n");
- //ret = gpio_request(LCD_RXD_PIN, NULL);
- ret = gpio_request(LCD_TXD_PIN, NULL);
- ret = gpio_request(LCD_CLK_PIN, NULL);
- ret = gpio_request(LCD_CS_PIN, NULL);
- //rk29_mux_api_set(GPIO2C7_SPI1RXD_NAME,GPIO2H_GPIO2C7);
- rk29_mux_api_set(GPIO3A1_I2S1SCLK_NAME,GPIO3L_GPIO3A1);
- rk29_mux_api_set(GPIO3A5_I2S1LRCKTX_NAME,GPIO3L_GPIO3A5);
- rk29_mux_api_set(GPIO3A2_I2S1LRCKRX_NAME,GPIO3L_GPIO3A2);
- return ret;
-}
-
-static int rk29_lcd_io_deinit(void)
-{
- int ret = 0;
- //printk("rk29_lcd_io_deinit\n");
- gpio_free(LCD_CS_PIN);
- gpio_free(LCD_CLK_PIN);
- gpio_free(LCD_TXD_PIN);
- //gpio_free(LCD_RXD_PIN);
- //rk29_mux_api_set(GPIO2C7_SPI1RXD_NAME,GPIO2H_SPI1_RXD);
- //rk29_mux_api_set(GPIO2C6_SPI1TXD_NAME,GPIO2H_SPI1_TXD);
- ///rk29_mux_api_set(GPIO2C5_SPI1CSN0_NAME,GPIO2H_SPI1_CSN0);
- //rk29_mux_api_set(GPIO2C4_SPI1CLK_NAME,GPIO2H_SPI1_CLK);
- rk29_mux_api_set(GPIO3A1_I2S1SCLK_NAME,GPIO3L_I2S1_SCLK);
- rk29_mux_api_set(GPIO3A5_I2S1LRCKTX_NAME,GPIO3L_I2S1_LRCK_TX);
- rk29_mux_api_set(GPIO3A2_I2S1LRCKRX_NAME,GPIO3L_I2S1_LRCK_RX);
- return ret;
-}
-
-static struct rk29lcd_info rk29_lcd_info = {
- .txd_pin = LCD_TXD_PIN,
- .clk_pin = LCD_CLK_PIN,
- .cs_pin = LCD_CS_PIN,
- .io_init = rk29_lcd_io_init,
- .io_deinit = rk29_lcd_io_deinit,
-};
-
-int rk29_fb_io_enable(void)
-{
- if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
- {
- gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
- gpio_set_value(FB_DISPLAY_ON_PIN, FB_DISPLAY_ON_VALUE);
- }
- if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
- {
- gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
- gpio_set_value(FB_LCD_STANDBY_PIN, FB_LCD_STANDBY_VALUE);
- }
- return 0;
-}
-
-int rk29_fb_io_disable(void)
-{
- if(FB_DISPLAY_ON_PIN != INVALID_GPIO)
- {
- gpio_direction_output(FB_DISPLAY_ON_PIN, 0);
- gpio_set_value(FB_DISPLAY_ON_PIN, !FB_DISPLAY_ON_VALUE);
- }
- if(FB_LCD_STANDBY_PIN != INVALID_GPIO)
- {
- gpio_direction_output(FB_LCD_STANDBY_PIN, 0);
- gpio_set_value(FB_LCD_STANDBY_PIN, !FB_LCD_STANDBY_VALUE);
- }
- return 0;
-}
-
-static int rk29_fb_io_init(struct rk29_fb_setting_info *fb_setting)
-{
- int ret = 0;
- if(fb_setting->mcu_fmk_en && (FB_MCU_FMK_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_MCU_FMK_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_MCU_FMK_PIN);
- printk(">>>>>> FB_MCU_FMK_PIN gpio_request err \n ");
- }
- gpio_direction_input(FB_MCU_FMK_PIN);
- }
- if(fb_setting->disp_on_en && (FB_DISPLAY_ON_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_DISPLAY_ON_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_DISPLAY_ON_PIN);
- printk(">>>>>> FB_DISPLAY_ON_PIN gpio_request err \n ");
- }
- }
-
- if(fb_setting->disp_on_en && (FB_LCD_STANDBY_PIN != INVALID_GPIO))
- {
- ret = gpio_request(FB_LCD_STANDBY_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_LCD_STANDBY_PIN);
- printk(">>>>>> FB_LCD_STANDBY_PIN gpio_request err \n ");
- }
- }
-
- if(FB_LCD_CABC_EN_PIN != INVALID_GPIO)
- {
- ret = gpio_request(FB_LCD_CABC_EN_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(FB_LCD_CABC_EN_PIN);
- printk(">>>>>> FB_LCD_CABC_EN_PIN gpio_request err \n ");
- }
- gpio_direction_output(FB_LCD_CABC_EN_PIN, 0);
- gpio_set_value(FB_LCD_CABC_EN_PIN, GPIO_LOW);
- }
- rk29_fb_io_enable(); //enable it
-
- return ret;
-}
-
-static struct rk29fb_info rk29_fb_info = {
- .fb_id = FB_ID,
- .mcu_fmk_pin = FB_MCU_FMK_PIN,
- .lcd_info = &rk29_lcd_info,
- .io_init = rk29_fb_io_init,
- .io_enable = rk29_fb_io_enable,
- .io_disable = rk29_fb_io_disable,
-};
-
-/* rk29 fb resource */
-static struct resource rk29_fb_resource[] = {
- [0] = {
- .name = "lcdc reg",
- .start = RK29_LCDC_PHYS,
- .end = RK29_LCDC_PHYS + RK29_LCDC_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "lcdc irq",
- .start = IRQ_LCDC,
- .end = IRQ_LCDC,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .name = "win1 buf",
- .start = MEM_FB_BASE,
- .end = MEM_FB_BASE + MEM_FB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- #ifdef CONFIG_FB_WORK_IPP
- [3] = {
- .name = "win1 ipp buf",
- .start = MEM_FBIPP_BASE,
- .end = MEM_FBIPP_BASE + MEM_FBIPP_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- #endif
-};
-
-/*platform_device*/
-struct platform_device rk29_device_fb = {
- .name = "rk29-fb",
- .id = 4,
- .num_resources = ARRAY_SIZE(rk29_fb_resource),
- .resource = rk29_fb_resource,
- .dev = {
- .platform_data = &rk29_fb_info,
- }
-};
-
-struct platform_device rk29_device_dma_cpy = {
- .name = "dma_memcpy",
- .id = 4,
-
-};
-
-#endif
-
-static struct android_pmem_platform_data android_pmem_pdata = {
- .name = "pmem",
- .start = PMEM_UI_BASE,
- .size = PMEM_UI_SIZE,
- .no_allocator = 0,
- .cached = 1,
-};
-
-static struct platform_device android_pmem_device = {
- .name = "android_pmem",
- .id = 0,
- .dev = {
- .platform_data = &android_pmem_pdata,
- },
-};
-
-
-static struct vpu_mem_platform_data vpu_mem_pdata = {
- .name = "vpu_mem",
- .start = PMEM_VPU_BASE,
- .size = PMEM_VPU_SIZE,
- .cached = 1,
-};
-
-static struct platform_device rk29_vpu_mem_device = {
- .name = "vpu_mem",
- .id = 2,
- .dev = {
- .platform_data = &vpu_mem_pdata,
- },
-};
-
-static struct platform_device rk29_v4l2_output_devce = {
- .name = "rk29_vout",
-};
-
-/* HANNSTAR_P1003 touch I2C */
-#if defined (CONFIG_HANNSTAR_P1003)
-#define TOUCH_RESET_PIN RK29_PIN6_PC3
-#define TOUCH_INT_PIN RK29_PIN4_PD5
-
-int p1003_init_platform_hw(void)
-{
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCH_INT_PIN, 1);
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
-
- return 0;
-}
-
-
-struct p1003_platform_data p1003_info = {
- .model= 1003,
- .init_platform_hw= p1003_init_platform_hw,
-
-};
-#endif
-
-
-#if defined(CONFIG_TOUCHSCREEN_GT801_IIC)
-#include "../../../drivers/input/touchscreen/gt801_ts.h"
-#define GT801_GPIO_INT RK29_PIN4_PD5
-#define GT801_GPIO_RESET RK29_PIN6_PC3
-static struct gt801_platform_data gt801_info = {
- .model = 801,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .gpio_reset = GT801_GPIO_RESET,
- .gpio_reset_active_low = 0,
- .gpio_pendown = GT801_GPIO_INT,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .resetpin_iomux_name = NULL,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .resetpin_iomux_mode = 0,
-};
-#endif
-
-
-#if defined(CONFIG_TOUCHSCREEN_GT818_IIC)
-#include "../../../drivers/input/touchscreen/gt818_ts.h"
-#define GT818_GPIO_INT RK29_PIN4_PD5
-#define GT818_GPIO_RESET RK29_PIN6_PC3
-static struct gt818_platform_data gt818_info = {
- .model = 818,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .gpio_reset = GT818_GPIO_RESET,
- .gpio_reset_active_low = 0,
- .gpio_pendown = GT818_GPIO_INT,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .resetpin_iomux_name = NULL,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .resetpin_iomux_mode = 0,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
-#include "../../../drivers/input/touchscreen/ili2102_ts.h"
-#define GT801_GPIO_INT RK29_PIN4_PD5
-#define GT801_GPIO_RESET RK29_PIN6_PC3
-static struct ili2102_platform_data ili2102_info = {
- .model = 2102,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 481,
- .y_min = 0,
- .y_max = 801,
- .gpio_reset = GT801_GPIO_RESET,
- .gpio_reset_active_low = 1,
- .gpio_pendown = GT801_GPIO_INT,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .resetpin_iomux_name = NULL,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .resetpin_iomux_mode = 0,
-};
-#endif
-
-/* EETI_EGALAX touch I2C */
-#if defined (CONFIG_EETI_EGALAX)
-#define TOUCH_RESET_PIN RK29_PIN6_PC3
-#define TOUCH_INT_PIN RK29_PIN4_PD5
-
-static int EETI_EGALAX_init_platform_hw(void)
-{
- if(gpio_request(TOUCH_RESET_PIN,NULL) != 0){
- gpio_free(TOUCH_RESET_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
-
- if(gpio_request(TOUCH_INT_PIN,NULL) != 0){
- gpio_free(TOUCH_INT_PIN);
- printk("p1003_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(TOUCH_INT_PIN, 1);
- gpio_direction_output(TOUCH_RESET_PIN, 0);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_LOW);
- msleep(500);
- gpio_set_value(TOUCH_RESET_PIN,GPIO_HIGH);
-
- return 0;
-}
-
-
-static struct eeti_egalax_platform_data eeti_egalax_info = {
- .model= 1003,
- .init_platform_hw= EETI_EGALAX_init_platform_hw,
-
-};
-
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_PIXCIR)
-#include "../../../drivers/input/touchscreen/pixcir_i2c_ts.h"
-static struct pixcir_platform_data pixcir_info = {
- .model = 801,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .gpio_reset = RK29_PIN6_PC3,
- .gpio_reset_active_low = 1,
- .gpio_pendown = RK29_PIN4_PD5,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .resetpin_iomux_name = NULL,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .resetpin_iomux_mode = 0,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_FT5X0X)
-#include "../../../drivers/input/touchscreen/ft5x0x_ts.h"
-static struct ft5x0x_platform_data ft5x0x_info = {
- .model = 5000,
- .swap_xy = 0,
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .gpio_reset = RK29_PIN6_PC3,
- .gpio_reset_active_low = 1,
- .gpio_pendown = RK29_PIN4_PD5,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .resetpin_iomux_name = NULL,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .resetpin_iomux_mode = 0,
-};
-#endif
-/*MMA8452 gsensor*/
-#if defined (CONFIG_GS_MMA8452)
-#define MMA8452_INT_PIN RK29_PIN6_PC4
-
-static int mma8452_init_platform_hw(void)
-{
-
- if(gpio_request(MMA8452_INT_PIN,NULL) != 0){
- gpio_free(MMA8452_INT_PIN);
- printk("mma8452_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(MMA8452_INT_PIN, 1);
- return 0;
-}
-
-
-static struct mma8452_platform_data mma8452_info = {
- .model= 8452,
- .swap_xy = 0,
- .init_platform_hw= mma8452_init_platform_hw,
-
-};
-#endif
-/*BMA023 gsensor*/
-#if defined (CONFIG_GS_BMA023)
-#define BMA023_INT_PIN RK29_PIN6_PC4
-
-static int bma023_init_platform_hw(void)
-{
-
- if(gpio_request(BMA023_INT_PIN,NULL) != 0){
- gpio_free(BMA023_INT_PIN);
- printk("bma023_init_platform_hw gpio_request error\n");
- return -EIO;
- }
- gpio_pull_updown(BMA023_INT_PIN, 1);
- return 0;
-}
-
-
-static struct bma023_platform_data bma023_info = {
- .model= 023,
- .swap_xy = 0,
- .swap_xyz = 1,
- .orientation = {1,0,0,
- 0,0,1,
- 0,1,0},
- .init_platform_hw= bma023_init_platform_hw,
-
-};
-#endif
-#if defined (CONFIG_MPU_SENSORS_MPU3050)
-/*mpu3050*/
-static struct mpu3050_platform_data mpu3050_data = {
- .int_config = 0x10,
- //.orientation = { 1, 0, 0,0, -1, 0,0, 0, 1 },
- //.orientation = { 0, 1, 0,-1, 0, 0,0, 0, -1 },
- //.orientation = { -1, 0, 0,0, -1, 0,0, 0, -1 },
- //.orientation = { 0, 1, 0, -1, 0, 0, 0, 0, 1 },
- .orientation = { 1, 0, 0,0, 1, 0, 0, 0, 1 },
- .level_shifter = 0,
-#if defined (CONFIG_MPU_SENSORS_KXTF9)
- .accel = {
-#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
- .get_slave_descr = NULL ,
-#else
- .get_slave_descr = get_accel_slave_descr ,
-#endif
- .adapt_num = 0, // The i2c bus to which the mpu device is
- // connected
- //.irq = RK29_PIN6_PC4,
- .bus = EXT_SLAVE_BUS_SECONDARY, //The secondary I2C of MPU
- .address = 0x0f,
- //.orientation = { 1, 0, 0,0, 1, 0,0, 0, 1 },
- //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
- //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
- //.orientation = { 0, 1 ,0, -1 ,0, 0, 0, 0, 1 },
- .orientation = {1, 0, 0, 0, 1, 0, 0, 0, 1},
- },
-#endif
-#if defined (CONFIG_MPU_SENSORS_AK8975)
- .compass = {
-#ifdef CONFIG_MPU_SENSORS_MPU3050_MODULE
- .get_slave_descr = NULL,/*ak5883_get_slave_descr,*/
-#else
- .get_slave_descr = get_compass_slave_descr,
-#endif
- .adapt_num = 0, // The i2c bus to which the compass device is.
- // It can be difference with mpu
- // connected
- //.irq = RK29_PIN6_PC5,
- .bus = EXT_SLAVE_BUS_PRIMARY,
- .address = 0x0d,
- //.orientation = { -1, 0, 0,0, -1, 0,0, 0, 1 },
- //.orientation = { 0, -1, 0,-1, 0, 0,0, 0, -1 },
- //.orientation = { 0, 1, 0,1, 0, 0,0, 0, -1 },
- //.orientation = { 0, -1, 0, 1, 0, 0, 0, 0, 1 },
- .orientation = {0, 1, 0, -1, 0, 0, 0, 0, 1},
- },
-#endif
-};
-#endif
-
-#if defined(CONFIG_GPIO_WM831X)
-struct rk29_gpio_expander_info wm831x_gpio_settinginfo[] = {
- {
- .gpio_num =WM831X_P01,// tp3
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
-
- {
- .gpio_num =WM831X_P02,//tp4
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P03,//tp2
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P04,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P05,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P06,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P07,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P08,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P09,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P10,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P11,//tp1
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
- {
- .gpio_num =WM831X_P12,
- .pin_type = GPIO_OUT,
- .pin_value =GPIO_HIGH,
- },
-};
-
-#endif
-
-
-
-#if defined(CONFIG_MFD_WM831X)
-static struct wm831x *gWm831x;
-int wm831x_pre_init(struct wm831x *parm)
-{
- int ret;
- printk("%s\n", __FUNCTION__);
- gWm831x = parm;
- //ILIM = 900ma
- ret = wm831x_reg_read(parm, WM831X_POWER_STATE) & 0xffff;
- wm831x_reg_write(parm, WM831X_POWER_STATE, (ret&0xfff8) | 0x04);
-
- //BATT_FET_ENA = 1
- wm831x_reg_write(parm,WM831X_SECURITY_KEY,0x9716); // unlock security key
- wm831x_set_bits(parm, WM831X_RESET_CONTROL,0x1000,0x1000);
- ret = wm831x_reg_read(parm, WM831X_RESET_CONTROL) & 0xffff&UNLOCK_SECURITY_KEY;// enternal reset active in sleep
- printk("%s:WM831X_RESET_CONTROL=0x%x\n",__FUNCTION__,ret);
- wm831x_reg_write(parm, WM831X_RESET_CONTROL, ret);
-
-
- wm831x_reg_write(parm,WM831X_SECURITY_KEY,LOCK_SECURITY_KEY); // lock security key
-
-
-#if 0
- wm831x_set_bits(parm, WM831X_LDO_ENABLE, (1 << 3), 0);
- wm831x_set_bits(parm, WM831X_LDO_ENABLE, (1 << 7), 0);
- printk("%s:disable ldo4 and ldo8 because they are enabled in uboot\n",__FUNCTION__);
-#endif
- return 0;
-}
-void cmmb_io_set_for_pm(void);
-int wm831x_post_init(struct wm831x *parm)
-{
- struct regulator *dcdc;
- struct regulator *ldo;
-
- dcdc = regulator_get(NULL, "dcdc3"); // 1th IO
- regulator_set_voltage(dcdc,3000000,3000000);
- regulator_set_suspend_voltage(dcdc, 2800000);
- regulator_enable(dcdc);
- printk("%s set dcdc3=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
- ldo = regulator_get(NULL, "ldo10"); // 1th modem IO
- regulator_set_voltage(ldo,2800000,2800000);
- regulator_set_suspend_voltage(ldo,2800000);
- regulator_enable(ldo);
- printk("%s set ldo10=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- dcdc = regulator_get(NULL, "dcdc2"); // 2th CORE
- regulator_set_voltage(dcdc,1300000,1300000);
- regulator_set_suspend_voltage(dcdc,1000000);
- regulator_enable(dcdc);
- printk("%s set dcdc2=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
- dcdc = regulator_get(NULL, "dcdc1"); // 3th ddr
- regulator_set_voltage(dcdc,1800000,1800000);
- regulator_set_suspend_voltage(dcdc, 1800000);
- regulator_enable(dcdc);
- printk("%s set dcdc1=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-
- ldo = regulator_get(NULL, "ldo1"); // 3th nand
- regulator_set_voltage(ldo,1800000,1800000);
- regulator_set_suspend_voltage(ldo,1800000);
- regulator_enable(ldo);
- printk("%s set ldo1=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- ldo = regulator_get(NULL, "ldo4"); // 4th usb
- regulator_set_voltage(ldo,2500000,2500000);
- regulator_set_suspend_voltage(ldo,0000000);
- regulator_enable(ldo);
- printk("%s set ldo4=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- ldo = regulator_get(NULL, "ldo7"); // 5th usb
- regulator_set_voltage(ldo,3300000,3300000);
- regulator_set_suspend_voltage(ldo,3300000);
- regulator_enable(ldo);
- printk("%s set ldo7=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
- udelay(100);
-
- dcdc = regulator_get(NULL, "dcdc4"); // backlight
- regulator_set_voltage(dcdc,20000000,20000000);
- regulator_set_suspend_voltage(dcdc, 20000000);
- regulator_enable(dcdc);
- printk("%s set dcdc4=%dmV end\n", __FUNCTION__, regulator_get_voltage(dcdc));
- regulator_put(dcdc);
- udelay(100);
-#if 1
-
- ldo = regulator_get(NULL, "ldo2"); //lcd
- regulator_set_voltage(ldo,2800000,2800000);
- regulator_set_suspend_voltage(ldo,2800000);
- regulator_enable(ldo);
- printk("%s set ldo2=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
-
- ldo = regulator_get(NULL, "ldo5"); //tf
- regulator_set_voltage(ldo,3000000,3000000);
- regulator_set_suspend_voltage(ldo,3000000);
- regulator_enable(ldo);
- printk("%s set ldo5=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo6"); //camera
- regulator_set_voltage(ldo,2800000,2800000);
- regulator_set_suspend_voltage(ldo,2800000);
- regulator_enable(ldo);
- printk("%s set ldo6=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
-
-/*
- ldo = regulator_get(NULL, "ldo3"); //sram
- regulator_set_voltage(ldo,1800000,1800000);
- regulator_set_suspend_voltage(ldo,1800000);
- regulator_enable(ldo);
- printk("%s set ldo3=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo); */
-
-
-
-#endif
-
- ldo = regulator_get(NULL, "ldo11");
- //regulator_enable(ldo);
- printk("%s set ldo11=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
-#if defined(CONFIG_SMS_SPI_ROCKCHIP)
- cmmb_io_set_for_pm();
-#endif
-
- return 0;
-}
-
-extern void wm831x_enter_sleep(void);
-extern void wm831x_exit_sleep(void);
-
-void pmu_wm831x_set_suspend_voltage(void)
-{
-
-}
-EXPORT_SYMBOL_GPL(pmu_wm831x_set_suspend_voltage);
-
-void pmu_wm831x_set_resume_voltage(void)
-{
-
-}
-EXPORT_SYMBOL_GPL(pmu_wm831x_set_resume_voltage);
-
-int wm831x_last_deinit(struct wm831x *parm)
-{
- struct regulator* ldo;
-
- printk("%s\n", __FUNCTION__);
- ldo = regulator_get(NULL, "ldo1");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo2");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo3");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo4");
- //regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo5");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo6");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo7");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo8");
- //regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo9");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo10");
- regulator_disable(ldo);
- regulator_put(ldo);
-
- return 0;
-}
-
-struct wm831x_backlight_pdata wm831x_backlight_platdata = {
- .isink = 1, /** ISINK to use, 1 or 2 */
- .max_uA = 19484, /** Maximum current to allow */
-};
-
-struct wm831x_backup_pdata wm831x_backup_platdata = {
- .charger_enable = 1,
- .no_constant_voltage = 0, /** Disable constant voltage charging */
- .vlim = 3100, /** Voltage limit in milivolts */
- .ilim = 300, /** Current limit in microamps */
-};
-
-struct wm831x_battery_pdata wm831x_battery_platdata = {
- .enable = 1, /** Enable charging */
- .fast_enable = 1, /** Enable fast charging */
- .off_mask = 1, /** Mask OFF while charging */
- .trickle_ilim = 200, /** Trickle charge current limit, in mA */
- .vsel = 4200, /** Target voltage, in mV */
- .eoc_iterm = 50, /** End of trickle charge current, in mA */
- .fast_ilim = 500, /** Fast charge current limit, in mA */
- .timeout = 480, /** Charge cycle timeout, in minutes */
- .syslo = 3500, /* syslo threshold, in mV*/
- .sysok = 3500, /* sysko threshold, in mV*/
-};
-
-struct wm831x_status_pdata wm831x_status_platdata[WM831X_MAX_STATUS] = {
- {
- .default_src = WM831X_STATUS_OTP,
- .name = "wm831x_status0",
- .default_trigger = "wm831x_otp",
- },
- {
- .default_src = WM831X_STATUS_POWER,
- .name = "wm831x_status1",
- .default_trigger = "wm831x_power",
- },
-};
-
-
-static struct regulator_consumer_supply dcdc1_consumers[] = {
- {
- .supply = "dcdc1",
- }
-};
-static struct regulator_consumer_supply dcdc2_consumers[] = {
- {
- .supply = "dcdc2",
- },
- {
- .supply = "vcore",
- }
-};
-static struct regulator_consumer_supply dcdc3_consumers[] = {
- {
- .supply = "dcdc3",
- }
-};
-static struct regulator_consumer_supply dcdc4_consumers[] = {
- {
- .supply = "dcdc4",
- }
-};
-static struct regulator_consumer_supply epe1_consumers[] = {
- {
- .supply = "epe1",
- }
-};
-static struct regulator_consumer_supply epe2_consumers[] = {
- {
- .supply = "epe2",
- }
-};
-static struct regulator_consumer_supply ldo1_consumers[] = {
- {
- .supply = "ldo1",
- }
-};
-static struct regulator_consumer_supply ldo2_consumers[] = {
- {
- .supply = "ldo2",
- }
-};
-static struct regulator_consumer_supply ldo3_consumers[] = {
- {
- .supply = "ldo3",
- }
-};
-static struct regulator_consumer_supply ldo4_consumers[] = {
- {
- .supply = "ldo4",
- }
-};
-static struct regulator_consumer_supply ldo5_consumers[] = {
- {
- .supply = "ldo5",
- }
-};
-static struct regulator_consumer_supply ldo6_consumers[] = {
- {
- .supply = "ldo6",
- }
-};
-static struct regulator_consumer_supply ldo7_consumers[] = {
- {
- .supply = "ldo7",
- }
-};
-static struct regulator_consumer_supply ldo8_consumers[] = {
- {
- .supply = "ldo8",
- }
-};
-static struct regulator_consumer_supply ldo9_consumers[] = {
- {
- .supply = "ldo9",
- }
-};
-static struct regulator_consumer_supply ldo10_consumers[] = {
- {
- .supply = "ldo10",
- }
-};
-static struct regulator_consumer_supply ldo11_consumers[] = {
- {
- .supply = "ldo11",
- }
-};
-static struct regulator_consumer_supply isink1_consumers[] = {
- {
- .supply = "isink1",
- }
-};
-static struct regulator_consumer_supply isink2_consumers[] = {
- {
- .supply = "isink2",
- }
-};
-
-struct regulator_init_data wm831x_regulator_init_dcdc[WM831X_MAX_DCDC] = {
- {
- .constraints = {
- .name = "DCDC1",
- .min_uV = 600000,
- .max_uV = 1800000,//0.6-1.8V
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc1_consumers),
- .consumer_supplies = dcdc1_consumers,
- },
- {
- .constraints = {
- .name = "DCDC2",
- .min_uV = 600000,
- .max_uV = 1800000,//0.6-1.8V
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc2_consumers),
- .consumer_supplies = dcdc2_consumers,
- },
- {
- .constraints = {
- .name = "DCDC3",
- .min_uV = 850000,
- .max_uV = 3400000,//0.85-3.4V
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc3_consumers),
- .consumer_supplies = dcdc3_consumers,
- },
- {
- .constraints = {
- .name = "DCDC4",
- .min_uV = 00000000,
- .max_uV = 30000000,//30V/40mA
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc4_consumers),
- .consumer_supplies = dcdc4_consumers,
- },
-
-};
-struct regulator_init_data wm831x_regulator_init_epe[WM831X_MAX_EPE] = {
- {
- .constraints = {
- .name = "EPE1",
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(epe1_consumers),
- .consumer_supplies = epe1_consumers,
- },
- {
- .constraints = {
- .name = "EPE2",
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(epe2_consumers),
- .consumer_supplies = epe2_consumers,
- },
-};
-
-struct regulator_init_data wm831x_regulator_init_ldo[WM831X_MAX_LDO] = {
- {
- .constraints = {
- .name = "LDO1",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo1_consumers),
- .consumer_supplies = ldo1_consumers,
- },
- {
- .constraints = {
- .name = "LDO2",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
- .consumer_supplies = ldo2_consumers,
- },
- {
- .constraints = {
- .name = "LDO3",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo3_consumers),
- .consumer_supplies = ldo3_consumers,
- },
- {
- .constraints = {
- .name = "LDO4",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
- .consumer_supplies = ldo4_consumers,
- },
- {
- .constraints = {
- .name = "LDO5",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
- .consumer_supplies = ldo5_consumers,
- },
- {
- .constraints = {
- .name = "LDO6",
- .min_uV = 900000,
- .max_uV = 3300000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
- .consumer_supplies = ldo6_consumers,
- },
- {
- .constraints = {
- .name = "LDO7",
- .min_uV = 1000000,
- .max_uV = 3500000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo7_consumers),
- .consumer_supplies = ldo7_consumers,
- },
- {
- .constraints = {
- .name = "LDO8",
- .min_uV = 1000000,
- .max_uV = 3500000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo8_consumers),
- .consumer_supplies = ldo8_consumers,
- },
- {
- .constraints = {
- .name = "LDO9",
- .min_uV = 1000000,
- .max_uV = 3500000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo9_consumers),
- .consumer_supplies = ldo9_consumers,
- },
- {
- .constraints = {
- .name = "LDO10",
- .min_uV = 1000000,
- .max_uV = 3500000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo10_consumers),
- .consumer_supplies = ldo10_consumers,
- },
- {
- .constraints = {
- .name = "LDO11",
- .min_uV = 1200000,
- .max_uV = 3000000,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo11_consumers),
- .consumer_supplies = ldo11_consumers,
- },
-};
-
-struct regulator_init_data wm831x_regulator_init_isink[WM831X_MAX_ISINK] = {
- {
- .constraints = {
- .name = "ISINK1",
- .min_uA = 00000,
- .max_uA = 40000,
- .always_on = true,
- .apply_uV = true,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(isink1_consumers),
- .consumer_supplies = isink1_consumers,
- },
- {
- .constraints = {
- .name = "ISINK2",
- .min_uA = 0000000,
- .max_uA = 0000000,
- .apply_uV = false,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(isink2_consumers),
- .consumer_supplies = isink2_consumers,
- },
-};
-
-static int wm831x_checkrange(int start,int num,int val)
-{
- if((val<(start+num))&&(val>=start))
- return 0;
- else
- return -1;
-}
-
-static int wm831x_init_pin_type(struct wm831x *wm831x)
-{
-#if 1
- struct wm831x_pdata *pdata = wm831x->dev->platform_data;
- struct rk29_gpio_expander_info *wm831x_gpio_settinginfo;
- uint16_t offset = 0;
- uint16_t wm831x_settingpin_num = 0;
- uint16_t ret = 0;
- int i = 0;
-
- if(wm831x)
- {
- wm831x_gpio_settinginfo=pdata->settinginfo;
- if(wm831x_gpio_settinginfo)
- {
- wm831x_settingpin_num = pdata->settinginfolen;
- for(i=0;i<wm831x_settingpin_num;i++)
- {
- if(!wm831x_checkrange(pdata->gpio_base,pdata->gpio_pin_num,wm831x_gpio_settinginfo[i].gpio_num))
- {
- offset = wm831x_gpio_settinginfo[i].gpio_num - pdata->gpio_base;
-
- if(wm831x_gpio_settinginfo[i].pin_type==GPIO_IN)
- {
- wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+offset), WM831X_GPN_DIR_MASK|WM831X_GPN_TRI_MASK, 1<<WM831X_GPN_DIR_SHIFT|1<<WM831X_GPN_TRI_SHIFT);
- }
- else
- {
- wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+offset), WM831X_GPN_DIR_MASK|WM831X_GPN_TRI_MASK, 1<<WM831X_GPN_TRI_SHIFT);
- if(wm831x_gpio_settinginfo[i].pin_value==GPIO_HIGH)
- {
- wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, (1 << offset),(1 << offset));
- }
- else
- {
- wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, (1 << offset),(0 << offset));
- }
- }
-
- }
- }
- }
- }
-
- for(i=0;i<pdata->gpio_pin_num;i++)
- {
- wm831x_set_bits(wm831x,(WM831X_GPIO1_CONTROL+i),
- WM831X_GPN_PULL_MASK|WM831X_GPN_POL_MASK|WM831X_GPN_OD_MASK|WM831X_GPN_TRI_MASK,
- 1<<WM831X_GPN_POL_SHIFT|1<<WM831X_GPN_TRI_SHIFT);
- ret = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL+i);
- printk("Gpio%d Pin Configuration = %x\n",i,ret);
- }
-#endif
- return 0;
-}
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_WM831X_GPIO)
-static struct wm831x_gpio_keys_button wm831x_gpio_buttons[] = {
-{
- .code = KEY_MEDIA,
- .gpio = TCA6424_P21,
- .active_low = 1,
- .desc = "media",
- .wakeup = 0,
- .debounce_interval = 120,
-},
-{
- .code= KEY_VOLUMEUP,
- .gpio= WM831X_P05,
- .active_low= 1,
- .desc= "volume_up",
- .wakeup= 0,
-},
-{
- .code= KEY_CAMERA,
- .gpio= WM831X_P06,
- .active_low= 1,
- .desc= "camera",
- .wakeup= 0,
-},
-{
- .code= KEY_VOLUMEDOWN,
- .gpio= WM831X_P07,
- .active_low= 1,
- .desc= "volume_down",
- .wakeup= 0,
-},
-{
- .code= KEY_END,
- .gpio= WM831X_P09,
- .active_low= 1,
- .desc= "enter",
- .wakeup= 0,
-},
-{
- .code= KEY_MENU,
- .gpio= WM831X_P10,
- .active_low= 1,
- .desc= "menu",
- .wakeup= 0,
-},
-{
- .code= KEY_SEND,
- .gpio= WM831X_P11,
- .active_low= 1,
- .desc= "esc",
- .wakeup= 0,
-},
-{
- .code= KEY_BACK,
- .gpio= WM831X_P12,
- .active_low= 1,
- .desc= "home",
- .wakeup= 0,
-},
-};
-
-struct wm831x_gpio_keys_pdata wm831x_gpio_keys_platdata = {
- .buttons = wm831x_gpio_buttons,
- .nbuttons = ARRAY_SIZE(wm831x_gpio_buttons),
-};
-
-#endif
-struct wm831x_pdata wm831x_platdata = {
- /** Called before subdevices are set up */
- .pre_init= wm831x_pre_init,
- /** Called after subdevices are set up */
- .post_init = wm831x_post_init,
- /** Called before subdevices are power down */
- .last_deinit = wm831x_last_deinit,
-
-#if defined(CONFIG_GPIO_WM831X)
- .gpio_base=WM831X_GPIO_EXPANDER_BASE,
- .gpio_pin_num=WM831X_TOTOL_GPIO_NUM,
- .settinginfo=wm831x_gpio_settinginfo,
- .settinginfolen=ARRAY_SIZE(wm831x_gpio_settinginfo),
- .pin_type_init = wm831x_init_pin_type,
- .irq_base= NR_AIC_IRQS + 7*NUM_GROUP,
-#endif
-
- .backlight = &wm831x_backlight_platdata,
-
- .backup = &wm831x_backup_platdata,
-
- .battery = &wm831x_battery_platdata,
- //.wm831x_touch_pdata = NULL,
- //.watchdog = NULL,
-
-#if defined(CONFIG_KEYBOARD_WM831X_GPIO)
- .gpio_keys = &wm831x_gpio_keys_platdata,
-#endif
-
- /** LED1 = 0 and so on */
- .status = {&wm831x_status_platdata[0], &wm831x_status_platdata[1]},
-
- /** DCDC1 = 0 and so on */
- .dcdc = {&wm831x_regulator_init_dcdc[0], &wm831x_regulator_init_dcdc[1], &wm831x_regulator_init_dcdc[2], &wm831x_regulator_init_dcdc[3]},
-
- /** EPE1 = 0 and so on */
- .epe = {&wm831x_regulator_init_epe[0], &wm831x_regulator_init_epe[1]},
-
- /** LDO1 = 0 and so on */
- .ldo = {&wm831x_regulator_init_ldo[0], &wm831x_regulator_init_ldo[1], &wm831x_regulator_init_ldo[2], &wm831x_regulator_init_ldo[3],
- &wm831x_regulator_init_ldo[4], &wm831x_regulator_init_ldo[5], &wm831x_regulator_init_ldo[6], &wm831x_regulator_init_ldo[7],
- &wm831x_regulator_init_ldo[8], &wm831x_regulator_init_ldo[9], &wm831x_regulator_init_ldo[10]},
-
- /** ISINK1 = 0 and so on*/
- .isink = {&wm831x_regulator_init_isink[0], &wm831x_regulator_init_isink[1]},
-};
-#endif
-
-
-
-#if defined(CONFIG_RK29_GPS)
-
-#define RK29_GPS_POWER_PIN RK29_PIN6_PB2
-#define RK29_GPS_RESET_PIN RK29_PIN6_PC1
-
-int rk29_gps_power_up(void)
-{
- printk("%s \n", __FUNCTION__);
-
- gpio_request(RK29_GPS_POWER_PIN, NULL);
- gpio_direction_output(RK29_GPS_POWER_PIN, GPIO_HIGH);
-
- return 0;
-}
-
-int rk29_gps_power_down(void)
-{
- printk("%s \n", __FUNCTION__);
-
- gpio_request(RK29_GPS_POWER_PIN, NULL);
- gpio_direction_output(RK29_GPS_POWER_PIN, GPIO_LOW);
-
- return 0;
-}
-
-int rk29_gps_reset_set(int level)
-{
- gpio_request(RK29_GPS_RESET_PIN, NULL);
- if (level)
- gpio_direction_output(RK29_GPS_RESET_PIN, GPIO_HIGH);
- else
- gpio_direction_output(RK29_GPS_RESET_PIN, GPIO_LOW);
-
- return 0;
-}
-
-struct rk29_gps_data rk29_gps_info = {
- .power_up = rk29_gps_power_up,
- .power_down = rk29_gps_power_down,
- .reset = rk29_gps_reset_set,
- .uart_id = 3,
-};
-
-struct platform_device rk29_device_gps = {
- .name = "rk29_gps",
- .id = -1,
- .dev = {
- .platform_data = &rk29_gps_info,
- }
- };
-#endif
-
-/*****************************************************************************************
- * wm8994 codec
- * author: qjb@rock-chips.com
- *****************************************************************************************/
-struct wm8994_pdata wm8994_platdata = {
-
- .BB_input_diff = 1,
- .BB_class = NO_PCM_BB,
-
- .no_earpiece = 0,
- .sp_hp_same_channel = 0,
-
- .PA_control_pin = 0,
- .Power_EN_Pin = RK29_PIN5_PA1,
-
- .speaker_incall_vol = 12,
- .speaker_incall_mic_vol = -9,
- .speaker_normal_vol = 6,
- .earpiece_incall_vol = 6,
- .headset_incall_vol = 6,
- .headset_incall_mic_vol = -6,
- .headset_normal_vol = -6,
- .BT_incall_vol = 0,
- .BT_incall_mic_vol = 0,
- .recorder_vol = 30,
-
-};
-
-
-#ifdef CONFIG_RK_HEADSET_DET
-#define HEADSET_GPIO RK29_PIN4_PD2
-struct rk_headset_pdata rk_headset_info = {
- .Headset_gpio = RK29_PIN4_PD2,
- .headset_in_type= HEADSET_IN_HIGH,
- .Hook_gpio = RK29_PIN6_PB6,//Detection Headset--Must be set
- .hook_key_code = KEY_MEDIA,
-};
-
-struct platform_device rk_device_headset = {
- .name = "rk_headsetdet",
- .id = 0,
- .dev = {
- .platform_data = &rk_headset_info,
- }
-};
-#endif
-
-#if defined(CONFIG_GS_L3G4200D)
-
-#include <linux/l3g4200d.h>
-#define L3G4200D_INT_PIN RK29_PIN5_PA3
-
-static int l3g4200d_init_platform_hw(void)
-{
- if (gpio_request(L3G4200D_INT_PIN, NULL) != 0) {
- gpio_free(L3G4200D_INT_PIN);
- printk("%s: request l3g4200d int pin error\n", __func__);
- return -EIO;
- }
- gpio_pull_updown(L3G4200D_INT_PIN, 1);
- return 0;
-}
-
-static struct l3g4200d_platform_data l3g4200d_info = {
- .fs_range = 1,
-
- .axis_map_x = 0,
- .axis_map_y = 1,
- .axis_map_z = 2,
-
- .negate_x = 1,
- .negate_y = 1,
- .negate_z = 0,
-
- .init = l3g4200d_init_platform_hw,
-};
-
-#endif
-
-/*****************************************************************************************
- * i2c devices
- * author: kfx@rock-chips.com
-*****************************************************************************************/
-static int rk29_i2c0_io_init(void)
-{
-#ifdef CONFIG_RK29_I2C0_CONTROLLER
- rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_I2C0_SCL);
- rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_I2C0_SDA);
-#else
- rk29_mux_api_set(GPIO2B7_I2C0SCL_NAME, GPIO2L_GPIO2B7);
- rk29_mux_api_set(GPIO2B6_I2C0SDA_NAME, GPIO2L_GPIO2B6);
-#endif
- return 0;
-}
-
-static int rk29_i2c1_io_init(void)
-{
-#ifdef CONFIG_RK29_I2C1_CONTROLLER
- rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_I2C1_SCL);
- rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_I2C1_SDA);
-#else
- rk29_mux_api_set(GPIO1A7_I2C1SCL_NAME, GPIO1L_GPIO1A7);
- rk29_mux_api_set(GPIO1A6_I2C1SDA_NAME, GPIO1L_GPIO1A6);
-#endif
- return 0;
-}
-static int rk29_i2c2_io_init(void)
-{
-#ifdef CONFIG_RK29_I2C2_CONTROLLER
- rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_I2C2_SCL);
- rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_I2C2_SDA);
-#else
- rk29_mux_api_set(GPIO5D4_I2C2SCL_NAME, GPIO5H_GPIO5D4);
- rk29_mux_api_set(GPIO5D3_I2C2SDA_NAME, GPIO5H_GPIO5D3);
-#endif
- return 0;
-}
-
-static int rk29_i2c3_io_init(void)
-{
-#ifdef CONFIG_RK29_I2C3_CONTROLLER
- rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_I2C3_SCL);
- rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_I2C3_SDA);
-#else
- rk29_mux_api_set(GPIO2B5_UART3RTSN_I2C3SCL_NAME, GPIO2L_GPIO2B5);
- rk29_mux_api_set(GPIO2B4_UART3CTSN_I2C3SDA_NAME, GPIO2L_GPIO2B4);
-#endif
- return 0;
-}
-#ifdef CONFIG_RK29_I2C0_CONTROLLER
-struct rk29_i2c_platform_data default_i2c0_data = {
- .bus_num = 0,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c0_io_init,
-};
-#else
-struct i2c_gpio_platform_data default_i2c0_data = {
- .sda_pin = RK29_PIN2_PB6,
- .scl_pin = RK29_PIN2_PB7,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(200),
- .bus_num = 0,
- .io_init = rk29_i2c0_io_init,
-};
-#endif
-#ifdef CONFIG_RK29_I2C1_CONTROLLER
-struct rk29_i2c_platform_data default_i2c1_data = {
- .bus_num = 1,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c1_io_init,
-};
-#else
-struct i2c_gpio_platform_data default_i2c1_data = {
- .sda_pin = RK29_PIN1_PA6,
- .scl_pin = RK29_PIN1_PA7,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(200),
- .bus_num = 1,
- .io_init = rk29_i2c1_io_init,
-};
-#endif
-#ifdef CONFIG_RK29_I2C2_CONTROLLER
-struct rk29_i2c_platform_data default_i2c2_data = {
- .bus_num = 2,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c2_io_init,
-};
-#else
-struct i2c_gpio_platform_data default_i2c2_data = {
- .sda_pin = RK29_PIN5_PD3,
- .scl_pin = RK29_PIN5_PD4,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(200),
- .bus_num = 2,
- .io_init = rk29_i2c2_io_init,
-};
-#endif
-#ifdef CONFIG_RK29_I2C3_CONTROLLER
-struct rk29_i2c_platform_data default_i2c3_data = {
- .bus_num = 3,
- .flags = 0,
- .slave_addr = 0xff,
- .scl_rate = 400*1000,
- .mode = I2C_MODE_IRQ,
- .io_init = rk29_i2c3_io_init,
-};
-#else
-struct i2c_gpio_platform_data default_i2c3_data = {
- .sda_pin = RK29_PIN5_PB5,
- .scl_pin = RK29_PIN5_PB4,
- .udelay = 5, // clk = 500/udelay = 100Khz
- .timeout = 100,//msecs_to_jiffies(200),
- .bus_num = 3,
- .io_init = rk29_i2c3_io_init,
-};
-#endif
-#ifdef CONFIG_I2C0_RK29
-static struct i2c_board_info __initdata board_i2c0_devices[] = {
-#if defined (CONFIG_RK1000_CONTROL)
- {
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_RK1000)
- {
- .type = "rk1000_i2c_codec",
- .addr = 0x60,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_WM8900)
- {
- .type = "wm8900",
- .addr = 0x1A,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_SND_SOC_WM8994)
- {
- .type = "wm8994",
- .addr = 0x1a,
- .flags = 0,
-// #if defined(CONFIG_MFD_WM8994)
- .platform_data = &wm8994_platdata,
-// #endif
- },
-#endif
-#if defined (CONFIG_BATTERY_STC3100)
- {
- .type = "stc3100",
- .addr = 0x70,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_BATTERY_BQ27510)
- {
- .type = "bq27510",
- .addr = 0x55,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_RTC_HYM8563)
- {
- .type = "rtc_hym8563",
- .addr = 0x51,
- .flags = 0,
- .irq = RK29_PIN0_PA1,
- },
-#endif
-#if defined (CONFIG_GS_MMA8452)
- {
- .type = "gs_mma8452",
- .addr = 0x1c,
- .flags = 0,
- .irq = MMA8452_INT_PIN,
- .platform_data = &mma8452_info,
- },
-#endif
-#if defined (CONFIG_GS_BMA023)
- {
- .type = "bma150",
- .addr = 0x38,
- .flags = 0,
- .irq = BMA023_INT_PIN,
- .platform_data = &bma023_info,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8973)
- {
- .type = "ak8973",
- .addr = 0x1d,
- .flags = 0,
- .irq = RK29_PIN6_PC5,
- },
-#endif
-#if defined (CONFIG_COMPASS_AK8975)
- {
- .type = "ak8975",
- .addr = 0x0d,
- .flags = 0,
- .irq = RK29_PIN6_PC5,
- },
-#endif
-#if defined (CONFIG_INPUT_LPSENSOR_ISL29028)
- {
- .type = "isl29028",
- .addr = 0x44,
- .flags = 0,
- .irq = RK29_PIN4_PD3,
- },
-#endif
-#if defined (CONFIG_INPUT_LPSENSOR_AL3006)
- {
- .type = "al3006",
- .addr = 0x1C, //sel = 0; if sel =1, then addr = 0x1D
- .flags = 0,
- .irq = RK29_PIN4_PD3,
- },
-#endif
-#if defined (CONFIG_ANX7150)
- {
- .type = "anx7150",
- .addr = 0x39, //0x39, 0x3d
- .flags = 0,
- .irq = RK29_PIN2_PA3,
- },
-#endif
-#if defined (CONFIG_GS_L3G4200D)
- {
- .type = "gs_l3g4200d",
- .addr = 0x69,
- .flags = 0,
- .irq = L3G4200D_INT_PIN,
- .platform_data = &l3g4200d_info,
- },
-#endif
-#if defined (CONFIG_MPU_SENSORS_MPU3050)
- {
- .type = "mpu3050",
- .addr = 0x68,
- .flags = 0,
- .irq = RK29_PIN4_PC4,
- .platform_data = &mpu3050_data,
- },
-#endif
-};
-#endif
-
-#ifdef CONFIG_I2C1_RK29
-static struct i2c_board_info __initdata board_i2c1_devices[] = {
-#if defined (CONFIG_RK1000_CONTROL1)
- {
- .type = "rk1000_control",
- .addr = 0x40,
- .flags = 0,
- },
-#endif
-#if defined (CONFIG_MFD_WM831X_I2C)
- {
- .type = "wm8310",
- .addr = 0x34,
- .flags = 0,
- .irq = RK29_PIN4_PD0,
- .platform_data = &wm831x_platdata,
- },
-#endif
-
-};
-#endif
-
-#ifdef CONFIG_I2C2_RK29
-static struct i2c_board_info __initdata board_i2c2_devices[] = {
-#if defined (CONFIG_TOUCHSCREEN_GT801_IIC)
-{
- .type = "gt801_ts",
- .addr = 0x55,
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = >801_info,
-},
-#endif
-
-#if defined (CONFIG_TOUCHSCREEN_GT818_IIC)
-{
- .type = "gt818_ts",
- .addr = 0x5d,
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = >818_info,
-},
-#endif
-
-#if defined (CONFIG_TOUCHSCREEN_ILI2102_IIC)
-{
- .type = "ili2102_ts",
- .addr = 0x41,
- .flags = I2C_M_NEED_DELAY,
- .udelay = 600,
- .irq = RK29_PIN4_PD5,
- .platform_data = &ili2102_info,
-},
-#endif
-#if defined (CONFIG_HANNSTAR_P1003)
- {
- .type = "p1003_touch",
- .addr = 0x04,
- .flags = 0,
- .irq = RK29_PIN0_PA2,
- .platform_data = &p1003_info,
- },
-#endif
-#if defined (CONFIG_EETI_EGALAX)
- {
- .type = "egalax_i2c",
- .addr = 0x04,
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = &eeti_egalax_info,
- },
-#endif
-#if defined (CONFIG_TOUCHSCREEN_PIXCIR)
- {
- .type = "pixcir_ts",
- .addr = 0x5c,
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = &pixcir_info,
- },
-#endif
-#if defined (CONFIG_TOUCHSCREEN_FT5X0X)
- {
- .type = "ft5x0x_ts",
- .addr = (0x70>>1),
- .flags = 0,
- .irq = RK29_PIN4_PD5,
- .platform_data = &ft5x0x_info,
- },
-#endif
-};
-#endif
-
-#ifdef CONFIG_I2C3_RK29
-static struct i2c_board_info __initdata board_i2c3_devices[] = {
- //I2c3 only for camera
-};
-#endif
-
-/*****************************************************************************************
- * camera devices
- * author: ddl@rock-chips.com
- *****************************************************************************************/
-#ifdef CONFIG_VIDEO_RK29
-#define CONFIG_SENSOR_POWER_IOCTL_USR 0
-#define CONFIG_SENSOR_RESET_IOCTL_USR 0
-#define CONFIG_SENSOR_POWERDOWN_IOCTL_USR 0
-#define CONFIG_SENSOR_FLASH_IOCTL_USR 1
-
-#if CONFIG_SENSOR_POWER_IOCTL_USR
-static int sensor_power_usr_cb (struct rk29camera_gpio_res *res,int on)
-{
- #error "CONFIG_SENSOR_POWER_IOCTL_USR is 1, sensor_power_usr_cb function must be writed!!";
-}
-#endif
-
-#if CONFIG_SENSOR_RESET_IOCTL_USR
-static int sensor_reset_usr_cb (struct rk29camera_gpio_res *res,int on)
-{
- #error "CONFIG_SENSOR_RESET_IOCTL_USR is 1, sensor_reset_usr_cb function must be writed!!";
-}
-#endif
-
-#if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
-static int sensor_powerdown_usr_cb (struct rk29camera_gpio_res *res,int on)
-{
- #error "CONFIG_SENSOR_POWERDOWN_IOCTL_USR is 1, sensor_powerdown_usr_cb function must be writed!!";
-}
-#endif
-
-#if CONFIG_SENSOR_FLASH_IOCTL_USR
-static int sensor_flash_usr_cb (struct rk29camera_gpio_res *res,int on)
-{
- //#error "CONFIG_SENSOR_FLASH_IOCTL_USR is 1, sensor_flash_usr_cb function must be writed!!";
- int ret;
- ret = gpio_request(RK29_PIN0_PD1, NULL);
- if(ret != 0)
- {
- gpio_free(RK29_PIN0_PD1);
- printk("sensor_flash_usr_cb error!!\n");
- return 0;
- }
- ret = gpio_request(RK29_PIN6_PB5, NULL);
- if(ret != 0)
- {
- gpio_free(RK29_PIN6_PB5);
- printk("sensor_flash_usr_cb error!!\n");
- return 0;
- }
- if(on) {
- gpio_direction_output(RK29_PIN0_PD1, GPIO_HIGH);
- gpio_set_value(RK29_PIN0_PD1, 1);
-
- gpio_direction_output(RK29_PIN6_PB5, GPIO_HIGH);
- gpio_set_value(RK29_PIN6_PB5, 1);
- }
- else
- {
- gpio_direction_output(RK29_PIN0_PD1, GPIO_HIGH);
- gpio_set_value(RK29_PIN0_PD1, 0);
-
- gpio_direction_output(RK29_PIN6_PB5, GPIO_HIGH);
- gpio_set_value(RK29_PIN6_PB5, 0);
- }
- gpio_free(RK29_PIN0_PD1);
- gpio_free(RK29_PIN6_PB5);
- return 0;
-}
-#endif
-
-static struct rk29camera_platform_ioctl_cb sensor_ioctl_cb = {
- #if CONFIG_SENSOR_POWER_IOCTL_USR
- .sensor_power_cb = sensor_power_usr_cb,
- #else
- .sensor_power_cb = NULL,
- #endif
-
- #if CONFIG_SENSOR_RESET_IOCTL_USR
- .sensor_reset_cb = sensor_reset_usr_cb,
- #else
- .sensor_reset_cb = NULL,
- #endif
-
- #if CONFIG_SENSOR_POWERDOWN_IOCTL_USR
- .sensor_powerdown_cb = sensor_powerdown_usr_cb,
- #else
- .sensor_powerdown_cb = NULL,
- #endif
-
- #if CONFIG_SENSOR_FLASH_IOCTL_USR
- .sensor_flash_cb = sensor_flash_usr_cb,
- #else
- .sensor_flash_cb = NULL,
- #endif
-};
-#include "../../../drivers/media/video/rk29_camera.c"
-#endif
-
-/*****************************************************************************************
- * backlight devices
- * author: nzy@rock-chips.com
- *****************************************************************************************/
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- /*
- GPIO1B5_PWM0_NAME, GPIO1L_PWM0
- GPIO5D2_PWM1_UART1SIRIN_NAME, GPIO5H_PWM1
- GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME, GPIO2L_PWM2
- GPIO1A5_EMMCPWREN_PWM3_NAME, GPIO1L_PWM3
- */
-
-#define PWM_ID 0
-#define PWM_MUX_NAME GPIO1B5_PWM0_NAME
-#define PWM_MUX_MODE GPIO1L_PWM0
-#define PWM_MUX_MODE_GPIO GPIO1L_GPIO1B5
-#define PWM_EFFECT_VALUE 1
-
-//#define LCD_DISP_ON_PIN
-
-#ifdef LCD_DISP_ON_PIN
-#define BL_EN_MUX_NAME GPIOF34_UART3_SEL_NAME
-#define BL_EN_MUX_MODE IOMUXB_GPIO1_B34
-
-#define BL_EN_PIN GPIO0L_GPIO0A5
-#define BL_EN_VALUE GPIO_HIGH
-#endif
-static int rk29_backlight_io_init(void)
-{
- int ret = 0;
-
- rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE);
- #ifdef LCD_DISP_ON_PIN
- rk29_mux_api_set(BL_EN_MUX_NAME, BL_EN_MUX_MODE);
-
- ret = gpio_request(BL_EN_PIN, NULL);
- if(ret != 0)
- {
- gpio_free(BL_EN_PIN);
- }
-
- gpio_direction_output(BL_EN_PIN, 0);
- gpio_set_value(BL_EN_PIN, BL_EN_VALUE);
- #endif
- return ret;
-}
-
-static int rk29_backlight_io_deinit(void)
-{
- int ret = 0;
- #ifdef LCD_DISP_ON_PIN
- gpio_free(BL_EN_PIN);
- #endif
- rk29_mux_api_set(PWM_MUX_NAME, PWM_MUX_MODE_GPIO);
- return ret;
-}
-struct rk29_bl_info rk29_bl_info = {
- .pwm_id = PWM_ID,
- .bl_ref = PWM_EFFECT_VALUE,
- .io_init = rk29_backlight_io_init,
- .io_deinit = rk29_backlight_io_deinit,
-};
-#endif
-/*****************************************************************************************
-* pwm voltage regulator devices
-******************************************************************************************/
-#if defined (CONFIG_RK29_PWM_REGULATOR)
-
-#define REGULATOR_PWM_ID 2
-#define REGULATOR_PWM_MUX_NAME GPIO2A3_SDMMC0WRITEPRT_PWM2_NAME
-#define REGULATOR_PWM_MUX_MODE GPIO2L_PWM2
-#define REGULATOR_PWM_MUX_MODE_GPIO GPIO2L_GPIO2A3
-#define REGULATOR_PWM_GPIO RK29_PIN2_PA3
-
-static struct regulator_consumer_supply pwm_consumers[] = {
- {
- .supply = "vcore",
- }
-};
-
-static struct regulator_init_data rk29_pwm_regulator_data = {
- .constraints = {
- .name = "PWM2",
- .min_uV = 950000,
- .max_uV = 1400000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(pwm_consumers),
- .consumer_supplies = pwm_consumers,
-};
-
-static struct pwm_platform_data rk29_regulator_pwm_platform_data = {
- .pwm_id = REGULATOR_PWM_ID,
- .pwm_gpio = REGULATOR_PWM_GPIO,
- //.pwm_iomux_name[] = REGULATOR_PWM_MUX_NAME;
- .pwm_iomux_name = REGULATOR_PWM_MUX_NAME,
- .pwm_iomux_pwm = REGULATOR_PWM_MUX_MODE,
- .pwm_iomux_gpio = REGULATOR_PWM_MUX_MODE_GPIO,
- .init_data = &rk29_pwm_regulator_data,
-};
-
-static struct platform_device rk29_device_pwm_regulator = {
- .name = "pwm-voltage-regulator",
- .id = -1,
- .dev = {
- .platform_data = &rk29_regulator_pwm_platform_data,
- },
-};
-
-#endif
-#define POWER_ON_PIN RK29_PIN4_PA4
-#define BP_VOL_PIN RK29_PIN6_PD3
-
-#if defined(CONFIG_TDSC8800)
-
-static int tdsc8800_io_init(void)
-{
-
- return 0;
-}
-
-static int tdsc8800_io_deinit(void)
-{
-
- return 0;
-}
-
-struct rk2818_23d_data rk29_tdsc8800_info = {
- .io_init = tdsc8800_io_init,
- .io_deinit = tdsc8800_io_deinit,
- .bp_power = BP_VOL_PIN,
- .bp_power_active_low = 1,
-};
-struct platform_device rk29_device_tdsc8800 = {
- .name = "tdsc8800",
- .id = -1,
- .dev = {
- .platform_data = &rk29_tdsc8800_info,
- }
- };
-#endif
-
-
-/*****************************************************************************************
- * SDMMC devices
-*****************************************************************************************/
-#if !defined(CONFIG_SDMMC_RK29_OLD)
-static void rk29_sdmmc_gpio_open(int device_id, int on)
-{
- switch(device_id)
- {
- case 0://mmc0
- {
- #ifdef CONFIG_SDMMC0_RK29
- if(on)
- {
- gpio_direction_output(RK29_PIN1_PD0,GPIO_HIGH);//set mmc0-clk to high
- gpio_direction_output(RK29_PIN1_PD1,GPIO_HIGH);//set mmc0-cmd to high.
- gpio_direction_output(RK29_PIN1_PD2,GPIO_HIGH);//set mmc0-data0 to high.
- gpio_direction_output(RK29_PIN1_PD3,GPIO_HIGH);//set mmc0-data1 to high.
- gpio_direction_output(RK29_PIN1_PD4,GPIO_HIGH);//set mmc0-data2 to high.
- gpio_direction_output(RK29_PIN1_PD5,GPIO_HIGH);//set mmc0-data3 to high.
-
- mdelay(30);
- }
- else
- {
- rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_GPIO1_D0);
- gpio_request(RK29_PIN1_PD0, "mmc0-clk");
- gpio_direction_output(RK29_PIN1_PD0,GPIO_LOW);//set mmc0-clk to low.
-
- rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_GPIO1_D1);
- gpio_request(RK29_PIN1_PD1, "mmc0-cmd");
- gpio_direction_output(RK29_PIN1_PD1,GPIO_LOW);//set mmc0-cmd to low.
-
- rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_GPIO1D2);
- gpio_request(RK29_PIN1_PD2, "mmc0-data0");
- gpio_direction_output(RK29_PIN1_PD2,GPIO_LOW);//set mmc0-data0 to low.
-
- rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_GPIO1D3);
- gpio_request(RK29_PIN1_PD3, "mmc0-data1");
- gpio_direction_output(RK29_PIN1_PD3,GPIO_LOW);//set mmc0-data1 to low.
-
- rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_GPIO1D4);
- gpio_request(RK29_PIN1_PD4, "mmc0-data2");
- gpio_direction_output(RK29_PIN1_PD4,GPIO_LOW);//set mmc0-data2 to low.
-
- rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_GPIO1D5);
- gpio_request(RK29_PIN1_PD5, "mmc0-data3");
- gpio_direction_output(RK29_PIN1_PD5,GPIO_LOW);//set mmc0-data3 to low.
-
- mdelay(30);
- }
- #endif
- }
- break;
-
- case 1://mmc1
- {
- #ifdef CONFIG_SDMMC1_RK29
- if(on)
- {
- gpio_direction_output(RK29_PIN1_PC7,GPIO_HIGH);//set mmc1-clk to high
- gpio_direction_output(RK29_PIN1_PC2,GPIO_HIGH);//set mmc1-cmd to high.
- gpio_direction_output(RK29_PIN1_PC3,GPIO_HIGH);//set mmc1-data0 to high.
- gpio_direction_output(RK29_PIN1_PC4,GPIO_HIGH);//set mmc1-data1 to high.
- gpio_direction_output(RK29_PIN1_PC5,GPIO_HIGH);//set mmc1-data2 to high.
- gpio_direction_output(RK29_PIN1_PC6,GPIO_HIGH);//set mmc1-data3 to high.
- mdelay(100);
- }
- else
- {
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_GPIO1C7);
- gpio_request(RK29_PIN1_PC7, "mmc1-clk");
- gpio_direction_output(RK29_PIN1_PC7,GPIO_LOW);//set mmc1-clk to low.
-
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_GPIO1C2);
- gpio_request(RK29_PIN1_PC2, "mmc1-cmd");
- gpio_direction_output(RK29_PIN1_PC2,GPIO_LOW);//set mmc1-cmd to low.
-
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_GPIO1C3);
- gpio_request(RK29_PIN1_PC3, "mmc1-data0");
- gpio_direction_output(RK29_PIN1_PC3,GPIO_LOW);//set mmc1-data0 to low.
-
- mdelay(100);
- }
- #endif
- }
- break;
-
- case 2: //mmc2
- break;
-
- default:
- break;
- }
-}
-
-
-static void rk29_sdmmc_set_iomux_mmc0(unsigned int bus_width)
-{
- switch (bus_width)
- {
-
- case 1://SDMMC_CTYPE_4BIT:
- {
- rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
- rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
- rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
- }
- break;
-
- case 0x10000://SDMMC_CTYPE_8BIT:
- break;
- case 0xFFFF: //gpio_reset
- {
- rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5);
- gpio_request(RK29_PIN5_PD5,"sdmmc-power");
- gpio_direction_output(RK29_PIN5_PD5,GPIO_HIGH); //power-off
-
- rk29_sdmmc_gpio_open(0, 0);
-
- gpio_direction_output(RK29_PIN5_PD5,GPIO_LOW); //power-on
-
- rk29_sdmmc_gpio_open(0, 1);
- }
- break;
-
- default: //case 0://SDMMC_CTYPE_1BIT:
- {
- rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_SDMMC0_CMD);
- rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_SDMMC0_CLKOUT);
- rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_SDMMC0_DATA0);
-
- rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_GPIO1D3);
- gpio_request(RK29_PIN1_PD3, "mmc0-data1");
- gpio_direction_output(RK29_PIN1_PD3,GPIO_HIGH);
-
- rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_GPIO1D4);
- gpio_request(RK29_PIN1_PD4, "mmc0-data2");
- gpio_direction_output(RK29_PIN1_PD4,GPIO_HIGH);
-
- rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_GPIO1D5);
- gpio_request(RK29_PIN1_PD5, "mmc0-data3");
- gpio_direction_output(RK29_PIN1_PD5,GPIO_HIGH);
- }
- break;
- }
-}
-
-static void rk29_sdmmc_set_iomux_mmc1(unsigned int bus_width)
-{
-#if 0
- switch (bus_width)
- {
-
- case 1://SDMMC_CTYPE_4BIT:
- {
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
- rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
- rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
- rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
- }
- break;
-
- case 0x10000://SDMMC_CTYPE_8BIT:
- break;
- case 0xFFFF:
- {
- rk29_sdmmc_gpio_open(1, 0);
- rk29_sdmmc_gpio_open(1, 1);
- }
- break;
-
- default: //case 0://SDMMC_CTYPE_1BIT:
- {
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
-
- rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_GPIO1C4);
- gpio_request(RK29_PIN1_PC4, "mmc1-data1");
- gpio_direction_output(RK29_PIN1_PC4,GPIO_HIGH);
-
- rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_GPIO1C5);
- gpio_request(RK29_PIN1_PC5, "mmc1-data2");
- gpio_direction_output(RK29_PIN1_PC5,GPIO_HIGH);
-
- rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_GPIO1C6);
- gpio_request(RK29_PIN1_PC6, "mmc1-data3");
- gpio_direction_output(RK29_PIN1_PC6,GPIO_HIGH);
-
- }
- break;
- }
-#else
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
- rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
- rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
- rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
-
-#endif
-}
-
-static void rk29_sdmmc_set_iomux_mmc2(unsigned int bus_width)
-{
- ;//
-}
-
-static void rk29_sdmmc_set_iomux(int device_id, unsigned int bus_width)
-{
- switch(device_id)
- {
- case 0:
- #ifdef CONFIG_SDMMC0_RK29
- rk29_sdmmc_set_iomux_mmc0(bus_width);
- #endif
- break;
- case 1:
- #ifdef CONFIG_SDMMC1_RK29
- rk29_sdmmc_set_iomux_mmc1(bus_width);
- #endif
- break;
- case 2:
- rk29_sdmmc_set_iomux_mmc2(bus_width);
- break;
- default:
- break;
- }
-}
-#endif
-#ifdef CONFIG_SDMMC0_RK29
-static int rk29_sdmmc0_cfg_gpio(void)
-{
- rk29_mux_api_set(GPIO1D1_SDMMC0CMD_NAME, GPIO1H_SDMMC0_CMD);
- rk29_mux_api_set(GPIO1D0_SDMMC0CLKOUT_NAME, GPIO1H_SDMMC0_CLKOUT);
- rk29_mux_api_set(GPIO1D2_SDMMC0DATA0_NAME, GPIO1H_SDMMC0_DATA0);
- rk29_mux_api_set(GPIO1D3_SDMMC0DATA1_NAME, GPIO1H_SDMMC0_DATA1);
- rk29_mux_api_set(GPIO1D4_SDMMC0DATA2_NAME, GPIO1H_SDMMC0_DATA2);
- rk29_mux_api_set(GPIO1D5_SDMMC0DATA3_NAME, GPIO1H_SDMMC0_DATA3);
-#ifdef CONFIG_SDMMC_RK29_OLD
- rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_GPIO2A2);
-#else
- rk29_mux_api_set(GPIO2A2_SDMMC0DETECTN_NAME, GPIO2L_SDMMC0_DETECT_N);//Modifyed by xbw.
-#endif
- rk29_mux_api_set(GPIO5D5_SDMMC0PWREN_NAME, GPIO5H_GPIO5D5); ///GPIO5H_SDMMC0_PWR_EN); ///GPIO5H_GPIO5D5);
- gpio_request(RK29_PIN5_PD5,"sdmmc");
- gpio_set_value(RK29_PIN5_PD5,GPIO_HIGH);
- mdelay(100);
- gpio_set_value(RK29_PIN5_PD5,GPIO_LOW);
- return 0;
-}
-
-#define CONFIG_SDMMC0_USE_DMA
-struct rk29_sdmmc_platform_data default_sdmmc0_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
- MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33|
- MMC_VDD_33_34|MMC_VDD_34_35| MMC_VDD_35_36),
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc0_cfg_gpio,
- .dma_name = "sd_mmc",
-#ifdef CONFIG_SDMMC0_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-
-// .detect_irq = RK29_PIN2_PA2, // INVALID_GPIO
- .detect_irq = INVALID_GPIO,
- .enable_sd_wakeup = 0,
-};
-#endif
-#ifdef CONFIG_SDMMC1_RK29
-#define CONFIG_SDMMC1_USE_DMA
-static int rk29_sdmmc1_cfg_gpio(void)
-{
- rk29_mux_api_set(GPIO1C2_SDMMC1CMD_NAME, GPIO1H_SDMMC1_CMD);
- rk29_mux_api_set(GPIO1C7_SDMMC1CLKOUT_NAME, GPIO1H_SDMMC1_CLKOUT);
- rk29_mux_api_set(GPIO1C3_SDMMC1DATA0_NAME, GPIO1H_SDMMC1_DATA0);
- rk29_mux_api_set(GPIO1C4_SDMMC1DATA1_NAME, GPIO1H_SDMMC1_DATA1);
- rk29_mux_api_set(GPIO1C5_SDMMC1DATA2_NAME, GPIO1H_SDMMC1_DATA2);
- rk29_mux_api_set(GPIO1C6_SDMMC1DATA3_NAME, GPIO1H_SDMMC1_DATA3);
- //rk29_mux_api_set(GPIO1C0_UART0CTSN_SDMMC1DETECTN_NAME, GPIO1H_SDMMC1_DETECT_N);
- return 0;
-}
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
-static int rk29sdk_wifi_status(struct device *dev);
-static int rk29sdk_wifi_status_register(void (*callback)(int card_presend, void *dev_id), void *dev_id);
-#endif
-
-#define RK29SDK_WIFI_SDIO_CARD_DETECT_N RK29_PIN1_PD6
-
-struct rk29_sdmmc_platform_data default_sdmmc1_data = {
- .host_ocr_avail = (MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|
- MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32|
- MMC_VDD_32_33|MMC_VDD_33_34),
- .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_SDIO_IRQ|
- MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
- .io_init = rk29_sdmmc1_cfg_gpio,
- .dma_name = "sdio",
-#ifdef CONFIG_SDMMC1_USE_DMA
- .use_dma = 1,
-#else
- .use_dma = 0,
-#endif
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- .status = rk29sdk_wifi_status,
- .register_status_notify = rk29sdk_wifi_status_register,
-#endif
-#if 0
- .detect_irq = RK29SDK_WIFI_SDIO_CARD_DETECT_N,
-#endif
-#if !defined(CONFIG_SDMMC_RK29_OLD)
- .set_iomux = rk29_sdmmc_set_iomux,
-#endif
-};
-#endif
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
-#define RK29SDK_WIFI_BT_GPIO_POWER_N RK29_PIN5_PD6
-#define RK29SDK_WIFI_GPIO_RESET_N RK29_PIN6_PC0
-#define RK29SDK_BT_GPIO_RESET_N RK29_PIN6_PC7
-
-static int rk29sdk_wifi_cd = 0; /* wifi virtual 'card detect' status */
-static void (*wifi_status_cb)(int card_present, void *dev_id);
-static void *wifi_status_cb_devid;
-int rk29sdk_wifi_power_state = 0;
-int rk29sdk_bt_power_state = 0;
-
-static int rk29sdk_wifi_status(struct device *dev)
-{
- return rk29sdk_wifi_cd;
-}
-
-static int rk29sdk_wifi_status_register(void (*callback)(int card_present, void *dev_id), void *dev_id)
-{
- if(wifi_status_cb)
- return -EAGAIN;
- wifi_status_cb = callback;
- wifi_status_cb_devid = dev_id;
- return 0;
-}
-
-static int rk29sdk_wifi_bt_gpio_control_init(void)
-{
- if (gpio_request(RK29SDK_WIFI_BT_GPIO_POWER_N, "wifi_bt_power")) {
- pr_info("%s: request wifi_bt power gpio failed\n", __func__);
- return -1;
- }
-
- if (gpio_request(RK29SDK_WIFI_GPIO_RESET_N, "wifi reset")) {
- pr_info("%s: request wifi reset gpio failed\n", __func__);
- gpio_free(RK29SDK_WIFI_BT_GPIO_POWER_N);
- return -1;
- }
-
- if (gpio_request(RK29SDK_BT_GPIO_RESET_N, "bt reset")) {
- pr_info("%s: request bt reset gpio failed\n", __func__);
- gpio_free(RK29SDK_WIFI_GPIO_RESET_N);
- return -1;
- }
-
- gpio_direction_output(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_LOW);
- gpio_direction_output(RK29SDK_WIFI_GPIO_RESET_N, GPIO_LOW);
- gpio_direction_output(RK29SDK_BT_GPIO_RESET_N, GPIO_LOW);
-
- pr_info("%s: init finished\n",__func__);
-
- return 0;
-}
-
-static int rk29sdk_wifi_power(int on)
-{
- pr_info("%s: %d\n", __func__, on);
- if (on){
- gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_HIGH);
- gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, GPIO_HIGH);
- mdelay(100);
- pr_info("wifi turn on power\n");
- }else{
- if (!rk29sdk_bt_power_state){
- gpio_set_value(RK29SDK_WIFI_BT_GPIO_POWER_N, GPIO_LOW);
- mdelay(100);
- pr_info("wifi shut off power\n");
- }else
- {
- pr_info("wifi shouldn't shut off power, bt is using it!\n");
- }
- gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, GPIO_LOW);
-
- }
-
- rk29sdk_wifi_power_state = on;
- return 0;
-}
-
-static int rk29sdk_wifi_reset_state;
-static int rk29sdk_wifi_reset(int on)
-{
- pr_info("%s: %d\n", __func__, on);
- gpio_set_value(RK29SDK_WIFI_GPIO_RESET_N, on);
- mdelay(100);
- rk29sdk_wifi_reset_state = on;
- return 0;
-}
-
-int rk29sdk_wifi_set_carddetect(int val)
-{
- pr_info("%s:%d\n", __func__, val);
- rk29sdk_wifi_cd = val;
- if (wifi_status_cb){
- wifi_status_cb(val, wifi_status_cb_devid);
- }else {
- pr_warning("%s, nobody to notify\n", __func__);
- }
- return 0;
-}
-EXPORT_SYMBOL(rk29sdk_wifi_set_carddetect);
-
-static struct wifi_mem_prealloc wifi_mem_array[PREALLOC_WLAN_SEC_NUM] = {
- {NULL, (WLAN_SECTION_SIZE_0 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_1 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_2 + PREALLOC_WLAN_SECTION_HEADER)},
- {NULL, (WLAN_SECTION_SIZE_3 + PREALLOC_WLAN_SECTION_HEADER)}
-};
-
-static void *rk29sdk_mem_prealloc(int section, unsigned long size)
-{
- if (section == PREALLOC_WLAN_SEC_NUM)
- return wlan_static_skb;
-
- if ((section < 0) || (section > PREALLOC_WLAN_SEC_NUM))
- return NULL;
-
- if (wifi_mem_array[section].size < size)
- return NULL;
-
- return wifi_mem_array[section].mem_ptr;
-}
-
-int __init rk29sdk_init_wifi_mem(void)
-{
- int i;
- int j;
-
- for (i = 0 ; i < WLAN_SKB_BUF_NUM ; i++) {
- wlan_static_skb[i] = dev_alloc_skb(
- ((i < (WLAN_SKB_BUF_NUM / 2)) ? 4096 : 8192));
-
- if (!wlan_static_skb[i])
- goto err_skb_alloc;
- }
-
- for (i = 0 ; i < PREALLOC_WLAN_SEC_NUM ; i++) {
- wifi_mem_array[i].mem_ptr =
- kmalloc(wifi_mem_array[i].size, GFP_KERNEL);
-
- if (!wifi_mem_array[i].mem_ptr)
- goto err_mem_alloc;
- }
- return 0;
-
- err_mem_alloc:
- pr_err("Failed to mem_alloc for WLAN\n");
- for (j = 0 ; j < i ; j++)
- kfree(wifi_mem_array[j].mem_ptr);
-
- i = WLAN_SKB_BUF_NUM;
-
- err_skb_alloc:
- pr_err("Failed to skb_alloc for WLAN\n");
- for (j = 0 ; j < i ; j++)
- dev_kfree_skb(wlan_static_skb[j]);
-
- return -ENOMEM;
-}
-
-static struct wifi_platform_data rk29sdk_wifi_control = {
- .set_power = rk29sdk_wifi_power,
- .set_reset = rk29sdk_wifi_reset,
- .set_carddetect = rk29sdk_wifi_set_carddetect,
- .mem_prealloc = rk29sdk_mem_prealloc,
-};
-static struct platform_device rk29sdk_wifi_device = {
- .name = "bcm4329_wlan",
- .id = 1,
- .dev = {
- .platform_data = &rk29sdk_wifi_control,
- },
-};
-#endif
-
-
-/* bluetooth rfkill device */
-static struct platform_device rk29sdk_rfkill = {
- .name = "rk29sdk_rfkill",
- .id = -1,
-};
-
-
-#ifdef CONFIG_VIVANTE
-static struct resource resources_gpu[] = {
- [0] = {
- .name = "gpu_irq",
- .start = IRQ_GPU,
- .end = IRQ_GPU,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .name = "gpu_base",
- .start = RK29_GPU_PHYS,
- .end = RK29_GPU_PHYS + RK29_GPU_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .name = "gpu_mem",
- .start = PMEM_GPU_BASE,
- .end = PMEM_GPU_BASE + PMEM_GPU_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-static struct platform_device rk29_device_gpu = {
- .name = "galcore",
- .id = 0,
- .num_resources = ARRAY_SIZE(resources_gpu),
- .resource = resources_gpu,
-};
-#endif
-#ifdef CONFIG_KEYS_RK29
-extern struct rk29_keys_platform_data rk29_keys_pdata;
-static struct platform_device rk29_device_keys = {
- .name = "rk29-keypad",
- .id = -1,
- .dev = {
- .platform_data = &rk29_keys_pdata,
- },
-};
-#endif
-
-#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
-static struct gpio_wave_platform_data gpio_wave_pdata = {
- .gpio = RK29_PIN0_PA0,
- .Htime = 2000,
- .Ltime = 300,
- .Dvalue = GPIO_HIGH,
-};
-static struct platform_device gpio_wave_device = {
- .name = "gpio_wave",
- .id = -1,
- .dev = {
- .platform_data = &gpio_wave_pdata,
- },
-};
-#endif
-#if CONFIG_ANDROID_TIMED_GPIO
-static struct timed_gpio timed_gpios[] = {
- {
- .name = "vibrator",
- .gpio = RK29_PIN1_PB5,
- .max_timeout = 1000,
- .active_low = 0,
- .adjust_time =20, //adjust for diff product
- },
-};
-
-struct timed_gpio_platform_data rk29_vibrator_info = {
- .num_gpios = 1,
- .gpios = timed_gpios,
-};
-
-struct platform_device rk29_device_vibrator ={
- .name = "timed-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rk29_vibrator_info,
- },
-
-};
-#endif
-#ifdef CONFIG_BUTTON_LIGHT
-static int rk29_buttonlight_io_init(void)
-{
- int ret = 0;
-
- return ret;
-}
-
-static int rk29_buttonlight_io_deinit(void)
-{
- int ret = 0;
- return ret;
-}
-struct rk29_button_light_info rk29_button_light_info = {
- .led_on_pin = RK29_PIN0_PA0,
- .led_on_level = 1,
- .io_init = rk29_buttonlight_io_init,
- .io_deinit = rk29_buttonlight_io_deinit,
-
-};
-#endif
-static void __init rk29_board_iomux_init(void)
-{
- int err;
- #ifdef CONFIG_UART1_RK29
- //disable uart1 pull down
- rk29_mux_api_set(GPIO2A5_UART1SOUT_NAME, GPIO2L_GPIO2A5);
- rk29_mux_api_set(GPIO2A4_UART1SIN_NAME, GPIO2L_GPIO2A4);
-
- gpio_request(RK29_PIN2_PA5, NULL);
- gpio_request(RK29_PIN2_PA4, NULL);
-
- gpio_pull_updown(RK29_PIN2_PA5, PullDisable);
- gpio_pull_updown(RK29_PIN2_PA4, PullDisable);
-
- rk29_mux_api_set(GPIO2A5_UART1SOUT_NAME, GPIO2L_UART1_SOUT);
- rk29_mux_api_set(GPIO2A4_UART1SIN_NAME, GPIO2L_UART1_SIN);
-
- gpio_free(RK29_PIN2_PA5);
- gpio_free(RK29_PIN2_PA4);
- #endif
- #if CONFIG_ANDROID_TIMED_GPIO
- rk29_mux_api_set(GPIO1B5_PWM0_NAME, GPIO1L_GPIO1B5);//for timed gpio
- #endif
- #ifdef CONFIG_RK29_PWM_REGULATOR
- rk29_mux_api_set(REGULATOR_PWM_MUX_NAME,REGULATOR_PWM_MUX_MODE);
- #endif
- rk29_mux_api_set(GPIO4C0_RMIICLKOUT_RMIICLKIN_NAME,GPIO4H_GPIO4C0);
-
-/****************************clock change********************************************/
- err = gpio_request(RK29_PIN4_PC0, "clk27M_control");
- if (err) {
- gpio_free(RK29_PIN4_PC0);
- printk("-------request RK29_PIN4_PC0 fail--------\n");
- return -1;
- }
- //phy power down
- gpio_direction_output(RK29_PIN4_PC0, GPIO_LOW);// 27M 32K
- gpio_set_value(RK29_PIN4_PC0, GPIO_LOW);
-
- rk29_mux_api_set(GPIO4C5_RMIICSRDVALID_MIIRXDVALID_NAME,GPIO4H_GPIO4C5);
-
- err = gpio_request(RK29_PIN4_PC5, "clk24M_control");
- if (err) {
- gpio_free(RK29_PIN4_PC5);
- printk("-------request RK29_PIN4_PC5 fail--------\n");
- return -1;
- }
- //phy power down
- gpio_direction_output(RK29_PIN4_PC5, GPIO_LOW);// control 24M
- gpio_set_value(RK29_PIN4_PC5, GPIO_LOW);
-/*******************************************************************/
-
-
-}
-
-// For phone,just a disk only, add by phc,20110816
-#ifdef CONFIG_USB_ANDROID
-struct usb_mass_storage_platform_data phone_mass_storage_pdata = {
- .nluns = 1,
- .vendor = "RockChip",
- .product = "rk29 sdk",
- .release = 0x0100,
-};
-
-//static
-struct platform_device phone_usb_mass_storage_device = {
- .name = "usb_mass_storage",
- .id = -1,
- .dev = {
- .platform_data = &phone_mass_storage_pdata,
- },
-};
-#endif
-
-#ifdef CONFIG_RK29_CHARGE_EARLYSUSPEND
-
-struct platform_device charge_lowerpower_device = {
- .name = "charge_lowerpower",
- .id = -1,
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
-
-#ifdef CONFIG_RK29_WATCHDOG
- &rk29_device_wdt,
-#endif
-
-#ifdef CONFIG_UART1_RK29
- &rk29_device_uart1,
-#endif
-#ifdef CONFIG_UART0_RK29
- &rk29_device_uart0,
-#endif
-#ifdef CONFIG_UART2_RK29
- &rk29_device_uart2,
-#endif
-#ifdef CONFIG_UART3_RK29
- &rk29_device_uart3,
-#endif
-
-#ifdef CONFIG_RK29_PWM_REGULATOR
- &rk29_device_pwm_regulator,
-#endif
-#ifdef CONFIG_SPIM0_RK29
- &rk29xx_device_spi0m,
-#endif
-#ifdef CONFIG_SPIM1_RK29
- &rk29xx_device_spi1m,
-#endif
-#ifdef CONFIG_ADC_RK29
- &rk29_device_adc,
-#endif
-#ifdef CONFIG_I2C0_RK29
- &rk29_device_i2c0,
-#endif
-#ifdef CONFIG_I2C1_RK29
- &rk29_device_i2c1,
-#endif
-#ifdef CONFIG_I2C2_RK29
- &rk29_device_i2c2,
-#endif
-#ifdef CONFIG_I2C3_RK29
- &rk29_device_i2c3,
-#endif
-
-#ifdef CONFIG_SND_RK29_SOC_I2S_2CH
- &rk29_device_iis_2ch,
-#endif
-#ifdef CONFIG_SND_RK29_SOC_I2S_8CH
- &rk29_device_iis_8ch,
-#endif
-
-#ifdef CONFIG_KEYS_RK29
- &rk29_device_keys,
-#endif
-#ifdef CONFIG_USE_GPIO_GENERATE_WAVE
- &gpio_wave_device,
-#endif
-#ifdef CONFIG_SDMMC0_RK29
- &rk29_device_sdmmc0,
-#endif
-#ifdef CONFIG_SDMMC1_RK29
- &rk29_device_sdmmc1,
-#endif
-
-#ifdef CONFIG_MTD_NAND_RK29XX
- &rk29xx_device_nand,
-#endif
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- &rk29sdk_wifi_device,
-#endif
-
-#ifdef CONFIG_BT
- &rk29sdk_rfkill,
-#endif
-
-#if defined(CONFIG_TDSC8800)
- &rk29_device_tdsc8800,
-#endif
-
-#ifdef CONFIG_MTD_NAND_RK29
- &rk29_device_nand,
-#endif
-
-#ifdef CONFIG_FB_RK29
- &rk29_device_fb,
- &rk29_device_dma_cpy,
-#endif
-#ifdef CONFIG_BACKLIGHT_RK29_BL
- &rk29_device_backlight,
-#endif
-#ifdef CONFIG_BUTTON_LIGHT
- &rk29_device_buttonlight,
-#endif
-#ifdef CONFIG_RK29_VMAC
- &rk29_device_vmac,
-#endif
-#ifdef CONFIG_VIVANTE
- &rk29_device_gpu,
-#endif
-#ifdef CONFIG_VIDEO_RK29
- &rk29_device_camera, /* ddl@rock-chips.com : camera support */
- #if (CONFIG_SENSOR_IIC_ADDR_0 != 0x00)
- &rk29_soc_camera_pdrv_0,
- #endif
- &rk29_soc_camera_pdrv_1,
- &android_pmem_cam_device,
-#endif
- &android_pmem_device,
- &rk29_vpu_mem_device,
-#ifdef CONFIG_USB20_OTG
- &rk29_device_usb20_otg,
-#endif
-#ifdef CONFIG_USB20_HOST
- &rk29_device_usb20_host,
-#endif
-#ifdef CONFIG_USB11_HOST
- &rk29_device_usb11_host,
-#endif
-#ifdef CONFIG_USB_ANDROID
- &android_usb_device,
- &phone_usb_mass_storage_device,
-#endif
-#ifdef CONFIG_RK29_IPP
- &rk29_device_ipp,
-#endif
-#ifdef CONFIG_VIDEO_RK29XX_VOUT
- &rk29_v4l2_output_devce,
-#endif
-#ifdef CONFIG_RK_HEADSET_DET
- &rk_device_headset,
-#endif
-#ifdef CONFIG_RK29_GPS
- &rk29_device_gps,
-#endif
-#ifdef CONFIG_RK29_CHARGE_EARLYSUSPEND
- &charge_lowerpower_device,
-#endif
-#ifdef CONFIG_ANDROID_TIMED_GPIO
- &rk29_device_vibrator,
-#endif
-};
-
-#ifdef CONFIG_RK29_VMAC
-/*****************************************************************************************
- * vmac devices
- * author: lyx@rock-chips.com
- *****************************************************************************************/
-static int rk29_vmac_register_set(void)
-{
- //config rk29 vmac as rmii, 100MHz
- u32 value= readl(RK29_GRF_BASE + 0xbc);
- value = (value & 0xfff7ff) | (0x400);
- writel(value, RK29_GRF_BASE + 0xbc);
- return 0;
-}
-
-static int rk29_rmii_io_init(void)
-{
- int err;
-
- //phy power gpio
- err = gpio_request(RK29_PIN6_PB0, "phy_power_en");
- if (err) {
- gpio_free(RK29_PIN6_PB0);
- printk("-------request RK29_PIN6_PB0 fail--------\n");
- return -1;
- }
- //phy power down
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
-
- return 0;
-}
-
-static int rk29_rmii_io_deinit(void)
-{
- //phy power down
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
- //free
- gpio_free(RK29_PIN6_PB0);
- return 0;
-}
-
-static int rk29_rmii_power_control(int enable)
-{
- if (enable) {
- //enable phy power
- gpio_direction_output(RK29_PIN6_PB0, GPIO_HIGH);
- gpio_set_value(RK29_PIN6_PB0, GPIO_HIGH);
- }
- else {
- gpio_direction_output(RK29_PIN6_PB0, GPIO_LOW);
- gpio_set_value(RK29_PIN6_PB0, GPIO_LOW);
- }
- return 0;
-}
-
-struct rk29_vmac_platform_data rk29_vmac_pdata = {
- .vmac_register_set = rk29_vmac_register_set,
- .rmii_io_init = rk29_rmii_io_init,
- .rmii_io_deinit = rk29_rmii_io_deinit,
- .rmii_power_control = rk29_rmii_power_control,
-};
-#endif
-
-/*****************************************************************************************
- * spi devices
- * author: cmc@rock-chips.com
- *****************************************************************************************/
-#define SPI_CHIPSELECT_NUM 2
-static struct spi_cs_gpio rk29xx_spi0_cs_gpios[SPI_CHIPSELECT_NUM] = {
- {
- .name = "spi0 cs0",
- .cs_gpio = RK29_PIN2_PC1,
- .cs_iomux_name = GPIO2C1_SPI0CSN0_NAME,
- .cs_iomux_mode = GPIO2H_SPI0_CSN0,
- },
- {
- .name = "spi0 cs1",
- .cs_gpio = RK29_PIN1_PA4,
- .cs_iomux_name = GPIO1A4_EMMCWRITEPRT_SPI0CS1_NAME,//if no iomux,set it NULL
- .cs_iomux_mode = GPIO1L_SPI0_CSN1,
- }
-};
-
-static struct spi_cs_gpio rk29xx_spi1_cs_gpios[SPI_CHIPSELECT_NUM] = {
- {
- .name = "spi1 cs0",
- .cs_gpio = RK29_PIN2_PC5,
- .cs_iomux_name = GPIO2C5_SPI1CSN0_NAME,
- .cs_iomux_mode = GPIO2H_SPI1_CSN0,
- },
- {
- .name = "spi1 cs1",
- .cs_gpio = RK29_PIN1_PA3,
- .cs_iomux_name = GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,//if no iomux,set it NULL
- .cs_iomux_mode = GPIO1L_SPI1_CSN1,
- }
-};
-
-static int spi_io_init(struct spi_cs_gpio *cs_gpios, int cs_num)
-{
-#if 1
- int i;
- if (cs_gpios) {
- for (i=0; i<cs_num; i++) {
- rk29_mux_api_set(cs_gpios[i].cs_iomux_name, cs_gpios[i].cs_iomux_mode);
- }
- }
-#endif
- return 0;
-}
-
-static int spi_io_deinit(struct spi_cs_gpio *cs_gpios, int cs_num)
-{
- return 0;
-}
-
-static int spi_io_fix_leakage_bug(void)
-{
-#if 0
- gpio_direction_output(RK29_PIN2_PC1, GPIO_LOW);
-#endif
- return 0;
-}
-
-static int spi_io_resume_leakage_bug(void)
-{
-#if 0
- gpio_direction_output(RK29_PIN2_PC1, GPIO_HIGH);
-#endif
- return 0;
-}
-
-struct rk29xx_spi_platform_data rk29xx_spi0_platdata = {
- .num_chipselect = SPI_CHIPSELECT_NUM,
- .chipselect_gpios = rk29xx_spi0_cs_gpios,
- .io_init = spi_io_init,
- .io_deinit = spi_io_deinit,
- .io_fix_leakage_bug = spi_io_fix_leakage_bug,
- .io_resume_leakage_bug = spi_io_resume_leakage_bug,
-};
-
-struct rk29xx_spi_platform_data rk29xx_spi1_platdata = {
- .num_chipselect = SPI_CHIPSELECT_NUM,
- .chipselect_gpios = rk29xx_spi1_cs_gpios,
- .io_init = spi_io_init,
- .io_deinit = spi_io_deinit,
- .io_fix_leakage_bug = spi_io_fix_leakage_bug,
- .io_resume_leakage_bug = spi_io_resume_leakage_bug,
-};
-
-/*****************************************************************************************
- * xpt2046 touch panel
- * author: hhb@rock-chips.com
- *****************************************************************************************/
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_NORMAL_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_TSLIB_SPI)
-#define XPT2046_GPIO_INT RK29_PIN4_PD5 //中断???#define DEBOUNCE_REPTIME 3
-
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .touch_virtualkey_length = 60,
- .penirq_recheck_delay_usecs = 1,
-#if defined(CONFIG_TOUCHSCREEN_480X800)
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .touch_ad_top = 3940,
- .touch_ad_bottom = 310,
- .touch_ad_left = 3772,
- .touch_ad_right = 340,
-#elif defined(CONFIG_TOUCHSCREEN_800X480)
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
- .touch_ad_top = 2447,
- .touch_ad_bottom = 207,
- .touch_ad_left = 5938,
- .touch_ad_right = 153,
-#elif defined(CONFIG_TOUCHSCREEN_320X480)
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
- .touch_ad_top = 3166,
- .touch_ad_bottom = 256,
- .touch_ad_left = 3658,
- .touch_ad_right = 380,
-#endif
-};
-#elif defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
-static struct xpt2046_platform_data xpt2046_info = {
- .model = 2046,
- .keep_vref_on = 1,
- .swap_xy = 0,
- .debounce_max = 7,
- .debounce_rep = DEBOUNCE_REPTIME,
- .debounce_tol = 20,
- .gpio_pendown = XPT2046_GPIO_INT,
- .pendown_iomux_name = GPIO4D5_CPUTRACECTL_NAME,
- .pendown_iomux_mode = GPIO4H_GPIO4D5,
- .touch_virtualkey_length = 60,
- .penirq_recheck_delay_usecs = 1,
-
-#if defined(CONFIG_TOUCHSCREEN_480X800)
- .x_min = 0,
- .x_max = 480,
- .y_min = 0,
- .y_max = 800,
- .screen_x = { 70, 410, 70, 410, 240},
- .screen_y = { 50, 50, 740, 740, 400},
- .uncali_x_default = { 3267, 831, 3139, 715, 1845 },
- .uncali_y_default = { 3638, 3664, 564, 591, 2087 },
-#elif defined(CONFIG_TOUCHSCREEN_800X480)
- .x_min = 0,
- .x_max = 800,
- .y_min = 0,
- .y_max = 480,
- .screen_x[5] = { 50, 750, 50, 750, 400};
- .screen_y[5] = { 40, 40, 440, 440, 240};
- .uncali_x_default[5] = { 438, 565, 3507, 3631, 2105 };
- .uncali_y_default[5] = { 3756, 489, 3792, 534, 2159 };
-#elif defined(CONFIG_TOUCHSCREEN_320X480)
- .x_min = 0,
- .x_max = 320,
- .y_min = 0,
- .y_max = 480,
- .screen_x[5] = { 50, 270, 50, 270, 160};
- .screen_y[5] = { 40, 40, 440, 440, 240};
- .uncali_x_default[5] = { 812, 3341, 851, 3371, 2183 };
- .uncali_y_default[5] = { 442, 435, 3193, 3195, 2004 };
-#endif
-};
-#endif
-
-#if defined(CONFIG_RK29_SC8800)
-static struct plat_sc8800 sc8800_plat_data = {
- .slav_rts_pin = RK29_PIN1_PC1,
- .slav_rdy_pin = RK29_PIN0_PA3,
- .master_rts_pin = RK29_PIN1_PC0,
- .master_rdy_pin = RK29_PIN0_PA2,
- //.poll_time = 100,
-};
-#endif
-/*
-static struct rk29xx_spi_chip cmb_spi_chip = {
- .transfer_mode = rk29xx_SPI_FULL_DUPLEX,
-};
-*/
-/*****************************************************************************************
- * CMMB IO CONFIG
- * author: lby@rock-chips.com
- *****************************************************************************************/
-#if defined(CONFIG_SMS_SPI_ROCKCHIP)
-#define CMMB_1186_SPIIRQ RK29_PIN6_PD1
-void cmmb_io_init_mux(void)
-{
-// rk29_mux_api_set(GPIO1A4_EMMCWRITEPRT_SPI0CS1_NAME, GPIO1L_GPIO1A4);
-
-}
-void cmmb_io_set_for_pm(void)
-{
- printk("entering cmmb_io_set_for_pm\n");
- gpio_request(RK29_PIN6_PD2, NULL);//cmmb reset pin
- gpio_direction_output(RK29_PIN6_PD2,0);
- rk29_mux_api_set(GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,GPIO1L_GPIO1A3);
- gpio_request(RK29_PIN1_PA3, NULL);//cmmb cs pin
- gpio_direction_input(RK29_PIN1_PA3);
- gpio_pull_updown(RK29_PIN1_PA3, 0);
-}
-
-void cmmb_power_on_by_wm831x(void)
-{
- struct regulator *ldo;
-
- printk("entering cmmb_power_on_by_wm831x\n");
-
- rk29_mux_api_set(GPIO1A3_EMMCDETECTN_SPI1CS1_NAME,GPIO1L_SPI0_CSN1);
- gpio_request(RK29_PIN6_PD2, NULL);
- gpio_direction_output(RK29_PIN6_PD2,0);
- mdelay(200);
-
- ldo = regulator_get(NULL, "ldo8"); //cmmb
- regulator_set_voltage(ldo,1200000,1200000);
- regulator_set_suspend_voltage(ldo,1200000);
- regulator_enable(ldo);
- printk("%s set ldo8=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo9"); //cmmb
- regulator_set_voltage(ldo,3000000,3000000);
- regulator_set_suspend_voltage(ldo,3000000);
- regulator_enable(ldo);
- printk("%s set ldo9=%dmV end\n", __FUNCTION__, regulator_get_voltage(ldo));
- regulator_put(ldo);
-
- mdelay(200);
- gpio_direction_output(RK29_PIN6_PD2,1);
-}
-
-void cmmb_power_down_by_wm831x(void)
-{
- struct regulator* ldo;
-
- printk("entering cmmb_power_down_by_wm831x\n");
-
- ldo = regulator_get(NULL, "ldo8");
- regulator_set_voltage(ldo,0,0);
- regulator_disable(ldo);
- regulator_put(ldo);
-
- ldo = regulator_get(NULL, "ldo9");
- regulator_set_voltage(ldo,0,0);
- regulator_disable(ldo);
- regulator_put(ldo);
-}
-
-static struct cmmb_io_def_s cmmb_io = {
- .cmmb_pw_en = INVALID_GPIO,
- .cmmb_pw_dwn = INVALID_GPIO,
- .cmmb_pw_rst = RK29_PIN6_PD2,
- .cmmb_irq = CMMB_1186_SPIIRQ,
- .io_init_mux = cmmb_io_init_mux,
- .cmmb_io_pm = cmmb_io_set_for_pm,
- .cmmb_power_on = cmmb_power_on_by_wm831x,
- .cmmb_power_down = cmmb_power_down_by_wm831x
-};
-#endif
-static struct spi_board_info board_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
- {
- .modalias = "xpt2046_ts",
- .chip_select = 0,// 2,
- .max_speed_hz = 125 * 1000 * 26,/* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .irq = XPT2046_GPIO_INT,
- .platform_data = &xpt2046_info,
- },
-#endif
-
-#if defined(CONFIG_MFD_WM831X_SPI)
- {
- .modalias = "wm8310",
- .chip_select = 1,
- .max_speed_hz = 1*1000*1000,
- .bus_num = 1,
- .irq = RK29_PIN4_PD0,
- .platform_data = &wm831x_platdata,
- },
-#endif
-#if defined(CONFIG_RK29_SC8800)
- {
- .modalias = "sc8800",
- .bus_num = 0,
- .platform_data = &sc8800_plat_data,
- .max_speed_hz = 12*1000*1000,
- .chip_select = 0,
- },
-#endif
-
-#if defined(CONFIG_SMS_SPI_ROCKCHIP)
- {
- .modalias = "siano1186",
- .chip_select = 1,
- .max_speed_hz = 12*1000*1000,
- .bus_num = 1,
- .irq =CMMB_1186_SPIIRQ,
- //.controller_data = &cmb_spi_chip,
- .platform_data = &cmmb_io,
- },
-#endif
-};
-
-
-/**********************************************************************************************
- *
- * The virtual keys for android "back", "home", "menu", "search", these four keys are touch key
- * on the touch screen panel. (added by hhb@rock-chips.com 2011.03.31)
- *
- ***********************************************************************************************/
-static ssize_t rk29xx_virtual_keys_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
-{
-#if (defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) && defined(CONFIG_TOUCHSCREEN_480X800)) \
- || defined(CONFIG_TOUCHSCREEN_HX8520_IIC) || defined(CONFIG_TOUCHSCREEN_GT801_IIC)\
- || defined(CONFIG_TOUCHSCREEN_PIXCIR)
- /* center: x: home: 50, menu: 184, back: 315, search 435, y: 830*/
- /* centerx;centery;width;height; */
- return sprintf(buf,
- __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":305:845:50:60"//":305:845:50:60" //":50:830:98:50" //":210:796:98:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":165:845:50:60"//":165:845:50:60" // ":184:830:120:50" // ":435:796:120:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":25:845:120:60"//":25:845:50:60" //":315:830:100:50" //":320:796:100:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":445:845:50:60"//":445:845:50:60" //":50:815:98:50" // //":85:796:88:50"
- "\n");
-#endif
-#if defined(CONFIG_TOUCHSCREEN_FT5X0X) || defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
- return sprintf(buf,
- __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":305:875:60:60"//":305:845:50:60" //":50:830:98:50" //":210:796:98:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":165:875:60:60"//":165:845:50:60" // ":184:830:120:50" // ":435:796:120:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":30:875:60:60"//":25:845:50:60" //":315:830:100:50" //":320:796:100:50"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_SEARCH) ":445:875:60:60"//":445:845:50:60" //":50:815:98:50" // //":85:796:88:50"
- "\n");
-#endif
- return 0;
-}
-
-static struct kobj_attribute rk29xx_virtual_keys_attr = {
- .attr = {
-#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI)
- .name = "virtualkeys.xpt2046-touchscreen",
-#elif defined(CONFIG_TOUCHSCREEN_HX8520_IIC)
- .name = "virtualkeys.hx8520-touchscreen",
-#elif defined(CONFIG_TOUCHSCREEN_GT801_IIC)
- .name = "virtualkeys.gt801-touchscreen",
-#elif defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
- .name = "virtualkeys.ili2102-touchscreen",
-#elif defined(CONFIG_TOUCHSCREEN_FT5X0X)
- .name = "virtualkeys.ft5x0x_ts-touchscreen",
-#elif defined(CONFIG_TOUCHSCREEN_PIXCIR)
- .name = "virtualkeys.pixcir_ts-touchscreen",
-#else
- .name = "virtualkeys",
-#endif
- .mode = S_IRUGO,
- },
- .show = &rk29xx_virtual_keys_show,
-};
-
-static struct attribute *rk29xx_properties_attrs[] = {
- &rk29xx_virtual_keys_attr.attr,
- NULL
-};
-
-static struct attribute_group rk29xx_properties_attr_group = {
- .attrs = rk29xx_properties_attrs,
-};
-static int rk29xx_virtual_keys_init(void)
-{
- int ret;
- struct kobject *properties_kobj;
- printk("rk29xx_virtual_keys_init \n");
- properties_kobj = kobject_create_and_add("board_properties", NULL);
- if (properties_kobj)
- ret = sysfs_create_group(properties_kobj,
- &rk29xx_properties_attr_group);
- if (!properties_kobj || ret)
- {
- pr_err("failed to create board_properties\n");
- }
- return ret;
-}
-
-
-static void __init rk29_gic_init_irq(void)
-{
-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 38))
- gic_init(0, 32, (void __iomem *)RK29_GICPERI_BASE, (void __iomem *)RK29_GICCPU_BASE);
-#else
- gic_dist_init(0, (void __iomem *)RK29_GICPERI_BASE, 32);
- gic_cpu_init(0, (void __iomem *)RK29_GICCPU_BASE);
-#endif
-}
-
-static void __init machine_rk29_init_irq(void)
-{
- rk29_gic_init_irq();
- rk29_gpio_init();
-}
-
-
-
-static void rk29_pm_power_restart(void)
-{
- printk("%s,line=%d\n",__FUNCTION__,__LINE__);
- mdelay(2);
-#if defined(CONFIG_MFD_WM831X)
- wm831x_device_restart(gWm831x);
-#endif
-
-}
-
-static void rk29_pm_power_off(void)
-{
- printk(KERN_ERR "rk29_pm_power_off start...\n");
- gpio_direction_output(POWER_ON_PIN, GPIO_LOW);
- gpio_direction_output(BP_VOL_PIN,GPIO_LOW);
-#if defined(CONFIG_MFD_WM831X)
- if(wm831x_read_usb(gWm831x))
- rk29_pm_power_restart(); //if charging then restart
- else
- wm831x_device_shutdown(gWm831x);//else shutdown
-#endif
- while (1);
-}
-
-static struct cpufreq_frequency_table freq_table[] =
-{
- { .index = 1100000, .frequency = 408000 },
- { .index = 1150000, .frequency = 600000 },
- { .index = 1200000, .frequency = 816000 },
-// { .index = 1300000, .frequency = 1008000 },
- { .frequency = CPUFREQ_TABLE_END },
-};
-
-static void __init machine_rk29_board_init(void)
-{
- rk29_board_iomux_init();
-
- gpio_request(POWER_ON_PIN,"poweronpin");
- gpio_set_value(POWER_ON_PIN, GPIO_HIGH);
- gpio_direction_output(POWER_ON_PIN, GPIO_HIGH);
- gpio_request(RK29_PIN0_PA0,NULL);
- gpio_direction_output(RK29_PIN0_PA0, 0);
-
- pm_power_off = rk29_pm_power_off;
- //arm_pm_restart = rk29_pm_power_restart;
-
- board_update_cpufreq_table(freq_table);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-#ifdef CONFIG_I2C0_RK29
- i2c_register_board_info(default_i2c0_data.bus_num, board_i2c0_devices,
- ARRAY_SIZE(board_i2c0_devices));
-#endif
-#ifdef CONFIG_I2C1_RK29
- i2c_register_board_info(default_i2c1_data.bus_num, board_i2c1_devices,
- ARRAY_SIZE(board_i2c1_devices));
-#endif
-#ifdef CONFIG_I2C2_RK29
- i2c_register_board_info(default_i2c2_data.bus_num, board_i2c2_devices,
- ARRAY_SIZE(board_i2c2_devices));
-#endif
-#ifdef CONFIG_I2C3_RK29
- i2c_register_board_info(default_i2c3_data.bus_num, board_i2c3_devices,
- ARRAY_SIZE(board_i2c3_devices));
-#endif
-
- spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
-
-#ifdef CONFIG_WIFI_CONTROL_FUNC
- rk29sdk_wifi_bt_gpio_control_init();
- rk29sdk_init_wifi_mem();
-#endif
-
- #if (defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) && defined(CONFIG_TOUCHSCREEN_480X800)) \
- || defined(CONFIG_TOUCHSCREEN_HX8520_IIC) || defined(CONFIG_TOUCHSCREEN_GT801_IIC)\
- || defined(CONFIG_TOUCHSCREEN_PIXCIR) || defined(CONFIG_TOUCHSCREEN_FT5X0X)\
- || defined(CONFIG_TOUCHSCREEN_ILI2102_IIC)
- rk29xx_virtual_keys_init();
- #endif
-
-}
-
-static void __init machine_rk29_fixup(struct machine_desc *desc, struct tag *tags,
- char **cmdline, struct meminfo *mi)
-{
- mi->nr_banks = 1;
- mi->bank[0].start = RK29_SDRAM_PHYS;
- //mi->bank[0].node = PHYS_TO_NID(RK29_SDRAM_PHYS);
- mi->bank[0].size = LINUX_SIZE;
-#if SDRAM_SIZE > SZ_512M
- mi->nr_banks = 2;
- mi->bank[1].start = RK29_SDRAM_PHYS + SZ_512M;
- mi->bank[1].size = SDRAM_SIZE - SZ_512M;
-#endif
-}
-
-static void __init machine_rk29_mapio(void)
-{
- rk29_map_common_io();
- rk29_setup_early_printk();
- rk29_sram_init();
- rk29_clock_init2(periph_pll_96mhz, codec_pll_300mhz, false);
- rk29_iomux_init();
- ddr_init(DDR_TYPE, DDR_FREQ);
-}
-
-MACHINE_START(RK29, "RK29board")
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 37))
- /* UART for LL DEBUG */
- .phys_io = RK29_UART1_PHYS & 0xfff00000,
- .io_pg_offst = ((RK29_UART1_BASE) >> 18) & 0xfffc,
-#endif
- .boot_params = RK29_SDRAM_PHYS + 0x88000,
- .fixup = machine_rk29_fixup,
- .map_io = machine_rk29_mapio,
- .init_irq = machine_rk29_init_irq,
- .init_machine = machine_rk29_board_init,
- .timer = &rk29_timer,
-MACHINE_END
}
};
#endif
-
-#ifdef CONFIG_BUTTON_LIGHT
-struct platform_device rk29_device_buttonlight = {
- .name = "rk29_button_light",
- .id = -1,
- .dev = {
- .platform_data = &rk29_button_light_info,
- }
-};
-#endif
#ifdef CONFIG_SDMMC0_RK29
#ifndef CONFIG_EMMC_RK29
static struct resource resources_sdmmc0[] = {
extern struct platform_device rk29_device_adc;
extern struct platform_device rk29_device_vmac;
extern struct rk29_bl_info rk29_bl_info;
-extern struct rk29_button_light_info rk29_button_light_info;
extern struct platform_device rk29_device_backlight;
-extern struct platform_device rk29_device_buttonlight;
extern struct platform_device rk29_device_usb20_otg;
extern struct platform_device rk29_device_usb20_host;
extern struct platform_device rk29_device_usb11_host;
+++ /dev/null
-#include <mach/rk29_iomap.h>
-#include <mach/board.h>
-#include <mach/sram.h>
-#include <mach/iomux.h>
-#include <mach/cru.h>
-#include <asm/io.h>
-#include <mach/gpio.h>
-
-#if defined(CONFIG_RK29_I2C_INSRAM)
-
-#define I2C_SPEED 200
-
-#if defined(CONFIG_MACH_RK29_TD8801_V2)
-/******************need set when you use i2c*************************/
-#define I2C_SADDR (0x34) /* slave address ,wm8310 addr is 0x34*/
-#define SRAM_I2C_CH 1 //CH==0, i2c0,CH==1, i2c1,CH==2, i2c2,CH==3, i2c3
-#define SRAM_I2C_ADDRBASE RK29_I2C1_BASE //RK29_I2C0_BASE\RK29_I2C2_BASE\RK29_I2C3_BASE
-#define I2C_SLAVE_ADDR_LEN 1 // 2:slav addr is 10bit ,1:slav addr is 7bit
-#define I2C_SLAVE_REG_LEN 2 // 2:slav reg addr is 16 bit ,1:is 8 bit
-#define SRAM_I2C_DATA_BYTE 2 //i2c transmission data is 1bit(8wei) or 2bit(16wei)
-#define GRF_GPIO_IOMUX GRF_GPIO1L_IOMUX
-/*ch=0:GRF_GPIO2L_IOMUX,ch=1:GRF_GPIO1L_IOMUX,ch=2:GRF_GPIO5H_IOMUX,ch=3:GRF_GPIO2L_IOMUX*/
-#define I2C_GRF_GPIO_IOMUX (~(0x03<<14))&(~(0x03<<12))|(0x01<<14)|(0x01<<12)
-/*CH=0:(~(0x03<<30))&(~(0x03<<28))|(0x01<<30)|(0x01<<28),CH=1:(~(0x03<<14))&(~(0x03<<12))|(0x01<<14)|(0x01<<12),
-CH=2:(~(0x03<<24))&(~(0x03<<22))|(0x01<<24)|(0x01<<22),CH=3:(~(0x03<<26))&(~(0x03<<24))|(0x02<<26)|(0x02<<24)*/
-/***************************************/
-#if defined(SRAM_I2C_CH)
-#define CRU_CLKGATE_ADDR CRU_CLKGATE2_CON
-#define CRU_CLKGATE_BIT SRAM_I2C_CH+11
-#else
-#define CRU_CLKGATE_ADDR CRU_CLKGATE0_CON
-#define CRU_CLKGATE_BIT 26
-#endif
-//#define SRAM_I2C_ADDRBASE (RK29_I2C##SRAM_I2C_CH##_BASE )
-
-#define I2C_SLAVE_TYPE (((I2C_SLAVE_ADDR_LEN-1)<<4)|((I2C_SLAVE_REG_LEN-1)))
-
-#define uint8 unsigned char
-#define uint16 unsigned short
-#define uint32 unsigned int
-uint32 __sramdata data[5];
-
-#define CRU_CLKGATE0_CON 0x54
-#define CRU_CLKGATE2_CON 0x64
-#define CRU_CLKGATE1_CON 0x60
-
-#define CRU_CLKSEL0_CON 0x14
-#define GRF_GPIO5H_IOMUX 0x74
-#define GRF_GPIO2L_IOMUX 0x58
-#define GRF_GPIO1L_IOMUX 0x50
-
-#define I2C_ARBITR_LOSE_STATUS (1<<7) // Arbitration lose STATUS
-#define I2C_RECE_INT_MACKP (1<<1) // Master ACK period interrupt status bit
-#define I2C_RECE_INT_MACK (1) // Master receives ACK interrupt status bit
-
-#define I2C_MTXR (0x0000) /* master transmit */
-#define I2C_MRXR (0x0004) /* master receive */
-
-#define I2C_IER (0x0014) /* interrupt enable control */
-#define I2C_ISR (0x0018) /* interrupt status, write 0 to clear */
-#define I2C_LCMR (0x001c) /* stop/start/resume command, write 1 to set */
-#define I2C_LSR (0x0020) /* i2c core status */
-#define I2C_CONR (0x0024) /* i2c config */
-#define I2C_OPR (0x0028) /* i2c core config */
-#define I2C_MASTER_TRAN_MODE (1<<3)
-#define I2C_MASTER_PORT_ENABLE (1<<2)
-#define I2C_CON_NACK (1 << 4)
-#define I2C_CON_ACK (0)
-#define I2C_LCMR_RESUME (1<<2)
-#define I2C_LCMR_STOP (1<<1)
-#define I2C_LCMR_START (1<<0)
-#define SRAM_I2C_WRITE (0x0ul)
-#define SRAM_I2C_READ (0x1ul)
-#define I2C_MASTER_RECE_MODE (0)
-#define I2C_CORE_ENABLE (1<<6)
-#define I2C_CORE_DISABLE (0)
-
-#define SRAM_I2C_CLK_ENABLE() writel((~0x000000085), RK29_CRU_BASE + CRU_CLKGATE1_CON);
-#define SRAM_I2C_CLK_DISABLE() writel(~0, RK29_CRU_BASE + CRU_CLKGATE1_CON);
-#define sram_i2c_set_mode() do{ writel(0x0,SRAM_I2C_ADDRBASE + I2C_ISR);writel(0x0, SRAM_I2C_ADDRBASE + I2C_IER);writel((readl(SRAM_I2C_ADDRBASE + I2C_CONR)&(~(0x1ul<<4)))|I2C_MASTER_TRAN_MODE|I2C_MASTER_PORT_ENABLE, SRAM_I2C_ADDRBASE + I2C_CONR);}while(0)
-
-void __sramfunc sram_i2c_start(void);
-void __sramfunc sram_i2c_stop(void);
-uint8 __sramfunc sram_i2c_wait_event(void);
-uint8 __sramfunc sram_i2c_send_data(uint8 buf, uint8 startbit);
-uint8 __sramfunc sram_i2c_read_data(uint8 *buf);
-uint8 __sramfunc sram_i2c_slaveAdr(uint16 I2CSlaveAddr, uint8 addressBit, uint8 read_or_write);
-
-void __sramfunc sram_printch(char byte);
-void __sramfunc print_Hex(unsigned int hex);
-
-
-void i2c_interface_ctr_reg_pread()
-{
- readl(SRAM_I2C_ADDRBASE);
- readl(RK29_CRU_BASE);
- readl(RK29_GRF_BASE);
- readl(RK29_GPIO0_BASE);
- readl(RK29_GPIO1_BASE);
- readl(RK29_GPIO2_BASE);
- readl(RK29_GPIO3_BASE);
- readl(RK29_GPIO4_BASE);
- readl(RK29_GPIO5_BASE);
- readl(RK29_GPIO6_BASE);
-}
-
-void __sramfunc sram_i2c_delay(int delay_time)
-{
- int n = 100 * delay_time;
- while(n--)
- {
- __asm__ __volatile__("");
- }
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_init
-Desc : initialize the necessary registers
-Params : channel-determine which I2C bus we used
-Return : none
-------------------------------------------------------------------------------------------------------*/
-void __sramfunc sram_i2c_init()
-{
-
- //enable cru_clkgate1 clock
- data[0] = readl(RK29_CRU_BASE + CRU_CLKGATE1_CON);
- writel(data[0]&(~0x00000085), RK29_CRU_BASE + CRU_CLKGATE1_CON);
- //set the pclk
- data[1] = readl(RK29_CRU_BASE + CRU_CLKSEL0_CON);
- writel(data[1]&(~(0x07 << 5))&(~(0x03 << 10)) | (0x03 << 10), RK29_CRU_BASE + CRU_CLKSEL0_CON);
- data[2] = readl(RK29_CRU_BASE + CRU_CLKGATE_ADDR);
- writel(data[2]&(~(0x01 << CRU_CLKGATE_BIT)), RK29_CRU_BASE + CRU_CLKGATE_ADDR);
- data[3] = readl(RK29_GRF_BASE + GRF_GPIO_IOMUX);
- writel(data[3]&I2C_GRF_GPIO_IOMUX, RK29_GRF_BASE + GRF_GPIO_IOMUX);
-
-
- //reset I2c-reg base
- data[4] = readl(SRAM_I2C_ADDRBASE + I2C_OPR);
- writel(data[4] | (0x1ul << 7), SRAM_I2C_ADDRBASE + I2C_OPR);
- sram_i2c_delay(10);
- writel(data[4]&(~(0x1ul << 7)), SRAM_I2C_ADDRBASE + I2C_OPR);
- writel(0x0, SRAM_I2C_ADDRBASE + I2C_LCMR);
- //disable arq
- writel(0x0, SRAM_I2C_ADDRBASE + I2C_IER);
- writel(data[4]&(~0x03f), SRAM_I2C_ADDRBASE + I2C_OPR);
- //enable i2c core
- writel(data[4] | I2C_CORE_ENABLE , SRAM_I2C_ADDRBASE + I2C_OPR);
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_deinit
-Desc : de-initialize the necessary registers
-Params : noe
-Return : none
-------------------------------------------------------------------------------------------------------*/
-void __sramfunc sram_i2c_deinit(void)
-{
- SRAM_I2C_CLK_ENABLE();
- //restore i2c opr reg
- writel(data[4], SRAM_I2C_ADDRBASE + I2C_OPR);
-
- //restore iomux reg
- writel(data[3], RK29_GRF_BASE + GRF_GPIO_IOMUX);
-
- //restore cru gate2
- writel(data[2], RK29_CRU_BASE + CRU_CLKGATE_ADDR);
-
- //restore scu clock reg
- writel(data[1], RK29_CRU_BASE + CRU_CLKSEL0_CON);
-
- //restore cru gate1
- writel(data[0], RK29_CRU_BASE + CRU_CLKGATE1_CON);
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_start
-Desc : start i2c
-Params : none
-Return : none
-------------------------------------------------------------------------------------------------------*/
-void __sramfunc sram_i2c_start(void)
-{
- writel(I2C_LCMR_START | I2C_LCMR_RESUME, SRAM_I2C_ADDRBASE + I2C_LCMR);
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_stop
-Desc : stop i2c
-Params : none
-Return : none
-------------------------------------------------------------------------------------------------------*/
-void __sramfunc sram_i2c_stop(void)
-{
- writel(I2C_LCMR_STOP | I2C_LCMR_RESUME, SRAM_I2C_ADDRBASE + I2C_LCMR);
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_wait_event
-Desc : wait the ack
-Params : none
-Return : success: return 0; fail: return 1
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_wait_event(void)
-{
- unsigned int isr, waiteSendDelay = 3;
-
- isr = readl(SRAM_I2C_ADDRBASE + I2C_ISR);
-
- while (waiteSendDelay > 0)
- {
- if ((isr & I2C_ARBITR_LOSE_STATUS) != 0)
- {
- writel(0x0, SRAM_I2C_ADDRBASE + I2C_ISR);
- return 1;
- }
- if ((isr & I2C_RECE_INT_MACK) != 0)
- {
- break;
- }
- sram_i2c_delay(1);
- waiteSendDelay--;
- }
- writel(isr & (~0x1ul) , SRAM_I2C_ADDRBASE + I2C_ISR);
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_send_data
-Desc : send a byte data
-Params : buf: the data we need to send;
- startbit: startbit=1, send a start signal
- startbit=0, do not send a start signal
-Return : success: return 0; fail: return 1
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_send_data(uint8 buf, uint8 startbit)
-{
- writel(buf, SRAM_I2C_ADDRBASE + I2C_MTXR);
- readl(SRAM_I2C_ADDRBASE + I2C_LCMR);
- if(startbit)
- {
- writel(I2C_LCMR_START | I2C_LCMR_RESUME, SRAM_I2C_ADDRBASE + I2C_LCMR);
- sram_i2c_delay(50);
- }
- else
- {
- writel(I2C_LCMR_RESUME, SRAM_I2C_ADDRBASE + I2C_LCMR);
- sram_i2c_delay(50);
- }
-
- if(sram_i2c_wait_event() != 0)
- return 1;
-
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_send_data
-Desc : receive a byte data
-Params : buf: save the data we received
-Return : success: return 0; fail: return 1
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_read_data(uint8 *buf)
-{
- unsigned int ret;
- uint8 waitDelay = 3;
-
- ret = readl(SRAM_I2C_ADDRBASE + I2C_LCMR);
- writel(ret | I2C_LCMR_RESUME, SRAM_I2C_ADDRBASE + I2C_LCMR);
-
- while(waitDelay > 0)
- {
- ret = readl(SRAM_I2C_ADDRBASE + I2C_ISR);
- if((ret & I2C_ARBITR_LOSE_STATUS) != 0)
- return 1;
-
- if((ret & I2C_RECE_INT_MACKP) != 0)
- break;
-
- waitDelay--;
- }
-
- sram_i2c_delay(50);
- *buf = (uint8)readl(SRAM_I2C_ADDRBASE + I2C_MRXR);
- ret = readl(SRAM_I2C_ADDRBASE + I2C_ISR);
- writel(ret & (~(0x1 << 1)), SRAM_I2C_ADDRBASE + I2C_ISR);
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_slaveAdr
-Desc : send the slaveAddr in 10bit mode or in 7bit mode
-Params : I2CSlaveAddr: slave address
- addressbit: high 4bits determine 7 bits or 10 bits slave address锛沴ow 4bits determine 8 bits or 16 bits regAddress
- high 4bits==7, slave address is 7 bits
- high 4bits==10,slave address is 10 bits
- low 4bits==0, slave address is 8 bits
- low 4bits==1, slave address is 16 bits
- read_or_write: read a data or write a data from salve
-Return : sucess return 0, fail return 0
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_slaveAdr(uint16 I2CSlaveAddr, uint8 addressBit, uint8 read_or_write)
-{
- uint8 retv = 1;
-
- if((addressBit & 0xf0) == 0x10) //10bit slave address
- {
- if(sram_i2c_send_data((I2CSlaveAddr >> 7) & 0x06 | 0xf0 | read_or_write, 1) != 0)
- goto STOP;
-
- sram_i2c_delay(50);
- if(sram_i2c_send_data((I2CSlaveAddr) & 0xff | read_or_write, 0) != 0)
- goto STOP;
- }
- else //7bit slave address
- {
- if(sram_i2c_send_data((I2CSlaveAddr << 1) | read_or_write, 1) != 0)
- goto STOP;
- }
-
- retv = 0;
-
-STOP:
- //sram_i2c_stop();
- return retv;
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_wirte
-Desc : conduct wirte operation
-Params : I2CSlaveAddr: slave address
- regAddr: slave register address
- *pdataBuff: data we want to write
- size: number of bytes
- addressbit: high 4bits determine 7 bits or 10 bits slave address锛沴ow 4bits determine 8 bits or 16 bits regAddress
- high 4bits==7, slave address is 7 bits
- high 4bits==10,slave address is 10 bits
- low 4bits==0, slave address is 8 bits
- low 4bits==1, slave address is 16 bits
-Return : success: return 0; fail: return 1
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_write(uint16 I2CSlaveAddr, uint16 regAddr, void *pdataBuff, uint16 size, uint8 addressBit)
-{
- unsigned int ret;
- uint8 *pdata;
- uint8 bit_if16 = (addressBit & 0x0f) ? 0x2 : 0x1;
- uint8 retv = 1;
-
- pdata = (uint8 *) pdataBuff;
-
- sram_i2c_set_mode();
-
- sram_i2c_delay(50);
- if((retv = sram_i2c_slaveAdr(I2CSlaveAddr, addressBit, SRAM_I2C_WRITE)) != 0)
- goto STOP;
- sram_i2c_delay(50);
-
- do
- {
- bit_if16--;
- if (sram_i2c_send_data((regAddr >> (bit_if16 ? 8 : 0)) & 0xff, 0) != 0)
- goto STOP;
-
- }
- while(bit_if16);
-
- sram_i2c_delay(50);
-
- do
- {
- if (sram_i2c_send_data(*pdata, 0) != 0)
- goto STOP;
- sram_i2c_delay(50);
- pdata++;
- size--;
- }
- while (size);
-
- retv = 0;
- ret = readl( SRAM_I2C_ADDRBASE + I2C_CONR);
- writel(ret | I2C_CON_NACK, SRAM_I2C_ADDRBASE + I2C_CONR);
-
-STOP:
- sram_i2c_stop();
- return retv;
-}
-
-
-/*-------------------------------------------------------------------------------------------------------
-Name : sram_i2c_read
-Desc : conduct read operation
-Params : I2CSlaveAddr: slave address
- regAddr: slave register address
- *pdataBuff: save the data master received
- size: number of bytes
- addressbit: high 4bits determine 7 bits or 10 bits slave address锛沴ow 4bits determine 8 bits or 16 bits regAddress
- high 4bits==7, slave address is 7 bits
- high 4bits==10,slave address is 10 bits
- low 4bits==0, slave address is 8 bits
- low 4bits==1, slave address is 16 bits
- mode: mode=0, NORMALMODE
- mode=1, DIRECTMODE
-Return : success: return 0; fail: return 1
-------------------------------------------------------------------------------------------------------*/
-uint8 __sramfunc sram_i2c_read(uint16 I2CSlaveAddr, uint16 regAddr, void *pdataBuff, uint16 size, uint8 addressBit)
-{
- uint8 *pdata;
- unsigned int ret;
- uint8 bit_if16 = (addressBit & 0x0f) ? 0x2 : 0x1;
- uint8 retv = 1;
-
- pdata = (uint8 *)pdataBuff;
- sram_i2c_set_mode();
- //sram_i2c_delay(50);
-
- if((retv = sram_i2c_slaveAdr(I2CSlaveAddr, addressBit, SRAM_I2C_WRITE)) != 0)
- goto STOP;
- //sram_i2c_delay(50);
-
- do
- {
- bit_if16--;
- if (sram_i2c_send_data((regAddr >> (bit_if16 ? 8 : 0)) & 0xff, 0) != 0)
- goto STOP;
- }
- while(bit_if16);
-
- sram_i2c_delay(50);
-
- if((retv = sram_i2c_slaveAdr(I2CSlaveAddr, addressBit, SRAM_I2C_READ)) != 0)
- goto STOP;
-
- writel((ret&(~(0x1 << 3))) | I2C_MASTER_RECE_MODE | I2C_MASTER_PORT_ENABLE, SRAM_I2C_ADDRBASE + I2C_CONR);
- do
- {
- ret = readl(SRAM_I2C_ADDRBASE + I2C_CONR);
- if(size == 1)
- {
- if((sram_i2c_read_data(pdata)) != 0)
- goto STOP;
- writel(ret | I2C_CON_NACK, SRAM_I2C_ADDRBASE + I2C_CONR);
- }
- else
- {
- if((sram_i2c_read_data(pdata)) != 0)
- goto STOP;
- writel(ret & (~(0x1ul << 4)) | I2C_CON_ACK, SRAM_I2C_ADDRBASE + I2C_CONR);
- }
- //sram_i2c_delay(50);
- pdata++;
- size--;
- }
- while (size);
-
- retv = 0;
-
-STOP:
- sram_i2c_stop();
- return retv;
-}
-unsigned int __sramfunc rk29_suspend_voltage_set(unsigned int vol)
-{
- uint8 slaveaddr;
- uint16 slavereg;
- unsigned int ret, mask, addr;
- uint8 data[2];
-
- sram_i2c_init(); //init i2c device
- slaveaddr = I2C_SADDR; //slave device addr
- slavereg = 0x4003; // reg addr
-
- data[0] = 0x00; //clear i2c when read
- data[1] = 0x00;
- ret = sram_i2c_read(slaveaddr, slavereg, data, SRAM_I2C_DATA_BYTE, I2C_SLAVE_TYPE);
- // print_Hex(data[0]); //read data saved in data
- // print_Hex(data[1]); //read data saved in data
- //sram_printch('\n');
-
- data[0] |= (0x1<<6); //write data
- sram_i2c_write(slaveaddr, slavereg, data, SRAM_I2C_DATA_BYTE, I2C_SLAVE_TYPE);//wm831x enter sleep mode
- sram_i2c_delay(50);
-
- sram_i2c_deinit(); //deinit i2c device
-
-}
-
-void __sramfunc rk29_suspend_voltage_resume(unsigned int vol)
-{
- uint8 slaveaddr;
- uint16 slavereg;
- unsigned int ret, mask, addr;
- uint8 data[2];
-
- sram_i2c_init(); //init i2c device
- slaveaddr = I2C_SADDR; //slave device addr
- slavereg = 0x4003; // reg addr
-
- data[0] = 0x00; //clear i2c when read
- data[1] = 0x00;
- ret = sram_i2c_read(slaveaddr, slavereg, data, SRAM_I2C_DATA_BYTE, I2C_SLAVE_TYPE);
- // print_Hex(data[0]); //read data saved in data
- // print_Hex(data[1]); //read data saved in data
- // sram_printch('\n');
-
- data[0] &= ~(0x1<<6); //write data
- sram_i2c_write(slaveaddr, slavereg, data, SRAM_I2C_DATA_BYTE, I2C_SLAVE_TYPE);//wm831x exit sleep mode
- sram_i2c_delay(50);
-
- sram_i2c_deinit(); //deinit i2c device
-
-}
-
-#endif
-#endif
#include <asm/io.h>
#include <mach/gpio.h>
-#include <asm/vfp.h>
-#if 1
-void __sramfunc sram_printch(char byte);
-void __sramfunc printhex(unsigned int hex);
-#define sram_printHX(a)
-#else
-#define sram_printch(a)
-#define sram_printHX(a)
-#endif
-
-#define grf_readl(offset) readl(RK29_GRF_BASE + offset)
-#define grf_writel(v, offset) do { writel(v, RK29_GRF_BASE + offset); readl(RK29_GRF_BASE + offset); } while (0)
-
-#define sram_udelay(usecs,a) LOOP((usecs)*LOOPS_PER_USEC)
#if defined(CONFIG_RK29_SPI_INSRAM)
#define SPI_SR_SPEED (2*SPI_MHZ)
-#if defined(CONFIG_MACH_RK29_A22)||defined(CONFIG_MACH_RK29_PHONESDK)||defined(CONFIG_MACH_RK29_TD8801_V2)
+#if defined(CONFIG_MACH_RK29_A22)||defined(CONFIG_MACH_RK29_PHONESDK)
#define SRAM_SPI_CH 1
#define SRAM_SPI_CS 1
SPI_SER,
DATE_END,
};
+#if 1
+void __sramfunc sram_printch(char byte);
+void __sramfunc printhex(unsigned int hex);
+#define sram_printHX(a)
+#else
+#define sram_printch(a)
+#define sram_printHX(a)
+#endif
+
static u32 __sramdata spi_data[DATE_END]={};
#define sram_spi_dis() spi_writel(spi_readl(SPIM_ENR)&~(0x1<<0),SPIM_ENR)
#define spi_readl(offset) readl(SRAM_SPI_ADDRBASE + offset)
#define spi_writel(v, offset) writel(v, SRAM_SPI_ADDRBASE+ offset)
+#define grf_readl(offset) readl(RK29_GRF_BASE + offset)
+#define grf_writel(v, offset) do { writel(v, RK29_GRF_BASE + offset); readl(RK29_GRF_BASE + offset); } while (0)
+
+#define sram_udelay(usecs,a) LOOP((usecs)*LOOPS_PER_USEC)
#define SPI_GATE1_MASK 0xCF
#endif
/*******************************************gpio*********************************************/
#ifdef CONFIG_RK29_CLK_SWITCH_TO_32K
-#define PM_GETGPIO_BASE(N) RK29_GPIO##N##_BASE
-#define PM_GPIO_DR 0
-#define PM_GPIO_DDR 0x4
-#define PM_GPIO_INTEN 0x30
__sramdata u32 pm_gpio_base[7]=
{
RK29_GPIO0_BASE,
}
}
#endif
-/*****************************************gpio ctr*********************************************/
-#if defined(CONFIG_RK29_GPIO_SUSPEND)
-#define GRF_GPIO0_DIR 0x000
-#define GRF_GPIO1_DIR 0x004
-#define GRF_GPIO2_DIR 0x008
-#define GRF_GPIO3_DIR 0x00c
-#define GRF_GPIO4_DIR 0x010
-#define GRF_GPIO5_DIR 0x014
-
-
-#define GRF_GPIO0_DO 0x018
-#define GRF_GPIO1_DO 0x01c
-#define GRF_GPIO2_DO 0x020
-#define GRF_GPIO3_DO 0x024
-#define GRF_GPIO4_DO 0x028
-#define GRF_GPIO5_DO 0x02c
-
-#define GRF_GPIO0_EN 0x030
-#define GRF_GPIO1_EN 0x034
-#define GRF_GPIO2_EN 0x038
-#define GRF_GPIO3_EN 0x03c
-#define GRF_GPIO4_EN 0x040
-#define GRF_GPIO5_EN 0x044
-
-
-#define GRF_GPIO0L_IOMUX 0x048
-#define GRF_GPIO0H_IOMUX 0x04c
-#define GRF_GPIO1L_IOMUX 0x050
-#define GRF_GPIO1H_IOMUX 0x054
-#define GRF_GPIO2L_IOMUX 0x058
-#define GRF_GPIO2H_IOMUX 0x05c
-#define GRF_GPIO3L_IOMUX 0x060
-#define GRF_GPIO3H_IOMUX 0x064
-#define GRF_GPIO4L_IOMUX 0x068
-#define GRF_GPIO4H_IOMUX 0x06c
-#define GRF_GPIO5L_IOMUX 0x070
-#define GRF_GPIO5H_IOMUX 0x074
-
-typedef struct GPIO_IOMUX
-{
- unsigned int GPIOL_IOMUX;
- unsigned int GPIOH_IOMUX;
-}GPIO_IOMUX_PM;
-
-//GRF Registers
-typedef struct REG_FILE_GRF
-{
- unsigned int GRF_GPIO_DIR[6];
- unsigned int GRF_GPIO_DO[6];
- unsigned int GRF_GPIO_EN[6];
- GPIO_IOMUX_PM GRF_GPIO_IOMUX[6];
- unsigned int GRF_GPIO_PULL[7];
-} GRF_REG_SAVE;
-
-
-static GRF_REG_SAVE pm_grf;
-int __sramdata crumode;
- u32 __sramdata gpio2_pull,gpio6_pull;
-//static GRF_REG_SAVE __sramdata pm_grf;
-static void pm_keygpio_prepare(void)
-{
- gpio6_pull = grf_readl(GRF_GPIO6_PULL);
- gpio2_pull = grf_readl(GRF_GPIO2_PULL);
-}
- void pm_keygpio_sdk_suspend(void)
-{
- pm_keygpio_prepare();
- grf_writel(gpio6_pull|0x7f,GRF_GPIO6_PULL);//key pullup/pulldown disable
- grf_writel(gpio2_pull|0x00000f30,GRF_GPIO2_PULL);
-}
- void pm_keygpio_sdk_resume(void)
-{
- grf_writel(gpio6_pull,GRF_GPIO6_PULL);//key pullup/pulldown enable
- grf_writel(gpio2_pull,GRF_GPIO2_PULL);
-}
- void pm_keygpio_a22_suspend(void)
-{
- pm_keygpio_prepare();
- grf_writel(gpio6_pull|0x7f,GRF_GPIO6_PULL);//key pullup/pulldown disable
- grf_writel(gpio2_pull|0x00000900,GRF_GPIO2_PULL);
-}
- void pm_keygpio_a22_resume(void)
-{
- grf_writel(gpio6_pull,GRF_GPIO6_PULL);//key pullup/pulldown enable
- grf_writel(gpio2_pull,GRF_GPIO2_PULL);
-}
-
-
-static void pm_spi_gpio_prepare(void)
-{
- pm_grf.GRF_GPIO_IOMUX[1].GPIOL_IOMUX = grf_readl(GRF_GPIO1L_IOMUX);
- pm_grf.GRF_GPIO_IOMUX[2].GPIOH_IOMUX = grf_readl(GRF_GPIO2H_IOMUX);
-
- pm_grf.GRF_GPIO_PULL[1] = grf_readl(GRF_GPIO1_PULL);
- pm_grf.GRF_GPIO_PULL[2] = grf_readl(GRF_GPIO2_PULL);
-
- pm_grf.GRF_GPIO_EN[1] = grf_readl(GRF_GPIO1_EN);
- pm_grf.GRF_GPIO_EN[2] = grf_readl(GRF_GPIO2_EN);
-}
-
- void pm_spi_gpio_suspend(void)
-{
- int io1L_iomux;
- int io2H_iomux;
- int io1_pull,io2_pull;
- int io1_en,io2_en;
-
- pm_spi_gpio_prepare();
-
- io1L_iomux = grf_readl(GRF_GPIO1L_IOMUX);
- io2H_iomux = grf_readl(GRF_GPIO2H_IOMUX);
-
- grf_writel(io1L_iomux&(~((0x03<<6)|(0x03 <<8))), GRF_GPIO1L_IOMUX);
- grf_writel(io2H_iomux&0xffff0000, GRF_GPIO2H_IOMUX);
-
- io1_pull = grf_readl(GRF_GPIO1_PULL);
- io2_pull = grf_readl(GRF_GPIO2_PULL);
-
- grf_writel(io1_pull|0x18,GRF_GPIO1_PULL);
- grf_writel(io2_pull|0x00ff0000,GRF_GPIO2_PULL);
-
- io1_en = grf_readl(GRF_GPIO1_EN);
- io2_en = grf_readl(GRF_GPIO2_EN);
-
- grf_writel(io1_en|0x18,GRF_GPIO1_EN);
- grf_writel(io2_en|0x00ff0000,GRF_GPIO2_EN);
-}
-
- void pm_spi_gpio_resume(void)
-{
- grf_writel(pm_grf.GRF_GPIO_EN[1],GRF_GPIO1_EN);
- grf_writel(pm_grf.GRF_GPIO_EN[2],GRF_GPIO2_EN);
- grf_writel(pm_grf.GRF_GPIO_PULL[1],GRF_GPIO1_PULL);
- grf_writel(pm_grf.GRF_GPIO_PULL[2],GRF_GPIO2_PULL);
-
- grf_writel(pm_grf.GRF_GPIO_IOMUX[1].GPIOL_IOMUX, GRF_GPIO1L_IOMUX);
- grf_writel(pm_grf.GRF_GPIO_IOMUX[2].GPIOH_IOMUX, GRF_GPIO2H_IOMUX);
-}
-
-void pm_gpio_suspend(void)
-{
- pm_spi_gpio_suspend(); // spi pullup/pulldown disable....
- #if defined(CONFIG_MACH_RK29_PHONESDK)
- { pm_keygpio_sdk_suspend();// key pullup/pulldown disable.....
- }
- #endif
- #if defined(CONFIG_MACH_RK29_A22)
- { pm_keygpio_a22_suspend();// key pullup/pulldown disable.....
- }
- #endif
-}
-void pm_gpio_resume(void)
-{
- pm_spi_gpio_resume(); // spi pullup/pulldown enable.....
- #if defined(CONFIG_MACH_RK29_PHONESDK)
- { pm_keygpio_sdk_resume();// key pullup/pulldown enable.....
- }
- #endif
- #if defined(CONFIG_MACH_RK29_A22)
- { pm_keygpio_a22_resume();// key pullup/pulldown enable.....
- }
- #endif
-}
-#else
-void pm_gpio_suspend(void)
-{}
-void pm_gpio_resume(void)
-{}
-#endif
-/*************************************neon powerdomain******************************/
-#define vfpreg(_vfp_) #_vfp_
-
-#define fmrx(_vfp_) ({ \
- u32 __v; \
- asm("mrc p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmrx %0, " #_vfp_ \
- : "=r" (__v) : : "cc"); \
- __v; \
- })
-
-#define fmxr(_vfp_,_var_) \
- asm("mcr p10, 7, %0, " vfpreg(_vfp_) ", cr0, 0 @ fmxr " #_vfp_ ", %0" \
- : : "r" (_var_) : "cc")
-
-#define pmu_read(offset) readl(RK29_PMU_BASE + (offset))
-#define pmu_write(offset, value) writel((value), RK29_PMU_BASE + (offset))
-#define PMU_PG_CON 0x10
-extern void vfp_save_state(void *location, u32 fpexc);
-extern void vfp_load_state(void *location, u32 fpexc);
- static u64 __sramdata saveptr[33]={};
-void neon_powerdomain_off(void)
-{
- int ret,i=0;
- int *p;
- p=&saveptr;
- unsigned int fpexc = fmrx(FPEXC); //get neon Logic gate
-
- fmxr(FPEXC, fpexc | FPEXC_EN); //open neon Logic gate
- for(i=0;i<34;i++){
- vfp_save_state(p,fpexc); //save neon reg,32 D reg,2 control reg
- p++;
- }
- fmxr(FPEXC, fpexc & ~FPEXC_EN); //close neon Logic gate
-
- ret=pmu_read(PMU_PG_CON); //get power domain state
- pmu_write(PMU_PG_CON,ret|(0x1<<1)); //powerdomain off neon
-
-}
-void neon_powerdomain_on(void)
-{
- int ret,i=0;
- int *p;
- p=&saveptr;
-
- ret=pmu_read(PMU_PG_CON); //get power domain state
- pmu_write(PMU_PG_CON,ret&~(0x1<<1)); //powerdomain on neon
- sram_udelay(5000,24);
-
- unsigned int fpexc = fmrx(FPEXC); //get neon Logic gate
- fmxr(FPEXC, fpexc | FPEXC_EN); //open neon Logic gate
- for(i=0;i<34;i++){
- vfp_load_state(p,fpexc); //recovery neon reg, 32 D reg,2 control reg
- p++;
- }
- fmxr(FPEXC, fpexc | FPEXC_EN); //open neon Logic gate
-
-}
-
-
-
-
/*************************************************32k**************************************/
#ifdef CONFIG_RK29_CLK_SWITCH_TO_32K
-//static int __sramdata crumode;
+static int __sramdata crumode;
void __sramfunc pm_clk_switch_32k(void)
{
int vol;
#include <linux/workqueue.h>\r
#include <asm/atomic.h>\r
#include <linux/vmalloc.h> \r
-#include <linux/slab.h>
-
#if 1\r
#define DBGERR(x...) printk(KERN_INFO x)\r
#else\r
#include "smsendian.h"
#include "sms-cards.h"
#include <mach/gpio.h>
-#include <linux/slab.h>
#define MAX_GPIO_PIN_NUMBER 31
unsigned int cmmb_pw_rst;
unsigned int cmmb_irq;
void (*io_init_mux)(void);
- void (*cmmb_io_pm)(void);
- void (*cmmb_power_on)(void);
- void (*cmmb_power_down)(void);
};
#endif /* __SMS_SPI_PHY_H__ */
{
struct rk29_button_light_info *button_light_info = pdev->dev.platform_data;
- rk29_button_light_device = backlight_device_register("rk28_button_light", &pdev->dev, NULL, &rk29_button_light_ops,NULL);
+ rk29_button_light_device = backlight_device_register("rk28_button_light", &pdev->dev, NULL, &rk29_button_light_ops);
if (!rk29_button_light_device) {
DBG("rk29_button_light_probe error\n");
return -ENODEV;
platform_driver_unregister(&rk29fb_driver);
}
-#if defined(CONFIG_MACH_RK29_TD8801_V2)
-rootfs_initcall(rk29fb_init);
-#else
fs_initcall(rk29fb_init);
-#endif
module_exit(rk29fb_exit);
+++ /dev/null
-#ifndef __LINUX_SMPLOCK_H
-#define __LINUX_SMPLOCK_H
-
-#ifdef CONFIG_LOCK_KERNEL
-#include <linux/sched.h>
-
-#define kernel_locked() (current->lock_depth >= 0)
-
-extern int __lockfunc __reacquire_kernel_lock(void);
-extern void __lockfunc __release_kernel_lock(void);
-
-/*
- * Release/re-acquire global kernel lock for the scheduler
- */
-#define release_kernel_lock(tsk) do { \
- if (unlikely((tsk)->lock_depth >= 0)) \
- __release_kernel_lock(); \
-} while (0)
-
-static inline int reacquire_kernel_lock(struct task_struct *task)
-{
- if (unlikely(task->lock_depth >= 0))
- return __reacquire_kernel_lock();
- return 0;
-}
-
-extern void __lockfunc lock_kernel(void) __acquires(kernel_lock);
-extern void __lockfunc unlock_kernel(void) __releases(kernel_lock);
-
-/*
- * Various legacy drivers don't really need the BKL in a specific
- * function, but they *do* need to know that the BKL became available.
- * This function just avoids wrapping a bunch of lock/unlock pairs
- * around code which doesn't really need it.
- */
-static inline void cycle_kernel_lock(void)
-{
- lock_kernel();
- unlock_kernel();
-}
-
-#else
-
-#define lock_kernel() do { } while(0)
-#define unlock_kernel() do { } while(0)
-#define release_kernel_lock(task) do { } while(0)
-#define cycle_kernel_lock() do { } while(0)
-#define reacquire_kernel_lock(task) 0
-#define kernel_locked() 1
-
-#endif /* CONFIG_LOCK_KERNEL */
-#endif /* __LINUX_SMPLOCK_H */
/* pointer to private data */
void *dev_priv;
void *host_priv;
- void *priv;
/* subdev device node */
struct video_device devnode;
/* number of events to be allocated on open */
projects / firefly-linux-kernel-4.4.55.git / commitdiff