--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32.9
+# Fri Aug 6 21:40:27 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_TCM=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+# CONFIG_CGROUP_NS is not set
+CONFIG_CGROUP_FREEZER=y
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CPUSETS is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_PANIC_TIMEOUT=5
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_ASHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_RK2818=y
+
+#
+# ROCKCHIP rk2818 Board Type
+#
+# CONFIG_MACH_RK2818MID is not set
+# CONFIG_MACH_RK2818PHONE is not set
+# CONFIG_MACH_RAHO is not set
+CONFIG_MACH_RK2818INFO=y
+CONFIG_RK28_GPIO_IRQ=16
+CONFIG_RK28_ADC=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="mem=128M console=ttyS1,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HAS_WAKELOCK=y
+CONFIG_HAS_EARLYSUSPEND=y
+CONFIG_WAKELOCK=y
+CONFIG_WAKELOCK_STAT=y
+CONFIG_USER_WAKELOCK=y
+CONFIG_EARLYSUSPEND=y
+# CONFIG_NO_USER_SPACE_SCREEN_ACCESS_CONTROL is not set
+# CONFIG_CONSOLE_EARLYSUSPEND is not set
+CONFIG_FB_EARLYSUSPEND=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+CONFIG_ANDROID_PARANOID_NETWORK=y
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_RK2818=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_ANDROID_PMEM=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_KERNEL_DEBUGGER_CORE is not set
+# CONFIG_ISL29003 is not set
+CONFIG_UID_STAT=y
+CONFIG_APANIC=y
+CONFIG_APANIC_PLABEL="kpanic"
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+CONFIG_DM9000_USE_NAND_CONTROL=y
+# CONFIG_DM9000_USE_NOR_CONTROL is not set
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=y
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_PPPOLAC=y
+CONFIG_PPPOPNS=y
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_KEYRESET=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_RK28ADC=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+CONFIG_TOUCHSCREEN_XPT2046_SPI=y
+# CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI is not set
+# CONFIG_TOUCHSCREEN_XPT2046_320X480_SPI is not set
+# CONFIG_TOUCHSCREEN_XPT2046_320X480_CBN_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+CONFIG_INPUT_KEYCHORD=y
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_G_SENSOR_DEVICE is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_RK2818=y
+CONFIG_SERIAL_RK2818_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_DCC_TTY is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_RK2818=y
+
+#
+# Now, there are two I2C interfaces selected by developer, I2C0 and I2C1.
+#
+CONFIG_I2C0_RK2818=y
+CONFIG_I2C1_RK2818=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_PCA963X is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPIM_RK2818=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_FPGA is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_GPIO_PCA9554 is not set
+CONFIG_EXPANDED_GPIO_NUM=0
+CONFIG_EXPANDED_GPIO_IRQ_NUM=0
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_RK2818 is not set
+# CONFIG_PMIC_LP8725 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_RK2818=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_RK2818_BL=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+# CONFIG_LCD_NULL is not set
+CONFIG_LCD_TD043MGEA1=y
+# CONFIG_LCD_HX8357 is not set
+# CONFIG_LCD_TJ048NC01CA is not set
+# CONFIG_LCD_HL070VM4AU is not set
+# CONFIG_LCD_HSD070IDW1 is not set
+# CONFIG_LCD_A060SE02 is not set
+# CONFIG_LCD_S1D13521 is not set
+# CONFIG_LCD_NT35582 is not set
+# CONFIG_LCD_NT35580 is not set
+CONFIG_TV_NULL=y
+CONFIG_HDMI_NULL=y
+# CONFIG_HDMI_ANX7150 is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_ROCKCHIP_SOC=y
+CONFIG_SND_ROCKCHIP_SOC_I2S=y
+# CONFIG_SND_ROCKCHIP_SOC_WM8988 is not set
+CONFIG_SND_ROCKCHIP_SOC_WM8994=y
+# CONFIG_SND_CODEC_SOC_MASTER is not set
+CONFIG_SND_CODEC_SOC_SLAVE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM8994=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+CONFIG_USB_GADGET_DWC_OTG=y
+CONFIG_USB_DWC_OTG=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_ANDROID=y
+# CONFIG_USB_ANDROID_ACM is not set
+# CONFIG_USB_ANDROID_ADB is not set
+CONFIG_USB_ANDROID_MASS_STORAGE=y
+CONFIG_USB_ANDROID_RNDIS=y
+CONFIG_USB_ANDROID_RNDIS_WCEIS=y
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_RK2818_HOST11 is not set
+CONFIG_DWC_OTG=y
+# CONFIG_DWC_OTG_DEBUG is not set
+# CONFIG_DWC_OTG_HOST_ONLY is not set
+CONFIG_DWC_OTG_DEVICE_ONLY=y
+# CONFIG_DWC_OTG_BOTH_HOST_SLAVE is not set
+# CONFIG_DWC_OTG_NORMAL_PREFERENCE is not set
+# CONFIG_DWC_OTG_HOST_PREFERENCE is not set
+CONFIG_DWC_OTG_DEVICE_PREFERENCE=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_MMC_EMBEDDED_SDIO=y
+# CONFIG_MMC_PARANOID_SD_INIT is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_MMC_BLOCK_DEFERRED_RESUME=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_SDMMC_RK2818=y
+
+#
+# Now, there are two SDMMC controllers selected, SDMMC0 and SDMMC1.
+#
+CONFIG_SDMMC0_RK2818=y
+CONFIG_SDMMC1_RK2818=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_SWITCH=y
+CONFIG_SWITCH_GPIO=y
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+# CONFIG_RTC_INTF_DEV is not set
+CONFIG_RTC_INTF_ALARM=y
+CONFIG_RTC_INTF_ALARM_DEV=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_HYM8563=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_ECHO is not set
+
+#
+# Android
+#
+CONFIG_ANDROID=y
+CONFIG_ANDROID_BINDER_IPC=y
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_RAM_CONSOLE=y
+CONFIG_ANDROID_RAM_CONSOLE_ENABLE_VERBOSE=y
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION=y
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_DATA_SIZE=128
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_ECC_SIZE=16
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_SYMBOL_SIZE=8
+CONFIG_ANDROID_RAM_CONSOLE_ERROR_CORRECTION_POLYNOMIAL=0x11d
+# CONFIG_ANDROID_RAM_CONSOLE_EARLY_INIT is not set
+CONFIG_ANDROID_TIMED_OUTPUT=y
+CONFIG_ANDROID_TIMED_GPIO=y
+CONFIG_ANDROID_LOW_MEMORY_KILLER=y
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+
+#
+# DSP
+#
+# CONFIG_RK2818_DSP is not set
+
+#
+# RK1000 control
+#
+# CONFIG_RK1000_CONTROL is not set
+
+#
+# rk2818 POWER CONTROL
+#
+CONFIG_RK2818_POWER=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_ENC8=y
+CONFIG_REED_SOLOMON_DEC8=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+/* linux/arch/arm/mach-rk2818/board-phonesdk.c
+ *
+ * Copyright (C) 2010 ROCKCHIP, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/irqs.h>
+#include <mach/board.h>
+#include <mach/rk2818_iomap.h>
+#include <mach/iomux.h>
+#include <mach/gpio.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include "devices.h"
+
+
+/* --------------------------------------------------------------------
+ * ÉùÃ÷ÁËrk2818_gpioBankÊý×飬²¢¶¨ÒåÁËGPIO¼Ä´æÆ÷×éIDºÍ¼Ä´æÆ÷»ùµØÖ·¡£
+ * -------------------------------------------------------------------- */
+
+static struct rk2818_gpio_bank rk2818_gpioBank[] = {
+ {
+ .id = RK2818_ID_PIOA,
+ .offset = RK2818_GPIO0_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOB,
+ .offset = RK2818_GPIO0_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOC,
+ .offset = RK2818_GPIO0_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOD,
+ .offset = RK2818_GPIO0_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOE,
+ .offset = RK2818_GPIO1_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOF,
+ .offset = RK2818_GPIO1_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOG,
+ .offset = RK2818_GPIO1_BASE,
+ .clock = NULL,
+ },
+ {
+ .id = RK2818_ID_PIOH,
+ .offset = RK2818_GPIO1_BASE,
+ .clock = NULL,
+ }
+};
+
+//IOÓ³É䷽ʽÃèÊö £¬Ã¿¸öΪһ¶ÎÏßÐÔÁ¬ÐøÓ³Éä
+static struct map_desc rk2818_io_desc[] __initdata = {
+
+ {
+ .virtual = RK2818_MCDMA_BASE, //ÐéÄâµØÖ·
+ .pfn = __phys_to_pfn(RK2818_MCDMA_PHYS), //ÎïÀíµØÖ·£¬ÐëÓëÒ³±í¶ÔÆë
+ .length = RK2818_MCDMA_SIZE, //³¤¶È
+ .type = MT_DEVICE //Ó³É䷽ʽ
+ },
+
+ {
+ .virtual = RK2818_DWDMA_BASE,
+ .pfn = __phys_to_pfn(RK2818_DWDMA_PHYS),
+ .length = RK2818_DWDMA_SIZE,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_INTC_BASE,
+ .pfn = __phys_to_pfn(RK2818_INTC_PHYS),
+ .length = RK2818_INTC_SIZE,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_NANDC_BASE,
+ .pfn = __phys_to_pfn(RK2818_NANDC_PHYS),
+ .length = RK2818_NANDC_SIZE,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_SDRAMC_BASE,
+ .pfn = __phys_to_pfn(RK2818_SDRAMC_PHYS),
+ .length = RK2818_SDRAMC_SIZE,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_ARMDARBITER_BASE,
+ .pfn = __phys_to_pfn(RK2818_ARMDARBITER_PHYS),
+ .length = RK2818_ARMDARBITER_SIZE,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_APB_BASE,
+ .pfn = __phys_to_pfn(RK2818_APB_PHYS),
+ .length = 0xa0000,
+ .type = MT_DEVICE
+ },
+
+ {
+ .virtual = RK2818_WDT_BASE,
+ .pfn = __phys_to_pfn(RK2818_WDT_PHYS),
+ .length = 0xa0000, ///apb bus i2s i2c spi no map in this
+ .type = MT_DEVICE
+ },
+};
+/*****************************************************************************************
+ * SDMMC devices
+ *author: kfx
+*****************************************************************************************/
+ void rk2818_sdmmc0_cfg_gpio(struct platform_device *dev)
+{
+ rk2818_mux_api_set(GPIOF3_APWM1_MMC0DETN_NAME, IOMUXA_SDMMC1_DETECT_N);
+ rk2818_mux_api_set(GPIOH_MMC0D_SEL_NAME, IOMUXA_SDMMC0_DATA123);
+ rk2818_mux_api_set(GPIOH_MMC0_SEL_NAME, IOMUXA_SDMMC0_CMD_DATA0_CLKOUT);
+}
+
+void rk2818_sdmmc1_cfg_gpio(struct platform_device *dev)
+{
+ rk2818_mux_api_set(GPIOG_MMC1_SEL_NAME, IOMUXA_SDMMC1_CMD_DATA0_CLKOUT);
+ rk2818_mux_api_set(GPIOG_MMC1D_SEL_NAME, IOMUXA_SDMMC1_DATA123);
+#if 0
+ /* wifi power up (gpio control) */
+ rk2818_mux_api_set(GPIOH7_HSADCCLK_SEL_NAME,IOMUXB_GPIO1_D7);
+ rk2818_mux_api_set(GPIOF5_APWM3_DPWM3_NAME,IOMUXB_GPIO1_B5);
+ gpio_request(RK2818_PIN_PH7, "sdio");
+ gpio_direction_output(RK2818_PIN_PH7,GPIO_HIGH);
+#endif
+
+}
+#define CONFIG_SDMMC0_USE_DMA
+#define CONFIG_SDMMC1_USE_DMA
+struct rk2818_sdmmc_platform_data default_sdmmc0_data = {
+ .host_ocr_avail = (MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33|
+ MMC_VDD_33_34|MMC_VDD_34_35| MMC_VDD_35_36),
+ .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .cfg_gpio = rk2818_sdmmc0_cfg_gpio,
+ .no_detect = 0,
+ .dma_name = "sd_mmc",
+#ifdef CONFIG_SDMMC0_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+};
+struct rk2818_sdmmc_platform_data default_sdmmc1_data = {
+ .host_ocr_avail = (MMC_VDD_26_27|MMC_VDD_27_28|MMC_VDD_28_29|
+ MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32|
+ MMC_VDD_32_33|MMC_VDD_33_34),
+ .host_caps = (MMC_CAP_4_BIT_DATA|MMC_CAP_SDIO_IRQ|
+ MMC_CAP_MMC_HIGHSPEED|MMC_CAP_SD_HIGHSPEED),
+ .cfg_gpio = rk2818_sdmmc1_cfg_gpio,
+ .no_detect = 1,
+ .dma_name = "sdio",
+#ifdef CONFIG_SDMMC1_USE_DMA
+ .use_dma = 1,
+#else
+ .use_dma = 0,
+#endif
+};
+
+/*****************************************************************************************
+ * extern gpio devices
+ *author: xxx
+ *****************************************************************************************/
+#if defined (CONFIG_GPIO_PCA9554)
+struct rk2818_gpio_expander_info extern_gpio_settinginfo[] = {
+ {
+ .gpio_num =RK2818_PIN_PI0,
+ .pin_type = GPIO_IN,
+ //.pin_value =GPIO_HIGH,
+ },
+
+ {
+ .gpio_num =RK2818_PIN_PI4,// tp3
+ .pin_type = GPIO_IN,
+ //.pin_value =GPIO_HIGH,
+ },
+
+ {
+ .gpio_num =RK2818_PIN_PI5,//tp4
+ .pin_type = GPIO_IN,
+ //.pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =RK2818_PIN_PI6,//tp2
+ .pin_type = GPIO_OUT,
+ //.pin_value =GPIO_HIGH,
+ },
+ {
+ .gpio_num =RK2818_PIN_PI7,//tp1
+ .pin_type = GPIO_OUT,
+ .pin_value =GPIO_HIGH,
+ },
+
+
+
+};
+
+struct pca9554_platform_data rk2818_pca9554_data={
+ .gpio_base=GPIOS_EXPANDER_BASE,
+ .gpio_pin_num=CONFIG_EXPANDED_GPIO_NUM,
+ .gpio_irq_start=NR_AIC_IRQS + 2*NUM_GROUP,
+ .irq_pin_num=CONFIG_EXPANDED_GPIO_IRQ_NUM,
+ .pca9954_irq_pin=RK2818_PIN_PE2,
+ .settinginfo=extern_gpio_settinginfo,
+ .settinginfolen=ARRAY_SIZE(extern_gpio_settinginfo),
+ .names="pca9554",
+};
+#endif
+
+/*****************************************************************************************
+ * I2C devices
+ *author: kfx
+*****************************************************************************************/
+ void rk2818_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ rk2818_mux_api_set(GPIOE_I2C0_SEL_NAME, IOMUXA_I2C0);
+}
+
+void rk2818_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ rk2818_mux_api_set(GPIOE_U1IR_I2C1_NAME, IOMUXA_I2C1);
+}
+struct rk2818_i2c_platform_data default_i2c0_data = {
+ .bus_num = 0,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .cfg_gpio = rk2818_i2c0_cfg_gpio,
+};
+struct rk2818_i2c_platform_data default_i2c1_data = {
+#ifdef CONFIG_I2C0_RK2818
+ .bus_num = 1,
+#else
+ .bus_num = 0,
+#endif
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+ .cfg_gpio = rk2818_i2c1_cfg_gpio,
+};
+
+struct rk2818_i2c_spi_data default_i2c2_data = {
+ .bus_num = 2,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+
+};
+struct rk2818_i2c_spi_data default_i2c3_data = {
+
+ .bus_num = 3,
+ .flags = 0,
+ .slave_addr = 0xff,
+ .scl_rate = 400*1000,
+
+};
+static struct i2c_board_info __initdata board_i2c0_devices[] = {
+#if defined (CONFIG_RK1000_CONTROL)
+ {
+ .type = "rk1000_control",
+ .addr = 0x40,
+ .flags = 0,
+ },
+#endif
+
+#if defined (CONFIG_RK1000_TVOUT)
+ {
+ .type = "rk1000_tvout",
+ .addr = 0x42,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_RK1000)
+ {
+ .type = "rk1000_i2c_codec",
+ .addr = 0x60,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_SND_SOC_WM8988)
+ {
+ .type = "wm8988",
+ .addr = 0x1a,
+ .flags = 0,
+ }
+#endif
+};
+static struct i2c_board_info __initdata board_i2c1_devices[] = {
+#if defined (CONFIG_RTC_HYM8563)
+ {
+ .type = "rtc_hym8563",
+ .addr = 0x51,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_FM_QN8006)
+ {
+ .type = "fm_qn8006",
+ .addr = 0x2b,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_GPIO_PCA9554)
+ {
+ .type = "extend_gpio_pca9554",
+ .addr = 0x3c,
+ .flags = 0,
+ .platform_data=&rk2818_pca9554_data.gpio_base,
+ },
+#endif
+#if defined (CONFIG_PMIC_LP8725)
+ {
+ .type = "lp8725",
+ .addr = 0x79,
+ .flags = 0,
+ },
+#endif
+#if defined (CONFIG_GS_MMA7660)
+ {
+ .type = "gs_mma7660",
+ .addr = 0x4c,
+ .flags = 0,
+ .irq = RK2818_PIN_PE3,
+ },
+#endif
+ {},
+};
+
+static struct i2c_board_info __initdata board_i2c2_devices[] = {
+
+};
+static struct i2c_board_info __initdata board_i2c3_devices[] = {
+#if defined (CONFIG_SND_SOC_WM8994)
+ {
+ .type = "wm8994",
+ .addr = 0x1a,
+ .flags = 0,
+ },
+#endif
+};
+
+/*****************************************************************************************
+ * SPI devices
+ *author: lhh
+ *****************************************************************************************/
+static struct spi_board_info board_spi_devices[] = {
+#if defined(CONFIG_SPI_FPGA)
+ { /* fpga ice65l08xx */
+ .modalias = "spi_fpga",
+ .chip_select = 1,
+ .max_speed_hz = 8 * 1000 * 1000,
+ .bus_num = 0,
+ .mode = SPI_MODE_0,
+ },
+#endif
+#if defined(CONFIG_ENC28J60)
+ { /* net chip */
+ .modalias = "enc28j60",
+ .chip_select = 1,
+ .max_speed_hz = 12 * 1000 * 1000,
+ .bus_num = 0,
+ .mode = SPI_MODE_0,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_XPT2046_SPI) || defined(CONFIG_TOUCHSCREEN_XPT2046_CBN_SPI)
+ {
+ .modalias = "xpt2046_ts",
+ .chip_select = 0,
+ .max_speed_hz = 125 * 1000 * 26,/* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .bus_num = 0,
+ .irq = RK2818_PIN_PE3,
+ },
+#endif
+};
+
+/*rk2818_fb gpio information*/
+static struct rk2818_fb_gpio rk2818_fb_gpio_info = {
+ .display_on = (GPIO_LOW<<16)|RK2818_PIN_PB1,
+ .lcd_standby = 0,
+ .mcu_fmk_pin = 0,
+};
+
+/*rk2818_fb iomux information*/
+static struct rk2818_fb_iomux rk2818_fb_iomux_info = {
+ .data16 = GPIOC_LCDC16BIT_SEL_NAME,
+ .data18 = GPIOC_LCDC18BIT_SEL_NAME,
+ .data24 = GPIOC_LCDC24BIT_SEL_NAME,
+ .den = CXGPIO_LCDDEN_SEL_NAME,
+ .vsync = CXGPIO_LCDVSYNC_SEL_NAME,
+ .mcu_fmk = 0,
+};
+/*rk2818_fb*/
+struct rk2818_fb_mach_info rk2818_fb_mach_info = {
+ .gpio = &rk2818_fb_gpio_info,
+ .iomux = &rk2818_fb_iomux_info,
+};
+
+struct rk2818bl_info rk2818_bl_info = {
+ .pwm_id = 0,
+ .pw_pin = GPIO_HIGH | (RK2818_PIN_PF4<< 8) ,
+ .bl_ref = 0,
+ .pw_iomux = GPIOF34_UART3_SEL_NAME,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &rk2818_device_uart1,
+#ifdef CONFIG_DM9000
+ &rk2818_device_dm9k,
+#endif
+#ifdef CONFIG_I2C0_RK2818
+ &rk2818_device_i2c0,
+#endif
+#ifdef CONFIG_I2C1_RK2818
+ &rk2818_device_i2c1,
+#endif
+#ifdef CONFIG_SDMMC0_RK2818
+ &rk2818_device_sdmmc0,
+#endif
+#ifdef CONFIG_SDMMC1_RK2818
+ &rk2818_device_sdmmc1,
+#endif
+ &rk2818_device_spim,
+ &rk2818_device_i2s,
+#if defined(CONFIG_ANDROID_PMEM)
+ &rk2818_device_pmem,
+ &rk2818_device_pmem_dsp,
+#endif
+ &rk2818_device_adc,
+ &rk2818_device_adckey,
+ &rk2818_device_battery,
+ &rk2818_device_fb,
+ &rk2818_device_backlight,
+ &rk2818_device_dsp,
+#ifdef CONFIG_MTD_NAND_RK2818
+ &rk2818_nand_device,
+#endif
+#ifdef CONFIG_DWC_OTG
+ &rk2818_device_dwc_otg,
+#endif
+#ifdef CONFIG_RK2818_HOST11
+ &rk2818_device_host11,
+#endif
+#ifdef CONFIG_USB_ANDROID
+ &android_usb_device,
+ &usb_mass_storage_device,
+#endif
+
+};
+
+extern struct sys_timer rk2818_timer;
+#define POWER_PIN RK2818_PIN_PH7
+static void rk2818_power_on(void)
+{
+ int ret;
+ ret = gpio_request(POWER_PIN, NULL);
+ if (ret) {
+ printk("failed to request power_off gpio\n");
+ goto err_free_gpio;
+ }
+
+ gpio_pull_updown(POWER_PIN, GPIOPullUp);
+ ret = gpio_direction_output(POWER_PIN, GPIO_HIGH);
+ if (ret) {
+ printk("failed to set power_off gpio output\n");
+ goto err_free_gpio;
+ }
+
+ gpio_set_value(POWER_PIN, 1);/*power on*/
+
+err_free_gpio:
+ gpio_free(POWER_PIN);
+}
+
+static void rk2818_power_off(void)
+{
+ printk("shut down system now ...\n");
+ gpio_set_value(POWER_PIN, 0);/*power down*/
+}
+
+void lcd_set_iomux(u8 enable)
+{
+ int ret=-1;
+
+ if(enable)
+ {
+ rk2818_mux_api_set(CXGPIO_HSADC_SEL_NAME, 0);
+ ret = gpio_request(RK2818_PIN_PA4, NULL);
+ if(0)//(ret != 0)
+ {
+ gpio_free(RK2818_PIN_PA4);
+ printk(">>>>>> lcd cs gpio_request err \n ");
+ goto pin_err;
+ }
+
+ rk2818_mux_api_set(GPIOE_U1IR_I2C1_NAME, 0);
+
+ ret = gpio_request(RK2818_PIN_PE7, NULL);
+ if(0)//(ret != 0)
+ {
+ gpio_free(RK2818_PIN_PE7);
+ printk(">>>>>> lcd clk gpio_request err \n ");
+ goto pin_err;
+ }
+
+ ret = gpio_request(RK2818_PIN_PE6, NULL);
+ if(0)//(ret != 0)
+ {
+ gpio_free(RK2818_PIN_PE6);
+ printk(">>>>>> lcd txd gpio_request err \n ");
+ goto pin_err;
+ }
+ }
+ else
+ {
+ gpio_free(RK2818_PIN_PA4);
+ //rk2818_mux_api_set(CXGPIO_HSADC_SEL_NAME, 1);
+ rk2818_mux_api_mode_resume(CXGPIO_HSADC_SEL_NAME);
+
+ gpio_free(RK2818_PIN_PE7);
+ gpio_free(RK2818_PIN_PE6);
+ //rk2818_mux_api_set(GPIOE_U1IR_I2C1_NAME, 2);
+ rk2818_mux_api_mode_resume(GPIOE_U1IR_I2C1_NAME);
+ }
+ return ;
+pin_err:
+ return ;
+
+}
+
+struct lcd_td043mgea1_data lcd_td043mgea1 = {
+ .pin_txd = RK2818_PIN_PE6,
+ .pin_clk = RK2818_PIN_PE7,
+ .pin_cs = RK2818_PIN_PA4,
+ .screen_set_iomux = lcd_set_iomux,
+};
+
+// adc ---> key
+static ADC_keyst gAdcValueTab[] =
+{
+ {95, AD2KEY1},///VOLUME_DOWN
+ {249, AD2KEY2},///VOLUME_UP
+ {408, AD2KEY3},///MENU
+ {560, AD2KEY4},///HOME
+ {725, AD2KEY5},///BACK
+ {816, AD2KEY6},///CALL
+ {0,0}
+};
+
+static unsigned char gInitKeyCode[] =
+{
+ AD2KEY1,AD2KEY2,AD2KEY3,AD2KEY4,AD2KEY5,AD2KEY6,
+ ENDCALL,KEYSTART,KEY_WAKEUP,
+};
+
+struct adc_key_data rk2818_adc_key = {
+ .pin_playon = RK2818_PIN_PA3,
+ .playon_level = 1,
+ .adc_empty = 900,
+ .adc_invalid = 20,
+ .adc_drift = 50,
+ .adc_chn = 1,
+ .adc_key_table = gAdcValueTab,
+ .initKeyCode = gInitKeyCode,
+ .adc_key_cnt = 9,
+};
+
+static void __init machine_rk2818_init_irq(void)
+{
+ rk2818_init_irq();
+ rk2818_gpio_init(rk2818_gpioBank, 8);
+ rk2818_gpio_irq_setup();
+}
+
+static void __init machine_rk2818_board_init(void)
+{
+ rk2818_power_on();
+ pm_power_off = rk2818_power_off;
+#ifdef CONFIG_I2C0_RK2818
+ i2c_register_board_info(default_i2c0_data.bus_num, board_i2c0_devices,
+ ARRAY_SIZE(board_i2c0_devices));
+#endif
+#ifdef CONFIG_I2C1_RK2818
+ i2c_register_board_info(default_i2c1_data.bus_num, board_i2c1_devices,
+ ARRAY_SIZE(board_i2c1_devices));
+#endif
+#ifdef CONFIG_SPI_I2C
+ i2c_register_board_info(default_i2c2_data.bus_num, board_i2c2_devices,
+ ARRAY_SIZE(board_i2c2_devices));
+ i2c_register_board_info(default_i2c3_data.bus_num, board_i2c3_devices,
+ ARRAY_SIZE(board_i2c3_devices));
+#endif
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ spi_register_board_info(board_spi_devices, ARRAY_SIZE(board_spi_devices));
+ rk2818_mux_api_set(GPIOB4_SPI0CS0_MMC0D4_NAME,IOMUXA_GPIO0_B4); //IOMUXA_SPI0_CSN0);//use for gpio SPI CS0
+ rk2818_mux_api_set(GPIOB0_SPI0CSN1_MMC1PCA_NAME,IOMUXA_GPIO0_B0); //IOMUXA_SPI0_CSN1);//use for gpio SPI CS1
+ rk2818_mux_api_set(GPIOB_SPI0_MMC0_NAME,IOMUXA_SPI0);//use for SPI CLK SDI SDO
+}
+
+static void __init machine_rk2818_mapio(void)
+{
+ iotable_init(rk2818_io_desc, ARRAY_SIZE(rk2818_io_desc));
+ rk2818_clock_init();
+ rk2818_iomux_init();
+}
+
+MACHINE_START(RK2818, "RK28board")
+
+/* UART for LL DEBUG */
+ .phys_io = 0x18002000,
+ .io_pg_offst = ((0xFF100000) >> 18) & 0xfffc,
+ .boot_params = RK2818_SDRAM_PHYS + 0x88000,
+ .map_io = machine_rk2818_mapio,
+ .init_irq = machine_rk2818_init_irq,
+ .init_machine = machine_rk2818_board_init,
+ .timer = &rk2818_timer,
+MACHINE_END
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff