R600/SI: Remove dead code and add missing tests.

This probably was killed by some generic DAGCombiner
improvements in checking the TargetBooleanContents instead
of just 1.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213471 91177308-0d34-0410-b5e6-96231b3b80d8

diff --git a/lib/Target/R600/SIISelLowering.cpp b/lib/Target/R600/SIISelLowering.cpp
index 86997c82ebefe7b2493e7f8aa5ba26bd290d94be..e6c1614eb2766a43050baf2f3140232ea74b1815 100644 (file)
--- a/lib/Target/R600/SIISelLowering.cpp
+++ b/lib/Target/R600/SIISelLowering.cpp
@@ -1241,20 +1241,6 @@ SDValue SITargetLowering::PerformDAGCombine(SDNode *N,
 
   switch (N->getOpcode()) {
     default: return AMDGPUTargetLowering::PerformDAGCombine(N, DCI);
-    case ISD::SELECT_CC: {
-      ConstantSDNode *True, *False;
-      // i1 selectcc(l, r, -1, 0, cc) -> i1 setcc(l, r, cc)
-      if ((True = dyn_cast<ConstantSDNode>(N->getOperand(2)))
-          && (False = dyn_cast<ConstantSDNode>(N->getOperand(3)))
-          && True->isAllOnesValue()
-          && False->isNullValue()
-          && VT == MVT::i1) {
-        return DAG.getNode(ISD::SETCC, DL, VT, N->getOperand(0),
-                           N->getOperand(1), N->getOperand(4));
-
-      }
-      break;
-    }
     case ISD::SETCC: {
       SDValue Arg0 = N->getOperand(0);
       SDValue Arg1 = N->getOperand(1);

diff --git a/test/CodeGen/R600/selectcc-opt.ll b/test/CodeGen/R600/selectcc-opt.ll
index 834c03069522da987664e9974c85f99173e9f2ec..bdb6867850bad8ce4aeeefd02b8c11b23c5ab759 100644 (file)
--- a/test/CodeGen/R600/selectcc-opt.ll
+++ b/test/CodeGen/R600/selectcc-opt.ll
@@ -1,8 +1,10 @@
-; RUN: llc < %s -march=r600 -mcpu=redwood | FileCheck %s
+; RUN: llc -march=r600 -mcpu=SI < %s | FileCheck -check-prefix=SI -check-prefix=FUNC %s
+; RUN: llc -march=r600 -mcpu=redwood < %s | FileCheck -check-prefix=EG -check-prefix=FUNC %s
 
-; CHECK: @test_a
-; CHECK-NOT: CND
-; CHECK: SET{{[NEQGTL]+}}_DX10
+
+; FUNC-LABEL: @test_a
+; EG-NOT: CND
+; EG: SET{{[NEQGTL]+}}_DX10
 
 define void @test_a(i32 addrspace(1)* %out, float %in) {
 entry:
@@ -28,10 +30,10 @@ ENDIF:
 ; Same as test_a, but the branch labels are swapped to produce the inverse cc
 ; for the icmp instruction
 
-; CHECK: @test_b
-; CHECK: SET{{[GTEQN]+}}_DX10
-; CHECK-NEXT: PRED_
-; CHECK-NEXT: ALU clause starting
+; EG-LABEL: @test_b
+; EG: SET{{[GTEQN]+}}_DX10
+; EG-NEXT: PRED_
+; EG-NEXT: ALU clause starting
 define void @test_b(i32 addrspace(1)* %out, float %in) {
 entry:
   %0 = fcmp olt float %in, 0.0
@@ -54,8 +56,8 @@ ENDIF:
 }
 
 ; Test a CND*_INT instruction with float true/false values
-; CHECK: @test_c
-; CHECK: CND{{[GTE]+}}_INT
+; EG-LABEL: @test_c
+; EG: CND{{[GTE]+}}_INT
 define void @test_c(float addrspace(1)* %out, i32 %in) {
 entry:
   %0 = icmp sgt i32 %in, 0
@@ -63,3 +65,15 @@ entry:
   store float %1, float addrspace(1)* %out
   ret void
 }
+
+; FUNC-LABEL: @selectcc_bool
+; SI: V_CMP_NE_I32
+; SI-NEXT: V_CNDMASK_B32_e64
+; SI-NOT: CMP
+; SI-NOT: CNDMASK
+define void @selectcc_bool(i32 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
+  %icmp0 = icmp ne i32 %a, %b
+  %ext = select i1 %icmp0, i32 -1, i32 0
+  store i32 %ext, i32 addrspace(1)* %out
+  ret void
+}

diff --git a/test/CodeGen/R600/setcc-opt.ll b/test/CodeGen/R600/setcc-opt.ll
new file mode 100644 (file)
index 0000000..8e831e4
--- /dev/null
+++ b/test/CodeGen/R600/setcc-opt.ll
@@ -0,0 +1,15 @@
+; RUN: llc -march=r600 -mcpu=SI -verify-machineinstrs < %s | FileCheck -check-prefix=SI -check-prefix=FUNC %s
+
+; SI-LABEL: @sext_bool_icmp_ne
+; SI: V_CMP_NE_I32
+; SI-NEXT: V_CNDMASK_B32
+; SI-NOT: V_CMP_NE_I32
+; SI-NOT: V_CNDMASK_B32
+; SI: S_ENDPGM
+define void @sext_bool_icmp_ne(i1 addrspace(1)* %out, i32 %a, i32 %b) nounwind {
+  %icmp0 = icmp ne i32 %a, %b
+  %ext = sext i1 %icmp0 to i32
+  %icmp1 = icmp ne i32 %ext, 0
+  store i1 %icmp1, i1 addrspace(1)* %out
+  ret void
+}