ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file.
authorEnric Balletbo i Serra <eballetbo@iseebcn.com>
Thu, 6 Nov 2014 12:01:48 +0000 (13:01 +0100)
committerTony Lindgren <tony@atomide.com>
Wed, 12 Nov 2014 15:04:37 +0000 (07:04 -0800)
Use the omap3-igep0020-common.dtsi file and remove repeated parts leaving
the nodes that are not common between IGEPv2 hardware revisions.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/omap3-igep0020-common.dtsi [new file with mode: 0644]
arch/arm/boot/dts/omap3-igep0020.dts

diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
new file mode 100644 (file)
index 0000000..e458c21
--- /dev/null
@@ -0,0 +1,246 @@
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+       leds {
+               pinctrl-names = "default";
+               pinctrl-0 = <&leds_pins>;
+               compatible = "gpio-leds";
+
+               boot {
+                        label = "omap3:green:boot";
+                        gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+                        default-state = "on";
+               };
+
+               user0 {
+                        label = "omap3:red:user0";
+                        gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+                        default-state = "off";
+               };
+
+               user1 {
+                        label = "omap3:red:user1";
+                        gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+                        default-state = "off";
+               };
+
+               user2 {
+                       label = "omap3:green:user1";
+                       gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       /* HS USB Port 1 Power */
+       hsusb1_power: hsusb1_power_reg {
+               compatible = "regulator-fixed";
+               regulator-name = "hsusb1_vbus";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;  /* GPIO LEDA */
+               startup-delay-us = <70000>;
+       };
+
+       /* HS USB Host PHY on PORT 1 */
+       hsusb1_phy: hsusb1_phy {
+               compatible = "usb-nop-xceiv";
+               reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+               vcc-supply = <&hsusb1_power>;
+       };
+
+       tfp410: encoder@0 {
+               compatible = "ti,tfp410";
+               powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               tfp410_in: endpoint@0 {
+                                       remote-endpoint = <&dpi_out>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               tfp410_out: endpoint@0 {
+                                       remote-endpoint = <&dvi_connector_in>;
+                               };
+                       };
+               };
+       };
+
+       dvi0: connector@0 {
+               compatible = "dvi-connector";
+               label = "dvi";
+
+               digital;
+
+               ddc-i2c-bus = <&i2c3>;
+
+               port {
+                       dvi_connector_in: endpoint {
+                               remote-endpoint = <&tfp410_out>;
+                       };
+               };
+       };
+};
+
+&omap3_pmx_core {
+       pinctrl-names = "default";
+       pinctrl-0 = <
+               &tfp410_pins
+               &dss_dpi_pins
+       >;
+
+       tfp410_pins: pinmux_tfp410_pins {
+               pinctrl-single,pins = <
+                       0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+               >;
+       };
+
+       dss_dpi_pins: pinmux_dss_dpi_pins {
+               pinctrl-single,pins = <
+                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+               >;
+       };
+
+       uart2_pins: pinmux_uart2_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)        /* uart2_cts.uart2_cts */
+                       OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)       /* uart2_rts .uart2_rts*/
+                       OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)       /* uart2_tx.uart2_tx */
+                       OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)        /* uart2_rx.uart2_rx */
+               >;
+       };
+};
+
+&omap3_pmx_core2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <
+               &hsusbb1_pins
+       >;
+
+       hsusbb1_pins: pinmux_hsusbb1_pins {
+               pinctrl-single,pins = <
+                       OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)            /* etk_ctl.hsusb1_clk */
+                       OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)            /* etk_clk.hsusb1_stp */
+                       OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d8.hsusb1_dir */
+                       OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d9.hsusb1_nxt */
+                       OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d0.hsusb1_data0 */
+                       OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d1.hsusb1_data1 */
+                       OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d2.hsusb1_data2 */
+                       OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d3.hsusb1_data7 */
+                       OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d4.hsusb1_data4 */
+                       OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d5.hsusb1_data5 */
+                       OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d6.hsusb1_data6 */
+                       OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d7.hsusb1_data3 */
+               >;
+       };
+
+       leds_pins: pinmux_leds_pins {
+               pinctrl-single,pins = <
+                       OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+                       OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+                       OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+               >;
+       };
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+
+       /*
+        * Display monitor features are burnt in the EEPROM
+        * as EDID data.
+        */
+       eeprom@50 {
+               compatible = "ti,eeprom";
+               reg = <0x50>;
+       };
+};
+
+&gpmc {
+       ranges = <0 0 0x00000000 0x20000000>,
+                <5 0 0x2c000000 0x01000000>;
+
+       ethernet@gpmc {
+               pinctrl-names = "default";
+               pinctrl-0 = <&smsc9221_pins>;
+               reg = <5 0 0xff>;
+               interrupt-parent = <&gpio6>;
+               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+       port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+       phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+       /* Needed for DSS */
+       regulator-name = "vdds_dsi";
+};
+
+&dss {
+       status = "ok";
+
+       port {
+               dpi_out: endpoint {
+                       remote-endpoint = <&tfp410_in>;
+                       data-lines = <24>;
+               };
+       };
+};
index 0d82f0993214ead8567639d10159fb910f9b4014..fea7f7edb45dcb2fc4b8145ce9432b4c048f3c50 100644 (file)
@@ -9,42 +9,12 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
+#include "omap3-igep0020-common.dtsi"
 
 / {
        model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
        compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
-       leds {
-               pinctrl-names = "default";
-               pinctrl-0 = <&leds_pins>;
-               compatible = "gpio-leds";
-
-               boot {
-                        label = "omap3:green:boot";
-                        gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-                        default-state = "on";
-               };
-
-               user0 {
-                        label = "omap3:red:user0";
-                        gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-                        default-state = "off";
-               };
-
-               user1 {
-                        label = "omap3:red:user1";
-                        gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-                        default-state = "off";
-               };
-
-               user2 {
-                       label = "omap3:green:user1";
-                       gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
-               };
-       };
-
        /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
        lbee1usjyc_pdn: lbee1usjyc_pdn {
                compatible = "regulator-fixed";
                gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;    /* gpio_139 - RESET_N_W */
                enable-active-high;
        };
-
-       /* HS USB Port 1 Power */
-       hsusb1_power: hsusb1_power_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "hsusb1_vbus";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;  /* GPIO LEDA */
-               startup-delay-us = <70000>;
-       };
-
-       /* HS USB Host PHY on PORT 1 */
-       hsusb1_phy: hsusb1_phy {
-               compatible = "usb-nop-xceiv";
-               reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
-               vcc-supply = <&hsusb1_power>;
-       };
-
-       tfp410: encoder@0 {
-               compatible = "ti,tfp410";
-               powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-
-                               tfp410_in: endpoint@0 {
-                                       remote-endpoint = <&dpi_out>;
-                               };
-                       };
-
-                       port@1 {
-                               reg = <1>;
-
-                               tfp410_out: endpoint@0 {
-                                       remote-endpoint = <&dvi_connector_in>;
-                               };
-                       };
-               };
-       };
-
-       dvi0: connector@0 {
-               compatible = "dvi-connector";
-               label = "dvi";
-
-               digital;
-
-               ddc-i2c-bus = <&i2c3>;
-
-               port {
-                       dvi_connector_in: endpoint {
-                               remote-endpoint = <&tfp410_out>;
-                       };
-               };
-       };
 };
 
 &omap3_pmx_core {
-       pinctrl-names = "default";
-       pinctrl-0 = <
-               &tfp410_pins
-               &dss_dpi_pins
-       >;
-
-       tfp410_pins: pinmux_tfp410_pins {
-               pinctrl-single,pins = <
-                       0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
-               >;
-       };
-
-       dss_dpi_pins: pinmux_dss_dpi_pins {
-               pinctrl-single,pins = <
-                       0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-                       0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-                       0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-                       0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-                       0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-                       0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-                       0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-                       0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-                       0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-                       0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-                       0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-                       0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-                       0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-                       0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-                       0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-                       0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-                       0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-                       0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-                       0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-                       0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-                       0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-                       0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-                       0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-                       0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-                       0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-                       0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-                       0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-                       0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
-               >;
-       };
-
        lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)       /* sdmmc2_dat5.gpio_137 - RESET_N_W */
        };
 };
 
-&omap3_pmx_core2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <
-               &hsusbb1_pins
-       >;
-
-       hsusbb1_pins: pinmux_hsusbb1_pins {
-               pinctrl-single,pins = <
-                       OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)            /* etk_ctl.hsusb1_clk */
-                       OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)            /* etk_clk.hsusb1_stp */
-                       OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d8.hsusb1_dir */
-                       OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d9.hsusb1_nxt */
-                       OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d0.hsusb1_data0 */
-                       OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d1.hsusb1_data1 */
-                       OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d2.hsusb1_data2 */
-                       OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d3.hsusb1_data7 */
-                       OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d4.hsusb1_data4 */
-                       OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d5.hsusb1_data5 */
-                       OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d6.hsusb1_data6 */
-                       OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d7.hsusb1_data3 */
-               >;
-       };
-
-       leds_pins: pinmux_leds_pins {
-               pinctrl-single,pins = <
-                       OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
-                       OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
-                       OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
-               >;
-       };
-};
-
-&i2c3 {
-       clock-frequency = <100000>;
-
-       /*
-        * Display monitor features are burnt in the EEPROM
-        * as EDID data.
-        */
-       eeprom@50 {
-               compatible = "ti,eeprom";
-               reg = <0x50>;
-       };
-};
-
-&gpmc {
-       ranges = <0 0 0x00000000 0x1000000>,    /* CS0: 16MB for NAND */
-                <5 0 0x2c000000 0x01000000>;
-
-       ethernet@gpmc {
-               pinctrl-names = "default";
-               pinctrl-0 = <&smsc9221_pins>;
-               reg = <5 0 0xff>;
-               interrupt-parent = <&gpio6>;
-               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-       };
-};
-
 /* On board Wifi module */
 &mmc2 {
        pinctrl-names = "default";
        bus-width = <4>;
        non-removable;
 };
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart2_pins>;
-};
-
-&usbhshost {
-       port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
-       phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
-        /* Needed for DSS */
-        regulator-name = "vdds_dsi";
-};
-
-&dss {
-       status = "ok";
-
-       port {
-               dpi_out: endpoint {
-                       remote-endpoint = <&tfp410_in>;
-                       data-lines = <24>;
-               };
-       };
-};