powerpc/fsl-booke: Add device tree support for T1024/T1023 SoC
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Wed, 15 Apr 2015 03:48:08 +0000 (11:48 +0800)
committerScott Wood <scottwood@freescale.com>
Wed, 3 Jun 2015 02:37:20 +0000 (21:37 -0500)
The T1024 SoC includes the following function and features:
- Two 64-bit Power architecture e5500 cores, up to 1.4GHz
- private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC)
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI)
- High-speed peripheral interfaces
  - Three PCI Express 2.0 controllers
- Additional peripheral interfaces
  - One SATA 2.0 controller
  - Two USB 2.0 controllers with integrated PHY
  - Enhanced secure digital host controller (SD/eSDHC/eMMC)
  - Enhanced serial peripheral interface (eSPI)
  - Four I2C controllers
  - Four 2-pin UARTs or two 4-pin UARTs
  - Integrated Flash Controller supporting NAND and NOR flash
- Two 8-channel DMA engines
- Multicore programmable interrupt controller (PIC)
- LCD interface (DIU) with 12 bit dual data rate
- QUICC Engine block supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[scottwood@freescale.com: whitespace fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t1024si-post.dtsi [new file with mode: 0644]
arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi [new file with mode: 0644]

diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
new file mode 100644 (file)
index 0000000..dbe6578
--- /dev/null
@@ -0,0 +1,330 @@
+/*
+ * T1023 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+       #address-cells = <2>;
+       #size-cells = <1>;
+       compatible = "fsl,ifc", "simple-bus";
+       interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+       compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <20 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <20 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 40 1 0 0
+                       0000 0 0 2 &mpic 1 1 0 0
+                       0000 0 0 3 &mpic 2 1 0 0
+                       0000 0 0 4 &mpic 3 1 0 0
+                       >;
+       };
+};
+
+&pci1 {
+       compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0 0xff>;
+       interrupts = <21 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <21 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 41 1 0 0
+                       0000 0 0 2 &mpic 5 1 0 0
+                       0000 0 0 3 &mpic 6 1 0 0
+                       0000 0 0 4 &mpic 7 1 0 0
+                       >;
+       };
+};
+
+&pci2 {
+       compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+       device_type = "pci";
+       #size-cells = <2>;
+       #address-cells = <3>;
+       bus-range = <0x0 0xff>;
+       interrupts = <22 2 0 0>;
+       fsl,iommu-parent = <&pamu0>;
+       pcie@0 {
+               reg = <0 0 0 0 0>;
+               #interrupt-cells = <1>;
+               #size-cells = <2>;
+               #address-cells = <3>;
+               device_type = "pci";
+               interrupts = <22 2 0 0>;
+               interrupt-map-mask = <0xf800 0 0 7>;
+               interrupt-map = <
+                       /* IDSEL 0x0 */
+                       0000 0 0 1 &mpic 42 1 0 0
+                       0000 0 0 2 &mpic 9 1 0 0
+                       0000 0 0 3 &mpic 10 1 0 0
+                       0000 0 0 4 &mpic 11 1 0 0
+                       >;
+       };
+};
+
+&dcsr {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "fsl,dcsr", "simple-bus";
+
+       dcsr-epu@0 {
+               compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
+               interrupts = <52 2 0 0
+                             84 2 0 0
+                             85 2 0 0>;
+               reg = <0x0 0x1000>;
+       };
+       dcsr-npc {
+               compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
+               reg = <0x1000 0x1000 0x1002000 0x10000>;
+       };
+       dcsr-nxc@2000 {
+               compatible = "fsl,dcsr-nxc";
+               reg = <0x2000 0x1000>;
+       };
+       dcsr-corenet {
+               compatible = "fsl,dcsr-corenet";
+               reg = <0x8000 0x1000 0x1A000 0x1000>;
+       };
+       dcsr-ocn@11000 {
+               compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
+               reg = <0x11000 0x1000>;
+       };
+       dcsr-ddr@12000 {
+               compatible = "fsl,dcsr-ddr";
+               dev-handle = <&ddr1>;
+               reg = <0x12000 0x1000>;
+       };
+       dcsr-nal@18000 {
+               compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
+               reg = <0x18000 0x1000>;
+       };
+       dcsr-rcpm@22000 {
+               compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
+               reg = <0x22000 0x1000>;
+       };
+       dcsr-snpc@30000 {
+               compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x30000 0x1000 0x1022000 0x10000>;
+       };
+       dcsr-snpc@31000 {
+               compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
+               reg = <0x31000 0x1000 0x1042000 0x10000>;
+       };
+       dcsr-cpu-sb-proxy@100000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu0>;
+               reg = <0x100000 0x1000 0x101000 0x1000>;
+       };
+       dcsr-cpu-sb-proxy@108000 {
+               compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+               cpu-handle = <&cpu1>;
+               reg = <0x108000 0x1000 0x109000 0x1000>;
+       };
+};
+
+&soc {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       device_type = "soc";
+       compatible = "simple-bus";
+
+       soc-sram-error {
+               compatible = "fsl,soc-sram-error";
+               interrupts = <16 2 1 29>;
+       };
+
+       corenet-law@0 {
+               compatible = "fsl,corenet-law";
+               reg = <0x0 0x1000>;
+               fsl,num-laws = <16>;
+       };
+
+       ddr1: memory-controller@8000 {
+               compatible = "fsl,qoriq-memory-controller-v5.0",
+                               "fsl,qoriq-memory-controller";
+               reg = <0x8000 0x1000>;
+               interrupts = <16 2 1 23>;
+       };
+
+       cpc: l3-cache-controller@10000 {
+               compatible = "fsl,t1023-l3-cache-controller", "cache";
+               reg = <0x10000 0x1000>;
+               interrupts = <16 2 1 27>;
+       };
+
+       corenet-cf@18000 {
+               compatible = "fsl,corenet2-cf";
+               reg = <0x18000 0x1000>;
+               interrupts = <16 2 1 31>;
+       };
+
+       iommu@20000 {
+               compatible = "fsl,pamu-v1.0", "fsl,pamu";
+               reg = <0x20000 0x1000>;
+               ranges = <0 0x20000 0x1000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               interrupts = <
+                       24 2 0 0
+                       16 2 1 30>;
+               pamu0: pamu@0 {
+                       reg = <0 0x1000>;
+                       fsl,primary-cache-geometry = <128 1>;
+                       fsl,secondary-cache-geometry = <32 2>;
+               };
+       };
+
+/include/ "qoriq-mpic.dtsi"
+
+       guts: global-utilities@e0000 {
+               compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
+               reg = <0xe0000 0xe00>;
+               fsl,has-rstcr;
+               fsl,liodn-bits = <12>;
+       };
+
+/include/ "qoriq-clockgen2.dtsi"
+       global-utilities@e1000 {
+               compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
+               mux0: mux0@0 {
+                       #clock-cells = <0>;
+                       reg = <0x0 4>;
+                       compatible = "fsl,core-mux-clock";
+                       clocks = <&pll0 0>, <&pll0 1>;
+                       clock-names = "pll0_0", "pll0_1";
+                       clock-output-names = "cmux0";
+               };
+               mux1: mux1@20 {
+                       #clock-cells = <0>;
+                       reg = <0x20 4>;
+                       compatible = "fsl,core-mux-clock";
+                       clocks = <&pll0 0>, <&pll0 1>;
+                       clock-names = "pll0_0", "pll0_1";
+                       clock-output-names = "cmux1";
+               };
+       };
+
+       rcpm: global-utilities@e2000 {
+               compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
+               reg = <0xe2000 0x1000>;
+       };
+
+       sfp: sfp@e8000 {
+               compatible = "fsl,t1023-sfp";
+               reg = <0xe8000 0x1000>;
+       };
+
+       serdes: serdes@ea000 {
+               compatible = "fsl,t1023-serdes";
+               reg = <0xea000 0x4000>;
+       };
+
+       scfg: global-utilities@fc000 {
+               compatible = "fsl,t1023-scfg";
+               reg = <0xfc000 0x1000>;
+       };
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+
+/include/ "qoriq-espi-0.dtsi"
+       spi@110000 {
+               fsl,espi-num-chipselects = <4>;
+       };
+
+/include/ "qoriq-esdhc-0.dtsi"
+       sdhc@114000 {
+               compatible = "fsl,t1023-esdhc", "fsl,esdhc";
+               fsl,iommu-parent = <&pamu0>;
+               fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+               sdhci,auto-cmd12;
+               no-1-8-v;
+       };
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+               usb0: usb@210000 {
+                       compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
+                       fsl,iommu-parent = <&pamu0>;
+                       fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+                       phy_type = "utmi";
+                       port0;
+               };
+/include/ "qoriq-usb2-dr-0.dtsi"
+               usb1: usb@211000 {
+                       compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+                       fsl,iommu-parent = <&pamu0>;
+                       fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+                       dr_mode = "host";
+                       phy_type = "utmi";
+               };
+/include/ "qoriq-sata2-0.dtsi"
+sata@220000 {
+                       fsl,iommu-parent = <&pamu0>;
+                       fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+};
+
+/include/ "qoriq-sec5.0-0.dtsi"
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
new file mode 100644 (file)
index 0000000..95e3af8
--- /dev/null
@@ -0,0 +1,100 @@
+/*
+ * T1024 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1023si-post.dtsi"
+
+/ {
+       aliases {
+               vga = &display;
+               display = &display;
+       };
+
+       qe:qe@ffe140000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               device_type = "qe";
+               compatible = "fsl,qe";
+               ranges = <0x0 0xf 0xfe140000 0x40000>;
+               reg = <0xf 0xfe140000 0 0x480>;
+               fsl,qe-num-riscs = <1>;
+               fsl,qe-num-snums = <28>;
+               brg-frequency = <0>;
+               bus-frequency = <0>;
+       };
+};
+
+&soc {
+       display:display@180000 {
+               compatible = "fsl,t1024-diu", "fsl,diu";
+               reg = <0x180000 1000>;
+               interrupts = <74 2 0 0>;
+       };
+};
+
+&qe {
+       qeic: interrupt-controller@80 {
+               interrupt-controller;
+               compatible = "fsl,qe-ic";
+               #address-cells = <0>;
+               #interrupt-cells = <1>;
+               reg = <0x80 0x80>;
+               interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+       };
+
+       ucc@2000 {
+               cell-index = <1>;
+               reg = <0x2000 0x200>;
+               interrupts = <32>;
+               interrupt-parent = <&qeic>;
+       };
+
+       ucc@2200 {
+               cell-index = <3>;
+               reg = <0x2200 0x200>;
+               interrupts = <34>;
+               interrupt-parent = <&qeic>;
+       };
+
+       muram@10000 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "fsl,qe-muram", "fsl,cpm-muram";
+               ranges = <0x0 0x10000 0x6000>;
+
+               data-only@0 {
+                       compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
+                       reg = <0x0 0x6000>;
+               };
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
new file mode 100644 (file)
index 0000000..1f1a9f8
--- /dev/null
@@ -0,0 +1,87 @@
+/*
+ * T1024/T1023 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+       #address-cells = <2>;
+       #size-cells = <2>;
+       interrupt-parent = <&mpic>;
+
+       aliases {
+               ccsr = &soc;
+               dcsr = &dcsr;
+
+               dma0 = &dma0;
+               dma1 = &dma1;
+               serial0 = &serial0;
+               serial1 = &serial1;
+               serial2 = &serial2;
+               serial3 = &serial3;
+               pci0 = &pci0;
+               pci1 = &pci1;
+               pci2 = &pci2;
+               usb0 = &usb0;
+               usb1 = &usb1;
+               sdhc = &sdhc;
+
+               crypto = &crypto;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: PowerPC,e5500@0 {
+                       device_type = "cpu";
+                       reg = <0>;
+                       clocks = <&mux0>;
+                       next-level-cache = <&L2_1>;
+                       L2_1: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+               cpu1: PowerPC,e5500@1 {
+                       device_type = "cpu";
+                       reg = <1>;
+                       clocks = <&mux1>;
+                       next-level-cache = <&L2_2>;
+                       L2_2: l2-cache {
+                               next-level-cache = <&cpc>;
+                       };
+               };
+       };
+};