i2c-designware: Consolidate to use 32-bit word accesses
authorShinya Kuribayashi <shinya.kuribayashi@necel.com>
Fri, 6 Nov 2009 12:43:52 +0000 (21:43 +0900)
committerBen Dooks <ben-linux@fluff.org>
Wed, 9 Dec 2009 00:19:09 +0000 (00:19 +0000)
This driver looks originally meant for armel machines where readw()/
writew() works perfectly fine with this hardware.  But that doens't
work for big-endian systems.

This patch converts all 8/16-bit-aware usages to 32-bit variants.

Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
drivers/i2c/busses/i2c-designware.c

index b444762e9b9f2aef2c7ceff923338324dc9da883..a4f928e1fc5b4a33535b2a56ebc9114aeb2f08db 100644 (file)
@@ -162,14 +162,14 @@ struct dw_i2c_dev {
        struct i2c_msg          *msgs;
        int                     msgs_num;
        int                     msg_write_idx;
-       u16                     tx_buf_len;
+       u32                     tx_buf_len;
        u8                      *tx_buf;
        int                     msg_read_idx;
-       u16                     rx_buf_len;
+       u32                     rx_buf_len;
        u8                      *rx_buf;
        int                     msg_err;
        unsigned int            status;
-       u16                     abort_source;
+       u32                     abort_source;
        int                     irq;
        struct i2c_adapter      adapter;
        unsigned int            tx_fifo_depth;
@@ -187,25 +187,25 @@ struct dw_i2c_dev {
 static void i2c_dw_init(struct dw_i2c_dev *dev)
 {
        u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
-       u16 ic_con;
+       u32 ic_con;
 
        /* Disable the adapter */
-       writeb(0, dev->base + DW_IC_ENABLE);
+       writel(0, dev->base + DW_IC_ENABLE);
 
        /* set standard and fast speed deviders for high/low periods */
-       writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
+       writel((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
                        dev->base + DW_IC_SS_SCL_HCNT);
-       writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
+       writel((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
                        dev->base + DW_IC_SS_SCL_LCNT);
-       writew((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
+       writel((input_clock_khz *  6 / 10000)+1, /* fast speed high, 0.6us */
                        dev->base + DW_IC_FS_SCL_HCNT);
-       writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
+       writel((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
                        dev->base + DW_IC_FS_SCL_LCNT);
 
        /* configure the i2c master */
        ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
                DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
-       writew(ic_con, dev->base + DW_IC_CON);
+       writel(ic_con, dev->base + DW_IC_CON);
 }
 
 /*
@@ -215,7 +215,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 {
        int timeout = TIMEOUT;
 
-       while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+       while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
                if (timeout <= 0) {
                        dev_warn(dev->dev, "timeout waiting for bus ready\n");
                        return -ETIMEDOUT;
@@ -239,29 +239,29 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
        struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
        struct i2c_msg *msgs = dev->msgs;
        int num = dev->msgs_num;
-       u16 ic_con, intr_mask;
-       int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
-       int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
-       u16 addr = msgs[dev->msg_write_idx].addr;
-       u16 buf_len = dev->tx_buf_len;
+       u32 ic_con, intr_mask;
+       int tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
+       int rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+       u32 addr = msgs[dev->msg_write_idx].addr;
+       u32 buf_len = dev->tx_buf_len;
 
        if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
                /* Disable the adapter */
-               writeb(0, dev->base + DW_IC_ENABLE);
+               writel(0, dev->base + DW_IC_ENABLE);
 
                /* set the slave (target) address */
-               writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+               writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
 
                /* if the slave address is ten bit address, enable 10BITADDR */
-               ic_con = readw(dev->base + DW_IC_CON);
+               ic_con = readl(dev->base + DW_IC_CON);
                if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
                        ic_con |= DW_IC_CON_10BITADDR_MASTER;
                else
                        ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
-               writew(ic_con, dev->base + DW_IC_CON);
+               writel(ic_con, dev->base + DW_IC_CON);
 
                /* Enable the adapter */
-               writeb(1, dev->base + DW_IC_ENABLE);
+               writel(1, dev->base + DW_IC_ENABLE);
        }
 
        for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
@@ -287,10 +287,10 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
 
                while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
                        if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
-                               writew(0x100, dev->base + DW_IC_DATA_CMD);
+                               writel(0x100, dev->base + DW_IC_DATA_CMD);
                                rx_limit--;
                        } else
-                               writew(*(dev->tx_buf++),
+                               writel(*(dev->tx_buf++),
                                                dev->base + DW_IC_DATA_CMD);
                        tx_limit--; buf_len--;
                }
@@ -302,7 +302,7 @@ i2c_dw_xfer_msg(struct i2c_adapter *adap)
                dev->status |= STATUS_WRITE_IN_PROGRESS;
        } else
                dev->status &= ~STATUS_WRITE_IN_PROGRESS;
-       writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+       writel(intr_mask, dev->base + DW_IC_INTR_MASK);
 
        dev->tx_buf_len = buf_len;
 }
@@ -313,11 +313,11 @@ i2c_dw_read(struct i2c_adapter *adap)
        struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
        struct i2c_msg *msgs = dev->msgs;
        int num = dev->msgs_num;
-       u16 addr = msgs[dev->msg_read_idx].addr;
-       int rx_valid = readw(dev->base + DW_IC_RXFLR);
+       u32 addr = msgs[dev->msg_read_idx].addr;
+       int rx_valid = readl(dev->base + DW_IC_RXFLR);
 
        for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
-               u16 len;
+               u32 len;
                u8 *buf;
 
                if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
@@ -336,7 +336,7 @@ i2c_dw_read(struct i2c_adapter *adap)
                }
 
                for (; len > 0 && rx_valid > 0; len--, rx_valid--)
-                       *buf++ = readb(dev->base + DW_IC_DATA_CMD);
+                       *buf++ = readl(dev->base + DW_IC_DATA_CMD);
 
                if (len > 0) {
                        dev->status |= STATUS_READ_IN_PROGRESS;
@@ -398,7 +398,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
                do {
                        i2c_dw_read(adap);
                } while (dev->status & STATUS_READ_IN_PROGRESS);
-               writeb(0, dev->base + DW_IC_ENABLE);
+               writel(0, dev->base + DW_IC_ENABLE);
                ret = num;
                goto done;
        }
@@ -428,7 +428,7 @@ static u32 i2c_dw_func(struct i2c_adapter *adap)
 static void dw_i2c_pump_msg(unsigned long data)
 {
        struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
-       u16 intr_mask;
+       u32 intr_mask;
 
        i2c_dw_read(&dev->adapter);
        i2c_dw_xfer_msg(&dev->adapter);
@@ -436,7 +436,7 @@ static void dw_i2c_pump_msg(unsigned long data)
        intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
        if (dev->status & STATUS_WRITE_IN_PROGRESS)
                intr_mask |= DW_IC_INTR_TX_EMPTY;
-       writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+       writel(intr_mask, dev->base + DW_IC_INTR_MASK);
 }
 
 /*
@@ -446,19 +446,19 @@ static void dw_i2c_pump_msg(unsigned long data)
 static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 {
        struct dw_i2c_dev *dev = dev_id;
-       u16 stat;
+       u32 stat;
 
-       stat = readw(dev->base + DW_IC_INTR_STAT);
+       stat = readl(dev->base + DW_IC_INTR_STAT);
        dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
        if (stat & DW_IC_INTR_TX_ABRT) {
-               dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
+               dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
                dev->cmd_err |= DW_IC_ERR_TX_ABRT;
                dev->status = STATUS_IDLE;
        } else if (stat & DW_IC_INTR_TX_EMPTY)
                tasklet_schedule(&dev->pump_msg);
 
-       readb(dev->base + DW_IC_CLR_INTR);      /* clear interrupts */
-       writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
+       readl(dev->base + DW_IC_CLR_INTR);      /* clear interrupts */
+       writel(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
        if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
                complete(&dev->cmd_complete);
 
@@ -531,7 +531,7 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev)
        }
        i2c_dw_init(dev);
 
-       writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+       writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
        r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
        if (r) {
                dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
@@ -587,7 +587,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev)
        clk_put(dev->clk);
        dev->clk = NULL;
 
-       writeb(0, dev->base + DW_IC_ENABLE);
+       writel(0, dev->base + DW_IC_ENABLE);
        free_irq(dev->irq, dev);
        kfree(dev);