[PATCH] zd1211rw: Consistency for address space constants
authorDaniel Drake <dsd@gentoo.org>
Tue, 12 Dec 2006 01:25:52 +0000 (01:25 +0000)
committerJeff Garzik <jeff@garzik.org>
Mon, 5 Feb 2007 21:58:42 +0000 (16:58 -0500)
The zd1211rw address space has confused me once too many times. This
patch introduces the following naming notation:

Memory space is split into segments (cr, fw, eeprom) and segments may
contain components (e.g. boot code inside eeprom). These names are
arbitrary and only for the description below:

x_START: Absolute address of segment start
(previously these were named such as CR_BASE_OFFSET, but they weren't
really offsets unless you were considering them as an offset to 0)

x_LEN: Segment length

x_y_LEN: Length of component y of segment x

x_y_OFFSET: Relative address of component y into segment x. The absolute
address for this component is (x_START + x_y_OFFSET)

I also renamed EEPROM registers to EEPROM data. These 'registers' can't
be written to using standard I/O and really represent predefined data
from the vendor.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/zd1211rw/zd_chip.h
drivers/net/wireless/zd1211rw/zd_types.h
drivers/net/wireless/zd1211rw/zd_usb.c

index a4e3cee9b59d2f94b604f358535cc54dcb8ebe15..fa3437d6d74220f29e8224129b239cd8bd250328 100644 (file)
 /*
  * Upper 16 bit contains the regulatory domain.
  */
-#define E2P_SUBID              E2P_REG(0x00)
-#define E2P_POD                        E2P_REG(0x02)
-#define E2P_MAC_ADDR_P1                E2P_REG(0x04)
-#define E2P_MAC_ADDR_P2                E2P_REG(0x06)
-#define E2P_PWR_CAL_VALUE1     E2P_REG(0x08)
-#define E2P_PWR_CAL_VALUE2     E2P_REG(0x0a)
-#define E2P_PWR_CAL_VALUE3     E2P_REG(0x0c)
-#define E2P_PWR_CAL_VALUE4      E2P_REG(0x0e)
-#define E2P_PWR_INT_VALUE1     E2P_REG(0x10)
-#define E2P_PWR_INT_VALUE2     E2P_REG(0x12)
-#define E2P_PWR_INT_VALUE3     E2P_REG(0x14)
-#define E2P_PWR_INT_VALUE4     E2P_REG(0x16)
+#define E2P_SUBID              E2P_DATA(0x00)
+#define E2P_POD                        E2P_DATA(0x02)
+#define E2P_MAC_ADDR_P1                E2P_DATA(0x04)
+#define E2P_MAC_ADDR_P2                E2P_DATA(0x06)
+#define E2P_PWR_CAL_VALUE1     E2P_DATA(0x08)
+#define E2P_PWR_CAL_VALUE2     E2P_DATA(0x0a)
+#define E2P_PWR_CAL_VALUE3     E2P_DATA(0x0c)
+#define E2P_PWR_CAL_VALUE4      E2P_DATA(0x0e)
+#define E2P_PWR_INT_VALUE1     E2P_DATA(0x10)
+#define E2P_PWR_INT_VALUE2     E2P_DATA(0x12)
+#define E2P_PWR_INT_VALUE3     E2P_DATA(0x14)
+#define E2P_PWR_INT_VALUE4     E2P_DATA(0x16)
 
 /* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30)
  * also only 11 channels. */
-#define E2P_ALLOWED_CHANNEL    E2P_REG(0x18)
-
-#define E2P_PHY_REG            E2P_REG(0x1a)
-#define E2P_DEVICE_VER         E2P_REG(0x20)
-#define E2P_36M_CAL_VALUE1     E2P_REG(0x28)
-#define E2P_36M_CAL_VALUE2      E2P_REG(0x2a)
-#define E2P_36M_CAL_VALUE3      E2P_REG(0x2c)
-#define E2P_36M_CAL_VALUE4     E2P_REG(0x2e)
-#define E2P_11A_INT_VALUE1     E2P_REG(0x30)
-#define E2P_11A_INT_VALUE2     E2P_REG(0x32)
-#define E2P_11A_INT_VALUE3     E2P_REG(0x34)
-#define E2P_11A_INT_VALUE4     E2P_REG(0x36)
-#define E2P_48M_CAL_VALUE1     E2P_REG(0x38)
-#define E2P_48M_CAL_VALUE2     E2P_REG(0x3a)
-#define E2P_48M_CAL_VALUE3     E2P_REG(0x3c)
-#define E2P_48M_CAL_VALUE4     E2P_REG(0x3e)
-#define E2P_48M_INT_VALUE1     E2P_REG(0x40)
-#define E2P_48M_INT_VALUE2     E2P_REG(0x42)
-#define E2P_48M_INT_VALUE3     E2P_REG(0x44)
-#define E2P_48M_INT_VALUE4     E2P_REG(0x46)
-#define E2P_54M_CAL_VALUE1     E2P_REG(0x48)   /* ??? */
-#define E2P_54M_CAL_VALUE2     E2P_REG(0x4a)
-#define E2P_54M_CAL_VALUE3     E2P_REG(0x4c)
-#define E2P_54M_CAL_VALUE4     E2P_REG(0x4e)
-#define E2P_54M_INT_VALUE1     E2P_REG(0x50)
-#define E2P_54M_INT_VALUE2     E2P_REG(0x52)
-#define E2P_54M_INT_VALUE3     E2P_REG(0x54)
-#define E2P_54M_INT_VALUE4     E2P_REG(0x56)
+#define E2P_ALLOWED_CHANNEL    E2P_DATA(0x18)
+
+#define E2P_PHY_REG            E2P_DATA(0x1a)
+#define E2P_DEVICE_VER         E2P_DATA(0x20)
+#define E2P_36M_CAL_VALUE1     E2P_DATA(0x28)
+#define E2P_36M_CAL_VALUE2      E2P_DATA(0x2a)
+#define E2P_36M_CAL_VALUE3      E2P_DATA(0x2c)
+#define E2P_36M_CAL_VALUE4     E2P_DATA(0x2e)
+#define E2P_11A_INT_VALUE1     E2P_DATA(0x30)
+#define E2P_11A_INT_VALUE2     E2P_DATA(0x32)
+#define E2P_11A_INT_VALUE3     E2P_DATA(0x34)
+#define E2P_11A_INT_VALUE4     E2P_DATA(0x36)
+#define E2P_48M_CAL_VALUE1     E2P_DATA(0x38)
+#define E2P_48M_CAL_VALUE2     E2P_DATA(0x3a)
+#define E2P_48M_CAL_VALUE3     E2P_DATA(0x3c)
+#define E2P_48M_CAL_VALUE4     E2P_DATA(0x3e)
+#define E2P_48M_INT_VALUE1     E2P_DATA(0x40)
+#define E2P_48M_INT_VALUE2     E2P_DATA(0x42)
+#define E2P_48M_INT_VALUE3     E2P_DATA(0x44)
+#define E2P_48M_INT_VALUE4     E2P_DATA(0x46)
+#define E2P_54M_CAL_VALUE1     E2P_DATA(0x48)  /* ??? */
+#define E2P_54M_CAL_VALUE2     E2P_DATA(0x4a)
+#define E2P_54M_CAL_VALUE3     E2P_DATA(0x4c)
+#define E2P_54M_CAL_VALUE4     E2P_DATA(0x4e)
+#define E2P_54M_INT_VALUE1     E2P_DATA(0x50)
+#define E2P_54M_INT_VALUE2     E2P_DATA(0x52)
+#define E2P_54M_INT_VALUE3     E2P_DATA(0x54)
+#define E2P_54M_INT_VALUE4     E2P_DATA(0x56)
 
 /* All 16 bit values */
 #define FW_FIRMWARE_VER         FW_REG(0)
 /* 0x2 - link led on? */
 
 enum {
-       CR_BASE_OFFSET                  = 0x9000,
-       FW_START_OFFSET                 = 0xee00,
-       FW_BASE_ADDR_OFFSET             = FW_START_OFFSET + 0x1d,
-       EEPROM_START_OFFSET             = 0xf800,
-       EEPROM_SIZE                     = 0x800, /* words */
-       LOAD_CODE_SIZE                  = 0xe, /* words */
-       LOAD_VECT_SIZE                  = 0x10000 - 0xfff7, /* words */
-       EEPROM_REGS_OFFSET              = LOAD_CODE_SIZE + LOAD_VECT_SIZE,
-       EEPROM_REGS_SIZE                = 0x7e, /* words */
-       E2P_BASE_OFFSET                 = EEPROM_START_OFFSET +
-                                         EEPROM_REGS_OFFSET,
-};
+       /* CONTROL REGISTERS */
+       CR_START                        = 0x9000,
+
+       /* FIRMWARE */
+       FW_START                        = 0xee00,
+
+       /* The word at this offset contains the base address of the FW_REG
+        * registers */
+       FW_REGS_ADDR_OFFSET             = 0x1d,
+
 
-#define FW_REG_TABLE_ADDR      USB_ADDR(FW_START_OFFSET + 0x1d)
+       /* EEPROM */
+       E2P_START                       = 0xf800,
+       E2P_LEN                         = 0x800,
+
+       /* EEPROM layout */
+       E2P_LOAD_CODE_LEN               = 0xe,          /* base 0xf800 */
+       E2P_LOAD_VECT_LEN               = 0x9,          /* base 0xf80e */
+       /* E2P_DATA indexes into this */
+       E2P_DATA_LEN                    = 0x7e,         /* base 0xf817 */
+       E2P_BOOT_CODE_LEN               = 0x760,        /* base 0xf895 */
+       E2P_INTR_VECT_LEN               = 0xb,          /* base 0xfff5 */
+
+       /* Some precomputed offsets into the EEPROM */
+       E2P_DATA_OFFSET                 = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN,
+       E2P_BOOT_CODE_OFFSET            = E2P_DATA_OFFSET + E2P_DATA_LEN,
+};
 
 enum {
        /* indices for ofdm_cal_values */
index 0155a1584ed3699bf89752d22488232248026aab..b3d642833e2cf22dfd5739527c3d2ed6ab085ab1 100644 (file)
@@ -55,7 +55,7 @@ enum {
 #define ZD_NULL_ADDR    ((zd_addr_t)0)
 #define USB_REG(offset)  ZD_ADDR(USB_BASE, offset)     /* word addressing */
 #define CTL_REG(offset)  ZD_ADDR(CR_BASE, offset)      /* byte addressing */
-#define E2P_REG(offset)  ZD_ADDR(E2P_BASE, offset)     /* word addressing */
+#define E2P_DATA(offset)  ZD_ADDR(E2P_BASE, offset)    /* word addressing */
 #define FW_REG(offset)   ZD_ADDR(FW_BASE, offset)      /* word addressing */
 
 static inline zd_addr_t zd_inc_word(zd_addr_t addr)
index b061d11d4ab071f96e9fefa1aff302045853f08f..6a524409aeac76da1cfa5e3d338665843ef576c9 100644 (file)
@@ -152,10 +152,10 @@ static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr)
 
        switch (base) {
        case CR_BASE:
-               offset += CR_BASE_OFFSET;
+               offset += CR_START;
                break;
        case E2P_BASE:
-               offset += E2P_BASE_OFFSET;
+               offset += E2P_START + E2P_DATA_OFFSET;
                break;
        case FW_BASE:
                offset += usb->fw_base_offset;
@@ -297,14 +297,13 @@ static int handle_version_mismatch(struct usb_device *udev, u8 device_type,
        if (r)
                goto error;
 
-       r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START_OFFSET,
-               REBOOT);
+       r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT);
        if (r)
                goto error;
 
-       offset = ((EEPROM_REGS_OFFSET + EEPROM_REGS_SIZE) * sizeof(u16));
+       offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16));
        r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
-               E2P_BASE_OFFSET + EEPROM_REGS_SIZE, REBOOT);
+               E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT);
 
        /* At this point, the vendor driver downloads the whole firmware
         * image, hacks around with version IDs, and uploads it again,
@@ -333,7 +332,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type)
        if (r)
                goto error;
 
-       fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET);
+       fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET);
 
        if (fw_bcdDevice != bcdDevice) {
                dev_info(&udev->dev,
@@ -359,8 +358,7 @@ static int upload_firmware(struct usb_device *udev, u8 device_type)
        if (r)
                goto error;
 
-       r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET,
-                       REBOOT);
+       r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT);
        if (r) {
                dev_err(&udev->dev,
                        "Could not upload firmware code uph. Error number %d\n",
@@ -899,7 +897,7 @@ int zd_usb_init_hw(struct zd_usb *usb)
 
        ZD_ASSERT(mutex_is_locked(&chip->mutex));
        r = zd_ioread16_locked(chip, &usb->fw_base_offset,
-                       USB_REG((u16)FW_BASE_ADDR_OFFSET));
+                       USB_REG(FW_START + FW_REGS_ADDR_OFFSET));
        if (r)
                return r;
        dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n",