ARM: at91: at91sam9m10g45ek: switch to PWM leds

The d6 and d7 is connected to PWM, we can use PWM to control it,
so switch to PWM leds.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 7b76dbde8c41d900919279d8c2ed40c487493348..7ff665a8c7080b2634fd2095e9b24fb550044a4b 100644 (file)
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -105,6 +105,14 @@
                                                         AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;   /* PD29 gpio WP pin pull up */
                                        };
                                };
+
+                               pwm0 {
+                                       pinctrl_pwm_leds: pwm-led {
+                                               atmel,pins =
+                                                       <AT91_PIOD 0  AT91_PERIPH_B AT91_PINCTRL_PULL_UP        /* PD0 periph B */
+                                                        AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;      /* PD31 periph B */
+                                       };
+                               };
                        };
 
                        spi0: spi@fffa4000{
@@ -121,6 +129,13 @@
                                atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>;
                                status = "okay";
                        };
+
+                       pwm0: pwm@fffb8000 {
+                               status = "okay";
+
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_pwm_leds>;
+                       };
                };
 
                fb0: fb@0x00500000 {
@@ -194,16 +209,22 @@
                        gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "heartbeat";
                };
+       };
+
+       pwmleds {
+               compatible = "pwm-leds";
 
                d6 {
                        label = "d6";
-                       gpios = <&pioD 0 GPIO_ACTIVE_LOW>;
+                       pwms = <&pwm0 3 5000 0>;
+                       max-brightness = <255>;
                        linux,default-trigger = "nand-disk";
                };
 
                d7 {
                        label = "d7";
-                       gpios = <&pioD 31 GPIO_ACTIVE_LOW>;
+                       pwms = <&pwm0 1 5000 0>;
+                       max-brightness = <255>;
                        linux,default-trigger = "mmc0";
                };
        };