rt2x00: rt2800pci: use separate ops for the SoC driver
authorGabor Juhos <juhosg@openwrt.org>
Thu, 17 Oct 2013 07:42:26 +0000 (09:42 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 18 Oct 2013 18:06:59 +0000 (14:06 -0400)
This makes it possible to use different callback
functions for PCI and SoC devices which will allow
to move the SoC driver into a separate module.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2800pci.c

index 5ae90df643db0d14381358bc0bc14b517888ce56..344a73ddd3e50b98e9167b7301cf6795b9fa7e16 100644 (file)
@@ -356,6 +356,7 @@ static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
        return retval;
 }
 
+#ifdef CONFIG_PCI
 static const struct ieee80211_ops rt2800pci_mac80211_ops = {
        .tx                     = rt2x00mac_tx,
        .start                  = rt2x00mac_start,
@@ -459,7 +460,6 @@ static const struct rt2x00_ops rt2800pci_ops = {
 /*
  * RT2800pci module information.
  */
-#ifdef CONFIG_PCI
 static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
        { PCI_DEVICE(0x1814, 0x0601) },
        { PCI_DEVICE(0x1814, 0x0681) },
@@ -517,9 +517,109 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
 MODULE_LICENSE("GPL");
 
 #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
+static const struct ieee80211_ops rt2800soc_mac80211_ops = {
+       .tx                     = rt2x00mac_tx,
+       .start                  = rt2x00mac_start,
+       .stop                   = rt2x00mac_stop,
+       .add_interface          = rt2x00mac_add_interface,
+       .remove_interface       = rt2x00mac_remove_interface,
+       .config                 = rt2x00mac_config,
+       .configure_filter       = rt2x00mac_configure_filter,
+       .set_key                = rt2x00mac_set_key,
+       .sw_scan_start          = rt2x00mac_sw_scan_start,
+       .sw_scan_complete       = rt2x00mac_sw_scan_complete,
+       .get_stats              = rt2x00mac_get_stats,
+       .get_tkip_seq           = rt2800_get_tkip_seq,
+       .set_rts_threshold      = rt2800_set_rts_threshold,
+       .sta_add                = rt2x00mac_sta_add,
+       .sta_remove             = rt2x00mac_sta_remove,
+       .bss_info_changed       = rt2x00mac_bss_info_changed,
+       .conf_tx                = rt2800_conf_tx,
+       .get_tsf                = rt2800_get_tsf,
+       .rfkill_poll            = rt2x00mac_rfkill_poll,
+       .ampdu_action           = rt2800_ampdu_action,
+       .flush                  = rt2x00mac_flush,
+       .get_survey             = rt2800_get_survey,
+       .get_ringparam          = rt2x00mac_get_ringparam,
+       .tx_frames_pending      = rt2x00mac_tx_frames_pending,
+};
+
+static const struct rt2800_ops rt2800soc_rt2800_ops = {
+       .register_read          = rt2x00mmio_register_read,
+       .register_read_lock     = rt2x00mmio_register_read, /* same for SoCs */
+       .register_write         = rt2x00mmio_register_write,
+       .register_write_lock    = rt2x00mmio_register_write, /* same for SoCs */
+       .register_multiread     = rt2x00mmio_register_multiread,
+       .register_multiwrite    = rt2x00mmio_register_multiwrite,
+       .regbusy_read           = rt2x00mmio_regbusy_read,
+       .read_eeprom            = rt2800pci_read_eeprom,
+       .hwcrypt_disabled       = rt2800pci_hwcrypt_disabled,
+       .drv_write_firmware     = rt2800pci_write_firmware,
+       .drv_init_registers     = rt2800mmio_init_registers,
+       .drv_get_txwi           = rt2800mmio_get_txwi,
+};
+
+static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
+       .irq_handler            = rt2800mmio_interrupt,
+       .txstatus_tasklet       = rt2800mmio_txstatus_tasklet,
+       .pretbtt_tasklet        = rt2800mmio_pretbtt_tasklet,
+       .tbtt_tasklet           = rt2800mmio_tbtt_tasklet,
+       .rxdone_tasklet         = rt2800mmio_rxdone_tasklet,
+       .autowake_tasklet       = rt2800mmio_autowake_tasklet,
+       .probe_hw               = rt2800_probe_hw,
+       .get_firmware_name      = rt2800pci_get_firmware_name,
+       .check_firmware         = rt2800_check_firmware,
+       .load_firmware          = rt2800_load_firmware,
+       .initialize             = rt2x00mmio_initialize,
+       .uninitialize           = rt2x00mmio_uninitialize,
+       .get_entry_state        = rt2800mmio_get_entry_state,
+       .clear_entry            = rt2800mmio_clear_entry,
+       .set_device_state       = rt2800pci_set_device_state,
+       .rfkill_poll            = rt2800_rfkill_poll,
+       .link_stats             = rt2800_link_stats,
+       .reset_tuner            = rt2800_reset_tuner,
+       .link_tuner             = rt2800_link_tuner,
+       .gain_calibration       = rt2800_gain_calibration,
+       .vco_calibration        = rt2800_vco_calibration,
+       .start_queue            = rt2800mmio_start_queue,
+       .kick_queue             = rt2800mmio_kick_queue,
+       .stop_queue             = rt2800mmio_stop_queue,
+       .flush_queue            = rt2x00mmio_flush_queue,
+       .write_tx_desc          = rt2800mmio_write_tx_desc,
+       .write_tx_data          = rt2800_write_tx_data,
+       .write_beacon           = rt2800_write_beacon,
+       .clear_beacon           = rt2800_clear_beacon,
+       .fill_rxdone            = rt2800mmio_fill_rxdone,
+       .config_shared_key      = rt2800_config_shared_key,
+       .config_pairwise_key    = rt2800_config_pairwise_key,
+       .config_filter          = rt2800_config_filter,
+       .config_intf            = rt2800_config_intf,
+       .config_erp             = rt2800_config_erp,
+       .config_ant             = rt2800_config_ant,
+       .config                 = rt2800_config,
+       .sta_add                = rt2800_sta_add,
+       .sta_remove             = rt2800_sta_remove,
+};
+
+static const struct rt2x00_ops rt2800soc_ops = {
+       .name                   = KBUILD_MODNAME,
+       .drv_data_size          = sizeof(struct rt2800_drv_data),
+       .max_ap_intf            = 8,
+       .eeprom_size            = EEPROM_SIZE,
+       .rf_size                = RF_SIZE,
+       .tx_queues              = NUM_TX_QUEUES,
+       .queue_init             = rt2800mmio_queue_init,
+       .lib                    = &rt2800soc_rt2x00_ops,
+       .drv                    = &rt2800soc_rt2800_ops,
+       .hw                     = &rt2800soc_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+       .debugfs                = &rt2800_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
 static int rt2800soc_probe(struct platform_device *pdev)
 {
-       return rt2x00soc_probe(pdev, &rt2800pci_ops);
+       return rt2x00soc_probe(pdev, &rt2800soc_ops);
 }
 
 static struct platform_driver rt2800soc_driver = {