ARM: dts: omap3-igep0020: use SMSC9221 timings

The IGEPv2 board has a SMSC LAN9221i ethernet chip and not a
SMSC LAN911x connected to the GPMC. Each chip needs different
timings in order to operate correctly so is wrong to include
omap-gpmc-smsc911x.dtsi instead of omap-gpmc-smsc9221.dtsi.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[tony@atomide.com: this is needed to avoid potential memory corruption]
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index b97736d98a6427f087c11bd510909b1007f8c152..e2d163bf061975bff9ac5a6e83ecf6bf4ef98ed3 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -107,7 +107,7 @@
                >;
        };
 
-       smsc911x_pins: pinmux_smsc911x_pins {
+       smsc9221_pins: pinmux_smsc9221_pins {
                pinctrl-single,pins = <
                        0x1a2 (PIN_INPUT | MUX_MODE4)           /* mcspi1_cs2.gpio_176 */
                >;

diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 7abd64f6ae21465c9ac74b22563f8f828a5d684b..b22caaaf774ba710461fcabf395c121c0ccc0482 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -10,7 +10,7 @@
  */
 
 #include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc911x.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
 
 / {
        model = "IGEPv2 (TI OMAP AM/DM37x)";
@@ -248,7 +248,7 @@
 
        ethernet@gpmc {
                pinctrl-names = "default";
-               pinctrl-0 = <&smsc911x_pins>;
+               pinctrl-0 = <&smsc9221_pins>;
                reg = <5 0 0xff>;
                interrupt-parent = <&gpio6>;
                interrupts = <16 IRQ_TYPE_LEVEL_LOW>;