rtc: fixes and new functionality for fm3130
authorSergey Matyukevich <geomatsi@gmail.com>
Wed, 11 Aug 2010 01:02:10 +0000 (18:02 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 11 Aug 2010 15:59:07 +0000 (08:59 -0700)
- add sanity check for alarm data in fm3130_probe

- fix fm3130_set_alarm.

  According to the datasheet, setting match bit '0' indicates that the
  corresponding alarm field will be used in the match process

- add operation alarm_irq_enable operation which is responsible for
  handling RTC_AIE_ON, RTC_AIE_OFF ioctls

- remove clearing of AF bit after reading rtc/alarm control register:
  according to datasheet this bit is cleared anyway when rtc/alarm control
  register is read

[akpm@linux-foundation.org: make fm3130_alarm_irq_enable() static, fix comment layout]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Sergey Lapin <slapin@ossfans.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/rtc-fm3130.c

index e4de8f37ae4a59d2ae6cd03eb39c5cb609141392..4cf2e70c5078a415313799cfec0de806c2766e42 100644 (file)
@@ -52,8 +52,8 @@ struct fm3130 {
        struct i2c_msg          msg[4];
        struct i2c_client       *client;
        struct rtc_device       *rtc;
+       int                     alarm_valid;
        int                     data_valid;
-       int                     alarm;
 };
 static const struct i2c_device_id fm3130_id[] = {
        { "fm3130", 0 },
@@ -87,11 +87,7 @@ static void fm3130_rtc_mode(struct device *dev, int mode)
                dev_dbg(dev, "invalid mode %d\n", mode);
                break;
        }
-       /* Checking for alarm */
-       if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
-               fm3130->alarm = 1;
-               fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
-       }
+
        i2c_smbus_write_byte_data(fm3130->client,
                 FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
 }
@@ -208,6 +204,17 @@ static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
        struct fm3130 *fm3130 = dev_get_drvdata(dev);
        int tmp;
        struct rtc_time *tm = &alrm->time;
+
+       if (!fm3130->alarm_valid) {
+               /*
+                * We have invalid alarm in RTC, probably due to battery faults
+                * or other problems. Return EIO for now, it will allow us to
+                * set alarm value later instead of error during probing which
+                * disables device
+                */
+               return -EIO;
+       }
+
        /* read the RTC alarm registers all at once */
        tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
                        &fm3130->msg[2], 2);
@@ -222,20 +229,31 @@ static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
                        fm3130->regs[FM3130_ALARM_DATE],
                        fm3130->regs[FM3130_ALARM_MONTHS]);
 
-
        tm->tm_sec      = bcd2bin(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
        tm->tm_min      = bcd2bin(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
        tm->tm_hour     = bcd2bin(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
        tm->tm_mday     = bcd2bin(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
        tm->tm_mon      = bcd2bin(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+
        if (tm->tm_mon > 0)
                tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+
        dev_dbg(dev, "%s secs=%d, mins=%d, "
                "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
                "read alarm", tm->tm_sec, tm->tm_min,
                tm->tm_hour, tm->tm_mday,
                tm->tm_mon, tm->tm_year, tm->tm_wday);
 
+       /* check if alarm enabled */
+       fm3130->regs[FM3130_RTC_CONTROL] =
+               i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+       if ((fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AEN) &&
+               (~fm3130->regs[FM3130_RTC_CONTROL] &
+                       FM3130_RTC_CONTROL_BIT_CAL)) {
+               alrm->enabled = 1;
+       }
+
        return 0;
 }
 
@@ -251,25 +269,20 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
                tm->tm_hour, tm->tm_mday,
                tm->tm_mon, tm->tm_year, tm->tm_wday);
 
-       if (tm->tm_sec != -1)
-               fm3130->regs[FM3130_ALARM_SECONDS] =
-                       bin2bcd(tm->tm_sec) | 0x80;
+       fm3130->regs[FM3130_ALARM_SECONDS] =
+               (tm->tm_sec != -1) ? bin2bcd(tm->tm_sec) : 0x80;
 
-       if (tm->tm_min != -1)
-               fm3130->regs[FM3130_ALARM_MINUTES] =
-                       bin2bcd(tm->tm_min) | 0x80;
+       fm3130->regs[FM3130_ALARM_MINUTES] =
+               (tm->tm_min != -1) ? bin2bcd(tm->tm_min) : 0x80;
 
-       if (tm->tm_hour != -1)
-               fm3130->regs[FM3130_ALARM_HOURS] =
-                       bin2bcd(tm->tm_hour) | 0x80;
+       fm3130->regs[FM3130_ALARM_HOURS] =
+               (tm->tm_hour != -1) ? bin2bcd(tm->tm_hour) : 0x80;
 
-       if (tm->tm_mday != -1)
-               fm3130->regs[FM3130_ALARM_DATE] =
-                       bin2bcd(tm->tm_mday) | 0x80;
+       fm3130->regs[FM3130_ALARM_DATE] =
+               (tm->tm_mday != -1) ? bin2bcd(tm->tm_mday) : 0x80;
 
-       if (tm->tm_mon != -1)
-               fm3130->regs[FM3130_ALARM_MONTHS] =
-                       bin2bcd(tm->tm_mon + 1) | 0x80;
+       fm3130->regs[FM3130_ALARM_MONTHS] =
+               (tm->tm_mon != -1) ? bin2bcd(tm->tm_mon + 1) : 0x80;
 
        dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
                        fm3130->regs[FM3130_ALARM_SECONDS],
@@ -285,11 +298,8 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
        }
        fm3130->regs[FM3130_RTC_CONTROL] =
                i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
-       /* Checking for alarm */
-       if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
-               fm3130->alarm = 1;
-               fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
-       }
+
+       /* enable or disable alarm */
        if (alrm->enabled) {
                i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
                        (fm3130->regs[FM3130_RTC_CONTROL] &
@@ -298,16 +308,55 @@ static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
        } else {
                i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
                        fm3130->regs[FM3130_RTC_CONTROL] &
-                               ~(FM3130_RTC_CONTROL_BIT_AEN));
+                               ~(FM3130_RTC_CONTROL_BIT_CAL) &
+                                       ~(FM3130_RTC_CONTROL_BIT_AEN));
        }
+
+       /* We assume here that data is valid once written */
+       if (!fm3130->alarm_valid)
+               fm3130->alarm_valid = 1;
+
        return 0;
 }
 
+static int fm3130_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+       struct fm3130 *fm3130 = dev_get_drvdata(dev);
+       int ret = 0;
+
+       fm3130->regs[FM3130_RTC_CONTROL] =
+               i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+
+       dev_dbg(dev, "alarm_irq_enable: enable=%d, FM3130_RTC_CONTROL=%02x\n",
+               enabled, fm3130->regs[FM3130_RTC_CONTROL]);
+
+       switch (enabled) {
+       case 0:         /* alarm off */
+               ret = i2c_smbus_write_byte_data(fm3130->client,
+                       FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL] &
+                               ~(FM3130_RTC_CONTROL_BIT_CAL) &
+                                       ~(FM3130_RTC_CONTROL_BIT_AEN));
+               break;
+       case 1:         /* alarm on */
+               ret = i2c_smbus_write_byte_data(fm3130->client,
+                       FM3130_RTC_CONTROL, (fm3130->regs[FM3130_RTC_CONTROL] &
+                               ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+                                       FM3130_RTC_CONTROL_BIT_AEN);
+               break;
+       default:
+               ret = -EINVAL;
+               break;
+       }
+
+       return ret;
+}
+
 static const struct rtc_class_ops fm3130_rtc_ops = {
        .read_time      = fm3130_get_time,
        .set_time       = fm3130_set_time,
        .read_alarm     = fm3130_read_alarm,
        .set_alarm      = fm3130_set_alarm,
+       .alarm_irq_enable = fm3130_alarm_irq_enable,
 };
 
 static struct i2c_driver fm3130_driver;
@@ -356,6 +405,7 @@ static int __devinit fm3130_probe(struct i2c_client *client,
        fm3130->msg[3].len = FM3130_ALARM_REGS;
        fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
 
+       fm3130->alarm_valid = 0;
        fm3130->data_valid = 0;
 
        tmp = i2c_transfer(adapter, fm3130->msg, 4);
@@ -370,12 +420,6 @@ static int __devinit fm3130_probe(struct i2c_client *client,
        fm3130->regs[FM3130_CAL_CONTROL] =
                i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
 
-       /* Checking for alarm */
-       if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
-               fm3130->alarm = 1;
-               fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
-       }
-
        /* Disabling calibration mode */
        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
                i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
@@ -400,44 +444,79 @@ static int __devinit fm3130_probe(struct i2c_client *client,
                        fm3130->regs[FM3130_CAL_CONTROL] &
                                ~(FM3130_CAL_CONTROL_BIT_nOSCEN));
 
-       /* oscillator fault?  clear flag, and warn */
-       if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+       /* low battery?  clear flag, and warn */
+       if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) {
+               i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+                       fm3130->regs[FM3130_RTC_CONTROL] &
+                               ~(FM3130_RTC_CONTROL_BIT_LB));
                dev_warn(&client->dev, "Low battery!\n");
+       }
 
-       /* oscillator fault?  clear flag, and warn */
+       /* check if Power On Reset bit is set */
        if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
                i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
                        fm3130->regs[FM3130_RTC_CONTROL] &
                                ~FM3130_RTC_CONTROL_BIT_POR);
-               dev_warn(&client->dev, "SET TIME!\n");
+               dev_dbg(&client->dev, "POR bit is set\n");
        }
        /* ACS is controlled by alarm */
        i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
 
-       /* TODO */
-       /* TODO need to sanity check alarm */
-       tmp = fm3130->regs[FM3130_RTC_SECONDS];
-       tmp = bcd2bin(tmp & 0x7f);
-       if (tmp > 60)
-               goto exit_bad;
+       /* alarm registers sanity check */
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+       if (tmp > 59)
+               goto bad_alarm;
+
        tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
-       if (tmp > 60)
-               goto exit_bad;
+       if (tmp > 59)
+               goto bad_alarm;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+       if (tmp > 23)
+               goto bad_alarm;
 
        tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
        if (tmp == 0 || tmp > 31)
-               goto exit_bad;
+               goto bad_alarm;
 
        tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
        if (tmp == 0 || tmp > 12)
-               goto exit_bad;
+               goto bad_alarm;
 
-       tmp = fm3130->regs[FM3130_RTC_HOURS];
+       fm3130->alarm_valid = 1;
+
+bad_alarm:
+
+       /* clock registers sanity chek */
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+       if (tmp > 59)
+               goto bad_clock;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+       if (tmp > 59)
+               goto bad_clock;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_HOURS] & 0x3f);
+       if (tmp > 23)
+               goto bad_clock;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_DAY] & 0x7);
+       if (tmp == 0 || tmp > 7)
+               goto bad_clock;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+       if (tmp == 0 || tmp > 31)
+               goto bad_clock;
+
+       tmp = bcd2bin(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+       if (tmp == 0 || tmp > 12)
+               goto bad_clock;
 
        fm3130->data_valid = 1;
 
-exit_bad:
-       if (!fm3130->data_valid)
+bad_clock:
+
+       if (!fm3130->data_valid || !fm3130->alarm_valid)
                dev_dbg(&client->dev,
                                "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
                                "%02x %02x %02x %02x %02x %02x %02x\n",