add support for board named RTA770W

Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500

diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 106bf5f86fe89e4ea799fbdb0e6a1f44d3d53b0d..f59fed678167dd9b26dc08bf68d0963808689768 100755 (executable)
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -14,6 +14,8 @@ ucidef_set_interface_loopback
 
 case "$board_name" in
 
+RTA770BW |\
+RTA770W |\
 96348W3 |\
 96358-502V |\
 SPW500V)
@@ -31,7 +33,6 @@ CT6373-1 |\
 D-4P-W |\
 "F@ST2604" |\
 RTA1320_16M |\
-RTA770BW |\
 V2110)
        ucidef_set_interface_lan "eth0"
        ucidef_add_switch "eth0" "1" "1"

diff --git a/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
new file mode 100644 (file)
index 0000000..e0eedad
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+               },
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770W:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770W:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,

diff --git a/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
new file mode 100644 (file)
index 0000000..e0eedad
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+               },
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770W:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770W:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,

diff --git a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
new file mode 100644 (file)
index 0000000..e0eedad
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -796,6 +796,60 @@
+               },
+       },
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++      .name                           = "RTA770W",
++      .expected_cpu_id                = 0x6345,
++
++      .has_uart0                      = 1,
++
++      .has_enet0                      = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .phy_id                 = 0,
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++      .leds = {
++              {
++                      .name           = "RTA770W:green:usb",
++                      .gpio           = 7,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:adsl",
++                      .gpio           = 8,
++              },
++              {
++                      .name           = "RTA770W:green:diag",
++                      .gpio           = 10,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "RTA770W:green:wlan",
++                      .gpio           = 11,
++                      .active_low     = 1,
++              },
++      },
++
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 13,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .active_low     = 1,
++                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++              },
++      },
++};
+ #endif
+ 
+ /*
+@@ -3750,6 +3804,7 @@
+ #ifdef CONFIG_BCM63XX_CPU_6345
+       &board_96345gw2,
+       &board_rta770bw,
++      &board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+       &board_96348r,