The memcpy optimizer was happily doing call slot forwarding when the new memory

was less aligned than the old.  In the testcase this results in an overaligned
memset: the memset alignment was correct for the original memory but is too much
for the new memory.  Fix this by either increasing the alignment of the new
memory or bailing out if that isn't possible.  Should fix the gcc-4.7 self-host
buildbot failure.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165220 91177308-0d34-0410-b5e6-96231b3b80d8

diff --git a/lib/Transforms/Scalar/MemCpyOptimizer.cpp b/lib/Transforms/Scalar/MemCpyOptimizer.cpp
index 35acc7923879499b5f03b7c3736d73db691ec3a3..68be3b7c77fd55f4bdac2a1d6d859a33e0e8d5f0 100644 (file)
--- a/lib/Transforms/Scalar/MemCpyOptimizer.cpp
+++ b/lib/Transforms/Scalar/MemCpyOptimizer.cpp
@@ -332,7 +332,7 @@ namespace {
     bool processMemCpy(MemCpyInst *M);
     bool processMemMove(MemMoveInst *M);
     bool performCallSlotOptzn(Instruction *cpy, Value *cpyDst, Value *cpySrc,
-                              uint64_t cpyLen, CallInst *C);
+                              uint64_t cpyLen, unsigned cpyAlign, CallInst *C);
     bool processMemCpyMemCpyDependence(MemCpyInst *M, MemCpyInst *MDep,
                                        uint64_t MSize);
     bool processByValArgument(CallSite CS, unsigned ArgNo);
@@ -509,10 +509,18 @@ bool MemCpyOpt::processStore(StoreInst *SI, BasicBlock::iterator &BBI) {
       }
 
       if (C) {
+        unsigned storeAlign = SI->getAlignment();
+        if (!storeAlign)
+          storeAlign = TD->getABITypeAlignment(SI->getOperand(0)->getType());
+        unsigned loadAlign = LI->getAlignment();
+        if (!loadAlign)
+          loadAlign = TD->getABITypeAlignment(LI->getType());
+
         bool changed = performCallSlotOptzn(LI,
                         SI->getPointerOperand()->stripPointerCasts(),
                         LI->getPointerOperand()->stripPointerCasts(),
-                        TD->getTypeStoreSize(SI->getOperand(0)->getType()), C);
+                        TD->getTypeStoreSize(SI->getOperand(0)->getType()),
+                        std::min(storeAlign, loadAlign), C);
         if (changed) {
           MD->removeInstruction(SI);
           SI->eraseFromParent();
@@ -559,7 +567,8 @@ bool MemCpyOpt::processMemSet(MemSetInst *MSI, BasicBlock::iterator &BBI) {
 /// the call write its result directly into the destination of the memcpy.
 bool MemCpyOpt::performCallSlotOptzn(Instruction *cpy,
                                      Value *cpyDest, Value *cpySrc,
-                                     uint64_t cpyLen, CallInst *C) {
+                                     uint64_t cpyLen, unsigned cpyAlign,
+                                     CallInst *C) {
   // The general transformation to keep in mind is
   //
   //   call @func(..., src, ...)
@@ -596,6 +605,16 @@ bool MemCpyOpt::performCallSlotOptzn(Instruction *cpy,
   if (cpyLen < srcSize)
     return false;
 
+  // Check that dest points to memory that is at least as aligned as src.
+  unsigned srcAlign = srcAlloca->getAlignment();
+  if (!srcAlign)
+    srcAlign = TD->getABITypeAlignment(srcAlloca->getAllocatedType());
+  bool isDestSufficientlyAligned = srcAlign <= cpyAlign;
+  // If dest is not aligned enough and we can't increase its alignment then
+  // bail out.
+  if (!isDestSufficientlyAligned && !isa<AllocaInst>(cpyDest))
+    return false;
+
   // Check that accessing the first srcSize bytes of dest will not cause a
   // trap.  Otherwise the transform is invalid since it might cause a trap
   // to occur earlier than it otherwise would.
@@ -687,6 +706,12 @@ bool MemCpyOpt::performCallSlotOptzn(Instruction *cpy,
   if (!changedArgument)
     return false;
 
+  // If the destination wasn't sufficiently aligned then increase its alignment.
+  if (!isDestSufficientlyAligned) {
+    assert(isa<AllocaInst>(cpyDest) && "Can only increase alloca alignment!");
+    cast<AllocaInst>(cpyDest)->setAlignment(srcAlign);
+  }
+
   // Drop any cached information about the call, because we may have changed
   // its dependence information by changing its parameter.
   MD->removeInstruction(C);
@@ -813,7 +838,8 @@ bool MemCpyOpt::processMemCpy(MemCpyInst *M) {
   if (DepInfo.isClobber()) {
     if (CallInst *C = dyn_cast<CallInst>(DepInfo.getInst())) {
       if (performCallSlotOptzn(M, M->getDest(), M->getSource(),
-                               CopySize->getZExtValue(), C)) {
+                               CopySize->getZExtValue(), M->getAlignment(),
+                               C)) {
         MD->removeInstruction(M);
         M->eraseFromParent();
         return true;

diff --git a/test/Transforms/MemCpyOpt/align.ll b/test/Transforms/MemCpyOpt/align.ll
index b1f900d9da4c6e7723809431ee748a4e97a99840..1b98f6ad383f9ebc4e0392bc3ac0e77480d6be3b 100644 (file)
--- a/test/Transforms/MemCpyOpt/align.ll
+++ b/test/Transforms/MemCpyOpt/align.ll
@@ -1,12 +1,15 @@
-; RUN: opt < %s -S -memcpyopt | FileCheck %s
+; RUN: opt < %s -S -basicaa -memcpyopt | FileCheck %s
 target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64"
 
+declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture, i8* nocapture, i64, i32, i1) nounwind
+declare void @llvm.memset.p0i8.i64(i8* nocapture, i8, i64, i32, i1) nounwind
+
 ; The resulting memset is only 4-byte aligned, despite containing
 ; a 16-byte aligned store in the middle.
 
-; CHECK: call void @llvm.memset.p0i8.i64(i8* {{.*}}, i8 0, i64 16, i32 4, i1 false)
-
 define void @foo(i32* %p) {
+; CHECK: @foo
+; CHECK: call void @llvm.memset.p0i8.i64(i8* {{.*}}, i8 0, i64 16, i32 4, i1 false)
   %a0 = getelementptr i32* %p, i64 0
   store i32 0, i32* %a0, align 4
   %a1 = getelementptr i32* %p, i64 1
@@ -17,3 +20,18 @@ define void @foo(i32* %p) {
   store i32 0, i32* %a3, align 4
   ret void
 }
+
+; Replacing %a8 with %a4 in the memset requires boosting the alignment of %a4.
+
+define void @bar() {
+; CHECK: @bar
+; CHECK: %a4 = alloca i32, align 8
+; CHECK-NOT: memcpy
+  %a4 = alloca i32, align 4
+  %a8 = alloca i32, align 8
+  %a8.cast = bitcast i32* %a8 to i8*
+  %a4.cast = bitcast i32* %a4 to i8*
+  call void @llvm.memset.p0i8.i64(i8* %a8.cast, i8 0, i64 4, i32 8, i1 false)
+  call void @llvm.memcpy.p0i8.p0i8.i64(i8* %a4.cast, i8* %a8.cast, i64 4, i32 4, i1 false)
+  ret void
+}