MIPS: au1000_eth: Get ethernet address from platform_data
authorManuel Lauss <manuel.lauss@googlemail.com>
Wed, 21 Jul 2010 12:30:50 +0000 (14:30 +0200)
committerRalf Baechle <ralf@linux-mips.org>
Thu, 5 Aug 2010 12:26:09 +0000 (13:26 +0100)
au1000_eth uses firmware calls to get a valid MAC address, and changes
it depending on platform device id.  This patch moves this logic out of
the driver into the platform device registration part, where boards with
supported chips can use whatever firmware interface they need; the default
implementation maintains compatibility with existing, YAMON-based firmware.

Tested-by: Wolfgang Grandegger <wg@denx.de>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1481/
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/alchemy/common/platform.c
arch/mips/include/asm/mach-au1x00/au1xxx_eth.h
drivers/net/au1000_eth.c

index c233d64a0d6059f8a5b35c9cdb5af5cf14a3c38b..1dc55ee2681b01ee5841524083c78b2360245966 100644 (file)
@@ -12,6 +12,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
@@ -21,6 +22,8 @@
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
 
+#include <prom.h>
+
 #define PORT(_base, _irq)                                      \
        {                                                       \
                .mapbase        = _base,                        \
@@ -434,17 +437,27 @@ static int __init au1xxx_platform_init(void)
 {
        unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
        int err, i;
+       unsigned char ethaddr[6];
 
        /* Fill up uartclk. */
        for (i = 0; au1x00_uart_data[i].flags; i++)
                au1x00_uart_data[i].uartclk = uartclk;
 
+       /* use firmware-provided mac addr if available and necessary */
+       i = prom_get_ethernet_addr(ethaddr);
+       if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
+               memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
+
        err = platform_add_devices(au1xxx_platform_devices,
                                   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
+       ethaddr[5] += 1;        /* next addr for 2nd MAC */
+       if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
+               memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
+
        /* Register second MAC if enabled in pinfunc */
        if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
-               platform_device_register(&au1xxx_eth1_device);
+               err = platform_device_register(&au1xxx_eth1_device);
 #endif
 
        return err;
index bae9b758fcde85bb3b8ebd1298480cc642b38af6..49dc8d9db186fec5b1ab279243785391839428fa 100644 (file)
@@ -9,6 +9,7 @@ struct au1000_eth_platform_data {
        int phy_addr;
        int phy_busid;
        int phy_irq;
+       char mac[6];
 };
 
 void __init au1xxx_override_eth_cfg(unsigned port,
index ece6128bef146aa330f98f486d23f2bed1c15ed5..17e7e27eb2227d936b3432ead5a7b35ef107d354 100644 (file)
@@ -104,14 +104,6 @@ MODULE_VERSION(DRV_VERSION);
  * complete immediately.
  */
 
-/* These addresses are only used if yamon doesn't tell us what
- * the mac address is, and the mac address is not passed on the
- * command line.
- */
-static unsigned char au1000_mac_addr[6] __devinitdata = {
-       0x00, 0x50, 0xc2, 0x0c, 0x30, 0x00
-};
-
 struct au1000_private *au_macs[NUM_ETH_INTERFACES];
 
 /*
@@ -1002,7 +994,6 @@ static int __devinit au1000_probe(struct platform_device *pdev)
        db_dest_t *pDB, *pDBfree;
        int irq, i, err = 0;
        struct resource *base, *macen;
-       char ethaddr[6];
 
        base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!base) {
@@ -1079,24 +1070,13 @@ static int __devinit au1000_probe(struct platform_device *pdev)
        }
        aup->mac_id = pdev->id;
 
-       if (pdev->id == 0) {
-               if (prom_get_ethernet_addr(ethaddr) == 0)
-                       memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
-               else {
-                       netdev_info(dev, "No MAC address found\n");
-                               /* Use the hard coded MAC addresses */
-               }
-
+       if (pdev->id == 0)
                au1000_setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-       else if (pdev->id == 1)
+       else if (pdev->id == 1)
                au1000_setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
 
-       /*
-        * Assign to the Ethernet ports two consecutive MAC addresses
-        * to match those that are printed on their stickers
-        */
-       memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
-       dev->dev_addr[5] += pdev->id;
+       /* set a random MAC now in case platform_data doesn't provide one */
+       random_ether_addr(dev->dev_addr);
 
        *aup->enable = 0;
        aup->mac_enabled = 0;
@@ -1106,6 +1086,9 @@ static int __devinit au1000_probe(struct platform_device *pdev)
                dev_info(&pdev->dev, "no platform_data passed, PHY search on MAC0\n");
                aup->phy1_search_mac0 = 1;
        } else {
+               if (is_valid_ether_addr(pd->mac))
+                       memcpy(dev->dev_addr, pd->mac, 6);
+
                aup->phy_static_config = pd->phy_static_config;
                aup->phy_search_highest_addr = pd->phy_search_highest_addr;
                aup->phy1_search_mac0 = pd->phy1_search_mac0;