machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SH03) += mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear
machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d
machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh
machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
# Specific board support, not covered by a mach group.
#
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o
obj-$(CONFIG_SH_SH2007) += board-sh2007.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
--- /dev/null
+/*
+ * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <mach/secureedge5410.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+unsigned short secureedge5410_ioport;
+
+/*
+ * EraseConfig handling functions
+ */
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+ ctrl_delay(); /* dummy read */
+
+ printk("SnapGear: erase switch interrupt!\n");
+
+ return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+ unsigned int irq = evt2irq(0x240);
+
+ printk("SnapGear: EraseConfig init\n");
+
+ /* Setup "EraseConfig" switch on external IRQ 0 */
+ if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
+ "Erase Config", NULL))
+ printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+ irq);
+ else
+ printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+ irq);
+ return 0;
+}
+module_init(eraseconfig_init);
+
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+static void __init init_snapgear_IRQ(void)
+{
+ printk("Setup SnapGear IRQ/IPR ...\n");
+ /* enable individual interrupt mode for externals */
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+ .mv_name = "SnapGear SecureEdge5410",
+ .mv_nr_irqs = 72,
+ .mv_init_irq = init_snapgear_IRQ,
+};
+++ /dev/null
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y := setup.o
+++ /dev/null
-/*
- * Copyright (C) 2002 David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <mach/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <cpu/timer.h>
-
-unsigned short secureedge5410_ioport;
-
-/*
- * EraseConfig handling functions
- */
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
- ctrl_delay(); /* dummy read */
-
- printk("SnapGear: erase switch interrupt!\n");
-
- return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
- unsigned int irq = evt2irq(0x240);
-
- printk("SnapGear: EraseConfig init\n");
-
- /* Setup "EraseConfig" switch on external IRQ 0 */
- if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
- "Erase Config", NULL))
- printk("SnapGear: failed to register IRQ%d for Reset witch\n",
- irq);
- else
- printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
- irq);
- return 0;
-}
-module_init(eraseconfig_init);
-
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-static void __init init_snapgear_IRQ(void)
-{
- printk("Setup SnapGear IRQ/IPR ...\n");
- /* enable individual interrupt mode for externals */
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
- .mv_name = "SnapGear SecureEdge5410",
- .mv_nr_irqs = 72,
- .mv_init_irq = init_snapgear_IRQ,
-};
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SECUREEDGE5410=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_PCI=y
+CONFIG_NET=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK_RO=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_SLAB=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_CPU_SUBTYPE_SH7751R=y
-CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_SH_SECUREEDGE5410=y
-CONFIG_SH_DMA=y
-CONFIG_SH_DMA_API=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1302=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
--- /dev/null
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#define __IO_PREFIX snapgear
+#include <asm/io_generic.h>
+
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit Read Write
+ * -----------------------------------------------
+ * D0 DCD on ttySC1 power
+ * D1 Reset Switch heatbeat
+ * D2 ttySC0 CTS (7100) LAN
+ * D3 - WAN
+ * D4 ttySC0 DCD (7100) CONSOLE
+ * D5 - ONLINE
+ * D6 - VPN
+ * D7 - DTR on ttySC1
+ * D8 - ttySC0 RTS (7100)
+ * D9 - ttySC0 DTR (7100)
+ * D10 - RTC SCLK
+ * D11 RTC DATA RTC DATA
+ * D12 - RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+ (secureedge5410_ioport = \
+ ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+ ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
+++ /dev/null
-/*
- * include/asm-sh/snapgear.h
- *
- * Modified version of io_se.h for the snapgear-specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for a SnapGear
- */
-
-#ifndef _ASM_SH_IO_SNAPGEAR_H
-#define _ASM_SH_IO_SNAPGEAR_H
-
-#define __IO_PREFIX snapgear
-#include <asm/io_generic.h>
-
-/*
- * We need to remember what was written to the ioport as some bits
- * are shared with other functions and you cannot read back what was
- * written :-|
- *
- * Bit Read Write
- * -----------------------------------------------
- * D0 DCD on ttySC1 power
- * D1 Reset Switch heatbeat
- * D2 ttySC0 CTS (7100) LAN
- * D3 - WAN
- * D4 ttySC0 DCD (7100) CONSOLE
- * D5 - ONLINE
- * D6 - VPN
- * D7 - DTR on ttySC1
- * D8 - ttySC0 RTS (7100)
- * D9 - ttySC0 DTR (7100)
- * D10 - RTC SCLK
- * D11 RTC DATA RTC DATA
- * D12 - RTS RESET
- */
-
-#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
-extern unsigned short secureedge5410_ioport;
-
-#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
- (secureedge5410_ioport = \
- ((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
-#define SECUREEDGE_READ_IOPORT() \
- ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
-
-#endif /* _ASM_SH_IO_SNAPGEAR_H */
#ifdef CONFIG_SH_SECUREEDGE5410
#include <asm/rtc.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
#define RTC_RESET 0x1000
#define RTC_IODATA 0x0800
projects / firefly-linux-kernel-4.4.55.git / commitdiff