staging: comedi: quatech_daqp_cs: tidy up command register bits
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Mon, 5 Oct 2015 21:23:01 +0000 (14:23 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 13 Oct 2015 04:16:05 +0000 (21:16 -0700)
For aesthetics, move the bit defines for this register and use the
BIT macro to define the bits. Define a macro for the scanrate bits
and use it to remove the CamelCase. Rename the defines to match the
register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/quatech_daqp_cs.c

index 29df086aa37ef9a7f595edf794a3bfa72034927c..b7a20f7e9f35f00b875f81c74b9f88a0b8ccc7d9 100644 (file)
 
 #define DAQP_DI_REG                    0x03
 #define DAQP_DO_REG                    0x03
+
 #define DAQP_PACER_LOW_REG             0x04
 #define DAQP_PACER_MID_REG             0x05
 #define DAQP_PACER_HIGH_REG            0x06
+
 #define DAQP_CMD_REG                   0x07
+/* the monostable bits are self-clearing after the function is complete */
+#define DAQP_CMD_ARM                   BIT(7)  /* monostable */
+#define DAQP_CMD_RSTF                  BIT(6)  /* monostable */
+#define DAQP_CMD_RSTQ                  BIT(5)  /* monostable */
+#define DAQP_CMD_STOP                  BIT(4)  /* monostable */
+#define DAQP_CMD_LATCH                 BIT(3)  /* monostable */
+#define DAQP_CMD_SCANRATE(x)           (((x) & 0x3) << 1)
+#define DAQP_CMD_SCANRATE_100KHZ       DAQP_CMD_SCANRATE(0)
+#define DAQP_CMD_SCANRATE_50KHZ                DAQP_CMD_SCANRATE(1)
+#define DAQP_CMD_SCANRATE_25KHZ                DAQP_CMD_SCANRATE(2)
+#define DAQP_CMD_FIFO_DATA             BIT(0)
+
 #define DAQP_AO_REG                    0x08
 #define DAQP_TIMER_REG                 0x0a
 #define DAQP_AUX_REG                   0x0f
 
-#define DAQP_COMMAND_ARM               0x80
-#define DAQP_COMMAND_RSTF              0x40
-#define DAQP_COMMAND_RSTQ              0x20
-#define DAQP_COMMAND_STOP              0x10
-#define DAQP_COMMAND_LATCH             0x08
-#define DAQP_COMMAND_100kHz            0x00
-#define DAQP_COMMAND_50kHz             0x02
-#define DAQP_COMMAND_25kHz             0x04
-#define DAQP_COMMAND_FIFO_DATA         0x01
-#define DAQP_COMMAND_FIFO_PROGRAM      0x00
-
 #define DAQP_AUX_TRIGGER_TTL           0x00
 #define DAQP_AUX_TRIGGER_ANALOG                0x80
 #define DAQP_AUX_TRIGGER_PRETRIGGER    0x40
@@ -181,10 +184,10 @@ static int daqp_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
        if (devpriv->stop)
                return -EIO;
 
-       outb(DAQP_COMMAND_STOP, dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_STOP, dev->iobase + DAQP_CMD_REG);
 
        /* flush any linguring data in FIFO - superfluous here */
-       /* outb(DAQP_COMMAND_RSTF, dev->iobase + DAQP_CMD_REG); */
+       /* outb(DAQP_CMD_RSTF, dev->iobase + DAQP_CMD_REG); */
 
        devpriv->interrupt_mode = semaphore;
 
@@ -310,14 +313,14 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
        outb(0, dev->iobase + DAQP_AUX_REG);
 
        /* Reset scan list queue */
-       outb(DAQP_COMMAND_RSTQ, dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_RSTQ, dev->iobase + DAQP_CMD_REG);
 
        /* Program one scan list entry */
        daqp_ai_set_one_scanlist_entry(dev, insn->chanspec, 1);
 
        /* Reset data FIFO (see page 28 of DAQP User's Manual) */
 
-       outb(DAQP_COMMAND_RSTF, dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_RSTF, dev->iobase + DAQP_CMD_REG);
 
        /* Set trigger - one-shot, internal */
        outb(DAQP_CTRL_PACER_CLK_100KHZ | DAQP_CTRL_EOS_INT_ENA,
@@ -332,7 +335,7 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
 
        for (i = 0; i < insn->n; i++) {
                /* Start conversion */
-               outb(DAQP_COMMAND_ARM | DAQP_COMMAND_FIFO_DATA,
+               outb(DAQP_CMD_ARM | DAQP_CMD_FIFO_DATA,
                     dev->iobase + DAQP_CMD_REG);
 
                /* Wait for interrupt service routine to unblock completion */
@@ -477,7 +480,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        outb(0, dev->iobase + DAQP_AUX_REG);
 
        /* Reset scan list queue */
-       outb(DAQP_COMMAND_RSTQ, dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_RSTQ, dev->iobase + DAQP_CMD_REG);
 
        /* Program pacer clock
         *
@@ -595,7 +598,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
        /* Reset data FIFO (see page 28 of DAQP User's Manual) */
 
-       outb(DAQP_COMMAND_RSTF, dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_RSTF, dev->iobase + DAQP_CMD_REG);
 
        /* Set FIFO threshold.  First two bytes are near-empty
         * threshold, which is unused; next two bytes are near-full
@@ -623,8 +626,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
        devpriv->interrupt_mode = buffer;
 
        /* Start conversion */
-       outb(DAQP_COMMAND_ARM | DAQP_COMMAND_FIFO_DATA,
-            dev->iobase + DAQP_CMD_REG);
+       outb(DAQP_CMD_ARM | DAQP_CMD_FIFO_DATA, dev->iobase + DAQP_CMD_REG);
 
        return 0;
 }